* [RFC v4 00/19] batman-adv: netlink restructuring, part 2
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
Hi,
Jiri Pirko called the batman-adv configuration interface a while back "a
huge mistake" [1] and suggested genl as alternative. The first
reimplementation [2] (based on the team/devlink design) was rejected. This
second implementation is now using a nl80211-like design. The objects which
can now be modified/queried are:
* mesh/soft-interface (BATADV_CMD_GET_MESH/BATADV_CMD_SET_MESH)
* slave/hard-interface (BATADV_CMD_GET_HARDIF/BATADV_CMD_SET_HARDIF)
* vlan (BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN)
Such a set messages automatically triggers a *_SET_* "reply" via the config
multicast group. The same behavior was also added to the sysfs interface.
I would like to ask the other developers to check whether their
configuration values are represented correctly. And please also check
whether the current implementation might collide with some other features
which you might have in your pipeline.
Unfortunately, Linus Luessing is the only batman-adv developer who provided
feedback.
There were also two topics which were not yet really discussed and thus
these requests (from Linus) were not yet implemented:
* convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
it like a boolean. Instead use it to select how multicast traffic has to
be handled:
- 0: ignore multicast optimization and just flood it like broadcast
traffic
- 1: enabled multicast optimization
- 2: undefined but also some kind of multicast optimization
- 3: undefined but also some kind of multicast of optimization
- ...
* convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
to mark which type of traffic should be aggregated:
- bit 0: enable aggregation of OGM(2)s
- bit 1: yet undefined packet type which allows some kind of aggregation
- bit 2: yet undefined packet type which allows some kind of aggregation
- ...
v4:
===
Incorporate various feedback from
* Linus Luessing:
- Fix typos/spelling/grammar problems:
+ "already allow" -> "already allows"
+ "mesh mesh" -> "mesh"
+ "safed" -> "saved"
- Let batadv_get_softif_from_info actually return net_device instead of
net_device private data (batadv_priv)
- store genl_info_net(info) in temporary variable to avoid line breaks
in function parameters
- document that batadv_get_*_from_info functions increase the reference
counter of the returned object
- directly drop reference counter to hard_dev net_device in
batadv_get_hardif_from_info instead of doing that in batadv_post_doit
- fix NULL pointer deref of primary_if when batadv device doesn't have
any slave device
- rewrite user_ptr[1] flags precheck in batadv_pre_doit to count the
number of set bits (to only allow one of the flags which use
user_ptr[1])
* Jiri Pirko:
- Add _ENABLED Postfix for boolean attributes:
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED
+ BATADV_ATTR_AP_ISOLATION_ENABLED
+ BATADV_ATTR_BONDING_ENABLED
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED
+ BATADV_ATTR_FRAGMENTATION_ENABLED
+ BATADV_ATTR_MULTICAST_MODE_ENABLED
+ BATADV_ATTR_NETWORK_CODING_ENABLED
v3:
===
* correctly assign kernel-doc for BATADV_GW_MODE_CLIENT
* fix validation check for gw.sel_class
* fix setting of BATADV_ATTR_ORIG_INTERVAL
* Cc the (most likely) responsible developers for each setting to more
directly ask them for feedback
v2:
===
* rewrite everything in a more nl80211-like message/attribute format.
Kind regards,
Sven
[1] https://www.open-mesh.org/issues/300
[2] https://patchwork.open-mesh.org/cover/17610/
Sven Eckelmann (19):
batman-adv: Move common genl doit code pre/post hooks
batman-adv: Prepare framework for mesh genl config
batman-adv: Prepare framework for hardif genl config
batman-adv: Prepare framework for vlan genl config
batman-adv: Add aggregated_ogms mesh genl configuration
batman-adv: Add ap_isolation mesh/vlan genl configuration
batman-adv: Add bonding mesh genl configuration
batman-adv: Add bridge_loop_avoidance mesh genl configuration
batman-adv: Add distributed_arp_table mesh genl configuration
batman-adv: Add fragmentation mesh genl configuration
batman-adv: Add gateway mesh genl configuration
batman-adv: Add hop_penalty mesh genl configuration
batman-adv: Add log_level mesh genl configuration
batman-adv: Add multicast_mode mesh genl configuration
batman-adv: Add network_coding mesh genl configuration
batman-adv: Add orig_interval mesh genl configuration
batman-adv: Add elp_interval hardif genl configuration
batman-adv: Add throughput_override hardif genl configuration
batman-adv: Trigger genl notification on sysfs config change
include/uapi/linux/batman_adv.h | 189 +++++-
net/batman-adv/gateway_client.c | 1 -
net/batman-adv/gateway_common.c | 1 +
net/batman-adv/gateway_common.h | 6 -
net/batman-adv/netlink.c | 1080 +++++++++++++++++++++++++++----
net/batman-adv/netlink.h | 6 +
net/batman-adv/soft-interface.c | 2 +-
net/batman-adv/sysfs.c | 64 +-
8 files changed, 1202 insertions(+), 147 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
Hi,
Jiri Pirko called the batman-adv configuration interface a while back "a
huge mistake" [1] and suggested genl as alternative. The first
reimplementation [2] (based on the team/devlink design) was rejected. This
second implementation is now using a nl80211-like design. The objects which
can now be modified/queried are:
* mesh/soft-interface (BATADV_CMD_GET_MESH/BATADV_CMD_SET_MESH)
* slave/hard-interface (BATADV_CMD_GET_HARDIF/BATADV_CMD_SET_HARDIF)
* vlan (BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN)
Such a set messages automatically triggers a *_SET_* "reply" via the config
multicast group. The same behavior was also added to the sysfs interface.
I would like to ask the other developers to check whether their
configuration values are represented correctly. And please also check
whether the current implementation might collide with some other features
which you might have in your pipeline.
Unfortunately, Linus Luessing is the only batman-adv developer who provided
feedback.
There were also two topics which were not yet really discussed and thus
these requests (from Linus) were not yet implemented:
* convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
it like a boolean. Instead use it to select how multicast traffic has to
be handled:
- 0: ignore multicast optimization and just flood it like broadcast
traffic
- 1: enabled multicast optimization
- 2: undefined but also some kind of multicast optimization
- 3: undefined but also some kind of multicast of optimization
- ...
* convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
to mark which type of traffic should be aggregated:
- bit 0: enable aggregation of OGM(2)s
- bit 1: yet undefined packet type which allows some kind of aggregation
- bit 2: yet undefined packet type which allows some kind of aggregation
- ...
v4:
===
Incorporate various feedback from
* Linus Luessing:
- Fix typos/spelling/grammar problems:
+ "already allow" -> "already allows"
+ "mesh mesh" -> "mesh"
+ "safed" -> "saved"
- Let batadv_get_softif_from_info actually return net_device instead of
net_device private data (batadv_priv)
- store genl_info_net(info) in temporary variable to avoid line breaks
in function parameters
- document that batadv_get_*_from_info functions increase the reference
counter of the returned object
- directly drop reference counter to hard_dev net_device in
batadv_get_hardif_from_info instead of doing that in batadv_post_doit
- fix NULL pointer deref of primary_if when batadv device doesn't have
any slave device
- rewrite user_ptr[1] flags precheck in batadv_pre_doit to count the
number of set bits (to only allow one of the flags which use
user_ptr[1])
* Jiri Pirko:
- Add _ENABLED Postfix for boolean attributes:
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED
+ BATADV_ATTR_AP_ISOLATION_ENABLED
+ BATADV_ATTR_BONDING_ENABLED
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED
+ BATADV_ATTR_FRAGMENTATION_ENABLED
+ BATADV_ATTR_MULTICAST_MODE_ENABLED
+ BATADV_ATTR_NETWORK_CODING_ENABLED
v3:
===
* correctly assign kernel-doc for BATADV_GW_MODE_CLIENT
* fix validation check for gw.sel_class
* fix setting of BATADV_ATTR_ORIG_INTERVAL
* Cc the (most likely) responsible developers for each setting to more
directly ask them for feedback
v2:
===
* rewrite everything in a more nl80211-like message/attribute format.
Kind regards,
Sven
[1] https://www.open-mesh.org/issues/300
[2] https://patchwork.open-mesh.org/cover/17610/
Sven Eckelmann (19):
batman-adv: Move common genl doit code pre/post hooks
batman-adv: Prepare framework for mesh genl config
batman-adv: Prepare framework for hardif genl config
batman-adv: Prepare framework for vlan genl config
batman-adv: Add aggregated_ogms mesh genl configuration
batman-adv: Add ap_isolation mesh/vlan genl configuration
batman-adv: Add bonding mesh genl configuration
batman-adv: Add bridge_loop_avoidance mesh genl configuration
batman-adv: Add distributed_arp_table mesh genl configuration
batman-adv: Add fragmentation mesh genl configuration
batman-adv: Add gateway mesh genl configuration
batman-adv: Add hop_penalty mesh genl configuration
batman-adv: Add log_level mesh genl configuration
batman-adv: Add multicast_mode mesh genl configuration
batman-adv: Add network_coding mesh genl configuration
batman-adv: Add orig_interval mesh genl configuration
batman-adv: Add elp_interval hardif genl configuration
batman-adv: Add throughput_override hardif genl configuration
batman-adv: Trigger genl notification on sysfs config change
include/uapi/linux/batman_adv.h | 189 +++++-
net/batman-adv/gateway_client.c | 1 -
net/batman-adv/gateway_common.c | 1 +
net/batman-adv/gateway_common.h | 6 -
net/batman-adv/netlink.c | 1080 +++++++++++++++++++++++++++----
net/batman-adv/netlink.h | 6 +
net/batman-adv/soft-interface.c | 2 +-
net/batman-adv/sysfs.c | 64 +-
8 files changed, 1202 insertions(+), 147 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 53+ messages in thread
* [RFC v4 01/19] batman-adv: Move common genl doit code pre/post hooks
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks")
intoduced a mechanism to run specific code for doit hooks before/after the
hooks are run. Since all doit hooks are requiring the batadv softif, it
should be retrieved/freed in these helpers to simplify the code.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++------------
1 file changed, 100 insertions(+), 43 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 5fe833cc..e56c40d1 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -20,8 +20,10 @@
#include "main.h"
#include <linux/atomic.h>
+#include <linux/bitops.h>
#include <linux/byteorder/generic.h>
#include <linux/cache.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/genetlink.h>
@@ -54,6 +56,8 @@
#include "tp_meter.h"
#include "translation-table.h"
+struct net;
+
struct genl_family batadv_netlink_family;
/* multicast groups */
@@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups {
BATADV_NL_MCGRP_TPMETER,
};
+/**
+ * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags
+ */
+enum batadv_genl_ops_flags {
+ /**
+ * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in
+ * attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be
+ * saved in info->user_ptr[0]
+ */
+ BATADV_FLAG_NEED_MESH = BIT(0),
+};
+
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
};
@@ -329,40 +345,24 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
static int
batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
+ struct batadv_priv *bat_priv = info->user_ptr[0];
struct sk_buff *msg = NULL;
u32 test_length;
void *msg_head;
- int ifindex;
u32 cookie;
u8 *dst;
int ret;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
return -EINVAL;
if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME])
return -EINVAL;
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
-
dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]);
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
- }
-
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
ret = -ENOMEM;
@@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
goto out;
}
- bat_priv = netdev_priv(soft_iface);
batadv_tp_start(bat_priv, dst, test_length, &cookie);
ret = batadv_netlink_tp_meter_put(msg, cookie);
out:
- if (soft_iface)
- dev_put(soft_iface);
-
if (ret) {
if (msg)
nlmsg_free(msg);
@@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
static int
batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
- int ifindex;
+ struct batadv_priv *bat_priv = info->user_ptr[0];
u8 *dst;
int ret = 0;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
return -EINVAL;
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
-
dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
- }
-
- bat_priv = netdev_priv(soft_iface);
batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL);
-out:
- if (soft_iface)
- dev_put(soft_iface);
-
return ret;
}
@@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
return msg->len;
}
+/**
+ * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to soft interface (with increased refcnt) on success, error
+ * pointer on error
+ */
+static struct net_device *
+batadv_get_softif_from_info(struct net *net, struct genl_info *info)
+{
+ struct net_device *soft_iface;
+ int ifindex;
+
+ if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
+ return ERR_PTR(-EINVAL);
+
+ ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
+
+ soft_iface = dev_get_by_index(net, ifindex);
+ if (!soft_iface)
+ return ERR_PTR(-ENODEV);
+
+ if (!batadv_softif_is_valid(soft_iface))
+ goto err_put_softif;
+
+ return soft_iface;
+
+err_put_softif:
+ dev_put(soft_iface);
+
+ return ERR_PTR(-EINVAL);
+}
+
+/**
+ * batadv_pre_doit() - Prepare batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct net *net = genl_info_net(info);
+ struct net_device *soft_iface;
+ struct batadv_priv *bat_priv;
+
+ if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
+ soft_iface = batadv_get_softif_from_info(net, info);
+ if (IS_ERR(soft_iface))
+ return PTR_ERR(soft_iface);
+
+ bat_priv = netdev_priv(soft_iface);
+ info->user_ptr[0] = bat_priv;
+ }
+
+ return 0;
+}
+
+/**
+ * batadv_post_doit() - End batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ */
+static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_priv *bat_priv;
+
+ if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
+ bat_priv = info->user_ptr[0];
+ dev_put(bat_priv->soft_iface);
+ }
+}
+
static const struct genl_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_GET_MESH_INFO,
@@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
.flags = GENL_ADMIN_PERM,
.policy = batadv_netlink_policy,
.doit = batadv_netlink_tp_meter_start,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER_CANCEL,
.flags = GENL_ADMIN_PERM,
.policy = batadv_netlink_policy,
.doit = batadv_netlink_tp_meter_cancel,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
@@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = {
.version = 1,
.maxattr = BATADV_ATTR_MAX,
.netnsok = true,
+ .pre_doit = batadv_pre_doit,
+ .post_doit = batadv_post_doit,
.module = THIS_MODULE,
.ops = batadv_netlink_ops,
.n_ops = ARRAY_SIZE(batadv_netlink_ops),
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 01/19] batman-adv: Move common genl doit code pre/post hooks
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks")
intoduced a mechanism to run specific code for doit hooks before/after the
hooks are run. Since all doit hooks are requiring the batadv softif, it
should be retrieved/freed in these helpers to simplify the code.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++------------
1 file changed, 100 insertions(+), 43 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 5fe833cc..e56c40d1 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -20,8 +20,10 @@
#include "main.h"
#include <linux/atomic.h>
+#include <linux/bitops.h>
#include <linux/byteorder/generic.h>
#include <linux/cache.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/genetlink.h>
@@ -54,6 +56,8 @@
#include "tp_meter.h"
#include "translation-table.h"
+struct net;
+
struct genl_family batadv_netlink_family;
/* multicast groups */
@@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups {
BATADV_NL_MCGRP_TPMETER,
};
+/**
+ * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags
+ */
+enum batadv_genl_ops_flags {
+ /**
+ * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in
+ * attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be
+ * saved in info->user_ptr[0]
+ */
+ BATADV_FLAG_NEED_MESH = BIT(0),
+};
+
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
};
@@ -329,40 +345,24 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
static int
batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
+ struct batadv_priv *bat_priv = info->user_ptr[0];
struct sk_buff *msg = NULL;
u32 test_length;
void *msg_head;
- int ifindex;
u32 cookie;
u8 *dst;
int ret;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
return -EINVAL;
if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME])
return -EINVAL;
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
-
dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]);
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
- }
-
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
ret = -ENOMEM;
@@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
goto out;
}
- bat_priv = netdev_priv(soft_iface);
batadv_tp_start(bat_priv, dst, test_length, &cookie);
ret = batadv_netlink_tp_meter_put(msg, cookie);
out:
- if (soft_iface)
- dev_put(soft_iface);
-
if (ret) {
if (msg)
nlmsg_free(msg);
@@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
static int
batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
- int ifindex;
+ struct batadv_priv *bat_priv = info->user_ptr[0];
u8 *dst;
int ret = 0;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
return -EINVAL;
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
-
dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
- }
-
- bat_priv = netdev_priv(soft_iface);
batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL);
-out:
- if (soft_iface)
- dev_put(soft_iface);
-
return ret;
}
@@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
return msg->len;
}
+/**
+ * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to soft interface (with increased refcnt) on success, error
+ * pointer on error
+ */
+static struct net_device *
+batadv_get_softif_from_info(struct net *net, struct genl_info *info)
+{
+ struct net_device *soft_iface;
+ int ifindex;
+
+ if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
+ return ERR_PTR(-EINVAL);
+
+ ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
+
+ soft_iface = dev_get_by_index(net, ifindex);
+ if (!soft_iface)
+ return ERR_PTR(-ENODEV);
+
+ if (!batadv_softif_is_valid(soft_iface))
+ goto err_put_softif;
+
+ return soft_iface;
+
+err_put_softif:
+ dev_put(soft_iface);
+
+ return ERR_PTR(-EINVAL);
+}
+
+/**
+ * batadv_pre_doit() - Prepare batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct net *net = genl_info_net(info);
+ struct net_device *soft_iface;
+ struct batadv_priv *bat_priv;
+
+ if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
+ soft_iface = batadv_get_softif_from_info(net, info);
+ if (IS_ERR(soft_iface))
+ return PTR_ERR(soft_iface);
+
+ bat_priv = netdev_priv(soft_iface);
+ info->user_ptr[0] = bat_priv;
+ }
+
+ return 0;
+}
+
+/**
+ * batadv_post_doit() - End batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ */
+static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_priv *bat_priv;
+
+ if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
+ bat_priv = info->user_ptr[0];
+ dev_put(bat_priv->soft_iface);
+ }
+}
+
static const struct genl_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_GET_MESH_INFO,
@@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
.flags = GENL_ADMIN_PERM,
.policy = batadv_netlink_policy,
.doit = batadv_netlink_tp_meter_start,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER_CANCEL,
.flags = GENL_ADMIN_PERM,
.policy = batadv_netlink_policy,
.doit = batadv_netlink_tp_meter_cancel,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
@@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = {
.version = 1,
.maxattr = BATADV_ATTR_MAX,
.netnsok = true,
+ .pre_doit = batadv_pre_doit,
+ .post_doit = batadv_post_doit,
.module = THIS_MODULE,
.ops = batadv_netlink_ops,
.n_ops = ARRAY_SIZE(batadv_netlink_ops),
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 02/19] batman-adv: Prepare framework for mesh genl config
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
The main objects for this configuration is the mesh/soft-interface object.
Its actual object in memory already contains most of the available
configuration settings. The genl interface reflects this by allowing to
get/set it using the mesh specific commands.
The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is
reused as get command because it already provides the content of other
information from the mesh/soft-interface which are not yet configuration
specific.
