From: Laurentiu Palcu <laurentiu.palcu@intel.com> To: Mark Brown <broonie@kernel.org>, Samuel Ortiz <sameo@linux.intel.com>, Lee Jones <lee.jones@linaro.org>, Johan Havold <johan@kernel.org> Cc: Octavian Purdila <octavian.purdila@intel.com>, linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, Laurentiu Palcu <laurentiu.palcu@intel.com> Subject: [PATCH v3 0/2] Add SPI support for Diolan DLN2 Date: Tue, 18 Nov 2014 14:09:57 +0200 [thread overview] Message-ID: <1416312599-5176-1-git-send-email-laurentiu.palcu@intel.com> (raw) Short note: I couldn't see the 2nd patch applied in any mfd tree, so I included it again. Changes in v3: * fixed some coding style problems; * do not use dln2->buf for small commands, use the stack; * removed a bunch of __packed attributes that were not really needed; * change the copy from/to buffer routines to use put/get_unaligned macros to avoid potential buffer alignment issues; Changes in v2: * fixed an indentation issue; * removed redundant call to spi_master_put() in _remove(); Hi, This patchset adds support for the SPI module of the Diolan DLN2 USB to I2C/SPI/GPIO bridge [1]. This patch depends on another patchset, [1], not yet merged, which adds support for the other two modules: I2C and GPIO. [1] http://www.diolan.com/products/dln2/features.html [2] http://marc.info/?l=linux-kernel&m=141528172903850&w=2 laurentiu Laurentiu Palcu (2): spi: add support for DLN-2 USB-SPI adapter mfd: dln2: add support for USB-SPI module drivers/mfd/dln2.c | 12 + drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-dln2.c | 818 +++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 841 insertions(+) create mode 100644 drivers/spi/spi-dln2.c -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Laurentiu Palcu <laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Johan Havold <johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Cc: Octavian Purdila <octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Laurentiu Palcu <laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> Subject: [PATCH v3 0/2] Add SPI support for Diolan DLN2 Date: Tue, 18 Nov 2014 14:09:57 +0200 [thread overview] Message-ID: <1416312599-5176-1-git-send-email-laurentiu.palcu@intel.com> (raw) Short note: I couldn't see the 2nd patch applied in any mfd tree, so I included it again. Changes in v3: * fixed some coding style problems; * do not use dln2->buf for small commands, use the stack; * removed a bunch of __packed attributes that were not really needed; * change the copy from/to buffer routines to use put/get_unaligned macros to avoid potential buffer alignment issues; Changes in v2: * fixed an indentation issue; * removed redundant call to spi_master_put() in _remove(); Hi, This patchset adds support for the SPI module of the Diolan DLN2 USB to I2C/SPI/GPIO bridge [1]. This patch depends on another patchset, [1], not yet merged, which adds support for the other two modules: I2C and GPIO. [1] http://www.diolan.com/products/dln2/features.html [2] http://marc.info/?l=linux-kernel&m=141528172903850&w=2 laurentiu Laurentiu Palcu (2): spi: add support for DLN-2 USB-SPI adapter mfd: dln2: add support for USB-SPI module drivers/mfd/dln2.c | 12 + drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-dln2.c | 818 +++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 841 insertions(+) create mode 100644 drivers/spi/spi-dln2.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-11-18 12:10 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-11-18 12:09 Laurentiu Palcu [this message] 2014-11-18 12:09 ` [PATCH v3 0/2] Add SPI support for Diolan DLN2 Laurentiu Palcu 2014-11-18 12:09 ` [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter Laurentiu Palcu 2014-11-18 17:06 ` Johan Hovold 2014-11-18 17:06 ` Johan Hovold 2014-11-19 9:53 ` Laurentiu Palcu 2014-11-19 10:09 ` Johan Hovold 2014-11-19 10:09 ` Johan Hovold 2014-11-19 10:47 ` [PATCH v4 " Laurentiu Palcu 2014-11-19 10:47 ` Laurentiu Palcu 2014-11-19 12:21 ` Johan Hovold 2014-11-19 12:21 ` Johan Hovold 2014-11-19 13:07 ` [PATCH v5 " Laurentiu Palcu 2014-11-19 13:07 ` Laurentiu Palcu 2014-11-19 13:51 ` Johan Hovold 2014-11-19 13:51 ` Johan Hovold 2014-11-19 14:12 ` Laurentiu Palcu 2014-11-19 14:12 ` Laurentiu Palcu 2014-11-26 10:09 ` [PATCH v6 " Laurentiu Palcu 2014-11-26 18:25 ` Mark Brown 2014-11-26 18:25 ` Mark Brown 2014-11-27 10:30 ` Laurentiu Palcu 2014-11-27 10:30 ` Laurentiu Palcu 2014-11-28 13:09 ` [PATCH v7 " Laurentiu Palcu 2014-11-28 14:10 ` Mark Brown 2014-11-28 14:57 ` Laurentiu Palcu 2014-11-28 14:57 ` Laurentiu Palcu 2014-11-28 15:14 ` Mark Brown 2014-11-28 15:14 ` Mark Brown 2014-11-28 15:31 ` Laurentiu Palcu 2014-11-28 15:31 ` Laurentiu Palcu 2014-11-28 16:01 ` Mark Brown 2014-11-28 18:13 ` Laurentiu Palcu 2014-11-28 18:13 ` Laurentiu Palcu 2014-11-28 18:35 ` Mark Brown 2014-11-28 18:35 ` Mark Brown 2014-11-28 19:27 ` Laurentiu Palcu 2014-11-28 19:27 ` Laurentiu Palcu 2014-11-28 19:46 ` Mark Brown 2014-11-28 19:46 ` Mark Brown 2014-11-28 19:21 ` Octavian Purdila 2014-11-28 19:21 ` Octavian Purdila 2014-12-05 18:34 ` Mark Brown 2014-12-05 18:34 ` Mark Brown 2014-11-18 12:09 ` [PATCH v3 2/2] mfd: dln2: add support for USB-SPI module Laurentiu Palcu 2014-11-18 12:09 ` Laurentiu Palcu 2014-11-19 16:29 ` Lee Jones 2014-11-19 16:29 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1416312599-5176-1-git-send-email-laurentiu.palcu@intel.com \ --to=laurentiu.palcu@intel.com \ --cc=broonie@kernel.org \ --cc=johan@kernel.org \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=octavian.purdila@intel.com \ --cc=sameo@linux.intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.