All of lore.kernel.org
 help / color / mirror / Atom feed
From: Weike Chen <alvin.chen@intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	atull <atull@opensource.altera.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Boon Leong Ong <boon.leong.ong@intel.com>,
	Hock Leong Kweh <hock.leong.kweh@intel.com>,
	Darren Hart <dvhart@linux.intel.com>,
	Sebastian Andrzej Siewior <sebastian@breakpoint.cc>,
	Mika Westerberg <mika.westerberg@intel.com>,
	Andriy Shevchenko <andriy.shevchenko@intel.com>,
	Alvin Chen <alvin.chen@intel.com>, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 4/4 v3] GPIO: gpio-dwapb: Suspend & Resume PM enabling
Date: Tue,  9 Sep 2014 11:08:01 -0700	[thread overview]
Message-ID: <1410286081-16653-5-git-send-email-alvin.chen@intel.com> (raw)
In-Reply-To: <1410286081-16653-1-git-send-email-alvin.chen@intel.com>

This patch enables suspend and resume mode for the power management, and
it is based on Josef Ahmad's previous work.

Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
---
 drivers/gpio/gpio-dwapb.c |  109 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index a90afb9..9da2ba7 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -50,11 +50,14 @@
 #define GPIO_SWPORT_DDR_SIZE	(GPIO_SWPORTB_DDR - GPIO_SWPORTA_DDR)
 
 struct dwapb_gpio;
+struct dwapb_context;
 
 struct dwapb_gpio_port {
 	struct bgpio_chip	bgc;
 	bool			is_registered;
 	struct dwapb_gpio	*gpio;
+	struct dwapb_context	*ctx;
+	unsigned int		idx;
 };
 
 struct dwapb_gpio {
@@ -377,6 +380,7 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
 
 	port = &gpio->ports[offs];
 	port->gpio = gpio;
+	port->idx = pp->idx;
 
 	dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_SIZE);
 	set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_SIZE);
@@ -584,10 +588,115 @@ static const struct of_device_id dwapb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwapb_of_match);
 
+#ifdef CONFIG_PM_SLEEP
+/* Store GPIO context across system-wide suspend/resume transitions */
+struct dwapb_context {
+	u32 data;
+	u32 dir;
+	u32 ext;
+	u32 int_en;
+	u32 int_mask;
+	u32 int_type;
+	u32 int_pol;
+	u32 int_deb;
+};
+
+static int dwapb_gpio_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dwapb_gpio *gpio = platform_get_drvdata(pdev);
+	struct bgpio_chip *bgc	= &gpio->ports[0].bgc;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&bgc->lock, flags);
+	for (i = 0; i < gpio->nr_ports; i++) {
+		unsigned int offset;
+		unsigned int idx = gpio->ports[i].idx;
+		struct dwapb_context *ctx = gpio->ports[i].ctx;
+
+		if (!ctx) {
+			ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+			gpio->ports[i].ctx = ctx;
+		}
+
+		offset = GPIO_SWPORTA_DDR + (idx * GPIO_SWPORT_DDR_SIZE);
+		ctx->dir = dwapb_read(gpio, offset);
+
+		offset = GPIO_SWPORTA_DR + (idx * GPIO_SWPORT_DR_SIZE);
+		ctx->data = dwapb_read(gpio, offset);
+
+		offset = GPIO_EXT_PORTA + (idx * GPIO_EXT_PORT_SIZE);
+		ctx->ext = dwapb_read(gpio, offset);
+
+		/* Only port A can provide interrupts */
+		if (idx == 0) {
+			ctx->int_mask	= dwapb_read(gpio, GPIO_INTMASK);
+			ctx->int_en	= dwapb_read(gpio, GPIO_INTEN);
+			ctx->int_pol	= dwapb_read(gpio, GPIO_INT_POLARITY);
+			ctx->int_type	= dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
+			ctx->int_deb	= dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
+
+			/* Mask out interrupts */
+			dwapb_write(gpio, GPIO_INTMASK, 0xffffffff);
+		}
+	}
+	spin_unlock_irqrestore(&bgc->lock, flags);
+
+	return 0;
+}
+
+static int dwapb_gpio_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dwapb_gpio *gpio = platform_get_drvdata(pdev);
+	struct bgpio_chip *bgc	= &gpio->ports[0].bgc;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&bgc->lock, flags);
+	for (i = 0; i < gpio->nr_ports; i++) {
+		unsigned int offset;
+		unsigned int idx = gpio->ports[i].idx;
+		struct dwapb_context *ctx = gpio->ports[i].ctx;
+
+		BUG_ON(ctx == 0);
+
+		offset = GPIO_SWPORTA_DR + (idx * GPIO_SWPORT_DR_SIZE);
+		dwapb_write(gpio, offset, ctx->data);
+
+		offset = GPIO_SWPORTA_DDR + (idx * GPIO_SWPORT_DDR_SIZE);
+		dwapb_write(gpio, offset, ctx->dir);
+
+		offset = GPIO_EXT_PORTA + (idx * GPIO_EXT_PORT_SIZE);
+		dwapb_write(gpio, offset, ctx->ext);
+
+		/* Only port A can provide interrupts */
+		if (idx == 0) {
+			dwapb_write(gpio, GPIO_INTTYPE_LEVEL, ctx->int_type);
+			dwapb_write(gpio, GPIO_INT_POLARITY, ctx->int_pol);
+			dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ctx->int_deb);
+			dwapb_write(gpio, GPIO_INTEN, ctx->int_en);
+			dwapb_write(gpio, GPIO_INTMASK, ctx->int_mask);
+
+			/* Clear out spurious interrupts */
+			dwapb_write(gpio, GPIO_PORTA_EOI, 0xffffffff);
+		}
+	}
+	spin_unlock_irqrestore(&bgc->lock, flags);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
+			 dwapb_gpio_resume);
+
 static struct platform_driver dwapb_gpio_driver = {
 	.driver		= {
 		.name	= "gpio-dwapb",
 		.owner	= THIS_MODULE,
+		.pm	= &dwapb_gpio_pm_ops,
 		.of_match_table = of_match_ptr(dwapb_of_match),
 	},
 	.probe		= dwapb_gpio_probe,
-- 
1.7.9.5

