From: Michael Leun <ml@elektra.leun.net>
To: Felix Fietkau <nbd@openwrt.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>,
Michael Leun <lkml20120218@newton.leun.net>,
Mohammed Shafi <shafi.wireless@gmail.com>,
Ben Greear <greearb@candelatech.com>,
casteyde.christian@free.fr,
Kelly Anderson <kelly@silka.with-linux.com>,
"ath9k-devel@lists.ath9k.org" <ath9k-devel@venema.h4ckr.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-wireless Mailing List <linux-wireless@vger.kernel.org>,
Sergio Correia <lists@uece.net>
Subject: Re: 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression)
Date: Thu, 12 Apr 2012 17:35:18 +0200 [thread overview]
Message-ID: <20120412173518.2ecd8418@xenia.leun.net> (raw)
In-Reply-To: <CAMP44s1t+kVdRi_zhR1Qt045KEwco_PQhpa-cC9zMWc5QOFA8Q@mail.gmail.com>
On Thu, 12 Apr 2012 16:58:34 +0300
Felipe Contreras <felipe.contreras@gmail.com> wrote:
> On Thu, Apr 12, 2012 at 4:46 PM, Felix Fietkau <nbd@openwrt.org>
> wrote:
> > On 2012-04-09 5:29 PM, Michael Leun wrote:
> >> On Mon, 9 Apr 2012 19:52:45 +0530
>
> >> Seems obvious to me, that this line
> >>
> >> if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
> >>
> >> makes the real difference.
> > Please try this patch with plain 3.3.1 or 3.4-rc2 to see if it fixes
> > this issue:
>
> Nope, not here (3.3.1).
Also negative for 3.4-rc2, but that SLEEP<>AWAKE noise at the end
stopped. Still need "iwconfig wlan0 essid <myssid>" to make it ping
again (that not included in log below).
Due to Felipes result and 3.4-rc2 didn't repeat my test with 3.3.1, if
you think it would add useful information I could.
Apr 12 17:14:23 jill kernel: [ 112.050654] ath: phy2: UNDEFINED -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.050718] ath: phy2: serialize_regmode is 0
Apr 12 17:14:23 jill kernel: [ 112.484482] ath: EEPROM regdomain: 0x37
Apr 12 17:14:23 jill kernel: [ 112.484487] ath: EEPROM indicates we should expect a direct regpair map
Apr 12 17:14:23 jill kernel: [ 112.484491] ath: Country alpha2 being used: AW
Apr 12 17:14:23 jill kernel: [ 112.484494] ath: Regpair used: 0x37
Apr 12 17:14:23 jill kernel: [ 112.491420] ieee80211 phy2: Selected rate control algorithm 'ath9k_rate_control'
Apr 12 17:14:23 jill kernel: [ 112.491856] cfg80211: Calling CRDA for country: DE
Apr 12 17:14:23 jill kernel: [ 112.491917] Registered led device: ath9k-phy2
Apr 12 17:14:23 jill kernel: [ 112.491937] ieee80211 phy2: Atheros AR9280 Rev:2 mem=0xffffc90004140000, irq=19
Apr 12 17:14:23 jill kernel: [ 112.499003] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.504355] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.504360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.504366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504370] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504380] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504384] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.505411] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.511576] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.511582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.511587] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511592] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511597] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511602] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511606] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511632] cfg80211: Calling CRDA for country: AW
Apr 12 17:14:23 jill kernel: [ 112.517260] cfg80211: Regulatory domain changed to country: AW
Apr 12 17:14:23 jill kernel: [ 112.517267] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.517272] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517281] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517285] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517312] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.523269] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.523274] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.523280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523285] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523294] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523299] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523325] cfg80211: Calling CRDA for country: 97
Apr 12 17:14:23 jill ifup[4023]: wlan0 device: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Apr 12 17:14:23 jill ifup[4023]: wlan0 is controlled by ifplugd
Apr 12 17:14:23 jill ifup[4115]: wlan0 device: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Apr 12 17:14:23 jill ifup-wireless[4165]: wlan0 starting wpa_supplicant
Apr 12 17:14:23 jill kernel: [ 112.922810] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.925814] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.930646] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.933057] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.933089] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.934926] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 12 17:14:23 jill kernel: [ 112.935933] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.935948] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.938772] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.954578] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.958174] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.972352] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.975936] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 113.043989] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 113.047551] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 