[PATCH 00/15] arm64/kvm: use common sysreg definitions

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

Currently we duplicate effort in maintaining system register encodings across
arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
is unfortunate, and as encodings are encoded in-place without any mnemonic,
this ends up more painful to read than necessary.

This series ameliorates this by making <asm/sysreg.h> the canonical location
for (architected) system register encodings, with other users building atop of
this, e.g. with KVM deriving its sysreg table values from the common mnemonics.

I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
registers for now, but these could be handled similarly. Largely, I've stuck to
only what KVM needs, though for the debug and perfmon groups it was easier to
take the whole group from the ARM ARM than to filter them to only what KVM
needed today.

To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
sys_regs_generic_v8.o on a section-by-section basis before and after the series
is applied. The .text, .data, and .rodata sections (and most others) are
identical. The __bug_table section, and some .debug* sections differ, and this
appears to be due to line numbers changing due to removed lines.

One thing I wasn't sure how to address was banks of registers such as
PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
for these I've made the macros take an 'n' parameter. It would be nice to be
consistent either way, and I'm happy to expand those cases.

I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
tag.

Thanks,
Mark.

Since RFC [2]:
* Rebase to v4.11-rc1, solving a trivial conflict.
* Handle the physical counter registers.
* Verified section differences again.

Thanks,
Mark.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git arm64/common-sysreg
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-January/484693.html

Mark Rutland (15):
  arm64: sysreg: sort by encoding
  arm64: sysreg: add debug system registers
  arm64: sysreg: add performance monitor registers
  arm64: sysreg: subsume GICv3 sysreg definitions
  arm64: sysreg: add physical timer registers
  arm64: sysreg: add register encodings used by KVM
  arm64: sysreg: add Set/Way sys encodings
  KVM: arm64: add SYS_DESC()
  KVM: arm64: Use common debug sysreg definitions
  KVM: arm64: Use common performance monitor sysreg definitions
  KVM: arm64: Use common GICv3 sysreg definitions
  KVM: arm64: Use common physical timer sysreg definitions
  KVM: arm64: use common invariant sysreg definitions
  KVM: arm64: Use common sysreg definitions
  KVM: arm64: Use common Set/Way sys definitions

 arch/arm64/include/asm/arch_gicv3.h  |  81 ++------
 arch/arm64/include/asm/sysreg.h      | 162 +++++++++++++++-
 arch/arm64/kernel/head.S             |   8 +-
 arch/arm64/kvm/sys_regs.c            | 358 +++++++++++------------------------
 arch/arm64/kvm/sys_regs.h            |   5 +
 arch/arm64/kvm/sys_regs_generic_v8.c |   4 +-
 6 files changed, 284 insertions(+), 334 deletions(-)

-- 
1.9.1

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

Currently we duplicate effort in maintaining system register encodings across
arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
is unfortunate, and as encodings are encoded in-place without any mnemonic,
this ends up more painful to read than necessary.

This series ameliorates this by making <asm/sysreg.h> the canonical location
for (architected) system register encodings, with other users building atop of
this, e.g. with KVM deriving its sysreg table values from the common mnemonics.

I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
registers for now, but these could be handled similarly. Largely, I've stuck to
only what KVM needs, though for the debug and perfmon groups it was easier to
take the whole group from the ARM ARM than to filter them to only what KVM
needed today.

To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
sys_regs_generic_v8.o on a section-by-section basis before and after the series
is applied. The .text, .data, and .rodata sections (and most others) are
identical. The __bug_table section, and some .debug* sections differ, and this
appears to be due to line numbers changing due to removed lines.

One thing I wasn't sure how to address was banks of registers such as
PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
for these I've made the macros take an 'n' parameter. It would be nice to be
consistent either way, and I'm happy to expand those cases.

I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
tag.

Thanks,
Mark.

Since RFC [2]:
* Rebase to v4.11-rc1, solving a trivial conflict.
* Handle the physical counter registers.
* Verified section differences again.

Thanks,
Mark.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git arm64/common-sysreg
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-January/484693.html

Mark Rutland (15):
  arm64: sysreg: sort by encoding
  arm64: sysreg: add debug system registers
  arm64: sysreg: add performance monitor registers
  arm64: sysreg: subsume GICv3 sysreg definitions
  arm64: sysreg: add physical timer registers
  arm64: sysreg: add register encodings used by KVM
  arm64: sysreg: add Set/Way sys encodings
  KVM: arm64: add SYS_DESC()
  KVM: arm64: Use common debug sysreg definitions
  KVM: arm64: Use common performance monitor sysreg definitions
  KVM: arm64: Use common GICv3 sysreg definitions
  KVM: arm64: Use common physical timer sysreg definitions
  KVM: arm64: use common invariant sysreg definitions
  KVM: arm64: Use common sysreg definitions
  KVM: arm64: Use common Set/Way sys definitions

 arch/arm64/include/asm/arch_gicv3.h  |  81 ++------
 arch/arm64/include/asm/sysreg.h      | 162 +++++++++++++++-
 arch/arm64/kernel/head.S             |   8 +-
 arch/arm64/kvm/sys_regs.c            | 358 +++++++++++------------------------
 arch/arm64/kvm/sys_regs.h            |   5 +
 arch/arm64/kvm/sys_regs_generic_v8.c |   4 +-
 6 files changed, 284 insertions(+), 334 deletions(-)

-- 
1.9.1

[PATCH 01/15] arm64: sysreg: sort by encoding

[Mark Rutland]

Out sysreg definitions are largely (but not entirely) in ascending order
of op0:op1:CRn:CRm:op2.

It would be preferable to enforce this sort, as this makes it easier to
verify the set of encodings against documentation, and provides an
obvious location for each addition in future, minimising conflicts.

This patch enforces this order, by moving the few items that break it.
There should be no functional change.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index ac24b6e..e6498ac 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -81,6 +81,14 @@
 
 #endif	/* CONFIG_BROKEN_GAS_INST */
 
+#define REG_PSTATE_PAN_IMM		sys_reg(0, 0, 4, 0, 4)
+#define REG_PSTATE_UAO_IMM		sys_reg(0, 0, 4, 0, 3)
+
+#define SET_PSTATE_PAN(x) __emit_inst(0xd5000000 | REG_PSTATE_PAN_IMM |	\
+				      (!!x)<<8 | 0x1f)
+#define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
+				      (!!x)<<8 | 0x1f)
+
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
@@ -118,17 +126,10 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
-#define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
-#define REG_PSTATE_PAN_IMM		sys_reg(0, 0, 4, 0, 4)
-#define REG_PSTATE_UAO_IMM		sys_reg(0, 0, 4, 0, 3)
-
-#define SET_PSTATE_PAN(x) __emit_inst(0xd5000000 | REG_PSTATE_PAN_IMM |	\
-				      (!!x)<<8 | 0x1f)
-#define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
-				      (!!x)<<8 | 0x1f)
+#define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
-- 
1.9.1

[PATCH 01/15] arm64: sysreg: sort by encoding

[Mark Rutland]

Out sysreg definitions are largely (but not entirely) in ascending order
of op0:op1:CRn:CRm:op2.

It would be preferable to enforce this sort, as this makes it easier to
verify the set of encodings against documentation, and provides an
obvious location for each addition in future, minimising conflicts.

This patch enforces this order, by moving the few items that break it.
There should be no functional change.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index ac24b6e..e6498ac 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -81,6 +81,14 @@
 
 #endif	/* CONFIG_BROKEN_GAS_INST */
 
+#define REG_PSTATE_PAN_IMM		sys_reg(0, 0, 4, 0, 4)
+#define REG_PSTATE_UAO_IMM		sys_reg(0, 0, 4, 0, 3)
+
+#define SET_PSTATE_PAN(x) __emit_inst(0xd5000000 | REG_PSTATE_PAN_IMM |	\
+				      (!!x)<<8 | 0x1f)
+#define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
+				      (!!x)<<8 | 0x1f)
+
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
@@ -118,17 +126,10 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
-#define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
-#define REG_PSTATE_PAN_IMM		sys_reg(0, 0, 4, 0, 4)
-#define REG_PSTATE_UAO_IMM		sys_reg(0, 0, 4, 0, 3)
-
-#define SET_PSTATE_PAN(x) __emit_inst(0xd5000000 | REG_PSTATE_PAN_IMM |	\
-				      (!!x)<<8 | 0x1f)
-#define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
-				      (!!x)<<8 | 0x1f)
+#define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
-- 
1.9.1

[PATCH 02/15] arm64: sysreg: add debug system registers

[Mark Rutland]

This patch adds sysreg definitions for system registers in the debug and
trace system register encoding space. Subsequent patches will make use
of these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-5.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index e6498ac..b54f8a4 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -89,6 +89,29 @@
 #define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
 				      (!!x)<<8 | 0x1f)
 
+#define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
+#define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
+#define SYS_MDSCR_EL1			sys_reg(2, 0, 0, 2, 2)
+#define SYS_OSDTRTX_EL1			sys_reg(2, 0, 0, 3, 2)
+#define SYS_OSECCR_EL1			sys_reg(2, 0, 0, 6, 2)
+#define SYS_DBGBVRn_EL1(n)		sys_reg(2, 0, 0, n, 4)
+#define SYS_DBGBCRn_EL1(n)		sys_reg(2, 0, 0, n, 5)
+#define SYS_DBGWVRn_EL1(n)		sys_reg(2, 0, 0, n, 6)
+#define SYS_DBGWCRn_EL1(n)		sys_reg(2, 0, 0, n, 7)
+#define SYS_MDRAR_EL1			sys_reg(2, 0, 1, 0, 0)
+#define SYS_OSLAR_EL1			sys_reg(2, 0, 1, 0, 4)
+#define SYS_OSLSR_EL1			sys_reg(2, 0, 1, 1, 4)
+#define SYS_OSDLR_EL1			sys_reg(2, 0, 1, 3, 4)
+#define SYS_DBGPRCR_EL1			sys_reg(2, 0, 1, 4, 4)
+#define SYS_DBGCLAIMSET_EL1		sys_reg(2, 0, 7, 8, 6)
+#define SYS_DBGCLAIMCLR_EL1		sys_reg(2, 0, 7, 9, 6)
+#define SYS_DBGAUTHSTATUS_EL1		sys_reg(2, 0, 7, 14, 6)
+#define SYS_MDCCSR_EL0			sys_reg(2, 3, 0, 1, 0)
+#define SYS_DBGDTR_EL0			sys_reg(2, 3, 0, 4, 0)
+#define SYS_DBGDTRRX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGDTRTX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGVCR32_EL2		sys_reg(2, 4, 0, 7, 0)
+
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
-- 
1.9.1

[PATCH 02/15] arm64: sysreg: add debug system registers

[Mark Rutland]

This patch adds sysreg definitions for system registers in the debug and
trace system register encoding space. Subsequent patches will make use
of these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-5.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index e6498ac..b54f8a4 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -89,6 +89,29 @@
 #define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
 				      (!!x)<<8 | 0x1f)
 
+#define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
+#define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
+#define SYS_MDSCR_EL1			sys_reg(2, 0, 0, 2, 2)
+#define SYS_OSDTRTX_EL1			sys_reg(2, 0, 0, 3, 2)
+#define SYS_OSECCR_EL1			sys_reg(2, 0, 0, 6, 2)
+#define SYS_DBGBVRn_EL1(n)		sys_reg(2, 0, 0, n, 4)
+#define SYS_DBGBCRn_EL1(n)		sys_reg(2, 0, 0, n, 5)
+#define SYS_DBGWVRn_EL1(n)		sys_reg(2, 0, 0, n, 6)
+#define SYS_DBGWCRn_EL1(n)		sys_reg(2, 0, 0, n, 7)
+#define SYS_MDRAR_EL1			sys_reg(2, 0, 1, 0, 0)
+#define SYS_OSLAR_EL1			sys_reg(2, 0, 1, 0, 4)
+#define SYS_OSLSR_EL1			sys_reg(2, 0, 1, 1, 4)
+#define SYS_OSDLR_EL1			sys_reg(2, 0, 1, 3, 4)
+#define SYS_DBGPRCR_EL1			sys_reg(2, 0, 1, 4, 4)
+#define SYS_DBGCLAIMSET_EL1		sys_reg(2, 0, 7, 8, 6)
+#define SYS_DBGCLAIMCLR_EL1		sys_reg(2, 0, 7, 9, 6)
+#define SYS_DBGAUTHSTATUS_EL1		sys_reg(2, 0, 7, 14, 6)
+#define SYS_MDCCSR_EL0			sys_reg(2, 3, 0, 1, 0)
+#define SYS_DBGDTR_EL0			sys_reg(2, 3, 0, 4, 0)
+#define SYS_DBGDTRRX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGDTRTX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGVCR32_EL2		sys_reg(2, 4, 0, 7, 0)
+
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
-- 
1.9.1

[PATCH 03/15] arm64: sysreg: add performance monitor registers

[Mark Rutland]

This patch adds sysreg definitions for system registers which are part
of the performance monitors extension. Subsequent patches will make use
of these definitions.

The set of registers is described in ARM DDI 0487A.k_iss10775, Table
D5-9. The encodings were taken from Table C5-6 in the same document.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index b54f8a4..3498d02 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,11 +149,36 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
+#define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
+#define SYS_PMCR_EL0			sys_reg(3, 3, 9, 12, 0)
+#define SYS_PMCNTENSET_EL0		sys_reg(3, 3, 9, 12, 1)
+#define SYS_PMCNTENCLR_EL0		sys_reg(3, 3, 9, 12, 2)
+#define SYS_PMOVSCLR_EL0		sys_reg(3, 3, 9, 12, 3)
+#define SYS_PMSWINC_EL0			sys_reg(3, 3, 9, 12, 4)
+#define SYS_PMSELR_EL0			sys_reg(3, 3, 9, 12, 5)
+#define SYS_PMCEID0_EL0			sys_reg(3, 3, 9, 12, 6)
+#define SYS_PMCEID1_EL0			sys_reg(3, 3, 9, 12, 7)
+#define SYS_PMCCNTR_EL0			sys_reg(3, 3, 9, 13, 0)
+#define SYS_PMXEVTYPER_EL0		sys_reg(3, 3, 9, 13, 1)
+#define SYS_PMXEVCNTR_EL0		sys_reg(3, 3, 9, 13, 2)
+#define SYS_PMUSERENR_EL0		sys_reg(3, 3, 9, 14, 0)
+#define SYS_PMOVSSET_EL0		sys_reg(3, 3, 9, 14, 3)
+
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
+#define __PMEV_op2(n)			((n) & 0x7)
+#define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
+#define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
+#define __TYPER_CRm(n)			(0xc | (((n) >> 3) & 0x3))
+#define SYS_PMEVTYPERn_EL0(n)		sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n))
+
+#define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
+
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
 #define SCTLR_ELx_I	(1 << 12)
-- 
1.9.1

[PATCH 03/15] arm64: sysreg: add performance monitor registers

[Mark Rutland]

This patch adds sysreg definitions for system registers which are part
of the performance monitors extension. Subsequent patches will make use
of these definitions.

