All of lore.kernel.org
 help / color / mirror / Atom feed
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Soren Brinkmann <soren.brinkmann@xilinx.com>
Subject: [PATCH 1/3] ARM: zynq: DT: Fix Ethernet phy modes
Date: Wed, 20 Aug 2014 08:56:57 -0700	[thread overview]
Message-ID: <1408550219-19825-1-git-send-email-soren.brinkmann@xilinx.com> (raw)

The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'.
For the Zed board this seems to make a difference between working and
broken Ethernet.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/boot/dts/zynq-zc702.dts | 2 +-
 arch/arm/boot/dts/zynq-zc706.dts | 2 +-
 arch/arm/boot/dts/zynq-zed.dts   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 835c3089c61c..30bcfe20f0bc 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -35,7 +35,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 4cc9913078cd..3d9cb023e158 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 82d7ef1a9a9c..42deb1b7dbc8 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &sdhci0 {
-- 
2.0.1.1.gfbfc394


WARNING: multiple messages have this Message-ID (diff)
From: soren.brinkmann@xilinx.com (Soren Brinkmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: zynq: DT: Fix Ethernet phy modes
Date: Wed, 20 Aug 2014 08:56:57 -0700	[thread overview]
Message-ID: <1408550219-19825-1-git-send-email-soren.brinkmann@xilinx.com> (raw)

The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'.
For the Zed board this seems to make a difference between working and
broken Ethernet.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/boot/dts/zynq-zc702.dts | 2 +-
 arch/arm/boot/dts/zynq-zc706.dts | 2 +-
 arch/arm/boot/dts/zynq-zed.dts   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 835c3089c61c..30bcfe20f0bc 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -35,7 +35,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 4cc9913078cd..3d9cb023e158 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 82d7ef1a9a9c..42deb1b7dbc8 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &sdhci0 {
-- 
2.0.1.1.gfbfc394

             reply	other threads:[~2014-08-20 15:57 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-20 15:56 Soren Brinkmann [this message]
2014-08-20 15:56 ` [PATCH 1/3] ARM: zynq: DT: Fix Ethernet phy modes Soren Brinkmann
2014-08-20 15:56 ` [PATCH 2/3] ARM: zynq: DT: Move size/address properties to dtsi Soren Brinkmann
2014-08-20 15:56   ` Soren Brinkmann
2014-08-20 16:00   ` Andreas Färber
2014-08-20 16:00     ` Andreas Färber
2014-08-21  8:42     ` Michal Simek
2014-08-21  8:42       ` Michal Simek
2014-08-21  8:42       ` Michal Simek
2014-08-20 15:56 ` [PATCH 3/3] ARM: zynq: DT: Add Ethernet phys Soren Brinkmann
2014-08-20 15:56   ` Soren Brinkmann
2014-08-21  8:41   ` Michal Simek
2014-08-21  8:41     ` Michal Simek
2014-08-21  8:41     ` Michal Simek
2014-08-21 11:32     ` Andreas Färber
2014-08-21 11:32       ` Andreas Färber
2014-08-21 15:49       ` Sören Brinkmann
2014-08-21 15:49         ` Sören Brinkmann
2014-08-21 15:49         ` Sören Brinkmann
2014-08-22 16:20         ` Jason Gunthorpe
2014-08-22 16:20           ` Jason Gunthorpe
2014-08-22 16:20           ` Jason Gunthorpe
2014-08-22 16:31           ` Sören Brinkmann
2014-08-22 16:31             ` Sören Brinkmann
2014-08-22 16:48             ` Jason Gunthorpe
2014-08-22 16:48               ` Jason Gunthorpe
2014-08-22 16:48               ` Jason Gunthorpe
2014-08-22 20:47         ` Florian Fainelli
2014-08-22 20:47           ` Florian Fainelli
2014-08-22 20:47           ` Florian Fainelli
2014-08-25 17:46           ` Jason Gunthorpe
2014-08-25 17:46             ` Jason Gunthorpe
2014-08-25 17:46             ` Jason Gunthorpe
2014-08-25 20:21             ` Florian Fainelli
2014-08-25 20:21               ` Florian Fainelli
2014-08-25 20:21               ` Florian Fainelli
2014-08-29 14:08               ` Michal Simek
2014-08-29 14:08                 ` Michal Simek
2014-08-29 14:08                 ` Michal Simek
2014-08-29 15:18                 ` Andreas Färber
2014-08-29 15:18                   ` Andreas Färber
2014-08-29 15:35                   ` Sören Brinkmann
2014-08-29 15:35                     ` Sören Brinkmann
2014-08-29 15:35                     ` Sören Brinkmann
2014-08-29 15:46                     ` Andreas Färber
2014-08-29 15:46                       ` Andreas Färber
2014-08-29 15:46                       ` Andreas Färber
2014-08-29 17:31                     ` Jason Gunthorpe
2014-08-29 17:31                       ` Jason Gunthorpe
2014-08-29 17:31                       ` Jason Gunthorpe
2014-08-29 18:23                       ` Florian Fainelli
2014-08-29 18:23                         ` Florian Fainelli
2014-08-29 18:23                         ` Florian Fainelli
2014-08-29 23:22                         ` Jason Gunthorpe
2014-08-29 23:22                           ` Jason Gunthorpe
2014-08-30  0:43                           ` Florian Fainelli
2014-08-30  0:43                             ` Florian Fainelli
2014-08-30  0:43                             ` Florian Fainelli
2014-09-01 11:26                             ` Michal Simek
2014-09-01 11:26                               ` Michal Simek
2014-09-01 11:26                               ` Michal Simek
2014-08-22 20:42     ` Florian Fainelli
2014-08-21  8:42 ` [PATCH 1/3] ARM: zynq: DT: Fix Ethernet phy modes Michal Simek
2014-08-21  8:42   ` Michal Simek
2014-08-21  8:42   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1408550219-19825-1-git-send-email-soren.brinkmann@xilinx.com \
    --to=soren.brinkmann@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.