* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-04-23 6:14 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 20+ messages in thread
From: Kishon Vijay Abraham I @ 2013-04-23 6:14 UTC (permalink / raw)
To: linux-arm-kernel
After the device names are created using PLATFORM_DEVID_AUTO, the old
device names given in usb_bind_phy are no longer valid causing the musb
controller not to get the phy reference. Updated the usb_bind_phy with
the new device names to get MUSB functional in omap4 panda.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Tested in OMAP4 PANDA.
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 00d7290..56a9a4f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a71ad34..1e2c75e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -435,7 +435,7 @@ static void __init omap4_panda_init(void)
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-04-23 6:14 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 20+ messages in thread
From: Kishon Vijay Abraham I @ 2013-04-23 6:14 UTC (permalink / raw)
To: tony, linux, linux-omap, linux-arm-kernel, linux-kernel; +Cc: balbi, kishon
After the device names are created using PLATFORM_DEVID_AUTO, the old
device names given in usb_bind_phy are no longer valid causing the musb
controller not to get the phy reference. Updated the usb_bind_phy with
the new device names to get MUSB functional in omap4 panda.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Tested in OMAP4 PANDA.
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 00d7290..56a9a4f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a71ad34..1e2c75e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -435,7 +435,7 @@ static void __init omap4_panda_init(void)
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-04-23 6:14 ` Kishon Vijay Abraham I
@ 2013-04-23 17:36 ` Tony Lindgren
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-04-23 17:36 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: linux, linux-omap, linux-arm-kernel, linux-kernel, balbi
* Kishon Vijay Abraham I <kishon@ti.com> [130422 23:19]:
> After the device names are created using PLATFORM_DEVID_AUTO, the old
> device names given in usb_bind_phy are no longer valid causing the musb
> controller not to get the phy reference. Updated the usb_bind_phy with
> the new device names to get MUSB functional in omap4 panda.
Thanks will apply this into omap-for-v3.10/fixes.
Regards,
Tony
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Tested in OMAP4 PANDA.
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 00d7290..56a9a4f 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> omap4_sdp4430_wifi_init();
> omap4_twl6030_hsmmc_init(mmc);
>
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
>
> status = omap_ethernet_init();
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index a71ad34..1e2c75e 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -435,7 +435,7 @@ static void __init omap4_panda_init(void)
> omap_sdrc_init(NULL, NULL);
> omap4_twl6030_hsmmc_init(mmc);
> omap4_ehci_init();
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
> omap4_panda_display_init();
> }
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-04-23 17:36 ` Tony Lindgren
0 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-04-23 17:36 UTC (permalink / raw)
To: linux-arm-kernel
* Kishon Vijay Abraham I <kishon@ti.com> [130422 23:19]:
> After the device names are created using PLATFORM_DEVID_AUTO, the old
> device names given in usb_bind_phy are no longer valid causing the musb
> controller not to get the phy reference. Updated the usb_bind_phy with
> the new device names to get MUSB functional in omap4 panda.
Thanks will apply this into omap-for-v3.10/fixes.
Regards,
Tony
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Tested in OMAP4 PANDA.
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 00d7290..56a9a4f 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> omap4_sdp4430_wifi_init();
> omap4_twl6030_hsmmc_init(mmc);
>
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
>
> status = omap_ethernet_init();
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index a71ad34..1e2c75e 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -435,7 +435,7 @@ static void __init omap4_panda_init(void)
> omap_sdrc_init(NULL, NULL);
> omap4_twl6030_hsmmc_init(mmc);
> omap4_ehci_init();
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
> omap4_panda_display_init();
> }
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-04-23 6:14 ` Kishon Vijay Abraham I
@ 2013-05-15 10:53 ` Tomi Valkeinen
-1 siblings, 0 replies; 20+ messages in thread
From: Tomi Valkeinen @ 2013-05-15 10:53 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: tony, linux, linux-omap, linux-arm-kernel, linux-kernel, balbi
On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
> After the device names are created using PLATFORM_DEVID_AUTO, the old
> device names given in usb_bind_phy are no longer valid causing the musb
> controller not to get the phy reference. Updated the usb_bind_phy with
> the new device names to get MUSB functional in omap4 panda.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Tested in OMAP4 PANDA.
