* [U-Boot] pull request: u-boot-arm/master
@ 2013-07-10 20:33 Albert ARIBAUD
2013-07-12 12:12 ` [U-Boot] UPDATED: " Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-07-10 20:33 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
fbf87b1823dd5ebc2a384711ea2c677543019ece:
arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 630aacb0859c6e26b2b0311d8e245da5e5b8ac67:
Merge branch 'u-boot-samsung/master' into
'u-boot-arm/master' (2013-07-10 20:40:47 +0200)
----------------------------------------------------------------
Ajay Kumar (1):
video: exynos_fb: Add the missing #else clause
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Amar (2):
EXYNOS5: I2C: Add FDT and non-FDT support for I2C
EXYNOS: Resolve the i2c compilation error
Axel Lin (3):
gpio: s3c2440_gpio: Fix wrong writel arguments
gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on
OMAP5
Bernie Thompson (1):
exynos: Adjust the starting MIF voltage to 1.05v
Dirk Behme (2):
spi: mxc_spi: Fix pre and post divider calculation
spi: mxc_spi: Update pre and post divider algorithm
Eric Nelson (1):
dwc_ahsata: Allow use with dcache enabled
Fabio Estevam (8):
README: mx28_common: Keep the text within 80 columns
README: mx28_common: Do not hardcode the SSP port
README: mx28_common: Fix structure of sentence
README: mxs: Introduce README.mxs
mx28evk: Move README file inside board directory
m28evk: Move README file inside board directory
MAINTAINERS: Add an entry to the mx6q wandboard variant
video: mxsfb: Break the line in videomode message
Ilya Ledvich (1):
am33xx: fix the ddr_cmdtctrl structure
Lokesh Vutla (1):
ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
Michael Trimarchi (1):
usb: omap: ulpi: fix ulpi transceiver access
Mike Dunn (5):
pxa: add support for palmtreo680 board
pxa: palmtreo680 flash programming utility
pxa: turn icache off in cpu_init_crit()
pxa: use -mcpu=xscale compiler option
pxa: fix memory coherency problem after relocation
Minkyu Kang (1):
arm: exynos: fix clock calculation
Otavio Salvador (2):
vf610twr: Add default environment in line with other Freescale
boards vf610twr: Remove SoC name from U-Boot prompt
Pierre Aubert (3):
imx6: fix GPR2 wrong definition
imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
imx: Add support for the SabreSD shipped with i.MX6DL
Rajeshwari Shinde (9):
EXYNOS5: FDT: Add compatible strings for Serial
EXYNOS5: FDT: Add serial device node values
S5P: Serial: Add fdt support to driver
CONFIG: EXYNOS5: Enable silent console
SMDK5250: Remove reduntant code
EXYNOS: Add API for power reset and exit wakeup
EXYNOS: LDS file move to common
EXYNOS4210: Configure GPIO for uart
EXYNOS: Move files from board/samsung to arch/arm
Robert Winkler (4):
imx: nitrogen6x: Enabled data cache
imx: nitrogen6x: Enable bootz
imx: nitrogen6x: Enable raw initrd
imx: nitrogen6x: Enable filesystem generic commands
Simon Glass (1):
exynos: Enable mmc for snow
Tapani Utriainen (1):
Add support for Wandboard Quad
trem (2):
mx27: add function enable_caches
mx27: add i2c clock
?ukasz Majewski (2):
arm:trats: Increase malloc pool size (for DFU ext4 transfers)
power:bat:trats: Break battery charging with ctrl+C
CREDITS | 4 +
MAINTAINERS | 7 +-
arch/arm/cpu/arm926ejs/mx27/generic.c | 10 +
arch/arm/cpu/armv7/exynos/Makefile | 17 +-
arch/arm/cpu/armv7/exynos/clock.c | 43 +-
.../arm/cpu/armv7/exynos}/clock_init.h | 0
arch/arm/cpu/armv7/exynos/clock_init_exynos4.c | 95 ++
.../arm/cpu/armv7/exynos/clock_init_exynos5.c | 56 +-
arch/arm/cpu/armv7/exynos/common_setup.h | 45 +
.../arm/cpu/armv7/exynos}/dmc_common.c | 7 +-
.../arm/cpu/armv7/exynos}/dmc_init_ddr3.c | 27 +-
arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c | 213 +++
.../arm/cpu/armv7/exynos/exynos4_setup.h | 397 +++--
.../arm/cpu/armv7/exynos/exynos5_setup.h | 28 +-
arch/arm/cpu/armv7/exynos/lowlevel_init.c | 73 +
arch/arm/cpu/armv7/exynos/pinmux.c | 40 +
arch/arm/cpu/armv7/exynos/power.c | 50 +
.../arm/cpu/armv7/exynos}/spl_boot.c | 84 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 3 +
arch/arm/cpu/armv7/omap5/hw_data.c | 2 +
arch/arm/cpu/armv7/omap5/hwinit.c | 4 +-
arch/arm/cpu/pxa/config.mk | 2 +-
arch/arm/cpu/pxa/start.S | 3 +-
arch/arm/dts/exynos5250.dtsi | 27 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 1 -
arch/arm/include/asm/arch-am33xx/gpio.h | 2 +
arch/arm/include/asm/arch-exynos/cpu.h | 13 +-
arch/arm/include/asm/arch-exynos/power.h | 12 +
arch/arm/include/asm/arch-exynos/spl.h | 1 +
arch/arm/include/asm/arch-mx27/clock.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 1591
+++++++++++++++++++-
arch/arm/include/asm/arch-omap3/gpio.h | 2 +
arch/arm/include/asm/arch-omap4/gpio.h | 2 +
arch/arm/include/asm/arch-omap5/gpio.h | 4 +
arch/arm/lib/relocate.S | 9 +
doc/README.m28 => board/denx/m28evk/README | 4
+- .../freescale/mx28evk/README | 3
+- .../freescale/{mx6qsabresd => mx6sabresd}/Makefile | 2
+- .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c} | 7 +-
board/palmtreo680/Makefile | 34 +
board/palmtreo680/README | 581 +++++++
board/palmtreo680/palmtreo680.c | 148
++ .../exynos-uboot-spl.lds} | 0
board/samsung/dts/exynos5250-smdk5250.dts | 2 +
board/samsung/dts/exynos5250-snow.dts | 26 +
board/samsung/origen/Makefile | 11 +-
board/samsung/origen/lowlevel_init.S | 357 -----
board/samsung/origen/mem_setup.S | 421 ------
board/samsung/origen/mmc_boot.c | 58 -
board/samsung/origen/origen.c | 46 +
board/samsung/smdk5250/Makefile | 14 +-
board/samsung/smdk5250/smdk5250.c | 12 +-
board/samsung/smdkv310/Makefile | 10 +-
board/samsung/smdkv310/lowlevel_init.S | 414 -----
board/samsung/smdkv310/mem_setup.S | 365 -----
board/samsung/smdkv310/mmc_boot.c | 60 -
board/samsung/smdkv310/smdkv310.c | 46 +
board/wandboard/README | 5 +
board/wandboard/wandboard.c | 2 +-
boards.cfg | 7 +-
doc/README.mx28_common | 75 +-
drivers/block/dwc_ahsata.c | 34 +-
drivers/gpio/omap_gpio.c | 2 +-
drivers/gpio/s3c2440_gpio.c | 6 +-
drivers/gpio/s5p_gpio.c | 9 +-
drivers/i2c/s3c24x0_i2c.c | 3 +-
drivers/power/battery/bat_trats.c | 13 +-
drivers/power/power_core.c | 3 +-
drivers/serial/serial_s5p.c | 78 +
drivers/spi/mxc_spi.c | 28 +-
drivers/usb/ulpi/omap-ulpi-viewport.c | 42 +-
drivers/video/exynos_fimd.c | 3 +-
drivers/video/mxsfb.c | 2 +-
include/configs/exynos5250-dt.h | 12 +-
include/configs/mx6qsabreauto.h | 2
+- .../{mx6qsabre_common.h => mx6sabre_common.h} | 1 -
include/configs/{mx6qsabresd.h => mx6sabresd.h} | 2 +-
include/configs/nitrogen6x.h | 6 +-
include/configs/origen.h | 9 +-
include/configs/palmtreo680.h | 286 ++++
include/configs/smdkv310.h | 8 +-
include/configs/trats.h | 2 +-
include/configs/vf610twr.h | 93 +-
include/configs/wandboard.h | 2 +
include/fdtdec.h | 1 +
include/power/max77686_pmic.h | 2 +
lib/fdtdec.c | 1 +
tools/palmtreo680/flash_u-boot.c | 177 +++ 89 files
changed, 4243 insertions(+), 2171 deletions(-) rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/clock_init.h
(100%) create mode 100644
arch/arm/cpu/armv7/exynos/clock_init_exynos4.c rename
board/samsung/smdk5250/clock_init.c =>
arch/arm/cpu/armv7/exynos/clock_init_exynos5.c (94%) create mode
100644 arch/arm/cpu/armv7/exynos/common_setup.h rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_common.c
(97%) rename {board/samsung/smdk5250 =>
arch/arm/cpu/armv7/exynos}/dmc_init_ddr3.c (92%) create mode 100644
arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c rename
board/samsung/origen/origen_setup.h =>
arch/arm/cpu/armv7/exynos/exynos4_setup.h (65%) rename
board/samsung/smdk5250/setup.h =>
arch/arm/cpu/armv7/exynos/exynos5_setup.h (96%) create mode 100644
arch/arm/cpu/armv7/exynos/lowlevel_init.c rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/spl_boot.c (73%)
rename doc/README.m28 => board/denx/m28evk/README (75%) rename
doc/README.mx28evk => board/freescale/mx28evk/README (93%) rename
board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%) rename
board/freescale/{mx6qsabresd/mx6qsabresd.c => mx6sabresd/mx6sabresd.c}
(98%) create mode 100644 board/palmtreo680/Makefile create mode 100644
board/palmtreo680/README create mode 100644
board/palmtreo680/palmtreo680.c rename
board/samsung/{smdk5250/smdk5250-uboot-spl.lds =>
common/exynos-uboot-spl.lds} (100%) delete mode 100644
board/samsung/origen/lowlevel_init.S delete mode 100644
board/samsung/origen/mem_setup.S delete mode 100644
board/samsung/origen/mmc_boot.c delete mode 100644
board/samsung/smdkv310/lowlevel_init.S delete mode 100644
board/samsung/smdkv310/mem_setup.S delete mode 100644
board/samsung/smdkv310/mmc_boot.c rename
include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%) rename
include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%) create mode
100644 include/configs/palmtreo680.h create mode 100644
tools/palmtreo680/flash_u-boot.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] UPDATED: pull request: u-boot-arm/master
2013-07-10 20:33 [U-Boot] pull request: u-boot-arm/master Albert ARIBAUD
@ 2013-07-12 12:12 ` Albert ARIBAUD
2013-07-12 21:24 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-07-12 12:12 UTC (permalink / raw)
To: u-boot
Hello Tom,
Update to my previous PR, to include the last Tegra and IMX PRs:
The following changes since commit
fbf87b1823dd5ebc2a384711ea2c677543019ece:
arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to efc284e32503b240dbd35c6e8b8d098d702b4be7:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-07-12
13:20:35 +0200)
----------------------------------------------------------------
Ajay Kumar (1):
video: exynos_fb: Add the missing #else clause
Albert ARIBAUD (3):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Amar (2):
EXYNOS5: I2C: Add FDT and non-FDT support for I2C
EXYNOS: Resolve the i2c compilation error
Axel Lin (3):
gpio: s3c2440_gpio: Fix wrong writel arguments
gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on
OMAP5
Bernie Thompson (1):
exynos: Adjust the starting MIF voltage to 1.05v
Dirk Behme (2):
spi: mxc_spi: Fix pre and post divider calculation
spi: mxc_spi: Update pre and post divider algorithm
Eric Nelson (1):
dwc_ahsata: Allow use with dcache enabled
Fabio Estevam (8):
README: mx28_common: Keep the text within 80 columns
README: mx28_common: Do not hardcode the SSP port
README: mx28_common: Fix structure of sentence
README: mxs: Introduce README.mxs
mx28evk: Move README file inside board directory
m28evk: Move README file inside board directory
MAINTAINERS: Add an entry to the mx6q wandboard variant
video: mxsfb: Break the line in videomode message
Ilya Ledvich (1):
am33xx: fix the ddr_cmdtctrl structure
Jim Lin (3):
ARM: Tegra: FDT: Add USB EHCI function for T30/T114
ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Tegra: Config: Enable Tegra30/Tegra114 USB function
Lokesh Vutla (1):
ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
Marek Vasut (3):
m28evk: add trimffs to nand command
net: fec: Remove bogus flush_dcache_range() call
net: fec: Avoid MX28 bus sync issue
Michael Trimarchi (1):
usb: omap: ulpi: fix ulpi transceiver access
Mike Dunn (5):
pxa: add support for palmtreo680 board
pxa: palmtreo680 flash programming utility
pxa: turn icache off in cpu_init_crit()
pxa: use -mcpu=xscale compiler option
pxa: fix memory coherency problem after relocation
Minkyu Kang (1):
arm: exynos: fix clock calculation
Otavio Salvador (8):
vf610twr: Add default environment in line with other Freescale
boards vf610twr: Remove SoC name from U-Boot prompt
mx53loco: Change default environment to cope with OE changes
mx6qsabrelite: Change default environment to cope with OE changes
mx6slevk: Change default environment to cope with OE changes
wandboard: Change default environment to cope with OE changes
mx51evk: Change default environment to cope with OE changes
mx53ard: Change default environment to cope with OE changes
Pierre Aubert (3):
imx6: fix GPR2 wrong definition
imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
imx: Add support for the SabreSD shipped with i.MX6DL
Rajeshwari Shinde (9):
EXYNOS5: FDT: Add compatible strings for Serial
EXYNOS5: FDT: Add serial device node values
S5P: Serial: Add fdt support to driver
CONFIG: EXYNOS5: Enable silent console
SMDK5250: Remove reduntant code
EXYNOS: Add API for power reset and exit wakeup
EXYNOS: LDS file move to common
EXYNOS4210: Configure GPIO for uart
EXYNOS: Move files from board/samsung to arch/arm
Robert Winkler (4):
imx: nitrogen6x: Enabled data cache
imx: nitrogen6x: Enable bootz
imx: nitrogen6x: Enable raw initrd
imx: nitrogen6x: Enable filesystem generic commands
Simon Glass (1):
exynos: Enable mmc for snow
Stephen Warren (2):
ARM: tegra: enable LCD panel on Harmony
ARM: tegra: enable LCD panel on Ventana
Tapani Utriainen (1):
Add support for Wandboard Quad
trem (2):
mx27: add function enable_caches
mx27: add i2c clock
?ukasz Majewski (2):
arm:trats: Increase malloc pool size (for DFU ext4 transfers)
power:bat:trats: Break battery charging with ctrl+C
CREDITS | 4 +
MAINTAINERS | 7 +-
arch/arm/cpu/arm926ejs/mx27/generic.c | 10 +
arch/arm/cpu/armv7/exynos/Makefile | 17 +-
arch/arm/cpu/armv7/exynos/clock.c | 43 +-
.../arm/cpu/armv7/exynos}/clock_init.h | 0
arch/arm/cpu/armv7/exynos/clock_init_exynos4.c | 95 ++
.../arm/cpu/armv7/exynos/clock_init_exynos5.c | 56 +-
arch/arm/cpu/armv7/exynos/common_setup.h | 45 +
.../arm/cpu/armv7/exynos}/dmc_common.c | 7 +-
.../arm/cpu/armv7/exynos}/dmc_init_ddr3.c | 27 +-
arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c | 213 +++
.../arm/cpu/armv7/exynos/exynos4_setup.h | 397 +++--
.../arm/cpu/armv7/exynos/exynos5_setup.h | 28 +-
arch/arm/cpu/armv7/exynos/lowlevel_init.c | 73 +
arch/arm/cpu/armv7/exynos/pinmux.c | 40 +
arch/arm/cpu/armv7/exynos/power.c | 50 +
.../arm/cpu/armv7/exynos}/spl_boot.c | 84 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 3 +
arch/arm/cpu/armv7/omap5/hw_data.c | 2 +
arch/arm/cpu/armv7/omap5/hwinit.c | 4 +-
arch/arm/cpu/pxa/config.mk | 2 +-
arch/arm/cpu/pxa/start.S | 3 +-
arch/arm/dts/exynos5250.dtsi | 27 +
arch/arm/dts/tegra114.dtsi | 27 +
arch/arm/dts/tegra30.dtsi | 27 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 1 -
arch/arm/include/asm/arch-am33xx/gpio.h | 2 +
arch/arm/include/asm/arch-exynos/cpu.h | 13 +-
arch/arm/include/asm/arch-exynos/power.h | 12 +
arch/arm/include/asm/arch-exynos/spl.h | 1 +
arch/arm/include/asm/arch-mx27/clock.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 1591
+++++++++++++++++++-
arch/arm/include/asm/arch-omap3/gpio.h | 2 +
arch/arm/include/asm/arch-omap4/gpio.h | 2 +
arch/arm/include/asm/arch-omap5/gpio.h | 4 +
arch/arm/include/asm/arch-tegra/clk_rst.h | 10 +
arch/arm/include/asm/arch-tegra/usb.h | 182 +--
arch/arm/include/asm/arch-tegra114/usb.h | 156 ++
arch/arm/include/asm/arch-tegra20/usb.h | 155 ++
arch/arm/include/asm/arch-tegra30/usb.h | 168 +++
arch/arm/lib/relocate.S | 9 +
doc/README.m28 => board/denx/m28evk/README | 4
+- .../freescale/mx28evk/README | 3
+- .../freescale/{mx6qsabresd => mx6sabresd}/Makefile | 2
+- .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c} | 7 +-
board/nvidia/common/board.c | 1 +
board/nvidia/dts/tegra114-dalmore.dts | 7 +
board/nvidia/dts/tegra20-harmony.dts | 32 +
board/nvidia/dts/tegra20-ventana.dts | 32 +
board/nvidia/dts/tegra30-beaver.dts | 6 +
board/nvidia/dts/tegra30-cardhu.dts | 6 +
board/nvidia/harmony/harmony.c | 7 +
board/palmtreo680/Makefile | 34 +
board/palmtreo680/README | 581 +++++++
board/palmtreo680/palmtreo680.c | 148
++ .../exynos-uboot-spl.lds} | 0
board/samsung/dts/exynos5250-smdk5250.dts | 2 +
board/samsung/dts/exynos5250-snow.dts | 26 +
board/samsung/origen/Makefile | 11 +-
board/samsung/origen/lowlevel_init.S | 357 -----
board/samsung/origen/mem_setup.S | 421 ------
board/samsung/origen/mmc_boot.c | 58 -
board/samsung/origen/origen.c | 46 +
board/samsung/smdk5250/Makefile | 14 +-
board/samsung/smdk5250/smdk5250.c | 12 +-
board/samsung/smdkv310/Makefile | 10 +-
board/samsung/smdkv310/lowlevel_init.S | 414 -----
board/samsung/smdkv310/mem_setup.S | 365 -----
board/samsung/smdkv310/mmc_boot.c | 60 -
board/samsung/smdkv310/smdkv310.c | 46 +
board/wandboard/README | 5 +
board/wandboard/wandboard.c | 2 +-
boards.cfg | 7 +-
doc/README.mx28_common | 75 +-
drivers/block/dwc_ahsata.c | 34 +-
drivers/gpio/omap_gpio.c | 2 +-
drivers/gpio/s3c2440_gpio.c | 6 +-
drivers/gpio/s5p_gpio.c | 9 +-
drivers/i2c/s3c24x0_i2c.c | 3 +-
drivers/net/fec_mxc.c | 23 +-
drivers/power/battery/bat_trats.c | 13 +-
drivers/power/power_core.c | 3 +-
drivers/serial/serial_s5p.c | 78 +
drivers/spi/mxc_spi.c | 28 +-
drivers/usb/host/ehci-tegra.c | 304 +++-
drivers/usb/ulpi/omap-ulpi-viewport.c | 42 +-
drivers/video/exynos_fimd.c | 3 +-
drivers/video/mxsfb.c | 2 +-
include/configs/beaver.h | 14 +
include/configs/cardhu.h | 14 +
include/configs/dalmore.h | 14 +
include/configs/exynos5250-dt.h | 12 +-
include/configs/harmony.h | 9 +
include/configs/m28evk.h | 1 +
include/configs/mx51evk.h | 4 +-
include/configs/mx53ard.h | 4 +-
include/configs/mx53loco.h | 4 +-
include/configs/mx6qsabreauto.h | 2 +-
include/configs/mx6qsabrelite.h | 4
+- .../{mx6qsabre_common.h => mx6sabre_common.h} | 1 -
include/configs/{mx6qsabresd.h => mx6sabresd.h} | 2 +-
include/configs/mx6slevk.h | 4 +-
include/configs/nitrogen6x.h | 6 +-
include/configs/origen.h | 9 +-
include/configs/palmtreo680.h | 286 ++++
include/configs/smdkv310.h | 8 +-
include/configs/tegra114-common.h | 3 +
include/configs/tegra30-common.h | 3 +
include/configs/trats.h | 2 +-
include/configs/ventana.h | 9 +
include/configs/vf610twr.h | 93 +-
include/configs/wandboard.h | 6 +-
include/fdtdec.h | 3 +
include/power/max77686_pmic.h | 2 +
lib/fdtdec.c | 3 +
tools/palmtreo680/flash_u-boot.c | 177 +++ 118
files changed, 5293 insertions(+), 2359 deletions(-) rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/clock_init.h
(100%) create mode 100644
arch/arm/cpu/armv7/exynos/clock_init_exynos4.c rename
board/samsung/smdk5250/clock_init.c =>
arch/arm/cpu/armv7/exynos/clock_init_exynos5.c (94%) create mode
100644 arch/arm/cpu/armv7/exynos/common_setup.h rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_common.c
(97%) rename {board/samsung/smdk5250 =>
arch/arm/cpu/armv7/exynos}/dmc_init_ddr3.c (92%) create mode 100644
arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c rename
board/samsung/origen/origen_setup.h =>
arch/arm/cpu/armv7/exynos/exynos4_setup.h (65%) rename
board/samsung/smdk5250/setup.h =>
arch/arm/cpu/armv7/exynos/exynos5_setup.h (96%) create mode 100644
arch/arm/cpu/armv7/exynos/lowlevel_init.c rename
{board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/spl_boot.c (73%)
create mode 100644 arch/arm/include/asm/arch-tegra114/usb.h create
mode 100644 arch/arm/include/asm/arch-tegra20/usb.h create mode 100644
arch/arm/include/asm/arch-tegra30/usb.h rename doc/README.m28 =>
board/denx/m28evk/README (75%) rename doc/README.mx28evk =>
board/freescale/mx28evk/README (93%) rename
board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%) rename
board/freescale/{mx6qsabresd/mx6qsabresd.c => mx6sabresd/mx6sabresd.c}
(98%) create mode 100644 board/palmtreo680/Makefile create mode 100644
board/palmtreo680/README create mode 100644
board/palmtreo680/palmtreo680.c rename
board/samsung/{smdk5250/smdk5250-uboot-spl.lds =>
common/exynos-uboot-spl.lds} (100%) delete mode 100644
board/samsung/origen/lowlevel_init.S delete mode 100644
board/samsung/origen/mem_setup.S delete mode 100644
board/samsung/origen/mmc_boot.c delete mode 100644
board/samsung/smdkv310/lowlevel_init.S delete mode 100644
board/samsung/smdkv310/mem_setup.S delete mode 100644
board/samsung/smdkv310/mmc_boot.c rename
include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%) rename
include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%) create mode
100644 include/configs/palmtreo680.h create mode 100644
tools/palmtreo680/flash_u-boot.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] UPDATED: pull request: u-boot-arm/master
2013-07-12 12:12 ` [U-Boot] UPDATED: " Albert ARIBAUD
@ 2013-07-12 21:24 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-07-12 21:24 UTC (permalink / raw)
To: u-boot
On Fri, Jul 12, 2013 at 02:12:20PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> Update to my previous PR, to include the last Tegra and IMX PRs:
>
> The following changes since commit
> fbf87b1823dd5ebc2a384711ea2c677543019ece:
>
> arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to efc284e32503b240dbd35c6e8b8d098d702b4be7:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-07-12
> 13:20:35 +0200)
>
> ----------------------------------------------------------------
>
> Ajay Kumar (1):
> video: exynos_fb: Add the missing #else clause
>
> Albert ARIBAUD (3):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Amar (2):
> EXYNOS5: I2C: Add FDT and non-FDT support for I2C
> EXYNOS: Resolve the i2c compilation error
>
> Axel Lin (3):
> gpio: s3c2440_gpio: Fix wrong writel arguments
> gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
> ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on
> OMAP5
>
> Bernie Thompson (1):
> exynos: Adjust the starting MIF voltage to 1.05v
>
> Dirk Behme (2):
> spi: mxc_spi: Fix pre and post divider calculation
> spi: mxc_spi: Update pre and post divider algorithm
>
> Eric Nelson (1):
> dwc_ahsata: Allow use with dcache enabled
>
> Fabio Estevam (8):
> README: mx28_common: Keep the text within 80 columns
> README: mx28_common: Do not hardcode the SSP port
> README: mx28_common: Fix structure of sentence
> README: mxs: Introduce README.mxs
> mx28evk: Move README file inside board directory
> m28evk: Move README file inside board directory
> MAINTAINERS: Add an entry to the mx6q wandboard variant
> video: mxsfb: Break the line in videomode message
>
> Ilya Ledvich (1):
> am33xx: fix the ddr_cmdtctrl structure
>
> Jim Lin (3):
> ARM: Tegra: FDT: Add USB EHCI function for T30/T114
> ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
> Tegra: Config: Enable Tegra30/Tegra114 USB function
>
> Lokesh Vutla (1):
> ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
>
> Marek Vasut (3):
> m28evk: add trimffs to nand command
> net: fec: Remove bogus flush_dcache_range() call
> net: fec: Avoid MX28 bus sync issue
>
> Michael Trimarchi (1):
> usb: omap: ulpi: fix ulpi transceiver access
>
> Mike Dunn (5):
> pxa: add support for palmtreo680 board
> pxa: palmtreo680 flash programming utility
> pxa: turn icache off in cpu_init_crit()
> pxa: use -mcpu=xscale compiler option
> pxa: fix memory coherency problem after relocation
>
> Minkyu Kang (1):
> arm: exynos: fix clock calculation
>
> Otavio Salvador (8):
> vf610twr: Add default environment in line with other Freescale
> boards vf610twr: Remove SoC name from U-Boot prompt
> mx53loco: Change default environment to cope with OE changes
> mx6qsabrelite: Change default environment to cope with OE changes
> mx6slevk: Change default environment to cope with OE changes
> wandboard: Change default environment to cope with OE changes
> mx51evk: Change default environment to cope with OE changes
> mx53ard: Change default environment to cope with OE changes
>
> Pierre Aubert (3):
> imx6: fix GPR2 wrong definition
> imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
> imx: Add support for the SabreSD shipped with i.MX6DL
>
> Rajeshwari Shinde (9):
> EXYNOS5: FDT: Add compatible strings for Serial
> EXYNOS5: FDT: Add serial device node values
> S5P: Serial: Add fdt support to driver
> CONFIG: EXYNOS5: Enable silent console
> SMDK5250: Remove reduntant code
> EXYNOS: Add API for power reset and exit wakeup
> EXYNOS: LDS file move to common
> EXYNOS4210: Configure GPIO for uart
> EXYNOS: Move files from board/samsung to arch/arm
>
> Robert Winkler (4):
> imx: nitrogen6x: Enabled data cache
> imx: nitrogen6x: Enable bootz
> imx: nitrogen6x: Enable raw initrd
> imx: nitrogen6x: Enable filesystem generic commands
>
> Simon Glass (1):
> exynos: Enable mmc for snow
>
> Stephen Warren (2):
> ARM: tegra: enable LCD panel on Harmony
> ARM: tegra: enable LCD panel on Ventana
>
> Tapani Utriainen (1):
> Add support for Wandboard Quad
>
> trem (2):
> mx27: add function enable_caches
> mx27: add i2c clock
>
> ??ukasz Majewski (2):
> arm:trats: Increase malloc pool size (for DFU ext4 transfers)
> power:bat:trats: Break battery charging with ctrl+C
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130712/e1e1a6ae/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2016-01-31 20:40 [U-Boot] Pull " Albert ARIBAUD
@ 2016-02-01 16:54 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2016-02-01 16:54 UTC (permalink / raw)
To: u-boot
On Sun, Jan 31, 2016 at 09:40:04PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit 8cdae1dacde7dbe74d53a8ac1a05761a53c4f191:
>
> video: Correct 'tor' typo in comment (2016-01-30 10:58:47 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 735b1a2e5a61401868bb35702b6e5e18bce6eb97:
>
> arm: novena: Fix EEPROM i2c configuration (2016-01-31 16:32:56 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160201/804f090d/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2016-01-31 20:40 Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2016-01-31 20:40 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 8cdae1dacde7dbe74d53a8ac1a05761a53c4f191:
video: Correct 'tor' typo in comment (2016-01-30 10:58:47 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 735b1a2e5a61401868bb35702b6e5e18bce6eb97:
arm: novena: Fix EEPROM i2c configuration (2016-01-31 16:32:56 +0100)
----------------------------------------------------------------
Albert ARIBAUD (1):
armv7: add cacheline sizes where missing
Marek Vasut (4):
arm: Replace test for CONFIG_ARMV7 with CONFIG_CPU_V7
arm: Remove S bit from MMU section entry
arm: cache: Implement cache range check for v7
arm: novena: Fix EEPROM i2c configuration
Peng Fan (1):
arm: config: enforce -fno-pic for gcc
Wang Dongsheng (1):
ARM: Disable "DISCARD" for secure section if CONFIG_ARMV7_SECURE_BASE isn't defined
arch/arm/config.mk | 1 +
arch/arm/cpu/armv7/cache_v7.c | 21 +++++++++++++++++++++
arch/arm/cpu/u-boot.lds | 27 ++++++++++++++-------------
arch/arm/include/asm/system.h | 7 +++----
arch/arm/lib/cache-cp15.c | 2 +-
include/configs/am3517_crane.h | 2 ++
include/configs/am3517_evm.h | 2 ++
include/configs/at91-sama5_common.h | 2 ++
include/configs/bcm_ep_board.h | 1 +
include/configs/cm_t35.h | 2 ++
include/configs/cm_t3517.h | 2 ++
include/configs/colibri_vf.h | 2 ++
include/configs/kzm9g.h | 2 ++
include/configs/nokia_rx51.h | 2 ++
include/configs/novena.h | 3 ++-
include/configs/pcm052.h | 2 ++
include/configs/rcar-gen2-common.h | 2 ++
include/configs/rk3036_common.h | 2 ++
include/configs/rk3288_common.h | 2 ++
include/configs/s5p_goni.h | 2 ++
include/configs/smdkc100.h | 2 ++
include/configs/tao3530.h | 2 ++
include/configs/ti814x_evm.h | 2 ++
include/configs/ti816x_evm.h | 2 ++
include/configs/ti_omap3_common.h | 5 +++++
include/configs/tricorder.h | 2 ++
include/configs/vexpress_common.h | 2 ++
include/configs/vf610twr.h | 2 ++
28 files changed, 88 insertions(+), 19 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-11-10 17:45 Albert ARIBAUD
@ 2015-11-10 20:15 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2015-11-10 20:15 UTC (permalink / raw)
To: u-boot
On Tue, Nov 10, 2015 at 06:45:40PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit e490ad25eb3dc4f075ed33b4b00b1f97071fcf3d:
>
> ARM64: zynqmp: Sync zynq_sdhci_init() declaration (2015-11-07 08:17:54 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 5e68ff3949a3eebf62ba639171814f39c8e46a84:
>
> ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhere (2015-11-10 18:04:30 +0100)
>
> Note that OpenRD builds but will fail to run with gcc 5.2.1 due to this
> version of GCC interacting badly with arch_setup_gd(). This is a known
> issue which we have at least two solutions for, either reverting commit
> 5ba534d2 or polishing http://patchwork.ozlabs.org/patch/542076/ and
> applying it; in any case, that will be sorted out before v2016.01.
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151110/10deaa7a/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-11-10 17:45 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit e490ad25eb3dc4f075ed33b4b00b1f97071fcf3d:
ARM64: zynqmp: Sync zynq_sdhci_init() declaration (2015-11-07 08:17:54 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 5e68ff3949a3eebf62ba639171814f39c8e46a84:
ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhere (2015-11-10 18:04:30 +0100)
Note that OpenRD builds but will fail to run with gcc 5.2.1 due to this
version of GCC interacting badly with arch_setup_gd(). This is a known
issue which we have at least two solutions for, either reverting commit
5ba534d2 or polishing http://patchwork.ozlabs.org/patch/542076/ and
applying it; in any case, that will be sorted out before v2016.01.
----------------------------------------------------------------
Albert ARIBAUD (5):
stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
tricorder: switch to CONFIG_SYS_THUMB_BUILD
kirkwood: support CONFIG_SYS_THUMB_BUILD
Revive OpenRD targets
Fabio Estevam (1):
ls1043ardb: Add missing config entries to MAINTAINERS
Stephen Warren (4):
armv8: enable compilation with CONFIG_SYS_NONCACHED_MEMORY
armv8: allow custom MMU setup routines on ARMv8
ARM: tegra: add custom MMU setup on ARMv8
ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhere
Tom Rini (1):
board/ti: Update MAINTAINERS entries with more boards
Vadzim Dambrouski (4):
arm: add support for semihosting for ARMv7M targets
arm: fix compile warnings when semihosting is enabled on ARMv7M target.
arm: stm32f4: fix a bug when only first sector gets erased
arm: stm32f4: fix a bug when a random sector gets erased
Makefile | 2 ++
arch/arm/Kconfig | 5 ++++
arch/arm/cpu/arm926ejs/Makefile | 11 +++++++++
arch/arm/cpu/arm926ejs/cache.c | 5 ++++
arch/arm/cpu/armv7m/stm32f4/flash.c | 5 +++-
arch/arm/cpu/armv8/cache_v8.c | 2 +-
arch/arm/include/asm/arch-stm32f4/stm32.h | 1 +
arch/arm/include/asm/cache.h | 4 +++
arch/arm/include/asm/system.h | 11 +++++----
arch/arm/lib/Makefile | 24 ++++++++++++++++++
arch/arm/lib/cache.c | 11 +++++++++
arch/arm/lib/memcpy.S | 4 +--
arch/arm/lib/memset.S | 2 +-
arch/arm/lib/semihosting.c | 6 +++--
arch/arm/mach-kirkwood/Kconfig | 4 +++
arch/arm/mach-kirkwood/Makefile | 6 +++++
arch/arm/mach-orion5x/Makefile | 10 ++++++++
arch/arm/mach-tegra/Makefile | 1 +
arch/arm/mach-tegra/arm64-mmu.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/thumb1/include/asm/proc-armv/system.h | 69 +++++++++++++++++++++++++++++++++++++++++++++++++++
board/Marvell/openrd/Kconfig | 12 +++++++++
board/Marvell/openrd/MAINTAINERS | 12 +++++++++
board/Marvell/openrd/Makefile | 14 +++++++++++
board/Marvell/openrd/kwbimage.cfg | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/Marvell/openrd/openrd.c | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/Marvell/openrd/openrd.h | 30 ++++++++++++++++++++++
board/freescale/ls1043ardb/MAINTAINERS | 2 ++
board/ti/am335x/MAINTAINERS | 1 +
board/ti/am43xx/MAINTAINERS | 2 ++
board/ti/dra7xx/MAINTAINERS | 2 ++
configs/openrd_base_defconfig | 7 ++++++
configs/openrd_client_defconfig | 7 ++++++
configs/openrd_ultimate_defconfig | 7 ++++++
doc/README.scrapyard | 3 ---
examples/standalone/Makefile | 10 ++++++++
include/configs/openrd.h | 138 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/stm32f429-discovery.h | 1 +
include/configs/tegra-common-post.h | 2 --
include/configs/tricorder.h | 1 +
39 files changed, 860 insertions(+), 17 deletions(-)
create mode 100644 arch/arm/mach-tegra/arm64-mmu.c
create mode 100644 arch/arm/thumb1/include/asm/proc-armv/system.h
create mode 100644 board/Marvell/openrd/Kconfig
create mode 100644 board/Marvell/openrd/MAINTAINERS
create mode 100644 board/Marvell/openrd/Makefile
create mode 100644 board/Marvell/openrd/kwbimage.cfg
create mode 100644 board/Marvell/openrd/openrd.c
create mode 100644 board/Marvell/openrd/openrd.h
create mode 100644 configs/openrd_base_defconfig
create mode 100644 configs/openrd_client_defconfig
create mode 100644 configs/openrd_ultimate_defconfig
create mode 100644 include/configs/openrd.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-10-15 21:19 Albert ARIBAUD
@ 2015-10-15 22:00 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2015-10-15 22:00 UTC (permalink / raw)
To: u-boot
On Thu, Oct 15, 2015 at 11:19:58PM +0200, Albert ARIBAUD wrote:
> Hello,
>
> The following changes since commit 297faccca2235e359012118495b9b73451d54bb9:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2015-10-13 08:37:38 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b1964c72bdb9ca44de3a56d40927409b8cab2a76:
>
> armv8/gic: Fix GIC v2 initialization (2015-10-15 14:47:03 +0200)
>
> These are all trivial changes or bugfixes.
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151015/b2e8dcf5/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-10-15 21:19 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit 297faccca2235e359012118495b9b73451d54bb9:
Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2015-10-13 08:37:38 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to b1964c72bdb9ca44de3a56d40927409b8cab2a76:
armv8/gic: Fix GIC v2 initialization (2015-10-15 14:47:03 +0200)
These are all trivial changes or bugfixes.
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge remote-tracking branch 'u-boot/master'
Peng Fan (1):
arm: armv8 correct value passed to __asm_dcache_all
Simon Glass (1):
arm: Correct comments in crt0.S for the recent SPL improvements
Thierry Reding (3):
armv8/mmu: Clean up TCR programming
armv8/mmu: Set bits marked RES1 in TCR
armv8/gic: Fix GIC v2 initialization
arch/arm/cpu/armv8/cache.S | 2 +-
arch/arm/cpu/armv8/cache_v8.c | 6 +++---
arch/arm/include/asm/armv8/mmu.h | 8 ++++++--
arch/arm/lib/crt0.S | 26 ++++++++++++++++----------
arch/arm/lib/crt0_64.S | 30 ++++++++++++++++++++----------
arch/arm/lib/gic_64.S | 10 +++++++++-
6 files changed, 55 insertions(+), 27 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-31 1:06 Albert ARIBAUD
@ 2015-08-01 14:47 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2015-08-01 14:47 UTC (permalink / raw)
To: u-boot
On Fri, Jul 31, 2015 at 03:06:49AM +0200, Albert ARIBAUD wrote:
> Hello,
>
> The following changes since commit cc35734358540a1bbaf042fdf9f4cb2de17389ed:
>
> Merge branch 'master' of git://git.denx.de/u-boot-tegra (2015-07-29 18:58:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to dad17fd51027ad02ac8f02deed186d08109d61fd:
>
> armv8: caches: Added routine to set non cacheable region (2015-07-31 01:38:12 +0200)
>
> This is just so that the patch below enters mainline to unblock other patches.
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150801/27a5cea5/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-31 1:06 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit cc35734358540a1bbaf042fdf9f4cb2de17389ed:
Merge branch 'master' of git://git.denx.de/u-boot-tegra (2015-07-29 18:58:39 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to dad17fd51027ad02ac8f02deed186d08109d61fd:
armv8: caches: Added routine to set non cacheable region (2015-07-31 01:38:12 +0200)
This is just so that the patch below enters mainline to unblock other patches.
----------------------------------------------------------------
Siva Durga Prasad Paladugu (1):
armv8: caches: Added routine to set non cacheable region
arch/arm/cpu/armv8/cache_v8.c | 36 ++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/system.h | 29 +++++++++++++++++++----------
2 files changed, 55 insertions(+), 10 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
@ 2015-07-07 10:01 ` Albert ARIBAUD
1 sibling, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-07 10:01 UTC (permalink / raw)
To: u-boot
Hello Tom,
On Mon, 6 Jul 2015 19:59:20 -0400, Tom Rini <trini@konsulko.com> wrote:
> On Tue, Jul 07, 2015 at 12:09:49AM +0200, Albert ARIBAUD wrote:
> With ELDK-5.5:
ELDK 5.5.3, default target of armv7a-hf?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-06 23:59 ` Tom Rini
@ 2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
1 sibling, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-07 5:49 UTC (permalink / raw)
To: u-boot
Hello Tom,
On Mon, 6 Jul 2015 19:59:20 -0400, Tom Rini <trini@konsulko.com> wrote:
> On Tue, Jul 07, 2015 at 12:09:49AM +0200, Albert ARIBAUD wrote:
> > Hello Tom,
> >
> > On Mon, 6 Jul 2015 17:15:49 -0400, Tom Rini <trini@konsulko.com> wrote:
> > > On Mon, Jul 06, 2015 at 05:20:02PM +0200, Albert ARIBAUD wrote:
> > >
> > > > Hello Tom,
> > > >
> > > > The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
> > > >
> > > > Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
> > > >
> > > > are available in the git repository at:
> > > >
> > > > git://git.denx.de/u-boot-arm master
> > > >
> > > > for you to fetch changes up to 5d2f3ad37aa91ce5ebba108c0b1112db08ff8498:
> > > >
> > > > openrd: switch to CONFIG_SYS_THUMB_BUILD (2015-07-06 13:49:35 +0200)
> > > >
> > > > This ARM PR supersedes the previous one and adds the thumb-1 support
> > > > series which fixes axm, taurus, and stm32f429-discovery WRT Commit
> > > > ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally').
> > > >
> > > > ----------------------------------------------------------------
> > > > Albert ARIBAUD (5):
> > > > Merge branch 'u-boot/master' into 'u-boot-arm/master'
> > > > stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
> > > > arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
> > > > kirkwood: support CONFIG_SYS_THUMB_BUILD
> > > > openrd: switch to CONFIG_SYS_THUMB_BUILD
> > >
> > > OK, I jsut checked my local build results and it looks like this didn't
> > > get pushed out really? I don't have the thumb fixes so a bunch of
> > > things are still breaking, same as before. And I don't see those
> > > commits.. :(
> >
> > Argh. Fixed. Now I'll go and hide in shame for, say, 6 hours.
>
> With ELDK-5.5:
> (venice2,seaboard,nyan-big,jetson-tk1) arm-linux-gnueabi-ld.bfd: SPL
> image plus BSS too big
> (axm,taurus) arm-linux-gnueabi-ld.bfd: SPL image too big
> And also:
> (openrd_base,openrd_ultimate,openrd_client) arm-linux-gnueabi-ld.bfd:
> error:
> /opt/eldk-5.5.3/armv7a-hf/sysroots/armv7ahf-vfp-neon-linux-gnueabi/usr/lib/arm-linux-gnueabi/4.8.1/libgcc.a(_muldi3.o)
> uses VFP register arguments, u-boot does not
>
> I think we need to push off the memcpy/memset (and related thumb bits)
> until the new MW.
Agreed. I'll respin my master branch w/o these.
> --
> Tom
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-06 22:09 ` Albert ARIBAUD
@ 2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
0 siblings, 2 replies; 261+ messages in thread
From: Tom Rini @ 2015-07-06 23:59 UTC (permalink / raw)
To: u-boot
On Tue, Jul 07, 2015 at 12:09:49AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> On Mon, 6 Jul 2015 17:15:49 -0400, Tom Rini <trini@konsulko.com> wrote:
> > On Mon, Jul 06, 2015 at 05:20:02PM +0200, Albert ARIBAUD wrote:
> >
> > > Hello Tom,
> > >
> > > The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
> > >
> > > Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
> > >
> > > are available in the git repository at:
> > >
> > > git://git.denx.de/u-boot-arm master
> > >
> > > for you to fetch changes up to 5d2f3ad37aa91ce5ebba108c0b1112db08ff8498:
> > >
> > > openrd: switch to CONFIG_SYS_THUMB_BUILD (2015-07-06 13:49:35 +0200)
> > >
> > > This ARM PR supersedes the previous one and adds the thumb-1 support
> > > series which fixes axm, taurus, and stm32f429-discovery WRT Commit
> > > ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally').
> > >
> > > ----------------------------------------------------------------
> > > Albert ARIBAUD (5):
> > > Merge branch 'u-boot/master' into 'u-boot-arm/master'
> > > stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
> > > arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
> > > kirkwood: support CONFIG_SYS_THUMB_BUILD
> > > openrd: switch to CONFIG_SYS_THUMB_BUILD
> >
> > OK, I jsut checked my local build results and it looks like this didn't
> > get pushed out really? I don't have the thumb fixes so a bunch of
> > things are still breaking, same as before. And I don't see those
> > commits.. :(
>
> Argh. Fixed. Now I'll go and hide in shame for, say, 6 hours.
With ELDK-5.5:
(venice2,seaboard,nyan-big,jetson-tk1) arm-linux-gnueabi-ld.bfd: SPL
image plus BSS too big
(axm,taurus) arm-linux-gnueabi-ld.bfd: SPL image too big
And also:
(openrd_base,openrd_ultimate,openrd_client) arm-linux-gnueabi-ld.bfd:
error:
/opt/eldk-5.5.3/armv7a-hf/sysroots/armv7ahf-vfp-neon-linux-gnueabi/usr/lib/arm-linux-gnueabi/4.8.1/libgcc.a(_muldi3.o)
uses VFP register arguments, u-boot does not
I think we need to push off the memcpy/memset (and related thumb bits)
until the new MW.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150706/5e65e931/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-06 21:15 ` Tom Rini
@ 2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-06 22:09 UTC (permalink / raw)
To: u-boot
Hello Tom,
On Mon, 6 Jul 2015 17:15:49 -0400, Tom Rini <trini@konsulko.com> wrote:
> On Mon, Jul 06, 2015 at 05:20:02PM +0200, Albert ARIBAUD wrote:
>
> > Hello Tom,
> >
> > The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
> >
> > Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to 5d2f3ad37aa91ce5ebba108c0b1112db08ff8498:
> >
> > openrd: switch to CONFIG_SYS_THUMB_BUILD (2015-07-06 13:49:35 +0200)
> >
> > This ARM PR supersedes the previous one and adds the thumb-1 support
> > series which fixes axm, taurus, and stm32f429-discovery WRT Commit
> > ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally').
> >
> > ----------------------------------------------------------------
> > Albert ARIBAUD (5):
> > Merge branch 'u-boot/master' into 'u-boot-arm/master'
> > stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
> > arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
> > kirkwood: support CONFIG_SYS_THUMB_BUILD
> > openrd: switch to CONFIG_SYS_THUMB_BUILD
>
> OK, I jsut checked my local build results and it looks like this didn't
> get pushed out really? I don't have the thumb fixes so a bunch of
> things are still breaking, same as before. And I don't see those
> commits.. :(
Argh. Fixed. Now I'll go and hide in shame for, say, 6 hours.
> --
> Tom
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-06 15:20 Albert ARIBAUD
@ 2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Tom Rini @ 2015-07-06 21:15 UTC (permalink / raw)
To: u-boot
On Mon, Jul 06, 2015 at 05:20:02PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
>
> Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 5d2f3ad37aa91ce5ebba108c0b1112db08ff8498:
>
> openrd: switch to CONFIG_SYS_THUMB_BUILD (2015-07-06 13:49:35 +0200)
>
> This ARM PR supersedes the previous one and adds the thumb-1 support
> series which fixes axm, taurus, and stm32f429-discovery WRT Commit
> ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally').
>
> ----------------------------------------------------------------
> Albert ARIBAUD (5):
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
> arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
> kirkwood: support CONFIG_SYS_THUMB_BUILD
> openrd: switch to CONFIG_SYS_THUMB_BUILD
OK, I jsut checked my local build results and it looks like this didn't
get pushed out really? I don't have the thumb fixes so a bunch of
things are still breaking, same as before. And I don't see those
commits.. :(
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150706/2e948f37/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-06 15:20 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 5d2f3ad37aa91ce5ebba108c0b1112db08ff8498:
openrd: switch to CONFIG_SYS_THUMB_BUILD (2015-07-06 13:49:35 +0200)
This ARM PR supersedes the previous one and adds the thumb-1 support
series which fixes axm, taurus, and stm32f429-discovery WRT Commit
ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally').
----------------------------------------------------------------
Albert ARIBAUD (5):
Merge branch 'u-boot/master' into 'u-boot-arm/master'
stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
kirkwood: support CONFIG_SYS_THUMB_BUILD
openrd: switch to CONFIG_SYS_THUMB_BUILD
Lokesh Vutla (1):
board: am43xx: Add maintainer information
Masahiro Yamada (1):
ARM: disable HAVE_PRIVATE_LIBGCC for ARM64
Pavel Machek (1):
armv7: better comment in start.S
Simon Glass (2):
arm: Add ENTRY/ENDPROC to private libgcc functions
Revert "break build if it would produce broken binary"
Siva Durga Prasad Paladugu (1):
arm: dcc: Add uart dcc support for armv8
Tom Rini (1):
arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally
Yegor Yefremov (1):
board: baltos - add maintainer information
Makefile | 2 ++
arch/Kconfig | 2 +-
arch/arm/Kconfig | 5 +++++
arch/arm/cpu/arm926ejs/Makefile | 11 +++++++++++
arch/arm/cpu/arm926ejs/cache.c | 5 +++++
arch/arm/cpu/armv7/start.S | 7 +++----
arch/arm/include/asm/cache.h | 4 ++++
arch/arm/include/asm/u-boot.h | 4 ----
arch/arm/lib/Makefile | 28 ++++++++++++++++++++++++++--
arch/arm/lib/_ashldi3.S | 6 ++++--
arch/arm/lib/_ashrdi3.S | 6 ++++--
arch/arm/lib/_divsi3.S | 6 ++++--
arch/arm/lib/_lshrdi3.S | 6 ++++--
arch/arm/lib/_modsi3.S | 7 ++++---
arch/arm/lib/_udivsi3.S | 10 ++++++----
arch/arm/lib/_umodsi3.S | 6 ++++--
arch/arm/lib/cache.c | 11 +++++++++++
arch/arm/lib/memcpy.S | 6 +++---
arch/arm/lib/memset.S | 4 ++--
arch/arm/mach-kirkwood/Makefile | 6 ++++++
arch/arm/mach-orion5x/Makefile | 10 ++++++++++
arch/arm/thumb1/include/asm/proc-armv/system.h | 69 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/quipos/cairo/MAINTAINERS | 6 ++++++
board/ti/am43xx/MAINTAINERS | 2 ++
board/vscom/baltos/MAINTAINERS | 6 ++++++
drivers/gpio/lpc32xx_gpio.c | 39 +++++++++++++++++++--------------------
drivers/serial/arm_dcc.c | 16 ++++++++++++++++
examples/api/Makefile | 3 ++-
examples/standalone/Makefile | 10 ++++++++++
include/config_fallbacks.h | 5 +++++
include/configs/openrd.h | 1 +
include/configs/stm32f429-discovery.h | 1 +
scripts/Makefile.lib | 3 ++-
33 files changed, 258 insertions(+), 55 deletions(-)
create mode 100644 arch/arm/thumb1/include/asm/proc-armv/system.h
create mode 100644 board/quipos/cairo/MAINTAINERS
create mode 100644 board/vscom/baltos/MAINTAINERS
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-02 22:55 ` Tom Rini
@ 2015-07-05 14:11 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-05 14:11 UTC (permalink / raw)
To: u-boot
Hello Tom,
On Thu, 2 Jul 2015 18:55:04 -0400, Tom Rini <trini@konsulko.com> wrote:
> On Thu, Jul 02, 2015 at 11:27:20PM +0200, Albert ARIBAUD wrote:
>
> > Hello Tom,
> >
> > The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
> >
> > Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to d6f9f69632754f03d064cc9b302c9e1552249258:
> >
> > arm: dcc: Add uart dcc support for armv8 (2015-07-02 23:24:24 +0200)
> >
> > ----------------------------------------------------------------
> > Albert ARIBAUD (1):
> > Merge branch 'u-boot/master' into 'u-boot-arm/master'
> >
> > Axel Lin (1):
> > gpio: lpc32xx: Use priv_data instead of platdata
> >
> > Pavel Machek (1):
> > armv7: better comment in start.S
> >
> > Simon Glass (2):
> > arm: Add ENTRY/ENDPROC to private libgcc functions
> > Revert "break build if it would produce broken binary"
> >
> > Siva Durga Prasad Paladugu (1):
> > arm: dcc: Add uart dcc support for armv8
> >
> > Tom Rini (1):
> > arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally
>
> I see thumb related breakage on axm, taurus, and stm32f429-discovery
> now. We probably need the patch you posted that forces the right thumb
> mode on arch/arm/lib/mem{set,cpy}.S ?
Sorry for missing that.
Commit ecaf902 ('arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally')
actually broke these boards, and I did not notice it from the buildman
summary. The breaking occurs because of the following:
- taurus and its derivative axm are the only two Thumb-1-only targets
which enable CONFIG_SYS_THUMB_BUILD (for their) SPL; but memset.S and
memcpy.S can only assemble for ARM or Thumb-2, not Thumb-1.
- stm32f429-discovery is the only armV7-m / CPU_V7M (Thumb1 and Thumb2
only) target in U-boot... yet does not define CONFIG_SYS_THUMB_BUILD,
which makes memset.S / memcpy.S assume that they should build for ARM,
not Thumb2; the assembler correctly refuses that.
My thumb patch fixes taurus and axm as it prevents memset.S and memcpy.S
from trying to assemble for Thumb-1, but does not fix stm32f429-discovery,
for which the fix is to properly announce CONFIG_SYS_THUMB_BUILD in the
config header file.
Sending v4 of my Thumb-1 patch ASAP.
> --
> Tom
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-07-02 21:27 Albert ARIBAUD
@ 2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Tom Rini @ 2015-07-02 22:55 UTC (permalink / raw)
To: u-boot
On Thu, Jul 02, 2015 at 11:27:20PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
>
> Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to d6f9f69632754f03d064cc9b302c9e1552249258:
>
> arm: dcc: Add uart dcc support for armv8 (2015-07-02 23:24:24 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Axel Lin (1):
> gpio: lpc32xx: Use priv_data instead of platdata
>
> Pavel Machek (1):
> armv7: better comment in start.S
>
> Simon Glass (2):
> arm: Add ENTRY/ENDPROC to private libgcc functions
> Revert "break build if it would produce broken binary"
>
> Siva Durga Prasad Paladugu (1):
> arm: dcc: Add uart dcc support for armv8
>
> Tom Rini (1):
> arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally
I see thumb related breakage on axm, taurus, and stm32f429-discovery
now. We probably need the patch you posted that forces the right thumb
mode on arch/arm/lib/mem{set,cpy}.S ?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150702/e1cce361/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-07-02 21:27 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd:
Prepare v2015.07-rc3 (2015-06-29 17:22:01 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to d6f9f69632754f03d064cc9b302c9e1552249258:
arm: dcc: Add uart dcc support for armv8 (2015-07-02 23:24:24 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Axel Lin (1):
gpio: lpc32xx: Use priv_data instead of platdata
Pavel Machek (1):
armv7: better comment in start.S
Simon Glass (2):
arm: Add ENTRY/ENDPROC to private libgcc functions
Revert "break build if it would produce broken binary"
Siva Durga Prasad Paladugu (1):
arm: dcc: Add uart dcc support for armv8
Tom Rini (1):
arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally
arch/arm/cpu/armv7/start.S | 7 +++----
arch/arm/include/asm/u-boot.h | 4 ----
arch/arm/lib/Makefile | 4 ++--
arch/arm/lib/_ashldi3.S | 6 ++++--
arch/arm/lib/_ashrdi3.S | 6 ++++--
arch/arm/lib/_divsi3.S | 6 ++++--
arch/arm/lib/_lshrdi3.S | 6 ++++--
arch/arm/lib/_modsi3.S | 7 ++++---
arch/arm/lib/_udivsi3.S | 10 ++++++----
arch/arm/lib/_umodsi3.S | 6 ++++--
arch/arm/lib/memcpy.S | 2 +-
arch/arm/lib/memset.S | 2 +-
drivers/gpio/lpc32xx_gpio.c | 39 +++++++++++++++++++--------------------
drivers/serial/arm_dcc.c | 16 ++++++++++++++++
examples/api/Makefile | 3 ++-
include/config_fallbacks.h | 5 +++++
16 files changed, 79 insertions(+), 50 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-05-05 9:30 Albert ARIBAUD
@ 2015-05-05 23:59 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2015-05-05 23:59 UTC (permalink / raw)
To: u-boot
On Tue, May 05, 2015 at 11:30:11AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
>
> Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze (2015-04-29 06:46:33 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b939689c7b87773c44275a578ffc8674a867e39d:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2015-05-05 10:09:06 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150505/b9ec3698/attachment.sig>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-05-05 9:30 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze (2015-04-29 06:46:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to b939689c7b87773c44275a578ffc8674a867e39d:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2015-05-05 10:09:06 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Alexander Merkle (2):
fix ARM DCC support for ARMv7 based cores (e.g. CortexA)
fix ARM DCC support for ARMv7 based cores (e.g. CortexA)
Bryan Brinsko (1):
ARMv7 TLB: Fixed TTBR0 and Table Descriptors to allow caching
David Feng (1):
Armv8: Initializing CNTVOFF_EL2
Valentine Barshak (1):
ARM: cpu: Add ARMv7 barrier operations support
Vitaly Andrianov (1):
arm: implement find_next_zero_bit function
arch/arm/cpu/armv7/cache_v7.c | 14 +++++++-------
arch/arm/include/asm/armv7.h | 10 ++++++++++
arch/arm/include/asm/bitops.h | 43 ++++++++++++++++++++++++++++++++++++++++---
arch/arm/include/asm/macro.h | 3 +++
arch/arm/include/asm/system.h | 37 +++++++++++++++++++++++++++++++++++++
arch/arm/lib/cache-cp15.c | 14 ++++++++++++++
drivers/serial/arm_dcc.c | 4 ++--
include/configs/zynq-common.h | 1 -
8 files changed, 113 insertions(+), 13 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2015-01-04 18:11 Albert ARIBAUD
@ 2015-01-05 15:10 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2015-01-05 15:10 UTC (permalink / raw)
To: u-boot
On Sun, Jan 04, 2015 at 07:11:42PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit e3bf81b1e841ecabe7c8b3d48621256db8b8623e:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-12-16 15:20:02 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to ed710457a52ff09880af52540c997615adbc91ee:
>
> ARM: Implement non-cached memory support (2014-12-18 21:18:43 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150105/efc57b56/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2015-01-04 18:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit e3bf81b1e841ecabe7c8b3d48621256db8b8623e:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-12-16 15:20:02 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to ed710457a52ff09880af52540c997615adbc91ee:
ARM: Implement non-cached memory support (2014-12-18 21:18:43 +0100)
----------------------------------------------------------------
Thierry Reding (1):
ARM: Implement non-cached memory support
README | 19 +++++++++++++++++++
arch/arm/include/asm/system.h | 5 +++++
arch/arm/lib/cache.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
common/board_r.c | 11 +++++++++++
4 files changed, 79 insertions(+)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-11-24 17:30 Albert ARIBAUD
@ 2014-11-24 22:13 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-11-24 22:13 UTC (permalink / raw)
To: u-boot
On Mon, Nov 24, 2014 at 06:30:25PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit 0d485b9095328cdc81b2ee94ff59b988c69b9127:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2014-11-13 10:35:13 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 8bc347e2ec17bca44b1639a001eeed50d042f0db:
>
> ARM: bootm: Allow booting in secure mode on hyp capable systems (2014-11-24 09:09:52 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141124/0f60ddec/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-11-24 17:30 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit 0d485b9095328cdc81b2ee94ff59b988c69b9127:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2014-11-13 10:35:13 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 8bc347e2ec17bca44b1639a001eeed50d042f0db:
ARM: bootm: Allow booting in secure mode on hyp capable systems (2014-11-24 09:09:52 +0100)
----------------------------------------------------------------
Hans de Goede (2):
ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options
ARM: bootm: Allow booting in secure mode on hyp capable systems
Tom Rini (1):
Kconfig: Add EXPERT option
Kconfig | 8 ++++++++
arch/arm/Kconfig | 4 ++++
arch/arm/cpu/armv7/Kconfig | 34 ++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/exynos/Kconfig | 2 ++
arch/arm/lib/bootm.c | 31 ++++++++++++++++++++++++++-----
board/sunxi/Kconfig | 2 ++
include/configs/arndale.h | 2 --
include/configs/sun7i.h | 2 --
include/configs/vexpress_ca15_tc2.h | 2 --
9 files changed, 76 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/cpu/armv7/Kconfig
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-11-13 7:54 Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2014-11-13 7:54 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 63f7af9a4cfb4a3b9136674c6612c6d13957c2cd:
Merge branch 'master' of git://git.denx.de/u-boot-uniphier (2014-11-11 15:49:10 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 8e59f8bb5b197e346e2d6afb0478cadb8cc5d0b9:
km_arm: convert the km_arm boards to the generic board support (2014-11-12 10:20:40 +0100)
----------------------------------------------------------------
Thierry Reding (3):
ARM: cache_v7: Various minor cleanups
ARM: cache-cp15: Use more accurate types
malloc: Output region when debugging
Valentin Longchamp (1):
km_arm: convert the km_arm boards to the generic board support
arch/arm/cpu/armv7/cache_v7.c | 14 +++++++-------
arch/arm/include/asm/system.h | 2 +-
arch/arm/lib/cache-cp15.c | 6 +++---
common/dlmalloc.c | 3 +++
include/configs/km/km_arm.h | 2 ++
5 files changed, 16 insertions(+), 11 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-11-08 0:07 Albert ARIBAUD
@ 2014-11-10 21:28 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-11-10 21:28 UTC (permalink / raw)
To: u-boot
On Sat, Nov 08, 2014 at 01:07:56AM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit 5b3ee386fde82a1ba42ff09b95247842c9a1585e:
>
> kbuild: clear VENDOR variable to fix build error on tcsh (2014-10-23 16:35:12 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 59a9cfdd16ad7ab14f22697bf1e049c6bea0d3e2:
>
> gic: fixed compilation error in GICv2 wait for interrupt macro (2014-10-28 07:57:31 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141110/584df57f/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-11-08 0:07 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 5b3ee386fde82a1ba42ff09b95247842c9a1585e:
kbuild: clear VENDOR variable to fix build error on tcsh (2014-10-23 16:35:12 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 59a9cfdd16ad7ab14f22697bf1e049c6bea0d3e2:
gic: fixed compilation error in GICv2 wait for interrupt macro (2014-10-28 07:57:31 +0100)
----------------------------------------------------------------
Masahiro Yamada (4):
arm: debug: import debug files from Linux 3.16
arm: debug: replace license blocks with SPDX
arm: debug: add Kconfig entries for lowlevel debug
arm: debug: adjust for U-Boot
Yehuda Yitschak (1):
gic: fixed compilation error in GICv2 wait for interrupt macro
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 64 +++++++++++++++++++++++
arch/arm/include/asm/macro.h | 2 +-
arch/arm/include/debug/8250.S | 52 ++++++++++++++++++
arch/arm/lib/Makefile | 2 +
arch/arm/lib/debug.S | 136 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/serial_reg.h | 388 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 645 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/Kconfig.debug
create mode 100644 arch/arm/include/debug/8250.S
create mode 100644 arch/arm/lib/debug.S
create mode 100644 include/linux/serial_reg.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-10-11 0:38 Albert ARIBAUD
@ 2014-10-11 11:49 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-10-11 11:49 UTC (permalink / raw)
To: u-boot
On Sat, Oct 11, 2014 at 02:38:24AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> db67801bf92f7fae6131dbc0d387131698fb9490:
>
> Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
> (2014-10-10 09:45:16 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 3d420cbd355a5f09e4f113eb10579a264a8ef138:
>
> Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into
> 'u-boot-arm/master' (2014-10-11 01:20:55 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (4):
> Merge remote-tracking branch 'u-boot-imx/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into
> 'u-boot-arm/master'
>
> Andreas Bie?mann (2):
> macb: simplify gmac initialisation
> sama5d3xek: run PHY's config
>
> Andrew Ruder (2):
> arm: mx31: use common timer functions
> arm: mx35: use common timer functions
>
> Bo Shen (1):
> ARM: atmel: switch at91sam9263ek to generic board
>
> Christian Gmeiner (1):
> imx6: add Bachmann OT1200 board
>
> Diego Rondini (1):
> nitrogen6x: config: allow boot to USB stick
>
> Eric Nelson (23):
> nitrogen6x: Update DDR timings for 2G memory arrangement
> nitrogen6x: implement board_cfb_skip() to disable text output
> nitrogen6x: configure SD2 pads for SDIO on USDHC2
> nitrogen6x: power-down miscellanous peripherals
> nitrogen6x: staticize board file
> nitrogen6x: prevent warnings about board_ehci* callbacks
> nitrogen6x: display: add qvga panel
> nitrogen6x: display: add support for LG-9.7 LVDS display
> nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
> nitrogen6x: display: add support for fusion 7 display
> nitrogen6x: display: add svga display (800x600)
> nitrogen6x: display: add Ampire 1024x600 panel
> nitrogen6x: display: add wvga-lvds panel
> nitrogen6x: display use I2C detect for HDMI
> nitrogen6x: config: add USB Mass Storage (ums) support
> nitrogen6x: config: add initrd_high
> nitrogen6x: config: expose SATA, then MMC over USB
> nitrogen6x: config: enable USB keyboard support
> nitrogen6x: config: add CONFIG_CMD_MEMTEST
> nitrogen6x: config: enable "i2c edid"
> nitrogen6x: config: disable logo
> nitrogen6x: config: add gpio command
> nitrogen6x: config: enable Android fastboot
>
> Fabio Estevam (9):
> mx6sxsabresd: Staticize i2c_pad_info1
> mx6qsabreauto: Staticize when possible
> cm_fx6: Remove CONFIG_NETMASK
> mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
> mx51evk: Add generic board support
> mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
> mx25pdk: Add generic board support
> wandboard: Select CONFIG_CMD_FUSE
> mx6sxsabresd: Fix PCI reset and power GPIO assignments
>
> Guillaume GARDET (1):
> imx: nitrogen6x: Make use of both uSD and SD slots to load script
> or kernel on Sabrelite board
>
> Heiko Schocher (1):
> arm, at91: add generic board support for the taurus and corvus
> board
>
> Kevin Mihelich (2):
> nitrogen6x: config: use FS_GENERIC load command
> nitrogen6x: config: enable EXT4 filesystem
>
> Marek Vasut (12):
> usb: ehci: mxs: Add board-specific callbacks
> arm: mxs: Wait when disabling VDDMEM current limiter
> arm: mxs: Wait for DRAM to start
> arm: mxs: olinuxino: Enable USB only when needed
> arm: mxs: olinuxino: Fine-tune DRAM configuration
> arm: m28evk: Test if bootscript exists before loading it
> arm: m53evk: Test if bootscript exists before loading it
> arm: m28evk: Enable FS_GENERIC
> arm: m53evk: Enable FS_GENERIC
> arm: m28evk: Zap superfluous tab in env
> arm: m53evk: Zap superfluous tab in env
> arm: socfpga: Use EMAC1 on SoCDK
>
> Masahiro Yamada (1):
> exynos: update maintainer of Snow and SMDK5420 board
>
> Minkyu Kang (3):
> Revert "odroid: set MPLL clock to 880MHz"
> Merge branch 'master' of http://git.denx.de/u-boot-samsung
> Merge branch 'uboot'
>
> Nikita Kiryanov (1):
> compulab: eeprom: add default eeprom bus
>
> Nitin Garg (3):
> imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
> imx: Support i.MX6 High Assurance Boot authentication
> imx6sx: Fix i.MX6SX HAB api function table offset
>
> Nobuhiro Iwamatsu (11):
> arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ
> arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK
> arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK
> arm: rmobile: koelsch: Update QoS initialization to version 0.334
> arm: rmobile: alt: Update QoS initialization to version 0.11
> arm: rmobile: lager: Update Qos setting to version 0.955
> arm: rmobile: lager: Add Qos setting for ES2
> arm: rmobile: lager: Fix CPU frequency setting
> arm: rmobile: Remove unnecessary initialization for l2ctlr
> arm: rmobile: r8a7791: Fix initialize L2 cache
> arm: rmobile: r8a7794: Skip initialize L2 cache
>
> Pavel Machek (1):
> arm: socfpga: add MAINTAINERS entry
>
> Peng Fan (3):
> imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR
> imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR
> imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR
>
> Przemyslaw Marczak (1):
> odroid: clock: set aclk_cores to 200MHz
>
> Robert Baldyga (1):
> armv7: s5pc1xx: improve cache handling
>
> Robert Winkler (1):
> nitrogen6x: display: add support lvds jeida screen
>
> Simon Glass (15):
> Exynos: Use 900MHz ARM frequency in SPL for peach_pit
> exynos5: Enable data cache
> cros_ec: power: Add a tunnelled version of the tps65090 driver
> cros_ec: exynos: Use the correct tps65090 driver in each case
> dm: exynos: Split out the cros_ec drivers
> exynos: dts: Add device tree node for cros_ec keyboard
> exynos: Rename -dt config files to -common
> exynos: Move common exynos settings into a common file
> exynos: Move common smdk5420 things to common file
> exynos: config: Move cros_ec and tps65090 out of smdk boards
> config: Move arndale to use common exynos5250 file
> config: Move smdkv310 to use common exynos4 file
> samsung: Enable device tree for s5p_goni
> samsung: Enable device tree for smdkc100
> exynos: Enable pre-relocation malloc()
>
> Stefan Agner (2):
> mtd: nand: add Freescale vf610_nfc driver
> arm: vf610: add NAND support for vf610twr
>
> Stefan Roese (1):
> ARM: mx6: gw_ventana: Remove superfluous memset of GD in
> board_init_f
>
> Stefano Babic (3):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> imx: Fix warning by building vf610twr_nand
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> Troy Kisky (4):
> nitrogen6x: simplify board_mmc_getcd
> nitrogen6x: configure SGTL5000, CSI camera clock outputs
> nitrogen6x: phy: add 100 us delay after phy reset
> nitrogen6x: config: allow more bootargs parameters
>
> Ye.Li (6):
> imx: mx6qarm2: Add the kernel FDT Loading support
> imx: mx6qarm2: Change the mmcroot and mmcpart env value
> imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD
> reset usb: ehci-mx6: Rename the USB register base address
> imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
> imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
>
> MAINTAINERS | 7 +
> arch/arm/Kconfig | 17 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 104 +-
> arch/arm/cpu/arm1136/mx35/timer.c | 83 --
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 13 +-
> arch/arm/cpu/armv7/exynos/Kconfig | 1 +
> arch/arm/cpu/armv7/mx6/clock.c | 27 +
> arch/arm/cpu/armv7/mx6/hab.c | 169 ++-
> arch/arm/cpu/armv7/mx6/soc.c | 39 +-
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 22 +-
> arch/arm/cpu/armv7/s5pc1xx/Kconfig | 25 +
> arch/arm/cpu/armv7/s5pc1xx/cache.S | 30 -
> arch/arm/cpu/armv7/s5pc1xx/cache.c | 47 +
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/exynos4210-smdkv310.dts | 21 +
> arch/arm/dts/exynos5420-peach-pit.dts | 57 +-
> arch/arm/dts/s5pc1xx-goni.dts | 28 +
> arch/arm/dts/s5pc1xx-smdkc100.dts | 29 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 10 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 12 +
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/hab.h | 16 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +-
> arch/arm/include/asm/arch-s5pc1xx/periph.h | 61 +
> arch/arm/include/asm/arch-s5pc1xx/pinmux.h | 50 +
> board/atmel/sama5d3xek/sama5d3xek.c | 29 +-
> board/bachmann/ot1200/Kconfig | 23 +
> board/bachmann/ot1200/MAINTAINERS | 6 +
> board/bachmann/ot1200/Makefile | 9 +
> board/bachmann/ot1200/README | 20 +
> .../ddr => bachmann/ot1200}/mx6q_4x_mt41j128.cfg | 0
> board/bachmann/ot1200/ot1200.c | 251 ++++
> board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 24 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 292 ++++-
> board/compulab/common/eeprom.c | 4 +
> board/congatec/cgtqmx6eval/imximage.cfg | 169 +++
> board/freescale/mx6qarm2/MAINTAINERS | 4 +
> board/freescale/mx6qarm2/imximage.cfg | 189 ++-
> board/freescale/mx6qarm2/imximage_mx6dl.cfg | 462 +++++++
> board/freescale/mx6qarm2/mx6qarm2.c | 11 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 +-
> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 +++
> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
> board/freescale/vf610twr/MAINTAINERS | 1 +
> board/freescale/vf610twr/vf610twr.c | 47 +-
> board/gateworks/gw_ventana/gw_ventana_spl.c | 7 -
> board/olimex/mx23_olinuxino/mx23_olinuxino.c | 46 +-
> board/renesas/alt/qos.c | 6 +-
> board/renesas/koelsch/qos.c | 41 +-
> board/renesas/lager/lager.c | 8 +-
> board/renesas/lager/qos.c | 1358
> +++++++++++++++++++-
> board/samsung/odroid/odroid.c | 64 +-
> board/samsung/smdk5250/MAINTAINERS | 2 +-
> board/samsung/smdk5420/MAINTAINERS | 4 -
> configs/cgtqmx6qeval_defconfig | 2 +-
> configs/mx6dlarm2_defconfig | 3 +
> configs/mx6dlarm2_lpddr2_defconfig | 3 +
> configs/mx6qarm2_defconfig | 2 +-
> configs/mx6qarm2_lpddr2_defconfig | 3 +
> configs/mx6qsabresd_defconfig | 2 +-
> configs/ot1200_defconfig | 3 +
> configs/s5p_goni_defconfig | 2 +
> configs/smdkc100_defconfig | 2 +
> configs/smdkv310_defconfig | 1 +
> configs/vf610twr_defconfig | 2 +-
> configs/vf610twr_nand_defconfig | 3 +
> drivers/mmc/s5p_sdhci.c | 2 -
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/vf610_nfc.c | 724 +++++++++++
> drivers/net/macb.c | 25 +-
> drivers/power/pmic/Makefile | 3 +-
> drivers/power/pmic/pmic_tps65090_ec.c | 218 ++++
> drivers/usb/host/ehci-mx6.c | 4 +-
> drivers/usb/host/ehci-mxs.c | 16 +
> include/configs/arndale.h | 195 +--
> include/configs/at91sam9263ek.h | 2 +
> include/configs/cm_fx6.h | 1 -
> include/configs/corvus.h | 2 +
> include/configs/{exynos4-dt.h => exynos-common.h} | 110 +-
> include/configs/exynos4-common.h | 68 +
> include/configs/{exynos5-dt.h => exynos5-common.h} | 126 +-
> include/configs/exynos5-dt-common.h | 35
> + .../{exynos5250-dt.h => exynos5250-common.h} | 7
> +- .../configs/{exynos5420.h => exynos5420-common.h} | 22 +-
> include/configs/koelsch.h | 1 +
> include/configs/lager.h | 3 +-
> include/configs/m28evk.h | 13 +-
> include/configs/m53evk.h | 13 +-
> include/configs/mx25pdk.h | 3 +-
> include/configs/mx51evk.h | 3 +-
> include/configs/mx6qarm2.h | 49 +-
> include/configs/mx6slevk.h | 2 +-
> include/configs/mx6sxsabresd.h | 6 +-
> include/configs/nitrogen6x.h | 113 +-
> include/configs/odroid.h | 4 +-
> include/configs/origen.h | 5 +-
> include/configs/ot1200.h | 197 +++
> include/configs/peach-pit.h | 16 +-
> include/configs/s5p_goni.h | 9 +-
> include/configs/s5pc210_universal.h | 5 +-
> include/configs/smdk5250.h | 23 +-
> include/configs/smdk5420.h | 5 +-
> include/configs/smdkc100.h | 6 +
> include/configs/smdkv310.h | 61 +-
> include/configs/snow.h | 25 +-
> include/configs/socfpga_cyclone5.h | 2 +-
> include/configs/taurus.h | 2 +
> include/configs/trats.h | 6 +-
> include/configs/trats2.h | 6 +-
> include/configs/vf610twr.h | 46 +-
> include/configs/wandboard.h | 5 + 111 files
> changed, 5360 insertions(+), 1003 deletions(-) create mode 100644
> arch/arm/cpu/armv7/s5pc1xx/Kconfig delete mode 100644
> arch/arm/cpu/armv7/s5pc1xx/cache.S create mode 100644
> arch/arm/cpu/armv7/s5pc1xx/cache.c create mode 100644
> arch/arm/dts/exynos4210-smdkv310.dts create mode 100644
> arch/arm/dts/s5pc1xx-goni.dts create mode 100644
> arch/arm/dts/s5pc1xx-smdkc100.dts create mode 100644
> arch/arm/include/asm/arch-s5pc1xx/periph.h create mode 100644
> arch/arm/include/asm/arch-s5pc1xx/pinmux.h create mode 100644
> board/bachmann/ot1200/Kconfig create mode 100644
> board/bachmann/ot1200/MAINTAINERS create mode 100644
> board/bachmann/ot1200/Makefile create mode 100644
> board/bachmann/ot1200/README rename board/{freescale/imx/ddr =>
> bachmann/ot1200}/mx6q_4x_mt41j128.cfg (100%) create mode 100644
> board/bachmann/ot1200/ot1200.c create mode 100644
> board/congatec/cgtqmx6eval/imximage.cfg create mode 100644
> board/freescale/mx6qarm2/imximage_mx6dl.cfg create mode 100644
> board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg create mode 100644
> configs/mx6dlarm2_defconfig create mode 100644
> configs/mx6dlarm2_lpddr2_defconfig create mode 100644
> configs/mx6qarm2_lpddr2_defconfig create mode 100644
> configs/ot1200_defconfig create mode 100644
> configs/vf610twr_nand_defconfig create mode 100644
> drivers/mtd/nand/vf610_nfc.c create mode 100644
> drivers/power/pmic/pmic_tps65090_ec.c rename
> include/configs/{exynos4-dt.h => exynos-common.h} (51%) create mode
> 100644 include/configs/exynos4-common.h rename
> include/configs/{exynos5-dt.h => exynos5-common.h} (64%) create mode
> 100644 include/configs/exynos5-dt-common.h rename
> include/configs/{exynos5250-dt.h => exynos5250-common.h} (88%) rename
> include/configs/{exynos5420.h => exynos5420-common.h} (71%) create
> mode 100644 include/configs/ot1200.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141011/07546aca/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-10-11 0:38 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
db67801bf92f7fae6131dbc0d387131698fb9490:
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
(2014-10-10 09:45:16 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 3d420cbd355a5f09e4f113eb10579a264a8ef138:
Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into
'u-boot-arm/master' (2014-10-11 01:20:55 +0200)
----------------------------------------------------------------
Albert ARIBAUD (4):
Merge remote-tracking branch 'u-boot-imx/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into
'u-boot-arm/master'
Andreas Bie?mann (2):
macb: simplify gmac initialisation
sama5d3xek: run PHY's config
Andrew Ruder (2):
arm: mx31: use common timer functions
arm: mx35: use common timer functions
Bo Shen (1):
ARM: atmel: switch at91sam9263ek to generic board
Christian Gmeiner (1):
imx6: add Bachmann OT1200 board
Diego Rondini (1):
nitrogen6x: config: allow boot to USB stick
Eric Nelson (23):
nitrogen6x: Update DDR timings for 2G memory arrangement
nitrogen6x: implement board_cfb_skip() to disable text output
nitrogen6x: configure SD2 pads for SDIO on USDHC2
nitrogen6x: power-down miscellanous peripherals
nitrogen6x: staticize board file
nitrogen6x: prevent warnings about board_ehci* callbacks
nitrogen6x: display: add qvga panel
nitrogen6x: display: add support for LG-9.7 LVDS display
nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
nitrogen6x: display: add support for fusion 7 display
nitrogen6x: display: add svga display (800x600)
nitrogen6x: display: add Ampire 1024x600 panel
nitrogen6x: display: add wvga-lvds panel
nitrogen6x: display use I2C detect for HDMI
nitrogen6x: config: add USB Mass Storage (ums) support
nitrogen6x: config: add initrd_high
nitrogen6x: config: expose SATA, then MMC over USB
nitrogen6x: config: enable USB keyboard support
nitrogen6x: config: add CONFIG_CMD_MEMTEST
nitrogen6x: config: enable "i2c edid"
nitrogen6x: config: disable logo
nitrogen6x: config: add gpio command
nitrogen6x: config: enable Android fastboot
Fabio Estevam (9):
mx6sxsabresd: Staticize i2c_pad_info1
mx6qsabreauto: Staticize when possible
cm_fx6: Remove CONFIG_NETMASK
mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
mx51evk: Add generic board support
mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR
mx25pdk: Add generic board support
wandboard: Select CONFIG_CMD_FUSE
mx6sxsabresd: Fix PCI reset and power GPIO assignments
Guillaume GARDET (1):
imx: nitrogen6x: Make use of both uSD and SD slots to load script
or kernel on Sabrelite board
Heiko Schocher (1):
arm, at91: add generic board support for the taurus and corvus
board
Kevin Mihelich (2):
nitrogen6x: config: use FS_GENERIC load command
nitrogen6x: config: enable EXT4 filesystem
Marek Vasut (12):
usb: ehci: mxs: Add board-specific callbacks
arm: mxs: Wait when disabling VDDMEM current limiter
arm: mxs: Wait for DRAM to start
arm: mxs: olinuxino: Enable USB only when needed
arm: mxs: olinuxino: Fine-tune DRAM configuration
arm: m28evk: Test if bootscript exists before loading it
arm: m53evk: Test if bootscript exists before loading it
arm: m28evk: Enable FS_GENERIC
arm: m53evk: Enable FS_GENERIC
arm: m28evk: Zap superfluous tab in env
arm: m53evk: Zap superfluous tab in env
arm: socfpga: Use EMAC1 on SoCDK
Masahiro Yamada (1):
exynos: update maintainer of Snow and SMDK5420 board
Minkyu Kang (3):
Revert "odroid: set MPLL clock to 880MHz"
Merge branch 'master' of http://git.denx.de/u-boot-samsung
Merge branch 'uboot'
Nikita Kiryanov (1):
compulab: eeprom: add default eeprom bus
Nitin Garg (3):
imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
imx: Support i.MX6 High Assurance Boot authentication
imx6sx: Fix i.MX6SX HAB api function table offset
Nobuhiro Iwamatsu (11):
arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQ
arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLK
arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLK
arm: rmobile: koelsch: Update QoS initialization to version 0.334
arm: rmobile: alt: Update QoS initialization to version 0.11
arm: rmobile: lager: Update Qos setting to version 0.955
arm: rmobile: lager: Add Qos setting for ES2
arm: rmobile: lager: Fix CPU frequency setting
arm: rmobile: Remove unnecessary initialization for l2ctlr
arm: rmobile: r8a7791: Fix initialize L2 cache
arm: rmobile: r8a7794: Skip initialize L2 cache
Pavel Machek (1):
arm: socfpga: add MAINTAINERS entry
Peng Fan (3):
imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR
imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR
imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR
Przemyslaw Marczak (1):
odroid: clock: set aclk_cores to 200MHz
Robert Baldyga (1):
armv7: s5pc1xx: improve cache handling
Robert Winkler (1):
nitrogen6x: display: add support lvds jeida screen
Simon Glass (15):
Exynos: Use 900MHz ARM frequency in SPL for peach_pit
exynos5: Enable data cache
cros_ec: power: Add a tunnelled version of the tps65090 driver
cros_ec: exynos: Use the correct tps65090 driver in each case
dm: exynos: Split out the cros_ec drivers
exynos: dts: Add device tree node for cros_ec keyboard
exynos: Rename -dt config files to -common
exynos: Move common exynos settings into a common file
exynos: Move common smdk5420 things to common file
exynos: config: Move cros_ec and tps65090 out of smdk boards
config: Move arndale to use common exynos5250 file
config: Move smdkv310 to use common exynos4 file
samsung: Enable device tree for s5p_goni
samsung: Enable device tree for smdkc100
exynos: Enable pre-relocation malloc()
Stefan Agner (2):
mtd: nand: add Freescale vf610_nfc driver
arm: vf610: add NAND support for vf610twr
Stefan Roese (1):
ARM: mx6: gw_ventana: Remove superfluous memset of GD in
board_init_f
Stefano Babic (3):
Merge branch 'master' of git://git.denx.de/u-boot-arm
imx: Fix warning by building vf610twr_nand
Merge branch 'master' of git://git.denx.de/u-boot-arm
Troy Kisky (4):
nitrogen6x: simplify board_mmc_getcd
nitrogen6x: configure SGTL5000, CSI camera clock outputs
nitrogen6x: phy: add 100 us delay after phy reset
nitrogen6x: config: allow more bootargs parameters
Ye.Li (6):
imx: mx6qarm2: Add the kernel FDT Loading support
imx: mx6qarm2: Change the mmcroot and mmcpart env value
imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD
reset usb: ehci-mx6: Rename the USB register base address
imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
MAINTAINERS | 7 +
arch/arm/Kconfig | 17 +-
arch/arm/cpu/arm1136/mx31/timer.c | 104 +-
arch/arm/cpu/arm1136/mx35/timer.c | 83 --
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 13 +-
arch/arm/cpu/armv7/exynos/Kconfig | 1 +
arch/arm/cpu/armv7/mx6/clock.c | 27 +
arch/arm/cpu/armv7/mx6/hab.c | 169 ++-
arch/arm/cpu/armv7/mx6/soc.c | 39 +-
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 22 +-
arch/arm/cpu/armv7/s5pc1xx/Kconfig | 25 +
arch/arm/cpu/armv7/s5pc1xx/cache.S | 30 -
arch/arm/cpu/armv7/s5pc1xx/cache.c | 47 +
arch/arm/dts/Makefile | 3 +
arch/arm/dts/exynos4210-smdkv310.dts | 21 +
arch/arm/dts/exynos5420-peach-pit.dts | 57 +-
arch/arm/dts/s5pc1xx-goni.dts | 28 +
arch/arm/dts/s5pc1xx-smdkc100.dts | 29 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 10 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 12 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/hab.h | 16 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +-
arch/arm/include/asm/arch-s5pc1xx/periph.h | 61 +
arch/arm/include/asm/arch-s5pc1xx/pinmux.h | 50 +
board/atmel/sama5d3xek/sama5d3xek.c | 29 +-
board/bachmann/ot1200/Kconfig | 23 +
board/bachmann/ot1200/MAINTAINERS | 6 +
board/bachmann/ot1200/Makefile | 9 +
board/bachmann/ot1200/README | 20 +
.../ddr => bachmann/ot1200}/mx6q_4x_mt41j128.cfg | 0
board/bachmann/ot1200/ot1200.c | 251 ++++
board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 24 +-
board/boundary/nitrogen6x/nitrogen6x.c | 292 ++++-
board/compulab/common/eeprom.c | 4 +
board/congatec/cgtqmx6eval/imximage.cfg | 169 +++
board/freescale/mx6qarm2/MAINTAINERS | 4 +
board/freescale/mx6qarm2/imximage.cfg | 189 ++-
board/freescale/mx6qarm2/imximage_mx6dl.cfg | 462 +++++++
board/freescale/mx6qarm2/mx6qarm2.c | 11 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 +-
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 +++
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
board/freescale/vf610twr/MAINTAINERS | 1 +
board/freescale/vf610twr/vf610twr.c | 47 +-
board/gateworks/gw_ventana/gw_ventana_spl.c | 7 -
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 46 +-
board/renesas/alt/qos.c | 6 +-
board/renesas/koelsch/qos.c | 41 +-
board/renesas/lager/lager.c | 8 +-
board/renesas/lager/qos.c | 1358
+++++++++++++++++++-
board/samsung/odroid/odroid.c | 64 +-
board/samsung/smdk5250/MAINTAINERS | 2 +-
board/samsung/smdk5420/MAINTAINERS | 4 -
configs/cgtqmx6qeval_defconfig | 2 +-
configs/mx6dlarm2_defconfig | 3 +
configs/mx6dlarm2_lpddr2_defconfig | 3 +
configs/mx6qarm2_defconfig | 2 +-
configs/mx6qarm2_lpddr2_defconfig | 3 +
configs/mx6qsabresd_defconfig | 2 +-
configs/ot1200_defconfig | 3 +
configs/s5p_goni_defconfig | 2 +
configs/smdkc100_defconfig | 2 +
configs/smdkv310_defconfig | 1 +
configs/vf610twr_defconfig | 2 +-
configs/vf610twr_nand_defconfig | 3 +
drivers/mmc/s5p_sdhci.c | 2 -
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/vf610_nfc.c | 724 +++++++++++
drivers/net/macb.c | 25 +-
drivers/power/pmic/Makefile | 3 +-
drivers/power/pmic/pmic_tps65090_ec.c | 218 ++++
drivers/usb/host/ehci-mx6.c | 4 +-
drivers/usb/host/ehci-mxs.c | 16 +
include/configs/arndale.h | 195 +--
include/configs/at91sam9263ek.h | 2 +
include/configs/cm_fx6.h | 1 -
include/configs/corvus.h | 2 +
include/configs/{exynos4-dt.h => exynos-common.h} | 110 +-
include/configs/exynos4-common.h | 68 +
include/configs/{exynos5-dt.h => exynos5-common.h} | 126 +-
include/configs/exynos5-dt-common.h | 35
+ .../{exynos5250-dt.h => exynos5250-common.h} | 7
+- .../configs/{exynos5420.h => exynos5420-common.h} | 22 +-
include/configs/koelsch.h | 1 +
include/configs/lager.h | 3 +-
include/configs/m28evk.h | 13 +-
include/configs/m53evk.h | 13 +-
include/configs/mx25pdk.h | 3 +-
include/configs/mx51evk.h | 3 +-
include/configs/mx6qarm2.h | 49 +-
include/configs/mx6slevk.h | 2 +-
include/configs/mx6sxsabresd.h | 6 +-
include/configs/nitrogen6x.h | 113 +-
include/configs/odroid.h | 4 +-
include/configs/origen.h | 5 +-
include/configs/ot1200.h | 197 +++
include/configs/peach-pit.h | 16 +-
include/configs/s5p_goni.h | 9 +-
include/configs/s5pc210_universal.h | 5 +-
include/configs/smdk5250.h | 23 +-
include/configs/smdk5420.h | 5 +-
include/configs/smdkc100.h | 6 +
include/configs/smdkv310.h | 61 +-
include/configs/snow.h | 25 +-
include/configs/socfpga_cyclone5.h | 2 +-
include/configs/taurus.h | 2 +
include/configs/trats.h | 6 +-
include/configs/trats2.h | 6 +-
include/configs/vf610twr.h | 46 +-
include/configs/wandboard.h | 5 + 111 files
changed, 5360 insertions(+), 1003 deletions(-) create mode 100644
arch/arm/cpu/armv7/s5pc1xx/Kconfig delete mode 100644
arch/arm/cpu/armv7/s5pc1xx/cache.S create mode 100644
arch/arm/cpu/armv7/s5pc1xx/cache.c create mode 100644
arch/arm/dts/exynos4210-smdkv310.dts create mode 100644
arch/arm/dts/s5pc1xx-goni.dts create mode 100644
arch/arm/dts/s5pc1xx-smdkc100.dts create mode 100644
arch/arm/include/asm/arch-s5pc1xx/periph.h create mode 100644
arch/arm/include/asm/arch-s5pc1xx/pinmux.h create mode 100644
board/bachmann/ot1200/Kconfig create mode 100644
board/bachmann/ot1200/MAINTAINERS create mode 100644
board/bachmann/ot1200/Makefile create mode 100644
board/bachmann/ot1200/README rename board/{freescale/imx/ddr =>
bachmann/ot1200}/mx6q_4x_mt41j128.cfg (100%) create mode 100644
board/bachmann/ot1200/ot1200.c create mode 100644
board/congatec/cgtqmx6eval/imximage.cfg create mode 100644
board/freescale/mx6qarm2/imximage_mx6dl.cfg create mode 100644
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg create mode 100644
configs/mx6dlarm2_defconfig create mode 100644
configs/mx6dlarm2_lpddr2_defconfig create mode 100644
configs/mx6qarm2_lpddr2_defconfig create mode 100644
configs/ot1200_defconfig create mode 100644
configs/vf610twr_nand_defconfig create mode 100644
drivers/mtd/nand/vf610_nfc.c create mode 100644
drivers/power/pmic/pmic_tps65090_ec.c rename
include/configs/{exynos4-dt.h => exynos-common.h} (51%) create mode
100644 include/configs/exynos4-common.h rename
include/configs/{exynos5-dt.h => exynos5-common.h} (64%) create mode
100644 include/configs/exynos5-dt-common.h rename
include/configs/{exynos5250-dt.h => exynos5250-common.h} (88%) rename
include/configs/{exynos5420.h => exynos5420-common.h} (71%) create
mode 100644 include/configs/ot1200.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-10-07 11:16 Albert ARIBAUD
@ 2014-10-07 16:02 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-10-07 16:02 UTC (permalink / raw)
To: u-boot
On Tue, Oct 07, 2014 at 01:16:00PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> be9f643ae6aa9044c60fe80e3a2c10be8371c692:
>
> Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26
> 20:10:48 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to c19a8bc5711ec63e905ef91f045a1489f0aa3cb0:
>
> vf610twr: Tune DDR initialization settings (2014-10-07 13:08:31 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'
>
> Anthony Felice (1):
> vf610twr: Tune DDR initialization settings
>
> DrEagle (5):
> ARM: sheevaplug: change env location
> ARM: sheevaplug: add MVSATA driver
> ARM: sheevaplug: add MTD defaults
> ARM: sheevaplug: redefine MTDPARTS
> ARM: sheevaplug: add HUSH parser
>
> Masahiro Yamada (7):
> mtd: denali: add Denali controller configs to Kconfig
> mtd: denali: add Denali NAND driver for SPL
> serial: add UniPhier serial driver
> ARM: UniPhier: add UniPhier SoC support code
> ARM: UniPhier: add Kconfig and defconfig
> MAINTAINERS: add me as a maintainer of UniPhier platform
> git-mailrc: add me as a maintainer of UniPhier platform
>
> Michael Walle (1):
> lsxl: convert to generic board and fix typo
>
> MAINTAINERS | 9 +
> arch/arm/Kconfig | 5 +
> arch/arm/cpu/armv7/uniphier/Kconfig | 32 +
> arch/arm/cpu/armv7/uniphier/Makefile | 23 +
> arch/arm/cpu/armv7/uniphier/board_common.c | 32 +
> arch/arm/cpu/armv7/uniphier/board_late_init.c | 91 ++
> arch/arm/cpu/armv7/uniphier/cache_uniphier.c | 154 +++
> arch/arm/cpu/armv7/uniphier/cmd_pinmon.c | 33 +
> arch/arm/cpu/armv7/uniphier/cpu_info.c | 59 ++
> arch/arm/cpu/armv7/uniphier/dram_init.c | 37 +
> arch/arm/cpu/armv7/uniphier/init_page_table.c | 1068
> ++++++++++++++++++++
> arch/arm/cpu/armv7/uniphier/lowlevel_init.S | 159 +++
> arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 10 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c | 33 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c | 16
> + .../armv7/uniphier/ph1-ld4/board_postclk_init.c | 42 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c | 29 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c | 63 ++
> arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c | 189 ++++
> arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 44 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c | 28 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 162 +++
> arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 10 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c | 16
> + .../armv7/uniphier/ph1-pro4/board_postclk_init.c | 39 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c | 66 ++
> arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 29 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 45 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c | 168
> +++ .../arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c | 18 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 75 ++
> arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 28 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 136 +++
> arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 10 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c | 16
> + .../armv7/uniphier/ph1-sld8/board_postclk_init.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c | 29 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c | 57 ++
> arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c | 201
> ++++ .../arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 51 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c | 142 +++
> arch/arm/cpu/armv7/uniphier/reset.c | 29 +
> arch/arm/cpu/armv7/uniphier/smp.S | 54 +
> arch/arm/cpu/armv7/uniphier/spl.c | 17 +
> arch/arm/cpu/armv7/uniphier/support_card.c | 180 ++++
> arch/arm/cpu/armv7/uniphier/timer.c | 39 +
> arch/arm/include/asm/arch-uniphier/arm-mpcore.h | 46 +
> arch/arm/include/asm/arch-uniphier/bcu-regs.h | 30 +
> arch/arm/include/asm/arch-uniphier/board.h | 35 +
> arch/arm/include/asm/arch-uniphier/boot-device.h | 20 +
> arch/arm/include/asm/arch-uniphier/led.h | 101 ++
> arch/arm/include/asm/arch-uniphier/sbc-regs.h | 108 ++
> arch/arm/include/asm/arch-uniphier/sc-regs.h | 62 ++
> arch/arm/include/asm/arch-uniphier/sg-regs.h | 182 ++++
> arch/arm/include/asm/arch-uniphier/ssc-regs.h | 67 ++
> arch/arm/include/asm/arch-uniphier/umc-regs.h | 119 +++
> arch/arm/include/asm/arch-vf610/imx-regs.h | 49 +-
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 44 +-
> arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
> board/freescale/vf610twr/vf610twr.c | 94 +-
> configs/ph1_ld4_defconfig | 8 +
> configs/ph1_pro4_defconfig | 8 +
> configs/ph1_sld8_defconfig | 8 +
> doc/README.nand | 6 -
> doc/git-mailrc | 1 +
> drivers/mtd/Kconfig | 1 +
> drivers/mtd/nand/Kconfig | 42 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/denali_spl.c | 231 +++++
> drivers/serial/Makefile | 1 +
> drivers/serial/serial.c | 2 +
> drivers/serial/serial_uniphier.c | 204 ++++
> include/configs/lsxl.h | 4 +-
> include/configs/ph1_ld4.h | 59 ++
> include/configs/ph1_pro4.h | 61 ++
> include/configs/ph1_sld8.h | 61 ++
> include/configs/sheevaplug.h | 46 +-
> include/configs/uniphier-common.h | 266 +++++ 84
> files changed, 5675 insertions(+), 74 deletions(-) create mode 100644
> arch/arm/cpu/armv7/uniphier/Kconfig create mode 100644
> arch/arm/cpu/armv7/uniphier/Makefile create mode 100644
> arch/arm/cpu/armv7/uniphier/board_common.c create mode 100644
> arch/arm/cpu/armv7/uniphier/board_late_init.c create mode 100644
> arch/arm/cpu/armv7/uniphier/cache_uniphier.c create mode 100644
> arch/arm/cpu/armv7/uniphier/cmd_pinmon.c create mode 100644
> arch/arm/cpu/armv7/uniphier/cpu_info.c create mode 100644
> arch/arm/cpu/armv7/uniphier/dram_init.c create mode 100644
> arch/arm/cpu/armv7/uniphier/init_page_table.c create mode 100644
> arch/arm/cpu/armv7/uniphier/lowlevel_init.S create mode 100644
> arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile create mode 100644
> arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c create mode 100644
> arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c create mode 100644
> arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c
> create mode 100644
> arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c create mode
> 100644 arch/arm/cpu/armv7/uniphier/reset.c create mode 100644
> arch/arm/cpu/armv7/uniphier/smp.S create mode 100644
> arch/arm/cpu/armv7/uniphier/spl.c create mode 100644
> arch/arm/cpu/armv7/uniphier/support_card.c create mode 100644
> arch/arm/cpu/armv7/uniphier/timer.c create mode 100644
> arch/arm/include/asm/arch-uniphier/arm-mpcore.h create mode 100644
> arch/arm/include/asm/arch-uniphier/bcu-regs.h create mode 100644
> arch/arm/include/asm/arch-uniphier/board.h create mode 100644
> arch/arm/include/asm/arch-uniphier/boot-device.h create mode 100644
> arch/arm/include/asm/arch-uniphier/led.h create mode 100644
> arch/arm/include/asm/arch-uniphier/sbc-regs.h create mode 100644
> arch/arm/include/asm/arch-uniphier/sc-regs.h create mode 100644
> arch/arm/include/asm/arch-uniphier/sg-regs.h create mode 100644
> arch/arm/include/asm/arch-uniphier/ssc-regs.h create mode 100644
> arch/arm/include/asm/arch-uniphier/umc-regs.h create mode 100644
> configs/ph1_ld4_defconfig create mode 100644
> configs/ph1_pro4_defconfig create mode 100644
> configs/ph1_sld8_defconfig create mode 100644 drivers/mtd/nand/Kconfig
> create mode 100644 drivers/mtd/nand/denali_spl.c create mode 100644
> drivers/serial/serial_uniphier.c create mode 100644
> include/configs/ph1_ld4.h create mode 100644 include/configs/ph1_pro4.h
> create mode 100644 include/configs/ph1_sld8.h
> create mode 100644 include/configs/uniphier-common.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141007/7e934a09/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-10-07 11:16 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26
20:10:48 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to c19a8bc5711ec63e905ef91f045a1489f0aa3cb0:
vf610twr: Tune DDR initialization settings (2014-10-07 13:08:31 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'
Anthony Felice (1):
vf610twr: Tune DDR initialization settings
DrEagle (5):
ARM: sheevaplug: change env location
ARM: sheevaplug: add MVSATA driver
ARM: sheevaplug: add MTD defaults
ARM: sheevaplug: redefine MTDPARTS
ARM: sheevaplug: add HUSH parser
Masahiro Yamada (7):
mtd: denali: add Denali controller configs to Kconfig
mtd: denali: add Denali NAND driver for SPL
serial: add UniPhier serial driver
ARM: UniPhier: add UniPhier SoC support code
ARM: UniPhier: add Kconfig and defconfig
MAINTAINERS: add me as a maintainer of UniPhier platform
git-mailrc: add me as a maintainer of UniPhier platform
Michael Walle (1):
lsxl: convert to generic board and fix typo
MAINTAINERS | 9 +
arch/arm/Kconfig | 5 +
arch/arm/cpu/armv7/uniphier/Kconfig | 32 +
arch/arm/cpu/armv7/uniphier/Makefile | 23 +
arch/arm/cpu/armv7/uniphier/board_common.c | 32 +
arch/arm/cpu/armv7/uniphier/board_late_init.c | 91 ++
arch/arm/cpu/armv7/uniphier/cache_uniphier.c | 154 +++
arch/arm/cpu/armv7/uniphier/cmd_pinmon.c | 33 +
arch/arm/cpu/armv7/uniphier/cpu_info.c | 59 ++
arch/arm/cpu/armv7/uniphier/dram_init.c | 37 +
arch/arm/cpu/armv7/uniphier/init_page_table.c | 1068
++++++++++++++++++++
arch/arm/cpu/armv7/uniphier/lowlevel_init.S | 159 +++
arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 10 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c | 33 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c | 16
+ .../armv7/uniphier/ph1-ld4/board_postclk_init.c | 42 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c | 29 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c | 63 ++
arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c | 189 ++++
arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 44 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c | 28 +
arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 162 +++
arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 10 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c | 16
+ .../armv7/uniphier/ph1-pro4/board_postclk_init.c | 39 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c | 66 ++
arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 29 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 45 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c | 168
+++ .../arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c | 18 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 75 ++
arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 28 +
arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 136 +++
arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 10 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c | 16
+ .../armv7/uniphier/ph1-sld8/board_postclk_init.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c | 29 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c | 57 ++
arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c | 201
++++ .../arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 51 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c | 1 +
arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c | 142 +++
arch/arm/cpu/armv7/uniphier/reset.c | 29 +
arch/arm/cpu/armv7/uniphier/smp.S | 54 +
arch/arm/cpu/armv7/uniphier/spl.c | 17 +
arch/arm/cpu/armv7/uniphier/support_card.c | 180 ++++
arch/arm/cpu/armv7/uniphier/timer.c | 39 +
arch/arm/include/asm/arch-uniphier/arm-mpcore.h | 46 +
arch/arm/include/asm/arch-uniphier/bcu-regs.h | 30 +
arch/arm/include/asm/arch-uniphier/board.h | 35 +
arch/arm/include/asm/arch-uniphier/boot-device.h | 20 +
arch/arm/include/asm/arch-uniphier/led.h | 101 ++
arch/arm/include/asm/arch-uniphier/sbc-regs.h | 108 ++
arch/arm/include/asm/arch-uniphier/sc-regs.h | 62 ++
arch/arm/include/asm/arch-uniphier/sg-regs.h | 182 ++++
arch/arm/include/asm/arch-uniphier/ssc-regs.h | 67 ++
arch/arm/include/asm/arch-uniphier/umc-regs.h | 119 +++
arch/arm/include/asm/arch-vf610/imx-regs.h | 49 +-
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 44 +-
arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
board/freescale/vf610twr/vf610twr.c | 94 +-
configs/ph1_ld4_defconfig | 8 +
configs/ph1_pro4_defconfig | 8 +
configs/ph1_sld8_defconfig | 8 +
doc/README.nand | 6 -
doc/git-mailrc | 1 +
drivers/mtd/Kconfig | 1 +
drivers/mtd/nand/Kconfig | 42 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/denali_spl.c | 231 +++++
drivers/serial/Makefile | 1 +
drivers/serial/serial.c | 2 +
drivers/serial/serial_uniphier.c | 204 ++++
include/configs/lsxl.h | 4 +-
include/configs/ph1_ld4.h | 59 ++
include/configs/ph1_pro4.h | 61 ++
include/configs/ph1_sld8.h | 61 ++
include/configs/sheevaplug.h | 46 +-
include/configs/uniphier-common.h | 266 +++++ 84
files changed, 5675 insertions(+), 74 deletions(-) create mode 100644
arch/arm/cpu/armv7/uniphier/Kconfig create mode 100644
arch/arm/cpu/armv7/uniphier/Makefile create mode 100644
arch/arm/cpu/armv7/uniphier/board_common.c create mode 100644
arch/arm/cpu/armv7/uniphier/board_late_init.c create mode 100644
arch/arm/cpu/armv7/uniphier/cache_uniphier.c create mode 100644
arch/arm/cpu/armv7/uniphier/cmd_pinmon.c create mode 100644
arch/arm/cpu/armv7/uniphier/cpu_info.c create mode 100644
arch/arm/cpu/armv7/uniphier/dram_init.c create mode 100644
arch/arm/cpu/armv7/uniphier/init_page_table.c create mode 100644
arch/arm/cpu/armv7/uniphier/lowlevel_init.S create mode 100644
arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile create mode 100644
arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c create mode 100644
arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c create mode 100644
arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/bcu_init.c
create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c
create mode 100644
arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/boot-mode.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_spectrum.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sg_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c create mode
100644 arch/arm/cpu/armv7/uniphier/reset.c create mode 100644
arch/arm/cpu/armv7/uniphier/smp.S create mode 100644
arch/arm/cpu/armv7/uniphier/spl.c create mode 100644
arch/arm/cpu/armv7/uniphier/support_card.c create mode 100644
arch/arm/cpu/armv7/uniphier/timer.c create mode 100644
arch/arm/include/asm/arch-uniphier/arm-mpcore.h create mode 100644
arch/arm/include/asm/arch-uniphier/bcu-regs.h create mode 100644
arch/arm/include/asm/arch-uniphier/board.h create mode 100644
arch/arm/include/asm/arch-uniphier/boot-device.h create mode 100644
arch/arm/include/asm/arch-uniphier/led.h create mode 100644
arch/arm/include/asm/arch-uniphier/sbc-regs.h create mode 100644
arch/arm/include/asm/arch-uniphier/sc-regs.h create mode 100644
arch/arm/include/asm/arch-uniphier/sg-regs.h create mode 100644
arch/arm/include/asm/arch-uniphier/ssc-regs.h create mode 100644
arch/arm/include/asm/arch-uniphier/umc-regs.h create mode 100644
configs/ph1_ld4_defconfig create mode 100644
configs/ph1_pro4_defconfig create mode 100644
configs/ph1_sld8_defconfig create mode 100644 drivers/mtd/nand/Kconfig
create mode 100644 drivers/mtd/nand/denali_spl.c create mode 100644
drivers/serial/serial_uniphier.c create mode 100644
include/configs/ph1_ld4.h create mode 100644 include/configs/ph1_pro4.h
create mode 100644 include/configs/ph1_sld8.h
create mode 100644 include/configs/uniphier-common.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-09-17 21:40 Albert ARIBAUD
@ 2014-09-18 1:00 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-09-18 1:00 UTC (permalink / raw)
To: u-boot
On Wed, Sep 17, 2014 at 11:40:43PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> a7f99bf139b3aaa0d5494693fd0395084355e41a:
>
> arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG (2014-09-11 18:04:39
> +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to c292adae170fa8c27dca75963bdb0a9afc640e57:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2014-09-17
> 23:35:34 +0200)
>
> NOTE: two boards are broken by this PR, trimslice and cm_fx6, due to
> commits in the imx tree depending on some commits in the spi tree. Once
> both this PR and the spi commits are in, both boards should build fine
> again.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (1):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Fabio Estevam (9):
> net: fec_mxc: Adjust RX DMA alignment for mx6solox
> net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
> tools: imximage: Fix the maximum DCD size for mx53/mx6
> mx6dlsabresd: Use its own DCD table
> mx6qsabreauto: Remove imx6q-sabreauto.dts
> mx6: imx-regs: Provide a structure for GPC registers
> pcie_imx: Add mx6solox support
> mx6sxsabresd: Add PCI support
> README.imximage: Fix the maximum DCD size
>
> Guillaume GARDET (1):
> imx: nitrogen6x: Replace 'fatload' by 'load' command in env
> settings to be filesystem independent
>
> Nikita Kiryanov (16):
> mx6: add clock enabling functions
> compulab: eeprom: add support for defining eeprom i2c bus
> sata: dwc_ahsata: implement sata_port_status
> i2c: imx: add macros to setup pads for multiple SoC types
> arm: mx6: ddr: cleanup
> arm: mx6: ddr: do not write into reserved bit
> arm: mx6: ddr: configure MMDC for slow_pd
> arm: mx6: ddr: fix cs0_end calculation
> arm: mx6: add get_cpu_type()
> arm: mx6: add support for Compulab cm-fx6 CoM
> arm: mx6: cm_fx6: add nand support
> arm: mx6: cm_fx6: add ethernet support
> arm: mx6: cm_fx6: add usb support
> arm: mx6: cm_fx6: add i2c support
> arm: mx6: cm_fx6: use eeprom
> arm: mx6: cm_fx6: add sata support
>
> Nikolay Dimitrov (1):
> mx6: Fix ECSPI typo in soc_boot_modes
>
> Stefan Agner (2):
> arm: vf610: lpuart: fix status register handling
> arm: vf610: lpuart: disable FIFO on initializaton
>
> Stefano Babic (1):
> imx: Fix build of mx6sxsabresd
>
> Thierry Reding (1):
> imx: ventana: Avoid undefined behaviour
>
> Tim Harvey (6):
> imx: ventana: updated notes regarding NAND boot errata
> imx: ventana: base SPL MMDC calibration on width and size not
> board imx: ventana: add GW5520 support
> imx: ventana: added cputype env var
> pci: add support for board_pci_fixup_dev function
> imx: ventana: add pci fixup for PLX PEX860x switch GPIO
>
> Ye.Li (4):
> iMX6: Disable the L2 before chaning the PL310 latency
> imximage: Fix imximage IVT bug for EIM-NOR boot
> imx: mx6q/dlarm2: Change to use generic board
> imx: mx6slevk: Change to use generic board
>
> arch/arm/Kconfig | 4 +
> arch/arm/cpu/armv7/mx6/clock.c | 107 +++++-
> arch/arm/cpu/armv7/mx6/ddr.c | 277 ++++++++--------
> arch/arm/cpu/armv7/mx6/soc.c | 11 +-
> arch/arm/dts/Makefile | 1 -
> arch/arm/dts/imx6q-sabreauto.dts | 13 -
> arch/arm/include/asm/arch-mx6/clock.h | 5 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 13 +
> arch/arm/include/asm/arch-mx6/iomux.h | 9 +
> arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +-
> arch/arm/include/asm/imx-common/mxc_i2c.h | 33 ++
> board/compulab/cm_fx6/Kconfig | 23 ++
> board/compulab/cm_fx6/MAINTAINERS | 6 +
> board/compulab/cm_fx6/Makefile | 12 +
> board/compulab/cm_fx6/cm_fx6.c | 483
> ++++++++++++++++++++++++++++
> board/compulab/cm_fx6/common.c | 84 +++++
> board/compulab/cm_fx6/common.h | 37 +++
> board/compulab/cm_fx6/imximage.cfg | 8 +
> board/compulab/cm_fx6/spl.c | 366
> +++++++++++++++++++++ board/compulab/common/eeprom.c |
> 13 +- board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
> board/gateworks/gw_ventana/eeprom.c | 3 +
> board/gateworks/gw_ventana/gsc.c | 4 +
> board/gateworks/gw_ventana/gw_ventana.c | 118 ++++++-
> board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
> board/gateworks/gw_ventana/ventana_eeprom.h | 1 +
> configs/cm_fx6_defconfig | 4 +
> configs/mx6dlsabresd_defconfig | 2 +-
> doc/README.imximage | 2 +-
> drivers/block/dwc_ahsata.c | 17 +
> drivers/net/fec_mxc.c | 42 ++-
> drivers/pci/pci.c | 4 +
> drivers/pci/pcie_imx.c | 40 ++-
> drivers/serial/serial_lpuart.c | 19 +-
> include/configs/cm_fx6.h | 290 +++++++++++++++++
> include/configs/cm_t335.h | 1 +
> include/configs/cm_t35.h | 1 +
> include/configs/cm_t54.h | 1 +
> include/configs/gw_ventana.h | 1 +
> include/configs/mx6qarm2.h | 2 +
> include/configs/mx6qsabreauto.h | 3 -
> include/configs/mx6slevk.h | 2 +
> include/configs/mx6sxsabresd.h | 10 +
> include/configs/nitrogen6x.h | 6 +-
> include/pci.h | 7 +
> include/sata.h | 1 +
> tools/imximage.c | 7 +
> tools/imximage.h | 2 +- 48 files changed,
> 2140 insertions(+), 280 deletions(-) delete mode 100644
> arch/arm/dts/imx6q-sabreauto.dts create mode 100644
> board/compulab/cm_fx6/Kconfig create mode 100644
> board/compulab/cm_fx6/MAINTAINERS create mode 100644
> board/compulab/cm_fx6/Makefile create mode 100644
> board/compulab/cm_fx6/cm_fx6.c create mode 100644
> board/compulab/cm_fx6/common.c create mode 100644
> board/compulab/cm_fx6/common.h create mode 100644
> board/compulab/cm_fx6/imximage.cfg create mode 100644
> board/compulab/cm_fx6/spl.c create mode 100644
> board/freescale/mx6sabresd/mx6dlsabresd.cfg create mode 100644
> configs/cm_fx6_defconfig create mode 100644 include/configs/cm_fx6.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140917/bf4afc0f/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-09-17 21:40 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
a7f99bf139b3aaa0d5494693fd0395084355e41a:
arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG (2014-09-11 18:04:39
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to c292adae170fa8c27dca75963bdb0a9afc640e57:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2014-09-17
23:35:34 +0200)
NOTE: two boards are broken by this PR, trimslice and cm_fx6, due to
commits in the imx tree depending on some commits in the spi tree. Once
both this PR and the spi commits are in, both boards should build fine
again.
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Fabio Estevam (9):
net: fec_mxc: Adjust RX DMA alignment for mx6solox
net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
tools: imximage: Fix the maximum DCD size for mx53/mx6
mx6dlsabresd: Use its own DCD table
mx6qsabreauto: Remove imx6q-sabreauto.dts
mx6: imx-regs: Provide a structure for GPC registers
pcie_imx: Add mx6solox support
mx6sxsabresd: Add PCI support
README.imximage: Fix the maximum DCD size
Guillaume GARDET (1):
imx: nitrogen6x: Replace 'fatload' by 'load' command in env
settings to be filesystem independent
Nikita Kiryanov (16):
mx6: add clock enabling functions
compulab: eeprom: add support for defining eeprom i2c bus
sata: dwc_ahsata: implement sata_port_status
i2c: imx: add macros to setup pads for multiple SoC types
arm: mx6: ddr: cleanup
arm: mx6: ddr: do not write into reserved bit
arm: mx6: ddr: configure MMDC for slow_pd
arm: mx6: ddr: fix cs0_end calculation
arm: mx6: add get_cpu_type()
arm: mx6: add support for Compulab cm-fx6 CoM
arm: mx6: cm_fx6: add nand support
arm: mx6: cm_fx6: add ethernet support
arm: mx6: cm_fx6: add usb support
arm: mx6: cm_fx6: add i2c support
arm: mx6: cm_fx6: use eeprom
arm: mx6: cm_fx6: add sata support
Nikolay Dimitrov (1):
mx6: Fix ECSPI typo in soc_boot_modes
Stefan Agner (2):
arm: vf610: lpuart: fix status register handling
arm: vf610: lpuart: disable FIFO on initializaton
Stefano Babic (1):
imx: Fix build of mx6sxsabresd
Thierry Reding (1):
imx: ventana: Avoid undefined behaviour
Tim Harvey (6):
imx: ventana: updated notes regarding NAND boot errata
imx: ventana: base SPL MMDC calibration on width and size not
board imx: ventana: add GW5520 support
imx: ventana: added cputype env var
pci: add support for board_pci_fixup_dev function
imx: ventana: add pci fixup for PLX PEX860x switch GPIO
Ye.Li (4):
iMX6: Disable the L2 before chaning the PL310 latency
imximage: Fix imximage IVT bug for EIM-NOR boot
imx: mx6q/dlarm2: Change to use generic board
imx: mx6slevk: Change to use generic board
arch/arm/Kconfig | 4 +
arch/arm/cpu/armv7/mx6/clock.c | 107 +++++-
arch/arm/cpu/armv7/mx6/ddr.c | 277 ++++++++--------
arch/arm/cpu/armv7/mx6/soc.c | 11 +-
arch/arm/dts/Makefile | 1 -
arch/arm/dts/imx6q-sabreauto.dts | 13 -
arch/arm/include/asm/arch-mx6/clock.h | 5 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 13 +
arch/arm/include/asm/arch-mx6/iomux.h | 9 +
arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +-
arch/arm/include/asm/imx-common/mxc_i2c.h | 33 ++
board/compulab/cm_fx6/Kconfig | 23 ++
board/compulab/cm_fx6/MAINTAINERS | 6 +
board/compulab/cm_fx6/Makefile | 12 +
board/compulab/cm_fx6/cm_fx6.c | 483
++++++++++++++++++++++++++++
board/compulab/cm_fx6/common.c | 84 +++++
board/compulab/cm_fx6/common.h | 37 +++
board/compulab/cm_fx6/imximage.cfg | 8 +
board/compulab/cm_fx6/spl.c | 366
+++++++++++++++++++++ board/compulab/common/eeprom.c |
13 +- board/freescale/mx6sabresd/mx6dlsabresd.cfg | 131 ++++++++
board/gateworks/gw_ventana/eeprom.c | 3 +
board/gateworks/gw_ventana/gsc.c | 4 +
board/gateworks/gw_ventana/gw_ventana.c | 118 ++++++-
board/gateworks/gw_ventana/gw_ventana_spl.c | 189 ++++++-----
board/gateworks/gw_ventana/ventana_eeprom.h | 1 +
configs/cm_fx6_defconfig | 4 +
configs/mx6dlsabresd_defconfig | 2 +-
doc/README.imximage | 2 +-
drivers/block/dwc_ahsata.c | 17 +
drivers/net/fec_mxc.c | 42 ++-
drivers/pci/pci.c | 4 +
drivers/pci/pcie_imx.c | 40 ++-
drivers/serial/serial_lpuart.c | 19 +-
include/configs/cm_fx6.h | 290 +++++++++++++++++
include/configs/cm_t335.h | 1 +
include/configs/cm_t35.h | 1 +
include/configs/cm_t54.h | 1 +
include/configs/gw_ventana.h | 1 +
include/configs/mx6qarm2.h | 2 +
include/configs/mx6qsabreauto.h | 3 -
include/configs/mx6slevk.h | 2 +
include/configs/mx6sxsabresd.h | 10 +
include/configs/nitrogen6x.h | 6 +-
include/pci.h | 7 +
include/sata.h | 1 +
tools/imximage.c | 7 +
tools/imximage.h | 2 +- 48 files changed,
2140 insertions(+), 280 deletions(-) delete mode 100644
arch/arm/dts/imx6q-sabreauto.dts create mode 100644
board/compulab/cm_fx6/Kconfig create mode 100644
board/compulab/cm_fx6/MAINTAINERS create mode 100644
board/compulab/cm_fx6/Makefile create mode 100644
board/compulab/cm_fx6/cm_fx6.c create mode 100644
board/compulab/cm_fx6/common.c create mode 100644
board/compulab/cm_fx6/common.h create mode 100644
board/compulab/cm_fx6/imximage.cfg create mode 100644
board/compulab/cm_fx6/spl.c create mode 100644
board/freescale/mx6sabresd/mx6dlsabresd.cfg create mode 100644
configs/cm_fx6_defconfig create mode 100644 include/configs/cm_fx6.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-09-12 13:42 Albert ARIBAUD
@ 2014-09-12 19:15 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-09-12 19:15 UTC (permalink / raw)
To: u-boot
On Fri, Sep 12, 2014 at 03:42:19PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6:
>
> Prepare v2014.10-rc2 (2014-09-02 16:58:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to a7f99bf139b3aaa0d5494693fd0395084355e41a:
>
> arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG (2014-09-11 18:04:39
> +0200)
>
> NOTE that 7 boards still fail building, two with warnings (k2e_evm
> k2hk_evm), five with errors (openrd_client tricorder_flash tricorder
> openrd_ultimate openrd_base).
>
> ----------------------------------------------------------------
> Ajay Kumar (8):
> exynos_fb: Remove usage of static defines
> arm: exynos: Add RPLL for Exynos5420
> arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for
> Exynos5420 video: exynos_fimd: Add framework to disable FIMD sysmmu
> ARM: exynos: Add missing declaration for gpio_direction_input
> exynos5420: add callbacks needed for exynos_fb driver
> ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge
> chip CONFIGS: peach-pit: Enable display for peach_pit board
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
>
> Beno?t Th?baudeau (2):
> arm: Make reset position-independent
> arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG
>
> Enric Balletbo i Serra (1):
> AM335x: igep0033: Convert to generic board and use
> ti_am335x_common.h.
>
> FUKAUMI Naoki (1):
> sun7i: Add support for Olimex A20-OLinuXino-LIME
>
> Guillaume GARDET (1):
> omap3_beagle: Add boot script support to omap3 beagle board
>
> Ian Campbell (1):
> sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE
>
> Jeroen Hofstee (8):
> board_r: ARM[64] do not set gd again
> ARM: SPL: do not set gd again
> cc-option: also detect unsupported warnings options
> ARM: make gd a function for clang
> eabi_compat: add __aeabi_memcpy __aeabi_memset
> clang: workaround for generated constants
> Makefile: default to cc for host compiler
> README.clang: build command with clang
>
> Khoronzhuk, Ivan (3):
> ARM: keystone: clock: use correct BWADJ field mask for PASSPLLCTL0
> keystone2: use readl/writel functions instead of redefinition
> mtd: nand: davinci_nand: correct keystone RBL layout definition
>
> Masahiro Yamada (3):
> arm: am335x: add Kconfig range attribute to prevent invalid
> CONS_INDEX MAINTAINERS: update the maintainer of Arndale board
> kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS
>
> Przemyslaw Marczak (13):
> samsung: misc: fix soc revision setting in the set_board_info()
> exynos: pinmux: fix the gpio names for exynos4x12 mmc
> arch:exynos: boot mode: add get_boot_mode(), code cleanup
> board:samsung: check the boot device and init the right mmc
> driver. samsung: misc: add function for setting $dfu_alt_info
> samsung:board: misc_init_r: call set_dfu_alt_info()
> arm:reset: call the reset_misc() before the cpu reset
> samsung: board: enable support of multiple board types
> samsung: misc: use board specific functions to set env board info
> odroid: add board file for Odroid X2/U3 based on Samsung
> Exynos4412 odroid: add odroid U3/X2 device tree description
> odroid: kconfig: add odroid_defconfig
> odroid: set MPLL clock to 880MHz
>
> R Sricharan (1):
> ARM: DRA72: DDR3: Add emif settings for 666MHz clock
>
> Rostislav Lisovy (2):
> mtd: nand: omap_gpmc: Enable multiple NAND flash devices
> mtd: nand: omap_gpmc: Fix 'bit-flip' errors
>
> Vadim Bendebury (1):
> video: Add driver for Parade PS8625 dP to LVDS bridge
>
> Kbuild | 3 +-
> Makefile | 4 +-
> arch/arm/cpu/armv7/exynos/Kconfig | 4 +
> arch/arm/cpu/armv7/exynos/clock.c | 83
> +++++++++++++++++++-- arch/arm/cpu/armv7/exynos/clock_init.h
> | 3 + arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 13 ++++
> arch/arm/cpu/armv7/exynos/exynos5_setup.h | 2 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 4 +-
> arch/arm/cpu/armv7/exynos/power.c | 7 ++
> arch/arm/cpu/armv7/exynos/spl_boot.c | 7 +-
> arch/arm/cpu/armv7/keystone/clock.c | 2 +-
> arch/arm/cpu/armv7/keystone/psc.c | 44 +++++------
> arch/arm/cpu/armv7/omap5/hw_data.c | 39 +++++++++-
> arch/arm/cpu/armv7/omap5/sdram.c | 60 ++++++++++++++-
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/exynos4412-odroid.dts | 70 ++++++++++++++++++
> arch/arm/dts/exynos5420-peach-pit.dts | 30 ++++++++
> arch/arm/dts/exynos54xx.dtsi | 10 +++
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/gpio.h | 1 +
> arch/arm/include/asm/arch-exynos/power.h | 21 ++++++
> arch/arm/include/asm/arch-exynos/spl.h | 17 +----
> arch/arm/include/asm/arch-exynos/system.h | 4 +
> arch/arm/include/asm/arch-keystone/emac_defs.h | 7 +-
> arch/arm/include/asm/global_data.h | 25 +++++++
> arch/arm/lib/eabi_compat.c | 15 +++-
> arch/arm/lib/reset.c | 6 ++
> arch/arm/lib/spl.c | 3 -
> arch/arm/lib/vectors.S | 6 +-
> board/samsung/arndale/MAINTAINERS | 2 +-
> board/samsung/common/board.c | 69 ++++++++++++++----
> board/samsung/common/misc.c | 57 ++++++++++++++-
> board/samsung/odroid/Kconfig | 15 ++++
> board/samsung/odroid/MAINTAINERS | 6 ++
> board/samsung/odroid/Makefile | 8 ++
> board/samsung/odroid/odroid.c | 470
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/samsung/odroid/setup.h | 255
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/samsung/smdk5420/smdk5420.c | 129
> ++++++++++++---------------------
> board/sunxi/Kconfig | 4 +-
> board/sunxi/MAINTAINERS | 6 ++
> board/sunxi/Makefile | 1 +
> board/sunxi/dram_a20_olinuxino_l.c | 31 ++++++++
> board/ti/am335x/Kconfig | 1 +
> common/board_r.c | 2 +-
> configs/A10-OLinuXino-Lime_defconfig | 4 +-
> configs/A10s-OLinuXino-M_defconfig | 4 +-
> configs/A13-OLinuXinoM_defconfig | 4 +-
> configs/A13-OLinuXino_defconfig | 4 +-
> configs/A20-OLinuXino-Lime_defconfig | 5 ++
> configs/A20-OLinuXino_MICRO_defconfig | 4 +-
> configs/Auxtek-T004_defconfig | 4 +-
> configs/Bananapi_defconfig | 4 +-
> configs/Cubieboard2_FEL_defconfig | 2 +-
> configs/Cubieboard2_defconfig | 4 +-
> configs/Cubieboard_defconfig | 4 +-
> configs/Cubietruck_FEL_defconfig | 2 +-
> configs/Cubietruck_defconfig | 4 +-
> configs/Linksprite_pcDuino3_defconfig | 4 +-
> configs/Mele_A1000G_defconfig | 4 +-
> configs/Mele_A1000_defconfig | 4 +-
> configs/Mini-X-1Gb_defconfig | 4 +-
> configs/Mini-X_defconfig | 4 +-
> configs/ba10_tv_box_defconfig | 4 +-
> configs/gwventana_defconfig | 2 +-
> configs/i12-tvbox_defconfig | 4 +-
> configs/odroid_defconfig | 3 +
> configs/qt840a_defconfig | 4 +-
> configs/r7-tv-dongle_defconfig | 4 +-
> doc/README.clang | 56 ++++++++++++++
> doc/README.odroid | 143
> ++++++++++++++++++++++++++++++++++++
> doc/device-tree-bindings/video/exynos-fb.txt | 6 ++
> drivers/mtd/nand/davinci_nand.c | 2 +-
> drivers/mtd/nand/omap_gpmc.c | 46 ++++++------
> drivers/net/keystone_net.c | 35 ++++-----
> drivers/video/Makefile | 1 +
> drivers/video/exynos_fb.c | 18 ++---
> drivers/video/exynos_fimd.c | 43 +++++++++++
> drivers/video/parade.c | 220
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/common.h | 1 +
> include/configs/am335x_igep0033.h | 221
> +++++++++++---------------------------------------------
> include/configs/exynos5250-dt.h | 2 -
> include/configs/odroid.h | 216
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/omap3_beagle.h | 13 +++-
> include/configs/peach-pit.h | 10 +++
> include/configs/s5pc210_universal.h | 3 -
> include/configs/sunxi-common.h | 2 +-
> include/configs/trats.h | 3 -
> include/configs/trats2.h | 3 -
> include/fdtdec.h | 2 +
> include/linux/kbuild.h | 6 +-
> include/samsung/misc.h | 10 +++
> lib/fdtdec.c | 2 +
> scripts/Kbuild.include | 4 +- 93 files
> changed, 2235 insertions(+), 473 deletions(-) create mode 100644
> arch/arm/dts/exynos4412-odroid.dts create mode 100644
> board/samsung/odroid/Kconfig create mode 100644
> board/samsung/odroid/MAINTAINERS create mode 100644
> board/samsung/odroid/Makefile create mode 100644
> board/samsung/odroid/odroid.c create mode 100644
> board/samsung/odroid/setup.h create mode 100644
> board/sunxi/dram_a20_olinuxino_l.c create mode 100644
> configs/A20-OLinuXino-Lime_defconfig create mode 100644
> configs/odroid_defconfig create mode 100644 doc/README.clang create
> mode 100644 doc/README.odroid create mode 100644
> drivers/video/parade.c create mode 100644 include/configs/odroid.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140912/427b14fb/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-09-12 13:42 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6:
Prepare v2014.10-rc2 (2014-09-02 16:58:29 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to a7f99bf139b3aaa0d5494693fd0395084355e41a:
arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG (2014-09-11 18:04:39
+0200)
NOTE that 7 boards still fail building, two with warnings (k2e_evm
k2hk_evm), five with errors (openrd_client tricorder_flash tricorder
openrd_ultimate openrd_base).
----------------------------------------------------------------
Ajay Kumar (8):
exynos_fb: Remove usage of static defines
arm: exynos: Add RPLL for Exynos5420
arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for
Exynos5420 video: exynos_fimd: Add framework to disable FIMD sysmmu
ARM: exynos: Add missing declaration for gpio_direction_input
exynos5420: add callbacks needed for exynos_fb driver
ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge
chip CONFIGS: peach-pit: Enable display for peach_pit board
Albert ARIBAUD (2):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
Beno?t Th?baudeau (2):
arm: Make reset position-independent
arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG
Enric Balletbo i Serra (1):
AM335x: igep0033: Convert to generic board and use
ti_am335x_common.h.
