All of lore.kernel.org
 help / color / mirror / Atom feed
From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
	ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC 09/12] ath10k: Mailbox address definitions
Date: Mon, 14 Nov 2016 17:33:39 +0100	[thread overview]
Message-ID: <1479141222-8493-10-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1479141222-8493-1-git-send-email-erik.stromdahl@gmail.com>

Address definitions for SDIO/mbox based chipsets.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/hw.h |   53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 883547f..46142e9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -814,6 +814,59 @@ struct ath10k_hw_ops {
 #define QCA9887_EEPROM_ADDR_LO_MASK		0x00ff0000
 #define QCA9887_EEPROM_ADDR_LO_LSB		16
 
+#define MBOX_RESET_CONTROL_ADDRESS		0x00000000
+#define MBOX_HOST_INT_STATUS_ADDRESS		0x00000800
+#define MBOX_HOST_INT_STATUS_ERROR_LSB		7
+#define MBOX_HOST_INT_STATUS_ERROR_MASK		0x00000080
+#define MBOX_HOST_INT_STATUS_CPU_LSB		6
+#define MBOX_HOST_INT_STATUS_CPU_MASK		0x00000040
+#define MBOX_HOST_INT_STATUS_COUNTER_LSB	4
+#define MBOX_HOST_INT_STATUS_COUNTER_MASK	0x00000010
+#define MBOX_CPU_INT_STATUS_ADDRESS		0x00000801
+#define MBOX_ERROR_INT_STATUS_ADDRESS		0x00000802
+#define MBOX_ERROR_INT_STATUS_WAKEUP_LSB	2
+#define MBOX_ERROR_INT_STATUS_WAKEUP_MASK	0x00000004
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_LSB	1
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK	0x00000002
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_LSB	0
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK	0x00000001
+#define MBOX_COUNTER_INT_STATUS_ADDRESS		0x00000803
+#define MBOX_COUNTER_INT_STATUS_COUNTER_LSB	0
+#define MBOX_COUNTER_INT_STATUS_COUNTER_MASK	0x000000ff
+#define MBOX_RX_LOOKAHEAD_VALID_ADDRESS		0x00000805
+#define MBOX_INT_STATUS_ENABLE_ADDRESS		0x00000828
+#define MBOX_INT_STATUS_ENABLE_ERROR_LSB	7
+#define MBOX_INT_STATUS_ENABLE_ERROR_MASK	0x00000080
+#define MBOX_INT_STATUS_ENABLE_CPU_LSB		6
+#define MBOX_INT_STATUS_ENABLE_CPU_MASK		0x00000040
+#define MBOX_INT_STATUS_ENABLE_INT_LSB		5
+#define MBOX_INT_STATUS_ENABLE_INT_MASK		0x00000020
+#define MBOX_INT_STATUS_ENABLE_COUNTER_LSB	4
+#define MBOX_INT_STATUS_ENABLE_COUNTER_MASK	0x00000010
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_LSB	0
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK	0x0000000f
+#define MBOX_CPU_INT_STATUS_ENABLE_ADDRESS	0x00000819
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_LSB	0
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_MASK	0x000000ff
+#define MBOX_ERROR_STATUS_ENABLE_ADDRESS	0x0000081a
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB  1
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB   0
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK  0x00000001
+#define MBOX_COUNTER_INT_STATUS_ENABLE_ADDRESS	0x0000081b
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_LSB	0
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK	0x000000ff
+#define MBOX_COUNT_ADDRESS			0x00000820
+#define MBOX_COUNT_DEC_ADDRESS			0x00000840
+#define MBOX_WINDOW_DATA_ADDRESS		0x00000874
+#define MBOX_WINDOW_WRITE_ADDR_ADDRESS		0x00000878
+#define MBOX_WINDOW_READ_ADDR_ADDRESS		0x0000087c
+#define MBOX_CPU_DBG_SEL_ADDRESS		0x00000883
+#define MBOX_CPU_DBG_ADDRESS			0x00000884
+#define MBOX_RTC_BASE_ADDRESS			0x00000000
+#define MBOX_GPIO_BASE_ADDRESS			0x00005000
+#define MBOX_MBOX_BASE_ADDRESS			0x00008000
+
 #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
 