113.047567] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:24 jill kernel: [ 113.055181] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.062439] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.129648] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.197652] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.264706] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.331712] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.398657] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.466662] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.533678] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.600689] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.667706] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.735064] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.802684] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.869665] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.936704] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 114.003657] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.070700] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.137680] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.204599] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.336653] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.468656] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.600668] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.732617] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.864643] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.996648] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.128652] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.260697] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.392609] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.524645] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.656636] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.672835] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:26 jill kernel: [ 115.678140] cfg80211: World regulatory domain updated:
Apr 12 17:14:26 jill kernel: [ 115.678145] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:26 jill kernel: [ 115.678151] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678156] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678161] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678166] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678172] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.788650] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.921656] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.053669] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.182331] wlan0: authenticate with f4:ec:38:e9:6a:e6
Apr 12 17:14:27 jill kernel: [ 116.186678] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.193951] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.196330] wlan0: send auth to f4:ec:38:e9:6a:e6 (try 1/3)
Apr 12 17:14:27 jill kernel: [ 116.199787] wlan0: authenticated
Apr 12 17:14:27 jill kernel: [ 116.204686] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.207753] wlan0: associate with f4:ec:38:e9:6a:e6 (try 1/3)
Apr 12 17:14:27 jill kernel: [ 116.211390] wlan0: RX AssocResp from f4:ec:38:e9:6a:e6 (capab=0x411 status=0 aid=2)
Apr 12 17:14:27 jill kernel: [ 116.211397] wlan0: associated
Apr 12 17:14:27 jill kernel: [ 116.216149] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.218220] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.220204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Apr 12 17:14:27 jill kernel: [ 116.220291] cfg80211: Calling CRDA for country: DE
Apr 12 17:14:27 jill kernel: [ 116.225593] cfg80211: Regulatory domain changed to country: DE
Apr 12 17:14:27 jill kernel: [ 116.225599] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:27 jill kernel: [ 116.225604] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:27 jill kernel: [ 116.225609] cfg80211: (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:27 jill kernel: [ 116.225614] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Apr 12 17:14:27 jill kernel: [ 116.299782] ath: phy2: Reconfigure Beacon timers based on timestamp from the AP
Apr 12 17:14:36 jill kernel: [ 125.510012] EXT4-fs (dm-9): re-mounted. Opts: acl,user_xattr,commit=0
Apr 12 17:14:36 jill kernel: [ 125.514931] EXT4-fs (sda1): re-mounted. Opts: commit=0
Apr 12 17:14:36 jill kernel: [ 125.646231] EXT4-fs (dm-11): re-mounted. Opts: data=ordered,commit=0
Apr 12 17:14:37 jill kernel: [ 126.946681] wlan0: no IPv6 routers present
Apr 12 17:17:46 jill kernel: [ 130.274886] Syncing filesystems ... done.
Apr 12 17:17:46 jill kernel: [ 130.279453] Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 12 17:17:46 jill kernel: [ 130.291870] PM: Preallocating image memory... done (allocated 218689 pages)
Apr 12 17:17:46 jill kernel: [ 130.646523] PM: Allocated 874756 kbytes in 0.35 seconds (2499.30 MB/s)
Apr 12 17:17:46 jill kernel: [ 130.646526] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Apr 12 17:17:46 jill kernel: [ 130.658041] Suspending console(s) (use no_console_suspend to debug)
Apr 12 17:17:46 jill kernel: [ 130.662919] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 130.664981] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:17:46 jill kernel: [ 130.665441] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 12 17:17:46 jill kernel: [ 130.665665] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:17:46 jill kernel: [ 130.668671] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:17:46 jill kernel: [ 130.868779] ACPI handle has no context!