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 00d7290..56a9a4f 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> omap4_sdp4430_wifi_init();
> omap4_twl6030_hsmmc_init(mmc);
>
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
>
> status = omap_ethernet_init();
I'm seeing
[ 2.190155] unable to find transceiver
[ 2.190155] HS USB OTG: no transceiver configured
[ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
[ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
probe deferral
on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
indeed correct, and the new value of musb-hdrc.2.auto is not?
The musb-hdrc id is wrong on overo also.
Tomi
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-15 10:53 ` Tomi Valkeinen
0 siblings, 0 replies; 20+ messages in thread
From: Tomi Valkeinen @ 2013-05-15 10:53 UTC (permalink / raw)
To: linux-arm-kernel
On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
> After the device names are created using PLATFORM_DEVID_AUTO, the old
> device names given in usb_bind_phy are no longer valid causing the musb
> controller not to get the phy reference. Updated the usb_bind_phy with
> the new device names to get MUSB functional in omap4 panda.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Tested in OMAP4 PANDA.
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 00d7290..56a9a4f 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> omap4_sdp4430_wifi_init();
> omap4_twl6030_hsmmc_init(mmc);
>
> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> usb_musb_init(&musb_board_data);
>
> status = omap_ethernet_init();
I'm seeing
[ 2.190155] unable to find transceiver
[ 2.190155] HS USB OTG: no transceiver configured
[ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
[ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
probe deferral
on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
indeed correct, and the new value of musb-hdrc.2.auto is not?
The musb-hdrc id is wrong on overo also.
Tomi
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-15 10:53 ` Tomi Valkeinen
@ 2013-05-16 15:58 ` Tony Lindgren
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-16 15:58 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Kishon Vijay Abraham I, linux, linux-omap, linux-arm-kernel,
linux-kernel, balbi
* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
> > After the device names are created using PLATFORM_DEVID_AUTO, the old
> > device names given in usb_bind_phy are no longer valid causing the musb
> > controller not to get the phy reference. Updated the usb_bind_phy with
> > the new device names to get MUSB functional in omap4 panda.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > Tested in OMAP4 PANDA.
> > arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> > arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> > index 00d7290..56a9a4f 100644
> > --- a/arch/arm/mach-omap2/board-4430sdp.c
> > +++ b/arch/arm/mach-omap2/board-4430sdp.c
> > @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> > omap4_sdp4430_wifi_init();
> > omap4_twl6030_hsmmc_init(mmc);
> >
> > - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> > + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> > usb_musb_init(&musb_board_data);
> >
> > status = omap_ethernet_init();
>
> I'm seeing
>
> [ 2.190155] unable to find transceiver
> [ 2.190155] HS USB OTG: no transceiver configured
> [ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
> probe deferral
>
> on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
> indeed correct, and the new value of musb-hdrc.2.auto is not?
Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
like the some transceivers should depend on that for omap4.
> The musb-hdrc id is wrong on overo also.
Hmm has there been a fix posted for that?
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-16 15:58 ` Tony Lindgren
0 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-16 15:58 UTC (permalink / raw)
To: linux-arm-kernel
* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
> > After the device names are created using PLATFORM_DEVID_AUTO, the old
> > device names given in usb_bind_phy are no longer valid causing the musb
> > controller not to get the phy reference. Updated the usb_bind_phy with
> > the new device names to get MUSB functional in omap4 panda.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > Tested in OMAP4 PANDA.
> > arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> > arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> > index 00d7290..56a9a4f 100644
> > --- a/arch/arm/mach-omap2/board-4430sdp.c
> > +++ b/arch/arm/mach-omap2/board-4430sdp.c
> > @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> > omap4_sdp4430_wifi_init();
> > omap4_twl6030_hsmmc_init(mmc);
> >
> > - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> > + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> > usb_musb_init(&musb_board_data);
> >
> > status = omap_ethernet_init();
>
> I'm seeing
>
> [ 2.190155] unable to find transceiver
> [ 2.190155] HS USB OTG: no transceiver configured
> [ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
> probe deferral
>
> on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
> indeed correct, and the new value of musb-hdrc.2.auto is not?
Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
like the some transceivers should depend on that for omap4.
> The musb-hdrc id is wrong on overo also.