 /* Register definitions for first generation ath10k cards. These cards include
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
	ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC 09/12] ath10k: Mailbox address definitions
Date: Mon, 14 Nov 2016 17:33:39 +0100	[thread overview]
Message-ID: <1479141222-8493-10-git-send-email-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <1479141222-8493-1-git-send-email-erik.stromdahl@gmail.com>

Address definitions for SDIO/mbox based chipsets.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/hw.h |   53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 883547f..46142e9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -814,6 +814,59 @@ struct ath10k_hw_ops {
 #define QCA9887_EEPROM_ADDR_LO_MASK		0x00ff0000
 #define QCA9887_EEPROM_ADDR_LO_LSB		16
 
+#define MBOX_RESET_CONTROL_ADDRESS		0x00000000
+#define MBOX_HOST_INT_STATUS_ADDRESS		0x00000800
+#define MBOX_HOST_INT_STATUS_ERROR_LSB		7
+#define MBOX_HOST_INT_STATUS_ERROR_MASK		0x00000080
+#define MBOX_HOST_INT_STATUS_CPU_LSB		6
+#define MBOX_HOST_INT_STATUS_CPU_MASK		0x00000040
+#define MBOX_HOST_INT_STATUS_COUNTER_LSB	4
+#define MBOX_HOST_INT_STATUS_COUNTER_MASK	0x00000010
+#define MBOX_CPU_INT_STATUS_ADDRESS		0x00000801
+#define MBOX_ERROR_INT_STATUS_ADDRESS		0x00000802
+#define MBOX_ERROR_INT_STATUS_WAKEUP_LSB	2
+#define MBOX_ERROR_INT_STATUS_WAKEUP_MASK	0x00000004
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_LSB	1
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK	0x00000002
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_LSB	0
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK	0x00000001
+#define MBOX_COUNTER_INT_STATUS_ADDRESS		0x00000803
+#define MBOX_COUNTER_INT_STATUS_COUNTER_LSB	0
+#define MBOX_COUNTER_INT_STATUS_COUNTER_MASK	0x000000ff
+#define MBOX_RX_LOOKAHEAD_VALID_ADDRESS		0x00000805
+#define MBOX_INT_STATUS_ENABLE_ADDRESS		0x00000828
+#define MBOX_INT_STATUS_ENABLE_ERROR_LSB	7
+#define MBOX_INT_STATUS_ENABLE_ERROR_MASK	0x00000080
+#define MBOX_INT_STATUS_ENABLE_CPU_LSB		6
+#define MBOX_INT_STATUS_ENABLE_CPU_MASK		0x00000040
+#define MBOX_INT_STATUS_ENABLE_INT_LSB		5
+#define MBOX_INT_STATUS_ENABLE_INT_MASK		0x00000020
+#define MBOX_INT_STATUS_ENABLE_COUNTER_LSB	4
+#define MBOX_INT_STATUS_ENABLE_COUNTER_MASK	0x00000010
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_LSB	0
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK	0x0000000f
+#define MBOX_CPU_INT_STATUS_ENABLE_ADDRESS	0x00000819
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_LSB	0
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_MASK	0x000000ff
+#define MBOX_ERROR_STATUS_ENABLE_ADDRESS	0x0000081a
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB  1
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB   0
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK  0x00000001
+#define MBOX_COUNTER_INT_STATUS_ENABLE_ADDRESS	0x0000081b
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_LSB	0
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK	0x000000ff
+#define MBOX_COUNT_ADDRESS			0x00000820
+#define MBOX_COUNT_DEC_ADDRESS			0x00000840
+#define MBOX_WINDOW_DATA_ADDRESS		0x00000874
+#define MBOX_WINDOW_WRITE_ADDR_ADDRESS		0x00000878
+#define MBOX_WINDOW_READ_ADDR_ADDRESS		0x0000087c
+#define MBOX_CPU_DBG_SEL_ADDRESS		0x00000883
+#define MBOX_CPU_DBG_ADDRESS			0x00000884
+#define MBOX_RTC_BASE_ADDRESS			0x00000000
+#define MBOX_GPIO_BASE_ADDRESS			0x00005000
+#define MBOX_MBOX_BASE_ADDRESS			0x00008000
+
 #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
 