The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 16 +++-
net/batman-adv/netlink.c | 160 +++++++++++++++++++-------------
2 files changed, 111 insertions(+), 65 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a28e76a7..b3394aac 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -27,6 +27,7 @@
#define BATADV_NL_NAME "batadv"
+#define BATADV_NL_MCAST_GROUP_CONFIG "config"
#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
/**
@@ -372,10 +373,14 @@ enum batadv_nl_commands {
BATADV_CMD_UNSPEC,
/**
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
- * device
+ * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
*/
- BATADV_CMD_GET_MESH_INFO,
+ BATADV_CMD_GET_MESH,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+ */
+ BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
/**
* @BATADV_CMD_TP_METER: Start a tp meter session
@@ -443,6 +448,11 @@ enum batadv_nl_commands {
*/
BATADV_CMD_GET_MCAST_FLAGS,
+ /**
+ * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+ */
+ BATADV_CMD_SET_MESH,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e56c40d1..ceec52aa 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family;
/* multicast groups */
enum batadv_netlink_multicast_groups {
+ BATADV_NL_MCGRP_CONFIG,
BATADV_NL_MCGRP_TPMETER,
};
@@ -78,6 +79,7 @@ enum batadv_genl_ops_flags {
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
+ [BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG },
[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
};
@@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
}
/**
- * batadv_netlink_mesh_info_put() - fill in generic information about mesh
- * interface
- * @msg: netlink message to be sent back
- * @soft_iface: interface for which the data should be taken
+ * batadv_netlink_mesh_put() - Fill message with mesh attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
*
- * Return: 0 on success, < 0 on error
+ * Return: 0 on success or negative error number in case of failure
*/
-static int
-batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
+static int batadv_netlink_mesh_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags)
{
- struct batadv_priv *bat_priv = netdev_priv(soft_iface);
+ struct net_device *soft_iface = bat_priv->soft_iface;
struct batadv_hard_iface *primary_if = NULL;
struct net_device *hard_iface;
- int ret = -ENOBUFS;
+ void *hdr;
+
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+ if (!hdr)
+ return -ENOBUFS;
if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) ||
nla_put_string(msg, BATADV_ATTR_ALGO_NAME,
@@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
soft_iface->dev_addr) ||
nla_put_u8(msg, BATADV_ATTR_TT_TTVN,
(u8)atomic_read(&bat_priv->tt.vn)))
- goto out;
+ goto nla_put_failure;
#ifdef CONFIG_BATMAN_ADV_BLA
if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC,
ntohs(bat_priv->bla.claim_dest.group)))
- goto out;
+ goto nla_put_failure;
#endif
if (batadv_mcast_mesh_info_put(msg, bat_priv))
- goto out;
+ goto nla_put_failure;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) {
@@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
hard_iface->name) ||
nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN,
hard_iface->dev_addr))
- goto out;
+ goto nla_put_failure;
}
- ret = 0;
+ if (primary_if)
+ batadv_hardif_put(primary_if);
- out:
+ genlmsg_end(msg, hdr);
+ return 0;
+
+nla_put_failure:
if (primary_if)
batadv_hardif_put(primary_if);
- return ret;
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
/**
- * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO
- * netlink request
- * @skb: received netlink message
- * @info: receiver information
+ * batadv_netlink_notify_mesh() - send softif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success, < 0 on error
*/
-static int
-batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info)
+static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct sk_buff *msg = NULL;
- void *msg_head;
- int ifindex;
+ struct sk_buff *msg;
int ret;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
+ ret = batadv_netlink_mesh_put(msg, bat_priv, BATADV_CMD_SET_MESH,
+ 0, 0, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
}
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
- if (!msg) {
- ret = -ENOMEM;
- goto out;
- }
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
- msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq,
- &batadv_netlink_family, 0,
- BATADV_CMD_GET_MESH_INFO);
- if (!msg_head) {
- ret = -ENOBUFS;
- goto out;
- }
+ return 0;
+}
- ret = batadv_netlink_mesh_info_put(msg, soft_iface);
+/**
+ * batadv_netlink_get_mesh() - Get softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
- out:
- if (soft_iface)
- dev_put(soft_iface);
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
- if (ret) {
- if (msg)
- nlmsg_free(msg);
+ ret = batadv_netlink_mesh_put(msg, bat_priv, BATADV_CMD_GET_MESH,
+ info->snd_portid, info->snd_seq, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
return ret;
}
- genlmsg_end(msg, msg_head);
- return genlmsg_reply(msg, info);
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_mesh() - Set softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return 0;
}
/**
@@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
static const struct genl_ops batadv_netlink_ops[] = {
{
- .cmd = BATADV_CMD_GET_MESH_INFO,
- .flags = GENL_ADMIN_PERM,
+ .cmd = BATADV_CMD_GET_MESH,
+ /* can be retrieved by unprivileged users */
.policy = batadv_netlink_policy,
- .doit = batadv_netlink_get_mesh_info,
+ .doit = batadv_netlink_get_mesh,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER,
@@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
.policy = batadv_netlink_policy,
.dumpit = batadv_mcast_flags_dump,
},
-
+ {
+ .cmd = BATADV_CMD_SET_MESH,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_mesh,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 02/19] batman-adv: Prepare framework for mesh genl config
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
The main objects for this configuration is the mesh/soft-interface object.
Its actual object in memory already contains most of the available
configuration settings. The genl interface reflects this by allowing to
get/set it using the mesh specific commands.
The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is
reused as get command because it already provides the content of other
information from the mesh/soft-interface which are not yet configuration
specific.
The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 16 +++-
net/batman-adv/netlink.c | 160 +++++++++++++++++++-------------
2 files changed, 111 insertions(+), 65 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a28e76a7..b3394aac 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -27,6 +27,7 @@
#define BATADV_NL_NAME "batadv"
+#define BATADV_NL_MCAST_GROUP_CONFIG "config"
#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
/**
@@ -372,10 +373,14 @@ enum batadv_nl_commands {
BATADV_CMD_UNSPEC,
/**
- * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
- * device
+ * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
*/
- BATADV_CMD_GET_MESH_INFO,
+ BATADV_CMD_GET_MESH,
+
+ /**
+ * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+ */
+ BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
/**
* @BATADV_CMD_TP_METER: Start a tp meter session
@@ -443,6 +448,11 @@ enum batadv_nl_commands {
*/
BATADV_CMD_GET_MCAST_FLAGS,
+ /**
+ * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+ */
+ BATADV_CMD_SET_MESH,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e56c40d1..ceec52aa 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -62,6 +62,7 @@ struct genl_family batadv_netlink_family;
/* multicast groups */
enum batadv_netlink_multicast_groups {
+ BATADV_NL_MCGRP_CONFIG,
BATADV_NL_MCGRP_TPMETER,
};
@@ -78,6 +79,7 @@ enum batadv_genl_ops_flags {
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
+ [BATADV_NL_MCGRP_CONFIG] = { .name = BATADV_NL_MCAST_GROUP_CONFIG },
[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
};
@@ -138,20 +140,29 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
}
/**
- * batadv_netlink_mesh_info_put() - fill in generic information about mesh
- * interface
- * @msg: netlink message to be sent back
- * @soft_iface: interface for which the data should be taken
+ * batadv_netlink_mesh_put() - Fill message with mesh attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
*
- * Return: 0 on success, < 0 on error
+ * Return: 0 on success or negative error number in case of failure
*/
-static int
-batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
+static int batadv_netlink_mesh_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags)
{
- struct batadv_priv *bat_priv = netdev_priv(soft_iface);
+ struct net_device *soft_iface = bat_priv->soft_iface;
struct batadv_hard_iface *primary_if = NULL;
struct net_device *hard_iface;
- int ret = -ENOBUFS;
+ void *hdr;
+
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+ if (!hdr)
+ return -ENOBUFS;
if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) ||
nla_put_string(msg, BATADV_ATTR_ALGO_NAME,
@@ -162,16 +173,16 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
soft_iface->dev_addr) ||
nla_put_u8(msg, BATADV_ATTR_TT_TTVN,
(u8)atomic_read(&bat_priv->tt.vn)))
- goto out;
+ goto nla_put_failure;
#ifdef CONFIG_BATMAN_ADV_BLA
if (nla_put_u16(msg, BATADV_ATTR_BLA_CRC,
ntohs(bat_priv->bla.claim_dest.group)))
- goto out;
+ goto nla_put_failure;
#endif
if (batadv_mcast_mesh_info_put(msg, bat_priv))
- goto out;
+ goto nla_put_failure;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) {
@@ -183,77 +194,95 @@ batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
hard_iface->name) ||
nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN,
hard_iface->dev_addr))
- goto out;
+ goto nla_put_failure;
}
- ret = 0;
+ if (primary_if)
+ batadv_hardif_put(primary_if);
- out:
+ genlmsg_end(msg, hdr);
+ return 0;
+
+nla_put_failure:
if (primary_if)
batadv_hardif_put(primary_if);
- return ret;
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
/**
- * batadv_netlink_get_mesh_info() - handle incoming BATADV_CMD_GET_MESH_INFO
- * netlink request
- * @skb: received netlink message
- * @info: receiver information
+ * batadv_netlink_notify_mesh() - send softif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
*
* Return: 0 on success, < 0 on error
*/
-static int
-batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info)
+static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
{
- struct net *net = genl_info_net(info);
- struct net_device *soft_iface;
- struct sk_buff *msg = NULL;
- void *msg_head;
- int ifindex;
+ struct sk_buff *msg;
int ret;
- if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
- return -EINVAL;
-
- ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
- if (!ifindex)
- return -EINVAL;
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
- soft_iface = dev_get_by_index(net, ifindex);
- if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
- ret = -ENODEV;
- goto out;
+ ret = batadv_netlink_mesh_put(msg, bat_priv, BATADV_CMD_SET_MESH,
+ 0, 0, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
}
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
- if (!msg) {
- ret = -ENOMEM;
- goto out;
- }
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
- msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq,
- &batadv_netlink_family, 0,
- BATADV_CMD_GET_MESH_INFO);
- if (!msg_head) {
- ret = -ENOBUFS;
- goto out;
- }
+ return 0;
+}
- ret = batadv_netlink_mesh_info_put(msg, soft_iface);
+/**
+ * batadv_netlink_get_mesh() - Get softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
- out:
- if (soft_iface)
- dev_put(soft_iface);
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
- if (ret) {
- if (msg)
- nlmsg_free(msg);
+ ret = batadv_netlink_mesh_put(msg, bat_priv, BATADV_CMD_GET_MESH,
+ info->snd_portid, info->snd_seq, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
return ret;
}
- genlmsg_end(msg, msg_head);
- return genlmsg_reply(msg, info);
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_mesh() - Set softif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return 0;
}
/**
@@ -600,10 +629,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
static const struct genl_ops batadv_netlink_ops[] = {
{
- .cmd = BATADV_CMD_GET_MESH_INFO,
- .flags = GENL_ADMIN_PERM,
+ .cmd = BATADV_CMD_GET_MESH,
+ /* can be retrieved by unprivileged users */
.policy = batadv_netlink_policy,
- .doit = batadv_netlink_get_mesh_info,
+ .doit = batadv_netlink_get_mesh,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER,
@@ -685,7 +715,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
.policy = batadv_netlink_policy,
.dumpit = batadv_mcast_flags_dump,
},
-
+ {
+ .cmd = BATADV_CMD_SET_MESH,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_mesh,
+ .internal_flags = BATADV_FLAG_NEED_MESH,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 03/19] batman-adv: Prepare framework for hardif genl config
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
Beside the mesh/soft-interface specific configuration, the
slave/hard-interface have B.A.T.M.A.N. V specific configuration settings.
The genl interface reflects this by allowing to get/set it using the
hard-interface specific commands.
The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is
reused as get command because it already allow sto dump the content of
other information from the slave/hard-interface which are not yet
configuration specific.
The set command BATADV_CMD_SET_HARDIF will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF
command message type that settings might have been changed and what the
current values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 16 ++-
net/batman-adv/netlink.c | 240 +++++++++++++++++++++++++++++---
2 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b3394aac..62456a08 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -398,9 +398,15 @@ enum batadv_nl_commands {
BATADV_CMD_GET_ROUTING_ALGOS,
/**
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+ * current softif
*/
- BATADV_CMD_GET_HARDIFS,
+ BATADV_CMD_GET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+ */
+ BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
/**
* @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
@@ -453,6 +459,12 @@ enum batadv_nl_commands {
*/
BATADV_CMD_SET_MESH,
+ /**
+ * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+ * current softif
+ */
+ BATADV_CMD_SET_HARDIF,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index ceec52aa..a58b5ecc 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -21,6 +21,7 @@
#include <linux/atomic.h>
#include <linux/bitops.h>
+#include <linux/bug.h>
#include <linux/byteorder/generic.h>
#include <linux/cache.h>
#include <linux/err.h>
@@ -76,6 +77,13 @@ enum batadv_genl_ops_flags {
* saved in info->user_ptr[0]
*/
BATADV_FLAG_NEED_MESH = BIT(0),
+
+ /**
+ * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in
+ * attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be
+ * saved in info->user_ptr[1]
+ */
+ BATADV_FLAG_NEED_HARDIF = BIT(1),
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
}
/**
- * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message
+ * batadv_netlink_hardif_put() - Fill message with hardif attributes
* @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ * @cmd: type of message to generate
* @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
* @cb: Control block containing additional options
- * @hard_iface: Hard interface to dump
*
- * Return: error code, or 0 on success
+ * Return: 0 on success or negative error number in case of failure
*/
-static int
-batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
- struct netlink_callback *cb,
- struct batadv_hard_iface *hard_iface)
+static int batadv_netlink_hardif_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags,
+ struct netlink_callback *cb)
{
struct net_device *net_dev = hard_iface->net_dev;
void *hdr;
- hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq,
- &batadv_netlink_family, NLM_F_MULTI,
- BATADV_CMD_GET_HARDIFS);
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
if (!hdr)
- return -EMSGSIZE;
+ return -ENOBUFS;
+
+ if (cb)
+ genl_dump_check_consistent(cb, hdr);
- genl_dump_check_consistent(cb, hdr);
+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+ bat_priv->soft_iface->ifindex))
+ goto nla_put_failure;
if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
net_dev->ifindex) ||
@@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
genlmsg_end(msg, hdr);
return 0;
- nla_put_failure:
+nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
/**
- * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages
+ * batadv_netlink_notify_hardif() - send hardif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface)
+{
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_get_hardif() - Get hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_hardif(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_GET_HARDIF,
+ info->snd_portid, info->snd_seq, 0,
+ NULL);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_hardif() - Set hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_hardif(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_dump_hardif() - Dump all hard interface into a messages
* @msg: Netlink message to dump into
* @cb: Parameters from query
*
* Return: error code, or length of reply message on success
*/
static int
-batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
+batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
{
struct net *net = sock_net(cb->skb->sk);
struct net_device *soft_iface;
struct batadv_hard_iface *hard_iface;
+ struct batadv_priv *bat_priv;
int ifindex;
int portid = NETLINK_CB(cb->skb).portid;
int skip = cb->args[0];
@@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
return -ENODEV;
}
+ bat_priv = netdev_priv(soft_iface);
+
rtnl_lock();
cb->seq = batadv_hardif_generation << 1 | 1;
@@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
if (i++ < skip)
continue;
- if (batadv_netlink_dump_hardif_entry(msg, portid, cb,
- hard_iface)) {
+ if (batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_GET_HARDIF,
+ portid, cb->nlh->nlmsg_seq,
+ NLM_F_MULTI, cb)) {
i--;
break;
}
@@ -583,6 +687,52 @@ batadv_get_softif_from_info(struct net *net, struct genl_info *info)
return ERR_PTR(-EINVAL);
}
+/**
+ * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to hard interface (with increased refcnt) on success, error
+ * pointer on error
+ */
+static struct batadv_hard_iface *
+batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface;
+ struct net_device *hard_dev;
+ unsigned int hardif_index;
+
+ if (!info->attrs[BATADV_ATTR_HARD_IFINDEX])
+ return ERR_PTR(-EINVAL);
+
+ hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]);
+
+ hard_dev = dev_get_by_index(net, hardif_index);
+ if (!hard_dev)
+ return ERR_PTR(-ENODEV);
+
+ hard_iface = batadv_hardif_get_by_netdev(hard_dev);
+ if (!hard_iface)
+ goto err_put_harddev;
+
+ if (hard_iface->soft_iface != bat_priv->soft_iface)
+ goto err_put_hardif;
+
+ /* hard_dev is referenced by hard_iface and not needed here */
+ dev_put(hard_dev);
+
+ return hard_iface;
+
+err_put_hardif:
+ batadv_hardif_put(hard_iface);
+err_put_harddev:
+ dev_put(hard_dev);
+
+ return ERR_PTR(-EINVAL);
+}
+
/**
* batadv_pre_doit() - Prepare batman-adv genl doit request
* @ops: requested netlink operation
@@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
struct net *net = genl_info_net(info);
+ struct batadv_hard_iface *hard_iface;
+ struct batadv_priv *bat_priv = NULL;
struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
+ u8 user_ptr1_flags;
+ u8 mesh_dep_flags;
+ int ret;
+
+ user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+ if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
+ return -EINVAL;
+
+ mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+ if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
+ (~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
+ return -EINVAL;
if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
soft_iface = batadv_get_softif_from_info(net, info);
@@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
info->user_ptr[0] = bat_priv;
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) {
+ hard_iface = batadv_get_hardif_from_info(bat_priv, net, info);
+ if (IS_ERR(hard_iface)) {
+ ret = PTR_ERR(hard_iface);
+ goto err_put_softif;
+ }
+
+ info->user_ptr[1] = hard_iface;
+ }
+
return 0;
+
+err_put_softif:
+ if (bat_priv)
+ dev_put(bat_priv->soft_iface);
+
+ return ret;
}
/**
@@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
+ struct batadv_hard_iface *hard_iface;
struct batadv_priv *bat_priv;
+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
+ info->user_ptr[1]) {
+ hard_iface = info->user_ptr[1];
+
+ batadv_hardif_put(hard_iface);
+ }
+
if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
bat_priv = info->user_ptr[0];
dev_put(bat_priv->soft_iface);
@@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
.dumpit = batadv_algo_dump,
},
{
- .cmd = BATADV_CMD_GET_HARDIFS,
- .flags = GENL_ADMIN_PERM,
+ .cmd = BATADV_CMD_GET_HARDIF,
+ /* can be retrieved by unprivileged users */
.policy = batadv_netlink_policy,
- .dumpit = batadv_netlink_dump_hardifs,
+ .dumpit = batadv_netlink_dump_hardif,
+ .doit = batadv_netlink_get_hardif,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_HARDIF,
},
{
.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
@@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
.doit = batadv_netlink_set_mesh,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
+ {
+ .cmd = BATADV_CMD_SET_HARDIF,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_hardif,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_HARDIF,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 03/19] batman-adv: Prepare framework for hardif genl config
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
Beside the mesh/soft-interface specific configuration, the
slave/hard-interface have B.A.T.M.A.N. V specific configuration settings.
