All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Laurentiu Palcu <laurentiu.palcu@intel.com>
Cc: Mark Brown <broonie@kernel.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>, Johan Havold <johan@kernel.org>,
	Octavian Purdila <octavian.purdila@intel.com>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter
Date: Tue, 18 Nov 2014 18:06:27 +0100	[thread overview]
Message-ID: <20141118170627.GB22786@localhost> (raw)
In-Reply-To: <1416312599-5176-2-git-send-email-laurentiu.palcu@intel.com>

On Tue, Nov 18, 2014 at 02:09:58PM +0200, Laurentiu Palcu wrote:

> +/*
> + * Copy the data to DLN2 buffer and change the byte order to LE, requested by
> + * DLN2 module. SPI core makes sure that the data length is a multiple of word
> + * size.
> + */
> +static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> +	memcpy(dln2_buf, src, len);
> +#else
> +	if (bpw <= 8) {
> +		memcpy(dln2_buf, src, len);
> +	} else if (bpw <= 16) {
> +		__le16 *d = (__le16 *)dln2_buf;
> +		u16 *s = (u16 *)src;
> +
> +		len = len / 2;
> +		while (len--)
> +			put_unaligned_le16(get_unaligned(s++), d++);

You said the dln2 buffer was properly aligned, right? Then you don't
need to use put_unaligned_lexx here...

> +	} else {
> +		__le32 *d = (__le32 *)dln2_buf;
> +		u32 *s = (u32 *)src;
> +
> +		len = len / 4;
> +		while (len--)
> +			put_unaligned_le32(get_unaligned(s++), d++);
> +	}
> +#endif
> +
> +	return 0;
> +}
> +
> +/*
> + * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
> + * buffer is LE ordered. SPI core makes sure that the data length is a multiple
> + * of word size.
> + */
> +static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> +	memcpy(dest, dln2_buf, len);
> +#else
> +	if (bpw <= 8) {
> +		memcpy(dest, dln2_buf, len);
> +	} else if (bpw <= 16) {
> +		u16 *d = (u16 *)dest;
> +		__le16 *s = (__le16 *)dln2_buf;
> +
> +		len = len / 2;
> +		while (len--)
> +			put_unaligned(get_unaligned_le16(s++), d++)

...or get_unaligned_lexx here.

> +	} else {
> +		u32 *d = (u32 *)dest;
> +		__le32 *s = (__le32 *)dln2_buf;
> +
> +		len = len / 4;
> +		while (len--)
> +			put_unaligned(get_unaligned_le32(s++), d++)
> +	}
> +#endif
> +
> +	return 0;
> +}

Did you check the alignment of the SPI buffers as well? I'd assume they
were DMA-able and thus properly aligned, and then you do not need to use
any unaligned helpers above at all.

Johan

WARNING: multiple messages have this Message-ID (diff)
From: Johan Hovold <johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Laurentiu Palcu
	<laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Johan Havold <johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Octavian Purdila
	<octavian.purdila-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter
Date: Tue, 18 Nov 2014 18:06:27 +0100	[thread overview]
Message-ID: <20141118170627.GB22786@localhost> (raw)
In-Reply-To: <1416312599-5176-2-git-send-email-laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

On Tue, Nov 18, 2014 at 02:09:58PM +0200, Laurentiu Palcu wrote:

> +/*
> + * Copy the data to DLN2 buffer and change the byte order to LE, requested by
> + * DLN2 module. SPI core makes sure that the data length is a multiple of word
> + * size.
> + */
> +static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> +	memcpy(dln2_buf, src, len);
> +#else
> +	if (bpw <= 8) {
> +		memcpy(dln2_buf, src, len);
> +	} else if (bpw <= 16) {
> +		__le16 *d = (__le16 *)dln2_buf;
> +		u16 *s = (u16 *)src;
> +
> +		len = len / 2;
> +		while (len--)
> +			put_unaligned_le16(get_unaligned(s++), d++);

You said the dln2 buffer was properly aligned, right? Then you don't
need to use put_unaligned_lexx here...