The set of registers is described in ARM DDI 0487A.k_iss10775, Table
D5-9. The encodings were taken from Table C5-6 in the same document.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index b54f8a4..3498d02 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,11 +149,36 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
+#define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
+#define SYS_PMCR_EL0			sys_reg(3, 3, 9, 12, 0)
+#define SYS_PMCNTENSET_EL0		sys_reg(3, 3, 9, 12, 1)
+#define SYS_PMCNTENCLR_EL0		sys_reg(3, 3, 9, 12, 2)
+#define SYS_PMOVSCLR_EL0		sys_reg(3, 3, 9, 12, 3)
+#define SYS_PMSWINC_EL0			sys_reg(3, 3, 9, 12, 4)
+#define SYS_PMSELR_EL0			sys_reg(3, 3, 9, 12, 5)
+#define SYS_PMCEID0_EL0			sys_reg(3, 3, 9, 12, 6)
+#define SYS_PMCEID1_EL0			sys_reg(3, 3, 9, 12, 7)
+#define SYS_PMCCNTR_EL0			sys_reg(3, 3, 9, 13, 0)
+#define SYS_PMXEVTYPER_EL0		sys_reg(3, 3, 9, 13, 1)
+#define SYS_PMXEVCNTR_EL0		sys_reg(3, 3, 9, 13, 2)
+#define SYS_PMUSERENR_EL0		sys_reg(3, 3, 9, 14, 0)
+#define SYS_PMOVSSET_EL0		sys_reg(3, 3, 9, 14, 3)
+
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
+#define __PMEV_op2(n)			((n) & 0x7)
+#define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
+#define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
+#define __TYPER_CRm(n)			(0xc | (((n) >> 3) & 0x3))
+#define SYS_PMEVTYPERn_EL0(n)		sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n))
+
+#define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
+
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
 #define SCTLR_ELx_I	(1 << 12)
-- 
1.9.1

[PATCH 04/15] arm64: sysreg: subsume GICv3 sysreg definitions

[Mark Rutland]

Unlike most sysreg defintiions, the GICv3 definitions don't have a SYS_
prefix, and they don't live in <asm/sysreg.h>. Additionally, some
definitions are duplicated elsewhere (e.g. in the KVM save/restore
code).

For consistency, and to make it possible to share a common definition
for these sysregs, this patch moves the definitions to <asm/sysreg.h>,
adding a SYS_ prefix, and sorting the registers per their encoding.
Existing users of the definitions are fixed up so that this change is
not problematic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/arch_gicv3.h | 81 ++++++-------------------------------
 arch/arm64/include/asm/sysreg.h     | 52 ++++++++++++++++++++++++
 arch/arm64/kernel/head.S            |  8 ++--
 3 files changed, 69 insertions(+), 72 deletions(-)

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index f37e3a2..1a98bc8 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -20,69 +20,14 @@
 
 #include <asm/sysreg.h>
 
-#define ICC_EOIR1_EL1			sys_reg(3, 0, 12, 12, 1)
-#define ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
-#define ICC_IAR1_EL1			sys_reg(3, 0, 12, 12, 0)
-#define ICC_SGI1R_EL1			sys_reg(3, 0, 12, 11, 5)
-#define ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
-#define ICC_CTLR_EL1			sys_reg(3, 0, 12, 12, 4)
-#define ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
-#define ICC_GRPEN1_EL1			sys_reg(3, 0, 12, 12, 7)
-#define ICC_BPR1_EL1			sys_reg(3, 0, 12, 12, 3)
-
-#define ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
-
-/*
- * System register definitions
- */
-#define ICH_VSEIR_EL2			sys_reg(3, 4, 12, 9, 4)
-#define ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
-#define ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
-#define ICH_MISR_EL2			sys_reg(3, 4, 12, 11, 2)
-#define ICH_EISR_EL2			sys_reg(3, 4, 12, 11, 3)
-#define ICH_ELSR_EL2			sys_reg(3, 4, 12, 11, 5)
-#define ICH_VMCR_EL2			sys_reg(3, 4, 12, 11, 7)
-
-#define __LR0_EL2(x)			sys_reg(3, 4, 12, 12, x)
-#define __LR8_EL2(x)			sys_reg(3, 4, 12, 13, x)
-
-#define ICH_LR0_EL2			__LR0_EL2(0)
-#define ICH_LR1_EL2			__LR0_EL2(1)
-#define ICH_LR2_EL2			__LR0_EL2(2)
-#define ICH_LR3_EL2			__LR0_EL2(3)
-#define ICH_LR4_EL2			__LR0_EL2(4)
-#define ICH_LR5_EL2			__LR0_EL2(5)
-#define ICH_LR6_EL2			__LR0_EL2(6)
-#define ICH_LR7_EL2			__LR0_EL2(7)
-#define ICH_LR8_EL2			__LR8_EL2(0)
-#define ICH_LR9_EL2			__LR8_EL2(1)
-#define ICH_LR10_EL2			__LR8_EL2(2)
-#define ICH_LR11_EL2			__LR8_EL2(3)
-#define ICH_LR12_EL2			__LR8_EL2(4)
-#define ICH_LR13_EL2			__LR8_EL2(5)
-#define ICH_LR14_EL2			__LR8_EL2(6)
-#define ICH_LR15_EL2			__LR8_EL2(7)
-
-#define __AP0Rx_EL2(x)			sys_reg(3, 4, 12, 8, x)
-#define ICH_AP0R0_EL2			__AP0Rx_EL2(0)
-#define ICH_AP0R1_EL2			__AP0Rx_EL2(1)
-#define ICH_AP0R2_EL2			__AP0Rx_EL2(2)
-#define ICH_AP0R3_EL2			__AP0Rx_EL2(3)
-
-#define __AP1Rx_EL2(x)			sys_reg(3, 4, 12, 9, x)
-#define ICH_AP1R0_EL2			__AP1Rx_EL2(0)
-#define ICH_AP1R1_EL2			__AP1Rx_EL2(1)
-#define ICH_AP1R2_EL2			__AP1Rx_EL2(2)
-#define ICH_AP1R3_EL2			__AP1Rx_EL2(3)
-
 #ifndef __ASSEMBLY__
 
 #include <linux/stringify.h>
 #include <asm/barrier.h>
 #include <asm/cacheflush.h>
 
-#define read_gicreg			read_sysreg_s
-#define write_gicreg			write_sysreg_s
+#define read_gicreg(r)			read_sysreg_s(SYS_ ## r)
+#define write_gicreg(v, r)		write_sysreg_s(v, SYS_ ## r)
 
 /*
  * Low-level accessors
@@ -93,13 +38,13 @@
 
 static inline void gic_write_eoir(u32 irq)
 {
-	write_sysreg_s(irq, ICC_EOIR1_EL1);
+	write_sysreg_s(irq, SYS_ICC_EOIR1_EL1);
 	isb();
 }
 
 static inline void gic_write_dir(u32 irq)
 {
-	write_sysreg_s(irq, ICC_DIR_EL1);
+	write_sysreg_s(irq, SYS_ICC_DIR_EL1);
 	isb();
 }
 
@@ -107,7 +52,7 @@ static inline u64 gic_read_iar_common(void)
 {
 	u64 irqstat;
 
-	irqstat = read_sysreg_s(ICC_IAR1_EL1);
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
 	dsb(sy);
 	return irqstat;
 }
@@ -124,7 +69,7 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
 	u64 irqstat;
 
 	nops(8);
-	irqstat = read_sysreg_s(ICC_IAR1_EL1);
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
 	nops(4);
 	mb();
 
@@ -133,40 +78,40 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
 
 static inline void gic_write_pmr(u32 val)
 {
-	write_sysreg_s(val, ICC_PMR_EL1);
+	write_sysreg_s(val, SYS_ICC_PMR_EL1);
 }
 
 static inline void gic_write_ctlr(u32 val)
 {
-	write_sysreg_s(val, ICC_CTLR_EL1);
+	write_sysreg_s(val, SYS_ICC_CTLR_EL1);
 	isb();
 }
 
 static inline void gic_write_grpen1(u32 val)
 {
-	write_sysreg_s(val, ICC_GRPEN1_EL1);
+	write_sysreg_s(val, SYS_ICC_GRPEN1_EL1);
 	isb();
 }
 
 static inline void gic_write_sgi1r(u64 val)
 {
-	write_sysreg_s(val, ICC_SGI1R_EL1);
+	write_sysreg_s(val, SYS_ICC_SGI1R_EL1);
 }
 
 static inline u32 gic_read_sre(void)
 {
-	return read_sysreg_s(ICC_SRE_EL1);
+	return read_sysreg_s(SYS_ICC_SRE_EL1);
 }
 
 static inline void gic_write_sre(u32 val)
 {
-	write_sysreg_s(val, ICC_SRE_EL1);
+	write_sysreg_s(val, SYS_ICC_SRE_EL1);
 	isb();
 }
 
 static inline void gic_write_bpr1(u32 val)
 {
-	asm volatile("msr_s " __stringify(ICC_BPR1_EL1) ", %0" : : "r" (val));
+	write_sysreg_s(val, SYS_ICC_BPR1_EL1);
 }
 
 #define gic_read_typer(c)		readq_relaxed(c)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 3498d02..9dc30bc 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,9 +149,20 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
+
 #define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
 #define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
 
+#define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
+#define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
+#define SYS_ICC_IAR1_EL1		sys_reg(3, 0, 12, 12, 0)
+#define SYS_ICC_EOIR1_EL1		sys_reg(3, 0, 12, 12, 1)
+#define SYS_ICC_BPR1_EL1		sys_reg(3, 0, 12, 12, 3)
+#define SYS_ICC_CTLR_EL1		sys_reg(3, 0, 12, 12, 4)
+#define SYS_ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
+#define SYS_ICC_GRPEN1_EL1		sys_reg(3, 0, 12, 12, 7)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
@@ -179,6 +190,47 @@
 
 #define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
 
+#define __SYS__AP0Rx_EL2(x)		sys_reg(3, 4, 12, 8, x)
+#define SYS_ICH_AP0R0_EL2		__SYS__AP0Rx_EL2(0)
+#define SYS_ICH_AP0R1_EL2		__SYS__AP0Rx_EL2(1)
+#define SYS_ICH_AP0R2_EL2		__SYS__AP0Rx_EL2(2)
+#define SYS_ICH_AP0R3_EL2		__SYS__AP0Rx_EL2(3)
+
+#define __SYS__AP1Rx_EL2(x)		sys_reg(3, 4, 12, 9, x)
+#define SYS_ICH_AP1R0_EL2		__SYS__AP1Rx_EL2(0)
+#define SYS_ICH_AP1R1_EL2		__SYS__AP1Rx_EL2(1)
+#define SYS_ICH_AP1R2_EL2		__SYS__AP1Rx_EL2(2)
+#define SYS_ICH_AP1R3_EL2		__SYS__AP1Rx_EL2(3)
+
+#define SYS_ICH_VSEIR_EL2		sys_reg(3, 4, 12, 9, 4)
+#define SYS_ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
+#define SYS_ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
+#define SYS_ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
+#define SYS_ICH_MISR_EL2		sys_reg(3, 4, 12, 11, 2)
+#define SYS_ICH_EISR_EL2		sys_reg(3, 4, 12, 11, 3)
+#define SYS_ICH_ELSR_EL2		sys_reg(3, 4, 12, 11, 5)
+#define SYS_ICH_VMCR_EL2		sys_reg(3, 4, 12, 11, 7)
+
+#define __SYS__LR0_EL2(x)		sys_reg(3, 4, 12, 12, x)
+#define SYS_ICH_LR0_EL2			__SYS__LR0_EL2(0)
+#define SYS_ICH_LR1_EL2			__SYS__LR0_EL2(1)
+#define SYS_ICH_LR2_EL2			__SYS__LR0_EL2(2)
+#define SYS_ICH_LR3_EL2			__SYS__LR0_EL2(3)
+#define SYS_ICH_LR4_EL2			__SYS__LR0_EL2(4)
+#define SYS_ICH_LR5_EL2			__SYS__LR0_EL2(5)
+#define SYS_ICH_LR6_EL2			__SYS__LR0_EL2(6)
+#define SYS_ICH_LR7_EL2			__SYS__LR0_EL2(7)
+
+#define __SYS__LR8_EL2(x)		sys_reg(3, 4, 12, 13, x)
+#define SYS_ICH_LR8_EL2			__SYS__LR8_EL2(0)
+#define SYS_ICH_LR9_EL2			__SYS__LR8_EL2(1)
+#define SYS_ICH_LR10_EL2		__SYS__LR8_EL2(2)
+#define SYS_ICH_LR11_EL2		__SYS__LR8_EL2(3)
+#define SYS_ICH_LR12_EL2		__SYS__LR8_EL2(4)
+#define SYS_ICH_LR13_EL2		__SYS__LR8_EL2(5)
+#define SYS_ICH_LR14_EL2		__SYS__LR8_EL2(6)
+#define SYS_ICH_LR15_EL2		__SYS__LR8_EL2(7)
+
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
 #define SCTLR_ELx_I	(1 << 12)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 4fb6ccd..95ae40ac 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -594,14 +594,14 @@ set_hcr:
 	cmp	x0, #1
 	b.ne	3f
 
-	mrs_s	x0, ICC_SRE_EL2
+	mrs_s	x0, SYS_ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
 	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
-	msr_s	ICC_SRE_EL2, x0
+	msr_s	SYS_ICC_SRE_EL2, x0
 	isb					// Make sure SRE is now set
-	mrs_s	x0, ICC_SRE_EL2			// Read SRE back,
+	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
 	tbz	x0, #0, 3f			// and check that it sticks
-	msr_s	ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
+	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
 
 3:
 #endif
-- 
1.9.1

[PATCH 04/15] arm64: sysreg: subsume GICv3 sysreg definitions

[Mark Rutland]

Unlike most sysreg defintiions, the GICv3 definitions don't have a SYS_
prefix, and they don't live in <asm/sysreg.h>. Additionally, some
definitions are duplicated elsewhere (e.g. in the KVM save/restore
code).