The genl interface reflects this by allowing to get/set it using the
hard-interface specific commands.
The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is
reused as get command because it already allow sto dump the content of
other information from the slave/hard-interface which are not yet
configuration specific.
The set command BATADV_CMD_SET_HARDIF will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF
command message type that settings might have been changed and what the
current values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 16 ++-
net/batman-adv/netlink.c | 240 +++++++++++++++++++++++++++++---
2 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b3394aac..62456a08 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -398,9 +398,15 @@ enum batadv_nl_commands {
BATADV_CMD_GET_ROUTING_ALGOS,
/**
- * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+ * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+ * current softif
*/
- BATADV_CMD_GET_HARDIFS,
+ BATADV_CMD_GET_HARDIF,
+
+ /**
+ * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+ */
+ BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
/**
* @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
@@ -453,6 +459,12 @@ enum batadv_nl_commands {
*/
BATADV_CMD_SET_MESH,
+ /**
+ * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+ * current softif
+ */
+ BATADV_CMD_SET_HARDIF,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index ceec52aa..a58b5ecc 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -21,6 +21,7 @@
#include <linux/atomic.h>
#include <linux/bitops.h>
+#include <linux/bug.h>
#include <linux/byteorder/generic.h>
#include <linux/cache.h>
#include <linux/err.h>
@@ -76,6 +77,13 @@ enum batadv_genl_ops_flags {
* saved in info->user_ptr[0]
*/
BATADV_FLAG_NEED_MESH = BIT(0),
+
+ /**
+ * @BATADV_FLAG_NEED_HARDIF: request requires valid hard interface in
+ * attribute BATADV_ATTR_HARD_IFINDEX and expects a pointer to it to be
+ * saved in info->user_ptr[1]
+ */
+ BATADV_FLAG_NEED_HARDIF = BIT(1),
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -446,29 +454,38 @@ batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
}
/**
- * batadv_netlink_dump_hardif_entry() - Dump one hard interface into a message
+ * batadv_netlink_hardif_put() - Fill message with hardif attributes
* @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ * @cmd: type of message to generate
* @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
* @cb: Control block containing additional options
- * @hard_iface: Hard interface to dump
*
- * Return: error code, or 0 on success
+ * Return: 0 on success or negative error number in case of failure
*/
-static int
-batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
- struct netlink_callback *cb,
- struct batadv_hard_iface *hard_iface)
+static int batadv_netlink_hardif_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags,
+ struct netlink_callback *cb)
{
struct net_device *net_dev = hard_iface->net_dev;
void *hdr;
- hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq,
- &batadv_netlink_family, NLM_F_MULTI,
- BATADV_CMD_GET_HARDIFS);
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
if (!hdr)
- return -EMSGSIZE;
+ return -ENOBUFS;
+
+ if (cb)
+ genl_dump_check_consistent(cb, hdr);
- genl_dump_check_consistent(cb, hdr);
+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+ bat_priv->soft_iface->ifindex))
+ goto nla_put_failure;
if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
net_dev->ifindex) ||
@@ -486,24 +503,107 @@ batadv_netlink_dump_hardif_entry(struct sk_buff *msg, u32 portid,
genlmsg_end(msg, hdr);
return 0;
- nla_put_failure:
+nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
/**
- * batadv_netlink_dump_hardifs() - Dump all hard interface into a messages
+ * batadv_netlink_notify_hardif() - send hardif attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @hard_iface: hard interface which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface)
+{
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_SET_HARDIF, 0, 0, 0, NULL);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_get_hardif() - Get hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_hardif(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_GET_HARDIF,
+ info->snd_portid, info->snd_seq, 0,
+ NULL);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_hardif() - Set hardif attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_hardif(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_dump_hardif() - Dump all hard interface into a messages
* @msg: Netlink message to dump into
* @cb: Parameters from query
*
* Return: error code, or length of reply message on success
*/
static int
-batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
+batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
{
struct net *net = sock_net(cb->skb->sk);
struct net_device *soft_iface;
struct batadv_hard_iface *hard_iface;
+ struct batadv_priv *bat_priv;
int ifindex;
int portid = NETLINK_CB(cb->skb).portid;
int skip = cb->args[0];
@@ -523,6 +623,8 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
return -ENODEV;
}
+ bat_priv = netdev_priv(soft_iface);
+
rtnl_lock();
cb->seq = batadv_hardif_generation << 1 | 1;
@@ -533,8 +635,10 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
if (i++ < skip)
continue;
- if (batadv_netlink_dump_hardif_entry(msg, portid, cb,
- hard_iface)) {
+ if (batadv_netlink_hardif_put(msg, bat_priv, hard_iface,
+ BATADV_CMD_GET_HARDIF,
+ portid, cb->nlh->nlmsg_seq,
+ NLM_F_MULTI, cb)) {
i--;
break;
}
@@ -583,6 +687,52 @@ batadv_get_softif_from_info(struct net *net, struct genl_info *info)
return ERR_PTR(-EINVAL);
}
+/**
+ * batadv_get_hardif_from_info() - Retrieve hardif from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to hard interface (with increased refcnt) on success, error
+ * pointer on error
+ */
+static struct batadv_hard_iface *
+batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
+ struct genl_info *info)
+{
+ struct batadv_hard_iface *hard_iface;
+ struct net_device *hard_dev;
+ unsigned int hardif_index;
+
+ if (!info->attrs[BATADV_ATTR_HARD_IFINDEX])
+ return ERR_PTR(-EINVAL);
+
+ hardif_index = nla_get_u32(info->attrs[BATADV_ATTR_HARD_IFINDEX]);
+
+ hard_dev = dev_get_by_index(net, hardif_index);
+ if (!hard_dev)
+ return ERR_PTR(-ENODEV);
+
+ hard_iface = batadv_hardif_get_by_netdev(hard_dev);
+ if (!hard_iface)
+ goto err_put_harddev;
+
+ if (hard_iface->soft_iface != bat_priv->soft_iface)
+ goto err_put_hardif;
+
+ /* hard_dev is referenced by hard_iface and not needed here */
+ dev_put(hard_dev);
+
+ return hard_iface;
+
+err_put_hardif:
+ batadv_hardif_put(hard_iface);
+err_put_harddev:
+ dev_put(hard_dev);
+
+ return ERR_PTR(-EINVAL);
+}
+
/**
* batadv_pre_doit() - Prepare batman-adv genl doit request
* @ops: requested netlink operation
@@ -595,8 +745,21 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
struct net *net = genl_info_net(info);
+ struct batadv_hard_iface *hard_iface;
+ struct batadv_priv *bat_priv = NULL;
struct net_device *soft_iface;
- struct batadv_priv *bat_priv;
+ u8 user_ptr1_flags;
+ u8 mesh_dep_flags;
+ int ret;
+
+ user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+ if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
+ return -EINVAL;
+
+ mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+ if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
+ (~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
+ return -EINVAL;
if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
soft_iface = batadv_get_softif_from_info(net, info);
@@ -607,7 +770,23 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
info->user_ptr[0] = bat_priv;
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF) {
+ hard_iface = batadv_get_hardif_from_info(bat_priv, net, info);
+ if (IS_ERR(hard_iface)) {
+ ret = PTR_ERR(hard_iface);
+ goto err_put_softif;
+ }
+
+ info->user_ptr[1] = hard_iface;
+ }
+
return 0;
+
+err_put_softif:
+ if (bat_priv)
+ dev_put(bat_priv->soft_iface);
+
+ return ret;
}
/**
@@ -619,8 +798,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
+ struct batadv_hard_iface *hard_iface;
struct batadv_priv *bat_priv;
+ if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
+ info->user_ptr[1]) {
+ hard_iface = info->user_ptr[1];
+
+ batadv_hardif_put(hard_iface);
+ }
+
if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
bat_priv = info->user_ptr[0];
dev_put(bat_priv->soft_iface);
@@ -656,10 +843,13 @@ static const struct genl_ops batadv_netlink_ops[] = {
.dumpit = batadv_algo_dump,
},
{
- .cmd = BATADV_CMD_GET_HARDIFS,
- .flags = GENL_ADMIN_PERM,
+ .cmd = BATADV_CMD_GET_HARDIF,
+ /* can be retrieved by unprivileged users */
.policy = batadv_netlink_policy,
- .dumpit = batadv_netlink_dump_hardifs,
+ .dumpit = batadv_netlink_dump_hardif,
+ .doit = batadv_netlink_get_hardif,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_HARDIF,
},
{
.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
@@ -722,6 +912,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
.doit = batadv_netlink_set_mesh,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
+ {
+ .cmd = BATADV_CMD_SET_HARDIF,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_hardif,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_HARDIF,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 04/19] batman-adv: Prepare framework for vlan genl config
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
Beside the mesh/soft-interface specific configuration, the VLANs on top of
the mesh/soft-interface have configuration settings. The genl interface
reflects this by allowing to get/set it using the vlan specific commands
BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN.
The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 17 +++
net/batman-adv/netlink.c | 191 +++++++++++++++++++++++++++++++-
2 files changed, 206 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 62456a08..10f3cc34 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -345,6 +345,11 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_MCAST_FLAGS_PRIV,
+ /**
+ * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+ */
+ BATADV_ATTR_VLANID,
+
/* add attributes above here, update the policy in netlink.c */
/**
@@ -465,6 +470,18 @@ enum batadv_nl_commands {
*/
BATADV_CMD_SET_HARDIF,
+ /**
+ * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+ * current softif
+ */
+ BATADV_CMD_GET_VLAN,
+
+ /**
+ * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+ * current softif
+ */
+ BATADV_CMD_SET_VLAN,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index a58b5ecc..e7a98c67 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -30,6 +30,7 @@
#include <linux/genetlink.h>
#include <linux/gfp.h>
#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -84,6 +85,13 @@ enum batadv_genl_ops_flags {
* saved in info->user_ptr[1]
*/
BATADV_FLAG_NEED_HARDIF = BIT(1),
+
+ /**
+ * @BATADV_FLAG_NEED_VLAN: request requires valid vlan in
+ * attribute BATADV_ATTR_VLANID and expects a pointer to it to be
+ * saved in info->user_ptr[1]
+ */
+ BATADV_FLAG_NEED_VLAN = BIT(2),
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -130,6 +138,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_DAT_CACHE_VID] = { .type = NLA_U16 },
[BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 },
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
+ [BATADV_ATTR_VLANID] = { .type = NLA_U16 },
};
/**
@@ -653,6 +662,123 @@ batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
return msg->len;
}
+/**
+ * batadv_netlink_vlan_put() - Fill message with vlan attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_vlan_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags)
+{
+ void *hdr;
+
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+ if (!hdr)
+ return -ENOBUFS;
+
+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+ bat_priv->soft_iface->ifindex))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+ return 0;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
+}
+
+/**
+ * batadv_netlink_notify_vlan() - send vlan attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan)
+{
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan,
+ BATADV_CMD_SET_VLAN, 0, 0, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_get_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
+ info->snd_portid, info->snd_seq, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_vlan(bat_priv, vlan);
+
+ return 0;
+}
+
/**
* batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
* @net: the applicable net namespace
@@ -733,6 +859,34 @@ batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
return ERR_PTR(-EINVAL);
}
+/**
+ * batadv_get_vlan_from_info() - Retrieve vlan from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to vlan on success (with increased refcnt), error pointer
+ * on error
+ */
+static struct batadv_softif_vlan *
+batadv_get_vlan_from_info(struct batadv_priv *bat_priv, struct net *net,
+ struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan;
+ u16 vid;
+
+ if (!info->attrs[BATADV_ATTR_VLANID])
+ return ERR_PTR(-EINVAL);
+
+ vid = nla_get_u16(info->attrs[BATADV_ATTR_VLANID]);
+
+ vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
+ if (!vlan)
+ return ERR_PTR(-ENOENT);
+
+ return vlan;
+}
+
/**
* batadv_pre_doit() - Prepare batman-adv genl doit request
* @ops: requested netlink operation
@@ -747,16 +901,17 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct net *net = genl_info_net(info);
struct batadv_hard_iface *hard_iface;
struct batadv_priv *bat_priv = NULL;
+ struct batadv_softif_vlan *vlan;
struct net_device *soft_iface;
u8 user_ptr1_flags;
u8 mesh_dep_flags;
int ret;
- user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+ user_ptr1_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
return -EINVAL;
- mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+ mesh_dep_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
(~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
return -EINVAL;
@@ -780,6 +935,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
info->user_ptr[1] = hard_iface;
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_VLAN) {
+ vlan = batadv_get_vlan_from_info(bat_priv, net, info);
+ if (IS_ERR(vlan)) {
+ ret = PTR_ERR(vlan);
+ goto err_put_softif;
+ }
+
+ info->user_ptr[1] = vlan;
+ }
+
return 0;
err_put_softif:
@@ -799,6 +964,7 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
struct batadv_hard_iface *hard_iface;
+ struct batadv_softif_vlan *vlan;
struct batadv_priv *bat_priv;
if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
@@ -808,6 +974,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
batadv_hardif_put(hard_iface);
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_VLAN && info->user_ptr[1]) {
+ vlan = info->user_ptr[1];
+ batadv_softif_vlan_put(vlan);
+ }
+
if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
bat_priv = info->user_ptr[0];
dev_put(bat_priv->soft_iface);
@@ -920,6 +1091,22 @@ static const struct genl_ops batadv_netlink_ops[] = {
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_HARDIF,
},
+ {
+ .cmd = BATADV_CMD_GET_VLAN,
+ /* can be retrieved by unprivileged users */
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_get_vlan,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_VLAN,
+ },
+ {
+ .cmd = BATADV_CMD_SET_VLAN,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_vlan,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_VLAN,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 04/19] batman-adv: Prepare framework for vlan genl config
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The batman-adv configuration interface was implemented solely using sysfs.
This approach was condemned by non-batadv developers as "huge mistake".
Instead a netlink/genl based implementation was suggested.
Beside the mesh/soft-interface specific configuration, the VLANs on top of
the mesh/soft-interface have configuration settings. The genl interface
reflects this by allowing to get/set it using the vlan specific commands
BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN.
The set command BATADV_CMD_SET_MESH will also notify interested userspace
listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command
message type that settings might have been changed and what the current
values are.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
include/uapi/linux/batman_adv.h | 17 +++
net/batman-adv/netlink.c | 191 +++++++++++++++++++++++++++++++-
2 files changed, 206 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 62456a08..10f3cc34 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -345,6 +345,11 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_MCAST_FLAGS_PRIV,
+ /**
+ * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+ */
+ BATADV_ATTR_VLANID,
+
/* add attributes above here, update the policy in netlink.c */
/**
@@ -465,6 +470,18 @@ enum batadv_nl_commands {
*/
BATADV_CMD_SET_HARDIF,
+ /**
+ * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+ * current softif
+ */
+ BATADV_CMD_GET_VLAN,
+
+ /**
+ * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+ * current softif
+ */
+ BATADV_CMD_SET_VLAN,
+
/* add new commands above here */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index a58b5ecc..e7a98c67 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -30,6 +30,7 @@
#include <linux/genetlink.h>
#include <linux/gfp.h>
#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -84,6 +85,13 @@ enum batadv_genl_ops_flags {
* saved in info->user_ptr[1]
*/
BATADV_FLAG_NEED_HARDIF = BIT(1),
+
+ /**
+ * @BATADV_FLAG_NEED_VLAN: request requires valid vlan in
+ * attribute BATADV_ATTR_VLANID and expects a pointer to it to be
+ * saved in info->user_ptr[1]
+ */
+ BATADV_FLAG_NEED_VLAN = BIT(2),
};
static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
@@ -130,6 +138,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_DAT_CACHE_VID] = { .type = NLA_U16 },
[BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 },
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
+ [BATADV_ATTR_VLANID] = { .type = NLA_U16 },
};
/**
@@ -653,6 +662,123 @@ batadv_netlink_dump_hardif(struct sk_buff *msg, struct netlink_callback *cb)
return msg->len;
}
+/**
+ * batadv_netlink_vlan_put() - Fill message with vlan attributes
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ * @cmd: type of message to generate
+ * @portid: Port making netlink request
+ * @seq: sequence number for message
+ * @flags: Additional flags for message
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_vlan_put(struct sk_buff *msg,
+ struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan,
+ enum batadv_nl_commands cmd,
+ u32 portid, u32 seq, int flags)
+{
+ void *hdr;
+
+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
+ if (!hdr)
+ return -ENOBUFS;
+
+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
+ bat_priv->soft_iface->ifindex))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+ return 0;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
+}
+
+/**
+ * batadv_netlink_notify_vlan() - send vlan attributes to listener
+ * @bat_priv: the bat priv with all the soft interface information
+ * @vlan: vlan which was modified
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan)
+{
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan,
+ BATADV_CMD_SET_VLAN, 0, 0, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ genlmsg_multicast_netns(&batadv_netlink_family,
+ dev_net(bat_priv->soft_iface), msg, 0,
+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
+
+ return 0;
+}
+
+/**
+ * batadv_netlink_get_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct sk_buff *msg;
+ int ret;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
+ info->snd_portid, info->snd_seq, 0);
+ if (ret < 0) {
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ ret = genlmsg_reply(msg, info);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_set_vlan() - Get vlan attributes
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
+ struct batadv_priv *bat_priv = info->user_ptr[0];
+
+ batadv_netlink_notify_vlan(bat_priv, vlan);
+
+ return 0;
+}
+
/**
* batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
* @net: the applicable net namespace
@@ -733,6 +859,34 @@ batadv_get_hardif_from_info(struct batadv_priv *bat_priv, struct net *net,
return ERR_PTR(-EINVAL);
}
+/**
+ * batadv_get_vlan_from_info() - Retrieve vlan from genl attributes
+ * @bat_priv: the bat priv with all the soft interface information
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to vlan on success (with increased refcnt), error pointer
+ * on error
+ */
+static struct batadv_softif_vlan *
+batadv_get_vlan_from_info(struct batadv_priv *bat_priv, struct net *net,
+ struct genl_info *info)
+{
+ struct batadv_softif_vlan *vlan;
+ u16 vid;
+
+ if (!info->attrs[BATADV_ATTR_VLANID])
+ return ERR_PTR(-EINVAL);
+
+ vid = nla_get_u16(info->attrs[BATADV_ATTR_VLANID]);
+
+ vlan = batadv_softif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG);
+ if (!vlan)
+ return ERR_PTR(-ENOENT);
+
+ return vlan;
+}
+
/**
* batadv_pre_doit() - Prepare batman-adv genl doit request
* @ops: requested netlink operation
@@ -747,16 +901,17 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct net *net = genl_info_net(info);
struct batadv_hard_iface *hard_iface;
struct batadv_priv *bat_priv = NULL;
+ struct batadv_softif_vlan *vlan;
struct net_device *soft_iface;
u8 user_ptr1_flags;
u8 mesh_dep_flags;
int ret;
- user_ptr1_flags = BATADV_FLAG_NEED_HARDIF;
+ user_ptr1_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
if (WARN_ON(hweight8(ops->internal_flags & user_ptr1_flags) > 1))
return -EINVAL;
- mesh_dep_flags = BATADV_FLAG_NEED_HARDIF;
+ mesh_dep_flags = BATADV_FLAG_NEED_HARDIF | BATADV_FLAG_NEED_VLAN;
if (WARN_ON((ops->internal_flags & mesh_dep_flags) &&
(~ops->internal_flags & BATADV_FLAG_NEED_MESH)))
return -EINVAL;
@@ -780,6 +935,16 @@ static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
info->user_ptr[1] = hard_iface;
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_VLAN) {
+ vlan = batadv_get_vlan_from_info(bat_priv, net, info);
+ if (IS_ERR(vlan)) {
+ ret = PTR_ERR(vlan);
+ goto err_put_softif;
+ }
+
+ info->user_ptr[1] = vlan;
+ }
+
return 0;
err_put_softif:
@@ -799,6 +964,7 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info)
{
struct batadv_hard_iface *hard_iface;
+ struct batadv_softif_vlan *vlan;
struct batadv_priv *bat_priv;
if (ops->internal_flags & BATADV_FLAG_NEED_HARDIF &&
@@ -808,6 +974,11 @@ static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
batadv_hardif_put(hard_iface);
}
+ if (ops->internal_flags & BATADV_FLAG_NEED_VLAN && info->user_ptr[1]) {
+ vlan = info->user_ptr[1];
+ batadv_softif_vlan_put(vlan);
+ }
+
if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
bat_priv = info->user_ptr[0];
dev_put(bat_priv->soft_iface);
@@ -920,6 +1091,22 @@ static const struct genl_ops batadv_netlink_ops[] = {
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_HARDIF,
},
+ {
+ .cmd = BATADV_CMD_GET_VLAN,
+ /* can be retrieved by unprivileged users */
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_get_vlan,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_VLAN,
+ },
+ {
+ .cmd = BATADV_CMD_SET_VLAN,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_set_vlan,
+ .internal_flags = BATADV_FLAG_NEED_MESH |
+ BATADV_FLAG_NEED_VLAN,
+ },
};
struct genl_family batadv_netlink_family __ro_after_init = {
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 05/19] batman-adv: Add aggregated_ogms mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
The mesh interface can delay OGM messages to aggregate different ogms
together in a single OGM packet.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 18 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 10f3cc34..f8941e80 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -350,6 +350,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_VLANID,
+ /**
+ * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+ * messages of the mesh interface shall be aggregated or not.