Hmm has there been a fix posted for that?
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-16 15:58 ` Tony Lindgren
@ 2013-05-16 16:05 ` Tomi Valkeinen
-1 siblings, 0 replies; 20+ messages in thread
From: Tomi Valkeinen @ 2013-05-16 16:05 UTC (permalink / raw)
To: Tony Lindgren
Cc: Kishon Vijay Abraham I, linux, linux-omap, linux-arm-kernel,
linux-kernel, balbi
On 16/05/13 18:58, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>> On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
>>> After the device names are created using PLATFORM_DEVID_AUTO, the old
>>> device names given in usb_bind_phy are no longer valid causing the musb
>>> controller not to get the phy reference. Updated the usb_bind_phy with
>>> the new device names to get MUSB functional in omap4 panda.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> ---
>>> Tested in OMAP4 PANDA.
>>> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
>>> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
>>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
>>> index 00d7290..56a9a4f 100644
>>> --- a/arch/arm/mach-omap2/board-4430sdp.c
>>> +++ b/arch/arm/mach-omap2/board-4430sdp.c
>>> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
>>> omap4_sdp4430_wifi_init();
>>> omap4_twl6030_hsmmc_init(mmc);
>>>
>>> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
>>> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
>>> usb_musb_init(&musb_board_data);
>>>
>>> status = omap_ethernet_init();
>>
>> I'm seeing
>>
>> [ 2.190155] unable to find transceiver
>> [ 2.190155] HS USB OTG: no transceiver configured
>> [ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
>> with status -517
>> [ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
>> probe deferral
>>
>> on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
>> indeed correct, and the new value of musb-hdrc.2.auto is not?
>
> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> like the some transceivers should depend on that for omap4.
Yes, I have OCP2SCP=y.
>> The musb-hdrc id is wrong on overo also.
>
> Hmm has there been a fix posted for that?
I couldn't find with a quick look. We debugged and discussed this on an irc
channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
on overo fixed the issue, and it looks very similar to the error on 4430sdp.
The overo fix was just:
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4ca6b68..a496774 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -472,7 +472,7 @@ static void __init overo_init(void)
mt46h32m32lf6_sdrc_params);
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.1.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
Is that ID "randomly" chosen? Doesn't that mean that it'll just get broken
every now and then?
Tomi
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-16 16:05 ` Tomi Valkeinen
0 siblings, 0 replies; 20+ messages in thread
From: Tomi Valkeinen @ 2013-05-16 16:05 UTC (permalink / raw)
To: linux-arm-kernel
On 16/05/13 18:58, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>> On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
>>> After the device names are created using PLATFORM_DEVID_AUTO, the old
>>> device names given in usb_bind_phy are no longer valid causing the musb
>>> controller not to get the phy reference. Updated the usb_bind_phy with
>>> the new device names to get MUSB functional in omap4 panda.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>> ---
>>> Tested in OMAP4 PANDA.
>>> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
>>> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
>>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
>>> index 00d7290..56a9a4f 100644
>>> --- a/arch/arm/mach-omap2/board-4430sdp.c
>>> +++ b/arch/arm/mach-omap2/board-4430sdp.c
>>> @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
>>> omap4_sdp4430_wifi_init();
>>> omap4_twl6030_hsmmc_init(mmc);
>>>
>>> - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
>>> + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
>>> usb_musb_init(&musb_board_data);
>>>
>>> status = omap_ethernet_init();
>>
>> I'm seeing
>>
>> [ 2.190155] unable to find transceiver
>> [ 2.190155] HS USB OTG: no transceiver configured
>> [ 2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
>> with status -517
>> [ 2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
>> probe deferral
>>
>> on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
>> indeed correct, and the new value of musb-hdrc.2.auto is not?
>
> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> like the some transceivers should depend on that for omap4.
Yes, I have OCP2SCP=y.
>> The musb-hdrc id is wrong on overo also.
>
> Hmm has there been a fix posted for that?
I couldn't find with a quick look. We debugged and discussed this on an irc
channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
on overo fixed the issue, and it looks very similar to the error on 4430sdp.
