From: Alan Ott <alan@signal11.us> To: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>, Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>, "David S. Miller" <davem@davemloft.net> Cc: linux-zigbee-devel@lists.sourceforge.net, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Alan Ott <alan@signal11.us> Subject: [PATCH v2 0/4] 802.15.4 and 6LoWPAN Buffering Fixes Date: Wed, 3 Apr 2013 10:00:54 -0400 [thread overview] Message-ID: <1364997658-16498-1-git-send-email-alan@signal11.us> (raw) In-Reply-To: <1364928481-1813-1-git-send-email-alan@signal11.us> Version 2 of this patch series: Differences from v1: 1. Patches previously numbered 5 and 6 were squashed (to become current patch #4) at the request of Alexander Smirnov. 2. Current patch #2 had extraneous braces removed. 3. Current patch #1 was changed. It is now a patch to make mac802154 _not_ retry sending packets on failure. I believe this to be consistent with the 802.15.4 specification (Section 7.5.6.4.3 of IEEE 802.15.4-2006) Alan Ott (4): mac802154: Do not try to resend failed packets mac802154: Use netif flow control mac802154: Increase tx_buffer_len 6lowpan: handle dev_queue_xmit() error code properly net/ieee802154/6lowpan.c | 4 ++-- net/mac802154/mac802154.h | 2 -- net/mac802154/tx.c | 26 ++++++++++++++++---------- net/mac802154/wpan.c | 2 +- 4 files changed, 19 insertions(+), 15 deletions(-) -- 1.7.11.2
WARNING: multiple messages have this Message-ID (diff)
From: Alan Ott <alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org> To: Alexander Smirnov <alex.bluesman.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Dmitry Eremin-Solenikov <dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, "David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> Cc: Alan Ott <alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Subject: [PATCH v2 0/4] 802.15.4 and 6LoWPAN Buffering Fixes Date: Wed, 3 Apr 2013 10:00:54 -0400 [thread overview] Message-ID: <1364997658-16498-1-git-send-email-alan@signal11.us> (raw) In-Reply-To: <1364928481-1813-1-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org> Version 2 of this patch series: Differences from v1: 1. Patches previously numbered 5 and 6 were squashed (to become current patch #4) at the request of Alexander Smirnov. 2. Current patch #2 had extraneous braces removed. 3. Current patch #1 was changed. It is now a patch to make mac802154 _not_ retry sending packets on failure. I believe this to be consistent with the 802.15.4 specification (Section 7.5.6.4.3 of IEEE 802.15.4-2006) Alan Ott (4): mac802154: Do not try to resend failed packets mac802154: Use netif flow control mac802154: Increase tx_buffer_len 6lowpan: handle dev_queue_xmit() error code properly net/ieee802154/6lowpan.c | 4 ++-- net/mac802154/mac802154.h | 2 -- net/mac802154/tx.c | 26 ++++++++++++++++---------- net/mac802154/wpan.c | 2 +- 4 files changed, 19 insertions(+), 15 deletions(-) -- 1.7.11.2 ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html
next prev parent reply other threads:[~2013-04-03 14:01 UTC|newest] Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-04-02 18:47 [PATCH 0/6] 802.15.4 and 6LoWPAN Buffering Fixes Alan Ott 2013-04-02 18:47 ` Alan Ott 2013-04-02 18:47 ` [PATCH 1/6] mac802154: Immediately retry sending failed packets Alan Ott 2013-04-02 18:47 ` Alan Ott [not found] ` <1364928481-1813-2-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org> 2013-04-02 19:11 ` Alexander Smirnov 2013-04-02 20:28 ` Alan Ott 2013-04-02 20:28 ` Alan Ott 2013-04-02 21:28 ` Alan Ott 2013-04-02 22:35 ` Alan Ott 2013-04-02 22:35 ` Alan Ott 2013-04-02 23:13 ` [Linux-zigbee-devel] " Werner Almesberger 2013-04-02 23:13 ` Werner Almesberger 2013-04-03 1:24 ` [Linux-zigbee-devel] " Alan Ott 2013-04-03 1:24 ` Alan Ott 2013-04-03 1:56 ` [Linux-zigbee-devel] " David Miller 2013-04-03 1:59 ` Alan Ott 2013-04-03 1:59 ` Alan Ott 2013-04-03 2:03 ` [Linux-zigbee-devel] " David Miller 2013-04-03 2:03 ` David Miller 2013-04-03 2:25 ` [Linux-zigbee-devel] " Alan Ott 2013-04-03 2:25 ` Alan Ott 2013-04-03 2:30 ` [Linux-zigbee-devel] " David Miller 2013-04-03 2:30 ` David Miller 2013-04-03 2:57 ` [Linux-zigbee-devel] " Alan Ott 2013-04-03 2:38 ` Werner Almesberger 2013-04-02 18:47 ` [PATCH 2/6] mac802154: Move xmit_attemps to stack Alan Ott 2013-04-02 18:47 ` Alan Ott 2013-04-02 18:47 ` [PATCH 3/6] mac802154: Use netif flow control Alan Ott 2013-04-02 18:47 ` Alan Ott 2013-04-02 21:21 ` Sergei Shtylyov 2013-04-02 18:47 ` [PATCH 4/6] mac802154: Increase tx_buffer_len Alan Ott 2013-04-02 18:47 ` Alan Ott 2013-04-02 18:48 ` [PATCH 5/6] 6lowpan: handle dev_queue_xmit error code properly Alan Ott 2013-04-02 18:48 ` Alan Ott [not found] ` <1364928481-1813-6-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org> 2013-04-02 19:21 ` Alexander Smirnov [not found] ` <CAJmB2rB+9-gLV=SVvr4JUc2swjmTaWxD0gYM5VLw8PL1d455JA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2013-04-02 19:30 ` Alan Ott 2013-04-02 18:48 ` [PATCH 6/6] 6lowpan: return the dev_queue_xmit() return value from lowpan_xmit() Alan Ott 2013-04-02 18:48 ` Alan Ott [not found] ` <1364928481-1813-7-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org> 2013-04-02 19:27 ` Alexander Smirnov 2013-04-03 14:00 ` Alan Ott [this message] 2013-04-03 14:00 ` [PATCH v2 0/4] 802.15.4 and 6LoWPAN Buffering Fixes Alan Ott 2013-04-03 14:00 ` [PATCH v2 1/4] mac802154: Do not try to resend failed packets Alan Ott 2013-04-03 14:00 ` [PATCH v2 2/4] mac802154: Use netif flow control Alan Ott 2013-04-03 14:00 ` Alan Ott 2013-04-03 14:00 ` [PATCH v2 3/4] mac802154: Increase tx_buffer_len Alan Ott 2013-04-03 14:00 ` Alan Ott 2013-04-03 14:00 ` [PATCH v2 4/4] 6lowpan: handle dev_queue_xmit() error code properly Alan Ott 2013-04-03 14:00 ` Alan Ott 2013-04-07 21:06 ` [PATCH v2 0/4] 802.15.4 and 6LoWPAN Buffering Fixes David Miller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1364997658-16498-1-git-send-email-alan@signal11.us \ --to=alan@signal11.us \ --cc=alex.bluesman.smirnov@gmail.com \ --cc=davem@davemloft.net \ --cc=dbaryshkov@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-zigbee-devel@lists.sourceforge.net \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.