+ */
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e7a98c67..dabb3af5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 },
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
[BATADV_ATTR_VLANID] = { .type = NLA_U16 },
+ [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -214,6 +215,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
}
+ if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+ !!atomic_read(&bat_priv->aggregated_ogms)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED];
+
+ atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
+ }
batadv_netlink_notify_mesh(bat_priv);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 05/19] batman-adv: Add aggregated_ogms mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
The mesh interface can delay OGM messages to aggregate different ogms
together in a single OGM packet.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 18 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 10f3cc34..f8941e80 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -350,6 +350,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_VLANID,
+ /**
+ * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+ * messages of the mesh interface shall be aggregated or not.
+ */
+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index e7a98c67..dabb3af5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MCAST_FLAGS] = { .type = NLA_U32 },
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
[BATADV_ATTR_VLANID] = { .type = NLA_U16 },
+ [BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -214,6 +215,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
}
+ if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+ !!atomic_read(&bat_priv->aggregated_ogms)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED];
+
+ atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
+ }
batadv_netlink_notify_mesh(bat_priv);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 06/19] batman-adv: Add ap_isolation mesh/vlan genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The mesh interface can drop messages between clients to implement a
mesh-wide AP isolation.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and
BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
This feature also requires that skbuff which should be handled as isolated
are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to
set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK
and BATADV_ATTR_ISOLATION_MASK.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 19 +++++++
net/batman-adv/netlink.c | 89 +++++++++++++++++++++++++++++++++
2 files changed, 108 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f8941e80..a4dadafe 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -356,6 +356,25 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+ /**
+ * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+ * from a wireless client to another wireless client will be silently
+ * dropped.
+ */
+ BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MARK,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MASK,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index dabb3af5..df003c65 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
[BATADV_ATTR_VLANID] = { .type = NLA_U16 },
[BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
+ [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
};
/**
@@ -157,6 +160,52 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
return attr ? nla_get_u32(attr) : 0;
}
+/**
+ * batadv_netlink_mesh_put_ap_isolation() - Add ap_isolation softif attribute
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_mesh_put_ap_isolation(struct sk_buff *msg,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+ u8 ap_isolation;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return 0;
+
+ ap_isolation = atomic_read(&vlan->ap_isolation);
+ batadv_softif_vlan_put(vlan);
+
+ return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+ !!ap_isolation);
+}
+
+/**
+ * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg
+ * @attr: parsed BATADV_ATTR_AP_ISOLATION_ENABLED attribute
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return -ENOENT;
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ batadv_softif_vlan_put(vlan);
+
+ return 0;
+}
+
/**
* batadv_netlink_mesh_put() - Fill message with mesh attributes
* @msg: Netlink message to dump into
@@ -219,6 +268,17 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->aggregated_ogms)))
goto nla_put_failure;
+ if (batadv_netlink_mesh_put_ap_isolation(msg, bat_priv))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK,
+ bat_priv->isolation_mark))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK,
+ bat_priv->isolation_mark_mask))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -309,6 +369,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
}
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+ batadv_netlink_set_mesh_ap_isolation(attr, bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MARK];
+
+ bat_priv->isolation_mark = nla_get_u32(attr);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MASK];
+
+ bat_priv->isolation_mark_mask = nla_get_u32(attr);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
@@ -705,6 +783,10 @@ static int batadv_netlink_vlan_put(struct sk_buff *msg,
if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
goto nla_put_failure;
+ if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+ !!atomic_read(&vlan->ap_isolation)))
+ goto nla_put_failure;
+
genlmsg_end(msg, hdr);
return 0;
@@ -785,6 +867,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
{
struct batadv_softif_vlan *vlan = info->user_ptr[1];
struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ }
batadv_netlink_notify_vlan(bat_priv, vlan);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 06/19] batman-adv: Add ap_isolation mesh/vlan genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The mesh interface can drop messages between clients to implement a
mesh-wide AP isolation.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and
BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
This feature also requires that skbuff which should be handled as isolated
are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to
set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK
and BATADV_ATTR_ISOLATION_MASK.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 19 +++++++
net/batman-adv/netlink.c | 89 +++++++++++++++++++++++++++++++++
2 files changed, 108 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f8941e80..a4dadafe 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -356,6 +356,25 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+ /**
+ * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+ * from a wireless client to another wireless client will be silently
+ * dropped.
+ */
+ BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MARK,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MASK,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index dabb3af5..df003c65 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
[BATADV_ATTR_VLANID] = { .type = NLA_U16 },
[BATADV_ATTR_AGGREGATED_OGMS_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
+ [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
};
/**
@@ -157,6 +160,52 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
return attr ? nla_get_u32(attr) : 0;
}
+/**
+ * batadv_netlink_mesh_put_ap_isolation() - Add ap_isolation softif attribute
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_mesh_put_ap_isolation(struct sk_buff *msg,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+ u8 ap_isolation;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return 0;
+
+ ap_isolation = atomic_read(&vlan->ap_isolation);
+ batadv_softif_vlan_put(vlan);
+
+ return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+ !!ap_isolation);
+}
+
+/**
+ * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg
+ * @attr: parsed BATADV_ATTR_AP_ISOLATION_ENABLED attribute
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return -ENOENT;
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ batadv_softif_vlan_put(vlan);
+
+ return 0;
+}
+
/**
* batadv_netlink_mesh_put() - Fill message with mesh attributes
* @msg: Netlink message to dump into
@@ -219,6 +268,17 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->aggregated_ogms)))
goto nla_put_failure;
+ if (batadv_netlink_mesh_put_ap_isolation(msg, bat_priv))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK,
+ bat_priv->isolation_mark))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK,
+ bat_priv->isolation_mark_mask))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -309,6 +369,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
}
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+ batadv_netlink_set_mesh_ap_isolation(attr, bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MARK];
+
+ bat_priv->isolation_mark = nla_get_u32(attr);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MASK];
+
+ bat_priv->isolation_mark_mask = nla_get_u32(attr);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
@@ -705,6 +783,10 @@ static int batadv_netlink_vlan_put(struct sk_buff *msg,
if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
goto nla_put_failure;
+ if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION_ENABLED,
+ !!atomic_read(&vlan->ap_isolation)))
+ goto nla_put_failure;
+
genlmsg_end(msg, hdr);
return 0;
@@ -785,6 +867,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
{
struct batadv_softif_vlan *vlan = info->user_ptr[1];
struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION_ENABLED];
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ }
batadv_netlink_notify_vlan(bat_priv, vlan);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 07/19] batman-adv: Add bonding mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Simon Wunderlich
The mesh interface can use multiple slave/hard-interface ports at the same
time to transport the traffic to other nodes.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_BONDING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a4dadafe..f74ff261 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -375,6 +375,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ISOLATION_MASK,
+ /**
+ * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+ * the mesh will be sent using multiple interfaces at the same time.
+ */
+ BATADV_ATTR_BONDING_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index df003c65..8a309c78 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
+ [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -279,6 +280,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
bat_priv->isolation_mark_mask))
goto nla_put_failure;
+ if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED,
+ !!atomic_read(&bat_priv->bonding)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
bat_priv->isolation_mark_mask = nla_get_u32(attr);
}
+ if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_BONDING_ENABLED];
+
+ atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 07/19] batman-adv: Add bonding mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Simon Wunderlich
The mesh interface can use multiple slave/hard-interface ports at the same
time to transport the traffic to other nodes.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_BONDING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a4dadafe..f74ff261 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -375,6 +375,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ISOLATION_MASK,
+ /**
+ * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+ * the mesh will be sent using multiple interfaces at the same time.
+ */
+ BATADV_ATTR_BONDING_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index df003c65..8a309c78 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_AP_ISOLATION_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
+ [BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -279,6 +280,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
bat_priv->isolation_mark_mask))
goto nla_put_failure;
+ if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED,
+ !!atomic_read(&bat_priv->bonding)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
bat_priv->isolation_mark_mask = nla_get_u32(attr);
}
+ if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_BONDING_ENABLED];
+
+ atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 08/19] batman-adv: Add bridge_loop_avoidance mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Simon Wunderlich
The mesh interface can try to detect loops in the same mesh caused by
(indirectly) bridged mesh/soft-interfaces of different nodes. Some of the
loops can also be resolved without breaking the mesh.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f74ff261..3cb35c66 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -381,6 +381,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_BONDING_ENABLED,
+ /**
+ * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+ * avoidance feature is enabled. This feature detects and avoids loops
+ * between the mesh and devices bridged with the soft interface
+ */
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8a309c78..0a29dc75 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -284,6 +285,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->bonding)))
goto nla_put_failure;
+#ifdef CONFIG_BATMAN_ADV_BLA
+ if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+ !!atomic_read(&bat_priv->bridge_loop_avoidance)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
}
+#ifdef CONFIG_BATMAN_ADV_BLA
+ if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED];
+
+ atomic_set(&bat_priv->bridge_loop_avoidance,
+ !!nla_get_u8(attr));
+ batadv_bla_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 08/19] batman-adv: Add bridge_loop_avoidance mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Simon Wunderlich
The mesh interface can try to detect loops in the same mesh caused by
(indirectly) bridged mesh/soft-interfaces of different nodes. Some of the
loops can also be resolved without breaking the mesh.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f74ff261..3cb35c66 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -381,6 +381,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_BONDING_ENABLED,
+ /**
+ * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+ * avoidance feature is enabled. This feature detects and avoids loops
+ * between the mesh and devices bridged with the soft interface
+ */
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8a309c78..0a29dc75 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -284,6 +285,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->bonding)))
goto nla_put_failure;
+#ifdef CONFIG_BATMAN_ADV_BLA
+ if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+ !!atomic_read(&bat_priv->bridge_loop_avoidance)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
}
+#ifdef CONFIG_BATMAN_ADV_BLA
+ if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED];
+
+ atomic_set(&bat_priv->bridge_loop_avoidance,
+ !!nla_get_u8(attr));
+ batadv_bla_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 09/19] batman-adv: Add distributed_arp_table mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The mesh interface can use a distributed hash table to answer ARP requests
without flooding the request through the whole mesh.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 3cb35c66..f303a149 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -388,6 +388,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+ /**
+ * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+ * arp table feature is enabled. This feature uses a distributed hash
+ * table to answer ARP requests without flooding the request through
+ * the whole mesh.
+ */
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 0a29dc75..68440d2f 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -291,6 +292,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_BLA */
+#ifdef CONFIG_BATMAN_ADV_DAT
+ if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+ !!atomic_read(&bat_priv->distributed_arp_table)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_BLA */
+#ifdef CONFIG_BATMAN_ADV_DAT
+ if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED];
+
+ atomic_set(&bat_priv->distributed_arp_table,
+ !!nla_get_u8(attr));
+ batadv_dat_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 09/19] batman-adv: Add distributed_arp_table mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The mesh interface can use a distributed hash table to answer ARP requests
without flooding the request through the whole mesh.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero
will disable this feature and setting it to something else is enabling this
feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 3cb35c66..f303a149 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -388,6 +388,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+ /**
+ * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+ * arp table feature is enabled. This feature uses a distributed hash
+ * table to answer ARP requests without flooding the request through
+ * the whole mesh.
+ */
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 0a29dc75..68440d2f 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -291,6 +292,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_BLA */
+#ifdef CONFIG_BATMAN_ADV_DAT
+ if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+ !!atomic_read(&bat_priv->distributed_arp_table)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_BLA */
+#ifdef CONFIG_BATMAN_ADV_DAT
+ if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED];
+
+ atomic_set(&bat_priv->distributed_arp_table,
+ !!nla_get_u8(attr));
+ batadv_dat_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 10/19] batman-adv: Add fragmentation mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Andreas Langer,
Martin Hundeboll, Marek Lindner
The mesh interface can fragment unicast packets when the packet size
exceeds the outgoing slave/hard-interface MTU.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Andreas Langer <an.langer@gmx.de>
Cc: Martin Hundeboll <martin@hundeboll.net>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 19 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f303a149..847841b8 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -396,6 +396,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+ /**
+ * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+ * through the mesh will be fragmented or silently discarded if the
+ * packet size exceeds the outgoing interface MTU.
+ */
+ BATADV_ATTR_FRAGMENTATION_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 68440d2f..45f6aee5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -146,6 +146,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -298,6 +299,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_DAT */
+ if (nla_put_u8(msg, BATADV_ATTR_FRAGMENTATION_ENABLED,
+ !!atomic_read(&bat_priv->fragmentation)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -432,6 +437,13 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_DAT */
+ if (info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED];
+
+ atomic_set(&bat_priv->fragmentation, !!nla_get_u8(attr));
+ batadv_update_min_mtu(bat_priv->soft_iface);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 10/19] batman-adv: Add fragmentation mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Andreas Langer,
Martin Hundeboll, Marek Lindner
The mesh interface can fragment unicast packets when the packet size
exceeds the outgoing slave/hard-interface MTU.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Andreas Langer <an.langer@gmx.de>
Cc: Martin Hundeboll <martin@hundeboll.net>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 19 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index f303a149..847841b8 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -396,6 +396,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+ /**
+ * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+ * through the mesh will be fragmented or silently discarded if the
+ * packet size exceeds the outgoing interface MTU.
+ */
+ BATADV_ATTR_FRAGMENTATION_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 68440d2f..45f6aee5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -146,6 +146,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_BONDING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -298,6 +299,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_DAT */
+ if (nla_put_u8(msg, BATADV_ATTR_FRAGMENTATION_ENABLED,
+ !!atomic_read(&bat_priv->fragmentation)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -432,6 +437,13 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_DAT */
+ if (info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED];
+
+ atomic_set(&bat_priv->fragmentation, !!nla_get_u8(attr));
+ batadv_update_min_mtu(bat_priv->soft_iface);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 11/19] batman-adv: Add gateway mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner, Antonio Quartulli
The mesh/soft-interface can optimize the handling of DHCP packets. Instead
of flooding them through the whole mesh, it can be forwarded as unicast to
a specific gateway server. The originator which injects the packets in the
mesh has to select (based on sel_class thresholds) a responsible gateway
server. This is done by switching this originator to the gw_mode client.
The servers announce their forwarding bandwidth (download/upload) when the
gw_mode server was selected.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the attributes:
* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server)
* u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_SEL_CLASS
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 40 ++++++++++++++
net/batman-adv/gateway_client.c | 1 -
net/batman-adv/gateway_common.c | 1 +
net/batman-adv/gateway_common.h | 6 ---
net/batman-adv/netlink.c | 92 +++++++++++++++++++++++++++++++++
net/batman-adv/soft-interface.c | 2 +-
net/batman-adv/sysfs.c | 1 +
7 files changed, 135 insertions(+), 8 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 847841b8..165272be 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -139,6 +139,20 @@ enum batadv_mcast_flags_priv {
BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
};
+/**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+ /** @BATADV_GW_MODE_OFF: gw mode disabled */
+ BATADV_GW_MODE_OFF,
+
+ /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+ BATADV_GW_MODE_CLIENT,
+
+ /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */
+ BATADV_GW_MODE_SERVER,
+};
+
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
*/
@@ -403,6 +417,32 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_FRAGMENTATION_ENABLED,
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+ * Possible values are specified in enum batadv_gw_modes
+ */
+ BATADV_ATTR_GW_MODE,
+
+ /**
+ * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+ * will use to choose a gateway if gw_mode was set to 'client'.