Apr 12 17:17:46 jill kernel: [ 130.879647] PM: freeze of devices complete after 221.598 msecs
Apr 12 17:17:46 jill kernel: [ 130.879824] PM: late freeze of devices complete after 0.171 msecs
Apr 12 17:17:46 jill kernel: [ 130.880472] PM: noirq freeze of devices complete after 0.644 msecs
Apr 12 17:17:46 jill kernel: [ 130.880941] ACPI: Preparing to enter system sleep state S4
Apr 12 17:17:46 jill kernel: [ 130.885692] PM: Saving platform NVS memory
Apr 12 17:17:46 jill kernel: [ 130.887440] Disabling non-boot CPUs ...
Apr 12 17:17:46 jill kernel: [ 130.888929] CPU 1 is now offline
Apr 12 17:17:46 jill kernel: [ 130.889728] PM: Creating hibernation image:
Apr 12 17:17:46 jill kernel: [ 130.889917] PM: Need to copy 218169 pages
Apr 12 17:17:46 jill kernel: [ 130.889917] PM: Restoring platform NVS memory
Apr 12 17:17:46 jill kernel: [ 130.889917] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
Apr 12 17:17:46 jill kernel: [ 130.899599] Enabling non-boot CPUs ...
Apr 12 17:17:46 jill kernel: [ 130.902755] Booting Node 0 Processor 1 APIC 0x1
Apr 12 17:17:46 jill kernel: [ 130.915432] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
Apr 12 17:17:46 jill kernel: [ 130.926329] CPU1 is up
Apr 12 17:17:46 jill kernel: [ 130.928840] ACPI: Waking up from system sleep state S4
Apr 12 17:17:46 jill kernel: [ 131.165333] PM: noirq restore of devices complete after 231.434 msecs
Apr 12 17:17:46 jill kernel: [ 131.165485] PM: early restore of devices complete after 0.108 msecs
Apr 12 17:17:46 jill kernel: [ 131.289931] i915 0000:00:02.0: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.294075] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Apr 12 17:17:46 jill kernel: [ 131.294654] pci 0000:00:1e.0: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.294677] ahci 0000:00:1f.2: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.601146] ata6: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.603114] ata2: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.605108] ata5: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.754089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.766709] ata1.00: configured for UDMA/133
Apr 12 17:17:46 jill kernel: [ 131.777111] sd 0:0:0:0: [sda] Starting disk
Apr 12 17:17:46 jill kernel: [ 134.206347] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:17:46 jill kernel: [ 134.214406] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.216885] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.221626] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.223608] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.223779] PM: restore of devices complete after 2933.955 msecs
Apr 12 17:17:46 jill kernel: [ 134.271168] Restarting kernel threads ... done.
Apr 12 17:17:46 jill kernel: [ 134.271463] Restarting tasks ... done.
Apr 12 17:17:46 jill kernel: [ 134.335596] video LNXVIDEO:00: Restoring backlight state
Apr 12 17:17:46 jill kernel: [ 134.532000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Apr 12 17:17:47 jill kernel: [ 135.876879] EXT4-fs (dm-9): re-mounted. Opts: acl,user_xattr,commit=0
Apr 12 17:17:48 jill kernel: [ 136.217096] EXT4-fs (dm-11): re-mounted. Opts: data=ordered,commit=0
Apr 12 17:17:48 jill kernel: [ 136.221083] EXT4-fs (sda1): re-mounted. Opts: commit=0
--
MfG,
Michael Leun
WARNING: multiple messages have this Message-ID (diff)
From: Michael Leun <ml@elektra.leun.net>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] 3.4-rc ath9k regression (Re: 3.3.1 ath9k regression)
Date: Thu, 12 Apr 2012 17:35:18 +0200 [thread overview]
Message-ID: <20120412173518.2ecd8418@xenia.leun.net> (raw)
In-Reply-To: <CAMP44s1t+kVdRi_zhR1Qt045KEwco_PQhpa-cC9zMWc5QOFA8Q@mail.gmail.com>
On Thu, 12 Apr 2012 16:58:34 +0300
Felipe Contreras <felipe.contreras@gmail.com> wrote:
> On Thu, Apr 12, 2012 at 4:46 PM, Felix Fietkau <nbd@openwrt.org>
> wrote:
> > On 2012-04-09 5:29 PM, Michael Leun wrote:
> >> On Mon, 9 Apr 2012 19:52:45 +0530
>
> >> Seems obvious to me, that this line
> >>
> >> if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
> >>
> >> makes the real difference.