The overo fix was just:
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4ca6b68..a496774 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -472,7 +472,7 @@ static void __init overo_init(void)
mt46h32m32lf6_sdrc_params);
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+ usb_bind_phy("musb-hdrc.1.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
Is that ID "randomly" chosen? Doesn't that mean that it'll just get broken
every now and then?
Tomi
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-16 16:05 ` Tomi Valkeinen
@ 2013-05-16 16:20 ` Tony Lindgren
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-16 16:20 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Kishon Vijay Abraham I, linux, linux-omap, linux-arm-kernel,
linux-kernel, balbi
* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
> On 16/05/13 18:58, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> >
> > Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> > like the some transceivers should depend on that for omap4.
>
> Yes, I have OCP2SCP=y.
Hmm well no idea beyond that then. Sounds like Kishon should check it.
> >> The musb-hdrc id is wrong on overo also.
> >
> > Hmm has there been a fix posted for that?
>
> I couldn't find with a quick look. We debugged and discussed this on an irc
> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
> The overo fix was just:
>
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index 4ca6b68..a496774 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -472,7 +472,7 @@ static void __init overo_init(void)
> mt46h32m32lf6_sdrc_params);
> board_nand_init(overo_nand_partitions,
> ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
> - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> + usb_bind_phy("musb-hdrc.1.auto", 0, "twl4030_usb");
> usb_musb_init(NULL);
>
> usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
>
>
> Is that ID "randomly" chosen? Doesn't that mean that it'll just get broken
> every now and then?
Yes if so it's not a good solution. For omap4 we'll be flipping over to
be device tree only for v3.11, but that still leaves earlier omaps to
worry about.
I'll wait for a proper patch for the above for the -rc series after we
hear from Kishon.
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-16 16:20 ` Tony Lindgren
0 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-16 16:20 UTC (permalink / raw)
To: linux-arm-kernel
* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
> On 16/05/13 18:58, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> >
> > Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> > like the some transceivers should depend on that for omap4.
>
> Yes, I have OCP2SCP=y.
Hmm well no idea beyond that then. Sounds like Kishon should check it.
> >> The musb-hdrc id is wrong on overo also.
> >
> > Hmm has there been a fix posted for that?
>
> I couldn't find with a quick look. We debugged and discussed this on an irc
> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
> The overo fix was just:
>
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index 4ca6b68..a496774 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -472,7 +472,7 @@ static void __init overo_init(void)
> mt46h32m32lf6_sdrc_params);
> board_nand_init(overo_nand_partitions,
> ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
> - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
> + usb_bind_phy("musb-hdrc.1.auto", 0, "twl4030_usb");
> usb_musb_init(NULL);
>
> usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
>
>
> Is that ID "randomly" chosen? Doesn't that mean that it'll just get broken
> every now and then?
Yes if so it's not a good solution. For omap4 we'll be flipping over to
be device tree only for v3.11, but that still leaves earlier omaps to
worry about.
I'll wait for a proper patch for the above for the -rc series after we
hear from Kishon.
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-16 16:20 ` Tony Lindgren
(?)
@ 2013-05-17 5:39 ` Kishon Vijay Abraham I
-1 siblings, 0 replies; 20+ messages in thread
From: Kishon Vijay Abraham I @ 2013-05-17 5:39 UTC (permalink / raw)
To: Tony Lindgren
Cc: Tomi Valkeinen, linux, linux-omap, linux-arm-kernel, linux-kernel, balbi
Hi,
On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
>> On 16/05/13 18:58, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>>>
>>> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
>>> like the some transceivers should depend on that for omap4.
>>
>> Yes, I have OCP2SCP=y.
>
> Hmm well no idea beyond that then. Sounds like Kishon should check it.
>
>>>> The musb-hdrc id is wrong on overo also.
>>>
>>> Hmm has there been a fix posted for that?
>>
>> I couldn't find with a quick look. We debugged and discussed this on an irc
>> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
>> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
>> The overo fix was just:
hmm.. I think using device name to bind the controller and the phy can
no longer be used reliably. I think it's better to have something like
what Grant suggested in my other patch series.. to have the phy
reference into the host controllers platform_data structure. And for the
phy reference I'll have label and id.
Does this makes sense to you?
Thanks
Kishon
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-17 5:39 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 20+ messages in thread
From: Kishon Vijay Abraham I @ 2013-05-17 5:39 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
>> On 16/05/13 18:58, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>>>
>>> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
>>> like the some transceivers should depend on that for omap4.