 /* Register definitions for first generation ath10k cards. These cards include
-- 
1.7.9.5


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2016-11-14 16:35 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-14 16:33 [RFC 00/12] ath10k sdio support Erik Stromdahl
2016-11-14 16:33 ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 01/12] ath10k: htc: made static function public Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 02/12] ath10k: htc: rx trailer lookahead support Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15  9:57   ` Michal Kazior
2016-11-15  9:57     ` Michal Kazior
2016-11-15 17:31     ` Erik Stromdahl
2016-11-15 17:31       ` Erik Stromdahl
2016-11-16 13:53       ` Valo, Kalle
2016-11-16 13:53         ` Valo, Kalle
2016-11-14 16:33 ` [RFC 03/12] ath10k: htc: Changed order of wait target and ep connect Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15 10:13   ` Michal Kazior
2016-11-15 10:13     ` Michal Kazior
2016-11-15 17:07     ` Erik Stromdahl
2016-11-15 17:07       ` Erik Stromdahl
2016-11-16 14:29       ` Michal Kazior
2016-11-16 14:29         ` Michal Kazior
2016-11-14 16:33 ` [RFC 04/12] ath10k: htc: refactorization Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15 10:19   ` Michal Kazior
2016-11-15 10:19     ` Michal Kazior
2016-11-17 16:32     ` Erik Stromdahl
2016-11-17 16:32       ` Erik Stromdahl
2016-11-18 14:49       ` Michal Kazior
2016-11-18 14:49         ` Michal Kazior
2016-11-14 16:33 ` [RFC 05/12] ath10k: htc: Added ATH10K_HTC_FLAG_BUNDLE_LSB Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15 10:25   ` Michal Kazior
2016-11-15 10:25     ` Michal Kazior
2016-11-15 10:46     ` Valo, Kalle
2016-11-15 10:46       ` Valo, Kalle
2016-11-14 16:33 ` [RFC 06/12] ath10k: bmi: Added SOC reg read/write functions Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15 10:28   ` Michal Kazior
2016-11-15 10:28     ` Michal Kazior
2016-11-15 17:11     ` Erik Stromdahl
2016-11-15 17:11       ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 07/12] ath10k: Added SDIO dbg masks Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 08/12] ath10k: Added ATH10K_BUS_SDIO enum Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-14 16:33 ` Erik Stromdahl [this message]
2016-11-14 16:33   ` [RFC 09/12] ath10k: Mailbox address definitions Erik Stromdahl
2016-11-15 10:31   ` Michal Kazior
2016-11-15 10:31     ` Michal Kazior
2016-11-15 10:48     ` Valo, Kalle
2016-11-15 10:48       ` Valo, Kalle
2016-11-14 16:33 ` [RFC 10/12] ath10k: Added QCA65XX hw definition Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-15 10:34   ` Michal Kazior
2016-11-15 10:34     ` Michal Kazior
2016-11-15 10:54     ` Valo, Kalle
2016-11-15 10:54       ` Valo, Kalle
2016-11-15 18:34       ` Erik Stromdahl
2016-11-15 18:34         ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 11/12] ath10k: Added more host_interest members Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl
2016-11-14 16:33 ` [RFC 12/12] ath10k: Added sdio support Erik Stromdahl
2016-11-14 16:33   ` Erik Stromdahl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479141222-8493-10-git-send-email-erik.stromdahl@gmail.com \
    --to=erik.stromdahl@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.