  parent reply	other threads:[~2014-09-09 18:08 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-09 18:07 [PATCH 0/4 v3] The Designware GPIO Supporting Weike Chen
2014-09-09 18:07 ` Weike Chen
2014-09-09 18:07 ` [PATCH 1/4 v3] GPIO: gpio-dwapb: Enable platform driver binding to MFD driver Weike Chen
2014-09-09 17:05   ` Darren Hart
2014-09-09 17:05     ` Darren Hart
2014-09-10  0:34     ` Chen, Alvin
2014-09-10  0:34       ` Chen, Alvin
2014-09-10  3:26       ` Darren Hart
2014-09-10 10:32         ` Chen, Alvin
2014-09-10 10:32           ` Chen, Alvin
2014-09-10 19:11   ` atull
2014-09-10 19:11     ` atull
2014-09-11  0:32     ` Chen, Alvin
2014-09-11  0:46     ` Chen, Alvin
2014-09-11 15:40       ` atull
2014-09-11  7:59     ` Shevchenko, Andriy
2014-09-11  7:59       ` Shevchenko, Andriy
     [not found]       ` <1410422381.7023.15.camel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-09-11 15:26         ` atull
2014-09-11 15:26           ` atull
2014-09-15  1:18           ` Chen, Alvin
2014-09-15  1:18             ` Chen, Alvin
2014-09-16  1:07             ` Chen, Alvin
2014-09-16  1:07               ` Chen, Alvin
2014-09-09 18:07 ` [PATCH 2/4 v3] GPIO: gpio-dwapb: Change readl&writel to dwapb_read&dwapb_write Weike Chen
2014-09-09 18:08 ` [PATCH 3/4 v3] GPIO: gpio-dwapb: Support Debounce Weike Chen
2014-09-09 18:08 ` Weike Chen [this message]
2014-09-11 16:40   ` [PATCH 4/4 v3] GPIO: gpio-dwapb: Suspend & Resume PM enabling atull
2014-09-11 16:40     ` atull
2014-09-12  2:27     ` Chen, Alvin
2014-09-12 15:46       ` atull

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410286081-16653-5-git-send-email-alvin.chen@intel.com \
    --to=alvin.chen@intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=arnd@arndb.de \
    --cc=atull@opensource.altera.com \
    --cc=boon.leong.ong@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dvhart@linux.intel.com \
    --cc=gnurou@gmail.com \
    --cc=grant.likely@linaro.org \
    --cc=hock.leong.kweh@intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian@breakpoint.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.