From: Simon Horman <horms+renesas@verge.net.au> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: mach-shmobile: r8a7779: Minimal setup using DT Date: Thu, 31 Jan 2013 01:50:50 +0000 [thread overview] Message-ID: <1359597051-32700-4-git-send-email-horms+renesas@verge.net.au> (raw) In-Reply-To: <1359597051-32700-1-git-send-email-horms+renesas@verge.net.au> Allow a minimal setup of the r8a7779 SoC using a flattened device tree. In particular, configure the i2c and ethernet controllers using a flattened device tree. SCI serial controller and TMU clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. The ethernet controller also requires a regulator which is a board property. A sample snippet DT for the marzen board is as follows: /dts-v1/; /include/ "r8a7779.dtsi" / { fixedregulator3v3: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; &lan0 { vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7779.dtsi | 45 ++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/common.h | 2 + arch/arm/mach-shmobile/setup-r8a7779.c | 58 +++++++++++++++++++++++--- 3 files changed, 99 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index eadc12e..9564040 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -37,4 +37,49 @@ reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; }; + + i2c0: i2c@0xffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 0x4>; + }; + + i2c1: i2c@0xffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 0x4>; + }; + + i2c2: i2c@0xffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 0x4>; + }; + + i2c3: i2c@0xffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 0x4>; + }; + + lan0: lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + }; }; diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 8ef7ebb..4b85b18 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -67,7 +67,9 @@ extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); +extern void r8a7779_add_early_devices_dt(void); extern void r8a7779_add_standard_devices(void); +extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index c54ff9b..d4818c2 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -321,7 +321,7 @@ static struct platform_device i2c3_device = { .num_resources = ARRAY_SIZE(rcar_i2c3_res), }; -static struct platform_device *r8a7779_early_devices[] __initdata = { +static struct platform_device *r8a7779_early_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -330,15 +330,15 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, +}; + +static struct platform_device *r8a7779_early_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, &i2c3_device, }; -static struct platform_device *r8a7779_late_devices[] __initdata = { -}; - void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 @@ -349,10 +349,10 @@ void __init r8a7779_add_standard_devices(void) r8a7779_init_pm_domains(); + platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); - platform_add_devices(r8a7779_late_devices, - ARRAY_SIZE(r8a7779_late_devices)); } /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ @@ -367,6 +367,8 @@ void __init r8a7779_earlytimer_init(void) void __init r8a7779_add_early_devices(void) { + early_platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); early_platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); @@ -386,3 +388,47 @@ void __init r8a7779_add_early_devices(void) * command line in case of the marzen board. */ } + +#ifdef CONFIG_USE_OF +void __init r8a7779_add_early_devices_dt(void) +{ + shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ + + early_platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); + + /* Early serial console setup is not included here. + * See comment in r8a7779_add_early_devices(). + */ +} + +static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { + {}, +}; + +void __init r8a7779_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7779_clock_init(); + + platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); + of_platform_populate(NULL, of_default_bus_match_table, + r8a7779_auxdata_lookup, NULL); +} + +static const char *r8a7779_compat_dt[] __initdata = { + "renesas,r8a7779", + NULL, +}; + +DT_MACHINE_START(SH73A0_DT, "Generic R8A7779 (Flattened Device Tree)") + .map_io = r8a7779_map_io, + .init_early = r8a7779_add_early_devices_dt, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = r8a7779_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a7779_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: mach-shmobile: r8a7779: Minimal setup using DT Date: Thu, 31 Jan 2013 10:50:50 +0900 [thread overview] Message-ID: <1359597051-32700-4-git-send-email-horms+renesas@verge.net.au> (raw) In-Reply-To: <1359597051-32700-1-git-send-email-horms+renesas@verge.net.au> Allow a minimal setup of the r8a7779 SoC using a flattened device tree. In particular, configure the i2c and ethernet controllers using a flattened device tree. SCI serial controller and TMU clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. The ethernet controller also requires a regulator which is a board property. A sample snippet DT for the marzen board is as follows: /dts-v1/; /include/ "r8a7779.dtsi" / { fixedregulator3v3: fixedregulator at 0 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; &lan0 { vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7779.dtsi | 45 ++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/common.h | 2 + arch/arm/mach-shmobile/setup-r8a7779.c | 58 +++++++++++++++++++++++--- 3 files changed, 99 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index eadc12e..9564040 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -37,4 +37,49 @@ reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; }; + + i2c0: i2c at 0xffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 