FUKAUMI Naoki (1):
sun7i: Add support for Olimex A20-OLinuXino-LIME
Guillaume GARDET (1):
omap3_beagle: Add boot script support to omap3 beagle board
Ian Campbell (1):
sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE
Jeroen Hofstee (8):
board_r: ARM[64] do not set gd again
ARM: SPL: do not set gd again
cc-option: also detect unsupported warnings options
ARM: make gd a function for clang
eabi_compat: add __aeabi_memcpy __aeabi_memset
clang: workaround for generated constants
Makefile: default to cc for host compiler
README.clang: build command with clang
Khoronzhuk, Ivan (3):
ARM: keystone: clock: use correct BWADJ field mask for PASSPLLCTL0
keystone2: use readl/writel functions instead of redefinition
mtd: nand: davinci_nand: correct keystone RBL layout definition
Masahiro Yamada (3):
arm: am335x: add Kconfig range attribute to prevent invalid
CONS_INDEX MAINTAINERS: update the maintainer of Arndale board
kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS
Przemyslaw Marczak (13):
samsung: misc: fix soc revision setting in the set_board_info()
exynos: pinmux: fix the gpio names for exynos4x12 mmc
arch:exynos: boot mode: add get_boot_mode(), code cleanup
board:samsung: check the boot device and init the right mmc
driver. samsung: misc: add function for setting $dfu_alt_info
samsung:board: misc_init_r: call set_dfu_alt_info()
arm:reset: call the reset_misc() before the cpu reset
samsung: board: enable support of multiple board types
samsung: misc: use board specific functions to set env board info
odroid: add board file for Odroid X2/U3 based on Samsung
Exynos4412 odroid: add odroid U3/X2 device tree description
odroid: kconfig: add odroid_defconfig
odroid: set MPLL clock to 880MHz
R Sricharan (1):
ARM: DRA72: DDR3: Add emif settings for 666MHz clock
Rostislav Lisovy (2):
mtd: nand: omap_gpmc: Enable multiple NAND flash devices
mtd: nand: omap_gpmc: Fix 'bit-flip' errors
Vadim Bendebury (1):
video: Add driver for Parade PS8625 dP to LVDS bridge
Kbuild | 3 +-
Makefile | 4 +-
arch/arm/cpu/armv7/exynos/Kconfig | 4 +
arch/arm/cpu/armv7/exynos/clock.c | 83
+++++++++++++++++++-- arch/arm/cpu/armv7/exynos/clock_init.h
| 3 + arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 13 ++++
arch/arm/cpu/armv7/exynos/exynos5_setup.h | 2 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 4 +-
arch/arm/cpu/armv7/exynos/power.c | 7 ++
arch/arm/cpu/armv7/exynos/spl_boot.c | 7 +-
arch/arm/cpu/armv7/keystone/clock.c | 2 +-
arch/arm/cpu/armv7/keystone/psc.c | 44 +++++------
arch/arm/cpu/armv7/omap5/hw_data.c | 39 +++++++++-
arch/arm/cpu/armv7/omap5/sdram.c | 60 ++++++++++++++-
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/exynos4412-odroid.dts | 70 ++++++++++++++++++
arch/arm/dts/exynos5420-peach-pit.dts | 30 ++++++++
arch/arm/dts/exynos54xx.dtsi | 10 +++
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/gpio.h | 1 +
arch/arm/include/asm/arch-exynos/power.h | 21 ++++++
arch/arm/include/asm/arch-exynos/spl.h | 17 +----
arch/arm/include/asm/arch-exynos/system.h | 4 +
arch/arm/include/asm/arch-keystone/emac_defs.h | 7 +-
arch/arm/include/asm/global_data.h | 25 +++++++
arch/arm/lib/eabi_compat.c | 15 +++-
arch/arm/lib/reset.c | 6 ++
arch/arm/lib/spl.c | 3 -
arch/arm/lib/vectors.S | 6 +-
board/samsung/arndale/MAINTAINERS | 2 +-
board/samsung/common/board.c | 69 ++++++++++++++----
board/samsung/common/misc.c | 57 ++++++++++++++-
board/samsung/odroid/Kconfig | 15 ++++
board/samsung/odroid/MAINTAINERS | 6 ++
board/samsung/odroid/Makefile | 8 ++
board/samsung/odroid/odroid.c | 470
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/samsung/odroid/setup.h | 255
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/samsung/smdk5420/smdk5420.c | 129
++++++++++++---------------------
board/sunxi/Kconfig | 4 +-
board/sunxi/MAINTAINERS | 6 ++
board/sunxi/Makefile | 1 +
board/sunxi/dram_a20_olinuxino_l.c | 31 ++++++++
board/ti/am335x/Kconfig | 1 +
common/board_r.c | 2 +-
configs/A10-OLinuXino-Lime_defconfig | 4 +-
configs/A10s-OLinuXino-M_defconfig | 4 +-
configs/A13-OLinuXinoM_defconfig | 4 +-
configs/A13-OLinuXino_defconfig | 4 +-
configs/A20-OLinuXino-Lime_defconfig | 5 ++
configs/A20-OLinuXino_MICRO_defconfig | 4 +-
configs/Auxtek-T004_defconfig | 4 +-
configs/Bananapi_defconfig | 4 +-
configs/Cubieboard2_FEL_defconfig | 2 +-
configs/Cubieboard2_defconfig | 4 +-
configs/Cubieboard_defconfig | 4 +-
configs/Cubietruck_FEL_defconfig | 2 +-
configs/Cubietruck_defconfig | 4 +-
configs/Linksprite_pcDuino3_defconfig | 4 +-
configs/Mele_A1000G_defconfig | 4 +-
configs/Mele_A1000_defconfig | 4 +-
configs/Mini-X-1Gb_defconfig | 4 +-
configs/Mini-X_defconfig | 4 +-
configs/ba10_tv_box_defconfig | 4 +-
configs/gwventana_defconfig | 2 +-
configs/i12-tvbox_defconfig | 4 +-
configs/odroid_defconfig | 3 +
configs/qt840a_defconfig | 4 +-
configs/r7-tv-dongle_defconfig | 4 +-
doc/README.clang | 56 ++++++++++++++
doc/README.odroid | 143
++++++++++++++++++++++++++++++++++++
doc/device-tree-bindings/video/exynos-fb.txt | 6 ++
drivers/mtd/nand/davinci_nand.c | 2 +-
drivers/mtd/nand/omap_gpmc.c | 46 ++++++------
drivers/net/keystone_net.c | 35 ++++-----
drivers/video/Makefile | 1 +
drivers/video/exynos_fb.c | 18 ++---
drivers/video/exynos_fimd.c | 43 +++++++++++
drivers/video/parade.c | 220
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/common.h | 1 +
include/configs/am335x_igep0033.h | 221
+++++++++++---------------------------------------------
include/configs/exynos5250-dt.h | 2 -
include/configs/odroid.h | 216
++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/omap3_beagle.h | 13 +++-
include/configs/peach-pit.h | 10 +++
include/configs/s5pc210_universal.h | 3 -
include/configs/sunxi-common.h | 2 +-
include/configs/trats.h | 3 -
include/configs/trats2.h | 3 -
include/fdtdec.h | 2 +
include/linux/kbuild.h | 6 +-
include/samsung/misc.h | 10 +++
lib/fdtdec.c | 2 +
scripts/Kbuild.include | 4 +- 93 files
changed, 2235 insertions(+), 473 deletions(-) create mode 100644
arch/arm/dts/exynos4412-odroid.dts create mode 100644
board/samsung/odroid/Kconfig create mode 100644
board/samsung/odroid/MAINTAINERS create mode 100644
board/samsung/odroid/Makefile create mode 100644
board/samsung/odroid/odroid.c create mode 100644
board/samsung/odroid/setup.h create mode 100644
board/sunxi/dram_a20_olinuxino_l.c create mode 100644
configs/A20-OLinuXino-Lime_defconfig create mode 100644
configs/odroid_defconfig create mode 100644 doc/README.clang create
mode 100644 doc/README.odroid create mode 100644
drivers/video/parade.c create mode 100644 include/configs/odroid.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-07-29 13:08 Albert ARIBAUD
@ 2014-07-29 14:30 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-07-29 14:30 UTC (permalink / raw)
To: u-boot
On Tue, Jul 29, 2014 at 03:08:16PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 772e173802627a1917a3f5878ad4b9b920089a33:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sh (2014-07-25
> 15:05:09 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 9d195a546179bc732aba9eacccf0a9a3db591288:
>
> ARM: HYP/non-sec: remove MIDR check to validate CBAR (2014-07-28
> 17:19:55 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (4):
> Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
> Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>
> Andreas Bie?mann (1):
> tricorder: convert to generic board
>
> Chen-Yu Tsai (1):
> sunxi: Add support for using MII phy-s with the GMAC nic
>
> Hans de Goede (12):
> sunxi: mksunxiboot: Fix loading of files with a size which is not
> a multiple of 4 sunxi: Fix u-boot-spl.lds to refer to .vectors
> sunxi: Remove mmc DMA support
> sunxi: Implement reset_cpu
> sunxi: Add sun4i support
> sunxi: Add sun5i support
> sunxi: Add emac glue, enable emac on the cubieboard
> sunxi: Add Ian Campbell and Hans de Goede as cubietruck
> board-maintainers mvtwsi: convert to CONFIG_SYS_I2C framework
> sunxi: Add i2c support
> sunxi: Add axp152 pmic support
> sunxi: Fix reset hang on sun5i
>
> Hao Zhang (10):
> keystone2: ddr: add DDR3 PHY configs updated for PG 2.0
> keystone2: move cpu_to_bus() to keystone.c
> keystone2: add possibility to turn off all dsps
> ARM: keystone2: move K2HK board files to common KS2 board
> directory configs: k2hk_evm: config: add common EVM configuration header
> keystone: ddr3: move K2HK DDR3 configuration to a common file
> ARM: keystone2: add K2E SoC hardware definitions
> ARM: keystone2: clock: add K2E clock support
> ARM: keystone2: add MSMC cache coherency support for K2E SOC
> board: k2e-evm: add board support
>
> Henrik Nordstrom (1):
> sunxi: Add axp209 pmic support
>
> Ian Campbell (4):
> sunxi: Avoid unused variable warning.
> sunxi: add Cubieboard2 support
> sunxi: add gpio driver
> sunxi: use setbits_le32 to enable the DMA clock
>
> Jonathan Liu (1):
> sunxi: use random parts of SID to set ethaddr
>
> Khoronzhuk, Ivan (10):
> mtd: nand: davinci: add opportunity to write keystone U-boot image
> keystone: add support for NAND gpheader image
> k2hk_evm: add script to automate NAND flash process
> ARM: keystone2: psc: use common PSC base
> keystone: ddr3: add ddr3.h to hold ddr3 API
> ARM: keystone2: keystone_nav: make it dependent on keystone driver
> k2hk: use common KS2_ prefix for all hardware definitions
> ARM: keystone: clock: move K2HK SoC dependent code in separate
> file keystone2: use CONFIG_SOC_KEYSTONE in common places
> ARM: keystone2: spl: add K2E SoC support
>
> Ma Haijun (1):
> ARM: convert arch_fixup_memory_node to a generic FDT fixup
> function
>
> Marc Zyngier (10):
> ARM: HYP/non-sec: move switch to non-sec to the last boot phase
> ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
> ARM: non-sec: reset CNTVOFF to zero
> ARM: add missing HYP mode constant
> ARM: HYP/non-sec: add separate section for secure code
> ARM: HYP/non-sec: allow relocation to secure RAM
> ARM: HYP/non-sec: add generic ARMv7 PSCI code
> ARM: HYP/non-sec: add the option for a second-stage monitor
> ARM: HYP/non-sec/PSCI: emit DT nodes
> ARM: HYP/non-sec: remove MIDR check to validate CBAR
>
> Masahiro Yamada (1):
> zynq: disable -Wstrict-prototypes option for ps7_init.c
>
> Michal Simek (2):
> ARM: zynq: Enable generic board for Xilinx Zynq
> ARM: zynq: Show ECC status on the same line as DRAM size
>
> Mugunthan V N (3):
> drivers: net: cpsw: add support for using second port as ethernet
> ARM: DRA7xx: Add cpsw second port pinmux
> ARM: dra7_evm: Add Ethernet support for dra72x platform
>
> Murali Karicheri (1):
> keystone2: add env option to do unitrd dt fixup
>
> Nobuhiro Iwamatsu (4):
> net: sh-eth: Add support R8A7794
> serial: sh: Add support R8A7794
> arm: rmobile: Add support R8A7794
> arm: rmobile: Add support Alt board
>
> Rajendra Nayak (1):
> ARM: OMAP: Fix handling of errata i727
>
> Stefan Roese (4):
> net: Rename and cleanup sunxi (Allwinner) emac driver
> ARM: omap: Fix GPMC init for OMAP3 platforms
> ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c
> ARM: omap: tao3530: Convert to generic board
>
> Tom Rini (3):
> power/pmic.h: Add prototype for power_init_board.
> tps65218/am43xx_evm: Add power framework support to TPS65218
> am335x_evm / gumstix pepper: Correct DDR settings
>
> pekon gupta (3):
> ARM: omap: fix GPMC address-map size for NAND and NOR devices
> ARM: omap: clean redundant PISMO_xx macros used in OMAP3
> ARM: omap: move board specific NAND configs out from
> ti_armv7_common.h
>
> Makefile | 6 +
> arch/arm/config.mk | 2 +-
> arch/arm/cpu/armv7/Makefile | 5 +
> arch/arm/cpu/armv7/keystone/Makefile | 5 +-
> arch/arm/cpu/armv7/keystone/clock-k2e.c | 101 ++++++++
> arch/arm/cpu/armv7/keystone/clock-k2hk.c | 113 +++++++++
> arch/arm/cpu/armv7/keystone/clock.c | 154 +++---------
> arch/arm/cpu/armv7/keystone/cmd_clock.c | 31 ++-
> arch/arm/cpu/armv7/keystone/ddr3.c | 25 +-
> arch/arm/cpu/armv7/keystone/init.c | 16 +-
> arch/arm/cpu/armv7/keystone/keystone.c | 87 +++++++
> arch/arm/cpu/armv7/keystone/msmc.c | 6 +-
> arch/arm/cpu/armv7/keystone/psc.c | 42 ++--
> arch/arm/cpu/armv7/keystone/spl.c | 8 +
> arch/arm/cpu/armv7/nonsec_virt.S | 168 +++++++------
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 3 +-
> arch/arm/cpu/armv7/omap-common/mem-common.c | 15 +-
> arch/arm/cpu/armv7/omap3/mem.c | 139 -----------
> arch/arm/cpu/armv7/psci.S | 102 ++++++++
> arch/arm/cpu/armv7/rmobile/Makefile | 1 +
> arch/arm/cpu/armv7/rmobile/cpu_info.c | 1 +
> arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c | 1513
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/Makefile | 4 +
> arch/arm/cpu/armv7/sunxi/board.c | 41 +++-
> arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 3 +-
> arch/arm/cpu/armv7/sunxi/cpu_info.c | 15 ++
> arch/arm/cpu/armv7/sunxi/dram.c | 102 +++++++-
> arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 5 +
> arch/arm/cpu/armv7/sunxi/u-boot-spl.lds | 6 +
> arch/arm/cpu/armv7/virt-dt.c | 100 ++++++++
> arch/arm/cpu/armv7/virt-v7.c | 76 ++----
> arch/arm/cpu/armv7/zynq/ddrc.c | 4 +-
> arch/arm/cpu/u-boot.lds | 30 +++
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 4 -
> arch/arm/include/asm/arch-am33xx/mem.h | 7 -
> arch/arm/include/asm/arch-keystone/clock-k2e.h | 68 ++++++
> arch/arm/include/asm/arch-keystone/clock-k2hk.h | 23 +-
> arch/arm/include/asm/arch-keystone/clock.h | 32 +++
> arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +-
> arch/arm/include/asm/arch-keystone/ddr3.h | 56 +++++
> arch/arm/include/asm/arch-keystone/hardware-k2e.h | 44 ++++
> arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 182
> +++++--------- arch/arm/include/asm/arch-keystone/hardware.h |
> 117 +++++---- arch/arm/include/asm/arch-keystone/mon.h |
> 15 ++ arch/arm/include/asm/arch-keystone/msmc.h | 17 ++
> arch/arm/include/asm/arch-kirkwood/config.h | 3 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 1 -
> arch/arm/include/asm/arch-omap3/mem.h | 13 -
> arch/arm/include/asm/arch-rmobile/gpio.h | 3 +
> arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h | 176
> ++++++++++++++ arch/arm/include/asm/arch-rmobile/r8a7794.h |
> 14 ++ arch/arm/include/asm/arch-rmobile/rcar-base.h | 4 +-
> arch/arm/include/asm/arch-rmobile/rmobile.h | 2 +
> arch/arm/include/asm/arch-sunxi/gpio.h | 2 +
> arch/arm/include/asm/arch-sunxi/i2c.h | 15 ++
> arch/arm/include/asm/arch-sunxi/timer.h | 5 +
> arch/arm/include/asm/armv7.h | 11 +-
> arch/arm/include/asm/omap_common.h | 8 +
> arch/arm/include/asm/proc-armv/ptrace.h | 2 +
> arch/arm/include/asm/psci.h | 35 +++
> arch/arm/include/asm/secure.h | 26 ++
> arch/arm/lib/bootm-fdt.c | 14 +-
> arch/arm/lib/bootm.c | 31 ++-
> arch/arm/lib/interrupts.c | 2 +-
> arch/arm/lib/sections.c | 2 +
> board/gumstix/pepper/board.c | 30 +--
> board/renesas/alt/Makefile | 9 +
> board/renesas/alt/alt.c | 173
> +++++++++++++ board/renesas/alt/qos.c |
> 944
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/renesas/alt/qos.h | 12 +
> board/sunxi/Makefile | 4 +
> board/sunxi/board.c | 67 +++++
> board/sunxi/dram_a13_oli_micro.c | 32 +++
> board/sunxi/dram_cubieboard.c | 31 +++
> board/sunxi/dram_cubieboard2.c | 31 +++
> board/sunxi/dram_r7dongle.c | 31 +++
> board/sunxi/gmac.c | 11 +
> board/ti/am335x/board.c | 30 +--
> board/ti/am43xx/board.c | 14 ++
> board/ti/dra7xx/evm.c | 7 +-
> board/ti/dra7xx/mux_data.h | 12 +
> board/ti/k2hk_evm/Makefile | 9 -
> board/ti/k2hk_evm/ddr3.c | 268
> --------------------
> board/ti/ks2_evm/Makefile | 13 +
> board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} | 28 ++-
> board/ti/{k2hk_evm => ks2_evm}/board.c | 156 ++++--------
> board/ti/ks2_evm/board.h | 19 ++
> board/ti/ks2_evm/board_k2e.c | 39 +++
> board/ti/ks2_evm/board_k2hk.c | 81 ++++++
> board/ti/ks2_evm/ddr3_cfg.c | 170
> +++++++++++++ board/ti/ks2_evm/ddr3_cfg.h |
> 24 ++ board/ti/ks2_evm/ddr3_k2e.c | 55 +++++
> board/ti/ks2_evm/ddr3_k2hk.c | 84 +++++++
> board/xilinx/zynq/Makefile | 3 +
> boards.cfg | 13 +-
> common/image-fdt.c | 9 +-
> doc/README.nand | 12 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/sunxi_gpio.c | 102 ++++++++
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/mvtwsi.c | 88 ++++---
> drivers/mmc/sunxi_mmc.c | 141 +----------
> drivers/mtd/nand/davinci_nand.c | 196
> +++++++++++++++ drivers/net/Makefile
> | 2 +- drivers/net/cpsw.c | 8 +-
> drivers/net/sh_eth.c | 5 +-
> drivers/net/sh_eth.h | 6 +-
> drivers/net/{sunxi_wemac.c => sunxi_emac.c} | 140 ++++++-----
> drivers/power/Makefile | 2 +
> drivers/power/axp152.c | 97 ++++++++
> drivers/power/axp209.c | 167
> +++++++++++++ drivers/power/pmic/pmic_tps65218.c |
> 22 ++ drivers/serial/ns16550.c | 4 +-
> drivers/serial/serial_sh.h | 3 +-
> include/axp152.h | 10 +
> include/axp209.h | 14 ++
> include/common.h | 6 +-
> include/configs/alt.h | 166
> +++++++++++++ include/configs/am335x_evm.h |
> 6 + include/configs/am3517_crane.h | 7 +-
> include/configs/am3517_evm.h | 7 +-
> include/configs/am43xx_evm.h | 2 +
> include/configs/cm_t335.h | 5 +
> include/configs/cm_t35.h | 3 -
> include/configs/devkit8000.h | 2 -
> include/configs/dig297.h | 4 -
> include/configs/edminiv2.h | 3 +-
> include/configs/k2e_evm.h | 37 +++
> include/configs/k2hk_evm.h | 253
> ++----------------- include/configs/ks2_evm.h
> | 275 +++++++++++++++++++++
> include/configs/mcx.h | 4 -
> include/configs/nokia_rx51.h | 2 -
> include/configs/omap3_beagle.h | 13 +-
> include/configs/omap3_evm_common.h | 7 +-
> include/configs/omap3_igep00x0.h | 10 +-
> include/configs/omap3_logic.h | 8 +-
> include/configs/omap3_overo.h | 12 +-
> include/configs/omap3_pandora.h | 7 +-
> include/configs/omap3_zoom1.h | 13 +-
> include/configs/pengwyn.h | 6 +
> include/configs/sun4i.h | 24 ++
> include/configs/sun5i.h | 24 ++
> include/configs/sun7i.h | 1 +
> include/configs/sunxi-common.h | 27 +-
> include/configs/tam3517-common.h | 4 -
> include/configs/tao3530.h | 8 +-
> include/configs/ti_armv7_common.h | 8 -
> include/configs/tricorder.h | 4 +-
> include/configs/zynq-common.h | 2 +
> include/cpsw.h | 1 +
> include/netdev.h | 2 +-
> include/power/pmic.h | 1 +
> include/power/tps65218.h | 1 +
> tools/mksunxiboot.c | 10 +- 154 files
> changed, 6535 insertions(+), 1736 deletions(-) create mode 100644
> arch/arm/cpu/armv7/keystone/clock-k2e.c create mode 100644
> arch/arm/cpu/armv7/keystone/clock-k2hk.c create mode 100644
> arch/arm/cpu/armv7/keystone/keystone.c delete mode 100644
> arch/arm/cpu/armv7/omap3/mem.c create mode 100644
> arch/arm/cpu/armv7/psci.S create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c create mode 100644
> arch/arm/cpu/armv7/virt-dt.c create mode 100644
> arch/arm/include/asm/arch-keystone/clock-k2e.h create mode 100644
> arch/arm/include/asm/arch-keystone/ddr3.h create mode 100644
> arch/arm/include/asm/arch-keystone/hardware-k2e.h create mode 100644
> arch/arm/include/asm/arch-keystone/mon.h create mode 100644
> arch/arm/include/asm/arch-keystone/msmc.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7794.h create mode 100644
> arch/arm/include/asm/arch-sunxi/i2c.h create mode 100644
> arch/arm/include/asm/psci.h create mode 100644
> arch/arm/include/asm/secure.h create mode 100644
> board/renesas/alt/Makefile create mode 100644 board/renesas/alt/alt.c
> create mode 100644 board/renesas/alt/qos.c create mode 100644
> board/renesas/alt/qos.h create mode 100644
> board/sunxi/dram_a13_oli_micro.c create mode 100644
> board/sunxi/dram_cubieboard.c create mode 100644
> board/sunxi/dram_cubieboard2.c create mode 100644
> board/sunxi/dram_r7dongle.c delete mode 100644
> board/ti/k2hk_evm/Makefile delete mode 100644 board/ti/k2hk_evm/ddr3.c
> create mode 100644 board/ti/ks2_evm/Makefile rename
> board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} (80%) rename
> board/ti/{k2hk_evm => ks2_evm}/board.c (65%) create mode 100644
> board/ti/ks2_evm/board.h create mode 100644
> board/ti/ks2_evm/board_k2e.c create mode 100644
> board/ti/ks2_evm/board_k2hk.c create mode 100644
> board/ti/ks2_evm/ddr3_cfg.c create mode 100644
> board/ti/ks2_evm/ddr3_cfg.h create mode 100644
> board/ti/ks2_evm/ddr3_k2e.c create mode 100644
> board/ti/ks2_evm/ddr3_k2hk.c create mode 100644
> drivers/gpio/sunxi_gpio.c rename drivers/net/{sunxi_wemac.c =>
> sunxi_emac.c} (78%) create mode 100644 drivers/power/axp152.c create
> mode 100644 drivers/power/axp209.c create mode 100644 include/axp152.h
> create mode 100644 include/axp209.h create mode 100644
> include/configs/alt.h create mode 100644 include/configs/k2e_evm.h
> create mode 100644 include/configs/ks2_evm.h
> create mode 100644 include/configs/sun4i.h
> create mode 100644 include/configs/sun5i.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140729/f6f27859/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-07-29 13:08 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
772e173802627a1917a3f5878ad4b9b920089a33:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2014-07-25
15:05:09 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 9d195a546179bc732aba9eacccf0a9a3db591288:
ARM: HYP/non-sec: remove MIDR check to validate CBAR (2014-07-28
17:19:55 +0200)
----------------------------------------------------------------
Albert ARIBAUD (4):
Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Andreas Bie?mann (1):
tricorder: convert to generic board
Chen-Yu Tsai (1):
sunxi: Add support for using MII phy-s with the GMAC nic
Hans de Goede (12):
sunxi: mksunxiboot: Fix loading of files with a size which is not
a multiple of 4 sunxi: Fix u-boot-spl.lds to refer to .vectors
sunxi: Remove mmc DMA support
sunxi: Implement reset_cpu
sunxi: Add sun4i support
sunxi: Add sun5i support
sunxi: Add emac glue, enable emac on the cubieboard
sunxi: Add Ian Campbell and Hans de Goede as cubietruck
board-maintainers mvtwsi: convert to CONFIG_SYS_I2C framework
sunxi: Add i2c support
sunxi: Add axp152 pmic support
sunxi: Fix reset hang on sun5i
Hao Zhang (10):
keystone2: ddr: add DDR3 PHY configs updated for PG 2.0
keystone2: move cpu_to_bus() to keystone.c
keystone2: add possibility to turn off all dsps
ARM: keystone2: move K2HK board files to common KS2 board
directory configs: k2hk_evm: config: add common EVM configuration header
keystone: ddr3: move K2HK DDR3 configuration to a common file
ARM: keystone2: add K2E SoC hardware definitions
ARM: keystone2: clock: add K2E clock support
ARM: keystone2: add MSMC cache coherency support for K2E SOC
board: k2e-evm: add board support
Henrik Nordstrom (1):
sunxi: Add axp209 pmic support
Ian Campbell (4):
sunxi: Avoid unused variable warning.
sunxi: add Cubieboard2 support
sunxi: add gpio driver
sunxi: use setbits_le32 to enable the DMA clock
Jonathan Liu (1):
sunxi: use random parts of SID to set ethaddr
Khoronzhuk, Ivan (10):
mtd: nand: davinci: add opportunity to write keystone U-boot image
keystone: add support for NAND gpheader image
k2hk_evm: add script to automate NAND flash process
ARM: keystone2: psc: use common PSC base
keystone: ddr3: add ddr3.h to hold ddr3 API
ARM: keystone2: keystone_nav: make it dependent on keystone driver
k2hk: use common KS2_ prefix for all hardware definitions
ARM: keystone: clock: move K2HK SoC dependent code in separate
file keystone2: use CONFIG_SOC_KEYSTONE in common places
ARM: keystone2: spl: add K2E SoC support
Ma Haijun (1):
ARM: convert arch_fixup_memory_node to a generic FDT fixup
function
Marc Zyngier (10):
ARM: HYP/non-sec: move switch to non-sec to the last boot phase
ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
ARM: non-sec: reset CNTVOFF to zero
ARM: add missing HYP mode constant
ARM: HYP/non-sec: add separate section for secure code
ARM: HYP/non-sec: allow relocation to secure RAM
ARM: HYP/non-sec: add generic ARMv7 PSCI code
ARM: HYP/non-sec: add the option for a second-stage monitor
ARM: HYP/non-sec/PSCI: emit DT nodes
ARM: HYP/non-sec: remove MIDR check to validate CBAR
Masahiro Yamada (1):
zynq: disable -Wstrict-prototypes option for ps7_init.c
Michal Simek (2):
ARM: zynq: Enable generic board for Xilinx Zynq
ARM: zynq: Show ECC status on the same line as DRAM size
Mugunthan V N (3):
drivers: net: cpsw: add support for using second port as ethernet
ARM: DRA7xx: Add cpsw second port pinmux
ARM: dra7_evm: Add Ethernet support for dra72x platform
Murali Karicheri (1):
keystone2: add env option to do unitrd dt fixup
Nobuhiro Iwamatsu (4):
net: sh-eth: Add support R8A7794
serial: sh: Add support R8A7794
arm: rmobile: Add support R8A7794
arm: rmobile: Add support Alt board
Rajendra Nayak (1):
ARM: OMAP: Fix handling of errata i727
Stefan Roese (4):
net: Rename and cleanup sunxi (Allwinner) emac driver
ARM: omap: Fix GPMC init for OMAP3 platforms
ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c
ARM: omap: tao3530: Convert to generic board
Tom Rini (3):
power/pmic.h: Add prototype for power_init_board.
tps65218/am43xx_evm: Add power framework support to TPS65218
am335x_evm / gumstix pepper: Correct DDR settings
pekon gupta (3):
ARM: omap: fix GPMC address-map size for NAND and NOR devices
ARM: omap: clean redundant PISMO_xx macros used in OMAP3
ARM: omap: move board specific NAND configs out from
ti_armv7_common.h
Makefile | 6 +
arch/arm/config.mk | 2 +-
arch/arm/cpu/armv7/Makefile | 5 +
arch/arm/cpu/armv7/keystone/Makefile | 5 +-
arch/arm/cpu/armv7/keystone/clock-k2e.c | 101 ++++++++
arch/arm/cpu/armv7/keystone/clock-k2hk.c | 113 +++++++++
arch/arm/cpu/armv7/keystone/clock.c | 154 +++---------
arch/arm/cpu/armv7/keystone/cmd_clock.c | 31 ++-
arch/arm/cpu/armv7/keystone/ddr3.c | 25 +-
arch/arm/cpu/armv7/keystone/init.c | 16 +-
arch/arm/cpu/armv7/keystone/keystone.c | 87 +++++++
arch/arm/cpu/armv7/keystone/msmc.c | 6 +-
arch/arm/cpu/armv7/keystone/psc.c | 42 ++--
arch/arm/cpu/armv7/keystone/spl.c | 8 +
arch/arm/cpu/armv7/nonsec_virt.S | 168 +++++++------
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 3 +-
arch/arm/cpu/armv7/omap-common/mem-common.c | 15 +-
arch/arm/cpu/armv7/omap3/mem.c | 139 -----------
arch/arm/cpu/armv7/psci.S | 102 ++++++++
arch/arm/cpu/armv7/rmobile/Makefile | 1 +
arch/arm/cpu/armv7/rmobile/cpu_info.c | 1 +
arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c | 1513
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/sunxi/Makefile | 4 +
arch/arm/cpu/armv7/sunxi/board.c | 41 +++-
arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 3 +-
arch/arm/cpu/armv7/sunxi/cpu_info.c | 15 ++
arch/arm/cpu/armv7/sunxi/dram.c | 102 +++++++-
arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 5 +
arch/arm/cpu/armv7/sunxi/u-boot-spl.lds | 6 +
arch/arm/cpu/armv7/virt-dt.c | 100 ++++++++
arch/arm/cpu/armv7/virt-v7.c | 76 ++----
arch/arm/cpu/armv7/zynq/ddrc.c | 4 +-
arch/arm/cpu/u-boot.lds | 30 +++
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 4 -
arch/arm/include/asm/arch-am33xx/mem.h | 7 -
arch/arm/include/asm/arch-keystone/clock-k2e.h | 68 ++++++
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 23 +-
arch/arm/include/asm/arch-keystone/clock.h | 32 +++
arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +-
arch/arm/include/asm/arch-keystone/ddr3.h | 56 +++++
arch/arm/include/asm/arch-keystone/hardware-k2e.h | 44 ++++
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 182
+++++--------- arch/arm/include/asm/arch-keystone/hardware.h |
117 +++++---- arch/arm/include/asm/arch-keystone/mon.h |
15 ++ arch/arm/include/asm/arch-keystone/msmc.h | 17 ++
arch/arm/include/asm/arch-kirkwood/config.h | 3 +-
arch/arm/include/asm/arch-omap3/cpu.h | 1 -
arch/arm/include/asm/arch-omap3/mem.h | 13 -
arch/arm/include/asm/arch-rmobile/gpio.h | 3 +
arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h | 176
++++++++++++++ arch/arm/include/asm/arch-rmobile/r8a7794.h |
14 ++ arch/arm/include/asm/arch-rmobile/rcar-base.h | 4 +-
arch/arm/include/asm/arch-rmobile/rmobile.h | 2 +
arch/arm/include/asm/arch-sunxi/gpio.h | 2 +
arch/arm/include/asm/arch-sunxi/i2c.h | 15 ++
arch/arm/include/asm/arch-sunxi/timer.h | 5 +
arch/arm/include/asm/armv7.h | 11 +-
arch/arm/include/asm/omap_common.h | 8 +
arch/arm/include/asm/proc-armv/ptrace.h | 2 +
arch/arm/include/asm/psci.h | 35 +++
arch/arm/include/asm/secure.h | 26 ++
arch/arm/lib/bootm-fdt.c | 14 +-
arch/arm/lib/bootm.c | 31 ++-
arch/arm/lib/interrupts.c | 2 +-
arch/arm/lib/sections.c | 2 +
board/gumstix/pepper/board.c | 30 +--
board/renesas/alt/Makefile | 9 +
board/renesas/alt/alt.c | 173
+++++++++++++ board/renesas/alt/qos.c |
944
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/renesas/alt/qos.h | 12 +
board/sunxi/Makefile | 4 +
board/sunxi/board.c | 67 +++++
board/sunxi/dram_a13_oli_micro.c | 32 +++
board/sunxi/dram_cubieboard.c | 31 +++
board/sunxi/dram_cubieboard2.c | 31 +++
board/sunxi/dram_r7dongle.c | 31 +++
board/sunxi/gmac.c | 11 +
board/ti/am335x/board.c | 30 +--
board/ti/am43xx/board.c | 14 ++
board/ti/dra7xx/evm.c | 7 +-
board/ti/dra7xx/mux_data.h | 12 +
board/ti/k2hk_evm/Makefile | 9 -
board/ti/k2hk_evm/ddr3.c | 268
--------------------
board/ti/ks2_evm/Makefile | 13 +
board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} | 28 ++-
board/ti/{k2hk_evm => ks2_evm}/board.c | 156 ++++--------
board/ti/ks2_evm/board.h | 19 ++
board/ti/ks2_evm/board_k2e.c | 39 +++
board/ti/ks2_evm/board_k2hk.c | 81 ++++++
board/ti/ks2_evm/ddr3_cfg.c | 170
+++++++++++++ board/ti/ks2_evm/ddr3_cfg.h |
24 ++ board/ti/ks2_evm/ddr3_k2e.c | 55 +++++
board/ti/ks2_evm/ddr3_k2hk.c | 84 +++++++
board/xilinx/zynq/Makefile | 3 +
boards.cfg | 13 +-
common/image-fdt.c | 9 +-
doc/README.nand | 12 +
drivers/gpio/Makefile | 1 +
drivers/gpio/sunxi_gpio.c | 102 ++++++++
drivers/i2c/Makefile | 2 +-
drivers/i2c/mvtwsi.c | 88 ++++---
drivers/mmc/sunxi_mmc.c | 141 +----------
drivers/mtd/nand/davinci_nand.c | 196
+++++++++++++++ drivers/net/Makefile
| 2 +- drivers/net/cpsw.c | 8 +-
drivers/net/sh_eth.c | 5 +-
drivers/net/sh_eth.h | 6 +-
drivers/net/{sunxi_wemac.c => sunxi_emac.c} | 140 ++++++-----
drivers/power/Makefile | 2 +
drivers/power/axp152.c | 97 ++++++++
drivers/power/axp209.c | 167
+++++++++++++ drivers/power/pmic/pmic_tps65218.c |
22 ++ drivers/serial/ns16550.c | 4 +-
drivers/serial/serial_sh.h | 3 +-
include/axp152.h | 10 +
include/axp209.h | 14 ++
include/common.h | 6 +-
include/configs/alt.h | 166
+++++++++++++ include/configs/am335x_evm.h |
6 + include/configs/am3517_crane.h | 7 +-
include/configs/am3517_evm.h | 7 +-
include/configs/am43xx_evm.h | 2 +
include/configs/cm_t335.h | 5 +
include/configs/cm_t35.h | 3 -
include/configs/devkit8000.h | 2 -
include/configs/dig297.h | 4 -
include/configs/edminiv2.h | 3 +-
include/configs/k2e_evm.h | 37 +++
include/configs/k2hk_evm.h | 253
++----------------- include/configs/ks2_evm.h
| 275 +++++++++++++++++++++
include/configs/mcx.h | 4 -
include/configs/nokia_rx51.h | 2 -
include/configs/omap3_beagle.h | 13 +-
include/configs/omap3_evm_common.h | 7 +-
include/configs/omap3_igep00x0.h | 10 +-
include/configs/omap3_logic.h | 8 +-
include/configs/omap3_overo.h | 12 +-
include/configs/omap3_pandora.h | 7 +-
include/configs/omap3_zoom1.h | 13 +-
include/configs/pengwyn.h | 6 +
include/configs/sun4i.h | 24 ++
include/configs/sun5i.h | 24 ++
include/configs/sun7i.h | 1 +
include/configs/sunxi-common.h | 27 +-
include/configs/tam3517-common.h | 4 -
include/configs/tao3530.h | 8 +-
include/configs/ti_armv7_common.h | 8 -
include/configs/tricorder.h | 4 +-
include/configs/zynq-common.h | 2 +
include/cpsw.h | 1 +
include/netdev.h | 2 +-
include/power/pmic.h | 1 +
include/power/tps65218.h | 1 +
tools/mksunxiboot.c | 10 +- 154 files
changed, 6535 insertions(+), 1736 deletions(-) create mode 100644
arch/arm/cpu/armv7/keystone/clock-k2e.c create mode 100644
arch/arm/cpu/armv7/keystone/clock-k2hk.c create mode 100644
arch/arm/cpu/armv7/keystone/keystone.c delete mode 100644
arch/arm/cpu/armv7/omap3/mem.c create mode 100644
arch/arm/cpu/armv7/psci.S create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c create mode 100644
arch/arm/cpu/armv7/virt-dt.c create mode 100644
arch/arm/include/asm/arch-keystone/clock-k2e.h create mode 100644
arch/arm/include/asm/arch-keystone/ddr3.h create mode 100644
arch/arm/include/asm/arch-keystone/hardware-k2e.h create mode 100644
arch/arm/include/asm/arch-keystone/mon.h create mode 100644
arch/arm/include/asm/arch-keystone/msmc.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7794.h create mode 100644
arch/arm/include/asm/arch-sunxi/i2c.h create mode 100644
arch/arm/include/asm/psci.h create mode 100644
arch/arm/include/asm/secure.h create mode 100644
board/renesas/alt/Makefile create mode 100644 board/renesas/alt/alt.c
create mode 100644 board/renesas/alt/qos.c create mode 100644
board/renesas/alt/qos.h create mode 100644
board/sunxi/dram_a13_oli_micro.c create mode 100644
board/sunxi/dram_cubieboard.c create mode 100644
board/sunxi/dram_cubieboard2.c create mode 100644
board/sunxi/dram_r7dongle.c delete mode 100644
board/ti/k2hk_evm/Makefile delete mode 100644 board/ti/k2hk_evm/ddr3.c
create mode 100644 board/ti/ks2_evm/Makefile rename
board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} (80%) rename
board/ti/{k2hk_evm => ks2_evm}/board.c (65%) create mode 100644
board/ti/ks2_evm/board.h create mode 100644
board/ti/ks2_evm/board_k2e.c create mode 100644
board/ti/ks2_evm/board_k2hk.c create mode 100644
board/ti/ks2_evm/ddr3_cfg.c create mode 100644
board/ti/ks2_evm/ddr3_cfg.h create mode 100644
board/ti/ks2_evm/ddr3_k2e.c create mode 100644
board/ti/ks2_evm/ddr3_k2hk.c create mode 100644
drivers/gpio/sunxi_gpio.c rename drivers/net/{sunxi_wemac.c =>
sunxi_emac.c} (78%) create mode 100644 drivers/power/axp152.c create
mode 100644 drivers/power/axp209.c create mode 100644 include/axp152.h
create mode 100644 include/axp209.h create mode 100644
include/configs/alt.h create mode 100644 include/configs/k2e_evm.h
create mode 100644 include/configs/ks2_evm.h
create mode 100644 include/configs/sun4i.h
create mode 100644 include/configs/sun5i.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-07-05 8:18 Albert ARIBAUD
@ 2014-07-05 16:48 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-07-05 16:48 UTC (permalink / raw)
To: u-boot
On Sat, Jul 05, 2014 at 10:18:48AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 4009bed4694892716d280fcb088899b566c5c986:
>
> Reformat boards.cfg (2014-07-05 00:36:57 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 23f23f23d509e8e873797884456070c8a47d72b2:
>
> socfpga: Relocate arch common functions away from board (2014-07-05
> 10:14:46 +0200)
>
> ----------------------------------------------------------------
> Chin Liang See (1):
> socfpga: Relocate arch common functions away from board
>
> Christian Riesch (1):
> arm, calimain: Add CONFIG_SYS_GENERIC_BOARD
>
> Jeroen Hofstee (1):
> arm: spl: fix include guard
>
> Linus Walleij (1):
> integrator: switch to generic board
>
> Shaibal.Dutta (1):
> arm: Fix armv8 compilation error
>
> Stephen Warren (1):
> ARM: rpi_b: enable GENERIC_BOARD
>
> ?ukasz Da?ek (1):
> arm:board:h2200: Add CONFIG_SYS_GENERIC_BOARD
>
> arch/arm/cpu/armv7/socfpga/misc.c | 24 ++++++++++++++++++++++++
> arch/arm/include/asm/arch-keystone/spl.h | 2 +-
> arch/arm/include/asm/arch-sunxi/spl.h | 2 +-
> arch/arm/include/asm/proc-armv/system.h | 2 +-
> board/altera/socfpga/socfpga_cyclone5.c | 23 -----------------------
> include/configs/calimain.h | 3 ++-
> include/configs/h2200.h | 1 +
> include/configs/integrator-common.h | 1 +
> include/configs/rpi_b.h | 1 +
> 9 files changed, 32 insertions(+), 27 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140705/b51bc1cb/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-07-05 8:18 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
4009bed4694892716d280fcb088899b566c5c986:
Reformat boards.cfg (2014-07-05 00:36:57 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 23f23f23d509e8e873797884456070c8a47d72b2:
socfpga: Relocate arch common functions away from board (2014-07-05
10:14:46 +0200)
----------------------------------------------------------------
Chin Liang See (1):
socfpga: Relocate arch common functions away from board
Christian Riesch (1):
arm, calimain: Add CONFIG_SYS_GENERIC_BOARD
Jeroen Hofstee (1):
arm: spl: fix include guard
Linus Walleij (1):
integrator: switch to generic board
Shaibal.Dutta (1):
arm: Fix armv8 compilation error
Stephen Warren (1):
ARM: rpi_b: enable GENERIC_BOARD
?ukasz Da?ek (1):
arm:board:h2200: Add CONFIG_SYS_GENERIC_BOARD
arch/arm/cpu/armv7/socfpga/misc.c | 24 ++++++++++++++++++++++++
arch/arm/include/asm/arch-keystone/spl.h | 2 +-
arch/arm/include/asm/arch-sunxi/spl.h | 2 +-
arch/arm/include/asm/proc-armv/system.h | 2 +-
board/altera/socfpga/socfpga_cyclone5.c | 23 -----------------------
include/configs/calimain.h | 3 ++-
include/configs/h2200.h | 1 +
include/configs/integrator-common.h | 1 +
include/configs/rpi_b.h | 1 +
9 files changed, 32 insertions(+), 27 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-07-04 22:57 Albert ARIBAUD
@ 2014-07-05 0:20 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-07-05 0:20 UTC (permalink / raw)
To: u-boot
On Sat, Jul 05, 2014 at 12:57:22AM +0200, Albert ARIBAUD wrote:
> Hello,
>
> The following changes since commit
> fe8b3212b7938861eacdefe6115810303a96f9cc:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-07-02
> 16:38:02 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 4009bed4694892716d280fcb088899b566c5c986:
>
> Reformat boards.cfg (2014-07-05 00:36:57 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Reformat boards.cfg
>
> Axel Lin (1):
> gpio: spear_gpio: Fix gpio_set_value() implementation
>
> Chin Liang See (3):
> watchdog/denali: Adding DesignWare watchdog driver support
> socfpga: Adding DesignWare watchdog support
> socfpga: Adding Scan Manager driver
>
> Darwin Rambo (1):
> arm: Add support for semihosting for armv8 fastmodel targets.
>
> J. German Rivera (2):
> Added 64-bit MMIO accessors for ARMv8
> armv8/fsl-lsch3: Add support to load and start MC Firmware
>
> Jeroen Hofstee (1):
> ARM: cache_v7: use __weak
>
> Sergey Kostanbaev (1):
> arm: ep9315: Return back Cirrus Logic EDB9315A board support
>
> York Sun (3):
> ARMv8: Adjust MMU setup
> ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC
> ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board
> support
>
> README | 27 +++++
> arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 463
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> arch/arm/cpu/armv7/cache_v7.c | 45 ++------
> arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/scan_manager.c | 209
> +++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/socfpga/spl.c | 4 +
> arch/arm/cpu/armv8/cache_v8.c | 57
> +++++----- arch/arm/cpu/armv8/fsl-lsch3/Makefile |
> 9 ++ arch/arm/cpu/armv8/fsl-lsch3/README | 10 ++
> arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 436
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv8/fsl-lsch3/cpu.h | 7 ++
> arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 65
> +++++++++++ arch/arm/cpu/armv8/fsl-lsch3/speed.c |
> 176 ++++++++++++++++++++++++++++++
> arch/arm/cpu/armv8/fsl-lsch3/speed.h | 7 ++
> arch/arm/include/asm/arch-ep93xx/ep93xx.h | 85
> +++++++++++++++ arch/arm/include/asm/arch-fsl-lsch3/clock.h
> | 23 ++++ arch/arm/include/asm/arch-fsl-lsch3/config.h |
> 65 +++++++++++ arch/arm/include/asm/arch-fsl-lsch3/gpio.h
> | 9 ++ arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 116
> ++++++++++++++++++++
> arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h | 13 +++
> arch/arm/include/asm/arch-socfpga/scan_manager.h | 90
> +++++++++++++++ arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
> | 2 + arch/arm/include/asm/armv8/mmu.h | 24
> ++++ arch/arm/include/asm/cache.h | 3 +
> arch/arm/include/asm/config.h | 4 +
> arch/arm/include/asm/io.h | 8 ++
> arch/arm/include/asm/semihosting.h | 21 ++++
> arch/arm/include/asm/system.h | 2 +
> arch/arm/lib/Makefile | 1 +
> arch/arm/lib/cache-cp15.c | 9 +-
> arch/arm/lib/cache.c | 13 +--
> arch/arm/lib/semihosting.c | 233
> +++++++++++++++++++++++++++++++++++++++
> board/altera/socfpga/iocsr_config.c | 657
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/altera/socfpga/iocsr_config.h | 17 +++
> board/armltd/vexpress64/vexpress64.c | 101
> ++++++++++++++++-
> board/cirrus/edb93xx/Makefile | 11 ++
> board/cirrus/edb93xx/edb93xx.c | 382
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/cirrus/edb93xx/u-boot.lds | 115
> ++++++++++++++++++++
> board/freescale/ls2085a/Makefile | 8 ++
> board/freescale/ls2085a/README | 16 +++
> board/freescale/ls2085a/ddr.c | 175
> ++++++++++++++++++++++++++++++
> board/freescale/ls2085a/ddr.h | 57
> ++++++++++ board/freescale/ls2085a/ls2085a.c |
> 100 +++++++++++++++++
> boards.cfg | 17 ++-
> doc/README.semihosting | 54 +++++++++
> drivers/gpio/spear_gpio.c | 5 +-
> drivers/i2c/mxc_i2c.c | 5 +
> drivers/net/Makefile | 1 +
> drivers/net/fsl_mc/Makefile | 8 ++
> drivers/net/fsl_mc/mc.c | 266
> +++++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/Makefile | 1 +
> drivers/spi/ep93xx_spi.c | 274
> ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ohci-ep93xx.c | 38 +++++++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/designware_wdt.c | 74
> +++++++++++++ include/common.h
> | 5 +- include/configs/edb93xx.h | 292
> +++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/ls2085a_common.h | 226
> ++++++++++++++++++++++++++++++++++++++
> include/configs/ls2085a_emu.h | 19 ++++
> include/configs/ls2085a_simu.h | 16 +++
> include/configs/socfpga_cyclone5.h | 15 +++
> include/configs/vexpress_aemv8a.h | 63
> +++++++++-- include/fdt_support.h |
> 14 ++- include/fsl_mc.h | 59
> ++++++++++ 65 files changed, 5192 insertions(+), 139 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/socfpga/scan_manager.c create
> mode 100644 arch/arm/cpu/armv8/fsl-lsch3/Makefile create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/README create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/cpu.c create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/cpu.h create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/speed.c create mode 100644
> arch/arm/cpu/armv8/fsl-lsch3/speed.h create mode 100644
> arch/arm/include/asm/arch-fsl-lsch3/clock.h create mode 100644
> arch/arm/include/asm/arch-fsl-lsch3/config.h create mode 100644
> arch/arm/include/asm/arch-fsl-lsch3/gpio.h create mode 100644
> arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h create mode 100644
> arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h create mode 100644
> arch/arm/include/asm/arch-socfpga/scan_manager.h create mode 100644
> arch/arm/include/asm/semihosting.h create mode 100644
> arch/arm/lib/semihosting.c create mode 100644
> board/altera/socfpga/iocsr_config.c create mode 100644
> board/altera/socfpga/iocsr_config.h create mode 100644
> board/cirrus/edb93xx/Makefile create mode 100644
> board/cirrus/edb93xx/edb93xx.c create mode 100644
> board/cirrus/edb93xx/u-boot.lds create mode 100644
> board/freescale/ls2085a/Makefile create mode 100644
> board/freescale/ls2085a/README create mode 100644
> board/freescale/ls2085a/ddr.c create mode 100644
> board/freescale/ls2085a/ddr.h create mode 100644
> board/freescale/ls2085a/ls2085a.c create mode 100644
> doc/README.semihosting create mode 100644 drivers/net/fsl_mc/Makefile
> create mode 100644 drivers/net/fsl_mc/mc.c create mode 100644
> drivers/spi/ep93xx_spi.c create mode 100644
> drivers/usb/host/ohci-ep93xx.c create mode 100644
> drivers/watchdog/designware_wdt.c create mode 100644
> include/configs/edb93xx.h create mode 100644
> include/configs/ls2085a_common.h create mode 100644
> include/configs/ls2085a_emu.h create mode 100644
> include/configs/ls2085a_simu.h create mode 100644 include/fsl_mc.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140704/be41fed8/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-07-04 22:57 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit
fe8b3212b7938861eacdefe6115810303a96f9cc:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-07-02
16:38:02 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 4009bed4694892716d280fcb088899b566c5c986:
Reformat boards.cfg (2014-07-05 00:36:57 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Reformat boards.cfg
Axel Lin (1):
gpio: spear_gpio: Fix gpio_set_value() implementation
Chin Liang See (3):
watchdog/denali: Adding DesignWare watchdog driver support
socfpga: Adding DesignWare watchdog support
socfpga: Adding Scan Manager driver
Darwin Rambo (1):
arm: Add support for semihosting for armv8 fastmodel targets.
J. German Rivera (2):
Added 64-bit MMIO accessors for ARMv8
armv8/fsl-lsch3: Add support to load and start MC Firmware
Jeroen Hofstee (1):
ARM: cache_v7: use __weak
Sergey Kostanbaev (1):
arm: ep9315: Return back Cirrus Logic EDB9315A board support
York Sun (3):
ARMv8: Adjust MMU setup
ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoC
ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board
support
README | 27 +++++
arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 463
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
arch/arm/cpu/armv7/cache_v7.c | 45 ++------
arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
arch/arm/cpu/armv7/socfpga/scan_manager.c | 209
+++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/socfpga/spl.c | 4 +
arch/arm/cpu/armv8/cache_v8.c | 57
+++++----- arch/arm/cpu/armv8/fsl-lsch3/Makefile |
9 ++ arch/arm/cpu/armv8/fsl-lsch3/README | 10 ++
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 436
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv8/fsl-lsch3/cpu.h | 7 ++
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 65
+++++++++++ arch/arm/cpu/armv8/fsl-lsch3/speed.c |
176 ++++++++++++++++++++++++++++++
arch/arm/cpu/armv8/fsl-lsch3/speed.h | 7 ++
arch/arm/include/asm/arch-ep93xx/ep93xx.h | 85
+++++++++++++++ arch/arm/include/asm/arch-fsl-lsch3/clock.h
| 23 ++++ arch/arm/include/asm/arch-fsl-lsch3/config.h |
65 +++++++++++ arch/arm/include/asm/arch-fsl-lsch3/gpio.h
| 9 ++ arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 116
++++++++++++++++++++
arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h | 13 +++
arch/arm/include/asm/arch-socfpga/scan_manager.h | 90
+++++++++++++++ arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
| 2 + arch/arm/include/asm/armv8/mmu.h | 24
++++ arch/arm/include/asm/cache.h | 3 +
arch/arm/include/asm/config.h | 4 +
arch/arm/include/asm/io.h | 8 ++
arch/arm/include/asm/semihosting.h | 21 ++++
arch/arm/include/asm/system.h | 2 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/cache-cp15.c | 9 +-
arch/arm/lib/cache.c | 13 +--
arch/arm/lib/semihosting.c | 233
+++++++++++++++++++++++++++++++++++++++
board/altera/socfpga/iocsr_config.c | 657
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/altera/socfpga/iocsr_config.h | 17 +++
board/armltd/vexpress64/vexpress64.c | 101
++++++++++++++++-
board/cirrus/edb93xx/Makefile | 11 ++
board/cirrus/edb93xx/edb93xx.c | 382
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/cirrus/edb93xx/u-boot.lds | 115
++++++++++++++++++++
board/freescale/ls2085a/Makefile | 8 ++
board/freescale/ls2085a/README | 16 +++
board/freescale/ls2085a/ddr.c | 175
++++++++++++++++++++++++++++++
board/freescale/ls2085a/ddr.h | 57
++++++++++ board/freescale/ls2085a/ls2085a.c |
100 +++++++++++++++++
boards.cfg | 17 ++-
doc/README.semihosting | 54 +++++++++
drivers/gpio/spear_gpio.c | 5 +-
drivers/i2c/mxc_i2c.c | 5 +
drivers/net/Makefile | 1 +
drivers/net/fsl_mc/Makefile | 8 ++
drivers/net/fsl_mc/mc.c | 266
+++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/Makefile | 1 +
drivers/spi/ep93xx_spi.c | 274
++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ohci-ep93xx.c | 38 +++++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/designware_wdt.c | 74
+++++++++++++ include/common.h
| 5 +- include/configs/edb93xx.h | 292
+++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/ls2085a_common.h | 226
++++++++++++++++++++++++++++++++++++++
include/configs/ls2085a_emu.h | 19 ++++
include/configs/ls2085a_simu.h | 16 +++
include/configs/socfpga_cyclone5.h | 15 +++
include/configs/vexpress_aemv8a.h | 63
+++++++++-- include/fdt_support.h |
14 ++- include/fsl_mc.h | 59
++++++++++ 65 files changed, 5192 insertions(+), 139 deletions(-)
create mode 100644 arch/arm/cpu/armv7/socfpga/scan_manager.c create
mode 100644 arch/arm/cpu/armv8/fsl-lsch3/Makefile create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/README create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/cpu.c create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/cpu.h create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/speed.c create mode 100644
arch/arm/cpu/armv8/fsl-lsch3/speed.h create mode 100644
arch/arm/include/asm/arch-fsl-lsch3/clock.h create mode 100644
arch/arm/include/asm/arch-fsl-lsch3/config.h create mode 100644
arch/arm/include/asm/arch-fsl-lsch3/gpio.h create mode 100644
arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h create mode 100644
arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h create mode 100644
arch/arm/include/asm/arch-socfpga/scan_manager.h create mode 100644
arch/arm/include/asm/semihosting.h create mode 100644
arch/arm/lib/semihosting.c create mode 100644
board/altera/socfpga/iocsr_config.c create mode 100644
board/altera/socfpga/iocsr_config.h create mode 100644
board/cirrus/edb93xx/Makefile create mode 100644
board/cirrus/edb93xx/edb93xx.c create mode 100644
board/cirrus/edb93xx/u-boot.lds create mode 100644
board/freescale/ls2085a/Makefile create mode 100644
board/freescale/ls2085a/README create mode 100644
board/freescale/ls2085a/ddr.c create mode 100644
board/freescale/ls2085a/ddr.h create mode 100644
board/freescale/ls2085a/ls2085a.c create mode 100644
doc/README.semihosting create mode 100644 drivers/net/fsl_mc/Makefile
create mode 100644 drivers/net/fsl_mc/mc.c create mode 100644
drivers/spi/ep93xx_spi.c create mode 100644
drivers/usb/host/ohci-ep93xx.c create mode 100644
drivers/watchdog/designware_wdt.c create mode 100644
include/configs/edb93xx.h create mode 100644
include/configs/ls2085a_common.h create mode 100644
include/configs/ls2085a_emu.h create mode 100644
include/configs/ls2085a_simu.h create mode 100644 include/fsl_mc.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-07-02 20:33 Albert ARIBAUD
@ 2014-07-02 22:38 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-07-02 22:38 UTC (permalink / raw)
To: u-boot
On Wed, Jul 02, 2014 at 10:33:16PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> ba9b42c81b0734d53edfbb1fe4a6ded7de78c5ab:
>
> Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 (2014-06-24
> 14:06:22 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 304f936aeaab0c3cc9d5af438fd3498ac7682991:
>
> Merge remote-tracking branch 'u-boot-samsung/master' (2014-07-01
> 20:52:51 +0200)
>
> ----------------------------------------------------------------
>
> Akshay Saraswat (9):
> Exynos5: DMC: Modify the definition of ddr3_mem_ctrl_init
> Exynos5420: Remove code for enabling read leveling
> Exynos5420: DMC: Add software read leveling
> Exynos: SPI: Fix reading data from SPI flash
> Exynos5420: Let macros be used for exynos5420
> Exynos5420: Introduce support for the Peach-Pit board
> Exynos5: Config: Place environment at the end of SPI flash
> Exynos5: Config: Increase SPL footprint for Exynos5420
> Exynos5: Config: Enable USB boot mode for all Exynos5 SoCs
>
> Albert ARIBAUD (8):
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge remote-tracking branch 'u-boot-samsung/master'
>
> Alison Wang (2):
> arm: vf610: Add QSPI driver support
> arm: imx: Add two macros for VF610 in IOMUX_PAD structure
>
> Andreas Bie?mann (2):
> avr32: migrate cache functions
> macb: make checkpatch clean
>
> Ash Charles (3):
> omap: Don't enable GPMC CS0 with nothing attached
> omap4: duovero: Correct name of default device tree
> omap3: overo: Select fdtfile for expansion board
>
> Axel Lin (1):
> spi: davinci: Fix register address for SPI1_BUS
>
> Chao Fu (1):
> arm: vf610: Add QSPI support for VF610TWR
>
> Doug Anderson (1):
> DMC: exynos5420: Gate CLKM to when reading PHY_CON13
>
> Eric Nelson (1):
> serial_mxc: disable new features of autobaud detection
>
> Fabio Estevam (10):
> mx6sabreauto: Add the mx6dual-lite variant
> mx6sabred: Add PFUZE100 PMIC support
> mx25pdk: Add generic board support
> mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
> embestmx6boards: Fix CONFIG_CONSOLE_DEV
> embestmx6boards: Fix the dtb file name for riotboard
> mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
> mx28evk: Add a target for SPI NOR boot
> mx28evk: Add documentation on how to boot from SPI NOR
> mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD
>
> Felipe Balbi (5):
> board: ti: am43xx: print unsupported board name
> cpu: armv7: am33x: ddr: write emif ref_ctrl_shadow register
> board: ti: am43xx: add support for AM43xx Starter Kit
> board: ti: am43xx: add AM437x SK PHY Address
> board: ti: am43xx: enable QSPI and Gbit Ethernet on AM437x SK
>
> Jeroen Hofstee (4):
> tegra20: display: fix checking of return value
> ARM: tegra: fix include guard
> omap3: board: trivial: add void for no args
> PMIC: MAX77686: fix invalid bus check
>
> Khoronzhuk, Ivan (2):
> mtd: nand: davinci: add header file for driver definitions
> ARM: keystone: aemif: move aemif driver to
> drivers/memory/ti-aemif.c
>
> Marek Vasut (1):
> arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
>
> Mark Rutland (1):
> arm64: zero cntvoff_el2
>
> Masahiro Yamada (3):
> spl: consolidate arch/arm/include/asm/arch-*/spl.h
> arm: fix a double-definition error of _start symbol
> arm: zynq: fix a bug in Zynq linker script
>
> Michael Pratt (1):
> Exynos: Split 5250 and 5420 memory bank configuration
>
> Minkyu Kang (1):
> Revert "exynos: Enable PSHOLD in SPL"
>
> Nobuhiro Iwamatsu (2):
> arm: rmobile: koelsch: Remove NOR-Flash support from boards.cfg
> arm: rmobile: lager: Remove NOR-Flash support from boards.cfg
>
> Przemyslaw Marczak (2):
> trats/trats2: exynos_power_init: return 0 if no battery detected.
> Samsung: Goni: change maintainer to Robert Baldyga
>
> Shawn Guo (1):
> mx6: drop ARM errata 742230
>
> Stefano Babic (4):
> MX25: fix build due to missing sys_proto.h
> imx: correct HAB status for new chip TO
> OMAP: disable gpmc timeout safely for reenabling
> vf610: fix build due to missing sys_proto.h
>
> Stephen Warren (2):
> ARM: tegra: fix extlinux.conf search location
> ARM: tegra: set initrd_high so boot scripts work
>
> Steve Rae (1):
> arm: bcm281xx: Add CONFIG_SYS_GENERIC_BOARD
>
> Tim Harvey (12):
> spl: nand: add support for mxs nand
> mx6: add common SPL configuration
> mx6: add boot device support for SPL
> imx: add comments and remove unused struct fields
> mx6: add structs for mmdc and ddr iomux registers
> mx6: add mmdc configuration for MX6Q/MX6DL
> imx: iomux: add macros to setup iomux for multiple SoC types
> imx: ventana: split read_eeprom into standalone file
> imx: ventana: auto-configure for IMX6Q vs IMX6DL
> imx: ventana: switch to SPL
> dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
> imx: sata: return failure if not IMX6Q/IMX6D
>
> Tim Schendekehl (1):
> arm: ethernut5: convert to generic board
>
> Tushar Behera (1):
> Arndale: Enable preboot support
>
> Wu, Josh (3):
> net: macb: enable dcache in macb
> video: atmel_hlcdfb: enable dcache support
> ARMv7: at91: enable ICache and DCache.
>
> ?ukasz Majewski (2):
> FIX: config: goni: Change goni configuration to use Tizen's THOR
> downlodader FIX: config: goni: Change goni configuration to store envs
> at eMMC
>
> arch/arm/cpu/arm720t/tegra-common/spl.c
> | 2 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
> | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
> | 1 +
> arch/arm/cpu/armv7/am33xx/ddr.c
> | 1 +
> arch/arm/cpu/armv7/at91/cpu.c
> | 2 +
> arch/arm/cpu/armv7/exynos/dmc_common.c
> | 2 +-
> arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
> | 369 +++++++++++++++++++++++++++++++++++++++++-------------
> arch/arm/cpu/armv7/exynos/exynos5_setup.h
> | 21 ++--
> arch/arm/cpu/armv7/exynos/lowlevel_init.c
> | 2 -
> arch/arm/cpu/armv7/keystone/Makefile
> | 1 -
> arch/arm/cpu/armv7/mx6/Makefile
> | 1 +
> arch/arm/cpu/armv7/mx6/ddr.c
> | 490
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/mx6/hab.c
> | 73 +++++++++--
> arch/arm/cpu/armv7/omap-common/mem-common.c
> | 6 +-
> arch/arm/cpu/armv7/omap3/board.c
> | 4 +-
> arch/arm/cpu/armv7/tegra20/display.c
> | 2 +-
> arch/arm/cpu/armv7/zynq/u-boot.lds
> | 1 +
> arch/arm/cpu/armv8/transition.S
> | 2 +-
> arch/arm/dts/Makefile
> | 3 +-
> arch/arm/dts/exynos5420-peach-pit.dts
> | 127 +++++++++++++++++++
> arch/arm/dts/exynos5420-smdk5420.dts
> | 23 +---
> arch/arm/dts/exynos5420.dtsi
> | 70 -----------
> arch/arm/dts/exynos54xx.dtsi
> | 151 +++++++++++++++++++++++
> arch/arm/imx-common/Makefile
> | 1 +
> arch/arm/imx-common/cpu.c
> | 16 ++-
> arch/arm/imx-common/iomux-v3.c
> | 18 ++-
> arch/arm/imx-common/sata.c
> | 7 +-
> arch/arm/imx-common/spl.c
> | 81 ++++++++++++
> arch/arm/include/asm/arch-at91/spl.h
> | 24 ----
> arch/arm/include/asm/arch-davinci/emif_defs.h
> | 72 -----------
> arch/arm/include/asm/arch-davinci/hardware.h
> | 1 -
> arch/arm/include/asm/arch-davinci/nand_defs.h
> | 38 ------
> arch/arm/include/asm/arch-davinci/spl.h
> | 16 ---
> arch/arm/include/asm/arch-exynos/dmc.h
> | 3 +
> arch/arm/include/asm/arch-exynos/power.h
> | 4 +-
> arch/arm/include/asm/arch-keystone/hardware-k2hk.h
> | 7 --
> arch/arm/include/asm/arch-keystone/hardware.h
> | 30 +----
> arch/arm/include/asm/arch-keystone/nand_defs.h
> | 23 ----
> arch/arm/include/asm/arch-mx35/spl.h
> | 22 ----
> arch/arm/include/asm/arch-mx5/spl.h
> | 13 --
> arch/arm/include/asm/arch-mx6/hab.h
> | 17 ++-
> arch/arm/include/asm/arch-mx6/imx-regs.h
> | 2 +
> arch/arm/include/asm/arch-mx6/iomux.h
> | 2 +-
> arch/arm/include/asm/arch-mx6/mx6-ddr.h
> | 231 ++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h
> | 4 +-
> arch/arm/include/asm/arch-tegra114/spl.h
> | 22 ----
> arch/arm/include/asm/arch-tegra124/spl.h
> | 13 --
> arch/arm/include/asm/arch-tegra20/spl.h
> | 12 --
> arch/arm/include/asm/arch-tegra30/spl.h
> | 12 --
> arch/arm/include/asm/arch-tnetv107x/emif_defs.h
> | 1 -
> arch/arm/include/asm/arch-tnetv107x/hardware.h
> | 2 +
> arch/arm/include/asm/arch-tnetv107x/nand_defs.h
> | 23 ----
> arch/arm/include/asm/arch-vf610/crm_regs.h
> | 11 +-
> arch/arm/include/asm/arch-vf610/imx-regs.h
> | 4 +-
> arch/arm/include/asm/arch-vf610/iomux-vf610.h
> | 17 ++-
> arch/arm/include/asm/imx-common/iomux-v3.h
> | 27 ++++
> arch/arm/include/asm/spl.h
> | 20 +++ arch/arm/include/asm/{arch-keystone/emif_defs.h =>
> ti-common/davinci_nand.h} | 55 ++++++---
> arch/arm/include/asm/ti-common/ti-aemif.h
> | 39 ++++++
> arch/arm/lib/vectors.S
> | 2 -
> arch/avr32/cpu/cache.c
> | 20 +--
> arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
> | 2 -
> arch/avr32/include/asm/dma-mapping.h
> | 6 +-
> arch/avr32/lib/board.c
> | 4 +-
> board/Barix/ipam390/ipam390.c
> | 2 +-
> board/ait/cam_enc_4xx/cam_enc_4xx.c
> | 2 +-
> board/davinci/da8xxevm/da830evm.c
> | 3 +-
> board/davinci/da8xxevm/da850evm.c
> | 2 +-
> board/davinci/dm355evm/dm355evm.c
> | 3 +-
> board/davinci/dm355leopard/dm355leopard.c
> | 2 +-
> board/davinci/dm365evm/dm365evm.c
> | 3 +-
> board/davinci/dm6467evm/dm6467evm.c
> | 3 +-
> board/davinci/ea20/ea20.c
> | 2 +-
> board/davinci/sonata/sonata.c
> | 2 +-
> board/denx/m53evk/m53evk.c
> | 2 +-
> board/enbw/enbw_cmc/enbw_cmc.c
> | 2 +-
> board/freescale/mx28evk/README
> | 22 +++-
> board/freescale/mx6qsabreauto/mx6dl.cfg
> | 130 +++++++++++++++++++
> board/freescale/mx6sabresd/mx6sabresd.c
> | 84 +++++++++++++
> board/freescale/vf610twr/vf610twr.c
> | 29 ++++-
> board/gateworks/gw_ventana/Makefile
> | 3 +-
> board/gateworks/gw_ventana/README
> | 92 +++++++++-----
> board/gateworks/gw_ventana/eeprom.c
> | 89 +++++++++++++
> board/gateworks/gw_ventana/gw_ventana.c
> | 597
> +++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
> board/gateworks/gw_ventana/gw_ventana.cfg
> | 15 ---
> board/gateworks/gw_ventana/gw_ventana_spl.c
> | 419 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/gateworks/gw_ventana/ventana_eeprom.h
> | 11 ++
> board/omicron/calimain/calimain.c
> | 2 +-
> board/overo/overo.c
> | 14 +++
> board/samsung/trats/trats.c
> | 2 +-
> board/samsung/trats2/trats2.c
> | 2 +-
> board/ti/am43xx/board.c
> | 79 +++++++++++-
> board/ti/am43xx/board.h
> | 5 +
> board/ti/am43xx/mux.c
> | 3 +
> board/ti/k2hk_evm/board.c
> | 10 +-
> board/ti/tnetv107xevm/sdb_board.c
> | 2 +-
> boards.cfg
> | 13 +-
> doc/README.mxs
> | 26 ++++
> drivers/Makefile
> | 1 +
> drivers/block/dwc_ahsata.c
> | 5 +
> drivers/memory/Makefile
> | 1 + arch/arm/cpu/armv7/keystone/aemif.c =>
> drivers/memory/ti-aemif.c | 37 +++---
> drivers/mtd/nand/Makefile
> | 1 +
> drivers/mtd/nand/davinci_nand.c
> | 3 +-
> drivers/mtd/nand/mxs_nand_spl.c
> | 231 ++++++++++++++++++++++++++++++++++
> drivers/net/macb.c
> | 113 ++++++++++++-----
> drivers/power/pmic/pmic_max77686.c
> | 13 +-
> drivers/serial/serial_mxc.c
> | 4 +-
> drivers/spi/Makefile
> | 1 +
> drivers/spi/davinci_spi.c
> | 2 +-
> drivers/spi/exynos_spi.c
> | 5 +-
> drivers/spi/fsl_qspi.c
> | 482
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/fsl_qspi.h
> | 127 +++++++++++++++++++
> drivers/video/atmel_hlcdfb.c
> | 6 +
> include/configs/am43xx_evm.h
> | 2 +
> include/configs/arndale.h
> | 2 +
> include/configs/bcm28155_ap.h
> | 1 +
> include/configs/davinci_dm6467evm.h
> | 2 +
> include/configs/embestmx6boards.h
> | 4 +-
> include/configs/ethernut5.h
> | 2 +
> include/configs/exynos5-dt.h
> | 15 ++-
> include/configs/exynos5250-dt.h
> | 13 +-
> include/configs/exynos5420.h
> | 52 ++++++++
> include/configs/gw_ventana.h
> | 11 ++
> include/configs/imx6_spl.h
> | 71 +++++++++++
> include/configs/k2hk_evm.h
> | 6 +
> include/configs/m53evk.h
> | 1 +
> include/configs/mx28evk.h
> | 5 +-
> include/configs/mx6_common.h
> | 1 -
> include/configs/mx6qsabreauto.h
> | 4 +
> include/configs/mx6sabresd.h
> | 12 ++
> include/configs/omap3_overo.h
> | 10 +-
> include/configs/peach-pit.h
> | 25 ++++
> include/configs/s5p_goni.h
> | 17 ++-
> include/configs/smdk5420.h
> | 49 ++------
> include/configs/tegra-common-post.h
> | 9 +-
> include/configs/tegra-common-ums.h
> | 2 +-
> include/configs/ti_omap4_common.h
> | 2 +-
> include/configs/vf610twr.h
> | 12 ++
> include/power/pfuze100_pmic.h
> | 4 + 140 files changed, 4245 insertions(+), 1078 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c create mode 100644
> arch/arm/dts/exynos5420-peach-pit.dts delete mode 100644
> arch/arm/dts/exynos5420.dtsi create mode 100644
> arch/arm/dts/exynos54xx.dtsi create mode 100644
> arch/arm/imx-common/spl.c delete mode 100644
> arch/arm/include/asm/arch-at91/spl.h delete mode 100644
> arch/arm/include/asm/arch-davinci/emif_defs.h delete mode 100644
> arch/arm/include/asm/arch-davinci/nand_defs.h delete mode 100644
> arch/arm/include/asm/arch-davinci/spl.h delete mode 100644
> arch/arm/include/asm/arch-keystone/nand_defs.h delete mode 100644
> arch/arm/include/asm/arch-mx35/spl.h delete mode 100644
> arch/arm/include/asm/arch-mx5/spl.h delete mode 100644
> arch/arm/include/asm/arch-tegra114/spl.h delete mode 100644
> arch/arm/include/asm/arch-tegra124/spl.h delete mode 100644
> arch/arm/include/asm/arch-tegra20/spl.h delete mode 100644
> arch/arm/include/asm/arch-tegra30/spl.h delete mode 100644
> arch/arm/include/asm/arch-tnetv107x/emif_defs.h delete mode 100644
> arch/arm/include/asm/arch-tnetv107x/nand_defs.h rename
> arch/arm/include/asm/{arch-keystone/emif_defs.h =>
> ti-common/davinci_nand.h} (56%) create mode 100644
> arch/arm/include/asm/ti-common/ti-aemif.h create mode 100644
> board/freescale/mx6qsabreauto/mx6dl.cfg create mode 100644
> board/gateworks/gw_ventana/eeprom.c create mode 100644
> board/gateworks/gw_ventana/gw_ventana_spl.c create mode 100644
> drivers/memory/Makefile rename arch/arm/cpu/armv7/keystone/aemif.c =>
> drivers/memory/ti-aemif.c (63%) create mode 100644
> drivers/mtd/nand/mxs_nand_spl.c create mode 100644
> drivers/spi/fsl_qspi.c create mode 100644 drivers/spi/fsl_qspi.h
> create mode 100644 include/configs/exynos5420.h create mode 100644
> include/configs/imx6_spl.h create mode 100644
> include/configs/peach-pit.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140702/585b9d9e/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-07-02 20:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
ba9b42c81b0734d53edfbb1fe4a6ded7de78c5ab:
Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 (2014-06-24
14:06:22 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 304f936aeaab0c3cc9d5af438fd3498ac7682991:
Merge remote-tracking branch 'u-boot-samsung/master' (2014-07-01
20:52:51 +0200)
----------------------------------------------------------------
Akshay Saraswat (9):
Exynos5: DMC: Modify the definition of ddr3_mem_ctrl_init
Exynos5420: Remove code for enabling read leveling
Exynos5420: DMC: Add software read leveling
Exynos: SPI: Fix reading data from SPI flash
Exynos5420: Let macros be used for exynos5420
Exynos5420: Introduce support for the Peach-Pit board
Exynos5: Config: Place environment at the end of SPI flash
Exynos5: Config: Increase SPL footprint for Exynos5420
Exynos5: Config: Enable USB boot mode for all Exynos5 SoCs
Albert ARIBAUD (8):
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-samsung/master'
Alison Wang (2):
arm: vf610: Add QSPI driver support
arm: imx: Add two macros for VF610 in IOMUX_PAD structure
Andreas Bie?mann (2):
avr32: migrate cache functions
macb: make checkpatch clean
Ash Charles (3):
omap: Don't enable GPMC CS0 with nothing attached
omap4: duovero: Correct name of default device tree
omap3: overo: Select fdtfile for expansion board
Axel Lin (1):
spi: davinci: Fix register address for SPI1_BUS
Chao Fu (1):
arm: vf610: Add QSPI support for VF610TWR
Doug Anderson (1):
DMC: exynos5420: Gate CLKM to when reading PHY_CON13
Eric Nelson (1):
serial_mxc: disable new features of autobaud detection
Fabio Estevam (10):
mx6sabreauto: Add the mx6dual-lite variant
mx6sabred: Add PFUZE100 PMIC support
mx25pdk: Add generic board support
mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
embestmx6boards: Fix CONFIG_CONSOLE_DEV
embestmx6boards: Fix the dtb file name for riotboard
mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
mx28evk: Add a target for SPI NOR boot
mx28evk: Add documentation on how to boot from SPI NOR
mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD
Felipe Balbi (5):
board: ti: am43xx: print unsupported board name
cpu: armv7: am33x: ddr: write emif ref_ctrl_shadow register
board: ti: am43xx: add support for AM43xx Starter Kit
board: ti: am43xx: add AM437x SK PHY Address
board: ti: am43xx: enable QSPI and Gbit Ethernet on AM437x SK
Jeroen Hofstee (4):
tegra20: display: fix checking of return value
ARM: tegra: fix include guard
omap3: board: trivial: add void for no args
PMIC: MAX77686: fix invalid bus check
Khoronzhuk, Ivan (2):
mtd: nand: davinci: add header file for driver definitions
ARM: keystone: aemif: move aemif driver to
drivers/memory/ti-aemif.c
Marek Vasut (1):
arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
Mark Rutland (1):
arm64: zero cntvoff_el2
Masahiro Yamada (3):
spl: consolidate arch/arm/include/asm/arch-*/spl.h
arm: fix a double-definition error of _start symbol
arm: zynq: fix a bug in Zynq linker script
Michael Pratt (1):
Exynos: Split 5250 and 5420 memory bank configuration
Minkyu Kang (1):
Revert "exynos: Enable PSHOLD in SPL"
Nobuhiro Iwamatsu (2):
arm: rmobile: koelsch: Remove NOR-Flash support from boards.cfg
arm: rmobile: lager: Remove NOR-Flash support from boards.cfg
Przemyslaw Marczak (2):
trats/trats2: exynos_power_init: return 0 if no battery detected.
Samsung: Goni: change maintainer to Robert Baldyga
Shawn Guo (1):
mx6: drop ARM errata 742230
Stefano Babic (4):
MX25: fix build due to missing sys_proto.h
imx: correct HAB status for new chip TO
OMAP: disable gpmc timeout safely for reenabling
vf610: fix build due to missing sys_proto.h
Stephen Warren (2):
ARM: tegra: fix extlinux.conf search location
ARM: tegra: set initrd_high so boot scripts work
Steve Rae (1):
arm: bcm281xx: Add CONFIG_SYS_GENERIC_BOARD
Tim Harvey (12):
spl: nand: add support for mxs nand
mx6: add common SPL configuration
mx6: add boot device support for SPL
imx: add comments and remove unused struct fields
mx6: add structs for mmdc and ddr iomux registers
mx6: add mmdc configuration for MX6Q/MX6DL
imx: iomux: add macros to setup iomux for multiple SoC types
imx: ventana: split read_eeprom into standalone file
imx: ventana: auto-configure for IMX6Q vs IMX6DL
imx: ventana: switch to SPL
dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
imx: sata: return failure if not IMX6Q/IMX6D
Tim Schendekehl (1):
arm: ethernut5: convert to generic board
Tushar Behera (1):
Arndale: Enable preboot support
Wu, Josh (3):
net: macb: enable dcache in macb
video: atmel_hlcdfb: enable dcache support
ARMv7: at91: enable ICache and DCache.
?ukasz Majewski (2):
FIX: config: goni: Change goni configuration to use Tizen's THOR
downlodader FIX: config: goni: Change goni configuration to store envs
at eMMC
arch/arm/cpu/arm720t/tegra-common/spl.c
| 2 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
| 2 +-
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
| 1 +
arch/arm/cpu/armv7/am33xx/ddr.c
| 1 +
arch/arm/cpu/armv7/at91/cpu.c
| 2 +
arch/arm/cpu/armv7/exynos/dmc_common.c
| 2 +-
arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
| 369 +++++++++++++++++++++++++++++++++++++++++-------------
arch/arm/cpu/armv7/exynos/exynos5_setup.h
| 21 ++--
arch/arm/cpu/armv7/exynos/lowlevel_init.c
| 2 -
arch/arm/cpu/armv7/keystone/Makefile
| 1 -
arch/arm/cpu/armv7/mx6/Makefile
| 1 +
arch/arm/cpu/armv7/mx6/ddr.c
| 490
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/mx6/hab.c
| 73 +++++++++--
arch/arm/cpu/armv7/omap-common/mem-common.c
| 6 +-
arch/arm/cpu/armv7/omap3/board.c
| 4 +-
arch/arm/cpu/armv7/tegra20/display.c
| 2 +-
arch/arm/cpu/armv7/zynq/u-boot.lds
| 1 +
arch/arm/cpu/armv8/transition.S
| 2 +-
arch/arm/dts/Makefile
| 3 +-
arch/arm/dts/exynos5420-peach-pit.dts
| 127 +++++++++++++++++++
arch/arm/dts/exynos5420-smdk5420.dts
| 23 +---
arch/arm/dts/exynos5420.dtsi
| 70 -----------
arch/arm/dts/exynos54xx.dtsi
| 151 +++++++++++++++++++++++
arch/arm/imx-common/Makefile
| 1 +
arch/arm/imx-common/cpu.c
| 16 ++-
arch/arm/imx-common/iomux-v3.c
| 18 ++-
arch/arm/imx-common/sata.c
| 7 +-
arch/arm/imx-common/spl.c
| 81 ++++++++++++
arch/arm/include/asm/arch-at91/spl.h
| 24 ----
arch/arm/include/asm/arch-davinci/emif_defs.h
| 72 -----------
arch/arm/include/asm/arch-davinci/hardware.h
| 1 -
arch/arm/include/asm/arch-davinci/nand_defs.h
| 38 ------
arch/arm/include/asm/arch-davinci/spl.h
| 16 ---
arch/arm/include/asm/arch-exynos/dmc.h
| 3 +
arch/arm/include/asm/arch-exynos/power.h
| 4 +-
arch/arm/include/asm/arch-keystone/hardware-k2hk.h
| 7 --
arch/arm/include/asm/arch-keystone/hardware.h
| 30 +----
arch/arm/include/asm/arch-keystone/nand_defs.h
| 23 ----
arch/arm/include/asm/arch-mx35/spl.h
| 22 ----
arch/arm/include/asm/arch-mx5/spl.h
| 13 --
arch/arm/include/asm/arch-mx6/hab.h
| 17 ++-
arch/arm/include/asm/arch-mx6/imx-regs.h
| 2 +
arch/arm/include/asm/arch-mx6/iomux.h
| 2 +-
arch/arm/include/asm/arch-mx6/mx6-ddr.h
| 231 ++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h
| 4 +-
arch/arm/include/asm/arch-tegra114/spl.h
| 22 ----
arch/arm/include/asm/arch-tegra124/spl.h
| 13 --
arch/arm/include/asm/arch-tegra20/spl.h
| 12 --
arch/arm/include/asm/arch-tegra30/spl.h
| 12 --
arch/arm/include/asm/arch-tnetv107x/emif_defs.h
| 1 -
arch/arm/include/asm/arch-tnetv107x/hardware.h
| 2 +
arch/arm/include/asm/arch-tnetv107x/nand_defs.h
| 23 ----
arch/arm/include/asm/arch-vf610/crm_regs.h
| 11 +-
arch/arm/include/asm/arch-vf610/imx-regs.h
| 4 +-
arch/arm/include/asm/arch-vf610/iomux-vf610.h
| 17 ++-
arch/arm/include/asm/imx-common/iomux-v3.h
| 27 ++++
arch/arm/include/asm/spl.h
| 20 +++ arch/arm/include/asm/{arch-keystone/emif_defs.h =>
ti-common/davinci_nand.h} | 55 ++++++---
arch/arm/include/asm/ti-common/ti-aemif.h
| 39 ++++++
arch/arm/lib/vectors.S
| 2 -
arch/avr32/cpu/cache.c
| 20 +--
arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
| 2 -
arch/avr32/include/asm/dma-mapping.h
| 6 +-
arch/avr32/lib/board.c
| 4 +-
board/Barix/ipam390/ipam390.c
| 2 +-
board/ait/cam_enc_4xx/cam_enc_4xx.c
| 2 +-
board/davinci/da8xxevm/da830evm.c
| 3 +-
board/davinci/da8xxevm/da850evm.c
| 2 +-
board/davinci/dm355evm/dm355evm.c
| 3 +-
board/davinci/dm355leopard/dm355leopard.c
| 2 +-
board/davinci/dm365evm/dm365evm.c
| 3 +-
board/davinci/dm6467evm/dm6467evm.c
| 3 +-
board/davinci/ea20/ea20.c
| 2 +-
board/davinci/sonata/sonata.c
| 2 +-
board/denx/m53evk/m53evk.c
| 2 +-
board/enbw/enbw_cmc/enbw_cmc.c
| 2 +-
board/freescale/mx28evk/README
| 22 +++-
board/freescale/mx6qsabreauto/mx6dl.cfg
| 130 +++++++++++++++++++
board/freescale/mx6sabresd/mx6sabresd.c
| 84 +++++++++++++
board/freescale/vf610twr/vf610twr.c
| 29 ++++-
board/gateworks/gw_ventana/Makefile
| 3 +-
board/gateworks/gw_ventana/README
| 92 +++++++++-----
board/gateworks/gw_ventana/eeprom.c
| 89 +++++++++++++
board/gateworks/gw_ventana/gw_ventana.c
| 597
+++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
board/gateworks/gw_ventana/gw_ventana.cfg
| 15 ---
board/gateworks/gw_ventana/gw_ventana_spl.c
| 419 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/gateworks/gw_ventana/ventana_eeprom.h
| 11 ++
board/omicron/calimain/calimain.c
| 2 +-
board/overo/overo.c
| 14 +++
board/samsung/trats/trats.c
| 2 +-
board/samsung/trats2/trats2.c
| 2 +-
board/ti/am43xx/board.c
| 79 +++++++++++-
board/ti/am43xx/board.h
| 5 +
board/ti/am43xx/mux.c
| 3 +
board/ti/k2hk_evm/board.c
| 10 +-
board/ti/tnetv107xevm/sdb_board.c
| 2 +-
boards.cfg
| 13 +-
doc/README.mxs
| 26 ++++
drivers/Makefile
| 1 +
drivers/block/dwc_ahsata.c
| 5 +
drivers/memory/Makefile
| 1 + arch/arm/cpu/armv7/keystone/aemif.c =>
drivers/memory/ti-aemif.c | 37 +++---
drivers/mtd/nand/Makefile
| 1 +
drivers/mtd/nand/davinci_nand.c
| 3 +-
drivers/mtd/nand/mxs_nand_spl.c
| 231 ++++++++++++++++++++++++++++++++++
drivers/net/macb.c
| 113 ++++++++++++-----
drivers/power/pmic/pmic_max77686.c
| 13 +-
drivers/serial/serial_mxc.c
| 4 +-
drivers/spi/Makefile
| 1 +
drivers/spi/davinci_spi.c
| 2 +-
drivers/spi/exynos_spi.c
| 5 +-
drivers/spi/fsl_qspi.c
| 482
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/fsl_qspi.h
| 127 +++++++++++++++++++
drivers/video/atmel_hlcdfb.c
| 6 +
include/configs/am43xx_evm.h
| 2 +
include/configs/arndale.h
| 2 +
include/configs/bcm28155_ap.h
| 1 +
include/configs/davinci_dm6467evm.h
| 2 +
include/configs/embestmx6boards.h
| 4 +-
include/configs/ethernut5.h
| 2 +
include/configs/exynos5-dt.h
| 15 ++-
include/configs/exynos5250-dt.h
| 13 +-
include/configs/exynos5420.h
| 52 ++++++++
include/configs/gw_ventana.h
| 11 ++
include/configs/imx6_spl.h
| 71 +++++++++++
include/configs/k2hk_evm.h
| 6 +
include/configs/m53evk.h
| 1 +
include/configs/mx28evk.h
| 5 +-
include/configs/mx6_common.h
| 1 -
include/configs/mx6qsabreauto.h
| 4 +
include/configs/mx6sabresd.h
| 12 ++
include/configs/omap3_overo.h
| 10 +-
include/configs/peach-pit.h
| 25 ++++
include/configs/s5p_goni.h
| 17 ++-
include/configs/smdk5420.h
| 49 ++------
include/configs/tegra-common-post.h
| 9 +-
include/configs/tegra-common-ums.h
| 2 +-
include/configs/ti_omap4_common.h
| 2 +-
include/configs/vf610twr.h
| 12 ++
include/power/pfuze100_pmic.h
| 4 + 140 files changed, 4245 insertions(+), 1078 deletions(-)
create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c create mode 100644
arch/arm/dts/exynos5420-peach-pit.dts delete mode 100644
arch/arm/dts/exynos5420.dtsi create mode 100644
arch/arm/dts/exynos54xx.dtsi create mode 100644
arch/arm/imx-common/spl.c delete mode 100644
arch/arm/include/asm/arch-at91/spl.h delete mode 100644
arch/arm/include/asm/arch-davinci/emif_defs.h delete mode 100644
arch/arm/include/asm/arch-davinci/nand_defs.h delete mode 100644
arch/arm/include/asm/arch-davinci/spl.h delete mode 100644
arch/arm/include/asm/arch-keystone/nand_defs.h delete mode 100644
arch/arm/include/asm/arch-mx35/spl.h delete mode 100644
arch/arm/include/asm/arch-mx5/spl.h delete mode 100644
arch/arm/include/asm/arch-tegra114/spl.h delete mode 100644
arch/arm/include/asm/arch-tegra124/spl.h delete mode 100644
arch/arm/include/asm/arch-tegra20/spl.h delete mode 100644
arch/arm/include/asm/arch-tegra30/spl.h delete mode 100644
arch/arm/include/asm/arch-tnetv107x/emif_defs.h delete mode 100644
arch/arm/include/asm/arch-tnetv107x/nand_defs.h rename
arch/arm/include/asm/{arch-keystone/emif_defs.h =>
ti-common/davinci_nand.h} (56%) create mode 100644
arch/arm/include/asm/ti-common/ti-aemif.h create mode 100644
board/freescale/mx6qsabreauto/mx6dl.cfg create mode 100644
board/gateworks/gw_ventana/eeprom.c create mode 100644
board/gateworks/gw_ventana/gw_ventana_spl.c create mode 100644
drivers/memory/Makefile rename arch/arm/cpu/armv7/keystone/aemif.c =>
drivers/memory/ti-aemif.c (63%) create mode 100644
drivers/mtd/nand/mxs_nand_spl.c create mode 100644
drivers/spi/fsl_qspi.c create mode 100644 drivers/spi/fsl_qspi.h
create mode 100644 include/configs/exynos5420.h create mode 100644
include/configs/imx6_spl.h create mode 100644
include/configs/peach-pit.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-06-08 7:51 Albert ARIBAUD
@ 2014-06-09 2:25 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-06-09 2:25 UTC (permalink / raw)
To: u-boot
On Sun, Jun 08, 2014 at 09:51:16AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 9637a1bb896efe392a58dd2772e2c3fcb646409d:
>
> ARM: at91sam9m10g45ek: add mmc environment configuration support
> (2014-05-27 00:10:55 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 5ed28948a3ffe6c735386e59c132989869beaa3e:
>
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-06-08
> 09:14:19 +0200)
>
> ----------------------------------------------------------------
>
> Aaron Durbin (3):
> exynos5: Enable tps65090 on exynos5-dt
> power: Explicitly select pmic device's bus
> exynos5: support tps65090 pmic
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>
> Beomho Seo (3):
> arm: exynos: pinmux: add sdmmc4 gpio configratuion
> arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
> board: trats2: Enable device tree on Trats2
>
> Brian Norris (2):
> mtd: nand: don't use read_buf for 8-bit ONFI transfers
> mtd: nand: force NAND_CMD_READID onto 8-bit bus
>
> David Mosberger (1):
> mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
>
> Doug Anderson (1):
> Exynos: Make sure ps_hold gets set in the SPL
>
> Hannes Petermaier (6):
> arch-am33xx: Add defines for timer0-7
> board/BuR/common: introduce usage of CONFIG_SYS_GENERIC_BOARD
> board/BuR/tseries: Add support for using 8-bit on eMMC
> board/BuR/tseries: only run gpmc_init(...) in NAND-build
> board/BuR/common: Add CONFIG_CMD_I2C
> board/BuR/tseries: cosmetic changes
>
> Jaehoon Chung (12):
> ARM: exynos: board: change the mmc/sd init sequence
> ARM: exynos: clock: modify the set_mmc_clk for exynos4
> ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMC
> mmc: exynos_dw_mmc: restore the property into host
> mmc: remove the unnecessary define and fix the wrong bit control
> mmc: support the DDR mode for eMMC
> mmc: dw_mmc: support the DDR mode
> ARM: dts: exnyos: enable dw-mmc controller
> mmc: exynos_dw_mmc: enable the DDR mode
> ARM: exynos4: enable the dwmmc configuration
> mmc: s5p_sdhci: add the s5p_sdhci_core_init function
> ARM: exynos5420: removed undefined gpio structure
>
> Jeroen Hofstee (1):
> tam3517: fix NAND detection
>
> Lokesh Vutla (2):
> ARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS
> ARM: AM43xx: Fix UART clocks enabling
>
> Mateusz Zalega (4):
> arm: goni: Update configuration for Goni target
> arm: goni: dfu: Add support for DFU to Goni target
> arm: goni: enable GPT command
> arm: goni: enable USB Mass Storage
>
> Murali Karicheri (1):
> keystone: init: enable UART1 to be able use it from kernel
>
> Piotr Wilczek (1):
> arm:board:exynos4: add CONFIG_SYS_GENERIC_BOARD
>
> Simon Glass (8):
> exynos: dts: Correct EC interrupt GPIO
> exynos: Drop old smdk5250.c file
> power: Rename CONFIG_PMIC_... to CONFIG_POWER_...
> power: Add PMIC_ prefix to CHARGER_EN/DISABLE
> exynos: Enable PSHOLD in SPL
> exynos: dts: Enable LCD for snow
> exynos: Enable the LCD backlight for snow
> initcall: Improve debugging support
>
> Sourav Poddar (2):
> am43xx_evm: Add qspiboot target
> ti: qspi: populate slave device to set flash quad bit.
>
> Stephen Warren (1):
> ARM: tegra: enable USB device mode and UMS on some boards
>
> Tom Rini (6):
> arm:am33xx: Make dram_init call sdram_init() in some contexts
> arm:am33xx: Rework s_init and add board_early_init_f
> am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR
> arm:am33xx: Add a scale_vcores() hook
> power: Add support for the TPS65218 PMIC
> arm:am43xx: Add TPS65218 support to scale voltages up
>
> Tom Wai-Hong Tam (1):
> power: Add support for TPS65090 PMU chip.
>
> WingMan Kwok (1):
> keystone: k2hk: enable support of nand ecclayout command
>
> pekon gupta (12):
> mtd: nand: omap_elm: remove #include omap_gpmc.h
> mtd: nand: omap_elm: use bch_type instead of nibble count to
> differentiate between BCH4/BCH8/BCH16 mtd: nand: omap_elm: use macros
> for register definitions mtd: nand: omap_gpmc: remove unused members of
> 'struct nand_bch_priv' mtd: nand: omap_gpmc: rename struct
> nand_bch_priv to struct omap_nand_info mtd: nand: omap_gpmc: minor
> cleanup of omap_correct_data_bch mtd: nand: omap: fix error-codes
> returned from omap-elm driver mtd: nand: omap: add
> CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width omap3:
> remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and
> GPMC_NAND_ECC_LP_x16_LAYOUT mtd: nand: omap_gpmc: use macro for
> register definitions mtd: nand: omap: add support for BCH16_ECC - NAND
> driver updates am335x: update README for BCH16
>
> arch/arm/cpu/armv7/am33xx/board.c | 20 +-
> arch/arm/cpu/armv7/am33xx/clock.c | 11 +
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 9 +
> arch/arm/cpu/armv7/am33xx/emif4.c | 4 +
> arch/arm/cpu/armv7/exynos/clock.c | 45 +--
> arch/arm/cpu/armv7/exynos/lowlevel_init.c | 8 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 35 +-
> arch/arm/cpu/armv7/exynos/power.c | 6 +
> arch/arm/cpu/armv7/keystone/init.c | 9 +
> arch/arm/cpu/armv7/omap3/mem.c | 12 -
> arch/arm/dts/exynos4.dtsi | 8 +
> arch/arm/dts/exynos4412-trats2.dts | 12 +
> arch/arm/dts/exynos5.dtsi | 8 +-
> arch/arm/dts/exynos5250-snow.dts | 61 +++-
> arch/arm/dts/tegra124-jetson-tk1.dts | 9 +-
> arch/arm/dts/tegra124-venice2.dts | 9 +-
> arch/arm/dts/tegra30-beaver.dts | 9 +-
> arch/arm/include/asm/arch-am33xx/clock.h | 1 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 35 +-
> arch/arm/include/asm/arch-exynos/clk.h | 5 +
> arch/arm/include/asm/arch-exynos/power.h | 1 +
> arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 -
> arch/arm/include/asm/arch-keystone/hardware.h | 3 +
> arch/arm/include/asm/arch-omap3/mem.h | 8 -
> board/BuR/tseries/board.c | 2 +
> board/BuR/tseries/mux.c | 9 +-
> board/compulab/cm_t35/cm_t35.c | 12 +-
> board/samsung/common/board.c | 13 +-
> board/samsung/goni/goni.c | 8 +
> board/samsung/smdk5250/Makefile | 4 -
> board/samsung/smdk5250/exynos5-dt.c | 238 +++++++++++++-
> board/samsung/smdk5250/smdk5250.c | 363
> ---------------------
> board/samsung/smdk5420/smdk5420.c | 3 -
> board/ti/am43xx/Makefile | 2 +-
> board/ti/am43xx/board.c | 55 +++-
> boards.cfg | 1 +
> doc/README.nand | 60 ++++
> doc/device-tree-bindings/exynos/dwmmc.txt | 8 +-
> doc/device-tree-bindings/power/tps65090.txt | 17 +
> doc/device-tree-bindings/regulator/tps65090.txt | 122 +++++++
> drivers/mmc/dw_mmc.c | 12 +-
> drivers/mmc/exynos_dw_mmc.c | 205 +++++++-----
> drivers/mmc/mmc.c | 16 +-
> drivers/mmc/s5p_sdhci.c | 42 +--
> drivers/mtd/nand/am335x_spl_bch.c | 2 +-
> drivers/mtd/nand/atmel_nand.c | 2 +-
> drivers/mtd/nand/nand_base.c | 11 +-
> drivers/mtd/nand/nand_spl_simple.c | 2 +-
> drivers/mtd/nand/omap_elm.c | 28 +-
> drivers/mtd/nand/omap_gpmc.c | 193 +++++++----
> drivers/power/battery/bat_trats.c | 4 +-
> drivers/power/battery/bat_trats2.c | 2 +-
> drivers/power/mfd/pmic_max77693.c | 2 +-
> drivers/power/pmic/Makefile | 2 +
> drivers/power/pmic/pmic_max8997.c | 2 +-
> drivers/power/pmic/pmic_tps65090.c | 310
> ++++++++++++++++++ drivers/power/pmic/pmic_tps65218.c
> | 97 ++++++ drivers/power/power_fsl.c | 6
> +- drivers/power/power_i2c.c | 4 +
> drivers/spi/ti_qspi.c | 1 +
> include/configs/am3517_crane.h | 1 +
> include/configs/am43xx_evm.h | 45 ++-
> include/configs/arndale.h | 4 +-
> include/configs/beaver.h | 2 +
> include/configs/bur_am335x_common.h | 4 +-
> include/configs/cm_t335.h | 1 -
> include/configs/cm_t35.h | 1 -
> include/configs/devkit8000.h | 1 +
> include/configs/dig297.h | 1 +
> include/configs/exynos4-dt.h | 4 +
> include/configs/exynos5-dt.h | 1 +
> include/configs/exynos5250-dt.h | 2 +-
> include/configs/jetson-tk1.h | 2 +
> include/configs/k2hk_evm.h | 4 +-
> include/configs/mx25pdk.h | 2 +-
> include/configs/mx35pdk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/omap3_beagle.h | 1 +
> include/configs/omap3_evm_common.h | 2 +-
> include/configs/omap3_igep00x0.h | 1 +
> include/configs/omap3_logic.h | 1 +
> include/configs/omap3_overo.h | 1 +
> include/configs/omap3_zoom1.h | 1 +
> include/configs/pengwyn.h | 1 -
> include/configs/s5p_goni.h | 113 +++++--
> include/configs/tam3517-common.h | 2 +
> include/configs/tao3530.h | 2 +-
> include/configs/tegra-common-ums.h | 26 ++
> include/configs/ti_am335x_common.h | 9 +
> include/configs/ti_armv7_common.h | 3 +-
> include/configs/tseries.h | 1 -
> include/configs/venice2.h | 2 +
> include/configs/woodburn_common.h | 2 +-
> include/dwmmc.h | 5 +
> include/fdtdec.h | 4 +-
> include/initcall.h | 2 +-
> include/linux/mtd/nand.h | 19 ++
> include/linux/mtd/omap_elm.h | 11 +-
> include/linux/mtd/omap_gpmc.h | 11 +-
> include/mmc.h | 25 +-
> include/power/max77693_pmic.h | 2 -
> include/power/max8997_pmic.h | 1 -
> include/power/pmic.h | 5 +
> include/power/tps65090_pmic.h | 73 +++++
> include/power/tps65218.h | 63 ++++
> lib/fdtdec.c | 4 +-
> lib/initcall.c | 17 +- 108 files
> changed, 1918 insertions(+), 763 deletions(-) delete mode 100644
> board/samsung/smdk5250/smdk5250.c create mode 100644
> doc/device-tree-bindings/power/tps65090.txt create mode 100644
> doc/device-tree-bindings/regulator/tps65090.txt create mode 100644
> drivers/power/pmic/pmic_tps65090.c create mode 100644
> drivers/power/pmic/pmic_tps65218.c create mode 100644
> include/configs/tegra-common-ums.h create mode 100644
> include/power/tps65090_pmic.h create mode 100644
> include/power/tps65218.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140608/f7625983/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-06-08 7:51 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
9637a1bb896efe392a58dd2772e2c3fcb646409d:
ARM: at91sam9m10g45ek: add mmc environment configuration support
(2014-05-27 00:10:55 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 5ed28948a3ffe6c735386e59c132989869beaa3e:
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-06-08
09:14:19 +0200)
----------------------------------------------------------------
Aaron Durbin (3):
exynos5: Enable tps65090 on exynos5-dt
power: Explicitly select pmic device's bus
exynos5: support tps65090 pmic
Albert ARIBAUD (2):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Beomho Seo (3):
arm: exynos: pinmux: add sdmmc4 gpio configratuion
arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
board: trats2: Enable device tree on Trats2
Brian Norris (2):
mtd: nand: don't use read_buf for 8-bit ONFI transfers
mtd: nand: force NAND_CMD_READID onto 8-bit bus
David Mosberger (1):
mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
Doug Anderson (1):
Exynos: Make sure ps_hold gets set in the SPL
Hannes Petermaier (6):
arch-am33xx: Add defines for timer0-7
board/BuR/common: introduce usage of CONFIG_SYS_GENERIC_BOARD
board/BuR/tseries: Add support for using 8-bit on eMMC
board/BuR/tseries: only run gpmc_init(...) in NAND-build
board/BuR/common: Add CONFIG_CMD_I2C
board/BuR/tseries: cosmetic changes
Jaehoon Chung (12):
ARM: exynos: board: change the mmc/sd init sequence
ARM: exynos: clock: modify the set_mmc_clk for exynos4
ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMC
mmc: exynos_dw_mmc: restore the property into host
mmc: remove the unnecessary define and fix the wrong bit control
mmc: support the DDR mode for eMMC
mmc: dw_mmc: support the DDR mode
ARM: dts: exnyos: enable dw-mmc controller
mmc: exynos_dw_mmc: enable the DDR mode
ARM: exynos4: enable the dwmmc configuration
mmc: s5p_sdhci: add the s5p_sdhci_core_init function
ARM: exynos5420: removed undefined gpio structure
Jeroen Hofstee (1):
tam3517: fix NAND detection
Lokesh Vutla (2):
ARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS
ARM: AM43xx: Fix UART clocks enabling
Mateusz Zalega (4):
arm: goni: Update configuration for Goni target
arm: goni: dfu: Add support for DFU to Goni target
arm: goni: enable GPT command
arm: goni: enable USB Mass Storage
Murali Karicheri (1):
keystone: init: enable UART1 to be able use it from kernel
Piotr Wilczek (1):
arm:board:exynos4: add CONFIG_SYS_GENERIC_BOARD
Simon Glass (8):
exynos: dts: Correct EC interrupt GPIO
exynos: Drop old smdk5250.c file
power: Rename CONFIG_PMIC_... to CONFIG_POWER_...
power: Add PMIC_ prefix to CHARGER_EN/DISABLE
exynos: Enable PSHOLD in SPL
exynos: dts: Enable LCD for snow
exynos: Enable the LCD backlight for snow
initcall: Improve debugging support
Sourav Poddar (2):
am43xx_evm: Add qspiboot target
ti: qspi: populate slave device to set flash quad bit.
Stephen Warren (1):
ARM: tegra: enable USB device mode and UMS on some boards
Tom Rini (6):
arm:am33xx: Make dram_init call sdram_init() in some contexts
arm:am33xx: Rework s_init and add board_early_init_f
am43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR
arm:am33xx: Add a scale_vcores() hook
power: Add support for the TPS65218 PMIC
arm:am43xx: Add TPS65218 support to scale voltages up
Tom Wai-Hong Tam (1):
power: Add support for TPS65090 PMU chip.
WingMan Kwok (1):
keystone: k2hk: enable support of nand ecclayout command
pekon gupta (12):
mtd: nand: omap_elm: remove #include omap_gpmc.h
mtd: nand: omap_elm: use bch_type instead of nibble count to
differentiate between BCH4/BCH8/BCH16 mtd: nand: omap_elm: use macros
for register definitions mtd: nand: omap_gpmc: remove unused members of
'struct nand_bch_priv' mtd: nand: omap_gpmc: rename struct
nand_bch_priv to struct omap_nand_info mtd: nand: omap_gpmc: minor
cleanup of omap_correct_data_bch mtd: nand: omap: fix error-codes
returned from omap-elm driver mtd: nand: omap: add
CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width omap3:
remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and
GPMC_NAND_ECC_LP_x16_LAYOUT mtd: nand: omap_gpmc: use macro for
register definitions mtd: nand: omap: add support for BCH16_ECC - NAND
driver updates am335x: update README for BCH16
arch/arm/cpu/armv7/am33xx/board.c | 20 +-
arch/arm/cpu/armv7/am33xx/clock.c | 11 +
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 9 +
arch/arm/cpu/armv7/am33xx/emif4.c | 4 +
arch/arm/cpu/armv7/exynos/clock.c | 45 +--
arch/arm/cpu/armv7/exynos/lowlevel_init.c | 8 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 35 +-
arch/arm/cpu/armv7/exynos/power.c | 6 +
arch/arm/cpu/armv7/keystone/init.c | 9 +
arch/arm/cpu/armv7/omap3/mem.c | 12 -
arch/arm/dts/exynos4.dtsi | 8 +
arch/arm/dts/exynos4412-trats2.dts | 12 +
arch/arm/dts/exynos5.dtsi | 8 +-
arch/arm/dts/exynos5250-snow.dts | 61 +++-
arch/arm/dts/tegra124-jetson-tk1.dts | 9 +-
arch/arm/dts/tegra124-venice2.dts | 9 +-
arch/arm/dts/tegra30-beaver.dts | 9 +-
arch/arm/include/asm/arch-am33xx/clock.h | 1 +
arch/arm/include/asm/arch-am33xx/cpu.h | 35 +-
arch/arm/include/asm/arch-exynos/clk.h | 5 +
arch/arm/include/asm/arch-exynos/power.h | 1 +
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 2 -
arch/arm/include/asm/arch-keystone/hardware.h | 3 +
arch/arm/include/asm/arch-omap3/mem.h | 8 -
board/BuR/tseries/board.c | 2 +
board/BuR/tseries/mux.c | 9 +-
board/compulab/cm_t35/cm_t35.c | 12 +-
board/samsung/common/board.c | 13 +-
board/samsung/goni/goni.c | 8 +
board/samsung/smdk5250/Makefile | 4 -
board/samsung/smdk5250/exynos5-dt.c | 238 +++++++++++++-
board/samsung/smdk5250/smdk5250.c | 363
---------------------
board/samsung/smdk5420/smdk5420.c | 3 -
board/ti/am43xx/Makefile | 2 +-
board/ti/am43xx/board.c | 55 +++-
boards.cfg | 1 +
doc/README.nand | 60 ++++
doc/device-tree-bindings/exynos/dwmmc.txt | 8 +-
doc/device-tree-bindings/power/tps65090.txt | 17 +
doc/device-tree-bindings/regulator/tps65090.txt | 122 +++++++
drivers/mmc/dw_mmc.c | 12 +-
drivers/mmc/exynos_dw_mmc.c | 205 +++++++-----
drivers/mmc/mmc.c | 16 +-
drivers/mmc/s5p_sdhci.c | 42 +--
drivers/mtd/nand/am335x_spl_bch.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
drivers/mtd/nand/nand_base.c | 11 +-
drivers/mtd/nand/nand_spl_simple.c | 2 +-
drivers/mtd/nand/omap_elm.c | 28 +-
drivers/mtd/nand/omap_gpmc.c | 193 +++++++----
drivers/power/battery/bat_trats.c | 4 +-
drivers/power/battery/bat_trats2.c | 2 +-
drivers/power/mfd/pmic_max77693.c | 2 +-
drivers/power/pmic/Makefile | 2 +
drivers/power/pmic/pmic_max8997.c | 2 +-
drivers/power/pmic/pmic_tps65090.c | 310
++++++++++++++++++ drivers/power/pmic/pmic_tps65218.c
| 97 ++++++ drivers/power/power_fsl.c | 6
+- drivers/power/power_i2c.c | 4 +
drivers/spi/ti_qspi.c | 1 +
include/configs/am3517_crane.h | 1 +
include/configs/am43xx_evm.h | 45 ++-
include/configs/arndale.h | 4 +-
include/configs/beaver.h | 2 +
include/configs/bur_am335x_common.h | 4 +-
include/configs/cm_t335.h | 1 -
include/configs/cm_t35.h | 1 -
include/configs/devkit8000.h | 1 +
include/configs/dig297.h | 1 +
include/configs/exynos4-dt.h | 4 +
include/configs/exynos5-dt.h | 1 +
include/configs/exynos5250-dt.h | 2 +-
include/configs/jetson-tk1.h | 2 +
include/configs/k2hk_evm.h | 4 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/omap3_beagle.h | 1 +
include/configs/omap3_evm_common.h | 2 +-
include/configs/omap3_igep00x0.h | 1 +
include/configs/omap3_logic.h | 1 +
include/configs/omap3_overo.h | 1 +
include/configs/omap3_zoom1.h | 1 +
include/configs/pengwyn.h | 1 -
include/configs/s5p_goni.h | 113 +++++--
include/configs/tam3517-common.h | 2 +
include/configs/tao3530.h | 2 +-
include/configs/tegra-common-ums.h | 26 ++
include/configs/ti_am335x_common.h | 9 +
include/configs/ti_armv7_common.h | 3 +-
include/configs/tseries.h | 1 -
include/configs/venice2.h | 2 +
include/configs/woodburn_common.h | 2 +-
include/dwmmc.h | 5 +
include/fdtdec.h | 4 +-
include/initcall.h | 2 +-
include/linux/mtd/nand.h | 19 ++
include/linux/mtd/omap_elm.h | 11 +-
include/linux/mtd/omap_gpmc.h | 11 +-
include/mmc.h | 25 +-
include/power/max77693_pmic.h | 2 -
include/power/max8997_pmic.h | 1 -
include/power/pmic.h | 5 +
include/power/tps65090_pmic.h | 73 +++++
include/power/tps65218.h | 63 ++++
lib/fdtdec.c | 4 +-
lib/initcall.c | 17 +- 108 files
changed, 1918 insertions(+), 763 deletions(-) delete mode 100644
board/samsung/smdk5250/smdk5250.c create mode 100644
doc/device-tree-bindings/power/tps65090.txt create mode 100644
doc/device-tree-bindings/regulator/tps65090.txt create mode 100644
drivers/power/pmic/pmic_tps65090.c create mode 100644
drivers/power/pmic/pmic_tps65218.c create mode 100644
include/configs/tegra-common-ums.h create mode 100644
include/power/tps65090_pmic.h create mode 100644
include/power/tps65218.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-05-30 15:20 Albert ARIBAUD
@ 2014-05-30 17:59 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-05-30 17:59 UTC (permalink / raw)
To: u-boot
On Fri, May 30, 2014 at 05:20:48PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 9665fa8f9e1488209d5e01d0792c243e0a220c5a:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-24
> 06:34:08 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
>
> ARM: at91sam9m10g45ek: add mmc environment configuration support
> (2014-05-27 00:10:55 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (4):
> corvus: remove unneeded CONFIG_AT91_LEGACY
> mkimage: add atmelimage
> arm:at91: enable ROM loadable atmel image
> sama5d3xek: enable PMECC header generation
>
> Bo Shen (6):
> ARM: atmel: switch to main crystal osc for SPL boot
> ARM: atmel: enable SPL on sama5d3_xplained board
> ARM: atmel: sama5d3xek: convert to generic board
> ARM: atmel: sama5d3_xplained: convert to generic board
> ARM: atmel: at91sam9m10g45ek: convert to generic board
> ARM: atmel: at91sam9x5ek: convert to generic board
>
> David Feng (1):
> Arm64 fix a bug of vbar_el3 initialization
>
> Ian Campbell (12):
> sunxi: add sun7i clocks and timer support.
> sunxi: add sun7i pinmux and gpio support
> sunxi: add sun7i dram setup support
> sunxi: add sun7i cpu, board and start of day support
> sunxi: add support for Cubietruck booting in FEL mode
> sunxi: add gmac Ethernet support
> sunxi: mmc support
> sunxi: non-FEL SPL boot support for sun7i
> net/designware: ensure device private data is DMA aligned.
> net/designware: ensure cache invalidations are aligned to
> ARCH_DMA_MINALIGN net/designware: reorder struct dw_eth_dev to pack
> more efficiently. net/designware: Make DMA burst length configurable
> and reduce by default
>
> Michael Walle (2):
> lsxl: use 64bit for LBA48 to support 4 TB drives
> lsxl: rework boot scripts
>
> Rob Herring (2):
> ARM: highbank: convert to generic board
> boards.cfg: update highbank maintainer email
>
> Stefan Agner (1):
> arm: vf610: add DDR_SEL_PAD_CONTR register
>
> Wu, Josh (8):
> gpio: at91: add sanity check for the NULL pointer
> mmc: atmel_mci: fix print incorrect buffer content for debug
> ARM: at91: remove AT91X40 macro since it is not use any more
> ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
> at91: remove redundant AT91FAMILY definition in board config file
> ARM: at91: remove redundant ARM926EJS definition in board config
> files ARM: at91sam9m10g45ek: enable mci0 support
> ARM: at91sam9m10g45ek: add mmc environment configuration support
>
> Makefile | 10 ++
> arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 ++++
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/at91/config.mk | 10 ++
> arch/arm/cpu/armv7/sunxi/Makefile | 25 +++++
> arch/arm/cpu/armv7/sunxi/board.c | 111
> +++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/clock.c | 25 +++++
> arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 188
> ++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/config.mk | 8 ++
> arch/arm/cpu/armv7/sunxi/cpu_info.c | 19 ++++
> arch/arm/cpu/armv7/sunxi/dram.c | 593
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/pinmux.c | 61
> ++++++++++++ arch/arm/cpu/armv7/sunxi/start.c |
> 1 + arch/arm/cpu/armv7/sunxi/timer.c | 113
> ++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 77
> +++++++++++++++ arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
> | 52 ++++++++++ arch/arm/cpu/armv8/start.S
> | 4 +- arch/arm/cpu/at91-common/spl.c | 39
> ++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
> arch/arm/include/asm/arch-at91/hardware.h | 2 -
> arch/arm/include/asm/arch-sunxi/clock.h | 29 ++++++
> arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 256
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/cpu.h | 122
> +++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/dram.h | 179
> ++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/gpio.h | 147
> ++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/mmc.h | 124
> ++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/spl.h | 20 ++++
> arch/arm/include/asm/arch-sunxi/sys_proto.h | 16 +++
> arch/arm/include/asm/arch-sunxi/timer.h | 88
> +++++++++++++++++ arch/arm/include/asm/arch-vf610/imx-regs.h
> | 1 + board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 ++
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87
> +++++++++++++++++ board/freescale/vf610twr/vf610twr.c
> | 3 +- board/sunxi/Makefile | 13
> +++ board/sunxi/board.c | 120
> +++++++++++++++++++++++
> board/sunxi/dram_cubietruck.c | 31 ++++++
> board/sunxi/gmac.c | 32 ++++++
> boards.cfg | 5 +-
> common/image.c | 1 +
> doc/README.atmel_pmecc | 21 ++++
> drivers/gpio/at91_gpio.c | 3 +-
> drivers/mmc/Makefile | 1 +
> drivers/mmc/gen_atmel_mci.c | 5 +-
> drivers/mmc/sunxi_mmc.c | 503
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/designware.c | 23 +++--
> drivers/net/designware.h | 23 +++--
> include/configs/at91sam9m10g45ek.h | 37 ++++++-
> include/configs/at91sam9n12ek.h | 3 -
> include/configs/at91sam9x5ek.h | 3 +-
> include/configs/corvus.h | 3 -
> include/configs/cpu9260.h | 1 -
> include/configs/ethernut5.h | 2 -
> include/configs/highbank.h | 1 +
> include/configs/lsxl.h | 41 ++++++--
> include/configs/sama5d3_xplained.h | 53 +++++++++-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/sun7i.h | 24 +++++
> include/configs/sunxi-common.h | 195
> +++++++++++++++++++++++++++++++++++++
> include/configs/vl_ma2sc.h | 2 -
> include/image.h | 1 +
> include/netdev.h | 1 +
> spl/Makefile | 24 +++++
> tools/.gitignore | 1 +
> tools/Makefile | 5 +
> tools/atmel_pmecc_params.c | 51 ++++++++++
> tools/atmelimage.c | 342
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tools/imagetool.c | 2 +
> tools/imagetool.h | 1 +
> tools/mksunxiboot.c | 142
> +++++++++++++++++++++++++++ 70 files changed, 4112 insertions(+), 54
> deletions(-) create mode 100644 arch/arm/cpu/armv7/at91/config.mk
> create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode
> 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644
> arch/arm/cpu/armv7/sunxi/clock.c create mode 100644
> arch/arm/cpu/armv7/sunxi/clock_sun4i.c create mode 100644
> arch/arm/cpu/armv7/sunxi/config.mk create mode 100644
> arch/arm/cpu/armv7/sunxi/cpu_info.c create mode 100644
> arch/arm/cpu/armv7/sunxi/dram.c create mode 100644
> arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644
> arch/arm/cpu/armv7/sunxi/start.c create mode 100644
> arch/arm/cpu/armv7/sunxi/timer.c create mode 100644
> arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds create mode 100644
> arch/arm/cpu/armv7/sunxi/u-boot-spl.lds create mode 100644
> arch/arm/include/asm/arch-sunxi/clock.h create mode 100644
> arch/arm/include/asm/arch-sunxi/clock_sun4i.h create mode 100644
> arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644
> arch/arm/include/asm/arch-sunxi/dram.h create mode 100644
> arch/arm/include/asm/arch-sunxi/gpio.h create mode 100644
> arch/arm/include/asm/arch-sunxi/mmc.h create mode 100644
> arch/arm/include/asm/arch-sunxi/spl.h create mode 100644
> arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644
> arch/arm/include/asm/arch-sunxi/timer.h create mode 100644
> board/sunxi/Makefile create mode 100644 board/sunxi/board.c create
> mode 100644 board/sunxi/dram_cubietruck.c create mode 100644
> board/sunxi/gmac.c create mode 100644 drivers/mmc/sunxi_mmc.c create
> mode 100644 include/configs/sun7i.h create mode 100644
> include/configs/sunxi-common.h create mode 100644
> tools/atmel_pmecc_params.c create mode 100644 tools/atmelimage.c
> create mode 100644 tools/mksunxiboot.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140530/c5767b07/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-05-30 15:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
9665fa8f9e1488209d5e01d0792c243e0a220c5a:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-24
06:34:08 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
ARM: at91sam9m10g45ek: add mmc environment configuration support
(2014-05-27 00:10:55 +0200)
----------------------------------------------------------------
Andreas Bie?mann (4):
corvus: remove unneeded CONFIG_AT91_LEGACY
mkimage: add atmelimage
arm:at91: enable ROM loadable atmel image
sama5d3xek: enable PMECC header generation
Bo Shen (6):
ARM: atmel: switch to main crystal osc for SPL boot
ARM: atmel: enable SPL on sama5d3_xplained board
ARM: atmel: sama5d3xek: convert to generic board
ARM: atmel: sama5d3_xplained: convert to generic board
ARM: atmel: at91sam9m10g45ek: convert to generic board
ARM: atmel: at91sam9x5ek: convert to generic board
David Feng (1):
Arm64 fix a bug of vbar_el3 initialization
Ian Campbell (12):
sunxi: add sun7i clocks and timer support.
sunxi: add sun7i pinmux and gpio support
sunxi: add sun7i dram setup support
sunxi: add sun7i cpu, board and start of day support
sunxi: add support for Cubietruck booting in FEL mode
sunxi: add gmac Ethernet support
sunxi: mmc support
sunxi: non-FEL SPL boot support for sun7i
net/designware: ensure device private data is DMA aligned.
net/designware: ensure cache invalidations are aligned to
ARCH_DMA_MINALIGN net/designware: reorder struct dw_eth_dev to pack
more efficiently. net/designware: Make DMA burst length configurable
and reduce by default
Michael Walle (2):
lsxl: use 64bit for LBA48 to support 4 TB drives
lsxl: rework boot scripts
Rob Herring (2):
ARM: highbank: convert to generic board
boards.cfg: update highbank maintainer email
Stefan Agner (1):
arm: vf610: add DDR_SEL_PAD_CONTR register
Wu, Josh (8):
gpio: at91: add sanity check for the NULL pointer
mmc: atmel_mci: fix print incorrect buffer content for debug
ARM: at91: remove AT91X40 macro since it is not use any more
ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
at91: remove redundant AT91FAMILY definition in board config file
ARM: at91: remove redundant ARM926EJS definition in board config
files ARM: at91sam9m10g45ek: enable mci0 support
ARM: at91sam9m10g45ek: add mmc environment configuration support
Makefile | 10 ++
arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 ++++
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/at91/config.mk | 10 ++
arch/arm/cpu/armv7/sunxi/Makefile | 25 +++++
arch/arm/cpu/armv7/sunxi/board.c | 111
+++++++++++++++++++++
arch/arm/cpu/armv7/sunxi/clock.c | 25 +++++
arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 188
++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/sunxi/config.mk | 8 ++
arch/arm/cpu/armv7/sunxi/cpu_info.c | 19 ++++
arch/arm/cpu/armv7/sunxi/dram.c | 593
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/sunxi/pinmux.c | 61
++++++++++++ arch/arm/cpu/armv7/sunxi/start.c |
1 + arch/arm/cpu/armv7/sunxi/timer.c | 113
++++++++++++++++++++++
arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 77
+++++++++++++++ arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
| 52 ++++++++++ arch/arm/cpu/armv8/start.S
| 4 +- arch/arm/cpu/at91-common/spl.c | 39
++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
arch/arm/include/asm/arch-at91/hardware.h | 2 -
arch/arm/include/asm/arch-sunxi/clock.h | 29 ++++++
arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 256
++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/cpu.h | 122
+++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/dram.h | 179
++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/gpio.h | 147
++++++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/mmc.h | 124
++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/spl.h | 20 ++++
arch/arm/include/asm/arch-sunxi/sys_proto.h | 16 +++
arch/arm/include/asm/arch-sunxi/timer.h | 88
+++++++++++++++++ arch/arm/include/asm/arch-vf610/imx-regs.h
| 1 + board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 ++
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87
+++++++++++++++++ board/freescale/vf610twr/vf610twr.c
| 3 +- board/sunxi/Makefile | 13
+++ board/sunxi/board.c | 120
+++++++++++++++++++++++
board/sunxi/dram_cubietruck.c | 31 ++++++
board/sunxi/gmac.c | 32 ++++++
boards.cfg | 5 +-
common/image.c | 1 +
doc/README.atmel_pmecc | 21 ++++
drivers/gpio/at91_gpio.c | 3 +-
drivers/mmc/Makefile | 1 +
drivers/mmc/gen_atmel_mci.c | 5 +-
drivers/mmc/sunxi_mmc.c | 503
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/designware.c | 23 +++--
drivers/net/designware.h | 23 +++--
include/configs/at91sam9m10g45ek.h | 37 ++++++-
include/configs/at91sam9n12ek.h | 3 -
include/configs/at91sam9x5ek.h | 3 +-
include/configs/corvus.h | 3 -
include/configs/cpu9260.h | 1 -
include/configs/ethernut5.h | 2 -
include/configs/highbank.h | 1 +
include/configs/lsxl.h | 41 ++++++--
include/configs/sama5d3_xplained.h | 53 +++++++++-
include/configs/sama5d3xek.h | 4 +-
include/configs/sun7i.h | 24 +++++
include/configs/sunxi-common.h | 195
+++++++++++++++++++++++++++++++++++++
include/configs/vl_ma2sc.h | 2 -
include/image.h | 1 +
include/netdev.h | 1 +
spl/Makefile | 24 +++++
tools/.gitignore | 1 +
tools/Makefile | 5 +
tools/atmel_pmecc_params.c | 51 ++++++++++
tools/atmelimage.c | 342
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/imagetool.c | 2 +
tools/imagetool.h | 1 +
tools/mksunxiboot.c | 142
+++++++++++++++++++++++++++ 70 files changed, 4112 insertions(+), 54
deletions(-) create mode 100644 arch/arm/cpu/armv7/at91/config.mk
create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode
100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644
arch/arm/cpu/armv7/sunxi/clock.c create mode 100644
arch/arm/cpu/armv7/sunxi/clock_sun4i.c create mode 100644
arch/arm/cpu/armv7/sunxi/config.mk create mode 100644
arch/arm/cpu/armv7/sunxi/cpu_info.c create mode 100644
arch/arm/cpu/armv7/sunxi/dram.c create mode 100644
arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644
arch/arm/cpu/armv7/sunxi/start.c create mode 100644
arch/arm/cpu/armv7/sunxi/timer.c create mode 100644
arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds create mode 100644
arch/arm/cpu/armv7/sunxi/u-boot-spl.lds create mode 100644
arch/arm/include/asm/arch-sunxi/clock.h create mode 100644
arch/arm/include/asm/arch-sunxi/clock_sun4i.h create mode 100644
arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644
arch/arm/include/asm/arch-sunxi/dram.h create mode 100644
arch/arm/include/asm/arch-sunxi/gpio.h create mode 100644
arch/arm/include/asm/arch-sunxi/mmc.h create mode 100644
arch/arm/include/asm/arch-sunxi/spl.h create mode 100644
arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644
arch/arm/include/asm/arch-sunxi/timer.h create mode 100644
board/sunxi/Makefile create mode 100644 board/sunxi/board.c create
mode 100644 board/sunxi/dram_cubietruck.c create mode 100644
board/sunxi/gmac.c create mode 100644 drivers/mmc/sunxi_mmc.c create
mode 100644 include/configs/sun7i.h create mode 100644
include/configs/sunxi-common.h create mode 100644
tools/atmel_pmecc_params.c create mode 100644 tools/atmelimage.c
create mode 100644 tools/mksunxiboot.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-05-24 9:32 Albert ARIBAUD
@ 2014-05-24 20:37 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-05-24 20:37 UTC (permalink / raw)
To: u-boot
On Sat, May 24, 2014 at 11:32:00AM +0200, Albert ARIBAUD wrote:
> Hello Tom (and sorry for the duplicate),
>
> The following changes since commit
> 10dc77716f41979e03baf3b847b97dc7279ef30d:
>
> esdhc/usdhc: Fix warning when CONFIG_SYS_FSL_ESDHC_USE_PIO is not set
> (2014-05-23 09:19:05 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 33144ea443c298ac9d6f04926a02881a5bae91a3:
>
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-05-24
> 09:50:00 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (3):
> Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>
> Ash Charles (9):
> omap: overo: allow the use of a plain text env file instead boot
> scripts OMAP3: overo: add command support for mtd and ubi
> OMAP3: overo: eliminate hard-coded partition offsets
> arm: omap3: Fix omap3_overo SPL boot hangup
> Add Board Revision for Wireless chip
> OMAP3: overo: add some Gumstix expansion boards
> Allow overo to boot with device tree
> omap3: overo: Use common configurations for Overo
> omap4: duovero: Add Gumstix DuoVero machine.
>
> Dmitry Lifshitz (3):
> cm-t54: add cm-t54 board support
> cm-t54: add EEPROM support and MAC address handling
> cm-t54: add environment partition runtime detection
>
> Heiko Schocher (1):
> arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards
>
> Igor Grinberg (1):
> compulab: eeprom: add default eeprom address
>
> Ilya Ledvich (1):
> compulab: eeprom: enable any i2c driver
>
> Keerthy (1):
> ARM: DRA72x: volt: Update the pmic offsets
>
> Lokesh Vutla (5):
> ARM: DRA72x: Add Silicon ID support
> ARM: DRA72x: clocks: Update the hwdata
> ARM: DRA72x: Update EMIF data
> ARM: DRA7xx: ctrl: Fix efuse register addresses
> ARM: OMAP: Fix omap_sdram_size calculation
>
> Masahiro Yamada (7):
> zynq: add empty xil_io.h to avoid compile error
> zynq: treat ps7_init.c/h as external files to ignore them
> build: support a new image u-boot-dtb.img
> zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined
> zynq: import zynq-7000.dtsi from Linux Kernel
> zynq: add memory nodes to device tree to initialize DRAM with OF
> zynq: add UART nodes to device tree to initialize UART with OF
>
> Michal Simek (12):
> ARM: zynq: Fix sparse warnings in slcr.c
> ARM: zynq: Fix sparse warning in ddrc.c
> ARM: zynq: Remove sparse warnings
> ARM: zynq: Do not use half memory size for ECC case
> ARM: zynq: Call zynq board_init() in SPL
> ARM: zynq: slcr: Fix incorrect commentary
> ARM: zynq: Setup correct slcr_lock value
> ARM: zynq: Fix building SPL without FPGA support
> ARM: zynq: Extend kernel image size to 60MB
> ARM: zynq: Add MIO detection code
> ARM: zynq: ehci: Added USB host driver support
> ARM: zynq: Extend maximum number of command arguments
>
> Mike Looijmans (1):
> ARM: zynq: Fix bootmode mask
>
> Nobuhiro Iwamatsu (20):
> arm: rmobile: Add define of SCIF register for R8A7790 and R8A7791
> arm: rmobile: koelsch: Remove define of SCIF register
> arm: rmobile: koelsch: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY
> arm: rmobile: koelsch: Enable optimization of thumb
> arm: rmobile: lager: Remove define of SCIF register
> arm: rmobile: lager: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY
> arm: rmobile: lager: Enable optimization of thumb
> gpio: r8a7791-gpio: Fix typo in macro
> gpio: r8a7790-gpio: Fix typo in macro
> arm: rmobile: koelsch: Add support USB controller
> arm: rmobile: koelsch: Add support command and filesystems of VFAT
> arm: rmobile: lager: Add support USB controller
> arm: rmobile: lager: Add support command and filesystems of VFAT
> arm: rmobile: lager: Add support ext4/fat write command
> arm: rmobile: koelsch: Add support ext4/fat write command
> arm: rmobile: r8a7791: Fix MOD_SEL3 function table about
> FN_SEL_IEB arm: rmobile: koelsch: Fix QoS revision 0.240 and 0.320
> arm: rmobile: armadillo800eva: Enable CONFIG_SYS_GENERIC_BOARD
> arm: rmobile: koelsch: Enable CONFIG_SYS_GENERIC_BOARD
> arm: rmobile: lager: Enable CONFIG_SYS_GENERIC_BOARD
>
> Peter A. Bigot (1):
> OMAP3: overo: increase linux partition to 8 MiB
>
> Sergey Alyoshin (1):
> am33xx: report silicon revision instead of code
>
> Siva Durga Prasad Paladugu (5):
> ARM: zynq: Added efuse status register base address
> ARM: zynq: Added USB host support for zynq boards
> ARM: zynq: Enable the FAT write capability
> ARM: zynq: Move USB/SD/MMC common FAT configs
> ARM: zynq: Enable EXT4 configs
>
> Tom Rini (1):
> armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate
> omap_hw_init_context
>
> pekon gupta (3):
> ARM: omap4: add platform specific info for GPMC and ELM
> controllers ARM: omap5: add platform specific info for GPMC and ELM
> controllers ARM: omap: merge GPMC initialization code for all platform
>
> Makefile | 8 ++++
> arch/arm/cpu/armv7/am33xx/Makefile | 1 -
> arch/arm/cpu/armv7/am33xx/mem.c | 98
> ---------------------------------------
> arch/arm/cpu/armv7/am33xx/sys_info.c | 41
> +++++++++------- arch/arm/cpu/armv7/omap-common/Makefile |
> 4 -- arch/arm/cpu/armv7/omap-common/emif-common.c | 6 ++-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 15 +++---
> arch/arm/cpu/armv7/omap-common/mem-common.c | 117
> +++++++++++++++++++++++++++++++++++++++++++---
> arch/arm/cpu/armv7/omap3/Makefile | 1 -
> arch/arm/cpu/armv7/omap5/hw_data.c | 40
> ++++++++++++++++ arch/arm/cpu/armv7/omap5/hwinit.c |
> 3 ++ arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 ++--
> arch/arm/cpu/armv7/omap5/sdram.c | 19 +++++++-
> arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 2 +-
> arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++++
> arch/arm/cpu/armv7/zynq/ddrc.c | 5 +-
> arch/arm/cpu/armv7/zynq/slcr.c | 87
> ++++++++++++++++++++++++++++++++--
> arch/arm/cpu/armv7/zynq/spl.c | 15 ++++++
> arch/arm/dts/zynq-7000.dtsi | 194
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/zynq-microzed.dts | 9 ++++
> arch/arm/dts/zynq-zc702.dts | 9 ++++
> arch/arm/dts/zynq-zc706.dts | 9 ++++
> arch/arm/dts/zynq-zc770-xm010.dts | 9 ++++
> arch/arm/dts/zynq-zc770-xm012.dts | 9 ++++
> arch/arm/dts/zynq-zc770-xm013.dts | 9 ++++
> arch/arm/dts/zynq-zed.dts | 9 ++++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap3/mem.h | 1 +
> arch/arm/include/asm/arch-omap4/cpu.h | 5 +-
> arch/arm/include/asm/arch-omap4/hardware.h | 26 +++++++++++
> arch/arm/include/asm/arch-omap4/mem.h | 62
> +++++++++++++++++++++++++
> arch/arm/include/asm/arch-omap4/omap.h | 3 --
> arch/arm/include/asm/arch-omap4/sys_proto.h | 51
> +------------------- arch/arm/include/asm/arch-omap5/cpu.h
> | 5 +- arch/arm/include/asm/arch-omap5/hardware.h | 26
> +++++++++++ arch/arm/include/asm/arch-omap5/mem.h | 62
> +++++++++++++++++++++++++
> arch/arm/include/asm/arch-omap5/omap.h | 9 +---
> arch/arm/include/asm/arch-omap5/sys_proto.h | 50
> +------------------- arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h
> | 6 +-- arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 6 +--
> arch/arm/include/asm/arch-rmobile/r8a7791.h | 1 +
> arch/arm/include/asm/arch-rmobile/rcar-base.h | 8 ++++
> arch/arm/include/asm/arch-zynq/hardware.h | 13 +++++-
> arch/arm/include/asm/arch-zynq/sys_proto.h | 2 +
> arch/arm/include/asm/omap_common.h | 7 +--
> arch/arm/include/asm/ti-common/sys_proto.h | 72
> ++++++++++++++++++++++++++++
> board/compulab/cm_t54/Makefile | 10 ++++
> board/compulab/cm_t54/cm_t54.c | 262
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/compulab/cm_t54/mux.c | 94
> +++++++++++++++++++++++++++++++++++++
> board/compulab/cm_t54/spl.c | 66
> ++++++++++++++++++++++++++
> board/compulab/common/Makefile | 2 +-
> board/compulab/common/eeprom.c | 5 ++
> board/compulab/common/eeprom.h | 2 +-
> board/gumstix/duovero/Makefile | 8 ++++
> board/gumstix/duovero/duovero.c | 264
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/gumstix/duovero/duovero_mux_data.h | 199
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/overo/overo.c | 43
> ++++++++++++++++- board/overo/overo.h |
> 17 +++++++ board/renesas/koelsch/qos.c | 1 +
> board/xilinx/zynq/.gitignore | 1 +
> board/xilinx/zynq/Makefile | 5 +-
> board/xilinx/zynq/board.c | 25 ++++++----
> board/xilinx/zynq/ps7_init.c | 12 -----
> board/xilinx/zynq/xil_io.h | 13 ++++++
> boards.cfg | 2 +
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-zynq.c | 104
> +++++++++++++++++++++++++++++++++++++++++
> include/configs/armadillo-800eva.h | 1 +
> include/configs/cm_t54.h | 149
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/duovero.h | 62
> +++++++++++++++++++++++++
> include/configs/koelsch.h | 23 +++++++--
> include/configs/lager.h | 22 +++++++--
> include/configs/omap3_overo.h | 296
> +++++++++++++++++++++++++++++++++++++-------------------------------------------------------------------------------
> include/configs/siemens-am33x-common.h | 2 +
> include/configs/ti_omap4_common.h | 9 ++++
> include/configs/zynq-common.h | 52
> ++++++++++++++++----- include/configs/zynq_zc70x.h
> | 1 + include/configs/zynq_zed.h | 1 + 78
> files changed, 2383 insertions(+), 527 deletions(-) delete mode 100644
> arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
> arch/arm/include/asm/arch-omap4/hardware.h create mode 100644
> arch/arm/include/asm/arch-omap4/mem.h create mode 100644
> arch/arm/include/asm/arch-omap5/hardware.h create mode 100644
> arch/arm/include/asm/arch-omap5/mem.h create mode 100644
> arch/arm/include/asm/ti-common/sys_proto.h create mode 100644
> board/compulab/cm_t54/Makefile create mode 100644
> board/compulab/cm_t54/cm_t54.c create mode 100644
> board/compulab/cm_t54/mux.c create mode 100644
> board/compulab/cm_t54/spl.c create mode 100644
> board/gumstix/duovero/Makefile create mode 100644
> board/gumstix/duovero/duovero.c create mode 100644
> board/gumstix/duovero/duovero_mux_data.h create mode 100644
> board/xilinx/zynq/.gitignore delete mode 100644
> board/xilinx/zynq/ps7_init.c create mode 100644
> board/xilinx/zynq/xil_io.h create mode 100644
> drivers/usb/host/ehci-zynq.c create mode 100644
> include/configs/cm_t54.h create mode 100644 include/configs/duovero.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140524/8b1fb2ae/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-05-24 9:32 UTC (permalink / raw)
To: u-boot
Hello Tom (and sorry for the duplicate),
The following changes since commit
10dc77716f41979e03baf3b847b97dc7279ef30d:
esdhc/usdhc: Fix warning when CONFIG_SYS_FSL_ESDHC_USE_PIO is not set
(2014-05-23 09:19:05 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 33144ea443c298ac9d6f04926a02881a5bae91a3:
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2014-05-24
09:50:00 +0200)
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Ash Charles (9):
omap: overo: allow the use of a plain text env file instead boot
scripts OMAP3: overo: add command support for mtd and ubi
OMAP3: overo: eliminate hard-coded partition offsets
arm: omap3: Fix omap3_overo SPL boot hangup
Add Board Revision for Wireless chip
OMAP3: overo: add some Gumstix expansion boards
Allow overo to boot with device tree
omap3: overo: Use common configurations for Overo
omap4: duovero: Add Gumstix DuoVero machine.
