* [PATCH] xl: rename "list-vm" command to "vm-list"
@ 2012-06-28 6:46 Matt Wilson
2012-06-28 6:59 ` Ian Campbell
0 siblings, 1 reply; 12+ messages in thread
From: Matt Wilson @ 2012-06-28 6:46 UTC (permalink / raw)
To: Ian Campbell; +Cc: xen-devel
All of the other "list" verbs are of the form "$noun-list". For
example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
Additionally, many people have well trained muscle memory from years
of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
in "command not implemented".
Signed-off-by: Matt Wilson <msw@amazon.com>
diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl.h
--- a/tools/libxl/xl.h Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl.h Thu Jun 28 06:34:26 2012 +0000
@@ -54,7 +54,7 @@ int main_destroy(int argc, char **argv);
int main_shutdown(int argc, char **argv);
int main_reboot(int argc, char **argv);
int main_list(int argc, char **argv);
-int main_list_vm(int argc, char **argv);
+int main_vm_list(int argc, char **argv);
int main_create(int argc, char **argv);
int main_config_update(int argc, char **argv);
int main_button_press(int argc, char **argv);
diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl_cmdimpl.c Thu Jun 28 06:34:26 2012 +0000
@@ -3623,11 +3623,11 @@ int main_list(int argc, char **argv)
return 0;
}
-int main_list_vm(int argc, char **argv)
+int main_vm_list(int argc, char **argv)
{
int opt;
- if ((opt = def_getopt(argc, argv, "", "list-vm", 0)) != -1)
+ if ((opt = def_getopt(argc, argv, "", "vm-list", 0)) != -1)
return opt;
list_vm();
diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl_cmdtable.c
--- a/tools/libxl/xl_cmdtable.c Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl_cmdtable.c Thu Jun 28 06:34:26 2012 +0000
@@ -214,9 +214,9 @@ struct cmd_spec cmd_table[] = {
"Set the number of active VCPUs allowed for the domain",
"<Domain> <vCPUs>",
},
- { "list-vm",
- &main_list_vm, 0, 0,
- "List the VMs,without DOM0",
+ { "vm-list",
+ &main_vm_list, 0, 0,
+ "List the VMs, without DOM0",
"",
},
{ "info",
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 6:46 [PATCH] xl: rename "list-vm" command to "vm-list" Matt Wilson
@ 2012-06-28 6:59 ` Ian Campbell
2012-06-28 7:28 ` Matt Wilson
0 siblings, 1 reply; 12+ messages in thread
From: Ian Campbell @ 2012-06-28 6:59 UTC (permalink / raw)
To: Matt Wilson; +Cc: xen-devel
On Thu, 2012-06-28 at 07:46 +0100, Matt Wilson wrote:
> All of the other "list" verbs are of the form "$noun-list". For
> example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
> Additionally, many people have well trained muscle memory from years
> of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> in "command not implemented".
Which did xm have list-vm or vm-list (or neither?)
Aside: I'd love for someone to implement (for 4.3) a better error
message than "command not implemented". At the least printing out the
list of clashing options, or even git style "Did you mean" when you make
a typo.
