From: "Antoine Ténart" <antoine.tenart@free-electrons.com>
To: sebastian.hesselbarth@gmail.com, tj@kernel.org
Cc: zmxu@marvell.com, jszhang@marvell.com,
devicetree@vger.kernel.org,
"Antoine Ténart" <antoine.tenart@free-electrons.com>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
alexandre.belloni@free-electrons.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD
Date: Tue, 22 Apr 2014 17:38:25 +0200 [thread overview]
Message-ID: <1398181105-19714-7-git-send-email-antoine.tenart@free-electrons.com> (raw)
In-Reply-To: <1398181105-19714-1-git-send-email-antoine.tenart@free-electrons.com>
The BG2CD has an AHCI SATA controller. Add the corresponding node
in its device tree.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2cd.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..3974a5cafccf 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -169,6 +169,13 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin-ahci";
+ reg = <0xe90000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disable";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.8.3.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Antoine Ténart" <antoine.tenart@free-electrons.com>
To: sebastian.hesselbarth@gmail.com, tj@kernel.org
Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com>,
alexandre.belloni@free-electrons.com, zmxu@marvell.com,
jszhang@marvell.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD
Date: Tue, 22 Apr 2014 17:38:25 +0200 [thread overview]
Message-ID: <1398181105-19714-7-git-send-email-antoine.tenart@free-electrons.com> (raw)
In-Reply-To: <1398181105-19714-1-git-send-email-antoine.tenart@free-electrons.com>
The BG2CD has an AHCI SATA controller. Add the corresponding node
in its device tree.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2cd.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..3974a5cafccf 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -169,6 +169,13 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin-ahci";
+ reg = <0xe90000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disable";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: antoine.tenart@free-electrons.com (Antoine Ténart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD
Date: Tue, 22 Apr 2014 17:38:25 +0200 [thread overview]
Message-ID: <1398181105-19714-7-git-send-email-antoine.tenart@free-electrons.com> (raw)
In-Reply-To: <1398181105-19714-1-git-send-email-antoine.tenart@free-electrons.com>
The BG2CD has an AHCI SATA controller. Add the corresponding node
in its device tree.
Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2cd.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..3974a5cafccf 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -169,6 +169,13 @@
};
};
+ ahci: sata at e90000 {
+ compatible = "marvell,berlin-ahci";
+ reg = <0xe90000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disable";
+ };
+
apb at fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.8.3.2
next prev parent reply other threads:[~2014-04-22 15:38 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 15:38 [PATCH 0/6] ARM: berlin: add AHCI support Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 15:38 ` [PATCH 1/6] ata: ahci: add AHCI support for Berlin SoCs Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 16:54 ` Bartlomiej Zolnierkiewicz
2014-04-22 16:54 ` Bartlomiej Zolnierkiewicz
2014-04-23 8:13 ` Antoine Ténart
2014-04-23 8:13 ` Antoine Ténart
2014-04-22 17:20 ` Sebastian Hesselbarth
2014-04-22 17:20 ` Sebastian Hesselbarth
2014-04-22 17:20 ` Sebastian Hesselbarth
2014-04-23 8:21 ` Antoine Ténart
2014-04-23 8:21 ` Antoine Ténart
2014-04-22 18:47 ` Rob Herring
2014-04-22 18:47 ` Rob Herring
2014-04-22 18:47 ` Rob Herring
2014-04-22 18:54 ` Rob Herring
2014-04-22 18:54 ` Rob Herring
2014-04-22 18:54 ` Rob Herring
2014-04-23 8:24 ` Antoine Ténart
2014-04-23 8:24 ` Antoine Ténart
2014-04-23 8:24 ` Antoine Ténart
2014-04-23 8:33 ` Antoine Ténart
2014-04-23 8:33 ` Antoine Ténart
2014-04-23 8:33 ` Antoine Ténart
2014-04-22 20:56 ` Andrew Lunn
2014-04-22 20:56 ` Andrew Lunn
2014-04-24 9:50 ` Jisheng Zhang
2014-04-24 9:50 ` Jisheng Zhang
2014-04-24 9:50 ` Jisheng Zhang
2014-04-24 10:26 ` Antoine Ténart
2014-04-24 10:26 ` Antoine Ténart
2014-04-24 10:26 ` Antoine Ténart
2014-04-22 15:38 ` [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 16:27 ` Thomas Petazzoni
2014-04-22 16:27 ` Thomas Petazzoni
2014-04-22 17:21 ` Sebastian Hesselbarth
2014-04-22 17:21 ` Sebastian Hesselbarth
2014-04-22 17:21 ` Sebastian Hesselbarth
2014-04-22 15:38 ` [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 16:28 ` Thomas Petazzoni
2014-04-22 16:28 ` Thomas Petazzoni
2014-04-22 17:22 ` Sebastian Hesselbarth
2014-04-22 17:22 ` Sebastian Hesselbarth
2014-04-22 17:22 ` Sebastian Hesselbarth
2014-04-22 16:28 ` Thomas Petazzoni
2014-04-22 16:28 ` Thomas Petazzoni
2014-04-22 15:38 ` [PATCH 4/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-22 15:38 ` [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2 Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-23 2:45 ` Jisheng Zhang
2014-04-23 2:45 ` Jisheng Zhang
2014-04-23 2:45 ` Jisheng Zhang
2014-04-23 8:58 ` Antoine Ténart
2014-04-23 8:58 ` Antoine Ténart
2014-04-23 8:58 ` Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart [this message]
2014-04-22 15:38 ` [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD Antoine Ténart
2014-04-22 15:38 ` Antoine Ténart
2014-04-23 2:43 ` Jisheng Zhang
2014-04-23 2:43 ` Jisheng Zhang
2014-04-23 2:43 ` Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398181105-19714-7-git-send-email-antoine.tenart@free-electrons.com \
--to=antoine.tenart@free-electrons.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tj@kernel.org \
--cc=zmxu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.