+ */
+ BATADV_ATTR_GW_SEL_CLASS,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index 0a6b9b30..f5811f61 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -47,7 +47,6 @@
#include <uapi/linux/batadv_packet.h>
#include <uapi/linux/batman_adv.h>
-#include "gateway_common.h"
#include "hard-interface.h"
#include "log.h"
#include "netlink.h"
diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c
index 53d03adc..e064de45 100644
--- a/net/batman-adv/gateway_common.c
+++ b/net/batman-adv/gateway_common.c
@@ -28,6 +28,7 @@
#include <linux/stddef.h>
#include <linux/string.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "gateway_client.h"
#include "log.h"
diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h
index 89bae100..128467a0 100644
--- a/net/batman-adv/gateway_common.h
+++ b/net/batman-adv/gateway_common.h
@@ -25,12 +25,6 @@
struct net_device;
-enum batadv_gw_modes {
- BATADV_GW_MODE_OFF,
- BATADV_GW_MODE_CLIENT,
- BATADV_GW_MODE_SERVER,
-};
-
/**
* enum batadv_bandwidth_units - bandwidth unit types
*/
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 45f6aee5..8db3a2a4 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -51,6 +51,7 @@
#include "bridge_loop_avoidance.h"
#include "distributed-arp-table.h"
#include "gateway_client.h"
+#include "gateway_common.h"
#include "hard-interface.h"
#include "multicast.h"
#include "originator.h"
@@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_GW_BANDWIDTH_DOWN] = { .type = NLA_U32 },
+ [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 },
+ [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
+ [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
};
/**
@@ -303,6 +308,28 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->fragmentation)))
goto nla_put_failure;
+ if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN,
+ atomic_read(&bat_priv->gw.bandwidth_down)))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP,
+ atomic_read(&bat_priv->gw.bandwidth_up)))
+ goto nla_put_failure;
+
+ if (nla_put_u8(msg, BATADV_ATTR_GW_MODE,
+ atomic_read(&bat_priv->gw.mode)))
+ goto nla_put_failure;
+
+ if (bat_priv->algo_ops->gw.get_best_gw_node &&
+ bat_priv->algo_ops->gw.is_eligible) {
+ /* GW selection class is not available if the routing algorithm
+ * in use does not implement the GW API
+ */
+ if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS,
+ atomic_read(&bat_priv->gw.sel_class)))
+ goto nla_put_failure;
+ }
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
batadv_update_min_mtu(bat_priv->soft_iface);
}
+ if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) {
+ attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN];
+
+ atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr));
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) {
+ attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP];
+
+ atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr));
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_MODE]) {
+ u8 gw_mode;
+
+ attr = info->attrs[BATADV_ATTR_GW_MODE];
+ gw_mode = nla_get_u8(attr);
+
+ if (gw_mode <= BATADV_GW_MODE_SERVER) {
+ /* Invoking batadv_gw_reselect() is not enough to really
+ * de-select the current GW. It will only instruct the
+ * gateway client code to perform a re-election the next
+ * time that this is needed.
+ *
+ * When gw client mode is being switched off the current
+ * GW must be de-selected explicitly otherwise no GW_ADD
+ * uevent is thrown on client mode re-activation. This
+ * is operation is performed in
+ * batadv_gw_check_client_stop().
+ */
+ batadv_gw_reselect(bat_priv);
+
+ /* always call batadv_gw_check_client_stop() before
+ * changing the gateway state
+ */
+ batadv_gw_check_client_stop(bat_priv);
+ atomic_set(&bat_priv->gw.mode, gw_mode);
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] &&
+ bat_priv->algo_ops->gw.get_best_gw_node &&
+ bat_priv->algo_ops->gw.is_eligible) {
+ /* setting the GW selection class is allowed only if the routing
+ * algorithm in use implements the GW API
+ */
+
+ u32 sel_class_max = 0xffffffffu;
+ u32 sel_class;
+
+ attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS];
+ sel_class = nla_get_u32(attr);
+
+ if (!bat_priv->algo_ops->gw.store_sel_class)
+ sel_class_max = BATADV_TQ_MAX_VALUE;
+
+ if (sel_class >= 1 && sel_class <= sel_class_max) {
+ atomic_set(&bat_priv->gw.sel_class, sel_class);
+ batadv_gw_reselect(bat_priv);
+ }
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 5357dcae..d27a543f 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -50,13 +50,13 @@
#include <linux/string.h>
#include <linux/types.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "bat_algo.h"
#include "bridge_loop_avoidance.h"
#include "debugfs.h"
#include "distributed-arp-table.h"
#include "gateway_client.h"
-#include "gateway_common.h"
#include "hard-interface.h"
#include "multicast.h"
#include "network-coding.h"
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index e1b81626..64fd5932 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -40,6 +40,7 @@
#include <linux/stringify.h>
#include <linux/workqueue.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "bridge_loop_avoidance.h"
#include "distributed-arp-table.h"
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 11/19] batman-adv: Add gateway mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner, Antonio Quartulli
The mesh/soft-interface can optimize the handling of DHCP packets. Instead
of flooding them through the whole mesh, it can be forwarded as unicast to
a specific gateway server. The originator which injects the packets in the
mesh has to select (based on sel_class thresholds) a responsible gateway
server. This is done by switching this originator to the gw_mode client.
The servers announce their forwarding bandwidth (download/upload) when the
gw_mode server was selected.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the attributes:
* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server)
* u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_SEL_CLASS
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 40 ++++++++++++++
net/batman-adv/gateway_client.c | 1 -
net/batman-adv/gateway_common.c | 1 +
net/batman-adv/gateway_common.h | 6 ---
net/batman-adv/netlink.c | 92 +++++++++++++++++++++++++++++++++
net/batman-adv/soft-interface.c | 2 +-
net/batman-adv/sysfs.c | 1 +
7 files changed, 135 insertions(+), 8 deletions(-)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 847841b8..165272be 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -139,6 +139,20 @@ enum batadv_mcast_flags_priv {
BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
};
+/**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+ /** @BATADV_GW_MODE_OFF: gw mode disabled */
+ BATADV_GW_MODE_OFF,
+
+ /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+ BATADV_GW_MODE_CLIENT,
+
+ /** @BATADV_GW_MODE_SERVER: announce itself as gatway server */
+ BATADV_GW_MODE_SERVER,
+};
+
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
*/
@@ -403,6 +417,32 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_FRAGMENTATION_ENABLED,
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+ /**
+ * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+ * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+ * to 'server'.
+ */
+ BATADV_ATTR_GW_BANDWIDTH_UP,
+
+ /**
+ * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+ * Possible values are specified in enum batadv_gw_modes
+ */
+ BATADV_ATTR_GW_MODE,
+
+ /**
+ * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+ * will use to choose a gateway if gw_mode was set to 'client'.
+ */
+ BATADV_ATTR_GW_SEL_CLASS,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index 0a6b9b30..f5811f61 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -47,7 +47,6 @@
#include <uapi/linux/batadv_packet.h>
#include <uapi/linux/batman_adv.h>
-#include "gateway_common.h"
#include "hard-interface.h"
#include "log.h"
#include "netlink.h"
diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c
index 53d03adc..e064de45 100644
--- a/net/batman-adv/gateway_common.c
+++ b/net/batman-adv/gateway_common.c
@@ -28,6 +28,7 @@
#include <linux/stddef.h>
#include <linux/string.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "gateway_client.h"
#include "log.h"
diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h
index 89bae100..128467a0 100644
--- a/net/batman-adv/gateway_common.h
+++ b/net/batman-adv/gateway_common.h
@@ -25,12 +25,6 @@
struct net_device;
-enum batadv_gw_modes {
- BATADV_GW_MODE_OFF,
- BATADV_GW_MODE_CLIENT,
- BATADV_GW_MODE_SERVER,
-};
-
/**
* enum batadv_bandwidth_units - bandwidth unit types
*/
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 45f6aee5..8db3a2a4 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -51,6 +51,7 @@
#include "bridge_loop_avoidance.h"
#include "distributed-arp-table.h"
#include "gateway_client.h"
+#include "gateway_common.h"
#include "hard-interface.h"
#include "multicast.h"
#include "originator.h"
@@ -147,6 +148,10 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_FRAGMENTATION_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_GW_BANDWIDTH_DOWN] = { .type = NLA_U32 },
+ [BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 },
+ [BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
+ [BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
};
/**
@@ -303,6 +308,28 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->fragmentation)))
goto nla_put_failure;
+ if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_DOWN,
+ atomic_read(&bat_priv->gw.bandwidth_down)))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_GW_BANDWIDTH_UP,
+ atomic_read(&bat_priv->gw.bandwidth_up)))
+ goto nla_put_failure;
+
+ if (nla_put_u8(msg, BATADV_ATTR_GW_MODE,
+ atomic_read(&bat_priv->gw.mode)))
+ goto nla_put_failure;
+
+ if (bat_priv->algo_ops->gw.get_best_gw_node &&
+ bat_priv->algo_ops->gw.is_eligible) {
+ /* GW selection class is not available if the routing algorithm
+ * in use does not implement the GW API
+ */
+ if (nla_put_u32(msg, BATADV_ATTR_GW_SEL_CLASS,
+ atomic_read(&bat_priv->gw.sel_class)))
+ goto nla_put_failure;
+ }
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -444,6 +471,71 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
batadv_update_min_mtu(bat_priv->soft_iface);
}
+ if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN]) {
+ attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_DOWN];
+
+ atomic_set(&bat_priv->gw.bandwidth_down, nla_get_u32(attr));
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP]) {
+ attr = info->attrs[BATADV_ATTR_GW_BANDWIDTH_UP];
+
+ atomic_set(&bat_priv->gw.bandwidth_up, nla_get_u32(attr));
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_MODE]) {
+ u8 gw_mode;
+
+ attr = info->attrs[BATADV_ATTR_GW_MODE];
+ gw_mode = nla_get_u8(attr);
+
+ if (gw_mode <= BATADV_GW_MODE_SERVER) {
+ /* Invoking batadv_gw_reselect() is not enough to really
+ * de-select the current GW. It will only instruct the
+ * gateway client code to perform a re-election the next
+ * time that this is needed.
+ *
+ * When gw client mode is being switched off the current
+ * GW must be de-selected explicitly otherwise no GW_ADD
+ * uevent is thrown on client mode re-activation. This
+ * is operation is performed in
+ * batadv_gw_check_client_stop().
+ */
+ batadv_gw_reselect(bat_priv);
+
+ /* always call batadv_gw_check_client_stop() before
+ * changing the gateway state
+ */
+ batadv_gw_check_client_stop(bat_priv);
+ atomic_set(&bat_priv->gw.mode, gw_mode);
+ batadv_gw_tvlv_container_update(bat_priv);
+ }
+ }
+
+ if (info->attrs[BATADV_ATTR_GW_SEL_CLASS] &&
+ bat_priv->algo_ops->gw.get_best_gw_node &&
+ bat_priv->algo_ops->gw.is_eligible) {
+ /* setting the GW selection class is allowed only if the routing
+ * algorithm in use implements the GW API
+ */
+
+ u32 sel_class_max = 0xffffffffu;
+ u32 sel_class;
+
+ attr = info->attrs[BATADV_ATTR_GW_SEL_CLASS];
+ sel_class = nla_get_u32(attr);
+
+ if (!bat_priv->algo_ops->gw.store_sel_class)
+ sel_class_max = BATADV_TQ_MAX_VALUE;
+
+ if (sel_class >= 1 && sel_class <= sel_class_max) {
+ atomic_set(&bat_priv->gw.sel_class, sel_class);
+ batadv_gw_reselect(bat_priv);
+ }
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 5357dcae..d27a543f 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -50,13 +50,13 @@
#include <linux/string.h>
#include <linux/types.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "bat_algo.h"
#include "bridge_loop_avoidance.h"
#include "debugfs.h"
#include "distributed-arp-table.h"
#include "gateway_client.h"
-#include "gateway_common.h"
#include "hard-interface.h"
#include "multicast.h"
#include "network-coding.h"
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index e1b81626..64fd5932 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -40,6 +40,7 @@
#include <linux/stringify.h>
#include <linux/workqueue.h>
#include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
#include "bridge_loop_avoidance.h"
#include "distributed-arp-table.h"
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 12/19] batman-adv: Add hop_penalty mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing,
Marek Lindner, Antonio Quartulli, Simon Wunderlich
The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced
when they are forwarded. One of the reductions is the penalty for
traversing an additional hop. This hop_penalty (0-255) defines the
percentage of reduction (0-100%).
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 165272be..b37cb923 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -443,6 +443,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_GW_SEL_CLASS,
+ /**
+ * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+ * to an originator message's tq-field on every hop.
+ */
+ BATADV_ATTR_HOP_PENALTY,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8db3a2a4..8602129f 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -152,6 +152,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 },
[BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
+ [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
};
/**
@@ -330,6 +331,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
}
+ if (nla_put_u8(msg, BATADV_ATTR_HOP_PENALTY,
+ atomic_read(&bat_priv->hop_penalty)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -536,6 +541,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
}
+ if (info->attrs[BATADV_ATTR_HOP_PENALTY]) {
+ attr = info->attrs[BATADV_ATTR_HOP_PENALTY];
+
+ atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 12/19] batman-adv: Add hop_penalty mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing,
Marek Lindner, Antonio Quartulli, Simon Wunderlich
The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced
when they are forwarded. One of the reductions is the penalty for
traversing an additional hop. This hop_penalty (0-255) defines the
percentage of reduction (0-100%).
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 165272be..b37cb923 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -443,6 +443,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_GW_SEL_CLASS,
+ /**
+ * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+ * to an originator message's tq-field on every hop.
+ */
+ BATADV_ATTR_HOP_PENALTY,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8db3a2a4..8602129f 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -152,6 +152,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_BANDWIDTH_UP] = { .type = NLA_U32 },
[BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
+ [BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
};
/**
@@ -330,6 +331,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
}
+ if (nla_put_u8(msg, BATADV_ATTR_HOP_PENALTY,
+ atomic_read(&bat_priv->hop_penalty)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -536,6 +541,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
}
+ if (info->attrs[BATADV_ATTR_HOP_PENALTY]) {
+ attr = info->attrs[BATADV_ATTR_HOP_PENALTY];
+
+ atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 13/19] batman-adv: Add log_level mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b37cb923..6d36e4b4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_HOP_PENALTY,
+ /**
+ * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+ * should be send to the debug log/trace ring buffer
+ */
+ BATADV_ATTR_LOG_LEVEL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8602129f..d39f8f83 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
#include "gateway_client.h"
#include "gateway_common.h"
#include "hard-interface.h"
+#include "log.h"
#include "multicast.h"
#include "originator.h"
#include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
+ [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
};
/**
@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
atomic_read(&bat_priv->hop_penalty)))
goto nla_put_failure;
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+ if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+ atomic_read(&bat_priv->log_level)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
}
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+ if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+ attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+ atomic_set(&bat_priv->log_level,
+ nla_get_u32(attr) & BATADV_DBG_ALL);
+ }
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 13/19] batman-adv: Add log_level mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b37cb923..6d36e4b4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_HOP_PENALTY,
+ /**
+ * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+ * should be send to the debug log/trace ring buffer
+ */
+ BATADV_ATTR_LOG_LEVEL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8602129f..d39f8f83 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
#include "gateway_client.h"
#include "gateway_common.h"
#include "hard-interface.h"
+#include "log.h"
#include "multicast.h"
#include "originator.h"
#include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_MODE] = { .type = NLA_U8 },
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
+ [BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
};
/**
@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
atomic_read(&bat_priv->hop_penalty)))
goto nla_put_failure;
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+ if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+ atomic_read(&bat_priv->log_level)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
}
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+ if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+ attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+ atomic_set(&bat_priv->log_level,
+ nla_get_u32(attr) & BATADV_DBG_ALL);
+ }
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 14/19] batman-adv: Add multicast_mode mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing
The mesh interface can optimize the flooding of multicast packets based on
the content of the global translation tables.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_MULTICAST_MODE_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 15 +++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 6d36e4b4..9f5c85a5 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -455,6 +455,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_LOG_LEVEL,
+ /**
+ * @BATADV_ATTR_MULTICAST_MODE_ENABLED: whether multicast optimizations
+ * are enabled or disabled. If set to zero then all nodes in the mesh
+ * are going to use classic flooding for any multicast packet with no
+ * optimizations.
+ */
+ BATADV_ATTR_MULTICAST_MODE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index d39f8f83..a0fbad39 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -155,6 +155,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
+ [BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -343,6 +344,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_DEBUG */
+#ifdef CONFIG_BATMAN_ADV_MCAST
+ if (nla_put_u8(msg, BATADV_ATTR_MULTICAST_MODE_ENABLED,
+ !!atomic_read(&bat_priv->multicast_mode)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -564,6 +571,14 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_DEBUG */
+#ifdef CONFIG_BATMAN_ADV_MCAST
+ if (info->attrs[BATADV_ATTR_MULTICAST_MODE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_MULTICAST_MODE_ENABLED];
+
+ atomic_set(&bat_priv->multicast_mode, !!nla_get_u8(attr));
+ }
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 14/19] batman-adv: Add multicast_mode mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing
The mesh interface can optimize the flooding of multicast packets based on
the content of the global translation tables.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_MULTICAST_MODE_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 15 +++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 6d36e4b4..9f5c85a5 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -455,6 +455,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_LOG_LEVEL,
+ /**
+ * @BATADV_ATTR_MULTICAST_MODE_ENABLED: whether multicast optimizations
+ * are enabled or disabled. If set to zero then all nodes in the mesh
+ * are going to use classic flooding for any multicast packet with no
+ * optimizations.
+ */
+ BATADV_ATTR_MULTICAST_MODE_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index d39f8f83..a0fbad39 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -155,6 +155,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_GW_SEL_CLASS] = { .type = NLA_U32 },
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
+ [BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -343,6 +344,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_DEBUG */
+#ifdef CONFIG_BATMAN_ADV_MCAST
+ if (nla_put_u8(msg, BATADV_ATTR_MULTICAST_MODE_ENABLED,
+ !!atomic_read(&bat_priv->multicast_mode)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -564,6 +571,14 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_DEBUG */
+#ifdef CONFIG_BATMAN_ADV_MCAST
+ if (info->attrs[BATADV_ATTR_MULTICAST_MODE_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_MULTICAST_MODE_ENABLED];
+
+ atomic_set(&bat_priv->multicast_mode, !!nla_get_u8(attr));
+ }
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 15/19] batman-adv: Add network_coding mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Martin Hundeboll, Marek Lindner
The mesh interface can use (in an homogeneous mesh) network coding, a
mechanism that aims to increase the overall network throughput by fusing
multiple packets in one transmission.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Martin Hundeboll <martin@hundeboll.net>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 9f5c85a5..2f0dbcc0 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -463,6 +463,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_MULTICAST_MODE_ENABLED,
+ /**
+ * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+ * some magic to send fewer wifi packets but still the same content) is
+ * enabled or not.
+ */
+ BATADV_ATTR_NETWORK_CODING_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index a0fbad39..9c7f8ca5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -55,6 +55,7 @@
#include "hard-interface.h"
#include "log.h"
#include "multicast.h"
+#include "network-coding.h"
#include "originator.h"
#include "soft-interface.h"
#include "tp_meter.h"
@@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -350,6 +352,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_MCAST */
+#ifdef CONFIG_BATMAN_ADV_NC
+ if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED,
+ !!atomic_read(&bat_priv->network_coding)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_NC */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_MCAST */
+#ifdef CONFIG_BATMAN_ADV_NC
+ if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED];
+
+ atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr));
+ batadv_nc_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_NC */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 15/19] batman-adv: Add network_coding mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n
Cc: Jiri Pirko, netdev, Sven Eckelmann, Martin Hundeboll, Marek Lindner
The mesh interface can use (in an homogeneous mesh) network coding, a
mechanism that aims to increase the overall network throughput by fusing
multiple packets in one transmission.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED
attribute. Setting the u8 to zero will disable this feature and setting it
to something else is enabling this feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Martin Hundeboll <martin@hundeboll.net>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 7 +++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 9f5c85a5..2f0dbcc0 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -463,6 +463,13 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_MULTICAST_MODE_ENABLED,
+ /**
+ * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+ * some magic to send fewer wifi packets but still the same content) is
+ * enabled or not.