> > Please try this patch with plain 3.3.1 or 3.4-rc2 to see if it fixes
> > this issue:
>
> Nope, not here (3.3.1).
Also negative for 3.4-rc2, but that SLEEP<>AWAKE noise at the end
stopped. Still need "iwconfig wlan0 essid <myssid>" to make it ping
again (that not included in log below).
Due to Felipes result and 3.4-rc2 didn't repeat my test with 3.3.1, if
you think it would add useful information I could.
Apr 12 17:14:23 jill kernel: [ 112.050654] ath: phy2: UNDEFINED -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.050718] ath: phy2: serialize_regmode is 0
Apr 12 17:14:23 jill kernel: [ 112.484482] ath: EEPROM regdomain: 0x37
Apr 12 17:14:23 jill kernel: [ 112.484487] ath: EEPROM indicates we should expect a direct regpair map
Apr 12 17:14:23 jill kernel: [ 112.484491] ath: Country alpha2 being used: AW
Apr 12 17:14:23 jill kernel: [ 112.484494] ath: Regpair used: 0x37
Apr 12 17:14:23 jill kernel: [ 112.491420] ieee80211 phy2: Selected rate control algorithm 'ath9k_rate_control'
Apr 12 17:14:23 jill kernel: [ 112.491856] cfg80211: Calling CRDA for country: DE
Apr 12 17:14:23 jill kernel: [ 112.491917] Registered led device: ath9k-phy2
Apr 12 17:14:23 jill kernel: [ 112.491937] ieee80211 phy2: Atheros AR9280 Rev:2 mem=0xffffc90004140000, irq=19
Apr 12 17:14:23 jill kernel: [ 112.499003] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.504355] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.504360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.504366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504370] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504380] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.504384] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.505411] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.511576] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.511582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.511587] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511592] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511597] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511602] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511606] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.511632] cfg80211: Calling CRDA for country: AW
Apr 12 17:14:23 jill kernel: [ 112.517260] cfg80211: Regulatory domain changed to country: AW
Apr 12 17:14:23 jill kernel: [ 112.517267] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.517272] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517277] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517281] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517285] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Apr 12 17:14:23 jill kernel: [ 112.517312] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:23 jill kernel: [ 112.523269] cfg80211: World regulatory domain updated:
Apr 12 17:14:23 jill kernel: [ 112.523274] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:23 jill kernel: [ 112.523280] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523285] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523294] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523299] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:23 jill kernel: [ 112.523325] cfg80211: Calling CRDA for country: 97
Apr 12 17:14:23 jill ifup[4023]: wlan0 device: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Apr 12 17:14:23 jill ifup[4023]: wlan0 is controlled by ifplugd
Apr 12 17:14:23 jill ifup[4115]: wlan0 device: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Apr 12 17:14:23 jill ifup-wireless[4165]: wlan0 starting wpa_supplicant
Apr 12 17:14:23 jill kernel: [ 112.922810] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.925814] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.930646] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:23 jill kernel: [ 112.933057] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.933089] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.934926] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Apr 12 17:14:23 jill kernel: [ 112.935933] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.935948] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.938772] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.954578] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.958174] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 112.972352] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 112.975936] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 113.043989] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:23 jill kernel: [ 113.047551] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:14:23 jill kernel: [ 113.047567] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:14:24 jill kernel: [ 113.055181] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.062439] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.129648] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.197652] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.264706] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.331712] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.398657] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.466662] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.533678] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.600689] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.667706] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.735064] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.802684] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.869665] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 