>
> Signed-off-by: Matt Wilson <msw@amazon.com>
>
> diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl.h
> --- a/tools/libxl/xl.h Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl.h Thu Jun 28 06:34:26 2012 +0000
> @@ -54,7 +54,7 @@ int main_destroy(int argc, char **argv);
> int main_shutdown(int argc, char **argv);
> int main_reboot(int argc, char **argv);
> int main_list(int argc, char **argv);
> -int main_list_vm(int argc, char **argv);
> +int main_vm_list(int argc, char **argv);
> int main_create(int argc, char **argv);
> int main_config_update(int argc, char **argv);
> int main_button_press(int argc, char **argv);
> diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl_cmdimpl.c
> --- a/tools/libxl/xl_cmdimpl.c Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl_cmdimpl.c Thu Jun 28 06:34:26 2012 +0000
> @@ -3623,11 +3623,11 @@ int main_list(int argc, char **argv)
> return 0;
> }
>
> -int main_list_vm(int argc, char **argv)
> +int main_vm_list(int argc, char **argv)
> {
> int opt;
>
> - if ((opt = def_getopt(argc, argv, "", "list-vm", 0)) != -1)
> + if ((opt = def_getopt(argc, argv, "", "vm-list", 0)) != -1)
> return opt;
>
> list_vm();
> diff -r 32034d1914a6 -r 34e47ba2612e tools/libxl/xl_cmdtable.c
> --- a/tools/libxl/xl_cmdtable.c Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl_cmdtable.c Thu Jun 28 06:34:26 2012 +0000
> @@ -214,9 +214,9 @@ struct cmd_spec cmd_table[] = {
> "Set the number of active VCPUs allowed for the domain",
> "<Domain> <vCPUs>",
> },
> - { "list-vm",
> - &main_list_vm, 0, 0,
> - "List the VMs,without DOM0",
> + { "vm-list",
> + &main_vm_list, 0, 0,
> + "List the VMs, without DOM0",
> "",
> },
> { "info",
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 6:59 ` Ian Campbell
@ 2012-06-28 7:28 ` Matt Wilson
2012-06-28 7:36 ` Ian Campbell
0 siblings, 1 reply; 12+ messages in thread
From: Matt Wilson @ 2012-06-28 7:28 UTC (permalink / raw)
To: Ian Campbell; +Cc: xen-devel
On Wed, Jun 27, 2012 at 11:59:16PM -0700, Ian Campbell wrote:
> On Thu, 2012-06-28 at 07:46 +0100, Matt Wilson wrote:
> > All of the other "list" verbs are of the form "$noun-list". For
> > example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
> > Additionally, many people have well trained muscle memory from years
> > of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> > in "command not implemented".
>
> Which did xm have list-vm or vm-list (or neither?)
Neither.
> Aside: I'd love for someone to implement (for 4.3) a better error
> message than "command not implemented". At the least printing out the
> list of clashing options, or even git style "Did you mean" when you make
> a typo.
That would definitely be nice to have.
Matt
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 7:28 ` Matt Wilson
@ 2012-06-28 7:36 ` Ian Campbell
2012-06-28 7:37 ` Matt Wilson
0 siblings, 1 reply; 12+ messages in thread
From: Ian Campbell @ 2012-06-28 7:36 UTC (permalink / raw)
To: Matt Wilson; +Cc: xen-devel
On Thu, 2012-06-28 at 08:28 +0100, Matt Wilson wrote:
> On Wed, Jun 27, 2012 at 11:59:16PM -0700, Ian Campbell wrote:
> > On Thu, 2012-06-28 at 07:46 +0100, Matt Wilson wrote:
> > > All of the other "list" verbs are of the form "$noun-list". For
> > > example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
> > > Additionally, many people have well trained muscle memory from years
> > > of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> > > in "command not implemented".
> >
> > Which did xm have list-vm or vm-list (or neither?)
>
> Neither.
In which case I would ack the patch except you forgot to update
docs/man/xl*.pod.? (hrm, somehow list-vm isn't there -- can you add
vm-list anyway?)
Ian.
>
> > Aside: I'd love for someone to implement (for 4.3) a better error
> > message than "command not implemented". At the least printing out the
> > list of clashing options, or even git style "Did you mean" when you make
> > a typo.
>
> That would definitely be nice to have.
>
> Matt
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 7:36 ` Ian Campbell
@ 2012-06-28 7:37 ` Matt Wilson
2012-06-28 7:41 ` Ian Campbell
0 siblings, 1 reply; 12+ messages in thread
From: Matt Wilson @ 2012-06-28 7:37 UTC (permalink / raw)
To: Ian Campbell; +Cc: xen-devel
On Thu, Jun 28, 2012 at 12:36:17AM -0700, Ian Campbell wrote:
> > > On Thu, 2012-06-28 at 07:46 +0100, Matt Wilson wrote:
> > > > All of the other "list" verbs are of the form "$noun-list". For
> > > > example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
> > > > Additionally, many people have well trained muscle memory from years
> > > > of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> > > > in "command not implemented".