+ */
+ BATADV_ATTR_NETWORK_CODING_ENABLED,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index a0fbad39..9c7f8ca5 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -55,6 +55,7 @@
#include "hard-interface.h"
#include "log.h"
#include "multicast.h"
+#include "network-coding.h"
#include "originator.h"
#include "soft-interface.h"
#include "tp_meter.h"
@@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_HOP_PENALTY] = { .type = NLA_U8 },
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
};
/**
@@ -350,6 +352,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_MCAST */
+#ifdef CONFIG_BATMAN_ADV_NC
+ if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED,
+ !!atomic_read(&bat_priv->network_coding)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_NC */
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_MCAST */
+#ifdef CONFIG_BATMAN_ADV_NC
+ if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) {
+ attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED];
+
+ atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr));
+ batadv_nc_status_update(bat_priv->soft_iface);
+ }
+#endif /* CONFIG_BATMAN_ADV_NC */
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 16/19] batman-adv: Add orig_interval mesh genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
The OGM packets are transmitted every orig_interval milliseconds. This
value can be changed using the configuration interface.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 2f0dbcc0..5c18d454 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -470,6 +470,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_NETWORK_CODING_ENABLED,
+ /**
+ * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+ * which batman sends its protocol messages.
+ */
+ BATADV_ATTR_ORIG_INTERVAL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 9c7f8ca5..fbb75177 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -158,6 +158,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
};
/**
@@ -358,6 +359,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_NC */
+ if (nla_put_u32(msg, BATADV_ATTR_ORIG_INTERVAL,
+ atomic_read(&bat_priv->orig_interval)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -596,6 +601,18 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_NC */
+ if (info->attrs[BATADV_ATTR_ORIG_INTERVAL]) {
+ u32 orig_interval;
+
+ attr = info->attrs[BATADV_ATTR_ORIG_INTERVAL];
+ orig_interval = nla_get_u32(attr);
+
+ orig_interval = min_t(u32, orig_interval, INT_MAX);
+ orig_interval = max_t(u32, orig_interval, 2 * BATADV_JITTER);
+
+ atomic_set(&bat_priv->orig_interval, orig_interval);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 16/19] batman-adv: Add orig_interval mesh genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Marek Lindner
The OGM packets are transmitted every orig_interval milliseconds. This
value can be changed using the configuration interface.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 2f0dbcc0..5c18d454 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -470,6 +470,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_NETWORK_CODING_ENABLED,
+ /**
+ * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+ * which batman sends its protocol messages.
+ */
+ BATADV_ATTR_ORIG_INTERVAL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 9c7f8ca5..fbb75177 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -158,6 +158,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_LOG_LEVEL] = { .type = NLA_U32 },
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
+ [BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
};
/**
@@ -358,6 +359,10 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_NC */
+ if (nla_put_u32(msg, BATADV_ATTR_ORIG_INTERVAL,
+ atomic_read(&bat_priv->orig_interval)))
+ goto nla_put_failure;
+
if (primary_if)
batadv_hardif_put(primary_if);
@@ -596,6 +601,18 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
}
#endif /* CONFIG_BATMAN_ADV_NC */
+ if (info->attrs[BATADV_ATTR_ORIG_INTERVAL]) {
+ u32 orig_interval;
+
+ attr = info->attrs[BATADV_ATTR_ORIG_INTERVAL];
+ orig_interval = nla_get_u32(attr);
+
+ orig_interval = min_t(u32, orig_interval, INT_MAX);
+ orig_interval = max_t(u32, orig_interval, 2 * BATADV_JITTER);
+
+ atomic_set(&bat_priv->orig_interval, orig_interval);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 17/19] batman-adv: Add elp_interval hardif genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing
The ELP packets are transmitted every elp_interval milliseconds on an
slave/hard-interface. This value can be changed using the configuration
interface.
The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 5c18d454..a2abbf7d 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -476,6 +476,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ORIG_INTERVAL,
+ /**
+ * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+ * which batman emits probing packets for neighbor sensing (ELP).
+ */
+ BATADV_ATTR_ELP_INTERVAL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index fbb75177..48d33ae4 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
+ [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 },
};
/**
@@ -825,6 +826,12 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
goto nla_put_failure;
}
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
+ atomic_read(&hard_iface->bat_v.elp_interval)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
genlmsg_end(msg, hdr);
return 0;
@@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
struct batadv_hard_iface *hard_iface = info->user_ptr[1];
struct batadv_priv *bat_priv = info->user_ptr[0];
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) {
+ attr = info->attrs[BATADV_ATTR_ELP_INTERVAL];
+
+ atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
+ }
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
batadv_netlink_notify_hardif(bat_priv, hard_iface);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 17/19] batman-adv: Add elp_interval hardif genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Linus Lüssing
The ELP packets are transmitted every elp_interval milliseconds on an
slave/hard-interface. This value can be changed using the configuration
interface.
The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL
attribute.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
---
include/uapi/linux/batman_adv.h | 6 ++++++
net/batman-adv/netlink.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index 5c18d454..a2abbf7d 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -476,6 +476,12 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ORIG_INTERVAL,
+ /**
+ * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+ * which batman emits probing packets for neighbor sensing (ELP).
+ */
+ BATADV_ATTR_ELP_INTERVAL,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index fbb75177..48d33ae4 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MULTICAST_MODE_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
+ [BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 },
};
/**
@@ -825,6 +826,12 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
goto nla_put_failure;
}
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
+ atomic_read(&hard_iface->bat_v.elp_interval)))
+ goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
genlmsg_end(msg, hdr);
return 0;
@@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
struct batadv_hard_iface *hard_iface = info->user_ptr[1];
struct batadv_priv *bat_priv = info->user_ptr[0];
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) {
+ attr = info->attrs[BATADV_ATTR_ELP_INTERVAL];
+
+ atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
+ }
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
batadv_netlink_notify_hardif(bat_priv, hard_iface);
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 18/19] batman-adv: Add throughput_override hardif genl configuration
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The B.A.T.M.A.N. V implementation tries to estimate the link throughput of
an interface to an originator using different automatic methods. It is
still possible to overwrite it the link throughput for all reachable
originators via this interface.
The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32
BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s.
If the value is set to 0 then batman-adv will try to estimate the
throughput by itself.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 20 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a2abbf7d..9031e8a1 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -482,6 +482,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ELP_INTERVAL,
+ /**
+ * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+ * used by B.A.T.M.A.N. V when estimating the link throughput using
+ * this interface. If the value is set to 0 then batman-adv will try to
+ * estimate the throughput by itself.
+ */
+ BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 48d33ae4..34ff51ac 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -160,6 +160,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
[BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 },
+ [BATADV_ATTR_THROUGHPUT_OVERRIDE] = { .type = NLA_U32 },
};
/**
@@ -830,6 +831,10 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
atomic_read(&hard_iface->bat_v.elp_interval)))
goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE,
+ atomic_read(&hard_iface->bat_v.throughput_override)))
+ goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
genlmsg_end(msg, hdr);
@@ -925,6 +930,13 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
}
+
+ if (info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]) {
+ attr = info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE];
+
+ atomic_set(&hard_iface->bat_v.throughput_override,
+ nla_get_u32(attr));
+ }
#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
batadv_netlink_notify_hardif(bat_priv, hard_iface);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 18/19] batman-adv: Add throughput_override hardif genl configuration
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann, Antonio Quartulli
The B.A.T.M.A.N. V implementation tries to estimate the link throughput of
an interface to an originator using different automatic methods. It is
still possible to overwrite it the link throughput for all reachable
originators via this interface.
The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get
the configuration of this feature using the u32
BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s.
If the value is set to 0 then batman-adv will try to estimate the
throughput by itself.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Antonio Quartulli <a@unstable.cc>
---
include/uapi/linux/batman_adv.h | 8 ++++++++
net/batman-adv/netlink.c | 12 ++++++++++++
2 files changed, 20 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a2abbf7d..9031e8a1 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -482,6 +482,14 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_ELP_INTERVAL,
+ /**
+ * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+ * used by B.A.T.M.A.N. V when estimating the link throughput using
+ * this interface. If the value is set to 0 then batman-adv will try to
+ * estimate the throughput by itself.
+ */
+ BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 48d33ae4..34ff51ac 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -160,6 +160,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_NETWORK_CODING_ENABLED] = { .type = NLA_U8 },
[BATADV_ATTR_ORIG_INTERVAL] = { .type = NLA_U32 },
[BATADV_ATTR_ELP_INTERVAL] = { .type = NLA_U32 },
+ [BATADV_ATTR_THROUGHPUT_OVERRIDE] = { .type = NLA_U32 },
};
/**
@@ -830,6 +831,10 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
atomic_read(&hard_iface->bat_v.elp_interval)))
goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE,
+ atomic_read(&hard_iface->bat_v.throughput_override)))
+ goto nla_put_failure;
#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
genlmsg_end(msg, hdr);
@@ -925,6 +930,13 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
}
+
+ if (info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]) {
+ attr = info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE];
+
+ atomic_set(&hard_iface->bat_v.throughput_override,
+ nla_get_u32(attr));
+ }
#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
batadv_netlink_notify_hardif(bat_priv, hard_iface);
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [RFC v4 19/19] batman-adv: Trigger genl notification on sysfs config change
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-19 15:56 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The generic netlink code is expected to trigger notification messages when
configuration might have been changed. But the configuration of batman-adv
is most of the time still done using sysfs. So the sysfs interface should
also trigger the corresponding netlink messages via the "config" multicast
group.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/netlink.c | 10 +++----
net/batman-adv/netlink.h | 6 ++++
net/batman-adv/sysfs.c | 63 +++++++++++++++++++++++++++++++++-------
3 files changed, 63 insertions(+), 16 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 34ff51ac..13678d96 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -385,7 +385,7 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
{
struct sk_buff *msg;
int ret;
@@ -852,8 +852,8 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
- struct batadv_hard_iface *hard_iface)
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface)
{
struct sk_buff *msg;
int ret;
@@ -1057,8 +1057,8 @@ static int batadv_netlink_vlan_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
- struct batadv_softif_vlan *vlan)
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan)
{
struct sk_buff *msg;
int ret;
diff --git a/net/batman-adv/netlink.h b/net/batman-adv/netlink.h
index 216484b8..72733685 100644
--- a/net/batman-adv/netlink.h
+++ b/net/batman-adv/netlink.h
@@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
u8 result, u32 test_time, u64 total_bytes,
u32 cookie);
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv);
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface);
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan);
+
extern struct genl_family batadv_netlink_family;
#endif /* _NET_BATMAN_ADV_NETLINK_H_ */
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index 64fd5932..0b4b3fb7 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -48,6 +48,7 @@
#include "gateway_common.h"
#include "hard-interface.h"
#include "log.h"
+#include "netlink.h"
#include "network-coding.h"
#include "soft-interface.h"
@@ -154,9 +155,14 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_priv *bat_priv = netdev_priv(net_dev); \
+ ssize_t length; \
+ \
+ length = __batadv_store_bool_attr(buff, count, _post_func, attr,\
+ &bat_priv->_name, net_dev); \
\
- return __batadv_store_bool_attr(buff, count, _post_func, attr, \
- &bat_priv->_name, net_dev); \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
+ return length; \
}
#define BATADV_ATTR_SIF_SHOW_BOOL(_name) \
@@ -186,11 +192,16 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_priv *bat_priv = netdev_priv(net_dev); \
+ ssize_t length; \
\
- return __batadv_store_uint_attr(buff, count, _min, _max, \
- _post_func, attr, \
- &bat_priv->_var, net_dev, \
- NULL); \
+ length = __batadv_store_uint_attr(buff, count, _min, _max, \
+ _post_func, attr, \
+ &bat_priv->_var, net_dev, \
+ NULL); \
+ \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
+ return length; \
}
#define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \
@@ -223,6 +234,11 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj, \
attr, &vlan->_name, \
bat_priv->soft_iface); \
\
+ if (vlan->vid) \
+ batadv_netlink_notify_vlan(bat_priv, vlan); \
+ else \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
batadv_softif_vlan_put(vlan); \
return res; \
}
@@ -256,6 +272,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_hard_iface *hard_iface; \
+ struct batadv_priv *bat_priv; \
ssize_t length; \
\
hard_iface = batadv_hardif_get_by_netdev(net_dev); \
@@ -268,6 +285,11 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
hard_iface->soft_iface, \
net_dev); \
\
+ if (hard_iface->soft_iface) { \
+ bat_priv = netdev_priv(hard_iface->soft_iface); \
+ batadv_netlink_notify_hardif(bat_priv, hard_iface); \
+ } \
+ \
batadv_hardif_put(hard_iface); \
return length; \
}
@@ -537,6 +559,9 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
batadv_gw_check_client_stop(bat_priv);
atomic_set(&bat_priv->gw.mode, (unsigned int)gw_mode_tmp);
batadv_gw_tvlv_container_update(bat_priv);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
return count;
}
@@ -563,6 +588,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
size_t count)
{
struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
+ ssize_t length;
/* setting the GW selection class is allowed only if the routing
* algorithm in use implements the GW API
@@ -578,10 +604,14 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff,
count);
- return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
- batadv_post_gw_reselect, attr,
- &bat_priv->gw.sel_class,
- bat_priv->soft_iface, NULL);
+ length = __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
+ batadv_post_gw_reselect, attr,
+ &bat_priv->gw.sel_class,
+ bat_priv->soft_iface, NULL);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return length;
}
static ssize_t batadv_show_gw_bwidth(struct kobject *kobj,
@@ -601,12 +631,18 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj,
struct attribute *attr, char *buff,
size_t count)
{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
+ ssize_t length;
if (buff[count - 1] == '\n')
buff[count - 1] = '\0';
- return batadv_gw_bandwidth_set(net_dev, buff, count);
+ length = batadv_gw_bandwidth_set(net_dev, buff, count);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return length;
}
/**
@@ -674,6 +710,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj,
"New skb mark for extended isolation: %#.8x/%#.8x\n",
bat_priv->isolation_mark, bat_priv->isolation_mark_mask);
+ batadv_netlink_notify_mesh(bat_priv);
+
return count;
}
@@ -1078,6 +1116,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
struct attribute *attr,
char *buff, size_t count)
{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
struct batadv_hard_iface *hard_iface;
u32 tp_override;
@@ -1108,6 +1147,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
atomic_set(&hard_iface->bat_v.throughput_override, tp_override);
+ batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
out:
batadv_hardif_put(hard_iface);
return count;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* [B.A.T.M.A.N.] [RFC v4 19/19] batman-adv: Trigger genl notification on sysfs config change
@ 2019-01-19 15:56 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-19 15:56 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, Sven Eckelmann
The generic netlink code is expected to trigger notification messages when
configuration might have been changed. But the configuration of batman-adv
is most of the time still done using sysfs. So the sysfs interface should
also trigger the corresponding netlink messages via the "config" multicast
group.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/netlink.c | 10 +++----
net/batman-adv/netlink.h | 6 ++++
net/batman-adv/sysfs.c | 63 +++++++++++++++++++++++++++++++++-------
3 files changed, 63 insertions(+), 16 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 34ff51ac..13678d96 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -385,7 +385,7 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
{
struct sk_buff *msg;
int ret;
@@ -852,8 +852,8 @@ static int batadv_netlink_hardif_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
- struct batadv_hard_iface *hard_iface)
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface)
{
struct sk_buff *msg;
int ret;
@@ -1057,8 +1057,8 @@ static int batadv_netlink_vlan_put(struct sk_buff *msg,
*
* Return: 0 on success, < 0 on error
*/
-static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
- struct batadv_softif_vlan *vlan)
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan)
{
struct sk_buff *msg;
int ret;
diff --git a/net/batman-adv/netlink.h b/net/batman-adv/netlink.h
index 216484b8..72733685 100644
--- a/net/batman-adv/netlink.h
+++ b/net/batman-adv/netlink.h
@@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
u8 result, u32 test_time, u64 total_bytes,
u32 cookie);
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv);
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+ struct batadv_hard_iface *hard_iface);
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+ struct batadv_softif_vlan *vlan);
+
extern struct genl_family batadv_netlink_family;
#endif /* _NET_BATMAN_ADV_NETLINK_H_ */
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index 64fd5932..0b4b3fb7 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -48,6 +48,7 @@
#include "gateway_common.h"
#include "hard-interface.h"
#include "log.h"
+#include "netlink.h"
#include "network-coding.h"
#include "soft-interface.h"
@@ -154,9 +155,14 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_priv *bat_priv = netdev_priv(net_dev); \
+ ssize_t length; \
+ \
+ length = __batadv_store_bool_attr(buff, count, _post_func, attr,\
+ &bat_priv->_name, net_dev); \
\
- return __batadv_store_bool_attr(buff, count, _post_func, attr, \
- &bat_priv->_name, net_dev); \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
+ return length; \
}
#define BATADV_ATTR_SIF_SHOW_BOOL(_name) \
@@ -186,11 +192,16 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_priv *bat_priv = netdev_priv(net_dev); \
+ ssize_t length; \
\
- return __batadv_store_uint_attr(buff, count, _min, _max, \
- _post_func, attr, \
- &bat_priv->_var, net_dev, \
- NULL); \
+ length = __batadv_store_uint_attr(buff, count, _min, _max, \
+ _post_func, attr, \
+ &bat_priv->_var, net_dev, \
+ NULL); \
+ \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
+ return length; \
}
#define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \
@@ -223,6 +234,11 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj, \
attr, &vlan->_name, \
bat_priv->soft_iface); \
\
+ if (vlan->vid) \
+ batadv_netlink_notify_vlan(bat_priv, vlan); \
+ else \
+ batadv_netlink_notify_mesh(bat_priv); \
+ \
batadv_softif_vlan_put(vlan); \
return res; \
}
@@ -256,6 +272,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
{ \
struct net_device *net_dev = batadv_kobj_to_netdev(kobj); \
struct batadv_hard_iface *hard_iface; \
+ struct batadv_priv *bat_priv; \
ssize_t length; \
\
hard_iface = batadv_hardif_get_by_netdev(net_dev); \
@@ -268,6 +285,11 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \
hard_iface->soft_iface, \
net_dev); \
\
+ if (hard_iface->soft_iface) { \
+ bat_priv = netdev_priv(hard_iface->soft_iface); \
+ batadv_netlink_notify_hardif(bat_priv, hard_iface); \
+ } \
+ \
batadv_hardif_put(hard_iface); \
return length; \
}
@@ -537,6 +559,9 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
batadv_gw_check_client_stop(bat_priv);
atomic_set(&bat_priv->gw.mode, (unsigned int)gw_mode_tmp);
batadv_gw_tvlv_container_update(bat_priv);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
return count;
}
@@ -563,6 +588,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
size_t count)
{
struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
+ ssize_t length;
/* setting the GW selection class is allowed only if the routing
* algorithm in use implements the GW API
@@ -578,10 +604,14 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff,
count);
- return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
- batadv_post_gw_reselect, attr,
- &bat_priv->gw.sel_class,
- bat_priv->soft_iface, NULL);
+ length = __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
+ batadv_post_gw_reselect, attr,
+ &bat_priv->gw.sel_class,
+ bat_priv->soft_iface, NULL);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return length;
}
static ssize_t batadv_show_gw_bwidth(struct kobject *kobj,
@@ -601,12 +631,18 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj,
struct attribute *attr, char *buff,
size_t count)
{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
+ ssize_t length;
if (buff[count - 1] == '\n')
buff[count - 1] = '\0';
- return batadv_gw_bandwidth_set(net_dev, buff, count);
+ length = batadv_gw_bandwidth_set(net_dev, buff, count);
+
+ batadv_netlink_notify_mesh(bat_priv);
+
+ return length;
}
/**
@@ -674,6 +710,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj,
"New skb mark for extended isolation: %#.8x/%#.8x\n",
bat_priv->isolation_mark, bat_priv->isolation_mark_mask);
+ batadv_netlink_notify_mesh(bat_priv);
+
return count;
}
@@ -1078,6 +1116,7 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
struct attribute *attr,
char *buff, size_t count)
{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
struct batadv_hard_iface *hard_iface;
u32 tp_override;
@@ -1108,6 +1147,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
atomic_set(&hard_iface->bat_v.throughput_override, tp_override);
+ batadv_netlink_notify_hardif(bat_priv, hard_iface);
+
out:
batadv_hardif_put(hard_iface);
return count;
--
2.20.1
^ permalink raw reply related [flat|nested] 53+ messages in thread
* Re: [RFC v4 04/19] batman-adv: Prepare framework for vlan genl config
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-21 9:44 ` Jiri Pirko
-1 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-21 9:44 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev
Sat, Jan 19, 2019 at 04:56:11PM CET, sven@narfation.org wrote:
[...]