113.936704] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:24 jill kernel: [ 114.003657] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.070700] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.137680] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.204599] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.336653] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.468656] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.600668] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.732617] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.864643] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:25 jill kernel: [ 114.996648] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.128652] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.260697] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.392609] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.524645] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.656636] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.672835] cfg80211: Calling CRDA to update world regulatory domain
Apr 12 17:14:26 jill kernel: [ 115.678140] cfg80211: World regulatory domain updated:
Apr 12 17:14:26 jill kernel: [ 115.678145] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:26 jill kernel: [ 115.678151] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678156] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678161] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678166] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.678172] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 12 17:14:26 jill kernel: [ 115.788650] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:26 jill kernel: [ 115.921656] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.053669] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.182331] wlan0: authenticate with f4:ec:38:e9:6a:e6
Apr 12 17:14:27 jill kernel: [ 116.186678] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.193951] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.196330] wlan0: send auth to f4:ec:38:e9:6a:e6 (try 1/3)
Apr 12 17:14:27 jill kernel: [ 116.199787] wlan0: authenticated
Apr 12 17:14:27 jill kernel: [ 116.204686] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.207753] wlan0: associate with f4:ec:38:e9:6a:e6 (try 1/3)
Apr 12 17:14:27 jill kernel: [ 116.211390] wlan0: RX AssocResp from f4:ec:38:e9:6a:e6 (capab=0x411 status=0 aid=2)
Apr 12 17:14:27 jill kernel: [ 116.211397] wlan0: associated
Apr 12 17:14:27 jill kernel: [ 116.216149] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.218220] ath: phy2: ah->misc_mode 0x4
Apr 12 17:14:27 jill kernel: [ 116.220204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Apr 12 17:14:27 jill kernel: [ 116.220291] cfg80211: Calling CRDA for country: DE
Apr 12 17:14:27 jill kernel: [ 116.225593] cfg80211: Regulatory domain changed to country: DE
Apr 12 17:14:27 jill kernel: [ 116.225599] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 12 17:14:27 jill kernel: [ 116.225604] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:27 jill kernel: [ 116.225609] cfg80211: (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Apr 12 17:14:27 jill kernel: [ 116.225614] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Apr 12 17:14:27 jill kernel: [ 116.299782] ath: phy2: Reconfigure Beacon timers based on timestamp from the AP
Apr 12 17:14:36 jill kernel: [ 125.510012] EXT4-fs (dm-9): re-mounted. Opts: acl,user_xattr,commit=0
Apr 12 17:14:36 jill kernel: [ 125.514931] EXT4-fs (sda1): re-mounted. Opts: commit=0
Apr 12 17:14:36 jill kernel: [ 125.646231] EXT4-fs (dm-11): re-mounted. Opts: data=ordered,commit=0
Apr 12 17:14:37 jill kernel: [ 126.946681] wlan0: no IPv6 routers present
Apr 12 17:17:46 jill kernel: [ 130.274886] Syncing filesystems ... done.
Apr 12 17:17:46 jill kernel: [ 130.279453] Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 12 17:17:46 jill kernel: [ 130.291870] PM: Preallocating image memory... done (allocated 218689 pages)
Apr 12 17:17:46 jill kernel: [ 130.646523] PM: Allocated 874756 kbytes in 0.35 seconds (2499.30 MB/s)
Apr 12 17:17:46 jill kernel: [ 130.646526] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Apr 12 17:17:46 jill kernel: [ 130.658041] Suspending console(s) (use no_console_suspend to debug)
Apr 12 17:17:46 jill kernel: [ 130.662919] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 130.664981] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:17:46 jill kernel: [ 130.665441] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 12 17:17:46 jill kernel: [ 130.665665] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:17:46 jill kernel: [ 130.668671] ath: phy2: AWAKE -> FULL-SLEEP
Apr 12 17:17:46 jill kernel: [ 130.868779] ACPI handle has no context!