>>
>> Yes, I have OCP2SCP=y.
>
> Hmm well no idea beyond that then. Sounds like Kishon should check it.
>
>>>> The musb-hdrc id is wrong on overo also.
>>>
>>> Hmm has there been a fix posted for that?
>>
>> I couldn't find with a quick look. We debugged and discussed this on an irc
>> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
>> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
>> The overo fix was just:
hmm.. I think using device name to bind the controller and the phy can
no longer be used reliably. I think it's better to have something like
what Grant suggested in my other patch series.. to have the phy
reference into the host controllers platform_data structure. And for the
phy reference I'll have label and id.
Does this makes sense to you?
Thanks
Kishon
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-17 5:39 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 20+ messages in thread
From: Kishon Vijay Abraham I @ 2013-05-17 5:39 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux, linux-kernel, balbi, Tomi Valkeinen, linux-omap, linux-arm-kernel
Hi,
On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
>> On 16/05/13 18:58, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>>>
>>> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
>>> like the some transceivers should depend on that for omap4.
>>
>> Yes, I have OCP2SCP=y.
>
> Hmm well no idea beyond that then. Sounds like Kishon should check it.
>
>>>> The musb-hdrc id is wrong on overo also.
>>>
>>> Hmm has there been a fix posted for that?
>>
>> I couldn't find with a quick look. We debugged and discussed this on an irc
>> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
>> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
>> The overo fix was just:
hmm.. I think using device name to bind the controller and the phy can
no longer be used reliably. I think it's better to have something like
what Grant suggested in my other patch series.. to have the phy
reference into the host controllers platform_data structure. And for the
phy reference I'll have label and id.
Does this makes sense to you?
Thanks
Kishon
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-17 5:39 ` Kishon Vijay Abraham I
@ 2013-05-17 17:23 ` Tony Lindgren
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-17 17:23 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Tomi Valkeinen, linux, linux-omap, linux-arm-kernel, linux-kernel, balbi
* Kishon Vijay Abraham I <kishon@ti.com> [130516 22:45]:
> Hi,
>
> On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
> >* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
> >>On 16/05/13 18:58, Tony Lindgren wrote:
> >>>* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> >>>
> >>>Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> >>>like the some transceivers should depend on that for omap4.
> >>
> >>Yes, I have OCP2SCP=y.
> >
> >Hmm well no idea beyond that then. Sounds like Kishon should check it.
> >
> >>>>The musb-hdrc id is wrong on overo also.
> >>>
> >>>Hmm has there been a fix posted for that?
> >>
> >>I couldn't find with a quick look. We debugged and discussed this on an irc
> >>channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
> >>on overo fixed the issue, and it looks very similar to the error on 4430sdp.
> >>The overo fix was just:
>
> hmm.. I think using device name to bind the controller and the phy
> can no longer be used reliably. I think it's better to have
> something like what Grant suggested in my other patch series.. to
> have the phy reference into the host controllers platform_data
> structure. And for the phy reference I'll have label and id.
>
> Does this makes sense to you?
Sounds OK to me, but I guess that would be for v3.11. I think we
still need a fix for at least overo for v3.10?
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-17 17:23 ` Tony Lindgren
0 siblings, 0 replies; 20+ messages in thread
From: Tony Lindgren @ 2013-05-17 17:23 UTC (permalink / raw)
To: linux-arm-kernel
* Kishon Vijay Abraham I <kishon@ti.com> [130516 22:45]:
> Hi,
>
> On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
> >* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
> >>On 16/05/13 18:58, Tony Lindgren wrote:
> >>>* Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
> >>>
> >>>Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
> >>>like the some transceivers should depend on that for omap4.
> >>
> >>Yes, I have OCP2SCP=y.
> >
> >Hmm well no idea beyond that then. Sounds like Kishon should check it.
> >
> >>>>The musb-hdrc id is wrong on overo also.
> >>>
> >>>Hmm has there been a fix posted for that?
> >>
> >>I couldn't find with a quick look. We debugged and discussed this on an irc
> >>channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
> >>on overo fixed the issue, and it looks very similar to the error on 4430sdp.