Dmitry Lifshitz (3):
cm-t54: add cm-t54 board support
cm-t54: add EEPROM support and MAC address handling
cm-t54: add environment partition runtime detection
Heiko Schocher (1):
arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boards
Igor Grinberg (1):
compulab: eeprom: add default eeprom address
Ilya Ledvich (1):
compulab: eeprom: enable any i2c driver
Keerthy (1):
ARM: DRA72x: volt: Update the pmic offsets
Lokesh Vutla (5):
ARM: DRA72x: Add Silicon ID support
ARM: DRA72x: clocks: Update the hwdata
ARM: DRA72x: Update EMIF data
ARM: DRA7xx: ctrl: Fix efuse register addresses
ARM: OMAP: Fix omap_sdram_size calculation
Masahiro Yamada (7):
zynq: add empty xil_io.h to avoid compile error
zynq: treat ps7_init.c/h as external files to ignore them
build: support a new image u-boot-dtb.img
zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined
zynq: import zynq-7000.dtsi from Linux Kernel
zynq: add memory nodes to device tree to initialize DRAM with OF
zynq: add UART nodes to device tree to initialize UART with OF
Michal Simek (12):
ARM: zynq: Fix sparse warnings in slcr.c
ARM: zynq: Fix sparse warning in ddrc.c
ARM: zynq: Remove sparse warnings
ARM: zynq: Do not use half memory size for ECC case
ARM: zynq: Call zynq board_init() in SPL
ARM: zynq: slcr: Fix incorrect commentary
ARM: zynq: Setup correct slcr_lock value
ARM: zynq: Fix building SPL without FPGA support
ARM: zynq: Extend kernel image size to 60MB
ARM: zynq: Add MIO detection code
ARM: zynq: ehci: Added USB host driver support
ARM: zynq: Extend maximum number of command arguments
Mike Looijmans (1):
ARM: zynq: Fix bootmode mask
Nobuhiro Iwamatsu (20):
arm: rmobile: Add define of SCIF register for R8A7790 and R8A7791
arm: rmobile: koelsch: Remove define of SCIF register
arm: rmobile: koelsch: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY
arm: rmobile: koelsch: Enable optimization of thumb
arm: rmobile: lager: Remove define of SCIF register
arm: rmobile: lager: Remove CONFIG_USE_ARCH_MEMSET and MEMCPY
arm: rmobile: lager: Enable optimization of thumb
gpio: r8a7791-gpio: Fix typo in macro
gpio: r8a7790-gpio: Fix typo in macro
arm: rmobile: koelsch: Add support USB controller
arm: rmobile: koelsch: Add support command and filesystems of VFAT
arm: rmobile: lager: Add support USB controller
arm: rmobile: lager: Add support command and filesystems of VFAT
arm: rmobile: lager: Add support ext4/fat write command
arm: rmobile: koelsch: Add support ext4/fat write command
arm: rmobile: r8a7791: Fix MOD_SEL3 function table about
FN_SEL_IEB arm: rmobile: koelsch: Fix QoS revision 0.240 and 0.320
arm: rmobile: armadillo800eva: Enable CONFIG_SYS_GENERIC_BOARD
arm: rmobile: koelsch: Enable CONFIG_SYS_GENERIC_BOARD
arm: rmobile: lager: Enable CONFIG_SYS_GENERIC_BOARD
Peter A. Bigot (1):
OMAP3: overo: increase linux partition to 8 MiB
Sergey Alyoshin (1):
am33xx: report silicon revision instead of code
Siva Durga Prasad Paladugu (5):
ARM: zynq: Added efuse status register base address
ARM: zynq: Added USB host support for zynq boards
ARM: zynq: Enable the FAT write capability
ARM: zynq: Move USB/SD/MMC common FAT configs
ARM: zynq: Enable EXT4 configs
Tom Rini (1):
armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate
omap_hw_init_context
pekon gupta (3):
ARM: omap4: add platform specific info for GPMC and ELM
controllers ARM: omap5: add platform specific info for GPMC and ELM
controllers ARM: omap: merge GPMC initialization code for all platform
Makefile | 8 ++++
arch/arm/cpu/armv7/am33xx/Makefile | 1 -
arch/arm/cpu/armv7/am33xx/mem.c | 98
---------------------------------------
arch/arm/cpu/armv7/am33xx/sys_info.c | 41
+++++++++------- arch/arm/cpu/armv7/omap-common/Makefile |
4 -- arch/arm/cpu/armv7/omap-common/emif-common.c | 6 ++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 15 +++---
arch/arm/cpu/armv7/omap-common/mem-common.c | 117
+++++++++++++++++++++++++++++++++++++++++++---
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap5/hw_data.c | 40
++++++++++++++++ arch/arm/cpu/armv7/omap5/hwinit.c |
3 ++ arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 ++--
arch/arm/cpu/armv7/omap5/sdram.c | 19 +++++++-
arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 2 +-
arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++++
arch/arm/cpu/armv7/zynq/ddrc.c | 5 +-
arch/arm/cpu/armv7/zynq/slcr.c | 87
++++++++++++++++++++++++++++++++--
arch/arm/cpu/armv7/zynq/spl.c | 15 ++++++
arch/arm/dts/zynq-7000.dtsi | 194
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/zynq-microzed.dts | 9 ++++
arch/arm/dts/zynq-zc702.dts | 9 ++++
arch/arm/dts/zynq-zc706.dts | 9 ++++
arch/arm/dts/zynq-zc770-xm010.dts | 9 ++++
arch/arm/dts/zynq-zc770-xm012.dts | 9 ++++
arch/arm/dts/zynq-zc770-xm013.dts | 9 ++++
arch/arm/dts/zynq-zed.dts | 9 ++++
arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap3/mem.h | 1 +
arch/arm/include/asm/arch-omap4/cpu.h | 5 +-
arch/arm/include/asm/arch-omap4/hardware.h | 26 +++++++++++
arch/arm/include/asm/arch-omap4/mem.h | 62
+++++++++++++++++++++++++
arch/arm/include/asm/arch-omap4/omap.h | 3 --
arch/arm/include/asm/arch-omap4/sys_proto.h | 51
+------------------- arch/arm/include/asm/arch-omap5/cpu.h
| 5 +- arch/arm/include/asm/arch-omap5/hardware.h | 26
+++++++++++ arch/arm/include/asm/arch-omap5/mem.h | 62
+++++++++++++++++++++++++
arch/arm/include/asm/arch-omap5/omap.h | 9 +---
arch/arm/include/asm/arch-omap5/sys_proto.h | 50
+------------------- arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h
| 6 +-- arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 6 +--
arch/arm/include/asm/arch-rmobile/r8a7791.h | 1 +
arch/arm/include/asm/arch-rmobile/rcar-base.h | 8 ++++
arch/arm/include/asm/arch-zynq/hardware.h | 13 +++++-
arch/arm/include/asm/arch-zynq/sys_proto.h | 2 +
arch/arm/include/asm/omap_common.h | 7 +--
arch/arm/include/asm/ti-common/sys_proto.h | 72
++++++++++++++++++++++++++++
board/compulab/cm_t54/Makefile | 10 ++++
board/compulab/cm_t54/cm_t54.c | 262
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/compulab/cm_t54/mux.c | 94
+++++++++++++++++++++++++++++++++++++
board/compulab/cm_t54/spl.c | 66
++++++++++++++++++++++++++
board/compulab/common/Makefile | 2 +-
board/compulab/common/eeprom.c | 5 ++
board/compulab/common/eeprom.h | 2 +-
board/gumstix/duovero/Makefile | 8 ++++
board/gumstix/duovero/duovero.c | 264
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/gumstix/duovero/duovero_mux_data.h | 199
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/overo/overo.c | 43
++++++++++++++++- board/overo/overo.h |
17 +++++++ board/renesas/koelsch/qos.c | 1 +
board/xilinx/zynq/.gitignore | 1 +
board/xilinx/zynq/Makefile | 5 +-
board/xilinx/zynq/board.c | 25 ++++++----
board/xilinx/zynq/ps7_init.c | 12 -----
board/xilinx/zynq/xil_io.h | 13 ++++++
boards.cfg | 2 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-zynq.c | 104
+++++++++++++++++++++++++++++++++++++++++
include/configs/armadillo-800eva.h | 1 +
include/configs/cm_t54.h | 149
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/duovero.h | 62
+++++++++++++++++++++++++
include/configs/koelsch.h | 23 +++++++--
include/configs/lager.h | 22 +++++++--
include/configs/omap3_overo.h | 296
+++++++++++++++++++++++++++++++++++++-------------------------------------------------------------------------------
include/configs/siemens-am33x-common.h | 2 +
include/configs/ti_omap4_common.h | 9 ++++
include/configs/zynq-common.h | 52
++++++++++++++++----- include/configs/zynq_zc70x.h
| 1 + include/configs/zynq_zed.h | 1 + 78
files changed, 2383 insertions(+), 527 deletions(-) delete mode 100644
arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
arch/arm/include/asm/arch-omap4/hardware.h create mode 100644
arch/arm/include/asm/arch-omap4/mem.h create mode 100644
arch/arm/include/asm/arch-omap5/hardware.h create mode 100644
arch/arm/include/asm/arch-omap5/mem.h create mode 100644
arch/arm/include/asm/ti-common/sys_proto.h create mode 100644
board/compulab/cm_t54/Makefile create mode 100644
board/compulab/cm_t54/cm_t54.c create mode 100644
board/compulab/cm_t54/mux.c create mode 100644
board/compulab/cm_t54/spl.c create mode 100644
board/gumstix/duovero/Makefile create mode 100644
board/gumstix/duovero/duovero.c create mode 100644
board/gumstix/duovero/duovero_mux_data.h create mode 100644
board/xilinx/zynq/.gitignore delete mode 100644
board/xilinx/zynq/ps7_init.c create mode 100644
board/xilinx/zynq/xil_io.h create mode 100644
drivers/usb/host/ehci-zynq.c create mode 100644
include/configs/cm_t54.h create mode 100644 include/configs/duovero.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-05-20 8:57 Albert ARIBAUD
@ 2014-05-22 19:12 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-05-22 19:12 UTC (permalink / raw)
To: u-boot
On Tue, May 20, 2014 at 10:57:08AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> d7782d06534fe4fa47a49fa7c106de5ba85a9687:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
> 18:30:33 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
>
> Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
> +0200)
>
> Note: there still is a Zynq PR pending right now, but I wanted
> to get re-synchronized with mainline first; a further PR with Zynq
> and individual patches will arrive soon.
>
> ----------------------------------------------------------------
>
> Akshay Saraswat (3):
> Exynos5: config: Enable FIT
> S5P: Exynos: Add GPIO pin numbering and rename definitions
> S5P: Exynos: Config: Enable GPIO CMD config
>
> Albert ARIBAUD (12):
> arm1136: move cache code from start.S to cache.c
> arm: move reset_cpu from start.S into cpu.c
> arm: pxa: move SP check from start.S to cpuinfo.c
> arm: remove unused _end_vect and _vectors_end symbols
> arm: move exception handling out of start.S files
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge remote-tracking branch 'u-boot-sh/rmobile'
> boards.cfg: reformat
> Merge remote-tracking branch 'u-boot/master'
>
> Ash Charles (1):
> am335x: pepper: Add Gumstix Pepper AM335x-based machine
>
> Belisko Marek (1):
> mtd: nand: omap_gpmc: Fix update of read_ecc in oob
>
> Christian Riesch (1):
> arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
> image
>
> Dmitry Lifshitz (3):
> ARM: OMAP5: add UART4 support
> ARM: OMAP5: Power: add LDO2 support for Palmas driver
> ARM: OMAP5: add CKO buffer control mask
>
> Egli, Samuel (7):
> siemens: cosmetic: remove unused and rename defines
> siemens: update DDR3 parameters for dxr2
> siemens: add led cmd for flexible LED control
> siemens: change LED indication in DFU mode
> siemens: cosmetic: rename project_dir
> siemens:cosmetic, dxr2: rename dxr2 to draco
> siemens, draco: add new target
>
> Eric Benard (8):
> imx-common: add board_video_skip
> nitrogen6x: use common board_video_skip
> mx6sabresd: use common board_video_skip
> RiOTboard and MarSBoard: add new boards support
> imx-common/video: add detect_hdmi
> nitrogen6x: use common detect_hdmi
> mx6sabresd: use common detect_hdmi
> embest/mx6boards: use common detect_hdmi
>
> Eric Nelson (1):
> ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
>
> Fabio Estevam (11):
> wandboard: Convert to generic board
> mx53loco: Convert to generic board
> mx6sabre_common: Convert to generic board
> mx53ard: Convert to generic board
> mx53smd: Convert to generic board
> mx53evk: Convert to generic board
> udoo: Convert to generic board
> hummingboard: Convert to generic board
> mx6slevk: Add SPI NOR flash support
> nitrogen6x: Fix the PAD settings for the ECSPI chipselect
> iomux-v3: Add support for mx6sl LVE bit
>
> Inha Song (1):
> samsung: misc: add env default option to lcd menu
>
> Jaehoon Chung (1):
> ARM: exynos: remove the unused code
>
> Khoronzhuk, Ivan (1):
> config: k2hk_evm: Add generic board support
>
> Marek Vasut (1):
> arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
>
> Mateusz Zalega (1):
> ARM: Samsung: s5p_goni: maintainer update
>
> Nobuhiro Iwamatsu (22):
> arm: rmobile: Coordinate the common part of the header file of
> r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
> latency setting arm: rmobile: koelsch: Change name of structure
> arm: rmobile: koelsch: Remove NOR-Flash support
> arm: rmobile: lager: Change name of the structure
> arm: rmobile: lager: Remove NOR-Flash support
> arm: rmobile: Merge functions to get the CPU information of
> R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
> rmobile_get_cpu_rev_integer() arm: rmobile: Add
> rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
> prototype for function to get the CPU information to rmobile.h arm:
> rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
> support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
> arm: rmobile: keolsch: Add support ES2 revision of R8A7791
> arm: rmobile: lager: Update QoS initialization to version 0.955
> arm: rmobile: koelsch: Update QoS initialization
> arm: rmobile: koelsch: Update calculation of
> CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
> regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
> arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
> arm: rmobile: lager: Change to maximum CPU frequency
> arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
>
> Otavio Salvador (2):
> wandboard: add Future Eletronics 7" WVGA LCD extension board
> wandboard: Pass video kernel arguments for HDMI and LCD
>
> Przemyslaw Marczak (4):
> samsung: misc: allows using environmental macros as args in menu
> commands samsung: misc: add gpt restore option to lcd menu
> samsung: misc: menu: increase delay in menu main loop
> samsung: misc: remove download mode info screen
>
> Robert Nelson (2):
> omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
> omap3_beagle: xM A/B validate new dtb exits in file system
>
> Stefano Babic (3):
> mx6: fix weird formatting in imx6q-sabreauto.dts
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> Stephen Warren (10):
> ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
> ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
> ARM: tegra: allow pinmux mux option not to be set by init tables
> ARM: tegra: add GPIO initialization table function
> ARM: tegra: add function to enable input clamping on tristate
> ARM: tegra: make use of GPIO init table on Jetson TK1
> ARM: tegra: clamp inputs on Jetson TK1
> ARM: tegra: update Venice2 pinmux
> ARM: tegra: Venice2 pinmux spreadsheet updates
> ARM: tegra: use a CPU freq that all SKUs can support
>
> Thomas Diener (2):
> imx25: Add new hardware registers
> video: Add support for imx25 lcd controller
>
> Tim Harvey (10):
> ventana: fixed comments in eeprom header
> ventana: remove redundant include
> power: make pfuze100 be able to coexist with other pmics
> ventana: use non-generic pfuze100 init
> power: Add support for LTC3676 PMIC
> ventana: Add support for the LTC3676 PMIC
> imx6: ventana: fix system-serial dt property
> imx: ventana: Convert to generic board
> imx: ventana: add HDMI and LVDS display capability
> nand: remove CONFIG_SYS_NAND_PAGE_SIZE
>
> Yegor Yefremov (1):
> am33xx: add SSC enable macro
>
> ?ukasz Majewski (2):
> trats2: config: fix: Set default console to ttySAC2
> trats: config: fix: Set default console to ttySAC2
>
> Makefile
> | 2 +-
> arch/arm/cpu/arm1136/start.S |
> 254 +-------------
> arch/arm/cpu/arm1176/start.S |
> 198 +----------
> arch/arm/cpu/arm720t/start.S |
> 229 +------------
> arch/arm/cpu/arm720t/tegra-common/cpu.c |
> 10 +-
> arch/arm/cpu/arm720t/tegra30/cpu.c |
> 23 +-
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds
> | 3 +-
> arch/arm/cpu/arm920t/start.S |
> 216 +-----------
> arch/arm/cpu/arm926ejs/mxs/start.S |
> 92 +-----
> arch/arm/cpu/arm926ejs/spear/start.S |
> 27 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> | 1 +
> arch/arm/cpu/arm926ejs/start.S |
> 262 +--------------
> arch/arm/cpu/arm946es/cpu.c |
> 13 +
> arch/arm/cpu/arm946es/start.S |
> 246 +-------------
> arch/arm/cpu/arm_intcm/start.S |
> 228 +------------
> arch/arm/cpu/armv7/exynos/pinmux.c |
> 561 +++++++++++++++++--------------
> arch/arm/cpu/armv7/rmobile/Makefile
> | 4 +-
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
> 29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
> cpu_info-rcar.c} | 12 +-
> arch/arm/cpu/armv7/rmobile/cpu_info.c |
> 49 ++-
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
> 20 +-
> arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
> 15 +-
> arch/arm/cpu/armv7/start.S |
> 253 +-------------
> arch/arm/cpu/armv7/zynq/u-boot.lds
> | 2 +-
> arch/arm/cpu/pxa/cpuinfo.c
> | 6 +
> arch/arm/cpu/pxa/start.S |
> 253 +-------------
> arch/arm/cpu/sa1100/cpu.c |
> 14 +
> arch/arm/cpu/sa1100/start.S |
> 225 +------------
> arch/arm/cpu/tegra-common/pinmux-common.c |
> 19 ++
> arch/arm/cpu/u-boot-spl.lds
> | 1 +
> arch/arm/cpu/u-boot.lds
> | 1 +
> arch/arm/dts/exynos4210-origen.dts
> | 4 +-
> arch/arm/dts/exynos4210-trats.dts
> | 6 +-
> arch/arm/dts/exynos4210-universal_c210.dts
> | 4 +-
> arch/arm/dts/exynos4412-trats2.dts
> | 4 +-
> arch/arm/dts/imx6q-sabreauto.dts |
> 10 +-
> arch/arm/imx-common/Makefile
> | 1 +
> arch/arm/imx-common/iomux-v3.c
> | 8 +
> arch/arm/imx-common/video.c |
> 65 ++++
> arch/arm/include/asm/arch-am33xx/clock.h
> | 2 +
> arch/arm/include/asm/arch-exynos/cpu.h |
> 17 +-
> arch/arm/include/asm/arch-exynos/gpio.h |
> 1761
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
> arch/arm/include/asm/arch-mx25/imx-regs.h |
> 175 ++++++++++
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> | 4 +
> arch/arm/include/asm/arch-omap5/clock.h
> | 3 +
> arch/arm/include/asm/arch-omap5/omap.h
> | 1 +
> arch/arm/include/asm/arch-rmobile/r8a7790.h |
> 609 +---------------------------------
> arch/arm/include/asm/arch-rmobile/r8a7791.h |
> 626 +----------------------------------
> arch/arm/include/asm/arch-rmobile/rcar-base.h |
> 637 +++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-rmobile/rmobile.h
> | 6 +
> arch/arm/include/asm/arch-s5pc1xx/gpio.h |
> 948 ++++++++++++++++++++++++++++++++++++++++++++--------
> arch/arm/include/asm/arch-tegra/gpio.h |
> 20 ++
> arch/arm/include/asm/arch-tegra/pinmux.h
> | 5 +
> arch/arm/include/asm/arch-tegra/tegra_mmc.h
> | 2 -
> arch/arm/include/asm/arch-tegra114/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra124/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra20/pinmux.h
> | 1 +
> arch/arm/include/asm/arch-tegra30/pinmux.h
> | 1 +
> arch/arm/include/asm/imx-common/iomux-v3.h
> | 5 +
> arch/arm/include/asm/imx-common/video.h |
> 24 ++
> arch/arm/lib/Makefile
> | 2 +-
> arch/arm/lib/cache.c |
> 13 +-
> arch/arm/lib/vectors.S |
> 291 ++++++++++++++++
> board/boundary/nitrogen6x/nitrogen6x.c |
> 69 +---
> board/compulab/cm_t335/u-boot.lds
> | 1 +
> board/embest/mx6boards/Makefile
> | 9 +
> board/embest/mx6boards/mx6boards.c |
> 601 +++++++++++++++++++++++++++++++++
> board/freescale/mx31ads/u-boot.lds
> | 1 +
> board/freescale/mx6sabresd/mx6sabresd.c |
> 67 +---
> board/freescale/mx6slevk/mx6slevk.c |
> 20 ++
> board/gateworks/gw_ventana/gw_ventana.c |
> 215 ++++++++++--
> board/gateworks/gw_ventana/ventana_eeprom.h |
> 14 +-
> board/gumstix/pepper/Makefile |
> 13 +
> board/gumstix/pepper/board.c |
> 226 +++++++++++++
> board/gumstix/pepper/board.h |
> 19 ++
> board/gumstix/pepper/mux.c |
> 78 +++++
> board/nvidia/jetson-tk1/jetson-tk1.c
> | 6 +
> board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
> 256 +++++++++-----
> board/nvidia/venice2/pinmux-config-venice2.h |
> 567 +++++++++++++++----------------
> board/nvidia/venice2/venice2.c |
> 19 +-
> board/renesas/koelsch/koelsch.c |
> 194 +----------
> board/renesas/koelsch/qos.c |
> 404 ++++++++++++++---------
> board/renesas/lager/lager.c |
> 196 +----------
> board/renesas/lager/qos.c |
> 236 ++++++-------
> board/samsung/arndale/arndale.c |
> 11 +-
> board/samsung/common/misc.c |
> 130 ++++----
> board/samsung/goni/goni.c |
> 32 +-
> board/samsung/smdk5250/exynos5-dt.c |
> 20 +-
> board/samsung/smdk5250/smdk5250.c |
> 19 +-
> board/samsung/smdk5420/smdk5420.c |
> 15 +-
> board/samsung/smdkc100/smdkc100.c
> | 5 +-
> board/samsung/smdkv310/smdkv310.c |
> 19 +-
> board/samsung/trats/trats.c |
> 39 +--
> board/samsung/trats2/trats2.c |
> 74 ++---
> board/samsung/universal_c210/universal.c |
> 51 ++-
> board/siemens/common/board.c |
> 46 ++- board/siemens/{dxr2 =>
> draco}/Makefile | 0 board/siemens/{dxr2
> => draco}/board.c | 112 ++++---
> board/siemens/{dxr2 => draco}/board.h |
> 26 +- board/siemens/{dxr2 =>
> draco}/mux.c | 2 +-
> board/siemens/pxm2/board.c |
> 10 +-
> board/siemens/rut/board.c
> | 2 +-
> board/ti/am335x/u-boot.lds
> | 1 +
> board/wandboard/wandboard.c |
> 146 ++++++--
> boards.cfg
> | 9 +-
> common/spl/spl_nand.c
> | 2 +-
> drivers/gpio/s5p_gpio.c |
> 204 ++++++++++--
> drivers/gpio/tegra_gpio.c |
> 20 ++
> drivers/mmc/tegra_mmc.c |
> 13 +-
> drivers/mtd/nand/omap_gpmc.c
> | 2 +-
> drivers/power/pmic/Makefile
> | 1 +
> drivers/power/pmic/pmic_ltc3676.c |
> 32 ++
> drivers/power/pmic/pmic_pfuze100.c
> | 2 +-
> drivers/video/Makefile
> | 1 +
> drivers/video/imx25lcdc.c |
> 121 +++++++
> include/configs/beaver.h
> | 3 +
> include/configs/cardhu.h
> | 3 +
> include/configs/da850evm.h
> | 1 +
> include/configs/draco.h |
> 92 ++++++
> include/configs/dxr2.h
> | 4 +-
> include/configs/embestmx6boards.h |
> 336 +++++++++++++++++++
> include/configs/exynos5-dt.h
> | 2 +
> include/configs/gw_ventana.h |
> 20 ++
> include/configs/hummingboard.h
> | 2 +
> include/configs/k2hk_evm.h
> | 1 +
> include/configs/koelsch.h |
> 36 +-
> include/configs/lager.h |
> 40 +--
> include/configs/m28evk.h
> | 1 -
> include/configs/mx53ard.h
> | 2 +
> include/configs/mx53evk.h
> | 2 +
> include/configs/mx53loco.h
> | 2 +
> include/configs/mx53smd.h
> | 2 +
> include/configs/mx6sabre_common.h
> | 2 +
> include/configs/mx6sabresd.h
> | 1 +
> include/configs/mx6slevk.h |
> 12 +
> include/configs/mxs.h
> | 1 +
> include/configs/nitrogen6x.h
> | 2 +
> include/configs/omap3_beagle.h |
> 10 +-
> include/configs/pepper.h |
> 99 ++++++
> include/configs/pxm2.h
> | 2 +-
> include/configs/s5p_goni.h
> | 4 +-
> include/configs/s5pc210_universal.h |
> 23 +-
> include/configs/siemens-am33x-common.h
> | 8 +-
> include/configs/smdk5250.h
> | 4 +
> include/configs/smdk5420.h
> | 4 +
> include/configs/smdkv310.h
> | 1 +
> include/configs/snow.h
> | 4 +
> include/configs/tegra-common.h
> | 7 +
> include/configs/trats.h |
> 17 +-
> include/configs/trats2.h |
> 17 +-
> include/configs/udoo.h
> | 2 +
> include/configs/wandboard.h |
> 38 ++-
> include/palmas.h
> | 4 +
> include/power/ltc3676_pmic.h |
> 51 +++
> include/power/pfuze100_pmic.h
> | 1 +
> include/samsung/misc.h
> | 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
> delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
> rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
> cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
> create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
> create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
> 100644 arch/arm/lib/vectors.S create mode 100644
> board/embest/mx6boards/Makefile create mode 100644
> board/embest/mx6boards/mx6boards.c create mode 100644
> board/gumstix/pepper/Makefile create mode 100644
> board/gumstix/pepper/board.c create mode 100644
> board/gumstix/pepper/board.h create mode 100644
> board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
> draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
> (63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
> board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
> drivers/power/pmic/pmic_ltc3676.c create mode 100644
> drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
> create mode 100644 include/configs/embestmx6boards.h create mode
> 100644 include/configs/pepper.h create mode 100644
> include/power/ltc3676_pmic.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140522/e7d4cfdc/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-05-20 8:57 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:
Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42
+0200)
Note: there still is a Zynq PR pending right now, but I wanted
to get re-synchronized with mainline first; a further PR with Zynq
and individual patches will arrive soon.
----------------------------------------------------------------
Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config
Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-sh/rmobile'
boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'
Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine
Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob
Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image
Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask
Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir
siemens:cosmetic, dxr2: rename dxr2 to draco
siemens, draco: add new target
Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip
RiOTboard and MarSBoard: add new boards support
imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi
embest/mx6boards: use common detect_hdmi
Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD
Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit
Inha Song (1):
samsung: misc: add env default option to lcd menu
Jaehoon Chung (1):
ARM: exynos: remove the unused code
Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support
Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD
Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update
Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and
latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in
rmobile_get_cpu_rev_integer() arm: rmobile: Add
rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add
prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add
support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL
regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE
Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD
Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen
Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system
Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support
Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller
Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE
Yegor Yefremov (1):
am33xx: add SSC enable macro
?ukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2
Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++--------------
arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} | 12 +-
arch/arm/cpu/armv7/rmobile/cpu_info.c |
49 ++-
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S |
20 +-
arch/arm/cpu/armv7/socfpga/lowlevel_init.S |
15 +-
arch/arm/cpu/armv7/start.S |
253 +-------------
arch/arm/cpu/armv7/zynq/u-boot.lds
| 2 +-
arch/arm/cpu/pxa/cpuinfo.c
| 6 +
arch/arm/cpu/pxa/start.S |
253 +-------------
arch/arm/cpu/sa1100/cpu.c |
14 +
arch/arm/cpu/sa1100/start.S |
225 +------------
arch/arm/cpu/tegra-common/pinmux-common.c |
19 ++
arch/arm/cpu/u-boot-spl.lds
| 1 +
arch/arm/cpu/u-boot.lds
| 1 +
arch/arm/dts/exynos4210-origen.dts
| 4 +-
arch/arm/dts/exynos4210-trats.dts
| 6 +-
arch/arm/dts/exynos4210-universal_c210.dts
| 4 +-
arch/arm/dts/exynos4412-trats2.dts
| 4 +-
arch/arm/dts/imx6q-sabreauto.dts |
10 +-
arch/arm/imx-common/Makefile
| 1 +
arch/arm/imx-common/iomux-v3.c
| 8 +
arch/arm/imx-common/video.c |
65 ++++
arch/arm/include/asm/arch-am33xx/clock.h
| 2 +
arch/arm/include/asm/arch-exynos/cpu.h |
17 +-
arch/arm/include/asm/arch-exynos/gpio.h |
1761
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
arch/arm/include/asm/arch-mx25/imx-regs.h |
175 ++++++++++
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
| 4 +
arch/arm/include/asm/arch-omap5/clock.h
| 3 +
arch/arm/include/asm/arch-omap5/omap.h
| 1 +
arch/arm/include/asm/arch-rmobile/r8a7790.h |
609 +---------------------------------
arch/arm/include/asm/arch-rmobile/r8a7791.h |
626 +----------------------------------
arch/arm/include/asm/arch-rmobile/rcar-base.h |
637 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-rmobile/rmobile.h
| 6 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
948 ++++++++++++++++++++++++++++++++++++++++++++--------
arch/arm/include/asm/arch-tegra/gpio.h |
20 ++
arch/arm/include/asm/arch-tegra/pinmux.h
| 5 +
arch/arm/include/asm/arch-tegra/tegra_mmc.h
| 2 -
arch/arm/include/asm/arch-tegra114/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra124/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra20/pinmux.h
| 1 +
arch/arm/include/asm/arch-tegra30/pinmux.h
| 1 +
arch/arm/include/asm/imx-common/iomux-v3.h
| 5 +
arch/arm/include/asm/imx-common/video.h |
24 ++
arch/arm/lib/Makefile
| 2 +-
arch/arm/lib/cache.c |
13 +-
arch/arm/lib/vectors.S |
291 ++++++++++++++++
board/boundary/nitrogen6x/nitrogen6x.c |
69 +---
board/compulab/cm_t335/u-boot.lds
| 1 +
board/embest/mx6boards/Makefile
| 9 +
board/embest/mx6boards/mx6boards.c |
601 +++++++++++++++++++++++++++++++++
board/freescale/mx31ads/u-boot.lds
| 1 +
board/freescale/mx6sabresd/mx6sabresd.c |
67 +---
board/freescale/mx6slevk/mx6slevk.c |
20 ++
board/gateworks/gw_ventana/gw_ventana.c |
215 ++++++++++--
board/gateworks/gw_ventana/ventana_eeprom.h |
14 +-
board/gumstix/pepper/Makefile |
13 +
board/gumstix/pepper/board.c |
226 +++++++++++++
board/gumstix/pepper/board.h |
19 ++
board/gumstix/pepper/mux.c |
78 +++++
board/nvidia/jetson-tk1/jetson-tk1.c
| 6 +
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h |
256 +++++++++-----
board/nvidia/venice2/pinmux-config-venice2.h |
567 +++++++++++++++----------------
board/nvidia/venice2/venice2.c |
19 +-
board/renesas/koelsch/koelsch.c |
194 +----------
board/renesas/koelsch/qos.c |
404 ++++++++++++++---------
board/renesas/lager/lager.c |
196 +----------
board/renesas/lager/qos.c |
236 ++++++-------
board/samsung/arndale/arndale.c |
11 +-
board/samsung/common/misc.c |
130 ++++----
board/samsung/goni/goni.c |
32 +-
board/samsung/smdk5250/exynos5-dt.c |
20 +-
board/samsung/smdk5250/smdk5250.c |
19 +-
board/samsung/smdk5420/smdk5420.c |
15 +-
board/samsung/smdkc100/smdkc100.c
| 5 +-
board/samsung/smdkv310/smdkv310.c |
19 +-
board/samsung/trats/trats.c |
39 +--
board/samsung/trats2/trats2.c |
74 ++---
board/samsung/universal_c210/universal.c |
51 ++-
board/siemens/common/board.c |
46 ++- board/siemens/{dxr2 =>
draco}/Makefile | 0 board/siemens/{dxr2
=> draco}/board.c | 112 ++++---
board/siemens/{dxr2 => draco}/board.h |
26 +- board/siemens/{dxr2 =>
draco}/mux.c | 2 +-
board/siemens/pxm2/board.c |
10 +-
board/siemens/rut/board.c
| 2 +-
board/ti/am335x/u-boot.lds
| 1 +
board/wandboard/wandboard.c |
146 ++++++--
boards.cfg
| 9 +-
common/spl/spl_nand.c
| 2 +-
drivers/gpio/s5p_gpio.c |
204 ++++++++++--
drivers/gpio/tegra_gpio.c |
20 ++
drivers/mmc/tegra_mmc.c |
13 +-
drivers/mtd/nand/omap_gpmc.c
| 2 +-
drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_ltc3676.c |
32 ++
drivers/power/pmic/pmic_pfuze100.c
| 2 +-
drivers/video/Makefile
| 1 +
drivers/video/imx25lcdc.c |
121 +++++++
include/configs/beaver.h
| 3 +
include/configs/cardhu.h
| 3 +
include/configs/da850evm.h
| 1 +
include/configs/draco.h |
92 ++++++
include/configs/dxr2.h
| 4 +-
include/configs/embestmx6boards.h |
336 +++++++++++++++++++
include/configs/exynos5-dt.h
| 2 +
include/configs/gw_ventana.h |
20 ++
include/configs/hummingboard.h
| 2 +
include/configs/k2hk_evm.h
| 1 +
include/configs/koelsch.h |
36 +-
include/configs/lager.h |
40 +--
include/configs/m28evk.h
| 1 -
include/configs/mx53ard.h
| 2 +
include/configs/mx53evk.h
| 2 +
include/configs/mx53loco.h
| 2 +
include/configs/mx53smd.h
| 2 +
include/configs/mx6sabre_common.h
| 2 +
include/configs/mx6sabresd.h
| 1 +
include/configs/mx6slevk.h |
12 +
include/configs/mxs.h
| 1 +
include/configs/nitrogen6x.h
| 2 +
include/configs/omap3_beagle.h |
10 +-
include/configs/pepper.h |
99 ++++++
include/configs/pxm2.h
| 2 +-
include/configs/s5p_goni.h
| 4 +-
include/configs/s5pc210_universal.h |
23 +-
include/configs/siemens-am33x-common.h
| 8 +-
include/configs/smdk5250.h
| 4 +
include/configs/smdk5420.h
| 4 +
include/configs/smdkv310.h
| 1 +
include/configs/snow.h
| 4 +
include/configs/tegra-common.h
| 7 +
include/configs/trats.h |
17 +-
include/configs/trats2.h |
17 +-
include/configs/udoo.h
| 2 +
include/configs/wandboard.h |
38 ++-
include/palmas.h
| 4 +
include/power/ltc3676_pmic.h |
51 +++
include/power/pfuze100_pmic.h
| 1 +
include/samsung/misc.h
| 2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
100644 arch/arm/lib/vectors.S create mode 100644
board/embest/mx6boards/Makefile create mode 100644
board/embest/mx6boards/mx6boards.c create mode 100644
board/gumstix/pepper/Makefile create mode 100644
board/gumstix/pepper/board.c create mode 100644
board/gumstix/pepper/board.h create mode 100644
board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
(63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
drivers/power/pmic/pmic_ltc3676.c create mode 100644
drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
create mode 100644 include/configs/embestmx6boards.h create mode
100644 include/configs/pepper.h create mode 100644
include/power/ltc3676_pmic.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-05-09 9:56 Albert ARIBAUD
@ 2014-05-09 16:15 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-05-09 16:15 UTC (permalink / raw)
To: u-boot
On Fri, May 09, 2014 at 11:56:56AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 173d294b94cfec10063a5be40934d6d8fb7981ce:
>
> Merge branch 'serial' of git://www.denx.de/git/u-boot-microblaze
> (2014-05-06 14:55:45 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19:
>
> Merge branch 'u-boot/master' (2014-05-09 11:50:14 +0200)
>
> Note that there was a trivial merge conflict between ARM and mainline
> trees on drivers/net/Makefile:
>
> <<<<<<< HEAD
> obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
> obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
> =======
> >>>>>>> u-boot/master
>
> This is solved in the ARM ToT commit d2a3e911.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (3):
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master'
>
> Karicheri, Muralidharan (6):
> tools: mkimage: add support for gpimage format
> NAND: DaVinci: allow forced disable of subpage writes
> i2c, davinci: move i2c_defs.h to the drivers/i2c directory
> spi: davinci: add support for multiple bus and chip select
> k2hk-evm: add configuration for spi1 and spi2 support
> keystone2: net: add keystone ethernet driver
>
> Manish Badarkhe (1):
> arm, da850: staticize funtions
>
> Nishanth Menon (11):
> OMAP: common: consolidate fake USB ethernet MAC address creation
> omap3/sys_info: provide interface to read die id
> OMAP3: beagle-xm: generate fake USB ethernet MAC address from
> dieid omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD
> OMAP3: zoom1: Configure GPMC for Ethernet
> OMAP3: zoom1: enable LAN9211
> omap3: zoom1: enable common network commands
> omap3: zoom1: disable JFFS2 and enable FS_GENERIC
> omap3: zoom1: enable bootz
> omap3: zoom1: fix default console
> omap3: zoom1: switch to generic ti_omap3_common config header
>
> Poddar, Sourav (1):
> spi: ti_qspi: Add delay for successful bulk erase.
>
> Rob Herring (2):
> ARM: highbank: use config_distro_defaults.h
> ARM: highbank: use default prompt
>
> Stefan Agner (3):
> usb: tegra: fix USB2 powerdown for Tegra30 and later
> usb: tegra: fix PHY configuration
> usb: tegra: combine header file
>
> Stephen Warren (14):
> ARM: tegra: pinctrl: remove func_safe
> ARM: tegra: pinctrl: remove vddio
> ARM: tegra: pinctrl: make pmux_func values consistent on Tegra20
> ARM: tegra: prototype pinmux_init() in board.h
> ARM: tegra: use apb_misc.h in more places
> ARM: tegra: pinctrl: remove duplication
> ARM: tegra: reduce public pinmux API
> ARM: tegra: pinmux naming consistency fixes
> ARM: tegra: Tegra20 pinmux cleanup
> ARM: tegra: Tegra30 pinmux cleanup
> ARM: tegra: Tegra114 pinmux cleanup
> ARM: tegra: Tegra124 pinmux cleanup
> ARM: tegra: add Jetson TK1 board
> ARM: tegra: pack pinmux data tables tighter
>
> Tom Rini (22):
> fw_env.c: Switch get_config to use '%ms' in sscanf
> env_mmc.c: Allow environment to be used within SPL
> env_mmc.c: Remove NULL check on tmp_env1/2
> mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem
> in SPL mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL
> am335x_evm: Make SPL_OS also check the boot_os variable for
> falcon mode README: Add CONFIG_SPL_OS_BOOT to README
> README.falcon: Document environment variables for falcon mode
> a3m071: Make spl_start_uboot test like getenv_yesno does
> spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what
> to boot TI: Add, use a DEFAULT_LINUX_BOOT_ENV environment string
> am335x_evm: Update the ramdisk args, we pass things in just fine
> via DT am43xx_evm: Update the ramdisk args, we pass things in just fine
> via DT TI:omap5: Move CONFIG_ENV_SIZE to board config files
> TI:armv7: Change Falcon Mode DT load address
> am335x_evm: Drop SPI SPL support from the default build
> SPL:SPI: Add Falcon Mode support
> dra7xx_evm: Add QSPI_4 support, qspiboot build target
> TI:armv7: Switch to CONFIG_SYS_BOARD_GENERIC
> TI:omap3: Convert omap3_beagle to ti_omap3_common.h
> am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or
> NOR_BOOT am43xx_evm: Drop SPI SPL
>
> Vitaly Andrianov (5):
> fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()
> arm: add support for arch timer
> i2c, davinci: convert driver to new mutlibus/mutliadapter
> framework k2hk: add support for k2hk SOC and EVM
> keystone2: add keystone multicore navigator driver
>
> Wolfgang Denk (3):
> ARM: OMAP: remove sr32() from OMAP board code
> ARM: OMAP: hide custom bit manipulation function sr32()
> ARM: OMAP: replace custom sr32() by standard I/O accessors
>
> Makefile | 10 ++
> README | 13 ++
> arch/arm/cpu/arm720t/tegra-common/spl.c | 6 +-
> arch/arm/cpu/arm720t/tegra114/cpu.c | 4 +-
> arch/arm/cpu/arm720t/tegra124/cpu.c | 4 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 6 +-
> arch/arm/cpu/arm926ejs/davinci/dm355.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm365.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm644x.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm646x.c | 2 +-
> arch/arm/cpu/armv7/Makefile | 1 +
> arch/arm/cpu/armv7/am33xx/board.c | 4 +-
> arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
> arch/arm/cpu/armv7/arch_timer.c | 58
> +++++++ arch/arm/cpu/armv7/keystone/Makefile
> | 17 ++ arch/arm/cpu/armv7/keystone/aemif.c
> | 71 ++++++++
> arch/arm/cpu/armv7/keystone/clock.c | 318
> +++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/keystone/cmd_clock.c | 124
> ++++++++++++++
> arch/arm/cpu/armv7/keystone/cmd_mon.c | 131
> +++++++++++++++
> arch/arm/cpu/armv7/keystone/ddr3.c | 69
> ++++++++ arch/arm/cpu/armv7/keystone/init.c
> | 56 ++++++
> arch/arm/cpu/armv7/keystone/keystone_nav.c | 376
> +++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/keystone/msmc.c | 68
> ++++++++ arch/arm/cpu/armv7/keystone/psc.c
> | 237 ++++++++++++++++++++++++++
> arch/arm/cpu/armv7/keystone/spl.c | 45
> +++++ arch/arm/cpu/armv7/omap-common/boot-common.c |
> 11 ++ arch/arm/cpu/armv7/omap-common/utils.c |
> 21 +++ arch/arm/cpu/armv7/omap3/board.c
> | 4 +- arch/arm/cpu/armv7/omap3/clock.c
> | 355 +++++++++++++++++++++-----------------
> arch/arm/cpu/armv7/omap3/sys_info.c | 19 ++-
> arch/arm/cpu/armv7/syslib.c | 13 --
> arch/arm/cpu/tegra-common/Makefile | 6 +-
> arch/arm/cpu/tegra-common/pinmux-common.c | 508
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/tegra114-common/funcmux.c | 32
> ++-- arch/arm/cpu/tegra114-common/pinmux.c |
> 895
> ++++++++++++++++++++++++------------------------------------------------------------------------
> arch/arm/cpu/tegra124-common/funcmux.c | 38
> +++-- arch/arm/cpu/tegra124-common/pinmux.c |
> 898
> ++++++++++++++++++++++++++-----------------------------------------------------------------------
> arch/arm/cpu/tegra20-common/emc.c | 2 +-
> arch/arm/cpu/tegra20-common/funcmux.c | 185
> ++++++++++----------
> arch/arm/cpu/tegra20-common/pinmux.c | 416
> ++++++++++++++++-----------------------------
> arch/arm/cpu/tegra20-common/warmboot.c | 8 +-
> arch/arm/cpu/tegra20-common/warmboot_avp.c | 6 +-
> arch/arm/cpu/tegra30-common/funcmux.c | 20 ++-
> arch/arm/cpu/tegra30-common/pinmux.c | 948
> +++++++++++++++++++++++++++++-------------------------------------------------------------------------
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/tegra124-jetson-tk1.dts | 84
> +++++++++ arch/arm/include/asm/arch-davinci/da850_lowlevel.h
> | 3 - arch/arm/include/asm/arch-davinci/i2c_defs.h
> | 71 +-------
> arch/arm/include/asm/arch-keystone/clock-k2hk.h | 109
> ++++++++++++
> arch/arm/include/asm/arch-keystone/clock.h | 17 ++
> arch/arm/include/asm/arch-keystone/clock_defs.h | 111
> ++++++++++++
> arch/arm/include/asm/arch-keystone/emac_defs.h | 240
> ++++++++++++++++++++++++++
> arch/arm/include/asm/arch-keystone/emif_defs.h | 73
> ++++++++ arch/arm/include/asm/arch-keystone/hardware-k2hk.h
> | 150 +++++++++++++++++
> arch/arm/include/asm/arch-keystone/hardware.h | 175
> +++++++++++++++++++
> arch/arm/include/asm/arch-keystone/i2c_defs.h | 17 ++
> arch/arm/include/asm/arch-keystone/keystone_nav.h | 193
> +++++++++++++++++++++
> arch/arm/include/asm/arch-keystone/nand_defs.h | 23 +++
> arch/arm/include/asm/arch-keystone/psc_defs.h | 90
> ++++++++++
> arch/arm/include/asm/arch-keystone/spl.h | 12 ++
> arch/arm/include/asm/arch-omap3/sys_proto.h | 3 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
> arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
> arch/arm/include/asm/{arch-tegra20 => arch-tegra}/apb_misc.h | 2 +
> arch/arm/include/asm/arch-tegra/board.h | 1 +
> arch/arm/include/asm/arch-tegra/pinmux.h | 185
> ++++++++++++++++++++
> arch/arm/include/asm/arch-tegra/usb.h | 223
> +++++++++++++++++++++++-
> arch/arm/include/asm/arch-tegra114/pinmux.h | 836
> +++++++++++++++++++++++++++++-------------------------------------------------------------
> arch/arm/include/asm/arch-tegra114/usb.h | 156
> -----------------
> arch/arm/include/asm/arch-tegra124/pinmux.h | 866
> ++++++++++++++++++++++++++++++++-------------------------------------------------------------
> arch/arm/include/asm/arch-tegra124/usb.h | 268
> -----------------------------
> arch/arm/include/asm/arch-tegra20/pinmux.h | 372
> +++++++++++++++-------------------------
> arch/arm/include/asm/arch-tegra20/usb.h | 155
> -----------------
> arch/arm/include/asm/arch-tegra30/pinmux.h | 963
> ++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
> arch/arm/include/asm/arch-tegra30/usb.h | 168
> ------------------
> arch/arm/include/asm/omap_common.h | 2 +
> board/a3m071/a3m071.c | 3 +-
> board/avionic-design/common/pinmux-config-tamonten-ng.h | 492
> ++++++++++++++++++++++++++---------------------------
> board/avionic-design/common/tamonten-ng.c | 12 +-
> board/avionic-design/common/tamonten.c | 4 +-
> board/compal/paz00/paz00.c | 22 +--
> board/compulab/trimslice/trimslice.c | 4 +-
> board/logicpd/zoom1/config.mk | 1 -
> board/logicpd/zoom1/zoom1.c | 38
> ++++- board/logicpd/zoom1/zoom1.h |
> 19 ++- board/nvidia/cardhu/cardhu.c
> | 6 +- board/nvidia/cardhu/pinmux-config-cardhu.h
> | 498 +++++++++++++++++++++++++++---------------------------
> board/nvidia/common/board.c | 9 +-
> board/nvidia/dalmore/dalmore.c | 9 +-
> board/nvidia/dalmore/pinmux-config-dalmore.h | 388
> +++++++++++++++++++++---------------------
> board/nvidia/harmony/harmony.c | 18 +-
> board/nvidia/jetson-tk1/Makefile | 9 +
> board/nvidia/jetson-tk1/jetson-tk1.c | 23 +++
> board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h | 227
> +++++++++++++++++++++++++
> board/nvidia/seaboard/seaboard.c | 6 +-
> board/nvidia/venice2/as3722_init.h | 4 +
> board/nvidia/venice2/pinmux-config-venice2.h | 360
> +++++++++++++++++++--------------------
> board/nvidia/venice2/venice2.c | 15 +-
> board/silica/pengwyn/Makefile | 2 +-
> board/ti/am335x/Makefile | 2 +-
> board/ti/am335x/board.c | 15 +-
> board/ti/beagle/beagle.c | 11 ++
> board/ti/dra7xx/evm.c | 19 +++
> board/ti/k2hk_evm/Makefile | 9 +
> board/ti/k2hk_evm/README | 122
> ++++++++++++++
> board/ti/k2hk_evm/board.c | 301
> +++++++++++++++++++++++++++++++++
> board/ti/k2hk_evm/ddr3.c | 268
> +++++++++++++++++++++++++++++
> board/ti/omap5_uevm/evm.c | 25 +--
> board/ti/panda/panda.c | 23 +--
> board/toradex/colibri_t20-common/colibri_t20-common.c | 8 +-
> board/toradex/colibri_t20_iris/colibri_t20_iris.c | 4 +-
> boards.cfg | 5 +-
> common/env_mmc.c | 49
> ++++-- common/image-fdt.c
> | 5 + common/image.c
> | 1 + common/spl/spl_fat.c
> | 27 +++ doc/README.falcon
> | 13 ++ drivers/i2c/Makefile
> | 2 +- drivers/i2c/davinci_i2c.c
> | 402 +++++++++++++++++++++++++------------------
> drivers/i2c/davinci_i2c.h | 78
> +++++++++ drivers/mtd/nand/Makefile
> | 3 + drivers/mtd/nand/am335x_spl_bch.c
> | 54 +++---
> drivers/mtd/nand/davinci_nand.c | 3 +
> drivers/mtd/spi/spi_spl_load.c | 46
> ++++- drivers/net/Makefile |
> 2 + drivers/net/keystone_net.c | 716
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/serial/ns16550.c | 8 +
> drivers/spi/davinci_spi.c | 49
> +++++- drivers/spi/davinci_spi.h |
> 33 ++++ drivers/spi/tegra20_sflash.c
> | 6 +- drivers/spi/ti_qspi.c
> | 3 + drivers/usb/host/ehci-tegra.c
> | 28 ++- drivers/video/tegra.c
> | 4 +- include/configs/am335x_evm.h
> | 25 ++- include/configs/am43xx_evm.h
> | 17 +- include/configs/cam_enc_4xx.h
> | 8 +- include/configs/da830evm.h
> | 8 +- include/configs/da850evm.h
> | 8 +- include/configs/davinci_dm355evm.h
> | 8 +- include/configs/davinci_dm355leopard.h
> | 8 +- include/configs/davinci_dm365evm.h
> | 8 +- include/configs/davinci_dm6467evm.h
> | 8 +- include/configs/davinci_dvevm.h
> | 8 +- include/configs/davinci_schmoogie.h
> | 8 +- include/configs/davinci_sffsdr.h
> | 8 +- include/configs/davinci_sonata.h
> | 8 +- include/configs/dra7xx_evm.h
> | 38 ++++-
> include/configs/ea20.h | 7 +-
> include/configs/enbw_cmc.h | 8 +-
> include/configs/highbank.h | 26 +--
> include/configs/jetson-tk1.h | 79
> +++++++++ include/configs/k2hk_evm.h
> | 256 ++++++++++++++++++++++++++++
> include/configs/omap3_beagle.h | 184
> ++------------------
> include/configs/omap3_zoom1.h | 167
> ++++++------------
> include/configs/omap5_uevm.h | 1 +
> include/configs/ti_am335x_common.h | 2 +
> include/configs/ti_armv7_common.h | 34
> +++- include/configs/ti_omap3_common.h |
> 4 + include/configs/ti_omap4_common.h | 6
> +- include/configs/ti_omap5_common.h | 9
> +- include/fdt_support.h | 7
> + include/image.h | 1 +
> spl/Makefile | 1 +
> tools/Makefile | 2 +
> tools/env/fw_env.c | 13 +-
> tools/gpheader.h | 40
> +++++ tools/gpimage-common.c |
> 80 +++++++++
> tools/gpimage.c | 77
> +++++++++ tools/imagetool.c
> | 2 + tools/imagetool.h
> | 1 + tools/omapimage.c |
> 104 ++----------
> tools/omapimage.h | 5 -
> 172 files changed, 10253 insertions(+), 7128 deletions(-) create mode
> 100644 arch/arm/cpu/armv7/arch_timer.c create mode 100644
> arch/arm/cpu/armv7/keystone/Makefile create mode 100644
> arch/arm/cpu/armv7/keystone/aemif.c create mode 100644
> arch/arm/cpu/armv7/keystone/clock.c create mode 100644
> arch/arm/cpu/armv7/keystone/cmd_clock.c create mode 100644
> arch/arm/cpu/armv7/keystone/cmd_mon.c create mode 100644
> arch/arm/cpu/armv7/keystone/ddr3.c create mode 100644
> arch/arm/cpu/armv7/keystone/init.c create mode 100644
> arch/arm/cpu/armv7/keystone/keystone_nav.c create mode 100644
> arch/arm/cpu/armv7/keystone/msmc.c create mode 100644
> arch/arm/cpu/armv7/keystone/psc.c create mode 100644
> arch/arm/cpu/armv7/keystone/spl.c create mode 100644
> arch/arm/cpu/tegra-common/pinmux-common.c create mode 100644
> arch/arm/dts/tegra124-jetson-tk1.dts create mode 100644
> arch/arm/include/asm/arch-keystone/clock-k2hk.h create mode 100644
> arch/arm/include/asm/arch-keystone/clock.h create mode 100644
> arch/arm/include/asm/arch-keystone/clock_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/emac_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/emif_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/hardware-k2hk.h create mode 100644
> arch/arm/include/asm/arch-keystone/hardware.h create mode 100644
> arch/arm/include/asm/arch-keystone/i2c_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/keystone_nav.h create mode 100644
> arch/arm/include/asm/arch-keystone/nand_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/psc_defs.h create mode 100644
> arch/arm/include/asm/arch-keystone/spl.h rename
> arch/arm/include/asm/{arch-tegra20 => arch-tegra}/apb_misc.h (87%)
> create mode 100644 arch/arm/include/asm/arch-tegra/pinmux.h delete
> mode 100644 arch/arm/include/asm/arch-tegra114/usb.h delete mode
> 100644 arch/arm/include/asm/arch-tegra124/usb.h delete mode 100644
> arch/arm/include/asm/arch-tegra20/usb.h delete mode 100644
> arch/arm/include/asm/arch-tegra30/usb.h create mode 100644
> board/nvidia/jetson-tk1/Makefile create mode 100644
> board/nvidia/jetson-tk1/jetson-tk1.c create mode 100644
> board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h create mode 100644
> board/ti/k2hk_evm/Makefile create mode 100644 board/ti/k2hk_evm/README
> create mode 100644 board/ti/k2hk_evm/board.c create mode 100644
> board/ti/k2hk_evm/ddr3.c create mode 100644 drivers/i2c/davinci_i2c.h
> create mode 100644 drivers/net/keystone_net.c create mode 100644
> include/configs/jetson-tk1.h create mode 100644
> include/configs/k2hk_evm.h create mode 100644 tools/gpheader.h create
> mode 100644 tools/gpimage-common.c create mode 100644 tools/gpimage.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140509/9e64cdcc/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-05-09 9:56 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
173d294b94cfec10063a5be40934d6d8fb7981ce:
Merge branch 'serial' of git://www.denx.de/git/u-boot-microblaze
(2014-05-06 14:55:45 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19:
Merge branch 'u-boot/master' (2014-05-09 11:50:14 +0200)
Note that there was a trivial merge conflict between ARM and mainline
trees on drivers/net/Makefile:
<<<<<<< HEAD
obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
=======
>>>>>>> u-boot/master
This is solved in the ARM ToT commit d2a3e911.
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master'
Karicheri, Muralidharan (6):
tools: mkimage: add support for gpimage format
NAND: DaVinci: allow forced disable of subpage writes
i2c, davinci: move i2c_defs.h to the drivers/i2c directory
spi: davinci: add support for multiple bus and chip select
k2hk-evm: add configuration for spi1 and spi2 support
keystone2: net: add keystone ethernet driver
Manish Badarkhe (1):
arm, da850: staticize funtions
Nishanth Menon (11):
OMAP: common: consolidate fake USB ethernet MAC address creation
omap3/sys_info: provide interface to read die id
OMAP3: beagle-xm: generate fake USB ethernet MAC address from
dieid omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD
OMAP3: zoom1: Configure GPMC for Ethernet
OMAP3: zoom1: enable LAN9211
omap3: zoom1: enable common network commands
omap3: zoom1: disable JFFS2 and enable FS_GENERIC
omap3: zoom1: enable bootz
omap3: zoom1: fix default console
omap3: zoom1: switch to generic ti_omap3_common config header
Poddar, Sourav (1):
spi: ti_qspi: Add delay for successful bulk erase.
Rob Herring (2):
ARM: highbank: use config_distro_defaults.h
ARM: highbank: use default prompt
Stefan Agner (3):
usb: tegra: fix USB2 powerdown for Tegra30 and later
usb: tegra: fix PHY configuration
usb: tegra: combine header file
Stephen Warren (14):
ARM: tegra: pinctrl: remove func_safe
ARM: tegra: pinctrl: remove vddio
ARM: tegra: pinctrl: make pmux_func values consistent on Tegra20
ARM: tegra: prototype pinmux_init() in board.h
ARM: tegra: use apb_misc.h in more places
ARM: tegra: pinctrl: remove duplication
ARM: tegra: reduce public pinmux API
ARM: tegra: pinmux naming consistency fixes
ARM: tegra: Tegra20 pinmux cleanup
ARM: tegra: Tegra30 pinmux cleanup
ARM: tegra: Tegra114 pinmux cleanup
ARM: tegra: Tegra124 pinmux cleanup
ARM: tegra: add Jetson TK1 board
ARM: tegra: pack pinmux data tables tighter
Tom Rini (22):
fw_env.c: Switch get_config to use '%ms' in sscanf
env_mmc.c: Allow environment to be used within SPL
env_mmc.c: Remove NULL check on tmp_env1/2
mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem
in SPL mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL
am335x_evm: Make SPL_OS also check the boot_os variable for
falcon mode README: Add CONFIG_SPL_OS_BOOT to README
README.falcon: Document environment variables for falcon mode
a3m071: Make spl_start_uboot test like getenv_yesno does
spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what
to boot TI: Add, use a DEFAULT_LINUX_BOOT_ENV environment string
am335x_evm: Update the ramdisk args, we pass things in just fine
via DT am43xx_evm: Update the ramdisk args, we pass things in just fine
via DT TI:omap5: Move CONFIG_ENV_SIZE to board config files
TI:armv7: Change Falcon Mode DT load address
am335x_evm: Drop SPI SPL support from the default build
SPL:SPI: Add Falcon Mode support
dra7xx_evm: Add QSPI_4 support, qspiboot build target
TI:armv7: Switch to CONFIG_SYS_BOARD_GENERIC
TI:omap3: Convert omap3_beagle to ti_omap3_common.h
am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or
NOR_BOOT am43xx_evm: Drop SPI SPL
Vitaly Andrianov (5):
fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()
arm: add support for arch timer
i2c, davinci: convert driver to new mutlibus/mutliadapter
framework k2hk: add support for k2hk SOC and EVM
keystone2: add keystone multicore navigator driver
Wolfgang Denk (3):
ARM: OMAP: remove sr32() from OMAP board code
ARM: OMAP: hide custom bit manipulation function sr32()
ARM: OMAP: replace custom sr32() by standard I/O accessors
Makefile | 10 ++
README | 13 ++
arch/arm/cpu/arm720t/tegra-common/spl.c | 6 +-
arch/arm/cpu/arm720t/tegra114/cpu.c | 4 +-
arch/arm/cpu/arm720t/tegra124/cpu.c | 4 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 6 +-
arch/arm/cpu/arm926ejs/davinci/dm355.c | 2 +-
arch/arm/cpu/arm926ejs/davinci/dm365.c | 2 +-
arch/arm/cpu/arm926ejs/davinci/dm644x.c | 2 +-
arch/arm/cpu/arm926ejs/davinci/dm646x.c | 2 +-
arch/arm/cpu/armv7/Makefile | 1 +
arch/arm/cpu/armv7/am33xx/board.c | 4 +-
arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
arch/arm/cpu/armv7/arch_timer.c | 58
+++++++ arch/arm/cpu/armv7/keystone/Makefile
| 17 ++ arch/arm/cpu/armv7/keystone/aemif.c
| 71 ++++++++
arch/arm/cpu/armv7/keystone/clock.c | 318
+++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/keystone/cmd_clock.c | 124
++++++++++++++
arch/arm/cpu/armv7/keystone/cmd_mon.c | 131
+++++++++++++++
arch/arm/cpu/armv7/keystone/ddr3.c | 69
++++++++ arch/arm/cpu/armv7/keystone/init.c
| 56 ++++++
arch/arm/cpu/armv7/keystone/keystone_nav.c | 376
+++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/keystone/msmc.c | 68
++++++++ arch/arm/cpu/armv7/keystone/psc.c
| 237 ++++++++++++++++++++++++++
arch/arm/cpu/armv7/keystone/spl.c | 45
+++++ arch/arm/cpu/armv7/omap-common/boot-common.c |
11 ++ arch/arm/cpu/armv7/omap-common/utils.c |
21 +++ arch/arm/cpu/armv7/omap3/board.c
| 4 +- arch/arm/cpu/armv7/omap3/clock.c
| 355 +++++++++++++++++++++-----------------
arch/arm/cpu/armv7/omap3/sys_info.c | 19 ++-
arch/arm/cpu/armv7/syslib.c | 13 --
arch/arm/cpu/tegra-common/Makefile | 6 +-
arch/arm/cpu/tegra-common/pinmux-common.c | 508
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/tegra114-common/funcmux.c | 32
++-- arch/arm/cpu/tegra114-common/pinmux.c |
895
++++++++++++++++++++++++------------------------------------------------------------------------
arch/arm/cpu/tegra124-common/funcmux.c | 38
+++-- arch/arm/cpu/tegra124-common/pinmux.c |
898
++++++++++++++++++++++++++-----------------------------------------------------------------------
arch/arm/cpu/tegra20-common/emc.c | 2 +-
arch/arm/cpu/tegra20-common/funcmux.c | 185
++++++++++----------
arch/arm/cpu/tegra20-common/pinmux.c | 416
++++++++++++++++-----------------------------
arch/arm/cpu/tegra20-common/warmboot.c | 8 +-
arch/arm/cpu/tegra20-common/warmboot_avp.c | 6 +-
arch/arm/cpu/tegra30-common/funcmux.c | 20 ++-
arch/arm/cpu/tegra30-common/pinmux.c | 948
+++++++++++++++++++++++++++++-------------------------------------------------------------------------
arch/arm/dts/Makefile | 1 +
arch/arm/dts/tegra124-jetson-tk1.dts | 84
+++++++++ arch/arm/include/asm/arch-davinci/da850_lowlevel.h
| 3 - arch/arm/include/asm/arch-davinci/i2c_defs.h
| 71 +-------
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 109
++++++++++++
arch/arm/include/asm/arch-keystone/clock.h | 17 ++
arch/arm/include/asm/arch-keystone/clock_defs.h | 111
++++++++++++
arch/arm/include/asm/arch-keystone/emac_defs.h | 240
++++++++++++++++++++++++++
arch/arm/include/asm/arch-keystone/emif_defs.h | 73
++++++++ arch/arm/include/asm/arch-keystone/hardware-k2hk.h
| 150 +++++++++++++++++
arch/arm/include/asm/arch-keystone/hardware.h | 175
+++++++++++++++++++
arch/arm/include/asm/arch-keystone/i2c_defs.h | 17 ++
arch/arm/include/asm/arch-keystone/keystone_nav.h | 193
+++++++++++++++++++++
arch/arm/include/asm/arch-keystone/nand_defs.h | 23 +++
arch/arm/include/asm/arch-keystone/psc_defs.h | 90
++++++++++
arch/arm/include/asm/arch-keystone/spl.h | 12 ++
arch/arm/include/asm/arch-omap3/sys_proto.h | 3 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
arch/arm/include/asm/{arch-tegra20 => arch-tegra}/apb_misc.h | 2 +
arch/arm/include/asm/arch-tegra/board.h | 1 +
arch/arm/include/asm/arch-tegra/pinmux.h | 185
++++++++++++++++++++
arch/arm/include/asm/arch-tegra/usb.h | 223
+++++++++++++++++++++++-
arch/arm/include/asm/arch-tegra114/pinmux.h | 836
+++++++++++++++++++++++++++++-------------------------------------------------------------
arch/arm/include/asm/arch-tegra114/usb.h | 156
-----------------
arch/arm/include/asm/arch-tegra124/pinmux.h | 866
++++++++++++++++++++++++++++++++-------------------------------------------------------------
arch/arm/include/asm/arch-tegra124/usb.h | 268
-----------------------------
arch/arm/include/asm/arch-tegra20/pinmux.h | 372
+++++++++++++++-------------------------
arch/arm/include/asm/arch-tegra20/usb.h | 155
-----------------
arch/arm/include/asm/arch-tegra30/pinmux.h | 963
++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
arch/arm/include/asm/arch-tegra30/usb.h | 168
------------------
arch/arm/include/asm/omap_common.h | 2 +
board/a3m071/a3m071.c | 3 +-
board/avionic-design/common/pinmux-config-tamonten-ng.h | 492
++++++++++++++++++++++++++---------------------------
board/avionic-design/common/tamonten-ng.c | 12 +-
board/avionic-design/common/tamonten.c | 4 +-
board/compal/paz00/paz00.c | 22 +--
board/compulab/trimslice/trimslice.c | 4 +-
board/logicpd/zoom1/config.mk | 1 -
board/logicpd/zoom1/zoom1.c | 38
++++- board/logicpd/zoom1/zoom1.h |
19 ++- board/nvidia/cardhu/cardhu.c
| 6 +- board/nvidia/cardhu/pinmux-config-cardhu.h
| 498 +++++++++++++++++++++++++++---------------------------
board/nvidia/common/board.c | 9 +-
board/nvidia/dalmore/dalmore.c | 9 +-
board/nvidia/dalmore/pinmux-config-dalmore.h | 388
+++++++++++++++++++++---------------------
board/nvidia/harmony/harmony.c | 18 +-
board/nvidia/jetson-tk1/Makefile | 9 +
board/nvidia/jetson-tk1/jetson-tk1.c | 23 +++
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h | 227
+++++++++++++++++++++++++
board/nvidia/seaboard/seaboard.c | 6 +-
board/nvidia/venice2/as3722_init.h | 4 +
board/nvidia/venice2/pinmux-config-venice2.h | 360
+++++++++++++++++++--------------------
board/nvidia/venice2/venice2.c | 15 +-
board/silica/pengwyn/Makefile | 2 +-
board/ti/am335x/Makefile | 2 +-
board/ti/am335x/board.c | 15 +-
board/ti/beagle/beagle.c | 11 ++
board/ti/dra7xx/evm.c | 19 +++
board/ti/k2hk_evm/Makefile | 9 +
board/ti/k2hk_evm/README | 122
++++++++++++++
board/ti/k2hk_evm/board.c | 301
+++++++++++++++++++++++++++++++++
board/ti/k2hk_evm/ddr3.c | 268
+++++++++++++++++++++++++++++
board/ti/omap5_uevm/evm.c | 25 +--
board/ti/panda/panda.c | 23 +--
board/toradex/colibri_t20-common/colibri_t20-common.c | 8 +-
board/toradex/colibri_t20_iris/colibri_t20_iris.c | 4 +-
boards.cfg | 5 +-
common/env_mmc.c | 49
++++-- common/image-fdt.c
| 5 + common/image.c
| 1 + common/spl/spl_fat.c
| 27 +++ doc/README.falcon
| 13 ++ drivers/i2c/Makefile
| 2 +- drivers/i2c/davinci_i2c.c
| 402 +++++++++++++++++++++++++------------------
drivers/i2c/davinci_i2c.h | 78
+++++++++ drivers/mtd/nand/Makefile
| 3 + drivers/mtd/nand/am335x_spl_bch.c
| 54 +++---
drivers/mtd/nand/davinci_nand.c | 3 +
drivers/mtd/spi/spi_spl_load.c | 46
++++- drivers/net/Makefile |
2 + drivers/net/keystone_net.c | 716
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/serial/ns16550.c | 8 +
drivers/spi/davinci_spi.c | 49
+++++- drivers/spi/davinci_spi.h |
33 ++++ drivers/spi/tegra20_sflash.c
| 6 +- drivers/spi/ti_qspi.c
| 3 + drivers/usb/host/ehci-tegra.c
| 28 ++- drivers/video/tegra.c
| 4 +- include/configs/am335x_evm.h
| 25 ++- include/configs/am43xx_evm.h
| 17 +- include/configs/cam_enc_4xx.h
| 8 +- include/configs/da830evm.h
| 8 +- include/configs/da850evm.h
| 8 +- include/configs/davinci_dm355evm.h
| 8 +- include/configs/davinci_dm355leopard.h
| 8 +- include/configs/davinci_dm365evm.h
| 8 +- include/configs/davinci_dm6467evm.h
| 8 +- include/configs/davinci_dvevm.h
| 8 +- include/configs/davinci_schmoogie.h
| 8 +- include/configs/davinci_sffsdr.h
| 8 +- include/configs/davinci_sonata.h
| 8 +- include/configs/dra7xx_evm.h
| 38 ++++-
include/configs/ea20.h | 7 +-
include/configs/enbw_cmc.h | 8 +-
include/configs/highbank.h | 26 +--
include/configs/jetson-tk1.h | 79
+++++++++ include/configs/k2hk_evm.h
| 256 ++++++++++++++++++++++++++++
include/configs/omap3_beagle.h | 184
++------------------
include/configs/omap3_zoom1.h | 167
++++++------------
include/configs/omap5_uevm.h | 1 +
include/configs/ti_am335x_common.h | 2 +
include/configs/ti_armv7_common.h | 34
+++- include/configs/ti_omap3_common.h |
4 + include/configs/ti_omap4_common.h | 6
+- include/configs/ti_omap5_common.h | 9
+- include/fdt_support.h | 7
+ include/image.h | 1 +
spl/Makefile | 1 +
tools/Makefile | 2 +
tools/env/fw_env.c | 13 +-
tools/gpheader.h | 40
+++++ tools/gpimage-common.c |
80 +++++++++
tools/gpimage.c | 77
+++++++++ tools/imagetool.c
| 2 + tools/imagetool.h
| 1 + tools/omapimage.c |
104 ++----------
tools/omapimage.h | 5 -
172 files changed, 10253 insertions(+), 7128 deletions(-) create mode
100644 arch/arm/cpu/armv7/arch_timer.c create mode 100644
arch/arm/cpu/armv7/keystone/Makefile create mode 100644
arch/arm/cpu/armv7/keystone/aemif.c create mode 100644
arch/arm/cpu/armv7/keystone/clock.c create mode 100644
arch/arm/cpu/armv7/keystone/cmd_clock.c create mode 100644
arch/arm/cpu/armv7/keystone/cmd_mon.c create mode 100644
arch/arm/cpu/armv7/keystone/ddr3.c create mode 100644
arch/arm/cpu/armv7/keystone/init.c create mode 100644
arch/arm/cpu/armv7/keystone/keystone_nav.c create mode 100644
arch/arm/cpu/armv7/keystone/msmc.c create mode 100644
arch/arm/cpu/armv7/keystone/psc.c create mode 100644
arch/arm/cpu/armv7/keystone/spl.c create mode 100644
arch/arm/cpu/tegra-common/pinmux-common.c create mode 100644
arch/arm/dts/tegra124-jetson-tk1.dts create mode 100644
arch/arm/include/asm/arch-keystone/clock-k2hk.h create mode 100644
arch/arm/include/asm/arch-keystone/clock.h create mode 100644
arch/arm/include/asm/arch-keystone/clock_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/emac_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/emif_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/hardware-k2hk.h create mode 100644
arch/arm/include/asm/arch-keystone/hardware.h create mode 100644
arch/arm/include/asm/arch-keystone/i2c_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/keystone_nav.h create mode 100644
arch/arm/include/asm/arch-keystone/nand_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/psc_defs.h create mode 100644
arch/arm/include/asm/arch-keystone/spl.h rename
arch/arm/include/asm/{arch-tegra20 => arch-tegra}/apb_misc.h (87%)
create mode 100644 arch/arm/include/asm/arch-tegra/pinmux.h delete
mode 100644 arch/arm/include/asm/arch-tegra114/usb.h delete mode
100644 arch/arm/include/asm/arch-tegra124/usb.h delete mode 100644
arch/arm/include/asm/arch-tegra20/usb.h delete mode 100644
arch/arm/include/asm/arch-tegra30/usb.h create mode 100644
board/nvidia/jetson-tk1/Makefile create mode 100644
board/nvidia/jetson-tk1/jetson-tk1.c create mode 100644
board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h create mode 100644
board/ti/k2hk_evm/Makefile create mode 100644 board/ti/k2hk_evm/README
create mode 100644 board/ti/k2hk_evm/board.c create mode 100644
board/ti/k2hk_evm/ddr3.c create mode 100644 drivers/i2c/davinci_i2c.h
create mode 100644 drivers/net/keystone_net.c create mode 100644
include/configs/jetson-tk1.h create mode 100644
include/configs/k2hk_evm.h create mode 100644 tools/gpheader.h create
mode 100644 tools/gpimage-common.c create mode 100644 tools/gpimage.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-04-08 11:40 Albert ARIBAUD
@ 2014-04-08 16:39 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-04-08 16:39 UTC (permalink / raw)
To: u-boot
On Tue, Apr 08, 2014 at 01:40:10PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 04d2f0a9f33112bd70ce4d9c451fdca1682e3a59:
>
> Revert "Start the deprecation process for generic board" (2014-04-04
> 10:09:19 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 519fdde9e6a6ebce7dc743b4f5621503d25b7a45:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2014-04-08
> 09:25:08 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (6):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Andreas F?rber (1):
> arm: Handle .gnu.hash section in ldscripts
>
> Chin Liang See (1):
> socfpga: Adding Clock Manager driver
>
> David Feng (1):
> arm64 patch: gicv3 support
>
> Eric Nelson (1):
> ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
>
> Fabio Estevam (7):
> wandboard: Staticize usdhc1_pads
> mmc: Add a prototype for board_mmc_init()
> wandboard: Fix sparse warning
> wandboard: Include <input.h>
> fb: Add a prototype for board_video_skip()
> mx25pdk: Align the environment with other FSL boards
> woodburn_sd: Remove CONFIG_BOOT_INTERNAL
>
> Hannes Petermaier (2):
> board/BuR/kwb: fix usage of 'i2c_set_bus_speed'
> board: enable 32kHz RTC OSC at B&R boards
>
> Ilya Ledvich (1):
> drivers: net: cpsw: init phy with gigabit features
>
> Leo Yan (1):
> ARMv8: fix bug for flush data cache by set/way
>
> Marcel Ziswiler (4):
> arm: vf610: fix anadig register struct
> arm: vf610: add uart0 clock/iomux definitions
> arm: vf610: add enet1 support
> arm: vf610: fix double iomux configuration for vf610twr board
>
> Marek Vasut (13):
> arm: exynos: Squash bogus warnings in pinmux
> arm: mxs: Adjust the load address of U-Boot and SPL for HAB
> arm: mxs: Add support for generating signed BootStream
> ARM: mxs: Add OCOTP driver
> pci: mx6: Implement power callback
> ARM: mx6: Add PCIe on SabreSDP
> arm: mx5: Fix memory slowness on MX53QSB
> arm: mx5: Avoid hardcoding memory sizes on MX53QSB
> arm: mx5: Fix memory slowness on M53EVK
> arm: mx5: Avoid hardcoding memory sizes on M53EVK
> arm: mxs: Properly set GD pointer in SPL
> arm: mxs: Add serial console support into SPL
> arm: mxs: Add support for generating signed BootStream
>
> Mela Custodio (1):
> bootstage: arm: fix fdt stashing code
>
> Nitin Garg (3):
> ARM: Add workaround for Cortex-A9 errata 794072
> ARM: Add workaround for Cortex-A9 errata 761320
> MX6: Enable ARM errata workaround 794072 and 761320
>
> Piotr Wilczek (12):
> exynos4:pinmux:fdt: decode peripheral id
> video:mipidsim:fdt: Add DT support for mipi dsim driver
> video:exynos_fb:fdt: add additional fdt data
> drivers:mmc:sdhci: enable support for DT
> board:samsung: move checkboard to common file
> arm:exynos: add common DTS file for exynos 4
> board:samsung:common: move max77686 init function
> arm:exynos: enable sdhci and misc_init to common board
> board:origen: Enable device tree on Origen
> board:universal: Enable device tree on Universal
> board:trats: Enable device tree on Trats
> board:trats2: Enable device tree on Trats2
>
> Przemyslaw Marczak (2):
> Trats/Trats2: Update Tizen partitions layout and dfu entities
> usb: dfu: add static alt num count in dfu_config_entities()
>
> Stefan Roese (2):
> arm: omap: cm_t35: Fix: Re-add GPMC_NAND_ECC_LP_x8_LAYOUT
> arm: am335x: DXR2: Move unconditional LAN9303 reset into command
>
> Stefano Babic (6):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> mxs: fix warning in SPL with console support
> imx: add rules for U-Boot DTB support
> mx6: add example DTB for mx6qsabreauto
> Revert "arm: mxs: Add support for generating signed BootStream"
> Merge branch 'master' of git://git.denx.de/u-boot-arm into master
>
> Stephen Warren (1):
> ARM: tegra: make all I2C ports open-drain
>
> Tim Harvey (2):
> power: add PFUZE100 PMIC driver
> ventana: Add Gateworks Ventana family support
>
> Tom Rini (2):
> am33xx: Rework #ifdef's around s_init for clarity
> am335x_evm: Remove SPI SPL from NOR support target
>
> Vasili Galka (1):
> drivers/spi/omap3: Bug fix of premature write transfer completion
>
> York Sun (4):
> armv8/cache: Consolidate setting for MAIR and TCR
> armv8/cache: Flush D-cache, invalidate I-cache for relocation
> armv8/cache: Change cache invalidate and flush function
> armv8: Flush dcache before switching to EL2
>
> ?ukasz Majewski (2):
> config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to
> 0x43e00000 build:arm: Remove setting of CROSS_COMPILE environment
> variable
>
> Makefile | 8 +-
> README | 2 +
> arch/arm/config.mk | 8 +-
> arch/arm/cpu/arm926ejs/mxs/Makefile | 60 +
> arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg | 10 +
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 8 +-
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 8 +-
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 35 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/am33xx/board.c | 8 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 29 +
> arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/clock_manager.c | 361 ++++++
> arch/arm/cpu/armv7/socfpga/spl.c | 89 ++
> arch/arm/cpu/armv7/start.S | 7 +-
> arch/arm/cpu/armv8/Makefile | 1 -
> arch/arm/cpu/armv8/cache.S | 57 +-
> arch/arm/cpu/armv8/cache_v8.c | 25 +-
> arch/arm/cpu/armv8/gic.S | 106 --
> arch/arm/cpu/armv8/start.S | 84 +-
> arch/arm/cpu/u-boot.lds | 1 +
> arch/arm/dts/Makefile | 6 +
> arch/arm/dts/exynos4.dtsi | 138 +++
> arch/arm/dts/exynos4210-origen.dts | 45 +
> arch/arm/dts/exynos4210-trats.dts | 120 ++
> arch/arm/dts/exynos4210-universal_c210.dts | 83 ++
> arch/arm/dts/exynos4412-trats2.dts | 434 +++++++
> arch/arm/dts/imx6q-sabreauto.dts | 13 +
> arch/arm/imx-common/Makefile | 8 +
> arch/arm/include/asm/arch-exynos/board.h | 12 +
> arch/arm/include/asm/arch-exynos/mipi_dsim.h | 5 +
> arch/arm/include/asm/arch-exynos/mmc.h | 7 +
> arch/arm/include/asm/arch-socfpga/clock_manager.h | 205 ++++
> .../include/asm/arch-socfpga/socfpga_base_addrs.h | 1 +
> arch/arm/include/asm/arch-vf610/crm_regs.h | 57 +-
> arch/arm/include/asm/arch-vf610/imx-regs.h | 1 +
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 12 +
> arch/arm/include/asm/gic.h | 56 +
> arch/arm/include/asm/system.h | 1 +
> arch/arm/lib/Makefile | 1 +
> arch/arm/lib/bootm.c | 4 +-
> arch/arm/lib/gic_64.S | 194 +++
> arch/arm/lib/relocate_64.S | 19 +
> board/BuR/kwb/board.c | 4 +-
> board/altera/socfpga/pll_config.h | 118 ++
> board/denx/m53evk/m53evk.c | 31 +-
> board/freescale/mx53loco/mx53loco.c | 31 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 11 +
> board/freescale/vf610twr/vf610twr.c | 1 -
> board/gateworks/gw_ventana/Makefile | 10 +
> board/gateworks/gw_ventana/README | 55 +
> board/gateworks/gw_ventana/clocks.cfg | 42 +
> board/gateworks/gw_ventana/gsc.c | 129 ++
> board/gateworks/gw_ventana/gsc.h | 64 +
> board/gateworks/gw_ventana/gw_ventana.c | 1263
> ++++++++++++++++++++
> board/gateworks/gw_ventana/gw_ventana.cfg | 44 +
> board/gateworks/gw_ventana/ventana_eeprom.h | 106 ++
> board/nvidia/dalmore/pinmux-config-dalmore.h | 16 +-
> board/nvidia/venice2/pinmux-config-venice2.h | 16 +-
> board/samsung/common/board.c | 180 +--
> board/samsung/origen/origen.c | 112 +-
> board/samsung/smdk5250/exynos5-dt.c | 15 -
> board/samsung/smdk5250/smdk5250.c | 125 ++
> board/samsung/smdk5420/smdk5420.c | 15 -
> board/samsung/trats/trats.c | 213 +---
> board/samsung/trats2/trats2.c | 233 +---
> board/samsung/universal_c210/universal.c | 204 +---
> board/siemens/dxr2/board.c | 26 +-
> board/ti/am335x/u-boot.lds | 1 +
> board/wandboard/wandboard.c | 4 +-
> boards.cfg | 5 +
> doc/device-tree-bindings/video/exynos_mipi_dsi.txt | 82 ++
> drivers/dfu/dfu.c | 6 +-
> drivers/misc/Makefile | 1 +
> drivers/misc/mxs_ocotp.c | 311 +++++
> drivers/mmc/s5p_sdhci.c | 129 ++
> drivers/net/cpsw.c | 6 +-
> drivers/pci/pcie_imx.c | 13 +-
> drivers/power/pmic/Makefile | 1 +
> drivers/power/pmic/pmic_pfuze100.c | 32 +
> drivers/spi/omap3_spi.c | 5 +-
> drivers/video/exynos_fb.c | 12 +
> drivers/video/exynos_mipi_dsi.c | 96 ++
> include/configs/am335x_evm.h | 2 +
> include/configs/bur_am335x_common.h | 2 +-
> include/configs/cm_t35.h | 2 +
> include/configs/exynos4-dt.h | 138 +++
> include/configs/gw_ventana.h | 425 +++++++
> include/configs/m53evk.h | 8 +-
> include/configs/mx25pdk.h | 103 +-
> include/configs/mx53loco.h | 10 +-
> include/configs/mx6_common.h | 2 +
> include/configs/mx6qsabreauto.h | 3 +
> include/configs/mx6sabresd.h | 10 +
> include/configs/mxs.h | 15 +-
> include/configs/nitrogen6x.h | 1 -
> include/configs/origen.h | 110 +-
> include/configs/s5pc210_universal.h | 152 +--
> include/configs/socfpga_cyclone5.h | 1 +
> include/configs/trats.h | 225 +---
> include/configs/trats2.h | 220 +---
> include/configs/vexpress_aemv8a.h | 7 +
> include/configs/woodburn_sd.h | 2 -
> include/fdtdec.h | 2 +
> include/linux/fb.h | 2 +
> include/mmc.h | 2 +
> include/phy.h | 2 +
> include/power/pfuze100_pmic.h | 96 ++
> include/sdhci.h | 5 +
> lib/fdtdec.c | 2 + 110 files
> changed, 6015 insertions(+), 1635 deletions(-) create mode 100644
> arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg create mode 100644
> arch/arm/cpu/armv7/socfpga/clock_manager.c delete mode 100644
> arch/arm/cpu/armv8/gic.S create mode 100644 arch/arm/dts/exynos4.dtsi
> create mode 100644 arch/arm/dts/exynos4210-origen.dts
> create mode 100644 arch/arm/dts/exynos4210-trats.dts
> create mode 100644 arch/arm/dts/exynos4210-universal_c210.dts
> create mode 100644 arch/arm/dts/exynos4412-trats2.dts
> create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
> create mode 100644 arch/arm/include/asm/arch-socfpga/clock_manager.h
> create mode 100644 arch/arm/lib/gic_64.S
> create mode 100644 board/altera/socfpga/pll_config.h
> create mode 100644 board/gateworks/gw_ventana/Makefile
> create mode 100644 board/gateworks/gw_ventana/README
> create mode 100644 board/gateworks/gw_ventana/clocks.cfg
> create mode 100644 board/gateworks/gw_ventana/gsc.c
> create mode 100644 board/gateworks/gw_ventana/gsc.h
> create mode 100644 board/gateworks/gw_ventana/gw_ventana.c
> create mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg
> create mode 100644 board/gateworks/gw_ventana/ventana_eeprom.h
> create mode 100644 doc/device-tree-bindings/video/exynos_mipi_dsi.txt
> create mode 100644 drivers/misc/mxs_ocotp.c
> create mode 100644 drivers/power/pmic/pmic_pfuze100.c
> create mode 100644 include/configs/exynos4-dt.h
> create mode 100644 include/configs/gw_ventana.h
> create mode 100644 include/power/pfuze100_pmic.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140408/6e00c85f/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-04-08 11:40 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
04d2f0a9f33112bd70ce4d9c451fdca1682e3a59:
Revert "Start the deprecation process for generic board" (2014-04-04
10:09:19 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 519fdde9e6a6ebce7dc743b4f5621503d25b7a45:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2014-04-08
09:25:08 +0200)
----------------------------------------------------------------
Albert ARIBAUD (6):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Andreas F?rber (1):
arm: Handle .gnu.hash section in ldscripts
Chin Liang See (1):
socfpga: Adding Clock Manager driver
David Feng (1):
arm64 patch: gicv3 support
Eric Nelson (1):
ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
Fabio Estevam (7):
wandboard: Staticize usdhc1_pads
mmc: Add a prototype for board_mmc_init()
wandboard: Fix sparse warning
wandboard: Include <input.h>
fb: Add a prototype for board_video_skip()
mx25pdk: Align the environment with other FSL boards
woodburn_sd: Remove CONFIG_BOOT_INTERNAL
Hannes Petermaier (2):
board/BuR/kwb: fix usage of 'i2c_set_bus_speed'
board: enable 32kHz RTC OSC at B&R boards
Ilya Ledvich (1):
drivers: net: cpsw: init phy with gigabit features
Leo Yan (1):
ARMv8: fix bug for flush data cache by set/way
Marcel Ziswiler (4):
arm: vf610: fix anadig register struct
arm: vf610: add uart0 clock/iomux definitions
arm: vf610: add enet1 support
arm: vf610: fix double iomux configuration for vf610twr board
Marek Vasut (13):
arm: exynos: Squash bogus warnings in pinmux
arm: mxs: Adjust the load address of U-Boot and SPL for HAB
arm: mxs: Add support for generating signed BootStream
ARM: mxs: Add OCOTP driver
pci: mx6: Implement power callback
ARM: mx6: Add PCIe on SabreSDP
arm: mx5: Fix memory slowness on MX53QSB
arm: mx5: Avoid hardcoding memory sizes on MX53QSB
arm: mx5: Fix memory slowness on M53EVK
arm: mx5: Avoid hardcoding memory sizes on M53EVK
arm: mxs: Properly set GD pointer in SPL
arm: mxs: Add serial console support into SPL
arm: mxs: Add support for generating signed BootStream
Mela Custodio (1):
bootstage: arm: fix fdt stashing code
Nitin Garg (3):
ARM: Add workaround for Cortex-A9 errata 794072
ARM: Add workaround for Cortex-A9 errata 761320
MX6: Enable ARM errata workaround 794072 and 761320
Piotr Wilczek (12):
exynos4:pinmux:fdt: decode peripheral id
video:mipidsim:fdt: Add DT support for mipi dsim driver
video:exynos_fb:fdt: add additional fdt data
drivers:mmc:sdhci: enable support for DT
board:samsung: move checkboard to common file
arm:exynos: add common DTS file for exynos 4
board:samsung:common: move max77686 init function
arm:exynos: enable sdhci and misc_init to common board
board:origen: Enable device tree on Origen
board:universal: Enable device tree on Universal
board:trats: Enable device tree on Trats
board:trats2: Enable device tree on Trats2
Przemyslaw Marczak (2):
Trats/Trats2: Update Tizen partitions layout and dfu entities
usb: dfu: add static alt num count in dfu_config_entities()
Stefan Roese (2):
arm: omap: cm_t35: Fix: Re-add GPMC_NAND_ECC_LP_x8_LAYOUT
arm: am335x: DXR2: Move unconditional LAN9303 reset into command
Stefano Babic (6):
Merge branch 'master' of git://git.denx.de/u-boot-arm
mxs: fix warning in SPL with console support
imx: add rules for U-Boot DTB support
mx6: add example DTB for mx6qsabreauto
Revert "arm: mxs: Add support for generating signed BootStream"
Merge branch 'master' of git://git.denx.de/u-boot-arm into master
Stephen Warren (1):
ARM: tegra: make all I2C ports open-drain
Tim Harvey (2):
power: add PFUZE100 PMIC driver
ventana: Add Gateworks Ventana family support
Tom Rini (2):
am33xx: Rework #ifdef's around s_init for clarity
am335x_evm: Remove SPI SPL from NOR support target
Vasili Galka (1):
drivers/spi/omap3: Bug fix of premature write transfer completion
York Sun (4):
armv8/cache: Consolidate setting for MAIR and TCR
armv8/cache: Flush D-cache, invalidate I-cache for relocation
armv8/cache: Change cache invalidate and flush function
armv8: Flush dcache before switching to EL2
?ukasz Majewski (2):
config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to
0x43e00000 build:arm: Remove setting of CROSS_COMPILE environment
variable
Makefile | 8 +-
README | 2 +
arch/arm/config.mk | 8 +-
arch/arm/cpu/arm926ejs/mxs/Makefile | 60 +
arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg | 10 +
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 8 +-
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 8 +-
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 35 +
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/am33xx/board.c | 8 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 29 +
arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
arch/arm/cpu/armv7/socfpga/clock_manager.c | 361 ++++++
arch/arm/cpu/armv7/socfpga/spl.c | 89 ++
arch/arm/cpu/armv7/start.S | 7 +-
arch/arm/cpu/armv8/Makefile | 1 -
arch/arm/cpu/armv8/cache.S | 57 +-
arch/arm/cpu/armv8/cache_v8.c | 25 +-
arch/arm/cpu/armv8/gic.S | 106 --
arch/arm/cpu/armv8/start.S | 84 +-
arch/arm/cpu/u-boot.lds | 1 +
arch/arm/dts/Makefile | 6 +
arch/arm/dts/exynos4.dtsi | 138 +++
arch/arm/dts/exynos4210-origen.dts | 45 +
arch/arm/dts/exynos4210-trats.dts | 120 ++
arch/arm/dts/exynos4210-universal_c210.dts | 83 ++
arch/arm/dts/exynos4412-trats2.dts | 434 +++++++
arch/arm/dts/imx6q-sabreauto.dts | 13 +
arch/arm/imx-common/Makefile | 8 +
arch/arm/include/asm/arch-exynos/board.h | 12 +
arch/arm/include/asm/arch-exynos/mipi_dsim.h | 5 +
arch/arm/include/asm/arch-exynos/mmc.h | 7 +
arch/arm/include/asm/arch-socfpga/clock_manager.h | 205 ++++
.../include/asm/arch-socfpga/socfpga_base_addrs.h | 1 +
arch/arm/include/asm/arch-vf610/crm_regs.h | 57 +-
arch/arm/include/asm/arch-vf610/imx-regs.h | 1 +
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 12 +
arch/arm/include/asm/gic.h | 56 +
arch/arm/include/asm/system.h | 1 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/bootm.c | 4 +-
arch/arm/lib/gic_64.S | 194 +++
arch/arm/lib/relocate_64.S | 19 +
board/BuR/kwb/board.c | 4 +-
board/altera/socfpga/pll_config.h | 118 ++
board/denx/m53evk/m53evk.c | 31 +-
board/freescale/mx53loco/mx53loco.c | 31 +-
board/freescale/mx6sabresd/mx6sabresd.c | 11 +
board/freescale/vf610twr/vf610twr.c | 1 -
board/gateworks/gw_ventana/Makefile | 10 +
board/gateworks/gw_ventana/README | 55 +
board/gateworks/gw_ventana/clocks.cfg | 42 +
board/gateworks/gw_ventana/gsc.c | 129 ++
board/gateworks/gw_ventana/gsc.h | 64 +
board/gateworks/gw_ventana/gw_ventana.c | 1263
++++++++++++++++++++
board/gateworks/gw_ventana/gw_ventana.cfg | 44 +
board/gateworks/gw_ventana/ventana_eeprom.h | 106 ++
board/nvidia/dalmore/pinmux-config-dalmore.h | 16 +-
board/nvidia/venice2/pinmux-config-venice2.h | 16 +-
board/samsung/common/board.c | 180 +--
board/samsung/origen/origen.c | 112 +-
board/samsung/smdk5250/exynos5-dt.c | 15 -
board/samsung/smdk5250/smdk5250.c | 125 ++
board/samsung/smdk5420/smdk5420.c | 15 -
board/samsung/trats/trats.c | 213 +---
board/samsung/trats2/trats2.c | 233 +---
board/samsung/universal_c210/universal.c | 204 +---
board/siemens/dxr2/board.c | 26 +-
board/ti/am335x/u-boot.lds | 1 +
board/wandboard/wandboard.c | 4 +-
boards.cfg | 5 +
doc/device-tree-bindings/video/exynos_mipi_dsi.txt | 82 ++
drivers/dfu/dfu.c | 6 +-
drivers/misc/Makefile | 1 +
drivers/misc/mxs_ocotp.c | 311 +++++
drivers/mmc/s5p_sdhci.c | 129 ++
drivers/net/cpsw.c | 6 +-
drivers/pci/pcie_imx.c | 13 +-
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/pmic_pfuze100.c | 32 +
drivers/spi/omap3_spi.c | 5 +-
drivers/video/exynos_fb.c | 12 +
drivers/video/exynos_mipi_dsi.c | 96 ++
include/configs/am335x_evm.h | 2 +
include/configs/bur_am335x_common.h | 2 +-
include/configs/cm_t35.h | 2 +
include/configs/exynos4-dt.h | 138 +++
include/configs/gw_ventana.h | 425 +++++++
include/configs/m53evk.h | 8 +-
include/configs/mx25pdk.h | 103 +-
include/configs/mx53loco.h | 10 +-
include/configs/mx6_common.h | 2 +
include/configs/mx6qsabreauto.h | 3 +
include/configs/mx6sabresd.h | 10 +
include/configs/mxs.h | 15 +-
include/configs/nitrogen6x.h | 1 -
include/configs/origen.h | 110 +-
include/configs/s5pc210_universal.h | 152 +--
include/configs/socfpga_cyclone5.h | 1 +
include/configs/trats.h | 225 +---
include/configs/trats2.h | 220 +---
include/configs/vexpress_aemv8a.h | 7 +
include/configs/woodburn_sd.h | 2 -
include/fdtdec.h | 2 +
include/linux/fb.h | 2 +
include/mmc.h | 2 +
include/phy.h | 2 +
include/power/pfuze100_pmic.h | 96 ++
include/sdhci.h | 5 +
lib/fdtdec.c | 2 + 110 files
changed, 6015 insertions(+), 1635 deletions(-) create mode 100644
arch/arm/cpu/arm926ejs/mxs/mxsimage-signed.cfg create mode 100644
arch/arm/cpu/armv7/socfpga/clock_manager.c delete mode 100644
arch/arm/cpu/armv8/gic.S create mode 100644 arch/arm/dts/exynos4.dtsi
create mode 100644 arch/arm/dts/exynos4210-origen.dts
create mode 100644 arch/arm/dts/exynos4210-trats.dts
create mode 100644 arch/arm/dts/exynos4210-universal_c210.dts
create mode 100644 arch/arm/dts/exynos4412-trats2.dts
create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/include/asm/arch-socfpga/clock_manager.h
create mode 100644 arch/arm/lib/gic_64.S
create mode 100644 board/altera/socfpga/pll_config.h
create mode 100644 board/gateworks/gw_ventana/Makefile
create mode 100644 board/gateworks/gw_ventana/README
create mode 100644 board/gateworks/gw_ventana/clocks.cfg
create mode 100644 board/gateworks/gw_ventana/gsc.c
create mode 100644 board/gateworks/gw_ventana/gsc.h
create mode 100644 board/gateworks/gw_ventana/gw_ventana.c
create mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg
create mode 100644 board/gateworks/gw_ventana/ventana_eeprom.h
create mode 100644 doc/device-tree-bindings/video/exynos_mipi_dsi.txt
create mode 100644 drivers/misc/mxs_ocotp.c
create mode 100644 drivers/power/pmic/pmic_pfuze100.c
create mode 100644 include/configs/exynos4-dt.h
create mode 100644 include/configs/gw_ventana.h
create mode 100644 include/power/pfuze100_pmic.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-03-10 18:16 Albert ARIBAUD
@ 2014-03-10 21:27 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-03-10 21:27 UTC (permalink / raw)
To: u-boot
On Mon, Mar 10, 2014 at 07:16:44PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> eeb72e67619b98d2502fe634a3a5d9953de92ad0:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-02-26
> 16:49:58 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 27019e4a949fc3be2e895ac20839c4d4d119f902:
>
> arm: atmel: sama5d3: add nand spl boot support (2014-03-09 19:19:13
> +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>
> Andreas Henriksson (2):
> at91sam9263ek: add mmc support
> at91 gpio: fix typo in compatibility macro
>
> Bo Shen (4):
> ARM: atmel: add sama5d3 Xplained board support
> arm: atmel: sama5d3: add spi spl boot support
> mtd: nand: atmel: prepare for nand spl boot support
> arm: atmel: sama5d3: add nand spl boot support
>
> Dave Gerlach (3):
> ARM: AM43xx: EMIF: configure self-refresh entry delay
> ARM: AM43xx: Write sdram_config to secure_emif_sdram_config
> ARM: AM43xx: Change DDR3 Reset Value
>
> Enric Balletbo i Serra (1):
> OMAP3: igep00x0: Enable required clocks for GPIO that are used.
>
> Hannes Petermaier (1):
> board/BuR/common: fix phy addresses
>
> Lokesh Vutla (1):
> ARM: AM4372: Update EMIF registers for DDR3
>
> Mugunthan V N (6):
> drivers: net: cpsw: add support to have phy address from cpsw
> platform data ARM: AM43xx: clocks: Enable CPGMAC clock control
> ARM: AM43xx: Add CPSW support to AM43xx EPOS and GP EVM
> ARM: AM335x: add support for reading cpsw 2nd mac address from
> efuse ARM: DRA7xx: add support for reading cpsw 2nd mac from efuse
> ARM: AM43xx: Add Ethernet boot support to SPL
>
> Stefan Roese (1):
> arm: am335x: DXR2: Reset SMSC LAN9303 switch via GPIO upon bootup
>
> Stephen Warren (8):
> ARM: tegra: move CONFIG_TEGRAnn
> ARM: tegra: fix pmc_pwrgate_timer_mult register definition
> ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124
> ARM: tegra: simplify halt_avp()
> ARM: tegra: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
> ARM: tegra: convert tegra to use distro defaults
> ARM: tegra: rework boot scripts
> ARM: tegra: implement bootcmd_pxe
>
> arch/arm/cpu/arm720t/tegra-common/cpu.c | 5 ++-
> arch/arm/cpu/arm720t/tegra124/cpu.c | 4 +--
> arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 25 ++++++++++++++
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 1 +
> arch/arm/cpu/armv7/am33xx/ddr.c | 5 +--
> arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
> arch/arm/cpu/at91-common/spl.c | 4 +++
> arch/arm/include/asm/arch-at91/gpio.h | 2 +-
> arch/arm/include/asm/arch-at91/spl.h | 4 +++
> arch/arm/include/asm/arch-tegra/pmc.h | 11 +++++++
> arch/arm/include/asm/arch-tegra/tegra.h | 5 +++
> arch/arm/include/asm/arch-tegra114/tegra.h | 2 ++
> arch/arm/include/asm/arch-tegra124/tegra.h | 2 ++
> arch/arm/include/asm/arch-tegra20/tegra.h | 2 ++
> arch/arm/include/asm/arch-tegra30/tegra.h | 2 ++
> board/BuR/common/common.c | 4 +--
> board/atmel/at91sam9263ek/at91sam9263ek.c | 10 ++++++
> board/atmel/sama5d3_xplained/Makefile | 15 +++++++++
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/atmel/sama5d3xek/sama5d3xek.c | 4 +++
> board/compulab/cm_t335/cm_t335.c | 2 +-
> board/isee/igep0033/board.c | 2 +-
> board/phytec/pcm051/board.c | 4 +--
> board/siemens/dxr2/board.c | 9 ++++-
> board/siemens/dxr2/mux.c | 2 ++
> board/siemens/pxm2/board.c | 4 +--
> board/siemens/rut/board.c | 4 +--
> board/silica/pengwyn/board.c | 4 +--
> board/ti/am335x/board.c | 19 +++++++++--
> board/ti/am43xx/board.c | 100
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> board/ti/am43xx/mux.c | 44
> +++++++++++++++++++++++--
> board/ti/dra7xx/evm.c | 19 +++++++++--
> board/ti/ti814x/evm.c | 4 +--
> boards.cfg | 2 ++
> drivers/mtd/nand/atmel_nand.c | 208
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/cpsw.c | 4 +--
> include/configs/am335x_evm.h | 1 -
> include/configs/am335x_igep0033.h | 1 -
> include/configs/am43xx_evm.h | 26
> +++++++++++++++ include/configs/at91sam9263ek.h |
> 13 ++++++++ include/configs/bur_am335x_common.h | 1 -
> include/configs/cm_t335.h | 1 -
> include/configs/dra7xx_evm.h | 1 -
> include/configs/dxr2.h | 2 +-
> include/configs/omap3_igep00x0.h | 5 +++
> include/configs/pcm051.h | 1 -
> include/configs/pengwyn.h | 1 -
> include/configs/pxm2.h | 1 -
> include/configs/rut.h | 1 -
> include/configs/sama5d3_xplained.h | 203
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/sama5d3xek.h | 23 +++++++++++++
> include/configs/tegra-common-post.h | 57
> ++++++++++++++++++++++++++------
> include/configs/tegra-common.h | 20 +++--------
> include/configs/tegra114-common.h | 10 +++---
> include/configs/tegra124-common.h | 6 +---
> include/configs/tegra20-common.h | 10 +++---
> include/configs/tegra30-common.h | 10 +++---
> include/configs/ti814x_evm.h | 1 -
> include/configs/ti_am335x_common.h | 1 +
> include/cpsw.h | 2 +-
> include/nand.h | 6 ++++ 61 files
> changed, 983 insertions(+), 91 deletions(-) create mode 100644
> board/atmel/sama5d3_xplained/Makefile create mode 100644
> board/atmel/sama5d3_xplained/sama5d3_xplained.c create mode 100644
> include/configs/sama5d3_xplained.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140310/4dda2324/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-03-10 18:16 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
eeb72e67619b98d2502fe634a3a5d9953de92ad0:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-02-26
16:49:58 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 27019e4a949fc3be2e895ac20839c4d4d119f902:
arm: atmel: sama5d3: add nand spl boot support (2014-03-09 19:19:13
+0100)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Andreas Henriksson (2):
at91sam9263ek: add mmc support
at91 gpio: fix typo in compatibility macro
Bo Shen (4):
ARM: atmel: add sama5d3 Xplained board support
arm: atmel: sama5d3: add spi spl boot support
mtd: nand: atmel: prepare for nand spl boot support
arm: atmel: sama5d3: add nand spl boot support
Dave Gerlach (3):
ARM: AM43xx: EMIF: configure self-refresh entry delay
ARM: AM43xx: Write sdram_config to secure_emif_sdram_config
ARM: AM43xx: Change DDR3 Reset Value
Enric Balletbo i Serra (1):
OMAP3: igep00x0: Enable required clocks for GPIO that are used.
Hannes Petermaier (1):
board/BuR/common: fix phy addresses
Lokesh Vutla (1):
ARM: AM4372: Update EMIF registers for DDR3
Mugunthan V N (6):
drivers: net: cpsw: add support to have phy address from cpsw
platform data ARM: AM43xx: clocks: Enable CPGMAC clock control
ARM: AM43xx: Add CPSW support to AM43xx EPOS and GP EVM
ARM: AM335x: add support for reading cpsw 2nd mac address from
efuse ARM: DRA7xx: add support for reading cpsw 2nd mac from efuse
ARM: AM43xx: Add Ethernet boot support to SPL
Stefan Roese (1):
arm: am335x: DXR2: Reset SMSC LAN9303 switch via GPIO upon bootup
Stephen Warren (8):
ARM: tegra: move CONFIG_TEGRAnn
ARM: tegra: fix pmc_pwrgate_timer_mult register definition
ARM: tegra: fix NV_PA_CSITE_BASE for Tegra124
ARM: tegra: simplify halt_avp()
ARM: tegra: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
ARM: tegra: convert tegra to use distro defaults
ARM: tegra: rework boot scripts
ARM: tegra: implement bootcmd_pxe
arch/arm/cpu/arm720t/tegra-common/cpu.c | 5 ++-
arch/arm/cpu/arm720t/tegra124/cpu.c | 4 +--
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 25 ++++++++++++++
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 1 +
arch/arm/cpu/armv7/am33xx/ddr.c | 5 +--
arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
arch/arm/cpu/at91-common/spl.c | 4 +++
arch/arm/include/asm/arch-at91/gpio.h | 2 +-
arch/arm/include/asm/arch-at91/spl.h | 4 +++
arch/arm/include/asm/arch-tegra/pmc.h | 11 +++++++
arch/arm/include/asm/arch-tegra/tegra.h | 5 +++
arch/arm/include/asm/arch-tegra114/tegra.h | 2 ++
arch/arm/include/asm/arch-tegra124/tegra.h | 2 ++
arch/arm/include/asm/arch-tegra20/tegra.h | 2 ++
arch/arm/include/asm/arch-tegra30/tegra.h | 2 ++
board/BuR/common/common.c | 4 +--
board/atmel/at91sam9263ek/at91sam9263ek.c | 10 ++++++
board/atmel/sama5d3_xplained/Makefile | 15 +++++++++
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/atmel/sama5d3xek/sama5d3xek.c | 4 +++
board/compulab/cm_t335/cm_t335.c | 2 +-
board/isee/igep0033/board.c | 2 +-
board/phytec/pcm051/board.c | 4 +--
board/siemens/dxr2/board.c | 9 ++++-
board/siemens/dxr2/mux.c | 2 ++
board/siemens/pxm2/board.c | 4 +--
board/siemens/rut/board.c | 4 +--
board/silica/pengwyn/board.c | 4 +--
board/ti/am335x/board.c | 19 +++++++++--
board/ti/am43xx/board.c | 100
++++++++++++++++++++++++++++++++++++++++++++++++++++++-
board/ti/am43xx/mux.c | 44
+++++++++++++++++++++++--
board/ti/dra7xx/evm.c | 19 +++++++++--
board/ti/ti814x/evm.c | 4 +--
boards.cfg | 2 ++
drivers/mtd/nand/atmel_nand.c | 208
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/cpsw.c | 4 +--
include/configs/am335x_evm.h | 1 -
include/configs/am335x_igep0033.h | 1 -
include/configs/am43xx_evm.h | 26
+++++++++++++++ include/configs/at91sam9263ek.h |
13 ++++++++ include/configs/bur_am335x_common.h | 1 -
include/configs/cm_t335.h | 1 -
include/configs/dra7xx_evm.h | 1 -
include/configs/dxr2.h | 2 +-
include/configs/omap3_igep00x0.h | 5 +++
include/configs/pcm051.h | 1 -
include/configs/pengwyn.h | 1 -
include/configs/pxm2.h | 1 -
include/configs/rut.h | 1 -
include/configs/sama5d3_xplained.h | 203
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/sama5d3xek.h | 23 +++++++++++++
include/configs/tegra-common-post.h | 57
++++++++++++++++++++++++++------
include/configs/tegra-common.h | 20 +++--------
include/configs/tegra114-common.h | 10 +++---
include/configs/tegra124-common.h | 6 +---
include/configs/tegra20-common.h | 10 +++---
include/configs/tegra30-common.h | 10 +++---
include/configs/ti814x_evm.h | 1 -
include/configs/ti_am335x_common.h | 1 +
include/cpsw.h | 2 +-
include/nand.h | 6 ++++ 61 files
changed, 983 insertions(+), 91 deletions(-) create mode 100644
board/atmel/sama5d3_xplained/Makefile create mode 100644
board/atmel/sama5d3_xplained/sama5d3_xplained.c create mode 100644
include/configs/sama5d3_xplained.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-02-26 21:40 Albert ARIBAUD
@ 2014-02-26 23:39 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-02-26 23:39 UTC (permalink / raw)
To: u-boot
On Wed, Feb 26, 2014 at 10:40:13PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 3e11350255d9c5d4bd03c2a65769da84c05d3294:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2014-02-20
> 13:16:05 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 1551df35f296f0a8df32f4f2054254f46e8be252:
>
> arm: Switch to -mno-unaligned-access when supported by the compiler
> (2014-02-26 21:19:32 +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (4):
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> cm_t335: fix linker file to produce full ELF
> arm: make _end compiler-generated
> arm: remove unneeded symbol offsets and _TEXT_BASE
>
> Darwin Rambo (6):
> arch: kona: Initial commit of kona-common architecture code
> arch: bcm281xx: Initial commit of bcm281xx architecture code
> gpio: kona: Add Kona gpio driver
> i2c: kona: Add Kona I2C driver
> mmc: kona: Add Kona mmc driver
> board: bcm28155_ap: Add board files
>
> Dave Gerlach (1):
> ARM: AM43xx: GP-EVM: Correct GPIO used for VTT regulator control
>
> Hannes Petermaier (2):
> board: Add support for B&R T-Series Motherboard
> Add support for B&R KWB Motherboard
>
> Janne Grunau (1):
> ARM: OMAP4: fix DDR timings for OMAP4430 ES2.0
>
> Lothar Felten (1):
> am335x: Initial support for Silica Pengwyn board
>
> M?ns Rullg?rd (1):
> ti814x: Fix illegal use of FP ops in clock_ti814x.c
>
> Nishanth Menon (2):
> DRA7: fix ABB efuse offset for OPP_NOM
> omap4_common: config: remove I2C for SPL mode
>
> Stefan Roese (2):
> arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not
> enabled) arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT
> Linux booting
>
> Stefano Babic (3):
> OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
> omap3: fix pinmux for mcx board
> OMAP3: fix default environment for mcx board
>
> Stephen Warren (4):
> pxe: allow compilation when !defined(CONFIG_CMD_NET)
> ARM: rpi_b: convert to use distro defaults
> ARM: rpi_b: load /uEnv.txt from MMC at startup
> ARM: rpi_b: rework boot scripts, enable sysboot
>
> Tom Rini (5):
> am335x_evm: Enable GPT commands
> am43xx_evm: Enable GPT commands
> dra7xx_evm: Enable GPT commands
> checkpatch.pl: Add warning for new __packed additions
> arm: Switch to -mno-unaligned-access when supported by the
> compiler
>
> README | 8 +-
> arch/arm/cpu/arm1136/start.S | 27 -----
> arch/arm/cpu/arm1136/u-boot-spl.lds | 6 +-
> arch/arm/cpu/arm1176/start.S | 27 -----
> arch/arm/cpu/arm720t/start.S | 26 -----
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 5 +-
> arch/arm/cpu/arm920t/start.S | 26 -----
> arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 14 +--
> arch/arm/cpu/arm926ejs/mxs/start.S | 27 -----
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 9 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 9 +-
> arch/arm/cpu/arm926ejs/start.S | 27 -----
> arch/arm/cpu/arm946es/start.S | 26 -----
> arch/arm/cpu/arm_intcm/start.S | 26 -----
> arch/arm/cpu/armv7/Makefile | 1 +
> arch/arm/cpu/armv7/am33xx/board.c | 6 +-
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 2 +
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 5 +-
> arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 6 +-
> arch/arm/cpu/armv7/bcm281xx/Makefile | 11 ++
> arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c | 523
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/bcm281xx/clk-bsc.c | 52 +++++++++
> arch/arm/cpu/armv7/bcm281xx/clk-core.c | 513
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/bcm281xx/clk-core.h | 495
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/bcm281xx/clk-sdio.c | 73 ++++++++++++
> arch/arm/cpu/armv7/bcm281xx/reset.c | 27 +++++
> arch/arm/cpu/armv7/config.mk | 7 +-
> arch/arm/cpu/armv7/kona-common/Makefile | 9 ++
> arch/arm/cpu/armv7/kona-common/clk-stubs.c | 21 ++++
> arch/arm/cpu/armv7/kona-common/hwinit-common.c | 16 +++
> arch/arm/cpu/armv7/kona-common/s_init.c | 12 ++
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 6 +-
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 3 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 18 +++
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +-
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 6 +-
> arch/arm/cpu/armv7/start.S | 23 ----
> arch/arm/cpu/armv7/zynq/u-boot.lds | 7 +-
> arch/arm/cpu/armv8/config.mk | 5 +-
> arch/arm/cpu/at91-common/u-boot-spl.lds | 6 +-
> arch/arm/cpu/pxa/start.S | 27 -----
> arch/arm/cpu/sa1100/start.S | 26 -----
> arch/arm/cpu/u-boot-spl.lds | 9 +-
> arch/arm/cpu/u-boot.lds | 9 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 12 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 16 +++
> arch/arm/include/asm/arch-am33xx/gpio.h | 4 +-
> arch/arm/include/asm/arch-bcm281xx/gpio.h | 15 +++
> arch/arm/include/asm/arch-bcm281xx/sysmap.h | 25 +++++
> arch/arm/include/asm/kona-common/clk.h | 29 +++++
> arch/arm/include/asm/kona-common/kona_sdhci.h | 12 ++
> arch/arm/lib/Makefile | 2 +-
> arch/arm/lib/board.c | 12 +-
> arch/arm/lib/interrupts.c | 2 +-
> arch/arm/lib/sections.c | 1 +
> board/Barix/ipam390/u-boot-spl-ipam390.lds | 6 +-
> board/BuR/common/bur_common.h | 22 ++++
> board/BuR/common/common.c | 216
> +++++++++++++++++++++++++++++++++++
> board/BuR/kwb/Makefile | 12 ++
> board/BuR/kwb/board.c | 240
> +++++++++++++++++++++++++++++++++++++++
> board/BuR/kwb/mux.c | 195
> ++++++++++++++++++++++++++++++++
> board/BuR/tseries/Makefile | 14 +++
> board/BuR/tseries/board.c | 147
> ++++++++++++++++++++++++
> board/BuR/tseries/mux.c | 225
> +++++++++++++++++++++++++++++++++++++
> board/ait/cam_enc_4xx/u-boot-spl.lds | 6 +-
> board/armltd/integrator/lowlevel_init.S | 2 +-
> board/broadcom/bcm28155_ap/Makefile | 7 ++
> board/broadcom/bcm28155_ap/bcm28155_ap.c | 87 ++++++++++++++
> board/cm4008/flash.c | 2 +-
> board/cm41xx/flash.c | 2 +-
> board/compulab/cm_t335/u-boot.lds | 23 ++--
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 6 +-
> board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 +-
> board/freescale/mx31ads/u-boot.lds | 9 +-
> board/htkw/mcx/mcx.h | 2 -
> board/mpl/vcma9/lowlevel_init.S | 5 +-
> board/samsung/common/exynos-uboot-spl.lds | 6 +-
> board/samsung/goni/lowlevel_init.S | 3 -
> board/samsung/smdk2410/lowlevel_init.S | 5 +-
> board/samsung/smdkc100/lowlevel_init.S | 3 -
> board/silica/pengwyn/Makefile | 13 +++
> board/silica/pengwyn/board.c | 207
> ++++++++++++++++++++++++++++++++++
> board/silica/pengwyn/board.h | 15 +++
> board/silica/pengwyn/mux.c | 98 ++++++++++++++++
> board/ti/am335x/u-boot.lds | 9 +-
> board/ti/am43xx/board.c | 16 +--
> board/ti/am43xx/mux.c | 6 +-
> board/ti/omap5912osk/lowlevel_init.S | 4 -
> board/vpac270/u-boot-spl.lds | 9 +-
> boards.cfg | 6 +
> common/Makefile | 2 -
> common/board_f.c | 14 +--
> common/board_r.c | 4 +-
> common/cmd_pxe.c | 11 ++
> doc/README.arm-unaligned-accesses | 122
> -------------------- doc/README.unaligned-memory-access.txt |
> 240 +++++++++++++++++++++++++++++++++++++++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/kona_gpio.c | 141
> +++++++++++++++++++++++ drivers/i2c/Makefile
> | 1 + drivers/i2c/kona_i2c.c | 730
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/kona_sdhci.c | 134
> ++++++++++++++++++++++ fs/ubifs/Makefile
> | 3 - include/asm-generic/sections.h | 26 ++---
> include/bitfield.h | 58 ++++++++++
> include/configs/am335x_evm.h | 13 +++
> include/configs/am43xx_evm.h | 9 ++
> include/configs/bcm28155_ap.h | 140
> +++++++++++++++++++++++ include/configs/bur_am335x_common.h
> | 197 ++++++++++++++++++++++++++++++++
> include/configs/cm_t35.h | 7 --
> include/configs/dra7xx_evm.h | 11 ++
> include/configs/kwb.h | 128
> +++++++++++++++++++++ include/configs/mcx.h
> | 9 +- include/configs/pengwyn.h | 208
> ++++++++++++++++++++++++++++++++++
> include/configs/rpi_b.h | 119
> +++++++++++++++----- include/configs/tao3530.h
> | 7 ++ include/configs/ti_am335x_common.h | 1 -
> include/configs/ti_omap4_common.h | 6 +
> include/configs/tseries.h | 265
> +++++++++++++++++++++++++++++++++++++++++++
> lib/Makefile | 3 -
> scripts/checkpatch.pl | 5 + 121 files
> changed, 5960 insertions(+), 608 deletions(-) create mode 100644
> arch/arm/cpu/armv7/bcm281xx/Makefile create mode 100644
> arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c create mode 100644
> arch/arm/cpu/armv7/bcm281xx/clk-bsc.c create mode 100644
> arch/arm/cpu/armv7/bcm281xx/clk-core.c create mode 100644
> arch/arm/cpu/armv7/bcm281xx/clk-core.h create mode 100644
> arch/arm/cpu/armv7/bcm281xx/clk-sdio.c create mode 100644
> arch/arm/cpu/armv7/bcm281xx/reset.c create mode 100644
> arch/arm/cpu/armv7/kona-common/Makefile create mode 100644
> arch/arm/cpu/armv7/kona-common/clk-stubs.c create mode 100644
> arch/arm/cpu/armv7/kona-common/hwinit-common.c create mode 100644
> arch/arm/cpu/armv7/kona-common/s_init.c create mode 100644
> arch/arm/include/asm/arch-bcm281xx/gpio.h create mode 100644
> arch/arm/include/asm/arch-bcm281xx/sysmap.h create mode 100644
> arch/arm/include/asm/kona-common/clk.h create mode 100644
> arch/arm/include/asm/kona-common/kona_sdhci.h create mode 100644
> board/BuR/common/bur_common.h create mode 100644
> board/BuR/common/common.c create mode 100644 board/BuR/kwb/Makefile
> create mode 100644 board/BuR/kwb/board.c create mode 100644
> board/BuR/kwb/mux.c create mode 100644 board/BuR/tseries/Makefile
> create mode 100644 board/BuR/tseries/board.c create mode 100644
> board/BuR/tseries/mux.c create mode 100644
> board/broadcom/bcm28155_ap/Makefile create mode 100644
> board/broadcom/bcm28155_ap/bcm28155_ap.c create mode 100644
> board/silica/pengwyn/Makefile create mode 100644
> board/silica/pengwyn/board.c create mode 100644
> board/silica/pengwyn/board.h create mode 100644
> board/silica/pengwyn/mux.c delete mode 100644
> doc/README.arm-unaligned-accesses create mode 100644
> doc/README.unaligned-memory-access.txt create mode 100644
> drivers/gpio/kona_gpio.c create mode 100644 drivers/i2c/kona_i2c.c
> create mode 100644 drivers/mmc/kona_sdhci.c create mode 100644
> include/bitfield.h create mode 100644 include/configs/bcm28155_ap.h
> create mode 100644 include/configs/bur_am335x_common.h create mode
> 100644 include/configs/kwb.h create mode 100644
> include/configs/pengwyn.h create mode 100644 include/configs/tseries.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140226/0c293535/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-02-26 21:40 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
3e11350255d9c5d4bd03c2a65769da84c05d3294:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2014-02-20
13:16:05 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 1551df35f296f0a8df32f4f2054254f46e8be252:
arm: Switch to -mno-unaligned-access when supported by the compiler
(2014-02-26 21:19:32 +0100)
----------------------------------------------------------------
Albert ARIBAUD (4):
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
cm_t335: fix linker file to produce full ELF
arm: make _end compiler-generated
arm: remove unneeded symbol offsets and _TEXT_BASE
Darwin Rambo (6):
arch: kona: Initial commit of kona-common architecture code
arch: bcm281xx: Initial commit of bcm281xx architecture code
gpio: kona: Add Kona gpio driver
i2c: kona: Add Kona I2C driver
mmc: kona: Add Kona mmc driver
board: bcm28155_ap: Add board files
Dave Gerlach (1):
ARM: AM43xx: GP-EVM: Correct GPIO used for VTT regulator control
Hannes Petermaier (2):
board: Add support for B&R T-Series Motherboard
Add support for B&R KWB Motherboard
Janne Grunau (1):
ARM: OMAP4: fix DDR timings for OMAP4430 ES2.0
Lothar Felten (1):
am335x: Initial support for Silica Pengwyn board
M?ns Rullg?rd (1):
ti814x: Fix illegal use of FP ops in clock_ti814x.c
Nishanth Menon (2):
DRA7: fix ABB efuse offset for OPP_NOM
omap4_common: config: remove I2C for SPL mode
Stefan Roese (2):
arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not
enabled) arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT
Linux booting
Stefano Babic (3):
OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
omap3: fix pinmux for mcx board
OMAP3: fix default environment for mcx board
Stephen Warren (4):
pxe: allow compilation when !defined(CONFIG_CMD_NET)
ARM: rpi_b: convert to use distro defaults
ARM: rpi_b: load /uEnv.txt from MMC at startup
ARM: rpi_b: rework boot scripts, enable sysboot
Tom Rini (5):
am335x_evm: Enable GPT commands
am43xx_evm: Enable GPT commands
dra7xx_evm: Enable GPT commands
checkpatch.pl: Add warning for new __packed additions
arm: Switch to -mno-unaligned-access when supported by the
compiler
README | 8 +-
arch/arm/cpu/arm1136/start.S | 27 -----
arch/arm/cpu/arm1136/u-boot-spl.lds | 6 +-
arch/arm/cpu/arm1176/start.S | 27 -----
arch/arm/cpu/arm720t/start.S | 26 -----
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 5 +-
arch/arm/cpu/arm920t/start.S | 26 -----
arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 14 +--
arch/arm/cpu/arm926ejs/mxs/start.S | 27 -----
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 9 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 9 +-
arch/arm/cpu/arm926ejs/start.S | 27 -----
arch/arm/cpu/arm946es/start.S | 26 -----
arch/arm/cpu/arm_intcm/start.S | 26 -----
arch/arm/cpu/armv7/Makefile | 1 +
arch/arm/cpu/armv7/am33xx/board.c | 6 +-
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 2 +
arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 5 +-
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 6 +-
arch/arm/cpu/armv7/bcm281xx/Makefile | 11 ++
arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c | 523
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/bcm281xx/clk-bsc.c | 52 +++++++++
arch/arm/cpu/armv7/bcm281xx/clk-core.c | 513
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/bcm281xx/clk-core.h | 495
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/bcm281xx/clk-sdio.c | 73 ++++++++++++
arch/arm/cpu/armv7/bcm281xx/reset.c | 27 +++++
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/kona-common/Makefile | 9 ++
arch/arm/cpu/armv7/kona-common/clk-stubs.c | 21 ++++
arch/arm/cpu/armv7/kona-common/hwinit-common.c | 16 +++
arch/arm/cpu/armv7/kona-common/s_init.c | 12 ++
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 6 +-
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 3 -
arch/arm/cpu/armv7/omap4/hw_data.c | 18 +++
arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +-
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 6 +-
arch/arm/cpu/armv7/start.S | 23 ----
arch/arm/cpu/armv7/zynq/u-boot.lds | 7 +-
arch/arm/cpu/armv8/config.mk | 5 +-
arch/arm/cpu/at91-common/u-boot-spl.lds | 6 +-
arch/arm/cpu/pxa/start.S | 27 -----
arch/arm/cpu/sa1100/start.S | 26 -----
arch/arm/cpu/u-boot-spl.lds | 9 +-
arch/arm/cpu/u-boot.lds | 9 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 12 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 16 +++
arch/arm/include/asm/arch-am33xx/gpio.h | 4 +-
arch/arm/include/asm/arch-bcm281xx/gpio.h | 15 +++
arch/arm/include/asm/arch-bcm281xx/sysmap.h | 25 +++++
arch/arm/include/asm/kona-common/clk.h | 29 +++++
arch/arm/include/asm/kona-common/kona_sdhci.h | 12 ++
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/board.c | 12 +-
arch/arm/lib/interrupts.c | 2 +-
arch/arm/lib/sections.c | 1 +
board/Barix/ipam390/u-boot-spl-ipam390.lds | 6 +-
board/BuR/common/bur_common.h | 22 ++++
board/BuR/common/common.c | 216
+++++++++++++++++++++++++++++++++++
board/BuR/kwb/Makefile | 12 ++
board/BuR/kwb/board.c | 240
+++++++++++++++++++++++++++++++++++++++
board/BuR/kwb/mux.c | 195
++++++++++++++++++++++++++++++++
board/BuR/tseries/Makefile | 14 +++
board/BuR/tseries/board.c | 147
++++++++++++++++++++++++
board/BuR/tseries/mux.c | 225
+++++++++++++++++++++++++++++++++++++
board/ait/cam_enc_4xx/u-boot-spl.lds | 6 +-
board/armltd/integrator/lowlevel_init.S | 2 +-
board/broadcom/bcm28155_ap/Makefile | 7 ++
board/broadcom/bcm28155_ap/bcm28155_ap.c | 87 ++++++++++++++
board/cm4008/flash.c | 2 +-
board/cm41xx/flash.c | 2 +-
board/compulab/cm_t335/u-boot.lds | 23 ++--
board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 6 +-
board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 +-
board/freescale/mx31ads/u-boot.lds | 9 +-
board/htkw/mcx/mcx.h | 2 -
board/mpl/vcma9/lowlevel_init.S | 5 +-
board/samsung/common/exynos-uboot-spl.lds | 6 +-
board/samsung/goni/lowlevel_init.S | 3 -
board/samsung/smdk2410/lowlevel_init.S | 5 +-
board/samsung/smdkc100/lowlevel_init.S | 3 -
board/silica/pengwyn/Makefile | 13 +++
board/silica/pengwyn/board.c | 207
++++++++++++++++++++++++++++++++++
board/silica/pengwyn/board.h | 15 +++
board/silica/pengwyn/mux.c | 98 ++++++++++++++++
board/ti/am335x/u-boot.lds | 9 +-
board/ti/am43xx/board.c | 16 +--
board/ti/am43xx/mux.c | 6 +-
board/ti/omap5912osk/lowlevel_init.S | 4 -
board/vpac270/u-boot-spl.lds | 9 +-
boards.cfg | 6 +
common/Makefile | 2 -
common/board_f.c | 14 +--
common/board_r.c | 4 +-
common/cmd_pxe.c | 11 ++
doc/README.arm-unaligned-accesses | 122
-------------------- doc/README.unaligned-memory-access.txt |
240 +++++++++++++++++++++++++++++++++++++++
drivers/gpio/Makefile | 1 +
drivers/gpio/kona_gpio.c | 141
+++++++++++++++++++++++ drivers/i2c/Makefile
| 1 + drivers/i2c/kona_i2c.c | 730
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/Makefile | 1 +
drivers/mmc/kona_sdhci.c | 134
++++++++++++++++++++++ fs/ubifs/Makefile
| 3 - include/asm-generic/sections.h | 26 ++---
include/bitfield.h | 58 ++++++++++
include/configs/am335x_evm.h | 13 +++
include/configs/am43xx_evm.h | 9 ++
include/configs/bcm28155_ap.h | 140
+++++++++++++++++++++++ include/configs/bur_am335x_common.h
| 197 ++++++++++++++++++++++++++++++++
include/configs/cm_t35.h | 7 --
include/configs/dra7xx_evm.h | 11 ++
include/configs/kwb.h | 128
+++++++++++++++++++++ include/configs/mcx.h
| 9 +- include/configs/pengwyn.h | 208
++++++++++++++++++++++++++++++++++
include/configs/rpi_b.h | 119
+++++++++++++++----- include/configs/tao3530.h
| 7 ++ include/configs/ti_am335x_common.h | 1 -
include/configs/ti_omap4_common.h | 6 +
include/configs/tseries.h | 265
+++++++++++++++++++++++++++++++++++++++++++
lib/Makefile | 3 -
scripts/checkpatch.pl | 5 + 121 files
changed, 5960 insertions(+), 608 deletions(-) create mode 100644
arch/arm/cpu/armv7/bcm281xx/Makefile create mode 100644
arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c create mode 100644
arch/arm/cpu/armv7/bcm281xx/clk-bsc.c create mode 100644
arch/arm/cpu/armv7/bcm281xx/clk-core.c create mode 100644
arch/arm/cpu/armv7/bcm281xx/clk-core.h create mode 100644
arch/arm/cpu/armv7/bcm281xx/clk-sdio.c create mode 100644
arch/arm/cpu/armv7/bcm281xx/reset.c create mode 100644
arch/arm/cpu/armv7/kona-common/Makefile create mode 100644
arch/arm/cpu/armv7/kona-common/clk-stubs.c create mode 100644
arch/arm/cpu/armv7/kona-common/hwinit-common.c create mode 100644
arch/arm/cpu/armv7/kona-common/s_init.c create mode 100644
arch/arm/include/asm/arch-bcm281xx/gpio.h create mode 100644
arch/arm/include/asm/arch-bcm281xx/sysmap.h create mode 100644
arch/arm/include/asm/kona-common/clk.h create mode 100644
arch/arm/include/asm/kona-common/kona_sdhci.h create mode 100644
board/BuR/common/bur_common.h create mode 100644
board/BuR/common/common.c create mode 100644 board/BuR/kwb/Makefile
create mode 100644 board/BuR/kwb/board.c create mode 100644
board/BuR/kwb/mux.c create mode 100644 board/BuR/tseries/Makefile
create mode 100644 board/BuR/tseries/board.c create mode 100644
board/BuR/tseries/mux.c create mode 100644
board/broadcom/bcm28155_ap/Makefile create mode 100644
board/broadcom/bcm28155_ap/bcm28155_ap.c create mode 100644
board/silica/pengwyn/Makefile create mode 100644
board/silica/pengwyn/board.c create mode 100644
board/silica/pengwyn/board.h create mode 100644
board/silica/pengwyn/mux.c delete mode 100644
doc/README.arm-unaligned-accesses create mode 100644
doc/README.unaligned-memory-access.txt create mode 100644
drivers/gpio/kona_gpio.c create mode 100644 drivers/i2c/kona_i2c.c
create mode 100644 drivers/mmc/kona_sdhci.c create mode 100644
include/bitfield.h create mode 100644 include/configs/bcm28155_ap.h
create mode 100644 include/configs/bur_am335x_common.h create mode
100644 include/configs/kwb.h create mode 100644
include/configs/pengwyn.h create mode 100644 include/configs/tseries.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
@ 2014-02-18 18:47 ` Albert ARIBAUD
1 sibling, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2014-02-18 18:47 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Tue, 18 Feb 2014 12:50:40 -0500, Tom Rini <trini@ti.com> wrote:
> On Thu, Feb 13, 2014 at 06:43:41PM +0100, Albert ARIBAUD wrote:
>
> > Hi Tom,
> >
> > The following changes since commit
> > 0876703cf2ee107372b56037d4eeeb7604c56796:
> >
> > boards.cfg: Keep the entries sorted (2014-01-27 08:28:35 -0500)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to 9c134e189a95c976dab94d4f28444a5398627188:
> >
> > arm/km: introduce kmsugp1 target (2014-02-13 17:45:36 +0100)
> >
> > ----------------------------------------------------------------
> > Albert ARIBAUD (3):
> > Merge branch 'u-boot-arm/next' into 'u-boot-arm/master'
> > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> > Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> >
> > Enric Balletb? i Serra (7):
> > ARM: OMAP4: Rename to ti_omap4_common.h
> > ARM: OMAP5: Rename to ti_omap5_common.h
> > TI: armv7: Move ELM support to SoC configuration file.
> > TI: armv7: Do not define the number DRAM banks if is already
> > defined. ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
> > TI: OMAP3: Create common config files for TI OMAP3 platforms.
> > OMAP3: igep00x0: Convert to ti_omap3_common.h.
> >
> > Gerlando Falauto (3):
> > arm/km: enable FDT for km_kirwkood
> > arm/km: define fdt_high env variable and allow backwards
> > compatibility arm/km: introduce kmsugp1 target
> >
> > Holger Brunck (5):
> > arm/km: drop unneeded define
> > arm/km: make local function startup_allowed static
> > arm/km/suv31: switch to 256MB RAM
> > arm/km: add CONFIG_KM_BOARD_EXTRA_ENV to default environment
> > arm/km: fix wrong error handling
> >
> > Inha Song (3):
> > serial: s5p: set automatically clears after resetting Rx FIFO
> > exynos: clock: fixed that cfg is set to wrong value.
> > exynos: clock: use the clear and set bits macros.
> >
> > Jassi Brar (2):
> > ARM: OMAP4/5: Remove dead code against
> > CONFIG_SYS_CLOCKS_ENABLE_ALL ARM: OMAP4/5: Remove dead code against
> > CONFIG_SYS_ENABLE_PADS_ALL
> >
> > Jim Lin (1):
> > ARM: tegra: fix "bootp" issue for Tegra124 too
> >
> > Jimmy Zhang (1):
> > ARM: tegra: don't exceed AVP limits when configuring PLLP
> >
> > Linus Walleij (2):
> > ARM: versatile: pass correct machine type for Versatile AB
> > ARM: versatile: pass console setting to the kernel
> >
> > Lokesh Vutla (1):
> > ARM: AM43xx: Enable DDR dynamic IO power down for DDR3
> >
> > Masahiro Yamada (1):
> > relocate-rela: replace a magic number with sizeof(Elf64_Rela)
> >
> > Michal Simek (2):
> > zynq: Use full tftpboot command instead of shortcut tftp
> > zynq: Fix elf header generation
> >
> > Minkyu Kang (3):
> > exynos: pinmux: sort the list of peripherals
> > exynos: pinmux: remove unnecessary define
> > exynos: pinmux: remove unnecessary routine
> >
> > Nishanth Menon (2):
> > DRA7: Add support for ES1.1 silicon ID code
> > DRA7: add ABB setup for MPU voltage domain
> >
> > Piotr Wilczek (8):
> > arm:exynos: add cpu revision
> > arm:s5pc110: add cpu revision
> > board:samsung:common: set envs with board unified information
> > board:samsung:goni: add env variables describing platform
> > board:samsung:universal: add env variables describing platform
> > board:samsung:trats: add env variables describing platform
> > board:samsung:trats2: add env variables describing platform
> > board:samsung:trats/trats2: enable boot with appended and
> > separated DTB
> >
> > Przemyslaw Marczak (12):
> > s5p: gpio: change gpio coding method for s5p gpio.