Apr 12 17:17:46 jill kernel: [ 130.879647] PM: freeze of devices complete after 221.598 msecs
Apr 12 17:17:46 jill kernel: [ 130.879824] PM: late freeze of devices complete after 0.171 msecs
Apr 12 17:17:46 jill kernel: [ 130.880472] PM: noirq freeze of devices complete after 0.644 msecs
Apr 12 17:17:46 jill kernel: [ 130.880941] ACPI: Preparing to enter system sleep state S4
Apr 12 17:17:46 jill kernel: [ 130.885692] PM: Saving platform NVS memory
Apr 12 17:17:46 jill kernel: [ 130.887440] Disabling non-boot CPUs ...
Apr 12 17:17:46 jill kernel: [ 130.888929] CPU 1 is now offline
Apr 12 17:17:46 jill kernel: [ 130.889728] PM: Creating hibernation image:
Apr 12 17:17:46 jill kernel: [ 130.889917] PM: Need to copy 218169 pages
Apr 12 17:17:46 jill kernel: [ 130.889917] PM: Restoring platform NVS memory
Apr 12 17:17:46 jill kernel: [ 130.889917] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
Apr 12 17:17:46 jill kernel: [ 130.899599] Enabling non-boot CPUs ...
Apr 12 17:17:46 jill kernel: [ 130.902755] Booting Node 0 Processor 1 APIC 0x1
Apr 12 17:17:46 jill kernel: [ 130.915432] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
Apr 12 17:17:46 jill kernel: [ 130.926329] CPU1 is up
Apr 12 17:17:46 jill kernel: [ 130.928840] ACPI: Waking up from system sleep state S4
Apr 12 17:17:46 jill kernel: [ 131.165333] PM: noirq restore of devices complete after 231.434 msecs
Apr 12 17:17:46 jill kernel: [ 131.165485] PM: early restore of devices complete after 0.108 msecs
Apr 12 17:17:46 jill kernel: [ 131.289931] i915 0000:00:02.0: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.294075] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Apr 12 17:17:46 jill kernel: [ 131.294654] pci 0000:00:1e.0: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.294677] ahci 0000:00:1f.2: setting latency timer to 64
Apr 12 17:17:46 jill kernel: [ 131.601146] ata6: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.603114] ata2: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.605108] ata5: SATA link down (SStatus 0 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.754089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 12 17:17:46 jill kernel: [ 131.766709] ata1.00: configured for UDMA/133
Apr 12 17:17:46 jill kernel: [ 131.777111] sd 0:0:0:0: [sda] Starting disk
Apr 12 17:17:46 jill kernel: [ 134.206347] ath: phy2: FULL-SLEEP -> AWAKE
Apr 12 17:17:46 jill kernel: [ 134.214406] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.216885] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.221626] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.223608] ath: phy2: ah->misc_mode 0x4
Apr 12 17:17:46 jill kernel: [ 134.223779] PM: restore of devices complete after 2933.955 msecs
Apr 12 17:17:46 jill kernel: [ 134.271168] Restarting kernel threads ... done.
Apr 12 17:17:46 jill kernel: [ 134.271463] Restarting tasks ... done.