> > >
> > > Which did xm have list-vm or vm-list (or neither?)
> >
> > Neither.
>
> In which case I would ack the patch except you forgot to update
> docs/man/xl*.pod.? (hrm, somehow list-vm isn't there -- can you add
> vm-list anyway?)
I grepped for list-vm in the whole xen source tree, trying to make
sure that I updated any corresponding docs. I guess that means I
didn't notice it not being documented at all. :-P
v2 in a moment.
Matt
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 7:37 ` Matt Wilson
@ 2012-06-28 7:41 ` Ian Campbell
0 siblings, 0 replies; 12+ messages in thread
From: Ian Campbell @ 2012-06-28 7:41 UTC (permalink / raw)
To: Matt Wilson; +Cc: xen-devel
On Thu, 2012-06-28 at 08:37 +0100, Matt Wilson wrote:
> On Thu, Jun 28, 2012 at 12:36:17AM -0700, Ian Campbell wrote:
> > > > On Thu, 2012-06-28 at 07:46 +0100, Matt Wilson wrote:
> > > > > All of the other "list" verbs are of the form "$noun-list". For
> > > > > example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
> > > > > Additionally, many people have well trained muscle memory from years
> > > > > of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> > > > > in "command not implemented".
> > > >
> > > > Which did xm have list-vm or vm-list (or neither?)
> > >
> > > Neither.
> >
> > In which case I would ack the patch except you forgot to update
> > docs/man/xl*.pod.? (hrm, somehow list-vm isn't there -- can you add
> > vm-list anyway?)
>
> I grepped for list-vm in the whole xen source tree, trying to make
> sure that I updated any corresponding docs. I guess that means I
> didn't notice it not being documented at all. :-P
I only double checked because I'm pretty sure xl.pod.1 was started with
a grep over xl_cmdtable.c so I can't see how we missed it...
> v2 in a moment.
Thanks!
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 15:08 ` Ian Jackson
2012-06-28 15:14 ` Ian Campbell
@ 2012-06-28 17:07 ` Matt Wilson
1 sibling, 0 replies; 12+ messages in thread
From: Matt Wilson @ 2012-06-28 17:07 UTC (permalink / raw)
To: Ian Jackson; +Cc: Ian Campbell, xen-devel
On Thu, Jun 28, 2012 at 08:08:11AM -0700, Ian Jackson wrote:
> Matt Wilson writes ("[Xen-devel] [PATCH] xl: rename "list-vm" command to "vm-list""):
> > diff -r 32034d1914a6 -r 5b1ed71c74d6 docs/man/xl.pod.1
> > --- a/docs/man/xl.pod.1 Thu Jun 07 19:46:57 2012 +0100
> > +++ b/docs/man/xl.pod.1 Thu Jun 28 06:34:26 2012 +0000
> > @@ -617,6 +617,18 @@ different run state is appropriate. Pin
> > this, by ensuring certain VCPUs can only run on certain physical
> > CPUs.
> >
> > +=item B<vm-list>
> > +
> > +Prints information about all domains except for dom0.
>
> Doesn't it also exclude dm stubdoms, service domains (stub xenstored),
> etc. ? IMO it should, and the docs should say so.
The command uses libxl_list_vm(), which does skip stubdoms by checking
libxl_is_stubdom()
> If it doesn't then that's IMO a bug but stubdoms are a bit buggy
> anyway so I don't regard fixing that as a blocker for this patch. But
> I think we should introduce docs that are correct.
>
> If you and Ian agree, perhaps you'd like to clarify that (and perhaps
> change the usage message too).
v3, coming up.
Matt
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 15:14 ` Ian Campbell
@ 2012-06-28 16:18 ` Ian Jackson
0 siblings, 0 replies; 12+ messages in thread
From: Ian Jackson @ 2012-06-28 16:18 UTC (permalink / raw)
To: Ian Campbell; +Cc: Matt Wilson, xen-devel
Ian Campbell writes ("Re: [Xen-devel] [PATCH] xl: rename "list-vm" command to "vm-list""):
> On Thu, 2012-06-28 at 16:08 +0100, Ian Jackson wrote:
> > Doesn't it also exclude dm stubdoms, service domains (stub xenstored),
> > etc. ? IMO it should, and the docs should say so.