> > trats2: Code cleanup.
> > samsung: common: Add file for common functions, draw_logo()
> > cleanup. common: lcd.c: fix data abort exception when try to access bmp
> > header lib: tizen: change Tizen logo with the new one.
> > video: exynos: fimd: add support for various display color modes
> > samsung: boards: update display configs with 16bpp mode.
> > samsung: misc: Add LCD download menu.
> > trats: add LCD download menu support
> > trats2: add LCD download menu support
> > universal: add LCD download menu support
> > config: trats: trats2: extend dfu_alt_info by env update settings
> >
> > Satyanarayana, Sandhya (1):
> > ARM: AM335x: Enable DDR dynamic IO power down
> >
> > Stephen Warren (16):
> > ARM: tegra: accept any SKU ID for most chips
> > ARM: tegra: set env vars to indicate Cardhu A04 support
> > ARM: tegra: clear $usb_need_init each boot
> > ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28
> > ARM: tegra: rename OUT_CLK_SOURCE_*
> > ARM: tegra: use MASK_BITS_* macros everywhere
> > ARM: tegra: MASK_BITS_ no longer needs specific values
> > ARM: tegra: amend pmc.h for Tegra114+
> > mmc: tegra: support Tegra124
> > ARM: tegra: misc cleanups triggered by Tegra124 review
> > ARM: tegra: pass just partition ID to power_partition()
> > ARM: tegra: enable PLLX only once it's been fully configured
> > ARM: tegra: remove a conditional for CSITE rate
> > ARM: tegra: fix a typo in the tegra114.dtsi
> > ARM: rpi_b: set $fdtfile in default environment
> > ARM: bcm2835: config.mk isn't needed
> >
> > Tom Rini (2):
> > feature-removal-schedule.txt: Drop
> > CONFIG_SYS_ENABLE_PADS_ALL/CLOCKS_ENABLE_ALL am43xx_evm.h: Correct SPL
> > max size
> >
> > Tom Warren (9):
> > ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum
> > ARM: tegra: implement MASK_BITS_31_29
> > ARM: tegra: only build __pinmux_nand() when it's needed
> > ARM: tegra: add/edit headers for Tegra124
> > ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124
> > ARM: tegra: Add CPU (armv7) files for Tegra124
> > ARM: tegra: add common (shared) CPU files
> > ARM: tegra: add DT files for Tegra124 and Venice2
> > ARM: tegra: add Venice2 (Tegra124) board
> >
> > Vivek Gautam (2):
> > exynos5250: usb: Fix VBus gpio numbers for ehci and xhci
> > controllers smdk5250: Remove 'board_usb_vbus_init()' function
> >
> > arch/arm/cpu/arm1176/bcm2835/config.mk | 19 -
> > arch/arm/cpu/arm720t/tegra-common/cpu.c | 75 +-
> > arch/arm/cpu/arm720t/tegra-common/cpu.h | 12 +-
> > arch/arm/cpu/arm720t/tegra114/cpu.c | 48 +-
> > arch/arm/cpu/arm720t/tegra124/Makefile | 8 +
> > arch/arm/cpu/arm720t/tegra124/config.mk | 7 +
> > arch/arm/cpu/arm720t/tegra124/cpu.c | 265 +++
> > arch/arm/cpu/arm720t/tegra30/cpu.c | 14 +-
> > arch/arm/cpu/armv7/exynos/clock.c | 84 +-
> > arch/arm/cpu/armv7/exynos/pinmux.c | 7 +-
> > arch/arm/cpu/armv7/omap-common/clocks-common.c | 53 -
> > arch/arm/cpu/armv7/omap-common/emif-common.c | 5 +-
> > arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 -
> > arch/arm/cpu/armv7/omap4/hw_data.c | 85 -
> > arch/arm/cpu/armv7/omap5/abb.c | 13 +-
> > arch/arm/cpu/armv7/omap5/hw_data.c | 90 +-
> > arch/arm/cpu/armv7/omap5/hwinit.c | 3 +
> > arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 +
> > arch/arm/cpu/armv7/omap5/sdram.c | 4 +
> > arch/arm/cpu/armv7/tegra124/Makefile | 6 +
> > arch/arm/cpu/armv7/tegra124/config.mk | 10 +
> > arch/arm/cpu/armv7/zynq/u-boot.lds | 99 ++
> > arch/arm/cpu/tegra-common/ap.c | 18 +-
> > arch/arm/cpu/tegra-common/board.c | 10 +-
> > arch/arm/cpu/tegra-common/cache.c | 10 +-
> > arch/arm/cpu/tegra-common/clock.c | 128 +-
> > arch/arm/cpu/tegra114-common/clock.c | 16 +-
> > arch/arm/cpu/tegra124-common/Makefile | 10 +
> > arch/arm/cpu/tegra124-common/clock.c | 826 +++++++++
> > arch/arm/cpu/tegra124-common/funcmux.c | 69 +
> > arch/arm/cpu/tegra124-common/pinmux.c | 730 ++++++++
> > arch/arm/cpu/tegra20-common/clock.c | 4 +-
> > arch/arm/cpu/tegra30-common/clock.c | 39 +-
> > arch/arm/dts/tegra114.dtsi | 2 +-
> > arch/arm/dts/tegra124.dtsi | 250 +++
> > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 8 +-
> > arch/arm/include/asm/arch-exynos/cpu.h | 8 +-
> > arch/arm/include/asm/arch-exynos/gpio.h | 245 +--
> > arch/arm/include/asm/arch-exynos/periph.h | 3 +-
> > arch/arm/include/asm/arch-omap3/omap3.h | 6 +-
> > arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
> > arch/arm/include/asm/arch-omap5/omap.h | 3 +
> > arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
> > arch/arm/include/asm/arch-s5pc1xx/cpu.h | 7 +
> > arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +-
> > arch/arm/include/asm/arch-tegra/clk_rst.h | 187 ++-
> > arch/arm/include/asm/arch-tegra/clock.h | 17 +
> > arch/arm/include/asm/arch-tegra/gp_padctrl.h | 1 +
> > arch/arm/include/asm/arch-tegra/pmc.h | 270 ++-
> > arch/arm/include/asm/arch-tegra/tegra.h | 2 +
> > arch/arm/include/asm/arch-tegra124/ahb.h | 91 +
> > arch/arm/include/asm/arch-tegra124/clock-tables.h | 496 ++++++
> > arch/arm/include/asm/arch-tegra124/clock.h | 19 +
> > arch/arm/include/asm/arch-tegra124/flow.h | 40 +
> > arch/arm/include/asm/arch-tegra124/funcmux.h | 23 +
> > arch/arm/include/asm/arch-tegra124/gp_padctrl.h | 74 +
> > arch/arm/include/asm/arch-tegra124/gpio.h | 303 ++++
> > arch/arm/include/asm/arch-tegra124/hardware.h | 16 +
> > arch/arm/include/asm/arch-tegra124/pinmux.h | 620 +++++++
> > arch/arm/include/asm/arch-tegra124/pmu.h | 14 +
> > arch/arm/include/asm/arch-tegra124/spl.h | 13 +
> > arch/arm/include/asm/arch-tegra124/sysctr.h | 26 +
> > arch/arm/include/asm/arch-tegra124/tegra.h | 30 +
> > arch/arm/include/asm/arch-tegra124/usb.h | 268 +++
> > arch/arm/include/asm/omap_common.h | 2 +-
> > board/armltd/versatile/versatile.c | 4 +
> > board/keymile/km_arm/fpga_config.c | 26 +
> > board/keymile/km_arm/km_arm.c | 20 +-
> > board/keymile/scripts/develop-arm.txt | 1 -
> > board/keymile/scripts/develop-common.txt | 1 +
> > board/keymile/scripts/develop-ppc_82xx.txt | 1 -
> > board/keymile/scripts/develop-ppc_8xx.txt | 1 -
> > board/keymile/scripts/ramfs-arm.txt | 1 -
> > board/keymile/scripts/ramfs-common.txt | 1 +
> > board/keymile/scripts/ramfs-ppc_82xx.txt | 1 -
> > board/keymile/scripts/ramfs-ppc_8xx.txt | 1 -
> > board/nvidia/common/board.c | 2 +
> > board/nvidia/dts/tegra124-venice2.dts | 84 +
> > board/nvidia/venice2/Makefile | 9 +
> > board/nvidia/venice2/as3722_init.c | 91 +
> > board/nvidia/venice2/as3722_init.h | 38 +
> > board/nvidia/venice2/pinmux-config-venice2.h | 339 ++++
> > board/nvidia/venice2/venice2.c | 33 +
> > board/samsung/common/Makefile | 1 +
> > board/samsung/common/dfu_sample_env.txt | 9 +
> > board/samsung/common/misc.c | 411 +++++
> > board/samsung/dts/exynos5250-smdk5250.dts | 2 +-
> > board/samsung/dts/exynos5250-snow.dts | 4 +-
> > board/samsung/goni/goni.c | 17 +
> > board/samsung/smdk5250/smdk5250.c | 19 -
> > board/samsung/trats/trats.c | 21 +-
> > board/samsung/trats2/trats2.c | 34 +-
> > board/samsung/universal_c210/universal.c | 21 +-
> > board/ti/am43xx/board.c | 2 +-
> > board/ti/omap5_uevm/evm.c | 13 -
> > board/ti/omap5_uevm/mux_data.h | 234 ---
> > board/ti/panda/panda.c | 30 -
> > board/ti/panda/panda_mux_data.h | 186 ---
> > board/ti/sdp4430/sdp.c | 20 -
> > board/ti/sdp4430/sdp4430_mux_data.h | 197 ---
> > boards.cfg | 2 +
> > common/lcd.c | 27 +-
> > doc/feature-removal-schedule.txt | 16 -
> > drivers/gpio/s5p_gpio.c | 15 +-
> > drivers/mmc/tegra_mmc.c | 9 +
> > drivers/power/battery/bat_trats2.c | 2 +-
> > drivers/serial/serial_s5p.c | 4 +-
> > drivers/video/exynos_fb.c | 28 -
> > drivers/video/exynos_fimd.c | 15 +-
> > include/configs/am43xx_evm.h | 2 +-
> > include/configs/cardhu.h | 4 +
> > include/configs/dra7xx_evm.h | 4 +-
> > include/configs/km/keymile-common.h | 9 +-
> > include/configs/km/km-powerpc.h | 6 +-
> > include/configs/km/km_arm.h | 14 +-
> > include/configs/km/kmp204x-common.h | 1 +
> > include/configs/km_kirkwood.h | 15 +-
> > include/configs/omap3_igep00x0.h | 189 +--
> > include/configs/omap4_panda.h | 4 +-
> > include/configs/omap4_sdp4430.h | 4 +-
> > include/configs/omap5_uevm.h | 4 +-
> > include/configs/rpi_b.h | 1 +
> > include/configs/s5p_goni.h | 10 +-
> > include/configs/s5pc210_universal.h | 46 +-
> > include/configs/tegra-common-post.h | 8 +-
> > include/configs/tegra124-common.h | 83 +
> > include/configs/ti_am335x_common.h | 4 +
> > include/configs/ti_armv7_common.h | 11 +-
> > include/configs/ti_omap3_common.h | 73 +
> > include/configs/{omap4_common.h => ti_omap4_common.h} | 10 +-
> > include/configs/{omap5_common.h => ti_omap5_common.h} | 10 +-
> > include/configs/trats.h | 50 +-
> > include/configs/trats2.h | 47 +-
> > include/configs/venice2.h | 79 +
> > include/configs/versatile.h | 3 +-
> > include/configs/zynq-common.h | 4 +-
> > include/fdtdec.h | 1 +
> > include/lcd.h | 2 +
> > include/power/max77686_pmic.h | 2 +
> > include/power/pmic.h | 1 -
> > include/samsung/misc.h | 29 +
> > lib/fdtdec.c | 1 +
> > lib/tizen/tizen.c | 21 +-
> > lib/tizen/tizen_hd_logo.h | 5057
> > -------------------------------------------------------
> > lib/tizen/tizen_hd_logo_data.h | 15 -
> > lib/tizen/tizen_logo_16bpp.h | 10025
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > lib/tizen/tizen_logo_16bpp_gzip.h | 727 ++++++++
> > tools/relocate-rela.c | 2 +- 148
> > files changed, 17595 insertions(+), 6850 deletions(-) delete mode
> > 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> > arch/arm/cpu/arm720t/tegra124/Makefile create mode 100644
> > arch/arm/cpu/arm720t/tegra124/config.mk create mode 100644
> > arch/arm/cpu/arm720t/tegra124/cpu.c create mode 100644
> > arch/arm/cpu/armv7/tegra124/Makefile create mode 100644
> > arch/arm/cpu/armv7/tegra124/config.mk create mode 100644
> > arch/arm/cpu/armv7/zynq/u-boot.lds create mode 100644
> > arch/arm/cpu/tegra124-common/Makefile create mode 100644
> > arch/arm/cpu/tegra124-common/clock.c create mode 100644
> > arch/arm/cpu/tegra124-common/funcmux.c create mode 100644
> > arch/arm/cpu/tegra124-common/pinmux.c create mode 100644
> > arch/arm/dts/tegra124.dtsi create mode 100644
> > arch/arm/include/asm/arch-tegra124/ahb.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/clock-tables.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/clock.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/flow.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/funcmux.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/gp_padctrl.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/gpio.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/hardware.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/pinmux.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/pmu.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/spl.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/sysctr.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/tegra.h create mode 100644
> > arch/arm/include/asm/arch-tegra124/usb.h create mode 100644
> > board/nvidia/dts/tegra124-venice2.dts create mode 100644
> > board/nvidia/venice2/Makefile create mode 100644
> > board/nvidia/venice2/as3722_init.c create mode 100644
> > board/nvidia/venice2/as3722_init.h create mode 100644
> > board/nvidia/venice2/pinmux-config-venice2.h create mode 100644
> > board/nvidia/venice2/venice2.c create mode 100644
> > board/samsung/common/dfu_sample_env.txt create mode 100644
> > board/samsung/common/misc.c create mode 100644
> > include/configs/tegra124-common.h create mode 100644
> > include/configs/ti_omap3_common.h rename
> > include/configs/{omap4_common.h => ti_omap4_common.h} (95%) rename
> > include/configs/{omap5_common.h => ti_omap5_common.h} (95%) create
> > mode 100644 include/configs/venice2.h create mode 100644
> > include/samsung/misc.h delete mode 100644 lib/tizen/tizen_hd_logo.h
> > delete mode 100644 lib/tizen/tizen_hd_logo_data.h create mode 100644
> > lib/tizen/tizen_logo_16bpp.h create mode 100644
> > lib/tizen/tizen_logo_16bpp_gzip.h
>
> Applied to u-boot/master, thanks!
Thanks! I will now rebase and handle Marex' PXA and Michal's Zynq
PRs.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-02-18 18:21 ` Stephen Warren
@ 2014-02-18 18:29 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-02-18 18:29 UTC (permalink / raw)
To: u-boot
On Tue, Feb 18, 2014 at 11:21:28AM -0700, Stephen Warren wrote:
> On 02/18/2014 10:50 AM, Tom Rini wrote:
> > On Thu, Feb 13, 2014 at 06:43:41PM +0100, Albert ARIBAUD wrote:
> >
> >> Hi Tom,
> >>
> >> The following changes since commit
> >> 0876703cf2ee107372b56037d4eeeb7604c56796:
> >>
> >> boards.cfg: Keep the entries sorted (2014-01-27 08:28:35 -0500)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.denx.de/u-boot-arm master
> >>
> >> for you to fetch changes up to 9c134e189a95c976dab94d4f28444a5398627188:
> >>
> >> arm/km: introduce kmsugp1 target (2014-02-13 17:45:36 +0100)
> ...
> > Applied to u-boot/master, thanks!
>
> How often does u-boot/master get pushed, and is there any replication
> delay once it does?
It gets pushed as often as I spam out accepted messages. And yes,
there's a replication delay. I believe it's every 6 hours, starting at
midnight +0200 ? Wolfgang?
> The most recent commit I see in u-boot/master was committed on Feb 7.
> Since these emails are a trigger for me and others to go grab the latest
> commits, it'd be nice if there was at most a very tiny delay between
> receiving the email, and actually being able to pull the commits. Last
> time I had this issue, I think I had to wait over 24 hours for the push
> or replication delay, which was a bit annoying, since I needed to
> remember to go back and check every so often.
I think there was a human mistake back then. But yes, would it be
possible to sync things out more automatically Wolfgang? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140218/fe90ab29/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-02-18 17:50 ` Tom Rini
@ 2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Stephen Warren @ 2014-02-18 18:21 UTC (permalink / raw)
To: u-boot
On 02/18/2014 10:50 AM, Tom Rini wrote:
> On Thu, Feb 13, 2014 at 06:43:41PM +0100, Albert ARIBAUD wrote:
>
>> Hi Tom,
>>
>> The following changes since commit
>> 0876703cf2ee107372b56037d4eeeb7604c56796:
>>
>> boards.cfg: Keep the entries sorted (2014-01-27 08:28:35 -0500)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm master
>>
>> for you to fetch changes up to 9c134e189a95c976dab94d4f28444a5398627188:
>>
>> arm/km: introduce kmsugp1 target (2014-02-13 17:45:36 +0100)
...
> Applied to u-boot/master, thanks!
How often does u-boot/master get pushed, and is there any replication
delay once it does?
The most recent commit I see in u-boot/master was committed on Feb 7.
Since these emails are a trigger for me and others to go grab the latest
commits, it'd be nice if there was at most a very tiny delay between
receiving the email, and actually being able to pull the commits. Last
time I had this issue, I think I had to wait over 24 hours for the push
or replication delay, which was a bit annoying, since I needed to
remember to go back and check every so often.
If it's replication delay, perhaps the Linux Foundation's kernel.org
code could be stolen; that does (almost?) real-time replication from the
push-to servers to the public r/o-mirrors, triggered by the git push
action. That makes my life a lot easier, since I can "git push" then
immediately send the "applied" email.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-02-13 17:43 Albert ARIBAUD
@ 2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:47 ` Albert ARIBAUD
0 siblings, 2 replies; 261+ messages in thread
From: Tom Rini @ 2014-02-18 17:50 UTC (permalink / raw)
To: u-boot
On Thu, Feb 13, 2014 at 06:43:41PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 0876703cf2ee107372b56037d4eeeb7604c56796:
>
> boards.cfg: Keep the entries sorted (2014-01-27 08:28:35 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 9c134e189a95c976dab94d4f28444a5398627188:
>
> arm/km: introduce kmsugp1 target (2014-02-13 17:45:36 +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (3):
> Merge branch 'u-boot-arm/next' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
>
> Enric Balletb? i Serra (7):
> ARM: OMAP4: Rename to ti_omap4_common.h
> ARM: OMAP5: Rename to ti_omap5_common.h
> TI: armv7: Move ELM support to SoC configuration file.
> TI: armv7: Do not define the number DRAM banks if is already
> defined. ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
> TI: OMAP3: Create common config files for TI OMAP3 platforms.
> OMAP3: igep00x0: Convert to ti_omap3_common.h.
>
> Gerlando Falauto (3):
> arm/km: enable FDT for km_kirwkood
> arm/km: define fdt_high env variable and allow backwards
> compatibility arm/km: introduce kmsugp1 target
>
> Holger Brunck (5):
> arm/km: drop unneeded define
> arm/km: make local function startup_allowed static
> arm/km/suv31: switch to 256MB RAM
> arm/km: add CONFIG_KM_BOARD_EXTRA_ENV to default environment
> arm/km: fix wrong error handling
>
> Inha Song (3):
> serial: s5p: set automatically clears after resetting Rx FIFO
> exynos: clock: fixed that cfg is set to wrong value.
> exynos: clock: use the clear and set bits macros.
>
> Jassi Brar (2):
> ARM: OMAP4/5: Remove dead code against
> CONFIG_SYS_CLOCKS_ENABLE_ALL ARM: OMAP4/5: Remove dead code against
> CONFIG_SYS_ENABLE_PADS_ALL
>
> Jim Lin (1):
> ARM: tegra: fix "bootp" issue for Tegra124 too
>
> Jimmy Zhang (1):
> ARM: tegra: don't exceed AVP limits when configuring PLLP
>
> Linus Walleij (2):
> ARM: versatile: pass correct machine type for Versatile AB
> ARM: versatile: pass console setting to the kernel
>
> Lokesh Vutla (1):
> ARM: AM43xx: Enable DDR dynamic IO power down for DDR3
>
> Masahiro Yamada (1):
> relocate-rela: replace a magic number with sizeof(Elf64_Rela)
>
> Michal Simek (2):
> zynq: Use full tftpboot command instead of shortcut tftp
> zynq: Fix elf header generation
>
> Minkyu Kang (3):
> exynos: pinmux: sort the list of peripherals
> exynos: pinmux: remove unnecessary define
> exynos: pinmux: remove unnecessary routine
>
> Nishanth Menon (2):
> DRA7: Add support for ES1.1 silicon ID code
> DRA7: add ABB setup for MPU voltage domain
>
> Piotr Wilczek (8):
> arm:exynos: add cpu revision
> arm:s5pc110: add cpu revision
> board:samsung:common: set envs with board unified information
> board:samsung:goni: add env variables describing platform
> board:samsung:universal: add env variables describing platform
> board:samsung:trats: add env variables describing platform
> board:samsung:trats2: add env variables describing platform
> board:samsung:trats/trats2: enable boot with appended and
> separated DTB
>
> Przemyslaw Marczak (12):
> s5p: gpio: change gpio coding method for s5p gpio.
> trats2: Code cleanup.
> samsung: common: Add file for common functions, draw_logo()
> cleanup. common: lcd.c: fix data abort exception when try to access bmp
> header lib: tizen: change Tizen logo with the new one.
> video: exynos: fimd: add support for various display color modes
> samsung: boards: update display configs with 16bpp mode.
> samsung: misc: Add LCD download menu.
> trats: add LCD download menu support
> trats2: add LCD download menu support
> universal: add LCD download menu support
> config: trats: trats2: extend dfu_alt_info by env update settings
>
> Satyanarayana, Sandhya (1):
> ARM: AM335x: Enable DDR dynamic IO power down
>
> Stephen Warren (16):
> ARM: tegra: accept any SKU ID for most chips
> ARM: tegra: set env vars to indicate Cardhu A04 support
> ARM: tegra: clear $usb_need_init each boot
> ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28
> ARM: tegra: rename OUT_CLK_SOURCE_*
> ARM: tegra: use MASK_BITS_* macros everywhere
> ARM: tegra: MASK_BITS_ no longer needs specific values
> ARM: tegra: amend pmc.h for Tegra114+
> mmc: tegra: support Tegra124
> ARM: tegra: misc cleanups triggered by Tegra124 review
> ARM: tegra: pass just partition ID to power_partition()
> ARM: tegra: enable PLLX only once it's been fully configured
> ARM: tegra: remove a conditional for CSITE rate
> ARM: tegra: fix a typo in the tegra114.dtsi
> ARM: rpi_b: set $fdtfile in default environment
> ARM: bcm2835: config.mk isn't needed
>
> Tom Rini (2):
> feature-removal-schedule.txt: Drop
> CONFIG_SYS_ENABLE_PADS_ALL/CLOCKS_ENABLE_ALL am43xx_evm.h: Correct SPL
> max size
>
> Tom Warren (9):
> ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum
> ARM: tegra: implement MASK_BITS_31_29
> ARM: tegra: only build __pinmux_nand() when it's needed
> ARM: tegra: add/edit headers for Tegra124
> ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124
> ARM: tegra: Add CPU (armv7) files for Tegra124
> ARM: tegra: add common (shared) CPU files
> ARM: tegra: add DT files for Tegra124 and Venice2
> ARM: tegra: add Venice2 (Tegra124) board
>
> Vivek Gautam (2):
> exynos5250: usb: Fix VBus gpio numbers for ehci and xhci
> controllers smdk5250: Remove 'board_usb_vbus_init()' function
>
> arch/arm/cpu/arm1176/bcm2835/config.mk | 19 -
> arch/arm/cpu/arm720t/tegra-common/cpu.c | 75 +-
> arch/arm/cpu/arm720t/tegra-common/cpu.h | 12 +-
> arch/arm/cpu/arm720t/tegra114/cpu.c | 48 +-
> arch/arm/cpu/arm720t/tegra124/Makefile | 8 +
> arch/arm/cpu/arm720t/tegra124/config.mk | 7 +
> arch/arm/cpu/arm720t/tegra124/cpu.c | 265 +++
> arch/arm/cpu/arm720t/tegra30/cpu.c | 14 +-
> arch/arm/cpu/armv7/exynos/clock.c | 84 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 7 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 53 -
> arch/arm/cpu/armv7/omap-common/emif-common.c | 5 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 85 -
> arch/arm/cpu/armv7/omap5/abb.c | 13 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 90 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 3 +
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 +
> arch/arm/cpu/armv7/omap5/sdram.c | 4 +
> arch/arm/cpu/armv7/tegra124/Makefile | 6 +
> arch/arm/cpu/armv7/tegra124/config.mk | 10 +
> arch/arm/cpu/armv7/zynq/u-boot.lds | 99 ++
> arch/arm/cpu/tegra-common/ap.c | 18 +-
> arch/arm/cpu/tegra-common/board.c | 10 +-
> arch/arm/cpu/tegra-common/cache.c | 10 +-
> arch/arm/cpu/tegra-common/clock.c | 128 +-
> arch/arm/cpu/tegra114-common/clock.c | 16 +-
> arch/arm/cpu/tegra124-common/Makefile | 10 +
> arch/arm/cpu/tegra124-common/clock.c | 826 +++++++++
> arch/arm/cpu/tegra124-common/funcmux.c | 69 +
> arch/arm/cpu/tegra124-common/pinmux.c | 730 ++++++++
> arch/arm/cpu/tegra20-common/clock.c | 4 +-
> arch/arm/cpu/tegra30-common/clock.c | 39 +-
> arch/arm/dts/tegra114.dtsi | 2 +-
> arch/arm/dts/tegra124.dtsi | 250 +++
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 8 +-
> arch/arm/include/asm/arch-exynos/cpu.h | 8 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 245 +--
> arch/arm/include/asm/arch-exynos/periph.h | 3 +-
> arch/arm/include/asm/arch-omap3/omap3.h | 6 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
> arch/arm/include/asm/arch-omap5/omap.h | 3 +
> arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
> arch/arm/include/asm/arch-s5pc1xx/cpu.h | 7 +
> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +-
> arch/arm/include/asm/arch-tegra/clk_rst.h | 187 ++-
> arch/arm/include/asm/arch-tegra/clock.h | 17 +
> arch/arm/include/asm/arch-tegra/gp_padctrl.h | 1 +
> arch/arm/include/asm/arch-tegra/pmc.h | 270 ++-
> arch/arm/include/asm/arch-tegra/tegra.h | 2 +
> arch/arm/include/asm/arch-tegra124/ahb.h | 91 +
> arch/arm/include/asm/arch-tegra124/clock-tables.h | 496 ++++++
> arch/arm/include/asm/arch-tegra124/clock.h | 19 +
> arch/arm/include/asm/arch-tegra124/flow.h | 40 +
> arch/arm/include/asm/arch-tegra124/funcmux.h | 23 +
> arch/arm/include/asm/arch-tegra124/gp_padctrl.h | 74 +
> arch/arm/include/asm/arch-tegra124/gpio.h | 303 ++++
> arch/arm/include/asm/arch-tegra124/hardware.h | 16 +
> arch/arm/include/asm/arch-tegra124/pinmux.h | 620 +++++++
> arch/arm/include/asm/arch-tegra124/pmu.h | 14 +
> arch/arm/include/asm/arch-tegra124/spl.h | 13 +
> arch/arm/include/asm/arch-tegra124/sysctr.h | 26 +
> arch/arm/include/asm/arch-tegra124/tegra.h | 30 +
> arch/arm/include/asm/arch-tegra124/usb.h | 268 +++
> arch/arm/include/asm/omap_common.h | 2 +-
> board/armltd/versatile/versatile.c | 4 +
> board/keymile/km_arm/fpga_config.c | 26 +
> board/keymile/km_arm/km_arm.c | 20 +-
> board/keymile/scripts/develop-arm.txt | 1 -
> board/keymile/scripts/develop-common.txt | 1 +
> board/keymile/scripts/develop-ppc_82xx.txt | 1 -
> board/keymile/scripts/develop-ppc_8xx.txt | 1 -
> board/keymile/scripts/ramfs-arm.txt | 1 -
> board/keymile/scripts/ramfs-common.txt | 1 +
> board/keymile/scripts/ramfs-ppc_82xx.txt | 1 -
> board/keymile/scripts/ramfs-ppc_8xx.txt | 1 -
> board/nvidia/common/board.c | 2 +
> board/nvidia/dts/tegra124-venice2.dts | 84 +
> board/nvidia/venice2/Makefile | 9 +
> board/nvidia/venice2/as3722_init.c | 91 +
> board/nvidia/venice2/as3722_init.h | 38 +
> board/nvidia/venice2/pinmux-config-venice2.h | 339 ++++
> board/nvidia/venice2/venice2.c | 33 +
> board/samsung/common/Makefile | 1 +
> board/samsung/common/dfu_sample_env.txt | 9 +
> board/samsung/common/misc.c | 411 +++++
> board/samsung/dts/exynos5250-smdk5250.dts | 2 +-
> board/samsung/dts/exynos5250-snow.dts | 4 +-
> board/samsung/goni/goni.c | 17 +
> board/samsung/smdk5250/smdk5250.c | 19 -
> board/samsung/trats/trats.c | 21 +-
> board/samsung/trats2/trats2.c | 34 +-
> board/samsung/universal_c210/universal.c | 21 +-
> board/ti/am43xx/board.c | 2 +-
> board/ti/omap5_uevm/evm.c | 13 -
> board/ti/omap5_uevm/mux_data.h | 234 ---
> board/ti/panda/panda.c | 30 -
> board/ti/panda/panda_mux_data.h | 186 ---
> board/ti/sdp4430/sdp.c | 20 -
> board/ti/sdp4430/sdp4430_mux_data.h | 197 ---
> boards.cfg | 2 +
> common/lcd.c | 27 +-
> doc/feature-removal-schedule.txt | 16 -
> drivers/gpio/s5p_gpio.c | 15 +-
> drivers/mmc/tegra_mmc.c | 9 +
> drivers/power/battery/bat_trats2.c | 2 +-
> drivers/serial/serial_s5p.c | 4 +-
> drivers/video/exynos_fb.c | 28 -
> drivers/video/exynos_fimd.c | 15 +-
> include/configs/am43xx_evm.h | 2 +-
> include/configs/cardhu.h | 4 +
> include/configs/dra7xx_evm.h | 4 +-
> include/configs/km/keymile-common.h | 9 +-
> include/configs/km/km-powerpc.h | 6 +-
> include/configs/km/km_arm.h | 14 +-
> include/configs/km/kmp204x-common.h | 1 +
> include/configs/km_kirkwood.h | 15 +-
> include/configs/omap3_igep00x0.h | 189 +--
> include/configs/omap4_panda.h | 4 +-
> include/configs/omap4_sdp4430.h | 4 +-
> include/configs/omap5_uevm.h | 4 +-
> include/configs/rpi_b.h | 1 +
> include/configs/s5p_goni.h | 10 +-
> include/configs/s5pc210_universal.h | 46 +-
> include/configs/tegra-common-post.h | 8 +-
> include/configs/tegra124-common.h | 83 +
> include/configs/ti_am335x_common.h | 4 +
> include/configs/ti_armv7_common.h | 11 +-
> include/configs/ti_omap3_common.h | 73 +
> include/configs/{omap4_common.h => ti_omap4_common.h} | 10 +-
> include/configs/{omap5_common.h => ti_omap5_common.h} | 10 +-
> include/configs/trats.h | 50 +-
> include/configs/trats2.h | 47 +-
> include/configs/venice2.h | 79 +
> include/configs/versatile.h | 3 +-
> include/configs/zynq-common.h | 4 +-
> include/fdtdec.h | 1 +
> include/lcd.h | 2 +
> include/power/max77686_pmic.h | 2 +
> include/power/pmic.h | 1 -
> include/samsung/misc.h | 29 +
> lib/fdtdec.c | 1 +
> lib/tizen/tizen.c | 21 +-
> lib/tizen/tizen_hd_logo.h | 5057
> -------------------------------------------------------
> lib/tizen/tizen_hd_logo_data.h | 15 -
> lib/tizen/tizen_logo_16bpp.h | 10025
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> lib/tizen/tizen_logo_16bpp_gzip.h | 727 ++++++++
> tools/relocate-rela.c | 2 +- 148
> files changed, 17595 insertions(+), 6850 deletions(-) delete mode
> 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> arch/arm/cpu/arm720t/tegra124/Makefile create mode 100644
> arch/arm/cpu/arm720t/tegra124/config.mk create mode 100644
> arch/arm/cpu/arm720t/tegra124/cpu.c create mode 100644
> arch/arm/cpu/armv7/tegra124/Makefile create mode 100644
> arch/arm/cpu/armv7/tegra124/config.mk create mode 100644
> arch/arm/cpu/armv7/zynq/u-boot.lds create mode 100644
> arch/arm/cpu/tegra124-common/Makefile create mode 100644
> arch/arm/cpu/tegra124-common/clock.c create mode 100644
> arch/arm/cpu/tegra124-common/funcmux.c create mode 100644
> arch/arm/cpu/tegra124-common/pinmux.c create mode 100644
> arch/arm/dts/tegra124.dtsi create mode 100644
> arch/arm/include/asm/arch-tegra124/ahb.h create mode 100644
> arch/arm/include/asm/arch-tegra124/clock-tables.h create mode 100644
> arch/arm/include/asm/arch-tegra124/clock.h create mode 100644
> arch/arm/include/asm/arch-tegra124/flow.h create mode 100644
> arch/arm/include/asm/arch-tegra124/funcmux.h create mode 100644
> arch/arm/include/asm/arch-tegra124/gp_padctrl.h create mode 100644
> arch/arm/include/asm/arch-tegra124/gpio.h create mode 100644
> arch/arm/include/asm/arch-tegra124/hardware.h create mode 100644
> arch/arm/include/asm/arch-tegra124/pinmux.h create mode 100644
> arch/arm/include/asm/arch-tegra124/pmu.h create mode 100644
> arch/arm/include/asm/arch-tegra124/spl.h create mode 100644
> arch/arm/include/asm/arch-tegra124/sysctr.h create mode 100644
> arch/arm/include/asm/arch-tegra124/tegra.h create mode 100644
> arch/arm/include/asm/arch-tegra124/usb.h create mode 100644
> board/nvidia/dts/tegra124-venice2.dts create mode 100644
> board/nvidia/venice2/Makefile create mode 100644
> board/nvidia/venice2/as3722_init.c create mode 100644
> board/nvidia/venice2/as3722_init.h create mode 100644
> board/nvidia/venice2/pinmux-config-venice2.h create mode 100644
> board/nvidia/venice2/venice2.c create mode 100644
> board/samsung/common/dfu_sample_env.txt create mode 100644
> board/samsung/common/misc.c create mode 100644
> include/configs/tegra124-common.h create mode 100644
> include/configs/ti_omap3_common.h rename
> include/configs/{omap4_common.h => ti_omap4_common.h} (95%) rename
> include/configs/{omap5_common.h => ti_omap5_common.h} (95%) create
> mode 100644 include/configs/venice2.h create mode 100644
> include/samsung/misc.h delete mode 100644 lib/tizen/tizen_hd_logo.h
> delete mode 100644 lib/tizen/tizen_hd_logo_data.h create mode 100644
> lib/tizen/tizen_logo_16bpp.h create mode 100644
> lib/tizen/tizen_logo_16bpp_gzip.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140218/fd43cff9/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-02-13 17:43 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
0876703cf2ee107372b56037d4eeeb7604c56796:
boards.cfg: Keep the entries sorted (2014-01-27 08:28:35 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 9c134e189a95c976dab94d4f28444a5398627188:
arm/km: introduce kmsugp1 target (2014-02-13 17:45:36 +0100)
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge branch 'u-boot-arm/next' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Enric Balletb? i Serra (7):
ARM: OMAP4: Rename to ti_omap4_common.h
ARM: OMAP5: Rename to ti_omap5_common.h
TI: armv7: Move ELM support to SoC configuration file.
TI: armv7: Do not define the number DRAM banks if is already
defined. ARM: OMAP3: Rename OMAP3_PUBLIC_SRAM_* to NON_SECURE_SRAM_*
TI: OMAP3: Create common config files for TI OMAP3 platforms.
OMAP3: igep00x0: Convert to ti_omap3_common.h.
Gerlando Falauto (3):
arm/km: enable FDT for km_kirwkood
arm/km: define fdt_high env variable and allow backwards
compatibility arm/km: introduce kmsugp1 target
Holger Brunck (5):
arm/km: drop unneeded define
arm/km: make local function startup_allowed static
arm/km/suv31: switch to 256MB RAM
arm/km: add CONFIG_KM_BOARD_EXTRA_ENV to default environment
arm/km: fix wrong error handling
Inha Song (3):
serial: s5p: set automatically clears after resetting Rx FIFO
exynos: clock: fixed that cfg is set to wrong value.
exynos: clock: use the clear and set bits macros.
Jassi Brar (2):
ARM: OMAP4/5: Remove dead code against
CONFIG_SYS_CLOCKS_ENABLE_ALL ARM: OMAP4/5: Remove dead code against
CONFIG_SYS_ENABLE_PADS_ALL
Jim Lin (1):
ARM: tegra: fix "bootp" issue for Tegra124 too
Jimmy Zhang (1):
ARM: tegra: don't exceed AVP limits when configuring PLLP
Linus Walleij (2):
ARM: versatile: pass correct machine type for Versatile AB
ARM: versatile: pass console setting to the kernel
Lokesh Vutla (1):
ARM: AM43xx: Enable DDR dynamic IO power down for DDR3
Masahiro Yamada (1):
relocate-rela: replace a magic number with sizeof(Elf64_Rela)
Michal Simek (2):
zynq: Use full tftpboot command instead of shortcut tftp
zynq: Fix elf header generation
Minkyu Kang (3):
exynos: pinmux: sort the list of peripherals
exynos: pinmux: remove unnecessary define
exynos: pinmux: remove unnecessary routine
Nishanth Menon (2):
DRA7: Add support for ES1.1 silicon ID code
DRA7: add ABB setup for MPU voltage domain
Piotr Wilczek (8):
arm:exynos: add cpu revision
arm:s5pc110: add cpu revision
board:samsung:common: set envs with board unified information
board:samsung:goni: add env variables describing platform
board:samsung:universal: add env variables describing platform
board:samsung:trats: add env variables describing platform
board:samsung:trats2: add env variables describing platform
board:samsung:trats/trats2: enable boot with appended and
separated DTB
Przemyslaw Marczak (12):
s5p: gpio: change gpio coding method for s5p gpio.
trats2: Code cleanup.
samsung: common: Add file for common functions, draw_logo()
cleanup. common: lcd.c: fix data abort exception when try to access bmp
header lib: tizen: change Tizen logo with the new one.
video: exynos: fimd: add support for various display color modes
samsung: boards: update display configs with 16bpp mode.
samsung: misc: Add LCD download menu.
trats: add LCD download menu support
trats2: add LCD download menu support
universal: add LCD download menu support
config: trats: trats2: extend dfu_alt_info by env update settings
Satyanarayana, Sandhya (1):
ARM: AM335x: Enable DDR dynamic IO power down
Stephen Warren (16):
ARM: tegra: accept any SKU ID for most chips
ARM: tegra: set env vars to indicate Cardhu A04 support
ARM: tegra: clear $usb_need_init each boot
ARM: tegra: rename MASK_BITS_29_28 to MASK_BITS_31_28
ARM: tegra: rename OUT_CLK_SOURCE_*
ARM: tegra: use MASK_BITS_* macros everywhere
ARM: tegra: MASK_BITS_ no longer needs specific values
ARM: tegra: amend pmc.h for Tegra114+
mmc: tegra: support Tegra124
ARM: tegra: misc cleanups triggered by Tegra124 review
ARM: tegra: pass just partition ID to power_partition()
ARM: tegra: enable PLLX only once it's been fully configured
ARM: tegra: remove a conditional for CSITE rate
ARM: tegra: fix a typo in the tegra114.dtsi
ARM: rpi_b: set $fdtfile in default environment
ARM: bcm2835: config.mk isn't needed
Tom Rini (2):
feature-removal-schedule.txt: Drop
CONFIG_SYS_ENABLE_PADS_ALL/CLOCKS_ENABLE_ALL am43xx_evm.h: Correct SPL
max size
Tom Warren (9):
ARM: tegra: deduplicate MASK_BITS_xxx clock mux enum
ARM: tegra: implement MASK_BITS_31_29
ARM: tegra: only build __pinmux_nand() when it's needed
ARM: tegra: add/edit headers for Tegra124
ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124
ARM: tegra: Add CPU (armv7) files for Tegra124
ARM: tegra: add common (shared) CPU files
ARM: tegra: add DT files for Tegra124 and Venice2
ARM: tegra: add Venice2 (Tegra124) board
Vivek Gautam (2):
exynos5250: usb: Fix VBus gpio numbers for ehci and xhci
controllers smdk5250: Remove 'board_usb_vbus_init()' function
arch/arm/cpu/arm1176/bcm2835/config.mk | 19 -
arch/arm/cpu/arm720t/tegra-common/cpu.c | 75 +-
arch/arm/cpu/arm720t/tegra-common/cpu.h | 12 +-
arch/arm/cpu/arm720t/tegra114/cpu.c | 48 +-
arch/arm/cpu/arm720t/tegra124/Makefile | 8 +
arch/arm/cpu/arm720t/tegra124/config.mk | 7 +
arch/arm/cpu/arm720t/tegra124/cpu.c | 265 +++
arch/arm/cpu/arm720t/tegra30/cpu.c | 14 +-
arch/arm/cpu/armv7/exynos/clock.c | 84 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 7 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 53 -
arch/arm/cpu/armv7/omap-common/emif-common.c | 5 +-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 6 -
arch/arm/cpu/armv7/omap4/hw_data.c | 85 -
arch/arm/cpu/armv7/omap5/abb.c | 13 +-
arch/arm/cpu/armv7/omap5/hw_data.c | 90 +-
arch/arm/cpu/armv7/omap5/hwinit.c | 3 +
arch/arm/cpu/armv7/omap5/prcm-regs.c | 8 +
arch/arm/cpu/armv7/omap5/sdram.c | 4 +
arch/arm/cpu/armv7/tegra124/Makefile | 6 +
arch/arm/cpu/armv7/tegra124/config.mk | 10 +
arch/arm/cpu/armv7/zynq/u-boot.lds | 99 ++
arch/arm/cpu/tegra-common/ap.c | 18 +-
arch/arm/cpu/tegra-common/board.c | 10 +-
arch/arm/cpu/tegra-common/cache.c | 10 +-
arch/arm/cpu/tegra-common/clock.c | 128 +-
arch/arm/cpu/tegra114-common/clock.c | 16 +-
arch/arm/cpu/tegra124-common/Makefile | 10 +
arch/arm/cpu/tegra124-common/clock.c | 826 +++++++++
arch/arm/cpu/tegra124-common/funcmux.c | 69 +
arch/arm/cpu/tegra124-common/pinmux.c | 730 ++++++++
arch/arm/cpu/tegra20-common/clock.c | 4 +-
arch/arm/cpu/tegra30-common/clock.c | 39 +-
arch/arm/dts/tegra114.dtsi | 2 +-
arch/arm/dts/tegra124.dtsi | 250 +++
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 8 +-
arch/arm/include/asm/arch-exynos/cpu.h | 8 +-
arch/arm/include/asm/arch-exynos/gpio.h | 245 +--
arch/arm/include/asm/arch-exynos/periph.h | 3 +-
arch/arm/include/asm/arch-omap3/omap3.h | 6 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 1 -
arch/arm/include/asm/arch-omap5/omap.h | 3 +
arch/arm/include/asm/arch-omap5/sys_proto.h | 1 -
arch/arm/include/asm/arch-s5pc1xx/cpu.h | 7 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +-
arch/arm/include/asm/arch-tegra/clk_rst.h | 187 ++-
arch/arm/include/asm/arch-tegra/clock.h | 17 +
arch/arm/include/asm/arch-tegra/gp_padctrl.h | 1 +
arch/arm/include/asm/arch-tegra/pmc.h | 270 ++-
arch/arm/include/asm/arch-tegra/tegra.h | 2 +
arch/arm/include/asm/arch-tegra124/ahb.h | 91 +
arch/arm/include/asm/arch-tegra124/clock-tables.h | 496 ++++++
arch/arm/include/asm/arch-tegra124/clock.h | 19 +
arch/arm/include/asm/arch-tegra124/flow.h | 40 +
arch/arm/include/asm/arch-tegra124/funcmux.h | 23 +
arch/arm/include/asm/arch-tegra124/gp_padctrl.h | 74 +
arch/arm/include/asm/arch-tegra124/gpio.h | 303 ++++
arch/arm/include/asm/arch-tegra124/hardware.h | 16 +
arch/arm/include/asm/arch-tegra124/pinmux.h | 620 +++++++
arch/arm/include/asm/arch-tegra124/pmu.h | 14 +
arch/arm/include/asm/arch-tegra124/spl.h | 13 +
arch/arm/include/asm/arch-tegra124/sysctr.h | 26 +
arch/arm/include/asm/arch-tegra124/tegra.h | 30 +
arch/arm/include/asm/arch-tegra124/usb.h | 268 +++
arch/arm/include/asm/omap_common.h | 2 +-
board/armltd/versatile/versatile.c | 4 +
board/keymile/km_arm/fpga_config.c | 26 +
board/keymile/km_arm/km_arm.c | 20 +-
board/keymile/scripts/develop-arm.txt | 1 -
board/keymile/scripts/develop-common.txt | 1 +
board/keymile/scripts/develop-ppc_82xx.txt | 1 -
board/keymile/scripts/develop-ppc_8xx.txt | 1 -
board/keymile/scripts/ramfs-arm.txt | 1 -
board/keymile/scripts/ramfs-common.txt | 1 +
board/keymile/scripts/ramfs-ppc_82xx.txt | 1 -
board/keymile/scripts/ramfs-ppc_8xx.txt | 1 -
board/nvidia/common/board.c | 2 +
board/nvidia/dts/tegra124-venice2.dts | 84 +
board/nvidia/venice2/Makefile | 9 +
board/nvidia/venice2/as3722_init.c | 91 +
board/nvidia/venice2/as3722_init.h | 38 +
board/nvidia/venice2/pinmux-config-venice2.h | 339 ++++
board/nvidia/venice2/venice2.c | 33 +
board/samsung/common/Makefile | 1 +
board/samsung/common/dfu_sample_env.txt | 9 +
board/samsung/common/misc.c | 411 +++++
board/samsung/dts/exynos5250-smdk5250.dts | 2 +-
board/samsung/dts/exynos5250-snow.dts | 4 +-
board/samsung/goni/goni.c | 17 +
board/samsung/smdk5250/smdk5250.c | 19 -
board/samsung/trats/trats.c | 21 +-
board/samsung/trats2/trats2.c | 34 +-
board/samsung/universal_c210/universal.c | 21 +-
board/ti/am43xx/board.c | 2 +-
board/ti/omap5_uevm/evm.c | 13 -
board/ti/omap5_uevm/mux_data.h | 234 ---
board/ti/panda/panda.c | 30 -
board/ti/panda/panda_mux_data.h | 186 ---
board/ti/sdp4430/sdp.c | 20 -
board/ti/sdp4430/sdp4430_mux_data.h | 197 ---
boards.cfg | 2 +
common/lcd.c | 27 +-
doc/feature-removal-schedule.txt | 16 -
drivers/gpio/s5p_gpio.c | 15 +-
drivers/mmc/tegra_mmc.c | 9 +
drivers/power/battery/bat_trats2.c | 2 +-
drivers/serial/serial_s5p.c | 4 +-
drivers/video/exynos_fb.c | 28 -
drivers/video/exynos_fimd.c | 15 +-
include/configs/am43xx_evm.h | 2 +-
include/configs/cardhu.h | 4 +
include/configs/dra7xx_evm.h | 4 +-
include/configs/km/keymile-common.h | 9 +-
include/configs/km/km-powerpc.h | 6 +-
include/configs/km/km_arm.h | 14 +-
include/configs/km/kmp204x-common.h | 1 +
include/configs/km_kirkwood.h | 15 +-
include/configs/omap3_igep00x0.h | 189 +--
include/configs/omap4_panda.h | 4 +-
include/configs/omap4_sdp4430.h | 4 +-
include/configs/omap5_uevm.h | 4 +-
include/configs/rpi_b.h | 1 +
include/configs/s5p_goni.h | 10 +-
include/configs/s5pc210_universal.h | 46 +-
include/configs/tegra-common-post.h | 8 +-
include/configs/tegra124-common.h | 83 +
include/configs/ti_am335x_common.h | 4 +
include/configs/ti_armv7_common.h | 11 +-
include/configs/ti_omap3_common.h | 73 +
include/configs/{omap4_common.h => ti_omap4_common.h} | 10 +-
include/configs/{omap5_common.h => ti_omap5_common.h} | 10 +-
include/configs/trats.h | 50 +-
include/configs/trats2.h | 47 +-
include/configs/venice2.h | 79 +
include/configs/versatile.h | 3 +-
include/configs/zynq-common.h | 4 +-
include/fdtdec.h | 1 +
include/lcd.h | 2 +
include/power/max77686_pmic.h | 2 +
include/power/pmic.h | 1 -
include/samsung/misc.h | 29 +
lib/fdtdec.c | 1 +
lib/tizen/tizen.c | 21 +-
lib/tizen/tizen_hd_logo.h | 5057
-------------------------------------------------------
lib/tizen/tizen_hd_logo_data.h | 15 -
lib/tizen/tizen_logo_16bpp.h | 10025
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lib/tizen/tizen_logo_16bpp_gzip.h | 727 ++++++++
tools/relocate-rela.c | 2 +- 148
files changed, 17595 insertions(+), 6850 deletions(-) delete mode
100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
arch/arm/cpu/arm720t/tegra124/Makefile create mode 100644
arch/arm/cpu/arm720t/tegra124/config.mk create mode 100644
arch/arm/cpu/arm720t/tegra124/cpu.c create mode 100644
arch/arm/cpu/armv7/tegra124/Makefile create mode 100644
arch/arm/cpu/armv7/tegra124/config.mk create mode 100644
arch/arm/cpu/armv7/zynq/u-boot.lds create mode 100644
arch/arm/cpu/tegra124-common/Makefile create mode 100644
arch/arm/cpu/tegra124-common/clock.c create mode 100644
arch/arm/cpu/tegra124-common/funcmux.c create mode 100644
arch/arm/cpu/tegra124-common/pinmux.c create mode 100644
arch/arm/dts/tegra124.dtsi create mode 100644
arch/arm/include/asm/arch-tegra124/ahb.h create mode 100644
arch/arm/include/asm/arch-tegra124/clock-tables.h create mode 100644
arch/arm/include/asm/arch-tegra124/clock.h create mode 100644
arch/arm/include/asm/arch-tegra124/flow.h create mode 100644
arch/arm/include/asm/arch-tegra124/funcmux.h create mode 100644
arch/arm/include/asm/arch-tegra124/gp_padctrl.h create mode 100644
arch/arm/include/asm/arch-tegra124/gpio.h create mode 100644
arch/arm/include/asm/arch-tegra124/hardware.h create mode 100644
arch/arm/include/asm/arch-tegra124/pinmux.h create mode 100644
arch/arm/include/asm/arch-tegra124/pmu.h create mode 100644
arch/arm/include/asm/arch-tegra124/spl.h create mode 100644
arch/arm/include/asm/arch-tegra124/sysctr.h create mode 100644
arch/arm/include/asm/arch-tegra124/tegra.h create mode 100644
arch/arm/include/asm/arch-tegra124/usb.h create mode 100644
board/nvidia/dts/tegra124-venice2.dts create mode 100644
board/nvidia/venice2/Makefile create mode 100644
board/nvidia/venice2/as3722_init.c create mode 100644
board/nvidia/venice2/as3722_init.h create mode 100644
board/nvidia/venice2/pinmux-config-venice2.h create mode 100644
board/nvidia/venice2/venice2.c create mode 100644
board/samsung/common/dfu_sample_env.txt create mode 100644
board/samsung/common/misc.c create mode 100644
include/configs/tegra124-common.h create mode 100644
include/configs/ti_omap3_common.h rename
include/configs/{omap4_common.h => ti_omap4_common.h} (95%) rename
include/configs/{omap5_common.h => ti_omap5_common.h} (95%) create
mode 100644 include/configs/venice2.h create mode 100644
include/samsung/misc.h delete mode 100644 lib/tizen/tizen_hd_logo.h
delete mode 100644 lib/tizen/tizen_hd_logo_data.h create mode 100644
lib/tizen/tizen_logo_16bpp.h create mode 100644
lib/tizen/tizen_logo_16bpp_gzip.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-01-15 15:16 Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2014-01-15 15:16 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
6ba2bc8fa9be4bd09ec43e39cb8e666480ef010c:
arm: use canonical sub mnemonic (2014-01-14 12:38:47 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to bf46e7d8d134521301ff02b6d97e8998aa10a83d:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2014-01-15
15:18:04 +0100)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Fabio Estevam (2):
mx6: clock: Pass the frequency as argument of
enable_fec_anatop_clock() mx6: Add initial support for the Hummingboard
solo
arch/arm/cpu/armv7/mx6/clock.c | 8 +-
arch/arm/include/asm/arch-mx6/clock.h | 9 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +
board/freescale/mx6slevk/mx6slevk.c | 2 +-
board/solidrun/hummingboard/Makefile | 9 +
board/solidrun/hummingboard/README | 40 ++++
board/solidrun/hummingboard/hummingboard.c | 187
+++++++++++++++++ board/solidrun/hummingboard/solo.cfg
| 25 +++ board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg | 74
+++++++ board/solidrun/mx6-microsom/clocks.cfg | 33 +++
.../mx6-microsom/ddr-800mhz-32bit-setup.cfg | 76 +++++++
boards.cfg | 1 +
include/configs/hummingboard.h | 226
+++++++++++++++++++++ 13 files changed, 691 insertions(+), 3
deletions(-) create mode 100644 board/solidrun/hummingboard/Makefile
create mode 100644 board/solidrun/hummingboard/README
create mode 100644 board/solidrun/hummingboard/hummingboard.c
create mode 100644 board/solidrun/hummingboard/solo.cfg
create mode 100644 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
create mode 100644 board/solidrun/mx6-microsom/clocks.cfg
create mode 100644
board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg create mode
100644 include/configs/hummingboard.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-01-14 13:04 Albert ARIBAUD
@ 2014-01-14 21:02 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-01-14 21:02 UTC (permalink / raw)
To: u-boot
On Tue, Jan 14, 2014 at 02:04:08PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 4efd69250f6118ebd783867b3809001a1886ce9e:
>
> ARM: pxa: Fix OneNAND window access on VPAC270 (2014-01-13 12:39:10
> +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 6ba2bc8fa9be4bd09ec43e39cb8e666480ef010c:
>
> arm: use canonical sub mnemonic (2014-01-14 12:38:47 +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (4):
> mini2440: remove board support
> mx1ads: remove board support
> arm: put .hash, .got.plt and .machine_param back in binaries
> Merge 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Andreas Bie?mann (1):
> arm: use canonical sub mnemonic
>
> Christian Gmeiner (1):
> imx6: make use of lldiv(..)
>
> Fabio Estevam (7):
> wandboard: Return from cpu_eth_init() directly
> titanium: Return from cpu_eth_init() directly
> mx6qarm2: Remove unneeded error message when cpu_eth_init() fails
> mx6qsabreauto: Return from cpu_eth_init() directly
> mx6sabresd: Return from cpu_eth_init() directly
> mx6slevk: Return from cpu_eth_init() directly
> mx6slevk: Include "mx6_common.h"
>
> John Weber (1):
> wandboard: Set default environment to use zImage
>
> Otavio Salvador (1):
> mx6sabresd: Add eMMC specific environment to allow U-Boot update
>
> arch/arm/config.mk | 2 +-
> arch/arm/cpu/armv7/exynos/config.mk | 7 +
> arch/arm/cpu/armv7/lowlevel_init.S | 2 +-
> arch/arm/cpu/armv7/mx6/clock.c | 3 +-
> arch/arm/cpu/u-boot.lds | 3 +-
> arch/arm/lib/crt0.S | 2 +-
> board/barco/titanium/titanium.c | 8 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 7 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 8 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 8 +-
> board/freescale/mx6slevk/mx6slevk.c | 10 +-
> board/friendlyarm/mini2440/Makefile | 8 -
> board/friendlyarm/mini2440/mini2440.c | 118 ----------
> board/friendlyarm/mini2440/mini2440.h | 144 ------------
> board/mx1ads/Makefile | 16 --
> board/mx1ads/lowlevel_init.S | 68 ------
> board/mx1ads/mx1ads.c | 178 ---------------
> board/mx1ads/syncflash.c | 307
> --------------------------
> board/wandboard/wandboard.c | 8 +-
> boards.cfg | 2 -
> doc/README.mini2440 | 28 ---
> doc/README.scrapyard | 6 +-
> include/configs/mx1ads.h | 163 --------------
> include/configs/mx6sabre_common.h | 23 ++
> include/configs/mx6sabresd.h | 2 +
> include/configs/mx6slevk.h | 1 +
> include/configs/wandboard.h | 20 +-
> spl/Makefile | 2 +- 28 files
> changed, 61 insertions(+), 1093 deletions(-) create mode 100644
> arch/arm/cpu/armv7/exynos/config.mk delete mode 100644
> board/friendlyarm/mini2440/Makefile delete mode 100644
> board/friendlyarm/mini2440/mini2440.c delete mode 100644
> board/friendlyarm/mini2440/mini2440.h delete mode 100644
> board/mx1ads/Makefile delete mode 100644 board/mx1ads/lowlevel_init.S
> delete mode 100644 board/mx1ads/mx1ads.c
> delete mode 100644 board/mx1ads/syncflash.c
> delete mode 100644 doc/README.mini2440
> delete mode 100644 include/configs/mx1ads.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140114/66d0ea09/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-01-14 13:04 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
4efd69250f6118ebd783867b3809001a1886ce9e:
ARM: pxa: Fix OneNAND window access on VPAC270 (2014-01-13 12:39:10
+0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 6ba2bc8fa9be4bd09ec43e39cb8e666480ef010c:
arm: use canonical sub mnemonic (2014-01-14 12:38:47 +0100)
----------------------------------------------------------------
Albert ARIBAUD (4):
mini2440: remove board support
mx1ads: remove board support
arm: put .hash, .got.plt and .machine_param back in binaries
Merge 'u-boot-imx/master' into 'u-boot-arm/master'
Andreas Bie?mann (1):
arm: use canonical sub mnemonic
Christian Gmeiner (1):
imx6: make use of lldiv(..)
Fabio Estevam (7):
wandboard: Return from cpu_eth_init() directly
titanium: Return from cpu_eth_init() directly
mx6qarm2: Remove unneeded error message when cpu_eth_init() fails
mx6qsabreauto: Return from cpu_eth_init() directly
mx6sabresd: Return from cpu_eth_init() directly
mx6slevk: Return from cpu_eth_init() directly
mx6slevk: Include "mx6_common.h"
John Weber (1):
wandboard: Set default environment to use zImage
Otavio Salvador (1):
mx6sabresd: Add eMMC specific environment to allow U-Boot update
arch/arm/config.mk | 2 +-
arch/arm/cpu/armv7/exynos/config.mk | 7 +
arch/arm/cpu/armv7/lowlevel_init.S | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 3 +-
arch/arm/cpu/u-boot.lds | 3 +-
arch/arm/lib/crt0.S | 2 +-
board/barco/titanium/titanium.c | 8 +-
board/freescale/mx6qarm2/mx6qarm2.c | 7 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 8 +-
board/freescale/mx6sabresd/mx6sabresd.c | 8 +-
board/freescale/mx6slevk/mx6slevk.c | 10 +-
board/friendlyarm/mini2440/Makefile | 8 -
board/friendlyarm/mini2440/mini2440.c | 118 ----------
board/friendlyarm/mini2440/mini2440.h | 144 ------------
board/mx1ads/Makefile | 16 --
board/mx1ads/lowlevel_init.S | 68 ------
board/mx1ads/mx1ads.c | 178 ---------------
board/mx1ads/syncflash.c | 307
--------------------------
board/wandboard/wandboard.c | 8 +-
boards.cfg | 2 -
doc/README.mini2440 | 28 ---
doc/README.scrapyard | 6 +-
include/configs/mx1ads.h | 163 --------------
include/configs/mx6sabre_common.h | 23 ++
include/configs/mx6sabresd.h | 2 +
include/configs/mx6slevk.h | 1 +
include/configs/wandboard.h | 20 +-
spl/Makefile | 2 +- 28 files
changed, 61 insertions(+), 1093 deletions(-) create mode 100644
arch/arm/cpu/armv7/exynos/config.mk delete mode 100644
board/friendlyarm/mini2440/Makefile delete mode 100644
board/friendlyarm/mini2440/mini2440.c delete mode 100644
board/friendlyarm/mini2440/mini2440.h delete mode 100644
board/mx1ads/Makefile delete mode 100644 board/mx1ads/lowlevel_init.S
delete mode 100644 board/mx1ads/mx1ads.c
delete mode 100644 board/mx1ads/syncflash.c
delete mode 100644 doc/README.mini2440
delete mode 100644 include/configs/mx1ads.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-01-13 18:49 Albert ARIBAUD
@ 2014-01-13 19:42 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2014-01-13 19:42 UTC (permalink / raw)
To: u-boot
On Mon, Jan 13, 2014 at 07:49:26PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 7f673c99c2d8d1aa21996c5b914f06d784b080ca:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10
> 10:56:00 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 4efd69250f6118ebd783867b3809001a1886ce9e:
>
> ARM: pxa: Fix OneNAND window access on VPAC270 (2014-01-13 12:39:10
> +0100)
>
> ----------------------------------------------------------------
> Marek Vasut (2):
> ARM: pxa: Fix OneNAND SPL builds
> ARM: pxa: Fix OneNAND window access on VPAC270
>
> arch/arm/cpu/pxa/config.mk | 13 +++++++++++++
> board/vpac270/u-boot-spl.lds | 1 +
> include/configs/vpac270.h | 2 +-
> 3 files changed, 15 insertions(+), 1 deletion(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140113/9e54d2c9/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-01-13 18:49 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
7f673c99c2d8d1aa21996c5b914f06d784b080ca:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10
10:56:00 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 4efd69250f6118ebd783867b3809001a1886ce9e:
ARM: pxa: Fix OneNAND window access on VPAC270 (2014-01-13 12:39:10
+0100)
----------------------------------------------------------------
Marek Vasut (2):
ARM: pxa: Fix OneNAND SPL builds
ARM: pxa: Fix OneNAND window access on VPAC270
arch/arm/cpu/pxa/config.mk | 13 +++++++++++++
board/vpac270/u-boot-spl.lds | 1 +
include/configs/vpac270.h | 2 +-
3 files changed, 15 insertions(+), 1 deletion(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-01-10 20:03 ` Tom Rini
@ 2014-01-11 8:11 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2014-01-11 8:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Fri, 10 Jan 2014 15:03:26 -0500, Tom Rini <trini@ti.com> wrote:
> On Fri, Jan 10, 2014 at 04:43:51PM +0100, Albert ARIBAUD wrote:
>
> > Hello Tom,
> >
> > The following changes since commit 4b210ad34282bfd9fc982a8e3c9a9126f4094cdb:
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-arm (2013-12-10 17:15:18 -0500)
> >
> > are available in the git repository at:
> >
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to 10a147bc665367111920be657409a5d56d3c0590:
> >
> > doc: Update the zynq u-boot status (2014-01-10 15:18:33 +0100)
> Applied to u-boot/master, thanks!
Thanks! ARM repo fast-forwared to u-boot/master.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2014-01-10 15:43 Albert ARIBAUD
@ 2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Tom Rini @ 2014-01-10 20:03 UTC (permalink / raw)
To: u-boot
On Fri, Jan 10, 2014 at 04:43:51PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit 4b210ad34282bfd9fc982a8e3c9a9126f4094cdb:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2013-12-10 17:15:18 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 10a147bc665367111920be657409a5d56d3c0590:
>
> doc: Update the zynq u-boot status (2014-01-10 15:18:33 +0100)
>
> ----------------------------------------------------------------
> Alban Bedel (4):
> ARM: tegra: support SKU b1 of Tegra30
> i2c: tegra: Add the fifth bus on SoC with more than 4 buses
> ARM: tegra: Add the Tamonten? NG Evaluation Carrier board
> arm: tegra: Fix the CPU complex reset masks
>
> Albert ARIBAUD (8):
> Revert "ARM: move interrupt_init to before relocation"
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge remote-tracking branch 'u-boot-pxa/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> arm: make 'MAKEALL -a' distinguish between arm and aarch64
>
> Bo Shen (3):
> arm: atmel: at91sam9x5: cleanup cs configure for spi
> arm: atmel: at91sam9x5: cleanup unneeded undef
> arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
>
> Dan Murphy (1):
> arm: am437: Fix offset for USB registers
>
> David Feng (7):
> fdt_support: 64bit initrd start address support
> cmd_pxe: remove compiling warnings
> add weak entry definition
> arm64: core support
> arm64: generic board support
> arm64: board support of vexpress_aemv8a
> arm64: MAKEALL, filter armv8 boards from LIST_arm
>
> Eric Nelson (8):
> i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
> i.MX6DQ/DLS: remove useless mux/pad declarations
> i.MX6DQ: Add Pinmux settings that are present in mainline and Dual-Lite/Solo
> i.MX6DQ/DLS: remove unused pad declarations
> i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
> imx-common: remove extraneous semicolon from macro
> i.MX6 (DQ/DLS): use macros for mux and pad declarations
> ARM: mx6: Update non-Freescale boards to include CPU errata.
>
> Fabio Estevam (24):
> configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
> wandboard: Return the error immediately when ipuv3_fb_init() fails
> wandboard: Return the error when cpu_eth_init() fails
> titanium: Return the error when cpu_eth_init() fails
> nitrogen6x: Remove unused OCOTP options
> mx51evk: Fix pmic_init() argument
> mx31pdk: Fix pmic_init() argument
> efikamx: Fix pmic_init() argument
> power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
> mx6sabresd: Fix wrong colors in LVDS splash
> mx6sabresd: Add SPI NOR support
> imx: Explicitly pass the I2C bus number in pmic_init()
> configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
> mx6: clock: Fix the calculation of PLL_ENET frequency
> mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
> mx6sabresd: Fix LVDS width and color format
> doc: README.fuse: Add an example on how to use the fuse API on mx6q
> mx6sabre_common.h: Add CONFIG_CMD_FUSE support
> mx6: soc: Staticize set_vddsoc()
> mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages
> mx6: soc: Set the VDDSOC at 1.175 V
> mx6: soc: Introduce set_ldo_voltage()
> mx6: soc: Add the required LDO ramp up delay
> mx6: soc: Disable VDDPU regulator
>
> Frank Li (1):
> imx6: fix random hang when download by usb
>
> Giuseppe Pagano (5):
> udoo: Move and optimize platform register setting.
> udoo: Add ethernet support (FEC + Micrel KSZ9031).
> udoo: Fix watchdog during kernel boot.
> nitrogen6x: Move setup_sata to common part
> udoo: Add SATA support on uDoo Board.
>
> Heiko Schocher (1):
> am335x, siemens boards: adapt default environment setting
>
> Holger Brunck (1):
> arm/km: fix i2c mux define for km_kirkwood_128m16 target
>
> Jagannadha Sutradharudu Teki (30):
> zynq: Enable CONFIG_FIT_VERBOSE
> zynq: Enable Boot FreeBSD/vxWorks
> zynq: Cleanup on miscellaneous configs
> zynq: Cleanup on memory configs
> zynq: Minor config cleanup
> zynq: Enable cache options
> zynq: Add UART0, UART1 configs support
> zynq: Add GEM0, GEM1 configs support
> zynq-common: Rename zynq with zynq-common
> doc: zynq: Add information on zynq u-boot
> zynq: Add zynq zc70x board support
> zynq: Add zynq zed board support
> zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
> zynq-common: Define exact TEXT_BASE
> zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
> zynq: Add zynq microzed board support
> zynq: Add zynq_zc770 xm010 board support
> zynq: Add zynq_zc770 xm013 board support
> zynq: Add zynq_zc770 xm012 board support
> zynq: Add support to find bootmode
> zynq-common: Define default environment
> zynq-common: Change Env. Sector size to 128Kb
> zynq-common: Define flash env. partition
> zynq-common: Define CONFIG_ENV_OVERWRITE
> dts: zynq: Add basic fdt support
> gpio: zynq: Add dummy gpio routines
> zynq-common: Enable verified boot(RSA)
> dts: zynq: Add more zynq dts files
> zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
> doc: Update the zynq u-boot status
>
> Jeroen Hofstee (3):
> ARM: fix the standalone programs
> ARM: tam3517-common: fix nand spl boot
> ARM: twister: add missing gpio clock init
>
> Jim Lin (1):
> ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"
>
> Jimmy Zhang (1):
> Tegra114: Fix PLLX M, N, P init settings
>
> Karlheinz Jerg (1):
> arm/km: add support for km_kirkwood_128m16 board
>
> Liu Ying (1):
> MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
>
> Lokesh Vutla (15):
> ARM: OMAP4: Move TEXT_BASE down to non-HS limit
> ARM: DRA7xx: Change clk divider setting
> ARM: OMAP5: clocks: Update MPU settings for OPP_NOM
> ARM: AM43xx: Update the base addresses of modules
> ARM: AM43xx: Adapt to ti_armv7_common.h config file
> ARM: AM43xx: Add L2 Support
> ARM: AM43xx: Add extra ENV settings
> ARM: AM43xx: Select clk source for Timer2
> ARM: AM43xx: Update Current Booting devices list
> ARM: AM43xx: mux: Update mux data
> ARM: AM43xx: clocks: Update DPLL details
> ARM: AM33xx+: Update ioregs to pass different values
> ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
> ARM: AM43xx: GP_EVM: Add support for DDR3
> ARM: AM43xx: Add Maintainer
>
> Luka Perkov (1):
> kirkwood: ib62x0: use device tree and update config
>
> Marek Vasut (4):
> Net: FEC: Fix huge memory leak
> ARM: mx53: video: Add IPUv3 LCD support for M53EVK
> ARM: mxs: tools: Fix errno handling in strtoul() invocation
> ARM: pxa: Fix CONFIG_SYS_HZ on PXA
>
> Michael Heimpold (1):
> mxs_gpio: fix the handling in gpio_direction_output()
>
> Mugunthan V N (1):
> ARM: dra7_evm: read mac address properly from e-fuse
>
> Nikita Kiryanov (3):
> arm: omap: abb: add missing include
> arm: omap: cm_t35: update config file
> arm: omap: cm_t35: enable gpio bank 5 clocks explicitly
>
> Nobuhiro Iwamatsu (7):
> arm: rmobile: Update README.rmobile
> arm: lager: Add support Ethernet
> arm: lager: Add support I2C
> arm: lager: Add support reset function
> arm: koelsch: Add support Ethernet
> arm: koelsch: Add support I2C
> arm: koelsch: Add support reset function
>
> Otavio Salvador (6):
> imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
> mx28evk: Use 512k for fdt partition to align it
> mx28evk: Add 'nandboot' environment command
> mx28evk: Extend environment to easy write of NAND system
> ARM: mx6: Change the FDT loading address to avoid overlaping
> ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
>
> Piotr Wilczek (2):
> board:trats1:trats2: fix adapter number
> board:trats2: fix default partitions and mmc env
>
> Rajeshwari Birje (11):
> EXYNOS5: Create a common board file
> Exynos5420: Add base addresses for 5420
> EXYNOS5420: Add power register structure.
> EXYNOS5420: Add dmc and phy_control register structure
> Exynos5420: Add clock initialization for 5420
> Exynos5420: Add DDR3 initialization for 5420
> Exynos5420: Add support for 5420 in pinmux and gpio
> Exynos5420: Add base patch for SMDK5420
> DTS: Add dts support for SMDK5420
> Config: Add initial config for SMDK5420
> SPL: EXYNOS: Prepare for variable size SPL support
>
> Scott Wood (3):
> arm64: Add tool to statically apply RELA relocations
> arm64: Turn u-boot.bin back into an ELF file after relocate-rela
> arm64: Make checkarmreloc accept arm64 relocations
>
> Sekhar Nori (2):
> ARM: AM43XX: board: add support for reading onboard EEPROM
> ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
>
> Sergei Ianovich (5):
> ARM: pxa: prevent PXA270 occasional reboot freezes
> arm: pxa: fix LP-8x4x USB support
> arm: pxa: fix 2nd flash chip address on LP-8x4x
> arm: pxa: update LP-8x4x to boot DT kernel
> arm: pxa: init ethaddr for LP-8x4x using DT
>
> Sergey Alyoshin (1):
> arm: mx5: Add fuse supply enable in fsl_iim
>
> Stefan Roese (7):
> mx6: titanium: Move BSP code to barco board directory
> arm: omap3: Add SPL support to tao3530
> arm: omap3: Remove bootargs mem_size handling
> arm: omap3: Add board revision output to tao3530
> arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
> arm: omap3: Add SPL support to cm_t35
> arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)
>
> Stefano Babic (1):
> MX6: fix sata compilation for i.MX6
>
> Tapani Utriainen (1):
> arm, omap3: Add support for TechNexion modules
>
> Thierry Reding (2):
> Tegra114: Do not program CPCON field for PLLX
> Change maintainer for Avionic Design boards
>
> Tom Rini (5):
> am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
> am335x_evm: Consolidate DFU environment parts into the DFU part of the file
> cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOS
> TI:omap3: Drop omap3_zoom2
> armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases
>
> Vidya Sagar (1):
> tegra: allow build to succeed with SPL disabled
>
> Yegor Yefremov (1):
> am3517_evm: activate Ethernet PHY
>
> MAKEALL | 12 +-
> Makefile | 41 +-
> arch/arm/config.mk | 7 +-
> arch/arm/cpu/arm720t/tegra-common/cpu.c | 89 +-
> arch/arm/cpu/armv7/am33xx/board.c | 8 +
> arch/arm/cpu/armv7/am33xx/clock.c | 12 +-
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 +
> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +-
> arch/arm/cpu/armv7/am33xx/ddr.c | 146 +-
> arch/arm/cpu/armv7/am33xx/emif4.c | 25 +-
> arch/arm/cpu/armv7/exynos/clock.c | 279 +-
> arch/arm/cpu/armv7/exynos/clock_init.h | 17 +
> arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++-
> arch/arm/cpu/armv7/exynos/dmc_common.c | 60 +-
> arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 +++-
> arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 ++++--
> arch/arm/cpu/armv7/exynos/pinmux.c | 260 +-
> arch/arm/cpu/armv7/mx5/clock.c | 12 +
> arch/arm/cpu/armv7/mx6/clock.c | 23 +-
> arch/arm/cpu/armv7/mx6/soc.c | 110 +-
> arch/arm/cpu/armv7/omap-common/abb.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 14 -
> arch/arm/cpu/armv7/omap5/hw_data.c | 24 +-
> arch/arm/cpu/armv7/zynq/slcr.c | 6 +
> arch/arm/cpu/armv8/Makefile | 17 +
> arch/arm/cpu/armv8/cache.S | 136 +
> arch/arm/cpu/armv8/cache_v8.c | 219 ++
> arch/arm/cpu/armv8/config.mk | 15 +
> arch/arm/cpu/armv8/cpu.c | 43 +
> arch/arm/cpu/armv8/exceptions.S | 113 +
> arch/arm/cpu/armv8/generic_timer.c | 31 +
> arch/arm/cpu/armv8/gic.S | 106 +
> arch/arm/cpu/armv8/start.S | 164 ++
> arch/arm/cpu/armv8/tlb.S | 34 +
> arch/arm/cpu/armv8/transition.S | 83 +
> arch/arm/cpu/armv8/u-boot.lds | 89 +
> arch/arm/cpu/pxa/pxa2xx.c | 1 +
> arch/arm/cpu/tegra-common/ap.c | 1 +
> arch/arm/dts/exynos5.dtsi | 198 ++
> arch/arm/dts/exynos5250.dtsi | 194 +-
> arch/arm/dts/exynos5420.dtsi | 70 +
> arch/arm/dts/zynq-7000.dtsi | 13 +
> arch/arm/imx-common/Makefile | 3 +
> arch/arm/imx-common/cpu.c | 4 +-
> arch/arm/imx-common/sata.c | 34 +
> arch/arm/include/asm/arch-am33xx/clock.h | 7 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 24 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 +-
> arch/arm/include/asm/arch-am33xx/gpio.h | 12 +
> arch/arm/include/asm/arch-am33xx/hardware.h | 7 -
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 +
> arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 20 +-
> arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +
> arch/arm/include/asm/arch-am33xx/omap.h | 4 +-
> arch/arm/include/asm/arch-am33xx/spl.h | 13 +-
> arch/arm/include/asm/arch-exynos/board.h | 17 +
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 494 ++++
> arch/arm/include/asm/arch-exynos/cpu.h | 52 +-
> arch/arm/include/asm/arch-exynos/dmc.h | 177 ++
> arch/arm/include/asm/arch-exynos/gpio.h | 143 +-
> arch/arm/include/asm/arch-exynos/periph.h | 3 +
> arch/arm/include/asm/arch-exynos/power.h | 837 ++++++
> arch/arm/include/asm/arch-mx5/clock.h | 1 +
> arch/arm/include/asm/arch-mx5/crm_regs.h | 3 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 23 +
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 33 +-
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2728 ++++++++------------
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 2642 ++++++++-----------
> arch/arm/include/asm/arch-mx6/sys_proto.h | 2 -
> arch/arm/include/asm/arch-omap4/omap.h | 2 +-
> arch/arm/include/asm/arch-tegra/clock.h | 6 +-
> arch/arm/include/asm/arch-tegra/tegra.h | 1 +
> arch/arm/include/asm/arch-zynq/gpio.h | 25 +
> arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
> arch/arm/include/asm/armv8/mmu.h | 111 +
> arch/arm/include/asm/byteorder.h | 2 +-
> arch/arm/include/asm/cache.h | 5 +
> arch/arm/include/asm/config.h | 6 +
> arch/arm/include/asm/emif.h | 26 +
> arch/arm/include/asm/gic.h | 49 +-
> arch/arm/include/asm/global_data.h | 6 +-
> arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
> arch/arm/include/asm/imx-common/sata.h | 16 +
> arch/arm/include/asm/io.h | 15 +-
> arch/arm/include/asm/macro.h | 53 +
> arch/arm/include/asm/posix_types.h | 8 +
> arch/arm/include/asm/proc-armv/ptrace.h | 21 +
> arch/arm/include/asm/proc-armv/system.h | 59 +-
> arch/arm/include/asm/system.h | 84 +
> arch/arm/include/asm/types.h | 4 +
> arch/arm/include/asm/u-boot.h | 4 +
> arch/arm/include/asm/unaligned.h | 2 +-
> arch/arm/lib/Makefile | 20 +-
> arch/arm/lib/board.c | 10 +-
> arch/arm/lib/bootm.c | 24 +
> arch/arm/lib/crt0_64.S | 113 +
> arch/arm/lib/interrupts_64.c | 120 +
> arch/arm/lib/relocate_64.S | 58 +
> board/armltd/vexpress64/Makefile | 8 +
> board/armltd/vexpress64/vexpress64.c | 56 +
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 1 -
> .../common/pinmux-config-tamonten-ng.h | 385 +++
> board/avionic-design/common/tamonten-ng.c | 85 +
> board/avionic-design/dts/tegra30-tamonten.dtsi | 69 +
> board/avionic-design/dts/tegra30-tec-ng.dts | 18 +
> board/avionic-design/tec-ng/Makefile | 12 +
> board/{freescale => barco}/titanium/Makefile | 0
> board/{freescale => barco}/titanium/imximage.cfg | 0
> board/{freescale => barco}/titanium/titanium.c | 110 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 197 +-
> board/compulab/cm_t335/spl.c | 10 +-
> board/compulab/cm_t35/cm_t35.c | 18 +-
> board/congatec/cgtqmx6eval/cgtqmx6eval.c | 40 +-
> board/denx/m53evk/m53evk.c | 73 +
> board/freescale/mx25pdk/mx25pdk.c | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 2 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/freescale/mx53evk/mx53evk.c | 2 +-
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 68 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 62 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 155 +-
> board/genesi/mx51_efikamx/efikamx.c | 2 +-
> board/icpdas/lp8x4x/lp8x4x.c | 53 +-
> board/isee/igep0033/board.c | 10 +-
> board/logicpd/am3517evm/am3517evm.c | 32 +
> board/logicpd/am3517evm/am3517evm.h | 2 +-
> board/logicpd/zoom2/Makefile | 11 -
> board/logicpd/zoom2/config.mk | 17 -
> board/logicpd/zoom2/debug_board.c | 44 -
> board/logicpd/zoom2/led.c | 116 -
> board/logicpd/zoom2/zoom2.c | 183 --
> board/logicpd/zoom2/zoom2.h | 142 -
> board/logicpd/zoom2/zoom2_serial.c | 130 -
> board/logicpd/zoom2/zoom2_serial.h | 59 -
> board/phytec/pcm051/board.c | 20 +-
> board/renesas/koelsch/koelsch.c | 83 +
> board/renesas/lager/lager.c | 78 +
> board/samsung/common/Makefile | 4 +
> board/samsung/common/board.c | 411 +++
> board/samsung/dts/exynos5420-smdk5420.dts | 169 ++
> board/samsung/smdk5250/exynos5-dt.c | 350 +--
> board/samsung/smdk5250/smdk5250.c | 182 +-
> board/samsung/smdk5420/Makefile | 11 +
> board/samsung/smdk5420/smdk5420.c | 159 ++
> board/samsung/smdk5420/smdk5420_spl.c | 52 +
> board/samsung/trats/trats.c | 2 +-
> board/samsung/trats2/trats2.c | 6 +-
> board/siemens/common/board.c | 9 -
> board/siemens/dxr2/board.c | 12 +-
> board/siemens/pxm2/board.c | 10 +-
> board/siemens/rut/board.c | 10 +-
> board/technexion/tao3530/Makefile | 5 +
> board/technexion/tao3530/tao3530.c | 215 ++
> board/technexion/tao3530/tao3530.h | 371 +++
> board/ti/am335x/board.c | 40 +-
> board/ti/am43xx/board.c | 355 ++-
> board/ti/am43xx/board.h | 36 +
> board/ti/am43xx/mux.c | 35 +-
> board/ti/dra7xx/evm.c | 8 +-
> board/ti/ti814x/evm.c | 4 +-
> board/ti/ti816x/evm.c | 12 +-
> board/udoo/1066mhz_4x256mx16.cfg | 55 +
> board/udoo/clocks.cfg | 32 +
> board/udoo/ddr-setup.cfg | 87 +
> board/udoo/udoo.c | 165 +-
> board/udoo/udoo.cfg | 29 +
> board/wandboard/wandboard.c | 60 +-
> board/xilinx/dts/zynq-microzed.dts | 14 +
> board/xilinx/dts/zynq-zc702.dts | 14 +
> board/xilinx/dts/zynq-zc706.dts | 14 +
> board/xilinx/dts/zynq-zc770-xm010.dts | 14 +
> board/xilinx/dts/zynq-zc770-xm012.dts | 14 +
> board/xilinx/dts/zynq-zc770-xm013.dts | 14 +
> board/xilinx/dts/zynq-zed.dts | 14 +
> board/xilinx/zynq/board.c | 25 +
> boards.cfg | 28 +-
> common/board_f.c | 20 +-
> common/cmd_pxe.c | 4 +-
> common/fdt_support.c | 66 +-
> common/image.c | 1 +
> doc/README.arm64 | 46 +
> doc/README.imx6 | 76 +
> doc/README.rmobile | 49 +-
> doc/README.zynq | 94 +
> drivers/gpio/mxs_gpio.c | 4 +-
> drivers/i2c/tegra_i2c.c | 5 +
> drivers/misc/fsl_iim.c | 13 +-
> drivers/net/fec_mxc.c | 177 +-
> drivers/power/power_fsl.c | 3 +-
> drivers/serial/ns16550.c | 5 +-
> examples/standalone/stubs.c | 19 +-
> include/configs/am335x_evm.h | 23 +-
> include/configs/am3517_evm.h | 5 +
> include/configs/am43xx_evm.h | 204 +-
> include/configs/arndale.h | 1 +
> include/configs/at91sam9x5ek.h | 13 +-
> include/configs/balloon3.h | 10 +-
> include/configs/cam_enc_4xx.h | 2 +
> include/configs/cgtqmx6eval.h | 2 +-
> include/configs/cm_t35.h | 75 +-
> include/configs/exynos5-dt.h | 290 +++
> include/configs/exynos5250-dt.h | 284 +-
> include/configs/ib62x0.h | 38 +-
> include/configs/imx31_phycore.h | 1 -
> include/configs/km_kirkwood.h | 10 +
> include/configs/koelsch.h | 41 +-
> include/configs/lager.h | 35 +
> include/configs/lp8x4x.h | 15 +-
> include/configs/m53evk.h | 16 +
> include/configs/mx25pdk.h | 2 -
> include/configs/mx28evk.h | 56 +-
> include/configs/mx31pdk.h | 1 -
> include/configs/mx35pdk.h | 2 -
> include/configs/mx51evk.h | 1 -
> include/configs/mx53ard.h | 1 -
> include/configs/mx53evk.h | 2 -
> include/configs/mx53loco.h | 2 -
> include/configs/mx53smd.h | 2 -
> include/configs/mx6_common.h | 1 +
> include/configs/mx6qarm2.h | 1 -
> include/configs/mx6sabre_common.h | 20 +-
> include/configs/nitrogen6x.h | 13 +-
> include/configs/omap3_beagle.h | 3 +
> include/configs/omap3_zoom2.h | 237 --
> include/configs/omap4_common.h | 11 +-
> include/configs/palmld.h | 10 +-
> include/configs/palmtc.h | 10 +-
> include/configs/scb9328.h | 6 +-
> include/configs/siemens-am33x-common.h | 2 +-
> include/configs/smdk5420.h | 56 +
> include/configs/tam3517-common.h | 1 +
> include/configs/tao3530.h | 363 +++
> include/configs/tec-ng.h | 84 +
> include/configs/tegra114-common.h | 1 +
> include/configs/tegra30-common.h | 1 +
> include/configs/titanium.h | 1 +
> include/configs/trats2.h | 3 +-
> include/configs/twister.h | 3 +
> include/configs/udoo.h | 31 +-
> include/configs/vexpress_aemv8a.h | 189 ++
> include/configs/wandboard.h | 3 +-
> include/configs/zipitz2.h | 10 +-
> include/configs/zynq-common.h | 238 ++
> include/configs/zynq.h | 139 -
> include/configs/zynq_microzed.h | 26 +
> include/configs/zynq_zc70x.h | 29 +
> include/configs/zynq_zc770.h | 42 +
> include/configs/zynq_zed.h | 27 +
> include/image.h | 1 +
> include/linux/linkage.h | 4 +
> mkconfig | 7 +
> spl/Makefile | 7 +-
> tools/Makefile | 9 +-
> tools/mkexynosspl.c | 167 +-
> tools/mxsimage.c | 1 +
> tools/relocate-rela.c | 189 ++
> 261 files changed, 14926 insertions(+), 6628 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/Makefile
> create mode 100644 arch/arm/cpu/armv8/cache.S
> create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> create mode 100644 arch/arm/cpu/armv8/config.mk
> create mode 100644 arch/arm/cpu/armv8/cpu.c
> create mode 100644 arch/arm/cpu/armv8/exceptions.S
> create mode 100644 arch/arm/cpu/armv8/generic_timer.c
> create mode 100644 arch/arm/cpu/armv8/gic.S
> create mode 100644 arch/arm/cpu/armv8/start.S
> create mode 100644 arch/arm/cpu/armv8/tlb.S
> create mode 100644 arch/arm/cpu/armv8/transition.S
> create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> create mode 100644 arch/arm/dts/exynos5.dtsi
> create mode 100644 arch/arm/dts/exynos5420.dtsi
> create mode 100644 arch/arm/dts/zynq-7000.dtsi
> create mode 100644 arch/arm/imx-common/sata.c
> create mode 100644 arch/arm/include/asm/arch-exynos/board.h
> create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
> create mode 100644 arch/arm/include/asm/armv8/mmu.h
> create mode 100644 arch/arm/include/asm/imx-common/sata.h
> create mode 100644 arch/arm/lib/crt0_64.S
> create mode 100644 arch/arm/lib/interrupts_64.c
> create mode 100644 arch/arm/lib/relocate_64.S
> create mode 100644 board/armltd/vexpress64/Makefile
> create mode 100644 board/armltd/vexpress64/vexpress64.c
> create mode 100644 board/avionic-design/common/pinmux-config-tamonten-ng.h
> create mode 100644 board/avionic-design/common/tamonten-ng.c
> create mode 100644 board/avionic-design/dts/tegra30-tamonten.dtsi
> create mode 100644 board/avionic-design/dts/tegra30-tec-ng.dts
> create mode 100644 board/avionic-design/tec-ng/Makefile
> rename board/{freescale => barco}/titanium/Makefile (100%)
> rename board/{freescale => barco}/titanium/imximage.cfg (100%)
> rename board/{freescale => barco}/titanium/titanium.c (66%)
> delete mode 100644 board/logicpd/zoom2/Makefile
> delete mode 100644 board/logicpd/zoom2/config.mk
> delete mode 100644 board/logicpd/zoom2/debug_board.c
> delete mode 100644 board/logicpd/zoom2/led.c
> delete mode 100644 board/logicpd/zoom2/zoom2.c
> delete mode 100644 board/logicpd/zoom2/zoom2.h
> delete mode 100644 board/logicpd/zoom2/zoom2_serial.c
> delete mode 100644 board/logicpd/zoom2/zoom2_serial.h
> create mode 100644 board/samsung/common/board.c
> create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
> create mode 100644 board/samsung/smdk5420/Makefile
> create mode 100644 board/samsung/smdk5420/smdk5420.c
> create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
> create mode 100644 board/technexion/tao3530/Makefile
> create mode 100644 board/technexion/tao3530/tao3530.c
> create mode 100644 board/technexion/tao3530/tao3530.h
> create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
> create mode 100644 board/udoo/clocks.cfg
> create mode 100644 board/udoo/ddr-setup.cfg
> create mode 100644 board/udoo/udoo.cfg
> create mode 100644 board/xilinx/dts/zynq-microzed.dts
> create mode 100644 board/xilinx/dts/zynq-zc702.dts
> create mode 100644 board/xilinx/dts/zynq-zc706.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
> create mode 100644 board/xilinx/dts/zynq-zed.dts
> create mode 100644 doc/README.arm64
> create mode 100644 doc/README.zynq
> create mode 100644 include/configs/exynos5-dt.h
> delete mode 100644 include/configs/omap3_zoom2.h
> create mode 100644 include/configs/smdk5420.h
> create mode 100644 include/configs/tao3530.h
> create mode 100644 include/configs/tec-ng.h
> create mode 100644 include/configs/vexpress_aemv8a.h
> create mode 100644 include/configs/zynq-common.h
> delete mode 100644 include/configs/zynq.h
> create mode 100644 include/configs/zynq_microzed.h
> create mode 100644 include/configs/zynq_zc70x.h
> create mode 100644 include/configs/zynq_zc770.h
> create mode 100644 include/configs/zynq_zed.h
> create mode 100644 tools/relocate-rela.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140110/0389b20e/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2014-01-10 15:43 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit 4b210ad34282bfd9fc982a8e3c9a9126f4094cdb:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2013-12-10 17:15:18 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 10a147bc665367111920be657409a5d56d3c0590:
doc: Update the zynq u-boot status (2014-01-10 15:18:33 +0100)
----------------------------------------------------------------
Alban Bedel (4):
ARM: tegra: support SKU b1 of Tegra30
i2c: tegra: Add the fifth bus on SoC with more than 4 buses
ARM: tegra: Add the Tamonten? NG Evaluation Carrier board
arm: tegra: Fix the CPU complex reset masks
Albert ARIBAUD (8):
Revert "ARM: move interrupt_init to before relocation"
Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge remote-tracking branch 'u-boot-pxa/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
arm: make 'MAKEALL -a' distinguish between arm and aarch64
Bo Shen (3):
arm: atmel: at91sam9x5: cleanup cs configure for spi
arm: atmel: at91sam9x5: cleanup unneeded undef
arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
Dan Murphy (1):
arm: am437: Fix offset for USB registers
David Feng (7):
fdt_support: 64bit initrd start address support
cmd_pxe: remove compiling warnings
add weak entry definition
arm64: core support
arm64: generic board support
arm64: board support of vexpress_aemv8a
arm64: MAKEALL, filter armv8 boards from LIST_arm
Eric Nelson (8):
i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
i.MX6DQ/DLS: remove useless mux/pad declarations
i.MX6DQ: Add Pinmux settings that are present in mainline and Dual-Lite/Solo
i.MX6DQ/DLS: remove unused pad declarations
i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
imx-common: remove extraneous semicolon from macro
i.MX6 (DQ/DLS): use macros for mux and pad declarations
ARM: mx6: Update non-Freescale boards to include CPU errata.
Fabio Estevam (24):
configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
wandboard: Return the error immediately when ipuv3_fb_init() fails
wandboard: Return the error when cpu_eth_init() fails
titanium: Return the error when cpu_eth_init() fails
nitrogen6x: Remove unused OCOTP options
mx51evk: Fix pmic_init() argument
mx31pdk: Fix pmic_init() argument
efikamx: Fix pmic_init() argument
power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
mx6sabresd: Fix wrong colors in LVDS splash
mx6sabresd: Add SPI NOR support
imx: Explicitly pass the I2C bus number in pmic_init()
configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
mx6: clock: Fix the calculation of PLL_ENET frequency
mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
mx6sabresd: Fix LVDS width and color format
doc: README.fuse: Add an example on how to use the fuse API on mx6q
mx6sabre_common.h: Add CONFIG_CMD_FUSE support
mx6: soc: Staticize set_vddsoc()
mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages
mx6: soc: Set the VDDSOC at 1.175 V
mx6: soc: Introduce set_ldo_voltage()
mx6: soc: Add the required LDO ramp up delay
mx6: soc: Disable VDDPU regulator
Frank Li (1):
imx6: fix random hang when download by usb
Giuseppe Pagano (5):
udoo: Move and optimize platform register setting.
udoo: Add ethernet support (FEC + Micrel KSZ9031).
udoo: Fix watchdog during kernel boot.
nitrogen6x: Move setup_sata to common part
udoo: Add SATA support on uDoo Board.
Heiko Schocher (1):
am335x, siemens boards: adapt default environment setting
Holger Brunck (1):
arm/km: fix i2c mux define for km_kirkwood_128m16 target
Jagannadha Sutradharudu Teki (30):
zynq: Enable CONFIG_FIT_VERBOSE
zynq: Enable Boot FreeBSD/vxWorks
zynq: Cleanup on miscellaneous configs
zynq: Cleanup on memory configs
zynq: Minor config cleanup
zynq: Enable cache options
zynq: Add UART0, UART1 configs support
zynq: Add GEM0, GEM1 configs support
zynq-common: Rename zynq with zynq-common
doc: zynq: Add information on zynq u-boot
zynq: Add zynq zc70x board support
zynq: Add zynq zed board support
zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
zynq-common: Define exact TEXT_BASE
zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
zynq: Add zynq microzed board support
zynq: Add zynq_zc770 xm010 board support
zynq: Add zynq_zc770 xm013 board support
zynq: Add zynq_zc770 xm012 board support
zynq: Add support to find bootmode
zynq-common: Define default environment
zynq-common: Change Env. Sector size to 128Kb
zynq-common: Define flash env. partition
zynq-common: Define CONFIG_ENV_OVERWRITE
dts: zynq: Add basic fdt support
gpio: zynq: Add dummy gpio routines
zynq-common: Enable verified boot(RSA)
dts: zynq: Add more zynq dts files
zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
doc: Update the zynq u-boot status
Jeroen Hofstee (3):
ARM: fix the standalone programs
ARM: tam3517-common: fix nand spl boot
ARM: twister: add missing gpio clock init
Jim Lin (1):
ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"
Jimmy Zhang (1):
Tegra114: Fix PLLX M, N, P init settings
Karlheinz Jerg (1):
arm/km: add support for km_kirkwood_128m16 board
Liu Ying (1):
MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
Lokesh Vutla (15):
ARM: OMAP4: Move TEXT_BASE down to non-HS limit
ARM: DRA7xx: Change clk divider setting
ARM: OMAP5: clocks: Update MPU settings for OPP_NOM
ARM: AM43xx: Update the base addresses of modules
ARM: AM43xx: Adapt to ti_armv7_common.h config file
ARM: AM43xx: Add L2 Support
ARM: AM43xx: Add extra ENV settings
ARM: AM43xx: Select clk source for Timer2
ARM: AM43xx: Update Current Booting devices list
ARM: AM43xx: mux: Update mux data
ARM: AM43xx: clocks: Update DPLL details
ARM: AM33xx+: Update ioregs to pass different values
ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
ARM: AM43xx: GP_EVM: Add support for DDR3
ARM: AM43xx: Add Maintainer
Luka Perkov (1):
kirkwood: ib62x0: use device tree and update config
Marek Vasut (4):
Net: FEC: Fix huge memory leak
ARM: mx53: video: Add IPUv3 LCD support for M53EVK
ARM: mxs: tools: Fix errno handling in strtoul() invocation
ARM: pxa: Fix CONFIG_SYS_HZ on PXA
Michael Heimpold (1):
mxs_gpio: fix the handling in gpio_direction_output()
Mugunthan V N (1):
ARM: dra7_evm: read mac address properly from e-fuse
Nikita Kiryanov (3):
arm: omap: abb: add missing include
arm: omap: cm_t35: update config file
arm: omap: cm_t35: enable gpio bank 5 clocks explicitly
Nobuhiro Iwamatsu (7):
arm: rmobile: Update README.rmobile
arm: lager: Add support Ethernet
arm: lager: Add support I2C
arm: lager: Add support reset function
arm: koelsch: Add support Ethernet
arm: koelsch: Add support I2C
arm: koelsch: Add support reset function
Otavio Salvador (6):
imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
mx28evk: Use 512k for fdt partition to align it
mx28evk: Add 'nandboot' environment command
mx28evk: Extend environment to easy write of NAND system
ARM: mx6: Change the FDT loading address to avoid overlaping
ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
Piotr Wilczek (2):
board:trats1:trats2: fix adapter number
board:trats2: fix default partitions and mmc env
Rajeshwari Birje (11):
EXYNOS5: Create a common board file
Exynos5420: Add base addresses for 5420
EXYNOS5420: Add power register structure.
EXYNOS5420: Add dmc and phy_control register structure
Exynos5420: Add clock initialization for 5420
Exynos5420: Add DDR3 initialization for 5420
Exynos5420: Add support for 5420 in pinmux and gpio
Exynos5420: Add base patch for SMDK5420
DTS: Add dts support for SMDK5420
Config: Add initial config for SMDK5420
SPL: EXYNOS: Prepare for variable size SPL support
Scott Wood (3):
arm64: Add tool to statically apply RELA relocations
arm64: Turn u-boot.bin back into an ELF file after relocate-rela
arm64: Make checkarmreloc accept arm64 relocations
Sekhar Nori (2):
ARM: AM43XX: board: add support for reading onboard EEPROM
ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
Sergei Ianovich (5):
ARM: pxa: prevent PXA270 occasional reboot freezes
arm: pxa: fix LP-8x4x USB support
arm: pxa: fix 2nd flash chip address on LP-8x4x
arm: pxa: update LP-8x4x to boot DT kernel
arm: pxa: init ethaddr for LP-8x4x using DT
Sergey Alyoshin (1):
arm: mx5: Add fuse supply enable in fsl_iim
Stefan Roese (7):
mx6: titanium: Move BSP code to barco board directory
arm: omap3: Add SPL support to tao3530
arm: omap3: Remove bootargs mem_size handling
arm: omap3: Add board revision output to tao3530
arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530
arm: omap3: Add SPL support to cm_t35
arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)
Stefano Babic (1):
MX6: fix sata compilation for i.MX6
Tapani Utriainen (1):
arm, omap3: Add support for TechNexion modules
Thierry Reding (2):
Tegra114: Do not program CPCON field for PLLX
Change maintainer for Avionic Design boards
Tom Rini (5):
am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF
am335x_evm: Consolidate DFU environment parts into the DFU part of the file
cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOS
TI:omap3: Drop omap3_zoom2
armv8: Use __aarch64__ rather than CONFIG_ARM64 in some cases
Vidya Sagar (1):
tegra: allow build to succeed with SPL disabled
Yegor Yefremov (1):
am3517_evm: activate Ethernet PHY
MAKEALL | 12 +-
Makefile | 41 +-
arch/arm/config.mk | 7 +-
arch/arm/cpu/arm720t/tegra-common/cpu.c | 89 +-
arch/arm/cpu/armv7/am33xx/board.c | 8 +
arch/arm/cpu/armv7/am33xx/clock.c | 12 +-
arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 +
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +-
arch/arm/cpu/armv7/am33xx/ddr.c | 146 +-
arch/arm/cpu/armv7/am33xx/emif4.c | 25 +-
arch/arm/cpu/armv7/exynos/clock.c | 279 +-
arch/arm/cpu/armv7/exynos/clock_init.h | 17 +
arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++-
arch/arm/cpu/armv7/exynos/dmc_common.c | 60 +-
arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 +++-
arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 ++++--
arch/arm/cpu/armv7/exynos/pinmux.c | 260 +-
arch/arm/cpu/armv7/mx5/clock.c | 12 +
arch/arm/cpu/armv7/mx6/clock.c | 23 +-
arch/arm/cpu/armv7/mx6/soc.c | 110 +-
arch/arm/cpu/armv7/omap-common/abb.c | 1 +
arch/arm/cpu/armv7/omap-common/emif-common.c | 14 -
arch/arm/cpu/armv7/omap5/hw_data.c | 24 +-
arch/arm/cpu/armv7/zynq/slcr.c | 6 +
arch/arm/cpu/armv8/Makefile | 17 +
arch/arm/cpu/armv8/cache.S | 136 +
arch/arm/cpu/armv8/cache_v8.c | 219 ++
arch/arm/cpu/armv8/config.mk | 15 +
arch/arm/cpu/armv8/cpu.c | 43 +
arch/arm/cpu/armv8/exceptions.S | 113 +
arch/arm/cpu/armv8/generic_timer.c | 31 +
arch/arm/cpu/armv8/gic.S | 106 +
arch/arm/cpu/armv8/start.S | 164 ++
arch/arm/cpu/armv8/tlb.S | 34 +
arch/arm/cpu/armv8/transition.S | 83 +
arch/arm/cpu/armv8/u-boot.lds | 89 +
arch/arm/cpu/pxa/pxa2xx.c | 1 +
arch/arm/cpu/tegra-common/ap.c | 1 +
arch/arm/dts/exynos5.dtsi | 198 ++
arch/arm/dts/exynos5250.dtsi | 194 +-
arch/arm/dts/exynos5420.dtsi | 70 +
arch/arm/dts/zynq-7000.dtsi | 13 +
arch/arm/imx-common/Makefile | 3 +
arch/arm/imx-common/cpu.c | 4 +-
arch/arm/imx-common/sata.c | 34 +
arch/arm/include/asm/arch-am33xx/clock.h | 7 +-
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 +
arch/arm/include/asm/arch-am33xx/cpu.h | 24 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 +-
arch/arm/include/asm/arch-am33xx/gpio.h | 12 +
arch/arm/include/asm/arch-am33xx/hardware.h | 7 -
arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 +
arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 20 +-
arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +
arch/arm/include/asm/arch-am33xx/omap.h | 4 +-
arch/arm/include/asm/arch-am33xx/spl.h | 13 +-
arch/arm/include/asm/arch-exynos/board.h | 17 +
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/clock.h | 494 ++++
arch/arm/include/asm/arch-exynos/cpu.h | 52 +-
arch/arm/include/asm/arch-exynos/dmc.h | 177 ++
arch/arm/include/asm/arch-exynos/gpio.h | 143 +-
arch/arm/include/asm/arch-exynos/periph.h | 3 +
arch/arm/include/asm/arch-exynos/power.h | 837 ++++++
arch/arm/include/asm/arch-mx5/clock.h | 1 +
arch/arm/include/asm/arch-mx5/crm_regs.h | 3 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 23 +
arch/arm/include/asm/arch-mx6/mx6-pins.h | 33 +-
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2728 ++++++++------------
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 2642 ++++++++-----------
arch/arm/include/asm/arch-mx6/sys_proto.h | 2 -
arch/arm/include/asm/arch-omap4/omap.h | 2 +-
arch/arm/include/asm/arch-tegra/clock.h | 6 +-
arch/arm/include/asm/arch-tegra/tegra.h | 1 +
arch/arm/include/asm/arch-zynq/gpio.h | 25 +
arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
arch/arm/include/asm/armv8/mmu.h | 111 +
arch/arm/include/asm/byteorder.h | 2 +-
arch/arm/include/asm/cache.h | 5 +
arch/arm/include/asm/config.h | 6 +
arch/arm/include/asm/emif.h | 26 +
arch/arm/include/asm/gic.h | 49 +-
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/imx-common/iomux-v3.h | 2 +
arch/arm/include/asm/imx-common/sata.h | 16 +
arch/arm/include/asm/io.h | 15 +-
arch/arm/include/asm/macro.h | 53 +
arch/arm/include/asm/posix_types.h | 8 +
arch/arm/include/asm/proc-armv/ptrace.h | 21 +
arch/arm/include/asm/proc-armv/system.h | 59 +-
arch/arm/include/asm/system.h | 84 +
arch/arm/include/asm/types.h | 4 +
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 2 +-
arch/arm/lib/Makefile | 20 +-
arch/arm/lib/board.c | 10 +-
arch/arm/lib/bootm.c | 24 +
arch/arm/lib/crt0_64.S | 113 +
arch/arm/lib/interrupts_64.c | 120 +
arch/arm/lib/relocate_64.S | 58 +
board/armltd/vexpress64/Makefile | 8 +
board/armltd/vexpress64/vexpress64.c | 56 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 1 -
.../common/pinmux-config-tamonten-ng.h | 385 +++
board/avionic-design/common/tamonten-ng.c | 85 +
board/avionic-design/dts/tegra30-tamonten.dtsi | 69 +
board/avionic-design/dts/tegra30-tec-ng.dts | 18 +
board/avionic-design/tec-ng/Makefile | 12 +
board/{freescale => barco}/titanium/Makefile | 0
board/{freescale => barco}/titanium/imximage.cfg | 0
board/{freescale => barco}/titanium/titanium.c | 110 +-
board/boundary/nitrogen6x/nitrogen6x.c | 197 +-
board/compulab/cm_t335/spl.c | 10 +-
board/compulab/cm_t35/cm_t35.c | 18 +-
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 40 +-
board/denx/m53evk/m53evk.c | 73 +
board/freescale/mx25pdk/mx25pdk.c | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 2 +-
board/freescale/mx35pdk/mx35pdk.c | 2 +-
board/freescale/mx51evk/mx51evk.c | 2 +-
board/freescale/mx53evk/mx53evk.c | 2 +-
board/freescale/mx53loco/mx53loco.c | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 68 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 62 +-
board/freescale/mx6sabresd/mx6sabresd.c | 155 +-
board/genesi/mx51_efikamx/efikamx.c | 2 +-
board/icpdas/lp8x4x/lp8x4x.c | 53 +-
board/isee/igep0033/board.c | 10 +-
board/logicpd/am3517evm/am3517evm.c | 32 +
board/logicpd/am3517evm/am3517evm.h | 2 +-
board/logicpd/zoom2/Makefile | 11 -
board/logicpd/zoom2/config.mk | 17 -
board/logicpd/zoom2/debug_board.c | 44 -
board/logicpd/zoom2/led.c | 116 -
board/logicpd/zoom2/zoom2.c | 183 --
board/logicpd/zoom2/zoom2.h | 142 -
board/logicpd/zoom2/zoom2_serial.c | 130 -
board/logicpd/zoom2/zoom2_serial.h | 59 -
board/phytec/pcm051/board.c | 20 +-
board/renesas/koelsch/koelsch.c | 83 +
board/renesas/lager/lager.c | 78 +
board/samsung/common/Makefile | 4 +
board/samsung/common/board.c | 411 +++
board/samsung/dts/exynos5420-smdk5420.dts | 169 ++
board/samsung/smdk5250/exynos5-dt.c | 350 +--
board/samsung/smdk5250/smdk5250.c | 182 +-
board/samsung/smdk5420/Makefile | 11 +
board/samsung/smdk5420/smdk5420.c | 159 ++
board/samsung/smdk5420/smdk5420_spl.c | 52 +
board/samsung/trats/trats.c | 2 +-
board/samsung/trats2/trats2.c | 6 +-
board/siemens/common/board.c | 9 -
board/siemens/dxr2/board.c | 12 +-
board/siemens/pxm2/board.c | 10 +-
board/siemens/rut/board.c | 10 +-
board/technexion/tao3530/Makefile | 5 +
board/technexion/tao3530/tao3530.c | 215 ++
board/technexion/tao3530/tao3530.h | 371 +++
board/ti/am335x/board.c | 40 +-
board/ti/am43xx/board.c | 355 ++-
board/ti/am43xx/board.h | 36 +
board/ti/am43xx/mux.c | 35 +-
board/ti/dra7xx/evm.c | 8 +-
board/ti/ti814x/evm.c | 4 +-
board/ti/ti816x/evm.c | 12 +-
board/udoo/1066mhz_4x256mx16.cfg | 55 +
board/udoo/clocks.cfg | 32 +
board/udoo/ddr-setup.cfg | 87 +
board/udoo/udoo.c | 165 +-
board/udoo/udoo.cfg | 29 +
board/wandboard/wandboard.c | 60 +-
board/xilinx/dts/zynq-microzed.dts | 14 +
board/xilinx/dts/zynq-zc702.dts | 14 +
board/xilinx/dts/zynq-zc706.dts | 14 +
board/xilinx/dts/zynq-zc770-xm010.dts | 14 +
board/xilinx/dts/zynq-zc770-xm012.dts | 14 +
board/xilinx/dts/zynq-zc770-xm013.dts | 14 +
board/xilinx/dts/zynq-zed.dts | 14 +
board/xilinx/zynq/board.c | 25 +
boards.cfg | 28 +-
common/board_f.c | 20 +-
common/cmd_pxe.c | 4 +-
common/fdt_support.c | 66 +-
common/image.c | 1 +
doc/README.arm64 | 46 +
doc/README.imx6 | 76 +
doc/README.rmobile | 49 +-
doc/README.zynq | 94 +
drivers/gpio/mxs_gpio.c | 4 +-
drivers/i2c/tegra_i2c.c | 5 +
drivers/misc/fsl_iim.c | 13 +-
drivers/net/fec_mxc.c | 177 +-
drivers/power/power_fsl.c | 3 +-
drivers/serial/ns16550.c | 5 +-
examples/standalone/stubs.c | 19 +-
include/configs/am335x_evm.h | 23 +-
include/configs/am3517_evm.h | 5 +
include/configs/am43xx_evm.h | 204 +-
include/configs/arndale.h | 1 +
include/configs/at91sam9x5ek.h | 13 +-
include/configs/balloon3.h | 10 +-
include/configs/cam_enc_4xx.h | 2 +
include/configs/cgtqmx6eval.h | 2 +-
include/configs/cm_t35.h | 75 +-
include/configs/exynos5-dt.h | 290 +++
include/configs/exynos5250-dt.h | 284 +-
include/configs/ib62x0.h | 38 +-
include/configs/imx31_phycore.h | 1 -
include/configs/km_kirkwood.h | 10 +
include/configs/koelsch.h | 41 +-
include/configs/lager.h | 35 +
include/configs/lp8x4x.h | 15 +-
include/configs/m53evk.h | 16 +
include/configs/mx25pdk.h | 2 -
include/configs/mx28evk.h | 56 +-
include/configs/mx31pdk.h | 1 -
include/configs/mx35pdk.h | 2 -
include/configs/mx51evk.h | 1 -
include/configs/mx53ard.h | 1 -
include/configs/mx53evk.h | 2 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 2 -
include/configs/mx6_common.h | 1 +
include/configs/mx6qarm2.h | 1 -
include/configs/mx6sabre_common.h | 20 +-
include/configs/nitrogen6x.h | 13 +-
include/configs/omap3_beagle.h | 3 +
include/configs/omap3_zoom2.h | 237 --
include/configs/omap4_common.h | 11 +-
include/configs/palmld.h | 10 +-
include/configs/palmtc.h | 10 +-
include/configs/scb9328.h | 6 +-
include/configs/siemens-am33x-common.h | 2 +-
include/configs/smdk5420.h | 56 +
include/configs/tam3517-common.h | 1 +
include/configs/tao3530.h | 363 +++
include/configs/tec-ng.h | 84 +
include/configs/tegra114-common.h | 1 +
include/configs/tegra30-common.h | 1 +
include/configs/titanium.h | 1 +
include/configs/trats2.h | 3 +-
include/configs/twister.h | 3 +
include/configs/udoo.h | 31 +-
include/configs/vexpress_aemv8a.h | 189 ++
include/configs/wandboard.h | 3 +-
include/configs/zipitz2.h | 10 +-
include/configs/zynq-common.h | 238 ++
include/configs/zynq.h | 139 -
include/configs/zynq_microzed.h | 26 +
include/configs/zynq_zc70x.h | 29 +
include/configs/zynq_zc770.h | 42 +
include/configs/zynq_zed.h | 27 +
include/image.h | 1 +
include/linux/linkage.h | 4 +
mkconfig | 7 +
spl/Makefile | 7 +-
tools/Makefile | 9 +-
tools/mkexynosspl.c | 167 +-
tools/mxsimage.c | 1 +
tools/relocate-rela.c | 189 ++
261 files changed, 14926 insertions(+), 6628 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/generic_timer.c
create mode 100644 arch/arm/cpu/armv8/gic.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/transition.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/dts/exynos5.dtsi
create mode 100644 arch/arm/dts/exynos5420.dtsi
create mode 100644 arch/arm/dts/zynq-7000.dtsi
create mode 100644 arch/arm/imx-common/sata.c
create mode 100644 arch/arm/include/asm/arch-exynos/board.h
create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
create mode 100644 arch/arm/include/asm/armv8/mmu.h
create mode 100644 arch/arm/include/asm/imx-common/sata.h
create mode 100644 arch/arm/lib/crt0_64.S
create mode 100644 arch/arm/lib/interrupts_64.c
create mode 100644 arch/arm/lib/relocate_64.S
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 board/avionic-design/common/pinmux-config-tamonten-ng.h
create mode 100644 board/avionic-design/common/tamonten-ng.c
create mode 100644 board/avionic-design/dts/tegra30-tamonten.dtsi
create mode 100644 board/avionic-design/dts/tegra30-tec-ng.dts
create mode 100644 board/avionic-design/tec-ng/Makefile
rename board/{freescale => barco}/titanium/Makefile (100%)
rename board/{freescale => barco}/titanium/imximage.cfg (100%)
rename board/{freescale => barco}/titanium/titanium.c (66%)
delete mode 100644 board/logicpd/zoom2/Makefile
delete mode 100644 board/logicpd/zoom2/config.mk
delete mode 100644 board/logicpd/zoom2/debug_board.c
delete mode 100644 board/logicpd/zoom2/led.c
delete mode 100644 board/logicpd/zoom2/zoom2.c
delete mode 100644 board/logicpd/zoom2/zoom2.h
delete mode 100644 board/logicpd/zoom2/zoom2_serial.c
delete mode 100644 board/logicpd/zoom2/zoom2_serial.h
create mode 100644 board/samsung/common/board.c
create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
create mode 100644 board/samsung/smdk5420/Makefile
create mode 100644 board/samsung/smdk5420/smdk5420.c
create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
create mode 100644 board/technexion/tao3530/Makefile
create mode 100644 board/technexion/tao3530/tao3530.c
create mode 100644 board/technexion/tao3530/tao3530.h
create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
create mode 100644 board/udoo/clocks.cfg
create mode 100644 board/udoo/ddr-setup.cfg
create mode 100644 board/udoo/udoo.cfg
create mode 100644 board/xilinx/dts/zynq-microzed.dts
create mode 100644 board/xilinx/dts/zynq-zc702.dts
create mode 100644 board/xilinx/dts/zynq-zc706.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
create mode 100644 board/xilinx/dts/zynq-zed.dts
create mode 100644 doc/README.arm64
create mode 100644 doc/README.zynq
create mode 100644 include/configs/exynos5-dt.h
delete mode 100644 include/configs/omap3_zoom2.h
create mode 100644 include/configs/smdk5420.h
create mode 100644 include/configs/tao3530.h
create mode 100644 include/configs/tec-ng.h
create mode 100644 include/configs/vexpress_aemv8a.h
create mode 100644 include/configs/zynq-common.h
delete mode 100644 include/configs/zynq.h
create mode 100644 include/configs/zynq_microzed.h
create mode 100644 include/configs/zynq_zc70x.h
create mode 100644 include/configs/zynq_zc770.h
create mode 100644 include/configs/zynq_zed.h
create mode 100644 tools/relocate-rela.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-12-10 22:05 Albert ARIBAUD
@ 2013-12-11 16:44 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-12-11 16:44 UTC (permalink / raw)
To: u-boot
On Tue, Dec 10, 2013 at 11:05:27PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> f44483b57c49282299da0e5c10073b909cdad979:
>
> Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
> (2013-12-02 08:48:02 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to f15ea6e1d67782a1626d4a4922b6c20e380085e5:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-12-10
> 22:23:59 +0100)
>
> Note: two in-merge fixes were necessary. They are listed in
> f15ea6e1.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (7):
> Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> arm: keep all sections in ELF file
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Andreas Bie??mann (10):
> video: remove AT91 legacy API from bus_vcxk
> i2c: switch from AT91 legacy to ATMEL legacy
> at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
> snapper9260: remove unused AT91_LEGACY
> net: remove unused CONFIG_AT91_LEGACY
> at91: remove all occourances of CONFIG_AT91_LEGACY
> at91: add new gpio pin definitions
> at91: redefine legacy GPIO PIN_BASE
> at91: nand: switch atmel_nand to generic GPIO API
> at91: switch coloured LED to gpio API
>
> Andrew Bradford (1):
> am335x_evm: Fix CONS_INDEX numbering
>
> Bo Shen (8):
> arm: atmel: sama5d3: correct the ID for DBGU and PIT
> arm: at91: pm9261: remove undefined bit in mckr
> arm: atmel: sama5d3: correct the error define of DIV
> arm: atmel: sama5d3: the offset of MULA is 18
> arm: atmel: sama5d3: early enable PIO peripherals
> arm: atmel: add ddr2 initialization function
> arm: atmel: sama5d3: spl boot from fat fs SD card
> arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper
> position
>
> Chin Liang See (1):
> socfpga: Adding Freeze Controller driver
>
> Hardik Patel (1):
> pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2
> RAM
>
> Heiko Schocher (6):
> bootcount: store bootcount var in environment
> arm, am33x: make RTC32K OSC enable configurable
> usb, g_dnl: make bcdDevice value configurable
> arm926ejs, at91: add common phy_reset function
> arm, at91: add Siemens board taurus and axm
> arm, at91: add siemens corvus board
>
> Ian Campbell (1):
> vexpress: use correct timer address on extended memory map systems
>
> Igor Grinberg (1):
> cm-t35: use gpio_led driver for status led
>
> Ilya Ledvich (3):
> cm_t335: add cm_t335 board support
> cm_t335: add support for status LED
> cm_t335: add support for pca9555 i2c gpio extender
>
> Jaehoon Chung (3):
> arm: exynos: fix set_mmc_clk for exynos4x12
> arm: exynos/goni: fix the return type for s5p_mmc_init
> arm: exynos: remove the unused define.
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: eb_cpux9k2: config clean up
>
> Lars Poeschel (1):
> pcm051: Support for revision 3
>
> Lokesh Vutla (1):
> ARM: OMAP5+: Remove unnecessary EFUSE settings
>
> Lubomir Popov (1):
> ARM: OMAP4: Fix bug in omap4470_volts struct
>
> Luka Perkov (1):
> config: arm: exynos5250: remove duplicate defines
>
> Masahiro Yamada (1):
> ARM: align MVBAR on 32 byte boundary
>
> Mateusz Kulikowski (1):
> arm: at91: support for the Calao USB-A9263 board (based on
> AT91SAM9263)
>
> Matt Porter (1):
> boards.cfg: update email address for ti814x_evm maintainer
>
> Michael Trimarchi (2):
> arm: omap3: Add uart4 omap3 adddress
> arm: omap3: Enable clocks for peripherals only if they are used
>
> Michal Simek (1):
> arm: zynq: Do not remap OCM to high address
>
> Minkyu Kang (3):
> arm: exynos: fix the align for exynos4_power structure
> arm: exynos: adds ifdef for spi boot
> arm: arndale: disable spi boot
>
> Nobuhiro Iwamatsu (7):
> arm: rmobile: Move lowlevel_init.o to taget of each CPU
> arm: rmobile: Add support R8A7790
> arm: rmobile: Add support lager board
> arm: rmobile: Add support R8A7791
> arm: rmobile: Add support koelsch board
> arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error
> arm: rmobile: Remove config.mk
>
> Oleg Kosheliev (2):
> ARMV7: OMAP4: Add struct for twl603x data
> ARMV7: OMAP4: Add twl6032 support
>
> Piotr Wilczek (7):
> driver:usb:s3c_udc: add support for Exynos4x12
> trats2: enable ums support on Trats2
> trats2: enable dfu and thor protocol for Tizen download
> board: trats2: remove unused defines from config file
> board: trats2: fix environmental variables
> board: trats2: fix access to samsung registers
> board: trats2: update Tizen partition definitions
>
> Przemyslaw Marczak (1):
> trats: usb: Add usb_cable_connected() function
>
> Radhey Shyam Pandey (1):
> arm: zynq : Revert TZ_DDR_RAM to secure.
>
> Rajeshwari Shinde (1):
> exynos: spl: Add a custom spi copy function
>
> Roger Quadros (11):
> ahci: Error out with message on malloc() failure
> ahci: Fix cache align error messages
> ARM: OMAP5: Add Pipe3 PHY driver
> ARM: OMAP5: Add PRCM and Control information for SATA
> ARM: OMAP5: Add SATA platform glue
> ARM: omap5_uevm: Add SATA support
> ARM: DRA7xx: Add PRCM and Control information for SATA
> ARM: dra7_evm: Add SATA support
> usb: ehci-omap: Reset the USB Host OMAP module
> omap3_beagle: Don't use ulpi_reset
> omap4_panda: Don't use ulpi_reset
>
> SRICHARAN R (3):
> ARM: DRA7: Add is_dra7xx cpu check definition
> ARM: DRA: EMIF: Change DDR3 settings to use hw leveling
> ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039
>
> Samuel Egli (1):
> arm, am335x: update for the siemens boards
>
> Soren Brinkmann (1):
> serial: zynq: Remove unused #defines
>
> Stefan Roese (1):
> arm: am335x: Add DT (FDT) support to Siemens boards
>
> Tom Rini (5):
> am33xx: Make SoC bootcount driver have its own symbol
> omap730p2: Remove board
> am33xx: Stop modifying certain EMIF4D registers
> am335x_evm: Update nandboot to use partitions and DT
> AM3517 EVM: Enable ethernet
>
> Viktar Palstsiuk (1):
> davinci: fix Master Priority Registers location
>
> Vladimir Koutny (1):
> am335x: cpsw: optimize cpsw_recv to increase network performance
>
> Wu, Josh (1):
> ARM: at91: sama5d3: add support for sama5d36 chip
>
> Makefile | 2 +-
> README | 19 +
> arch/arm/config.mk | 3 +
> arch/arm/cpu/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/led.c | 16 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 16 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 16 +-
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/am33xx/board.c | 4 +
> arch/arm/cpu/armv7/am33xx/ddr.c | 7 -
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 6 +-
> arch/arm/cpu/armv7/at91/timer.c | 2 +-
> arch/arm/cpu/armv7/exynos/clock.c | 3 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 2 +-
> arch/arm/cpu/armv7/exynos/spl_boot.c | 126 +-
> arch/arm/cpu/armv7/nonsec_virt.S | 2 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 5 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 142 ++-
> arch/arm/cpu/armv7/omap-common/pipe3-phy.c | 231 ++++
> arch/arm/cpu/armv7/omap-common/pipe3-phy.h | 36 +
> arch/arm/cpu/armv7/omap-common/sata.c | 75 ++
> arch/arm/cpu/armv7/omap3/clock.c | 2 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 12 +-
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 9 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 9 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 18 +-
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 7 +
> arch/arm/cpu/armv7/omap5/sdram.c | 214 +++-
> arch/arm/cpu/armv7/rmobile/Makefile | 11 +-
> arch/arm/cpu/armv7/rmobile/config.mk | 9 -
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c | 22 +
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c | 29 +
> arch/arm/cpu/armv7/rmobile/cpu_info.c | 10 +
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 60 +
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c | 829 +++++++++++++
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h | 92 ++
> arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 1117
> ++++++++++++++++++ arch/arm/cpu/armv7/rmobile/timer.c
> | 8 +- arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/freeze_controller.c | 215 ++++
> arch/arm/cpu/armv7/socfpga/spl.c | 9 +
> arch/arm/cpu/armv7/zynq/cpu.c | 9 +-
> arch/arm/cpu/at91-common/Makefile | 12 +
> arch/arm/cpu/at91-common/mpddrc.c | 124 ++
> arch/arm/cpu/at91-common/phy.c | 57 +
> arch/arm/cpu/at91-common/spl.c | 90 ++
> arch/arm/cpu/at91-common/u-boot-spl.lds | 50 +
> arch/arm/cpu/ixp/u-boot.lds | 15 +-
> arch/arm/cpu/u-boot-spl.lds | 15 +-
> arch/arm/cpu/u-boot.lds | 18 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 37 +-
> arch/arm/include/asm/arch-at91/at91_common.h | 5 +
> arch/arm/include/asm/arch-at91/at91_pio.h | 33 -
> arch/arm/include/asm/arch-at91/at91_pit.h | 16 -
> arch/arm/include/asm/arch-at91/at91_pmc.h | 59 +-
> arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
> arch/arm/include/asm/arch-at91/at91_wdt.h | 21 -
> arch/arm/include/asm/arch-at91/at91cap9.h | 69 --
> arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 -
> arch/arm/include/asm/arch-at91/atmel_mpddrc.h | 115 ++
> arch/arm/include/asm/arch-at91/gpio.h | 26 +-
> arch/arm/include/asm/arch-at91/sama5d3.h | 3 +
> arch/arm/include/asm/arch-at91/spl.h | 20 +
> arch/arm/include/asm/arch-davinci/hardware.h | 3 +-
> arch/arm/include/asm/arch-exynos/dwmmc.h | 4 -
> arch/arm/include/asm/arch-exynos/mmc.h | 2 +-
> arch/arm/include/asm/arch-exynos/power.h | 2 +-
> arch/arm/include/asm/arch-exynos/spi.h | 1 +
> arch/arm/include/asm/arch-omap3/clock.h | 2 -
> arch/arm/include/asm/arch-omap3/omap3.h | 1 +
> arch/arm/include/asm/arch-omap4/sys_proto.h | 4 +
> arch/arm/include/asm/arch-omap5/clock.h | 3 +
> arch/arm/include/asm/arch-omap5/omap.h | 4 +
> arch/arm/include/asm/arch-omap5/sata.h | 48 +
> arch/arm/include/asm/arch-rmobile/gpio.h | 6 +
> arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h | 387 +++++++
> arch/arm/include/asm/arch-rmobile/r8a7790.h | 614 ++++++++++
> arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 438 +++++++
> arch/arm/include/asm/arch-rmobile/r8a7791.h | 664 +++++++++++
> arch/arm/include/asm/arch-rmobile/rmobile.h | 4 +
> arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +-
> .../include/asm/arch-socfpga/freeze_controller.h | 50 +
> arch/arm/include/asm/emif.h | 14 +-
> arch/arm/include/asm/omap_common.h | 10 +
> board/BuS/vl_ma2sc/vl_ma2sc.c | 23 +-
> board/actux1/u-boot.lds | 15 +-
> board/actux2/u-boot.lds | 15 +-
> board/actux3/u-boot.lds | 15 +-
> board/afeb9260/afeb9260.c | 18 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +-
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +-
> board/atmel/sama5d3xek/sama5d3xek.c | 91 ++
> board/bluewater/snapper9260/snapper9260.c | 16 +-
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +-
> board/calao/usb_a9263/Makefile | 14 +
> board/calao/usb_a9263/usb_a9263.c | 148 +++
> board/compulab/cm_t335/Makefile | 10 +
> board/compulab/cm_t335/cm_t335.c | 162 +++
> board/compulab/cm_t335/mux.c | 117 ++
> board/compulab/cm_t335/spl.c | 106 ++
> board/compulab/cm_t335/u-boot.lds | 101 ++
> board/compulab/cm_t35/Makefile | 2 +-
> board/compulab/cm_t35/leds.c | 33 -
> board/dvlhost/u-boot.lds | 15 +-
> board/egnite/ethernut5/ethernut5.c | 3 +-
> board/esd/meesc/meesc.c | 5 +-
> board/esd/otc570/otc570.c | 5 +-
> board/eukrea/cpu9260/cpu9260.c | 23 +-
> board/freescale/mx31ads/u-boot.lds | 18 +-
> board/isee/igep0033/board.c | 4 -
> board/phytec/pcm051/board.c | 53 +-
> board/renesas/koelsch/Makefile | 9 +
> board/renesas/koelsch/koelsch.c | 283 +++++
> board/renesas/koelsch/qos.c | 1220
> ++++++++++++++++++++
> board/renesas/koelsch/qos.h | 12 +
> board/renesas/lager/Makefile | 9 +
> board/renesas/lager/lager.c | 287 +++++
> board/renesas/lager/qos.c | 1119
> ++++++++++++++++++ board/renesas/lager/qos.h
> | 12 + board/ronetix/pm9261/led.c | 14 +-
> board/ronetix/pm9261/pm9261.c | 5 +-
> board/ronetix/pm9263/led.c | 10 +-
> board/ronetix/pm9263/pm9263.c | 5 +-
> board/ronetix/pm9g45/pm9g45.c | 5 +-
> board/samsung/trats/trats.c | 11 +
> board/samsung/trats2/trats2.c | 108 +-
> board/siemens/common/factoryset.c | 24 +-
> board/siemens/common/factoryset.h | 2 +
> board/siemens/corvus/Makefile | 18 +
> board/siemens/corvus/board.c | 195 ++++
> board/siemens/dxr2/board.c | 15 +-
> board/siemens/dxr2/board.h | 9 +-
> board/siemens/dxr2/mux.c | 158 +++
> board/siemens/pxm2/board.c | 8 +-
> board/siemens/rut/board.c | 56 +-
> board/siemens/taurus/Makefile | 18 +
> board/siemens/taurus/taurus.c | 160 +++
> board/taskit/stamp9g20/stamp9g20.c | 31 +-
> board/ti/am335x/board.c | 17 -
> board/ti/am335x/u-boot.lds | 15 +-
> board/ti/dra7xx/evm.c | 7 +
> board/ti/omap5_uevm/evm.c | 7 +
> board/ti/omap730p2/Makefile | 9 -
> board/ti/omap730p2/README.omap730p2 | 91 --
> board/ti/omap730p2/config.mk | 25 -
> board/ti/omap730p2/flash.c | 463 --------
> board/ti/omap730p2/lowlevel_init.S | 379 ------
> board/ti/omap730p2/omap730p2.c | 255 ----
> board/ti/panda/panda.c | 60 +
> board/ti/ti814x/evm.c | 5 -
> board/ti/ti816x/evm.c | 17 -
> board/vpac270/u-boot-spl.lds | 18 +-
> boards.cfg | 27 +-
> doc/README.at91-soc | 7 +
> doc/README.scrapyard | 5 +-
> drivers/block/ahci.c | 18 +-
> drivers/bootcount/Makefile | 3 +-
> drivers/bootcount/bootcount_davinci.c | 4 +
> drivers/bootcount/bootcount_env.c | 29 +
> drivers/gpio/at91_gpio.c | 4 +-
> drivers/i2c/soft_i2c.c | 2 +-
> drivers/mtd/nand/atmel_nand.c | 8 +-
> drivers/net/at91_emac.c | 9 -
> drivers/net/cpsw.c | 2 +-
> drivers/power/twl6030.c | 77 +-
> drivers/usb/gadget/g_dnl.c | 23 +-
> drivers/usb/gadget/regs-otg.h | 5 +
> drivers/usb/gadget/s3c_udc_otg.c | 9 +-
> drivers/usb/host/ehci-omap.c | 57 +-
> drivers/video/bus_vcxk.c | 15 -
> include/configs/afeb9260.h | 2 +-
> include/configs/am335x_evm.h | 13 +-
> include/configs/am3517_evm.h | 14 +-
> include/configs/arndale.h | 4 -
> include/configs/at91sam9260ek.h | 1 +
> include/configs/at91sam9263ek.h | 1 +
> include/configs/at91sam9m10g45ek.h | 9 +-
> include/configs/at91sam9n12ek.h | 4 +-
> include/configs/cm_t335.h | 182 +++
> include/configs/cm_t35.h | 9 +-
> include/configs/corvus.h | 165 +++
> include/configs/cpu9260.h | 5 +-
> include/configs/dra7xx_evm.h | 11 +
> include/configs/dxr2.h | 13 +-
> include/configs/eb_cpux9k2.h | 4 -
> include/configs/ethernut5.h | 2 +-
> include/configs/exynos5250-dt.h | 25 +-
> include/configs/h2_p2_dbg_board.h | 120 --
> include/configs/koelsch.h | 133 +++
> include/configs/lager.h | 141 +++
> include/configs/meesc.h | 4 +-
> include/configs/omap3_beagle.h | 3 -
> include/configs/omap4_panda.h | 3 -
> include/configs/omap5_uevm.h | 10 +
> include/configs/omap730.h | 246 ----
> include/configs/omap730p2.h | 173 ---
> include/configs/otc570.h | 4 +-
> include/configs/pm9261.h | 16 +-
> include/configs/pm9263.h | 8 +-
> include/configs/pm9g45.h | 8 +-
> include/configs/pxm2.h | 7 +-
> include/configs/rut.h | 10 +-
> include/configs/sama5d3xek.h | 34 +
> include/configs/sbc35_a9g20.h | 1 +
> include/configs/siemens-am33x-common.h | 74 +-
> include/configs/snapper9260.h | 2 +-
> include/configs/stamp9g20.h | 1 +
> include/configs/taurus.h | 160 +++
> include/configs/ti_am335x_common.h | 5 +-
> include/configs/trats.h | 1 +
> include/configs/trats2.h | 68 +-
> include/configs/usb_a9263.h | 169 +++
> include/configs/vexpress_common.h | 2 +-
> include/configs/vl_ma2sc.h | 5 +-
> include/i2c.h | 2 +-
> include/twl6030.h | 38 + 217 files
> changed, 12160 insertions(+), 2834 deletions(-) create mode 100644
> arch/arm/cpu/armv7/omap-common/pipe3-phy.c create mode 100644
> arch/arm/cpu/armv7/omap-common/pipe3-phy.h create mode 100644
> arch/arm/cpu/armv7/omap-common/sata.c delete mode 100644
> arch/arm/cpu/armv7/rmobile/config.mk create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c create mode 100644
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c create mode 100644
> arch/arm/cpu/armv7/socfpga/freeze_controller.c create mode 100644
> arch/arm/cpu/at91-common/Makefile create mode 100644
> arch/arm/cpu/at91-common/mpddrc.c create mode 100644
> arch/arm/cpu/at91-common/phy.c create mode 100644
> arch/arm/cpu/at91-common/spl.c create mode 100644
> arch/arm/cpu/at91-common/u-boot-spl.lds create mode 100644
> arch/arm/include/asm/arch-at91/atmel_mpddrc.h create mode 100644
> arch/arm/include/asm/arch-at91/spl.h create mode 100644
> arch/arm/include/asm/arch-omap5/sata.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7790.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7791.h create mode 100644
> arch/arm/include/asm/arch-socfpga/freeze_controller.h create mode
> 100644 board/calao/usb_a9263/Makefile create mode 100644
> board/calao/usb_a9263/usb_a9263.c create mode 100644
> board/compulab/cm_t335/Makefile create mode 100644
> board/compulab/cm_t335/cm_t335.c create mode 100644
> board/compulab/cm_t335/mux.c create mode 100644
> board/compulab/cm_t335/spl.c create mode 100644
> board/compulab/cm_t335/u-boot.lds delete mode 100644
> board/compulab/cm_t35/leds.c create mode 100644
> board/renesas/koelsch/Makefile create mode 100644
> board/renesas/koelsch/koelsch.c create mode 100644
> board/renesas/koelsch/qos.c create mode 100644
> board/renesas/koelsch/qos.h create mode 100644
> board/renesas/lager/Makefile create mode 100644
> board/renesas/lager/lager.c create mode 100644
> board/renesas/lager/qos.c create mode 100644 board/renesas/lager/qos.h
> create mode 100644 board/siemens/corvus/Makefile
> create mode 100644 board/siemens/corvus/board.c
> create mode 100644 board/siemens/taurus/Makefile
> create mode 100644 board/siemens/taurus/taurus.c
> delete mode 100644 board/ti/omap730p2/Makefile
> delete mode 100644 board/ti/omap730p2/README.omap730p2
> delete mode 100644 board/ti/omap730p2/config.mk
> delete mode 100644 board/ti/omap730p2/flash.c
> delete mode 100644 board/ti/omap730p2/lowlevel_init.S
> delete mode 100644 board/ti/omap730p2/omap730p2.c
> create mode 100644 drivers/bootcount/bootcount_env.c
> create mode 100644 include/configs/cm_t335.h
> create mode 100644 include/configs/corvus.h
> delete mode 100644 include/configs/h2_p2_dbg_board.h
> create mode 100644 include/configs/koelsch.h
> create mode 100644 include/configs/lager.h
> delete mode 100644 include/configs/omap730.h
> delete mode 100644 include/configs/omap730p2.h
> create mode 100644 include/configs/taurus.h
> create mode 100644 include/configs/usb_a9263.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131211/d16bcd6a/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-12-10 22:05 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
f44483b57c49282299da0e5c10073b909cdad979:
Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
(2013-12-02 08:48:02 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to f15ea6e1d67782a1626d4a4922b6c20e380085e5:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-12-10
22:23:59 +0100)
Note: two in-merge fixes were necessary. They are listed in
f15ea6e1.
