All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode
Date: Sun, 14 Aug 2011 13:17:23 +0300	[thread overview]
Message-ID: <1313317059-16567-25-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

After adding a station, call wl12xx_cmd_set_peer_state().
This is required for 11n support.

Change wl12xx_cmd_set_peer_state() prototype to get hlid
as param.

Signed-off-by: Eliad Peller <eliad@wizery.com>
---
 drivers/net/wireless/wl12xx/cmd.c  |    6 +++---
 drivers/net/wireless/wl12xx/cmd.h  |    2 +-
 drivers/net/wireless/wl12xx/main.c |    6 +++++-
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 025fb14..d655e62 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -1318,26 +1318,26 @@ int wl1271_cmd_set_ap_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 
 out:
 	kfree(cmd);
 	return ret;
 }
 
-int wl12xx_cmd_set_peer_state(struct wl1271 *wl)
+int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid)
 {
 	struct wl12xx_cmd_set_peer_state *cmd;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_CMD, "cmd set peer state (hlid=%d)", wl->sta_hlid);
+	wl1271_debug(DEBUG_CMD, "cmd set peer state (hlid=%d)", hlid);
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (!cmd) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	cmd->hlid = wl->sta_hlid;
+	cmd->hlid = hlid;
 	cmd->state = WL1271_CMD_STA_STATE_CONNECTED;
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PEER_STATE, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("failed to send set peer state command");
 		goto out_free;
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index 8b32a57..740d27e 100644
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -67,13 +67,13 @@ int wl12xx_cmd_set_default_wep_key(struct wl1271 *wl, u8 id, u8 hlid);
 int wl1271_cmd_set_sta_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 			   u8 key_size, const u8 *key, const u8 *addr,
 			   u32 tx_seq_32, u16 tx_seq_16);
 int wl1271_cmd_set_ap_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 			  u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32,
 			  u16 tx_seq_16);
-int wl12xx_cmd_set_peer_state(struct wl1271 *wl);
+int wl12xx_cmd_set_peer_state(struct wl1271 *wl, u8 hlid);
 int wl12xx_roc(struct wl1271 *wl, u8 role_id);
 int wl12xx_croc(struct wl1271 *wl, u8 role_id);
 int wl12xx_cmd_add_peer(struct wl1271 *wl, struct ieee80211_sta *sta, u8 hlid);
 int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid);
 int wl12xx_cmd_config_fwlog(struct wl1271 *wl);
 int wl12xx_cmd_start_fwlog(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index bf9b27d..9b0df66 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -392,13 +392,13 @@ static int wl1271_check_operstate(struct wl1271 *wl, unsigned char operstate)
 	if (operstate != IF_OPER_UP)
 		return 0;
 
 	if (test_and_set_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags))
 		return 0;
 
-	ret = wl12xx_cmd_set_peer_state(wl);
+	ret = wl12xx_cmd_set_peer_state(wl, wl->sta_hlid);
 	if (ret < 0)
 		return ret;
 
 	wl12xx_croc(wl, wl->role_id);
 
 	wl1271_info("Association completed.");
@@ -3673,12 +3673,16 @@ static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 		goto out_free_sta;
 
 	ret = wl12xx_cmd_add_peer(wl, sta, hlid);
 	if (ret < 0)
 		goto out_sleep;
 
+	ret = wl12xx_cmd_set_peer_state(wl, hlid);
+	if (ret < 0)
+		goto out_sleep;
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
 out_free_sta:
 	if (ret < 0)
 		wl1271_free_sta(wl, hlid);
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-25-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.