> >>The overo fix was just:
>
> hmm.. I think using device name to bind the controller and the phy
> can no longer be used reliably. I think it's better to have
> something like what Grant suggested in my other patch series.. to
> have the phy reference into the host controllers platform_data
> structure. And for the phy reference I'll have label and id.
>
> Does this makes sense to you?
Sounds OK to me, but I guess that would be for v3.11. I think we
still need a fix for at least overo for v3.10?
Regards,
Tony
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
2013-05-17 17:23 ` Tony Lindgren
@ 2013-05-21 12:08 ` Florian Vaussard
-1 siblings, 0 replies; 20+ messages in thread
From: Florian Vaussard @ 2013-05-21 12:08 UTC (permalink / raw)
To: Tony Lindgren
Cc: Kishon Vijay Abraham I, Tomi Valkeinen, linux, linux-omap,
linux-arm-kernel, linux-kernel, balbi
On 05/17/2013 07:23 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@ti.com> [130516 22:45]:
>> Hi,
>>
>> On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
>>>> On 16/05/13 18:58, Tony Lindgren wrote:
>>>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>>>>>
>>>>> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
>>>>> like the some transceivers should depend on that for omap4.
>>>>
>>>> Yes, I have OCP2SCP=y.
>>>
>>> Hmm well no idea beyond that then. Sounds like Kishon should check it.
>>>
>>>>>> The musb-hdrc id is wrong on overo also.
>>>>>
>>>>> Hmm has there been a fix posted for that?
>>>>
>>>> I couldn't find with a quick look. We debugged and discussed this on an irc
>>>> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
>>>> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
>>>> The overo fix was just:
>>
>> hmm.. I think using device name to bind the controller and the phy
>> can no longer be used reliably. I think it's better to have
>> something like what Grant suggested in my other patch series.. to
>> have the phy reference into the host controllers platform_data
>> structure. And for the phy reference I'll have label and id.
>>
>> Does this makes sense to you?
>
> Sounds OK to me, but I guess that would be for v3.11. I think we
> still need a fix for at least overo for v3.10?
>
Indead, musb-hdrc is broken on overo with 3.10-rc2. The patch posted in this
thread fixes the issue.
Regards,
Florian
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH] ARM: OMAP4: change the device names in usb_bind_phy
@ 2013-05-21 12:08 ` Florian Vaussard
0 siblings, 0 replies; 20+ messages in thread
From: Florian Vaussard @ 2013-05-21 12:08 UTC (permalink / raw)
To: linux-arm-kernel
On 05/17/2013 07:23 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@ti.com> [130516 22:45]:
>> Hi,
>>
>> On Thursday 16 May 2013 09:50 PM, Tony Lindgren wrote:
>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130516 09:11]:
>>>> On 16/05/13 18:58, Tony Lindgren wrote:
>>>>> * Tomi Valkeinen <tomi.valkeinen@iki.fi> [130515 03:59]:
>>>>>
>>>>> Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
>>>>> like the some transceivers should depend on that for omap4.
>>>>
>>>> Yes, I have OCP2SCP=y.
>>>
>>> Hmm well no idea beyond that then. Sounds like Kishon should check it.
>>>
>>>>>> The musb-hdrc id is wrong on overo also.
>>>>>
>>>>> Hmm has there been a fix posted for that?
>>>>
>>>> I couldn't find with a quick look. We debugged and discussed this on an irc
>>>> channel with Kishon, who said he'll send a patch. Changing the musb-hdrc ID
>>>> on overo fixed the issue, and it looks very similar to the error on 4430sdp.
>>>> The overo fix was just:
>>
>> hmm.. I think using device name to bind the controller and the phy
>> can no longer be used reliably. I think it's better to have
>> something like what Grant suggested in my other patch series.. to
>> have the phy reference into the host controllers platform_data
>> structure. And for the phy reference I'll have label and id.
>>
>> Does this makes sense to you?
>
> Sounds OK to me, but I guess that would be for v3.11. I think we
> still need a fix for at least overo for v3.10?
>
Indead, musb-hdrc is broken on overo with 3.10-rc2. The patch posted in this
thread fixes the issue.
Regards,
Florian
^ permalink raw reply [flat|nested] 20+ messages in thread