----------------------------------------------------------------
Albert ARIBAUD (7):
Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
arm: keep all sections in ELF file
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Andreas Bie?mann (10):
video: remove AT91 legacy API from bus_vcxk
i2c: switch from AT91 legacy to ATMEL legacy
at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
snapper9260: remove unused AT91_LEGACY
net: remove unused CONFIG_AT91_LEGACY
at91: remove all occourances of CONFIG_AT91_LEGACY
at91: add new gpio pin definitions
at91: redefine legacy GPIO PIN_BASE
at91: nand: switch atmel_nand to generic GPIO API
at91: switch coloured LED to gpio API
Andrew Bradford (1):
am335x_evm: Fix CONS_INDEX numbering
Bo Shen (8):
arm: atmel: sama5d3: correct the ID for DBGU and PIT
arm: at91: pm9261: remove undefined bit in mckr
arm: atmel: sama5d3: correct the error define of DIV
arm: atmel: sama5d3: the offset of MULA is 18
arm: atmel: sama5d3: early enable PIO peripherals
arm: atmel: add ddr2 initialization function
arm: atmel: sama5d3: spl boot from fat fs SD card
arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper
position
Chin Liang See (1):
socfpga: Adding Freeze Controller driver
Hardik Patel (1):
pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2
RAM
Heiko Schocher (6):
bootcount: store bootcount var in environment
arm, am33x: make RTC32K OSC enable configurable
usb, g_dnl: make bcdDevice value configurable
arm926ejs, at91: add common phy_reset function
arm, at91: add Siemens board taurus and axm
arm, at91: add siemens corvus board
Ian Campbell (1):
vexpress: use correct timer address on extended memory map systems
Igor Grinberg (1):
cm-t35: use gpio_led driver for status led
Ilya Ledvich (3):
cm_t335: add cm_t335 board support
cm_t335: add support for status LED
cm_t335: add support for pca9555 i2c gpio extender
Jaehoon Chung (3):
arm: exynos: fix set_mmc_clk for exynos4x12
arm: exynos/goni: fix the return type for s5p_mmc_init
arm: exynos: remove the unused define.
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: eb_cpux9k2: config clean up
Lars Poeschel (1):
pcm051: Support for revision 3
Lokesh Vutla (1):
ARM: OMAP5+: Remove unnecessary EFUSE settings
Lubomir Popov (1):
ARM: OMAP4: Fix bug in omap4470_volts struct
Luka Perkov (1):
config: arm: exynos5250: remove duplicate defines
Masahiro Yamada (1):
ARM: align MVBAR on 32 byte boundary
Mateusz Kulikowski (1):
arm: at91: support for the Calao USB-A9263 board (based on
AT91SAM9263)
Matt Porter (1):
boards.cfg: update email address for ti814x_evm maintainer
Michael Trimarchi (2):
arm: omap3: Add uart4 omap3 adddress
arm: omap3: Enable clocks for peripherals only if they are used
Michal Simek (1):
arm: zynq: Do not remap OCM to high address
Minkyu Kang (3):
arm: exynos: fix the align for exynos4_power structure
arm: exynos: adds ifdef for spi boot
arm: arndale: disable spi boot
Nobuhiro Iwamatsu (7):
arm: rmobile: Move lowlevel_init.o to taget of each CPU
arm: rmobile: Add support R8A7790
arm: rmobile: Add support lager board
arm: rmobile: Add support R8A7791
arm: rmobile: Add support koelsch board
arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error
arm: rmobile: Remove config.mk
Oleg Kosheliev (2):
ARMV7: OMAP4: Add struct for twl603x data
ARMV7: OMAP4: Add twl6032 support
Piotr Wilczek (7):
driver:usb:s3c_udc: add support for Exynos4x12
trats2: enable ums support on Trats2
trats2: enable dfu and thor protocol for Tizen download
board: trats2: remove unused defines from config file
board: trats2: fix environmental variables
board: trats2: fix access to samsung registers
board: trats2: update Tizen partition definitions
Przemyslaw Marczak (1):
trats: usb: Add usb_cable_connected() function
Radhey Shyam Pandey (1):
arm: zynq : Revert TZ_DDR_RAM to secure.
Rajeshwari Shinde (1):
exynos: spl: Add a custom spi copy function
Roger Quadros (11):
ahci: Error out with message on malloc() failure
ahci: Fix cache align error messages
ARM: OMAP5: Add Pipe3 PHY driver
ARM: OMAP5: Add PRCM and Control information for SATA
ARM: OMAP5: Add SATA platform glue
ARM: omap5_uevm: Add SATA support
ARM: DRA7xx: Add PRCM and Control information for SATA
ARM: dra7_evm: Add SATA support
usb: ehci-omap: Reset the USB Host OMAP module
omap3_beagle: Don't use ulpi_reset
omap4_panda: Don't use ulpi_reset
SRICHARAN R (3):
ARM: DRA7: Add is_dra7xx cpu check definition
ARM: DRA: EMIF: Change DDR3 settings to use hw leveling
ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039
Samuel Egli (1):
arm, am335x: update for the siemens boards
Soren Brinkmann (1):
serial: zynq: Remove unused #defines
Stefan Roese (1):
arm: am335x: Add DT (FDT) support to Siemens boards
Tom Rini (5):
am33xx: Make SoC bootcount driver have its own symbol
omap730p2: Remove board
am33xx: Stop modifying certain EMIF4D registers
am335x_evm: Update nandboot to use partitions and DT
AM3517 EVM: Enable ethernet
Viktar Palstsiuk (1):
davinci: fix Master Priority Registers location
Vladimir Koutny (1):
am335x: cpsw: optimize cpsw_recv to increase network performance
Wu, Josh (1):
ARM: at91: sama5d3: add support for sama5d36 chip
Makefile | 2 +-
README | 19 +
arch/arm/config.mk | 3 +
arch/arm/cpu/Makefile | 1 +
arch/arm/cpu/arm926ejs/at91/led.c | 16 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 16 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 16 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/am33xx/board.c | 4 +
arch/arm/cpu/armv7/am33xx/ddr.c | 7 -
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 6 +-
arch/arm/cpu/armv7/at91/timer.c | 2 +-
arch/arm/cpu/armv7/exynos/clock.c | 3 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 2 +-
arch/arm/cpu/armv7/exynos/spl_boot.c | 126 +-
arch/arm/cpu/armv7/nonsec_virt.S | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 5 +
arch/arm/cpu/armv7/omap-common/emif-common.c | 142 ++-
arch/arm/cpu/armv7/omap-common/pipe3-phy.c | 231 ++++
arch/arm/cpu/armv7/omap-common/pipe3-phy.h | 36 +
arch/arm/cpu/armv7/omap-common/sata.c | 75 ++
arch/arm/cpu/armv7/omap3/clock.c | 2 -
arch/arm/cpu/armv7/omap4/hw_data.c | 12 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 9 +-
arch/arm/cpu/armv7/omap5/hw_data.c | 9 +-
arch/arm/cpu/armv7/omap5/hwinit.c | 18 +-
arch/arm/cpu/armv7/omap5/prcm-regs.c | 7 +
arch/arm/cpu/armv7/omap5/sdram.c | 214 +++-
arch/arm/cpu/armv7/rmobile/Makefile | 11 +-
arch/arm/cpu/armv7/rmobile/config.mk | 9 -
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c | 22 +
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c | 29 +
arch/arm/cpu/armv7/rmobile/cpu_info.c | 10 +
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 60 +
arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c | 829 +++++++++++++
arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h | 92 ++
arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 1117
++++++++++++++++++ arch/arm/cpu/armv7/rmobile/timer.c
| 8 +- arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
arch/arm/cpu/armv7/socfpga/freeze_controller.c | 215 ++++
arch/arm/cpu/armv7/socfpga/spl.c | 9 +
arch/arm/cpu/armv7/zynq/cpu.c | 9 +-
arch/arm/cpu/at91-common/Makefile | 12 +
arch/arm/cpu/at91-common/mpddrc.c | 124 ++
arch/arm/cpu/at91-common/phy.c | 57 +
arch/arm/cpu/at91-common/spl.c | 90 ++
arch/arm/cpu/at91-common/u-boot-spl.lds | 50 +
arch/arm/cpu/ixp/u-boot.lds | 15 +-
arch/arm/cpu/u-boot-spl.lds | 15 +-
arch/arm/cpu/u-boot.lds | 18 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 37 +-
arch/arm/include/asm/arch-at91/at91_common.h | 5 +
arch/arm/include/asm/arch-at91/at91_pio.h | 33 -
arch/arm/include/asm/arch-at91/at91_pit.h | 16 -
arch/arm/include/asm/arch-at91/at91_pmc.h | 59 +-
arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
arch/arm/include/asm/arch-at91/at91_wdt.h | 21 -
arch/arm/include/asm/arch-at91/at91cap9.h | 69 --
arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 -
arch/arm/include/asm/arch-at91/atmel_mpddrc.h | 115 ++
arch/arm/include/asm/arch-at91/gpio.h | 26 +-
arch/arm/include/asm/arch-at91/sama5d3.h | 3 +
arch/arm/include/asm/arch-at91/spl.h | 20 +
arch/arm/include/asm/arch-davinci/hardware.h | 3 +-
arch/arm/include/asm/arch-exynos/dwmmc.h | 4 -
arch/arm/include/asm/arch-exynos/mmc.h | 2 +-
arch/arm/include/asm/arch-exynos/power.h | 2 +-
arch/arm/include/asm/arch-exynos/spi.h | 1 +
arch/arm/include/asm/arch-omap3/clock.h | 2 -
arch/arm/include/asm/arch-omap3/omap3.h | 1 +
arch/arm/include/asm/arch-omap4/sys_proto.h | 4 +
arch/arm/include/asm/arch-omap5/clock.h | 3 +
arch/arm/include/asm/arch-omap5/omap.h | 4 +
arch/arm/include/asm/arch-omap5/sata.h | 48 +
arch/arm/include/asm/arch-rmobile/gpio.h | 6 +
arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h | 387 +++++++
arch/arm/include/asm/arch-rmobile/r8a7790.h | 614 ++++++++++
arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 438 +++++++
arch/arm/include/asm/arch-rmobile/r8a7791.h | 664 +++++++++++
arch/arm/include/asm/arch-rmobile/rmobile.h | 4 +
arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +-
.../include/asm/arch-socfpga/freeze_controller.h | 50 +
arch/arm/include/asm/emif.h | 14 +-
arch/arm/include/asm/omap_common.h | 10 +
board/BuS/vl_ma2sc/vl_ma2sc.c | 23 +-
board/actux1/u-boot.lds | 15 +-
board/actux2/u-boot.lds | 15 +-
board/actux3/u-boot.lds | 15 +-
board/afeb9260/afeb9260.c | 18 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +-
board/atmel/sama5d3xek/sama5d3xek.c | 91 ++
board/bluewater/snapper9260/snapper9260.c | 16 +-
board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +-
board/calao/usb_a9263/Makefile | 14 +
board/calao/usb_a9263/usb_a9263.c | 148 +++
board/compulab/cm_t335/Makefile | 10 +
board/compulab/cm_t335/cm_t335.c | 162 +++
board/compulab/cm_t335/mux.c | 117 ++
board/compulab/cm_t335/spl.c | 106 ++
board/compulab/cm_t335/u-boot.lds | 101 ++
board/compulab/cm_t35/Makefile | 2 +-
board/compulab/cm_t35/leds.c | 33 -
board/dvlhost/u-boot.lds | 15 +-
board/egnite/ethernut5/ethernut5.c | 3 +-
board/esd/meesc/meesc.c | 5 +-
board/esd/otc570/otc570.c | 5 +-
board/eukrea/cpu9260/cpu9260.c | 23 +-
board/freescale/mx31ads/u-boot.lds | 18 +-
board/isee/igep0033/board.c | 4 -
board/phytec/pcm051/board.c | 53 +-
board/renesas/koelsch/Makefile | 9 +
board/renesas/koelsch/koelsch.c | 283 +++++
board/renesas/koelsch/qos.c | 1220
++++++++++++++++++++
board/renesas/koelsch/qos.h | 12 +
board/renesas/lager/Makefile | 9 +
board/renesas/lager/lager.c | 287 +++++
board/renesas/lager/qos.c | 1119
++++++++++++++++++ board/renesas/lager/qos.h
| 12 + board/ronetix/pm9261/led.c | 14 +-
board/ronetix/pm9261/pm9261.c | 5 +-
board/ronetix/pm9263/led.c | 10 +-
board/ronetix/pm9263/pm9263.c | 5 +-
board/ronetix/pm9g45/pm9g45.c | 5 +-
board/samsung/trats/trats.c | 11 +
board/samsung/trats2/trats2.c | 108 +-
board/siemens/common/factoryset.c | 24 +-
board/siemens/common/factoryset.h | 2 +
board/siemens/corvus/Makefile | 18 +
board/siemens/corvus/board.c | 195 ++++
board/siemens/dxr2/board.c | 15 +-
board/siemens/dxr2/board.h | 9 +-
board/siemens/dxr2/mux.c | 158 +++
board/siemens/pxm2/board.c | 8 +-
board/siemens/rut/board.c | 56 +-
board/siemens/taurus/Makefile | 18 +
board/siemens/taurus/taurus.c | 160 +++
board/taskit/stamp9g20/stamp9g20.c | 31 +-
board/ti/am335x/board.c | 17 -
board/ti/am335x/u-boot.lds | 15 +-
board/ti/dra7xx/evm.c | 7 +
board/ti/omap5_uevm/evm.c | 7 +
board/ti/omap730p2/Makefile | 9 -
board/ti/omap730p2/README.omap730p2 | 91 --
board/ti/omap730p2/config.mk | 25 -
board/ti/omap730p2/flash.c | 463 --------
board/ti/omap730p2/lowlevel_init.S | 379 ------
board/ti/omap730p2/omap730p2.c | 255 ----
board/ti/panda/panda.c | 60 +
board/ti/ti814x/evm.c | 5 -
board/ti/ti816x/evm.c | 17 -
board/vpac270/u-boot-spl.lds | 18 +-
boards.cfg | 27 +-
doc/README.at91-soc | 7 +
doc/README.scrapyard | 5 +-
drivers/block/ahci.c | 18 +-
drivers/bootcount/Makefile | 3 +-
drivers/bootcount/bootcount_davinci.c | 4 +
drivers/bootcount/bootcount_env.c | 29 +
drivers/gpio/at91_gpio.c | 4 +-
drivers/i2c/soft_i2c.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 8 +-
drivers/net/at91_emac.c | 9 -
drivers/net/cpsw.c | 2 +-
drivers/power/twl6030.c | 77 +-
drivers/usb/gadget/g_dnl.c | 23 +-
drivers/usb/gadget/regs-otg.h | 5 +
drivers/usb/gadget/s3c_udc_otg.c | 9 +-
drivers/usb/host/ehci-omap.c | 57 +-
drivers/video/bus_vcxk.c | 15 -
include/configs/afeb9260.h | 2 +-
include/configs/am335x_evm.h | 13 +-
include/configs/am3517_evm.h | 14 +-
include/configs/arndale.h | 4 -
include/configs/at91sam9260ek.h | 1 +
include/configs/at91sam9263ek.h | 1 +
include/configs/at91sam9m10g45ek.h | 9 +-
include/configs/at91sam9n12ek.h | 4 +-
include/configs/cm_t335.h | 182 +++
include/configs/cm_t35.h | 9 +-
include/configs/corvus.h | 165 +++
include/configs/cpu9260.h | 5 +-
include/configs/dra7xx_evm.h | 11 +
include/configs/dxr2.h | 13 +-
include/configs/eb_cpux9k2.h | 4 -
include/configs/ethernut5.h | 2 +-
include/configs/exynos5250-dt.h | 25 +-
include/configs/h2_p2_dbg_board.h | 120 --
include/configs/koelsch.h | 133 +++
include/configs/lager.h | 141 +++
include/configs/meesc.h | 4 +-
include/configs/omap3_beagle.h | 3 -
include/configs/omap4_panda.h | 3 -
include/configs/omap5_uevm.h | 10 +
include/configs/omap730.h | 246 ----
include/configs/omap730p2.h | 173 ---
include/configs/otc570.h | 4 +-
include/configs/pm9261.h | 16 +-
include/configs/pm9263.h | 8 +-
include/configs/pm9g45.h | 8 +-
include/configs/pxm2.h | 7 +-
include/configs/rut.h | 10 +-
include/configs/sama5d3xek.h | 34 +
include/configs/sbc35_a9g20.h | 1 +
include/configs/siemens-am33x-common.h | 74 +-
include/configs/snapper9260.h | 2 +-
include/configs/stamp9g20.h | 1 +
include/configs/taurus.h | 160 +++
include/configs/ti_am335x_common.h | 5 +-
include/configs/trats.h | 1 +
include/configs/trats2.h | 68 +-
include/configs/usb_a9263.h | 169 +++
include/configs/vexpress_common.h | 2 +-
include/configs/vl_ma2sc.h | 5 +-
include/i2c.h | 2 +-
include/twl6030.h | 38 + 217 files
changed, 12160 insertions(+), 2834 deletions(-) create mode 100644
arch/arm/cpu/armv7/omap-common/pipe3-phy.c create mode 100644
arch/arm/cpu/armv7/omap-common/pipe3-phy.h create mode 100644
arch/arm/cpu/armv7/omap-common/sata.c delete mode 100644
arch/arm/cpu/armv7/rmobile/config.mk create mode 100644
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c create mode 100644
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c create mode 100644
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c create mode 100644
arch/arm/cpu/armv7/socfpga/freeze_controller.c create mode 100644
arch/arm/cpu/at91-common/Makefile create mode 100644
arch/arm/cpu/at91-common/mpddrc.c create mode 100644
arch/arm/cpu/at91-common/phy.c create mode 100644
arch/arm/cpu/at91-common/spl.c create mode 100644
arch/arm/cpu/at91-common/u-boot-spl.lds create mode 100644
arch/arm/include/asm/arch-at91/atmel_mpddrc.h create mode 100644
arch/arm/include/asm/arch-at91/spl.h create mode 100644
arch/arm/include/asm/arch-omap5/sata.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7790.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7791.h create mode 100644
arch/arm/include/asm/arch-socfpga/freeze_controller.h create mode
100644 board/calao/usb_a9263/Makefile create mode 100644
board/calao/usb_a9263/usb_a9263.c create mode 100644
board/compulab/cm_t335/Makefile create mode 100644
board/compulab/cm_t335/cm_t335.c create mode 100644
board/compulab/cm_t335/mux.c create mode 100644
board/compulab/cm_t335/spl.c create mode 100644
board/compulab/cm_t335/u-boot.lds delete mode 100644
board/compulab/cm_t35/leds.c create mode 100644
board/renesas/koelsch/Makefile create mode 100644
board/renesas/koelsch/koelsch.c create mode 100644
board/renesas/koelsch/qos.c create mode 100644
board/renesas/koelsch/qos.h create mode 100644
board/renesas/lager/Makefile create mode 100644
board/renesas/lager/lager.c create mode 100644
board/renesas/lager/qos.c create mode 100644 board/renesas/lager/qos.h
create mode 100644 board/siemens/corvus/Makefile
create mode 100644 board/siemens/corvus/board.c
create mode 100644 board/siemens/taurus/Makefile
create mode 100644 board/siemens/taurus/taurus.c
delete mode 100644 board/ti/omap730p2/Makefile
delete mode 100644 board/ti/omap730p2/README.omap730p2
delete mode 100644 board/ti/omap730p2/config.mk
delete mode 100644 board/ti/omap730p2/flash.c
delete mode 100644 board/ti/omap730p2/lowlevel_init.S
delete mode 100644 board/ti/omap730p2/omap730p2.c
create mode 100644 drivers/bootcount/bootcount_env.c
create mode 100644 include/configs/cm_t335.h
create mode 100644 include/configs/corvus.h
delete mode 100644 include/configs/h2_p2_dbg_board.h
create mode 100644 include/configs/koelsch.h
create mode 100644 include/configs/lager.h
delete mode 100644 include/configs/omap730.h
delete mode 100644 include/configs/omap730p2.h
create mode 100644 include/configs/taurus.h
create mode 100644 include/configs/usb_a9263.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-11-09 22:53 Albert ARIBAUD
@ 2013-11-11 19:13 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-11-11 19:13 UTC (permalink / raw)
To: u-boot
On Sat, Nov 09, 2013 at 11:53:22PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 15c5cdf5aa6b292145e5e3e220ec1f42b11eff6f:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-usb (2013-11-08
> 15:25:29 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 85b8c5c4bf80025de4632ae6c9a8a606e51508a4:
>
> Merge branch 'iu-boot/master' into 'u-boot-arm/master' (2013-11-09
> 22:59:47 +0100)
>
> NOTE 1: the top of u-boot-arm/master is a merge from u-boot/master with
> non-trivial conflict resolutions, involving some changes to
> non-conflicting files too. See 'git show 85b8c5c4' for details.
>
> NOTE 2: eleven ARM targets fail with a warning about CONFIG_SYS_HZ:
> omap730p2_cs3boot omap730p2_cs0boot scb9328 palmtc balloon3
> mini2440 zipitz2 palmld omap730p2 omap3_zoom2 mx1ads. These
> failures already happen on u-boot/master and are thus not due
> to the ARM branch.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (3):
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'iu-boot/master' into 'u-boot-arm/master'
>
> Anatolij Gustschin (1):
> imx_watchdog: do not soft-reset while watchdog init
>
> Andreas Bie??mann (10):
> tricorder: update flash partitioning
> tricorder: use generic provided loadaddr
> tricorder: add configuration for a flashcard u-boot
> tricorder: add cmdline history
> tricorder: add mtdparts to environment
> tricorder: add tricordereeprom command
> tricorder: panic() on unknown board
> tricorder: add led support
> tricorder: read kernel directly from NAND
> tricorder: support 256MiB SDRAM on revision > D
>
> Bo Shen (3):
> net: macb: get DMA bus width from design config register
> arm: atmel: at91sam9n12ek: add usb host support
> arm: atmel: get rid of too many ifdeffery
>
> Christoph G. Baumann (1):
> ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900
>
> Eric Nelson (1):
> i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt
>
> Fabio Estevam (5):
> udoo: Add initial support for mx6q udoo board
> ARM: mx5: Enable L2 cache
> mx5: lowlevel_init: Remove unused macro
> configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
> wandboard: README: Include the quad version
>
> Heiko Schocher (2):
> nand, davinci: add special UBL ecc position
> arm, da85x: update for the ipam390 board
>
> Igor Grinberg (2):
> cm-t35: move the eeprom code to common place
> cm-t35: move the display code to common place
>
> Javier Martinez Canillas (2):
> ARM: IGEP0033: rename config file to am335x_igep0033.h
> OMAP3: igep00x0: rename config file to omap3_igep00x0.h
>
> Jens Scharsig (BuS Elektronik) (1):
> ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target
>
> Lokesh Vutla (1):
> ARM: OMAP4: Convert to ti_armv7_common.h
>
> Marek Vasut (4):
> ARM: mxs: tools: Use mkimage for BootStream generation
> ARM: mxs: Add PPC-AG BG0900 board
> ARM: mxs: Setup stack in JTAG mode
> ARM: mxs: Enable DCDC converter for battery boot
>
> Michal Simek (1):
> zynq: Use arch_cpu_init() instead of lowlevel_init()
>
> Minal Shah (1):
> dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build
>
> Nikita Kiryanov (3):
> cm_t35: reduce default bootdelay to 3 seconds
> cm_t35: turn on GPIO commands
> cm_t35: update lcd predefines
>
> Otavio Salvador (1):
> mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin
>
> Pierre Aubert (1):
> mx6: compute PLL PFD frequencies rather than using defines
>
> Roger Meier (1):
> at91: add defines for reset type
>
> SRICHARAN R (1):
> ARM: OMAP5: DDR3: Change io settings
>
> Stefan Roese (1):
> arm: Remove IXP425 boards pdnb3 and scpu
>
> Stefano Babic (1):
> Revert "configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL
> boards"
>
> Thomas Weber (3):
> tricorder: remove lcdmode from bootargs
> tricorder: Make u-boot faster
> tricorder: switch to alternative memtest
>
> Tom Rini (7):
> drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly
> am33xx, davinci: Create and use <asm/davinci_rtc.h>
> bootcount_davinci: Switch to scratch register #2
> TI:am33xx: Add bootcount support to ti_am335x_common.h
> am335x: Enable CONFIG_OMAP_WATCHDOG support
> TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address
> TI:omap5: Add rdaddr, use consistent loadaddr values
>
> arch/arm/cpu/arm926ejs/mxs/Makefile | 10 ++--
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 4 +-
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 4 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +
> arch/arm/cpu/arm926ejs/mxs/start.S | 9 +++
> arch/arm/cpu/armv7/am33xx/board.c | 7 ++-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 12 ++--
> arch/arm/cpu/armv7/mx6/clock.c | 56
> ++++++++++++++-----
> arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++
> arch/arm/cpu/armv7/zynq/cpu.c | 6 ++
> arch/arm/include/asm/arch-am33xx/cpu.h | 9 ---
> arch/arm/include/asm/arch-at91/at91_pmc.h | 2 +
> arch/arm/include/asm/arch-at91/at91_rstc.h | 7 +++
> arch/arm/include/asm/arch-davinci/hardware.h | 38
> -------------
> arch/arm/include/asm/arch-mx6/crm_regs.h | 11 ----
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +-
> arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +
> arch/arm/include/asm/arch-omap5/omap.h | 4 +-
> arch/arm/include/asm/arch-omap5/spl.h | 1 +
> arch/arm/include/asm/davinci_rtc.h | 52
> +++++++++++++++++
> board/Barix/ipam390/ipam390-ais-uart.cfg | 2 +-
> board/Barix/ipam390/ipam390.c | 29
> +++------- board/atmel/at91sam9n12ek/at91sam9n12ek.c
> | 11 ++++ board/boundary/nitrogen6x/6x_upgrade.txt
> | 2 +- board/compulab/cm_t35/Makefile
> | 3 - board/compulab/cm_t35/cm_t35.c
> | 7 +-- board/compulab/common/Makefile
> | 10 ++++ board/compulab/{cm_t35 => common}/eeprom.c
> | 51 +++++++++-------- board/compulab/{cm_t35 =>
> common}/eeprom.h | 8 +--
> board/compulab/{cm_t35/display.c => common/omap3_display.c} | 8 ++-
> board/corscience/tricorder/Makefile | 2 +-
> board/corscience/tricorder/led.c | 80
> +++++++++++++++++++++++++++
> board/corscience/tricorder/tricorder-eeprom.c | 251
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/corscience/tricorder/tricorder-eeprom.h | 41
> ++++++++++++++
> board/corscience/tricorder/tricorder.c | 126
> ++++++++++++++++++++++++++++++++++++++---
> board/corscience/tricorder/tricorder.h | 4 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 1 +
> board/{prodrive/pdnb3 => ppcag/bg0900}/Makefile | 8 ++-
> board/ppcag/bg0900/bg0900.c | 86
> ++++++++++++++++++++++++++++
> board/ppcag/bg0900/spl_boot.c | 153
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> board/prodrive/pdnb3/flash.c | 73
> ------------------------
> board/prodrive/pdnb3/nand.c | 129
> ------------------------------------------
> board/prodrive/pdnb3/pdnb3.c | 220
> ------------------------------------------------------------------------
> board/ti/am335x/board.c | 6 ++
> board/udoo/Makefile | 7 +++
> board/udoo/udoo.c | 110
> ++++++++++++++++++++++++++++++++++++
> board/wandboard/README | 4 +-
> boards.cfg | 20
> ++++--- doc/README.mxs |
> 39 ++++++++++---
> doc/README.scrapyard | 4 +-
> drivers/bootcount/Makefile | 1 +
> drivers/bootcount/bootcount_davinci.c | 13
> +++-- drivers/mtd/nand/davinci_nand.c |
> 12 ++++ drivers/net/macb.c |
> 20 ++++++- drivers/net/macb.h
> | 11 ++++ drivers/rtc/davinci.c
> | 8 +-- drivers/usb/host/ohci-at91.c
> | 19 ++++---
> drivers/watchdog/imx_watchdog.c | 3 +-
> include/configs/afeb9260.h | 1 +
> include/configs/{igep0033.h => am335x_igep0033.h} | 0
> include/configs/at91rm9200ek.h | 1 +
> include/configs/at91sam9260ek.h | 1 +
> include/configs/at91sam9261ek.h | 1 +
> include/configs/at91sam9263ek.h | 1 +
> include/configs/at91sam9n12ek.h | 13
> +++++ include/configs/at91sam9x5ek.h |
> 3 +- include/configs/bg0900.h | 97
> ++++++++++++++++++++++++++++++++
> include/configs/cm_t35.h | 3 +-
> include/configs/cpu9260.h | 1 +
> include/configs/cpuat91.h | 1 +
> include/configs/dra7xx_evm.h | 9 ++-
> include/configs/eb_cpux9k2.h | 4 +-
> include/configs/ethernut5.h | 1 +
> include/configs/ipam390.h | 35
> +++++++-----
> include/configs/meesc.h | 1 +
> include/configs/{igep00x0.h => omap3_igep00x0.h} | 0
> include/configs/omap4_common.h | 187
> +++++++++----------------------------------------------------
> include/configs/omap4_panda.h | 2 -
> include/configs/omap4_sdp4430.h | 2 -
> include/configs/omap5_common.h | 7 ++-
> include/configs/otc570.h | 1 +
> include/configs/pdnb3.h | 320
> ---------------------------------------------------------------------------------------------------------
> include/configs/pm9261.h | 1 +
> include/configs/pm9263.h | 1 +
> include/configs/pm9g45.h | 1 +
> include/configs/sama5d3xek.h | 1 +
> include/configs/sbc35_a9g20.h | 1 +
> include/configs/snapper9260.h | 1 +
> include/configs/stamp9g20.h | 1 +
> include/configs/ti_am335x_common.h | 14
> +++++ include/configs/ti_armv7_common.h |
> 2 +- include/configs/top9000.h | 1
> + include/configs/tricorder.h | 155
> ++++++++++++++++++++++++++++++++++++++-------------
> include/configs/udoo.h | 206
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/vl_ma2sc.h | 1 + 95
> files changed, 1730 insertions(+), 1172 deletions(-) create mode
> 100644 arch/arm/include/asm/davinci_rtc.h create mode 100644
> board/compulab/common/Makefile rename board/compulab/{cm_t35 =>
> common}/eeprom.c (60%) rename board/compulab/{cm_t35 =>
> common}/eeprom.h (62%) rename board/compulab/{cm_t35/display.c =>
> common/omap3_display.c} (97%) create mode 100644
> board/corscience/tricorder/led.c create mode 100644
> board/corscience/tricorder/tricorder-eeprom.c create mode 100644
> board/corscience/tricorder/tricorder-eeprom.h rename
> board/{prodrive/pdnb3 => ppcag/bg0900}/Makefile (50%) create mode
> 100644 board/ppcag/bg0900/bg0900.c create mode 100644
> board/ppcag/bg0900/spl_boot.c delete mode 100644
> board/prodrive/pdnb3/flash.c delete mode 100644
> board/prodrive/pdnb3/nand.c delete mode 100644
> board/prodrive/pdnb3/pdnb3.c create mode 100644 board/udoo/Makefile
> create mode 100644 board/udoo/udoo.c rename
> include/configs/{igep0033.h => am335x_igep0033.h} (100%) create mode
> 100644 include/configs/bg0900.h rename include/configs/{igep00x0.h =>
> omap3_igep00x0.h} (100%) delete mode 100644 include/configs/pdnb3.h
> create mode 100644 include/configs/udoo.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131111/1e1bbf39/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-11-09 22:53 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
15c5cdf5aa6b292145e5e3e220ec1f42b11eff6f:
Merge branch 'master' of git://www.denx.de/git/u-boot-usb (2013-11-08
15:25:29 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 85b8c5c4bf80025de4632ae6c9a8a606e51508a4:
Merge branch 'iu-boot/master' into 'u-boot-arm/master' (2013-11-09
22:59:47 +0100)
NOTE 1: the top of u-boot-arm/master is a merge from u-boot/master with
non-trivial conflict resolutions, involving some changes to
non-conflicting files too. See 'git show 85b8c5c4' for details.
NOTE 2: eleven ARM targets fail with a warning about CONFIG_SYS_HZ:
omap730p2_cs3boot omap730p2_cs0boot scb9328 palmtc balloon3
mini2440 zipitz2 palmld omap730p2 omap3_zoom2 mx1ads. These
failures already happen on u-boot/master and are thus not due
to the ARM branch.
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'iu-boot/master' into 'u-boot-arm/master'
Anatolij Gustschin (1):
imx_watchdog: do not soft-reset while watchdog init
Andreas Bie?mann (10):
tricorder: update flash partitioning
tricorder: use generic provided loadaddr
tricorder: add configuration for a flashcard u-boot
tricorder: add cmdline history
tricorder: add mtdparts to environment
tricorder: add tricordereeprom command
tricorder: panic() on unknown board
tricorder: add led support
tricorder: read kernel directly from NAND
tricorder: support 256MiB SDRAM on revision > D
Bo Shen (3):
net: macb: get DMA bus width from design config register
arm: atmel: at91sam9n12ek: add usb host support
arm: atmel: get rid of too many ifdeffery
Christoph G. Baumann (1):
ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900
Eric Nelson (1):
i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt
Fabio Estevam (5):
udoo: Add initial support for mx6q udoo board
ARM: mx5: Enable L2 cache
mx5: lowlevel_init: Remove unused macro
configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
wandboard: README: Include the quad version
Heiko Schocher (2):
nand, davinci: add special UBL ecc position
arm, da85x: update for the ipam390 board
Igor Grinberg (2):
cm-t35: move the eeprom code to common place
cm-t35: move the display code to common place
Javier Martinez Canillas (2):
ARM: IGEP0033: rename config file to am335x_igep0033.h
OMAP3: igep00x0: rename config file to omap3_igep00x0.h
Jens Scharsig (BuS Elektronik) (1):
ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target
Lokesh Vutla (1):
ARM: OMAP4: Convert to ti_armv7_common.h
Marek Vasut (4):
ARM: mxs: tools: Use mkimage for BootStream generation
ARM: mxs: Add PPC-AG BG0900 board
ARM: mxs: Setup stack in JTAG mode
ARM: mxs: Enable DCDC converter for battery boot
Michal Simek (1):
zynq: Use arch_cpu_init() instead of lowlevel_init()
Minal Shah (1):
dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build
Nikita Kiryanov (3):
cm_t35: reduce default bootdelay to 3 seconds
cm_t35: turn on GPIO commands
cm_t35: update lcd predefines
Otavio Salvador (1):
mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin
Pierre Aubert (1):
mx6: compute PLL PFD frequencies rather than using defines
Roger Meier (1):
at91: add defines for reset type
SRICHARAN R (1):
ARM: OMAP5: DDR3: Change io settings
Stefan Roese (1):
arm: Remove IXP425 boards pdnb3 and scpu
Stefano Babic (1):
Revert "configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL
boards"
Thomas Weber (3):
tricorder: remove lcdmode from bootargs
tricorder: Make u-boot faster
tricorder: switch to alternative memtest
Tom Rini (7):
drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly
am33xx, davinci: Create and use <asm/davinci_rtc.h>
bootcount_davinci: Switch to scratch register #2
TI:am33xx: Add bootcount support to ti_am335x_common.h
am335x: Enable CONFIG_OMAP_WATCHDOG support
TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address
TI:omap5: Add rdaddr, use consistent loadaddr values
arch/arm/cpu/arm926ejs/mxs/Makefile | 10 ++--
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 4 +-
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 4 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +
arch/arm/cpu/arm926ejs/mxs/start.S | 9 +++
arch/arm/cpu/armv7/am33xx/board.c | 7 ++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 12 ++--
arch/arm/cpu/armv7/mx6/clock.c | 56
++++++++++++++-----
arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++
arch/arm/cpu/armv7/zynq/cpu.c | 6 ++
arch/arm/include/asm/arch-am33xx/cpu.h | 9 ---
arch/arm/include/asm/arch-at91/at91_pmc.h | 2 +
arch/arm/include/asm/arch-at91/at91_rstc.h | 7 +++
arch/arm/include/asm/arch-davinci/hardware.h | 38
-------------
arch/arm/include/asm/arch-mx6/crm_regs.h | 11 ----
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +-
arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +
arch/arm/include/asm/arch-omap5/omap.h | 4 +-
arch/arm/include/asm/arch-omap5/spl.h | 1 +
arch/arm/include/asm/davinci_rtc.h | 52
+++++++++++++++++
board/Barix/ipam390/ipam390-ais-uart.cfg | 2 +-
board/Barix/ipam390/ipam390.c | 29
+++------- board/atmel/at91sam9n12ek/at91sam9n12ek.c
| 11 ++++ board/boundary/nitrogen6x/6x_upgrade.txt
| 2 +- board/compulab/cm_t35/Makefile
| 3 - board/compulab/cm_t35/cm_t35.c
| 7 +-- board/compulab/common/Makefile
| 10 ++++ board/compulab/{cm_t35 => common}/eeprom.c
| 51 +++++++++-------- board/compulab/{cm_t35 =>
common}/eeprom.h | 8 +--
board/compulab/{cm_t35/display.c => common/omap3_display.c} | 8 ++-
board/corscience/tricorder/Makefile | 2 +-
board/corscience/tricorder/led.c | 80
+++++++++++++++++++++++++++
board/corscience/tricorder/tricorder-eeprom.c | 251
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/corscience/tricorder/tricorder-eeprom.h | 41
++++++++++++++
board/corscience/tricorder/tricorder.c | 126
++++++++++++++++++++++++++++++++++++++---
board/corscience/tricorder/tricorder.h | 4 +-
board/enbw/enbw_cmc/enbw_cmc.c | 1 +
board/{prodrive/pdnb3 => ppcag/bg0900}/Makefile | 8 ++-
board/ppcag/bg0900/bg0900.c | 86
++++++++++++++++++++++++++++
board/ppcag/bg0900/spl_boot.c | 153
++++++++++++++++++++++++++++++++++++++++++++++++++
board/prodrive/pdnb3/flash.c | 73
------------------------
board/prodrive/pdnb3/nand.c | 129
------------------------------------------
board/prodrive/pdnb3/pdnb3.c | 220
------------------------------------------------------------------------
board/ti/am335x/board.c | 6 ++
board/udoo/Makefile | 7 +++
board/udoo/udoo.c | 110
++++++++++++++++++++++++++++++++++++
board/wandboard/README | 4 +-
boards.cfg | 20
++++--- doc/README.mxs |
39 ++++++++++---
doc/README.scrapyard | 4 +-
drivers/bootcount/Makefile | 1 +
drivers/bootcount/bootcount_davinci.c | 13
+++-- drivers/mtd/nand/davinci_nand.c |
12 ++++ drivers/net/macb.c |
20 ++++++- drivers/net/macb.h
| 11 ++++ drivers/rtc/davinci.c
| 8 +-- drivers/usb/host/ohci-at91.c
| 19 ++++---
drivers/watchdog/imx_watchdog.c | 3 +-
include/configs/afeb9260.h | 1 +
include/configs/{igep0033.h => am335x_igep0033.h} | 0
include/configs/at91rm9200ek.h | 1 +
include/configs/at91sam9260ek.h | 1 +
include/configs/at91sam9261ek.h | 1 +
include/configs/at91sam9263ek.h | 1 +
include/configs/at91sam9n12ek.h | 13
+++++ include/configs/at91sam9x5ek.h |
3 +- include/configs/bg0900.h | 97
++++++++++++++++++++++++++++++++
include/configs/cm_t35.h | 3 +-
include/configs/cpu9260.h | 1 +
include/configs/cpuat91.h | 1 +
include/configs/dra7xx_evm.h | 9 ++-
include/configs/eb_cpux9k2.h | 4 +-
include/configs/ethernut5.h | 1 +
include/configs/ipam390.h | 35
+++++++-----
include/configs/meesc.h | 1 +
include/configs/{igep00x0.h => omap3_igep00x0.h} | 0
include/configs/omap4_common.h | 187
+++++++++----------------------------------------------------
include/configs/omap4_panda.h | 2 -
include/configs/omap4_sdp4430.h | 2 -
include/configs/omap5_common.h | 7 ++-
include/configs/otc570.h | 1 +
include/configs/pdnb3.h | 320
---------------------------------------------------------------------------------------------------------
include/configs/pm9261.h | 1 +
include/configs/pm9263.h | 1 +
include/configs/pm9g45.h | 1 +
include/configs/sama5d3xek.h | 1 +
include/configs/sbc35_a9g20.h | 1 +
include/configs/snapper9260.h | 1 +
include/configs/stamp9g20.h | 1 +
include/configs/ti_am335x_common.h | 14
+++++ include/configs/ti_armv7_common.h |
2 +- include/configs/top9000.h | 1
+ include/configs/tricorder.h | 155
++++++++++++++++++++++++++++++++++++++-------------
include/configs/udoo.h | 206
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/vl_ma2sc.h | 1 + 95
files changed, 1730 insertions(+), 1172 deletions(-) create mode
100644 arch/arm/include/asm/davinci_rtc.h create mode 100644
board/compulab/common/Makefile rename board/compulab/{cm_t35 =>
common}/eeprom.c (60%) rename board/compulab/{cm_t35 =>
common}/eeprom.h (62%) rename board/compulab/{cm_t35/display.c =>
common/omap3_display.c} (97%) create mode 100644
board/corscience/tricorder/led.c create mode 100644
board/corscience/tricorder/tricorder-eeprom.c create mode 100644
board/corscience/tricorder/tricorder-eeprom.h rename
board/{prodrive/pdnb3 => ppcag/bg0900}/Makefile (50%) create mode
100644 board/ppcag/bg0900/bg0900.c create mode 100644
board/ppcag/bg0900/spl_boot.c delete mode 100644
board/prodrive/pdnb3/flash.c delete mode 100644
board/prodrive/pdnb3/nand.c delete mode 100644
board/prodrive/pdnb3/pdnb3.c create mode 100644 board/udoo/Makefile
create mode 100644 board/udoo/udoo.c rename
include/configs/{igep0033.h => am335x_igep0033.h} (100%) create mode
100644 include/configs/bg0900.h rename include/configs/{igep00x0.h =>
omap3_igep00x0.h} (100%) delete mode 100644 include/configs/pdnb3.h
create mode 100644 include/configs/udoo.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-10-11 14:33 Albert ARIBAUD
@ 2013-10-14 15:20 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-10-14 15:20 UTC (permalink / raw)
To: u-boot
On Fri, Oct 11, 2013 at 04:33:18PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 572886af5984febafa6f083e6b8af0465f4f5764:
>
> socfpga: Adding pin mux handoff files (2013-10-07 19:32:30 +0200)
>
> are available in the git repository at:
>
> git://git.denx.De/u-boot-arm master
>
> for you to fetch changes up to 5a9120439416a9101dec7c7dc65bb75a5ff09c4e:
>
> Merge branch 'u-boot-samsung/master' into
> 'u-boot-arm/master' (2013-10-11 14:47:25 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (1):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
>
> Piotr Wilczek (4):
> drivers:power:max77693: add support for new multi function pmic
> max77693 power:battery: add battery support for Trats2 board
> samsung:common:i2c: add definions for third soft I2C adapter for
> Trats2 board samsung: trats2: add support for new board Trats2
>
> Makefile | 1 +
> board/samsung/common/multi_i2c.c | 12 +
> board/samsung/trats2/Makefile | 34 +++
> board/samsung/trats2/trats2.c | 513
> +++++++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> drivers/power/battery/Makefile | 1 +
> drivers/power/battery/bat_trats2.c | 65 +++++
> drivers/power/mfd/Makefile | 33 +++
> drivers/power/mfd/fg_max77693.c | 139 ++++++++++
> drivers/power/mfd/muic_max77693.c | 77 ++++++
> drivers/power/mfd/pmic_max77693.c | 96 +++++++
> include/configs/trats2.h | 311 ++++++++++++++++++++++
> include/power/max77693_fg.h | 49 ++++
> include/power/max77693_muic.h | 74 ++++++
> include/power/max77693_pmic.h | 43 ++++ 15 files changed, 1449
> insertions(+) create mode 100644 board/samsung/trats2/Makefile
> create mode 100644 board/samsung/trats2/trats2.c
> create mode 100644 drivers/power/battery/bat_trats2.c
> create mode 100644 drivers/power/mfd/Makefile
> create mode 100644 drivers/power/mfd/fg_max77693.c
> create mode 100644 drivers/power/mfd/muic_max77693.c
> create mode 100644 drivers/power/mfd/pmic_max77693.c
> create mode 100644 include/configs/trats2.h
> create mode 100644 include/power/max77693_fg.h
> create mode 100644 include/power/max77693_muic.h
> create mode 100644 include/power/max77693_pmic.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131014/bed2b644/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-10-11 14:33 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
572886af5984febafa6f083e6b8af0465f4f5764:
socfpga: Adding pin mux handoff files (2013-10-07 19:32:30 +0200)
are available in the git repository at:
git://git.denx.De/u-boot-arm master
for you to fetch changes up to 5a9120439416a9101dec7c7dc65bb75a5ff09c4e:
Merge branch 'u-boot-samsung/master' into
'u-boot-arm/master' (2013-10-11 14:47:25 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Piotr Wilczek (4):
drivers:power:max77693: add support for new multi function pmic
max77693 power:battery: add battery support for Trats2 board
samsung:common:i2c: add definions for third soft I2C adapter for
Trats2 board samsung: trats2: add support for new board Trats2
Makefile | 1 +
board/samsung/common/multi_i2c.c | 12 +
board/samsung/trats2/Makefile | 34 +++
board/samsung/trats2/trats2.c | 513
+++++++++++++++++++++++++++++++++++++
boards.cfg | 1 +
drivers/power/battery/Makefile | 1 +
drivers/power/battery/bat_trats2.c | 65 +++++
drivers/power/mfd/Makefile | 33 +++
drivers/power/mfd/fg_max77693.c | 139 ++++++++++
drivers/power/mfd/muic_max77693.c | 77 ++++++
drivers/power/mfd/pmic_max77693.c | 96 +++++++
include/configs/trats2.h | 311 ++++++++++++++++++++++
include/power/max77693_fg.h | 49 ++++
include/power/max77693_muic.h | 74 ++++++
include/power/max77693_pmic.h | 43 ++++ 15 files changed, 1449
insertions(+) create mode 100644 board/samsung/trats2/Makefile
create mode 100644 board/samsung/trats2/trats2.c
create mode 100644 drivers/power/battery/bat_trats2.c
create mode 100644 drivers/power/mfd/Makefile
create mode 100644 drivers/power/mfd/fg_max77693.c
create mode 100644 drivers/power/mfd/muic_max77693.c
create mode 100644 drivers/power/mfd/pmic_max77693.c
create mode 100644 include/configs/trats2.h
create mode 100644 include/power/max77693_fg.h
create mode 100644 include/power/max77693_muic.h
create mode 100644 include/power/max77693_pmic.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-10-07 20:02 Albert ARIBAUD
@ 2013-10-08 19:33 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-10-08 19:33 UTC (permalink / raw)
To: u-boot
On Mon, Oct 07, 2013 at 10:02:08PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> e261c83aa04ce0396d57aaecf8dfe0970ffac03e:
>
> ARM: VExpress: enable ARMv7 virt support for VExpress A15 (2013-10-03
> 21:28:57 +0200)
>
> are available in the git repository at:
>
> git://git.denx.De/u-boot-arm master
>
> for you to fetch changes up to 572886af5984febafa6f083e6b8af0465f4f5764:
>
> socfpga: Adding pin mux handoff files (2013-10-07 19:32:30 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> omap1510inn: arm925t: remove support
>
> Andrew Murray (1):
> usb: Fix error handling in musb_hcd.c
>
> Chin Liang See (2):
> socfpga: Adding System Manager driver
> socfpga: Adding pin mux handoff files
>
> Enric Balletbo i Serra (1):
> ARM: IGEP0033: Update timing to run DDR at 400MHz.
>
> Lars Poeschel (1):
> pcm051/igep0033: Supply bd_ram_ofs for cpsw driver
>
> Tom Rini (1):
> am335x_evm: Switch to zImage as default rather than uImage
>
> MAKEALL | 1 -
> README | 1 -
> arch/arm/cpu/arm925t/Makefile | 34 --
> arch/arm/cpu/arm925t/config.mk | 15 -
> arch/arm/cpu/arm925t/cpu.c | 50 ---
> arch/arm/cpu/arm925t/omap925.c | 23 --
> arch/arm/cpu/arm925t/start.S | 382
> ---------------------
> arch/arm/cpu/arm925t/timer.c | 104 ------
> arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/spl.c | 6 +
> arch/arm/cpu/armv7/socfpga/system_manager.c | 27 ++
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 24
> +- .../include/asm/arch-socfpga/socfpga_base_addrs.h | 1 +
> arch/arm/include/asm/arch-socfpga/system_manager.h | 22 ++
> board/altera/socfpga/Makefile | 4 +-
> board/altera/socfpga/pinmux_config.c | 214 ++++++++++++
> board/altera/socfpga/pinmux_config.h | 54 +++
> board/isee/igep0033/board.c | 5 +-
> board/phytec/pcm051/board.c | 1 +
> board/ti/omap1510inn/Makefile | 29 --
> board/ti/omap1510inn/config.mk | 25 --
> board/ti/omap1510inn/lowlevel_init.S | 380
> --------------------
> board/ti/omap1510inn/omap1510innovator.c | 125 -------
> boards.cfg | 1 -
> doc/README.scrapyard | 3 +-
> drivers/usb/musb/musb_hcd.c | 10 +-
> include/arm925t.h | 11 -
> include/configs/am335x_evm.h | 22 +-
> include/configs/omap1510inn.h | 166 ---------
> include/configs/socfpga_cyclone5.h | 1 + 30 files
> changed, 363 insertions(+), 1380 deletions(-) delete mode 100644
> arch/arm/cpu/arm925t/Makefile delete mode 100644
> arch/arm/cpu/arm925t/config.mk delete mode 100644
> arch/arm/cpu/arm925t/cpu.c delete mode 100644
> arch/arm/cpu/arm925t/omap925.c delete mode 100644
> arch/arm/cpu/arm925t/start.S delete mode 100644
> arch/arm/cpu/arm925t/timer.c create mode 100644
> arch/arm/cpu/armv7/socfpga/system_manager.c create mode 100644
> arch/arm/include/asm/arch-socfpga/system_manager.h create mode 100644
> board/altera/socfpga/pinmux_config.c create mode 100644
> board/altera/socfpga/pinmux_config.h delete mode 100644
> board/ti/omap1510inn/Makefile delete mode 100644
> board/ti/omap1510inn/config.mk delete mode 100644
> board/ti/omap1510inn/lowlevel_init.S delete mode 100644
> board/ti/omap1510inn/omap1510innovator.c delete mode 100644
> include/arm925t.h delete mode 100644 include/configs/omap1510inn.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131008/6af4aeb4/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-10-07 20:02 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
e261c83aa04ce0396d57aaecf8dfe0970ffac03e:
ARM: VExpress: enable ARMv7 virt support for VExpress A15 (2013-10-03
21:28:57 +0200)
are available in the git repository at:
git://git.denx.De/u-boot-arm master
for you to fetch changes up to 572886af5984febafa6f083e6b8af0465f4f5764:
socfpga: Adding pin mux handoff files (2013-10-07 19:32:30 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
omap1510inn: arm925t: remove support
Andrew Murray (1):
usb: Fix error handling in musb_hcd.c
Chin Liang See (2):
socfpga: Adding System Manager driver
socfpga: Adding pin mux handoff files
Enric Balletbo i Serra (1):
ARM: IGEP0033: Update timing to run DDR at 400MHz.
Lars Poeschel (1):
pcm051/igep0033: Supply bd_ram_ofs for cpsw driver
Tom Rini (1):
am335x_evm: Switch to zImage as default rather than uImage
MAKEALL | 1 -
README | 1 -
arch/arm/cpu/arm925t/Makefile | 34 --
arch/arm/cpu/arm925t/config.mk | 15 -
arch/arm/cpu/arm925t/cpu.c | 50 ---
arch/arm/cpu/arm925t/omap925.c | 23 --
arch/arm/cpu/arm925t/start.S | 382
---------------------
arch/arm/cpu/arm925t/timer.c | 104 ------
arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
arch/arm/cpu/armv7/socfpga/spl.c | 6 +
arch/arm/cpu/armv7/socfpga/system_manager.c | 27 ++
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 24
+- .../include/asm/arch-socfpga/socfpga_base_addrs.h | 1 +
arch/arm/include/asm/arch-socfpga/system_manager.h | 22 ++
board/altera/socfpga/Makefile | 4 +-
board/altera/socfpga/pinmux_config.c | 214 ++++++++++++
board/altera/socfpga/pinmux_config.h | 54 +++
board/isee/igep0033/board.c | 5 +-
board/phytec/pcm051/board.c | 1 +
board/ti/omap1510inn/Makefile | 29 --
board/ti/omap1510inn/config.mk | 25 --
board/ti/omap1510inn/lowlevel_init.S | 380
--------------------
board/ti/omap1510inn/omap1510innovator.c | 125 -------
boards.cfg | 1 -
doc/README.scrapyard | 3 +-
drivers/usb/musb/musb_hcd.c | 10 +-
include/arm925t.h | 11 -
include/configs/am335x_evm.h | 22 +-
include/configs/omap1510inn.h | 166 ---------
include/configs/socfpga_cyclone5.h | 1 + 30 files
changed, 363 insertions(+), 1380 deletions(-) delete mode 100644
arch/arm/cpu/arm925t/Makefile delete mode 100644
arch/arm/cpu/arm925t/config.mk delete mode 100644
arch/arm/cpu/arm925t/cpu.c delete mode 100644
arch/arm/cpu/arm925t/omap925.c delete mode 100644
arch/arm/cpu/arm925t/start.S delete mode 100644
arch/arm/cpu/arm925t/timer.c create mode 100644
arch/arm/cpu/armv7/socfpga/system_manager.c create mode 100644
arch/arm/include/asm/arch-socfpga/system_manager.h create mode 100644
board/altera/socfpga/pinmux_config.c create mode 100644
board/altera/socfpga/pinmux_config.h delete mode 100644
board/ti/omap1510inn/Makefile delete mode 100644
board/ti/omap1510inn/config.mk delete mode 100644
board/ti/omap1510inn/lowlevel_init.S delete mode 100644
board/ti/omap1510inn/omap1510innovator.c delete mode 100644
include/arm925t.h delete mode 100644 include/configs/omap1510inn.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-10-03 20:42 Albert ARIBAUD
@ 2013-10-04 18:46 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-10-04 18:46 UTC (permalink / raw)
To: u-boot
On Thu, Oct 03, 2013 at 10:42:46PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> f04c53762962280365005c9db12ab561a18f2692:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-10-02
> 14:53:27 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.De/u-boot-arm master
>
> for you to fetch changes up to e261c83aa04ce0396d57aaecf8dfe0970ffac03e:
>
> ARM: VExpress: enable ARMv7 virt support for VExpress A15 (2013-10-03
> 21:28:57 +0200)
>
> ----------------------------------------------------------------
> Andre Przywara (8):
> ARM: prepare armv7.h to be included from assembly source
> ARM: add secure monitor handler to switch to non-secure state
> ARM: add assembly routine to switch to non-secure state
> ARM: add C function to switch to non-secure state
> ARM: trigger non-secure state switch during bootm execution
> ARM: add SMP support for non-secure switch
> ARM: extend non-secure switch to also go into HYP mode
> ARM: VExpress: enable ARMv7 virt support for VExpress A15
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131004/1e76c3a1/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-10-03 20:42 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
f04c53762962280365005c9db12ab561a18f2692:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-10-02
14:53:27 +0200)
are available in the git repository at:
git://git.denx.De/u-boot-arm master
for you to fetch changes up to e261c83aa04ce0396d57aaecf8dfe0970ffac03e:
ARM: VExpress: enable ARMv7 virt support for VExpress A15 (2013-10-03
21:28:57 +0200)
----------------------------------------------------------------
Andre Przywara (8):
ARM: prepare armv7.h to be included from assembly source
ARM: add secure monitor handler to switch to non-secure state
ARM: add assembly routine to switch to non-secure state
ARM: add C function to switch to non-secure state
ARM: trigger non-secure state switch during bootm execution
ARM: add SMP support for non-secure switch
ARM: extend non-secure switch to also go into HYP mode
ARM: VExpress: enable ARMv7 virt support for VExpress A15
arch/arm/cpu/armv7/Makefile | 5 +
arch/arm/cpu/armv7/nonsec_virt.S | 208
++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/virt-v7.c | 173
++++++++++++++++++++++++++ arch/arm/include/asm/armv7.h |
33 ++++- arch/arm/include/asm/gic.h | 19 +++
arch/arm/lib/bootm.c | 18 +++
board/armltd/vexpress/vexpress_common.c | 15 +++
include/common.h | 2 +
include/configs/vexpress_ca15_tc2.h | 5 +- 9 files changed, 476
insertions(+), 2 deletions(-) create mode 100644
arch/arm/cpu/armv7/nonsec_virt.S create mode 100644
arch/arm/cpu/armv7/virt-v7.c create mode 100644
arch/arm/include/asm/gic.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-10-02 15:34 Albert ARIBAUD
@ 2013-10-02 18:20 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-10-02 18:20 UTC (permalink / raw)
To: u-boot
On Wed, Oct 02, 2013 at 05:34:07PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
>
> Revert "standalone-examples: support custom GCC lib" (2013-09-12
> 10:27:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.De/u-boot-arm master
>
> for you to fetch changes up to f04c53762962280365005c9db12ab561a18f2692:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-10-02
> 14:53:27 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (3):
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Andrew Gabbasov (1):
> mx6: Fix calculation of emi_slow clock rate
>
> Elie De Brauwer (1):
> mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
>
> Eric Nelson (2):
> i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
> i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
>
> Fabio Estevam (17):
> mx6sabresd: Add LVDS splash screen support
> wandboard: Use imx6dl-wandboard.dtb for the solo version
> mx6sabresd: Avoid hang when HDMI cable is not connected
> mx6sabresd: Reset counter to prevent error message
> mmc: fsl_esdhc: Check the result from malloc()
> mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
> mx6sabresd: Return error if cpu_eth_init() fails
> mx6qsabreauto: Return error if cpu_eth_init() fails
> net: fec_mxc: Add support for mx6 solo-lite
> mx6slevk: Add Ethernet support
> mx28evk: Fix checkpatch warning
> doc: README.mxs: Add instruction to install 'libssl-dev'
> mx6sabresd: Fix the fdt file for the mx6dl version
> net: fec_mxc: Fix timeouts during tftp transfer
> mx28evk: Propagate the error if cpu_eth_init() fails
> mx28evk: Propagate the error if cpu_eth_init() fails
> mx35pdk: Fix error handling in board_late_init()
>
> Greg Guyotte (1):
> drivers/power/pmic: Add tps65217 driver
>
> Heiko Schocher (1):
> net, phy, cpsw: fix NULL pointer deference
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: increase malloc space to fix crash on start
> u-boot
>
> Jeroen Hofstee (4):
> arm: prevent using movt/movw address loads
> ARM,relocate: do not use r9
> ARM: use r9 for gd
> README: update ARM register usage
>
> Kuo-Jung Su (1):
> arm: dma_alloc_coherent: malloc() -> memalign()
>
> Lokesh Vutla (2):
> ARM: DRA7: Enable saveenv command
> ARM: OMAP5: Avoid writing into LDO SRAM bits
>
> Marek Vasut (6):
> tools: mxsboot: Mark the FCB pages as valid
> ARM: mxs: Sort the mx23evk and mx23_olinuxino
> ARM: mxs: Document the power block initialization
> ARM: mxs: Receive r0 and r1 passed from BootROM
> ARM: mxs: Add Creative ZEN XFi3 board
> ARM: mxs: Add SanDisk Sansa Fuze+ board
>
> Markus Niebel (1):
> ARM: arch-mx6: fix PLL2_PFD2_FREQ
>
> Masahiro Yamada (6):
> arm: spl: Do not set the stack pointer twice
> ARM: s3c44b0: remove remainders of dead board
> drivers: s3c44b0_i2c: delete an unused driver
> drivers: serial_s3c44b0: delete an unused driver
> drivers: s3c44b0_rtc: delete an unused driver
> ARM: refactor compiler options in config.mk
>
> Michal Simek (1):
> arm: zynq: Fix timer loadaddress
>
> Philip, Avinash (1):
> drivers/power/pmic: Add tps65910 driver
>
> Pierre Aubert (1):
> mx6: Fix use of improper value in enable_ipu_clock
>
> Robert P. J. Day (1):
> am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so
> should mmcroot.
>
> Robert Winkler (1):
> imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
>
> Stefano Babic (1):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> Steve Kipisz (1):
> am335x:Handle worst case scenario for Errata 1.0.24
>
> Tom Rini (4):
> spl/Makefile: Add drivers/power/pmic/libpmic to
> CONFIG_SPL_POWER_SUPPORT am33xx: Add am33xx_spl_board_init function,
> call am33xx: Add the efuse_sma CONTROL_MODULE register
> am335x_evm: am33xx_spl_board_init function and scale core
> frequency
>
> York Sun (1):
> tools/imximage.c: Fix compiling warning
>
> trem (3):
> mx27: add missing constant for mx27
> apf27: add support for the armadeus APF27 board
> apf27: add FPGA support for the apf27 board
>
> README | 9 ++-
> arch/arm/config.mk | 11 ++-
> arch/arm/cpu/arm1136/config.mk | 1 -
> arch/arm/cpu/arm1176/config.mk | 1 -
> arch/arm/cpu/arm720t/config.mk | 2 -
> arch/arm/cpu/arm920t/config.mk | 2 -
> arch/arm/cpu/arm925t/config.mk | 2 -
> arch/arm/cpu/arm926ejs/config.mk | 2 -
> arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 ++
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209
> +++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/arm926ejs/mxs/start.S | 50
> +++++++----- arch/arm/cpu/arm946es/config.mk
> | 2 - arch/arm/cpu/arm_intcm/config.mk | 2 -
> arch/arm/cpu/armv7/am33xx/board.c | 11 +++
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 8 +-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 57
> +++++++++++++ arch/arm/cpu/armv7/config.mk
> | 1 - arch/arm/cpu/armv7/lowlevel_init.S | 4
> +- arch/arm/cpu/armv7/mx6/clock.c | 40
> +++++++-- arch/arm/cpu/armv7/omap-common/boot-common.c | 3
> + arch/arm/cpu/armv7/omap-common/clocks-common.c | 7 --
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 12 ---
> arch/arm/cpu/armv7/rmobile/config.mk | 1 -
> arch/arm/cpu/armv7/zynq/timer.c | 2 +-
> arch/arm/cpu/ixp/config.mk | 2 +-
> arch/arm/cpu/pxa/config.mk | 2 -
> arch/arm/cpu/s3c44b0/cache.c | 74
> -----------------
> arch/arm/cpu/s3c44b0/config.mk | 18 -----
> arch/arm/cpu/s3c44b0/cpu.c | 58
> ------------- arch/arm/cpu/s3c44b0/start.S |
> 228 ---------------------------------------------------
> arch/arm/cpu/s3c44b0/timer.c | 102
> -----------------------
> arch/arm/cpu/sa1100/config.mk | 2 -
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 12 ++-
> arch/arm/include/asm/arch-am33xx/cpu.h | 12 +++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 4 +
> arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +-
> arch/arm/include/asm/arch-mx6/iomux.h | 5 ++
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 +-
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 +
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 +++
> arch/arm/include/asm/arch-mxs/sys_proto.h | 5 +-
> arch/arm/include/asm/arch-s3c44b0/hardware.h | 281
> ---------------------------------------------------------------
> arch/arm/include/asm/dma-mapping.h | 2 +-
> arch/arm/include/asm/global_data.h | 2 +-
> arch/arm/include/asm/omap_common.h | 6 --
> arch/arm/lib/crt0.S | 16 ++--
> arch/arm/lib/relocate.S | 6 +-
> arch/arm/lib/spl.c | 3 -
> board/armadeus/apf27/Makefile | 33 ++++++++
> board/armadeus/apf27/apf27.c | 256
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/armadeus/apf27/apf27.h | 489
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/armadeus/apf27/fpga.c | 224
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> board/armadeus/apf27/fpga.h | 25 ++++++
> board/armadeus/apf27/lowlevel_init.S | 168
> ++++++++++++++++++++++++++++++++++++++
> board/bluegiga/apx4devkit/spl_boot.c | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 4 +-
> {arch/arm/cpu/s3c44b0 => board/creative/xfi3}/Makefile | 21 +++--
> board/creative/xfi3/spl_boot.c | 134
> ++++++++++++++++++++++++++++++
> board/creative/xfi3/xfi3.c | 224
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> board/denx/m28evk/m28evk.c | 2 +
> board/denx/m28evk/spl_boot.c | 4 +-
> board/freescale/mx23evk/spl_boot.c | 4 +-
> board/freescale/mx28evk/iomux.c | 4 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx35pdk/mx35pdk.c | 10 +--
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +-
> board/freescale/mx6sabresd/mx6sabresd.c | 169
> +++++++++++++++++++++++++++++++++-----
> board/freescale/mx6slevk/mx6slevk.c | 68
> ++++++++++++++++
> board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
> board/sandisk/sansa_fuze_plus/Makefile | 31 +++++++
> board/sandisk/sansa_fuze_plus/sfp.c | 388
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/sandisk/sansa_fuze_plus/spl_boot.c | 140
> ++++++++++++++++++++++++++++++++
> board/schulercontrol/sc_sps_1/spl_boot.c | 4 +-
> board/ti/am335x/board.c | 146
> +++++++++++++++++++++++++++++++++
> boards.cfg | 3 +
> doc/README.mxs | 5 ++
> doc/driver-model/UDM-rtc.txt | 15 ++--
> doc/driver-model/UDM-serial.txt | 16 ++--
> drivers/i2c/Makefile | 1 -
> drivers/i2c/s3c44b0_i2c.c | 299
> -------------------------------------------------------------------
> drivers/mmc/fsl_esdhc.c | 2 +
> drivers/mtd/nand/mxs_nand.c | 3 +
> drivers/net/cpsw.c | 10 ++-
> drivers/net/fec_mxc.c | 4 +-
> drivers/net/fec_mxc.h | 4 +-
> drivers/power/pmic/Makefile | 2 +
> drivers/power/pmic/pmic_tps65217.c | 109
> +++++++++++++++++++++++++
> drivers/power/pmic/pmic_tps65910.c | 83
> +++++++++++++++++++
> drivers/rtc/Makefile | 1 -
> drivers/rtc/s3c44b0_rtc.c | 84
> -------------------
> drivers/serial/Makefile | 1 -
> drivers/serial/serial.c | 2 -
> drivers/serial/serial_s3c44b0.c | 216
> -------------------------------------------------
> include/configs/am335x_evm.h | 6 ++
> include/configs/apf27.h | 388
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/dra7xx_evm.h | 8 +-
> include/configs/eb_cpux9k2.h | 2 +-
> include/configs/mx35pdk.h | 1 -
> include/configs/mx6sabresd.h | 4 +
> include/configs/mx6slevk.h | 14 ++++
> include/configs/pcm051.h | 1 +
> include/configs/sansa_fuze_plus.h | 70
> ++++++++++++++++
> include/configs/wandboard.h | 4 +-
> include/configs/xfi3.h | 69
> ++++++++++++++++
> include/power/tps65217.h | 83
> +++++++++++++++++++
> include/power/tps65910.h | 77
> ++++++++++++++++++
> spl/Makefile | 3 +-
> tools/imximage.c | 8 +-
> tools/mxsboot.c | 10 ++- 112
> files changed, 3918 insertions(+), 1569 deletions(-) delete mode
> 100644 arch/arm/cpu/s3c44b0/cache.c delete mode 100644
> arch/arm/cpu/s3c44b0/config.mk delete mode 100644
> arch/arm/cpu/s3c44b0/cpu.c delete mode 100644
> arch/arm/cpu/s3c44b0/start.S delete mode 100644
> arch/arm/cpu/s3c44b0/timer.c delete mode 100644
> arch/arm/include/asm/arch-s3c44b0/hardware.h create mode 100644
> board/armadeus/apf27/Makefile create mode 100644
> board/armadeus/apf27/apf27.c create mode 100644
> board/armadeus/apf27/apf27.h create mode 100644
> board/armadeus/apf27/fpga.c create mode 100644
> board/armadeus/apf27/fpga.h create mode 100644
> board/armadeus/apf27/lowlevel_init.S rename {arch/arm/cpu/s3c44b0 =>
> board/creative/xfi3}/Makefile (60%) create mode 100644
> board/creative/xfi3/spl_boot.c create mode 100644
> board/creative/xfi3/xfi3.c create mode 100644
> board/sandisk/sansa_fuze_plus/Makefile create mode 100644
> board/sandisk/sansa_fuze_plus/sfp.c create mode 100644
> board/sandisk/sansa_fuze_plus/spl_boot.c delete mode 100644
> drivers/i2c/s3c44b0_i2c.c create mode 100644
> drivers/power/pmic/pmic_tps65217.c create mode 100644
> drivers/power/pmic/pmic_tps65910.c delete mode 100644
> drivers/rtc/s3c44b0_rtc.c delete mode 100644
> drivers/serial/serial_s3c44b0.c create mode 100644
> include/configs/apf27.h create mode 100644
> include/configs/sansa_fuze_plus.h create mode 100644
> include/configs/xfi3.h create mode 100644 include/power/tps65217.h
> create mode 100644 include/power/tps65910.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131002/714ff57a/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-10-02 15:34 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
Revert "standalone-examples: support custom GCC lib" (2013-09-12
10:27:29 -0400)
are available in the git repository at:
git://git.denx.De/u-boot-arm master
for you to fetch changes up to f04c53762962280365005c9db12ab561a18f2692:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-10-02
14:53:27 +0200)
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Andrew Gabbasov (1):
mx6: Fix calculation of emi_slow clock rate
Elie De Brauwer (1):
mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
Eric Nelson (2):
i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
Fabio Estevam (17):
mx6sabresd: Add LVDS splash screen support
wandboard: Use imx6dl-wandboard.dtb for the solo version
mx6sabresd: Avoid hang when HDMI cable is not connected
mx6sabresd: Reset counter to prevent error message
mmc: fsl_esdhc: Check the result from malloc()
mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
mx6sabresd: Return error if cpu_eth_init() fails
mx6qsabreauto: Return error if cpu_eth_init() fails
net: fec_mxc: Add support for mx6 solo-lite
mx6slevk: Add Ethernet support
mx28evk: Fix checkpatch warning
doc: README.mxs: Add instruction to install 'libssl-dev'
mx6sabresd: Fix the fdt file for the mx6dl version
net: fec_mxc: Fix timeouts during tftp transfer
mx28evk: Propagate the error if cpu_eth_init() fails
mx28evk: Propagate the error if cpu_eth_init() fails
mx35pdk: Fix error handling in board_late_init()
Greg Guyotte (1):
drivers/power/pmic: Add tps65217 driver
Heiko Schocher (1):
net, phy, cpsw: fix NULL pointer deference
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: cpux9k2: increase malloc space to fix crash on start
u-boot
Jeroen Hofstee (4):
arm: prevent using movt/movw address loads
ARM,relocate: do not use r9
ARM: use r9 for gd
README: update ARM register usage
Kuo-Jung Su (1):
arm: dma_alloc_coherent: malloc() -> memalign()
Lokesh Vutla (2):
ARM: DRA7: Enable saveenv command
ARM: OMAP5: Avoid writing into LDO SRAM bits
Marek Vasut (6):
tools: mxsboot: Mark the FCB pages as valid
ARM: mxs: Sort the mx23evk and mx23_olinuxino
ARM: mxs: Document the power block initialization
ARM: mxs: Receive r0 and r1 passed from BootROM
ARM: mxs: Add Creative ZEN XFi3 board
ARM: mxs: Add SanDisk Sansa Fuze+ board
Markus Niebel (1):
ARM: arch-mx6: fix PLL2_PFD2_FREQ
Masahiro Yamada (6):
arm: spl: Do not set the stack pointer twice
ARM: s3c44b0: remove remainders of dead board
drivers: s3c44b0_i2c: delete an unused driver
drivers: serial_s3c44b0: delete an unused driver
drivers: s3c44b0_rtc: delete an unused driver
ARM: refactor compiler options in config.mk
Michal Simek (1):
arm: zynq: Fix timer loadaddress
Philip, Avinash (1):
drivers/power/pmic: Add tps65910 driver
Pierre Aubert (1):
mx6: Fix use of improper value in enable_ipu_clock
Robert P. J. Day (1):
am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so
should mmcroot.
Robert Winkler (1):
imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
Stefano Babic (1):
Merge branch 'master' of git://git.denx.de/u-boot-arm
Steve Kipisz (1):
am335x:Handle worst case scenario for Errata 1.0.24
Tom Rini (4):
spl/Makefile: Add drivers/power/pmic/libpmic to
CONFIG_SPL_POWER_SUPPORT am33xx: Add am33xx_spl_board_init function,
call am33xx: Add the efuse_sma CONTROL_MODULE register
am335x_evm: am33xx_spl_board_init function and scale core
frequency
York Sun (1):
tools/imximage.c: Fix compiling warning
trem (3):
mx27: add missing constant for mx27
apf27: add support for the armadeus APF27 board
apf27: add FPGA support for the apf27 board
README | 9 ++-
arch/arm/config.mk | 11 ++-
arch/arm/cpu/arm1136/config.mk | 1 -
arch/arm/cpu/arm1176/config.mk | 1 -
arch/arm/cpu/arm720t/config.mk | 2 -
arch/arm/cpu/arm920t/config.mk | 2 -
arch/arm/cpu/arm925t/config.mk | 2 -
arch/arm/cpu/arm926ejs/config.mk | 2 -
arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 ++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209
+++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/arm926ejs/mxs/start.S | 50
+++++++----- arch/arm/cpu/arm946es/config.mk
| 2 - arch/arm/cpu/arm_intcm/config.mk | 2 -
arch/arm/cpu/armv7/am33xx/board.c | 11 +++
arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 8 +-
arch/arm/cpu/armv7/am33xx/sys_info.c | 57
+++++++++++++ arch/arm/cpu/armv7/config.mk
| 1 - arch/arm/cpu/armv7/lowlevel_init.S | 4
+- arch/arm/cpu/armv7/mx6/clock.c | 40
+++++++-- arch/arm/cpu/armv7/omap-common/boot-common.c | 3
+ arch/arm/cpu/armv7/omap-common/clocks-common.c | 7 --
arch/arm/cpu/armv7/omap5/prcm-regs.c | 12 ---
arch/arm/cpu/armv7/rmobile/config.mk | 1 -
arch/arm/cpu/armv7/zynq/timer.c | 2 +-
arch/arm/cpu/ixp/config.mk | 2 +-
arch/arm/cpu/pxa/config.mk | 2 -
arch/arm/cpu/s3c44b0/cache.c | 74
-----------------
arch/arm/cpu/s3c44b0/config.mk | 18 -----
arch/arm/cpu/s3c44b0/cpu.c | 58
------------- arch/arm/cpu/s3c44b0/start.S |
228 ---------------------------------------------------
arch/arm/cpu/s3c44b0/timer.c | 102
-----------------------
arch/arm/cpu/sa1100/config.mk | 2 -
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 12 ++-
arch/arm/include/asm/arch-am33xx/cpu.h | 12 +++
arch/arm/include/asm/arch-am33xx/sys_proto.h | 4 +
arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +-
arch/arm/include/asm/arch-mx6/iomux.h | 5 ++
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 +-
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 +
arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 +++
arch/arm/include/asm/arch-mxs/sys_proto.h | 5 +-
arch/arm/include/asm/arch-s3c44b0/hardware.h | 281
---------------------------------------------------------------
arch/arm/include/asm/dma-mapping.h | 2 +-
arch/arm/include/asm/global_data.h | 2 +-
arch/arm/include/asm/omap_common.h | 6 --
arch/arm/lib/crt0.S | 16 ++--
arch/arm/lib/relocate.S | 6 +-
arch/arm/lib/spl.c | 3 -
board/armadeus/apf27/Makefile | 33 ++++++++
board/armadeus/apf27/apf27.c | 256
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/armadeus/apf27/apf27.h | 489
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/armadeus/apf27/fpga.c | 224
++++++++++++++++++++++++++++++++++++++++++++++++++
board/armadeus/apf27/fpga.h | 25 ++++++
board/armadeus/apf27/lowlevel_init.S | 168
++++++++++++++++++++++++++++++++++++++
board/bluegiga/apx4devkit/spl_boot.c | 4 +-
board/boundary/nitrogen6x/nitrogen6x.c | 4 +-
{arch/arm/cpu/s3c44b0 => board/creative/xfi3}/Makefile | 21 +++--
board/creative/xfi3/spl_boot.c | 134
++++++++++++++++++++++++++++++
board/creative/xfi3/xfi3.c | 224
++++++++++++++++++++++++++++++++++++++++++++++++++
board/denx/m28evk/m28evk.c | 2 +
board/denx/m28evk/spl_boot.c | 4 +-
board/freescale/mx23evk/spl_boot.c | 4 +-
board/freescale/mx28evk/iomux.c | 4 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx35pdk/mx35pdk.c | 10 +--
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +-
board/freescale/mx6sabresd/mx6sabresd.c | 169
+++++++++++++++++++++++++++++++++-----
board/freescale/mx6slevk/mx6slevk.c | 68
++++++++++++++++
board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
board/sandisk/sansa_fuze_plus/Makefile | 31 +++++++
board/sandisk/sansa_fuze_plus/sfp.c | 388
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/sandisk/sansa_fuze_plus/spl_boot.c | 140
++++++++++++++++++++++++++++++++
board/schulercontrol/sc_sps_1/spl_boot.c | 4 +-
board/ti/am335x/board.c | 146
+++++++++++++++++++++++++++++++++
boards.cfg | 3 +
doc/README.mxs | 5 ++
doc/driver-model/UDM-rtc.txt | 15 ++--
doc/driver-model/UDM-serial.txt | 16 ++--
drivers/i2c/Makefile | 1 -
drivers/i2c/s3c44b0_i2c.c | 299
-------------------------------------------------------------------
drivers/mmc/fsl_esdhc.c | 2 +
drivers/mtd/nand/mxs_nand.c | 3 +
drivers/net/cpsw.c | 10 ++-
drivers/net/fec_mxc.c | 4 +-
drivers/net/fec_mxc.h | 4 +-
drivers/power/pmic/Makefile | 2 +
drivers/power/pmic/pmic_tps65217.c | 109
+++++++++++++++++++++++++
drivers/power/pmic/pmic_tps65910.c | 83
+++++++++++++++++++
drivers/rtc/Makefile | 1 -
drivers/rtc/s3c44b0_rtc.c | 84
-------------------
drivers/serial/Makefile | 1 -
drivers/serial/serial.c | 2 -
drivers/serial/serial_s3c44b0.c | 216
-------------------------------------------------
include/configs/am335x_evm.h | 6 ++
include/configs/apf27.h | 388
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/dra7xx_evm.h | 8 +-
include/configs/eb_cpux9k2.h | 2 +-
include/configs/mx35pdk.h | 1 -
include/configs/mx6sabresd.h | 4 +
include/configs/mx6slevk.h | 14 ++++
include/configs/pcm051.h | 1 +
include/configs/sansa_fuze_plus.h | 70
++++++++++++++++
include/configs/wandboard.h | 4 +-
include/configs/xfi3.h | 69
++++++++++++++++
include/power/tps65217.h | 83
+++++++++++++++++++
include/power/tps65910.h | 77
++++++++++++++++++
spl/Makefile | 3 +-
tools/imximage.c | 8 +-
tools/mxsboot.c | 10 ++- 112
files changed, 3918 insertions(+), 1569 deletions(-) delete mode
100644 arch/arm/cpu/s3c44b0/cache.c delete mode 100644
arch/arm/cpu/s3c44b0/config.mk delete mode 100644
arch/arm/cpu/s3c44b0/cpu.c delete mode 100644
arch/arm/cpu/s3c44b0/start.S delete mode 100644
arch/arm/cpu/s3c44b0/timer.c delete mode 100644
arch/arm/include/asm/arch-s3c44b0/hardware.h create mode 100644
board/armadeus/apf27/Makefile create mode 100644
board/armadeus/apf27/apf27.c create mode 100644
board/armadeus/apf27/apf27.h create mode 100644
board/armadeus/apf27/fpga.c create mode 100644
board/armadeus/apf27/fpga.h create mode 100644
board/armadeus/apf27/lowlevel_init.S rename {arch/arm/cpu/s3c44b0 =>
board/creative/xfi3}/Makefile (60%) create mode 100644
board/creative/xfi3/spl_boot.c create mode 100644
board/creative/xfi3/xfi3.c create mode 100644
board/sandisk/sansa_fuze_plus/Makefile create mode 100644
board/sandisk/sansa_fuze_plus/sfp.c create mode 100644
board/sandisk/sansa_fuze_plus/spl_boot.c delete mode 100644
drivers/i2c/s3c44b0_i2c.c create mode 100644
drivers/power/pmic/pmic_tps65217.c create mode 100644
drivers/power/pmic/pmic_tps65910.c delete mode 100644
drivers/rtc/s3c44b0_rtc.c delete mode 100644
drivers/serial/serial_s3c44b0.c create mode 100644
include/configs/apf27.h create mode 100644
include/configs/sansa_fuze_plus.h create mode 100644
include/configs/xfi3.h create mode 100644 include/power/tps65217.h
create mode 100644 include/power/tps65910.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-09-12 15:11 ` Tom Rini
@ 2013-09-12 20:54 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2013-09-12 20:54 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Thu, 12 Sep 2013 11:11:16 -0400, Tom Rini <trini@ti.com> wrote:
> On Thu, Sep 12, 2013 at 03:18:51PM +0200, Albert ARIBAUD wrote:
>
> > Hello Tom,
> >
> > The following changes since commit
> > 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
> >
> > socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to 5480ac32171ab0e38c48c9f585fa650c7867f6a1:
> >
> > Merge branch 'u-boot-samsung/master' into
> > 'u-boot-arm/master' (2013-09-11 09:59:27 +0200)
> >
> > ----------------------------------------------------------------
> >
> > Albert ARIBAUD (1):
> > Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> >
> > Chander Kashyap (3):
> > CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and
> > update Makefiles exynos5250: Add arndale board support
> > dts: samsung: arndale: Fix include path
> >
> > Inderpal Singh (1):
> > exynos5250: arndale: Add mmc support
> >
> > Minkyu Kang (2):
> > arm: smdkc100: remove config.mk file
> > arm: goni: remove config.mk file
> >
> > Piotr Wilczek (2):
> > arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
> > drivers:power:max77686: add function to set voltage and mode
> >
> > Przemyslaw Marczak (2):
> > arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.
> > arm:goni:mmc: Add sd card detection and initialization.
> >
> > MAINTAINERS | 4 +
> > Makefile | 2 +-
> > arch/arm/include/asm/arch-exynos/gpio.h | 17 ++-
> > arch/arm/include/asm/arch-exynos/mmc.h | 6 +-
> > arch/arm/include/asm/arch-s5pc1xx/mmc.h | 6 +-
> > board/samsung/arndale/Makefile | 34 +++++
> > board/samsung/arndale/arndale.c | 101 ++++++++++++
> > board/samsung/arndale/arndale_spl.c | 50 ++++++
> > board/samsung/dts/exynos5250-arndale.dts | 39 +++++
> > board/samsung/goni/config.mk | 18 ---
> > board/samsung/goni/goni.c | 33 +++-
> > board/samsung/smdkc100/config.mk | 16 --
> > boards.cfg | 1 +
> > drivers/power/pmic/pmic_max77686.c | 192 +++++++++++++++++++++++
> > include/configs/arndale.h | 255
> > +++++++++++++++++++++++++++++++
> > include/configs/exynos5250-dt.h | 2 +-
> > include/configs/s5p_goni.h | 3 +
> > include/configs/smdkc100.h | 3 +
> > include/power/max77686_pmic.h | 26 ++++
> > tools/Makefile | 3 +- 20 files changed,
> > 766 insertions(+), 45 deletions(-) create mode 100644
> > board/samsung/arndale/Makefile create mode 100644
> > board/samsung/arndale/arndale.c create mode 100644
> > board/samsung/arndale/arndale_spl.c create mode 100644
> > board/samsung/dts/exynos5250-arndale.dts delete mode 100644
> > board/samsung/goni/config.mk delete mode 100644
> > board/samsung/smdkc100/config.mk create mode 100644
> > include/configs/arndale.h
>
> Applied to u-boot/master, thanks!
Thanks. For information, I have merged u-boot/master
back into u-boot-arm/master (fast-forwarded, actually).
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-09-12 13:18 Albert ARIBAUD
@ 2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Tom Rini @ 2013-09-12 15:11 UTC (permalink / raw)
To: u-boot
On Thu, Sep 12, 2013 at 03:18:51PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
>
> socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 5480ac32171ab0e38c48c9f585fa650c7867f6a1:
>
> Merge branch 'u-boot-samsung/master' into
> 'u-boot-arm/master' (2013-09-11 09:59:27 +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (1):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
>
> Chander Kashyap (3):
> CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and
> update Makefiles exynos5250: Add arndale board support
> dts: samsung: arndale: Fix include path
>
> Inderpal Singh (1):
> exynos5250: arndale: Add mmc support
>
> Minkyu Kang (2):
> arm: smdkc100: remove config.mk file
> arm: goni: remove config.mk file
>
> Piotr Wilczek (2):
> arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
> drivers:power:max77686: add function to set voltage and mode
>
> Przemyslaw Marczak (2):
> arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.
> arm:goni:mmc: Add sd card detection and initialization.
>
> MAINTAINERS | 4 +
> Makefile | 2 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 17 ++-
> arch/arm/include/asm/arch-exynos/mmc.h | 6 +-
> arch/arm/include/asm/arch-s5pc1xx/mmc.h | 6 +-
> board/samsung/arndale/Makefile | 34 +++++
> board/samsung/arndale/arndale.c | 101 ++++++++++++
> board/samsung/arndale/arndale_spl.c | 50 ++++++
> board/samsung/dts/exynos5250-arndale.dts | 39 +++++
> board/samsung/goni/config.mk | 18 ---
> board/samsung/goni/goni.c | 33 +++-
> board/samsung/smdkc100/config.mk | 16 --
> boards.cfg | 1 +
> drivers/power/pmic/pmic_max77686.c | 192 +++++++++++++++++++++++
> include/configs/arndale.h | 255
> +++++++++++++++++++++++++++++++
> include/configs/exynos5250-dt.h | 2 +-
> include/configs/s5p_goni.h | 3 +
> include/configs/smdkc100.h | 3 +
> include/power/max77686_pmic.h | 26 ++++
> tools/Makefile | 3 +- 20 files changed,
> 766 insertions(+), 45 deletions(-) create mode 100644
> board/samsung/arndale/Makefile create mode 100644
> board/samsung/arndale/arndale.c create mode 100644
> board/samsung/arndale/arndale_spl.c create mode 100644
> board/samsung/dts/exynos5250-arndale.dts delete mode 100644
> board/samsung/goni/config.mk delete mode 100644
> board/samsung/smdkc100/config.mk create mode 100644
> include/configs/arndale.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130912/bc21814a/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-09-12 13:18 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 5480ac32171ab0e38c48c9f585fa650c7867f6a1:
Merge branch 'u-boot-samsung/master' into
'u-boot-arm/master' (2013-09-11 09:59:27 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Chander Kashyap (3):
CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and
update Makefiles exynos5250: Add arndale board support
dts: samsung: arndale: Fix include path
Inderpal Singh (1):
exynos5250: arndale: Add mmc support
Minkyu Kang (2):
arm: smdkc100: remove config.mk file
arm: goni: remove config.mk file
Piotr Wilczek (2):
arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
drivers:power:max77686: add function to set voltage and mode
Przemyslaw Marczak (2):
arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.
arm:goni:mmc: Add sd card detection and initialization.
MAINTAINERS | 4 +
Makefile | 2 +-
arch/arm/include/asm/arch-exynos/gpio.h | 17 ++-
arch/arm/include/asm/arch-exynos/mmc.h | 6 +-
arch/arm/include/asm/arch-s5pc1xx/mmc.h | 6 +-
board/samsung/arndale/Makefile | 34 +++++
board/samsung/arndale/arndale.c | 101 ++++++++++++
board/samsung/arndale/arndale_spl.c | 50 ++++++
board/samsung/dts/exynos5250-arndale.dts | 39 +++++
board/samsung/goni/config.mk | 18 ---
board/samsung/goni/goni.c | 33 +++-
board/samsung/smdkc100/config.mk | 16 --
boards.cfg | 1 +
drivers/power/pmic/pmic_max77686.c | 192 +++++++++++++++++++++++
include/configs/arndale.h | 255
+++++++++++++++++++++++++++++++
include/configs/exynos5250-dt.h | 2 +-
include/configs/s5p_goni.h | 3 +
include/configs/smdkc100.h | 3 +
include/power/max77686_pmic.h | 26 ++++
tools/Makefile | 3 +- 20 files changed,
766 insertions(+), 45 deletions(-) create mode 100644
board/samsung/arndale/Makefile create mode 100644
board/samsung/arndale/arndale.c create mode 100644
board/samsung/arndale/arndale_spl.c create mode 100644
board/samsung/dts/exynos5250-arndale.dts delete mode 100644
board/samsung/goni/config.mk delete mode 100644
board/samsung/smdkc100/config.mk create mode 100644
include/configs/arndale.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-09-06 22:55 Albert ARIBAUD
@ 2013-09-09 14:56 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-09-09 14:56 UTC (permalink / raw)
To: u-boot
On Sat, Sep 07, 2013 at 12:55:38AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c:
>
> Prepare v2013.10-rc2 (2013-09-02 14:20:36 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
>
> socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (7):
> arm: omap3: fix SRAM copy and execution sequence
> Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
>
> Amaury Pouly (1):
> mmc: mxsmmc: Enable MMC HC support
>
> Andreas Wass (2):
> ARM: mxs: Added application UART driver
> ARM: mxs: Add mx28evk_auart_console target
>
> Bo Shen (11):
> net: macb: fix the following building warning
> arm: atmel: add gmac support for sama5d3xek board
> arm: atmel: add nand trimffs subcommand for at91sam9n12 and
> at91sam9x5 arm: sama5d3: fix smc cs related registers offset
> arm: sama5d3: remove unused define
> arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
> arm: atmel: remove the config.mk file
> gpio: atmel: fix code to use pointer for pio port
> gpio: atmel: add gpio common API support
> gpio: atmel: add copyright and remove error header info
> ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI
>
> Chin Liang See (2):
> socfpga: Adding configuration for development kit
> socfpga: Creating driver for Reset Manager
>
> Eric Nelson (6):
> i.MX6: nitrogen6x: force HDMI onto IPU0/DI0
> fec_mxc: set ethaddr if fuses burned and not previously set
> i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)
> i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register
> declarations i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1
> divisor i.MX6: Set and clear the gating bits for Phase Fractional
> Dividers
>
> Hector Palacios (1):
> ARM: mxs: rename function that sets AUTO_RESTART flag
>
> Heiko Schocher (6):
> arm, am33xx: add defines for gmii_sel_register bits
> arm, am335x: add some missing registers and defines for lcd and
> epwm support arm, spl: add watchdog library to SPL
> arm, am335x: add watchdog support
> video: add formike lcd panel init
> arm, am335x: add support for 3 siemens boards
>
> Javier Martinez Canillas (1):
> ARM: igep00x0.h: Enable raw initrd support
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: board update and enhancement
>
> Lubomir Popov (1):
> ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration
>
> Marek Vasut (3):
> ARM: mxs: tools: Add mkimage support for MXS bootstream
> tools: Sort lists of files in Makefile
> tools: mxsboot: Staticize functions
>
> Michal Simek (4):
> zynq: Add new ddrc driver for ECC support
> zynq: slcr: Wait 100ms till clk is properly setup
> zynq: Enable axi ethernet and emaclite driver initialization
> arm: lds: Remove libgcc eabi exception handling tables
>
> Oleksandr Tyshchenko (1):
> sdp4430: Initialize board id using CONFIG_MACH_TYPE
>
> SARTRE Leo (1):
> ARM: Congatec: README update
>
> Stefano Babic (7):
> tools: imx_header should not include flash_offset
> tools: rename mximage_flash_offset to imximage_ivt_offset
> tools: dynamically allocate imx_header in imximage
> tools: add variable padding of data image in mkimage
> tools: add padding of data image file for imximage
> tools: add support for setting the CSF into imximage
> imx: add status reporting for HAB status
>
> Stephen Warren (1):
> ARM: tegra: support raw ramdisks
>
> Taras Kondratiuk (3):
> ARM: OMAP4470: Add OMAP4470 identification
> ARM: OMAP4470: Add voltage and dpll data
> ARM: OMAP4460: sdp: Limit TPS mux config to 4460
>
> Thierry Reding (2):
> ARM: tegra: Make cache line size SoC specific
> ARM: tegra: Enable data cache on Dalmore
>
> Tom Rini (13):
> am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE
> TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section
> omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon
> SRAM_SCRATCH_SPACE_ADDR TI:am335x: Better comment and organize the
> networking related options am335x_evm: Add comment by SPL SPI support
> am335x_evm: Regroup USB options
> TI:armv7: Re-order slightly the generic CONFIG options, expand
> related comments am335x_evm: Update README for customization
> TI:am33xx: Move SPL YMODEM support to the per-board config
> TI:omap5: Clarify comments about SPL and DDR timings in common
> config omap5_uevm: Better comment why we have TCA642X and the reset time
> dra7xx_evm: Re-order and comment the networking related config
> options siemens-am33x-common.h: Always build CONFIG_OMAP_GPIO support
>
> Wu, Josh (6):
> ARM: at91: atmel_nand: pmecc driver will select the galois table
> by sector size ARM: at91: sama5d3: remove unused definition about PMECC
> alpha table offset linux/compat.h: move dev_err, dev_info and dev_dbg
> from usb driver to compat.h mtd: atmel_nand: alloc memory instead of
> use static array for pmecc data ARM: at91: atmel_nand: add code to
> check the ONFI parameter ECC requirement mtd: atmel_nand: pmecc: fix
> bug fail to correct bit error in 1024-bytes sector
>
> MAINTAINERS | 5 +
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 6 +
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 8 +
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 ++
> arch/arm/cpu/armv7/mx6/Makefile | 7 +-
> arch/arm/cpu/armv7/mx6/hab.c | 104 ++++++
> arch/arm/cpu/armv7/mx6/soc.c | 28 ++
> arch/arm/cpu/armv7/omap3/clock.c | 6 +-
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 36 ++
> arch/arm/cpu/armv7/omap4/hwinit.c | 3 +
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 41 ++-
> arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/misc.c | 27 --
> arch/arm/cpu/armv7/socfpga/reset_manager.c | 39 +++
> arch/arm/cpu/armv7/zynq/Makefile | 1 +
> arch/arm/cpu/armv7/zynq/ddrc.c | 50 +++
> arch/arm/cpu/armv7/zynq/slcr.c | 2 +-
> arch/arm/cpu/u-boot.lds | 2 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 74 ++++-
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 7 +
> arch/arm/include/asm/arch-am33xx/omap.h | 2 +-
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +-
> arch/arm/include/asm/arch-mx6/hab.h | 67 ++++
> arch/arm/include/asm/arch-mx6/imx-regs.h | 37 +--
> arch/arm/include/asm/arch-mx6/sys_proto.h | 7 +
> arch/arm/include/asm/arch-mxs/regs-uartapp.h | 220 +++++++++++++
> arch/arm/include/asm/arch-omap3/clock.h | 2 -
> arch/arm/include/asm/arch-omap4/clock.h | 7 +-
> arch/arm/include/asm/arch-omap4/omap.h | 1 +
> arch/arm/include/asm/arch-omap5/omap.h | 11 +-
> arch/arm/include/asm/arch-socfpga/reset_manager.h | 10 +-
> arch/arm/include/asm/arch-zynq/hardware.h | 8 +
> arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
> arch/arm/include/asm/omap_common.h | 1 +
> board/atmel/at91sam9m10g45ek/config.mk | 1 -
> board/atmel/at91sam9x5ek/config.mk | 1 -
> board/atmel/sama5d3xek/sama5d3xek.c | 20 ++
> board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
> board/congatec/cgtqmx6eval/README | 3 +-
> board/isee/igep0033/board.c | 6 +-
> board/phytec/pcm051/board.c | 2 -
> board/siemens/common/board.c | 171 ++++++++++
> board/siemens/common/factoryset.c | 284
> ++++++++++++++++ board/siemens/common/factoryset.h
> | 27 ++ board/siemens/dxr2/Makefile | 49 +++
> board/siemens/dxr2/board.c | 241
> ++++++++++++++ board/siemens/dxr2/board.h |
> 69 ++++ board/siemens/dxr2/mux.c | 112
> +++++++ board/siemens/pxm2/Makefile | 49 +++
> board/siemens/pxm2/board.c | 429
> ++++++++++++++++++++++++
> board/siemens/pxm2/board.h | 22 ++
> board/siemens/pxm2/mux.c | 186 +++++++++++
> board/siemens/pxm2/pmic.h | 71 ++++
> board/siemens/rut/Makefile | 49 +++
> board/siemens/rut/board.c | 432
> ++++++++++++++++++++++++
> board/siemens/rut/board.h | 22 ++
> board/siemens/rut/mux.c | 347
> ++++++++++++++++++++
> board/ti/am335x/README | 28 +-
> board/ti/am335x/board.c | 6 +-
> board/ti/sdp4430/sdp.c | 4 +-
> board/xilinx/zynq/board.c | 19 ++
> boards.cfg | 4 +
> common/image.c | 1 +
> config.mk | 9 +
> doc/README.SPL | 2 +-
> doc/README.atmel_pmecc | 14 -
> doc/README.imximage | 30 +-
> doc/README.mxc_hab | 48 +++
> doc/README.mxsimage | 165 ++++++++++
> drivers/gpio/at91_gpio.c | 295
> ++++++++++------- drivers/mmc/mxsmmc.c
> | 3 +- drivers/mtd/nand/atmel_nand.c | 201
> +++++++++++- drivers/net/fec_mxc.c | 2
> + drivers/net/macb.c | 12 +-
> drivers/serial/Makefile | 1 +
> drivers/serial/mxs_auart.c | 151 +++++++++
> drivers/serial/serial.c | 2 +
> drivers/usb/musb-new/linux-compat.h | 16 -
> drivers/video/Makefile | 1 +
> drivers/video/formike.c | 511
> +++++++++++++++++++++++++++++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/omap_wdt.c | 121 +++++++
> include/configs/am335x_evm.h | 93 +++---
> include/configs/at91sam9m10g45ek.h | 2 +
> include/configs/at91sam9n12ek.h | 3 +
> include/configs/at91sam9x5ek.h | 5 +-
> include/configs/dalmore.h | 3 -
> include/configs/dra7xx_evm.h | 18 +-
> include/configs/dxr2.h | 94 ++++++
> include/configs/eb_cpux9k2.h | 62 ++--
> include/configs/igep00x0.h | 1 +
> include/configs/mxs.h | 7 +-
> include/configs/omap4_sdp4430.h | 1 +
> include/configs/omap5_common.h | 19 +-
> include/configs/omap5_uevm.h | 3 +
> include/configs/pxm2.h | 153 +++++++++
> include/configs/rut.h | 156 +++++++++
> include/configs/sama5d3xek.h | 11 +-
> include/configs/siemens-am33x-common.h | 461
> ++++++++++++++++++++++++++
> include/configs/socfpga_cyclone5.h | 28 +-
> include/configs/tegra-common.h | 3 +-
> include/configs/tegra114-common.h | 3 +
> include/configs/tegra20-common.h | 3 +
> include/configs/tegra30-common.h | 3 +
> include/configs/ti_am335x_common.h | 22 +-
> include/configs/ti_armv7_common.h | 26 +-
> include/image.h | 1 +
> include/linux/compat.h | 8 +
> include/video.h | 4 +
> spl/Makefile | 1 +
> tools/Makefile | 42 +--
> tools/imximage.c | 180 +++++++++-
> tools/imximage.h | 20 +-
> tools/logos/siemens.bmp | Bin 0 -> 25766
> bytes tools/mkimage.c | 26 +-
> tools/mkimage.h | 6 +-
> tools/mxsboot.c | 12 +-
> tools/mxsimage.c | 2347
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tools/mxsimage.h | 230
> +++++++++++++ 124 files changed, 8726 insertions(+), 453 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg create
> mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg create mode
> 100644 arch/arm/cpu/armv7/mx6/hab.c create mode 100644
> arch/arm/cpu/armv7/socfpga/reset_manager.c create mode 100644
> arch/arm/cpu/armv7/zynq/ddrc.c create mode 100644
> arch/arm/include/asm/arch-mx6/hab.h create mode 100644
> arch/arm/include/asm/arch-mxs/regs-uartapp.h delete mode 100644
> board/atmel/at91sam9m10g45ek/config.mk delete mode 100644
> board/atmel/at91sam9x5ek/config.mk create mode 100644
> board/siemens/common/board.c create mode 100644
> board/siemens/common/factoryset.c create mode 100644
> board/siemens/common/factoryset.h create mode 100644
> board/siemens/dxr2/Makefile create mode 100644
> board/siemens/dxr2/board.c create mode 100644
> board/siemens/dxr2/board.h create mode 100644 board/siemens/dxr2/mux.c
> create mode 100644 board/siemens/pxm2/Makefile create mode 100644
> board/siemens/pxm2/board.c create mode 100644
> board/siemens/pxm2/board.h create mode 100644 board/siemens/pxm2/mux.c
> create mode 100644 board/siemens/pxm2/pmic.h create mode 100644
> board/siemens/rut/Makefile create mode 100644
> board/siemens/rut/board.c create mode 100644 board/siemens/rut/board.h
> create mode 100644 board/siemens/rut/mux.c create mode 100644
> doc/README.mxc_hab create mode 100644 doc/README.mxsimage create mode
> 100644 drivers/serial/mxs_auart.c create mode 100644
> drivers/video/formike.c create mode 100644 drivers/watchdog/omap_wdt.c
> create mode 100644 include/configs/dxr2.h create mode 100644
> include/configs/pxm2.h create mode 100644 include/configs/rut.h
> create mode 100644 include/configs/siemens-am33x-common.h
> create mode 100644 tools/logos/siemens.bmp
> create mode 100644 tools/mxsimage.c
> create mode 100644 tools/mxsimage.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130909/546f1dd6/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-09-06 22:55 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c:
Prepare v2013.10-rc2 (2013-09-02 14:20:36 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
----------------------------------------------------------------
Albert ARIBAUD (7):
arm: omap3: fix SRAM copy and execution sequence
Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
Amaury Pouly (1):
mmc: mxsmmc: Enable MMC HC support
Andreas Wass (2):
ARM: mxs: Added application UART driver
ARM: mxs: Add mx28evk_auart_console target
Bo Shen (11):
net: macb: fix the following building warning
arm: atmel: add gmac support for sama5d3xek board
arm: atmel: add nand trimffs subcommand for at91sam9n12 and
at91sam9x5 arm: sama5d3: fix smc cs related registers offset
arm: sama5d3: remove unused define
arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
arm: atmel: remove the config.mk file
gpio: atmel: fix code to use pointer for pio port
gpio: atmel: add gpio common API support
gpio: atmel: add copyright and remove error header info
ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI
Chin Liang See (2):
socfpga: Adding configuration for development kit
socfpga: Creating driver for Reset Manager
Eric Nelson (6):
i.MX6: nitrogen6x: force HDMI onto IPU0/DI0
fec_mxc: set ethaddr if fuses burned and not previously set
i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)
i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register
declarations i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1
divisor i.MX6: Set and clear the gating bits for Phase Fractional
Dividers
Hector Palacios (1):
ARM: mxs: rename function that sets AUTO_RESTART flag
Heiko Schocher (6):
arm, am33xx: add defines for gmii_sel_register bits
arm, am335x: add some missing registers and defines for lcd and
epwm support arm, spl: add watchdog library to SPL
arm, am335x: add watchdog support
video: add formike lcd panel init
arm, am335x: add support for 3 siemens boards
Javier Martinez Canillas (1):
ARM: igep00x0.h: Enable raw initrd support
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: cpux9k2: board update and enhancement
Lubomir Popov (1):
ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration
Marek Vasut (3):
ARM: mxs: tools: Add mkimage support for MXS bootstream
tools: Sort lists of files in Makefile
tools: mxsboot: Staticize functions
Michal Simek (4):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization
arm: lds: Remove libgcc eabi exception handling tables
Oleksandr Tyshchenko (1):
sdp4430: Initialize board id using CONFIG_MACH_TYPE
SARTRE Leo (1):
ARM: Congatec: README update
Stefano Babic (7):
tools: imx_header should not include flash_offset
tools: rename mximage_flash_offset to imximage_ivt_offset
tools: dynamically allocate imx_header in imximage
tools: add variable padding of data image in mkimage
tools: add padding of data image file for imximage
tools: add support for setting the CSF into imximage
imx: add status reporting for HAB status
Stephen Warren (1):
ARM: tegra: support raw ramdisks
Taras Kondratiuk (3):
ARM: OMAP4470: Add OMAP4470 identification
ARM: OMAP4470: Add voltage and dpll data
ARM: OMAP4460: sdp: Limit TPS mux config to 4460
Thierry Reding (2):
ARM: tegra: Make cache line size SoC specific
ARM: tegra: Enable data cache on Dalmore
Tom Rini (13):
am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE
TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section
omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon
SRAM_SCRATCH_SPACE_ADDR TI:am335x: Better comment and organize the
networking related options am335x_evm: Add comment by SPL SPI support
am335x_evm: Regroup USB options
TI:armv7: Re-order slightly the generic CONFIG options, expand
related comments am335x_evm: Update README for customization
TI:am33xx: Move SPL YMODEM support to the per-board config
TI:omap5: Clarify comments about SPL and DDR timings in common
config omap5_uevm: Better comment why we have TCA642X and the reset time
dra7xx_evm: Re-order and comment the networking related config
options siemens-am33x-common.h: Always build CONFIG_OMAP_GPIO support
Wu, Josh (6):
ARM: at91: atmel_nand: pmecc driver will select the galois table
by sector size ARM: at91: sama5d3: remove unused definition about PMECC
alpha table offset linux/compat.h: move dev_err, dev_info and dev_dbg
from usb driver to compat.h mtd: atmel_nand: alloc memory instead of
use static array for pmecc data ARM: at91: atmel_nand: add code to
check the ONFI parameter ECC requirement mtd: atmel_nand: pmecc: fix
bug fail to correct bit error in 1024-bytes sector
MAINTAINERS | 5 +
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 6 +
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 8 +
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 ++
arch/arm/cpu/armv7/mx6/Makefile | 7 +-
arch/arm/cpu/armv7/mx6/hab.c | 104 ++++++
arch/arm/cpu/armv7/mx6/soc.c | 28 ++
arch/arm/cpu/armv7/omap3/clock.c | 6 +-
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +-
arch/arm/cpu/armv7/omap4/hw_data.c | 36 ++
arch/arm/cpu/armv7/omap4/hwinit.c | 3 +
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 41 ++-
arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
arch/arm/cpu/armv7/socfpga/misc.c | 27 --
arch/arm/cpu/armv7/socfpga/reset_manager.c | 39 +++
arch/arm/cpu/armv7/zynq/Makefile | 1 +
arch/arm/cpu/armv7/zynq/ddrc.c | 50 +++
arch/arm/cpu/armv7/zynq/slcr.c | 2 +-
arch/arm/cpu/u-boot.lds | 2 +
arch/arm/include/asm/arch-am33xx/cpu.h | 74 ++++-
arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 7 +
arch/arm/include/asm/arch-am33xx/omap.h | 2 +-
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +-
arch/arm/include/asm/arch-mx6/hab.h | 67 ++++
arch/arm/include/asm/arch-mx6/imx-regs.h | 37 +--
arch/arm/include/asm/arch-mx6/sys_proto.h | 7 +
arch/arm/include/asm/arch-mxs/regs-uartapp.h | 220 +++++++++++++
arch/arm/include/asm/arch-omap3/clock.h | 2 -
arch/arm/include/asm/arch-omap4/clock.h | 7 +-
arch/arm/include/asm/arch-omap4/omap.h | 1 +
arch/arm/include/asm/arch-omap5/omap.h | 11 +-
arch/arm/include/asm/arch-socfpga/reset_manager.h | 10 +-
arch/arm/include/asm/arch-zynq/hardware.h | 8 +
arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
arch/arm/include/asm/omap_common.h | 1 +
board/atmel/at91sam9m10g45ek/config.mk | 1 -
board/atmel/at91sam9x5ek/config.mk | 1 -
board/atmel/sama5d3xek/sama5d3xek.c | 20 ++
board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
board/congatec/cgtqmx6eval/README | 3 +-
board/isee/igep0033/board.c | 6 +-
board/phytec/pcm051/board.c | 2 -
board/siemens/common/board.c | 171 ++++++++++
board/siemens/common/factoryset.c | 284
++++++++++++++++ board/siemens/common/factoryset.h
| 27 ++ board/siemens/dxr2/Makefile | 49 +++
board/siemens/dxr2/board.c | 241
++++++++++++++ board/siemens/dxr2/board.h |
69 ++++ board/siemens/dxr2/mux.c | 112
+++++++ board/siemens/pxm2/Makefile | 49 +++
board/siemens/pxm2/board.c | 429
++++++++++++++++++++++++
board/siemens/pxm2/board.h | 22 ++
board/siemens/pxm2/mux.c | 186 +++++++++++
board/siemens/pxm2/pmic.h | 71 ++++
board/siemens/rut/Makefile | 49 +++
board/siemens/rut/board.c | 432
++++++++++++++++++++++++
board/siemens/rut/board.h | 22 ++
board/siemens/rut/mux.c | 347
++++++++++++++++++++
board/ti/am335x/README | 28 +-
board/ti/am335x/board.c | 6 +-
board/ti/sdp4430/sdp.c | 4 +-
board/xilinx/zynq/board.c | 19 ++
boards.cfg | 4 +
common/image.c | 1 +
config.mk | 9 +
doc/README.SPL | 2 +-
doc/README.atmel_pmecc | 14 -
doc/README.imximage | 30 +-
doc/README.mxc_hab | 48 +++
doc/README.mxsimage | 165 ++++++++++
drivers/gpio/at91_gpio.c | 295
++++++++++------- drivers/mmc/mxsmmc.c
| 3 +- drivers/mtd/nand/atmel_nand.c | 201
+++++++++++- drivers/net/fec_mxc.c | 2
+ drivers/net/macb.c | 12 +-
drivers/serial/Makefile | 1 +
drivers/serial/mxs_auart.c | 151 +++++++++
drivers/serial/serial.c | 2 +
drivers/usb/musb-new/linux-compat.h | 16 -
drivers/video/Makefile | 1 +
drivers/video/formike.c | 511
+++++++++++++++++++++++++++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/omap_wdt.c | 121 +++++++
include/configs/am335x_evm.h | 93 +++---
include/configs/at91sam9m10g45ek.h | 2 +
include/configs/at91sam9n12ek.h | 3 +
include/configs/at91sam9x5ek.h | 5 +-
include/configs/dalmore.h | 3 -
include/configs/dra7xx_evm.h | 18 +-
include/configs/dxr2.h | 94 ++++++
include/configs/eb_cpux9k2.h | 62 ++--
include/configs/igep00x0.h | 1 +
include/configs/mxs.h | 7 +-
include/configs/omap4_sdp4430.h | 1 +
include/configs/omap5_common.h | 19 +-
include/configs/omap5_uevm.h | 3 +
include/configs/pxm2.h | 153 +++++++++
include/configs/rut.h | 156 +++++++++
include/configs/sama5d3xek.h | 11 +-
include/configs/siemens-am33x-common.h | 461
++++++++++++++++++++++++++
include/configs/socfpga_cyclone5.h | 28 +-
include/configs/tegra-common.h | 3 +-
include/configs/tegra114-common.h | 3 +
include/configs/tegra20-common.h | 3 +
include/configs/tegra30-common.h | 3 +
include/configs/ti_am335x_common.h | 22 +-
include/configs/ti_armv7_common.h | 26 +-
include/image.h | 1 +
include/linux/compat.h | 8 +
include/video.h | 4 +
spl/Makefile | 1 +
tools/Makefile | 42 +--
tools/imximage.c | 180 +++++++++-
tools/imximage.h | 20 +-
tools/logos/siemens.bmp | Bin 0 -> 25766
bytes tools/mkimage.c | 26 +-
tools/mkimage.h | 6 +-
tools/mxsboot.c | 12 +-
tools/mxsimage.c | 2347
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/mxsimage.h | 230
+++++++++++++ 124 files changed, 8726 insertions(+), 453 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg create
mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg create mode
100644 arch/arm/cpu/armv7/mx6/hab.c create mode 100644
arch/arm/cpu/armv7/socfpga/reset_manager.c create mode 100644
arch/arm/cpu/armv7/zynq/ddrc.c create mode 100644
arch/arm/include/asm/arch-mx6/hab.h create mode 100644
arch/arm/include/asm/arch-mxs/regs-uartapp.h delete mode 100644
board/atmel/at91sam9m10g45ek/config.mk delete mode 100644
board/atmel/at91sam9x5ek/config.mk create mode 100644
board/siemens/common/board.c create mode 100644
board/siemens/common/factoryset.c create mode 100644
board/siemens/common/factoryset.h create mode 100644
board/siemens/dxr2/Makefile create mode 100644
board/siemens/dxr2/board.c create mode 100644
board/siemens/dxr2/board.h create mode 100644 board/siemens/dxr2/mux.c
create mode 100644 board/siemens/pxm2/Makefile create mode 100644
board/siemens/pxm2/board.c create mode 100644
board/siemens/pxm2/board.h create mode 100644 board/siemens/pxm2/mux.c
create mode 100644 board/siemens/pxm2/pmic.h create mode 100644
board/siemens/rut/Makefile create mode 100644
board/siemens/rut/board.c create mode 100644 board/siemens/rut/board.h
create mode 100644 board/siemens/rut/mux.c create mode 100644
doc/README.mxc_hab create mode 100644 doc/README.mxsimage create mode
100644 drivers/serial/mxs_auart.c create mode 100644
drivers/video/formike.c create mode 100644 drivers/watchdog/omap_wdt.c
create mode 100644 include/configs/dxr2.h create mode 100644
include/configs/pxm2.h create mode 100644 include/configs/rut.h
create mode 100644 include/configs/siemens-am33x-common.h
create mode 100644 tools/logos/siemens.bmp
create mode 100644 tools/mxsimage.c
create mode 100644 tools/mxsimage.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-06-21 21:52 Albert ARIBAUD
@ 2013-06-24 20:17 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-06-24 20:17 UTC (permalink / raw)
To: u-boot
On Fri, Jun 21, 2013 at 11:52:51PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 847e6693ccb529bf8346db62876f38f0c4e04ade:
>
> arm: pxa: config option for PXA270 turbo mode (2013-06-12 22:24:12
> +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to fbf87b1823dd5ebc2a384711ea2c677543019ece:
>
> arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
>
> ----------------------------------------------------------------
> Akshay Saraswat (2):
> Exynos5: clock: Update the equation to calculate PLL output
> frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
>
> Albert ARIBAUD (8):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> arm: ensure u-boot only uses relative relocations
> remove all references to .dynsym
> arm: generalize lib/bss.c into lib/sections.c
> arm: make __image_copy_{start, end} compiler-generated
> arm: make __rel_dyn_{start, end} compiler-generated
> arm: optimize relocate_code routine
>
> Amar (9):
> FDT: Add compatible string for DWMMC
> EXYNOS5: FDT: Add DWMMC device node data
> DWMMC: Initialise dwmci and resolve EMMC read write issues
> EXYNOS5: DWMMC: Added FDT support for DWMMC
> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted
> results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
> MMC: APIs to support resize of EMMC boot partition
> SMDK5250: Enable EMMC booting
> COMMON: MMC: Command to support EMMC booting and to resize EMMC
> boot partition
>
> Arkadiusz Wlodarczyk (1):
> arm:trats: change auto-booting to boot kernel with separate
> device tree blob
>
> Dan Murphy (5):
> arm: omap: Add check for fdtfile in the findfdt macro
> arm: omap5_uevm: Correct the console sys prompt for 5432
> arm: dra7xx: Update the EXTRA_ENV_SETTINGS
> arm: omap4: panda: Add reading of the board revision
> arm: omap4: panda: Fix checkpatch on panda file
>
> Heiko Schocher (3):
> arm, am33xx: move rtc32k_enable() to common place
> arm, am335x: make mpu pll config configurable
> arm, am33xx: move uart soft reset code to common place
>
> Inderpal Singh (3):
> exynos: move tzpc_init to armv7/exynos
> exynos: update tzpc to make it common for exynos4 and exynos5
> exynos: Update origen and smdkv310 to use common tzpc_init
>
> Naveen Krishna Chatradhi (2):
> power: exynos-tmu: fix warnings and clean up code
> power: exynos-tmu: use the mux_addr bit fields in tmu_control
> register
>
> Rajeshwari Shinde (3):
> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
> SMDK5250: Enable SPI Gigabyte device.
> MMC: DWMMC: Fix FIFO_DEPTH calculation
>
> Simon Guinot (3):
> net2big_v2: initialize I2C fan at startup
> LaCie/common: add support for the CPLD GPIO bus
> net2big_v2: initialize LEDs at startup
>
> Makefile | 7 +
> arch/arm/config.mk | 5 +
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 6 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 5 -
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 5 -
> arch/arm/cpu/armv7/am33xx/board.c | 40 ++
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 9 +-
> arch/arm/cpu/armv7/exynos/Makefile | 2 +-
> arch/arm/cpu/armv7/exynos/clock.c | 10 +-
> .../arm/cpu/armv7/exynos/tzpc.c | 25 +-
> arch/arm/cpu/armv7/s5p-common/Makefile | 2 +
> arch/arm/cpu/ixp/u-boot.lds | 20 +-
> arch/arm/cpu/u-boot-spl.lds | 6 +-
> arch/arm/cpu/u-boot.lds | 21 +-
> arch/arm/dts/exynos5250.dtsi | 33 ++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 4 +
> arch/arm/include/asm/arch-exynos/cpu.h | 4 +
> arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +-
> arch/arm/include/asm/arch-exynos/tmu.h | 58 ++-
> arch/arm/include/asm/arch-exynos/tzpc.h | 20 +
> arch/arm/lib/Makefile | 2 +-
> arch/arm/lib/relocate.S | 61 +--
> arch/arm/lib/{bss.c => sections.c} | 8 +-
> board/LaCie/common/cpld-gpio-bus.c | 50 +++
> board/LaCie/common/cpld-gpio-bus.h | 24 ++
> board/LaCie/net2big_v2/Makefile | 3 +
> board/LaCie/net2big_v2/net2big_v2.c | 154 +++++++-
> board/LaCie/net2big_v2/net2big_v2.h | 5 +
> board/actux1/u-boot.lds | 20 +-
> board/actux2/u-boot.lds | 20 +-
> board/actux3/u-boot.lds | 20 +-
> board/ait/cam_enc_4xx/u-boot-spl.lds | 5 -
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 -
> board/davinci/da8xxevm/u-boot-spl-hawk.lds | 1 -
> board/dvlhost/u-boot.lds | 20 +-
> board/freescale/mx31ads/u-boot.lds | 20 +-
> board/isee/igep0033/board.c | 40 +-
> board/phytec/pcm051/board.c | 39 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 24 ++
> board/samsung/origen/lowlevel_init.S | 44 +--
> board/samsung/origen/origen_setup.h | 25 --
> board/samsung/smdk5250/Makefile | 5 +-
> board/samsung/smdk5250/clock_init.c | 18 +
> board/samsung/smdk5250/clock_init.h | 5 +
> board/samsung/smdk5250/exynos5-dt.c | 423
> +++++++++++++++++++++
> board/samsung/smdk5250/lowlevel_init.S | 2 +
> board/samsung/smdk5250/setup.h | 25 --
> board/samsung/smdk5250/smdk5250.c | 223 +++--------
> board/samsung/smdk5250/spl_boot.c | 64 +++-
> board/samsung/smdkv310/lowlevel_init.S | 60 +--
> board/ti/am335x/board.c | 39 +-
> board/ti/panda/panda.c | 104 ++++-
> board/ti/ti814x/evm.c | 35 +-
> board/vpac270/u-boot-spl.lds | 6 +-
> common/cmd_mmc.c | 109 +++++-
> doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++
> drivers/mmc/dw_mmc.c | 27 +-
> drivers/mmc/exynos_dw_mmc.c | 127 ++++++-
> drivers/mmc/mmc.c | 134 +++++++
> drivers/mtd/spi/Makefile | 1 +
> drivers/mtd/spi/gigadevice.c | 81 ++++
> drivers/mtd/spi/spi_flash.c | 3 +
> drivers/mtd/spi/spi_flash_internal.h | 1 +
> drivers/power/exynos-tmu.c | 123 +++---
> drivers/serial/serial_s5p.c | 13 +-
> drivers/video/exynos_fb.c | 4 +-
> include/asm-generic/sections.h | 3 -
> include/configs/am335x_evm.h | 7 +-
> include/configs/dra7xx_evm.h | 3 +
> include/configs/exynos5250-dt.h | 11 +-
> include/configs/lacie_kw.h | 9 +-
> include/configs/omap4_common.h | 7 +-
> include/configs/omap5_common.h | 9 +-
> include/configs/omap5_uevm.h | 4 +-
> include/configs/origen.h | 2 +
> include/configs/smdkv310.h | 2 +
> include/configs/trats.h | 17 +-
> include/dwmmc.h | 3 +
> include/fdtdec.h | 1 +
> include/mmc.h | 26 ++
> lib/fdtdec.c | 1 +
> spl/Makefile | 8 + 82 files
> changed, 1899 insertions(+), 783 deletions(-) rename
> board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c
> (69%) rename arch/arm/lib/{bss.c => sections.c} (79%) create mode
> 100644 board/LaCie/common/cpld-gpio-bus.c create mode 100644
> board/LaCie/common/cpld-gpio-bus.h create mode 100644
> board/samsung/smdk5250/exynos5-dt.c create mode 100644
> doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644
> drivers/mtd/spi/gigadevice.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130624/79b01222/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-06-21 21:52 Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-06-21 21:52 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
847e6693ccb529bf8346db62876f38f0c4e04ade:
arm: pxa: config option for PXA270 turbo mode (2013-06-12 22:24:12
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to fbf87b1823dd5ebc2a384711ea2c677543019ece:
arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output
frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Albert ARIBAUD (8):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
arm: ensure u-boot only uses relative relocations
remove all references to .dynsym
arm: generalize lib/bss.c into lib/sections.c
arm: make __image_copy_{start, end} compiler-generated
arm: make __rel_dyn_{start, end} compiler-generated
arm: optimize relocate_code routine
Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted
results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC
boot partition
Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate
device tree blob
Dan Murphy (5):
arm: omap: Add check for fdtfile in the findfdt macro
arm: omap5_uevm: Correct the console sys prompt for 5432
arm: dra7xx: Update the EXTRA_ENV_SETTINGS
arm: omap4: panda: Add reading of the board revision
arm: omap4: panda: Fix checkpatch on panda file
Heiko Schocher (3):
arm, am33xx: move rtc32k_enable() to common place
arm, am335x: make mpu pll config configurable
arm, am33xx: move uart soft reset code to common place
Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control
register
Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.