>
> Usually we would say "guest" rather than "domain" to convey this (a
> guest might consist of multiple domains).
Yes, that's the right terminology.
> > If it doesn't then that's IMO a bug but stubdoms are a bit buggy
> > anyway so I don't regard fixing that as a blocker for this patch. But
> > I think we should introduce docs that are correct.
> >
> > If you and Ian agree, perhaps you'd like to clarify that (and perhaps
> > change the usage message too).
>
> I'm happy for the docs to change to reflect what we want but I don't
> want to delay this patch actually making the implementation match.
Exactly.
Ian.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 15:08 ` Ian Jackson
@ 2012-06-28 15:14 ` Ian Campbell
2012-06-28 16:18 ` Ian Jackson
2012-06-28 17:07 ` Matt Wilson
1 sibling, 1 reply; 12+ messages in thread
From: Ian Campbell @ 2012-06-28 15:14 UTC (permalink / raw)
To: Ian Jackson; +Cc: Matt Wilson, xen-devel
On Thu, 2012-06-28 at 16:08 +0100, Ian Jackson wrote:
> Matt Wilson writes ("[Xen-devel] [PATCH] xl: rename "list-vm" command to "vm-list""):
> > diff -r 32034d1914a6 -r 5b1ed71c74d6 docs/man/xl.pod.1
> > --- a/docs/man/xl.pod.1 Thu Jun 07 19:46:57 2012 +0100
> > +++ b/docs/man/xl.pod.1 Thu Jun 28 06:34:26 2012 +0000
> > @@ -617,6 +617,18 @@ different run state is appropriate. Pin
> > this, by ensuring certain VCPUs can only run on certain physical
> > CPUs.
> >
> > +=item B<vm-list>
> > +
> > +Prints information about all domains except for dom0.
>
> Doesn't it also exclude dm stubdoms, service domains (stub xenstored),
> etc. ? IMO it should, and the docs should say so.
Usually we would say "guest" rather than "domain" to convey this (a
guest might consist of multiple domains).
> If it doesn't then that's IMO a bug but stubdoms are a bit buggy
> anyway so I don't regard fixing that as a blocker for this patch. But
> I think we should introduce docs that are correct.
>
> If you and Ian agree, perhaps you'd like to clarify that (and perhaps
> change the usage message too).
I'm happy for the docs to change to reflect what we want but I don't
want to delay this patch actually making the implementation match.
Ian.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 7:59 Matt Wilson
2012-06-28 8:35 ` Ian Campbell
@ 2012-06-28 15:08 ` Ian Jackson
2012-06-28 15:14 ` Ian Campbell
2012-06-28 17:07 ` Matt Wilson
1 sibling, 2 replies; 12+ messages in thread
From: Ian Jackson @ 2012-06-28 15:08 UTC (permalink / raw)
To: Matt Wilson; +Cc: Ian Campbell, xen-devel
Matt Wilson writes ("[Xen-devel] [PATCH] xl: rename "list-vm" command to "vm-list""):
> diff -r 32034d1914a6 -r 5b1ed71c74d6 docs/man/xl.pod.1
> --- a/docs/man/xl.pod.1 Thu Jun 07 19:46:57 2012 +0100
> +++ b/docs/man/xl.pod.1 Thu Jun 28 06:34:26 2012 +0000
> @@ -617,6 +617,18 @@ different run state is appropriate. Pin
> this, by ensuring certain VCPUs can only run on certain physical
> CPUs.
>
> +=item B<vm-list>
> +
> +Prints information about all domains except for dom0.
Doesn't it also exclude dm stubdoms, service domains (stub xenstored),
etc. ? IMO it should, and the docs should say so.
If it doesn't then that's IMO a bug but stubdoms are a bit buggy
anyway so I don't regard fixing that as a blocker for this patch. But
I think we should introduce docs that are correct.
