From: Arnd Bergmann <arnd@arndb.de> To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, arm@kernel.org, Arnd Bergmann <arnd@arndb.de>, Shawn Guo <shawn.guo@linaro.org>, Sascha Hauer <s.hauer@pengutronix.de>, Dinh Nguyen <dinguyen@altera.com>, Pavel Machek <pavel@denx.de>, Stephen Warren <swarren@nvidia.com>, Simon Horman <horms+renesas@verge.net.au> Subject: [PATCH 8/9] [HACK] ARM: imx: work around v7_cpu_resume link error Date: Thu, 14 Feb 2013 23:47:50 +0100 [thread overview] Message-ID: <1360882071-4072668-9-git-send-email-arnd@arndb.de> (raw) In-Reply-To: <1360882071-4072668-1-git-send-email-arnd@arndb.de> Patch c08e20d24 "arm: Add v7_invalidate_l1 to cache-v7.S" moves the v7_invalidate_l1 symbol out of imx/headsmp.S, which seems to cause a link error because it is now too far away from v7_cpu_resume when building an allyesconfig kernel. If we move the v7_cpu_resume function from the .data section to .text, that creates another link error for the reference to phys_l2x0_saved_regs, but we can move all of the above to .text. I believe that this is not a correct bug fix but just a bad workaround, so I'm open to ideas from people who understand the bigger picture. Without this patch, building allyesconfig results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/headsmp.S:55:(.data+0x87f8): relocation truncated to fit: R_ARM_CALL against symbol `v7_invalidate_l1' defined in .text section in arch/arm/mm/built-in.o Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/mach-imx/headsmp.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc15..0de76cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -30,7 +30,7 @@ ENDPROC(v7_secondary_startup) * allow phys_l2x0_saved_regs to be accessed with a relative load * as we are running on physical address here. */ - .data + .text .align #ifdef CONFIG_CACHE_L2X0 @@ -51,6 +51,8 @@ phys_l2x0_saved_regs: .endm #endif + .text + ENTRY(v7_cpu_resume) bl v7_invalidate_l1 pl310_resume -- 1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: arnd@arndb.de (Arnd Bergmann) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 8/9] [HACK] ARM: imx: work around v7_cpu_resume link error Date: Thu, 14 Feb 2013 23:47:50 +0100 [thread overview] Message-ID: <1360882071-4072668-9-git-send-email-arnd@arndb.de> (raw) In-Reply-To: <1360882071-4072668-1-git-send-email-arnd@arndb.de> Patch c08e20d24 "arm: Add v7_invalidate_l1 to cache-v7.S" moves the v7_invalidate_l1 symbol out of imx/headsmp.S, which seems to cause a link error because it is now too far away from v7_cpu_resume when building an allyesconfig kernel. If we move the v7_cpu_resume function from the .data section to .text, that creates another link error for the reference to phys_l2x0_saved_regs, but we can move all of the above to .text. I believe that this is not a correct bug fix but just a bad workaround, so I'm open to ideas from people who understand the bigger picture. Without this patch, building allyesconfig results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/headsmp.S:55:(.data+0x87f8): relocation truncated to fit: R_ARM_CALL against symbol `v7_invalidate_l1' defined in .text section in arch/arm/mm/built-in.o Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/mach-imx/headsmp.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc15..0de76cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -30,7 +30,7 @@ ENDPROC(v7_secondary_startup) * allow phys_l2x0_saved_regs to be accessed with a relative load * as we are running on physical address here. */ - .data + .text .align #ifdef CONFIG_CACHE_L2X0 @@ -51,6 +51,8 @@ phys_l2x0_saved_regs: .endm #endif + .text + ENTRY(v7_cpu_resume) bl v7_invalidate_l1 pl310_resume -- 1.8.1.2