MMC: DWMMC: Fix FIFO_DEPTH calculation
Simon Guinot (3):
net2big_v2: initialize I2C fan at startup
LaCie/common: add support for the CPLD GPIO bus
net2big_v2: initialize LEDs at startup
Makefile | 7 +
arch/arm/config.mk | 5 +
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 6 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 5 -
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 5 -
arch/arm/cpu/armv7/am33xx/board.c | 40 ++
arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 9 +-
arch/arm/cpu/armv7/exynos/Makefile | 2 +-
arch/arm/cpu/armv7/exynos/clock.c | 10 +-
.../arm/cpu/armv7/exynos/tzpc.c | 25 +-
arch/arm/cpu/armv7/s5p-common/Makefile | 2 +
arch/arm/cpu/ixp/u-boot.lds | 20 +-
arch/arm/cpu/u-boot-spl.lds | 6 +-
arch/arm/cpu/u-boot.lds | 21 +-
arch/arm/dts/exynos5250.dtsi | 33 ++
arch/arm/include/asm/arch-am33xx/sys_proto.h | 4 +
arch/arm/include/asm/arch-exynos/cpu.h | 4 +
arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +-
arch/arm/include/asm/arch-exynos/tmu.h | 58 ++-
arch/arm/include/asm/arch-exynos/tzpc.h | 20 +
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/relocate.S | 61 +--
arch/arm/lib/{bss.c => sections.c} | 8 +-
board/LaCie/common/cpld-gpio-bus.c | 50 +++
board/LaCie/common/cpld-gpio-bus.h | 24 ++
board/LaCie/net2big_v2/Makefile | 3 +
board/LaCie/net2big_v2/net2big_v2.c | 154 +++++++-
board/LaCie/net2big_v2/net2big_v2.h | 5 +
board/actux1/u-boot.lds | 20 +-
board/actux2/u-boot.lds | 20 +-
board/actux3/u-boot.lds | 20 +-
board/ait/cam_enc_4xx/u-boot-spl.lds | 5 -
board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 -
board/davinci/da8xxevm/u-boot-spl-hawk.lds | 1 -
board/dvlhost/u-boot.lds | 20 +-
board/freescale/mx31ads/u-boot.lds | 20 +-
board/isee/igep0033/board.c | 40 +-
board/phytec/pcm051/board.c | 39 +-
board/samsung/dts/exynos5250-smdk5250.dts | 24 ++
board/samsung/origen/lowlevel_init.S | 44 +--
board/samsung/origen/origen_setup.h | 25 --
board/samsung/smdk5250/Makefile | 5 +-
board/samsung/smdk5250/clock_init.c | 18 +
board/samsung/smdk5250/clock_init.h | 5 +
board/samsung/smdk5250/exynos5-dt.c | 423
+++++++++++++++++++++
board/samsung/smdk5250/lowlevel_init.S | 2 +
board/samsung/smdk5250/setup.h | 25 --
board/samsung/smdk5250/smdk5250.c | 223 +++--------
board/samsung/smdk5250/spl_boot.c | 64 +++-
board/samsung/smdkv310/lowlevel_init.S | 60 +--
board/ti/am335x/board.c | 39 +-
board/ti/panda/panda.c | 104 ++++-
board/ti/ti814x/evm.c | 35 +-
board/vpac270/u-boot-spl.lds | 6 +-
common/cmd_mmc.c | 109 +++++-
doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++
drivers/mmc/dw_mmc.c | 27 +-
drivers/mmc/exynos_dw_mmc.c | 127 ++++++-
drivers/mmc/mmc.c | 134 +++++++
drivers/mtd/spi/Makefile | 1 +
drivers/mtd/spi/gigadevice.c | 81 ++++
drivers/mtd/spi/spi_flash.c | 3 +
drivers/mtd/spi/spi_flash_internal.h | 1 +
drivers/power/exynos-tmu.c | 123 +++---
drivers/serial/serial_s5p.c | 13 +-
drivers/video/exynos_fb.c | 4 +-
include/asm-generic/sections.h | 3 -
include/configs/am335x_evm.h | 7 +-
include/configs/dra7xx_evm.h | 3 +
include/configs/exynos5250-dt.h | 11 +-
include/configs/lacie_kw.h | 9 +-
include/configs/omap4_common.h | 7 +-
include/configs/omap5_common.h | 9 +-
include/configs/omap5_uevm.h | 4 +-
include/configs/origen.h | 2 +
include/configs/smdkv310.h | 2 +
include/configs/trats.h | 17 +-
include/dwmmc.h | 3 +
include/fdtdec.h | 1 +
include/mmc.h | 26 ++
lib/fdtdec.c | 1 +
spl/Makefile | 8 + 82 files
changed, 1899 insertions(+), 783 deletions(-) rename
board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c
(69%) rename arch/arm/lib/{bss.c => sections.c} (79%) create mode
100644 board/LaCie/common/cpld-gpio-bus.c create mode 100644
board/LaCie/common/cpld-gpio-bus.h create mode 100644
board/samsung/smdk5250/exynos5-dt.c create mode 100644
doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644
drivers/mtd/spi/gigadevice.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-06-13 15:49 Albert ARIBAUD
@ 2013-06-14 15:11 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-06-14 15:11 UTC (permalink / raw)
To: u-boot
On Thu, Jun 13, 2013 at 05:49:43PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 4596dcc1d4ea5763e0f92cf5becd9fc7d4c6e674:
>
> am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
> (2013-06-05 08:46:49 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 847e6693ccb529bf8346db62876f38f0c4e04ade:
>
> arm: pxa: config option for PXA270 turbo mode (2013-06-12 22:24:12
> +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (2):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>
> Alison Wang (7):
> arm: vf610: Add IOMUX support for Vybrid VF610
> arm: vf610: Add Vybrid VF610 CPU support
> net: fec_mxc: Add support for Vybrid VF610
> arm: vf610: Add watchdog support for Vybrid VF610
> arm: vf610: Add uart support for Vybrid VF610
> arm: vf610: Add Vybrid VF610 to mxc_ocotp document
> arm: vf610: Add basic support for Vybrid VF610TWR board
>
> Andrew Gabbasov (1):
> mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio
> CS signal
>
> Andrii Tseglytskyi (2):
> OMAP3+: introduce generic ABB support
> OMAP5: add ABB setup for MPU voltage domain
>
> Balaji T K (1):
> mmc: omap_hsmmc: Update pbias programming
>
> Beno??t Th??baudeau (1):
> imx: spl: Merge libimx-common make rules
>
> Fabio Estevam (7):
> mx28evk: Add splash screen support
> mx23evk: Add splash screen support
> video: mxsfb: Add an entry for mx23evk/mx28vk video modes
> mx6slevk: Allow booting a device tree kernel
> wandboard: Enable HDMI splashscreen
> ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
> vf610twr: Drop unneeded 'status' variable
>
> Holger Brunck (1):
> arm/km: make local functions static
>
> Joel A Fernandes (1):
> am33xx: Board: Make CPSW section of ethernet initialization
> depend on CPSW driver
>
> Lokesh Vutla (10):
> ARM: OMAP4+: Cleanup header files
> ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h
> ARM: OMAP4+: pmic: Make generic bus init and write functions
> ARM: DRA7xx: Add control id code for DRA7xx
> ARM: DRA7xx: power Add support for tps659038 PMIC
> ARM: DRA7xx: clocks: Fixing i2c_init for PMIC
> ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's
> ARM: DRA7xx: Update pinmux data
> ARM: DRA7xx: clocks: Update PLL values
> ARM: DRA7: Add Maintainer
>
> Lubomir Popov (4):
> OMAP5: Fix bug in omap5_es1_prcm struct
> ARM: OMAP5: Power: Add more functionality to Palmas driver
> ARM: OMAP: I2C: New read, write and probe functions
> OMAP5: Enable access to auxclk registers
>
> Luka Perkov (1):
> wandboard: fix typo in README
>
> Marek Vasut (1):
> arm: mxs: Fix vectoring table crafting
>
> Masahiro Yamada (1):
> cosmetic: arm: fix comments in arch/arm/lib/crt0.S
>
> Nishanth Menon (1):
> ARM: OMAP5: DRA7xx: support class 0 optimized voltages
>
> Otavio Salvador (2):
> build: Use generic boot logo matching
> wandboard: Add Boot Splash image with Wandboard logo
>
> Renato Frias (2):
> mx6qsabreauto: Add i2c to mx6qsabreauto board
> mx6qsabreauto: Add Port Expander reset
>
> SARTRE Leo (1):
> Add support for Congatec Conga-QEVAl board
>
> Sergey Yanovich (2):
> arm: pxa: Add support for ICP DAS LP-8x4x
> arm: pxa: config option for PXA270 turbo mode
>
> Sricharan R (5):
> ARM: OMAP5: clocks: Do not enable sgx clocks
> ARM: DRA7xx: Change the Debug UART to UART1
> ARM: DRA7xx: Correct the SYS_CLK to 20MHZ
> ARM: DRA7xx: Correct SRAM END address
> ARM: DRA7xx: EMIF: Change settings required for EVM board
>
> Tom Rini (1):
> arm: Remove OMAP2420H4 and all omap24xx support
>
> Tom Warren (1):
> ARM: tegra: only enable SCU on Tegra20
>
> Vishwanathrao Badarkhe, Manish (2):
> da830: add MMC support
> arm: da830: moved pinmux configurations to the arch tree
>
> MAINTAINERS | 20 ++-
> Makefile | 2 +-
> arch/arm/cpu/arm1136/start.S | 18 ---
> arch/arm/cpu/arm926ejs/davinci/Makefile | 1 +
> arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c | 151
> ++++++++++++++++++++++
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 25 +++-
> arch/arm/cpu/armv7/omap-common/Makefile | 1 +
> arch/arm/cpu/armv7/omap-common/abb.c | 137
> ++++++++++++++++++++
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 101
> ++++++++++++--- arch/arm/cpu/armv7/omap-common/emif-common.c
> | 28 ++++- arch/arm/cpu/armv7/omap-common/hwinit-common.c
> | 2 - arch/arm/cpu/armv7/omap-common/timer.c | 1
> + arch/arm/cpu/armv7/omap-common/vc.c | 14 ++-
> arch/arm/cpu/armv7/omap3/clock.c | 2 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 13 +-
> arch/arm/cpu/armv7/omap4/prcm-regs.c | 3 +
> arch/arm/cpu/armv7/omap5/Makefile | 1 +
> arch/arm/cpu/armv7/omap5/abb.c | 67
> ++++++++++ arch/arm/cpu/armv7/omap5/hw_data.c |
> 167 ++++++++++++++++++-------
> arch/arm/cpu/armv7/omap5/hwinit.c | 24 ++--
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 20 +++
> arch/arm/cpu/armv7/omap5/sdram.c | 170
> +++++++++++++++++++++++--
> arch/arm/cpu/armv7/vf610/Makefile | 42 +++++++
> arch/arm/cpu/armv7/vf610/generic.c | 324
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/vf610/timer.c | 103
> +++++++++++++++ arch/arm/cpu/pxa/pxa2xx.c
> | 2 +- arch/arm/cpu/tegra-common/ap.c | 4
> + arch/arm/imx-common/Makefile | 2 +-
> arch/arm/imx-common/iomux-v3.c | 6 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 15 ++-
> arch/arm/include/asm/arch-omap24xx/bits.h | 48 -------
> arch/arm/include/asm/arch-omap24xx/clocks.h | 112
> -----------------
> arch/arm/include/asm/arch-omap24xx/i2c.h | 68
> ---------- arch/arm/include/asm/arch-omap24xx/mem.h |
> 156 -----------------------
> arch/arm/include/asm/arch-omap24xx/mux.h | 176
> --------------------------
> arch/arm/include/asm/arch-omap24xx/omap2420.h | 236
> -----------------------------------
> arch/arm/include/asm/arch-omap24xx/sys_info.h | 82
> ------------ arch/arm/include/asm/arch-omap24xx/sys_proto.h |
> 54 -------- arch/arm/include/asm/arch-omap3/{clocks.h => clock.h} |
> 0 arch/arm/include/asm/arch-omap3/omap3.h | 7 ++
> arch/arm/include/asm/arch-omap4/{clocks.h => clock.h} | 34 +----
> arch/arm/include/asm/arch-omap4/cpu.h | 12 --
> arch/arm/include/asm/arch-omap4/omap.h | 22 ++--
> arch/arm/include/asm/arch-omap4/sys_proto.h | 5 +-
> arch/arm/include/asm/arch-omap5/{clocks.h => clock.h} | 91
> +++++++++++--- arch/arm/include/asm/arch-omap5/cpu.h
> | 12 -- arch/arm/include/asm/arch-omap5/mux_dra7xx.h | 7
> +- arch/arm/include/asm/arch-omap5/omap.h | 67
> +++++----- arch/arm/include/asm/arch-omap5/sys_proto.h |
> 7 +- arch/arm/include/asm/arch-vf610/clock.h | 39
> ++++++ arch/arm/include/asm/arch-vf610/crm_regs.h | 225
> +++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-vf610/imx-regs.h | 419
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 101
> +++++++++++++++ arch/arm/include/asm/emif.h
> | 12 +- arch/arm/include/asm/imx-common/iomux-v3.h | 18
> +++ arch/arm/include/asm/omap_common.h | 59
> ++++++++- arch/arm/lib/cache.c | 2
> +- arch/arm/lib/crt0.S | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 1 -
> board/congatec/cgtqmx6eval/Makefile | 42 +++++++
> board/congatec/cgtqmx6eval/README | 29 +++++
> board/congatec/cgtqmx6eval/cgtqmx6eval.c | 167
> +++++++++++++++++++++++++
> board/davinci/da8xxevm/da830evm.c | 155
> +++++++----------------
> board/freescale/mx23evk/mx23evk.c | 6 +
> board/freescale/mx23evk/spl_boot.c | 32 +++++
> board/freescale/mx28evk/iomux.c | 33 +++++
> board/freescale/mx28evk/mx28evk.c | 6 +
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 57 +++++++++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 1 -
> board/freescale/vf610twr/Makefile | 39 ++++++
> board/freescale/vf610twr/imximage.cfg | 33 +++++
> board/freescale/vf610twr/vf610twr.c | 407
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/htkw/mcx/mcx.c | 2 +-
> board/{ti/omap2420h4 => icpdas/lp8x4x}/Makefile | 16 +--
> board/icpdas/lp8x4x/lp8x4x.c | 147
> ++++++++++++++++++++++
> board/keymile/km_arm/km_arm.c | 4 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
> board/ti/am335x/board.c | 2 +
> board/ti/dra7xx/mux_data.h | 38 +++---
> board/ti/omap2420h4/config.mk | 28 -----
> board/ti/omap2420h4/lowlevel_init.S | 185
> ---------------------------
> board/ti/omap2420h4/mem.c | 362
> -----------------------------------------------------
> board/ti/omap2420h4/omap2420h4.c | 867
> -------------------------------------------------------------------------------------------------------------------------------
> board/ti/omap2420h4/sys_info.c | 387
> ---------------------------------------------------------
> board/ti/omap5_uevm/evm.c | 12 +-
> board/ti/panda/panda.c | 22 ++--
> board/ti/sdp4430/sdp.c | 16 ++-
> board/wandboard/README | 4 +-
> board/wandboard/wandboard.c | 98
> +++++++++++++++ boards.cfg
> | 4 +- doc/README.mxc_ocotp | 1
> + doc/README.scrapyard | 1 +
> doc/README.vf610 | 10 ++
> drivers/i2c/omap24xx_i2c.c | 490
> ++++++++++++++++++++++++++++++++++++++++++++----------------------------
> drivers/mmc/omap_hsmmc.c | 20 ++-
> drivers/net/fec_mxc.c | 4 +-
> drivers/power/palmas.c | 133
> ++++++++++++++++++--
> drivers/serial/Makefile | 1 +
> drivers/serial/ns16550.c | 5 -
> drivers/serial/serial_lpuart.c | 132
> ++++++++++++++++++++
> drivers/serial/serial_ns16550.c | 5 -
> drivers/usb/musb/omap3.c | 4 +-
> drivers/video/mxsfb.c | 5 +
> drivers/watchdog/Makefile | 2 +-
> include/configs/cgtqmx6eval.h | 194
> +++++++++++++++++++++++++++++
> include/configs/da830evm.h | 25 +++-
> include/configs/dra7xx_evm.h | 8 +-
> include/configs/lp8x4x.h | 262
> +++++++++++++++++++++++++++++++++++++++
> include/configs/mx23evk.h | 17 +++
> include/configs/mx28evk.h | 17 +++
> include/configs/mx53ard.h | 3 +-
> include/configs/mx6qsabre_common.h | 2 +-
> include/configs/mx6qsabreauto.h | 7 +-
> include/configs/mx6qsabresd.h | 1 -
> include/configs/mx6slevk.h | 2 +-
> include/configs/omap2420h4.h | 264
> ---------------------------------------
> include/configs/omap4_common.h | 4 -
> include/configs/omap5_common.h | 12 +-
> include/configs/omap5_uevm.h | 7 +-
> include/configs/vf610twr.h | 140
> +++++++++++++++++++++
> include/configs/wandboard.h | 20 ++-
> include/palmas.h | 90
> ++++++++++++-- spl/Makefile
> | 6 +- tools/Makefile | 27
> ++-- tools/logos/wandboard.bmp | Bin 0 ->
> 22390 bytes 125 files changed, 4926 insertions(+), 3740 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/abb.c create mode
> 100644 arch/arm/cpu/armv7/omap5/abb.c create mode 100644
> arch/arm/cpu/armv7/vf610/Makefile create mode 100644
> arch/arm/cpu/armv7/vf610/generic.c create mode 100644
> arch/arm/cpu/armv7/vf610/timer.c delete mode 100644
> arch/arm/include/asm/arch-omap24xx/bits.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/clocks.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/i2c.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/mem.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/mux.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/omap2420.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/sys_info.h delete mode 100644
> arch/arm/include/asm/arch-omap24xx/sys_proto.h rename
> arch/arm/include/asm/arch-omap3/{clocks.h => clock.h} (100%) rename
> arch/arm/include/asm/arch-omap4/{clocks.h => clock.h} (90%) rename
> arch/arm/include/asm/arch-omap5/{clocks.h => clock.h} (73%) create
> mode 100644 arch/arm/include/asm/arch-vf610/clock.h create mode 100644
> arch/arm/include/asm/arch-vf610/crm_regs.h create mode 100644
> arch/arm/include/asm/arch-vf610/imx-regs.h create mode 100644
> arch/arm/include/asm/arch-vf610/iomux-vf610.h create mode 100644
> board/congatec/cgtqmx6eval/Makefile create mode 100644
> board/congatec/cgtqmx6eval/README create mode 100644
> board/congatec/cgtqmx6eval/cgtqmx6eval.c create mode 100644
> board/freescale/vf610twr/Makefile create mode 100644
> board/freescale/vf610twr/imximage.cfg create mode 100644
> board/freescale/vf610twr/vf610twr.c rename board/{ti/omap2420h4 =>
> icpdas/lp8x4x}/Makefile (73%) create mode 100644
> board/icpdas/lp8x4x/lp8x4x.c delete mode 100644
> board/ti/omap2420h4/config.mk delete mode 100644
> board/ti/omap2420h4/lowlevel_init.S delete mode 100644
> board/ti/omap2420h4/mem.c delete mode 100644
> board/ti/omap2420h4/omap2420h4.c delete mode 100644
> board/ti/omap2420h4/sys_info.c create mode 100644 doc/README.vf610
> create mode 100644 drivers/serial/serial_lpuart.c create mode 100644
> include/configs/cgtqmx6eval.h create mode 100644
> include/configs/lp8x4x.h delete mode 100644
> include/configs/omap2420h4.h create mode 100644
> include/configs/vf610twr.h create mode 100644 tools/logos/wandboard.bmp
Booted on am335x_evm and applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130614/c744c3ee/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-06-13 15:49 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
4596dcc1d4ea5763e0f92cf5becd9fc7d4c6e674:
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
(2013-06-05 08:46:49 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 847e6693ccb529bf8346db62876f38f0c4e04ade:
arm: pxa: config option for PXA270 turbo mode (2013-06-12 22:24:12
+0200)
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Alison Wang (7):
arm: vf610: Add IOMUX support for Vybrid VF610
arm: vf610: Add Vybrid VF610 CPU support
net: fec_mxc: Add support for Vybrid VF610
arm: vf610: Add watchdog support for Vybrid VF610
arm: vf610: Add uart support for Vybrid VF610
arm: vf610: Add Vybrid VF610 to mxc_ocotp document
arm: vf610: Add basic support for Vybrid VF610TWR board
Andrew Gabbasov (1):
mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio
CS signal
Andrii Tseglytskyi (2):
OMAP3+: introduce generic ABB support
OMAP5: add ABB setup for MPU voltage domain
Balaji T K (1):
mmc: omap_hsmmc: Update pbias programming
Beno?t Th?baudeau (1):
imx: spl: Merge libimx-common make rules
Fabio Estevam (7):
mx28evk: Add splash screen support
mx23evk: Add splash screen support
video: mxsfb: Add an entry for mx23evk/mx28vk video modes
mx6slevk: Allow booting a device tree kernel
wandboard: Enable HDMI splashscreen
ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
vf610twr: Drop unneeded 'status' variable
Holger Brunck (1):
arm/km: make local functions static
Joel A Fernandes (1):
am33xx: Board: Make CPSW section of ethernet initialization
depend on CPSW driver
Lokesh Vutla (10):
ARM: OMAP4+: Cleanup header files
ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h
ARM: OMAP4+: pmic: Make generic bus init and write functions
ARM: DRA7xx: Add control id code for DRA7xx
ARM: DRA7xx: power Add support for tps659038 PMIC
ARM: DRA7xx: clocks: Fixing i2c_init for PMIC
ARM: DRA7xx: Do not enable srcomp for DRA7xx Soc's
ARM: DRA7xx: Update pinmux data
ARM: DRA7xx: clocks: Update PLL values
ARM: DRA7: Add Maintainer
Lubomir Popov (4):
OMAP5: Fix bug in omap5_es1_prcm struct
ARM: OMAP5: Power: Add more functionality to Palmas driver
ARM: OMAP: I2C: New read, write and probe functions
OMAP5: Enable access to auxclk registers
Luka Perkov (1):
wandboard: fix typo in README
Marek Vasut (1):
arm: mxs: Fix vectoring table crafting
Masahiro Yamada (1):
cosmetic: arm: fix comments in arch/arm/lib/crt0.S
Nishanth Menon (1):
ARM: OMAP5: DRA7xx: support class 0 optimized voltages
Otavio Salvador (2):
build: Use generic boot logo matching
wandboard: Add Boot Splash image with Wandboard logo
Renato Frias (2):
mx6qsabreauto: Add i2c to mx6qsabreauto board
mx6qsabreauto: Add Port Expander reset
SARTRE Leo (1):
Add support for Congatec Conga-QEVAl board
Sergey Yanovich (2):
arm: pxa: Add support for ICP DAS LP-8x4x
arm: pxa: config option for PXA270 turbo mode
Sricharan R (5):
ARM: OMAP5: clocks: Do not enable sgx clocks
ARM: DRA7xx: Change the Debug UART to UART1
ARM: DRA7xx: Correct the SYS_CLK to 20MHZ
ARM: DRA7xx: Correct SRAM END address
ARM: DRA7xx: EMIF: Change settings required for EVM board
Tom Rini (1):
arm: Remove OMAP2420H4 and all omap24xx support
Tom Warren (1):
ARM: tegra: only enable SCU on Tegra20
Vishwanathrao Badarkhe, Manish (2):
da830: add MMC support
arm: da830: moved pinmux configurations to the arch tree
MAINTAINERS | 20 ++-
Makefile | 2 +-
arch/arm/cpu/arm1136/start.S | 18 ---
arch/arm/cpu/arm926ejs/davinci/Makefile | 1 +
arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c | 151
++++++++++++++++++++++
arch/arm/cpu/arm926ejs/mxs/mxs.c | 25 +++-
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/abb.c | 137
++++++++++++++++++++
arch/arm/cpu/armv7/omap-common/clocks-common.c | 101
++++++++++++--- arch/arm/cpu/armv7/omap-common/emif-common.c
| 28 ++++- arch/arm/cpu/armv7/omap-common/hwinit-common.c
| 2 - arch/arm/cpu/armv7/omap-common/timer.c | 1
+ arch/arm/cpu/armv7/omap-common/vc.c | 14 ++-
arch/arm/cpu/armv7/omap3/clock.c | 2 +-
arch/arm/cpu/armv7/omap4/hw_data.c | 13 +-
arch/arm/cpu/armv7/omap4/prcm-regs.c | 3 +
arch/arm/cpu/armv7/omap5/Makefile | 1 +
arch/arm/cpu/armv7/omap5/abb.c | 67
++++++++++ arch/arm/cpu/armv7/omap5/hw_data.c |
167 ++++++++++++++++++-------
arch/arm/cpu/armv7/omap5/hwinit.c | 24 ++--
arch/arm/cpu/armv7/omap5/prcm-regs.c | 20 +++
arch/arm/cpu/armv7/omap5/sdram.c | 170
+++++++++++++++++++++++--
arch/arm/cpu/armv7/vf610/Makefile | 42 +++++++
arch/arm/cpu/armv7/vf610/generic.c | 324
++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/vf610/timer.c | 103
+++++++++++++++ arch/arm/cpu/pxa/pxa2xx.c
| 2 +- arch/arm/cpu/tegra-common/ap.c | 4
+ arch/arm/imx-common/Makefile | 2 +-
arch/arm/imx-common/iomux-v3.c | 6 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 15 ++-
arch/arm/include/asm/arch-omap24xx/bits.h | 48 -------
arch/arm/include/asm/arch-omap24xx/clocks.h | 112
-----------------
arch/arm/include/asm/arch-omap24xx/i2c.h | 68
---------- arch/arm/include/asm/arch-omap24xx/mem.h |
156 -----------------------
arch/arm/include/asm/arch-omap24xx/mux.h | 176
--------------------------
arch/arm/include/asm/arch-omap24xx/omap2420.h | 236
-----------------------------------
arch/arm/include/asm/arch-omap24xx/sys_info.h | 82
------------ arch/arm/include/asm/arch-omap24xx/sys_proto.h |
54 -------- arch/arm/include/asm/arch-omap3/{clocks.h => clock.h} |
0 arch/arm/include/asm/arch-omap3/omap3.h | 7 ++
arch/arm/include/asm/arch-omap4/{clocks.h => clock.h} | 34 +----
arch/arm/include/asm/arch-omap4/cpu.h | 12 --
arch/arm/include/asm/arch-omap4/omap.h | 22 ++--
arch/arm/include/asm/arch-omap4/sys_proto.h | 5 +-
arch/arm/include/asm/arch-omap5/{clocks.h => clock.h} | 91
+++++++++++--- arch/arm/include/asm/arch-omap5/cpu.h
| 12 -- arch/arm/include/asm/arch-omap5/mux_dra7xx.h | 7
+- arch/arm/include/asm/arch-omap5/omap.h | 67
+++++----- arch/arm/include/asm/arch-omap5/sys_proto.h |
7 +- arch/arm/include/asm/arch-vf610/clock.h | 39
++++++ arch/arm/include/asm/arch-vf610/crm_regs.h | 225
+++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 419
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-vf610/iomux-vf610.h | 101
+++++++++++++++ arch/arm/include/asm/emif.h
| 12 +- arch/arm/include/asm/imx-common/iomux-v3.h | 18
+++ arch/arm/include/asm/omap_common.h | 59
++++++++- arch/arm/lib/cache.c | 2
+- arch/arm/lib/crt0.S | 4 +-
board/boundary/nitrogen6x/nitrogen6x.c | 1 -
board/congatec/cgtqmx6eval/Makefile | 42 +++++++
board/congatec/cgtqmx6eval/README | 29 +++++
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 167
+++++++++++++++++++++++++
board/davinci/da8xxevm/da830evm.c | 155
+++++++----------------
board/freescale/mx23evk/mx23evk.c | 6 +
board/freescale/mx23evk/spl_boot.c | 32 +++++
board/freescale/mx28evk/iomux.c | 33 +++++
board/freescale/mx28evk/mx28evk.c | 6 +
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 57 +++++++++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 1 -
board/freescale/vf610twr/Makefile | 39 ++++++
board/freescale/vf610twr/imximage.cfg | 33 +++++
board/freescale/vf610twr/vf610twr.c | 407
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/htkw/mcx/mcx.c | 2 +-
board/{ti/omap2420h4 => icpdas/lp8x4x}/Makefile | 16 +--
board/icpdas/lp8x4x/lp8x4x.c | 147
++++++++++++++++++++++
board/keymile/km_arm/km_arm.c | 4 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/ti/am335x/board.c | 2 +
board/ti/dra7xx/mux_data.h | 38 +++---
board/ti/omap2420h4/config.mk | 28 -----
board/ti/omap2420h4/lowlevel_init.S | 185
---------------------------
board/ti/omap2420h4/mem.c | 362
-----------------------------------------------------
board/ti/omap2420h4/omap2420h4.c | 867
-------------------------------------------------------------------------------------------------------------------------------
board/ti/omap2420h4/sys_info.c | 387
---------------------------------------------------------
board/ti/omap5_uevm/evm.c | 12 +-
board/ti/panda/panda.c | 22 ++--
board/ti/sdp4430/sdp.c | 16 ++-
board/wandboard/README | 4 +-
board/wandboard/wandboard.c | 98
+++++++++++++++ boards.cfg
| 4 +- doc/README.mxc_ocotp | 1
+ doc/README.scrapyard | 1 +
doc/README.vf610 | 10 ++
drivers/i2c/omap24xx_i2c.c | 490
++++++++++++++++++++++++++++++++++++++++++++----------------------------
drivers/mmc/omap_hsmmc.c | 20 ++-
drivers/net/fec_mxc.c | 4 +-
drivers/power/palmas.c | 133
++++++++++++++++++--
drivers/serial/Makefile | 1 +
drivers/serial/ns16550.c | 5 -
drivers/serial/serial_lpuart.c | 132
++++++++++++++++++++
drivers/serial/serial_ns16550.c | 5 -
drivers/usb/musb/omap3.c | 4 +-
drivers/video/mxsfb.c | 5 +
drivers/watchdog/Makefile | 2 +-
include/configs/cgtqmx6eval.h | 194
+++++++++++++++++++++++++++++
include/configs/da830evm.h | 25 +++-
include/configs/dra7xx_evm.h | 8 +-
include/configs/lp8x4x.h | 262
+++++++++++++++++++++++++++++++++++++++
include/configs/mx23evk.h | 17 +++
include/configs/mx28evk.h | 17 +++
include/configs/mx53ard.h | 3 +-
include/configs/mx6qsabre_common.h | 2 +-
include/configs/mx6qsabreauto.h | 7 +-
include/configs/mx6qsabresd.h | 1 -
include/configs/mx6slevk.h | 2 +-
include/configs/omap2420h4.h | 264
---------------------------------------
include/configs/omap4_common.h | 4 -
include/configs/omap5_common.h | 12 +-
include/configs/omap5_uevm.h | 7 +-
include/configs/vf610twr.h | 140
+++++++++++++++++++++
include/configs/wandboard.h | 20 ++-
include/palmas.h | 90
++++++++++++-- spl/Makefile
| 6 +- tools/Makefile | 27
++-- tools/logos/wandboard.bmp | Bin 0 ->
22390 bytes 125 files changed, 4926 insertions(+), 3740 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
create mode 100644 arch/arm/cpu/armv7/omap-common/abb.c create mode
100644 arch/arm/cpu/armv7/omap5/abb.c create mode 100644
arch/arm/cpu/armv7/vf610/Makefile create mode 100644
arch/arm/cpu/armv7/vf610/generic.c create mode 100644
arch/arm/cpu/armv7/vf610/timer.c delete mode 100644
arch/arm/include/asm/arch-omap24xx/bits.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/clocks.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/i2c.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/mem.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/mux.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/omap2420.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/sys_info.h delete mode 100644
arch/arm/include/asm/arch-omap24xx/sys_proto.h rename
arch/arm/include/asm/arch-omap3/{clocks.h => clock.h} (100%) rename
arch/arm/include/asm/arch-omap4/{clocks.h => clock.h} (90%) rename
arch/arm/include/asm/arch-omap5/{clocks.h => clock.h} (73%) create
mode 100644 arch/arm/include/asm/arch-vf610/clock.h create mode 100644
arch/arm/include/asm/arch-vf610/crm_regs.h create mode 100644
arch/arm/include/asm/arch-vf610/imx-regs.h create mode 100644
arch/arm/include/asm/arch-vf610/iomux-vf610.h create mode 100644
board/congatec/cgtqmx6eval/Makefile create mode 100644
board/congatec/cgtqmx6eval/README create mode 100644
board/congatec/cgtqmx6eval/cgtqmx6eval.c create mode 100644
board/freescale/vf610twr/Makefile create mode 100644
board/freescale/vf610twr/imximage.cfg create mode 100644
board/freescale/vf610twr/vf610twr.c rename board/{ti/omap2420h4 =>
icpdas/lp8x4x}/Makefile (73%) create mode 100644
board/icpdas/lp8x4x/lp8x4x.c delete mode 100644
board/ti/omap2420h4/config.mk delete mode 100644
board/ti/omap2420h4/lowlevel_init.S delete mode 100644
board/ti/omap2420h4/mem.c delete mode 100644
board/ti/omap2420h4/omap2420h4.c delete mode 100644
board/ti/omap2420h4/sys_info.c create mode 100644 doc/README.vf610
create mode 100644 drivers/serial/serial_lpuart.c create mode 100644
include/configs/cgtqmx6eval.h create mode 100644
include/configs/lp8x4x.h delete mode 100644
include/configs/omap2420h4.h create mode 100644
include/configs/vf610twr.h create mode 100644 tools/logos/wandboard.bmp
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] pull request: u-boot-arm/master
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
@ 2013-06-07 18:20 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-06-07 18:20 UTC (permalink / raw)
To: u-boot
On Wed, Jun 05, 2013 at 05:02:02PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 3da0e5750b24a9491058df6126c7be577a276c09:
>
> arm: factorize relocate_code routine (2013-05-30 20:24:38 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 4596dcc1d4ea5763e0f92cf5becd9fc7d4c6e674:
>
> am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
> (2013-06-05 08:46:49 -0400)
>
> ----------------------------------------------------------------
> Tom Rini (3):
> omap-common/hwinit-common.c: Mark omap_rev_string as static
> am33xx: Correct NON_SECURE_SRAM_START/END
> am33xx/omap: Move save_omap_boot_params to
> omap-common/boot-common.c
>
> arch/arm/cpu/armv7/omap-common/boot-common.c | 39
> ++++++++++++++++++++++++
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 38
> +---------------------- arch/arm/include/asm/arch-am33xx/omap.h
> | 4 +-- arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap4/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap5/sys_proto.h | 1 +
> board/isee/igep0033/board.c | 9 ++++++
> board/phytec/pcm051/board.c | 9 ++++++
> board/ti/am335x/board.c | 9 ++++++
> board/ti/ti814x/evm.c | 9 ++++++
> include/configs/am335x_evm.h | 10 ++++--
> include/configs/igep0033.h | 10 ++++--
> include/configs/pcm051.h | 10 ++++-- 13 files
> changed, 105 insertions(+), 45 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130607/14517a20/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] pull request: u-boot-arm/master
@ 2013-06-05 15:02 Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-06-05 15:02 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
3da0e5750b24a9491058df6126c7be577a276c09:
arm: factorize relocate_code routine (2013-05-30 20:24:38 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 4596dcc1d4ea5763e0f92cf5becd9fc7d4c6e674:
am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
(2013-06-05 08:46:49 -0400)
----------------------------------------------------------------
Tom Rini (3):
omap-common/hwinit-common.c: Mark omap_rev_string as static
am33xx: Correct NON_SECURE_SRAM_START/END
am33xx/omap: Move save_omap_boot_params to
omap-common/boot-common.c
arch/arm/cpu/armv7/omap-common/boot-common.c | 39
++++++++++++++++++++++++
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 38
+---------------------- arch/arm/include/asm/arch-am33xx/omap.h
| 4 +-- arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap5/sys_proto.h | 1 +
board/isee/igep0033/board.c | 9 ++++++
board/phytec/pcm051/board.c | 9 ++++++
board/ti/am335x/board.c | 9 ++++++
board/ti/ti814x/evm.c | 9 ++++++
include/configs/am335x_evm.h | 10 ++++--
include/configs/igep0033.h | 10 ++++--
include/configs/pcm051.h | 10 ++++-- 13 files
changed, 105 insertions(+), 45 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
@ 2013-05-31 20:51 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-05-31 20:51 UTC (permalink / raw)
To: u-boot
On Thu, May 30, 2013 at 09:29:21PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> a71d45d706a5b51c348160163b6c159632273fed:
>
> powerpc/mpc85xx: Clear L1 D-cache lock (2013-05-24 16:54:14 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 3da0e5750b24a9491058df6126c7be577a276c09:
>
> arm: factorize relocate_code routine (2013-05-30 20:24:38 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (9):
> Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Revert wrong removal of nand_init and nand_deselect
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> mx31pdk: copy SPL directly, not using relocate_code.
> tx25: copy SPL directly, not using relocate_code.
> arm: do not compile relocate_code() for SPL builds
> arm: factorize relocate_code routine
>
> Allen Martin (1):
> Tegra: clk: always use find_best_divider() for periph clocks
>
> Andre Przywara (2):
> ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
> ARM: vexpress: enable bootz and hush parser for all VExpress
> boards
>
> Andreas Bie??mann (1):
> at91sam9260ek: move board id setup to config header
>
> Axel Lin (2):
> ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for
> cpu_init_crit tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
>
> Beno??t Th??baudeau (40):
> imx: Homogenize and fix fuse register definitions
> imx: Add useful fuse definitions
> Add fuse API and commands
> Add fsl_iim driver
> mpc: iim: Switch to common fsl_iim
> mx51evk: Enable support for iim
> Add mxc_ocotp driver
> mx6qsabrelite: Enable support for ocotp
> nitrogen6x: Enable support for ocotp
> imx: Document fuse assignments for MAC addresses
> imx: iomux-v3: Fix common pad control definitions
> imx: iomux-v3: cosmetic: Reorganize definitions
> imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
> imx: iomux-v3: Include PKE and PUE to pad control pull definitions
> imx: iomux-v3: Add iomux-mx25.h
> imx: mx25pdk: Convert to iomux-v3
> imx: mx25pdk: Fix GPIO assignments
> imx: tx25: Convert to iomux-v3
> imx: zmx25: Convert to iomux-v3
> imx: mx25: Remove legacy iomux support
> imx: iomux-v3: Add iomux-mx35.h
> imx: flea3: Convert to iomux-v3
> imx: mx35pdk: Fix WDOG_RST iomux function
> imx: mx35pdk: Convert to iomux-v3
> imx: woodburn: Convert to iomux-v3
> imx: mx35: Remove legacy iomux support
> imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
> imx: iomux-v3: Add missing definitions to iomux-mx51.h
> imx: mx51evk: Convert to iomux-v3
> imx: mx51_efikamx/sb: Convert to iomux-v3
> imx: vision2: Convert to iomux-v3
> imx: iomux-v3: Add iomux-mx53.h
> imx: ima3-mx53: Convert to iomux-v3
> imx: mx53ard: Convert to iomux-v3
> imx: mx53evk: Convert to iomux-v3
> imx: mx53loco: Convert to iomux-v3
> imx: mx53smd: Convert to iomux-v3
> imx: m53evk: Convert to iomux-v3
> imx: mx5: Remove legacy iomux support
> imx: mx35pdk: Fix MUX2_CTR GPIO
>
> Bo Shen (9):
> spi: atmel_spi: using ip version to check whether has wdrbt
> mmc: atmel_mci: using IP version for different setting
> mmc: atmel_mci: add mmc card support
> ARM: at91: add Atmel sama5d3 SoC new pmc register
> USB: ohci-at91: support sama5d3x devices
> ARM: atmel: add sama5d3xek support
> ARM: at91: fix and update README.at91 document
> ARM: at91: add at91sam9x5 and sama5d3x information
> ARM: at91: add NAND partition table and index
>
> Dan Murphy (2):
> ARM:Panda:Fix device tree loading for the panda-es
> ARM: Panda: Add flag to allow runtime enviroment varibale mods
>
> David Andrey (3):
> arm: zynq: U-Boot udelay < 1000 FIX
> net: gem: Pass phy address to init
> net: gem: Preserve clk on emio interface
>
> Enric Balletbo i Serra (2):
> Add DDR3 support for IGEP COM AQUILA/CYGNUS.
> ARM: Add support for IGEP COM AQUILA/CYGNUS
>
> Eric Benard (3):
> mx28evk: add trimffs to nand command
> da850: provide davinci_enable_uart0
> davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
>
> Fabio Estevam (22):
> iomux-v3: Place pad control definitions into common file
> mx6: Add solo-lite variant support
> mx6sl: Add initial support for mx6slevk board
> imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
> nitrogen6x: Setup CCM_CCOSR register
> mx51evk: Update environment in order to allow booting a dt kernel
> mx51evk: Do not force the rootfs type
> mx5: Define a common get_board_rev()
> mx5: Select CONFIG_REVISION_TAG
> mx53ard: Move register masks into imx-regs.h
> mx23: Put back RAM voltage level to its original value
> mx23: Fix pad voltage selection bit
> mx23evk: Fix DDR pin iomux settings
> mx23_olinuxino: Fix DDR pin iomux settings
> mxs: spl_mem_init: Fix comment about start bit
> mxs: spl_mem_init: Remove erroneous DDR setting
> mxs: spl_mem_init: Skip the initialization of some DRAM_CTL
> registers mxs: spl_mem_init: Change EMI port priority
> mx23: Operate DDR voltage supply at 2.5V
> mx23evk: Do not set voltage selection bit for SSP pads
> mx23_olinuxino: Do not set voltage selection bit for SSP pads
> mxs: Explain why some mx23 DDR registers are not configured
>
> Igor Grinberg (3):
> cm-t35: move cm-t35 to live in compulab directory
> MAINTAINERS: fix the cm-t35 board name
> cm-t35: update config file
>
> Lokesh Vutla (2):
> arm: omap: emif: Fix DDR3 init after warm reset
> ARM: OMAP5: Fix warm reset with USB cable connected
>
> Lubomir Popov (4):
> OMAP5: I2C: Enable i2c5 clocks
> OMAP5: I2C: Add I2C4 and I2C5 bases
> OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
> OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
>
> Marek Vasut (13):
> tools: arm: imx: Implement BOOT_OFFSET command for imximage
> imx: Align the imximage header and payload to multiples of 4k
> nand: Add SPL_NAND support to mxc_nand_spl
> arm: imx: Pack u-boot.bin into uImage for SPL
> arm: mx5: Add SPL support code to MX5
> arm: mx5: Add NAND clock handling
> arm: mx5: Add support for DENX M53EVK
> arm: mx23: Fix VDDMEM misconfiguration
> arm: mxs: Preprocess u-boot.bd so they contain full path
> arm: mxs: Add LCDIF clock configuration function
> arm: mxs: Add LCDIF registers for i.MX233
> arm: mxs: Add MXS LCDIF driver
> arm: mxs: video: Enable MXS LCDIF on M28EVK
>
> Mark Jackson (1):
> Remove duplicate / unused #defines on AM335x boards
>
> Matt Porter (4):
> am33xx: add pll and clock support for TI814x CPSW
> cpsw: add support for TI814x slave_regs differences
> phy: add support for ET1011C phys
> ti814x_evm: enable CPSW support
>
> Michal Simek (20):
> arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC
> addresses zynq: Move scutimer baseaddr to hardware.h
> net: phy: Define Marvell 88e1518 phy
> net: gem: Remove WRAP bit from TX buffer description
> net: gem: Simplify return path in zynq_gem_recv
> net: gem: Do not initialize BDs again
> net: gem: Fix gem driver on 1Gbps LAN
> zynq: Move macros to hardware.h
> net: gem: Add support for phy autodetection
> mmc: Add support for Xilinx Zynq sdhci controller
> i2c: zynq: Add support for Xilinx Zynq
> fpga: Clean coding style
> fpga: Fix debug message compilation error
> cmd: fpga: Clean coding style
> cmd: fpga: Move fpga_loadbitstream to fpga.c
> fpga: Change the first parameter in fpga_loadbitstream
> cmd: fpga: Do not include net.h
> fpga: zynq: Add support for loading bitstream
> fpga: Check device name against bitstream name
> fpga: Remove all CONFIG_SYS_* fpga related options
>
> Mike Dunn (5):
> lib: import bitrev library from the linux kernel
> pxa_lcd: add the ACX544AKN lcd device
> pxa_lcd: make lcd_enable() a weak pointer
> pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> mtd: nand: add driver for diskonchip g4 nand flash
>
> Nishanth Menon (10):
> twl4030: make twl4030_i2c_write_u8 prototype consistent
> twl4030: make twl4030_i2c_read_u8 prototype consistent
> twl6030: twl6030_i2c_[read|write]_u8 prototype consistent
> twl6030: move twl6030 register access functions to common header
> file twl6030: add header guard
> twl6035: rename to palmas
> palmas: rename init_settings to an generic palmas init
> palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic
> function palmas: use palmas_i2c_[read|write]_u8
> palmas: add header guard
>
> Otavio Salvador (9):
> mx6qsabre{sd, auto}: Add update_sd_firmware support
> mx6qsabresd: Return status when initializing MMC
> wandboard: Use env storage info for mmcdev/mmcpart
> wandboard: Add update_sd_firmware support
> wandboard: Add card detection for SOM MicroSD card
> wandboard: Add support for Carrier Board MicroSD card
> wandboard: Add boot selection support
> mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
> mx53ard: Rework default environment to support FDT, MMC and
> netboot
>
> Philip Paeps (2):
> mx35 iomux: correct offsets of IOMUX registers
> mx35 iomux: correct input select register index
>
> Ryan Harkin (2):
> ARM: vexpress: refactoring of Versatile Express CA9x4 support
> ARM: vexpress: create A5 specific board config
>
> SRICHARAN R (5):
> ARM: OMAP: Make omap_boot_parameters common across socs
> ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
> ARM: OMAP: Correct save_boot_params and replace with 'C' function
> ARM: OMAP: Cleanup boot parameters usage
> ARM: OMAP: Add arch_cpu_init function
>
> Shawn Guo (1):
> ARM: mx6: define CONFIG_ARM_ERRATA_742230
>
> Stefan Roese (7):
> arm: imx: Change iomux functions to void type
> imx: Move some header files from arch-mxs to imx-common
> imx: Move some i.MX common functions into the imx-common directory
> dma: Add i.MX6 support to drivers/dma/apbh_dma.c
> mtd: mxs_nand: Add support for i.MX6
> imx: Add titanium board support (i.MX6 based)
> arm: imx: Codingstyle enhancement of
> include/asm/arch-mx6/crm_regs.h
>
> Stefano Babic (1):
> Merge branch 'next'
>
> Stephen Warren (3):
> tegra: always build u-boot-nodtb-tegra.bin
> ARM: tegra: support SKU 1 of Tegra114
> ARM: tegra: support SKU 7 of Tegra20
>
> Suriyan Ramasami (1):
> ARM: Add Seagate GoFlex Home support
>
> Tom Rini (4):
> beagleboard: Update comment in get_board_rev()
> omap5_common: Add optargs variable for kernel command line args
> am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
> arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
>
> Tom Warren (2):
> Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver,
> not cardhu Tegra: Remove unused/non-existent spl linker script reference
>
> Wu, Josh (4):
> arm: at91: add at91sam9n12 register definition
> arm: at91: add at91sam9n12ek board support
> arm: at91: enable mci support for at91sam9g20ek.
> arm: at91: add at91sam9g20ek_mmc_config, which can save
> environment in mmc card
>
> ??ukasz Da??ek (2):
> pxa: Add weak attribute to reset_cpu() function
> h2200: Add board reset support
>
> .gitignore | 1 +
> MAINTAINERS | 18 +-
> Makefile | 26 +-
> README | 5 +
> arch/arm/config.mk | 3 +
> arch/arm/cpu/arm1136/mx35/Makefile | 1 -
> arch/arm/cpu/arm1136/mx35/iomux.c | 114 --
> arch/arm/cpu/arm1136/start.S | 81 --
> arch/arm/cpu/arm1176/start.S | 77 --
> arch/arm/cpu/arm720t/start.S | 81 +-
> arch/arm/cpu/arm920t/start.S | 77 --
> arch/arm/cpu/arm925t/start.S | 77 --
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 177 +++
> arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 8 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 117 --
> arch/arm/cpu/arm926ejs/mxs/Makefile | 10 +
> arch/arm/cpu/arm926ejs/mxs/clock.c | 93 ++
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 65 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 46 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 +-
> arch/arm/cpu/arm926ejs/start.S | 81 --
> arch/arm/cpu/arm946es/start.S | 77 --
> arch/arm/cpu/arm_intcm/start.S | 77 --
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 103 +-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 6 +-
> arch/arm/cpu/armv7/at91/Makefile | 52 +
> arch/arm/cpu/armv7/at91/clock.c | 125 ++
> arch/arm/cpu/armv7/at91/cpu.c | 90 ++
> arch/arm/cpu/armv7/at91/reset.c | 47 +
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 +++
> arch/arm/cpu/armv7/at91/timer.c | 139 +++
> arch/arm/cpu/armv7/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/clock.c | 14 +-
> arch/arm/cpu/armv7/mx5/iomux.c | 186 ---
> arch/arm/cpu/armv7/mx5/soc.c | 7 +
> arch/arm/cpu/armv7/mx6/clock.c | 52 +-
> arch/arm/cpu/armv7/mx6/soc.c | 11 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 31 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 11 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 61 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 +-
> arch/arm/cpu/armv7/omap-common/reset.c | 4 +
> arch/arm/cpu/armv7/omap4/emif.c | 4 +-
> arch/arm/cpu/armv7/omap4/hw_data.c | 2 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 3 +-
> arch/arm/cpu/armv7/omap5/emif.c | 4 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 5 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 22 +-
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +
> arch/arm/cpu/armv7/start.S | 78 --
> arch/arm/cpu/armv7/zynq/slcr.c | 61 +
> arch/arm/cpu/armv7/zynq/timer.c | 49 +-
> arch/arm/cpu/ixp/config.mk | 4 -
> arch/arm/cpu/ixp/start.S | 77 --
> arch/arm/cpu/pxa/pxa2xx.c | 2 +-
> arch/arm/cpu/pxa/start.S | 96 +-
> arch/arm/cpu/s3c44b0/start.S | 77 --
> arch/arm/cpu/sa1100/start.S | 77 --
> arch/arm/cpu/tegra-common/ap.c | 2 +
> arch/arm/cpu/tegra-common/clock.c | 10 +-
> arch/arm/imx-common/Makefile | 22 +-
> arch/arm/imx-common/iomux-v3.c | 18 +-
> arch/arm/imx-common/misc.c | 84 ++
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 17 +
> arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 +
> arch/arm/include/asm/arch-am33xx/omap.h | 25 -
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91_dbu.h | 4 +
> arch/arm/include/asm/arch-at91/at91_pmc.h | 23 +
> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +-
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 19 +-
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
> arch/arm/include/asm/arch-at91/clk.h | 1 +
> arch/arm/include/asm/arch-at91/hardware.h | 4 +-
> arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++
> arch/arm/include/asm/arch-davinci/hardware.h | 2 +
> arch/arm/include/asm/arch-davinci/nand_defs.h | 9 +
> arch/arm/include/asm/arch-mx25/imx-regs.h | 21 +-
> arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 -------
> arch/arm/include/asm/arch-mx25/iomux-mx25.h | 545 +++++++++
> arch/arm/include/asm/arch-mx27/imx-regs.h | 3 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 22 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 19 +-
> arch/arm/include/asm/arch-mx35/iomux-mx35.h | 1276
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx35/iomux.h | 295 -----
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 353 ------
> arch/arm/include/asm/arch-mx5/clock.h | 1 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 24 +-
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 180 ++-
> arch/arm/include/asm/arch-mx5/iomux-mx53.h | 1232
> +++++++++++++++++++ arch/arm/include/asm/arch-mx5/iomux.h
> | 91 -- arch/arm/include/asm/arch-mx5/mx5x_pins.h | 879
> -------------- arch/arm/include/asm/arch-mx5/spl.h |
> 19 + arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 183 +--
> arch/arm/include/asm/arch-mx6/imx-regs.h | 96 +-
> arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 35 +-
> arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 -
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +
> arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +
> arch/arm/include/asm/arch-mxs/clock.h | 1 +
> arch/arm/include/asm/arch-mxs/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mxs/iomux.h | 4 +
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-digctl.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-i2c.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-lcdif.h | 38 +-
> arch/arm/include/asm/arch-mxs/regs-lradc.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-ocotp.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-pinctrl.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-power-mx28.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-rtc.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-ssp.h | 2 +-
> arch/arm/include/asm/arch-mxs/regs-timrot.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 36 -
> arch/arm/include/asm/arch-omap4/sys_proto.h | 12 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 10 +
> arch/arm/include/asm/arch-omap5/cpu.h | 2 +
> arch/arm/include/asm/arch-omap5/i2c.h | 2 +-
> arch/arm/include/asm/arch-omap5/omap.h | 36 -
> arch/arm/include/asm/arch-omap5/sys_proto.h | 22 +-
> arch/arm/include/asm/arch-pxa/hardware.h | 11 -
> arch/arm/include/asm/arch-tegra/tegra.h | 2 +
> arch/arm/include/asm/arch-zynq/hardware.h | 36 +-
> arch/arm/include/asm/arch-zynq/sys_proto.h | 7 +
> arch/arm/include/asm/global_data.h | 8
> + .../arm/include/asm/{arch-mxs => imx-common}/dma.h | 12 +
> arch/arm/include/asm/imx-common/imximage.cfg | 30 +
> arch/arm/include/asm/imx-common/iomux-v3.h | 69
> +- .../asm/{arch-mxs => imx-common}/regs-apbh.h | 19
> +- .../asm/{arch-mxs => imx-common}/regs-bch.h | 12
> +- .../asm/{arch-mxs => imx-common}/regs-common.h |
> 0 .../asm/{arch-mxs => imx-common}/regs-gpmi.h | 2 +-
> arch/arm/include/asm/omap_boot.h | 50 +
> arch/arm/include/asm/omap_common.h | 20 +
> arch/arm/lib/Makefile | 1 +
> arch/arm/lib/relocate.S | 112 ++
> arch/powerpc/cpu/mpc512x/Makefile | 1 -
> arch/powerpc/cpu/mpc512x/cpu_init.c | 2 +-
> arch/powerpc/cpu/mpc512x/iim.c | 394 ------
> arch/powerpc/include/asm/immap_512x.h | 2 +
> board/CarMediaLab/flea3/flea3.c | 91 +-
> board/Seagate/goflexhome/Makefile | 51 +
> board/Seagate/goflexhome/goflexhome.c | 189 +++
> board/Seagate/goflexhome/kwbimage.cfg | 168 +++
> board/armltd/vexpress/Makefile | 2
> +- .../vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} | 35 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 22 +-
> board/atmel/at91sam9n12ek/Makefile | 52 +
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 ++++
> board/atmel/sama5d3xek/Makefile | 51 +
> board/atmel/sama5d3xek/sama5d3xek.c | 275 +++++
> board/boundary/nitrogen6x/clocks.cfg | 11 +
> board/boundary/nitrogen6x/nitrogen6x.c | 42 +-
> board/{ => compulab}/cm_t35/Makefile | 12 +-
> board/{ => compulab}/cm_t35/cm_t35.c | 26 +-
> board/{ => compulab}/cm_t35/display.c | 2 +-
> board/{ => compulab}/cm_t35/eeprom.c | 0 board/{ =>
> compulab}/cm_t35/eeprom.h | 0 board/{ =>
> compulab}/cm_t35/leds.c | 3 +-
> board/denx/m53evk/Makefile | 40 +
> board/denx/m53evk/imximage.cfg | 108 ++
> board/denx/m53evk/m53evk.c | 328 +++++
> board/esg/ima3-mx53/ima3-mx53.c | 228 ++--
> board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +
> board/freescale/mx23evk/spl_boot.c | 4 +-
> board/freescale/mx25pdk/mx25pdk.c | 132 +-
> board/freescale/mx31pdk/mx31pdk.c | 16 +-
> board/freescale/mx35pdk/mx35pdk.c | 175 ++-
> board/freescale/mx51evk/mx51evk.c | 348 ++----
> board/freescale/mx51evk/mx51evk_video.c | 22 +-
> board/freescale/mx53ard/mx53ard.c | 329 +++--
> board/freescale/mx53evk/mx53evk.c | 289 ++---
> board/freescale/mx53loco/mx53loco.c | 268 ++--
> board/freescale/mx53loco/mx53loco_video.c | 68 +-
> board/freescale/mx53smd/mx53smd.c | 152 +--
> board/freescale/mx6qarm2/mx6qarm2.c | 17 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 22 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 30 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c | 30 +-
> board/freescale/mx6slevk/Makefile | 28 +
> board/freescale/mx6slevk/imximage.cfg | 118 ++
> board/freescale/mx6slevk/mx6slevk.c | 102 ++
> board/freescale/titanium/Makefile | 36 +
> board/freescale/titanium/imximage.cfg | 178 +++
> board/freescale/titanium/titanium.c | 334 +++++
> board/genesi/mx51_efikamx/efikamx-usb.c | 122 +-
> board/genesi/mx51_efikamx/efikamx.c | 2 +-
> board/h2200/h2200.c | 9 +
> board/isee/igep0033/Makefile | 46 +
> board/isee/igep0033/board.c | 232 ++++
> board/isee/igep0033/board.h | 27 +
> board/isee/igep0033/mux.c | 89 ++
> board/karo/tx25/tx25.c | 123 +-
> board/nokia/rx51/rx51.c | 52 +-
> board/nvidia/beaver/Makefile | 38 +
> board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
> board/pandora/pandora.c | 3 +-
> board/syteco/zmx25/zmx25.c | 143 +--
> board/ti/beagle/beagle.c | 5 +-
> board/ti/dra7xx/evm.c | 2 +-
> board/ti/omap5_uevm/evm.c | 6 +-
> board/ti/panda/panda.c | 6 +
> board/ti/ti814x/evm.c | 75 ++
> board/ti/ti814x/evm.h | 1 +
> board/ti/ti814x/mux.c | 35 +
> board/ttcontrol/vision2/vision2.c | 585 ++++-----
> board/wandboard/wandboard.c | 113 +-
> board/woodburn/woodburn.c | 69 +-
> board/xilinx/zynq/board.c | 66 +-
> boards.cfg | 20 +-
> common/Makefile | 1 +
> common/cmd_fpga.c | 250 ++--
> common/cmd_fuse.c | 168 +++
> common/spl/spl.c | 10 +-
> doc/README.at91 | 84 +-
> doc/README.fsl_iim | 48 +
> doc/README.fuse | 67 +
> doc/README.imx25 | 10 +
> doc/README.imx27 | 10 +
> doc/README.imx5 | 6 +
> doc/README.imx6 | 10 +
> doc/README.imximage | 18 +
> doc/README.mxc_ocotp | 50 +
> doc/README.omap-reset-time | 20 +
> drivers/dma/apbh_dma.c | 5 +-
> drivers/fpga/Makefile | 1 +
> drivers/fpga/fpga.c | 225 ++--
> drivers/fpga/xilinx.c | 146 +++
> drivers/fpga/zynqpl.c | 355 ++++++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/zynq_i2c.c | 306 +++++
> drivers/misc/Makefile | 2 +
> drivers/misc/fsl_iim.c | 286 +++++
> drivers/misc/mxc_ocotp.c | 216 ++++
> drivers/misc/twl4030_led.c | 4 +-
> drivers/mmc/Makefile | 1 +
> drivers/mmc/gen_atmel_mci.c | 47 +-
> drivers/mmc/mxsmmc.c | 2 +-
> drivers/mmc/omap_hsmmc.c | 8 +-
> drivers/mmc/zynq_sdhci.c | 40 +
> drivers/mtd/nand/Makefile | 2 +
> drivers/mtd/nand/docg4.c | 1028
> ++++++++++++++++ drivers/mtd/nand/docg4_spl.c |
> 222 ++++ drivers/mtd/nand/mxc_nand_spl.c | 13 +-
> drivers/mtd/nand/mxs_nand.c | 15 +-
> drivers/net/cpsw.c | 6 +
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/et1011c.c | 110 ++
> drivers/net/phy/marvell.c | 11 +
> drivers/net/phy/phy.c | 3 +
> drivers/net/zynq_gem.c | 199 ++-
> drivers/power/Makefile | 2 +-
> drivers/power/{twl6035.c => palmas.c} | 34 +-
> drivers/power/twl4030.c | 16 +-
> drivers/power/twl6030.c | 75 +-
> drivers/spi/atmel_spi.c | 15 +-
> drivers/spi/atmel_spi.h | 2 +-
> drivers/spi/mxs_spi.c | 2 +-
> drivers/usb/gadget/pxa27x_udc.c | 4 +-
> drivers/usb/host/ehci-mx5.c | 73 --
> drivers/usb/host/ohci-at91.c | 14 +-
> drivers/usb/phy/twl4030.c | 48 +-
> drivers/video/Makefile | 1 +
> drivers/video/cfb_console.c | 4 +
> drivers/video/mxsfb.c | 189 +++
> drivers/video/pxa_lcd.c | 34 +-
> include/altera.h | 17 -
> include/atmel_mci.h | 2 +
> include/config_cmd_all.h | 1 +
> include/configs/M54455EVB.h | 2 +-
> include/configs/MERGERBOX.h | 2 +-
> include/configs/MVBC_P.h | 2 +-
> include/configs/MVBLM7.h | 2 +-
> include/configs/MVSMR.h | 2 +-
> include/configs/ac14xx.h | 5 +
> include/configs/am335x_evm.h | 14 +-
> include/configs/aria.h | 2 +-
> include/configs/at91sam9260ek.h | 52 +-
> include/configs/at91sam9n12ek.h | 232 ++++
> include/configs/cm_t35.h | 18 +-
> include/configs/da830evm.h | 4 +-
> include/configs/da850evm.h | 4 +-
> include/configs/enbw_cmc.h | 4 +-
> include/configs/goflexhome.h | 151 +++
> include/configs/igep0033.h | 288 +++++
> include/configs/ima3-mx53.h | 3 -
> include/configs/m28evk.h | 19 +
> include/configs/m53evk.h | 256 ++++
> include/configs/mecp5123.h | 2 +-
> include/configs/mpc5121ads.h | 2 +-
> include/configs/mx28evk.h | 1 +
> include/configs/mx51evk.h | 51 +-
> include/configs/mx53ard.h | 102 +-
> include/configs/mx53evk.h | 1 +
> include/configs/mx53smd.h | 1 +
> include/configs/mx6_common.h | 1 +
> include/configs/mx6qsabre_common.h | 14 +
> include/configs/mx6qsabrelite.h | 5 +
> include/configs/mx6slevk.h | 189 +++
> include/configs/nitrogen6x.h | 5 +
> include/configs/omap3_mvblx.h | 2 +-
> include/configs/omap4_common.h | 8 +-
> include/configs/omap4_panda.h | 2 +
> include/configs/omap5_common.h | 5 +
> include/configs/omap5_uevm.h | 3 +-
> include/configs/pcm051.h | 8 +-
> include/configs/pdm360ng.h | 7 +
> include/configs/sama5d3xek.h | 245 ++++
> include/configs/tegra-common-post.h | 2 +
> include/configs/tegra114-common.h | 2 -
> include/configs/tegra20-common.h | 2 -
> include/configs/tegra30-common.h | 2 -
> include/configs/ti814x_evm.h | 25 +
> include/configs/titanium.h | 277 +++++
> include/configs/tnetv107x_evm.h | 4 +-
> include/configs/vexpress_ca15_tc2.h | 36 +
> include/configs/vexpress_ca5x2.h | 34
> + .../configs/vexpress_ca9x4.h | 22
> +- .../configs/{ca9x4_ct_vxp.h => vexpress_common.h} | 157 ++-
> include/configs/wandboard.h | 24 +-
> include/configs/zynq.h | 39 +-
> include/fpga.h | 13 +-
> include/fuse.h | 44 +
> include/lattice.h | 3 -
> include/linux/bitrev.h | 23 +
> include/linux/mtd/docg4.h | 134 ++
> include/netdev.h | 2 +-
> include/{twl6035.h => palmas.h} | 28 +-
> include/phy.h | 1 +
> include/spl.h | 1 -
> include/twl4030.h | 4 +-
> include/twl6030.h | 16 +
> include/usb/ehci-fsl.h | 6 -
> include/xilinx.h | 25 +-
> include/zynqpl.h | 59 +
> lib/Makefile | 1 +
> lib/bitrev.c | 59 +
> spl/Makefile | 8 +
> tools/imximage.c | 17 +-
> tools/imximage.h | 9 +-
> tools/mxsboot.c | 8 +- 353 files
> changed, 16980 insertions(+), 7344 deletions(-) delete mode 100644
> arch/arm/cpu/arm1136/mx35/iomux.c create mode 100644
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c create mode 100644
> arch/arm/cpu/armv7/at91/Makefile create mode 100644
> arch/arm/cpu/armv7/at91/clock.c create mode 100644
> arch/arm/cpu/armv7/at91/cpu.c create mode 100644
> arch/arm/cpu/armv7/at91/reset.c create mode 100644
> arch/arm/cpu/armv7/at91/sama5d3_devices.c create mode 100644
> arch/arm/cpu/armv7/at91/timer.c delete mode 100644
> arch/arm/cpu/armv7/mx5/iomux.c create mode 100644
> arch/arm/imx-common/misc.c create mode 100644
> arch/arm/include/asm/arch-at91/sama5d3.h create mode 100644
> arch/arm/include/asm/arch-at91/sama5d3_smc.h delete mode 100644
> arch/arm/include/asm/arch-mx25/imx25-pinmux.h create mode 100644
> arch/arm/include/asm/arch-mx25/iomux-mx25.h create mode 100644
> arch/arm/include/asm/arch-mx35/iomux-mx35.h delete mode 100644
> arch/arm/include/asm/arch-mx35/iomux.h delete mode 100644
> arch/arm/include/asm/arch-mx35/mx35_pins.h create mode 100644
> arch/arm/include/asm/arch-mx5/iomux-mx53.h delete mode 100644
> arch/arm/include/asm/arch-mx5/iomux.h delete mode 100644
> arch/arm/include/asm/arch-mx5/mx5x_pins.h create mode 100644
> arch/arm/include/asm/arch-mx5/spl.h create mode 100644
> arch/arm/include/asm/arch-mx6/mx6sl_pins.h rename
> arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%) create mode
> 100644 arch/arm/include/asm/imx-common/imximage.cfg rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%) rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%) rename
> arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
> rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
> create mode 100644 arch/arm/include/asm/omap_boot.h create mode 100644
> arch/arm/lib/relocate.S delete mode 100644
> arch/powerpc/cpu/mpc512x/iim.c create mode 100644
> board/Seagate/goflexhome/Makefile create mode 100644
> board/Seagate/goflexhome/goflexhome.c create mode 100644
> board/Seagate/goflexhome/kwbimage.cfg rename
> board/armltd/vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} (89%)
> create mode 100644 board/atmel/at91sam9n12ek/Makefile create mode
> 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c create mode 100644
> board/atmel/sama5d3xek/Makefile create mode 100644
> board/atmel/sama5d3xek/sama5d3xek.c rename board/{ =>
> compulab}/cm_t35/Makefile (82%) rename board/{ =>
> compulab}/cm_t35/cm_t35.c (96%) rename board/{ =>
> compulab}/cm_t35/display.c (99%) rename board/{ =>
> compulab}/cm_t35/eeprom.c (100%) rename board/{ =>
> compulab}/cm_t35/eeprom.h (100%) rename board/{ =>
> compulab}/cm_t35/leds.c (95%) create mode 100644
> board/denx/m53evk/Makefile create mode 100644
> board/denx/m53evk/imximage.cfg create mode 100644
> board/denx/m53evk/m53evk.c create mode 100644
> board/freescale/mx6slevk/Makefile create mode 100644
> board/freescale/mx6slevk/imximage.cfg create mode 100644
> board/freescale/mx6slevk/mx6slevk.c create mode 100644
> board/freescale/titanium/Makefile create mode 100644
> board/freescale/titanium/imximage.cfg create mode 100644
> board/freescale/titanium/titanium.c create mode 100644
> board/isee/igep0033/Makefile create mode 100644
> board/isee/igep0033/board.c create mode 100644
> board/isee/igep0033/board.h create mode 100644
> board/isee/igep0033/mux.c create mode 100644
> board/nvidia/beaver/Makefile create mode 100644 common/cmd_fuse.c
> create mode 100644 doc/README.fsl_iim
> create mode 100644 doc/README.fuse
> create mode 100644 doc/README.imx25
> create mode 100644 doc/README.imx27
> create mode 100644 doc/README.imx6
> create mode 100644 doc/README.mxc_ocotp
> create mode 100644 doc/README.omap-reset-time
> create mode 100644 drivers/fpga/zynqpl.c
> create mode 100644 drivers/i2c/zynq_i2c.c
> create mode 100644 drivers/misc/fsl_iim.c
> create mode 100644 drivers/misc/mxc_ocotp.c
> create mode 100644 drivers/mmc/zynq_sdhci.c
> create mode 100644 drivers/mtd/nand/docg4.c
> create mode 100644 drivers/mtd/nand/docg4_spl.c
> create mode 100644 drivers/net/phy/et1011c.c
> rename drivers/power/{twl6035.c => palmas.c} (61%)
> create mode 100644 drivers/video/mxsfb.c
> create mode 100644 include/configs/at91sam9n12ek.h
> create mode 100644 include/configs/goflexhome.h
> create mode 100644 include/configs/igep0033.h
> create mode 100644 include/configs/m53evk.h
> create mode 100644 include/configs/mx6slevk.h
> create mode 100644 include/configs/sama5d3xek.h
> create mode 100644 include/configs/titanium.h
> create mode 100644 include/configs/vexpress_ca15_tc2.h
> create mode 100644 include/configs/vexpress_ca5x2.h
> rename arch/arm/include/asm/arch-mx25/sys_proto.h =>
> include/configs/vexpress_ca9x4.h (61%) rename
> include/configs/{ca9x4_ct_vxp.h => vexpress_common.h} (56%) create
> mode 100644 include/fuse.h create mode 100644 include/linux/bitrev.h
> create mode 100644 include/linux/mtd/docg4.h
> rename include/{twl6035.h => palmas.h} (68%)
> create mode 100644 include/zynqpl.h
> create mode 100644 lib/bitrev.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130531/2f141d22/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-05-30 19:29 Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-05-30 19:29 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
a71d45d706a5b51c348160163b6c159632273fed:
powerpc/mpc85xx: Clear L1 D-cache lock (2013-05-24 16:54:14 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 3da0e5750b24a9491058df6126c7be577a276c09:
arm: factorize relocate_code routine (2013-05-30 20:24:38 +0200)
----------------------------------------------------------------
Albert ARIBAUD (9):
Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Revert wrong removal of nand_init and nand_deselect
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
mx31pdk: copy SPL directly, not using relocate_code.
tx25: copy SPL directly, not using relocate_code.
arm: do not compile relocate_code() for SPL builds
arm: factorize relocate_code routine
Allen Martin (1):
Tegra: clk: always use find_best_divider() for periph clocks
Andre Przywara (2):
ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
ARM: vexpress: enable bootz and hush parser for all VExpress
boards
Andreas Bie?mann (1):
at91sam9260ek: move board id setup to config header
Axel Lin (2):
ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for
cpu_init_crit tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
Beno?t Th?baudeau (40):
imx: Homogenize and fix fuse register definitions
imx: Add useful fuse definitions
Add fuse API and commands
Add fsl_iim driver
mpc: iim: Switch to common fsl_iim
mx51evk: Enable support for iim
Add mxc_ocotp driver
mx6qsabrelite: Enable support for ocotp
nitrogen6x: Enable support for ocotp
imx: Document fuse assignments for MAC addresses
imx: iomux-v3: Fix common pad control definitions
imx: iomux-v3: cosmetic: Reorganize definitions
imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
imx: iomux-v3: Include PKE and PUE to pad control pull definitions
imx: iomux-v3: Add iomux-mx25.h
imx: mx25pdk: Convert to iomux-v3
imx: mx25pdk: Fix GPIO assignments
imx: tx25: Convert to iomux-v3
imx: zmx25: Convert to iomux-v3
imx: mx25: Remove legacy iomux support
imx: iomux-v3: Add iomux-mx35.h
imx: flea3: Convert to iomux-v3
imx: mx35pdk: Fix WDOG_RST iomux function
imx: mx35pdk: Convert to iomux-v3
imx: woodburn: Convert to iomux-v3
imx: mx35: Remove legacy iomux support
imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
imx: iomux-v3: Add missing definitions to iomux-mx51.h
imx: mx51evk: Convert to iomux-v3
imx: mx51_efikamx/sb: Convert to iomux-v3
imx: vision2: Convert to iomux-v3
imx: iomux-v3: Add iomux-mx53.h
imx: ima3-mx53: Convert to iomux-v3
imx: mx53ard: Convert to iomux-v3
imx: mx53evk: Convert to iomux-v3
imx: mx53loco: Convert to iomux-v3
imx: mx53smd: Convert to iomux-v3
imx: m53evk: Convert to iomux-v3
imx: mx5: Remove legacy iomux support
imx: mx35pdk: Fix MUX2_CTR GPIO
Bo Shen (9):
spi: atmel_spi: using ip version to check whether has wdrbt
mmc: atmel_mci: using IP version for different setting
mmc: atmel_mci: add mmc card support
ARM: at91: add Atmel sama5d3 SoC new pmc register
USB: ohci-at91: support sama5d3x devices
ARM: atmel: add sama5d3xek support
ARM: at91: fix and update README.at91 document
ARM: at91: add at91sam9x5 and sama5d3x information
ARM: at91: add NAND partition table and index
Dan Murphy (2):
ARM:Panda:Fix device tree loading for the panda-es
ARM: Panda: Add flag to allow runtime enviroment varibale mods
David Andrey (3):
arm: zynq: U-Boot udelay < 1000 FIX
net: gem: Pass phy address to init
net: gem: Preserve clk on emio interface
Enric Balletbo i Serra (2):
Add DDR3 support for IGEP COM AQUILA/CYGNUS.
ARM: Add support for IGEP COM AQUILA/CYGNUS
Eric Benard (3):
mx28evk: add trimffs to nand command
da850: provide davinci_enable_uart0
davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
Fabio Estevam (22):
iomux-v3: Place pad control definitions into common file
mx6: Add solo-lite variant support
mx6sl: Add initial support for mx6slevk board
imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
nitrogen6x: Setup CCM_CCOSR register
mx51evk: Update environment in order to allow booting a dt kernel
mx51evk: Do not force the rootfs type
mx5: Define a common get_board_rev()
mx5: Select CONFIG_REVISION_TAG
mx53ard: Move register masks into imx-regs.h
mx23: Put back RAM voltage level to its original value
mx23: Fix pad voltage selection bit
mx23evk: Fix DDR pin iomux settings
mx23_olinuxino: Fix DDR pin iomux settings
mxs: spl_mem_init: Fix comment about start bit
mxs: spl_mem_init: Remove erroneous DDR setting
mxs: spl_mem_init: Skip the initialization of some DRAM_CTL
registers mxs: spl_mem_init: Change EMI port priority
mx23: Operate DDR voltage supply@2.5V
mx23evk: Do not set voltage selection bit for SSP pads
mx23_olinuxino: Do not set voltage selection bit for SSP pads
mxs: Explain why some mx23 DDR registers are not configured
Igor Grinberg (3):
cm-t35: move cm-t35 to live in compulab directory
MAINTAINERS: fix the cm-t35 board name
cm-t35: update config file
Lokesh Vutla (2):
arm: omap: emif: Fix DDR3 init after warm reset
ARM: OMAP5: Fix warm reset with USB cable connected
Lubomir Popov (4):
OMAP5: I2C: Enable i2c5 clocks
OMAP5: I2C: Add I2C4 and I2C5 bases
OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Marek Vasut (13):
tools: arm: imx: Implement BOOT_OFFSET command for imximage
imx: Align the imximage header and payload to multiples of 4k
nand: Add SPL_NAND support to mxc_nand_spl
arm: imx: Pack u-boot.bin into uImage for SPL
arm: mx5: Add SPL support code to MX5
arm: mx5: Add NAND clock handling
arm: mx5: Add support for DENX M53EVK
arm: mx23: Fix VDDMEM misconfiguration
arm: mxs: Preprocess u-boot.bd so they contain full path
arm: mxs: Add LCDIF clock configuration function
arm: mxs: Add LCDIF registers for i.MX233
arm: mxs: Add MXS LCDIF driver
arm: mxs: video: Enable MXS LCDIF on M28EVK
Mark Jackson (1):
Remove duplicate / unused #defines on AM335x boards
Matt Porter (4):
am33xx: add pll and clock support for TI814x CPSW
cpsw: add support for TI814x slave_regs differences
phy: add support for ET1011C phys
ti814x_evm: enable CPSW support
Michal Simek (20):
arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC
addresses zynq: Move scutimer baseaddr to hardware.h
net: phy: Define Marvell 88e1518 phy
net: gem: Remove WRAP bit from TX buffer description
net: gem: Simplify return path in zynq_gem_recv
net: gem: Do not initialize BDs again
net: gem: Fix gem driver on 1Gbps LAN
zynq: Move macros to hardware.h
net: gem: Add support for phy autodetection
mmc: Add support for Xilinx Zynq sdhci controller
i2c: zynq: Add support for Xilinx Zynq
fpga: Clean coding style
fpga: Fix debug message compilation error
cmd: fpga: Clean coding style
cmd: fpga: Move fpga_loadbitstream to fpga.c
fpga: Change the first parameter in fpga_loadbitstream
cmd: fpga: Do not include net.h
fpga: zynq: Add support for loading bitstream
fpga: Check device name against bitstream name
fpga: Remove all CONFIG_SYS_* fpga related options
Mike Dunn (5):
lib: import bitrev library from the linux kernel
pxa_lcd: add the ACX544AKN lcd device
pxa_lcd: make lcd_enable() a weak pointer
pxa27x_udc: remove call to unimplemented set_GPIO_mode()
mtd: nand: add driver for diskonchip g4 nand flash
Nishanth Menon (10):
twl4030: make twl4030_i2c_write_u8 prototype consistent
twl4030: make twl4030_i2c_read_u8 prototype consistent
twl6030: twl6030_i2c_[read|write]_u8 prototype consistent
twl6030: move twl6030 register access functions to common header
file twl6030: add header guard
twl6035: rename to palmas
palmas: rename init_settings to an generic palmas init
palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic
function palmas: use palmas_i2c_[read|write]_u8
palmas: add header guard
Otavio Salvador (9):
mx6qsabre{sd, auto}: Add update_sd_firmware support
mx6qsabresd: Return status when initializing MMC
wandboard: Use env storage info for mmcdev/mmcpart
wandboard: Add update_sd_firmware support
wandboard: Add card detection for SOM MicroSD card
wandboard: Add support for Carrier Board MicroSD card
wandboard: Add boot selection support
mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
mx53ard: Rework default environment to support FDT, MMC and
netboot
Philip Paeps (2):
mx35 iomux: correct offsets of IOMUX registers
mx35 iomux: correct input select register index
Ryan Harkin (2):
ARM: vexpress: refactoring of Versatile Express CA9x4 support
ARM: vexpress: create A5 specific board config
SRICHARAN R (5):
ARM: OMAP: Make omap_boot_parameters common across socs
ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
ARM: OMAP: Correct save_boot_params and replace with 'C' function
ARM: OMAP: Cleanup boot parameters usage
ARM: OMAP: Add arch_cpu_init function
Shawn Guo (1):
ARM: mx6: define CONFIG_ARM_ERRATA_742230
Stefan Roese (7):
arm: imx: Change iomux functions to void type
imx: Move some header files from arch-mxs to imx-common
imx: Move some i.MX common functions into the imx-common directory
dma: Add i.MX6 support to drivers/dma/apbh_dma.c
mtd: mxs_nand: Add support for i.MX6
imx: Add titanium board support (i.MX6 based)
arm: imx: Codingstyle enhancement of
include/asm/arch-mx6/crm_regs.h
Stefano Babic (1):
Merge branch 'next'
Stephen Warren (3):
tegra: always build u-boot-nodtb-tegra.bin
ARM: tegra: support SKU 1 of Tegra114
ARM: tegra: support SKU 7 of Tegra20
Suriyan Ramasami (1):
ARM: Add Seagate GoFlex Home support
Tom Rini (4):
beagleboard: Update comment in get_board_rev()
omap5_common: Add optargs variable for kernel command line args
am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
Tom Warren (2):
Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver,
not cardhu Tegra: Remove unused/non-existent spl linker script reference
Wu, Josh (4):
arm: at91: add at91sam9n12 register definition
arm: at91: add at91sam9n12ek board support
arm: at91: enable mci support for at91sam9g20ek.
arm: at91: add at91sam9g20ek_mmc_config, which can save
environment in mmc card
?ukasz Da?ek (2):
pxa: Add weak attribute to reset_cpu() function
h2200: Add board reset support
.gitignore | 1 +
MAINTAINERS | 18 +-
Makefile | 26 +-
README | 5 +
arch/arm/config.mk | 3 +
arch/arm/cpu/arm1136/mx35/Makefile | 1 -
arch/arm/cpu/arm1136/mx35/iomux.c | 114 --
arch/arm/cpu/arm1136/start.S | 81 --
arch/arm/cpu/arm1176/start.S | 77 --
arch/arm/cpu/arm720t/start.S | 81 +-
arch/arm/cpu/arm920t/start.S | 77 --
arch/arm/cpu/arm925t/start.S | 77 --
arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c | 177 +++
arch/arm/cpu/arm926ejs/at91/clock.c | 4 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 8 +
arch/arm/cpu/arm926ejs/mx25/generic.c | 117 --
arch/arm/cpu/arm926ejs/mxs/Makefile | 10 +
arch/arm/cpu/arm926ejs/mxs/clock.c | 93 ++
arch/arm/cpu/arm926ejs/mxs/mxs.c | 65 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 46 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 +-
arch/arm/cpu/arm926ejs/start.S | 81 --
arch/arm/cpu/arm946es/start.S | 77 --
arch/arm/cpu/arm_intcm/start.S | 77 --
arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 103 +-
arch/arm/cpu/armv7/am33xx/sys_info.c | 6 +-
arch/arm/cpu/armv7/at91/Makefile | 52 +
arch/arm/cpu/armv7/at91/clock.c | 125 ++
arch/arm/cpu/armv7/at91/cpu.c | 90 ++
arch/arm/cpu/armv7/at91/reset.c | 47 +
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 196 +++
arch/arm/cpu/armv7/at91/timer.c | 139 +++
arch/arm/cpu/armv7/lowlevel_init.S | 8 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/clock.c | 14 +-
arch/arm/cpu/armv7/mx5/iomux.c | 186 ---
arch/arm/cpu/armv7/mx5/soc.c | 7 +
arch/arm/cpu/armv7/mx6/clock.c | 52 +-
arch/arm/cpu/armv7/mx6/soc.c | 11 +-
arch/arm/cpu/armv7/omap-common/boot-common.c | 31 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 1 +
arch/arm/cpu/armv7/omap-common/emif-common.c | 11 +-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 61 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 +-
arch/arm/cpu/armv7/omap-common/reset.c | 4 +
arch/arm/cpu/armv7/omap4/emif.c | 4 +-
arch/arm/cpu/armv7/omap4/hw_data.c | 2 +-
arch/arm/cpu/armv7/omap4/hwinit.c | 3 +-
arch/arm/cpu/armv7/omap5/emif.c | 4 +-
arch/arm/cpu/armv7/omap5/hw_data.c | 5 +-
arch/arm/cpu/armv7/omap5/hwinit.c | 22 +-
arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 +
arch/arm/cpu/armv7/start.S | 78 --
arch/arm/cpu/armv7/zynq/slcr.c | 61 +
arch/arm/cpu/armv7/zynq/timer.c | 49 +-
arch/arm/cpu/ixp/config.mk | 4 -
arch/arm/cpu/ixp/start.S | 77 --
arch/arm/cpu/pxa/pxa2xx.c | 2 +-
arch/arm/cpu/pxa/start.S | 96 +-
arch/arm/cpu/s3c44b0/start.S | 77 --
arch/arm/cpu/sa1100/start.S | 77 --
arch/arm/cpu/tegra-common/ap.c | 2 +
arch/arm/cpu/tegra-common/clock.c | 10 +-
arch/arm/imx-common/Makefile | 22 +-
arch/arm/imx-common/iomux-v3.c | 18 +-
arch/arm/imx-common/misc.c | 84 ++
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 17 +
arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 +
arch/arm/include/asm/arch-am33xx/omap.h | 25 -
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
arch/arm/include/asm/arch-at91/at91_dbu.h | 4 +
arch/arm/include/asm/arch-at91/at91_pmc.h | 23 +
arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +-
arch/arm/include/asm/arch-at91/at91sam9x5.h | 19 +-
arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 17 +-
arch/arm/include/asm/arch-at91/clk.h | 1 +
arch/arm/include/asm/arch-at91/hardware.h | 4 +-
arch/arm/include/asm/arch-at91/sama5d3.h | 212 ++++
arch/arm/include/asm/arch-at91/sama5d3_smc.h | 79 ++
arch/arm/include/asm/arch-davinci/hardware.h | 2 +
arch/arm/include/asm/arch-davinci/nand_defs.h | 9 +
arch/arm/include/asm/arch-mx25/imx-regs.h | 21 +-
arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 -------
arch/arm/include/asm/arch-mx25/iomux-mx25.h | 545 +++++++++
arch/arm/include/asm/arch-mx27/imx-regs.h | 3 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 22 +-
arch/arm/include/asm/arch-mx35/imx-regs.h | 19 +-
arch/arm/include/asm/arch-mx35/iomux-mx35.h | 1276
++++++++++++++++++++
arch/arm/include/asm/arch-mx35/iomux.h | 295 -----
arch/arm/include/asm/arch-mx35/mx35_pins.h | 353 ------
arch/arm/include/asm/arch-mx5/clock.h | 1 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 24 +-
arch/arm/include/asm/arch-mx5/iomux-mx51.h | 180 ++-
arch/arm/include/asm/arch-mx5/iomux-mx53.h | 1232
+++++++++++++++++++ arch/arm/include/asm/arch-mx5/iomux.h
| 91 -- arch/arm/include/asm/arch-mx5/mx5x_pins.h | 879
-------------- arch/arm/include/asm/arch-mx5/spl.h |
19 + arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 183 +--
arch/arm/include/asm/arch-mx6/imx-regs.h | 96 +-
arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 35 +-
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 -
arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +
arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +
arch/arm/include/asm/arch-mxs/clock.h | 1 +
arch/arm/include/asm/arch-mxs/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mxs/iomux.h | 4 +
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-digctl.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-i2c.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-lcdif.h | 38 +-
arch/arm/include/asm/arch-mxs/regs-lradc.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-ocotp.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-pinctrl.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-power-mx28.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-rtc.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-ssp.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-timrot.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 36 -
arch/arm/include/asm/arch-omap4/sys_proto.h | 12 +-
arch/arm/include/asm/arch-omap5/clocks.h | 10 +
arch/arm/include/asm/arch-omap5/cpu.h | 2 +
arch/arm/include/asm/arch-omap5/i2c.h | 2 +-
arch/arm/include/asm/arch-omap5/omap.h | 36 -
arch/arm/include/asm/arch-omap5/sys_proto.h | 22 +-
arch/arm/include/asm/arch-pxa/hardware.h | 11 -
arch/arm/include/asm/arch-tegra/tegra.h | 2 +
arch/arm/include/asm/arch-zynq/hardware.h | 36 +-
arch/arm/include/asm/arch-zynq/sys_proto.h | 7 +
arch/arm/include/asm/global_data.h | 8
+ .../arm/include/asm/{arch-mxs => imx-common}/dma.h | 12 +
arch/arm/include/asm/imx-common/imximage.cfg | 30 +
arch/arm/include/asm/imx-common/iomux-v3.h | 69
+- .../asm/{arch-mxs => imx-common}/regs-apbh.h | 19
+- .../asm/{arch-mxs => imx-common}/regs-bch.h | 12
+- .../asm/{arch-mxs => imx-common}/regs-common.h |
0 .../asm/{arch-mxs => imx-common}/regs-gpmi.h | 2 +-
arch/arm/include/asm/omap_boot.h | 50 +
arch/arm/include/asm/omap_common.h | 20 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/relocate.S | 112 ++
arch/powerpc/cpu/mpc512x/Makefile | 1 -
arch/powerpc/cpu/mpc512x/cpu_init.c | 2 +-
arch/powerpc/cpu/mpc512x/iim.c | 394 ------
arch/powerpc/include/asm/immap_512x.h | 2 +
board/CarMediaLab/flea3/flea3.c | 91 +-
board/Seagate/goflexhome/Makefile | 51 +
board/Seagate/goflexhome/goflexhome.c | 189 +++
board/Seagate/goflexhome/kwbimage.cfg | 168 +++
board/armltd/vexpress/Makefile | 2
+- .../vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} | 35 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 22 +-
board/atmel/at91sam9n12ek/Makefile | 52 +
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 228 ++++
board/atmel/sama5d3xek/Makefile | 51 +
board/atmel/sama5d3xek/sama5d3xek.c | 275 +++++
board/boundary/nitrogen6x/clocks.cfg | 11 +
board/boundary/nitrogen6x/nitrogen6x.c | 42 +-
board/{ => compulab}/cm_t35/Makefile | 12 +-
board/{ => compulab}/cm_t35/cm_t35.c | 26 +-
board/{ => compulab}/cm_t35/display.c | 2 +-
board/{ => compulab}/cm_t35/eeprom.c | 0 board/{ =>
compulab}/cm_t35/eeprom.h | 0 board/{ =>
compulab}/cm_t35/leds.c | 3 +-
board/denx/m53evk/Makefile | 40 +
board/denx/m53evk/imximage.cfg | 108 ++
board/denx/m53evk/m53evk.c | 328 +++++
board/esg/ima3-mx53/ima3-mx53.c | 228 ++--
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +
board/freescale/mx23evk/spl_boot.c | 4 +-
board/freescale/mx25pdk/mx25pdk.c | 132 +-
board/freescale/mx31pdk/mx31pdk.c | 16 +-
board/freescale/mx35pdk/mx35pdk.c | 175 ++-
board/freescale/mx51evk/mx51evk.c | 348 ++----
board/freescale/mx51evk/mx51evk_video.c | 22 +-
board/freescale/mx53ard/mx53ard.c | 329 +++--
board/freescale/mx53evk/mx53evk.c | 289 ++---
board/freescale/mx53loco/mx53loco.c | 268 ++--
board/freescale/mx53loco/mx53loco_video.c | 68 +-
board/freescale/mx53smd/mx53smd.c | 152 +--
board/freescale/mx6qarm2/mx6qarm2.c | 17 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 22 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 30 +-
board/freescale/mx6qsabresd/mx6qsabresd.c | 30 +-
board/freescale/mx6slevk/Makefile | 28 +
board/freescale/mx6slevk/imximage.cfg | 118 ++
board/freescale/mx6slevk/mx6slevk.c | 102 ++
board/freescale/titanium/Makefile | 36 +
board/freescale/titanium/imximage.cfg | 178 +++
board/freescale/titanium/titanium.c | 334 +++++
board/genesi/mx51_efikamx/efikamx-usb.c | 122 +-
board/genesi/mx51_efikamx/efikamx.c | 2 +-
board/h2200/h2200.c | 9 +
board/isee/igep0033/Makefile | 46 +
board/isee/igep0033/board.c | 232 ++++
board/isee/igep0033/board.h | 27 +
board/isee/igep0033/mux.c | 89 ++
board/karo/tx25/tx25.c | 123 +-
board/nokia/rx51/rx51.c | 52 +-
board/nvidia/beaver/Makefile | 38 +
board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
board/pandora/pandora.c | 3 +-
board/syteco/zmx25/zmx25.c | 143 +--
board/ti/beagle/beagle.c | 5 +-
board/ti/dra7xx/evm.c | 2 +-
board/ti/omap5_uevm/evm.c | 6 +-
board/ti/panda/panda.c | 6 +
board/ti/ti814x/evm.c | 75 ++
board/ti/ti814x/evm.h | 1 +
board/ti/ti814x/mux.c | 35 +
board/ttcontrol/vision2/vision2.c | 585 ++++-----
board/wandboard/wandboard.c | 113 +-
board/woodburn/woodburn.c | 69 +-
board/xilinx/zynq/board.c | 66 +-
boards.cfg | 20 +-
common/Makefile | 1 +
common/cmd_fpga.c | 250 ++--
common/cmd_fuse.c | 168 +++
common/spl/spl.c | 10 +-
doc/README.at91 | 84 +-
doc/README.fsl_iim | 48 +
doc/README.fuse | 67 +
doc/README.imx25 | 10 +
doc/README.imx27 | 10 +
doc/README.imx5 | 6 +
doc/README.imx6 | 10 +
doc/README.imximage | 18 +
doc/README.mxc_ocotp | 50 +
doc/README.omap-reset-time | 20 +
drivers/dma/apbh_dma.c | 5 +-
drivers/fpga/Makefile | 1 +
drivers/fpga/fpga.c | 225 ++--
drivers/fpga/xilinx.c | 146 +++
drivers/fpga/zynqpl.c | 355 ++++++
drivers/i2c/Makefile | 1 +
drivers/i2c/zynq_i2c.c | 306 +++++
drivers/misc/Makefile | 2 +
drivers/misc/fsl_iim.c | 286 +++++
drivers/misc/mxc_ocotp.c | 216 ++++
drivers/misc/twl4030_led.c | 4 +-
drivers/mmc/Makefile | 1 +
drivers/mmc/gen_atmel_mci.c | 47 +-
drivers/mmc/mxsmmc.c | 2 +-
drivers/mmc/omap_hsmmc.c | 8 +-
drivers/mmc/zynq_sdhci.c | 40 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/docg4.c | 1028
++++++++++++++++ drivers/mtd/nand/docg4_spl.c |
222 ++++ drivers/mtd/nand/mxc_nand_spl.c | 13 +-
drivers/mtd/nand/mxs_nand.c | 15 +-
drivers/net/cpsw.c | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/et1011c.c | 110 ++
drivers/net/phy/marvell.c | 11 +
drivers/net/phy/phy.c | 3 +
drivers/net/zynq_gem.c | 199 ++-
drivers/power/Makefile | 2 +-
drivers/power/{twl6035.c => palmas.c} | 34 +-
drivers/power/twl4030.c | 16 +-
drivers/power/twl6030.c | 75 +-
drivers/spi/atmel_spi.c | 15 +-
drivers/spi/atmel_spi.h | 2 +-
drivers/spi/mxs_spi.c | 2 +-
drivers/usb/gadget/pxa27x_udc.c | 4 +-
drivers/usb/host/ehci-mx5.c | 73 --
drivers/usb/host/ohci-at91.c | 14 +-
drivers/usb/phy/twl4030.c | 48 +-
drivers/video/Makefile | 1 +
drivers/video/cfb_console.c | 4 +
drivers/video/mxsfb.c | 189 +++
drivers/video/pxa_lcd.c | 34 +-
include/altera.h | 17 -
include/atmel_mci.h | 2 +
include/config_cmd_all.h | 1 +
include/configs/M54455EVB.h | 2 +-
include/configs/MERGERBOX.h | 2 +-
include/configs/MVBC_P.h | 2 +-
include/configs/MVBLM7.h | 2 +-
include/configs/MVSMR.h | 2 +-
include/configs/ac14xx.h | 5 +
include/configs/am335x_evm.h | 14 +-
include/configs/aria.h | 2 +-
include/configs/at91sam9260ek.h | 52 +-
include/configs/at91sam9n12ek.h | 232 ++++
include/configs/cm_t35.h | 18 +-
include/configs/da830evm.h | 4 +-
include/configs/da850evm.h | 4 +-
include/configs/enbw_cmc.h | 4 +-
include/configs/goflexhome.h | 151 +++
include/configs/igep0033.h | 288 +++++
include/configs/ima3-mx53.h | 3 -
include/configs/m28evk.h | 19 +
include/configs/m53evk.h | 256 ++++
include/configs/mecp5123.h | 2 +-
include/configs/mpc5121ads.h | 2 +-
include/configs/mx28evk.h | 1 +
include/configs/mx51evk.h | 51 +-
include/configs/mx53ard.h | 102 +-
include/configs/mx53evk.h | 1 +
include/configs/mx53smd.h | 1 +
include/configs/mx6_common.h | 1 +
include/configs/mx6qsabre_common.h | 14 +
include/configs/mx6qsabrelite.h | 5 +
include/configs/mx6slevk.h | 189 +++
include/configs/nitrogen6x.h | 5 +
include/configs/omap3_mvblx.h | 2 +-
include/configs/omap4_common.h | 8 +-
include/configs/omap4_panda.h | 2 +
include/configs/omap5_common.h | 5 +
include/configs/omap5_uevm.h | 3 +-
include/configs/pcm051.h | 8 +-
include/configs/pdm360ng.h | 7 +
include/configs/sama5d3xek.h | 245 ++++
include/configs/tegra-common-post.h | 2 +
include/configs/tegra114-common.h | 2 -
include/configs/tegra20-common.h | 2 -
include/configs/tegra30-common.h | 2 -
include/configs/ti814x_evm.h | 25 +
include/configs/titanium.h | 277 +++++
include/configs/tnetv107x_evm.h | 4 +-
include/configs/vexpress_ca15_tc2.h | 36 +
include/configs/vexpress_ca5x2.h | 34
+ .../configs/vexpress_ca9x4.h | 22
+- .../configs/{ca9x4_ct_vxp.h => vexpress_common.h} | 157 ++-
include/configs/wandboard.h | 24 +-
include/configs/zynq.h | 39 +-
include/fpga.h | 13 +-
include/fuse.h | 44 +
include/lattice.h | 3 -
include/linux/bitrev.h | 23 +
include/linux/mtd/docg4.h | 134 ++
include/netdev.h | 2 +-
include/{twl6035.h => palmas.h} | 28 +-
include/phy.h | 1 +
include/spl.h | 1 -
include/twl4030.h | 4 +-
include/twl6030.h | 16 +
include/usb/ehci-fsl.h | 6 -
include/xilinx.h | 25 +-
include/zynqpl.h | 59 +
lib/Makefile | 1 +
lib/bitrev.c | 59 +
spl/Makefile | 8 +
tools/imximage.c | 17 +-
tools/imximage.h | 9 +-
tools/mxsboot.c | 8 +- 353 files
changed, 16980 insertions(+), 7344 deletions(-) delete mode 100644
arch/arm/cpu/arm1136/mx35/iomux.c create mode 100644
arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c create mode 100644
arch/arm/cpu/armv7/at91/Makefile create mode 100644
arch/arm/cpu/armv7/at91/clock.c create mode 100644
arch/arm/cpu/armv7/at91/cpu.c create mode 100644
arch/arm/cpu/armv7/at91/reset.c create mode 100644
arch/arm/cpu/armv7/at91/sama5d3_devices.c create mode 100644
arch/arm/cpu/armv7/at91/timer.c delete mode 100644
arch/arm/cpu/armv7/mx5/iomux.c create mode 100644
arch/arm/imx-common/misc.c create mode 100644
arch/arm/include/asm/arch-at91/sama5d3.h create mode 100644
arch/arm/include/asm/arch-at91/sama5d3_smc.h delete mode 100644
arch/arm/include/asm/arch-mx25/imx25-pinmux.h create mode 100644
arch/arm/include/asm/arch-mx25/iomux-mx25.h create mode 100644
arch/arm/include/asm/arch-mx35/iomux-mx35.h delete mode 100644
arch/arm/include/asm/arch-mx35/iomux.h delete mode 100644
arch/arm/include/asm/arch-mx35/mx35_pins.h create mode 100644
arch/arm/include/asm/arch-mx5/iomux-mx53.h delete mode 100644
arch/arm/include/asm/arch-mx5/iomux.h delete mode 100644
arch/arm/include/asm/arch-mx5/mx5x_pins.h create mode 100644
arch/arm/include/asm/arch-mx5/spl.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6sl_pins.h rename
arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%) create mode
100644 arch/arm/include/asm/imx-common/imximage.cfg rename
arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%) rename
arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%) rename
arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
create mode 100644 arch/arm/include/asm/omap_boot.h create mode 100644
arch/arm/lib/relocate.S delete mode 100644
arch/powerpc/cpu/mpc512x/iim.c create mode 100644
board/Seagate/goflexhome/Makefile create mode 100644
board/Seagate/goflexhome/goflexhome.c create mode 100644
board/Seagate/goflexhome/kwbimage.cfg rename
board/armltd/vexpress/{ca9x4_ct_vxp.c => vexpress_common.c} (89%)
create mode 100644 board/atmel/at91sam9n12ek/Makefile create mode
100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c create mode 100644
board/atmel/sama5d3xek/Makefile create mode 100644
board/atmel/sama5d3xek/sama5d3xek.c rename board/{ =>
compulab}/cm_t35/Makefile (82%) rename board/{ =>
compulab}/cm_t35/cm_t35.c (96%) rename board/{ =>
compulab}/cm_t35/display.c (99%) rename board/{ =>
compulab}/cm_t35/eeprom.c (100%) rename board/{ =>
compulab}/cm_t35/eeprom.h (100%) rename board/{ =>
compulab}/cm_t35/leds.c (95%) create mode 100644
board/denx/m53evk/Makefile create mode 100644
board/denx/m53evk/imximage.cfg create mode 100644
board/denx/m53evk/m53evk.c create mode 100644
board/freescale/mx6slevk/Makefile create mode 100644
board/freescale/mx6slevk/imximage.cfg create mode 100644
board/freescale/mx6slevk/mx6slevk.c create mode 100644
board/freescale/titanium/Makefile create mode 100644
board/freescale/titanium/imximage.cfg create mode 100644
board/freescale/titanium/titanium.c create mode 100644
board/isee/igep0033/Makefile create mode 100644
board/isee/igep0033/board.c create mode 100644
board/isee/igep0033/board.h create mode 100644
board/isee/igep0033/mux.c create mode 100644
board/nvidia/beaver/Makefile create mode 100644 common/cmd_fuse.c
create mode 100644 doc/README.fsl_iim
create mode 100644 doc/README.fuse
create mode 100644 doc/README.imx25
create mode 100644 doc/README.imx27
create mode 100644 doc/README.imx6
create mode 100644 doc/README.mxc_ocotp
create mode 100644 doc/README.omap-reset-time
create mode 100644 drivers/fpga/zynqpl.c
create mode 100644 drivers/i2c/zynq_i2c.c
create mode 100644 drivers/misc/fsl_iim.c
create mode 100644 drivers/misc/mxc_ocotp.c
create mode 100644 drivers/mmc/zynq_sdhci.c
create mode 100644 drivers/mtd/nand/docg4.c
create mode 100644 drivers/mtd/nand/docg4_spl.c
create mode 100644 drivers/net/phy/et1011c.c
rename drivers/power/{twl6035.c => palmas.c} (61%)
create mode 100644 drivers/video/mxsfb.c
create mode 100644 include/configs/at91sam9n12ek.h
create mode 100644 include/configs/goflexhome.h
create mode 100644 include/configs/igep0033.h
create mode 100644 include/configs/m53evk.h
create mode 100644 include/configs/mx6slevk.h
create mode 100644 include/configs/sama5d3xek.h
create mode 100644 include/configs/titanium.h
create mode 100644 include/configs/vexpress_ca15_tc2.h
create mode 100644 include/configs/vexpress_ca5x2.h
rename arch/arm/include/asm/arch-mx25/sys_proto.h =>
include/configs/vexpress_ca9x4.h (61%) rename
include/configs/{ca9x4_ct_vxp.h => vexpress_common.h} (56%) create
mode 100644 include/fuse.h create mode 100644 include/linux/bitrev.h
create mode 100644 include/linux/mtd/docg4.h
rename include/{twl6035.h => palmas.h} (68%)
create mode 100644 include/zynqpl.h
create mode 100644 lib/bitrev.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-04-17 16:37 Albert ARIBAUD
@ 2013-04-18 20:17 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-04-18 20:17 UTC (permalink / raw)
To: u-boot
On Wed, Apr 17, 2013 at 06:37:06PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> c4a4e2e20ca226948b62ed116df98f7a3932f2ac:
>
> ARMv7: start.S: stay in HYP mode if u-boot is entered in it
> (2013-04-15 18:30:59 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to f2e8a87305a55652488af140adcf65b1e688f287:
>
> exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
>
> Note: there is a trivial merge conflict for
> include/configs/exynos5250-dt.h:
>
> ++<<<<<<< HEAD
> +/* USB boot mode */
> +#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
> +#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
> +#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
> ++=======
> + /* TPM */
> + #define CONFIG_TPM
> + #define CONFIG_CMD_TPM
> + #define CONFIG_INFINEON_TPM_I2C
> + #define CONFIG_INFINEON_TPM_I2C_BUS 3
> + #define CONFIG_INFINEON_TPM_I2C_ADDR 0x20
> ++>>>>>>> u-boot/master
>
> ----------------------------------------------------------------
> Simon Glass (2):
> exynos: Correct use of 64-bit division
> exynos: fdt: Add TMU node for snow
>
> Stephen Warren (1):
> ARM: tegra: support T33 SKU of Tegra30
>
> Thierry Reding (4):
> Tegra: All Tamonten-derived boards use onboard NAND
> Tegra: Medcom-Wide: Enable NAND and boot script support
> Tegra: Plutux: Enable NAND and boot script support
> Tegra: TEC: Enable boot script support
>
> Tom Warren (7):
> Tegra: enable verify support for the crc32 command
> Tegra: Restore cp15 VBAR _start vector write for ARMv7
> Tegra: Configure L2 cache control reg properly.
> Tegra114: Initialize System Counter (TSC) with osc frequency
> Tegra: Fix MSELECT clock divisors for T30/T114.
> Tegra: Split tegra_get_chip_type() into soc & sku funcs
> Tegra: T30: Beaver board support.
>
> Vivek Gautam (1):
> Exynos5: Add support for USB download boot mode
>
> MAINTAINERS | 1 +
> arch/arm/cpu/arm720t/tegra-common/cpu.c | 48 ++++++++-------
> arch/arm/cpu/arm720t/tegra-common/cpu.h | 4 +-
> arch/arm/cpu/arm720t/tegra114/cpu.c | 10 ++--
> arch/arm/cpu/arm720t/tegra30/cpu.c | 4 +-
> arch/arm/cpu/armv7/s5p-common/timer.c | 7 ++-
> arch/arm/cpu/armv7/start.S | 2 -
> arch/arm/cpu/tegra-common/Makefile | 2 +-
> arch/arm/cpu/tegra-common/ap.c | 53 +++++++++++------
> arch/arm/cpu/tegra-common/cache.c | 48 +++++++++++++++
> arch/arm/cpu/tegra-common/clock.c | 3 +
> arch/arm/cpu/tegra114-common/clock.c | 22 +++++++
> arch/arm/cpu/tegra20-common/clock.c | 4 ++
> arch/arm/cpu/tegra20-common/pmu.c | 4 +-
> arch/arm/cpu/tegra30-common/clock.c | 4 ++
> arch/arm/include/asm/arch-tegra/ap.h | 21 ++++++-
> arch/arm/include/asm/arch-tegra/clock.h | 3 +
> arch/arm/include/asm/arch-tegra/tegra.h | 1 +
> arch/arm/include/asm/arch-tegra114/sysctr.h | 35 +++++++++++
> arch/arm/include/asm/arch-tegra114/tegra.h | 1 +
> board/avionic-design/dts/tegra20-tamonten.dtsi | 11 ++++
> board/avionic-design/dts/tegra20-tec.dts | 11 ----
> board/nvidia/common/emc.c | 2 +-
> board/nvidia/dts/tegra30-beaver.dts | 71
> ++++++++++++++++++++++ board/samsung/dts/exynos5250-snow.dts
> | 14 +++++ board/samsung/smdk5250/spl_boot.c | 40
> ++++++++++++- boards.cfg | 1 +
> include/configs/beaver.h | 76
> ++++++++++++++++++++++++
> include/configs/exynos5250-dt.h | 5 ++
> include/configs/medcom-wide.h | 21 ++++---
> include/configs/plutux.h | 18 +++---
> include/configs/tec.h | 10 +---
> include/configs/tegra-common.h | 2 + 33 files
> changed, 467 insertions(+), 92 deletions(-) create mode 100644
> arch/arm/cpu/tegra-common/cache.c create mode 100644
> arch/arm/include/asm/arch-tegra114/sysctr.h create mode 100644
> board/nvidia/dts/tegra30-beaver.dts create mode 100644
> include/configs/beaver.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130418/a3e31d77/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-04-17 16:37 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
c4a4e2e20ca226948b62ed116df98f7a3932f2ac:
ARMv7: start.S: stay in HYP mode if u-boot is entered in it
(2013-04-15 18:30:59 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to f2e8a87305a55652488af140adcf65b1e688f287:
exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
Note: there is a trivial merge conflict for
include/configs/exynos5250-dt.h:
++<<<<<<< HEAD
+/* USB boot mode */
+#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
+#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
+#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
++=======
+ /* TPM */
+ #define CONFIG_TPM
+ #define CONFIG_CMD_TPM
+ #define CONFIG_INFINEON_TPM_I2C
+ #define CONFIG_INFINEON_TPM_I2C_BUS 3
+ #define CONFIG_INFINEON_TPM_I2C_ADDR 0x20
++>>>>>>> u-boot/master
----------------------------------------------------------------
Simon Glass (2):
exynos: Correct use of 64-bit division
exynos: fdt: Add TMU node for snow
Stephen Warren (1):
ARM: tegra: support T33 SKU of Tegra30
Thierry Reding (4):
Tegra: All Tamonten-derived boards use onboard NAND
Tegra: Medcom-Wide: Enable NAND and boot script support
Tegra: Plutux: Enable NAND and boot script support
Tegra: TEC: Enable boot script support
Tom Warren (7):
Tegra: enable verify support for the crc32 command
Tegra: Restore cp15 VBAR _start vector write for ARMv7
Tegra: Configure L2 cache control reg properly.
Tegra114: Initialize System Counter (TSC) with osc frequency
Tegra: Fix MSELECT clock divisors for T30/T114.
Tegra: Split tegra_get_chip_type() into soc & sku funcs
Tegra: T30: Beaver board support.
Vivek Gautam (1):
Exynos5: Add support for USB download boot mode
MAINTAINERS | 1 +
arch/arm/cpu/arm720t/tegra-common/cpu.c | 48 ++++++++-------
arch/arm/cpu/arm720t/tegra-common/cpu.h | 4 +-
arch/arm/cpu/arm720t/tegra114/cpu.c | 10 ++--
arch/arm/cpu/arm720t/tegra30/cpu.c | 4 +-
arch/arm/cpu/armv7/s5p-common/timer.c | 7 ++-
arch/arm/cpu/armv7/start.S | 2 -
arch/arm/cpu/tegra-common/Makefile | 2 +-
arch/arm/cpu/tegra-common/ap.c | 53 +++++++++++------
arch/arm/cpu/tegra-common/cache.c | 48 +++++++++++++++
arch/arm/cpu/tegra-common/clock.c | 3 +
arch/arm/cpu/tegra114-common/clock.c | 22 +++++++
arch/arm/cpu/tegra20-common/clock.c | 4 ++
arch/arm/cpu/tegra20-common/pmu.c | 4 +-
arch/arm/cpu/tegra30-common/clock.c | 4 ++
arch/arm/include/asm/arch-tegra/ap.h | 21 ++++++-
arch/arm/include/asm/arch-tegra/clock.h | 3 +
arch/arm/include/asm/arch-tegra/tegra.h | 1 +
arch/arm/include/asm/arch-tegra114/sysctr.h | 35 +++++++++++
arch/arm/include/asm/arch-tegra114/tegra.h | 1 +
board/avionic-design/dts/tegra20-tamonten.dtsi | 11 ++++
board/avionic-design/dts/tegra20-tec.dts | 11 ----
board/nvidia/common/emc.c | 2 +-
board/nvidia/dts/tegra30-beaver.dts | 71
++++++++++++++++++++++ board/samsung/dts/exynos5250-snow.dts
| 14 +++++ board/samsung/smdk5250/spl_boot.c | 40
++++++++++++- boards.cfg | 1 +
include/configs/beaver.h | 76
++++++++++++++++++++++++
include/configs/exynos5250-dt.h | 5 ++
include/configs/medcom-wide.h | 21 ++++---
include/configs/plutux.h | 18 +++---
include/configs/tec.h | 10 +---
include/configs/tegra-common.h | 2 + 33 files
changed, 467 insertions(+), 92 deletions(-) create mode 100644
arch/arm/cpu/tegra-common/cache.c create mode 100644
arch/arm/include/asm/arch-tegra114/sysctr.h create mode 100644
board/nvidia/dts/tegra30-beaver.dts create mode 100644
include/configs/beaver.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-04-15 19:36 Albert ARIBAUD
@ 2013-04-16 15:58 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-04-16 15:58 UTC (permalink / raw)
To: u-boot
On Mon, Apr 15, 2013 at 09:36:37PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 8960af8ba9488fc54e2e4733cbada26d3cece225:
>
> cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README (2013-04-14
> 17:04:43 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to c4a4e2e20ca226948b62ed116df98f7a3932f2ac:
>
> ARMv7: start.S: stay in HYP mode if u-boot is entered in it
> (2013-04-15 18:30:59 +0200)
>
> ----------------------------------------------------------------
> Andre Przywara (1):
> ARMv7: start.S: stay in HYP mode if u-boot is entered in it
>
> arch/arm/cpu/armv7/start.S | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130416/7ae9161f/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-04-15 19:36 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
8960af8ba9488fc54e2e4733cbada26d3cece225:
cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README (2013-04-14
17:04:43 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to c4a4e2e20ca226948b62ed116df98f7a3932f2ac:
ARMv7: start.S: stay in HYP mode if u-boot is entered in it
(2013-04-15 18:30:59 +0200)
----------------------------------------------------------------
Andre Przywara (1):
ARMv7: start.S: stay in HYP mode if u-boot is entered in it
arch/arm/cpu/armv7/start.S | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-04-14 19:32 Albert ARIBAUD
@ 2013-04-15 15:51 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-04-15 15:51 UTC (permalink / raw)
To: u-boot
On Sun, Apr 14, 2013 at 09:32:04PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 785881f775252940185e10fbb2d5299c9ffa6bce:
>
> env: Add redundant env support to UBI env (2013-04-11 15:52:55 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 8960af8ba9488fc54e2e4733cbada26d3cece225:
>
> cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README (2013-04-14
> 17:04:43 +0200)
>
> ----------------------------------------------------------------
> Abbas Raza (1):
> mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
> board
>
> Ajay Kumar (13):
> video: exynos_fb: Remove callbacks from the driver
> video: exynos_dp: Remove callbacks from the driver
> video: exynos_fb: Make fimd_ctrl global
> EXYNOS: FDT: Add compatible strings for FIMD
> video: exynos_fb: add DT support for FIMD driver
> EXYNOS5: Add device node for FIMD
> SMDK5250: Add device node for FIMD
> video: exynos_dp: Make dp_regs global
> EXYNOS5: FDT: Add compatible strings for FIMD
> video: exynos_dp: Add function to parse DP DT node
> EXYNOS5: Add device node for DP
> SMDK5250: Add device node for DP
> SMDK5250: Use statically defined structures only in non DT case
>
> Akshay Saraswat (8):
> Exynos: clock: Fix a bug in PLL lock check condition
> Exynos: Add hardware accelerated SHA256 and SHA1
> Exynos: config: Enable ACE HW for SHA 256 for Exynos
> gen: Add sha h/w acceleration to hash
> Exynos: config: Enable hash command
> Exynos5: clock: Fix a typo bug in exynos clock init
> Exynos5: config: enable time command
> Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
>
> Albert ARIBAUD (13):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> ARM: Fix __bss_start and __bss_end in linker scripts
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> ARM: fix CONFIG_SPL_MAX_SIZE semantics
> cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT
> da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT
> smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT
> cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
>
> Alexandre Pereira da Silva (1):
> mx23_olinuxino: Fix netboot console
>
> Andreas Bie??mann (6):
> omap3/cpu.h: add BCH support
> asm/omap_gpmc.h: consolidate common defines
> omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
> omap_gpmc: change nandecc command
> omap_gpmc: add support for hw assisted BCH8
> tricorder: enable hw assisted BCH8 in SPL and u-boot
>
> Andrew Gabbasov (1):
> fsl_esdhc: Fix DMA transfer completion waiting loop
>
> Beno??t Th??baudeau (29):
> mx25pdk: Enable imxdi RTC
> nand: mxc: Prepare to add support for i.MX5
> nand: mxc: Add support for i.MX5
> imx: mx5: lowlevel_init: Simplify code
> imx: mx53ard: Add support for NAND Flash
> nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
> nand: mxc: Use appropriate page number in syndrome functions
> arm: start.S: Fix _TEXT_BASE for SPL
> arm: relocate_code() is no longer noreturn
> arm1136: Remove redundant relocate_code() return
> arm: relocate_code(): Remove useless relocation offset computation
> arm: relocate_code(): Use __image_copy_end for end of relocation
> arm: crt0.S: Remove bogus .globl
> autoconfig.mk: Make it possible to define configs from other
> configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
> imx: Fix automatic make targets for imx images
> nand: mxc: Switch NAND SPL to generic SPL
> arm926ejs: Remove deprecated and now unused NAND SPL
> arm: Remove unused relocate_code() parameters
> Makefile: Move SHELL setup to config.mk
> .gitignore: Add /SPL
> imx: Add u-boot-with-spl.imx make target
> imx: Add u-boot-with-nand-spl.imx make target
> arm: Remove support for smdk6400
> Revert "mkconfig: start deprecating Makefile config targets"
> arm: Remove support for unused s3c64xx
> arm: Remove deprecated and now unused NAND SPL
> arm1176: Remove unused MMU setup from start.S
> arm: Make all linker scripts compatible with per-symbol sections
>
> Bin Liu (2):
> musb: am335x: disable bulk split-combine feature
> musb: set MUSB speed based on CONFIG
>
> Che-Liang Chiou (1):
> Exynos: Add timer_get_us function
>
> Dirk Behme (1):
> spi: mxc_spi: Fix ECSPI reset handling
>
> Eric Nelson (3):
> i.MX6: Add hdmidet command to detect attached HDMI monitor
> i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
> fsl_esdhc: flush cache after IO completion
>
> Fabio Estevam (14):
> mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
> configs: mx28evk: Use single-line comments
> mx28evk: Disable CONFIG_CMD_I2C
> Add initial support for Wandboard dual lite and solo.
> mx28evk: Introduce a new target for saving env vars to NAND
> mx6qsabrelite: README: No need to pass 'u-boot.imx'
> mx6: Fix get_board_rev() for the mx6 solo case
> wandboard: Remove duplicate 'mmc dev'
> mx6qsabrelite: Remove duplicate 'mmc dev'
> wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
> mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
> mtd: nand: mxc_nand: Fix is_16bit_nand()
> mx31pdk: Remove watchdog support
> spi: mxc_spi: Set master mode for all channels
>
> Gabe Black (3):
> Exynos: pwm: Fix two bugs in the exynos pwm configuration code
> Exynos: Avoid a divide by zero by specifying a non-zero period
> for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
> driver
>
> Gerlando Falauto (1):
> kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
>
> Holger Brunck (3):
> arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
> arm/km: use CONFIG_NAND_ECC_BCH
> arm/km: add support for kmsuv31 board
>
> Hunter, Jon (4):
> omap2420-h4: Fix DRAM initialisation
> omap2420-h4: Fix booting from NOR flash
> omap2420-h4: Add device tree support
> omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
>
> Javier Martinez Canillas (1):
> i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
> command
>
> Jon Hunter (5):
> omap5912-osk: Fix DRAM initialisation
> omap5912-osk: Fix booting from NOR flash
> omap5912-osk: Fix device initialisation
> omap5912-osk: Increase flash partition for u-boot
> omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
>
> Josh Wu (1):
> logo: update to the new logo for ATMEL
>
> Knut Wohlrab (1):
> imx-common: timer: fix 32-bit overflow
>
> Lars Poeschel (1):
> pcm051: Enable DDR PHY dynamic power down bit
>
> Linus Walleij (1):
> integrator: enable device tree
>
> Lokesh Vutla (1):
> arm: omap4: Fix SDRAM AUTO DETECTION
>
> Lubomir Popov (2):
> OMAP: Fix copy-paste bug that did not enable UART4 clock
> OMAP4: Fix bug in omap4460_volts struct
>
> Manfred Huber (1):
> omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
>
> Minkyu Kang (1):
> exynos: change indentation of defines in cpu.h
>
> Nishanth Menon (1):
> omap5: Allow use of a plain text env file
>
> Otavio Salvador (5):
> mx6qsabresd: Document the mapping of USDHC[2-4]
> mx6qsabresd: Fix card detection for invalid card id case
> mx6qsabre{sd,auto}: Add boot mode select
> mx23_olinuxino: Change definitions to use spaces instead of tabs
> mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no
> arguments
>
> Padmavathi Venna (4):
> Exynos: Add peripherial id for pwm
> Exynos: clock: Add generic api to get the clk freq
> Exynos: clock: Correct pwm source clk selection
> Exynos: pwm: Use generic api to get pwm clk freq
>
> Przemyslaw Marczak (1):
> spl:falcon:trats: Fix SPL image size computing.
>
> Rajeshwari Shinde (1):
> EXYNOS5: Add L2 Cache Support.
>
> SRICHARAN R (4):
> ARM: OMAP5: Rename omap5_evm to omap5_uevm
> ARM: OMAP5: Set fdt_high to enable booting with Device tree
> ARM: OMAP4/5: Change the default boot command to work with device
> tree ARM: OMAP4/5: Make bootz as the default boot command
>
> Simon Glass (1):
> Exynos: Change get_timer() to work correctly
>
> Stephen Warren (1):
> ARM: bcm2835: fix get_timer() to return ms
>
> Tetsuyuki Kobayashi (1):
> BUGFIX: arm: data abort in get_bad_stack_swi
>
> Tom Rini (11):
> am335x: Enable MMC1 clock
> doc/feature-removal-schedule.txt: Add
> CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
> checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
> omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
> am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
> am335x: Update timings for the beaglebone again
> omap5_uevm: Correct to 2MiB aligned partitions on eMMC
> am335x: Really correct DDR timings on new BeagleBone part
> omap5_common.h: Switch to ext4
> VCMA9: Enable CONFIG_CMD_NAND_YAFFS
>
> Vivek Gautam (2):
> SMDK5250: Fix compiler warning for non-dt systems
> spi: exynos: Fix compiler warnings for non-dt systems
>
> man.huber at arcor.de (1):
> omap3: Display MHz instead of mHz on the console
>
> .gitignore
> | 3 +
> MAINTAINERS
> | 5 +-
> Makefile
> | 40 ++----
> README
> | 43 ++++--
> arch/arm/config.mk
> | 2 -
> arch/arm/cpu/arm1136/config.mk
> | 7 +
> arch/arm/cpu/arm1136/omap24xx/timer.c
> | 8 +-
> arch/arm/cpu/arm1136/start.S
> | 31 ++--
> arch/arm/cpu/arm1136/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/arm1176/bcm2835/timer.c
> | 14 +-
> arch/arm/cpu/arm1176/s3c64xx/config.mk
> | 34 -----
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S |
> 135 -----------------
> arch/arm/cpu/arm1176/s3c64xx/init.c
> | 26 ----
> arch/arm/cpu/arm1176/s3c64xx/reset.S
> | 34 -----
> arch/arm/cpu/arm1176/s3c64xx/speed.c |
> 145 -------------------
> arch/arm/cpu/arm1176/s3c64xx/timer.c |
> 160 ---------------------
> arch/arm/cpu/arm1176/start.S |
> 131 +++--------------
> arch/arm/cpu/arm720t/start.S
> | 26 ++--
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds
> | 13 +-
> arch/arm/cpu/arm920t/start.S
> | 28 ++--
> arch/arm/cpu/arm925t/start.S
> | 28 ++--
> arch/arm/cpu/arm926ejs/config.mk
> | 8 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> | 18 +--
> arch/arm/cpu/arm926ejs/mxs/start.S
> | 4 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
> | 6 +-
> arch/arm/cpu/arm926ejs/omap/timer.c
> | 15 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> | 6 +-
> arch/arm/cpu/arm926ejs/start.S
> | 40 ++----
> arch/arm/cpu/arm946es/start.S
> | 28 ++--
> arch/arm/cpu/arm_intcm/start.S
> | 30 ++--
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c
> | 5 +
> arch/arm/cpu/armv7/am33xx/elm.c
> | 2 +-
> arch/arm/cpu/armv7/config.mk
> | 6 +
> arch/arm/cpu/armv7/exynos/clock.c |
> 167 ++++++++++++++++++---
> arch/arm/cpu/armv7/exynos/soc.c
> | 36 +++++
> arch/arm/cpu/armv7/mx5/lowlevel_init.S
> | 8 +-
> arch/arm/cpu/armv7/mx6/soc.c
> | 12 ++
> arch/arm/cpu/armv7/omap-common/clocks-common.c
> | 4 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c
> | 29 ++--
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> | 10 +-
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/armv7/omap3/board.c
> | 31 ++--
> arch/arm/cpu/armv7/omap3/sys_info.c
> | 4 +-
> arch/arm/cpu/armv7/omap4/emif.c
> | 1 -
> arch/arm/cpu/armv7/omap4/hw_data.c
> | 8 +-
> arch/arm/cpu/armv7/omap5/emif.c
> | 1 -
> arch/arm/cpu/armv7/s5p-common/pwm.c
> | 42 +++---
> arch/arm/cpu/armv7/s5p-common/timer.c |
> 117 +++++++--------
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
> | 2 +-
> arch/arm/cpu/armv7/start.S
> | 29 ++--
> arch/arm/cpu/ixp/start.S
> | 28 ++--
> arch/arm/cpu/ixp/u-boot.lds
> | 16 ++-
> arch/arm/cpu/pxa/start.S
> | 29 ++--
> arch/arm/cpu/s3c44b0/start.S
> | 28 ++--
> arch/arm/cpu/sa1100/start.S
> | 28 ++--
> arch/arm/cpu/u-boot-spl.lds
> | 24 ++--
> arch/arm/cpu/u-boot.lds
> | 18 +--
> arch/arm/dts/exynos5250.dtsi
> | 13 ++
> arch/arm/imx-common/Makefile
> | 18 +++ drivers/usb/host/s3c64xx-hcd.c =>
> arch/arm/imx-common/cmd_hdmidet.c | 32 ++---
> arch/arm/imx-common/timer.c
> | 26 +---
> arch/arm/include/asm/arch-am33xx/ddr_defs.h
> | 22 +--
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h
> | 58 +-------
> arch/arm/include/asm/arch-am33xx/spl.h
> | 8 ++
> arch/arm/include/asm/arch-am33xx/sys_proto.h
> | 2 +-
> arch/arm/include/asm/arch-bcm2835/timer.h
> | 2 +
> arch/arm/include/asm/arch-exynos/clk.h
> | 15 ++
> arch/arm/include/asm/arch-exynos/cpu.h
> | 10 +-
> arch/arm/include/asm/arch-exynos/dp_info.h
> | 1 -
> arch/arm/include/asm/arch-exynos/periph.h
> | 5 +
> arch/arm/include/asm/arch-mx5/imx-regs.h
> | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h
> | 1 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h
> | 3 +
> arch/arm/include/asm/arch-omap24xx/omap2420.h
> | 6 +-
> arch/arm/include/asm/arch-omap3/cpu.h
> | 6 +
> arch/arm/include/asm/arch-omap3/omap_gpmc.h
> | 68 ++-------
> arch/arm/include/asm/arch-omap3/spl.h
> | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h
> | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h
> | 1 -
> arch/arm/include/asm/arch-omap4/spl.h
> | 2 +
> arch/arm/include/asm/arch-omap5/omap.h
> | 1 -
> arch/arm/include/asm/arch-omap5/spl.h
> | 2 +
> arch/arm/include/asm/arch-s3c64xx/hardware.h
> | 63 --------
> arch/arm/include/asm/arch-s3c64xx/s3c6400.h |
> 895
> -----------------------------------------------------------------------------------------------------------------
> arch/arm/include/asm/arch-s3c64xx/s3c64x0.h
> | 90 ------------
> arch/arm/include/asm/emif.h
> | 1 -
> arch/arm/include/asm/mach-types.h
> | 13 --
> arch/arm/include/asm/omap_gpmc.h
> | 87 +++++++++++
> arch/arm/lib/crt0.S
> | 52 ++-----
> board/actux1/u-boot.lds
> | 17 ++-
> board/actux2/u-boot.lds
> | 17 ++-
> board/actux3/u-boot.lds
> | 17 ++-
> board/ait/cam_enc_4xx/u-boot-spl.lds
> | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c
> | 8 +-
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds
> | 4 +-
> board/davinci/da8xxevm/u-boot-spl-hawk.lds
> | 9 +-
> board/dvlhost/u-boot.lds
> | 17 ++-
> board/freescale/mx31ads/u-boot.lds
> | 32 +++--
> board/freescale/mx31pdk/Makefile
> | 3 +
> board/freescale/mx31pdk/config.mk
> | 5 -
> board/freescale/mx31pdk/mx31pdk.c
> | 8 ++
> board/freescale/mx53ard/mx53ard.c
> | 66 +++++++++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c
> | 18 +++
> board/freescale/mx6qsabrelite/README
> | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c
> | 8 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c
> | 48 +++++--
> board/isee/igep00x0/igep00x0.c
> | 2 +-
> board/karo/tx25/Makefile
> | 4 +-
> board/karo/tx25/config.mk
> | 5 -
> board/karo/tx25/tx25.c
> | 8 ++
> board/overo/overo.c
> | 2 +-
> board/phytec/pcm051/board.c
> | 3 +-
> board/samsung/dts/exynos5250-smdk5250.dts
> | 40 ++++++
> board/samsung/smdk5250/clock_init.c
> | 22 +--
> board/samsung/smdk5250/setup.h
> | 2 +-
> board/samsung/smdk5250/smdk5250-uboot-spl.lds
> | 4 +-
> board/samsung/smdk5250/smdk5250.c
> | 19 ++-
> board/samsung/smdk6400/.gitignore
> | 5 -
> board/samsung/smdk6400/Makefile
> | 48 -------
> board/samsung/smdk6400/config.mk
> | 30 ----
> board/samsung/smdk6400/lowlevel_init.S |
> 323 -----------------------------------------
> board/samsung/smdk6400/smdk6400.c |
> 134 -----------------
> board/samsung/smdk6400/smdk6400_nand_spl.c
> | 37 -----
> board/samsung/smdk6400/u-boot-nand.lds
> | 86 -----------
> board/samsung/trats/trats.c
> | 6 +-
> board/samsung/universal_c210/universal.c
> | 23 +--
> board/ti/am335x/board.c
> | 2 +-
> board/ti/omap2420h4/config.mk
> | 4 +-
> board/ti/omap2420h4/mem.c
> | 13 --
> board/ti/omap2420h4/omap2420h4.c
> | 24 +++-
> board/ti/omap5912osk/config.mk
> | 12 +-
> board/ti/omap5912osk/lowlevel_init.S
> | 20 +++
> board/ti/omap5912osk/omap5912osk.c
> | 23 ++- board/ti/{omap5_evm =>
> omap5_uevm}/Makefile | 0
> board/ti/{omap5_evm => omap5_uevm}/evm.c
> | 0 board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h | 0
> board/vpac270/u-boot-spl.lds
> | 6 +-
> board/wandboard/Makefile
> | 29 ++++
> board/wandboard/README
> | 40 ++++++
> board/wandboard/wandboard.c |
> 178 +++++++++++++++++++++++
> boards.cfg
> | 10 +-
> common/hash.c
> | 18 +++
> config.mk
> | 7 +
> doc/README.arm-relocation
> | 14 +-
> doc/README.mx28evk
> | 18 +++
> doc/README.omap3
> | 28 ++++
> doc/README.scrapyard
> | 1 +
> doc/device-tree-bindings/video/exynos-dp.txt
> | 69 +++++++++
> doc/device-tree-bindings/video/exynos-fb.txt
> | 92 ++++++++++++
> doc/driver-model/UDM-serial.txt
> | 42 +++---
> doc/feature-removal-schedule.txt
> | 32 ++--- {arch/arm/cpu/arm1176/s3c64xx =>
> drivers/crypto}/Makefile | 27 ++--
> drivers/crypto/ace_sha.c |
> 126 ++++++++++++++++
> drivers/crypto/ace_sha.h |
> 325 +++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/bcm2835_sdhci.c
> | 5 +-
> drivers/mmc/fsl_esdhc.c
> | 15 +-
> drivers/mtd/nand/Makefile
> | 2 +-
> drivers/mtd/nand/kirkwood_nand.c
> | 4 +
> drivers/mtd/nand/mxc_nand.c |
> 260 ++++++++++++++++++++-------------
> drivers/mtd/nand/mxc_nand.h |
> 225 +++++++++++++++++++++++++++++ nand_spl/nand_boot_fsl_nfc.c =>
> drivers/mtd/nand/mxc_nand_spl.c | 130 ++++++++++++-----
> drivers/mtd/nand/ndfc.c
> | 4 +-
> drivers/mtd/nand/omap_gpmc.c |
> 424 +++++++++++++++++++++++++++++++++++++++---------------
> drivers/mtd/nand/s3c64xx.c |
> 295 -------------------------------------
> drivers/mtd/onenand/onenand_base.c
> | 4 -
> drivers/mtd/onenand/samsung.c
> | 60 +-------
> drivers/serial/Makefile
> | 1 -
> drivers/serial/ns16550.c
> | 18 ++-
> drivers/serial/s3c64xx.c |
> 187 ------------------------
> drivers/serial/serial.c
> | 2 -
> drivers/spi/exynos_spi.c
> | 2 +
> drivers/spi/mxc_spi.c
> | 17 +--
> drivers/usb/host/Makefile
> | 1 -
> drivers/usb/host/ohci-hcd.c
> | 1 -
> drivers/usb/musb-new/musb_core.c
> | 7 +
> drivers/usb/musb-new/musb_uboot.c
> | 2 +-
> drivers/video/exynos_dp.c
> | 76 +++++++++-
> drivers/video/exynos_dp_lowlevel.c
> | 69 ++++-----
> drivers/video/exynos_dp_lowlevel.h
> | 1 +
> drivers/video/exynos_fb.c |
> 228 ++++++++++++++++++++++++++---
> drivers/video/exynos_fimd.c
> | 44 +++---
> include/common.h
> | 7 +-
> include/config_fallbacks.h
> | 16 +++
> include/configs/MPC8313ERDB.h
> | 2 +-
> include/configs/VCMA9.h
> | 1 +
> include/configs/am335x_evm.h
> | 1 +
> include/configs/cam_enc_4xx.h
> | 2 +-
> include/configs/da850evm.h
> | 2 +-
> include/configs/dra7xx_evm.h
> | 2 +
> include/configs/exynos5250-dt.h
> | 10 +-
> include/configs/igep00x0.h
> | 3 -
> include/configs/integrator-common.h
> | 1 +
> include/configs/km/km_arm.h
> | 5 +-
> include/configs/km_kirkwood.h
> | 8 ++
> include/configs/mx23_olinuxino.h |
> 162 ++++++++++-----------
> include/configs/mx25pdk.h
> | 4 +
> include/configs/mx28evk.h
> | 92 ++++++------
> include/configs/mx31pdk.h
> | 23 +--
> include/configs/mx53ard.h
> | 10 ++
> include/configs/mx6qsabre_common.h
> | 4 +-
> include/configs/mx6qsabrelite.h
> | 3 -
> include/configs/omap2420h4.h
> | 5 +-
> include/configs/omap4_common.h
> | 22 ++-
> include/configs/omap5912osk.h
> | 15 +-
> include/configs/omap5_common.h
> | 53 ++++--- include/configs/{omap5_evm.h =>
> omap5_uevm.h} | 17 +++
> include/configs/p1_p2_rdb_pc.h
> | 2 +-
> include/configs/rpi_b.h
> | 2 +-
> include/configs/smdk6400.h |
> 296 --------------------------------------
> include/configs/tegra-common.h
> | 2 +-
> include/configs/trats.h
> | 1 +
> include/configs/tricorder.h
> | 13 +-
> include/configs/tx25.h
> | 22 +--
> include/configs/wandboard.h |
> 209 +++++++++++++++++++++++++++
> include/fdtdec.h
> | 2 +
> include/fsl_esdhc.h
> | 5 +-
> include/fsl_nfc.h |
> 170 ----------------------
> include/hw_sha.h
> | 50 +++++++
> include/lcd.h
> | 9 --
> include/onenand_uboot.h
> | 4 -
> lib/Makefile
> | 2 +-
> lib/fdtdec.c
> | 2 +
> mkconfig
> | 9 --
> nand_spl/board/freescale/mx31pdk/Makefile
> | 63 --------
> nand_spl/board/freescale/mx31pdk/u-boot.lds
> | 87 -----------
> nand_spl/board/karo/tx25/Makefile
> | 84 -----------
> nand_spl/board/karo/tx25/config.mk
> | 1 -
> nand_spl/board/karo/tx25/u-boot.lds
> | 85 -----------
> nand_spl/board/samsung/smdk6400/Makefile |
> 117 ---------------
> nand_spl/board/samsung/smdk6400/config.mk
> | 40 ------
> nand_spl/board/samsung/smdk6400/u-boot.lds
> | 80 -----------
> tools/logos/atmel.bmp |
> Bin 26334 -> 15478 bytes
> tools/scripts/define2mk.sed
> | 2 + 233 files changed, 4058 insertions(+), 5369 deletions(-)
> delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode
> 100644 arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/timer.c rename
> drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
> (65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
> delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
> mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
> 100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
> board/freescale/mx31pdk/config.mk delete mode 100644
> board/karo/tx25/config.mk delete mode 100644
> board/samsung/smdk6400/.gitignore delete mode 100644
> board/samsung/smdk6400/Makefile delete mode 100644
> board/samsung/smdk6400/config.mk delete mode 100644
> board/samsung/smdk6400/lowlevel_init.S delete mode 100644
> board/samsung/smdk6400/smdk6400.c delete mode 100644
> board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
> board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
> omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h (100%) create mode 100644
> board/wandboard/Makefile create mode 100644 board/wandboard/README
> create mode 100644 board/wandboard/wandboard.c create mode 100644
> doc/device-tree-bindings/video/exynos-dp.txt create mode 100644
> doc/device-tree-bindings/video/exynos-fb.txt rename
> {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%) create
> mode 100644 drivers/crypto/ace_sha.c create mode 100644
> drivers/crypto/ace_sha.h create mode 100644
> drivers/mtd/nand/mxc_nand.h rename nand_spl/nand_boot_fsl_nfc.c =>
> drivers/mtd/nand/mxc_nand_spl.c (65%) delete mode 100644
> drivers/mtd/nand/s3c64xx.c delete mode 100644 drivers/serial/s3c64xx.c
> rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%) delete mode
> 100644 include/configs/smdk6400.h create mode 100644
> include/configs/wandboard.h delete mode 100644 include/fsl_nfc.h
> create mode 100644 include/hw_sha.h delete mode 100644
> nand_spl/board/freescale/mx31pdk/Makefile delete mode 100644
> nand_spl/board/freescale/mx31pdk/u-boot.lds delete mode 100644
> nand_spl/board/karo/tx25/Makefile delete mode 100644
> nand_spl/board/karo/tx25/config.mk delete mode 100644
> nand_spl/board/karo/tx25/u-boot.lds delete mode 100644
> nand_spl/board/samsung/smdk6400/Makefile delete mode 100644
> nand_spl/board/samsung/smdk6400/config.mk delete mode 100644
> nand_spl/board/samsung/smdk6400/u-boot.lds
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130415/bc858e68/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-04-14 19:32 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
785881f775252940185e10fbb2d5299c9ffa6bce:
env: Add redundant env support to UBI env (2013-04-11 15:52:55 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 8960af8ba9488fc54e2e4733cbada26d3cece225:
cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README (2013-04-14
17:04:43 +0200)
----------------------------------------------------------------
Abbas Raza (1):
mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
board
Ajay Kumar (13):
video: exynos_fb: Remove callbacks from the driver
video: exynos_dp: Remove callbacks from the driver
video: exynos_fb: Make fimd_ctrl global
EXYNOS: FDT: Add compatible strings for FIMD
video: exynos_fb: add DT support for FIMD driver
EXYNOS5: Add device node for FIMD
SMDK5250: Add device node for FIMD
video: exynos_dp: Make dp_regs global
EXYNOS5: FDT: Add compatible strings for FIMD
video: exynos_dp: Add function to parse DP DT node
EXYNOS5: Add device node for DP
SMDK5250: Add device node for DP
SMDK5250: Use statically defined structures only in non DT case
Akshay Saraswat (8):
Exynos: clock: Fix a bug in PLL lock check condition
Exynos: Add hardware accelerated SHA256 and SHA1
Exynos: config: Enable ACE HW for SHA 256 for Exynos
gen: Add sha h/w acceleration to hash
Exynos: config: Enable hash command
Exynos5: clock: Fix a typo bug in exynos clock init
Exynos5: config: enable time command
Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
Albert ARIBAUD (13):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
ARM: Fix __bss_start and __bss_end in linker scripts
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
ARM: fix CONFIG_SPL_MAX_SIZE semantics
cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT
da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT
smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT
cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
Alexandre Pereira da Silva (1):
mx23_olinuxino: Fix netboot console
Andreas Bie?mann (6):
omap3/cpu.h: add BCH support
asm/omap_gpmc.h: consolidate common defines
omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
omap_gpmc: change nandecc command
omap_gpmc: add support for hw assisted BCH8
tricorder: enable hw assisted BCH8 in SPL and u-boot
Andrew Gabbasov (1):
fsl_esdhc: Fix DMA transfer completion waiting loop
Beno?t Th?baudeau (29):
mx25pdk: Enable imxdi RTC
nand: mxc: Prepare to add support for i.MX5
nand: mxc: Add support for i.MX5
imx: mx5: lowlevel_init: Simplify code
imx: mx53ard: Add support for NAND Flash
nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
nand: mxc: Use appropriate page number in syndrome functions
arm: start.S: Fix _TEXT_BASE for SPL
arm: relocate_code() is no longer noreturn
arm1136: Remove redundant relocate_code() return
arm: relocate_code(): Remove useless relocation offset computation
arm: relocate_code(): Use __image_copy_end for end of relocation
arm: crt0.S: Remove bogus .globl
autoconfig.mk: Make it possible to define configs from other
configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
imx: Fix automatic make targets for imx images
nand: mxc: Switch NAND SPL to generic SPL
arm926ejs: Remove deprecated and now unused NAND SPL
arm: Remove unused relocate_code() parameters
Makefile: Move SHELL setup to config.mk
.gitignore: Add /SPL
imx: Add u-boot-with-spl.imx make target
imx: Add u-boot-with-nand-spl.imx make target
arm: Remove support for smdk6400
Revert "mkconfig: start deprecating Makefile config targets"
arm: Remove support for unused s3c64xx
arm: Remove deprecated and now unused NAND SPL
arm1176: Remove unused MMU setup from start.S
arm: Make all linker scripts compatible with per-symbol sections
Bin Liu (2):
musb: am335x: disable bulk split-combine feature
musb: set MUSB speed based on CONFIG
Che-Liang Chiou (1):
Exynos: Add timer_get_us function
Dirk Behme (1):
spi: mxc_spi: Fix ECSPI reset handling
Eric Nelson (3):
i.MX6: Add hdmidet command to detect attached HDMI monitor
i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
fsl_esdhc: flush cache after IO completion
Fabio Estevam (14):
mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
configs: mx28evk: Use single-line comments
mx28evk: Disable CONFIG_CMD_I2C
Add initial support for Wandboard dual lite and solo.
mx28evk: Introduce a new target for saving env vars to NAND
mx6qsabrelite: README: No need to pass 'u-boot.imx'
mx6: Fix get_board_rev() for the mx6 solo case
wandboard: Remove duplicate 'mmc dev'
mx6qsabrelite: Remove duplicate 'mmc dev'
wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
mtd: nand: mxc_nand: Fix is_16bit_nand()
mx31pdk: Remove watchdog support
spi: mxc_spi: Set master mode for all channels
Gabe Black (3):
Exynos: pwm: Fix two bugs in the exynos pwm configuration code
Exynos: Avoid a divide by zero by specifying a non-zero period
for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
driver
Gerlando Falauto (1):
kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
Holger Brunck (3):
arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
arm/km: use CONFIG_NAND_ECC_BCH
arm/km: add support for kmsuv31 board
Hunter, Jon (4):
omap2420-h4: Fix DRAM initialisation
omap2420-h4: Fix booting from NOR flash
omap2420-h4: Add device tree support
omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
Javier Martinez Canillas (1):
i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
command
Jon Hunter (5):
omap5912-osk: Fix DRAM initialisation
omap5912-osk: Fix booting from NOR flash
omap5912-osk: Fix device initialisation
omap5912-osk: Increase flash partition for u-boot
omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
Josh Wu (1):
logo: update to the new logo for ATMEL
Knut Wohlrab (1):
imx-common: timer: fix 32-bit overflow
Lars Poeschel (1):
pcm051: Enable DDR PHY dynamic power down bit
Linus Walleij (1):
integrator: enable device tree
Lokesh Vutla (1):
arm: omap4: Fix SDRAM AUTO DETECTION
Lubomir Popov (2):
OMAP: Fix copy-paste bug that did not enable UART4 clock
OMAP4: Fix bug in omap4460_volts struct
Manfred Huber (1):
omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Minkyu Kang (1):
exynos: change indentation of defines in cpu.h
Nishanth Menon (1):
omap5: Allow use of a plain text env file
Otavio Salvador (5):
mx6qsabresd: Document the mapping of USDHC[2-4]
mx6qsabresd: Fix card detection for invalid card id case
mx6qsabre{sd,auto}: Add boot mode select
mx23_olinuxino: Change definitions to use spaces instead of tabs
mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no
arguments
Padmavathi Venna (4):
Exynos: Add peripherial id for pwm
Exynos: clock: Add generic api to get the clk freq
Exynos: clock: Correct pwm source clk selection
Exynos: pwm: Use generic api to get pwm clk freq
Przemyslaw Marczak (1):
spl:falcon:trats: Fix SPL image size computing.