Apr 12 17:17:46 jill kernel: [ 134.335596] video LNXVIDEO:00: Restoring backlight state
Apr 12 17:17:46 jill kernel: [ 134.532000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Apr 12 17:17:47 jill kernel: [ 135.876879] EXT4-fs (dm-9): re-mounted. Opts: acl,user_xattr,commit=0
Apr 12 17:17:48 jill kernel: [ 136.217096] EXT4-fs (dm-11): re-mounted. Opts: data=ordered,commit=0
Apr 12 17:17:48 jill kernel: [ 136.221083] EXT4-fs (sda1): re-mounted. Opts: commit=0
--
MfG,
Michael Leun
next prev parent reply other threads:[~2012-04-12 16:01 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-03 5:46 3.3.1 ath9k regression Kelly Anderson
2012-04-03 6:01 ` Ben Greear
2012-04-03 6:01 ` [ath9k-devel] " Ben Greear
2012-04-03 6:26 ` Mohammed Shafi
2012-04-03 6:26 ` Mohammed Shafi
2012-04-03 6:49 ` Kelly Anderson
2012-04-03 6:49 ` Kelly Anderson
2012-04-03 7:16 ` Mohammed Shafi
2012-04-03 7:16 ` Mohammed Shafi
2012-04-03 7:46 ` Kelly Anderson
2012-04-03 7:46 ` Kelly Anderson
2012-04-03 7:52 ` Mohammed Shafi
2012-04-03 7:52 ` Mohammed Shafi
2012-04-03 8:04 ` Mohammed Shafi
2012-04-03 8:04 ` Mohammed Shafi
2012-04-03 8:38 ` Kelly Anderson
2012-04-03 8:38 ` Kelly Anderson
2012-04-03 18:03 ` Michael Leun
2012-04-03 18:03 ` Michael Leun
2012-04-04 7:29 ` Mohammed Shafi
2012-04-04 7:29 ` Mohammed Shafi
2012-04-04 15:03 ` Mohammed Shafi
2012-04-04 15:03 ` Mohammed Shafi
2012-04-04 21:51 ` Michael Leun
2012-04-04 21:51 ` Michael Leun
2012-04-05 6:16 ` Mohammed Shafi
2012-04-05 6:16 ` Mohammed Shafi
2012-04-05 13:53 ` Michael Leun
2012-04-05 13:53 ` Michael Leun
2012-04-05 18:25 ` Ben Greear
2012-04-05 18:25 ` Ben Greear
2012-04-06 5:11 ` Mohammed Shafi
2012-04-06 5:11 ` Mohammed Shafi
2012-04-06 20:31 ` Ben Greear
2012-04-06 20:31 ` Ben Greear
2012-04-08 23:08 ` 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression) Michael Leun
2012-04-08 23:08 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 6:28 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-09 6:28 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-09 8:45 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Sergio Correia
2012-04-09 8:45 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Sergio Correia
2012-04-09 10:25 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 10:25 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 14:03 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 14:03 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 14:22 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-09 14:22 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-09 15:29 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 15:29 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-10 5:48 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-10 5:48 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-10 5:55 ` Peter Stuge
2012-04-10 10:05 ` Mohammed Shafi
2012-04-10 10:05 ` Mohammed Shafi
2012-04-12 13:46 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 13:46 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felix Fietkau
2012-04-12 13:58 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felipe Contreras
2012-04-12 13:58 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felipe Contreras
2012-04-12 15:35 ` Michael Leun [this message]
2012-04-12 15:35 ` Michael Leun
2012-04-12 18:11 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 18:11 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felix Fietkau
2012-04-12 19:28 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Sergio Correia
2012-04-12 19:28 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Sergio Correia
2012-04-14 21:15 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felipe Contreras
2012-04-14 21:15 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felipe Contreras
2012-04-12 22:01 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-12 22:01 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 19:12 ` Sujith Manoharan
2012-04-09 19:12 ` Sujith Manoharan
2012-04-09 21:21 ` Michael Leun
2012-04-09 21:21 ` Michael Leun
2012-04-09 6:52 ` [ath9k-devel] 3.3.1 ath9k regression Mohammed Shafi
2012-04-09 6:52 ` Mohammed Shafi
2012-04-04 10:40 ` Mantas M.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120412173518.2ecd8418@xenia.leun.net \
--to=ml@elektra.leun.net \
--cc=ath9k-devel@venema.h4ckr.net \
--cc=casteyde.christian@free.fr \
--cc=felipe.contreras@gmail.com \
--cc=greearb@candelatech.com \
--cc=kelly@silka.with-linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lists@uece.net \
--cc=lkml20120218@newton.leun.net \
--cc=nbd@openwrt.org \
--cc=shafi.wireless@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.