For consistency, and to make it possible to share a common definition
for these sysregs, this patch moves the definitions to <asm/sysreg.h>,
adding a SYS_ prefix, and sorting the registers per their encoding.
Existing users of the definitions are fixed up so that this change is
not problematic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/arch_gicv3.h | 81 ++++++-------------------------------
 arch/arm64/include/asm/sysreg.h     | 52 ++++++++++++++++++++++++
 arch/arm64/kernel/head.S            |  8 ++--
 3 files changed, 69 insertions(+), 72 deletions(-)

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index f37e3a2..1a98bc8 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -20,69 +20,14 @@
 
 #include <asm/sysreg.h>
 
-#define ICC_EOIR1_EL1			sys_reg(3, 0, 12, 12, 1)
-#define ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
-#define ICC_IAR1_EL1			sys_reg(3, 0, 12, 12, 0)
-#define ICC_SGI1R_EL1			sys_reg(3, 0, 12, 11, 5)
-#define ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
-#define ICC_CTLR_EL1			sys_reg(3, 0, 12, 12, 4)
-#define ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
-#define ICC_GRPEN1_EL1			sys_reg(3, 0, 12, 12, 7)
-#define ICC_BPR1_EL1			sys_reg(3, 0, 12, 12, 3)
-
-#define ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
-
-/*
- * System register definitions
- */
-#define ICH_VSEIR_EL2			sys_reg(3, 4, 12, 9, 4)
-#define ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
-#define ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
-#define ICH_MISR_EL2			sys_reg(3, 4, 12, 11, 2)
-#define ICH_EISR_EL2			sys_reg(3, 4, 12, 11, 3)
-#define ICH_ELSR_EL2			sys_reg(3, 4, 12, 11, 5)
-#define ICH_VMCR_EL2			sys_reg(3, 4, 12, 11, 7)
-
-#define __LR0_EL2(x)			sys_reg(3, 4, 12, 12, x)
-#define __LR8_EL2(x)			sys_reg(3, 4, 12, 13, x)
-
-#define ICH_LR0_EL2			__LR0_EL2(0)
-#define ICH_LR1_EL2			__LR0_EL2(1)
-#define ICH_LR2_EL2			__LR0_EL2(2)
-#define ICH_LR3_EL2			__LR0_EL2(3)
-#define ICH_LR4_EL2			__LR0_EL2(4)
-#define ICH_LR5_EL2			__LR0_EL2(5)
-#define ICH_LR6_EL2			__LR0_EL2(6)
-#define ICH_LR7_EL2			__LR0_EL2(7)
-#define ICH_LR8_EL2			__LR8_EL2(0)
-#define ICH_LR9_EL2			__LR8_EL2(1)
-#define ICH_LR10_EL2			__LR8_EL2(2)
-#define ICH_LR11_EL2			__LR8_EL2(3)
-#define ICH_LR12_EL2			__LR8_EL2(4)
-#define ICH_LR13_EL2			__LR8_EL2(5)
-#define ICH_LR14_EL2			__LR8_EL2(6)
-#define ICH_LR15_EL2			__LR8_EL2(7)
-
-#define __AP0Rx_EL2(x)			sys_reg(3, 4, 12, 8, x)
-#define ICH_AP0R0_EL2			__AP0Rx_EL2(0)
-#define ICH_AP0R1_EL2			__AP0Rx_EL2(1)
-#define ICH_AP0R2_EL2			__AP0Rx_EL2(2)
-#define ICH_AP0R3_EL2			__AP0Rx_EL2(3)
-
-#define __AP1Rx_EL2(x)			sys_reg(3, 4, 12, 9, x)
-#define ICH_AP1R0_EL2			__AP1Rx_EL2(0)
-#define ICH_AP1R1_EL2			__AP1Rx_EL2(1)
-#define ICH_AP1R2_EL2			__AP1Rx_EL2(2)
-#define ICH_AP1R3_EL2			__AP1Rx_EL2(3)
-
 #ifndef __ASSEMBLY__
 
 #include <linux/stringify.h>
 #include <asm/barrier.h>
 #include <asm/cacheflush.h>
 
-#define read_gicreg			read_sysreg_s
-#define write_gicreg			write_sysreg_s
+#define read_gicreg(r)			read_sysreg_s(SYS_ ## r)
+#define write_gicreg(v, r)		write_sysreg_s(v, SYS_ ## r)
 
 /*
  * Low-level accessors
@@ -93,13 +38,13 @@
 
 static inline void gic_write_eoir(u32 irq)
 {
-	write_sysreg_s(irq, ICC_EOIR1_EL1);
+	write_sysreg_s(irq, SYS_ICC_EOIR1_EL1);
 	isb();
 }
 
 static inline void gic_write_dir(u32 irq)
 {
-	write_sysreg_s(irq, ICC_DIR_EL1);
+	write_sysreg_s(irq, SYS_ICC_DIR_EL1);
 	isb();
 }
 
@@ -107,7 +52,7 @@ static inline u64 gic_read_iar_common(void)
 {
 	u64 irqstat;
 
-	irqstat = read_sysreg_s(ICC_IAR1_EL1);
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
 	dsb(sy);
 	return irqstat;
 }
@@ -124,7 +69,7 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
 	u64 irqstat;
 
 	nops(8);
-	irqstat = read_sysreg_s(ICC_IAR1_EL1);
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
 	nops(4);
 	mb();
 
@@ -133,40 +78,40 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
 
 static inline void gic_write_pmr(u32 val)
 {
-	write_sysreg_s(val, ICC_PMR_EL1);
+	write_sysreg_s(val, SYS_ICC_PMR_EL1);
 }
 
 static inline void gic_write_ctlr(u32 val)
 {
-	write_sysreg_s(val, ICC_CTLR_EL1);
+	write_sysreg_s(val, SYS_ICC_CTLR_EL1);
 	isb();
 }
 
 static inline void gic_write_grpen1(u32 val)
 {
-	write_sysreg_s(val, ICC_GRPEN1_EL1);
+	write_sysreg_s(val, SYS_ICC_GRPEN1_EL1);
 	isb();
 }
 
 static inline void gic_write_sgi1r(u64 val)
 {
-	write_sysreg_s(val, ICC_SGI1R_EL1);
+	write_sysreg_s(val, SYS_ICC_SGI1R_EL1);
 }
 
 static inline u32 gic_read_sre(void)
 {
-	return read_sysreg_s(ICC_SRE_EL1);
+	return read_sysreg_s(SYS_ICC_SRE_EL1);
 }
 
 static inline void gic_write_sre(u32 val)
 {
-	write_sysreg_s(val, ICC_SRE_EL1);
+	write_sysreg_s(val, SYS_ICC_SRE_EL1);
 	isb();
 }
 
 static inline void gic_write_bpr1(u32 val)
 {
-	asm volatile("msr_s " __stringify(ICC_BPR1_EL1) ", %0" : : "r" (val));
+	write_sysreg_s(val, SYS_ICC_BPR1_EL1);
 }
 
 #define gic_read_typer(c)		readq_relaxed(c)
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 3498d02..9dc30bc 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -149,9 +149,20 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
+
 #define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
 #define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
 
+#define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
+#define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
+#define SYS_ICC_IAR1_EL1		sys_reg(3, 0, 12, 12, 0)
+#define SYS_ICC_EOIR1_EL1		sys_reg(3, 0, 12, 12, 1)
+#define SYS_ICC_BPR1_EL1		sys_reg(3, 0, 12, 12, 3)
+#define SYS_ICC_CTLR_EL1		sys_reg(3, 0, 12, 12, 4)
+#define SYS_ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
+#define SYS_ICC_GRPEN1_EL1		sys_reg(3, 0, 12, 12, 7)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
@@ -179,6 +190,47 @@
 
 #define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
 
+#define __SYS__AP0Rx_EL2(x)		sys_reg(3, 4, 12, 8, x)
+#define SYS_ICH_AP0R0_EL2		__SYS__AP0Rx_EL2(0)
+#define SYS_ICH_AP0R1_EL2		__SYS__AP0Rx_EL2(1)
+#define SYS_ICH_AP0R2_EL2		__SYS__AP0Rx_EL2(2)
+#define SYS_ICH_AP0R3_EL2		__SYS__AP0Rx_EL2(3)
+
+#define __SYS__AP1Rx_EL2(x)		sys_reg(3, 4, 12, 9, x)
+#define SYS_ICH_AP1R0_EL2		__SYS__AP1Rx_EL2(0)
+#define SYS_ICH_AP1R1_EL2		__SYS__AP1Rx_EL2(1)
+#define SYS_ICH_AP1R2_EL2		__SYS__AP1Rx_EL2(2)
+#define SYS_ICH_AP1R3_EL2		__SYS__AP1Rx_EL2(3)
+
+#define SYS_ICH_VSEIR_EL2		sys_reg(3, 4, 12, 9, 4)
+#define SYS_ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
+#define SYS_ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
+#define SYS_ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
+#define SYS_ICH_MISR_EL2		sys_reg(3, 4, 12, 11, 2)
+#define SYS_ICH_EISR_EL2		sys_reg(3, 4, 12, 11, 3)
+#define SYS_ICH_ELSR_EL2		sys_reg(3, 4, 12, 11, 5)
+#define SYS_ICH_VMCR_EL2		sys_reg(3, 4, 12, 11, 7)
+
+#define __SYS__LR0_EL2(x)		sys_reg(3, 4, 12, 12, x)
+#define SYS_ICH_LR0_EL2			__SYS__LR0_EL2(0)
+#define SYS_ICH_LR1_EL2			__SYS__LR0_EL2(1)
+#define SYS_ICH_LR2_EL2			__SYS__LR0_EL2(2)
+#define SYS_ICH_LR3_EL2			__SYS__LR0_EL2(3)
+#define SYS_ICH_LR4_EL2			__SYS__LR0_EL2(4)
+#define SYS_ICH_LR5_EL2			__SYS__LR0_EL2(5)
+#define SYS_ICH_LR6_EL2			__SYS__LR0_EL2(6)
+#define SYS_ICH_LR7_EL2			__SYS__LR0_EL2(7)
+
+#define __SYS__LR8_EL2(x)		sys_reg(3, 4, 12, 13, x)
+#define SYS_ICH_LR8_EL2			__SYS__LR8_EL2(0)
+#define SYS_ICH_LR9_EL2			__SYS__LR8_EL2(1)
+#define SYS_ICH_LR10_EL2		__SYS__LR8_EL2(2)
+#define SYS_ICH_LR11_EL2		__SYS__LR8_EL2(3)
+#define SYS_ICH_LR12_EL2		__SYS__LR8_EL2(4)
+#define SYS_ICH_LR13_EL2		__SYS__LR8_EL2(5)
+#define SYS_ICH_LR14_EL2		__SYS__LR8_EL2(6)
+#define SYS_ICH_LR15_EL2		__SYS__LR8_EL2(7)
+
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
 #define SCTLR_ELx_I	(1 << 12)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 4fb6ccd..95ae40ac 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -594,14 +594,14 @@ set_hcr:
 	cmp	x0, #1
 	b.ne	3f
 
-	mrs_s	x0, ICC_SRE_EL2
+	mrs_s	x0, SYS_ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
 	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
-	msr_s	ICC_SRE_EL2, x0
+	msr_s	SYS_ICC_SRE_EL2, x0
 	isb					// Make sure SRE is now set
-	mrs_s	x0, ICC_SRE_EL2			// Read SRE back,
+	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
 	tbz	x0, #0, 3f			// and check that it sticks
-	msr_s	ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
+	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
 
 3:
 #endif
-- 
1.9.1

[PATCH 05/15] arm64: sysreg: add physical timer registers

[Mark Rutland]

This patch adds sysreg definitions for system registers used to control
the architected physical timer. Subsequent patches will make use of
these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-6.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 9dc30bc..3e281b1 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -182,6 +182,10 @@
 
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
+#define SYS_CNTP_TVAL_EL0		sys_reg(3, 3, 14, 2, 0)
+#define SYS_CNTP_CTL_EL0		sys_reg(3, 3, 14, 2, 1)
+#define SYS_CNTP_CVAL_EL0		sys_reg(3, 3, 14, 2, 2)
+
 #define __PMEV_op2(n)			((n) & 0x7)
 #define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
 #define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
-- 
1.9.1

[PATCH 05/15] arm64: sysreg: add physical timer registers

[Mark Rutland]

This patch adds sysreg definitions for system registers used to control
the architected physical timer. Subsequent patches will make use of
these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-6.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 9dc30bc..3e281b1 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -182,6 +182,10 @@
 
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
+#define SYS_CNTP_TVAL_EL0		sys_reg(3, 3, 14, 2, 0)
+#define SYS_CNTP_CTL_EL0		sys_reg(3, 3, 14, 2, 1)
+#define SYS_CNTP_CVAL_EL0		sys_reg(3, 3, 14, 2, 2)
+
 #define __PMEV_op2(n)			((n) & 0x7)
 #define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
 #define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
-- 
1.9.1

[PATCH 06/15] arm64: sysreg: add register encodings used by KVM

[Mark Rutland]

This patch adds sysreg definitions for registers which KVM needs the
encodings for, which are not currently describe in <asm/sysregs.h>.
Subsequent patches will make use of these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-6, but
this is not an exhaustive addition. Additions are only made for
registers used today by KVM.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 3e281b1..f623320 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -119,6 +119,7 @@
 #define SYS_ID_PFR0_EL1			sys_reg(3, 0, 0, 1, 0)
 #define SYS_ID_PFR1_EL1			sys_reg(3, 0, 0, 1, 1)
 #define SYS_ID_DFR0_EL1			sys_reg(3, 0, 0, 1, 2)
+#define SYS_ID_AFR0_EL1			sys_reg(3, 0, 0, 1, 3)
 #define SYS_ID_MMFR0_EL1		sys_reg(3, 0, 0, 1, 4)
 #define SYS_ID_MMFR1_EL1		sys_reg(3, 0, 0, 1, 5)
 #define SYS_ID_MMFR2_EL1		sys_reg(3, 0, 0, 1, 6)
@@ -149,11 +150,30 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_SCTLR_EL1			sys_reg(3, 0, 1, 0, 0)
+#define SYS_ACTLR_EL1			sys_reg(3, 0, 1, 0, 1)
+#define SYS_CPACR_EL1			sys_reg(3, 0, 1, 0, 2)
+
+#define SYS_TTBR0_EL1			sys_reg(3, 0, 2, 0, 0)
+#define SYS_TTBR1_EL1			sys_reg(3, 0, 2, 0, 1)
+#define SYS_TCR_EL1			sys_reg(3, 0, 2, 0, 2)
+
 #define SYS_ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
 
+#define SYS_AFSR0_EL1			sys_reg(3, 0, 5, 1, 0)
+#define SYS_AFSR1_EL1			sys_reg(3, 0, 5, 1, 1)
+#define SYS_ESR_EL1			sys_reg(3, 0, 5, 2, 0)
+#define SYS_FAR_EL1			sys_reg(3, 0, 6, 0, 0)
+#define SYS_PAR_EL1			sys_reg(3, 0, 7, 4, 0)
+
 #define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
 #define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
 
+#define SYS_MAIR_EL1			sys_reg(3, 0, 10, 2, 0)
+#define SYS_AMAIR_EL1			sys_reg(3, 0, 10, 3, 0)
+
+#define SYS_VBAR_EL1			sys_reg(3, 0, 12, 0, 0)
+
 #define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
 #define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
 #define SYS_ICC_IAR1_EL1		sys_reg(3, 0, 12, 12, 0)
@@ -163,6 +183,16 @@
 #define SYS_ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
 #define SYS_ICC_GRPEN1_EL1		sys_reg(3, 0, 12, 12, 7)
 
+#define SYS_CONTEXTIDR_EL1		sys_reg(3, 0, 13, 0, 1)
+#define SYS_TPIDR_EL1			sys_reg(3, 0, 13, 0, 4)
+
+#define SYS_CNTKCTL_EL1			sys_reg(3, 0, 14, 1, 0)
+
+#define SYS_CLIDR_EL1			sys_reg(3, 1, 0, 0, 1)
+#define SYS_AIDR_EL1			sys_reg(3, 1, 0, 0, 7)
+
+#define SYS_CSSELR_EL1			sys_reg(3, 2, 0, 0, 0)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
@@ -180,6 +210,9 @@
 #define SYS_PMUSERENR_EL0		sys_reg(3, 3, 9, 14, 0)
 #define SYS_PMOVSSET_EL0		sys_reg(3, 3, 9, 14, 3)
 
+#define SYS_TPIDR_EL0			sys_reg(3, 3, 13, 0, 2)
+#define SYS_TPIDRRO_EL0			sys_reg(3, 3, 13, 0, 3)
+
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
 #define SYS_CNTP_TVAL_EL0		sys_reg(3, 3, 14, 2, 0)
@@ -194,6 +227,10 @@
 
 #define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
 
+#define SYS_DACR32_EL2			sys_reg(3, 4, 3, 0, 0)
+#define SYS_IFSR32_EL2			sys_reg(3, 4, 5, 0, 1)
+#define SYS_FPEXC32_EL2			sys_reg(3, 4, 5, 3, 0)
+
 #define __SYS__AP0Rx_EL2(x)		sys_reg(3, 4, 12, 8, x)
 #define SYS_ICH_AP0R0_EL2		__SYS__AP0Rx_EL2(0)
 #define SYS_ICH_AP0R1_EL2		__SYS__AP0Rx_EL2(1)
-- 
1.9.1

