All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions
Date: Sun, 14 Aug 2011 13:17:03 +0300	[thread overview]
Message-ID: <1313317059-16567-5-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

In order to keep to driver compiling during the patchset,
while avoiding one-huge-patch, temporarily disable some
advanced ap functions.

These changes will be reverted later in the patchset, as
part of the patches for advanced ap functions support.

Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: don't disable 11n

 drivers/net/wireless/wl12xx/main.c |    4 ++++
 drivers/net/wireless/wl12xx/tx.c   |    4 ++++
 2 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 7b29573..4fa7602 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -770,12 +770,13 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	kfree(wl->target_mem_map);
 	wl->target_mem_map = NULL;
 
 	return ret;
 }
 
+#if 0
 static void wl1271_irq_ps_regulate_link(struct wl1271 *wl, u8 hlid, u8 tx_blks)
 {
 	bool fw_ps;
 
 	/* only regulate station links */
 	if (hlid < WL1271_AP_STA_HLID_START)
@@ -820,12 +821,13 @@ static void wl1271_irq_update_links_status(struct wl1271 *wl,
 		wl->links[hlid].allocated_blks -= cnt;
 
 		wl1271_irq_ps_regulate_link(wl, hlid,
 					    wl->links[hlid].allocated_blks);
 	}
 }
+#endif
 
 static void wl1271_fw_status(struct wl1271 *wl,
 			     struct wl1271_fw_full_status *full_status)
 {
 	struct wl1271_fw_common_status *status = &full_status->common;
 	struct timespec ts;
@@ -858,13 +860,15 @@ static void wl1271_fw_status(struct wl1271 *wl,
 	}
 
 	wl->tx_allocated_blocks -= freed_blocks;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS) {
 		/* Update num of allocated TX blocks per link and ps status */
+#if 0
 		wl1271_irq_update_links_status(wl, &full_status->ap);
+#endif
 		wl->tx_blocks_available += freed_blocks;
 	} else {
 		int avail = full_status->sta.tx_total - wl->tx_allocated_blocks;
 
 		/*
 		 * The FW might change the total number of TX memblocks before
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index c67340f..938af1d 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -108,12 +108,13 @@ static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
 	hdr = (struct ieee80211_hdr *)(skb->data +
 				       sizeof(struct wl1271_tx_hw_descr));
 	if (ieee80211_is_auth(hdr->frame_control))
 		wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
 }
 
+#if 0
 static void wl1271_tx_regulate_link(struct wl1271 *wl, u8 hlid)
 {
 	bool fw_ps;
 	u8 tx_blks;
 
 	/* only regulate station links */
@@ -127,12 +128,13 @@ static void wl1271_tx_regulate_link(struct wl1271 *wl, u8 hlid)
 	 * if in FW PS and there is enough data in FW we can put the link
 	 * into high-level PS and clean out its TX queues.
 	 */
 	if (fw_ps && tx_blks >= WL1271_PS_STA_MAX_BLOCKS)
 		wl1271_ps_link_start(wl, hlid, true);
 }
+#endif
 
 u8 wl1271_tx_get_hlid(struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *control = IEEE80211_SKB_CB(skb);
 
 	if (control->control.sta) {
@@ -381,13 +383,15 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
 		return ret;
 
 	wl1271_tx_fill_hdr(wl, skb, extra, info, hlid);
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS) {
 		wl1271_tx_ap_update_inconnection_sta(wl, skb);
+#if 0
 		wl1271_tx_regulate_link(wl, hlid);
+#endif
 	} else {
 		wl1271_tx_update_filters(wl, skb);
 	}
 
 	/*
 	 * The length of each packet is stored in terms of
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-5-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.