Rajeshwari Shinde (1):
EXYNOS5: Add L2 Cache Support.
SRICHARAN R (4):
ARM: OMAP5: Rename omap5_evm to omap5_uevm
ARM: OMAP5: Set fdt_high to enable booting with Device tree
ARM: OMAP4/5: Change the default boot command to work with device
tree ARM: OMAP4/5: Make bootz as the default boot command
Simon Glass (1):
Exynos: Change get_timer() to work correctly
Stephen Warren (1):
ARM: bcm2835: fix get_timer() to return ms
Tetsuyuki Kobayashi (1):
BUGFIX: arm: data abort in get_bad_stack_swi
Tom Rini (11):
am335x: Enable MMC1 clock
doc/feature-removal-schedule.txt: Add
CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
am335x: Update timings for the beaglebone again
omap5_uevm: Correct to 2MiB aligned partitions on eMMC
am335x: Really correct DDR timings on new BeagleBone part
omap5_common.h: Switch to ext4
VCMA9: Enable CONFIG_CMD_NAND_YAFFS
Vivek Gautam (2):
SMDK5250: Fix compiler warning for non-dt systems
spi: exynos: Fix compiler warnings for non-dt systems
man.huber at arcor.de (1):
omap3: Display MHz instead of mHz on the console
.gitignore
| 3 +
MAINTAINERS
| 5 +-
Makefile
| 40 ++----
README
| 43 ++++--
arch/arm/config.mk
| 2 -
arch/arm/cpu/arm1136/config.mk
| 7 +
arch/arm/cpu/arm1136/omap24xx/timer.c
| 8 +-
arch/arm/cpu/arm1136/start.S
| 31 ++--
arch/arm/cpu/arm1136/u-boot-spl.lds
| 2 +-
arch/arm/cpu/arm1176/bcm2835/timer.c
| 14 +-
arch/arm/cpu/arm1176/s3c64xx/config.mk
| 34 -----
arch/arm/cpu/arm1176/s3c64xx/cpu_init.S |
135 -----------------
arch/arm/cpu/arm1176/s3c64xx/init.c
| 26 ----
arch/arm/cpu/arm1176/s3c64xx/reset.S
| 34 -----
arch/arm/cpu/arm1176/s3c64xx/speed.c |
145 -------------------
arch/arm/cpu/arm1176/s3c64xx/timer.c |
160 ---------------------
arch/arm/cpu/arm1176/start.S |
131 +++--------------
arch/arm/cpu/arm720t/start.S
| 26 ++--
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 13 +-
arch/arm/cpu/arm920t/start.S
| 28 ++--
arch/arm/cpu/arm925t/start.S
| 28 ++--
arch/arm/cpu/arm926ejs/config.mk
| 8 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 18 +--
arch/arm/cpu/arm926ejs/mxs/start.S
| 4 +
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
| 6 +-
arch/arm/cpu/arm926ejs/omap/timer.c
| 15 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 6 +-
arch/arm/cpu/arm926ejs/start.S
| 40 ++----
arch/arm/cpu/arm946es/start.S
| 28 ++--
arch/arm/cpu/arm_intcm/start.S
| 30 ++--
arch/arm/cpu/armv7/am33xx/clock_am33xx.c
| 5 +
arch/arm/cpu/armv7/am33xx/elm.c
| 2 +-
arch/arm/cpu/armv7/config.mk
| 6 +
arch/arm/cpu/armv7/exynos/clock.c |
167 ++++++++++++++++++---
arch/arm/cpu/armv7/exynos/soc.c
| 36 +++++
arch/arm/cpu/armv7/mx5/lowlevel_init.S
| 8 +-
arch/arm/cpu/armv7/mx6/soc.c
| 12 ++
arch/arm/cpu/armv7/omap-common/clocks-common.c
| 4 +-
arch/arm/cpu/armv7/omap-common/emif-common.c
| 29 ++--
arch/arm/cpu/armv7/omap-common/lowlevel_init.S
| 10 +-
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
| 2 +-
arch/arm/cpu/armv7/omap3/board.c
| 31 ++--
arch/arm/cpu/armv7/omap3/sys_info.c
| 4 +-
arch/arm/cpu/armv7/omap4/emif.c
| 1 -
arch/arm/cpu/armv7/omap4/hw_data.c
| 8 +-
arch/arm/cpu/armv7/omap5/emif.c
| 1 -
arch/arm/cpu/armv7/s5p-common/pwm.c
| 42 +++---
arch/arm/cpu/armv7/s5p-common/timer.c |
117 +++++++--------
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
| 2 +-
arch/arm/cpu/armv7/start.S
| 29 ++--
arch/arm/cpu/ixp/start.S
| 28 ++--
arch/arm/cpu/ixp/u-boot.lds
| 16 ++-
arch/arm/cpu/pxa/start.S
| 29 ++--
arch/arm/cpu/s3c44b0/start.S
| 28 ++--
arch/arm/cpu/sa1100/start.S
| 28 ++--
arch/arm/cpu/u-boot-spl.lds
| 24 ++--
arch/arm/cpu/u-boot.lds
| 18 +--
arch/arm/dts/exynos5250.dtsi
| 13 ++
arch/arm/imx-common/Makefile
| 18 +++ drivers/usb/host/s3c64xx-hcd.c =>
arch/arm/imx-common/cmd_hdmidet.c | 32 ++---
arch/arm/imx-common/timer.c
| 26 +---
arch/arm/include/asm/arch-am33xx/ddr_defs.h
| 22 +--
arch/arm/include/asm/arch-am33xx/omap_gpmc.h
| 58 +-------
arch/arm/include/asm/arch-am33xx/spl.h
| 8 ++
arch/arm/include/asm/arch-am33xx/sys_proto.h
| 2 +-
arch/arm/include/asm/arch-bcm2835/timer.h
| 2 +
arch/arm/include/asm/arch-exynos/clk.h
| 15 ++
arch/arm/include/asm/arch-exynos/cpu.h
| 10 +-
arch/arm/include/asm/arch-exynos/dp_info.h
| 1 -
arch/arm/include/asm/arch-exynos/periph.h
| 5 +
arch/arm/include/asm/arch-mx5/imx-regs.h
| 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h
| 1 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 3 +
arch/arm/include/asm/arch-omap24xx/omap2420.h
| 6 +-
arch/arm/include/asm/arch-omap3/cpu.h
| 6 +
arch/arm/include/asm/arch-omap3/omap_gpmc.h
| 68 ++-------
arch/arm/include/asm/arch-omap3/spl.h
| 3 +
arch/arm/include/asm/arch-omap3/sys_proto.h
| 2 +-
arch/arm/include/asm/arch-omap4/omap.h
| 1 -
arch/arm/include/asm/arch-omap4/spl.h
| 2 +
arch/arm/include/asm/arch-omap5/omap.h
| 1 -
arch/arm/include/asm/arch-omap5/spl.h
| 2 +
arch/arm/include/asm/arch-s3c64xx/hardware.h
| 63 --------
arch/arm/include/asm/arch-s3c64xx/s3c6400.h |
895
-----------------------------------------------------------------------------------------------------------------
arch/arm/include/asm/arch-s3c64xx/s3c64x0.h
| 90 ------------
arch/arm/include/asm/emif.h
| 1 -
arch/arm/include/asm/mach-types.h
| 13 --
arch/arm/include/asm/omap_gpmc.h
| 87 +++++++++++
arch/arm/lib/crt0.S
| 52 ++-----
board/actux1/u-boot.lds
| 17 ++-
board/actux2/u-boot.lds
| 17 ++-
board/actux3/u-boot.lds
| 17 ++-
board/ait/cam_enc_4xx/u-boot-spl.lds
| 4 +-
board/boundary/nitrogen6x/nitrogen6x.c
| 8 +-
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
| 4 +-
board/davinci/da8xxevm/u-boot-spl-hawk.lds
| 9 +-
board/dvlhost/u-boot.lds
| 17 ++-
board/freescale/mx31ads/u-boot.lds
| 32 +++--
board/freescale/mx31pdk/Makefile
| 3 +
board/freescale/mx31pdk/config.mk
| 5 -
board/freescale/mx31pdk/mx31pdk.c
| 8 ++
board/freescale/mx53ard/mx53ard.c
| 66 +++++++++
board/freescale/mx6qsabreauto/mx6qsabreauto.c
| 18 +++
board/freescale/mx6qsabrelite/README
| 4 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c
| 8 +-
board/freescale/mx6qsabresd/mx6qsabresd.c
| 48 +++++--
board/isee/igep00x0/igep00x0.c
| 2 +-
board/karo/tx25/Makefile
| 4 +-
board/karo/tx25/config.mk
| 5 -
board/karo/tx25/tx25.c
| 8 ++
board/overo/overo.c
| 2 +-
board/phytec/pcm051/board.c
| 3 +-
board/samsung/dts/exynos5250-smdk5250.dts
| 40 ++++++
board/samsung/smdk5250/clock_init.c
| 22 +--
board/samsung/smdk5250/setup.h
| 2 +-
board/samsung/smdk5250/smdk5250-uboot-spl.lds
| 4 +-
board/samsung/smdk5250/smdk5250.c
| 19 ++-
board/samsung/smdk6400/.gitignore
| 5 -
board/samsung/smdk6400/Makefile
| 48 -------
board/samsung/smdk6400/config.mk
| 30 ----
board/samsung/smdk6400/lowlevel_init.S |
323 -----------------------------------------
board/samsung/smdk6400/smdk6400.c |
134 -----------------
board/samsung/smdk6400/smdk6400_nand_spl.c
| 37 -----
board/samsung/smdk6400/u-boot-nand.lds
| 86 -----------
board/samsung/trats/trats.c
| 6 +-
board/samsung/universal_c210/universal.c
| 23 +--
board/ti/am335x/board.c
| 2 +-
board/ti/omap2420h4/config.mk
| 4 +-
board/ti/omap2420h4/mem.c
| 13 --
board/ti/omap2420h4/omap2420h4.c
| 24 +++-
board/ti/omap5912osk/config.mk
| 12 +-
board/ti/omap5912osk/lowlevel_init.S
| 20 +++
board/ti/omap5912osk/omap5912osk.c
| 23 ++- board/ti/{omap5_evm =>
omap5_uevm}/Makefile | 0
board/ti/{omap5_evm => omap5_uevm}/evm.c
| 0 board/ti/{omap5_evm =>
omap5_uevm}/mux_data.h | 0
board/vpac270/u-boot-spl.lds
| 6 +-
board/wandboard/Makefile
| 29 ++++
board/wandboard/README
| 40 ++++++
board/wandboard/wandboard.c |
178 +++++++++++++++++++++++
boards.cfg
| 10 +-
common/hash.c
| 18 +++
config.mk
| 7 +
doc/README.arm-relocation
| 14 +-
doc/README.mx28evk
| 18 +++
doc/README.omap3
| 28 ++++
doc/README.scrapyard
| 1 +
doc/device-tree-bindings/video/exynos-dp.txt
| 69 +++++++++
doc/device-tree-bindings/video/exynos-fb.txt
| 92 ++++++++++++
doc/driver-model/UDM-serial.txt
| 42 +++---
doc/feature-removal-schedule.txt
| 32 ++--- {arch/arm/cpu/arm1176/s3c64xx =>
drivers/crypto}/Makefile | 27 ++--
drivers/crypto/ace_sha.c |
126 ++++++++++++++++
drivers/crypto/ace_sha.h |
325 +++++++++++++++++++++++++++++++++++++++++
drivers/mmc/bcm2835_sdhci.c
| 5 +-
drivers/mmc/fsl_esdhc.c
| 15 +-
drivers/mtd/nand/Makefile
| 2 +-
drivers/mtd/nand/kirkwood_nand.c
| 4 +
drivers/mtd/nand/mxc_nand.c |
260 ++++++++++++++++++++-------------
drivers/mtd/nand/mxc_nand.h |
225 +++++++++++++++++++++++++++++ nand_spl/nand_boot_fsl_nfc.c =>
drivers/mtd/nand/mxc_nand_spl.c | 130 ++++++++++++-----
drivers/mtd/nand/ndfc.c
| 4 +-
drivers/mtd/nand/omap_gpmc.c |
424 +++++++++++++++++++++++++++++++++++++++---------------
drivers/mtd/nand/s3c64xx.c |
295 -------------------------------------
drivers/mtd/onenand/onenand_base.c
| 4 -
drivers/mtd/onenand/samsung.c
| 60 +-------
drivers/serial/Makefile
| 1 -
drivers/serial/ns16550.c
| 18 ++-
drivers/serial/s3c64xx.c |
187 ------------------------
drivers/serial/serial.c
| 2 -
drivers/spi/exynos_spi.c
| 2 +
drivers/spi/mxc_spi.c
| 17 +--
drivers/usb/host/Makefile
| 1 -
drivers/usb/host/ohci-hcd.c
| 1 -
drivers/usb/musb-new/musb_core.c
| 7 +
drivers/usb/musb-new/musb_uboot.c
| 2 +-
drivers/video/exynos_dp.c
| 76 +++++++++-
drivers/video/exynos_dp_lowlevel.c
| 69 ++++-----
drivers/video/exynos_dp_lowlevel.h
| 1 +
drivers/video/exynos_fb.c |
228 ++++++++++++++++++++++++++---
drivers/video/exynos_fimd.c
| 44 +++---
include/common.h
| 7 +-
include/config_fallbacks.h
| 16 +++
include/configs/MPC8313ERDB.h
| 2 +-
include/configs/VCMA9.h
| 1 +
include/configs/am335x_evm.h
| 1 +
include/configs/cam_enc_4xx.h
| 2 +-
include/configs/da850evm.h
| 2 +-
include/configs/dra7xx_evm.h
| 2 +
include/configs/exynos5250-dt.h
| 10 +-
include/configs/igep00x0.h
| 3 -
include/configs/integrator-common.h
| 1 +
include/configs/km/km_arm.h
| 5 +-
include/configs/km_kirkwood.h
| 8 ++
include/configs/mx23_olinuxino.h |
162 ++++++++++-----------
include/configs/mx25pdk.h
| 4 +
include/configs/mx28evk.h
| 92 ++++++------
include/configs/mx31pdk.h
| 23 +--
include/configs/mx53ard.h
| 10 ++
include/configs/mx6qsabre_common.h
| 4 +-
include/configs/mx6qsabrelite.h
| 3 -
include/configs/omap2420h4.h
| 5 +-
include/configs/omap4_common.h
| 22 ++-
include/configs/omap5912osk.h
| 15 +-
include/configs/omap5_common.h
| 53 ++++--- include/configs/{omap5_evm.h =>
omap5_uevm.h} | 17 +++
include/configs/p1_p2_rdb_pc.h
| 2 +-
include/configs/rpi_b.h
| 2 +-
include/configs/smdk6400.h |
296 --------------------------------------
include/configs/tegra-common.h
| 2 +-
include/configs/trats.h
| 1 +
include/configs/tricorder.h
| 13 +-
include/configs/tx25.h
| 22 +--
include/configs/wandboard.h |
209 +++++++++++++++++++++++++++
include/fdtdec.h
| 2 +
include/fsl_esdhc.h
| 5 +-
include/fsl_nfc.h |
170 ----------------------
include/hw_sha.h
| 50 +++++++
include/lcd.h
| 9 --
include/onenand_uboot.h
| 4 -
lib/Makefile
| 2 +-
lib/fdtdec.c
| 2 +
mkconfig
| 9 --
nand_spl/board/freescale/mx31pdk/Makefile
| 63 --------
nand_spl/board/freescale/mx31pdk/u-boot.lds
| 87 -----------
nand_spl/board/karo/tx25/Makefile
| 84 -----------
nand_spl/board/karo/tx25/config.mk
| 1 -
nand_spl/board/karo/tx25/u-boot.lds
| 85 -----------
nand_spl/board/samsung/smdk6400/Makefile |
117 ---------------
nand_spl/board/samsung/smdk6400/config.mk
| 40 ------
nand_spl/board/samsung/smdk6400/u-boot.lds
| 80 -----------
tools/logos/atmel.bmp |
Bin 26334 -> 15478 bytes
tools/scripts/define2mk.sed
| 2 + 233 files changed, 4058 insertions(+), 5369 deletions(-)
delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode
100644 arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/timer.c rename
drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
(65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
board/freescale/mx31pdk/config.mk delete mode 100644
board/karo/tx25/config.mk delete mode 100644
board/samsung/smdk6400/.gitignore delete mode 100644
board/samsung/smdk6400/Makefile delete mode 100644
board/samsung/smdk6400/config.mk delete mode 100644
board/samsung/smdk6400/lowlevel_init.S delete mode 100644
board/samsung/smdk6400/smdk6400.c delete mode 100644
board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/mux_data.h (100%) create mode 100644
board/wandboard/Makefile create mode 100644 board/wandboard/README
create mode 100644 board/wandboard/wandboard.c create mode 100644
doc/device-tree-bindings/video/exynos-dp.txt create mode 100644
doc/device-tree-bindings/video/exynos-fb.txt rename
{arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%) create
mode 100644 drivers/crypto/ace_sha.c create mode 100644
drivers/crypto/ace_sha.h create mode 100644
drivers/mtd/nand/mxc_nand.h rename nand_spl/nand_boot_fsl_nfc.c =>
drivers/mtd/nand/mxc_nand_spl.c (65%) delete mode 100644
drivers/mtd/nand/s3c64xx.c delete mode 100644 drivers/serial/s3c64xx.c
rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%) delete mode
100644 include/configs/smdk6400.h create mode 100644
include/configs/wandboard.h delete mode 100644 include/fsl_nfc.h
create mode 100644 include/hw_sha.h delete mode 100644
nand_spl/board/freescale/mx31pdk/Makefile delete mode 100644
nand_spl/board/freescale/mx31pdk/u-boot.lds delete mode 100644
nand_spl/board/karo/tx25/Makefile delete mode 100644
nand_spl/board/karo/tx25/config.mk delete mode 100644
nand_spl/board/karo/tx25/u-boot.lds delete mode 100644
nand_spl/board/samsung/smdk6400/Makefile delete mode 100644
nand_spl/board/samsung/smdk6400/config.mk delete mode 100644
nand_spl/board/samsung/smdk6400/u-boot.lds
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-04-10 23:20 ` Benoît Thébaudeau
@ 2013-04-11 6:10 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2013-04-11 6:10 UTC (permalink / raw)
To: u-boot
Hi Beno?t,
On Thu, 11 Apr 2013 01:20:44 +0200 (CEST), Beno?t Th?baudeau
<benoit.thebaudeau@advansee.com> wrote:
> Hi Albert,
>
> On Thursday, April 11, 2013 1:12:17 AM, Albert ARIBAUD wrote:
> > Hello,
> >
> > The following changes since commit
> > 009d75ccc11d27b9a083375a88bb93cb746b4800:
> >
> > Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
> > 18:50:01 +0100)
> >
> > are available in the git repository at:
> >
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to aad17a2f2bdd0b456522e24a90a0f8b8d8adb1f9:
> >
> > ARM: fix CONFIG_SPL_MAX_SIZE semantics (2013-04-11 00:18:03 +0200)
> >
> > *** NOTE *** there should be a single, and trivial, merge conflict on
> > file drivers/video/exynos_fb.c.
> You have forgotten to apply this one:
> http://patchwork.ozlabs.org/patch/233964/
Thanks for pointing it out -- it got flushed from my mental cache by
the SPL max size one.
I have superseded my original request, am build-testing for any hiccup,
and will sent out an amended PR including 233964 (with the typo in the
commit fixed).
> Best regards,
> Beno?t
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-04-10 23:12 Albert ARIBAUD
@ 2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Benoît Thébaudeau @ 2013-04-10 23:20 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Thursday, April 11, 2013 1:12:17 AM, Albert ARIBAUD wrote:
> Hello,
>
> The following changes since commit
> 009d75ccc11d27b9a083375a88bb93cb746b4800:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
> 18:50:01 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to aad17a2f2bdd0b456522e24a90a0f8b8d8adb1f9:
>
> ARM: fix CONFIG_SPL_MAX_SIZE semantics (2013-04-11 00:18:03 +0200)
>
> *** NOTE *** there should be a single, and trivial, merge conflict on
> file drivers/video/exynos_fb.c.
>
> ----------------------------------------------------------------
> Abbas Raza (1):
> mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
> board
>
> Ajay Kumar (13):
> video: exynos_fb: Remove callbacks from the driver
> video: exynos_dp: Remove callbacks from the driver
> video: exynos_fb: Make fimd_ctrl global
> EXYNOS: FDT: Add compatible strings for FIMD
> video: exynos_fb: add DT support for FIMD driver
> EXYNOS5: Add device node for FIMD
> SMDK5250: Add device node for FIMD
> video: exynos_dp: Make dp_regs global
> EXYNOS5: FDT: Add compatible strings for FIMD
> video: exynos_dp: Add function to parse DP DT node
> EXYNOS5: Add device node for DP
> SMDK5250: Add device node for DP
> SMDK5250: Use statically defined structures only in non DT case
>
> Akshay Saraswat (8):
> Exynos: clock: Fix a bug in PLL lock check condition
> Exynos: Add hardware accelerated SHA256 and SHA1
> Exynos: config: Enable ACE HW for SHA 256 for Exynos
> gen: Add sha h/w acceleration to hash
> Exynos: config: Enable hash command
> Exynos5: clock: Fix a typo bug in exynos clock init
> Exynos5: config: enable time command
> Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
>
> Albert ARIBAUD (7):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
> da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
> smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
> ARM: fix CONFIG_SPL_MAX_SIZE semantics
>
> Alexandre Pereira da Silva (1):
> mx23_olinuxino: Fix netboot console
>
> Andreas Bie?mann (6):
> omap3/cpu.h: add BCH support
> asm/omap_gpmc.h: consolidate common defines
> omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
> omap_gpmc: change nandecc command
> omap_gpmc: add support for hw assisted BCH8
> tricorder: enable hw assisted BCH8 in SPL and u-boot
>
> Beno?t Th?baudeau (29):
> mx25pdk: Enable imxdi RTC
> nand: mxc: Prepare to add support for i.MX5
> nand: mxc: Add support for i.MX5
> imx: mx5: lowlevel_init: Simplify code
> imx: mx53ard: Add support for NAND Flash
> nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
> nand: mxc: Use appropriate page number in syndrome functions
> arm: start.S: Fix _TEXT_BASE for SPL
> arm: relocate_code() is no longer noreturn
> arm1136: Remove redundant relocate_code() return
> arm: relocate_code(): Remove useless relocation offset computation
> arm: relocate_code(): Use __image_copy_end for end of relocation
> arm: crt0.S: Remove bogus .globl
> autoconfig.mk: Make it possible to define configs from other
> configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
> imx: Fix automatic make targets for imx images
> nand: mxc: Switch NAND SPL to generic SPL
> arm926ejs: Remove deprecated and now unused NAND SPL
> arm: Remove unused relocate_code() parameters
> Makefile: Move SHELL setup to config.mk
> .gitignore: Add /SPL
> imx: Add u-boot-with-spl.imx make target
> imx: Add u-boot-with-nand-spl.imx make target
> arm: Remove support for smdk6400
> Revert "mkconfig: start deprecating Makefile config targets"
> arm: Remove support for unused s3c64xx
> arm: Remove deprecated and now unused NAND SPL
> arm1176: Remove unused MMU setup from start.S
> arm: Make all linker scripts compatible with per-symbol sections
>
> Bin Liu (2):
> musb: am335x: disable bulk split-combine feature
> musb: set MUSB speed based on CONFIG
>
> Che-Liang Chiou (1):
> Exynos: Add timer_get_us function
>
> Dirk Behme (1):
> spi: mxc_spi: Fix ECSPI reset handling
>
> Eric Nelson (2):
> i.MX6: Add hdmidet command to detect attached HDMI monitor
> i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
>
> Fabio Estevam (13):
> mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
> configs: mx28evk: Use single-line comments
> mx28evk: Disable CONFIG_CMD_I2C
> Add initial support for Wandboard dual lite and solo.
> mx28evk: Introduce a new target for saving env vars to NAND
> mx6qsabrelite: README: No need to pass 'u-boot.imx'
> mx6: Fix get_board_rev() for the mx6 solo case
> wandboard: Remove duplicate 'mmc dev'
> mx6qsabrelite: Remove duplicate 'mmc dev'
> wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
> mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
> mtd: nand: mxc_nand: Fix is_16bit_nand()
> mx31pdk: Remove watchdog support
>
> Gabe Black (3):
> Exynos: pwm: Fix two bugs in the exynos pwm configuration code
> Exynos: Avoid a divide by zero by specifying a non-zero period
> for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
> driver
>
> Hunter, Jon (4):
> omap2420-h4: Fix DRAM initialisation
> omap2420-h4: Fix booting from NOR flash
> omap2420-h4: Add device tree support
> omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
>
> Javier Martinez Canillas (1):
> i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
> command
>
> Jon Hunter (5):
> omap5912-osk: Fix DRAM initialisation
> omap5912-osk: Fix booting from NOR flash
> omap5912-osk: Fix device initialisation
> omap5912-osk: Increase flash partition for u-boot
> omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
>
> Josh Wu (1):
> logo: update to the new logo for ATMEL
>
> Knut Wohlrab (1):
> imx-common: timer: fix 32-bit overflow
>
> Lars Poeschel (1):
> pcm051: Enable DDR PHY dynamic power down bit
>
> Lokesh Vutla (1):
> arm: omap4: Fix SDRAM AUTO DETECTION
>
> Lubomir Popov (2):
> OMAP: Fix copy-paste bug that did not enable UART4 clock
> OMAP4: Fix bug in omap4460_volts struct
>
> Manfred Huber (1):
> omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
>
> Minkyu Kang (1):
> exynos: change indentation of defines in cpu.h
>
> Nishanth Menon (1):
> omap5: Allow use of a plain text env file
>
> Otavio Salvador (4):
> mx6qsabresd: Document the mapping of USDHC[2-4]
> mx6qsabresd: Fix card detection for invalid card id case
> mx6qsabre{sd,auto}: Add boot mode select
> mx23_olinuxino: Change definitions to use spaces instead of tabs
>
> Padmavathi Venna (4):
> Exynos: Add peripherial id for pwm
> Exynos: clock: Add generic api to get the clk freq
> Exynos: clock: Correct pwm source clk selection
> Exynos: pwm: Use generic api to get pwm clk freq
>
> Przemyslaw Marczak (1):
> spl:falcon:trats: Fix SPL image size computing.
>
> Rajeshwari Shinde (1):
> EXYNOS5: Add L2 Cache Support.
>
> SRICHARAN R (4):
> ARM: OMAP5: Rename omap5_evm to omap5_uevm
> ARM: OMAP5: Set fdt_high to enable booting with Device tree
> ARM: OMAP4/5: Change the default boot command to work with device
> tree ARM: OMAP4/5: Make bootz as the default boot command
>
> Simon Glass (1):
> Exynos: Change get_timer() to work correctly
>
> Stephen Warren (1):
> ARM: bcm2835: fix get_timer() to return ms
>
> Tom Rini (8):
> am335x: Enable MMC1 clock
> doc/feature-removal-schedule.txt: Add
> CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
> checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
> omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
> am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
> am335x: Update timings for the beaglebone again
> omap5_uevm: Correct to 2MiB aligned partitions on eMMC
>
> Vivek Gautam (2):
> SMDK5250: Fix compiler warning for non-dt systems
> spi: exynos: Fix compiler warnings for non-dt systems
>
> .gitignore | 3 +
> MAINTAINERS | 5 +-
> Makefile | 40 +-
> README | 42 +-
> arch/arm/config.mk | 2 -
> arch/arm/cpu/arm1136/config.mk | 7 +
> arch/arm/cpu/arm1136/omap24xx/timer.c | 8 +-
> arch/arm/cpu/arm1136/start.S | 28 +-
> arch/arm/cpu/arm1136/u-boot-spl.lds | 2 +-
> arch/arm/cpu/arm1176/bcm2835/timer.c | 14 +-
> arch/arm/cpu/arm1176/s3c64xx/config.mk | 34 -
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---
> arch/arm/cpu/arm1176/s3c64xx/init.c | 26 -
> arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 -
> arch/arm/cpu/arm1176/s3c64xx/speed.c | 145 ----
> arch/arm/cpu/arm1176/s3c64xx/timer.c | 160 ----
> arch/arm/cpu/arm1176/start.S | 127 +--
> arch/arm/cpu/arm720t/start.S | 26 +-
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 13 +-
> arch/arm/cpu/arm920t/start.S | 28 +-
> arch/arm/cpu/arm925t/start.S | 28 +-
> arch/arm/cpu/arm926ejs/config.mk | 8 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-
> arch/arm/cpu/arm926ejs/mxs/start.S | 4 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 +-
> arch/arm/cpu/arm926ejs/omap/timer.c | 15 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 +-
> arch/arm/cpu/arm926ejs/start.S | 40 +-
> arch/arm/cpu/arm946es/start.S | 28 +-
> arch/arm/cpu/arm_intcm/start.S | 30 +-
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 5 +
> arch/arm/cpu/armv7/am33xx/elm.c | 2 +-
> arch/arm/cpu/armv7/config.mk | 6 +
> arch/arm/cpu/armv7/exynos/clock.c | 167 +++-
> arch/arm/cpu/armv7/exynos/soc.c | 36 +
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 8 +-
> arch/arm/cpu/armv7/mx6/soc.c | 12 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 29 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +-
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/omap3/board.c | 31 +-
> arch/arm/cpu/armv7/omap4/emif.c | 1 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 8 +-
> arch/arm/cpu/armv7/omap5/emif.c | 1 -
> arch/arm/cpu/armv7/s5p-common/pwm.c | 42 +-
> arch/arm/cpu/armv7/s5p-common/timer.c | 117 ++-
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/start.S | 26 +-
> arch/arm/cpu/ixp/start.S | 28 +-
> arch/arm/cpu/ixp/u-boot.lds | 2 +
> arch/arm/cpu/pxa/start.S | 26 +-
> arch/arm/cpu/s3c44b0/start.S | 28 +-
> arch/arm/cpu/sa1100/start.S | 28 +-
> arch/arm/cpu/u-boot-spl.lds | 19 +-
> arch/arm/cpu/u-boot.lds | 4 -
> arch/arm/dts/exynos5250.dtsi | 13 +
> arch/arm/imx-common/Makefile | 18 +
> .../arm/imx-common/cmd_hdmidet.c | 32 +-
> arch/arm/imx-common/timer.c | 26 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 20 +-
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +-
> arch/arm/include/asm/arch-am33xx/spl.h | 8 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-bcm2835/timer.h | 2 +
> arch/arm/include/asm/arch-exynos/clk.h | 15 +
> arch/arm/include/asm/arch-exynos/cpu.h | 10 +-
> arch/arm/include/asm/arch-exynos/dp_info.h | 1 -
> arch/arm/include/asm/arch-exynos/periph.h | 5 +
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 +
> arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 6 +
> arch/arm/include/asm/arch-omap3/omap_gpmc.h | 68 +-
> arch/arm/include/asm/arch-omap3/spl.h | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 1 -
> arch/arm/include/asm/arch-omap4/spl.h | 2 +
> arch/arm/include/asm/arch-omap5/omap.h | 1 -
> arch/arm/include/asm/arch-omap5/spl.h | 2 +
> arch/arm/include/asm/arch-s3c64xx/hardware.h | 63 --
> arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895
> --------------------
> arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --
> arch/arm/include/asm/emif.h | 1 -
> arch/arm/include/asm/mach-types.h | 13 -
> arch/arm/include/asm/omap_gpmc.h | 87 ++
> arch/arm/lib/crt0.S | 52 +-
> board/actux1/u-boot.lds | 3 +
> board/actux2/u-boot.lds | 3 +
> board/actux3/u-boot.lds | 3 +
> board/ait/cam_enc_4xx/u-boot-spl.lds | 4 +-
> board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 4 +-
> board/davinci/da8xxevm/u-boot-spl-hawk.lds | 9 +-
> board/dvlhost/u-boot.lds | 3 +
> board/freescale/mx31ads/u-boot.lds | 18 +-
> board/freescale/mx31pdk/Makefile | 3 +
> board/freescale/mx31pdk/config.mk | 5 -
> board/freescale/mx31pdk/mx31pdk.c | 8 +
> board/freescale/mx53ard/mx53ard.c | 66 ++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +
> board/freescale/mx6qsabrelite/README | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +-
> board/freescale/mx6qsabresd/mx6qsabresd.c | 48 +-
> board/isee/igep00x0/igep00x0.c | 2 +-
> board/karo/tx25/Makefile | 4 +-
> board/karo/tx25/config.mk | 5 -
> board/karo/tx25/tx25.c | 8 +
> board/overo/overo.c | 2 +-
> board/phytec/pcm051/board.c | 3 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 40 +
> board/samsung/smdk5250/clock_init.c | 22 +-
> board/samsung/smdk5250/setup.h | 2 +-
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 4 +-
> board/samsung/smdk5250/smdk5250.c | 19 +-
> board/samsung/smdk6400/.gitignore | 5 -
> board/samsung/smdk6400/Makefile | 48 --
> board/samsung/smdk6400/config.mk | 30 -
> board/samsung/smdk6400/lowlevel_init.S | 323 -------
> board/samsung/smdk6400/smdk6400.c | 134 ---
> board/samsung/smdk6400/smdk6400_nand_spl.c | 37 -
> board/samsung/smdk6400/u-boot-nand.lds | 86 --
> board/samsung/trats/trats.c | 6 +-
> board/samsung/universal_c210/universal.c | 23 +-
> board/ti/am335x/board.c | 2 +-
> board/ti/omap2420h4/config.mk | 4 +-
> board/ti/omap2420h4/mem.c | 13 -
> board/ti/omap2420h4/omap2420h4.c | 24 +-
> board/ti/omap5912osk/config.mk | 12 +-
> board/ti/omap5912osk/lowlevel_init.S | 20 +
> board/ti/omap5912osk/omap5912osk.c | 23 +-
> board/ti/{omap5_evm => omap5_uevm}/Makefile | 0
> board/ti/{omap5_evm => omap5_uevm}/evm.c | 0
> board/ti/{omap5_evm => omap5_uevm}/mux_data.h | 0
> board/vpac270/u-boot-spl.lds | 6 +-
> board/wandboard/Makefile | 29 +
> board/wandboard/README | 40 +
> board/wandboard/wandboard.c | 178 ++++
> boards.cfg | 9 +-
> common/hash.c | 18 +
> config.mk | 7 +
> doc/README.arm-relocation | 14 +-
> doc/README.mx28evk | 18 +
> doc/README.omap3 | 28 +
> doc/README.scrapyard | 1 +
> doc/device-tree-bindings/video/exynos-dp.txt | 69 ++
> doc/device-tree-bindings/video/exynos-fb.txt | 92 ++
> doc/driver-model/UDM-serial.txt | 42 +-
> doc/feature-removal-schedule.txt | 32
> +- .../arm1176/s3c64xx => drivers/crypto}/Makefile | 27 +-
> drivers/crypto/ace_sha.c | 126 +++
> drivers/crypto/ace_sha.h | 325 +++++++
> drivers/mmc/bcm2835_sdhci.c | 5 +-
> drivers/mmc/fsl_esdhc.c | 7 +
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/mxc_nand.c | 260 +++---
> drivers/mtd/nand/mxc_nand.h | 225
> +++++ .../mtd/nand/mxc_nand_spl.c | 130 ++-
> drivers/mtd/nand/ndfc.c | 4 +-
> drivers/mtd/nand/omap_gpmc.c | 424 +++++++---
> drivers/mtd/nand/s3c64xx.c | 295 -------
> drivers/mtd/onenand/onenand_base.c | 4 -
> drivers/mtd/onenand/samsung.c | 60 +-
> drivers/serial/Makefile | 1 -
> drivers/serial/ns16550.c | 18 +-
> drivers/serial/s3c64xx.c | 187 ----
> drivers/serial/serial.c | 2 -
> drivers/spi/exynos_spi.c | 2 +
> drivers/spi/mxc_spi.c | 8 +-
> drivers/usb/host/Makefile | 1 -
> drivers/usb/host/ohci-hcd.c | 1 -
> drivers/usb/musb-new/musb_core.c | 7 +
> drivers/usb/musb-new/musb_uboot.c | 2 +-
> drivers/video/exynos_dp.c | 76 +-
> drivers/video/exynos_dp_lowlevel.c | 69 +-
> drivers/video/exynos_dp_lowlevel.h | 1 +
> drivers/video/exynos_fb.c | 230 ++++-
> drivers/video/exynos_fimd.c | 44 +-
> include/common.h | 7 +-
> include/config_fallbacks.h | 16 +
> include/configs/MPC8313ERDB.h | 2 +-
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 4 +-
> include/configs/da850evm.h | 4 +-
> include/configs/dra7xx_evm.h | 2 +
> include/configs/exynos5250-dt.h | 11 +-
> include/configs/igep00x0.h | 3 -
> include/configs/mx23_olinuxino.h | 162 ++--
> include/configs/mx25pdk.h | 4 +
> include/configs/mx28evk.h | 92 +-
> include/configs/mx31pdk.h | 23 +-
> include/configs/mx53ard.h | 10 +
> include/configs/mx6qsabre_common.h | 2 +
> include/configs/mx6qsabrelite.h | 3 -
> include/configs/omap2420h4.h | 5 +-
> include/configs/omap4_common.h | 22 +-
> include/configs/omap5912osk.h | 15 +-
> include/configs/omap5_common.h | 51 +-
> include/configs/{omap5_evm.h => omap5_uevm.h} | 17 +
> include/configs/rpi_b.h | 2 +-
> include/configs/smdk6400.h | 296 -------
> include/configs/trats.h | 1 +
> include/configs/tricorder.h | 13 +-
> include/configs/tx25.h | 22 +-
> include/configs/wandboard.h | 209 +++++
> include/fdtdec.h | 2 +
> include/fsl_esdhc.h | 1 +
> include/fsl_nfc.h | 170 ----
> include/hw_sha.h | 50 ++
> include/lcd.h | 9 -
> include/onenand_uboot.h | 4 -
> lib/Makefile | 2 +-
> lib/fdtdec.c | 2 +
> mkconfig | 9 -
> nand_spl/board/freescale/mx31pdk/Makefile | 63 --
> nand_spl/board/freescale/mx31pdk/u-boot.lds | 87 --
> nand_spl/board/karo/tx25/Makefile | 84 --
> nand_spl/board/karo/tx25/config.mk | 1 -
> nand_spl/board/karo/tx25/u-boot.lds | 85 --
> nand_spl/board/samsung/smdk6400/Makefile | 117 ---
> nand_spl/board/samsung/smdk6400/config.mk | 40 -
> nand_spl/board/samsung/smdk6400/u-boot.lds | 80 --
> tools/logos/atmel.bmp | Bin 26334 ->
> 15478 bytes tools/scripts/define2mk.sed | 2
> + 223 files changed, 3941 insertions(+), 5319 deletions(-) delete mode
> 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
> arch/arm/cpu/arm1176/s3c64xx/timer.c rename
> drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
> (65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
> delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
> mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
> 100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
> board/freescale/mx31pdk/config.mk delete mode 100644
> board/karo/tx25/config.mk delete mode 100644
> board/samsung/smdk6400/.gitignore delete mode 100644
> board/samsung/smdk6400/Makefile delete mode 100644
> board/samsung/smdk6400/config.mk delete mode 100644
> board/samsung/smdk6400/lowlevel_init.S delete mode 100644
> board/samsung/smdk6400/smdk6400.c delete mode 100644
> board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
> board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
> omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
> omap5_uevm}/mux_data.h (100%) create mode 100644
> board/wandboard/Makefile create mode 100644 board/wandboard/README
> create mode 100644 board/wandboard/wandboard.c
> create mode 100644 doc/device-tree-bindings/video/exynos-dp.txt
> create mode 100644 doc/device-tree-bindings/video/exynos-fb.txt
> rename {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%)
> create mode 100644 drivers/crypto/ace_sha.c
> create mode 100644 drivers/crypto/ace_sha.h
> create mode 100644 drivers/mtd/nand/mxc_nand.h
> rename nand_spl/nand_boot_fsl_nfc.c => drivers/mtd/nand/mxc_nand_spl.c
> (65%) delete mode 100644 drivers/mtd/nand/s3c64xx.c
> delete mode 100644 drivers/serial/s3c64xx.c
> rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%)
> delete mode 100644 include/configs/smdk6400.h
> create mode 100644 include/configs/wandboard.h
> delete mode 100644 include/fsl_nfc.h
> create mode 100644 include/hw_sha.h
> delete mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
> delete mode 100644 nand_spl/board/freescale/mx31pdk/u-boot.lds
> delete mode 100644 nand_spl/board/karo/tx25/Makefile
> delete mode 100644 nand_spl/board/karo/tx25/config.mk
> delete mode 100644 nand_spl/board/karo/tx25/u-boot.lds
> delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile
> delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk
> delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds
>
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
You have forgotten to apply this one:
http://patchwork.ozlabs.org/patch/233964/
Best regards,
Beno?t
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-04-10 23:12 UTC (permalink / raw)
To: u-boot
Hello,
The following changes since commit
009d75ccc11d27b9a083375a88bb93cb746b4800:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
18:50:01 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to aad17a2f2bdd0b456522e24a90a0f8b8d8adb1f9:
ARM: fix CONFIG_SPL_MAX_SIZE semantics (2013-04-11 00:18:03 +0200)
*** NOTE *** there should be a single, and trivial, merge conflict on
file drivers/video/exynos_fb.c.
----------------------------------------------------------------
Abbas Raza (1):
mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a
board
Ajay Kumar (13):
video: exynos_fb: Remove callbacks from the driver
video: exynos_dp: Remove callbacks from the driver
video: exynos_fb: Make fimd_ctrl global
EXYNOS: FDT: Add compatible strings for FIMD
video: exynos_fb: add DT support for FIMD driver
EXYNOS5: Add device node for FIMD
SMDK5250: Add device node for FIMD
video: exynos_dp: Make dp_regs global
EXYNOS5: FDT: Add compatible strings for FIMD
video: exynos_dp: Add function to parse DP DT node
EXYNOS5: Add device node for DP
SMDK5250: Add device node for DP
SMDK5250: Use statically defined structures only in non DT case
Akshay Saraswat (8):
Exynos: clock: Fix a bug in PLL lock check condition
Exynos: Add hardware accelerated SHA256 and SHA1
Exynos: config: Enable ACE HW for SHA 256 for Exynos
gen: Add sha h/w acceleration to hash
Exynos: config: Enable hash command
Exynos5: clock: Fix a typo bug in exynos clock init
Exynos5: config: enable time command
Exynos: pwm: Remove dead code of function exynos5_get_pwm_clk
Albert ARIBAUD (7):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
ARM: fix CONFIG_SPL_MAX_SIZE semantics
Alexandre Pereira da Silva (1):
mx23_olinuxino: Fix netboot console
Andreas Bie?mann (6):
omap3/cpu.h: add BCH support
asm/omap_gpmc.h: consolidate common defines
omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
omap_gpmc: change nandecc command
omap_gpmc: add support for hw assisted BCH8
tricorder: enable hw assisted BCH8 in SPL and u-boot
Beno?t Th?baudeau (29):
mx25pdk: Enable imxdi RTC
nand: mxc: Prepare to add support for i.MX5
nand: mxc: Add support for i.MX5
imx: mx5: lowlevel_init: Simplify code
imx: mx53ard: Add support for NAND Flash
nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
nand: mxc: Use appropriate page number in syndrome functions
arm: start.S: Fix _TEXT_BASE for SPL
arm: relocate_code() is no longer noreturn
arm1136: Remove redundant relocate_code() return
arm: relocate_code(): Remove useless relocation offset computation
arm: relocate_code(): Use __image_copy_end for end of relocation
arm: crt0.S: Remove bogus .globl
autoconfig.mk: Make it possible to define configs from other
configs Makefile: Change CONFIG_SPL_PAD_TO to image offset
imx: Fix automatic make targets for imx images
nand: mxc: Switch NAND SPL to generic SPL
arm926ejs: Remove deprecated and now unused NAND SPL
arm: Remove unused relocate_code() parameters
Makefile: Move SHELL setup to config.mk
.gitignore: Add /SPL
imx: Add u-boot-with-spl.imx make target
imx: Add u-boot-with-nand-spl.imx make target
arm: Remove support for smdk6400
Revert "mkconfig: start deprecating Makefile config targets"
arm: Remove support for unused s3c64xx
arm: Remove deprecated and now unused NAND SPL
arm1176: Remove unused MMU setup from start.S
arm: Make all linker scripts compatible with per-symbol sections
Bin Liu (2):
musb: am335x: disable bulk split-combine feature
musb: set MUSB speed based on CONFIG
Che-Liang Chiou (1):
Exynos: Add timer_get_us function
Dirk Behme (1):
spi: mxc_spi: Fix ECSPI reset handling
Eric Nelson (2):
i.MX6: Add hdmidet command to detect attached HDMI monitor
i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT
Fabio Estevam (13):
mxs: spl_mem_init: Align DDR2 init with FSL bootlets source
configs: mx28evk: Use single-line comments
mx28evk: Disable CONFIG_CMD_I2C
Add initial support for Wandboard dual lite and solo.
mx28evk: Introduce a new target for saving env vars to NAND
mx6qsabrelite: README: No need to pass 'u-boot.imx'
mx6: Fix get_board_rev() for the mx6 solo case
wandboard: Remove duplicate 'mmc dev'
mx6qsabrelite: Remove duplicate 'mmc dev'
wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
mtd: nand: mxc_nand: Fix is_16bit_nand()
mx31pdk: Remove watchdog support
Gabe Black (3):
Exynos: pwm: Fix two bugs in the exynos pwm configuration code
Exynos: Avoid a divide by zero by specifying a non-zero period
for pwm 4 Exynos: Tidy up the pwm_config function in the exynos pwm
driver
Hunter, Jon (4):
omap2420-h4: Fix DRAM initialisation
omap2420-h4: Fix booting from NOR flash
omap2420-h4: Add device tree support
omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
Javier Martinez Canillas (1):
i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe
command
Jon Hunter (5):
omap5912-osk: Fix DRAM initialisation
omap5912-osk: Fix booting from NOR flash
omap5912-osk: Fix device initialisation
omap5912-osk: Increase flash partition for u-boot
omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
Josh Wu (1):
logo: update to the new logo for ATMEL
Knut Wohlrab (1):
imx-common: timer: fix 32-bit overflow
Lars Poeschel (1):
pcm051: Enable DDR PHY dynamic power down bit
Lokesh Vutla (1):
arm: omap4: Fix SDRAM AUTO DETECTION
Lubomir Popov (2):
OMAP: Fix copy-paste bug that did not enable UART4 clock
OMAP4: Fix bug in omap4460_volts struct
Manfred Huber (1):
omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Minkyu Kang (1):
exynos: change indentation of defines in cpu.h
Nishanth Menon (1):
omap5: Allow use of a plain text env file
Otavio Salvador (4):
mx6qsabresd: Document the mapping of USDHC[2-4]
mx6qsabresd: Fix card detection for invalid card id case
mx6qsabre{sd,auto}: Add boot mode select
mx23_olinuxino: Change definitions to use spaces instead of tabs
Padmavathi Venna (4):
Exynos: Add peripherial id for pwm
Exynos: clock: Add generic api to get the clk freq
Exynos: clock: Correct pwm source clk selection
Exynos: pwm: Use generic api to get pwm clk freq
Przemyslaw Marczak (1):
spl:falcon:trats: Fix SPL image size computing.
Rajeshwari Shinde (1):
EXYNOS5: Add L2 Cache Support.
SRICHARAN R (4):
ARM: OMAP5: Rename omap5_evm to omap5_uevm
ARM: OMAP5: Set fdt_high to enable booting with Device tree
ARM: OMAP4/5: Change the default boot command to work with device
tree ARM: OMAP4/5: Make bootz as the default boot command
Simon Glass (1):
Exynos: Change get_timer() to work correctly
Stephen Warren (1):
ARM: bcm2835: fix get_timer() to return ms
Tom Rini (8):
am335x: Enable MMC1 clock
doc/feature-removal-schedule.txt: Add
CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL OMAP3/4/5/AM33xx: Correct logic for
checking FAT or RAW MMC omap5_uevm.h: Move uEVM-specific choices to
omap5_uevm.h omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
am335x: Update timings for the beaglebone again
omap5_uevm: Correct to 2MiB aligned partitions on eMMC
Vivek Gautam (2):
SMDK5250: Fix compiler warning for non-dt systems
spi: exynos: Fix compiler warnings for non-dt systems
.gitignore | 3 +
MAINTAINERS | 5 +-
Makefile | 40 +-
README | 42 +-
arch/arm/config.mk | 2 -
arch/arm/cpu/arm1136/config.mk | 7 +
arch/arm/cpu/arm1136/omap24xx/timer.c | 8 +-
arch/arm/cpu/arm1136/start.S | 28 +-
arch/arm/cpu/arm1136/u-boot-spl.lds | 2 +-
arch/arm/cpu/arm1176/bcm2835/timer.c | 14 +-
arch/arm/cpu/arm1176/s3c64xx/config.mk | 34 -
arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---
arch/arm/cpu/arm1176/s3c64xx/init.c | 26 -
arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 -
arch/arm/cpu/arm1176/s3c64xx/speed.c | 145 ----
arch/arm/cpu/arm1176/s3c64xx/timer.c | 160 ----
arch/arm/cpu/arm1176/start.S | 127 +--
arch/arm/cpu/arm720t/start.S | 26 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 13 +-
arch/arm/cpu/arm920t/start.S | 28 +-
arch/arm/cpu/arm925t/start.S | 28 +-
arch/arm/cpu/arm926ejs/config.mk | 8 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-
arch/arm/cpu/arm926ejs/mxs/start.S | 4 +
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 6 +-
arch/arm/cpu/arm926ejs/omap/timer.c | 15 +-
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 6 +-
arch/arm/cpu/arm926ejs/start.S | 40 +-
arch/arm/cpu/arm946es/start.S | 28 +-
arch/arm/cpu/arm_intcm/start.S | 30 +-
arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 5 +
arch/arm/cpu/armv7/am33xx/elm.c | 2 +-
arch/arm/cpu/armv7/config.mk | 6 +
arch/arm/cpu/armv7/exynos/clock.c | 167 +++-
arch/arm/cpu/armv7/exynos/soc.c | 36 +
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 8 +-
arch/arm/cpu/armv7/mx6/soc.c | 12 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 29 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +-
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 31 +-
arch/arm/cpu/armv7/omap4/emif.c | 1 -
arch/arm/cpu/armv7/omap4/hw_data.c | 8 +-
arch/arm/cpu/armv7/omap5/emif.c | 1 -
arch/arm/cpu/armv7/s5p-common/pwm.c | 42 +-
arch/arm/cpu/armv7/s5p-common/timer.c | 117 ++-
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/start.S | 26 +-
arch/arm/cpu/ixp/start.S | 28 +-
arch/arm/cpu/ixp/u-boot.lds | 2 +
arch/arm/cpu/pxa/start.S | 26 +-
arch/arm/cpu/s3c44b0/start.S | 28 +-
arch/arm/cpu/sa1100/start.S | 28 +-
arch/arm/cpu/u-boot-spl.lds | 19 +-
arch/arm/cpu/u-boot.lds | 4 -
arch/arm/dts/exynos5250.dtsi | 13 +
arch/arm/imx-common/Makefile | 18 +
.../arm/imx-common/cmd_hdmidet.c | 32 +-
arch/arm/imx-common/timer.c | 26 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 20 +-
arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +-
arch/arm/include/asm/arch-am33xx/spl.h | 8 +
arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +-
arch/arm/include/asm/arch-bcm2835/timer.h | 2 +
arch/arm/include/asm/arch-exynos/clk.h | 15 +
arch/arm/include/asm/arch-exynos/cpu.h | 10 +-
arch/arm/include/asm/arch-exynos/dp_info.h | 1 -
arch/arm/include/asm/arch-exynos/periph.h | 5 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 +
arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +-
arch/arm/include/asm/arch-omap3/cpu.h | 6 +
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 68 +-
arch/arm/include/asm/arch-omap3/spl.h | 3 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 1 -
arch/arm/include/asm/arch-omap4/spl.h | 2 +
arch/arm/include/asm/arch-omap5/omap.h | 1 -
arch/arm/include/asm/arch-omap5/spl.h | 2 +
arch/arm/include/asm/arch-s3c64xx/hardware.h | 63 --
arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895
--------------------
arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --
arch/arm/include/asm/emif.h | 1 -
arch/arm/include/asm/mach-types.h | 13 -
arch/arm/include/asm/omap_gpmc.h | 87 ++
arch/arm/lib/crt0.S | 52 +-
board/actux1/u-boot.lds | 3 +
board/actux2/u-boot.lds | 3 +
board/actux3/u-boot.lds | 3 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 4 +-
board/boundary/nitrogen6x/nitrogen6x.c | 8 +-
board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 4 +-
board/davinci/da8xxevm/u-boot-spl-hawk.lds | 9 +-
board/dvlhost/u-boot.lds | 3 +
board/freescale/mx31ads/u-boot.lds | 18 +-
board/freescale/mx31pdk/Makefile | 3 +
board/freescale/mx31pdk/config.mk | 5 -
board/freescale/mx31pdk/mx31pdk.c | 8 +
board/freescale/mx53ard/mx53ard.c | 66 ++
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +
board/freescale/mx6qsabrelite/README | 4 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +-
board/freescale/mx6qsabresd/mx6qsabresd.c | 48 +-
board/isee/igep00x0/igep00x0.c | 2 +-
board/karo/tx25/Makefile | 4 +-
board/karo/tx25/config.mk | 5 -
board/karo/tx25/tx25.c | 8 +
board/overo/overo.c | 2 +-
board/phytec/pcm051/board.c | 3 +-
board/samsung/dts/exynos5250-smdk5250.dts | 40 +
board/samsung/smdk5250/clock_init.c | 22 +-
board/samsung/smdk5250/setup.h | 2 +-
board/samsung/smdk5250/smdk5250-uboot-spl.lds | 4 +-
board/samsung/smdk5250/smdk5250.c | 19 +-
board/samsung/smdk6400/.gitignore | 5 -
board/samsung/smdk6400/Makefile | 48 --
board/samsung/smdk6400/config.mk | 30 -
board/samsung/smdk6400/lowlevel_init.S | 323 -------
board/samsung/smdk6400/smdk6400.c | 134 ---
board/samsung/smdk6400/smdk6400_nand_spl.c | 37 -
board/samsung/smdk6400/u-boot-nand.lds | 86 --
board/samsung/trats/trats.c | 6 +-
board/samsung/universal_c210/universal.c | 23 +-
board/ti/am335x/board.c | 2 +-
board/ti/omap2420h4/config.mk | 4 +-
board/ti/omap2420h4/mem.c | 13 -
board/ti/omap2420h4/omap2420h4.c | 24 +-
board/ti/omap5912osk/config.mk | 12 +-
board/ti/omap5912osk/lowlevel_init.S | 20 +
board/ti/omap5912osk/omap5912osk.c | 23 +-
board/ti/{omap5_evm => omap5_uevm}/Makefile | 0
board/ti/{omap5_evm => omap5_uevm}/evm.c | 0
board/ti/{omap5_evm => omap5_uevm}/mux_data.h | 0
board/vpac270/u-boot-spl.lds | 6 +-
board/wandboard/Makefile | 29 +
board/wandboard/README | 40 +
board/wandboard/wandboard.c | 178 ++++
boards.cfg | 9 +-
common/hash.c | 18 +
config.mk | 7 +
doc/README.arm-relocation | 14 +-
doc/README.mx28evk | 18 +
doc/README.omap3 | 28 +
doc/README.scrapyard | 1 +
doc/device-tree-bindings/video/exynos-dp.txt | 69 ++
doc/device-tree-bindings/video/exynos-fb.txt | 92 ++
doc/driver-model/UDM-serial.txt | 42 +-
doc/feature-removal-schedule.txt | 32
+- .../arm1176/s3c64xx => drivers/crypto}/Makefile | 27 +-
drivers/crypto/ace_sha.c | 126 +++
drivers/crypto/ace_sha.h | 325 +++++++
drivers/mmc/bcm2835_sdhci.c | 5 +-
drivers/mmc/fsl_esdhc.c | 7 +
drivers/mtd/nand/Makefile | 2 +-
drivers/mtd/nand/mxc_nand.c | 260 +++---
drivers/mtd/nand/mxc_nand.h | 225
+++++ .../mtd/nand/mxc_nand_spl.c | 130 ++-
drivers/mtd/nand/ndfc.c | 4 +-
drivers/mtd/nand/omap_gpmc.c | 424 +++++++---
drivers/mtd/nand/s3c64xx.c | 295 -------
drivers/mtd/onenand/onenand_base.c | 4 -
drivers/mtd/onenand/samsung.c | 60 +-
drivers/serial/Makefile | 1 -
drivers/serial/ns16550.c | 18 +-
drivers/serial/s3c64xx.c | 187 ----
drivers/serial/serial.c | 2 -
drivers/spi/exynos_spi.c | 2 +
drivers/spi/mxc_spi.c | 8 +-
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ohci-hcd.c | 1 -
drivers/usb/musb-new/musb_core.c | 7 +
drivers/usb/musb-new/musb_uboot.c | 2 +-
drivers/video/exynos_dp.c | 76 +-
drivers/video/exynos_dp_lowlevel.c | 69 +-
drivers/video/exynos_dp_lowlevel.h | 1 +
drivers/video/exynos_fb.c | 230 ++++-
drivers/video/exynos_fimd.c | 44 +-
include/common.h | 7 +-
include/config_fallbacks.h | 16 +
include/configs/MPC8313ERDB.h | 2 +-
include/configs/am335x_evm.h | 1 +
include/configs/cam_enc_4xx.h | 4 +-
include/configs/da850evm.h | 4 +-
include/configs/dra7xx_evm.h | 2 +
include/configs/exynos5250-dt.h | 11 +-
include/configs/igep00x0.h | 3 -
include/configs/mx23_olinuxino.h | 162 ++--
include/configs/mx25pdk.h | 4 +
include/configs/mx28evk.h | 92 +-
include/configs/mx31pdk.h | 23 +-
include/configs/mx53ard.h | 10 +
include/configs/mx6qsabre_common.h | 2 +
include/configs/mx6qsabrelite.h | 3 -
include/configs/omap2420h4.h | 5 +-
include/configs/omap4_common.h | 22 +-
include/configs/omap5912osk.h | 15 +-
include/configs/omap5_common.h | 51 +-
include/configs/{omap5_evm.h => omap5_uevm.h} | 17 +
include/configs/rpi_b.h | 2 +-
include/configs/smdk6400.h | 296 -------
include/configs/trats.h | 1 +
include/configs/tricorder.h | 13 +-
include/configs/tx25.h | 22 +-
include/configs/wandboard.h | 209 +++++
include/fdtdec.h | 2 +
include/fsl_esdhc.h | 1 +
include/fsl_nfc.h | 170 ----
include/hw_sha.h | 50 ++
include/lcd.h | 9 -
include/onenand_uboot.h | 4 -
lib/Makefile | 2 +-
lib/fdtdec.c | 2 +
mkconfig | 9 -
nand_spl/board/freescale/mx31pdk/Makefile | 63 --
nand_spl/board/freescale/mx31pdk/u-boot.lds | 87 --
nand_spl/board/karo/tx25/Makefile | 84 --
nand_spl/board/karo/tx25/config.mk | 1 -
nand_spl/board/karo/tx25/u-boot.lds | 85 --
nand_spl/board/samsung/smdk6400/Makefile | 117 ---
nand_spl/board/samsung/smdk6400/config.mk | 40 -
nand_spl/board/samsung/smdk6400/u-boot.lds | 80 --
tools/logos/atmel.bmp | Bin 26334 ->
15478 bytes tools/scripts/define2mk.sed | 2
+ 223 files changed, 3941 insertions(+), 5319 deletions(-) delete mode
100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644
arch/arm/cpu/arm1176/s3c64xx/timer.c rename
drivers/usb/host/s3c64xx-hcd.c => arch/arm/imx-common/cmd_hdmidet.c
(65%) delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h
delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete
mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h create mode
100644 arch/arm/include/asm/omap_gpmc.h delete mode 100644
board/freescale/mx31pdk/config.mk delete mode 100644
board/karo/tx25/config.mk delete mode 100644
board/samsung/smdk6400/.gitignore delete mode 100644
board/samsung/smdk6400/Makefile delete mode 100644
board/samsung/smdk6400/config.mk delete mode 100644
board/samsung/smdk6400/lowlevel_init.S delete mode 100644
board/samsung/smdk6400/smdk6400.c delete mode 100644
board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644
board/samsung/smdk6400/u-boot-nand.lds rename board/ti/{omap5_evm =>
omap5_uevm}/Makefile (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/evm.c (100%) rename board/ti/{omap5_evm =>
omap5_uevm}/mux_data.h (100%) create mode 100644
board/wandboard/Makefile create mode 100644 board/wandboard/README
create mode 100644 board/wandboard/wandboard.c
create mode 100644 doc/device-tree-bindings/video/exynos-dp.txt
create mode 100644 doc/device-tree-bindings/video/exynos-fb.txt
rename {arch/arm/cpu/arm1176/s3c64xx => drivers/crypto}/Makefile (69%)
create mode 100644 drivers/crypto/ace_sha.c
create mode 100644 drivers/crypto/ace_sha.h
create mode 100644 drivers/mtd/nand/mxc_nand.h
rename nand_spl/nand_boot_fsl_nfc.c => drivers/mtd/nand/mxc_nand_spl.c
(65%) delete mode 100644 drivers/mtd/nand/s3c64xx.c
delete mode 100644 drivers/serial/s3c64xx.c
rename include/configs/{omap5_evm.h => omap5_uevm.h} (71%)
delete mode 100644 include/configs/smdk6400.h
create mode 100644 include/configs/wandboard.h
delete mode 100644 include/fsl_nfc.h
create mode 100644 include/hw_sha.h
delete mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
delete mode 100644 nand_spl/board/freescale/mx31pdk/u-boot.lds
delete mode 100644 nand_spl/board/karo/tx25/Makefile
delete mode 100644 nand_spl/board/karo/tx25/config.mk
delete mode 100644 nand_spl/board/karo/tx25/u-boot.lds
delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile
delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk
delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-28 20:06 Albert ARIBAUD
@ 2013-03-29 0:01 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-03-29 0:01 UTC (permalink / raw)
To: u-boot
On Thu, Mar 28, 2013 at 09:06:28PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> Here is a pull request for u-boot-arm/master -- note it should appear
> trivial and result in a fast-forward as ARM ToT is actually a merge of
> mainline ToT so as to resolve minor manual merge issues.
>
> The following changes since commit
> 417c55803118eb8e350d5ab8ba6583fb39f4e2e3:
>
> apx4devkit: change maintainer (2013-03-27 15:30:11 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 009d75ccc11d27b9a083375a88bb93cb746b4800:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
> 18:50:01 +0100)
>
> ----------------------------------------------------------------
>
> Akshay Saraswat (8):
> Exynos5: TMU: Add driver for Thermal Management Unit
> Exynos5: FDT: Add TMU device node values
> Exynos5: TMU: Add TMU init and status check
> Exynos5: Config: Enable support for Exynos TMU driver
> TMU: Add TMU support in dtt command
> Exynos5: Config: Enable dtt command for TMU
> Exynos5: TMU: Add hardware tripping
> Exynos5: FDT: Add a H/W-trip member to TMU node
>
> Albert ARIBAUD (4):
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Allen Martin (13):
> tegra: remove support for UART SPI switch
> tegra: spi: rename tegra SPI drivers
> tegra: spi: remove non fdt support
> tegra: spi: pull register structs out of headers
> tegra20: spi: move fdt probe to spi_init
> spi: add common fdt SPI driver interface
> sf: winbond: add W25Q32DW
> tegra114: fdt: add compatible string for tegra114 SPI ctrl
> tegra114: fdt: add apbdma block
> tegra114: fdt: add SPI blocks
> tegra114: dalmore: fdt: enable dalmore SPI controller
> tegra114: add SPI driver
> tegra114: dalmore: config: enable SPI
>
> Enric Balletbo i Serra (2):
> ARM: AM33XX: Fix typo that causes an AM duplication in CPU name.
> igep00x0: Enable CONFIG_CMD_BOOTZ
>
> Koen Kooi (3):
> am335x_evm: add support for BeagleBone Black DT name
> am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to
> env am335x_evm: Add more variables and switch to DT booting.
>
> Mark Jackson (2):
> Allow AM335x MPU core clock speed to be specified in the board
> config file Initialise correct GPMC WAITx irq for AM33xx
>
> Matt Porter (9):
> am33xx: convert defines from am33xx-specific to generic names
> am33xx: refactor emif4/ddr to support multiple EMIF instances
> am33xx: refactor am33xx clocks and add ti814x support
> am33xx: refactor am33xx mux support and add ti814x support
> am33xx: add ti814x specific register definitions
> am33xx: add dmm support to emif4 library
> am33xx: support ti814x mmc reference clock
> ns16550: enable quirks for ti814x
> ti814x_evm: add ti814x evm board support
>
> Nikita Kiryanov (1):
> cm-t35: add support for loading splash image from NAND
>
> Peter Korsgaard (2):
> mmc: mmc_getcd/getwp: use sensible defaults
> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio
> could be used
>
> R Sricharan (2):
> ARM: mmu: Introduce weak dram_bank_setup function
> ARM: mmu: Set domain permissions to client access
>
> Rajeshwari Shinde (11):
> EXYNOS5: Add function to setup set ps hold
> SMDK5250: Add PMIC voltage settings
> EXYNOS5: Add function to enable XXTI clock source
> Sound: MAX98095: Add the driver for codec
> Sound: Support for MAX98095 codec in driver
> EXYNOS5: GPIO to enable MAX98095
> EXYNOS5: FDT: Add compatible strings for MAX98095
> config: Snow: Enable MAX98095 codec
> SMDK5250: FDT: Retrieve board model via DT
> EXYNOS5: Add initial DTS file for Snow.
> EXYNOS5: Snow: Add a configuration file
>
> Simon Glass (1):
> EXYNOS: Correct ordering of SPL machine_params
>
> Stephen Warren (9):
> ARM: bcm2835: add mailbox driver
> ARM: rpi_b: use bcm2835 mbox driver to get memory size
> lcd: calculate line_length after lcd_ctrl_init()
> ARM: rpi_b: disable rpi_b dcache explicitly
> video: add a driver for the bcm2835
> mmc: add bcm2835 driver
> ARM: rpi_b: enable SD controller, add related env/cmds
> ARM: implement erratum 716044 workaround
> ARM: tegra: enable workaround for ARM erratum 716044
>
> Steve Kipisz (1):
> am33xx:ddr:Fix config_sdram to work for all DDR
>
> Tom Rini (3):
> am33xx: Add required includes to some omap/am33xx code
> am335x_evm: Add better timings for the new BeagleBoard DDR3 part
> arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP*
> platforms
>
> Tom Warren (4):
> Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore
> for now) Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
> Tegra114: MMC: Add SD bus power-rail init routine
> Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
> boards
>
> Vaibhav Hiremath (1):
> am335x: Enable DDR PHY dynamic power down bit for DDR3 boards
>
> Vincent Stehl?? (2):
> ARM: cache: declare set_section_dcache
> armv7: do not relocate _start twice
>
> ??ukasz Majewski (1):
> mmc:sdhci:fix: Change default interrupts enabled at SDHCI
> initialization
>
> MAINTAINERS | 8 +
> Makefile | 2 +-
> README | 5 +
> arch/arm/config.mk | 2 +-
> arch/arm/cpu/arm1176/bcm2835/Makefile | 2 +-
> arch/arm/cpu/arm1176/bcm2835/mbox.c | 164 ++++++
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/am33xx/Makefile | 3 +-
> arch/arm/cpu/armv7/am33xx/board.c | 4 +-
> .../cpu/armv7/am33xx/{clock.c => clock_am33xx.c} | 33 +-
> arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 406
> +++++++++++++++ arch/arm/cpu/armv7/am33xx/ddr.c |
> 104 ++-- arch/arm/cpu/armv7/am33xx/emif4.c | 57 +-
> arch/arm/cpu/armv7/am33xx/mem.c | 2 +-
> arch/arm/cpu/armv7/am33xx/sys_info.c | 5 +-
> arch/arm/cpu/armv7/cache_v7.c | 3 +
> arch/arm/cpu/armv7/exynos/power.c | 45 ++
> arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 35 ++
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 1 +
> arch/arm/cpu/armv7/omap-common/timer.c | 1 +
> arch/arm/cpu/armv7/start.S | 7 +-
> arch/arm/dts/exynos5250.dtsi | 5 +
> arch/arm/dts/tegra114.dtsi | 141 +++++
> arch/arm/include/asm/arch-am33xx/clock.h | 2 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 36 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 11 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 75 ++-
> arch/arm/include/asm/arch-am33xx/hardware.h | 40 +-
> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 54 ++
> arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 53 ++
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 5 +
> arch/arm/include/asm/arch-am33xx/mux.h | 235 +--------
> arch/arm/include/asm/arch-am33xx/mux_am33xx.h | 247 +++++++++
> arch/arm/include/asm/arch-am33xx/mux_ti814x.h | 311 +++++++++++
> arch/arm/include/asm/arch-am33xx/omap.h | 5 +
> arch/arm/include/asm/arch-am33xx/spl.h | 5 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +
> arch/arm/include/asm/arch-bcm2835/mbox.h | 433
> +++++++++++++++ arch/arm/include/asm/arch-bcm2835/sdhci.h |
> 24 + arch/arm/include/asm/arch-exynos/power.h | 24 +
> arch/arm/include/asm/arch-exynos/spl.h | 3 +-
> arch/arm/include/asm/arch-exynos/tmu.h | 58 +++
> arch/arm/include/asm/arch-tegra/board.h | 3 +-
> arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 ---
> arch/arm/include/asm/arch-tegra/tegra_spi.h | 75 ---
> arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 6 +
> arch/arm/include/asm/arch-tegra114/tegra114_spi.h | 41 ++
> arch/arm/include/asm/arch-tegra20/tegra20_sflash.h | 41 ++
> arch/arm/include/asm/arch-tegra20/tegra20_slink.h | 41 ++
> arch/arm/include/asm/cache.h | 2 +
> arch/arm/include/asm/system.h | 14 +
> arch/arm/lib/cache-cp15.c | 11 +-
> board/cm_t35/cm_t35.c | 61 +++
> board/nvidia/common/board.c | 5 +-
> board/nvidia/common/common.mk | 1 -
> board/nvidia/common/uart-spi-switch.c | 125 -----
> board/nvidia/dalmore/dalmore.c | 66 +++
> board/nvidia/dalmore/pinmux-config-dalmore.h | 6 +
> board/nvidia/dts/tegra114-dalmore.dts | 18 +
> board/nvidia/seaboard/seaboard.c | 2 +-
> board/phytec/pcm051/board.c | 8 +-
> board/raspberrypi/rpi_b/rpi_b.c | 47 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 13 +
> board/samsung/dts/exynos5250-snow.dts | 58 +++
> board/samsung/smdk5250/smdk5250.c | 178 ++++++-
> board/ti/am335x/board.c | 57 +-
> board/ti/ti814x/Makefile | 46 ++
> board/ti/ti814x/evm.c | 198 +++++++
> board/ti/ti814x/evm.h | 7 +
> board/ti/ti814x/mux.c | 51 ++
> boards.cfg | 2 +
> common/cmd_dtt.c | 32 +-
> common/lcd.c | 4 +-
> doc/device-tree-bindings/exynos/tmu.txt | 44 ++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/bcm2835_sdhci.c | 189 +++++++
> drivers/mmc/mmc.c | 16 +-
> drivers/mmc/omap_hsmmc.c | 8 +-
> drivers/mmc/sdhci.c | 8 +-
> drivers/mtd/nand/omap_gpmc.c | 1 +
> drivers/mtd/spi/winbond.c | 5 +
> drivers/net/cpsw.c | 1 +
> drivers/power/Makefile | 1 +
> drivers/power/exynos-tmu.c | 319 ++++++++++++
> drivers/serial/ns16550.c | 5 +-
> drivers/sound/Makefile | 1 +
> drivers/sound/max98095.c | 550
> ++++++++++++++++++++
> drivers/sound/max98095.h | 311 +++++++++++
> drivers/sound/sound.c | 9 +-
> drivers/spi/Makefile | 6 +-
> drivers/spi/fdt_spi.c | 186 +++++++
> drivers/spi/tegra114_spi.c | 405
> ++++++++++++++ drivers/spi/{tegra_spi.c => tegra20_sflash.c} |
> 217 ++++---- drivers/spi/{tegra_slink.c => tegra20_slink.c} | 128
> +++-- drivers/video/Makefile | 1 +
> drivers/video/bcm2835.c | 127 +++++
> include/configs/am335x_evm.h | 28 +-
> include/configs/cardhu.h | 2 +-
> include/configs/cm_t35.h | 4 +
> include/configs/dalmore.h | 23 +-
> include/configs/exynos5250-dt.h | 6 +
> include/configs/igep00x0.h | 3 +-
> include/configs/pcm051.h | 3 +-
> include/configs/rpi_b.h | 79
> +++ .../uart-spi-switch.h => include/configs/snow.h | 35 +-
> include/configs/tegra-common-post.h | 4 +
> include/configs/tegra20-common.h | 1 +
> include/configs/ti814x_evm.h | 221 ++++++++
> include/configs/trimslice.h | 2 +-
> include/fdtdec.h | 3 +
> include/power/max77686_pmic.h | 32 ++
> include/sound.h | 1 +
> include/tmu.h | 46 ++
> lib/fdtdec.c | 3 +
> spl/Makefile | 2 +- 116 files
> changed, 6120 insertions(+), 882 deletions(-) create mode 100644
> arch/arm/cpu/arm1176/bcm2835/mbox.c rename
> arch/arm/cpu/armv7/am33xx/{clock.c => clock_am33xx.c} (91%) create
> mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti814x.c create mode
> 100644 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/mux_am33xx.h create mode
> 100644 arch/arm/include/asm/arch-am33xx/mux_ti814x.h create mode
> 100644 arch/arm/include/asm/arch-bcm2835/mbox.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/sdhci.h create mode 100644
> arch/arm/include/asm/arch-exynos/tmu.h delete mode 100644
> arch/arm/include/asm/arch-tegra/tegra_slink.h delete mode 100644
> arch/arm/include/asm/arch-tegra/tegra_spi.h create mode 100644
> arch/arm/include/asm/arch-tegra114/tegra114_spi.h create mode 100644
> arch/arm/include/asm/arch-tegra20/tegra20_sflash.h create mode 100644
> arch/arm/include/asm/arch-tegra20/tegra20_slink.h delete mode 100644
> board/nvidia/common/uart-spi-switch.c create mode 100644
> board/samsung/dts/exynos5250-snow.dts create mode 100644
> board/ti/ti814x/Makefile create mode 100644 board/ti/ti814x/evm.c
> create mode 100644 board/ti/ti814x/evm.h
> create mode 100644 board/ti/ti814x/mux.c
> create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
> create mode 100644 drivers/mmc/bcm2835_sdhci.c
> create mode 100644 drivers/power/exynos-tmu.c
> create mode 100644 drivers/sound/max98095.c
> create mode 100644 drivers/sound/max98095.h
> create mode 100644 drivers/spi/fdt_spi.c
> create mode 100644 drivers/spi/tegra114_spi.c
> rename drivers/spi/{tegra_spi.c => tegra20_sflash.c} (56%)
> rename drivers/spi/{tegra_slink.c => tegra20_slink.c} (72%)
> create mode 100644 drivers/video/bcm2835.c
> rename arch/arm/include/asm/arch-tegra20/uart-spi-switch.h =>
> include/configs/snow.h (50%) create mode 100644
> include/configs/ti814x_evm.h create mode 100644 include/tmu.h
>
> Amicalement,
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130328/c8b41188/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-03-28 20:06 UTC (permalink / raw)
To: u-boot
Hello Tom,
Here is a pull request for u-boot-arm/master -- note it should appear
trivial and result in a fast-forward as ARM ToT is actually a merge of
mainline ToT so as to resolve minor manual merge issues.
The following changes since commit
417c55803118eb8e350d5ab8ba6583fb39f4e2e3:
apx4devkit: change maintainer (2013-03-27 15:30:11 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 009d75ccc11d27b9a083375a88bb93cb746b4800:
Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-03-28
18:50:01 +0100)
----------------------------------------------------------------
Akshay Saraswat (8):
Exynos5: TMU: Add driver for Thermal Management Unit
Exynos5: FDT: Add TMU device node values
Exynos5: TMU: Add TMU init and status check
Exynos5: Config: Enable support for Exynos TMU driver
TMU: Add TMU support in dtt command
Exynos5: Config: Enable dtt command for TMU
Exynos5: TMU: Add hardware tripping
Exynos5: FDT: Add a H/W-trip member to TMU node
Albert ARIBAUD (4):
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Allen Martin (13):
tegra: remove support for UART SPI switch
tegra: spi: rename tegra SPI drivers
tegra: spi: remove non fdt support
tegra: spi: pull register structs out of headers
tegra20: spi: move fdt probe to spi_init
spi: add common fdt SPI driver interface
sf: winbond: add W25Q32DW
tegra114: fdt: add compatible string for tegra114 SPI ctrl
tegra114: fdt: add apbdma block
tegra114: fdt: add SPI blocks
tegra114: dalmore: fdt: enable dalmore SPI controller
tegra114: add SPI driver
tegra114: dalmore: config: enable SPI
Enric Balletbo i Serra (2):
ARM: AM33XX: Fix typo that causes an AM duplication in CPU name.
igep00x0: Enable CONFIG_CMD_BOOTZ
Koen Kooi (3):
am335x_evm: add support for BeagleBone Black DT name
am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to
env am335x_evm: Add more variables and switch to DT booting.
Mark Jackson (2):
Allow AM335x MPU core clock speed to be specified in the board
config file Initialise correct GPMC WAITx irq for AM33xx
Matt Porter (9):
am33xx: convert defines from am33xx-specific to generic names
am33xx: refactor emif4/ddr to support multiple EMIF instances
am33xx: refactor am33xx clocks and add ti814x support
am33xx: refactor am33xx mux support and add ti814x support
am33xx: add ti814x specific register definitions
am33xx: add dmm support to emif4 library
am33xx: support ti814x mmc reference clock
ns16550: enable quirks for ti814x
ti814x_evm: add ti814x evm board support
Nikita Kiryanov (1):
cm-t35: add support for loading splash image from NAND
Peter Korsgaard (2):
mmc: mmc_getcd/getwp: use sensible defaults
mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio
could be used
R Sricharan (2):
ARM: mmu: Introduce weak dram_bank_setup function
ARM: mmu: Set domain permissions to client access
Rajeshwari Shinde (11):
EXYNOS5: Add function to setup set ps hold
SMDK5250: Add PMIC voltage settings
EXYNOS5: Add function to enable XXTI clock source
Sound: MAX98095: Add the driver for codec
Sound: Support for MAX98095 codec in driver
EXYNOS5: GPIO to enable MAX98095
EXYNOS5: FDT: Add compatible strings for MAX98095
config: Snow: Enable MAX98095 codec
SMDK5250: FDT: Retrieve board model via DT
EXYNOS5: Add initial DTS file for Snow.
EXYNOS5: Snow: Add a configuration file
Simon Glass (1):
EXYNOS: Correct ordering of SPL machine_params
Stephen Warren (9):
ARM: bcm2835: add mailbox driver
ARM: rpi_b: use bcm2835 mbox driver to get memory size
lcd: calculate line_length after lcd_ctrl_init()
ARM: rpi_b: disable rpi_b dcache explicitly
video: add a driver for the bcm2835
mmc: add bcm2835 driver
ARM: rpi_b: enable SD controller, add related env/cmds
ARM: implement erratum 716044 workaround
ARM: tegra: enable workaround for ARM erratum 716044
Steve Kipisz (1):
am33xx:ddr:Fix config_sdram to work for all DDR
Tom Rini (3):
am33xx: Add required includes to some omap/am33xx code
am335x_evm: Add better timings for the new BeagleBoard DDR3 part
arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP*
platforms
Tom Warren (4):
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore
for now) Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
Tegra114: MMC: Add SD bus power-rail init routine
Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
boards
Vaibhav Hiremath (1):
am335x: Enable DDR PHY dynamic power down bit for DDR3 boards
Vincent Stehl? (2):
ARM: cache: declare set_section_dcache
armv7: do not relocate _start twice
?ukasz Majewski (1):
mmc:sdhci:fix: Change default interrupts enabled at SDHCI
initialization
MAINTAINERS | 8 +
Makefile | 2 +-
README | 5 +
arch/arm/config.mk | 2 +-
arch/arm/cpu/arm1176/bcm2835/Makefile | 2 +-
arch/arm/cpu/arm1176/bcm2835/mbox.c | 164 ++++++
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/am33xx/Makefile | 3 +-
arch/arm/cpu/armv7/am33xx/board.c | 4 +-
.../cpu/armv7/am33xx/{clock.c => clock_am33xx.c} | 33 +-
arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 406
+++++++++++++++ arch/arm/cpu/armv7/am33xx/ddr.c |
104 ++-- arch/arm/cpu/armv7/am33xx/emif4.c | 57 +-
arch/arm/cpu/armv7/am33xx/mem.c | 2 +-
arch/arm/cpu/armv7/am33xx/sys_info.c | 5 +-
arch/arm/cpu/armv7/cache_v7.c | 3 +
arch/arm/cpu/armv7/exynos/power.c | 45 ++
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 35 ++
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 1 +
arch/arm/cpu/armv7/omap-common/timer.c | 1 +
arch/arm/cpu/armv7/start.S | 7 +-
arch/arm/dts/exynos5250.dtsi | 5 +
arch/arm/dts/tegra114.dtsi | 141 +++++
arch/arm/include/asm/arch-am33xx/clock.h | 2 +-
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 36 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 11 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 75 ++-
arch/arm/include/asm/arch-am33xx/hardware.h | 40 +-
arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 54 ++
arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 53 ++
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 5 +
arch/arm/include/asm/arch-am33xx/mux.h | 235 +--------
arch/arm/include/asm/arch-am33xx/mux_am33xx.h | 247 +++++++++
arch/arm/include/asm/arch-am33xx/mux_ti814x.h | 311 +++++++++++
arch/arm/include/asm/arch-am33xx/omap.h | 5 +
arch/arm/include/asm/arch-am33xx/spl.h | 5 +
arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +
arch/arm/include/asm/arch-bcm2835/mbox.h | 433
+++++++++++++++ arch/arm/include/asm/arch-bcm2835/sdhci.h |
24 + arch/arm/include/asm/arch-exynos/power.h | 24 +
arch/arm/include/asm/arch-exynos/spl.h | 3 +-
arch/arm/include/asm/arch-exynos/tmu.h | 58 +++
arch/arm/include/asm/arch-tegra/board.h | 3 +-
arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 ---
arch/arm/include/asm/arch-tegra/tegra_spi.h | 75 ---
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 6 +
arch/arm/include/asm/arch-tegra114/tegra114_spi.h | 41 ++
arch/arm/include/asm/arch-tegra20/tegra20_sflash.h | 41 ++
arch/arm/include/asm/arch-tegra20/tegra20_slink.h | 41 ++
arch/arm/include/asm/cache.h | 2 +
arch/arm/include/asm/system.h | 14 +
arch/arm/lib/cache-cp15.c | 11 +-
board/cm_t35/cm_t35.c | 61 +++
board/nvidia/common/board.c | 5 +-
board/nvidia/common/common.mk | 1 -
board/nvidia/common/uart-spi-switch.c | 125 -----
board/nvidia/dalmore/dalmore.c | 66 +++
board/nvidia/dalmore/pinmux-config-dalmore.h | 6 +
board/nvidia/dts/tegra114-dalmore.dts | 18 +
board/nvidia/seaboard/seaboard.c | 2 +-
board/phytec/pcm051/board.c | 8 +-
board/raspberrypi/rpi_b/rpi_b.c | 47 +-
board/samsung/dts/exynos5250-smdk5250.dts | 13 +
board/samsung/dts/exynos5250-snow.dts | 58 +++
board/samsung/smdk5250/smdk5250.c | 178 ++++++-
board/ti/am335x/board.c | 57 +-
board/ti/ti814x/Makefile | 46 ++
board/ti/ti814x/evm.c | 198 +++++++
board/ti/ti814x/evm.h | 7 +
board/ti/ti814x/mux.c | 51 ++
boards.cfg | 2 +
common/cmd_dtt.c | 32 +-
common/lcd.c | 4 +-
doc/device-tree-bindings/exynos/tmu.txt | 44 ++
drivers/mmc/Makefile | 1 +
drivers/mmc/bcm2835_sdhci.c | 189 +++++++
drivers/mmc/mmc.c | 16 +-
drivers/mmc/omap_hsmmc.c | 8 +-
drivers/mmc/sdhci.c | 8 +-
drivers/mtd/nand/omap_gpmc.c | 1 +
drivers/mtd/spi/winbond.c | 5 +
drivers/net/cpsw.c | 1 +
drivers/power/Makefile | 1 +
drivers/power/exynos-tmu.c | 319 ++++++++++++
drivers/serial/ns16550.c | 5 +-
drivers/sound/Makefile | 1 +
drivers/sound/max98095.c | 550
++++++++++++++++++++
drivers/sound/max98095.h | 311 +++++++++++
drivers/sound/sound.c | 9 +-
drivers/spi/Makefile | 6 +-
drivers/spi/fdt_spi.c | 186 +++++++
drivers/spi/tegra114_spi.c | 405
++++++++++++++ drivers/spi/{tegra_spi.c => tegra20_sflash.c} |
217 ++++---- drivers/spi/{tegra_slink.c => tegra20_slink.c} | 128
+++-- drivers/video/Makefile | 1 +
drivers/video/bcm2835.c | 127 +++++
include/configs/am335x_evm.h | 28 +-
include/configs/cardhu.h | 2 +-
include/configs/cm_t35.h | 4 +
include/configs/dalmore.h | 23 +-
include/configs/exynos5250-dt.h | 6 +
include/configs/igep00x0.h | 3 +-
include/configs/pcm051.h | 3 +-
include/configs/rpi_b.h | 79
+++ .../uart-spi-switch.h => include/configs/snow.h | 35 +-
include/configs/tegra-common-post.h | 4 +
include/configs/tegra20-common.h | 1 +
include/configs/ti814x_evm.h | 221 ++++++++
include/configs/trimslice.h | 2 +-
include/fdtdec.h | 3 +
include/power/max77686_pmic.h | 32 ++
include/sound.h | 1 +
include/tmu.h | 46 ++
lib/fdtdec.c | 3 +
spl/Makefile | 2 +- 116 files
changed, 6120 insertions(+), 882 deletions(-) create mode 100644
arch/arm/cpu/arm1176/bcm2835/mbox.c rename
arch/arm/cpu/armv7/am33xx/{clock.c => clock_am33xx.c} (91%) create
mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti814x.c create mode
100644 arch/arm/include/asm/arch-am33xx/hardware_am33xx.h create mode
100644 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h create mode
100644 arch/arm/include/asm/arch-am33xx/mux_am33xx.h create mode
100644 arch/arm/include/asm/arch-am33xx/mux_ti814x.h create mode
100644 arch/arm/include/asm/arch-bcm2835/mbox.h create mode 100644
arch/arm/include/asm/arch-bcm2835/sdhci.h create mode 100644
arch/arm/include/asm/arch-exynos/tmu.h delete mode 100644
arch/arm/include/asm/arch-tegra/tegra_slink.h delete mode 100644
arch/arm/include/asm/arch-tegra/tegra_spi.h create mode 100644
arch/arm/include/asm/arch-tegra114/tegra114_spi.h create mode 100644
arch/arm/include/asm/arch-tegra20/tegra20_sflash.h create mode 100644
arch/arm/include/asm/arch-tegra20/tegra20_slink.h delete mode 100644
board/nvidia/common/uart-spi-switch.c create mode 100644
board/samsung/dts/exynos5250-snow.dts create mode 100644
board/ti/ti814x/Makefile create mode 100644 board/ti/ti814x/evm.c
create mode 100644 board/ti/ti814x/evm.h
create mode 100644 board/ti/ti814x/mux.c
create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
create mode 100644 drivers/mmc/bcm2835_sdhci.c
create mode 100644 drivers/power/exynos-tmu.c
create mode 100644 drivers/sound/max98095.c
create mode 100644 drivers/sound/max98095.h
create mode 100644 drivers/spi/fdt_spi.c
create mode 100644 drivers/spi/tegra114_spi.c
rename drivers/spi/{tegra_spi.c => tegra20_sflash.c} (56%)
rename drivers/spi/{tegra_slink.c => tegra20_slink.c} (72%)
create mode 100644 drivers/video/bcm2835.c
rename arch/arm/include/asm/arch-tegra20/uart-spi-switch.h =>
include/configs/snow.h (50%) create mode 100644
include/configs/ti814x_evm.h create mode 100644 include/tmu.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-18 17:43 ` Albert ARIBAUD
@ 2013-03-18 18:38 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-03-18 18:38 UTC (permalink / raw)
To: u-boot
On Mon, Mar 18, 2013 at 06:43:00PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> On Mon, 18 Mar 2013 13:06:06 -0400, Tom Rini <trini@ti.com> wrote:
>
> > I've merged, but not pushed this, with the following merge commit (I
> > couldn't get a nice pretty print like last time):
> >
> > To try and explain this since diff-diffs are funny:
> > - Consolidate around using __bss_end (so in a few new files, and a lot
> > of changed files, add __bss_end not __bssend__ or similar).
> > - Add hashes for PCIPPC2 / PCIPPC6 in scrapyard.
> > - In tegra20, both CONFIG_SYS_GENERIC_BOARD and CONFIG_BOUNCE_BUFFER are
> > set.
> >
> > commit cf0d1242c87217ba0ce5ecb2f87dfcd1b40b7892
> > Merge: b5bec88 b27673c
> > Author: Tom Rini <trini@ti.com>
> > Date: Mon Mar 18 12:31:00 2013 -0400
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-arm
> >
> > Albert's rework of the linker scripts conflicted with Simon's making
> > everyone use __bss_end. We also had a minor conflict over
> > README.scrapyard being added to in mainline and enhanced in
> > u-boot-arm/master with IDs for when stuff was removed.
>
> This is ever so slightly incorrect regarding scrapyard: IDs are present
> also in mainline. What ARM changes is, columns are aligned and the
> order of headers is fixed wrt actual content.
>
> Apart from that, all seems ok to me.
>
> > Conflicts:
> > arch/arm/cpu/ixp/u-boot.lds
> > arch/arm/cpu/u-boot.lds
> > arch/arm/lib/Makefile
> > board/actux1/u-boot.lds
> > board/actux2/u-boot.lds
> > board/actux3/u-boot.lds
> > board/dvlhost/u-boot.lds
> > board/freescale/mx31ads/u-boot.lds
> > doc/README.scrapyard
> > include/configs/tegra-common.h
> >
> > Build tested for all of ARM and run-time tested on am335x_evm.
> >
> > Signed-off-by: Tom Rini <trini@ti.com>
> >
> > diff --cc arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> > index 0000000,69f6d48..b6a929f
> > mode 000000,100644..100644
> > --- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> > +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> > @@@ -1,0 -1,67 +1,67 @@@
> > + /*
> > + * (C) Copyright 2002
> > + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> > + *
> > + * (C) Copyright 2010
> > + * Texas Instruments, <www.ti.com>
> > + * Aneesh V <aneesh@ti.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > + MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
> > + LENGTH = CONFIG_SPL_MAX_SIZE }
> > + MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
> > + LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
> > +
> > + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> > + OUTPUT_ARCH(arm)
> > + ENTRY(_start)
> > + SECTIONS
> > + {
> > + .text :
> > + {
> > + __start = .;
> > + arch/arm/cpu/armv7/start.o (.text)
> > + *(.text*)
> > + } >.sram
> > +
> > + . = ALIGN(4);
> > + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
> > +
> > + . = ALIGN(4);
> > + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
> > +
> > + .u_boot_list : {
> > + KEEP(*(SORT(.u_boot_list*)));
> > + } >.sram
> > +
> > + . = ALIGN(4);
> > + __image_copy_end = .;
> > + _end = .;
> > +
> > + .bss :
> > + {
> > + . = ALIGN(4);
> > + __bss_start = .;
> > + *(.bss*)
> > + . = ALIGN(4);
> > - __bss_end__ = .;
> > ++ __bss_end = .;
> > + } >.sdram
> > + }
> > diff --cc arch/arm/cpu/ixp/u-boot.lds
> > index 2c823e1,5e66dd1..8345b55
> > --- a/arch/arm/cpu/ixp/u-boot.lds
> > +++ b/arch/arm/cpu/ixp/u-boot.lds
> > @@@ -67,11 -67,17 +67,17 @@@ SECTION
> >
> > _end = .;
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - __bss_end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > + }
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > }
> >
> > /DISCARD/ : { *(.dynstr*) }
> > diff --cc arch/arm/cpu/u-boot-spl.lds
> > index 0000000,8321afb..3c0d99c
> > mode 000000,100644..100644
> > --- a/arch/arm/cpu/u-boot-spl.lds
> > +++ b/arch/arm/cpu/u-boot-spl.lds
> > @@@ -1,0 -1,93 +1,93 @@@
> > + /*
> > + * Copyright (c) 2004-2008 Texas Instruments
> > + *
> > + * (C) Copyright 2002
> > + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> > + OUTPUT_ARCH(arm)
> > + ENTRY(_start)
> > + SECTIONS
> > + {
> > + . = 0x00000000;
> > +
> > + . = ALIGN(4);
> > + .text :
> > + {
> > + __image_copy_start = .;
> > + CPUDIR/start.o (.text*)
> > + *(.text*)
> > + }
> > +
> > + . = ALIGN(4);
> > + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> > +
> > + . = ALIGN(4);
> > + .data : {
> > + *(.data*)
> > + }
> > +
> > + . = ALIGN(4);
> > +
> > + . = .;
> > +
> > + __image_copy_end = .;
> > +
> > + .rel.dyn : {
> > + __rel_dyn_start = .;
> > + *(.rel*)
> > + __rel_dyn_end = .;
> > + }
> > +
> > + .dynsym : {
> > + __dynsym_start = .;
> > + *(.dynsym)
> > + }
> > +
> > + _end = .;
> > +
> > + /*
> > + * Deprecated: this MMU section is used by pxa at present but
> > + * should not be used by new boards/CPUs.
> > + */
> > + . = ALIGN(4096);
> > + .mmutable : {
> > + *(.mmutable)
> > + }
> > +
> > + .bss __rel_dyn_start (OVERLAY) : {
> > + __bss_start = .;
> > + *(.bss*)
> > + . = ALIGN(4);
> > - __bss_end__ = .;
> > ++ __bss_end = .;
> > + }
> > +
> > + /DISCARD/ : { *(.dynstr*) }
> > + /DISCARD/ : { *(.dynamic*) }
> > + /DISCARD/ : { *(.plt*) }
> > + /DISCARD/ : { *(.interp*) }
> > + /DISCARD/ : { *(.gnu*) }
> > + }
> > +
> > + #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
> > -ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
> > ++ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
> > + #endif
> > diff --cc arch/arm/cpu/u-boot.lds
> > index b337e7b,d4ad352..3a1083d
> > --- a/arch/arm/cpu/u-boot.lds
> > +++ b/arch/arm/cpu/u-boot.lds
> > @@@ -81,11 -81,17 +81,18 @@@ SECTION
> > *(.mmutable)
> > }
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - __bss_end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > + }
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > }
> >
> > /DISCARD/ : { *(.dynstr*) }
> > diff --cc arch/arm/lib/Makefile
> > index 24c7e7a,11c2674..6ae161a
> > --- a/arch/arm/lib/Makefile
> > +++ b/arch/arm/lib/Makefile
> > @@@ -39,10 -39,8 +39,11 @@@ GLCOBJS += div0.
> > SOBJS-y += crt0.o
> >
> > ifndef CONFIG_SPL_BUILD
> > -COBJS-y += bss.o
> > +ifndef CONFIG_SYS_GENERIC_BOARD
> > COBJS-y += board.o
> > +endif
> > ++COBJS-y += bss.o
> > +
> > COBJS-y += bootm.o
> > COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
> > SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
> > diff --cc arch/arm/lib/bss.c
> > index 0000000,7c0b154..99eda59
> > mode 000000,100644..100644
> > --- a/arch/arm/lib/bss.c
> > +++ b/arch/arm/lib/bss.c
> > @@@ -1,0 -1,39 +1,39 @@@
> > + /*
> > + * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > + /**
> > + * These two symbols are declared in a C file so that the linker
> > + * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
> > + * it would use if the symbols were defined in the linker file.
> > + * Using only R_ARM_RELATIVE relocation ensures that references to
> > + * the symbols are correct after as well as before relocation.
> > + *
> > + * We need a 0-byte-size type for these symbols, and the compiler
> > + * does not allow defining objects of C type 'void'. Using an empty
> > + * struct is allowed by the compiler, but causes gcc versions 4.4 and
> > + * below to complain about aliasing. Therefore we use the next best
> > + * thing: zero-sized arrays, which are both 0-byte-size and exempt from
> > + * aliasing warnings.
> > + */
> > +
> > + char __bss_start[0] __attribute__((used, section(".__bss_start")));
> > -char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
> > ++char __bss_end[0] __attribute__((used, section(".__bss_end")));
> > diff --cc board/actux1/u-boot.lds
> > index a0d217b,7cf5b46..c76728a
> > --- a/board/actux1/u-boot.lds
> > +++ b/board/actux1/u-boot.lds
> > @@@ -72,13 -72,21 +72,21 @@@ SECTION
> > *(.dynsym)
> > }
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + _end = .;
> > +
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - _end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > }
> > - __bss_end =.;
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > + }
> > +
> > /DISCARD/ : { *(.dynstr*) }
> > /DISCARD/ : { *(.dynamic*) }
> > /DISCARD/ : { *(.plt*) }
> > diff --cc board/actux2/u-boot.lds
> > index da2b4e2,e9b5547..984f70e
> > --- a/board/actux2/u-boot.lds
> > +++ b/board/actux2/u-boot.lds
> > @@@ -72,13 -72,21 +72,21 @@@ SECTION
> > *(.dynsym)
> > }
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + _end = .;
> > +
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - _end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > }
> > - __bss_end =.;
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > + }
> > +
> > /DISCARD/ : { *(.dynstr*) }
> > /DISCARD/ : { *(.dynamic*) }
> > /DISCARD/ : { *(.plt*) }
> > diff --cc board/actux3/u-boot.lds
> > index f922033,b79ea3c..fc48cf0
> > --- a/board/actux3/u-boot.lds
> > +++ b/board/actux3/u-boot.lds
> > @@@ -72,13 -72,21 +72,21 @@@ SECTION
> > *(.dynsym)
> > }
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + _end = .;
> > +
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - _end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > }
> > - __bss_end =.;
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > + }
> > +
> > /DISCARD/ : { *(.dynstr*) }
> > /DISCARD/ : { *(.dynamic*) }
> > /DISCARD/ : { *(.plt*) }
> > diff --cc board/dvlhost/u-boot.lds
> > index ed91003,eb83b6f..b13d3e1
> > --- a/board/dvlhost/u-boot.lds
> > +++ b/board/dvlhost/u-boot.lds
> > @@@ -72,13 -72,21 +72,21 @@@ SECTION
> > *(.dynsym)
> > }
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > + _end = .;
> > +
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > *(.bss*)
> > . = ALIGN(4);
> > - _end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > }
> > - __bss_end =.;
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > + }
> > +
> > /DISCARD/ : { *(.dynstr*) }
> > /DISCARD/ : { *(.dynamic*) }
> > /DISCARD/ : { *(.plt*) }
> > diff --cc board/freescale/mx31ads/u-boot.lds
> > index 4d1858b,2d08fea..264c4e8
> > --- a/board/freescale/mx31ads/u-boot.lds
> > +++ b/board/freescale/mx31ads/u-boot.lds
> > @@@ -80,11 -80,17 +80,17 @@@ SECTION
> >
> > _end = .;
> >
> > - .bss __rel_dyn_start (OVERLAY) : {
> > - __bss_start = .;
> > - *(.bss)
> > + .bss_start __rel_dyn_start (OVERLAY) : {
> > + KEEP(*(.__bss_start));
> > + }
> > +
> > + .bss __bss_start (OVERLAY) : {
> > + *(.bss*)
> > . = ALIGN(4);
> > - __bss_end = .;
> > - ___bssend___ = .;
> > ++ __bss_end = .;
> > + }
> > - .bss_end ___bssend___ (OVERLAY) : {
> > - KEEP(*(.__bss_end__));
> > ++ .bss_end __bss_end (OVERLAY) : {
> > ++ KEEP(*(__bss_end));
> > }
> >
> > /DISCARD/ : { *(.bss*) }
> > diff --cc doc/README.scrapyard
> > index 7d73ea0,e9ca96c..189b883
> > --- a/doc/README.scrapyard
> > +++ b/doc/README.scrapyard
> > @@@ -9,85 -9,84 +9,86 @@@ maintain a list of such former fellows
> > easily if here is something they might want to dig for...
> >
> >
> > - Board Arch CPU removed Commit last known maintainer/contact
> > - =============================================================================
> > - AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
> > - c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
> > - ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
> > - IAD210 powerpc mpc860 - - -
> > - LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
> > - SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
> > - SX1 arm arm925t - -
> > - TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
> > - apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
> > - tb0229 mips mips32 3f3110d 2011-12-12
> > - rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
> > - OXC powerpc MPC8240 309a292 2011-12-07
> > - BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
> > - xm250 arm pxa c746cdd 2011-25-11
> > - pleb2 arm pxa b185a1c 2011-25-11
> > - cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
> > - cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
> > - mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
> > - ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
> > - ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
> > - zylonite arm pxa b66521a 2011-09-05
> > - shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
> > - modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
> > - lpc2292sodimm arm arm720t d1a067a 2011-09-05
> > - lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
> > - impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
> > - gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
> > - evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
> > - ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
> > - dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
> > - SMN42 arm arm720t 6aac646 2011-09-05
> > - at91rm9200dk arm arm920t 1c85752 2011-07-17
> > - m501sk arm arm920t b1a2bd4 2011-07-17
> > - kb9202 arm arm920t 5bd3814 2011-07-17
> > - csb637 arm arm920t d14af08 2011-07-17
> > - cmc_pu2 arm arm920t 37a9b4d 2011-07-17
> > - at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
> > - voiceblue arm arm925t 1b793a4 2011-07-17
> > - smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
> > - sbc2410x arm arm920t 1f7f0ed 2011-07-17
> > - netstar arm arm925t 6ea2405 2011-07-17
> > - mx1fs2 arm arm920t 6962419 2011-07-17
> > - lpd7a404 arm lh7a40x 957731e 2011-07-17
> > - edb9301 arm arm920t 716f7ad 2011-07-17
> > - edb9302 arm arm920t 716f7ad 2011-07-17
> > - edb9302a arm arm920t 716f7ad 2011-07-17
> > - edb9307 arm arm920t 716f7ad 2011-07-17
> > - edb9307a arm arm920t 716f7ad 2011-07-17
> > - edb9312 arm arm920t 716f7ad 2011-07-17
> > - edb9315 arm arm920t 716f7ad 2011-07-17
> > - edb9315a arm arm920t 716f7ad 2011-07-17
> > - B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
> > - armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
> > - assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
> > - trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
> > - xsengine ARM PXA2xx 4262a7c 2010-10-20
> > - wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
> > - delta ARM PXA2xx 75e2035 2010-10-20
> > - mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
> > - barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
> > - ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
> > - VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
> > - NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> > - CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> > - logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
> > - CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
> > - PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
> > - spieval powerpc MPC5200 69434e4 2010-09-19
> > - smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
> > - HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
> > - GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
> > - AmigaOneG3SE 953b7e6 2010-06-23
> > - suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
> > - XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
> > - MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
> > - adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
> > - R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
> > - CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> > - PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
> > + Board Arch CPU Commit Removed Last known maintainer/contact
> > + =================================================================================================
> > + ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
> > + AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> > + c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> > + ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> > + IAD210 powerpc mpc860 1b0757e 2012-10-28 -
> > + LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> > + SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
> > + SX1 arm arm925t 53c4154 2012-10-26
> > + TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
> > + apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
> > + tb0229 mips mips32 3f3110d 2011-12-12
> > + rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
> > + OXC powerpc MPC8240 309a292 2011-12-07
> > + BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
> > + xm250 arm pxa c746cdd 2011-25-11
> > + pleb2 arm pxa b185a1c 2011-25-11
> > + cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
> > + cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
> > + mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
> > + ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
> > + ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
> > + zylonite arm pxa b66521a 2011-09-05
> > + shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
> > + modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
> > + lpc2292sodimm arm arm720t d1a067a 2011-09-05
> > + lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
> > + impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
> > + gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
> > + evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
> > + ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
> > + dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
> > + SMN42 arm arm720t 6aac646 2011-09-05
> > + at91rm9200dk arm arm920t 1c85752 2011-07-17
> > + m501sk arm arm920t b1a2bd4 2011-07-17
> > + kb9202 arm arm920t 5bd3814 2011-07-17
> > + csb637 arm arm920t d14af08 2011-07-17
> > + cmc_pu2 arm arm920t 37a9b4d 2011-07-17
> > + at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
> > + voiceblue arm arm925t 1b793a4 2011-07-17
> > + smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
> > + sbc2410x arm arm920t 1f7f0ed 2011-07-17
> > + netstar arm arm925t 6ea2405 2011-07-17
> > + mx1fs2 arm arm920t 6962419 2011-07-17
> > + lpd7a404 arm lh7a40x 957731e 2011-07-17
> > + edb9301 arm arm920t 716f7ad 2011-07-17
> > + edb9302 arm arm920t 716f7ad 2011-07-17
> > + edb9302a arm arm920t 716f7ad 2011-07-17
> > + edb9307 arm arm920t 716f7ad 2011-07-17
> > + edb9307a arm arm920t 716f7ad 2011-07-17
> > + edb9312 arm arm920t 716f7ad 2011-07-17
> > + edb9315 arm arm920t 716f7ad 2011-07-17
> > + edb9315a arm arm920t 716f7ad 2011-07-17
> > + B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
> > + armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
> > + assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
> > + trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
> > + xsengine ARM PXA2xx 4262a7c 2010-10-20
> > + wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
> > + delta ARM PXA2xx 75e2035 2010-10-20
> > + mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
> > + barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
> > + ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
> > + VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
> > + NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> > + CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> > + logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
> > + CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
> > + PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
> > + spieval powerpc MPC5200 69434e4 2010-09-19
> > + smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
> > + HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
> > + GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
> > + AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
> > + suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
> > + XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
> > + MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
> > + adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
> > + R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
> > + CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> > ++PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
> > +PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
> > diff --cc include/configs/tegra-common.h
> > index 88acccf,4cc35e5..036ded0
> > --- a/include/configs/tegra-common.h
> > +++ b/include/configs/tegra-common.h
> > @@@ -157,6 -167,7 +167,8 @@@
> > #define CONFIG_SPL_SERIAL_SUPPORT
> > #define CONFIG_SPL_GPIO_SUPPORT
> >
> > +#define CONFIG_SYS_GENERIC_BOARD
> > + /* Misc utility code */
> > + #define CONFIG_BOUNCE_BUFFER
> >
> > #endif /* _TEGRA_COMMON_H_ */
Thanks for the clarification, I've reworded the commit message slightly
and pushed.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130318/a2e70ce6/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-18 17:06 ` Tom Rini
@ 2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-03-18 17:43 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Mon, 18 Mar 2013 13:06:06 -0400, Tom Rini <trini@ti.com> wrote:
> I've merged, but not pushed this, with the following merge commit (I
> couldn't get a nice pretty print like last time):
>
> To try and explain this since diff-diffs are funny:
> - Consolidate around using __bss_end (so in a few new files, and a lot
> of changed files, add __bss_end not __bssend__ or similar).
> - Add hashes for PCIPPC2 / PCIPPC6 in scrapyard.
> - In tegra20, both CONFIG_SYS_GENERIC_BOARD and CONFIG_BOUNCE_BUFFER are
> set.
>
> commit cf0d1242c87217ba0ce5ecb2f87dfcd1b40b7892
> Merge: b5bec88 b27673c
> Author: Tom Rini <trini@ti.com>
> Date: Mon Mar 18 12:31:00 2013 -0400
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> Albert's rework of the linker scripts conflicted with Simon's making
> everyone use __bss_end. We also had a minor conflict over
> README.scrapyard being added to in mainline and enhanced in
> u-boot-arm/master with IDs for when stuff was removed.
This is ever so slightly incorrect regarding scrapyard: IDs are present
also in mainline. What ARM changes is, columns are aligned and the
order of headers is fixed wrt actual content.
Apart from that, all seems ok to me.
> Conflicts:
> arch/arm/cpu/ixp/u-boot.lds
> arch/arm/cpu/u-boot.lds
> arch/arm/lib/Makefile
> board/actux1/u-boot.lds
> board/actux2/u-boot.lds
> board/actux3/u-boot.lds
> board/dvlhost/u-boot.lds
> board/freescale/mx31ads/u-boot.lds
> doc/README.scrapyard
> include/configs/tegra-common.h
>
> Build tested for all of ARM and run-time tested on am335x_evm.
>
> Signed-off-by: Tom Rini <trini@ti.com>
>
> diff --cc arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> index 0000000,69f6d48..b6a929f
> mode 000000,100644..100644
> --- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> @@@ -1,0 -1,67 +1,67 @@@
> + /*
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> + *
> + * (C) Copyright 2010
> + * Texas Instruments, <www.ti.com>
> + * Aneesh V <aneesh@ti.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> + MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
> + LENGTH = CONFIG_SPL_MAX_SIZE }
> + MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
> + LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
> +
> + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> + OUTPUT_ARCH(arm)
> + ENTRY(_start)
> + SECTIONS
> + {
> + .text :
> + {
> + __start = .;
> + arch/arm/cpu/armv7/start.o (.text)
> + *(.text*)
> + } >.sram
> +
> + . = ALIGN(4);
> + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
> +
> + . = ALIGN(4);
> + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
> +
> + .u_boot_list : {
> + KEEP(*(SORT(.u_boot_list*)));
> + } >.sram
> +
> + . = ALIGN(4);
> + __image_copy_end = .;
> + _end = .;
> +
> + .bss :
> + {
> + . = ALIGN(4);
> + __bss_start = .;
> + *(.bss*)
> + . = ALIGN(4);
> - __bss_end__ = .;
> ++ __bss_end = .;
> + } >.sdram
> + }
> diff --cc arch/arm/cpu/ixp/u-boot.lds
> index 2c823e1,5e66dd1..8345b55
> --- a/arch/arm/cpu/ixp/u-boot.lds
> +++ b/arch/arm/cpu/ixp/u-boot.lds
> @@@ -67,11 -67,17 +67,17 @@@ SECTION
>
> _end = .;
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - __bss_end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> + }
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> }
>
> /DISCARD/ : { *(.dynstr*) }
> diff --cc arch/arm/cpu/u-boot-spl.lds
> index 0000000,8321afb..3c0d99c
> mode 000000,100644..100644
> --- a/arch/arm/cpu/u-boot-spl.lds
> +++ b/arch/arm/cpu/u-boot-spl.lds
> @@@ -1,0 -1,93 +1,93 @@@
> + /*
> + * Copyright (c) 2004-2008 Texas Instruments
> + *
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> + OUTPUT_ARCH(arm)
> + ENTRY(_start)
> + SECTIONS
> + {
> + . = 0x00000000;
> +
> + . = ALIGN(4);
> + .text :
> + {
> + __image_copy_start = .;
> + CPUDIR/start.o (.text*)
> + *(.text*)
> + }
> +
> + . = ALIGN(4);
> + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> +
> + . = ALIGN(4);
> + .data : {
> + *(.data*)
> + }
> +
> + . = ALIGN(4);
> +
> + . = .;
> +
> + __image_copy_end = .;
> +
> + .rel.dyn : {
> + __rel_dyn_start = .;
> + *(.rel*)
> + __rel_dyn_end = .;
> + }
> +
> + .dynsym : {
> + __dynsym_start = .;
> + *(.dynsym)
> + }
> +
> + _end = .;
> +
> + /*
> + * Deprecated: this MMU section is used by pxa at present but
> + * should not be used by new boards/CPUs.
> + */
> + . = ALIGN(4096);
> + .mmutable : {
> + *(.mmutable)
> + }
> +
> + .bss __rel_dyn_start (OVERLAY) : {
> + __bss_start = .;
> + *(.bss*)
> + . = ALIGN(4);
> - __bss_end__ = .;
> ++ __bss_end = .;
> + }
> +
> + /DISCARD/ : { *(.dynstr*) }
> + /DISCARD/ : { *(.dynamic*) }
> + /DISCARD/ : { *(.plt*) }
> + /DISCARD/ : { *(.interp*) }
> + /DISCARD/ : { *(.gnu*) }
> + }
> +
> + #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
> -ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
> ++ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
> + #endif
> diff --cc arch/arm/cpu/u-boot.lds
> index b337e7b,d4ad352..3a1083d
> --- a/arch/arm/cpu/u-boot.lds
> +++ b/arch/arm/cpu/u-boot.lds
> @@@ -81,11 -81,17 +81,18 @@@ SECTION
> *(.mmutable)
> }
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - __bss_end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> + }
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> }
>
> /DISCARD/ : { *(.dynstr*) }
> diff --cc arch/arm/lib/Makefile
> index 24c7e7a,11c2674..6ae161a
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@@ -39,10 -39,8 +39,11 @@@ GLCOBJS += div0.
> SOBJS-y += crt0.o
>
> ifndef CONFIG_SPL_BUILD
> -COBJS-y += bss.o
> +ifndef CONFIG_SYS_GENERIC_BOARD
> COBJS-y += board.o
> +endif
> ++COBJS-y += bss.o
> +
> COBJS-y += bootm.o
> COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
> SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
> diff --cc arch/arm/lib/bss.c
> index 0000000,7c0b154..99eda59
> mode 000000,100644..100644
> --- a/arch/arm/lib/bss.c
> +++ b/arch/arm/lib/bss.c
> @@@ -1,0 -1,39 +1,39 @@@
> + /*
> + * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> + /**
> + * These two symbols are declared in a C file so that the linker
> + * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
> + * it would use if the symbols were defined in the linker file.
> + * Using only R_ARM_RELATIVE relocation ensures that references to
> + * the symbols are correct after as well as before relocation.
> + *
> + * We need a 0-byte-size type for these symbols, and the compiler
> + * does not allow defining objects of C type 'void'. Using an empty
> + * struct is allowed by the compiler, but causes gcc versions 4.4 and
> + * below to complain about aliasing. Therefore we use the next best
> + * thing: zero-sized arrays, which are both 0-byte-size and exempt from
> + * aliasing warnings.
> + */
> +
> + char __bss_start[0] __attribute__((used, section(".__bss_start")));
> -char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
> ++char __bss_end[0] __attribute__((used, section(".__bss_end")));
> diff --cc board/actux1/u-boot.lds
> index a0d217b,7cf5b46..c76728a
> --- a/board/actux1/u-boot.lds
> +++ b/board/actux1/u-boot.lds
> @@@ -72,13 -72,21 +72,21 @@@ SECTION
> *(.dynsym)
> }
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + _end = .;
> +
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - _end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> }
> - __bss_end =.;
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> + }
> +
> /DISCARD/ : { *(.dynstr*) }
> /DISCARD/ : { *(.dynamic*) }
> /DISCARD/ : { *(.plt*) }
> diff --cc board/actux2/u-boot.lds
> index da2b4e2,e9b5547..984f70e
> --- a/board/actux2/u-boot.lds
> +++ b/board/actux2/u-boot.lds
> @@@ -72,13 -72,21 +72,21 @@@ SECTION
> *(.dynsym)
> }
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + _end = .;
> +
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - _end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> }
> - __bss_end =.;
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> + }
> +
> /DISCARD/ : { *(.dynstr*) }
> /DISCARD/ : { *(.dynamic*) }
> /DISCARD/ : { *(.plt*) }
> diff --cc board/actux3/u-boot.lds
> index f922033,b79ea3c..fc48cf0
> --- a/board/actux3/u-boot.lds
> +++ b/board/actux3/u-boot.lds
> @@@ -72,13 -72,21 +72,21 @@@ SECTION
> *(.dynsym)
> }
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + _end = .;
> +
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - _end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> }
> - __bss_end =.;
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> + }
> +
> /DISCARD/ : { *(.dynstr*) }
> /DISCARD/ : { *(.dynamic*) }
> /DISCARD/ : { *(.plt*) }
> diff --cc board/dvlhost/u-boot.lds
> index ed91003,eb83b6f..b13d3e1
> --- a/board/dvlhost/u-boot.lds
> +++ b/board/dvlhost/u-boot.lds
> @@@ -72,13 -72,21 +72,21 @@@ SECTION
> *(.dynsym)
> }
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> + _end = .;
> +
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> *(.bss*)
> . = ALIGN(4);
> - _end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> }
> - __bss_end =.;
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> + }
> +
> /DISCARD/ : { *(.dynstr*) }
> /DISCARD/ : { *(.dynamic*) }
> /DISCARD/ : { *(.plt*) }
> diff --cc board/freescale/mx31ads/u-boot.lds
> index 4d1858b,2d08fea..264c4e8
> --- a/board/freescale/mx31ads/u-boot.lds
> +++ b/board/freescale/mx31ads/u-boot.lds
> @@@ -80,11 -80,17 +80,17 @@@ SECTION
>
> _end = .;
>
> - .bss __rel_dyn_start (OVERLAY) : {
> - __bss_start = .;
> - *(.bss)
> + .bss_start __rel_dyn_start (OVERLAY) : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss __bss_start (OVERLAY) : {
> + *(.bss*)
> . = ALIGN(4);
> - __bss_end = .;
> - ___bssend___ = .;
> ++ __bss_end = .;
> + }
> - .bss_end ___bssend___ (OVERLAY) : {
> - KEEP(*(.__bss_end__));
> ++ .bss_end __bss_end (OVERLAY) : {
> ++ KEEP(*(__bss_end));
> }
>
> /DISCARD/ : { *(.bss*) }
> diff --cc doc/README.scrapyard
> index 7d73ea0,e9ca96c..189b883
> --- a/doc/README.scrapyard
> +++ b/doc/README.scrapyard
> @@@ -9,85 -9,84 +9,86 @@@ maintain a list of such former fellows
> easily if here is something they might want to dig for...
>
>
> - Board Arch CPU removed Commit last known maintainer/contact
> - =============================================================================
> - AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
> - c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
> - ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
> - IAD210 powerpc mpc860 - - -
> - LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
> - SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
> - SX1 arm arm925t - -
> - TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
> - apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
> - tb0229 mips mips32 3f3110d 2011-12-12
> - rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
> - OXC powerpc MPC8240 309a292 2011-12-07
> - BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
> - xm250 arm pxa c746cdd 2011-25-11
> - pleb2 arm pxa b185a1c 2011-25-11
> - cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
> - cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
> - mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
> - ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
> - ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
> - zylonite arm pxa b66521a 2011-09-05
> - shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
> - modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
> - lpc2292sodimm arm arm720t d1a067a 2011-09-05
> - lart arm sa1100 3d57573 2011-09-05 Alex Z?pke <azu@sysgo.de>
> - impa7 arm arm720t c1f8750 2011-09-05 Marius Gr?ger <mag@sysgo.de>
> - gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
> - evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
> - ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr?ger <mag@sysgo.de>
> - dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z?pke <azu@sysgo.de>
> - SMN42 arm arm720t 6aac646 2011-09-05
> - at91rm9200dk arm arm920t 1c85752 2011-07-17
> - m501sk arm arm920t b1a2bd4 2011-07-17
> - kb9202 arm arm920t 5bd3814 2011-07-17
> - csb637 arm arm920t d14af08 2011-07-17
> - cmc_pu2 arm arm920t 37a9b4d 2011-07-17
> - at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
> - voiceblue arm arm925t 1b793a4 2011-07-17
> - smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
> - sbc2410x arm arm920t 1f7f0ed 2011-07-17
> - netstar arm arm925t 6ea2405 2011-07-17
> - mx1fs2 arm arm920t 6962419 2011-07-17
> - lpd7a404 arm lh7a40x 957731e 2011-07-17
> - edb9301 arm arm920t 716f7ad 2011-07-17
> - edb9302 arm arm920t 716f7ad 2011-07-17
> - edb9302a arm arm920t 716f7ad 2011-07-17
> - edb9307 arm arm920t 716f7ad 2011-07-17
> - edb9307a arm arm920t 716f7ad 2011-07-17
> - edb9312 arm arm920t 716f7ad 2011-07-17
> - edb9315 arm arm920t 716f7ad 2011-07-17
> - edb9315a arm arm920t 716f7ad 2011-07-17
> - B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
> - armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
> - assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
> - trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
> - xsengine ARM PXA2xx 4262a7c 2010-10-20
> - wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
> - delta ARM PXA2xx 75e2035 2010-10-20
> - mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B?nard <eric@eukrea.com>
> - barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
> - ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
> - VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
> - NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> - CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> - logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
> - CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
> - PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
> - spieval powerpc MPC5200 69434e4 2010-09-19
> - smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
> - HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
> - GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
> - AmigaOneG3SE 953b7e6 2010-06-23
> - suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
> - XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
> - MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
> - adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
> - R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
> - CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> - PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
> + Board Arch CPU Commit Removed Last known maintainer/contact
> + =================================================================================================
> + ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
> + AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> + c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> + ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> + IAD210 powerpc mpc860 1b0757e 2012-10-28 -
> + LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
> + SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
> + SX1 arm arm925t 53c4154 2012-10-26
> + TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
> + apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
> + tb0229 mips mips32 3f3110d 2011-12-12
> + rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
> + OXC powerpc MPC8240 309a292 2011-12-07
> + BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
> + xm250 arm pxa c746cdd 2011-25-11
> + pleb2 arm pxa b185a1c 2011-25-11
> + cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
> + cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
> + mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
> + ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
> + ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
> + zylonite arm pxa b66521a 2011-09-05
> + shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
> + modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
> + lpc2292sodimm arm arm720t d1a067a 2011-09-05
> + lart arm sa1100 3d57573 2011-09-05 Alex Z?pke <azu@sysgo.de>
> + impa7 arm arm720t c1f8750 2011-09-05 Marius Gr?ger <mag@sysgo.de>
> + gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
> + evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
> + ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr?ger <mag@sysgo.de>
> + dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z?pke <azu@sysgo.de>
> + SMN42 arm arm720t 6aac646 2011-09-05
> + at91rm9200dk arm arm920t 1c85752 2011-07-17
> + m501sk arm arm920t b1a2bd4 2011-07-17
> + kb9202 arm arm920t 5bd3814 2011-07-17
> + csb637 arm arm920t d14af08 2011-07-17
> + cmc_pu2 arm arm920t 37a9b4d 2011-07-17
> + at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
> + voiceblue arm arm925t 1b793a4 2011-07-17
> + smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
> + sbc2410x arm arm920t 1f7f0ed 2011-07-17
> + netstar arm arm925t 6ea2405 2011-07-17
> + mx1fs2 arm arm920t 6962419 2011-07-17
> + lpd7a404 arm lh7a40x 957731e 2011-07-17
> + edb9301 arm arm920t 716f7ad 2011-07-17
> + edb9302 arm arm920t 716f7ad 2011-07-17
> + edb9302a arm arm920t 716f7ad 2011-07-17
> + edb9307 arm arm920t 716f7ad 2011-07-17
> + edb9307a arm arm920t 716f7ad 2011-07-17
> + edb9312 arm arm920t 716f7ad 2011-07-17
> + edb9315 arm arm920t 716f7ad 2011-07-17
> + edb9315a arm arm920t 716f7ad 2011-07-17
> + B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
> + armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
> + assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
> + trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
> + xsengine ARM PXA2xx 4262a7c 2010-10-20
> + wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
> + delta ARM PXA2xx 75e2035 2010-10-20
> + mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B?nard <eric@eukrea.com>
> + barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
> + ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
> + VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
> + NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> + CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
> + logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
> + CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
> + PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
> + spieval powerpc MPC5200 69434e4 2010-09-19
> + smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
> + HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
> + GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
> + AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
> + suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
> + XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
> + MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
> + adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
> + R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
> + CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> ++PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
> +PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
> diff --cc include/configs/tegra-common.h
> index 88acccf,4cc35e5..036ded0
> --- a/include/configs/tegra-common.h
> +++ b/include/configs/tegra-common.h
> @@@ -157,6 -167,7 +167,8 @@@
> #define CONFIG_SPL_SERIAL_SUPPORT
> #define CONFIG_SPL_GPIO_SUPPORT
>
> +#define CONFIG_SYS_GENERIC_BOARD
> + /* Misc utility code */
> + #define CONFIG_BOUNCE_BUFFER
>
> #endif /* _TEGRA_COMMON_H_ */
>
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
@ 2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Tom Rini @ 2013-03-18 17:06 UTC (permalink / raw)
To: u-boot
On Fri, Mar 15, 2013 at 11:01:12PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> Here is a PR for ARM. Note that doc/README.scrapyard will need a manual
> merge resolution due to ARM tree having a commit that reorders the
> headers and reformats the lines while mainline has a commit adding two
> new entries still in the older format.
>
> The following changes since commit
> fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
>
> x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b27673ccbd3d5435319b5c09c3e7061f559f925d:
>
> Merge branch 'u-boot-tegra/master' into
> 'u-boot-arm/master' (2013-03-15 20:50:43 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (9):
> Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> arm: omap: map u_boot_lists section to .sram
> Remove linker lists (LGAs) from SPL linker scripts
> arm: make __bss_start and __bss_end__ compiler-generated
> Refactor linker-generated arrays
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>
> Beno??t Th??baudeau (6):
> imx: mx6q DDR3 init: Fix tMRD
> imx: mx6q DDR3 init: Fix tXPR
> imx: mx6q DDR3 init: Fix SDE_to_RST
> imx: mx6q DDR3 init: Fix RST_to_CKE
> imx: mx6q DDR3 init: Fix MR0.PPD
> imx: mx6q DDR3 init: Benefit from available CL = 7
>
> Bo Shen (3):
> ARM: atmel: add at91sam9g20ek_2mmc nand boot support
> ARM: at91: change nand flash table
> ARM: at91sam9x5: Using CPU string directly
>
> Chase Maupin (3):
> am335x_evm: Add NAND environment variables
> am335x_evm: Add SPI environment variables
> am335x_evm: Add NET environment variables
>
> Enric Balletbo i Serra (7):
> OMAP3: igep00x0: use official board names.
> OMAP3: igep00x0: add missing include mach-types.h
> OMAP3: igep00x0: Add new IGEP COM PROTON.
> SPL: ONENAND: Fix some ONENAND related defines.
> SPL: ONENAND: Fix onenand_spl_load_image implementation.
> SPL: ONENAND: Support SPL to boot u-boot from OneNAND.
> OMAP3: Initialize gpmc if SPL_ONENAND_SUPPORT is enabled.
>
> Eric Nelson (8):
> i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
> i.MX6: mx6qsabrelite: indent with tabs
> i.MX6: consolidate pad names for multi-CPU boards
> i.MX6: crm_regs: define CCM_CCGRx for use in board config files
> i.MX6: crm_regs: define IOMUXC_GPR4/6/7
> i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
> i.MX6: Add DDR controller registers
> Add Boundary Devices Nitrogen6X boards
>
> Fabio Estevam (6):
> mx6: Disable Power Down Bit of watchdog
> mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
> mx23evk: Turn on caches
> common: cmd_sata: Fix usage text for 'sata init'
> mx6: Provide a structure for accessing HDMI registers
> nitrogen6x: Fix RAM size variable
>
> Fadil Berisha (2):
> mxs: timrot: Add support to i.MX23
> mxs: timrot: Rename local macros
>
> Howard Gray (1):
> omap3: mvblx: change console to ttyO0 and make silent by default.
>
> Ilya Yanok (4):
> spl: support for booting via usbeth
> am33xx: support for booting via usbeth
> am335x_evm: enable support for booting via USB
> doc/SPL/README.am335x-network: Document using ethernet (and USB)
> SPL
>
> Jesse Gilles (1):
> ARM: sam9x5: fix ethernet pins in MII mode
>
> Lars Poeschel (1):
> am33xx: pcm051: Remove wp pin mux for sd-card
>
> Lokesh Vutla (13):
> ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
> ARM: OMAP4+: Cleanup emif specific files
> ARM: OMAP4+: Make control module register structure generic
> ARM: OMAP5: Clean up iosettings code
> ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
> ARM: OMAP5: srcomp: enable slew rate compensation cells after
> powerup arm: dra7xx: clock: Add the prcm changes
> arm: dra7xx: clock: Add the dplls data
> arm: dra7xx: Add control module changes
> arm: dra7xx: Add DDR related data for DRA752 ES1.0
> arm: dra7xx: Add board files for DRA7XX socs
> arm: dra7xx: Add dra7xx_evm build support
> arm: dra7xx: Add silicon id support for DRA752 soc
>
> Lucas Stach (7):
> tegra: usb: set USB_PORTS_MAX to correct value
> tegra: usb: make controller init functions more self contained
> tegra: usb: remove unneeded function parameter
> tegra: usb: move controller init into start_port
> tegra: usb: various small cleanups
> tegra: usb: move implementation into right directory
> tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
>
> Marek Vasut (7):
> mxs: Reset the EMI block on mx23
> mxs: mmc: spi: dma: Better wrap the MXS differences
> mxs: spi: Fix the MXS SPI for mx23
> mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
> mxs: Squash the header file usage in ehci-mxs
> mxs: Make ehci-mxs multiport capable
> mxs: m28: Enable power to USB port 0
>
> Mark Jackson (1):
> Allow AM33xx boards to setup GPMC chipselects.
>
> Michael Jones (2):
> omap3: mvblx: select fpgafilename according to orientation
> omap3: mvblx: pass FPGA version to the kernel
>
> Michal Simek (3):
> xilinx: zynq: Enable DCC and create new zynq_dcc board
> arm: zynq: Add SLCR support with system reset
> arm: zynq: Add lowlevel initialization to C
>
> Mugunthan V N (1):
> am335x: cpsw: optimize cpsw_send to increase network performance
>
> Nicolas Ferre (2):
> arm: at91/configs: add libfdt to configuration
> arm: at91/configs: add bootz to configuration
>
> Nikita Kiryanov (14):
> omap: consolidate common mmc definitions
> omap_hsmmc: fix out of bounds array access
> omap_hsmmc: introduce omap_hsmmc_data struct
> omap_hsmmc: implement driver check for card detection
> cm-t35: implement board specific card detect check
> mmc: add support for write protection
> omap_hsmmc: add driver check for write protection
> omap3: add useful dss defines
> omap3: allow dynamic selection of gfx_format
> lcd: add option for board specific splash screen preparation
> cm-t35: add support for dvi displays
> cm-t35: add support for user defined lcd parameters
> lcd: implement a callback for splashimage
> cm_t35: prevent splashimage from being set to a bad value
>
> Otavio Salvador (11):
> build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
> mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
> CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in
> memory initialization mx23evk: Adjust DRAM control register to use full
> 128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling
> __led_set mxs: Fix iomux.h to not break build during assembly stage
> mx23_olinuxino: Add support for status LED
> mx23evk: Enable USB support
> mx23_olinuxino: Enable USB support
> mx23_olinuxino: Add ethernet support
> mx23_olinuxino: Fix warning for implicit declaration
>
> SRICHARAN R (6):
> ARM: OMAP4+: Change the PRCM structure prototype common for all
> Socs ARM: OMAP4+: Cleanup the clocks layer
> ARM: OMAP4+: Clean up the pmic code
> ARM: OMAP5: Add silicon id support for ES2.0 revision.
> ARM: OMAP5: clock: Add the prcm register changes required for
> ES2.0 ARM: OMAP4/5: clocks: Add the required OPP settings as per the
> latest addendum
>
> Stefano Babic (3):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> Merge branch 'master' of git://git.denx.de/u-boot-arm
> USB: drop unneeded header in ehci-mx6
>
> Stephen Warren (8):
> ARM: mx6: use common CPU errata config options
> ARM: implement some Cortex-A9 errata workarounds
> ARM: tegra: enable some CPU errata workarounds
> ARM: tegra: implement WAR for Tegra114 CPU reset vector
> ARM: tegra: make bounce buffer option common
> disk: define HAVE_BLOCK_DEVICE in a common place
> disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART
> ARM: tegra: enable a common set of disk-related commands
> everywhere
>
> Tom Rini (9):
> am335x evm: Add am335x_evm_spiboot target
> am335x_evm: Never set CONFIG_EXTRA_ENV_SETTINGS in SPL
> am335x_evm: Add am335x_evm_usbspl build target
> am33xx: Update DDR3 EMIF configuration sequence
> am335x_evm: Enable CONFIG_CMD_BOOTZ
> omap5_evm: Enable CONFIG_CMD_BOOTZ
> omap3_beagle: Enable CONFIG_CMD_BOOTZ
> omap4_common: Enable CONFIG_CMD_BOOTZ
> Merge u-boot/master into u-boot-ti/master
>
> Tom Warren (27):
> Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to
> work Tegra: I2C: Add T114 clock support to tegra_i2c driver
> Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
> Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
> Tegra: fdt: Change /include/ to #include for C preprocessor
> Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
> Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
> Tegra: MMC: Add DT support to MMC driver for all T20 boards
> Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files
> Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO,
> clock) Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs
> Tegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define
> Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO,
> tegra_car) Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file
> Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3
> init Tegra30: Cardhu: Add pad config tables/code based on pinmux code
> Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for
> now) Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30
> Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines
> mmc: Tegra: Add SD bus power/voltage function and MMC pad init
> call. Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec &
> driver Tegra30: MMC: Enable DT MMC driver support for Tegra30 Cardhu
> boards Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry
> Tegra114: Fix/update GP padcfg register struct
> Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock
> bits Tegra114: fdt: Move aliases from dtsi to dts file as per other
> Tegras Tegra114: Dalmore: Add pad config tables/code based on pinmux
> code
>
> Tomas Novotny (2):
> da8xx: ea20: Add the configuration define for the exact SoC
> variant da8xx: Add the missing pinmux for da830 to the gpio driver
>
> Wolfgang Denk (2):
> README.scrapyard: add missing commit IDs
> ARM: ns9750dev: remove remainders of dead board
>
> fabio.estevam at freescale.com (1):
> nitrogen: Use unsigned long to specify the total RAM size
>
> robertcnelson at gmail.com (2):
> beagle: expansion boards: retry i2c_read with 16bit addressing
> beagle: expansion boards: add LSR COM6L adapter
I've merged, but not pushed this, with the following merge commit (I
couldn't get a nice pretty print like last time):
To try and explain this since diff-diffs are funny:
- Consolidate around using __bss_end (so in a few new files, and a lot
of changed files, add __bss_end not __bssend__ or similar).
- Add hashes for PCIPPC2 / PCIPPC6 in scrapyard.
- In tegra20, both CONFIG_SYS_GENERIC_BOARD and CONFIG_BOUNCE_BUFFER are
set.
commit cf0d1242c87217ba0ce5ecb2f87dfcd1b40b7892
Merge: b5bec88 b27673c
Author: Tom Rini <trini@ti.com>
Date: Mon Mar 18 12:31:00 2013 -0400
Merge branch 'master' of git://git.denx.de/u-boot-arm
Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end. We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with IDs for when stuff was removed.
Conflicts:
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/lib/Makefile
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
doc/README.scrapyard
include/configs/tegra-common.h
Build tested for all of ARM and run-time tested on am335x_evm.