[PATCH 06/15] arm64: sysreg: add register encodings used by KVM

[Mark Rutland]

This patch adds sysreg definitions for registers which KVM needs the
encodings for, which are not currently describe in <asm/sysregs.h>.
Subsequent patches will make use of these definitions.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-6, but
this is not an exhaustive addition. Additions are only made for
registers used today by KVM.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 3e281b1..f623320 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -119,6 +119,7 @@
 #define SYS_ID_PFR0_EL1			sys_reg(3, 0, 0, 1, 0)
 #define SYS_ID_PFR1_EL1			sys_reg(3, 0, 0, 1, 1)
 #define SYS_ID_DFR0_EL1			sys_reg(3, 0, 0, 1, 2)
+#define SYS_ID_AFR0_EL1			sys_reg(3, 0, 0, 1, 3)
 #define SYS_ID_MMFR0_EL1		sys_reg(3, 0, 0, 1, 4)
 #define SYS_ID_MMFR1_EL1		sys_reg(3, 0, 0, 1, 5)
 #define SYS_ID_MMFR2_EL1		sys_reg(3, 0, 0, 1, 6)
@@ -149,11 +150,30 @@
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
 #define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
+#define SYS_SCTLR_EL1			sys_reg(3, 0, 1, 0, 0)
+#define SYS_ACTLR_EL1			sys_reg(3, 0, 1, 0, 1)
+#define SYS_CPACR_EL1			sys_reg(3, 0, 1, 0, 2)
+
+#define SYS_TTBR0_EL1			sys_reg(3, 0, 2, 0, 0)
+#define SYS_TTBR1_EL1			sys_reg(3, 0, 2, 0, 1)
+#define SYS_TCR_EL1			sys_reg(3, 0, 2, 0, 2)
+
 #define SYS_ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
 
+#define SYS_AFSR0_EL1			sys_reg(3, 0, 5, 1, 0)
+#define SYS_AFSR1_EL1			sys_reg(3, 0, 5, 1, 1)
+#define SYS_ESR_EL1			sys_reg(3, 0, 5, 2, 0)
+#define SYS_FAR_EL1			sys_reg(3, 0, 6, 0, 0)
+#define SYS_PAR_EL1			sys_reg(3, 0, 7, 4, 0)
+
 #define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
 #define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
 
+#define SYS_MAIR_EL1			sys_reg(3, 0, 10, 2, 0)
+#define SYS_AMAIR_EL1			sys_reg(3, 0, 10, 3, 0)
+
+#define SYS_VBAR_EL1			sys_reg(3, 0, 12, 0, 0)
+
 #define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
 #define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
 #define SYS_ICC_IAR1_EL1		sys_reg(3, 0, 12, 12, 0)
@@ -163,6 +183,16 @@
 #define SYS_ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
 #define SYS_ICC_GRPEN1_EL1		sys_reg(3, 0, 12, 12, 7)
 
+#define SYS_CONTEXTIDR_EL1		sys_reg(3, 0, 13, 0, 1)
+#define SYS_TPIDR_EL1			sys_reg(3, 0, 13, 0, 4)
+
+#define SYS_CNTKCTL_EL1			sys_reg(3, 0, 14, 1, 0)
+
+#define SYS_CLIDR_EL1			sys_reg(3, 1, 0, 0, 1)
+#define SYS_AIDR_EL1			sys_reg(3, 1, 0, 0, 7)
+
+#define SYS_CSSELR_EL1			sys_reg(3, 2, 0, 0, 0)
+
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
@@ -180,6 +210,9 @@
 #define SYS_PMUSERENR_EL0		sys_reg(3, 3, 9, 14, 0)
 #define SYS_PMOVSSET_EL0		sys_reg(3, 3, 9, 14, 3)
 
+#define SYS_TPIDR_EL0			sys_reg(3, 3, 13, 0, 2)
+#define SYS_TPIDRRO_EL0			sys_reg(3, 3, 13, 0, 3)
+
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
 #define SYS_CNTP_TVAL_EL0		sys_reg(3, 3, 14, 2, 0)
@@ -194,6 +227,10 @@
 
 #define SYS_PMCCFILTR_EL0		sys_reg (3, 3, 14, 15, 7)
 
+#define SYS_DACR32_EL2			sys_reg(3, 4, 3, 0, 0)
+#define SYS_IFSR32_EL2			sys_reg(3, 4, 5, 0, 1)
+#define SYS_FPEXC32_EL2			sys_reg(3, 4, 5, 3, 0)
+
 #define __SYS__AP0Rx_EL2(x)		sys_reg(3, 4, 12, 8, x)
 #define SYS_ICH_AP0R0_EL2		__SYS__AP0Rx_EL2(0)
 #define SYS_ICH_AP0R1_EL2		__SYS__AP0Rx_EL2(1)
-- 
1.9.1

[PATCH 07/15] arm64: sysreg: add Set/Way sys encodings

[Mark Rutland]

Cache maintenance ops fall in the SYS instruction class, and KVM needs
to handle them. So as to keep all SYS encodings in one place, this
patch adds them to sysreg.h.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-2.

To make it clear that these are instructions rather than registers, and
to allow us to change the way these are handled in future, a new
sys_insn() alias for sys_reg() is added and used for these new
definitions.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index f623320..128eae8 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -48,6 +48,8 @@
 	 ((crn) << CRn_shift) | ((crm) << CRm_shift) | \
 	 ((op2) << Op2_shift))
 
+#define sys_insn	sys_reg
+
 #define sys_reg_Op0(id)	(((id) >> Op0_shift) & Op0_mask)
 #define sys_reg_Op1(id)	(((id) >> Op1_shift) & Op1_mask)
 #define sys_reg_CRn(id)	(((id) >> CRn_shift) & CRn_mask)
@@ -89,6 +91,10 @@
 #define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
 				      (!!x)<<8 | 0x1f)
 
+#define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+
 #define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
 #define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
 #define SYS_MDSCR_EL1			sys_reg(2, 0, 0, 2, 2)
-- 
1.9.1

[PATCH 07/15] arm64: sysreg: add Set/Way sys encodings

[Mark Rutland]

Cache maintenance ops fall in the SYS instruction class, and KVM needs
to handle them. So as to keep all SYS encodings in one place, this
patch adds them to sysreg.h.

The encodings were taken from ARM DDI 0487A.k_iss10775, Table C5-2.

To make it clear that these are instructions rather than registers, and
to allow us to change the way these are handled in future, a new
sys_insn() alias for sys_reg() is added and used for these new
definitions.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/sysreg.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index f623320..128eae8 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -48,6 +48,8 @@
 	 ((crn) << CRn_shift) | ((crm) << CRm_shift) | \
 	 ((op2) << Op2_shift))
 
+#define sys_insn	sys_reg
+
 #define sys_reg_Op0(id)	(((id) >> Op0_shift) & Op0_mask)
 #define sys_reg_Op1(id)	(((id) >> Op1_shift) & Op1_mask)
 #define sys_reg_CRn(id)	(((id) >> CRn_shift) & CRn_mask)
@@ -89,6 +91,10 @@
 #define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM |	\
 				      (!!x)<<8 | 0x1f)
 
+#define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+
 #define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
 #define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
 #define SYS_MDSCR_EL1			sys_reg(2, 0, 0, 2, 2)
-- 
1.9.1

[PATCH 08/15] KVM: arm64: add SYS_DESC()

[Mark Rutland]

This patch adds a macro enabling us to initialise sys_reg_desc
structures based on common sysreg encoding definitions in
<asm/sysreg.h>. Subsequent patches will use this to simplify the KVM
code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index 9c6ffd0..66859a5 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -147,4 +147,9 @@ const struct sys_reg_desc *find_reg_by_id(u64 id,
 #define CRm(_x) 	.CRm = _x
 #define Op2(_x) 	.Op2 = _x
 
+#define SYS_DESC(reg)					\
+	Op0(sys_reg_Op0(reg)), Op1(sys_reg_Op1(reg)),	\
+	CRn(sys_reg_CRn(reg)), CRm(sys_reg_CRm(reg)),	\
+	Op2(sys_reg_Op2(reg))
+
 #endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
-- 
1.9.1

[PATCH 08/15] KVM: arm64: add SYS_DESC()

[Mark Rutland]

This patch adds a macro enabling us to initialise sys_reg_desc
structures based on common sysreg encoding definitions in
<asm/sysreg.h>. Subsequent patches will use this to simplify the KVM
code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index 9c6ffd0..66859a5 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -147,4 +147,9 @@ const struct sys_reg_desc *find_reg_by_id(u64 id,
 #define CRm(_x) 	.CRm = _x
 #define Op2(_x) 	.Op2 = _x
 
+#define SYS_DESC(reg)					\
+	Op0(sys_reg_Op0(reg)), Op1(sys_reg_Op1(reg)),	\
+	CRn(sys_reg_CRn(reg)), CRm(sys_reg_CRm(reg)),	\
+	Op2(sys_reg_Op2(reg))
+
 #endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
-- 
1.9.1

[PATCH 09/15] KVM: arm64: Use common debug sysreg definitions

[Mark Rutland]

Now that we have common definitions for the debug register encodings,
make the KVM code use these, simplifying the sys_reg_descs table.

The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1.
This is corrected (as is necessary in order to use the common sysreg
definition).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 73 ++++++++++++++---------------------------------
 1 file changed, 21 insertions(+), 52 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 0e26f8c..5fa23fd 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -793,17 +793,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
-	/* DBGBVRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b100),	\
+	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
 	  trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr },		\
-	/* DBGBCRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b101),	\
+	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
 	  trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr },		\
-	/* DBGWVRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b110),	\
+	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
 	  trap_wvr, reset_wvr, n, 0,  get_wvr, set_wvr },		\
-	/* DBGWCRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b111),	\
+	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
 	  trap_wcr, reset_wcr, n, 0,  get_wcr, set_wcr }
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
@@ -899,12 +895,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 
 	DBG_BCR_BVR_WCR_WVR_EL1(0),
 	DBG_BCR_BVR_WCR_WVR_EL1(1),
-	/* MDCCINT_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
-	  trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
-	/* MDSCR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
-	  trap_debug_regs, reset_val, MDSCR_EL1, 0 },
+	{ SYS_DESC(SYS_MDCCINT_EL1), trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
+	{ SYS_DESC(SYS_MDSCR_EL1), trap_debug_regs, reset_val, MDSCR_EL1, 0 },
 	DBG_BCR_BVR_WCR_WVR_EL1(2),
 	DBG_BCR_BVR_WCR_WVR_EL1(3),
 	DBG_BCR_BVR_WCR_WVR_EL1(4),
@@ -920,44 +912,21 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	DBG_BCR_BVR_WCR_WVR_EL1(14),
 	DBG_BCR_BVR_WCR_WVR_EL1(15),
 
-	/* MDRAR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
-	  trap_raz_wi },
-	/* OSLAR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b100),
-	  trap_raz_wi },
-	/* OSLSR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0001), Op2(0b100),
-	  trap_oslsr_el1 },
-	/* OSDLR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0011), Op2(0b100),
-	  trap_raz_wi },
-	/* DBGPRCR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0100), Op2(0b100),
-	  trap_raz_wi },
-	/* DBGCLAIMSET_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1000), Op2(0b110),
-	  trap_raz_wi },
-	/* DBGCLAIMCLR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1001), Op2(0b110),
-	  trap_raz_wi },
-	/* DBGAUTHSTATUS_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b110),
-	  trap_dbgauthstatus_el1 },
-
-	/* MDCCSR_EL1 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0001), Op2(0b000),
-	  trap_raz_wi },
-	/* DBGDTR_EL0 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0100), Op2(0b000),
-	  trap_raz_wi },
-	/* DBGDTR[TR]X_EL0 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0101), Op2(0b000),
-	  trap_raz_wi },
-
-	/* DBGVCR32_EL2 */
-	{ Op0(0b10), Op1(0b100), CRn(0b0000), CRm(0b0111), Op2(0b000),
-	  NULL, reset_val, DBGVCR32_EL2, 0 },
+	{ SYS_DESC(SYS_MDRAR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_OSLAR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_OSLSR_EL1), trap_oslsr_el1 },
+	{ SYS_DESC(SYS_OSDLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGPRCR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMSET_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMCLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGAUTHSTATUS_EL1), trap_dbgauthstatus_el1 },
+
+	{ SYS_DESC(SYS_MDCCSR_EL0), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGDTR_EL0), trap_raz_wi },
+	// DBGDTR[TR]X_EL0 share the same encoding
+	{ SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi },
+
+	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
 
 	/* MPIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b101),
-- 
1.9.1

[PATCH 09/15] KVM: arm64: Use common debug sysreg definitions

[Mark Rutland]

Now that we have common definitions for the debug register encodings,
make the KVM code use these, simplifying the sys_reg_descs table.

The table previously erroneously referred to MDCCSR_EL0 as MDCCSR_EL1.
This is corrected (as is necessary in order to use the common sysreg
definition).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 73 ++++++++++++++---------------------------------
 1 file changed, 21 insertions(+), 52 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 0e26f8c..5fa23fd 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -793,17 +793,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
-	/* DBGBVRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b100),	\
+	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
 	  trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr },		\
-	/* DBGBCRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b101),	\
+	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
 	  trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr },		\
-	/* DBGWVRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b110),	\
+	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
 	  trap_wvr, reset_wvr, n, 0,  get_wvr, set_wvr },		\
-	/* DBGWCRn_EL1 */						\
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b111),	\
+	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
 	  trap_wcr, reset_wcr, n, 0,  get_wcr, set_wcr }
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
@@ -899,12 +895,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 
 	DBG_BCR_BVR_WCR_WVR_EL1(0),
 	DBG_BCR_BVR_WCR_WVR_EL1(1),
-	/* MDCCINT_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
-	  trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
-	/* MDSCR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
-	  trap_debug_regs, reset_val, MDSCR_EL1, 0 },
+	{ SYS_DESC(SYS_MDCCINT_EL1), trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
+	{ SYS_DESC(SYS_MDSCR_EL1), trap_debug_regs, reset_val, MDSCR_EL1, 0 },
 	DBG_BCR_BVR_WCR_WVR_EL1(2),
 	DBG_BCR_BVR_WCR_WVR_EL1(3),
 	DBG_BCR_BVR_WCR_WVR_EL1(4),
@@ -920,44 +912,21 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	DBG_BCR_BVR_WCR_WVR_EL1(14),
 	DBG_BCR_BVR_WCR_WVR_EL1(15),
 
-	/* MDRAR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
-	  trap_raz_wi },
-	/* OSLAR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b100),
-	  trap_raz_wi },
-	/* OSLSR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0001), Op2(0b100),
-	  trap_oslsr_el1 },
-	/* OSDLR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0011), Op2(0b100),
-	  trap_raz_wi },
-	/* DBGPRCR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0001), CRm(0b0100), Op2(0b100),
-	  trap_raz_wi },
-	/* DBGCLAIMSET_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1000), Op2(0b110),
-	  trap_raz_wi },
-	/* DBGCLAIMCLR_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1001), Op2(0b110),
-	  trap_raz_wi },
-	/* DBGAUTHSTATUS_EL1 */
-	{ Op0(0b10), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b110),
-	  trap_dbgauthstatus_el1 },
-
-	/* MDCCSR_EL1 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0001), Op2(0b000),
-	  trap_raz_wi },
-	/* DBGDTR_EL0 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0100), Op2(0b000),
-	  trap_raz_wi },
-	/* DBGDTR[TR]X_EL0 */
-	{ Op0(0b10), Op1(0b011), CRn(0b0000), CRm(0b0101), Op2(0b000),
-	  trap_raz_wi },
-
-	/* DBGVCR32_EL2 */
-	{ Op0(0b10), Op1(0b100), CRn(0b0000), CRm(0b0111), Op2(0b000),
-	  NULL, reset_val, DBGVCR32_EL2, 0 },
+	{ SYS_DESC(SYS_MDRAR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_OSLAR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_OSLSR_EL1), trap_oslsr_el1 },
+	{ SYS_DESC(SYS_OSDLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGPRCR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMSET_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMCLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGAUTHSTATUS_EL1), trap_dbgauthstatus_el1 },
+
+	{ SYS_DESC(SYS_MDCCSR_EL0), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGDTR_EL0), trap_raz_wi },
+	// DBGDTR[TR]X_EL0 share the same encoding
+	{ SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi },
+
+	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
 
 	/* MPIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b101),
-- 
1.9.1

[PATCH 10/15] KVM: arm64: Use common performance monitor sysreg definitions

[Mark Rutland]

Now that we have common definitions for the performance monitor register
encodings, make the KVM code use these, simplifying the sys_reg_descs
table.

