[PATCH v2 07/10] KVM: arm64: guest debug, add support for single-step

["Alex Bennée" <alex.bennee@linaro.org>]

This adds support for single-stepping the guest. As userspace can and
will manipulate guest registers before restarting any tweaking of the
registers has to occur just before control is passed back to the guest.
Furthermore while guest debugging is in effect we need to squash the
ability of the guest to single-step itself as we have no easy way of
re-entering the guest after the exception has been delivered to the
hypervisor.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - Move pstate/mdscr manipulation into C
  - don't export guest_debug to assembly
  - add accessor for saved_debug regs
  - tweak save/restore of mdscr_el1

diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index d3bc8dc..c1ed8cb 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -304,7 +304,21 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	kvm_arm_set_running_vcpu(NULL);
 }
 
-#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE|KVM_GUESTDBG_USE_SW_BP)
+#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE |    \
+			    KVM_GUESTDBG_USE_SW_BP | \
+			    KVM_GUESTDBG_SINGLESTEP)
+
+/**
+ * kvm_arch_vcpu_ioctl_set_guest_debug - Setup guest debugging
+ * @kvm:	pointer to the KVM struct
+ * @kvm_guest_debug: the ioctl data buffer
+ *
+ * This sets up the VM for guest debugging. Care has to be taken when
+ * manipulating guest registers as these will be set/cleared by the
+ * hyper-visor controller, typically before each kvm_run event. As a
+ * result modification of the guest registers needs to take place
+ * after they have been restored in the hyp.S trampoline code.
+ */
 
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 0631840..6a33647 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -121,6 +121,13 @@ struct kvm_vcpu_arch {
 	 * here.
 	 */
 
+	/* Registers pre any guest debug manipulations */
+	struct {
+		u32	pstate_ss_bit;
+		u32	mdscr_el1_bits;
+
+	} debug_saved_regs;
+
 	/* Don't run the guest */
 	bool pause;
 
@@ -143,6 +150,7 @@ struct kvm_vcpu_arch {
 
 #define vcpu_gp_regs(v)		(&(v)->arch.ctxt.gp_regs)
 #define vcpu_sys_reg(v,r)	((v)->arch.ctxt.sys_regs[(r)])
+#define vcpu_debug_saved_reg(v, r) ((v)->arch.debug_saved_regs.r)
 /*
  * CP14 and CP15 live in the same array, as they are backed by the
  * same system registers.
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index cff0475..b32362c 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -19,8 +19,16 @@
 
 #include <linux/kvm_host.h>
 
+#include <asm/debug-monitors.h>
+#include <asm/kvm_asm.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_host.h>
+#include <asm/kvm_emulate.h>
+
+/* These are the bits of MDSCR_EL1 we may mess with */
+#define MDSCR_EL1_DEBUG_BITS	(DBG_MDSCR_SS | \
+				DBG_MDSCR_KDE | \
+				DBG_MDSCR_MDE)
 
 /**
  * kvm_arch_setup_debug - set-up debug related stuff
@@ -51,15 +59,46 @@ void kvm_arch_setup_debug(struct kvm_vcpu *vcpu)
 	else
 		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
 
-	/* Trap breakpoints? */
-	if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+	/* Is Guest debugging in effect? */
+	if (vcpu->guest_debug) {
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
-	else
-		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
 
+		/* Save pstate/mdscr */
+		vcpu_debug_saved_reg(vcpu, pstate_ss_bit) =
+			*vcpu_cpsr(vcpu) & DBG_SPSR_SS;
+		vcpu_debug_saved_reg(vcpu, mdscr_el1_bits) =
+			vcpu_sys_reg(vcpu, MDSCR_EL1) & MDSCR_EL1_DEBUG_BITS;
+		/*
+		 * Single Step (ARM ARM D2.12.3 The software step state
+		 * machine)
+		 *
+		 * If we are doing Single Step we need to manipulate
+		 * MDSCR_EL1.SS and PSTATE.SS. If not we need to
+		 * suppress the guest from messing with it.
+		 */
+		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+			*vcpu_cpsr(vcpu) |=  DBG_SPSR_SS;
+			vcpu_sys_reg(vcpu, MDSCR_EL1) |= DBG_MDSCR_SS;
+		} else {
+			*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+			vcpu_sys_reg(vcpu, MDSCR_EL1) &= ~DBG_MDSCR_SS;
+		}
+
+	} else {
+		/* Debug operations can go straight to the guest */
+		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
+	}
 }
 
 void kvm_arch_clear_debug(struct kvm_vcpu *vcpu)
 {
-	/* Nothing to do yet */
+	if (vcpu->guest_debug) {
+		/* Restore pstate/mdscr bits we may have messed with */
+		*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+		*vcpu_cpsr(vcpu) |= vcpu_debug_saved_reg(vcpu, pstate_ss_bit);
+
+		vcpu_sys_reg(vcpu, MDSCR_EL1) &= ~MDSCR_EL1_DEBUG_BITS;
+		vcpu_sys_reg(vcpu, MDSCR_EL1) |=
+			vcpu_debug_saved_reg(vcpu, mdscr_el1_bits);
+	}
 }
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index ed1bbb4..16accae 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -101,6 +101,7 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	run->debug.arch.hsr = hsr;
 
 	switch (hsr >> ESR_ELx_EC_SHIFT) {
+	case ESR_ELx_EC_SOFTSTP_LOW:
 	case ESR_ELx_EC_BKPT32:
 	case ESR_ELx_EC_BRK64:
 		run->debug.arch.pc = *vcpu_pc(vcpu);
@@ -127,6 +128,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_SYS64]	= kvm_handle_sys_reg,
 	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
 	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
 	[ESR_ELx_EC_BKPT32]	= kvm_handle_guest_debug,
 	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
 };
-- 
2.3.4