0x4>; + }; + + i2c1: i2c at 0xffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 0x4>; + }; + + i2c2: i2c at 0xffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 0x4>; + }; + + i2c3: i2c at 0xffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 0x4>; + }; + + lan0: lan0 at 18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + }; }; diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 8ef7ebb..4b85b18 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -67,7 +67,9 @@ extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); +extern void r8a7779_add_early_devices_dt(void); extern void r8a7779_add_standard_devices(void); +extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index c54ff9b..d4818c2 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -321,7 +321,7 @@ static struct platform_device i2c3_device = { .num_resources = ARRAY_SIZE(rcar_i2c3_res), }; -static struct platform_device *r8a7779_early_devices[] __initdata = { +static struct platform_device *r8a7779_early_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -330,15 +330,15 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, +}; + +static struct platform_device *r8a7779_early_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, &i2c3_device, }; -static struct platform_device *r8a7779_late_devices[] __initdata = { -}; - void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 @@ -349,10 +349,10 @@ void __init r8a7779_add_standard_devices(void) r8a7779_init_pm_domains(); + platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); - platform_add_devices(r8a7779_late_devices, - ARRAY_SIZE(r8a7779_late_devices)); } /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ @@ -367,6 +367,8 @@ void __init r8a7779_earlytimer_init(void) void __init r8a7779_add_early_devices(void) { + early_platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); early_platform_add_devices(r8a7779_early_devices, ARRAY_SIZE(r8a7779_early_devices)); @@ -386,3 +388,47 @@ void __init r8a7779_add_early_devices(void) * command line in case of the marzen board. */ } + +#ifdef CONFIG_USE_OF +void __init r8a7779_add_early_devices_dt(void) +{ + shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ + + early_platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); + + /* Early serial console setup is not included here. + * See comment in r8a7779_add_early_devices(). + */ +} + +static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { + {}, +}; + +void __init r8a7779_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7779_clock_init(); + + platform_add_devices(r8a7779_early_devices_dt, + ARRAY_SIZE(r8a7779_early_devices_dt)); + of_platform_populate(NULL, of_default_bus_match_table, + r8a7779_auxdata_lookup, NULL); +} + +static const char *r8a7779_compat_dt[] __initdata = { + "renesas,r8a7779", + NULL, +}; + +DT_MACHINE_START(SH73A0_DT, "Generic R8A7779 (Flattened Device Tree)") + .map_io = r8a7779_map_io, + .init_early = r8a7779_add_early_devices_dt, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = r8a7779_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a7779_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ -- 1.7.10.4
next prev parent reply other threads:[~2013-01-31 1:50 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-01-31 1:50 ARM: mach-shmobile: r8a7779, marzen: Reference DT implementation Simon Horman 2013-01-31 1:50 ` Simon Horman 2013-01-31 1:50 ` [PATCH 1/4] ARM: mach-shmobile: marzen: defconfig: use regulators by default Simon Horman 2013-01-31 1:50 ` Simon Horman 2013-01-31 1:50 ` [PATCH 2/4] ARM: mach-shmobile: r8a7779: Allow initialisation of GIC by DT Simon Horman 2013-01-31 1:50 ` Simon Horman 2013-01-31 12:32 ` Mark Rutland 2013-01-31 12:32 ` Mark Rutland 2013-02-01 0:11 ` Simon Horman 2013-02-01 0:11 ` Simon Horman 2013-02-01 0:34 ` Simon Horman 2013-02-01 0:34 ` Simon Horman 2013-02-01 1:47 ` Simon Horman 2013-02-01 1:47 ` Simon Horman 2013-02-01 4:39 ` Simon Horman 2013-02-01 4:39 ` Simon Horman 2013-02-01 11:31 ` Mark Rutland 2013-02-01 11:31 ` Mark Rutland 2013-02-01 10:58 ` Mark Rutland 2013-02-01 10:58 ` Mark Rutland 2013-02-01 14:15 ` Rob Herring 2013-02-01 14:15 ` Rob Herring 2013-02-04 17:37 ` Mark Rutland 2013-02-04 17:37 ` Mark Rutland 2013-02-16 21:43 ` [PATCH 2/4] ARM: mach-shmobile: r8a7779: add SATA support Sergei Shtylyov 2013-02-16 22:43 ` Sergei Shtylyov 2013-02-18 1:23 ` Kuninori Morimoto 2013-02-18 1:23 ` Kuninori Morimoto 2013-02-18 14:07 ` Sergei Shtylyov 2013-02-18 14:07 ` Sergei Shtylyov 2013-02-18 14:21 ` Magnus Damm 2013-02-18 14:21 ` Magnus Damm 2013-02-19 0:40 ` Kuninori Morimoto 2013-02-19 0:40 ` Kuninori Morimoto 2013-02-19 1:26 ` Simon Horman 2013-02-19 1:26 ` Simon Horman 2013-02-19 14:26 ` Sergei Shtylyov 2013-02-19 14:26 ` Sergei Shtylyov 2013-02-19 1:25 ` Simon Horman 2013-02-19 1:25 ` Simon Horman 2013-01-31 1:50 ` Simon Horman [this message] 2013-01-31 1:50 ` [PATCH 3/4] ARM: mach-shmobile: r8a7779: Minimal setup using DT Simon Horman 2013-02-18 9:36 ` Magnus Damm 2013-02-18 9:36 ` Magnus Damm 2013-02-18 11:37 ` Simon Horman 2013-02-18 11:37 ` Simon Horman 2013-02-18 12:14 ` Magnus Damm 2013-02-18 12:14 ` Magnus Damm 2013-02-18 12:37 ` Simon Horman 2013-02-18 12:37 ` Simon Horman 2013-02-18 12:22 ` Magnus Damm 2013-02-18 12:22 ` Magnus Damm 2013-02-18 12:37 ` Simon Horman 2013-02-18 12:37 ` Simon Horman 2013-02-18 19:30 ` [PATCH 3/4] ARM: mach-shmobile: r8a7779: add SATA support Sergei Shtylyov 2013-02-18 20:31 ` Sergei Shtylyov 2013-01-31 1:50 ` [PATCH 4/4] ARM: mach-shmobile: marzen: Reference DT implementation Simon Horman 2013-01-31 1:50 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1359597051-32700-4-git-send-email-horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.