The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these
describe non-obvious details regarding the registers. However, a slight
fixup is applied to bring these into line with the usual comment style.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 78 +++++++++++++----------------------------------
 1 file changed, 22 insertions(+), 56 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 5fa23fd..63b0785 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -804,16 +804,12 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
-	/* PMEVCNTRn_EL0 */						\
-	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
-	  CRm((0b1000 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	{ SYS_DESC(SYS_PMEVCNTRn_EL0(n)),					\
 	  access_pmu_evcntr, reset_unknown, (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
 #define PMU_PMEVTYPER_EL0(n)						\
-	/* PMEVTYPERn_EL0 */						\
-	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
-	  CRm((0b1100 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	{ SYS_DESC(SYS_PMEVTYPERn_EL0(n)),					\
 	  access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
 
 static bool access_cntp_tval(struct kvm_vcpu *vcpu,
@@ -963,12 +959,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b000), CRn(0b0111), CRm(0b0100), Op2(0b000),
 	  NULL, reset_unknown, PAR_EL1 },
 
-	/* PMINTENSET_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
-	  access_pminten, reset_unknown, PMINTENSET_EL1 },
-	/* PMINTENCLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
-	  access_pminten, NULL, PMINTENSET_EL1 },
+	{ SYS_DESC(SYS_PMINTENSET_EL1), access_pminten, reset_unknown, PMINTENSET_EL1 },
+	{ SYS_DESC(SYS_PMINTENCLR_EL1), access_pminten, NULL, PMINTENSET_EL1 },
 
 	/* MAIR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
@@ -1003,48 +995,23 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
 	  NULL, reset_unknown, CSSELR_EL1 },
 
-	/* PMCR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
-	  access_pmcr, reset_pmcr, },
-	/* PMCNTENSET_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
-	  access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
-	/* PMCNTENCLR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
-	  access_pmcnten, NULL, PMCNTENSET_EL0 },
-	/* PMOVSCLR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
-	  access_pmovs, NULL, PMOVSSET_EL0 },
-	/* PMSWINC_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b100),
-	  access_pmswinc, reset_unknown, PMSWINC_EL0 },
-	/* PMSELR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b101),
-	  access_pmselr, reset_unknown, PMSELR_EL0 },
-	/* PMCEID0_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b110),
-	  access_pmceid },
-	/* PMCEID1_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b111),
-	  access_pmceid },
-	/* PMCCNTR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
-	  access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
-	/* PMXEVTYPER_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
-	  access_pmu_evtyper },
-	/* PMXEVCNTR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b010),
-	  access_pmu_evcntr },
-	/* PMUSERENR_EL0
-	 * This register resets as unknown in 64bit mode while it resets as zero
+	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
+	{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
+	{ SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 },
+	{ SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 },
+	{ SYS_DESC(SYS_PMSWINC_EL0), access_pmswinc, reset_unknown, PMSWINC_EL0 },
+	{ SYS_DESC(SYS_PMSELR_EL0), access_pmselr, reset_unknown, PMSELR_EL0 },
+	{ SYS_DESC(SYS_PMCEID0_EL0), access_pmceid },
+	{ SYS_DESC(SYS_PMCEID1_EL0), access_pmceid },
+	{ SYS_DESC(SYS_PMCCNTR_EL0), access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
+	{ SYS_DESC(SYS_PMXEVTYPER_EL0), access_pmu_evtyper },
+	{ SYS_DESC(SYS_PMXEVCNTR_EL0), access_pmu_evcntr },
+	/*
+	 * PMUSERENR_EL0 resets as unknown in 64bit mode while it resets as zero
 	 * in 32bit mode. Here we choose to reset it as zero for consistency.
 	 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b000),
-	  access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
-	/* PMOVSSET_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b011),
-	  access_pmovs, reset_unknown, PMOVSSET_EL0 },
+	{ SYS_DESC(SYS_PMUSERENR_EL0), access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
+	{ SYS_DESC(SYS_PMOVSSET_EL0), access_pmovs, reset_unknown, PMOVSSET_EL0 },
 
 	/* TPIDR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
@@ -1127,12 +1094,11 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	PMU_PMEVTYPER_EL0(28),
 	PMU_PMEVTYPER_EL0(29),
 	PMU_PMEVTYPER_EL0(30),
-	/* PMCCFILTR_EL0
-	 * This register resets as unknown in 64bit mode while it resets as zero
+	/*
+	 * PMCCFILTR_EL0 resets as unknown in 64bit mode while it resets as zero
 	 * in 32bit mode. Here we choose to reset it as zero for consistency.
 	 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b1111), Op2(0b111),
-	  access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
+	{ SYS_DESC(SYS_PMCCFILTR_EL0), access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
 
 	/* DACR32_EL2 */
 	{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
-- 
1.9.1

[PATCH 10/15] KVM: arm64: Use common performance monitor sysreg definitions

[Mark Rutland]

Now that we have common definitions for the performance monitor register
encodings, make the KVM code use these, simplifying the sys_reg_descs
table.

The comments for PMUSERENR_EL0 and PMCCFILTR_EL0 are kept, as these
describe non-obvious details regarding the registers. However, a slight
fixup is applied to bring these into line with the usual comment style.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 78 +++++++++++++----------------------------------
 1 file changed, 22 insertions(+), 56 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 5fa23fd..63b0785 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -804,16 +804,12 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
-	/* PMEVCNTRn_EL0 */						\
-	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
-	  CRm((0b1000 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	{ SYS_DESC(SYS_PMEVCNTRn_EL0(n)),					\
 	  access_pmu_evcntr, reset_unknown, (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
 #define PMU_PMEVTYPER_EL0(n)						\
-	/* PMEVTYPERn_EL0 */						\
-	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
-	  CRm((0b1100 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	{ SYS_DESC(SYS_PMEVTYPERn_EL0(n)),					\
 	  access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
 
 static bool access_cntp_tval(struct kvm_vcpu *vcpu,
@@ -963,12 +959,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b000), CRn(0b0111), CRm(0b0100), Op2(0b000),
 	  NULL, reset_unknown, PAR_EL1 },
 
-	/* PMINTENSET_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
-	  access_pminten, reset_unknown, PMINTENSET_EL1 },
-	/* PMINTENCLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
-	  access_pminten, NULL, PMINTENSET_EL1 },
+	{ SYS_DESC(SYS_PMINTENSET_EL1), access_pminten, reset_unknown, PMINTENSET_EL1 },
+	{ SYS_DESC(SYS_PMINTENCLR_EL1), access_pminten, NULL, PMINTENSET_EL1 },
 
 	/* MAIR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
@@ -1003,48 +995,23 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
 	  NULL, reset_unknown, CSSELR_EL1 },
 
-	/* PMCR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
-	  access_pmcr, reset_pmcr, },
-	/* PMCNTENSET_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
-	  access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
-	/* PMCNTENCLR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
-	  access_pmcnten, NULL, PMCNTENSET_EL0 },
-	/* PMOVSCLR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
-	  access_pmovs, NULL, PMOVSSET_EL0 },
-	/* PMSWINC_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b100),
-	  access_pmswinc, reset_unknown, PMSWINC_EL0 },
-	/* PMSELR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b101),
-	  access_pmselr, reset_unknown, PMSELR_EL0 },
-	/* PMCEID0_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b110),
-	  access_pmceid },
-	/* PMCEID1_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b111),
-	  access_pmceid },
-	/* PMCCNTR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
-	  access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
-	/* PMXEVTYPER_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
-	  access_pmu_evtyper },
-	/* PMXEVCNTR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b010),
-	  access_pmu_evcntr },
-	/* PMUSERENR_EL0
-	 * This register resets as unknown in 64bit mode while it resets as zero
+	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
+	{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
+	{ SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 },
+	{ SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 },
+	{ SYS_DESC(SYS_PMSWINC_EL0), access_pmswinc, reset_unknown, PMSWINC_EL0 },
+	{ SYS_DESC(SYS_PMSELR_EL0), access_pmselr, reset_unknown, PMSELR_EL0 },
+	{ SYS_DESC(SYS_PMCEID0_EL0), access_pmceid },
+	{ SYS_DESC(SYS_PMCEID1_EL0), access_pmceid },
+	{ SYS_DESC(SYS_PMCCNTR_EL0), access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
+	{ SYS_DESC(SYS_PMXEVTYPER_EL0), access_pmu_evtyper },
+	{ SYS_DESC(SYS_PMXEVCNTR_EL0), access_pmu_evcntr },
+	/*
+	 * PMUSERENR_EL0 resets as unknown in 64bit mode while it resets as zero
 	 * in 32bit mode. Here we choose to reset it as zero for consistency.
 	 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b000),
-	  access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
-	/* PMOVSSET_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b011),
-	  access_pmovs, reset_unknown, PMOVSSET_EL0 },
+	{ SYS_DESC(SYS_PMUSERENR_EL0), access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
+	{ SYS_DESC(SYS_PMOVSSET_EL0), access_pmovs, reset_unknown, PMOVSSET_EL0 },
 
 	/* TPIDR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
@@ -1127,12 +1094,11 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	PMU_PMEVTYPER_EL0(28),
 	PMU_PMEVTYPER_EL0(29),
 	PMU_PMEVTYPER_EL0(30),
-	/* PMCCFILTR_EL0
-	 * This register resets as unknown in 64bit mode while it resets as zero
+	/*
+	 * PMCCFILTR_EL0 resets as unknown in 64bit mode while it resets as zero
 	 * in 32bit mode. Here we choose to reset it as zero for consistency.
 	 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b1111), Op2(0b111),
-	  access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
+	{ SYS_DESC(SYS_PMCCFILTR_EL0), access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
 
 	/* DACR32_EL2 */
 	{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
-- 
1.9.1

[PATCH 11/15] KVM: arm64: Use common GICv3 sysreg definitions

[Mark Rutland]

Now that we have common definitions for the GICv3 register encodings,
make the KVM code use these, simplifying the sys_reg_descs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 63b0785..1f3062b 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -973,12 +973,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
 	  NULL, reset_val, VBAR_EL1, 0 },
 
-	/* ICC_SGI1R_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1011), Op2(0b101),
-	  access_gic_sgi },
-	/* ICC_SRE_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
-	  access_gic_sre },
+	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
+	{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
 
 	/* CONTEXTIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
-- 
1.9.1

[PATCH 11/15] KVM: arm64: Use common GICv3 sysreg definitions

[Mark Rutland]

Now that we have common definitions for the GICv3 register encodings,
make the KVM code use these, simplifying the sys_reg_descs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 63b0785..1f3062b 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -973,12 +973,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
 	  NULL, reset_val, VBAR_EL1, 0 },
 
-	/* ICC_SGI1R_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1011), Op2(0b101),
-	  access_gic_sgi },
-	/* ICC_SRE_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
-	  access_gic_sre },
+	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
+	{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
 
 	/* CONTEXTIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
-- 
1.9.1

[PATCH 12/15] KVM: arm64: Use common physical timer sysreg definitions

[Mark Rutland]

Now that we have common definitions for the physical timer control
registers, make the KVM code use these, simplifying the sys_reg_descs
table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 1f3062b..860707f 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1016,15 +1016,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
 	  NULL, reset_unknown, TPIDRRO_EL0 },
 
-	/* CNTP_TVAL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b000),
-	  access_cntp_tval },
-	/* CNTP_CTL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b001),
-	  access_cntp_ctl },
-	/* CNTP_CVAL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b010),
-	  access_cntp_cval },
+	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_cntp_tval },
+	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_cntp_ctl },
+	{ SYS_DESC(SYS_CNTP_CVAL_EL0), access_cntp_cval },
 
 	/* PMEVCNTRn_EL0 */
 	PMU_PMEVCNTR_EL0(0),
-- 
1.9.1

[PATCH 12/15] KVM: arm64: Use common physical timer sysreg definitions

[Mark Rutland]

Now that we have common definitions for the physical timer control
registers, make the KVM code use these, simplifying the sys_reg_descs
table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 1f3062b..860707f 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1016,15 +1016,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
 	  NULL, reset_unknown, TPIDRRO_EL0 },
 
-	/* CNTP_TVAL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b000),
-	  access_cntp_tval },
-	/* CNTP_CTL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b001),
-	  access_cntp_ctl },
-	/* CNTP_CVAL_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b0010), Op2(0b010),
-	  access_cntp_cval },
+	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_cntp_tval },
+	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_cntp_ctl },
+	{ SYS_DESC(SYS_CNTP_CVAL_EL0), access_cntp_cval },
 
 	/* PMEVCNTRn_EL0 */
 	PMU_PMEVCNTR_EL0(0),
-- 
1.9.1

[PATCH 13/15] KVM: arm64: use common invariant sysreg definitions

[Mark Rutland]

Now that we have common definitions for the register encodings used by
KVM, make the KVM code uses thse for invariant sysreg definitions. This
makes said definitions a reasonable amount shorter, especially as many
comments are rendered redundant and can be removed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 57 ++++++++++++++++-------------------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 860707f..e637e1d 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1857,44 +1857,25 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
 