> +	} else {
> +		__le32 *d = (__le32 *)dln2_buf;
> +		u32 *s = (u32 *)src;
> +
> +		len = len / 4;
> +		while (len--)
> +			put_unaligned_le32(get_unaligned(s++), d++);
> +	}
> +#endif
> +
> +	return 0;
> +}
> +
> +/*
> + * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
> + * buffer is LE ordered. SPI core makes sure that the data length is a multiple
> + * of word size.
> + */
> +static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> +	memcpy(dest, dln2_buf, len);
> +#else
> +	if (bpw <= 8) {
> +		memcpy(dest, dln2_buf, len);
> +	} else if (bpw <= 16) {
> +		u16 *d = (u16 *)dest;
> +		__le16 *s = (__le16 *)dln2_buf;
> +
> +		len = len / 2;
> +		while (len--)
> +			put_unaligned(get_unaligned_le16(s++), d++)

...or get_unaligned_lexx here.

> +	} else {
> +		u32 *d = (u32 *)dest;
> +		__le32 *s = (__le32 *)dln2_buf;
> +
> +		len = len / 4;
> +		while (len--)
> +			put_unaligned(get_unaligned_le32(s++), d++)
> +	}
> +#endif
> +
> +	return 0;
> +}

Did you check the alignment of the SPI buffers as well? I'd assume they
were DMA-able and thus properly aligned, and then you do not need to use
any unaligned helpers above at all.

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-11-18 17:06 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-18 12:09 [PATCH v3 0/2] Add SPI support for Diolan DLN2 Laurentiu Palcu
2014-11-18 12:09 ` Laurentiu Palcu
2014-11-18 12:09 ` [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter Laurentiu Palcu
2014-11-18 17:06   ` Johan Hovold [this message]
2014-11-18 17:06     ` Johan Hovold
2014-11-19  9:53     ` Laurentiu Palcu
2014-11-19 10:09       ` Johan Hovold
2014-11-19 10:09         ` Johan Hovold
2014-11-19 10:47   ` [PATCH v4 " Laurentiu Palcu
2014-11-19 10:47     ` Laurentiu Palcu
2014-11-19 12:21     ` Johan Hovold
2014-11-19 12:21       ` Johan Hovold
2014-11-19 13:07     ` [PATCH v5 " Laurentiu Palcu
2014-11-19 13:07       ` Laurentiu Palcu
2014-11-19 13:51       ` Johan Hovold
2014-11-19 13:51         ` Johan Hovold
2014-11-19 14:12         ` Laurentiu Palcu
2014-11-19 14:12           ` Laurentiu Palcu
2014-11-26 10:09   ` [PATCH v6 " Laurentiu Palcu
2014-11-26 18:25     ` Mark Brown
2014-11-26 18:25       ` Mark Brown
2014-11-27 10:30       ` Laurentiu Palcu
2014-11-27 10:30         ` Laurentiu Palcu
2014-11-28 13:09   ` [PATCH v7 " Laurentiu Palcu
2014-11-28 14:10     ` Mark Brown
2014-11-28 14:57       ` Laurentiu Palcu
2014-11-28 14:57         ` Laurentiu Palcu
2014-11-28 15:14         ` Mark Brown
2014-11-28 15:14           ` Mark Brown
2014-11-28 15:31           ` Laurentiu Palcu
2014-11-28 15:31             ` Laurentiu Palcu
2014-11-28 16:01             ` Mark Brown
2014-11-28 18:13               ` Laurentiu Palcu
2014-11-28 18:13                 ` Laurentiu Palcu
2014-11-28 18:35                 ` Mark Brown
2014-11-28 18:35                   ` Mark Brown
2014-11-28 19:27                   ` Laurentiu Palcu
2014-11-28 19:27                     ` Laurentiu Palcu
2014-11-28 19:46                     ` Mark Brown
2014-11-28 19:46                       ` Mark Brown
2014-11-28 19:21                 ` Octavian Purdila
2014-11-28 19:21                   ` Octavian Purdila
2014-12-05 18:34     ` Mark Brown
2014-12-05 18:34       ` Mark Brown
2014-11-18 12:09 ` [PATCH v3 2/2] mfd: dln2: add support for USB-SPI module Laurentiu Palcu
2014-11-18 12:09   ` Laurentiu Palcu
2014-11-19 16:29   ` Lee Jones
2014-11-19 16:29     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141118170627.GB22786@localhost \
    --to=johan@kernel.org \
    --cc=broonie@kernel.org \
    --cc=laurentiu.palcu@intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=octavian.purdila@intel.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.