>+/**
>+ * batadv_netlink_vlan_put() - Fill message with vlan attributes
>+ * @msg: Netlink message to dump into
>+ * @bat_priv: the bat priv with all the soft interface information
>+ * @vlan: vlan which was modified
>+ * @cmd: type of message to generate
>+ * @portid: Port making netlink request
>+ * @seq: sequence number for message
>+ * @flags: Additional flags for message
>+ *
>+ * Return: 0 on success or negative error number in case of failure
>+ */
>+static int batadv_netlink_vlan_put(struct sk_buff *msg,
>+ struct batadv_priv *bat_priv,
>+ struct batadv_softif_vlan *vlan,
>+ enum batadv_nl_commands cmd,
>+ u32 portid, u32 seq, int flags)
>+{
>+ void *hdr;
>+
>+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
>+ if (!hdr)
>+ return -ENOBUFS;
>+
>+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
>+ bat_priv->soft_iface->ifindex))
>+ goto nla_put_failure;
>+
>+ if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
>+ goto nla_put_failure;
>+
>+ genlmsg_end(msg, hdr);
>+ return 0;
>+
>+nla_put_failure:
>+ genlmsg_cancel(msg, hdr);
>+ return -EMSGSIZE;
>+}
>+
>+/**
>+ * batadv_netlink_notify_vlan() - send vlan attributes to listener
>+ * @bat_priv: the bat priv with all the soft interface information
>+ * @vlan: vlan which was modified
>+ *
>+ * Return: 0 on success, < 0 on error
>+ */
>+static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
>+ struct batadv_softif_vlan *vlan)
>+{
>+ struct sk_buff *msg;
>+ int ret;
>+
>+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
>+ if (!msg)
>+ return -ENOMEM;
>+
>+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan,
>+ BATADV_CMD_SET_VLAN, 0, 0, 0);
>+ if (ret < 0) {
>+ nlmsg_free(msg);
>+ return ret;
>+ }
>+
>+ genlmsg_multicast_netns(&batadv_netlink_family,
>+ dev_net(bat_priv->soft_iface), msg, 0,
>+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
>+
>+ return 0;
>+}
>+
>+/**
>+ * batadv_netlink_get_vlan() - Get vlan attributes
>+ * @skb: Netlink message with request data
>+ * @info: receiver information
>+ *
>+ * Return: 0 on success or negative error number in case of failure
>+ */
>+static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info)
>+{
>+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
>+ struct batadv_priv *bat_priv = info->user_ptr[0];
>+ struct sk_buff *msg;
>+ int ret;
>+
>+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
>+ if (!msg)
>+ return -ENOMEM;
>+
>+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
>+ info->snd_portid, info->snd_seq, 0);
This get/put naming here looks a bit confusing. Better to use "fill" for
example:
ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
info->snd_portid, info->snd_seq, 0);
>+ if (ret < 0) {
Just "if (!ret)" would do. Same in the rest of the code.
>+ nlmsg_free(msg);
>+ return ret;
>+ }
>+
>+ ret = genlmsg_reply(msg, info);
>+
>+ return ret;
>+}
>+
[...]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 04/19] batman-adv: Prepare framework for vlan genl config
@ 2019-01-21 9:44 ` Jiri Pirko
0 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-21 9:44 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev
Sat, Jan 19, 2019 at 04:56:11PM CET, sven@narfation.org wrote:
[...]
>+/**
>+ * batadv_netlink_vlan_put() - Fill message with vlan attributes
>+ * @msg: Netlink message to dump into
>+ * @bat_priv: the bat priv with all the soft interface information
>+ * @vlan: vlan which was modified
>+ * @cmd: type of message to generate
>+ * @portid: Port making netlink request
>+ * @seq: sequence number for message
>+ * @flags: Additional flags for message
>+ *
>+ * Return: 0 on success or negative error number in case of failure
>+ */
>+static int batadv_netlink_vlan_put(struct sk_buff *msg,
>+ struct batadv_priv *bat_priv,
>+ struct batadv_softif_vlan *vlan,
>+ enum batadv_nl_commands cmd,
>+ u32 portid, u32 seq, int flags)
>+{
>+ void *hdr;
>+
>+ hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, flags, cmd);
>+ if (!hdr)
>+ return -ENOBUFS;
>+
>+ if (nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX,
>+ bat_priv->soft_iface->ifindex))
>+ goto nla_put_failure;
>+
>+ if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
>+ goto nla_put_failure;
>+
>+ genlmsg_end(msg, hdr);
>+ return 0;
>+
>+nla_put_failure:
>+ genlmsg_cancel(msg, hdr);
>+ return -EMSGSIZE;
>+}
>+
>+/**
>+ * batadv_netlink_notify_vlan() - send vlan attributes to listener
>+ * @bat_priv: the bat priv with all the soft interface information
>+ * @vlan: vlan which was modified
>+ *
>+ * Return: 0 on success, < 0 on error
>+ */
>+static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
>+ struct batadv_softif_vlan *vlan)
>+{
>+ struct sk_buff *msg;
>+ int ret;
>+
>+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
>+ if (!msg)
>+ return -ENOMEM;
>+
>+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan,
>+ BATADV_CMD_SET_VLAN, 0, 0, 0);
>+ if (ret < 0) {
>+ nlmsg_free(msg);
>+ return ret;
>+ }
>+
>+ genlmsg_multicast_netns(&batadv_netlink_family,
>+ dev_net(bat_priv->soft_iface), msg, 0,
>+ BATADV_NL_MCGRP_CONFIG, GFP_KERNEL);
>+
>+ return 0;
>+}
>+
>+/**
>+ * batadv_netlink_get_vlan() - Get vlan attributes
>+ * @skb: Netlink message with request data
>+ * @info: receiver information
>+ *
>+ * Return: 0 on success or negative error number in case of failure
>+ */
>+static int batadv_netlink_get_vlan(struct sk_buff *skb, struct genl_info *info)
>+{
>+ struct batadv_softif_vlan *vlan = info->user_ptr[1];
>+ struct batadv_priv *bat_priv = info->user_ptr[0];
>+ struct sk_buff *msg;
>+ int ret;
>+
>+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
>+ if (!msg)
>+ return -ENOMEM;
>+
>+ ret = batadv_netlink_vlan_put(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
>+ info->snd_portid, info->snd_seq, 0);
This get/put naming here looks a bit confusing. Better to use "fill" for
example:
ret = batadv_netlink_vlan_fill(msg, bat_priv, vlan, BATADV_CMD_GET_VLAN,
info->snd_portid, info->snd_seq, 0);
>+ if (ret < 0) {
Just "if (!ret)" would do. Same in the rest of the code.
>+ nlmsg_free(msg);
>+ return ret;
>+ }
>+
>+ ret = genlmsg_reply(msg, info);
>+
>+ return ret;
>+}
>+
[...]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-21 9:47 ` Jiri Pirko
-1 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-21 9:47 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev
Sat, Jan 19, 2019 at 04:56:07PM CET, sven@narfation.org wrote:
>Hi,
>
>Jiri Pirko called the batman-adv configuration interface a while back "a
>huge mistake" [1] and suggested genl as alternative. The first
>reimplementation [2] (based on the team/devlink design) was rejected. This
>second implementation is now using a nl80211-like design. The objects which
>can now be modified/queried are:
>
>* mesh/soft-interface (BATADV_CMD_GET_MESH/BATADV_CMD_SET_MESH)
>* slave/hard-interface (BATADV_CMD_GET_HARDIF/BATADV_CMD_SET_HARDIF)
>* vlan (BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN)
>
>Such a set messages automatically triggers a *_SET_* "reply" via the config
>multicast group. The same behavior was also added to the sysfs interface.
In general aside of couple of nits I described, this iteration of
the patchset looks very nice to me. Thanks!
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
@ 2019-01-21 9:47 ` Jiri Pirko
0 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-21 9:47 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev
Sat, Jan 19, 2019 at 04:56:07PM CET, sven@narfation.org wrote:
>Hi,
>
>Jiri Pirko called the batman-adv configuration interface a while back "a
>huge mistake" [1] and suggested genl as alternative. The first
>reimplementation [2] (based on the team/devlink design) was rejected. This
>second implementation is now using a nl80211-like design. The objects which
>can now be modified/queried are:
>
>* mesh/soft-interface (BATADV_CMD_GET_MESH/BATADV_CMD_SET_MESH)
>* slave/hard-interface (BATADV_CMD_GET_HARDIF/BATADV_CMD_SET_HARDIF)
>* vlan (BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN)
>
>Such a set messages automatically triggers a *_SET_* "reply" via the config
>multicast group. The same behavior was also added to the sysfs interface.
In general aside of couple of nits I described, this iteration of
the patchset looks very nice to me. Thanks!
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-26 10:47 ` Sven Eckelmann
-1 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-26 10:47 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, linus.luessing
[-- Attachment #1: Type: text/plain, Size: 4099 bytes --]
On Saturday, 19 January 2019 16.56.07 CET Sven Eckelmann wrote:
[...]
> There were also two topics which were not yet really discussed and thus
> these requests (from Linus) were not yet implemented:
@Jiri, @Linus maybe you can discuss these topics further and select the
correct solution.
> * convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
> it like a boolean. Instead use it to select how multicast traffic has to
> be handled:
>
> - 0: ignore multicast optimization and just flood it like broadcast
> traffic
> - 1: enabled multicast optimization
> - 2: undefined but also some kind of multicast optimization
> - 3: undefined but also some kind of multicast of optimization
> - ...
Multicast mode is currently defined.
* according to batctl manpage:
multicast_mode|mm [0|1]
If no parameter is given the current multicast mode set‐
ting is displayed. Otherwise the parameter is used to en‐
able or disable multicast optimizations (i.e. disabling
means always sending own multicast frames via classic
flooding).
* according to sysfs ABI:
What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
Date: Feb 2014
Contact: Linus Lüssing <linus.luessing@web.de>
Description:
Indicates whether multicast optimizations are enabled
or disabled. If set to zero then all nodes in the
mesh are going to use classic flooding for any
multicast packet with no optimizations.
Both define it as boolean value and therefore it was converted to a boolean
value (via u8) in netlink.
But Linus now suggested that it is actually an u32. Most likely 0 == to
something like BATADV_MULTICAST_MODE_FLOODING. But I have no idea what 1 is or
what 2, 3, 4, .. would be. So I need some input here.
And Jiri said that it should be renamed to BATADV_ATTR_MULTICAST_ENABLED -
which seems to suggest that he doesn't like the idea of a u32 for some reason
and prefers to use a boolean value.
And now Linus even said that it should be a bit field - which makes it even
more vague to me and I have now absolutely no idea what should be implemented.
* BIT 0 for flooding vs ?
* BIT 1 for ?
* ...
> * convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
> to mark which type of traffic should be aggregated:
>
> - bit 0: enable aggregation of OGM(2)s
> - bit 1: yet undefined packet type which allows some kind of aggregation
> - bit 2: yet undefined packet type which allows some kind of aggregation
> - ...
Aggregated OGM is currently defined as:
* according to batctl manpage:
aggregation|ag [0|1]
If no parameter is given the current aggregation setting
is displayed. Otherwise the parameter is used to enable or
disable OGM packet aggregation.
* according to sysfs ABI:
What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
Date: May 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.
So sysfs is only one possible backend for the batctl command. There is
currently nothing which I would assume to be aggregatable beside OGMs but let
us assume for now that there is now something and some way to aggregate things
beside OGMs in a save and backward compatible way. Let's call this FOO - so we
have BATADV_ATTR_AGGREGATION_OGM_ENABLED and
BATADV_ATTR_AGGREGATION_FOO_ENABLED. Or we have BATADV_ATTR_AGGREGATION as an
u32 and just use the second bit as marker for FOO (and of course the first bit
as marker for OGM).
Would it now be more preferable to use BATADV_ATTR_AGGREGATION_OGM_ENABLED as
u8 (boolean) or to to switch to BATADV_ATTR_AGGREGATION (u32) & assign single
bits to packet types.
Kind regards,
Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
@ 2019-01-26 10:47 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-01-26 10:47 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Jiri Pirko, netdev, linus.luessing
[-- Attachment #1: Type: text/plain, Size: 4099 bytes --]
On Saturday, 19 January 2019 16.56.07 CET Sven Eckelmann wrote:
[...]
> There were also two topics which were not yet really discussed and thus
> these requests (from Linus) were not yet implemented:
@Jiri, @Linus maybe you can discuss these topics further and select the
correct solution.
> * convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
> it like a boolean. Instead use it to select how multicast traffic has to
> be handled:
>
> - 0: ignore multicast optimization and just flood it like broadcast
> traffic
> - 1: enabled multicast optimization
> - 2: undefined but also some kind of multicast optimization
> - 3: undefined but also some kind of multicast of optimization
> - ...
Multicast mode is currently defined.
* according to batctl manpage:
multicast_mode|mm [0|1]
If no parameter is given the current multicast mode set‐
ting is displayed. Otherwise the parameter is used to en‐
able or disable multicast optimizations (i.e. disabling
means always sending own multicast frames via classic
flooding).
* according to sysfs ABI:
What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
Date: Feb 2014
Contact: Linus Lüssing <linus.luessing@web.de>
Description:
Indicates whether multicast optimizations are enabled
or disabled. If set to zero then all nodes in the
mesh are going to use classic flooding for any
multicast packet with no optimizations.
Both define it as boolean value and therefore it was converted to a boolean
value (via u8) in netlink.
But Linus now suggested that it is actually an u32. Most likely 0 == to
something like BATADV_MULTICAST_MODE_FLOODING. But I have no idea what 1 is or
what 2, 3, 4, .. would be. So I need some input here.
And Jiri said that it should be renamed to BATADV_ATTR_MULTICAST_ENABLED -
which seems to suggest that he doesn't like the idea of a u32 for some reason
and prefers to use a boolean value.
And now Linus even said that it should be a bit field - which makes it even
more vague to me and I have now absolutely no idea what should be implemented.
* BIT 0 for flooding vs ?
* BIT 1 for ?
* ...
> * convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
> to mark which type of traffic should be aggregated:
>
> - bit 0: enable aggregation of OGM(2)s
> - bit 1: yet undefined packet type which allows some kind of aggregation
> - bit 2: yet undefined packet type which allows some kind of aggregation
> - ...
Aggregated OGM is currently defined as:
* according to batctl manpage:
aggregation|ag [0|1]
If no parameter is given the current aggregation setting
is displayed. Otherwise the parameter is used to enable or
disable OGM packet aggregation.
* according to sysfs ABI:
What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
Date: May 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.
So sysfs is only one possible backend for the batctl command. There is
currently nothing which I would assume to be aggregatable beside OGMs but let
us assume for now that there is now something and some way to aggregate things
beside OGMs in a save and backward compatible way. Let's call this FOO - so we
have BATADV_ATTR_AGGREGATION_OGM_ENABLED and
BATADV_ATTR_AGGREGATION_FOO_ENABLED. Or we have BATADV_ATTR_AGGREGATION as an
u32 and just use the second bit as marker for FOO (and of course the first bit
as marker for OGM).
Would it now be more preferable to use BATADV_ATTR_AGGREGATION_OGM_ENABLED as
u8 (boolean) or to to switch to BATADV_ATTR_AGGREGATION (u32) & assign single
bits to packet types.
Kind regards,
Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-01-26 10:47 ` [B.A.T.M.A.N.] " Sven Eckelmann
@ 2019-01-27 8:45 ` Jiri Pirko
-1 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-27 8:45 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev, linus.luessing
Sat, Jan 26, 2019 at 11:47:20AM CET, sven@narfation.org wrote:
>On Saturday, 19 January 2019 16.56.07 CET Sven Eckelmann wrote:
>[...]
>> There were also two topics which were not yet really discussed and thus
>> these requests (from Linus) were not yet implemented:
>
>@Jiri, @Linus maybe you can discuss these topics further and select the
>correct solution.
>
>> * convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
>> it like a boolean. Instead use it to select how multicast traffic has to
>> be handled:
>>
>> - 0: ignore multicast optimization and just flood it like broadcast
>> traffic
>> - 1: enabled multicast optimization
>> - 2: undefined but also some kind of multicast optimization
>> - 3: undefined but also some kind of multicast of optimization
>> - ...
>
>Multicast mode is currently defined.
>
>* according to batctl manpage:
>
> multicast_mode|mm [0|1]
> If no parameter is given the current multicast mode set‐
> ting is displayed. Otherwise the parameter is used to en‐
> able or disable multicast optimizations (i.e. disabling
> means always sending own multicast frames via classic
> flooding).