 /* ->val is filled in by kvm_sys_reg_table_init() */
 static struct sys_reg_desc invariant_sys_regs[] = {
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b000),
-	  NULL, get_midr_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b110),
-	  NULL, get_revidr_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b000),
-	  NULL, get_id_pfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b001),
-	  NULL, get_id_pfr1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b010),
-	  NULL, get_id_dfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b011),
-	  NULL, get_id_afr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b100),
-	  NULL, get_id_mmfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b101),
-	  NULL, get_id_mmfr1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b110),
-	  NULL, get_id_mmfr2_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b111),
-	  NULL, get_id_mmfr3_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
-	  NULL, get_id_isar0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b001),
-	  NULL, get_id_isar1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
-	  NULL, get_id_isar2_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b011),
-	  NULL, get_id_isar3_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b100),
-	  NULL, get_id_isar4_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b101),
-	  NULL, get_id_isar5_el1 },
-	{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b001),
-	  NULL, get_clidr_el1 },
-	{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b111),
-	  NULL, get_aidr_el1 },
-	{ Op0(0b11), Op1(0b011), CRn(0b0000), CRm(0b0000), Op2(0b001),
-	  NULL, get_ctr_el0 },
+	{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
+	{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
+	{ SYS_DESC(SYS_ID_PFR0_EL1), NULL, get_id_pfr0_el1 },
+	{ SYS_DESC(SYS_ID_PFR1_EL1), NULL, get_id_pfr1_el1 },
+	{ SYS_DESC(SYS_ID_DFR0_EL1), NULL, get_id_dfr0_el1 },
+	{ SYS_DESC(SYS_ID_AFR0_EL1), NULL, get_id_afr0_el1 },
+	{ SYS_DESC(SYS_ID_MMFR0_EL1), NULL, get_id_mmfr0_el1 },
+	{ SYS_DESC(SYS_ID_MMFR1_EL1), NULL, get_id_mmfr1_el1 },
+	{ SYS_DESC(SYS_ID_MMFR2_EL1), NULL, get_id_mmfr2_el1 },
+	{ SYS_DESC(SYS_ID_MMFR3_EL1), NULL, get_id_mmfr3_el1 },
+	{ SYS_DESC(SYS_ID_ISAR0_EL1), NULL, get_id_isar0_el1 },
+	{ SYS_DESC(SYS_ID_ISAR1_EL1), NULL, get_id_isar1_el1 },
+	{ SYS_DESC(SYS_ID_ISAR2_EL1), NULL, get_id_isar2_el1 },
+	{ SYS_DESC(SYS_ID_ISAR3_EL1), NULL, get_id_isar3_el1 },
+	{ SYS_DESC(SYS_ID_ISAR4_EL1), NULL, get_id_isar4_el1 },
+	{ SYS_DESC(SYS_ID_ISAR5_EL1), NULL, get_id_isar5_el1 },
+	{ SYS_DESC(SYS_CLIDR_EL1), NULL, get_clidr_el1 },
+	{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
+	{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
 };
 
 static int reg_from_user(u64 *val, const void __user *uaddr, u64 id)
-- 
1.9.1

[PATCH 13/15] KVM: arm64: use common invariant sysreg definitions

[Mark Rutland]

Now that we have common definitions for the register encodings used by
KVM, make the KVM code uses thse for invariant sysreg definitions. This
makes said definitions a reasonable amount shorter, especially as many
comments are rendered redundant and can be removed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 57 ++++++++++++++++-------------------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 860707f..e637e1d 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1857,44 +1857,25 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
 
 /* ->val is filled in by kvm_sys_reg_table_init() */
 static struct sys_reg_desc invariant_sys_regs[] = {
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b000),
-	  NULL, get_midr_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b110),
-	  NULL, get_revidr_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b000),
-	  NULL, get_id_pfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b001),
-	  NULL, get_id_pfr1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b010),
-	  NULL, get_id_dfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b011),
-	  NULL, get_id_afr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b100),
-	  NULL, get_id_mmfr0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b101),
-	  NULL, get_id_mmfr1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b110),
-	  NULL, get_id_mmfr2_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0001), Op2(0b111),
-	  NULL, get_id_mmfr3_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b000),
-	  NULL, get_id_isar0_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b001),
-	  NULL, get_id_isar1_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b010),
-	  NULL, get_id_isar2_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b011),
-	  NULL, get_id_isar3_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b100),
-	  NULL, get_id_isar4_el1 },
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0010), Op2(0b101),
-	  NULL, get_id_isar5_el1 },
-	{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b001),
-	  NULL, get_clidr_el1 },
-	{ Op0(0b11), Op1(0b001), CRn(0b0000), CRm(0b0000), Op2(0b111),
-	  NULL, get_aidr_el1 },
-	{ Op0(0b11), Op1(0b011), CRn(0b0000), CRm(0b0000), Op2(0b001),
-	  NULL, get_ctr_el0 },
+	{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
+	{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
+	{ SYS_DESC(SYS_ID_PFR0_EL1), NULL, get_id_pfr0_el1 },
+	{ SYS_DESC(SYS_ID_PFR1_EL1), NULL, get_id_pfr1_el1 },
+	{ SYS_DESC(SYS_ID_DFR0_EL1), NULL, get_id_dfr0_el1 },
+	{ SYS_DESC(SYS_ID_AFR0_EL1), NULL, get_id_afr0_el1 },
+	{ SYS_DESC(SYS_ID_MMFR0_EL1), NULL, get_id_mmfr0_el1 },
+	{ SYS_DESC(SYS_ID_MMFR1_EL1), NULL, get_id_mmfr1_el1 },
+	{ SYS_DESC(SYS_ID_MMFR2_EL1), NULL, get_id_mmfr2_el1 },
+	{ SYS_DESC(SYS_ID_MMFR3_EL1), NULL, get_id_mmfr3_el1 },
+	{ SYS_DESC(SYS_ID_ISAR0_EL1), NULL, get_id_isar0_el1 },
+	{ SYS_DESC(SYS_ID_ISAR1_EL1), NULL, get_id_isar1_el1 },
+	{ SYS_DESC(SYS_ID_ISAR2_EL1), NULL, get_id_isar2_el1 },
+	{ SYS_DESC(SYS_ID_ISAR3_EL1), NULL, get_id_isar3_el1 },
+	{ SYS_DESC(SYS_ID_ISAR4_EL1), NULL, get_id_isar4_el1 },
+	{ SYS_DESC(SYS_ID_ISAR5_EL1), NULL, get_id_isar5_el1 },
+	{ SYS_DESC(SYS_CLIDR_EL1), NULL, get_clidr_el1 },
+	{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
+	{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
 };
 
 static int reg_from_user(u64 *val, const void __user *uaddr, u64 id)
-- 
1.9.1

[PATCH 14/15] KVM: arm64: Use common sysreg definitions

[Mark Rutland]

Now that we have common definitions for the remaining register encodings
required by KVM, make the KVM code use these, simplifying the
sys_reg_descs table and the genericv8_sys_regs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c            | 94 +++++++++---------------------------
 arch/arm64/kvm/sys_regs_generic_v8.c |  4 +-
 2 files changed, 25 insertions(+), 73 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index e637e1d..effa5ce 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -924,72 +924,36 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 
 	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
 
-	/* MPIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b101),
-	  NULL, reset_mpidr, MPIDR_EL1 },
-	/* SCTLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
-	/* CPACR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b010),
-	  NULL, reset_val, CPACR_EL1, 0 },
-	/* TTBR0_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_unknown, TTBR0_EL1 },
-	/* TTBR1_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b001),
-	  access_vm_reg, reset_unknown, TTBR1_EL1 },
-	/* TCR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b010),
-	  access_vm_reg, reset_val, TCR_EL1, 0 },
-
-	/* AFSR0_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b000),
-	  access_vm_reg, reset_unknown, AFSR0_EL1 },
-	/* AFSR1_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b001),
-	  access_vm_reg, reset_unknown, AFSR1_EL1 },
-	/* ESR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0010), Op2(0b000),
-	  access_vm_reg, reset_unknown, ESR_EL1 },
-	/* FAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0110), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_unknown, FAR_EL1 },
-	/* PAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0111), CRm(0b0100), Op2(0b000),
-	  NULL, reset_unknown, PAR_EL1 },
+	{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
+	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
+	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
+	{ SYS_DESC(SYS_TTBR1_EL1), access_vm_reg, reset_unknown, TTBR1_EL1 },
+	{ SYS_DESC(SYS_TCR_EL1), access_vm_reg, reset_val, TCR_EL1, 0 },
+
+	{ SYS_DESC(SYS_AFSR0_EL1), access_vm_reg, reset_unknown, AFSR0_EL1 },
+	{ SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 },
+	{ SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 },
+	{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
+	{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
 
 	{ SYS_DESC(SYS_PMINTENSET_EL1), access_pminten, reset_unknown, PMINTENSET_EL1 },
 	{ SYS_DESC(SYS_PMINTENCLR_EL1), access_pminten, NULL, PMINTENSET_EL1 },
 
-	/* MAIR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
-	  access_vm_reg, reset_unknown, MAIR_EL1 },
-	/* AMAIR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0011), Op2(0b000),
-	  access_vm_reg, reset_amair_el1, AMAIR_EL1 },
+	{ SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 },
+	{ SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 },
 
-	/* VBAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
-	  NULL, reset_val, VBAR_EL1, 0 },
+	{ SYS_DESC(SYS_VBAR_EL1), NULL, reset_val, VBAR_EL1, 0 },
 
 	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
 	{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
 
-	/* CONTEXTIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
-	  access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
-	/* TPIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b100),
-	  NULL, reset_unknown, TPIDR_EL1 },
+	{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
+	{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
 
-	/* CNTKCTL_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1110), CRm(0b0001), Op2(0b000),
-	  NULL, reset_val, CNTKCTL_EL1, 0},
+	{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
 
-	/* CSSELR_EL1 */
-	{ Op0(0b11), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
-	  NULL, reset_unknown, CSSELR_EL1 },
+	{ SYS_DESC(SYS_CSSELR_EL1), NULL, reset_unknown, CSSELR_EL1 },
 
 	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
 	{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
@@ -1009,12 +973,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ SYS_DESC(SYS_PMUSERENR_EL0), access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
 	{ SYS_DESC(SYS_PMOVSSET_EL0), access_pmovs, reset_unknown, PMOVSSET_EL0 },
 
-	/* TPIDR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
-	  NULL, reset_unknown, TPIDR_EL0 },
-	/* TPIDRRO_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
-	  NULL, reset_unknown, TPIDRRO_EL0 },
+	{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
+	{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
 
 	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_cntp_tval },
 	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_cntp_ctl },
@@ -1090,15 +1050,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	 */
 	{ SYS_DESC(SYS_PMCCFILTR_EL0), access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
 
-	/* DACR32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
-	  NULL, reset_unknown, DACR32_EL2 },
-	/* IFSR32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0000), Op2(0b001),
-	  NULL, reset_unknown, IFSR32_EL2 },
-	/* FPEXC32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0011), Op2(0b000),
-	  NULL, reset_val, FPEXC32_EL2, 0x70 },
+	{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
+	{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
+	{ SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x70 },
 };
 
 static bool trap_dbgidr(struct kvm_vcpu *vcpu,
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index 46af718..969ade1 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -52,9 +52,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
  */
 static const struct sys_reg_desc genericv8_sys_regs[] = {
-	/* ACTLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b001),
-	  access_actlr, reset_actlr, ACTLR_EL1 },
+	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 };
 
 static const struct sys_reg_desc genericv8_cp15_regs[] = {
-- 
1.9.1

[PATCH 14/15] KVM: arm64: Use common sysreg definitions

[Mark Rutland]

Now that we have common definitions for the remaining register encodings
required by KVM, make the KVM code use these, simplifying the
sys_reg_descs table and the genericv8_sys_regs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c            | 94 +++++++++---------------------------
 arch/arm64/kvm/sys_regs_generic_v8.c |  4 +-
 2 files changed, 25 insertions(+), 73 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index e637e1d..effa5ce 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -924,72 +924,36 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 
 	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
 
-	/* MPIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0000), CRm(0b0000), Op2(0b101),
-	  NULL, reset_mpidr, MPIDR_EL1 },
-	/* SCTLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
-	/* CPACR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b010),
-	  NULL, reset_val, CPACR_EL1, 0 },
-	/* TTBR0_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_unknown, TTBR0_EL1 },
-	/* TTBR1_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b001),
-	  access_vm_reg, reset_unknown, TTBR1_EL1 },
-	/* TCR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0010), CRm(0b0000), Op2(0b010),
-	  access_vm_reg, reset_val, TCR_EL1, 0 },
-
-	/* AFSR0_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b000),
-	  access_vm_reg, reset_unknown, AFSR0_EL1 },
-	/* AFSR1_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0001), Op2(0b001),
-	  access_vm_reg, reset_unknown, AFSR1_EL1 },
-	/* ESR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0101), CRm(0b0010), Op2(0b000),
-	  access_vm_reg, reset_unknown, ESR_EL1 },
-	/* FAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0110), CRm(0b0000), Op2(0b000),
-	  access_vm_reg, reset_unknown, FAR_EL1 },
-	/* PAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0111), CRm(0b0100), Op2(0b000),
-	  NULL, reset_unknown, PAR_EL1 },
+	{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
+	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
+	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
+	{ SYS_DESC(SYS_TTBR1_EL1), access_vm_reg, reset_unknown, TTBR1_EL1 },
+	{ SYS_DESC(SYS_TCR_EL1), access_vm_reg, reset_val, TCR_EL1, 0 },
+
+	{ SYS_DESC(SYS_AFSR0_EL1), access_vm_reg, reset_unknown, AFSR0_EL1 },
+	{ SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 },
+	{ SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 },
+	{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
+	{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
 
 	{ SYS_DESC(SYS_PMINTENSET_EL1), access_pminten, reset_unknown, PMINTENSET_EL1 },
 	{ SYS_DESC(SYS_PMINTENCLR_EL1), access_pminten, NULL, PMINTENSET_EL1 },
 
-	/* MAIR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
-	  access_vm_reg, reset_unknown, MAIR_EL1 },
-	/* AMAIR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0011), Op2(0b000),
-	  access_vm_reg, reset_amair_el1, AMAIR_EL1 },
+	{ SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 },
+	{ SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 },
 
-	/* VBAR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
-	  NULL, reset_val, VBAR_EL1, 0 },
+	{ SYS_DESC(SYS_VBAR_EL1), NULL, reset_val, VBAR_EL1, 0 },
 
 	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
 	{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
 
-	/* CONTEXTIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
-	  access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
-	/* TPIDR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b100),
-	  NULL, reset_unknown, TPIDR_EL1 },
+	{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
+	{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
 
-	/* CNTKCTL_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b1110), CRm(0b0001), Op2(0b000),
-	  NULL, reset_val, CNTKCTL_EL1, 0},
+	{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
 
-	/* CSSELR_EL1 */
-	{ Op0(0b11), Op1(0b010), CRn(0b0000), CRm(0b0000), Op2(0b000),
-	  NULL, reset_unknown, CSSELR_EL1 },
+	{ SYS_DESC(SYS_CSSELR_EL1), NULL, reset_unknown, CSSELR_EL1 },
 
 	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, },
 	{ SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
@@ -1009,12 +973,8 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	{ SYS_DESC(SYS_PMUSERENR_EL0), access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
 	{ SYS_DESC(SYS_PMOVSSET_EL0), access_pmovs, reset_unknown, PMOVSSET_EL0 },
 
-	/* TPIDR_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
-	  NULL, reset_unknown, TPIDR_EL0 },
-	/* TPIDRRO_EL0 */
-	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
-	  NULL, reset_unknown, TPIDRRO_EL0 },
+	{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
+	{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
 
 	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_cntp_tval },
 	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_cntp_ctl },
@@ -1090,15 +1050,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
 	 */
 	{ SYS_DESC(SYS_PMCCFILTR_EL0), access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
 
-	/* DACR32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
-	  NULL, reset_unknown, DACR32_EL2 },
-	/* IFSR32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0000), Op2(0b001),
-	  NULL, reset_unknown, IFSR32_EL2 },
-	/* FPEXC32_EL2 */
-	{ Op0(0b11), Op1(0b100), CRn(0b0101), CRm(0b0011), Op2(0b000),
-	  NULL, reset_val, FPEXC32_EL2, 0x70 },
+	{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
+	{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
+	{ SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x70 },
 };
 
 static bool trap_dbgidr(struct kvm_vcpu *vcpu,
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index 46af718..969ade1 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -52,9 +52,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
  */
 static const struct sys_reg_desc genericv8_sys_regs[] = {
-	/* ACTLR_EL1 */
-	{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b001),
-	  access_actlr, reset_actlr, ACTLR_EL1 },
+	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 };
 
 static const struct sys_reg_desc genericv8_cp15_regs[] = {
-- 
1.9.1

[PATCH 15/15] KVM: arm64: Use common Set/Way sys definitions

[Mark Rutland]