If you and Ian agree, perhaps you'd like to clarify that (and perhaps
change the usage message too).
Thanks,
Ian.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] xl: rename "list-vm" command to "vm-list"
2012-06-28 7:59 Matt Wilson
@ 2012-06-28 8:35 ` Ian Campbell
2012-06-28 15:08 ` Ian Jackson
1 sibling, 0 replies; 12+ messages in thread
From: Ian Campbell @ 2012-06-28 8:35 UTC (permalink / raw)
To: Matt Wilson; +Cc: xen-devel
On Thu, 2012-06-28 at 08:59 +0100, Matt Wilson wrote:
> All of the other "list" verbs are of the form "$noun-list". For
> example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
>
> Additionally, many people have well trained muscle memory from years
> of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
> in "command not implemented".
>
> Finally, this command was missing from the xl man page.
>
> Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I think this appropriate for 4.2.
>
> diff -r 32034d1914a6 -r 5b1ed71c74d6 docs/man/xl.pod.1
> --- a/docs/man/xl.pod.1 Thu Jun 07 19:46:57 2012 +0100
> +++ b/docs/man/xl.pod.1 Thu Jun 28 06:34:26 2012 +0000
> @@ -617,6 +617,18 @@ different run state is appropriate. Pin
> this, by ensuring certain VCPUs can only run on certain physical
> CPUs.
>
> +=item B<vm-list>
> +
> +Prints information about all domains except for dom0.
> +
> +B<EXAMPLE>
> +
> +An example format for the list is as follows:
> +
> +UUID ID name
> +59e1cf6c-6ab9-4879-90e7-adc8d1c63bf5 2 win
> +50bc8f75-81d0-4d53-b2e6-95cb44e2682e 3 linux
> +
> =item B<vncviewer> [I<OPTIONS>] I<domain-id>
>
> Attach to domain's VNC server, forking a vncviewer process.
> diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl.h
> --- a/tools/libxl/xl.h Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl.h Thu Jun 28 06:34:26 2012 +0000
> @@ -54,7 +54,7 @@ int main_destroy(int argc, char **argv);
> int main_shutdown(int argc, char **argv);
> int main_reboot(int argc, char **argv);
> int main_list(int argc, char **argv);
> -int main_list_vm(int argc, char **argv);
> +int main_vm_list(int argc, char **argv);
> int main_create(int argc, char **argv);
> int main_config_update(int argc, char **argv);
> int main_button_press(int argc, char **argv);
> diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl_cmdimpl.c
> --- a/tools/libxl/xl_cmdimpl.c Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl_cmdimpl.c Thu Jun 28 06:34:26 2012 +0000
> @@ -3623,11 +3623,11 @@ int main_list(int argc, char **argv)
> return 0;
> }
>
> -int main_list_vm(int argc, char **argv)
> +int main_vm_list(int argc, char **argv)
> {
> int opt;
>
> - if ((opt = def_getopt(argc, argv, "", "list-vm", 0)) != -1)
> + if ((opt = def_getopt(argc, argv, "", "vm-list", 0)) != -1)
> return opt;
>
> list_vm();
> diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl_cmdtable.c
> --- a/tools/libxl/xl_cmdtable.c Thu Jun 07 19:46:57 2012 +0100
> +++ b/tools/libxl/xl_cmdtable.c Thu Jun 28 06:34:26 2012 +0000
> @@ -214,9 +214,9 @@ struct cmd_spec cmd_table[] = {
> "Set the number of active VCPUs allowed for the domain",
> "<Domain> <vCPUs>",
> },
> - { "list-vm",
> - &main_list_vm, 0, 0,
> - "List the VMs,without DOM0",
> + { "vm-list",
> + &main_vm_list, 0, 0,
> + "List the VMs, without DOM0",
> "",
> },
> { "info",
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] xl: rename "list-vm" command to "vm-list"
@ 2012-06-28 7:59 Matt Wilson
2012-06-28 8:35 ` Ian Campbell
2012-06-28 15:08 ` Ian Jackson
0 siblings, 2 replies; 12+ messages in thread
From: Matt Wilson @ 2012-06-28 7:59 UTC (permalink / raw)
To: Ian Campbell; +Cc: xen-devel
All of the other "list" verbs are of the form "$noun-list". For
example: "pci-list", "vcpu-list", "network-list", "block-list", etc.