>
>* according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
> Date: Feb 2014
> Contact: Linus Lüssing <linus.luessing@web.de>
> Description:
> Indicates whether multicast optimizations are enabled
> or disabled. If set to zero then all nodes in the
> mesh are going to use classic flooding for any
> multicast packet with no optimizations.
>
>Both define it as boolean value and therefore it was converted to a boolean
>value (via u8) in netlink.
>
>But Linus now suggested that it is actually an u32. Most likely 0 == to
>something like BATADV_MULTICAST_MODE_FLOODING. But I have no idea what 1 is or
>what 2, 3, 4, .. would be. So I need some input here.
>
>And Jiri said that it should be renamed to BATADV_ATTR_MULTICAST_ENABLED -
>which seems to suggest that he doesn't like the idea of a u32 for some reason
>and prefers to use a boolean value.
>
>And now Linus even said that it should be a bit field - which makes it even
>more vague to me and I have now absolutely no idea what should be implemented.
If it is bool, it should be bool. If it is a bitfield (future more bits
than one needed), it should be a bitfield.
>
>* BIT 0 for flooding vs ?
>* BIT 1 for ?
>* ...
>
>> * convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
>> to mark which type of traffic should be aggregated:
>>
>> - bit 0: enable aggregation of OGM(2)s
>> - bit 1: yet undefined packet type which allows some kind of aggregation
>> - bit 2: yet undefined packet type which allows some kind of aggregation
>> - ...
>
>Aggregated OGM is currently defined as:
>
>
>* according to batctl manpage:
>
> aggregation|ag [0|1]
> If no parameter is given the current aggregation setting
> is displayed. Otherwise the parameter is used to enable or
> disable OGM packet aggregation.
>
>* according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
> Date: May 2010
> Contact: Marek Lindner <mareklindner@neomailbox.ch>
> Description:
> Indicates whether the batman protocol messages of the
> mesh <mesh_iface> shall be aggregated or not.
>
>So sysfs is only one possible backend for the batctl command. There is
>currently nothing which I would assume to be aggregatable beside OGMs but let
>us assume for now that there is now something and some way to aggregate things
>beside OGMs in a save and backward compatible way. Let's call this FOO - so we
>have BATADV_ATTR_AGGREGATION_OGM_ENABLED and
>BATADV_ATTR_AGGREGATION_FOO_ENABLED. Or we have BATADV_ATTR_AGGREGATION as an
>u32 and just use the second bit as marker for FOO (and of course the first bit
>as marker for OGM).
>
>Would it now be more preferable to use BATADV_ATTR_AGGREGATION_OGM_ENABLED as
>u8 (boolean) or to to switch to BATADV_ATTR_AGGREGATION (u32) & assign single
>bits to packet types.
>
>Kind regards,
> Sven
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
@ 2019-01-27 8:45 ` Jiri Pirko
0 siblings, 0 replies; 53+ messages in thread
From: Jiri Pirko @ 2019-01-27 8:45 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: b.a.t.m.a.n, Jiri Pirko, netdev, linus.luessing
Sat, Jan 26, 2019 at 11:47:20AM CET, sven@narfation.org wrote:
>On Saturday, 19 January 2019 16.56.07 CET Sven Eckelmann wrote:
>[...]
>> There were also two topics which were not yet really discussed and thus
>> these requests (from Linus) were not yet implemented:
>
>@Jiri, @Linus maybe you can discuss these topics further and select the
>correct solution.
>
>> * convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
>> it like a boolean. Instead use it to select how multicast traffic has to
>> be handled:
>>
>> - 0: ignore multicast optimization and just flood it like broadcast
>> traffic
>> - 1: enabled multicast optimization
>> - 2: undefined but also some kind of multicast optimization
>> - 3: undefined but also some kind of multicast of optimization
>> - ...
>
>Multicast mode is currently defined.
>
>* according to batctl manpage:
>
> multicast_mode|mm [0|1]
> If no parameter is given the current multicast mode set‐
> ting is displayed. Otherwise the parameter is used to en‐
> able or disable multicast optimizations (i.e. disabling
> means always sending own multicast frames via classic
> flooding).
>
>* according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
> Date: Feb 2014
> Contact: Linus Lüssing <linus.luessing@web.de>
> Description:
> Indicates whether multicast optimizations are enabled
> or disabled. If set to zero then all nodes in the
> mesh are going to use classic flooding for any
> multicast packet with no optimizations.
>
>Both define it as boolean value and therefore it was converted to a boolean
>value (via u8) in netlink.
>
>But Linus now suggested that it is actually an u32. Most likely 0 == to
>something like BATADV_MULTICAST_MODE_FLOODING. But I have no idea what 1 is or
>what 2, 3, 4, .. would be. So I need some input here.
>
>And Jiri said that it should be renamed to BATADV_ATTR_MULTICAST_ENABLED -
>which seems to suggest that he doesn't like the idea of a u32 for some reason
>and prefers to use a boolean value.
>
>And now Linus even said that it should be a bit field - which makes it even
>more vague to me and I have now absolutely no idea what should be implemented.
If it is bool, it should be bool. If it is a bitfield (future more bits
than one needed), it should be a bitfield.
>
>* BIT 0 for flooding vs ?
>* BIT 1 for ?
>* ...
>
>> * convert BATADV_ATTR_AGGREGATION_OGM_ENABLED to u32 and use it
>> to mark which type of traffic should be aggregated:
>>
>> - bit 0: enable aggregation of OGM(2)s
>> - bit 1: yet undefined packet type which allows some kind of aggregation
>> - bit 2: yet undefined packet type which allows some kind of aggregation
>> - ...
>
>Aggregated OGM is currently defined as:
>
>
>* according to batctl manpage:
>
> aggregation|ag [0|1]
> If no parameter is given the current aggregation setting
> is displayed. Otherwise the parameter is used to enable or
> disable OGM packet aggregation.
>
>* according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
> Date: May 2010
> Contact: Marek Lindner <mareklindner@neomailbox.ch>
> Description:
> Indicates whether the batman protocol messages of the
> mesh <mesh_iface> shall be aggregated or not.
>
>So sysfs is only one possible backend for the batctl command. There is
>currently nothing which I would assume to be aggregatable beside OGMs but let
>us assume for now that there is now something and some way to aggregate things
>beside OGMs in a save and backward compatible way. Let's call this FOO - so we
>have BATADV_ATTR_AGGREGATION_OGM_ENABLED and
>BATADV_ATTR_AGGREGATION_FOO_ENABLED. Or we have BATADV_ATTR_AGGREGATION as an
>u32 and just use the second bit as marker for FOO (and of course the first bit
>as marker for OGM).
>
>Would it now be more preferable to use BATADV_ATTR_AGGREGATION_OGM_ENABLED as
>u8 (boolean) or to to switch to BATADV_ATTR_AGGREGATION (u32) & assign single
>bits to packet types.
>
>Kind regards,
> Sven
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-01-26 10:47 ` [B.A.T.M.A.N.] " Sven Eckelmann
(?)
(?)
@ 2019-02-05 17:04 ` Simon Wunderlich
-1 siblings, 0 replies; 53+ messages in thread
From: Simon Wunderlich @ 2019-02-05 17:04 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Sven Eckelmann, netdev, Jiri Pirko
[-- Attachment #1: Type: text/plain, Size: 1804 bytes --]
On Saturday, January 26, 2019 11:47:20 AM CET Sven Eckelmann wrote:
> Aggregated OGM is currently defined as:
>
>
> * according to batctl manpage:
>
> aggregation|ag [0|1]
> If no parameter is given the current aggregation setting
> is displayed. Otherwise the parameter is used to enable or
> disable OGM packet aggregation.
>
> * according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
> Date: May 2010
> Contact: Marek Lindner <mareklindner@neomailbox.ch>
> Description:
> Indicates whether the batman protocol messages of the
> mesh <mesh_iface> shall be aggregated or not.
>
> So sysfs is only one possible backend for the batctl command. There is
> currently nothing which I would assume to be aggregatable beside OGMs but
> let us assume for now that there is now something and some way to
> aggregate things beside OGMs in a save and backward compatible way. Let's
> call this FOO - so we have BATADV_ATTR_AGGREGATION_OGM_ENABLED and
> BATADV_ATTR_AGGREGATION_FOO_ENABLED. Or we have BATADV_ATTR_AGGREGATION as
> an u32 and just use the second bit as marker for FOO (and of course the
> first bit as marker for OGM).
>
> Would it now be more preferable to use BATADV_ATTR_AGGREGATION_OGM_ENABLED
> as u8 (boolean) or to to switch to BATADV_ATTR_AGGREGATION (u32) & assign
> single bits to packet types.
I'd prefer BATADV_ATTR_AGGREGATION_OGM_ENABLED (as we have your patchset now).
Although it may be technically possible to aggregate other things (e.g.
broadcasts), I don't think this will be implemented anytime soon, if at all.
And if we do, we can just make another BATADV_ATTR_AGGREGATION_FOO_ENABLED
flag.
Cheers,
Simon
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-01-26 10:47 ` [B.A.T.M.A.N.] " Sven Eckelmann
` (2 preceding siblings ...)
(?)
@ 2019-02-05 19:24 ` Linus Lüssing
2019-02-06 18:20 ` Sven Eckelmann
-1 siblings, 1 reply; 53+ messages in thread
From: Linus Lüssing @ 2019-02-05 19:24 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking
Cc: netdev, Jiri Pirko
On Sat, Jan 26, 2019 at 11:47:20AM +0100, Sven Eckelmann wrote:
> On Saturday, 19 January 2019 16.56.07 CET Sven Eckelmann wrote:
> [...]
> > There were also two topics which were not yet really discussed and thus
> > these requests (from Linus) were not yet implemented:
>
> @Jiri, @Linus maybe you can discuss these topics further and select the
> correct solution.
>
> > * convert BATADV_ATTR_MULTICAST_MODE_ENABLED to an u32 and let don't handle
> > it like a boolean. Instead use it to select how multicast traffic has to
> > be handled:
> >
> > - 0: ignore multicast optimization and just flood it like broadcast
> > traffic
> > - 1: enabled multicast optimization
> > - 2: undefined but also some kind of multicast optimization
> > - 3: undefined but also some kind of multicast of optimization
> > - ...
>
> Multicast mode is currently defined.
>
> * according to batctl manpage:
>
> multicast_mode|mm [0|1]
> If no parameter is given the current multicast mode set‐
> ting is displayed. Otherwise the parameter is used to en‐
> able or disable multicast optimizations (i.e. disabling
> means always sending own multicast frames via classic
> flooding).
>
> * according to sysfs ABI:
>
> What: /sys/class/net/<mesh_iface>/mesh/multicast_mode
> Date: Feb 2014
> Contact: Linus Lüssing <linus.luessing@web.de>
> Description:
> Indicates whether multicast optimizations are enabled
> or disabled. If set to zero then all nodes in the
> mesh are going to use classic flooding for any
> multicast packet with no optimizations.
>
> Both define it as boolean value and therefore it was converted to a boolean
> value (via u8) in netlink.
>
> But Linus now suggested that it is actually an u32. Most likely 0 == to
> something like BATADV_MULTICAST_MODE_FLOODING. But I have no idea what 1 is or
> what 2, 3, 4, .. would be. So I need some input here.
Right, 0 would be flooding. 1 is the current multicast-aware multi-to-single-unicast
conversion mechanism, which would be extended to a multi-to-multi-unicast mechanism
with the last multicast related patch to the batman mailing list.
In this particular case there is no need to assign a new
multicast_mode == 2, because the old approach can be achieved
again by setting multicast_fanout to 1.
After the multi-to-(multi-)unicast conversion mechanism the next
simple step I would have in mind would be adding a "struct
batadv_mcast_packet". Which would basically behave similar to a
normal batadv_unicast_packet, but would be able to hold a flexible
amount of destination addresses.
And then there was the old tracker packet idea which could come
after that.
And then, recently a source-specific-multicast, reverse tracker
packet approach was discussed. Which would have yet another magnitude
of complexity. But would have very compelling scalability properties.
From a user perspective, once someone relies on some degree of
multicast capabilities and if a new mechanism somehow fails for
the user (for instance a bug or special topology properties), it
might not be feasible to go back to flooding. For instance, let's
say with multicast-to-multi-unicast a Freifunk-like network were now
able to scale to 1500 nodes. And now we introduce some new
enhancements/mechanisms for multicast and things break. Then
flooding would likely leave a broken/unusable network for them
too, due to congestion.
Maybe seeing "multicast_mode" as a gear shift would be an analogy?
> And Jiri said that it should be renamed to BATADV_ATTR_MULTICAST_ENABLED -
> which seems to suggest that he doesn't like the idea of a u32 for some reason
> and prefers to use a boolean value.
>
> And now Linus even said that it should be a bit field - which makes it even
> more vague to me and I have now absolutely no idea what should be implemented.
>
> * BIT 0 for flooding vs ?
Flooding would always be available.
BIT 0: Enable multicast-to-(multi-)unicast
BIT 1: Enable multicast-packet-type
BIT 2: Enable multicast-tracker-packets
BIT 3: Enable ssm-multicast-tracker-packets
...
The thing is, these mechanisms do not necessarilly have to be
exclusive. For instance, the tracker packet mechanism needs to
propagate the tracker packets for a second or so first before it
can be safely used for multicast data packets. In the mean time we
could either flood or buffer the packet. Or we could send them via
multicast-to-multi-unicast.
Hm, but maybe this is getting too flexible. If multicast_mode == n
would mean that all features 0 <= n are available would be fine,
too, I think.
Another thought, if all this is too vague for now... what about
ommiting the BATADV_ATTR_MULTICAST_(MODE)_ENABLED for now and use
a reverse logic instead? Like
BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, defaulting to false.
That still leaves the opportunity to add a BATADV_ATTR_MULTICAST_MODE
option or BATADV_ATTR_MULTICAST_FEATURES bitset later when we have
actual code needing it.
(btw., is there a general preference in netlink towards either
grouping things in bitfields or individual _ENABLED attributes?)
Regards, Linus
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-02-05 19:24 ` Linus Lüssing
@ 2019-02-06 18:20 ` Sven Eckelmann
2019-02-06 19:08 ` Linus Lüssing
0 siblings, 1 reply; 53+ messages in thread
From: Sven Eckelmann @ 2019-02-06 18:20 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Linus Lüssing, netdev, Jiri Pirko
[-- Attachment #1: Type: text/plain, Size: 575 bytes --]
On Tuesday, 5 February 2019 20.24.10 CET Linus Lüssing wrote:
[...]
> Another thought, if all this is too vague for now...
Yes, it is to vague for the integration in netlink :D
> what about
> ommiting the BATADV_ATTR_MULTICAST_(MODE)_ENABLED for now and use
> a reverse logic instead? Like
> BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, defaulting to false.
Would be fine for me. But it is rather odd to map this to the batctl
multicast_mode. But the name is explaining quite well what it does
and you can later rewrite the batctl part.
Kind regards,
Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-02-06 18:20 ` Sven Eckelmann
@ 2019-02-06 19:08 ` Linus Lüssing
2019-02-07 10:02 ` Sven Eckelmann
0 siblings, 1 reply; 53+ messages in thread
From: Linus Lüssing @ 2019-02-06 19:08 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking
Cc: netdev, Jiri Pirko
On Wed, Feb 06, 2019 at 07:20:25PM +0100, Sven Eckelmann wrote:
> On Tuesday, 5 February 2019 20.24.10 CET Linus Lüssing wrote:
> [...]
> > Another thought, if all this is too vague for now...
>
> Yes, it is to vague for the integration in netlink :D
>
> > what about
> > ommiting the BATADV_ATTR_MULTICAST_(MODE)_ENABLED for now and use
> > a reverse logic instead? Like
> > BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, defaulting to false.
>
> Would be fine for me. But it is rather odd to map this to the batctl
> multicast_mode. But the name is explaining quite well what it does
> and you can later rewrite the batctl part.
Ok, will rewrite the batctl part later then. And probably keep "batctl
mm" as a (hidden?) option for compatibility reasons?
Regards, Linus
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [B.A.T.M.A.N.] [RFC v4 00/19] batman-adv: netlink restructuring, part 2
2019-02-06 19:08 ` Linus Lüssing
@ 2019-02-07 10:02 ` Sven Eckelmann
0 siblings, 0 replies; 53+ messages in thread
From: Sven Eckelmann @ 2019-02-07 10:02 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Linus Lüssing, netdev, Jiri Pirko
[-- Attachment #1: Type: text/plain, Size: 238 bytes --]
On Wednesday, 6 February 2019 20:08:14 CET Linus Lüssing wrote:
> Ok, will rewrite the batctl part later then. And probably keep "batctl
> mm" as a (hidden?) option for compatibility reasons?
Yes, sounds good.
Kind regards,
Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 53+ messages in thread
end of thread, other threads:[~2019-02-07 10:06 UTC | newest]
Thread overview: 53+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-19 15:56 [RFC v4 00/19] batman-adv: netlink restructuring, part 2 Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 01/19] batman-adv: Move common genl doit code pre/post hooks Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 02/19] batman-adv: Prepare framework for mesh genl config Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 03/19] batman-adv: Prepare framework for hardif " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 04/19] batman-adv: Prepare framework for vlan " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-21 9:44 ` Jiri Pirko
2019-01-21 9:44 ` [B.A.T.M.A.N.] " Jiri Pirko
2019-01-19 15:56 ` [RFC v4 05/19] batman-adv: Add aggregated_ogms mesh genl configuration Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 06/19] batman-adv: Add ap_isolation mesh/vlan " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 07/19] batman-adv: Add bonding mesh " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 08/19] batman-adv: Add bridge_loop_avoidance " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 09/19] batman-adv: Add distributed_arp_table " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 10/19] batman-adv: Add fragmentation " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 11/19] batman-adv: Add gateway " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 12/19] batman-adv: Add hop_penalty " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 13/19] batman-adv: Add log_level " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 14/19] batman-adv: Add multicast_mode " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 15/19] batman-adv: Add network_coding " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 16/19] batman-adv: Add orig_interval " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 17/19] batman-adv: Add elp_interval hardif " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 18/19] batman-adv: Add throughput_override " Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 19/19] batman-adv: Trigger genl notification on sysfs config change Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-21 9:47 ` [RFC v4 00/19] batman-adv: netlink restructuring, part 2 Jiri Pirko
2019-01-21 9:47 ` [B.A.T.M.A.N.] " Jiri Pirko
2019-01-26 10:47 ` Sven Eckelmann
2019-01-26 10:47 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-27 8:45 ` Jiri Pirko
2019-01-27 8:45 ` [B.A.T.M.A.N.] " Jiri Pirko
2019-02-05 17:04 ` Simon Wunderlich
2019-02-05 19:24 ` Linus Lüssing
2019-02-06 18:20 ` Sven Eckelmann
2019-02-06 19:08 ` Linus Lüssing
2019-02-07 10:02 ` Sven Eckelmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.