Now that we have common definitions for the encoding of Set/Way cache
maintenance operations, make the KVM code use these, simplifying the
sys_reg_descs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index effa5ce..0e6c477 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -879,15 +879,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
  * more demanding guest...
  */
 static const struct sys_reg_desc sys_reg_descs[] = {
-	/* DC ISW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b0110), Op2(0b010),
-	  access_dcsw },
-	/* DC CSW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1010), Op2(0b010),
-	  access_dcsw },
-	/* DC CISW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b010),
-	  access_dcsw },
+	{ SYS_DESC(SYS_DC_ISW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CSW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CISW), access_dcsw },
 
 	DBG_BCR_BVR_WCR_WVR_EL1(0),
 	DBG_BCR_BVR_WCR_WVR_EL1(1),
-- 
1.9.1

[PATCH 15/15] KVM: arm64: Use common Set/Way sys definitions

[Mark Rutland]

Now that we have common definitions for the encoding of Set/Way cache
maintenance operations, make the KVM code use these, simplifying the
sys_reg_descs table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm at lists.cs.columbia.edu
---
 arch/arm64/kvm/sys_regs.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index effa5ce..0e6c477 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -879,15 +879,9 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
  * more demanding guest...
  */
 static const struct sys_reg_desc sys_reg_descs[] = {
-	/* DC ISW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b0110), Op2(0b010),
-	  access_dcsw },
-	/* DC CSW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1010), Op2(0b010),
-	  access_dcsw },
-	/* DC CISW */
-	{ Op0(0b01), Op1(0b000), CRn(0b0111), CRm(0b1110), Op2(0b010),
-	  access_dcsw },
+	{ SYS_DESC(SYS_DC_ISW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CSW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CISW), access_dcsw },
 
 	DBG_BCR_BVR_WCR_WVR_EL1(0),
 	DBG_BCR_BVR_WCR_WVR_EL1(1),
-- 
1.9.1

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Marc Zyngier]

On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> Currently we duplicate effort in maintaining system register encodings across
> arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> is unfortunate, and as encodings are encoded in-place without any mnemonic,
> this ends up more painful to read than necessary.
>
> This series ameliorates this by making <asm/sysreg.h> the canonical location
> for (architected) system register encodings, with other users building atop of
> this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
>
> I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> registers for now, but these could be handled similarly. Largely, I've stuck to
> only what KVM needs, though for the debug and perfmon groups it was easier to
> take the whole group from the ARM ARM than to filter them to only what KVM
> needed today.
>
> To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> sys_regs_generic_v8.o on a section-by-section basis before and after the series
> is applied. The .text, .data, and .rodata sections (and most others) are
> identical. The __bug_table section, and some .debug* sections differ, and this
> appears to be due to line numbers changing due to removed lines.
>
> One thing I wasn't sure how to address was banks of registers such as
> PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> for these I've made the macros take an 'n' parameter. It would be nice to be
> consistent either way, and I'm happy to expand those cases.
>
> I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> tag.

I had a quick glance at this series, and this looks like a very good
piece of work - thanks for doing this.

The next question is how do we merge this. Obviously, we can't split it
between trees, and this is very likely to clash with anything that we
will merge on the KVM side (the sysreg table is a popular place).

Will, Catalin: Would it make sense to create a stable branch with these
patches, and merge it into both the arm64 and KVM trees? That'd make
things easier...

Thanks,

	M.
-- 
Jazz is not dead, it just smell funny.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Marc Zyngier]

On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> Currently we duplicate effort in maintaining system register encodings across
> arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> is unfortunate, and as encodings are encoded in-place without any mnemonic,
> this ends up more painful to read than necessary.
>
> This series ameliorates this by making <asm/sysreg.h> the canonical location
> for (architected) system register encodings, with other users building atop of
> this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
>
> I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> registers for now, but these could be handled similarly. Largely, I've stuck to
> only what KVM needs, though for the debug and perfmon groups it was easier to
> take the whole group from the ARM ARM than to filter them to only what KVM
> needed today.
>
> To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> sys_regs_generic_v8.o on a section-by-section basis before and after the series
> is applied. The .text, .data, and .rodata sections (and most others) are
> identical. The __bug_table section, and some .debug* sections differ, and this
> appears to be due to line numbers changing due to removed lines.
>
> One thing I wasn't sure how to address was banks of registers such as
> PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> for these I've made the macros take an 'n' parameter. It would be nice to be
> consistent either way, and I'm happy to expand those cases.
>
> I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> tag.

I had a quick glance at this series, and this looks like a very good
piece of work - thanks for doing this.

The next question is how do we merge this. Obviously, we can't split it
between trees, and this is very likely to clash with anything that we
will merge on the KVM side (the sysreg table is a popular place).

Will, Catalin: Would it make sense to create a stable branch with these
patches, and merge it into both the arm64 and KVM trees? That'd make
things easier...

Thanks,

	M.
-- 
Jazz is not dead, it just smell funny.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Will Deacon]

On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > Currently we duplicate effort in maintaining system register encodings across
> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
> > this ends up more painful to read than necessary.
> >
> > This series ameliorates this by making <asm/sysreg.h> the canonical location
> > for (architected) system register encodings, with other users building atop of
> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
> >
> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> > registers for now, but these could be handled similarly. Largely, I've stuck to
> > only what KVM needs, though for the debug and perfmon groups it was easier to
> > take the whole group from the ARM ARM than to filter them to only what KVM
> > needed today.
> >
> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
> > is applied. The .text, .data, and .rodata sections (and most others) are
> > identical. The __bug_table section, and some .debug* sections differ, and this
> > appears to be due to line numbers changing due to removed lines.
> >
> > One thing I wasn't sure how to address was banks of registers such as
> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> > for these I've made the macros take an 'n' parameter. It would be nice to be
> > consistent either way, and I'm happy to expand those cases.
> >
> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> > tag.
> 
> I had a quick glance at this series, and this looks like a very good
> piece of work - thanks for doing this.
> 
> The next question is how do we merge this. Obviously, we can't split it
> between trees, and this is very likely to clash with anything that we
> will merge on the KVM side (the sysreg table is a popular place).
> 
> Will, Catalin: Would it make sense to create a stable branch with these
> patches, and merge it into both the arm64 and KVM trees? That'd make
> things easier...

I think the scope for conflict on our side is pretty high too, so a shared
branch might be the best way to go. I don't want to branch just yet though,
so I'll probably wait a week or so before setting something in stone.

Will

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Will Deacon]

On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > Currently we duplicate effort in maintaining system register encodings across
> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
> > this ends up more painful to read than necessary.
> >
> > This series ameliorates this by making <asm/sysreg.h> the canonical location
> > for (architected) system register encodings, with other users building atop of
> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
> >
> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> > registers for now, but these could be handled similarly. Largely, I've stuck to
> > only what KVM needs, though for the debug and perfmon groups it was easier to
> > take the whole group from the ARM ARM than to filter them to only what KVM
> > needed today.
> >
> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
> > is applied. The .text, .data, and .rodata sections (and most others) are
> > identical. The __bug_table section, and some .debug* sections differ, and this
> > appears to be due to line numbers changing due to removed lines.
> >
> > One thing I wasn't sure how to address was banks of registers such as
> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> > for these I've made the macros take an 'n' parameter. It would be nice to be
> > consistent either way, and I'm happy to expand those cases.
> >
> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> > tag.
> 
> I had a quick glance at this series, and this looks like a very good
> piece of work - thanks for doing this.
> 
> The next question is how do we merge this. Obviously, we can't split it
> between trees, and this is very likely to clash with anything that we
> will merge on the KVM side (the sysreg table is a popular place).
> 
> Will, Catalin: Would it make sense to create a stable branch with these
> patches, and merge it into both the arm64 and KVM trees? That'd make
> things easier...

I think the scope for conflict on our side is pretty high too, so a shared
branch might be the best way to go. I don't want to branch just yet though,
so I'll probably wait a week or so before setting something in stone.

Will

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > The next question is how do we merge this. Obviously, we can't split it
> > between trees, and this is very likely to clash with anything that we
> > will merge on the KVM side (the sysreg table is a popular place).
> > 
> > Will, Catalin: Would it make sense to create a stable branch with these
> > patches, and merge it into both the arm64 and KVM trees? That'd make
> > things easier...
> 
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Sure thing.

Let me know if you want me to rebase this, otherwise I'll leave my
current branch as-is.

Thanks,
Mark.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > The next question is how do we merge this. Obviously, we can't split it
> > between trees, and this is very likely to clash with anything that we
> > will merge on the KVM side (the sysreg table is a popular place).
> > 
> > Will, Catalin: Would it make sense to create a stable branch with these
> > patches, and merge it into both the arm64 and KVM trees? That'd make
> > things easier...
> 
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Sure thing.

Let me know if you want me to rebase this, otherwise I'll leave my
current branch as-is.

Thanks,
Mark.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Marc Zyngier]

On Fri, Mar 10 2017 at  6:35:55 pm GMT, Will Deacon <will.deacon@arm.com> wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
>> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
>> > Currently we duplicate effort in maintaining system register encodings across
>> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
>> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
>> > this ends up more painful to read than necessary.
>> >
>> > This series ameliorates this by making <asm/sysreg.h> the canonical location
>> > for (architected) system register encodings, with other users building atop of
>> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
>> >
>> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
>> > registers for now, but these could be handled similarly. Largely, I've stuck to
>> > only what KVM needs, though for the debug and perfmon groups it was easier to
>> > take the whole group from the ARM ARM than to filter them to only what KVM
>> > needed today.
>> >
>> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
>> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
>> > is applied. The .text, .data, and .rodata sections (and most others) are
>> > identical. The __bug_table section, and some .debug* sections differ, and this
>> > appears to be due to line numbers changing due to removed lines.
>> >
>> > One thing I wasn't sure how to address was banks of registers such as
>> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
>> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
>> > for these I've made the macros take an 'n' parameter. It would be nice to be
>> > consistent either way, and I'm happy to expand those cases.
>> >
>> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
>> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
>> > tag.
>> 
>> I had a quick glance at this series, and this looks like a very good
>> piece of work - thanks for doing this.
>> 
>> The next question is how do we merge this. Obviously, we can't split it
>> between trees, and this is very likely to clash with anything that we
>> will merge on the KVM side (the sysreg table is a popular place).
>> 
>> Will, Catalin: Would it make sense to create a stable branch with these
>> patches, and merge it into both the arm64 and KVM trees? That'd make
>> things easier...
>
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Yup, that's absolutely fine. We're still mopping the outcome of the
merge window, and I won't queue any 4.12 material before another couple
of weeks. We can always point people to Mark's branch as a base for the
time being.

Thanks,

	M.
-- 
Jazz is not dead, it just smell funny.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Marc Zyngier]

On Fri, Mar 10 2017 at  6:35:55 pm GMT, Will Deacon <will.deacon@arm.com> wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
>> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
>> > Currently we duplicate effort in maintaining system register encodings across
>> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
>> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
>> > this ends up more painful to read than necessary.
>> >
>> > This series ameliorates this by making <asm/sysreg.h> the canonical location
>> > for (architected) system register encodings, with other users building atop of
>> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
>> >
>> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
>> > registers for now, but these could be handled similarly. Largely, I've stuck to
>> > only what KVM needs, though for the debug and perfmon groups it was easier to
>> > take the whole group from the ARM ARM than to filter them to only what KVM
>> > needed today.
>> >
>> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
>> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
>> > is applied. The .text, .data, and .rodata sections (and most others) are
>> > identical. The __bug_table section, and some .debug* sections differ, and this
>> > appears to be due to line numbers changing due to removed lines.
>> >
>> > One thing I wasn't sure how to address was banks of registers such as
>> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
>> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
>> > for these I've made the macros take an 'n' parameter. It would be nice to be
>> > consistent either way, and I'm happy to expand those cases.
>> >
>> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
>> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
>> > tag.
>> 
>> I had a quick glance at this series, and this looks like a very good
>> piece of work - thanks for doing this.
>> 
>> The next question is how do we merge this. Obviously, we can't split it
>> between trees, and this is very likely to clash with anything that we
>> will merge on the KVM side (the sysreg table is a popular place).
>> 
>> Will, Catalin: Would it make sense to create a stable branch with these
>> patches, and merge it into both the arm64 and KVM trees? That'd make
>> things easier...
>
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Yup, that's absolutely fine. We're still mopping the outcome of the
merge window, and I won't queue any 4.12 material before another couple
of weeks. We can always point people to Mark's branch as a base for the
time being.

Thanks,

	M.
-- 
Jazz is not dead, it just smell funny.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

Hi,

On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:

> > The next question is how do we merge this. Obviously, we can't split it
> > between trees, and this is very likely to clash with anything that we
> > will merge on the KVM side (the sysreg table is a popular place).
> > 
> > Will, Catalin: Would it make sense to create a stable branch with these
> > patches, and merge it into both the arm64 and KVM trees? That'd make
> > things easier...
> 
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Any further thoughts on this?

Christoffer has Acked the KVM bits, so if you're happy to do so for the
arm64 bits I can make a stable branch.

Thanks,
Mark.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

Hi,

On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:

> > The next question is how do we merge this. Obviously, we can't split it
> > between trees, and this is very likely to clash with anything that we
> > will merge on the KVM side (the sysreg table is a popular place).
> > 
> > Will, Catalin: Would it make sense to create a stable branch with these
> > patches, and merge it into both the arm64 and KVM trees? That'd make
> > things easier...
> 
> I think the scope for conflict on our side is pretty high too, so a shared
> branch might be the best way to go. I don't want to branch just yet though,
> so I'll probably wait a week or so before setting something in stone.

Any further thoughts on this?

Christoffer has Acked the KVM bits, so if you're happy to do so for the
arm64 bits I can make a stable branch.

Thanks,
Mark.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> 
> > > The next question is how do we merge this. Obviously, we can't split it
> > > between trees, and this is very likely to clash with anything that we
> > > will merge on the KVM side (the sysreg table is a popular place).
> > > 
> > > Will, Catalin: Would it make sense to create a stable branch with these
> > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > things easier...
> > 
> > I think the scope for conflict on our side is pretty high too, so a shared
> > branch might be the best way to go. I don't want to branch just yet though,
> > so I'll probably wait a week or so before setting something in stone.
> 
> Any further thoughts on this?
> 
> Christoffer has Acked the KVM bits, so if you're happy to do so for the
> arm64 bits I can make a stable branch.

Looking around, it doesn't look like there's anything outside of arm64
that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
my changes with Suzuki's changes currently queued in arm64's
for-next/core branch.

I think it would make sense for those to be in a common branch taken by
both the arm64 and KVM trees, with the KVM-specific parts being taken by
KVM alone atop of that.

Would everyone be happy with that?

For reference, I've updated my branches so that arm64/common-sysreg only
contains the common parts, with the KVM parts atop of that in
kvm/common-sysreg.