Additionally, many people have well trained muscle memory from years
of typing "xm li". "xl li" was ambiguous due to "xl list-vm" resulted
in "command not implemented".
Finally, this command was missing from the xl man page.
Signed-off-by: Matt Wilson <msw@amazon.com>
diff -r 32034d1914a6 -r 5b1ed71c74d6 docs/man/xl.pod.1
--- a/docs/man/xl.pod.1 Thu Jun 07 19:46:57 2012 +0100
+++ b/docs/man/xl.pod.1 Thu Jun 28 06:34:26 2012 +0000
@@ -617,6 +617,18 @@ different run state is appropriate. Pin
this, by ensuring certain VCPUs can only run on certain physical
CPUs.
+=item B<vm-list>
+
+Prints information about all domains except for dom0.
+
+B<EXAMPLE>
+
+An example format for the list is as follows:
+
+UUID ID name
+59e1cf6c-6ab9-4879-90e7-adc8d1c63bf5 2 win
+50bc8f75-81d0-4d53-b2e6-95cb44e2682e 3 linux
+
=item B<vncviewer> [I<OPTIONS>] I<domain-id>
Attach to domain's VNC server, forking a vncviewer process.
diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl.h
--- a/tools/libxl/xl.h Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl.h Thu Jun 28 06:34:26 2012 +0000
@@ -54,7 +54,7 @@ int main_destroy(int argc, char **argv);
int main_shutdown(int argc, char **argv);
int main_reboot(int argc, char **argv);
int main_list(int argc, char **argv);
-int main_list_vm(int argc, char **argv);
+int main_vm_list(int argc, char **argv);
int main_create(int argc, char **argv);
int main_config_update(int argc, char **argv);
int main_button_press(int argc, char **argv);
diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl_cmdimpl.c Thu Jun 28 06:34:26 2012 +0000
@@ -3623,11 +3623,11 @@ int main_list(int argc, char **argv)
return 0;
}
-int main_list_vm(int argc, char **argv)
+int main_vm_list(int argc, char **argv)
{
int opt;
- if ((opt = def_getopt(argc, argv, "", "list-vm", 0)) != -1)
+ if ((opt = def_getopt(argc, argv, "", "vm-list", 0)) != -1)
return opt;
list_vm();
diff -r 32034d1914a6 -r 5b1ed71c74d6 tools/libxl/xl_cmdtable.c
--- a/tools/libxl/xl_cmdtable.c Thu Jun 07 19:46:57 2012 +0100
+++ b/tools/libxl/xl_cmdtable.c Thu Jun 28 06:34:26 2012 +0000
@@ -214,9 +214,9 @@ struct cmd_spec cmd_table[] = {
"Set the number of active VCPUs allowed for the domain",
"<Domain> <vCPUs>",
},
- { "list-vm",
- &main_list_vm, 0, 0,
- "List the VMs,without DOM0",
+ { "vm-list",
+ &main_vm_list, 0, 0,
+ "List the VMs, without DOM0",
"",
},
{ "info",
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2012-06-28 17:07 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-28 6:46 [PATCH] xl: rename "list-vm" command to "vm-list" Matt Wilson
2012-06-28 6:59 ` Ian Campbell
2012-06-28 7:28 ` Matt Wilson
2012-06-28 7:36 ` Ian Campbell
2012-06-28 7:37 ` Matt Wilson
2012-06-28 7:41 ` Ian Campbell
2012-06-28 7:59 Matt Wilson
2012-06-28 8:35 ` Ian Campbell
2012-06-28 15:08 ` Ian Jackson
2012-06-28 15:14 ` Ian Campbell
2012-06-28 16:18 ` Ian Jackson
2012-06-28 17:07 ` Matt Wilson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.