next prev parent reply other threads:[~2013-02-14 22:48 UTC|newest] Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-02-14 22:47 [PATCH 0/9] arm-soc/for-next allyesconfig build regressions Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:47 ` [PATCH 1/9] ARM: arch_timer: include linux/errno.h Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-15 10:26 ` Mark Rutland 2013-02-15 10:26 ` Mark Rutland 2013-02-15 18:33 ` Arnd Bergmann 2013-02-15 18:33 ` Arnd Bergmann 2013-02-14 22:47 ` [PATCH 2/9] ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-15 17:21 ` Sascha Hauer 2013-02-15 17:21 ` Sascha Hauer 2013-02-14 22:47 ` [PATCH 3/9] ARM: omap2: include linux/errno.h in hwmod_reset Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:51 ` Tony Lindgren 2013-02-14 22:51 ` Tony Lindgren 2013-02-15 12:38 ` Arnd Bergmann 2013-02-15 12:38 ` Arnd Bergmann 2013-02-14 22:58 ` Paul Walmsley 2013-02-14 22:58 ` Paul Walmsley 2013-02-14 22:47 ` [PATCH 4/9] ARM: omap: add include guard for soc.h Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:55 ` Tony Lindgren 2013-02-14 22:55 ` Tony Lindgren 2013-02-14 23:11 ` Arnd Bergmann 2013-02-14 23:11 ` Arnd Bergmann 2013-02-15 12:40 ` Arnd Bergmann 2013-02-15 12:40 ` Arnd Bergmann 2013-02-14 22:47 ` [PATCH 5/9] drm: export drm_vm_open_locked Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:47 ` [PATCH 6/9] net: cwdavinci_cpdma: export symbols for cpsw Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:52 ` David Miller 2013-02-14 22:52 ` David Miller 2013-02-14 22:47 ` [PATCH 7/9] remoteproc: omap: depend on OMAP_MBOX_FWK Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:55 ` Tony Lindgren 2013-02-14 22:55 ` Tony Lindgren 2013-02-15 6:56 ` Ohad Ben-Cohen 2013-02-15 6:56 ` Ohad Ben-Cohen 2013-02-14 22:47 ` Arnd Bergmann [this message] 2013-02-14 22:47 ` [PATCH 8/9] [HACK] ARM: imx: work around v7_cpu_resume link error Arnd Bergmann 2013-02-14 23:45 ` Stephen Warren 2013-02-14 23:45 ` Stephen Warren 2013-02-15 11:05 ` Arnd Bergmann 2013-02-15 11:05 ` Arnd Bergmann 2013-02-15 11:13 ` Russell King - ARM Linux 2013-02-15 11:13 ` Russell King - ARM Linux 2013-02-15 15:49 ` Arnd Bergmann 2013-02-15 15:49 ` Arnd Bergmann 2013-02-15 11:07 ` Russell King - ARM Linux 2013-02-15 11:07 ` Russell King - ARM Linux 2013-02-16 5:14 ` Nicolas Pitre 2013-02-16 5:14 ` Nicolas Pitre 2013-02-18 5:55 ` Shawn Guo 2013-02-18 5:55 ` Shawn Guo 2013-02-18 17:06 ` Nicolas Pitre 2013-02-18 17:06 ` Nicolas Pitre 2013-02-19 1:42 ` Shawn Guo 2013-02-19 1:42 ` Shawn Guo 2013-02-19 4:11 ` Nicolas Pitre 2013-02-19 4:11 ` Nicolas Pitre 2013-02-19 5:10 ` Shawn Guo 2013-02-19 5:10 ` Shawn Guo 2013-02-14 22:47 ` [PATCH 9/9] [media] davinci: do not include mach/hardware.h Arnd Bergmann 2013-02-14 22:47 ` Arnd Bergmann 2013-02-14 22:57 ` Tony Lindgren 2013-02-14 22:57 ` Tony Lindgren 2013-02-15 5:06 ` Prabhakar Lad 2013-02-15 5:06 ` Prabhakar Lad
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1360882071-4072668-9-git-send-email-arnd@arndb.de \ --to=arnd@arndb.de \ --cc=arm@kernel.org \ --cc=dinguyen@altera.com \ --cc=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=pavel@denx.de \ --cc=s.hauer@pengutronix.de \ --cc=shawn.guo@linaro.org \ --cc=swarren@nvidia.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.