Thanks,
Mark.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> 
> > > The next question is how do we merge this. Obviously, we can't split it
> > > between trees, and this is very likely to clash with anything that we
> > > will merge on the KVM side (the sysreg table is a popular place).
> > > 
> > > Will, Catalin: Would it make sense to create a stable branch with these
> > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > things easier...
> > 
> > I think the scope for conflict on our side is pretty high too, so a shared
> > branch might be the best way to go. I don't want to branch just yet though,
> > so I'll probably wait a week or so before setting something in stone.
> 
> Any further thoughts on this?
> 
> Christoffer has Acked the KVM bits, so if you're happy to do so for the
> arm64 bits I can make a stable branch.

Looking around, it doesn't look like there's anything outside of arm64
that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
my changes with Suzuki's changes currently queued in arm64's
for-next/core branch.

I think it would make sense for those to be in a common branch taken by
both the arm64 and KVM trees, with the KVM-specific parts being taken by
KVM alone atop of that.

Would everyone be happy with that?

For reference, I've updated my branches so that arm64/common-sysreg only
contains the common parts, with the KVM parts atop of that in
kvm/common-sysreg.

Thanks,
Mark.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Christoffer Dall]

On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > 
> > > > The next question is how do we merge this. Obviously, we can't split it
> > > > between trees, and this is very likely to clash with anything that we
> > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > 
> > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > things easier...
> > > 
> > > I think the scope for conflict on our side is pretty high too, so a shared
> > > branch might be the best way to go. I don't want to branch just yet though,
> > > so I'll probably wait a week or so before setting something in stone.
> > 
> > Any further thoughts on this?
> > 
> > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > arm64 bits I can make a stable branch.
> 
> Looking around, it doesn't look like there's anything outside of arm64
> that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> my changes with Suzuki's changes currently queued in arm64's
> for-next/core branch.
> 
> I think it would make sense for those to be in a common branch taken by
> both the arm64 and KVM trees, with the KVM-specific parts being taken by
> KVM alone atop of that.
> 
> Would everyone be happy with that?

I'm happy with that.

> 
> For reference, I've updated my branches so that arm64/common-sysreg only
> contains the common parts, with the KVM parts atop of that in
> kvm/common-sysreg.
> 

Will, Catalin:  Let me know if you're going to pull from common-sysreg
and I'll do the same and add the kvm patches above.

Thanks for preparing the patches.
-Christoffer

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Christoffer Dall]

On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > 
> > > > The next question is how do we merge this. Obviously, we can't split it
> > > > between trees, and this is very likely to clash with anything that we
> > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > 
> > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > things easier...
> > > 
> > > I think the scope for conflict on our side is pretty high too, so a shared
> > > branch might be the best way to go. I don't want to branch just yet though,
> > > so I'll probably wait a week or so before setting something in stone.
> > 
> > Any further thoughts on this?
> > 
> > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > arm64 bits I can make a stable branch.
> 
> Looking around, it doesn't look like there's anything outside of arm64
> that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> my changes with Suzuki's changes currently queued in arm64's
> for-next/core branch.
> 
> I think it would make sense for those to be in a common branch taken by
> both the arm64 and KVM trees, with the KVM-specific parts being taken by
> KVM alone atop of that.
> 
> Would everyone be happy with that?

I'm happy with that.

> 
> For reference, I've updated my branches so that arm64/common-sysreg only
> contains the common parts, with the KVM parts atop of that in
> kvm/common-sysreg.
> 

Will, Catalin:  Let me know if you're going to pull from common-sysreg
and I'll do the same and add the kvm patches above.

Thanks for preparing the patches.
-Christoffer

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Will Deacon]

On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > > 
> > > > > The next question is how do we merge this. Obviously, we can't split it
> > > > > between trees, and this is very likely to clash with anything that we
> > > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > > 
> > > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > > things easier...
> > > > 
> > > > I think the scope for conflict on our side is pretty high too, so a shared
> > > > branch might be the best way to go. I don't want to branch just yet though,
> > > > so I'll probably wait a week or so before setting something in stone.
> > > 
> > > Any further thoughts on this?
> > > 
> > > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > > arm64 bits I can make a stable branch.
> > 
> > Looking around, it doesn't look like there's anything outside of arm64
> > that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> > my changes with Suzuki's changes currently queued in arm64's
> > for-next/core branch.
> > 
> > I think it would make sense for those to be in a common branch taken by
> > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > KVM alone atop of that.
> > 
> > Would everyone be happy with that?
> 
> I'm happy with that.
> 
> > 
> > For reference, I've updated my branches so that arm64/common-sysreg only
> > contains the common parts, with the KVM parts atop of that in
> > kvm/common-sysreg.
> > 
> 
> Will, Catalin:  Let me know if you're going to pull from common-sysreg
> and I'll do the same and add the kvm patches above.

I think that's what we'll do, but Catalin's out this week (we're taking it
in turns to go to work). I'd say go ahead and pull it into kvm if there
aren't any conflicts. No need to wait for us.

Mark -- those branches are stable, right?

Will

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Will Deacon]

On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > > 
> > > > > The next question is how do we merge this. Obviously, we can't split it
> > > > > between trees, and this is very likely to clash with anything that we
> > > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > > 
> > > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > > things easier...
> > > > 
> > > > I think the scope for conflict on our side is pretty high too, so a shared
> > > > branch might be the best way to go. I don't want to branch just yet though,
> > > > so I'll probably wait a week or so before setting something in stone.
> > > 
> > > Any further thoughts on this?
> > > 
> > > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > > arm64 bits I can make a stable branch.
> > 
> > Looking around, it doesn't look like there's anything outside of arm64
> > that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> > my changes with Suzuki's changes currently queued in arm64's
> > for-next/core branch.
> > 
> > I think it would make sense for those to be in a common branch taken by
> > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > KVM alone atop of that.
> > 
> > Would everyone be happy with that?
> 
> I'm happy with that.
> 
> > 
> > For reference, I've updated my branches so that arm64/common-sysreg only
> > contains the common parts, with the KVM parts atop of that in
> > kvm/common-sysreg.
> > 
> 
> Will, Catalin:  Let me know if you're going to pull from common-sysreg
> and I'll do the same and add the kvm patches above.

I think that's what we'll do, but Catalin's out this week (we're taking it
in turns to go to work). I'd say go ahead and pull it into kvm if there
aren't any conflicts. No need to wait for us.

Mark -- those branches are stable, right?

Will

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Wed, Mar 29, 2017 at 09:41:47AM +0100, Will Deacon wrote:
> On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> > On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:

> > > I think it would make sense for those to be in a common branch taken by
> > > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > > KVM alone atop of that.
> > > 
> > > Would everyone be happy with that?
> > 
> > I'm happy with that.
> > 
> > > For reference, I've updated my branches so that arm64/common-sysreg only
> > > contains the common parts, with the KVM parts atop of that in
> > > kvm/common-sysreg.
> > 
> > Will, Catalin:  Let me know if you're going to pull from common-sysreg
> > and I'll do the same and add the kvm patches above.
> 
> I think that's what we'll do, but Catalin's out this week (we're taking it
> in turns to go to work). I'd say go ahead and pull it into kvm if there
> aren't any conflicts. No need to wait for us.
> 
> Mark -- those branches are stable, right?

They are now. I will not touch either branch.

Thanks,
Mark.

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Mark Rutland]

On Wed, Mar 29, 2017 at 09:41:47AM +0100, Will Deacon wrote:
> On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> > On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:

> > > I think it would make sense for those to be in a common branch taken by
> > > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > > KVM alone atop of that.
> > > 
> > > Would everyone be happy with that?
> > 
> > I'm happy with that.
> > 
> > > For reference, I've updated my branches so that arm64/common-sysreg only
> > > contains the common parts, with the KVM parts atop of that in
> > > kvm/common-sysreg.
> > 
> > Will, Catalin:  Let me know if you're going to pull from common-sysreg
> > and I'll do the same and add the kvm patches above.
> 
> I think that's what we'll do, but Catalin's out this week (we're taking it
> in turns to go to work). I'd say go ahead and pull it into kvm if there
> aren't any conflicts. No need to wait for us.
> 
> Mark -- those branches are stable, right?

They are now. I will not touch either branch.

Thanks,
Mark.

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Catalin Marinas]

On Wed, Mar 29, 2017 at 09:41:47AM +0100, Will Deacon wrote:
> On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> > On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > > > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > > > 
> > > > > > The next question is how do we merge this. Obviously, we can't split it
> > > > > > between trees, and this is very likely to clash with anything that we
> > > > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > > > 
> > > > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > > > things easier...
> > > > > 
> > > > > I think the scope for conflict on our side is pretty high too, so a shared
> > > > > branch might be the best way to go. I don't want to branch just yet though,
> > > > > so I'll probably wait a week or so before setting something in stone.
> > > > 
> > > > Any further thoughts on this?
> > > > 
> > > > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > > > arm64 bits I can make a stable branch.
> > > 
> > > Looking around, it doesn't look like there's anything outside of arm64
> > > that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> > > my changes with Suzuki's changes currently queued in arm64's
> > > for-next/core branch.
> > > 
> > > I think it would make sense for those to be in a common branch taken by
> > > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > > KVM alone atop of that.
> > > 
> > > Would everyone be happy with that?
> > 
> > I'm happy with that.
> > 
> > > 
> > > For reference, I've updated my branches so that arm64/common-sysreg only
> > > contains the common parts, with the KVM parts atop of that in
> > > kvm/common-sysreg.
> > > 
> > 
> > Will, Catalin:  Let me know if you're going to pull from common-sysreg
> > and I'll do the same and add the kvm patches above.
> 
> I think that's what we'll do, but Catalin's out this week (we're taking it
> in turns to go to work). I'd say go ahead and pull it into kvm if there
> aren't any conflicts. No need to wait for us.

I pulled it into the arm64 for-next/core as well (to be pushed out later
today).

-- 
Catalin

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Catalin Marinas]

On Wed, Mar 29, 2017 at 09:41:47AM +0100, Will Deacon wrote:
> On Tue, Mar 28, 2017 at 10:29:31PM +0200, Christoffer Dall wrote:
> > On Tue, Mar 28, 2017 at 07:48:28PM +0100, Mark Rutland wrote:
> > > On Wed, Mar 22, 2017 at 06:35:13PM +0000, Mark Rutland wrote:
> > > > On Fri, Mar 10, 2017 at 06:35:55PM +0000, Will Deacon wrote:
> > > > > On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> > > > 
> > > > > > The next question is how do we merge this. Obviously, we can't split it
> > > > > > between trees, and this is very likely to clash with anything that we
> > > > > > will merge on the KVM side (the sysreg table is a popular place).
> > > > > > 
> > > > > > Will, Catalin: Would it make sense to create a stable branch with these
> > > > > > patches, and merge it into both the arm64 and KVM trees? That'd make
> > > > > > things easier...
> > > > > 
> > > > > I think the scope for conflict on our side is pretty high too, so a shared
> > > > > branch might be the best way to go. I don't want to branch just yet though,
> > > > > so I'll probably wait a week or so before setting something in stone.
> > > > 
> > > > Any further thoughts on this?
> > > > 
> > > > Christoffer has Acked the KVM bits, so if you're happy to do so for the
> > > > arm64 bits I can make a stable branch.
> > > 
> > > Looking around, it doesn't look like there's anything outside of arm64
> > > that'll conflict on the <asm/sysreg.h> changes, and git's happy to merge
> > > my changes with Suzuki's changes currently queued in arm64's
> > > for-next/core branch.
> > > 
> > > I think it would make sense for those to be in a common branch taken by
> > > both the arm64 and KVM trees, with the KVM-specific parts being taken by
> > > KVM alone atop of that.
> > > 
> > > Would everyone be happy with that?
> > 
> > I'm happy with that.
> > 
> > > 
> > > For reference, I've updated my branches so that arm64/common-sysreg only
> > > contains the common parts, with the KVM parts atop of that in
> > > kvm/common-sysreg.
> > > 
> > 
> > Will, Catalin:  Let me know if you're going to pull from common-sysreg
> > and I'll do the same and add the kvm patches above.
> 
> I think that's what we'll do, but Catalin's out this week (we're taking it
> in turns to go to work). I'd say go ahead and pull it into kvm if there
> aren't any conflicts. No need to wait for us.

I pulled it into the arm64 for-next/core as well (to be pushed out later
today).

-- 
Catalin

Re: [PATCH 00/15] arm64/kvm: use common sysreg definitions

[Christoffer Dall]

On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > Currently we duplicate effort in maintaining system register encodings across
> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
> > this ends up more painful to read than necessary.
> >
> > This series ameliorates this by making <asm/sysreg.h> the canonical location
> > for (architected) system register encodings, with other users building atop of
> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
> >
> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> > registers for now, but these could be handled similarly. Largely, I've stuck to
> > only what KVM needs, though for the debug and perfmon groups it was easier to
> > take the whole group from the ARM ARM than to filter them to only what KVM
> > needed today.
> >
> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
> > is applied. The .text, .data, and .rodata sections (and most others) are
> > identical. The __bug_table section, and some .debug* sections differ, and this
> > appears to be due to line numbers changing due to removed lines.
> >
> > One thing I wasn't sure how to address was banks of registers such as
> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> > for these I've made the macros take an 'n' parameter. It would be nice to be
> > consistent either way, and I'm happy to expand those cases.
> >
> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> > tag.
> 
> I had a quick glance at this series, and this looks like a very good
> piece of work - thanks for doing this.

Agreed.  You can add my acked-by on all the KVM patches if you please.

Thanks,
-Christoffer

[PATCH 00/15] arm64/kvm: use common sysreg definitions

[Christoffer Dall]

On Fri, Mar 10, 2017 at 08:17:22AM +0000, Marc Zyngier wrote:
> On Thu, Mar 09 2017 at  5:07:12 pm GMT, Mark Rutland <mark.rutland@arm.com> wrote:
> > Currently we duplicate effort in maintaining system register encodings across
> > arm64's <asm/sysreg.h>, KVM's sysreg tables, and other places. This redundancy
> > is unfortunate, and as encodings are encoded in-place without any mnemonic,
> > this ends up more painful to read than necessary.
> >
> > This series ameliorates this by making <asm/sysreg.h> the canonical location
> > for (architected) system register encodings, with other users building atop of
> > this, e.g. with KVM deriving its sysreg table values from the common mnemonics.
> >
> > I've only attacked AArch64-native SYS encodings, and ignored CP{15,14}
> > registers for now, but these could be handled similarly. Largely, I've stuck to
> > only what KVM needs, though for the debug and perfmon groups it was easier to
> > take the whole group from the ARM ARM than to filter them to only what KVM
> > needed today.
> >
> > To verify that I haven't accidentally broken KVM, I've diffed sys_regs.o and
> > sys_regs_generic_v8.o on a section-by-section basis before and after the series
> > is applied. The .text, .data, and .rodata sections (and most others) are
> > identical. The __bug_table section, and some .debug* sections differ, and this
> > appears to be due to line numbers changing due to removed lines.
> >
> > One thing I wasn't sure how to address was banks of registers such as
> > PMEVCNTR<n>_EL0. We currently enumerate all cases for our GICv3 definitions,
> > but it seemed painful to expand ~30 cases for PMEVCNTR<n>_EL0 and friends, and
> > for these I've made the macros take an 'n' parameter. It would be nice to be
> > consistent either way, and I'm happy to expand those cases.
> >
> > I've pushed thes series out to a branch [1] based on v4.11-rc1. It looks like
> > git rebase is also happy to apply the patches atop of the kvm-arm-for-4.11-rc2
> > tag.
> 
> I had a quick glance at this series, and this looks like a very good
> piece of work - thanks for doing this.

Agreed.  You can add my acked-by on all the KVM patches if you please.

Thanks,
-Christoffer