Signed-off-by: Tom Rini <trini@ti.com>
diff --cc arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
index 0000000,69f6d48..b6a929f
mode 000000,100644..100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@@ -1,0 -1,67 +1,67 @@@
+ /*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+ MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ } >.sdram
+ }
diff --cc arch/arm/cpu/ixp/u-boot.lds
index 2c823e1,5e66dd1..8345b55
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@@ -67,11 -67,17 +67,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/cpu/u-boot-spl.lds
index 0000000,8321afb..3c0d99c
mode 000000,100644..100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@@ -1,0 -1,93 +1,93 @@@
+ /*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+ OUTPUT_ARCH(arm)
+ ENTRY(_start)
+ SECTIONS
+ {
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ __image_copy_start = .;
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ __image_copy_end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
- __bss_end__ = .;
++ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ }
+
+ #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
-ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
++ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+ #endif
diff --cc arch/arm/cpu/u-boot.lds
index b337e7b,d4ad352..3a1083d
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@@ -81,11 -81,17 +81,18 @@@ SECTION
*(.mmutable)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --cc arch/arm/lib/Makefile
index 24c7e7a,11c2674..6ae161a
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@@ -39,10 -39,8 +39,11 @@@ GLCOBJS += div0.
SOBJS-y += crt0.o
ifndef CONFIG_SPL_BUILD
-COBJS-y += bss.o
+ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
+endif
++COBJS-y += bss.o
+
COBJS-y += bootm.o
COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
diff --cc arch/arm/lib/bss.c
index 0000000,7c0b154..99eda59
mode 000000,100644..100644
--- a/arch/arm/lib/bss.c
+++ b/arch/arm/lib/bss.c
@@@ -1,0 -1,39 +1,39 @@@
+ /*
+ * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /**
+ * These two symbols are declared in a C file so that the linker
+ * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
+ * it would use if the symbols were defined in the linker file.
+ * Using only R_ARM_RELATIVE relocation ensures that references to
+ * the symbols are correct after as well as before relocation.
+ *
+ * We need a 0-byte-size type for these symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
+
+ char __bss_start[0] __attribute__((used, section(".__bss_start")));
-char __bss_end__[0] __attribute__((used, section(".__bss_end__")));
++char __bss_end[0] __attribute__((used, section(".__bss_end")));
diff --cc board/actux1/u-boot.lds
index a0d217b,7cf5b46..c76728a
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux2/u-boot.lds
index da2b4e2,e9b5547..984f70e
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/actux3/u-boot.lds
index f922033,b79ea3c..fc48cf0
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/dvlhost/u-boot.lds
index ed91003,eb83b6f..b13d3e1
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@@ -72,13 -72,21 +72,21 @@@ SECTION
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
- ___bssend___ = .;
++ __bss_end = .;
}
- __bss_end =.;
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --cc board/freescale/mx31ads/u-boot.lds
index 4d1858b,2d08fea..264c4e8
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@@ -80,11 -80,17 +80,17 @@@ SECTION
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
+ *(.bss*)
. = ALIGN(4);
- __bss_end = .;
- ___bssend___ = .;
++ __bss_end = .;
+ }
- .bss_end ___bssend___ (OVERLAY) : {
- KEEP(*(.__bss_end__));
++ .bss_end __bss_end (OVERLAY) : {
++ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.bss*) }
diff --cc doc/README.scrapyard
index 7d73ea0,e9ca96c..189b883
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@@ -9,85 -9,84 +9,86 @@@ maintain a list of such former fellows
easily if here is something they might want to dig for...
- Board Arch CPU removed Commit last known maintainer/contact
- =============================================================================
- AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
- c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
- ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- IAD210 powerpc mpc860 - - -
- LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
- SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
- SX1 arm arm925t - -
- TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
- apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
- tb0229 mips mips32 3f3110d 2011-12-12
- rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
- OXC powerpc MPC8240 309a292 2011-12-07
- BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
- xm250 arm pxa c746cdd 2011-25-11
- pleb2 arm pxa b185a1c 2011-25-11
- cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
- cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
- mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
- ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
- ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
- zylonite arm pxa b66521a 2011-09-05
- shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
- modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
- lpc2292sodimm arm arm720t d1a067a 2011-09-05
- lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
- impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
- evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
- ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
- dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
- SMN42 arm arm720t 6aac646 2011-09-05
- at91rm9200dk arm arm920t 1c85752 2011-07-17
- m501sk arm arm920t b1a2bd4 2011-07-17
- kb9202 arm arm920t 5bd3814 2011-07-17
- csb637 arm arm920t d14af08 2011-07-17
- cmc_pu2 arm arm920t 37a9b4d 2011-07-17
- at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
- voiceblue arm arm925t 1b793a4 2011-07-17
- smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
- sbc2410x arm arm920t 1f7f0ed 2011-07-17
- netstar arm arm925t 6ea2405 2011-07-17
- mx1fs2 arm arm920t 6962419 2011-07-17
- lpd7a404 arm lh7a40x 957731e 2011-07-17
- edb9301 arm arm920t 716f7ad 2011-07-17
- edb9302 arm arm920t 716f7ad 2011-07-17
- edb9302a arm arm920t 716f7ad 2011-07-17
- edb9307 arm arm920t 716f7ad 2011-07-17
- edb9307a arm arm920t 716f7ad 2011-07-17
- edb9312 arm arm920t 716f7ad 2011-07-17
- edb9315 arm arm920t 716f7ad 2011-07-17
- edb9315a arm arm920t 716f7ad 2011-07-17
- B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
- armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
- assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
- trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
- xsengine ARM PXA2xx 4262a7c 2010-10-20
- wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
- delta ARM PXA2xx 75e2035 2010-10-20
- mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
- barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
- ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
- VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
- NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
- logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
- CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
- PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
- spieval powerpc MPC5200 69434e4 2010-09-19
- smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
- HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
- GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
- AmigaOneG3SE 953b7e6 2010-06-23
- suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
- XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
- MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
- adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
- R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
- CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+ Board Arch CPU Commit Removed Last known maintainer/contact
+ =================================================================================================
+ ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
+ AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ IAD210 powerpc mpc860 1b0757e 2012-10-28 -
+ LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
+ SX1 arm arm925t 53c4154 2012-10-26
+ TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
+ apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
+ tb0229 mips mips32 3f3110d 2011-12-12
+ rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
+ OXC powerpc MPC8240 309a292 2011-12-07
+ BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
+ xm250 arm pxa c746cdd 2011-25-11
+ pleb2 arm pxa b185a1c 2011-25-11
+ cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
+ cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
+ mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
+ ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
+ ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
+ zylonite arm pxa b66521a 2011-09-05
+ shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
+ modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
+ lpc2292sodimm arm arm720t d1a067a 2011-09-05
+ lart arm sa1100 3d57573 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ impa7 arm arm720t c1f8750 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
+ evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
+ ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gr??ger <mag@sysgo.de>
+ dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Z??pke <azu@sysgo.de>
+ SMN42 arm arm720t 6aac646 2011-09-05
+ at91rm9200dk arm arm920t 1c85752 2011-07-17
+ m501sk arm arm920t b1a2bd4 2011-07-17
+ kb9202 arm arm920t 5bd3814 2011-07-17
+ csb637 arm arm920t d14af08 2011-07-17
+ cmc_pu2 arm arm920t 37a9b4d 2011-07-17
+ at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
+ voiceblue arm arm925t 1b793a4 2011-07-17
+ smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
+ sbc2410x arm arm920t 1f7f0ed 2011-07-17
+ netstar arm arm925t 6ea2405 2011-07-17
+ mx1fs2 arm arm920t 6962419 2011-07-17
+ lpd7a404 arm lh7a40x 957731e 2011-07-17
+ edb9301 arm arm920t 716f7ad 2011-07-17
+ edb9302 arm arm920t 716f7ad 2011-07-17
+ edb9302a arm arm920t 716f7ad 2011-07-17
+ edb9307 arm arm920t 716f7ad 2011-07-17
+ edb9307a arm arm920t 716f7ad 2011-07-17
+ edb9312 arm arm920t 716f7ad 2011-07-17
+ edb9315 arm arm920t 716f7ad 2011-07-17
+ edb9315a arm arm920t 716f7ad 2011-07-17
+ B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
+ armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
+ assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
+ trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
+ xsengine ARM PXA2xx 4262a7c 2010-10-20
+ wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
+ delta ARM PXA2xx 75e2035 2010-10-20
+ mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B??nard <eric@eukrea.com>
+ barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
+ ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
+ VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
+ NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+ logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
+ CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
+ PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
+ spieval powerpc MPC5200 69434e4 2010-09-19
+ smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
+ HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
+ GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
+ AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
+ suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
+ XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
+ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
+ adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
+ R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
+ CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
++PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
+PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
diff --cc include/configs/tegra-common.h
index 88acccf,4cc35e5..036ded0
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@@ -157,6 -167,7 +167,8 @@@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_GENERIC_BOARD
+ /* Misc utility code */
+ #define CONFIG_BOUNCE_BUFFER
#endif /* _TEGRA_COMMON_H_ */
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130318/9de2b73a/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-16 8:19 ` Albert ARIBAUD
@ 2013-03-17 19:40 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-03-17 19:40 UTC (permalink / raw)
To: u-boot
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 03/16/2013 04:19 AM, Albert ARIBAUD wrote:
> Hi Albert,
>
> On Fri, 15 Mar 2013 23:01:12 +0100, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>
>> Hello Tom,
>>
>> Here is a PR for ARM. Note that doc/README.scrapyard will need a
>> manual merge resolution due to ARM tree having a commit that
>> reorders the headers and reformats the lines while mainline has a
>> commit adding two new entries still in the older format.
>>
>> The following changes since commit
>> fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
>>
>> x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52
>> -0800)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm master
>>
>> for you to fetch changes up to
>> b27673ccbd3d5435319b5c09c3e7061f559f925d:
>>
>> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>> (2013-03-15 20:50:43 +0100)
>
> Sorry about the extra merge conflicts -- at the time of my posting,
> I only had the scapyard one. Seems like most new conflicts are due
> to Simon's BSS name change; that should be resolved by taking my
> BSS changes and changing the symbol's name as Simon does elsewhere,
> but by the looks of your IRC comment, you'd already figured it out
> and only the tegra conflict is left to resolve.
I suspect I have all conflicts resolved correctly, but can't run-time
test them. If someone with a Tegra platform would like to get ahold
of me privately, quickly, I'll send along a binary to try out and
confirm I've got the merge correct. Otherwise I'll post the diff
monday morning.
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=L6aj
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-03-15 22:01 Albert ARIBAUD
@ 2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
1 sibling, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-03-16 8:19 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Fri, 15 Mar 2013 23:01:12 +0100, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hello Tom,
>
> Here is a PR for ARM. Note that doc/README.scrapyard will need a manual
> merge resolution due to ARM tree having a commit that reorders the
> headers and reformats the lines while mainline has a commit adding two
> new entries still in the older format.
>
> The following changes since commit
> fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
>
> x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b27673ccbd3d5435319b5c09c3e7061f559f925d:
>
> Merge branch 'u-boot-tegra/master' into
> 'u-boot-arm/master' (2013-03-15 20:50:43 +0100)
Sorry about the extra merge conflicts -- at the time of my posting, I
only had the scapyard one. Seems like most new conflicts are due to
Simon's BSS name change; that should be resolved by taking my BSS
changes and changing the symbol's name as Simon does elsewhere, but by
the looks of your IRC comment, you'd already figured it out and only the
tegra conflict is left to resolve.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-18 17:06 ` Tom Rini
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2013-03-15 22:01 UTC (permalink / raw)
To: u-boot
Hello Tom,
Here is a PR for ARM. Note that doc/README.scrapyard will need a manual
merge resolution due to ARM tree having a commit that reorders the
headers and reformats the lines while mainline has a commit adding two
new entries still in the older format.
The following changes since commit
fc959081d41aab2d6f4614c5fb3dd1b77ffcdcf4:
x86: Enable CONFIG_OF_CONTROL on coreboot (2013-03-04 15:57:52 -0800)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to b27673ccbd3d5435319b5c09c3e7061f559f925d:
Merge branch 'u-boot-tegra/master' into
'u-boot-arm/master' (2013-03-15 20:50:43 +0100)
----------------------------------------------------------------
Albert ARIBAUD (9):
Merge 'u-boot-microblaze/mainline/arm' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
arm: omap: map u_boot_lists section to .sram
Remove linker lists (LGAs) from SPL linker scripts
arm: make __bss_start and __bss_end__ compiler-generated
Refactor linker-generated arrays
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Beno?t Th?baudeau (6):
imx: mx6q DDR3 init: Fix tMRD
imx: mx6q DDR3 init: Fix tXPR
imx: mx6q DDR3 init: Fix SDE_to_RST
imx: mx6q DDR3 init: Fix RST_to_CKE
imx: mx6q DDR3 init: Fix MR0.PPD
imx: mx6q DDR3 init: Benefit from available CL = 7
Bo Shen (3):
ARM: atmel: add at91sam9g20ek_2mmc nand boot support
ARM: at91: change nand flash table
ARM: at91sam9x5: Using CPU string directly
Chase Maupin (3):
am335x_evm: Add NAND environment variables
am335x_evm: Add SPI environment variables
am335x_evm: Add NET environment variables
Enric Balletbo i Serra (7):
OMAP3: igep00x0: use official board names.
OMAP3: igep00x0: add missing include mach-types.h
OMAP3: igep00x0: Add new IGEP COM PROTON.
SPL: ONENAND: Fix some ONENAND related defines.
SPL: ONENAND: Fix onenand_spl_load_image implementation.
SPL: ONENAND: Support SPL to boot u-boot from OneNAND.
OMAP3: Initialize gpmc if SPL_ONENAND_SUPPORT is enabled.
Eric Nelson (8):
i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
i.MX6: mx6qsabrelite: indent with tabs
i.MX6: consolidate pad names for multi-CPU boards
i.MX6: crm_regs: define CCM_CCGRx for use in board config files
i.MX6: crm_regs: define IOMUXC_GPR4/6/7
i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
i.MX6: Add DDR controller registers
Add Boundary Devices Nitrogen6X boards
Fabio Estevam (6):
mx6: Disable Power Down Bit of watchdog
mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
mx23evk: Turn on caches
common: cmd_sata: Fix usage text for 'sata init'
mx6: Provide a structure for accessing HDMI registers
nitrogen6x: Fix RAM size variable
Fadil Berisha (2):
mxs: timrot: Add support to i.MX23
mxs: timrot: Rename local macros
Howard Gray (1):
omap3: mvblx: change console to ttyO0 and make silent by default.
Ilya Yanok (4):
spl: support for booting via usbeth
am33xx: support for booting via usbeth
am335x_evm: enable support for booting via USB
doc/SPL/README.am335x-network: Document using ethernet (and USB)
SPL
Jesse Gilles (1):
ARM: sam9x5: fix ethernet pins in MII mode
Lars Poeschel (1):
am33xx: pcm051: Remove wp pin mux for sd-card
Lokesh Vutla (13):
ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
ARM: OMAP4+: Cleanup emif specific files
ARM: OMAP4+: Make control module register structure generic
ARM: OMAP5: Clean up iosettings code
ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
ARM: OMAP5: srcomp: enable slew rate compensation cells after
powerup arm: dra7xx: clock: Add the prcm changes
arm: dra7xx: clock: Add the dplls data
arm: dra7xx: Add control module changes
arm: dra7xx: Add DDR related data for DRA752 ES1.0
arm: dra7xx: Add board files for DRA7XX socs
arm: dra7xx: Add dra7xx_evm build support
arm: dra7xx: Add silicon id support for DRA752 soc
Lucas Stach (7):
tegra: usb: set USB_PORTS_MAX to correct value
tegra: usb: make controller init functions more self contained
tegra: usb: remove unneeded function parameter
tegra: usb: move controller init into start_port
tegra: usb: various small cleanups
tegra: usb: move implementation into right directory
tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
Marek Vasut (7):
mxs: Reset the EMI block on mx23
mxs: mmc: spi: dma: Better wrap the MXS differences
mxs: spi: Fix the MXS SPI for mx23
mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
mxs: Squash the header file usage in ehci-mxs
mxs: Make ehci-mxs multiport capable
mxs: m28: Enable power to USB port 0
Mark Jackson (1):
Allow AM33xx boards to setup GPMC chipselects.
Michael Jones (2):
omap3: mvblx: select fpgafilename according to orientation
omap3: mvblx: pass FPGA version to the kernel
Michal Simek (3):
xilinx: zynq: Enable DCC and create new zynq_dcc board
arm: zynq: Add SLCR support with system reset
arm: zynq: Add lowlevel initialization to C
Mugunthan V N (1):
am335x: cpsw: optimize cpsw_send to increase network performance
Nicolas Ferre (2):
arm: at91/configs: add libfdt to configuration
arm: at91/configs: add bootz to configuration
Nikita Kiryanov (14):
omap: consolidate common mmc definitions
omap_hsmmc: fix out of bounds array access
omap_hsmmc: introduce omap_hsmmc_data struct
omap_hsmmc: implement driver check for card detection
cm-t35: implement board specific card detect check
mmc: add support for write protection
omap_hsmmc: add driver check for write protection
omap3: add useful dss defines
omap3: allow dynamic selection of gfx_format
lcd: add option for board specific splash screen preparation
cm-t35: add support for dvi displays
cm-t35: add support for user defined lcd parameters
lcd: implement a callback for splashimage
cm_t35: prevent splashimage from being set to a bad value
Otavio Salvador (11):
build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in
memory initialization mx23evk: Adjust DRAM control register to use full
128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling
__led_set mxs: Fix iomux.h to not break build during assembly stage
mx23_olinuxino: Add support for status LED
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support
mx23_olinuxino: Fix warning for implicit declaration
SRICHARAN R (6):
ARM: OMAP4+: Change the PRCM structure prototype common for all
Socs ARM: OMAP4+: Cleanup the clocks layer
ARM: OMAP4+: Clean up the pmic code
ARM: OMAP5: Add silicon id support for ES2.0 revision.
ARM: OMAP5: clock: Add the prcm register changes required for
ES2.0 ARM: OMAP4/5: clocks: Add the required OPP settings as per the
latest addendum
Stefano Babic (3):
Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm
USB: drop unneeded header in ehci-mx6
Stephen Warren (8):
ARM: mx6: use common CPU errata config options
ARM: implement some Cortex-A9 errata workarounds
ARM: tegra: enable some CPU errata workarounds
ARM: tegra: implement WAR for Tegra114 CPU reset vector
ARM: tegra: make bounce buffer option common
disk: define HAVE_BLOCK_DEVICE in a common place
disk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART
ARM: tegra: enable a common set of disk-related commands
everywhere
Tom Rini (9):
am335x evm: Add am335x_evm_spiboot target
am335x_evm: Never set CONFIG_EXTRA_ENV_SETTINGS in SPL
am335x_evm: Add am335x_evm_usbspl build target
am33xx: Update DDR3 EMIF configuration sequence
am335x_evm: Enable CONFIG_CMD_BOOTZ
omap5_evm: Enable CONFIG_CMD_BOOTZ
omap3_beagle: Enable CONFIG_CMD_BOOTZ
omap4_common: Enable CONFIG_CMD_BOOTZ
Merge u-boot/master into u-boot-ti/master
Tom Warren (27):
Tegra114: I2C: Take DVFS out of reset to allow I2C5 (PWR_I2C) to
work Tegra: I2C: Add T114 clock support to tegra_i2c driver
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
Tegra: fdt: Change /include/ to #include for C preprocessor
Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
Tegra: MMC: Add DT support to MMC driver for all T20 boards
Tegra: fdt: Remove memreserve line from Cardhu/Seaboard DT files
Tegra30: fdt: Sync DT nodes with kernel DT files (I2C, SPI, GPIO,
clock) Tegra: Add twarren as maintainer for Tegra30 and Tegra114 SoCs
Tegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO,
tegra_car) Tegra30: Cardhu: Remove unneeded cardhu.c.mmc file
Tegra114: pinmux: Update pinmux tables & code, fix a bug w/SDMMC3
init Tegra30: Cardhu: Add pad config tables/code based on pinmux code
Tegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards (Cardhu for
now) Tegra: MMC: Added/update SDMMC registers/base addresses for T20/T30
Tegra30: MMC: Add SD bus power-rail and SDMMC pad init routines
mmc: Tegra: Add SD bus power/voltage function and MMC pad init
call. Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec &
driver Tegra30: MMC: Enable DT MMC driver support for Tegra30 Cardhu
boards Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry
Tegra114: Fix/update GP padcfg register struct
Tegra114: Dalmore: Always use DEFAULT instead of DISABLE for lock
bits Tegra114: fdt: Move aliases from dtsi to dts file as per other
Tegras Tegra114: Dalmore: Add pad config tables/code based on pinmux
code
Tomas Novotny (2):
da8xx: ea20: Add the configuration define for the exact SoC
variant da8xx: Add the missing pinmux for da830 to the gpio driver
Wolfgang Denk (2):
README.scrapyard: add missing commit IDs
ARM: ns9750dev: remove remainders of dead board
fabio.estevam at freescale.com (1):
nitrogen: Use unsigned long to specify the total RAM size
robertcnelson at gmail.com (2):
beagle: expansion boards: retry i2c_read with 16bit addressing
beagle: expansion boards: add LSR COM6L adapter
.gitignore
| 1 -
MAINTAINERS
| 11 +
Makefile
| 17 +-
README
| 29 ++
arch/arm/cpu/arm1136/mx35/generic.c
| 2 +-
arch/arm/cpu/arm720t/tegra114/cpu.c
| 37 ++-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
| 30 +-
arch/arm/cpu/arm926ejs/config.mk
| 2 +-
arch/arm/cpu/arm926ejs/mxs/clock.c
| 3 +-
arch/arm/cpu/arm926ejs/mxs/mxs_init.h
| 2 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 16 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
| 2 +-
arch/arm/cpu/arm926ejs/mxs/timer.c
| 39 ++-
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
| 6 -
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 6 -
arch/arm/cpu/armv7/Makefile
| 2 +-
arch/arm/cpu/armv7/am33xx/board.c
| 4 +-
arch/arm/cpu/armv7/am33xx/ddr.c
| 12 +-
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
| 67 +++++
arch/arm/cpu/armv7/config.mk
| 2 +-
arch/arm/cpu/armv7/mx6/Makefile
| 1 -
arch/arm/cpu/armv7/mx6/soc.c
| 16 +
arch/arm/cpu/armv7/omap-common/boot-common.c
| 7 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c
| 312 ++++++++++++++------
arch/arm/cpu/armv7/omap-common/emif-common.c
| 73 ++---
arch/arm/cpu/armv7/omap-common/hwinit-common.c
| 23 +-
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
| 4 -
arch/arm/cpu/armv7/omap-common/vc.c
| 11 +-
arch/arm/cpu/armv7/omap3/board.c
| 6 +-
arch/arm/cpu/armv7/omap4/Makefile
| 3 +-
arch/arm/cpu/armv7/omap4/clocks.c
| 517 --------------------------------
arch/arm/cpu/armv7/omap4/hw_data.c
| 491 ++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/omap4/hwinit.c
| 36 +--
arch/arm/cpu/armv7/omap4/prcm-regs.c
| 315 ++++++++++++++++++++
arch/arm/cpu/armv7/omap4/sdram_elpida.c
| 34 ++-
arch/arm/cpu/armv7/omap5/Makefile
| 3 +-
arch/arm/cpu/armv7/omap5/clocks.c
| 494 -------------------------------
arch/arm/cpu/armv7/omap5/hw_data.c
| 596 +++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/omap5/hwinit.c
| 292 ++++++++++++------
arch/arm/cpu/armv7/omap5/prcm-regs.c
| 958 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/omap5/sdram.c
| 214 +++++++++++---
arch/arm/cpu/armv7/start.S
| 19 ++
arch/arm/cpu/armv7/tegra20/Makefile
| 1 -
arch/arm/cpu/armv7/tegra20/usb.c
| 567 -----------------------------------
arch/arm/cpu/armv7/zynq/Makefile
| 1 +
arch/arm/cpu/armv7/zynq/cpu.c
| 28 +-
arch/arm/cpu/armv7/zynq/slcr.c
| 63 ++++
arch/arm/cpu/ixp/u-boot.lds
| 14 +-
arch/arm/cpu/tegra114-common/pinmux.c
| 410 ++++++++++++++++++++------
arch/arm/cpu/tegra30-common/pinmux.c
| 190 +++++++++++-
arch/arm/cpu/u-boot-spl.lds
| 93 ++++++
arch/arm/cpu/u-boot.lds
| 14 +-
arch/arm/dts/tegra114.dtsi
| 75 ++++-
arch/arm/dts/tegra20.dtsi
| 18 +-
arch/arm/dts/tegra30.dtsi
| 124 +++++---
arch/arm/include/asm/arch-am33xx/mmc_host_def.h
| 140 +--------
arch/arm/include/asm/arch-am33xx/spl.h
| 1 +
arch/arm/include/asm/arch-am33xx/sys_proto.h
| 2 +
arch/arm/include/asm/arch-at91/at91sam9x5.h
| 6 -
arch/arm/include/asm/arch-davinci/gpio.h
| 7 +-
arch/arm/include/asm/arch-mx35/spl.h
| 2 +-
arch/arm/include/asm/arch-mx6/crm_regs.h
| 12 +
arch/arm/include/asm/arch-mx6/imx-regs.h
| 8 +
arch/arm/include/asm/arch-mx6/iomux.h
| 5 +
arch/arm/include/asm/arch-mx6/mx6-ddr.h
| 85 ++++++
arch/arm/include/asm/arch-mx6/mx6-pins.h
| 31 ++
arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
| 71 +++++
arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 193 ++++++------
arch/arm/include/asm/arch-mx6/mx6q-ddr.h
| 69 +++++
arch/arm/include/asm/arch-mx6/mx6q_pins.h
| 1671
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/mx6x_pins.h
| 1671
-------------------------------------------------------------------------------------------------------
arch/arm/include/asm/arch-mx6/mxc_hdmi.h
| 1083
++++++++++++++++++++++++++++++++++---------------------------------
arch/arm/include/asm/arch-mxs/dma.h
| 19 +-
arch/arm/include/asm/arch-mxs/imx-regs.h
| 2 +
arch/arm/include/asm/arch-mxs/iomux.h
| 5 +
arch/arm/include/asm/arch-mxs/regs-ssp.h
| 26 ++
arch/arm/include/asm/arch-mxs/regs-timrot.h
| 101 +++++++
arch/arm/include/asm/arch-omap3/dss.h
| 31 ++
arch/arm/include/asm/arch-omap3/mmc_host_def.h
| 139 +--------
arch/arm/include/asm/arch-omap3/spl.h
| 2 +-
arch/arm/include/asm/arch-omap4/clocks.h
| 562 +++--------------------------------
arch/arm/include/asm/arch-omap4/mmc_host_def.h
| 140 +--------
arch/arm/include/asm/arch-omap4/omap.h
| 34 +--
arch/arm/include/asm/arch-omap4/spl.h
| 2 +-
arch/arm/include/asm/arch-omap4/sys_proto.h
| 2 +-
arch/arm/include/asm/arch-omap5/clocks.h
| 539 ++-------------------------------
arch/arm/include/asm/arch-omap5/mmc_host_def.h
| 140 +--------
arch/arm/include/asm/arch-omap5/mux_dra7xx.h
| 344 +++++++++++++++++++++
arch/arm/include/asm/arch-omap5/mux_omap5.h
| 8 -
arch/arm/include/asm/arch-omap5/omap.h
| 125 +++-----
arch/arm/include/asm/arch-omap5/spl.h
| 2 +-
arch/arm/include/asm/arch-omap5/sys_proto.h
| 10 +-
arch/arm/include/asm/arch-tegra/mmc.h
| 2 +-
arch/arm/include/asm/arch-tegra/tegra_i2c.h
| 6 +
arch/arm/include/asm/arch-tegra/tegra_mmc.h
| 48 ++- arch/arm/include/asm/{arch-tegra20 =>
arch-tegra}/usb.h | 22 --
arch/arm/include/asm/arch-tegra114/gp_padctrl.h
| 34 ++-
arch/arm/include/asm/arch-tegra114/pinmux.h
| 246 ++++++++--------
arch/arm/include/asm/arch-tegra20/tegra.h
| 1 -
arch/arm/include/asm/arch-tegra30/gp_padctrl.h
| 6 +
arch/arm/include/asm/arch-tegra30/pinmux.h
| 67 ++++-
arch/arm/include/asm/arch-tegra30/tegra.h
| 2 +
arch/arm/include/asm/arch-zynq/hardware.h
| 85 ++++++ arch/arm/{cpu/armv7/mx6/lowlevel_init.S =>
include/asm/arch-zynq/sys_proto.h} | 27 +-
arch/arm/include/asm/armv7.h
| 1 +
arch/arm/include/asm/emif.h
| 20 +-
arch/arm/include/asm/omap_common.h
| 523 ++++++++++++++++++++++++++++++++
arch/arm/include/asm/omap_mmc.h
| 168 +++++++++++
arch/arm/lib/Makefile
| 1 +
arch/arm/lib/bss.c
| 39 +++
arch/avr32/cpu/u-boot.lds
| 2 +-
arch/blackfin/cpu/u-boot.lds
| 2 +-
arch/microblaze/cpu/u-boot.lds
| 2 +-
arch/mips/cpu/u-boot.lds
| 2 +-
arch/nds32/cpu/n1213/u-boot.lds
| 2 +-
arch/nios2/cpu/u-boot.lds
| 2 +-
arch/powerpc/cpu/74xx_7xx/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc512x/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc5xx/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
| 2 +-
arch/powerpc/cpu/mpc5xxx/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc8220/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc824x/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc8260/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc83xx/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
| 2 +-
arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
| 2 +-
arch/powerpc/cpu/mpc85xx/u-boot.lds
| 2 +-
arch/powerpc/cpu/mpc86xx/u-boot.lds
| 2 +-
arch/powerpc/cpu/ppc4xx/u-boot.lds
| 2 +-
arch/sandbox/cpu/u-boot.lds
| 2 +-
arch/sh/cpu/sh2/u-boot.lds
| 2 +-
arch/sh/cpu/sh3/u-boot.lds
| 2 +-
arch/sh/cpu/sh4/u-boot.lds
| 2 +-
arch/x86/cpu/u-boot.lds
| 2 +-
board/BuS/eb_cpu5282/u-boot.lds
| 2 +-
board/LEOX/elpt860/u-boot.lds
| 2 +-
board/RPXClassic/u-boot.lds
| 2 +-
board/RPXClassic/u-boot.lds.debug
| 2 +-
board/RPXlite/u-boot.lds
| 2 +-
board/RPXlite/u-boot.lds.debug
| 2 +-
board/RPXlite_dw/u-boot.lds
| 2 +-
board/RPXlite_dw/u-boot.lds.debug
| 2 +-
board/RRvision/u-boot.lds
| 2 +-
board/actux1/u-boot.lds
| 24 +-
board/actux2/u-boot.lds
| 24 +-
board/actux3/u-boot.lds
| 18 +-
board/adder/u-boot.lds
| 2 +-
board/ait/cam_enc_4xx/u-boot-spl.lds
| 4 -
board/altera/nios2-generic/u-boot.lds
| 2 +-
board/amcc/acadia/u-boot-nand.lds
| 2 +-
board/amcc/bamboo/u-boot-nand.lds
| 2 +-
board/amcc/canyonlands/u-boot-nand.lds
| 2 +-
board/amcc/kilauea/u-boot-nand.lds
| 2 +-
board/amcc/sequoia/u-boot-nand.lds
| 2 +-
board/amcc/sequoia/u-boot-ram.lds
| 2 +-
board/astro/mcf5373l/u-boot.lds
| 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c
| 7 +-
board/avionic-design/common/tamonten.c
| 19 +-
board/avionic-design/dts/tegra20-medcom-wide.dts
| 3 +-
board/avionic-design/dts/tegra20-plutux.dts
| 3 +-
board/avionic-design/dts/tegra20-tamonten.dtsi
| 489 ++++++++++++++++++++++++++++++
board/avionic-design/dts/tegra20-tec.dts
| 3 +-
board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
| 58 ++++
board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
| 58 ++++
board/boundary/nitrogen6x/6x_bootscript.txt
| 63 ++++
board/boundary/nitrogen6x/6x_bootscript_android.txt
| 64 ++++
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
| 64 ++++
board/boundary/nitrogen6x/6x_upgrade.txt
| 45 +++
board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
| 58 ++++
board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
| 58 ++++
board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
| 57 ++++
board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
| 58 ++++
board/boundary/nitrogen6x/Makefile
| 41 +++
board/boundary/nitrogen6x/README
| 92 ++++++
board/boundary/nitrogen6x/clocks.cfg
| 46 +++
board/boundary/nitrogen6x/ddr-setup.cfg
| 112 +++++++
board/boundary/nitrogen6x/nitrogen6dl.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6dl2g.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6q.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6q2g.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6s.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6s1g.cfg
| 45 +++
board/boundary/nitrogen6x/nitrogen6x.c
| 895 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/cm_t35/Makefile
| 1 +
board/cm_t35/cm_t35.c
| 16 +-
board/cm_t35/display.c
| 428 +++++++++++++++++++++++++++
board/cobra5272/u-boot.lds
| 2 +-
board/cogent/u-boot.lds
| 2 +-
board/cogent/u-boot.lds.debug
| 2 +-
board/comelit/dig297/dig297.c
| 3 +-
board/compal/dts/tegra20-paz00.dts
| 21 +-
board/compal/paz00/paz00.c
| 26 +-
board/compulab/dts/tegra20-trimslice.dts
| 16 +-
board/compulab/trimslice/trimslice.c
| 23 +-
board/corscience/tricorder/tricorder.c
| 2 +-
board/cray/L1/u-boot.lds.debug
| 2 +-
board/dave/PPChameleonEVB/u-boot.lds
| 2 +-
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
| 5 -
board/davinci/da8xxevm/u-boot-spl-hawk.lds
| 5 -
board/denx/m28evk/m28evk.c
| 4 +
board/dvlhost/u-boot.lds
| 18 +-
board/eltec/mhpc/u-boot.lds
| 2 +-
board/eltec/mhpc/u-boot.lds.debug
| 2 +-
board/emk/top860/u-boot.lds
| 2 +-
board/ep88x/u-boot.lds
| 2 +-
board/esd/dasa_sim/u-boot.lds
| 2 +-
board/esd/pmc440/u-boot-nand.lds
| 2 +-
board/esd/tasreg/u-boot.lds
| 2 +-
board/esteem192e/u-boot.lds
| 2 +-
board/evb64260/u-boot.lds
| 2 +-
board/fads/u-boot.lds
| 2 +-
board/flagadm/u-boot.lds
| 2 +-
board/flagadm/u-boot.lds.debug
| 2 +-
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
| 10 +-
board/freescale/m5208evbe/u-boot.lds
| 2 +-
board/freescale/m52277evb/u-boot.lds
| 2 +-
board/freescale/m5235evb/u-boot.lds
| 2 +-
board/freescale/m5249evb/u-boot.lds
| 2 +-
board/freescale/m5253demo/u-boot.lds
| 2 +-
board/freescale/m5253evbe/u-boot.lds
| 2 +-
board/freescale/m5271evb/u-boot.lds
| 2 +-
board/freescale/m5272c3/u-boot.lds
| 2 +-
board/freescale/m5275evb/u-boot.lds
| 2 +-
board/freescale/m5282evb/u-boot.lds
| 2 +-
board/freescale/m53017evb/u-boot.lds
| 2 +-
board/freescale/m5329evb/u-boot.lds
| 2 +-
board/freescale/m5373evb/u-boot.lds
| 2 +-
board/freescale/m54418twr/u-boot.lds
| 2 +-
board/freescale/m54451evb/u-boot.lds
| 2 +-
board/freescale/m54455evb/u-boot.lds
| 2 +-
board/freescale/m547xevb/u-boot.lds
| 2 +-
board/freescale/m548xevb/u-boot.lds
| 2 +-
board/freescale/mx23evk/spl_boot.c
| 10 +
board/freescale/mx31ads/u-boot.lds
| 16 +-
board/freescale/mx6qarm2/mx6qarm2.c
| 78 ++---
board/freescale/mx6qsabreauto/mx6qsabreauto.c
| 60 ++--
board/freescale/mx6qsabrelite/mx6qsabrelite.c
| 292 +++++++++---------
board/freescale/mx6qsabresd/mx6qsabresd.c
| 102 +++----
board/gaisler/gr_cpci_ax2000/u-boot.lds
| 2 +-
board/gaisler/gr_ep2s60/u-boot.lds
| 2 +-
board/gaisler/gr_xc3s_1500/u-boot.lds
| 2 +-
board/gaisler/grsim/u-boot.lds
| 2 +-
board/gaisler/grsim_leon2/u-boot.lds
| 2 +-
board/gen860t/u-boot-flashenv.lds
| 2 +-
board/gen860t/u-boot.lds
| 2 +-
board/genietv/u-boot.lds
| 2 +-
board/genietv/u-boot.lds.debug
| 2 +-
board/hermes/u-boot.lds
| 2 +-
board/hermes/u-boot.lds.debug
| 2 +-
board/htkw/mcx/mcx.c
| 3 +-
board/hymod/u-boot.lds
| 2 +-
board/hymod/u-boot.lds.debug
| 2 +-
board/icu862/u-boot.lds
| 2 +-
board/icu862/u-boot.lds.debug
| 2 +-
board/idmr/u-boot.lds
| 2 +-
board/ip860/u-boot.lds
| 2 +-
board/ip860/u-boot.lds.debug
| 2 +-
board/isee/igep00x0/igep00x0.c
| 3 +-
board/isee/igep00x0/igep00x0.h
| 7 +-
board/ivm/u-boot.lds
| 2 +-
board/ivm/u-boot.lds.debug
| 2 +-
board/korat/u-boot-F7FC.lds
| 2 +-
board/kup/kup4k/u-boot.lds
| 2 +-
board/kup/kup4k/u-boot.lds.debug
| 2 +-
board/kup/kup4x/u-boot.lds
| 2 +-
board/kup/kup4x/u-boot.lds.debug
| 2 +-
board/logicpd/am3517evm/am3517evm.c
| 3 +-
board/logicpd/omap3som/omap3logic.c
| 2 +-
board/logicpd/zoom1/zoom1.c
| 3 +-
board/logicpd/zoom2/zoom2.c
| 3 +-
board/lwmon/u-boot.lds
| 2 +-
board/lwmon/u-boot.lds.debug
| 2 +-
board/manroland/uc100/u-boot.lds
| 2 +-
board/matrix_vision/mvblx/fpga.c
| 14 +-
board/matrix_vision/mvblx/mvblx.c
| 4 +-
board/matrix_vision/mvblx/sys_eeprom.c
| 24 ++
board/matrix_vision/mvsmr/u-boot.lds
| 2 +-
board/mbx8xx/u-boot.lds
| 2 +-
board/mbx8xx/u-boot.lds.debug
| 2 +-
board/mousse/u-boot.lds
| 2 +-
board/mpl/pip405/u-boot.lds.debug
| 2 +-
board/mvblue/u-boot.lds
| 2 +-
board/netphone/u-boot.lds
| 2 +-
board/netphone/u-boot.lds.debug
| 2 +-
board/netta/u-boot.lds
| 2 +-
board/netta/u-boot.lds.debug
| 2 +-
board/netta2/u-boot.lds
| 2 +-
board/netta2/u-boot.lds.debug
| 2 +-
board/netvia/u-boot.lds
| 2 +-
board/netvia/u-boot.lds.debug
| 2 +-
board/nokia/rx51/rx51.c
| 4 +-
board/ns9750dev/config.mk
| 16 -
board/ns9750dev/flash.c
| 474 -----------------------------
board/ns9750dev/led.c
| 46 ---
board/ns9750dev/lowlevel_init.S
| 298 -------------------
board/ns9750dev/ns9750dev.c
| 125 --------
board/nvidia/cardhu/cardhu.c
| 57 +++-
board/nvidia/cardhu/cardhu.c.mmc
| 151 ----------
board/nvidia/cardhu/pinmux-config-cardhu.h
| 21 +-
board/nvidia/common/board.c
| 56 +++-
board/nvidia/dalmore/dalmore.c
| 3 +
board/nvidia/dalmore/pinmux-config-dalmore.h
| 475 ++++++++++++++++++-----------
board/nvidia/dts/tegra114-dalmore.dts
| 35 ++-
board/nvidia/dts/tegra20-harmony.dts
| 20 +-
board/nvidia/dts/tegra20-seaboard.dts
| 15 +-
board/nvidia/dts/tegra20-ventana.dts
| 17 +-
board/nvidia/dts/tegra20-whistler.dts
| 15 +-
board/nvidia/dts/tegra30-cardhu.dts
| 23 +-
board/nvidia/harmony/harmony.c
| 26 +-
board/nvidia/seaboard/seaboard.c
| 25 +-
board/nvidia/whistler/whistler.c
| 30 +-
board/nx823/u-boot.lds
| 2 +-
board/nx823/u-boot.lds.debug
| 2 +-
board/olimex/mx23_olinuxino/mx23_olinuxino.c
| 13 +
board/olimex/mx23_olinuxino/spl_boot.c
| 8 +
board/openrisc/openrisc-generic/u-boot.lds
| 2 +-
board/overo/overo.c
| 3 +-
board/pandora/pandora.c
| 3 +-
board/phytec/pcm051/mux.c
| 1 -
board/quantum/u-boot.lds
| 2 +-
board/r360mpi/u-boot.lds
| 2 +-
board/rbc823/u-boot.lds
| 2 +-
board/renesas/sh7752evb/u-boot.lds
| 2 +-
board/renesas/sh7757lcr/u-boot.lds
| 2 +-
board/rsdproto/u-boot.lds
| 2 +-
board/samsung/smdk5250/smdk5250-uboot-spl.lds
| 2 +-
board/samsung/smdk6400/u-boot-nand.lds
| 2 +-
board/sandburst/karef/u-boot.lds.debug
| 2 +-
board/sandburst/metrobox/u-boot.lds.debug
| 2 +-
board/sandpoint/u-boot.lds
| 2 +-
board/sixnet/u-boot.lds
| 2 +-
board/snmc/qs850/u-boot.lds
| 2 +-
board/snmc/qs860t/u-boot.lds
| 2 +-
board/spc1920/u-boot.lds
| 2 +-
board/spd8xx/u-boot.lds
| 2 +-
board/spd8xx/u-boot.lds.debug
| 2 +-
board/stx/stxxtc/u-boot.lds
| 2 +-
board/stx/stxxtc/u-boot.lds.debug
| 2 +-
board/svm_sc8xx/u-boot.lds
| 2 +-
board/technexion/twister/twister.c
| 2 +-
board/teejet/mt_ventoux/mt_ventoux.c
| 4 +-
board/ti/am335x/board.c
| 40 +--
board/ti/am3517crane/am3517crane.c
| 3 +-
board/ti/beagle/beagle.c
| 17 +-
board/ti/beagle/beagle.h
| 6 +- board/{ns9750dev =>
ti/dra7xx}/Makefile | 22 +-
board/ti/dra7xx/evm.c
| 103 +++++++
board/ti/dra7xx/mux_data.h
| 47 +++
board/ti/evm/evm.c
| 3 +-
board/ti/omap5_evm/evm.c
| 4 +-
board/ti/panda/panda.c
| 3 +-
board/ti/sdp3430/sdp.c
| 3 +-
board/ti/sdp4430/sdp.c
| 4 +-
board/timll/devkit8000/devkit8000.c
| 3 +-
board/toradex/colibri_t20_iris/colibri_t20_iris.c
| 11 +-
board/toradex/dts/tegra20-colibri_t20_iris.dts
| 9 +-
board/tqc/tqm8xx/u-boot.lds
| 2 +-
board/v37/u-boot.lds
| 2 +-
board/vpac270/u-boot-spl.lds
| 4 -
board/w7o/u-boot.lds.debug
| 2 +-
board/xes/xpedite1000/u-boot.lds.debug
| 2 +-
boards.cfg
| 12 +
common/cmd_help.c
| 2 +-
common/cmd_led.c
| 6 +-
common/cmd_mmc.c
| 7 +
common/cmd_sata.c
| 2 +-
common/lcd.c
| 41 +++
common/spl/Makefile
| 1 +
common/spl/spl.c
| 10 +
common/spl/spl_onenand.c
| 47 +++
config.mk
| 2 -
disk/part.c
| 10 -
disk/part_amiga.c
| 6 +-
disk/part_dos.c
| 7 +-
disk/part_efi.c
| 8 +-
disk/part_iso.c
| 7 +-
disk/part_mac.c
| 7 +-
doc/README.commands
| 18 +-
doc/README.displaying-bmps
| 27 ++
doc/README.ns9750dev
| 36 ---
doc/README.scrapyard
| 161 +++++-----
doc/SPL/README.am335x-network
| 92 ++++++
doc/driver-model/UDM-serial.txt
| 2 +-
drivers/gpio/da8xx_gpio.c
| 137 ++++++++-
drivers/i2c/tegra_i2c.c
| 42 ++-
drivers/mmc/arm_pl180_mmci.c
| 1 +
drivers/mmc/bfin_sdh.c
| 1 +
drivers/mmc/davinci_mmc.c
| 1 +
drivers/mmc/fsl_esdhc.c
| 1 +
drivers/mmc/ftsdc010_esdhc.c
| 1 +
drivers/mmc/gen_atmel_mci.c
| 1 +
drivers/mmc/mmc.c
| 17 ++
drivers/mmc/mmc_spi.c
| 1 +
drivers/mmc/mxcmmc.c
| 1 +
drivers/mmc/mxsmmc.c
| 21 +-
drivers/mmc/omap_hsmmc.c
| 103 +++++--
drivers/mmc/sdhci.c
| 1 +
drivers/mmc/sh_mmcif.c
| 1 +
drivers/mmc/tegra_mmc.c
| 227 ++++++++++----
drivers/mtd/onenand/onenand_spl.c
| 14 +-
drivers/net/cpsw.c
| 20 +-
drivers/serial/Makefile
| 1 -
drivers/serial/ns9750_serial.c
| 218 --------------
drivers/serial/serial.c
| 2 -
drivers/spi/mxs_spi.c
| 39 ++-
drivers/usb/host/ehci-mx6.c
| 1 -
drivers/usb/host/ehci-mxs.c
| 155 +++++-----
drivers/usb/host/ehci-tegra.c
| 546 +++++++++++++++++++++++++++++++++-
drivers/video/omap3_dss.c
| 2 +-
dts/Makefile
| 3 +-
helper.mk
| 64 ----
include/command.h
| 2 +-
include/config_fallbacks.h
| 11 +
include/configs/am335x_evm.h
| 85 +++++-
include/configs/apx4devkit.h
| 3 +-
include/configs/at91rm9200ek.h
| 3 +
include/configs/at91sam9260ek.h
| 23 +-
include/configs/at91sam9261ek.h
| 19 +-
include/configs/at91sam9263ek.h
| 20 +-
include/configs/at91sam9m10g45ek.h
| 17 +-
include/configs/at91sam9rlek.h
| 3 +
include/configs/at91sam9x5ek.h
| 12 +-
include/configs/cardhu.h
| 12 +-
include/configs/cm_t35.h
| 9 +
include/configs/colibri_t20_iris.h
| 6 -
include/configs/dalmore.h
| 9 +
include/configs/dra7xx_evm.h
| 36 +++
include/configs/ea20.h
| 1 +
include/configs/harmony.h
| 8 -
include/configs/igep00x0.h
| 7 +-
include/configs/m28evk.h
| 5 +-
include/configs/medcom-wide.h
| 5 -
include/configs/mx23_olinuxino.h
| 64 +++-
include/configs/mx23evk.h
| 14 +-
include/configs/mx28evk.h
| 4 +-
include/configs/mx6_common.h
| 23 ++
include/configs/mx6qarm2.h
| 3 +
include/configs/mx6qsabre_common.h
| 4 +
include/configs/mx6qsabrelite.h
| 4 +
include/configs/nitrogen6x.h
| 285 ++++++++++++++++++
include/configs/ns9750dev.h
| 187 ------------
include/configs/omap3_beagle.h
| 3 +-
include/configs/omap3_mvblx.h
| 25 +-
include/configs/omap4_common.h
| 2 +-
include/configs/omap5_common.h
| 262 ++++++++++++++++
include/configs/omap5_evm.h
| 240 +--------------
include/configs/paz00.h
| 8 -
include/configs/pcm051.h
| 2 +-
include/configs/plutux.h
| 5 -
include/configs/sc_sps_1.h
| 3 +-
include/configs/seaboard.h
| 8 -
include/configs/tec.h
| 5 -
include/configs/tegra-common.h
| 23 +-
include/configs/tegra114-common.h
| 3 +
include/configs/tegra20-common.h
| 12 +-
include/configs/tegra30-common.h
| 6 +
include/configs/trimslice.h
| 8 -
include/configs/ventana.h
| 8 -
include/configs/whistler.h
| 8 -
include/configs/zynq.h
| 5 +
include/env_callback.h
| 9 +-
include/fdtdec.h
| 3 +
include/lcd.h
| 1 +
include/linker_lists.h
| 252 ++++++++++++----
include/mmc.h
| 2 +
include/ns9750_bbus.h
| 125 --------
include/ns9750_mem.h
| 172 -----------
include/ns9750_ser.h
| 202 -------------
include/ns9750_sys.h
| 215 --------------
include/spl.h
| 3 +
lib/fdtdec.c
| 3 +
nand_spl/board/freescale/mpc8536ds/Makefile
| 7 +-
nand_spl/board/freescale/mpc8569mds/Makefile
| 7 +-
nand_spl/board/freescale/mpc8572ds/Makefile
| 7 +-
nand_spl/board/freescale/mx31pdk/Makefile
| 7 +-
nand_spl/board/freescale/mx31pdk/u-boot.lds
| 2 +-
nand_spl/board/freescale/p1010rdb/Makefile
| 7 +-
nand_spl/board/freescale/p1023rds/Makefile
| 7 +-
nand_spl/board/freescale/p1_p2_rdb/Makefile
| 7 +-
nand_spl/board/karo/tx25/Makefile
| 7 +-
nand_spl/board/karo/tx25/u-boot.lds
| 2 +-
nand_spl/board/samsung/smdk6400/u-boot.lds
| 2 +-
spl/.gitignore
| 1 -
spl/Makefile
| 10 +- 486 files changed, 15587 insertions(+), 10406 deletions(-)
create mode 100644 arch/arm/cpu/armv7/am33xx/u-boot-spl.lds delete
mode 100644 arch/arm/cpu/armv7/omap4/clocks.c create mode 100644
arch/arm/cpu/armv7/omap4/hw_data.c create mode 100644
arch/arm/cpu/armv7/omap4/prcm-regs.c delete mode 100644
arch/arm/cpu/armv7/omap5/clocks.c create mode 100644
arch/arm/cpu/armv7/omap5/hw_data.c create mode 100644
arch/arm/cpu/armv7/omap5/prcm-regs.c delete mode 100644
arch/arm/cpu/armv7/tegra20/usb.c create mode 100644
arch/arm/cpu/armv7/zynq/slcr.c create mode 100644
arch/arm/cpu/u-boot-spl.lds create mode 100644
arch/arm/include/asm/arch-mx6/mx6-ddr.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6-pins.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6dl-ddr.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6q-ddr.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6q_pins.h delete mode 100644
arch/arm/include/asm/arch-mx6/mx6x_pins.h create mode 100644
arch/arm/include/asm/arch-omap5/mux_dra7xx.h rename
arch/arm/include/asm/{arch-tegra20 => arch-tegra}/usb.h (89%) create
mode 100644 arch/arm/include/asm/arch-zynq/hardware.h rename
arch/arm/{cpu/armv7/mx6/lowlevel_init.S =>
include/asm/arch-zynq/sys_proto.h} (54%) create mode 100644
arch/arm/include/asm/omap_mmc.h create mode 100644 arch/arm/lib/bss.c
create mode 100644 board/avionic-design/dts/tegra20-tamonten.dtsi
create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt create
mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt create
mode 100644
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt create
mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt create mode
100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg create mode
100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg create mode
100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg create mode
100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg create mode
100644 board/boundary/nitrogen6x/Makefile create mode 100644
board/boundary/nitrogen6x/README create mode 100644
board/boundary/nitrogen6x/clocks.cfg create mode 100644
board/boundary/nitrogen6x/ddr-setup.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6dl.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6dl2g.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6q.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6q2g.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6s.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6s1g.cfg create mode 100644
board/boundary/nitrogen6x/nitrogen6x.c create mode 100644
board/cm_t35/display.c delete mode 100644 board/ns9750dev/config.mk
delete mode 100644 board/ns9750dev/flash.c delete mode 100644
board/ns9750dev/led.c delete mode 100644
board/ns9750dev/lowlevel_init.S delete mode 100644
board/ns9750dev/ns9750dev.c delete mode 100644
board/nvidia/cardhu/cardhu.c.mmc rename board/{ns9750dev =>
ti/dra7xx}/Makefile (74%) create mode 100644 board/ti/dra7xx/evm.c
create mode 100644 board/ti/dra7xx/mux_data.h create mode 100644
common/spl/spl_onenand.c create mode 100644 doc/README.displaying-bmps
delete mode 100644 doc/README.ns9750dev create mode 100644
doc/SPL/README.am335x-network delete mode 100644
drivers/serial/ns9750_serial.c delete mode 100644 helper.mk create
mode 100644 include/configs/dra7xx_evm.h create mode 100644
include/configs/mx6_common.h create mode 100644
include/configs/nitrogen6x.h delete mode 100644
include/configs/ns9750dev.h create mode 100644
include/configs/omap5_common.h delete mode 100644
include/ns9750_bbus.h delete mode 100644 include/ns9750_mem.h delete
mode 100644 include/ns9750_ser.h delete mode 100644
include/ns9750_sys.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-02-12 14:25 Albert ARIBAUD
@ 2013-02-15 16:33 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-02-15 16:33 UTC (permalink / raw)
To: u-boot
On Tue, Feb 12, 2013 at 03:25:49PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 3a9d879f6f64585b819af728b53be0a05037fe0d:
>
> Prepare v2013.01 (2013-01-15 14:47:42 -0700)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to fd8e1c3866578d87ed14a04a59faae341fd415df:
>
> arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
> (2013-02-11 10:35:26 -0700)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Allen Martin (13):
> tegra: remove IRDA pinmux synonym
> tegra: fdt: remove clocks nodes
> tegra: fdt: sort dts files
> tegra: fdt: add apbdma node
> fdt: fix dts preprocessor options
> tegra: fdt: add back missing host1x node
> tegra20: fdt: add SPI SFLASH node
> tegra: spi: add fdt support to tegra SPI SFLASH driver
> tegra30: add SBC1 to periph id mapping table
> tegra30: fdt: add SPI SLINK nodes
> tegra: add addresses of SPI SLINK controllers
> tegra: add SPI SLINK driver
> tegra: cardhu: config: enable SPI
>
> Fabio Estevam (4):
> woodburn: Set Write Protection GPIO as input
> mx6qsabre_common: Let mmc partition be board specific
> tools: imximage: Let .name field be more generic
> mxs: Use __weak annotation to simplify code
>
> Javier Martinez Canillas (4):
> OMAP3: use a single board file for IGEP devices
> OMAP3: igep00x0: add boot status GPIO LED
> omap4: allow the use of a plain text env file instead boot scripts
> OMAP3: igep00x0: fix a build warning on IGEP boards
>
> Jeff Lance (1):
> Add DDR3 support for AM335x-EVM (Version 1.5A)
>
> Knut Wohlrab (1):
> mx6qsabreauto: enable USB host interface
>
> Lars Poeschel (3):
> am33xx: add a pulldown macro to pinmux config
> pcm051: Add support for Phytec phyCORE-AM335x
> am335x: display msg when reading MAC from efuse
>
> Lucas Stach (1):
> arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the
> README
>
> Marc Dietrich (3):
> tegra: display: add board pinmux
> tegra: enable LCD on PAZ00
> tegra: remove custom TEGRA_DEVICE_SETTINGS for board files
>
> Marek Vasut (14):
> mxs: mmc: Drop unused members from struct mxsmmc_priv
> mxs: ssp: Pull out the SSP bus to regs conversion
> mx23: Add POWER and CLKCTRL register definitions
> mx23: ssp: Fix ssp-regs.h for MX23
> mmc: Limit the number of used SSP ports on MX23
> mxs: Add function to ungate the power block on MX23
> mxs: Linux uses ttyAMA0 as DUART
> mxs: Add MX23 olinuxino board support
> mxs: Boost the memory power supply
> mxs: dma: Fix APBH DMA driver for MX23
> mxs: ssp: Add SSP registers map for MX23
> mxs: mmc: Allow overriding default card detect implementation
> mxs: mmc: Fix the MMC driver for MX23
> mxs: mmc: mx23_olinuxino: Add MMC support
>
> Otavio Salvador (14):
> mxs: clock: Use 'mxs' prefix for methods
> mx23: Add register base addresses
> mx23: Add iomux-mx23.h
> mx23: Add support on print_cpuinfo()
> mx23: Add boot mode description
> mx23: SPL: Add boot mode support
> mx23: SPL: Initialize DDR at 133MHz
> mx23: config: Enable building of u-boot.sb binary
> mx23: config: Enable mxsboot tool for i.MX23 based boards
> mxs: Fix the memory init for MX23
> mxs: Add MX23 quirks into the clock code
> mxs: mmc: Fix MMC reset on iMX23
> mx23_olinuxino: Add default environment
> mx23evk: Add initial board support
>
> Rob Herring (2):
> ARM: add wfi assembly macro
> ARM: highbank: use wfi macro instead of inline asm
>
> Stephen Warren (2):
> tegra: rename FUNCMUX_UART2_UARTB
> tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS
>
> Tetsuyuki Kobayashi (2):
> arm: rmobile: kzm9g: Adjust SDRAM setting
> arm: rmobile: kzm9g: Adjust ETM trace clock
>
> Thierry Reding (3):
> video: tegra: Update line length to match resolution
> tegra: Enable LCD on Medcom-Wide
> tegra: Enable LCD on TEC
>
> Tom Rini (1):
> am33xx: Drop gpio0_7_pin_mux from phytec pcm051
>
> Tom Warren (19):
> Tegra30: Add arch-tegra30 include files
> Tegra30: Add AVP (arm720t) files
> Tegra30: Add CPU (armv7) files
> Tegra30: Add common CPU (shared) files
> Tegra30: Cardhu: Add DT files
> Tegra30: Add generic Tegra30 build support
> Tegra30: Add/enable Cardhu build (T30 reference board)
> Tegra30: clocks: Fix clock tables for I2C and other periphs
> Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
> Tegra30: I2C: Enable I2C driver on Cardhu
> Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
> Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
> Tegra114: Add arch-tegra114 include files
> Tegra114: Add AVP (arm720t) files
> Tegra114: Add CPU (armv7) files
> Tegra114: Add common CPU (shared) files
> Tegra114: Dalmore: Add DT files
> Tegra114: Add generic Tegra114 build support
> Tegra114: Add/enable Dalmore build (T114 reference board)
>
> Troy Kisky (10):
> imximage.cfg: run files through C preprocessor
> doc/README.fec_mxc: add documentation
> net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
> net: fec_mxc: change fec_mii_setspeed parameter
> net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
> phy: add phy_find_by_mask/phy_connect_dev
> net: fec_mxc: use fec_set_dev_name to set name
> net: fec_mxc: only call phy_connect in fec_probe
> net: fec_mxc: get phydev before fec_probe
> mx6qsabrelite: search mii phy address 4-7
>
> hvaibhav at ti.com (1):
> AM335X: Set fdt_high for AM335X devices to enable booting with
> Device Tree
>
> .gitignore | 1 +
> MAINTAINERS | 8 +
> Makefile | 15 +-
> arch/arm/cpu/arm720t/tegra-common/Makefile | 1 +
> arch/arm/cpu/arm720t/tegra-common/cpu.c | 333 ++++++++++
> arch/arm/cpu/arm720t/tegra-common/cpu.h | 70 +--
> arch/arm/cpu/arm720t/tegra-common/spl.c | 3 +-
> arch/arm/cpu/arm720t/tegra114/Makefile | 42 ++
> arch/arm/cpu/arm720t/tegra114/config.mk | 19 +
> arch/arm/cpu/arm720t/tegra114/cpu.c | 297 +++++++++
> arch/arm/cpu/arm720t/tegra20/cpu.c | 216 +------
> arch/arm/cpu/arm720t/tegra30/Makefile | 41 ++
> arch/arm/cpu/arm720t/tegra30/config.mk | 19 +
> arch/arm/cpu/arm720t/tegra30/cpu.c | 176 ++++++
> arch/arm/cpu/arm926ejs/config.mk | 2 +-
> arch/arm/cpu/arm926ejs/mxs/clock.c | 83 ++-
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 25 +-
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 25 +
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 118 +++-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 12 +
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 +
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/config.mk | 2 +-
> arch/arm/cpu/armv7/start.S | 4 +-
> arch/arm/cpu/armv7/tegra114/Makefile | 40 ++
> arch/arm/cpu/armv7/tegra114/config.mk | 19 +
> arch/arm/cpu/armv7/tegra30/Makefile | 40 ++
> arch/arm/cpu/armv7/tegra30/config.mk | 19 +
> arch/arm/cpu/tegra-common/Makefile | 2 +-
> arch/arm/cpu/tegra-common/ap.c | 23 +-
> arch/arm/cpu/tegra-common/board.c | 58 +-
> arch/arm/cpu/tegra-common/clock.c | 560
> +++++++++++++++++ arch/arm/cpu/tegra-common/sys_info.c
> | 16 +- arch/arm/cpu/tegra114-common/Makefile | 41 ++
> arch/arm/cpu/tegra114-common/clock.c | 655
> ++++++++++++++++++++
> arch/arm/cpu/tegra114-common/funcmux.c | 63 ++
> arch/arm/cpu/tegra114-common/pinmux.c | 506
> +++++++++++++++ arch/arm/cpu/tegra20-common/clock.c |
> 605 +-----------------
> arch/arm/cpu/tegra20-common/funcmux.c | 4 +-
> arch/arm/cpu/tegra20-common/pinmux.c | 2 +-
> arch/arm/cpu/tegra20-common/warmboot.c | 2 +-
> arch/arm/cpu/tegra30-common/Makefile | 44 ++
> arch/arm/cpu/tegra30-common/clock.c | 618
> ++++++++++++++++++ arch/arm/cpu/tegra30-common/funcmux.c
> | 57 ++ arch/arm/cpu/tegra30-common/pinmux.c | 506
> +++++++++++++++ arch/arm/dts/tegra114.dtsi
> | 5 + arch/arm/dts/tegra20.dtsi | 412
> ++++++------ arch/arm/dts/tegra30.dtsi | 165
> +++++ arch/arm/imx-common/Makefile | 13 +
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +
> arch/arm/include/asm/arch-am33xx/mux.h | 3 +-
> arch/arm/include/asm/arch-mxs/clock.h | 14 +-
> arch/arm/include/asm/arch-mxs/imx-regs.h | 7 +-
> arch/arm/include/asm/arch-mxs/iomux-mx23.h | 355 +++++++++++
> arch/arm/include/asm/arch-mxs/regs-apbh.h | 121 ++++
> arch/arm/include/asm/arch-mxs/regs-base.h | 56 +-
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 221 +++++++
> arch/arm/include/asm/arch-mxs/regs-digctl.h | 1 +
> arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 358 +++++++++++
> arch/arm/include/asm/arch-mxs/regs-ssp.h | 54 ++
> arch/arm/include/asm/arch-mxs/sys_proto.h | 20 +-
> arch/arm/include/asm/arch-tegra/ap.h | 52 +-
> arch/arm/include/asm/arch-tegra/board.h | 7 +-
> arch/arm/include/asm/arch-tegra/clk_rst.h | 196 +++++-
> arch/arm/include/asm/arch-tegra/clock.h | 65 +-
> arch/arm/include/asm/arch-tegra/funcmux.h | 39 ++
> arch/arm/include/asm/arch-tegra/gp_padctrl.h | 40 ++
> arch/arm/include/asm/arch-tegra/pmc.h | 8 +
> arch/arm/include/asm/arch-tegra/tegra.h | 19 +-
> arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 +++
> arch/arm/include/asm/arch-tegra114/clock-tables.h | 402 ++++++++++++
> arch/arm/include/asm/arch-tegra114/clock.h | 28 +
> arch/arm/include/asm/arch-tegra114/flow.h | 35 ++
> arch/arm/include/asm/arch-tegra114/funcmux.h | 31 +
> arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 59 ++
> arch/arm/include/asm/arch-tegra114/gpio.h | 30 +
> arch/arm/include/asm/arch-tegra114/hardware.h | 22 +
> arch/arm/include/asm/arch-tegra114/pinmux.h | 618
> ++++++++++++++++++ arch/arm/include/asm/arch-tegra114/pmu.h
> | 23 + arch/arm/include/asm/arch-tegra114/spl.h | 22 +
> arch/arm/include/asm/arch-tegra114/tegra.h | 33 +
> arch/arm/include/asm/arch-tegra20/clock-tables.h | 4 +
> arch/arm/include/asm/arch-tegra20/clock.h | 4 +
> arch/arm/include/asm/arch-tegra20/funcmux.h | 28 +-
> arch/arm/include/asm/arch-tegra20/gp_padctrl.h | 17 +-
> arch/arm/include/asm/arch-tegra20/pinmux.h | 1 -
> arch/arm/include/asm/arch-tegra20/tegra.h | 2 +
> arch/arm/include/asm/arch-tegra30/clock-tables.h | 382 ++++++++++++
> arch/arm/include/asm/arch-tegra30/clock.h | 28 +
> arch/arm/include/asm/arch-tegra30/flow.h | 35 ++
> arch/arm/include/asm/arch-tegra30/funcmux.h | 31 +
> arch/arm/include/asm/arch-tegra30/gp_padctrl.h | 59 ++
> arch/arm/include/asm/arch-tegra30/gpio.h | 304 +++++++++
> arch/arm/include/asm/arch-tegra30/hardware.h | 22 +
> arch/arm/include/asm/arch-tegra30/pinmux.h | 603
> ++++++++++++++++++ arch/arm/include/asm/arch-tegra30/pmu.h
> | 23 + arch/arm/include/asm/arch-tegra30/spl.h | 28 +
> arch/arm/include/asm/arch-tegra30/tegra.h | 28 +
> arch/arm/include/asm/system.h | 6 +
> arch/arm/lib/board.c | 2 +-
> board/avionic-design/dts/tegra20-medcom-wide.dts | 38 +-
> board/avionic-design/dts/tegra20-plutux.dts | 14 -
> board/avionic-design/dts/tegra20-tec.dts | 56 +-
> board/bluegiga/apx4devkit/apx4devkit.c | 8 +-
> board/compal/dts/tegra20-paz00.dts | 39 +-
> board/compal/paz00/paz00.c | 11 +
> board/compulab/dts/tegra20-trimslice.dts | 18 +-
> board/denx/m28evk/m28evk.c | 10 +-
> board/esg/ima3-mx53/imximage.cfg | 120 ++--
> board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90
> +-- .../{isee/igep0030 => freescale/mx23evk}/Makefile | 8 +-
> board/freescale/mx23evk/mx23evk.c | 83 +++
> board/freescale/mx23evk/spl_boot.c | 104 ++++
> board/freescale/mx25pdk/imximage.cfg | 77 +--
> board/freescale/mx28evk/mx28evk.c | 10 +-
> board/freescale/mx51evk/imximage.cfg | 114 ++--
> board/freescale/mx53ard/imximage_dd3.cfg | 83 +--
> board/freescale/mx53evk/imximage.cfg | 86 +--
> board/freescale/mx53loco/imximage.cfg | 83 +--
> board/freescale/mx53smd/imximage.cfg | 83 +--
> board/freescale/mx6qarm2/imximage.cfg | 88 +--
> board/freescale/mx6qsabreauto/imximage.cfg | 82 +--
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
> board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++--
> board/genesi/mx51_efikamx/imximage_sb.cfg | 126 ++--
> board/highbank/highbank.c | 3 +-
> board/isee/igep0020/igep0020.h | 151 -----
> board/isee/igep0030/igep0030.c | 117 ----
> board/isee/{igep0020 => igep00x0}/Makefile | 2
> +- .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51
> +- .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 +-
> board/kmc/kzm9g/kzm9g.c | 19 +-
> board/nvidia/cardhu/Makefile | 44 ++
> board/nvidia/cardhu/cardhu.c | 39 ++
> board/nvidia/cardhu/cardhu.c.mmc | 151 +++++
> board/nvidia/cardhu/pinmux-config-cardhu.h | 329 ++++++++++
> board/nvidia/common/board.c | 27 +-
> board/nvidia/dalmore/Makefile | 36 ++
> board/nvidia/dalmore/dalmore.c | 32 +
> board/nvidia/dalmore/pinmux-config-dalmore.h | 249 ++++++++
> board/nvidia/dts/tegra114-dalmore.dts | 13 +
> board/nvidia/dts/tegra20-harmony.dts | 33 +-
> board/nvidia/dts/tegra20-seaboard.dts | 129 ++--
> board/nvidia/dts/tegra20-ventana.dts | 13 -
> board/nvidia/dts/tegra20-whistler.dts | 10 -
> board/nvidia/dts/tegra30-cardhu.dts | 47 ++
> board/olimex/mx23_olinuxino/Makefile | 47 ++
> board/olimex/mx23_olinuxino/mx23_olinuxino.c | 71 +++
> board/olimex/mx23_olinuxino/spl_boot.c | 99 +++
> board/phytec/pcm051/Makefile | 46 ++
> board/phytec/pcm051/board.c | 266 ++++++++
> board/phytec/pcm051/board.h | 33 +
> board/phytec/pcm051/mux.c | 128 ++++
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 10 +-
> board/ti/am335x/board.c | 43 +-
> board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++-----
> board/woodburn/imximage.cfg | 2 +-
> board/woodburn/woodburn.c | 3 +-
> boards.cfg | 13 +-
> doc/README.fec_mxc | 27 +
> drivers/dma/apbh_dma.c | 10 +-
> drivers/mmc/mxsmmc.c | 102 +--
> drivers/net/fec_mxc.c | 164 ++---
> drivers/net/fec_mxc.h | 2 +-
> drivers/net/phy/phy.c | 128 ++--
> drivers/spi/Makefile | 1 +
> drivers/spi/mxs_spi.c | 7 +-
> drivers/spi/tegra_slink.c | 343 ++++++++++
> drivers/spi/tegra_spi.c | 45 +-
> drivers/video/tegra.c | 4 +-
> dts/Makefile | 2 +-
> include/configs/am335x_evm.h | 1 +
> include/configs/cardhu.h | 65 ++
> include/configs/dalmore.h | 50 ++
> include/configs/igep00x0.h | 5 +
> include/configs/m28evk.h | 3 +-
> include/configs/medcom-wide.h | 8 +
> include/configs/mx23_olinuxino.h | 210 +++++++
> include/configs/mx23evk.h | 202 ++++++
> include/configs/mx28evk.h | 1 -
> include/configs/mx6qsabre_common.h | 2 +-
> include/configs/mx6qsabreauto.h | 12 +
> include/configs/omap4_common.h | 17 +-
> include/configs/paz00.h | 9 +
> include/configs/pcm051.h | 301 +++++++++
> include/configs/sc_sps_1.h | 1 -
> include/configs/tec.h | 9 +-
> include/configs/tegra-common-post.h | 38 +-
> include/configs/tegra-common.h | 160 +++++
> include/configs/tegra114-common.h | 79 +++
> include/configs/tegra20-common.h | 201 ++----
> include/configs/tegra30-common.h | 89 +++
> include/fdtdec.h | 2 +
> include/netdev.h | 7 +
> include/phy.h | 3 +
> include/serial.h | 2 +-
> lib/fdtdec.c | 2 +
> spl/Makefile | 9 +-
> tools/Makefile | 2 +
> tools/imximage.c | 2 +- 200 files
> changed, 14371 insertions(+), 2800 deletions(-) create mode 100644
> arch/arm/cpu/arm720t/tegra-common/cpu.c create mode 100644
> arch/arm/cpu/arm720t/tegra114/Makefile create mode 100644
> arch/arm/cpu/arm720t/tegra114/config.mk create mode 100644
> arch/arm/cpu/arm720t/tegra114/cpu.c create mode 100644
> arch/arm/cpu/arm720t/tegra30/Makefile create mode 100644
> arch/arm/cpu/arm720t/tegra30/config.mk create mode 100644
> arch/arm/cpu/arm720t/tegra30/cpu.c create mode 100644
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd create mode 100644
> arch/arm/cpu/armv7/tegra114/Makefile create mode 100644
> arch/arm/cpu/armv7/tegra114/config.mk create mode 100644
> arch/arm/cpu/armv7/tegra30/Makefile create mode 100644
> arch/arm/cpu/armv7/tegra30/config.mk create mode 100644
> arch/arm/cpu/tegra-common/clock.c create mode 100644
> arch/arm/cpu/tegra114-common/Makefile create mode 100644
> arch/arm/cpu/tegra114-common/clock.c create mode 100644
> arch/arm/cpu/tegra114-common/funcmux.c create mode 100644
> arch/arm/cpu/tegra114-common/pinmux.c create mode 100644
> arch/arm/cpu/tegra30-common/Makefile create mode 100644
> arch/arm/cpu/tegra30-common/clock.c create mode 100644
> arch/arm/cpu/tegra30-common/funcmux.c create mode 100644
> arch/arm/cpu/tegra30-common/pinmux.c create mode 100644
> arch/arm/dts/tegra114.dtsi create mode 100644
> arch/arm/dts/tegra30.dtsi create mode 100644
> arch/arm/include/asm/arch-mxs/iomux-mx23.h create mode 100644
> arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h create mode 100644
> arch/arm/include/asm/arch-mxs/regs-power-mx23.h create mode 100644
> arch/arm/include/asm/arch-tegra/funcmux.h create mode 100644
> arch/arm/include/asm/arch-tegra/gp_padctrl.h create mode 100644
> arch/arm/include/asm/arch-tegra/tegra_slink.h create mode 100644
> arch/arm/include/asm/arch-tegra114/clock-tables.h create mode 100644
> arch/arm/include/asm/arch-tegra114/clock.h create mode 100644
> arch/arm/include/asm/arch-tegra114/flow.h create mode 100644
> arch/arm/include/asm/arch-tegra114/funcmux.h create mode 100644
> arch/arm/include/asm/arch-tegra114/gp_padctrl.h create mode 100644
> arch/arm/include/asm/arch-tegra114/gpio.h create mode 100644
> arch/arm/include/asm/arch-tegra114/hardware.h create mode 100644
> arch/arm/include/asm/arch-tegra114/pinmux.h create mode 100644
> arch/arm/include/asm/arch-tegra114/pmu.h create mode 100644
> arch/arm/include/asm/arch-tegra114/spl.h create mode 100644
> arch/arm/include/asm/arch-tegra114/tegra.h create mode 100644
> arch/arm/include/asm/arch-tegra30/clock-tables.h create mode 100644
> arch/arm/include/asm/arch-tegra30/clock.h create mode 100644
> arch/arm/include/asm/arch-tegra30/flow.h create mode 100644
> arch/arm/include/asm/arch-tegra30/funcmux.h create mode 100644
> arch/arm/include/asm/arch-tegra30/gp_padctrl.h create mode 100644
> arch/arm/include/asm/arch-tegra30/gpio.h create mode 100644
> arch/arm/include/asm/arch-tegra30/hardware.h create mode 100644
> arch/arm/include/asm/arch-tegra30/pinmux.h create mode 100644
> arch/arm/include/asm/arch-tegra30/pmu.h create mode 100644
> arch/arm/include/asm/arch-tegra30/spl.h create mode 100644
> arch/arm/include/asm/arch-tegra30/tegra.h rename board/{isee/igep0030
> => freescale/mx23evk}/Makefile (92%) create mode 100644
> board/freescale/mx23evk/mx23evk.c create mode 100644
> board/freescale/mx23evk/spl_boot.c delete mode 100644
> board/isee/igep0020/igep0020.h delete mode 100644
> board/isee/igep0030/igep0030.c rename board/isee/{igep0020 =>
> igep00x0}/Makefile (98%) rename board/isee/{igep0020/igep0020.c =>
> igep00x0/igep00x0.c} (86%) rename board/isee/{igep0030/igep0030.h =>
> igep00x0/igep00x0.h} (93%) create mode 100644
> board/nvidia/cardhu/Makefile create mode 100644
> board/nvidia/cardhu/cardhu.c create mode 100644
> board/nvidia/cardhu/cardhu.c.mmc create mode 100644
> board/nvidia/cardhu/pinmux-config-cardhu.h create mode 100644
> board/nvidia/dalmore/Makefile create mode 100644
> board/nvidia/dalmore/dalmore.c create mode 100644
> board/nvidia/dalmore/pinmux-config-dalmore.h create mode 100644
> board/nvidia/dts/tegra114-dalmore.dts create mode 100644
> board/nvidia/dts/tegra30-cardhu.dts create mode 100644
> board/olimex/mx23_olinuxino/Makefile create mode 100644
> board/olimex/mx23_olinuxino/mx23_olinuxino.c create mode 100644
> board/olimex/mx23_olinuxino/spl_boot.c create mode 100644
> board/phytec/pcm051/Makefile create mode 100644
> board/phytec/pcm051/board.c create mode 100644
> board/phytec/pcm051/board.h create mode 100644
> board/phytec/pcm051/mux.c create mode 100644 doc/README.fec_mxc create
> mode 100644 drivers/spi/tegra_slink.c create mode 100644
> include/configs/cardhu.h create mode 100644 include/configs/dalmore.h
> create mode 100644 include/configs/mx23_olinuxino.h
> create mode 100644 include/configs/mx23evk.h
> create mode 100644 include/configs/pcm051.h
> create mode 100644 include/configs/tegra-common.h
> create mode 100644 include/configs/tegra114-common.h
> create mode 100644 include/configs/tegra30-common.h
Applied to u-boot/master (a few days ago and forgot to send this), thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130215/47b3fc2d/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-02-12 14:25 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
3a9d879f6f64585b819af728b53be0a05037fe0d:
Prepare v2013.01 (2013-01-15 14:47:42 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to fd8e1c3866578d87ed14a04a59faae341fd415df:
arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
(2013-02-11 10:35:26 -0700)
----------------------------------------------------------------
Albert ARIBAUD (1):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Allen Martin (13):
tegra: remove IRDA pinmux synonym
tegra: fdt: remove clocks nodes
tegra: fdt: sort dts files
tegra: fdt: add apbdma node
fdt: fix dts preprocessor options
tegra: fdt: add back missing host1x node
tegra20: fdt: add SPI SFLASH node
tegra: spi: add fdt support to tegra SPI SFLASH driver
tegra30: add SBC1 to periph id mapping table
tegra30: fdt: add SPI SLINK nodes
tegra: add addresses of SPI SLINK controllers
tegra: add SPI SLINK driver
tegra: cardhu: config: enable SPI
Fabio Estevam (4):
woodburn: Set Write Protection GPIO as input
mx6qsabre_common: Let mmc partition be board specific
tools: imximage: Let .name field be more generic
mxs: Use __weak annotation to simplify code
Javier Martinez Canillas (4):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scripts
OMAP3: igep00x0: fix a build warning on IGEP boards
Jeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)
Knut Wohlrab (1):
mx6qsabreauto: enable USB host interface
Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efuse
Lucas Stach (1):
arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the
README
Marc Dietrich (3):
tegra: display: add board pinmux
tegra: enable LCD on PAZ00
tegra: remove custom TEGRA_DEVICE_SETTINGS for board files
Marek Vasut (14):
mxs: mmc: Drop unused members from struct mxsmmc_priv
mxs: ssp: Pull out the SSP bus to regs conversion
mx23: Add POWER and CLKCTRL register definitions
mx23: ssp: Fix ssp-regs.h for MX23
mmc: Limit the number of used SSP ports on MX23
mxs: Add function to ungate the power block on MX23
mxs: Linux uses ttyAMA0 as DUART
mxs: Add MX23 olinuxino board support
mxs: Boost the memory power supply
mxs: dma: Fix APBH DMA driver for MX23
mxs: ssp: Add SSP registers map for MX23
mxs: mmc: Allow overriding default card detect implementation
mxs: mmc: Fix the MMC driver for MX23
mxs: mmc: mx23_olinuxino: Add MMC support
Otavio Salvador (14):
mxs: clock: Use 'mxs' prefix for methods
mx23: Add register base addresses
mx23: Add iomux-mx23.h
mx23: Add support on print_cpuinfo()
mx23: Add boot mode description
mx23: SPL: Add boot mode support
mx23: SPL: Initialize DDR at 133MHz
mx23: config: Enable building of u-boot.sb binary
mx23: config: Enable mxsboot tool for i.MX23 based boards
mxs: Fix the memory init for MX23
mxs: Add MX23 quirks into the clock code
mxs: mmc: Fix MMC reset on iMX23
mx23_olinuxino: Add default environment
mx23evk: Add initial board support
Rob Herring (2):
ARM: add wfi assembly macro
ARM: highbank: use wfi macro instead of inline asm
Stephen Warren (2):
tegra: rename FUNCMUX_UART2_UARTB
tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS
Tetsuyuki Kobayashi (2):
arm: rmobile: kzm9g: Adjust SDRAM setting
arm: rmobile: kzm9g: Adjust ETM trace clock
Thierry Reding (3):
video: tegra: Update line length to match resolution
tegra: Enable LCD on Medcom-Wide
tegra: Enable LCD on TEC
Tom Rini (1):
am33xx: Drop gpio0_7_pin_mux from phytec pcm051
Tom Warren (19):
Tegra30: Add arch-tegra30 include files
Tegra30: Add AVP (arm720t) files
Tegra30: Add CPU (armv7) files
Tegra30: Add common CPU (shared) files
Tegra30: Cardhu: Add DT files
Tegra30: Add generic Tegra30 build support
Tegra30: Add/enable Cardhu build (T30 reference board)
Tegra30: clocks: Fix clock tables for I2C and other periphs
Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
Tegra30: I2C: Enable I2C driver on Cardhu
Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
Tegra114: Add arch-tegra114 include files
Tegra114: Add AVP (arm720t) files
Tegra114: Add CPU (armv7) files
Tegra114: Add common CPU (shared) files
Tegra114: Dalmore: Add DT files
Tegra114: Add generic Tegra114 build support
Tegra114: Add/enable Dalmore build (T114 reference board)
Troy Kisky (10):
imximage.cfg: run files through C preprocessor
doc/README.fec_mxc: add documentation
net: fec_mxc: delete CONFIG_FEC_MXC_MULTI
net: fec_mxc: change fec_mii_setspeed parameter
net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi
phy: add phy_find_by_mask/phy_connect_dev
net: fec_mxc: use fec_set_dev_name to set name
net: fec_mxc: only call phy_connect in fec_probe
net: fec_mxc: get phydev before fec_probe
mx6qsabrelite: search mii phy address 4-7
hvaibhav at ti.com (1):
AM335X: Set fdt_high for AM335X devices to enable booting with
Device Tree
.gitignore | 1 +
MAINTAINERS | 8 +
Makefile | 15 +-
arch/arm/cpu/arm720t/tegra-common/Makefile | 1 +
arch/arm/cpu/arm720t/tegra-common/cpu.c | 333 ++++++++++
arch/arm/cpu/arm720t/tegra-common/cpu.h | 70 +--
arch/arm/cpu/arm720t/tegra-common/spl.c | 3 +-
arch/arm/cpu/arm720t/tegra114/Makefile | 42 ++
arch/arm/cpu/arm720t/tegra114/config.mk | 19 +
arch/arm/cpu/arm720t/tegra114/cpu.c | 297 +++++++++
arch/arm/cpu/arm720t/tegra20/cpu.c | 216 +------
arch/arm/cpu/arm720t/tegra30/Makefile | 41 ++
arch/arm/cpu/arm720t/tegra30/config.mk | 19 +
arch/arm/cpu/arm720t/tegra30/cpu.c | 176 ++++++
arch/arm/cpu/arm926ejs/config.mk | 2 +-
arch/arm/cpu/arm926ejs/mxs/clock.c | 83 ++-
arch/arm/cpu/arm926ejs/mxs/mxs.c | 25 +-
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 25 +
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 118 +++-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 12 +
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 +
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/config.mk | 2 +-
arch/arm/cpu/armv7/start.S | 4 +-
arch/arm/cpu/armv7/tegra114/Makefile | 40 ++
arch/arm/cpu/armv7/tegra114/config.mk | 19 +
arch/arm/cpu/armv7/tegra30/Makefile | 40 ++
arch/arm/cpu/armv7/tegra30/config.mk | 19 +
arch/arm/cpu/tegra-common/Makefile | 2 +-
arch/arm/cpu/tegra-common/ap.c | 23 +-
arch/arm/cpu/tegra-common/board.c | 58 +-
arch/arm/cpu/tegra-common/clock.c | 560
+++++++++++++++++ arch/arm/cpu/tegra-common/sys_info.c
| 16 +- arch/arm/cpu/tegra114-common/Makefile | 41 ++
arch/arm/cpu/tegra114-common/clock.c | 655
++++++++++++++++++++
arch/arm/cpu/tegra114-common/funcmux.c | 63 ++
arch/arm/cpu/tegra114-common/pinmux.c | 506
+++++++++++++++ arch/arm/cpu/tegra20-common/clock.c |
605 +-----------------
arch/arm/cpu/tegra20-common/funcmux.c | 4 +-
arch/arm/cpu/tegra20-common/pinmux.c | 2 +-
arch/arm/cpu/tegra20-common/warmboot.c | 2 +-
arch/arm/cpu/tegra30-common/Makefile | 44 ++
arch/arm/cpu/tegra30-common/clock.c | 618
++++++++++++++++++ arch/arm/cpu/tegra30-common/funcmux.c
| 57 ++ arch/arm/cpu/tegra30-common/pinmux.c | 506
+++++++++++++++ arch/arm/dts/tegra114.dtsi
| 5 + arch/arm/dts/tegra20.dtsi | 412
++++++------ arch/arm/dts/tegra30.dtsi | 165
+++++ arch/arm/imx-common/Makefile | 13 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +
arch/arm/include/asm/arch-am33xx/mux.h | 3 +-
arch/arm/include/asm/arch-mxs/clock.h | 14 +-
arch/arm/include/asm/arch-mxs/imx-regs.h | 7 +-
arch/arm/include/asm/arch-mxs/iomux-mx23.h | 355 +++++++++++
arch/arm/include/asm/arch-mxs/regs-apbh.h | 121 ++++
arch/arm/include/asm/arch-mxs/regs-base.h | 56 +-
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 221 +++++++
arch/arm/include/asm/arch-mxs/regs-digctl.h | 1 +
arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 358 +++++++++++
arch/arm/include/asm/arch-mxs/regs-ssp.h | 54 ++
arch/arm/include/asm/arch-mxs/sys_proto.h | 20 +-
arch/arm/include/asm/arch-tegra/ap.h | 52 +-
arch/arm/include/asm/arch-tegra/board.h | 7 +-
arch/arm/include/asm/arch-tegra/clk_rst.h | 196 +++++-
arch/arm/include/asm/arch-tegra/clock.h | 65 +-
arch/arm/include/asm/arch-tegra/funcmux.h | 39 ++
arch/arm/include/asm/arch-tegra/gp_padctrl.h | 40 ++
arch/arm/include/asm/arch-tegra/pmc.h | 8 +
arch/arm/include/asm/arch-tegra/tegra.h | 19 +-
arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 +++
arch/arm/include/asm/arch-tegra114/clock-tables.h | 402 ++++++++++++
arch/arm/include/asm/arch-tegra114/clock.h | 28 +
arch/arm/include/asm/arch-tegra114/flow.h | 35 ++
arch/arm/include/asm/arch-tegra114/funcmux.h | 31 +
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 59 ++
arch/arm/include/asm/arch-tegra114/gpio.h | 30 +
arch/arm/include/asm/arch-tegra114/hardware.h | 22 +
arch/arm/include/asm/arch-tegra114/pinmux.h | 618
++++++++++++++++++ arch/arm/include/asm/arch-tegra114/pmu.h
| 23 + arch/arm/include/asm/arch-tegra114/spl.h | 22 +
arch/arm/include/asm/arch-tegra114/tegra.h | 33 +
arch/arm/include/asm/arch-tegra20/clock-tables.h | 4 +
arch/arm/include/asm/arch-tegra20/clock.h | 4 +
arch/arm/include/asm/arch-tegra20/funcmux.h | 28 +-
arch/arm/include/asm/arch-tegra20/gp_padctrl.h | 17 +-
arch/arm/include/asm/arch-tegra20/pinmux.h | 1 -
arch/arm/include/asm/arch-tegra20/tegra.h | 2 +
arch/arm/include/asm/arch-tegra30/clock-tables.h | 382 ++++++++++++
arch/arm/include/asm/arch-tegra30/clock.h | 28 +
arch/arm/include/asm/arch-tegra30/flow.h | 35 ++
arch/arm/include/asm/arch-tegra30/funcmux.h | 31 +
arch/arm/include/asm/arch-tegra30/gp_padctrl.h | 59 ++
arch/arm/include/asm/arch-tegra30/gpio.h | 304 +++++++++
arch/arm/include/asm/arch-tegra30/hardware.h | 22 +
arch/arm/include/asm/arch-tegra30/pinmux.h | 603
++++++++++++++++++ arch/arm/include/asm/arch-tegra30/pmu.h
| 23 + arch/arm/include/asm/arch-tegra30/spl.h | 28 +
arch/arm/include/asm/arch-tegra30/tegra.h | 28 +
arch/arm/include/asm/system.h | 6 +
arch/arm/lib/board.c | 2 +-
board/avionic-design/dts/tegra20-medcom-wide.dts | 38 +-
board/avionic-design/dts/tegra20-plutux.dts | 14 -
board/avionic-design/dts/tegra20-tec.dts | 56 +-
board/bluegiga/apx4devkit/apx4devkit.c | 8 +-
board/compal/dts/tegra20-paz00.dts | 39 +-
board/compal/paz00/paz00.c | 11 +
board/compulab/dts/tegra20-trimslice.dts | 18 +-
board/denx/m28evk/m28evk.c | 10 +-
board/esg/ima3-mx53/imximage.cfg | 120 ++--
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90
+-- .../{isee/igep0030 => freescale/mx23evk}/Makefile | 8 +-
board/freescale/mx23evk/mx23evk.c | 83 +++
board/freescale/mx23evk/spl_boot.c | 104 ++++
board/freescale/mx25pdk/imximage.cfg | 77 +--
board/freescale/mx28evk/mx28evk.c | 10 +-
board/freescale/mx51evk/imximage.cfg | 114 ++--
board/freescale/mx53ard/imximage_dd3.cfg | 83 +--
board/freescale/mx53evk/imximage.cfg | 86 +--
board/freescale/mx53loco/imximage.cfg | 83 +--
board/freescale/mx53smd/imximage.cfg | 83 +--
board/freescale/mx6qarm2/imximage.cfg | 88 +--
board/freescale/mx6qsabreauto/imximage.cfg | 82 +--
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++--
board/genesi/mx51_efikamx/imximage_sb.cfg | 126 ++--
board/highbank/highbank.c | 3 +-
board/isee/igep0020/igep0020.h | 151 -----
board/isee/igep0030/igep0030.c | 117 ----
board/isee/{igep0020 => igep00x0}/Makefile | 2
+- .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51
+- .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 +-
board/kmc/kzm9g/kzm9g.c | 19 +-
board/nvidia/cardhu/Makefile | 44 ++
board/nvidia/cardhu/cardhu.c | 39 ++
board/nvidia/cardhu/cardhu.c.mmc | 151 +++++
board/nvidia/cardhu/pinmux-config-cardhu.h | 329 ++++++++++
board/nvidia/common/board.c | 27 +-
board/nvidia/dalmore/Makefile | 36 ++
board/nvidia/dalmore/dalmore.c | 32 +
board/nvidia/dalmore/pinmux-config-dalmore.h | 249 ++++++++
board/nvidia/dts/tegra114-dalmore.dts | 13 +
board/nvidia/dts/tegra20-harmony.dts | 33 +-
board/nvidia/dts/tegra20-seaboard.dts | 129 ++--
board/nvidia/dts/tegra20-ventana.dts | 13 -
board/nvidia/dts/tegra20-whistler.dts | 10 -
board/nvidia/dts/tegra30-cardhu.dts | 47 ++
board/olimex/mx23_olinuxino/Makefile | 47 ++
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 71 +++
board/olimex/mx23_olinuxino/spl_boot.c | 99 +++
board/phytec/pcm051/Makefile | 46 ++
board/phytec/pcm051/board.c | 266 ++++++++
board/phytec/pcm051/board.h | 33 +
board/phytec/pcm051/mux.c | 128 ++++
board/schulercontrol/sc_sps_1/sc_sps_1.c | 10 +-
board/ti/am335x/board.c | 43 +-
board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++-----
board/woodburn/imximage.cfg | 2 +-
board/woodburn/woodburn.c | 3 +-
boards.cfg | 13 +-
doc/README.fec_mxc | 27 +
drivers/dma/apbh_dma.c | 10 +-
drivers/mmc/mxsmmc.c | 102 +--
drivers/net/fec_mxc.c | 164 ++---
drivers/net/fec_mxc.h | 2 +-
drivers/net/phy/phy.c | 128 ++--
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 7 +-
drivers/spi/tegra_slink.c | 343 ++++++++++
drivers/spi/tegra_spi.c | 45 +-
drivers/video/tegra.c | 4 +-
dts/Makefile | 2 +-
include/configs/am335x_evm.h | 1 +
include/configs/cardhu.h | 65 ++
include/configs/dalmore.h | 50 ++
include/configs/igep00x0.h | 5 +
include/configs/m28evk.h | 3 +-
include/configs/medcom-wide.h | 8 +
include/configs/mx23_olinuxino.h | 210 +++++++
include/configs/mx23evk.h | 202 ++++++
include/configs/mx28evk.h | 1 -
include/configs/mx6qsabre_common.h | 2 +-
include/configs/mx6qsabreauto.h | 12 +
include/configs/omap4_common.h | 17 +-
include/configs/paz00.h | 9 +
include/configs/pcm051.h | 301 +++++++++
include/configs/sc_sps_1.h | 1 -
include/configs/tec.h | 9 +-
include/configs/tegra-common-post.h | 38 +-
include/configs/tegra-common.h | 160 +++++
include/configs/tegra114-common.h | 79 +++
include/configs/tegra20-common.h | 201 ++----
include/configs/tegra30-common.h | 89 +++
include/fdtdec.h | 2 +
include/netdev.h | 7 +
include/phy.h | 3 +
include/serial.h | 2 +-
lib/fdtdec.c | 2 +
spl/Makefile | 9 +-
tools/Makefile | 2 +
tools/imximage.c | 2 +- 200 files
changed, 14371 insertions(+), 2800 deletions(-) create mode 100644
arch/arm/cpu/arm720t/tegra-common/cpu.c create mode 100644
arch/arm/cpu/arm720t/tegra114/Makefile create mode 100644
arch/arm/cpu/arm720t/tegra114/config.mk create mode 100644
arch/arm/cpu/arm720t/tegra114/cpu.c create mode 100644
arch/arm/cpu/arm720t/tegra30/Makefile create mode 100644
arch/arm/cpu/arm720t/tegra30/config.mk create mode 100644
arch/arm/cpu/arm720t/tegra30/cpu.c create mode 100644
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd create mode 100644
arch/arm/cpu/armv7/tegra114/Makefile create mode 100644
arch/arm/cpu/armv7/tegra114/config.mk create mode 100644
arch/arm/cpu/armv7/tegra30/Makefile create mode 100644
arch/arm/cpu/armv7/tegra30/config.mk create mode 100644
arch/arm/cpu/tegra-common/clock.c create mode 100644
arch/arm/cpu/tegra114-common/Makefile create mode 100644
arch/arm/cpu/tegra114-common/clock.c create mode 100644
arch/arm/cpu/tegra114-common/funcmux.c create mode 100644
arch/arm/cpu/tegra114-common/pinmux.c create mode 100644
arch/arm/cpu/tegra30-common/Makefile create mode 100644
arch/arm/cpu/tegra30-common/clock.c create mode 100644
arch/arm/cpu/tegra30-common/funcmux.c create mode 100644
arch/arm/cpu/tegra30-common/pinmux.c create mode 100644
arch/arm/dts/tegra114.dtsi create mode 100644
arch/arm/dts/tegra30.dtsi create mode 100644
arch/arm/include/asm/arch-mxs/iomux-mx23.h create mode 100644
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h create mode 100644
arch/arm/include/asm/arch-mxs/regs-power-mx23.h create mode 100644
arch/arm/include/asm/arch-tegra/funcmux.h create mode 100644
arch/arm/include/asm/arch-tegra/gp_padctrl.h create mode 100644
arch/arm/include/asm/arch-tegra/tegra_slink.h create mode 100644
arch/arm/include/asm/arch-tegra114/clock-tables.h create mode 100644
arch/arm/include/asm/arch-tegra114/clock.h create mode 100644
arch/arm/include/asm/arch-tegra114/flow.h create mode 100644
arch/arm/include/asm/arch-tegra114/funcmux.h create mode 100644
arch/arm/include/asm/arch-tegra114/gp_padctrl.h create mode 100644
arch/arm/include/asm/arch-tegra114/gpio.h create mode 100644
arch/arm/include/asm/arch-tegra114/hardware.h create mode 100644
arch/arm/include/asm/arch-tegra114/pinmux.h create mode 100644
arch/arm/include/asm/arch-tegra114/pmu.h create mode 100644
arch/arm/include/asm/arch-tegra114/spl.h create mode 100644
arch/arm/include/asm/arch-tegra114/tegra.h create mode 100644
arch/arm/include/asm/arch-tegra30/clock-tables.h create mode 100644
arch/arm/include/asm/arch-tegra30/clock.h create mode 100644
arch/arm/include/asm/arch-tegra30/flow.h create mode 100644
arch/arm/include/asm/arch-tegra30/funcmux.h create mode 100644
arch/arm/include/asm/arch-tegra30/gp_padctrl.h create mode 100644
arch/arm/include/asm/arch-tegra30/gpio.h create mode 100644
arch/arm/include/asm/arch-tegra30/hardware.h create mode 100644
arch/arm/include/asm/arch-tegra30/pinmux.h create mode 100644
arch/arm/include/asm/arch-tegra30/pmu.h create mode 100644
arch/arm/include/asm/arch-tegra30/spl.h create mode 100644
arch/arm/include/asm/arch-tegra30/tegra.h rename board/{isee/igep0030
=> freescale/mx23evk}/Makefile (92%) create mode 100644
board/freescale/mx23evk/mx23evk.c create mode 100644
board/freescale/mx23evk/spl_boot.c delete mode 100644
board/isee/igep0020/igep0020.h delete mode 100644
board/isee/igep0030/igep0030.c rename board/isee/{igep0020 =>
igep00x0}/Makefile (98%) rename board/isee/{igep0020/igep0020.c =>
igep00x0/igep00x0.c} (86%) rename board/isee/{igep0030/igep0030.h =>
igep00x0/igep00x0.h} (93%) create mode 100644
board/nvidia/cardhu/Makefile create mode 100644
board/nvidia/cardhu/cardhu.c create mode 100644
board/nvidia/cardhu/cardhu.c.mmc create mode 100644
board/nvidia/cardhu/pinmux-config-cardhu.h create mode 100644
board/nvidia/dalmore/Makefile create mode 100644
board/nvidia/dalmore/dalmore.c create mode 100644
board/nvidia/dalmore/pinmux-config-dalmore.h create mode 100644
board/nvidia/dts/tegra114-dalmore.dts create mode 100644
board/nvidia/dts/tegra30-cardhu.dts create mode 100644
board/olimex/mx23_olinuxino/Makefile create mode 100644
board/olimex/mx23_olinuxino/mx23_olinuxino.c create mode 100644
board/olimex/mx23_olinuxino/spl_boot.c create mode 100644
board/phytec/pcm051/Makefile create mode 100644
board/phytec/pcm051/board.c create mode 100644
board/phytec/pcm051/board.h create mode 100644
board/phytec/pcm051/mux.c create mode 100644 doc/README.fec_mxc create
mode 100644 drivers/spi/tegra_slink.c create mode 100644
include/configs/cardhu.h create mode 100644 include/configs/dalmore.h
create mode 100644 include/configs/mx23_olinuxino.h
create mode 100644 include/configs/mx23evk.h
create mode 100644 include/configs/pcm051.h
create mode 100644 include/configs/tegra-common.h
create mode 100644 include/configs/tegra114-common.h
create mode 100644 include/configs/tegra30-common.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-14 16:58 Albert ARIBAUD
@ 2013-01-14 23:18 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-01-14 23:18 UTC (permalink / raw)
To: u-boot
On Mon, Jan 14, 2013 at 05:58:39PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> fd70aa41468be4324275910f85578cb5be6a0439:
>
> m68k/lib: fix serial driver relocation (2013-01-11 14:41:14 -0700)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> for you to fetch changes up to a17617d6553369ba72c080128ed8d0b0c33dfc89:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-14
> 17:00:02 +0100)
>
> ----------------------------------------------------------------
>
> Ajay Kumar (8):
> EXYNOS5: Add support for FIMD and DP
> EXYNOS5: Change parent clock of FIMD to MPLL
> EXYNOS: Add dummy definition to fix compilation dependency on
> CONFIG_EXYNOS_MIPI_DSIM video: Modify exynos_fimd driver to support LCD
> console EXYNOS5: Make all display related code dependent on CONFIG_LCD
> EXYNOS5: Enable console multiplexing in u-boot
> video: exynos_dp: Remove unused variable disp_info
> video: exynos_fb: Make a call to draw_logo only when
> CONFIG_CMD_BMP is selected
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Bo Shen (1):
> arm: at91sam9x5: add dataflash boot support
>
> Chander Kashyap (4):
> EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
> EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
> EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
> EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency
>
> Fabio Estevam (4):
> mx6: Add workaround for ARM errata
> mx53loco: Add support for SEIKO 4.3'' WVGA panel
> mx6qsabresd: Fix booting the kernel from SDHC3
> mx51evk: Add DVI output support
>
> Hatim RV (5):
> EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
> fdt: exynos5: Add DT node definition for SROM and SMSC9215
> exynos5: Add DT based driver for SMC911X ethernet
> exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
> SMDK5250: config: Add configuration file for SMDK5250 board
>
> Jaehoon Chung (2):
> Exynos: clock: support get_mmc_clk for exynos
> Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk
>
> Otavio Salvador (6):
> mx6qsabrelite: Use tabs to environment setting
> mx28evk: We shouldn't hardcode a rootfs filesystem type
> mx28evk: Add support to dynamically choose between fdt use or not
> mx53loco: Add support to dynamically choose between fdt use or not
> mx6qsabrelite: Add support to dynamically choose between fdt use
> or not mx6qsabre{auto, sd}: Add support to dynamically choose between
> fdt use or not
>
> Piotr Wilczek (1):
> arm:exynos4:pinmux: Modify the gpio function for mmc
>
> Rajeshwari Shinde (23):
> EXYNOS5: FDT: Add I2C device node data
> EXYNOS5 : FDT: Add Aliases for I2C device
> FDT: Add compatible string for I2C
> EXYNOS5: FDT : Decode peripheral id
> I2C: Driver changes for FDT support
> SMDK5250: Initialise I2C using FDT
> EXYNOS5: FDT: Add sound device node data
> EXYNOS5: FDT: Add sound and codec device node
> EXYNOS5: FDT: Add compatible strings for sound
> Sound: Add FDT support to driver
> Sound: WM8994: Add FDT support to codec
> Sound: Add FDT support to CMD.
> EXYNOS5: FDT: Add compatible strings for SPI
> EXYNOS5 : FDT: Add Aliases for SPI device
> EXYNOS5: FDT: Add SPI device node data
> SPI: EXYNOS: Add FDT support to driver.
> EHCI: Exynos: Add fdt support
> EXYNOS5: Add device node for USB.
> EXYNOS5: FDT: Add compatible strings for USB
> EXYNOS5: FDT: Add compatible strings for PMIC
> EXYNOS5: Add device node for PMIC
> PMIC: MAX77686: Add FDT Support
> I2C: S3C24X0: Resolve build error for VCMA9
>
> Troy Kisky (1):
> mx31/mx35/mx51/mx53/mx6: add watchdog
>
> Vivek Gautam (1):
> SMDK5250: Enable VBus for USB 2.0 controller
>
> ??ukasz Majewski (2):
> spl:falcon:trats Update Trats default board configuration file to
> support FALCON MODE video:cache:fix: Enable dcache flush at LCD
> subsystem for Exynos based boards
>
> arch/arm/cpu/arm1136/mx31/timer.c | 39 ----
> arch/arm/cpu/arm1136/mx35/generic.c | 6 -
> arch/arm/cpu/armv7/exynos/clock.c | 272
> +++++++++++++++++++++- arch/arm/cpu/armv7/exynos/pinmux.c
> | 74 ++++++ arch/arm/cpu/armv7/mx6/lowlevel_init.S | 10 +
> arch/arm/dts/exynos5250.dtsi | 154 ++++++++++++
> arch/arm/imx-common/cpu.c | 5 -
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 276
> ++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/cpu.h
> | 48 +++- arch/arm/include/asm/arch-exynos/dp_info.h | 2 +
> arch/arm/include/asm/arch-exynos/gpio.h | 85 +++++++
> arch/arm/include/asm/arch-exynos/mipi_dsim.h | 7 +
> arch/arm/include/asm/arch-exynos/periph.h | 33 +--
> arch/arm/include/asm/arch-exynos/pinmux.h | 8 +
> arch/arm/include/asm/arch-exynos/sromc.h | 18 ++
> arch/arm/include/asm/arch-mx31/clock.h | 2 -
> arch/arm/include/asm/arch-mx31/imx-regs.h | 13 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 11 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 10 -
> board/davedenx/qong/qong.c | 9 +-
> board/freescale/mx31pdk/mx31pdk.c | 9 +-
> board/freescale/mx51evk/mx51evk.c | 2 -
> board/freescale/mx51evk/mx51evk_video.c | 39 +++-
> board/freescale/mx53loco/mx53loco.c | 2 -
> board/freescale/mx53loco/mx53loco_video.c | 38 ++-
> board/hale/tt01/tt01.c | 2 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 69 ++++++
> board/samsung/smdk5250/smdk5250.c | 237 +++++++++++++++----
> board/samsung/trats/trats.c | 2 +-
> boards.cfg | 1 +
> common/cmd_sound.c | 2 +-
> doc/README.watchdog | 29 +++
> doc/device-tree-bindings/exynos/isp-spi.txt | 22 ++
> doc/device-tree-bindings/exynos/sound.txt | 27 +++
> drivers/i2c/s3c24x0_i2c.c | 85 ++++++-
> drivers/i2c/s3c24x0_i2c.h | 7 +
> drivers/power/pmic/pmic_max77686.c | 37 ++-
> drivers/sound/sound.c | 171 ++++++++------
> drivers/sound/wm8994.c | 74 +++++-
> drivers/sound/wm8994.h | 6 +-
> drivers/spi/exynos_spi.c | 96 +++++++-
> drivers/usb/host/ehci-exynos.c | 92 +++++++-
> drivers/video/exynos_dp.c | 2 -
> drivers/video/exynos_fb.c | 7 +
> drivers/video/exynos_fimd.c | 12 +-
> drivers/watchdog/Makefile | 3 +
> drivers/watchdog/imx_watchdog.c | 66 ++++++
> include/configs/at91sam9x5ek.h | 10 +
> include/configs/exynos5250-dt.h | 321
> ++++++++++++++++++++++++++
> include/configs/mx28evk.h | 47 +++-
> include/configs/mx31pdk.h | 1 +
> include/configs/mx53loco.h | 44 +++-
> include/configs/mx6qsabre_common.h | 43 +++-
> include/configs/mx6qsabreauto.h | 1 +
> include/configs/mx6qsabrelite.h | 101 +++++---
> include/configs/mx6qsabresd.h | 3 +-
> include/configs/qong.h | 1 +
> include/configs/smdk5250.h | 278
> +--------------------- include/configs/trats.h
> | 45 +++- include/fdtdec.h | 9 +
> include/i2c.h | 26 +++
> include/sound.h | 4 +-
> include/watchdog.h | 1 +
> lib/fdtdec.c | 9 + 65 files
> changed, 2558 insertions(+), 608 deletions(-) create mode 100644
> arch/arm/dts/exynos5250.dtsi create mode 100644
> board/samsung/dts/exynos5250-smdk5250.dts create mode 100644
> doc/README.watchdog create mode 100644
> doc/device-tree-bindings/exynos/isp-spi.txt create mode 100644
> doc/device-tree-bindings/exynos/sound.txt create mode 100644
> drivers/watchdog/imx_watchdog.c create mode 100644
> include/configs/exynos5250-dt.h
Along with the patch I posted, applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130114/0e7e7c21/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-01-14 16:58 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
fd70aa41468be4324275910f85578cb5be6a0439:
m68k/lib: fix serial driver relocation (2013-01-11 14:41:14 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to a17617d6553369ba72c080128ed8d0b0c33dfc89:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-14
17:00:02 +0100)
----------------------------------------------------------------
Ajay Kumar (8):
EXYNOS5: Add support for FIMD and DP
EXYNOS5: Change parent clock of FIMD to MPLL
EXYNOS: Add dummy definition to fix compilation dependency on
CONFIG_EXYNOS_MIPI_DSIM video: Modify exynos_fimd driver to support LCD
console EXYNOS5: Make all display related code dependent on CONFIG_LCD
EXYNOS5: Enable console multiplexing in u-boot
video: exynos_dp: Remove unused variable disp_info
video: exynos_fb: Make a call to draw_logo only when
CONFIG_CMD_BMP is selected
Albert ARIBAUD (2):
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Bo Shen (1):
arm: at91sam9x5: add dataflash boot support
Chander Kashyap (4):
EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses
EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12
EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency
Fabio Estevam (4):
mx6: Add workaround for ARM errata
mx53loco: Add support for SEIKO 4.3'' WVGA panel
mx6qsabresd: Fix booting the kernel from SDHC3
mx51evk: Add DVI output support
Hatim RV (5):
EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250
fdt: exynos5: Add DT node definition for SROM and SMSC9215
exynos5: Add DT based driver for SMC911X ethernet
exynos5: config: Rename the smdk5250.h to exynos5250-dt.h
SMDK5250: config: Add configuration file for SMDK5250 board
Jaehoon Chung (2):
Exynos: clock: support get_mmc_clk for exynos
Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk
Otavio Salvador (6):
mx6qsabrelite: Use tabs to environment setting
mx28evk: We shouldn't hardcode a rootfs filesystem type
mx28evk: Add support to dynamically choose between fdt use or not
mx53loco: Add support to dynamically choose between fdt use or not
mx6qsabrelite: Add support to dynamically choose between fdt use
or not mx6qsabre{auto, sd}: Add support to dynamically choose between
fdt use or not
Piotr Wilczek (1):
arm:exynos4:pinmux: Modify the gpio function for mmc
Rajeshwari Shinde (23):
EXYNOS5: FDT: Add I2C device node data
EXYNOS5 : FDT: Add Aliases for I2C device
FDT: Add compatible string for I2C
EXYNOS5: FDT : Decode peripheral id
I2C: Driver changes for FDT support
SMDK5250: Initialise I2C using FDT
EXYNOS5: FDT: Add sound device node data
EXYNOS5: FDT: Add sound and codec device node
EXYNOS5: FDT: Add compatible strings for sound
Sound: Add FDT support to driver
Sound: WM8994: Add FDT support to codec
Sound: Add FDT support to CMD.
EXYNOS5: FDT: Add compatible strings for SPI
EXYNOS5 : FDT: Add Aliases for SPI device
EXYNOS5: FDT: Add SPI device node data
SPI: EXYNOS: Add FDT support to driver.
EHCI: Exynos: Add fdt support
EXYNOS5: Add device node for USB.
EXYNOS5: FDT: Add compatible strings for USB
EXYNOS5: FDT: Add compatible strings for PMIC
EXYNOS5: Add device node for PMIC
PMIC: MAX77686: Add FDT Support
I2C: S3C24X0: Resolve build error for VCMA9
Troy Kisky (1):
mx31/mx35/mx51/mx53/mx6: add watchdog
Vivek Gautam (1):
SMDK5250: Enable VBus for USB 2.0 controller
?ukasz Majewski (2):
spl:falcon:trats Update Trats default board configuration file to
support FALCON MODE video:cache:fix: Enable dcache flush at LCD
subsystem for Exynos based boards
arch/arm/cpu/arm1136/mx31/timer.c | 39 ----
arch/arm/cpu/arm1136/mx35/generic.c | 6 -
arch/arm/cpu/armv7/exynos/clock.c | 272
+++++++++++++++++++++- arch/arm/cpu/armv7/exynos/pinmux.c
| 74 ++++++ arch/arm/cpu/armv7/mx6/lowlevel_init.S | 10 +
arch/arm/dts/exynos5250.dtsi | 154 ++++++++++++
arch/arm/imx-common/cpu.c | 5 -
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/clock.h | 276
++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/cpu.h
| 48 +++- arch/arm/include/asm/arch-exynos/dp_info.h | 2 +
arch/arm/include/asm/arch-exynos/gpio.h | 85 +++++++
arch/arm/include/asm/arch-exynos/mipi_dsim.h | 7 +
arch/arm/include/asm/arch-exynos/periph.h | 33 +--
arch/arm/include/asm/arch-exynos/pinmux.h | 8 +
arch/arm/include/asm/arch-exynos/sromc.h | 18 ++
arch/arm/include/asm/arch-mx31/clock.h | 2 -
arch/arm/include/asm/arch-mx31/imx-regs.h | 13 +-
arch/arm/include/asm/arch-mx35/imx-regs.h | 11 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 10 -
board/davedenx/qong/qong.c | 9 +-
board/freescale/mx31pdk/mx31pdk.c | 9 +-
board/freescale/mx51evk/mx51evk.c | 2 -
board/freescale/mx51evk/mx51evk_video.c | 39 +++-
board/freescale/mx53loco/mx53loco.c | 2 -
board/freescale/mx53loco/mx53loco_video.c | 38 ++-
board/hale/tt01/tt01.c | 2 +-
board/samsung/dts/exynos5250-smdk5250.dts | 69 ++++++
board/samsung/smdk5250/smdk5250.c | 237 +++++++++++++++----
board/samsung/trats/trats.c | 2 +-
boards.cfg | 1 +
common/cmd_sound.c | 2 +-
doc/README.watchdog | 29 +++
doc/device-tree-bindings/exynos/isp-spi.txt | 22 ++
doc/device-tree-bindings/exynos/sound.txt | 27 +++
drivers/i2c/s3c24x0_i2c.c | 85 ++++++-
drivers/i2c/s3c24x0_i2c.h | 7 +
drivers/power/pmic/pmic_max77686.c | 37 ++-
drivers/sound/sound.c | 171 ++++++++------
drivers/sound/wm8994.c | 74 +++++-
drivers/sound/wm8994.h | 6 +-
drivers/spi/exynos_spi.c | 96 +++++++-
drivers/usb/host/ehci-exynos.c | 92 +++++++-
drivers/video/exynos_dp.c | 2 -
drivers/video/exynos_fb.c | 7 +
drivers/video/exynos_fimd.c | 12 +-
drivers/watchdog/Makefile | 3 +
drivers/watchdog/imx_watchdog.c | 66 ++++++
include/configs/at91sam9x5ek.h | 10 +
include/configs/exynos5250-dt.h | 321
++++++++++++++++++++++++++
include/configs/mx28evk.h | 47 +++-
include/configs/mx31pdk.h | 1 +
include/configs/mx53loco.h | 44 +++-
include/configs/mx6qsabre_common.h | 43 +++-
include/configs/mx6qsabreauto.h | 1 +
include/configs/mx6qsabrelite.h | 101 +++++---
include/configs/mx6qsabresd.h | 3 +-
include/configs/qong.h | 1 +
include/configs/smdk5250.h | 278
+--------------------- include/configs/trats.h
| 45 +++- include/fdtdec.h | 9 +
include/i2c.h | 26 +++
include/sound.h | 4 +-
include/watchdog.h | 1 +
lib/fdtdec.c | 9 + 65 files
changed, 2558 insertions(+), 608 deletions(-) create mode 100644
arch/arm/dts/exynos5250.dtsi create mode 100644
board/samsung/dts/exynos5250-smdk5250.dts create mode 100644
doc/README.watchdog create mode 100644
doc/device-tree-bindings/exynos/isp-spi.txt create mode 100644
doc/device-tree-bindings/exynos/sound.txt create mode 100644
drivers/watchdog/imx_watchdog.c create mode 100644
include/configs/exynos5250-dt.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-11 21:36 Albert ARIBAUD
@ 2013-01-11 23:44 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-01-11 23:44 UTC (permalink / raw)
To: u-boot
On Fri, Jan 11, 2013 at 10:36:06PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 61bdb9133593f0f881a57232039296f64bd662ed:
>
> arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> for you to fetch changes up to 59ee45ee91cc91b392a8e2684bfcb8c933ce4967:
>
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-01-11
> 18:17:33 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (6):
> mv88e61xx: refactor PHY and SWITCH level-code
> kirkwood: make MPP arrays static const
> ARM: lacie_kw: add support for WIRELESS_SPACE
> Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'
> Merge 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>
> Andreas Bie??mann (1):
> mv-common.h: increase malloc arena to 4MiB
>
> Arun Mankuzhi (1):
> arm: move flush_dcache_all() to just before disable cache
>
> Bo Shen (1):
> spi: atmel: sam9m10g45 also support WDRBT bit
>
> Gabe Black (1):
> arm: Keep track of the tlb size as well as its location
>
> Holger Brunck (3):
> arm/km: fix memory settings
> km/common: drop unneeded std* environment variables
> km/common: cosmetic change reported from checkpatch
>
> Javier Martinez Canillas (3):
> OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for
> CONFIG_SPL_NAND_SUPPORT serial/ns16550: add an option to avoid hanging
> on broken platforms OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT
>
> Luke Lowrey (1):
> arch-kirkwood: Ethernet port macro returning incorrect address
>
> Michael Walle (1):
> lsxl: unset ncip for rescue mode
>
> Nishanth Menon (1):
> Makefile: remove MLO.byteswap on clobber
>
> Richard Genoud (3):
> at91sam9x5: enable USB support for 9x5ek board.
> at91sam9x5ek: regroup FAT/DOS features
> at91sam9x5ek: add USB configuration
>
> Simon Glass (6):
> arm: Move fdt check earlier so that board_early_init_f() can use
> it arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
> Document the CONFIG_DISPLAY_BOARDINFO option
> arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on
> LCD Add option to display customised memory information
> arm: Move bootstage record for board_init_f() to after
> arch_cpu_init()
>
> Taylor Hutt (1):
> arm: Tabify code for MMC initialization
>
> Tom Wai-Hong Tam (1):
> arm: Make interrupts.o and reset.o in libarm also appear in SPL
>
> Valentin Longchamp (1):
> arm/km: remove duplicate code
>
> Makefile | 2 +-
> README | 28 ++
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 +
> arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +-
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 2 +
> arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +-
> arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
> arch/arm/include/asm/global_data.h | 1 +
> arch/arm/lib/Makefile | 5 +-
> arch/arm/lib/board.c | 75 +++-
> arch/arm/lib/cache-cp15.c | 5 +-
> board/LaCie/net2big_v2/net2big_v2.c | 2 +-
> board/LaCie/netspace_v2/netspace_v2.c | 2 +-
> board/LaCie/wireless_space/Makefile | 46 ++
> board/LaCie/wireless_space/kwbimage.cfg | 82 ++++
> board/LaCie/wireless_space/wireless_space.c | 176 ++++++++
> board/Marvell/dreamplug/dreamplug.c | 2 +-
> board/Marvell/guruplug/guruplug.c | 2 +-
> board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +-
> board/Marvell/openrd/openrd.c | 2 +-
> board/Marvell/rd6281a/rd6281a.c | 2 +-
> board/Marvell/sheevaplug/sheevaplug.c | 2 +-
> board/Seagate/dockstar/dockstar.c | 2 +-
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +
> board/buffalo/lsxl/lsxl.c | 7 +-
> board/cloudengines/pogo_e02/pogo_e02.c | 2 +-
> board/d-link/dns325/dns325.c | 2 +-
> board/iomega/iconnect/iconnect.c | 2 +-
> board/karo/tk71/tk71.c | 2 +-
> board/keymile/common/common.c | 2 +-
> board/keymile/km_arm/km_arm.c | 16 +-
> board/keymile/km_arm/kwbimage-memphis.cfg | 6 +-
> board/keymile/km_arm/kwbimage.cfg | 6 +-
> board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +-
> board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +-
> board/raidsonic/ib62x0/ib62x0.c | 2 +-
> boards.cfg | 1 +
> common/cmd_mem.c | 27 ++
> drivers/net/phy/mv88e61xx.c | 495
> ++++++++++++++--------
> drivers/net/phy/mv88e61xx.h | 39 +-
> drivers/serial/ns16550.c | 2 +
> drivers/spi/atmel_spi.c | 2 +-
> drivers/spi/kirkwood_spi.c | 12 +-
> drivers/usb/host/ohci-at91.c | 6 +-
> include/common.h | 9 +
> include/config_cmd_all.h | 1 +
> include/configs/at91sam9x5ek.h | 29 +-
> include/configs/igep00x0.h | 4 +
> include/configs/km/keymile-common.h | 3 -
> include/configs/lsxl.h | 2 +-
> include/configs/mv-common.h | 2 +-
> include/configs/wireless_space.h | 194 +++++++++
> include/netdev.h | 21 +- 53 files
> changed, 1090 insertions(+), 318 deletions(-) create mode 100644
> board/LaCie/wireless_space/Makefile create mode 100644
> board/LaCie/wireless_space/kwbimage.cfg create mode 100644
> board/LaCie/wireless_space/wireless_space.c create mode 100644
> include/configs/wireless_space.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130111/888a8e38/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-01-11 21:36 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
61bdb9133593f0f881a57232039296f64bd662ed:
arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to 59ee45ee91cc91b392a8e2684bfcb8c933ce4967:
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-01-11
18:17:33 +0100)
----------------------------------------------------------------
Albert ARIBAUD (6):
mv88e61xx: refactor PHY and SWITCH level-code
kirkwood: make MPP arrays static const
ARM: lacie_kw: add support for WIRELESS_SPACE
Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master'
Merge 'u-boot-atmel/master' into 'u-boot-arm/master'
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Andreas Bie?mann (1):
mv-common.h: increase malloc arena to 4MiB
Arun Mankuzhi (1):
arm: move flush_dcache_all() to just before disable cache
Bo Shen (1):
spi: atmel: sam9m10g45 also support WDRBT bit
Gabe Black (1):
arm: Keep track of the tlb size as well as its location
Holger Brunck (3):
arm/km: fix memory settings
km/common: drop unneeded std* environment variables
km/common: cosmetic change reported from checkpatch
Javier Martinez Canillas (3):
OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for
CONFIG_SPL_NAND_SUPPORT serial/ns16550: add an option to avoid hanging
on broken platforms OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT
Luke Lowrey (1):
arch-kirkwood: Ethernet port macro returning incorrect address
Michael Walle (1):
lsxl: unset ncip for rescue mode
Nishanth Menon (1):
Makefile: remove MLO.byteswap on clobber
Richard Genoud (3):
at91sam9x5: enable USB support for 9x5ek board.
at91sam9x5ek: regroup FAT/DOS features
at91sam9x5ek: add USB configuration
Simon Glass (6):
arm: Move fdt check earlier so that board_early_init_f() can use
it arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
Document the CONFIG_DISPLAY_BOARDINFO option
arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on
LCD Add option to display customised memory information
arm: Move bootstage record for board_init_f() to after
arch_cpu_init()
Taylor Hutt (1):
arm: Tabify code for MMC initialization
Tom Wai-Hong Tam (1):
arm: Make interrupts.o and reset.o in libarm also appear in SPL
Valentin Longchamp (1):
arm/km: remove duplicate code
Makefile | 2 +-
README | 28 ++
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 13 +
arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +-
arch/arm/include/asm/arch-at91/at91sam9x5.h | 2 +
arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +-
arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
arch/arm/include/asm/global_data.h | 1 +
arch/arm/lib/Makefile | 5 +-
arch/arm/lib/board.c | 75 +++-
arch/arm/lib/cache-cp15.c | 5 +-
board/LaCie/net2big_v2/net2big_v2.c | 2 +-
board/LaCie/netspace_v2/netspace_v2.c | 2 +-
board/LaCie/wireless_space/Makefile | 46 ++
board/LaCie/wireless_space/kwbimage.cfg | 82 ++++
board/LaCie/wireless_space/wireless_space.c | 176 ++++++++
board/Marvell/dreamplug/dreamplug.c | 2 +-
board/Marvell/guruplug/guruplug.c | 2 +-
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +-
board/Marvell/openrd/openrd.c | 2 +-
board/Marvell/rd6281a/rd6281a.c | 2 +-
board/Marvell/sheevaplug/sheevaplug.c | 2 +-
board/Seagate/dockstar/dockstar.c | 2 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +
board/buffalo/lsxl/lsxl.c | 7 +-
board/cloudengines/pogo_e02/pogo_e02.c | 2 +-
board/d-link/dns325/dns325.c | 2 +-
board/iomega/iconnect/iconnect.c | 2 +-
board/karo/tk71/tk71.c | 2 +-
board/keymile/common/common.c | 2 +-
board/keymile/km_arm/km_arm.c | 16 +-
board/keymile/km_arm/kwbimage-memphis.cfg | 6 +-
board/keymile/km_arm/kwbimage.cfg | 6 +-
board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 +-
board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 +-
board/raidsonic/ib62x0/ib62x0.c | 2 +-
boards.cfg | 1 +
common/cmd_mem.c | 27 ++
drivers/net/phy/mv88e61xx.c | 495
++++++++++++++--------
drivers/net/phy/mv88e61xx.h | 39 +-
drivers/serial/ns16550.c | 2 +
drivers/spi/atmel_spi.c | 2 +-
drivers/spi/kirkwood_spi.c | 12 +-
drivers/usb/host/ohci-at91.c | 6 +-
include/common.h | 9 +
include/config_cmd_all.h | 1 +
include/configs/at91sam9x5ek.h | 29 +-
include/configs/igep00x0.h | 4 +
include/configs/km/keymile-common.h | 3 -
include/configs/lsxl.h | 2 +-
include/configs/mv-common.h | 2 +-
include/configs/wireless_space.h | 194 +++++++++
include/netdev.h | 21 +- 53 files
changed, 1090 insertions(+), 318 deletions(-) create mode 100644
board/LaCie/wireless_space/Makefile create mode 100644
board/LaCie/wireless_space/kwbimage.cfg create mode 100644
board/LaCie/wireless_space/wireless_space.c create mode 100644
include/configs/wireless_space.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-09 14:43 Albert ARIBAUD
@ 2013-01-09 19:35 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-01-09 19:35 UTC (permalink / raw)
To: u-boot
On Wed, Jan 09, 2013 at 03:43:04PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
> 14:59:37 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm.git master
>
> for you to fetch changes up to 61bdb9133593f0f881a57232039296f64bd662ed:
>
> arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (2):
> arm: move C runtime setup code in crt0.S
> arm: remove useless code in start.S files
>
> arch/arm/cpu/arm1136/start.S | 71 +++---------
> arch/arm/cpu/arm1176/start.S | 62 ++---------
> arch/arm/cpu/arm720t/start.S | 53 ++-------
> arch/arm/cpu/arm920t/start.S | 61 ++--------
> arch/arm/cpu/arm925t/start.S | 65 ++---------
> arch/arm/cpu/arm926ejs/start.S | 86 ++------------
> arch/arm/cpu/arm946es/start.S | 56 ++--------
> arch/arm/cpu/arm_intcm/start.S | 63 ++---------
> arch/arm/cpu/armv7/start.S | 58 +++-------
> arch/arm/cpu/ixp/start.S | 55 ++-------
> arch/arm/cpu/pxa/start.S | 63 ++---------
> arch/arm/cpu/s3c44b0/start.S | 55 ++-------
> arch/arm/cpu/sa1100/start.S | 50 ++-------
> arch/arm/lib/Makefile | 2 +
> arch/arm/lib/board.c | 11 --
> arch/arm/lib/crt0.S | 173
> +++++++++++++++++++++++++++++
> include/common.h | 2 +-
> include/configs/socfpga_cyclone5.h | 2 +-
> lib/asm-offsets.c | 14 +++
> nand_spl/board/freescale/mx31pdk/Makefile | 6 +-
> nand_spl/board/karo/tx25/Makefile | 6 +- 21 files changed,
> 326 insertions(+), 688 deletions(-) create mode 100644
> arch/arm/lib/crt0.S
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130109/e837c3a1/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-01-09 14:43 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
14:59:37 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to 61bdb9133593f0f881a57232039296f64bd662ed:
arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
----------------------------------------------------------------
Albert ARIBAUD (2):
arm: move C runtime setup code in crt0.S
arm: remove useless code in start.S files
arch/arm/cpu/arm1136/start.S | 71 +++---------
arch/arm/cpu/arm1176/start.S | 62 ++---------
arch/arm/cpu/arm720t/start.S | 53 ++-------
arch/arm/cpu/arm920t/start.S | 61 ++--------
arch/arm/cpu/arm925t/start.S | 65 ++---------
arch/arm/cpu/arm926ejs/start.S | 86 ++------------
arch/arm/cpu/arm946es/start.S | 56 ++--------
arch/arm/cpu/arm_intcm/start.S | 63 ++---------
arch/arm/cpu/armv7/start.S | 58 +++-------
arch/arm/cpu/ixp/start.S | 55 ++-------
arch/arm/cpu/pxa/start.S | 63 ++---------
arch/arm/cpu/s3c44b0/start.S | 55 ++-------
arch/arm/cpu/sa1100/start.S | 50 ++-------
arch/arm/lib/Makefile | 2 +
arch/arm/lib/board.c | 11 --
arch/arm/lib/crt0.S | 173
+++++++++++++++++++++++++++++
include/common.h | 2 +-
include/configs/socfpga_cyclone5.h | 2 +-
lib/asm-offsets.c | 14 +++
nand_spl/board/freescale/mx31pdk/Makefile | 6 +-
nand_spl/board/karo/tx25/Makefile | 6 +- 21 files changed,
326 insertions(+), 688 deletions(-) create mode 100644
arch/arm/lib/crt0.S
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
@ 2013-01-08 22:34 ` Tom Rini
1 sibling, 0 replies; 261+ messages in thread
From: Tom Rini @ 2013-01-08 22:34 UTC (permalink / raw)
To: u-boot
On Tue, Jan 08, 2013 at 04:07:59PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 96764df1b47ddebfb50fadf5af72530b07b5fc89:
>
> Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
> +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm.git master
>
> for you to fetch changes up to 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
> 14:59:37 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Andreas Bie??mann (1):
> omap3/mem.c: remove unused defines
>
> Ashok (1):
> mx35pdk:Use IMX_GPIO_NR macro
>
> Davide Bonfanti (1):
> davinci: fixed cpu reset
>
> Fabio Estevam (6):
> mx35pdk: Allow booting of a device tree kernel
> mx53loco: Call PMIC related functions from board_late_init()
> mx51evk: Remove unneeded comment
> mx53loco: Remove unneeded 'retval' variable
> mx53loco: Improve error handling on power_init()
> tools: imximage: Load a size that is multiple of 512
>
> Ilya Yanok (6):
> OMAP: include sys_proto.h from boot-common
> am335x_evm: add nand pinmux definition
> am33xx: NAND support
> am335x_evm: enable NAND support
> am33xx_spl_bch: simple SPL nand loader for AM33XX
> am335x_evm: enable SPL NAND support
>
> Lokesh Vutla (1):
> omap: emif: configure emif only when required
>
> Mansoor Ahamed (2):
> am33xx: add ELM support
> omap_gpmc: BCH8 support (ELM based)
>
> Marek Vasut (1):
> mxs: Add NAND fdt and ramdisk partition to m28evk
>
> Nikita Kiryanov (2):
> gpio: add gpio_is_valid() to omap_gpio API
> cm-t35: enable zero bootdelay check
>
> Otavio Salvador (4):
> mx53loco: We shouldn't hardcode a rootfs filesystem type
> mx53loco: Change default loadaddr to 0x72000000
> mx6qsabrelite: Change default loadaddr to 0x12000000
> mx6qsabre_common: Change default loadaddr to 0x12000000
>
> Peter Barada (1):
> Pass sdrc timing values through board_sdrc_timings structure
>
> Robert P. J. Day (4):
> omap3_beagle.h: Fix comment for true/false return value.
> omap3: Add a few comments to "#endif"s for readability.
> omap4: Add comments on some "#endif"s for readability.
> OMAP: Tweak omap-common/Makefile since reset.S -> reset.c
>
> Shawn Guo (3):
> fsl_esdhc: add MMC_MODE_HC host_caps
> mx6qsabresd: add usdhc2 and usdhc4 support
> mx6qsabresd: use on-board eMMC to store environment
>
> Stefano Babic (2):
> OMAP3: fix panel timing on the mt_ventoux board
> OMAP3: TAM3517: add macros for reading eeprom
>
> Thomas Weber (1):
> OMAP3: Remove unused PHYS_SDRAM_1_SIZE
>
> Vincent Stehl?? (2):
> omap24xx_i2c: Handle wait_for_bb error
> power: twl6035: complain on LDO9 error
>
> Yegor Yefremov (2):
> am335x: disable internal delay for RGMII mode
> am335x: cpsw: make phy address configurable
>
> ajoy (1):
> OMAP3 SPI : Fixed bugs related to SPI transfer
>
> arch/arm/cpu/arm926ejs/davinci/reset.c | 2 +-
> arch/arm/cpu/armv7/am33xx/Makefile | 2 +
> arch/arm/cpu/armv7/am33xx/board.c | 1 +
> arch/arm/cpu/armv7/am33xx/clock.c | 10 +
> arch/arm/cpu/armv7/am33xx/elm.c | 212 ++++++++++++++
> arch/arm/cpu/armv7/am33xx/mem.c | 101 +++++++
> arch/arm/cpu/armv7/omap-common/Makefile | 5 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
> arch/arm/cpu/armv7/omap3/board.c | 4 +-
> arch/arm/cpu/armv7/omap3/mem.c | 18 +-
> arch/arm/cpu/armv7/omap3/sdrc.c | 36 +--
> arch/arm/cpu/armv7/omap4/clocks.c | 2 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 53 ++++
> arch/arm/include/asm/arch-am33xx/elm.h | 93 ++++++
> arch/arm/include/asm/arch-am33xx/hardware.h | 3 +
> arch/arm/include/asm/arch-am33xx/mem.h | 83 ++++++
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 120 ++++++++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 13 +-
> arch/arm/include/asm/omap_gpio.h | 7 +
> board/corscience/tricorder/tricorder.c | 13 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx53loco/mx53loco.c | 84 ++++--
> board/freescale/mx6qsabresd/mx6qsabresd.c | 80 ++++-
> board/isee/igep0020/igep0020.c | 29 +-
> board/isee/igep0030/igep0030.c | 29 +-
> board/overo/overo.c | 37 ++-
> board/technexion/twister/twister.c | 10 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 23 +-
> board/ti/am335x/board.c | 4 +-
> board/ti/am335x/mux.c | 22 ++
> board/ti/beagle/beagle.c | 53 ++--
> board/ti/evm/evm.c | 19 +-
> board/timll/devkit8000/devkit8000.c | 13 +-
> drivers/gpio/omap_gpio.c | 10 +-
> drivers/i2c/omap24xx_i2c.c | 20 +-
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/mtd/nand/Makefile | 5 +-
> drivers/mtd/nand/am335x_spl_bch.c | 238 +++++++++++++++
> drivers/mtd/nand/omap_gpmc.c | 403
> +++++++++++++++++++++++++-
> drivers/net/cpsw.c | 5 +-
> drivers/power/twl6035.c | 17 +-
> drivers/spi/omap3_spi.c | 76 +++--
> drivers/spi/omap3_spi.h | 1 +
> include/configs/am335x_evm.h | 50 ++++
> include/configs/cm_t35.h | 2 +-
> include/configs/dig297.h | 1 -
> include/configs/igep00x0.h | 1 -
> include/configs/m28evk.h | 2 +
> include/configs/mcx.h | 1 -
> include/configs/mx35pdk.h | 1 +
> include/configs/mx51evk.h | 4 -
> include/configs/mx53loco.h | 10 +-
> include/configs/mx6qsabre_common.h | 4 +-
> include/configs/mx6qsabreauto.h | 5 +
> include/configs/mx6qsabrelite.h | 2 +-
> include/configs/mx6qsabresd.h | 6 +
> include/configs/omap3_beagle.h | 2 +-
> include/configs/omap3_mvblx.h | 1 -
> include/configs/omap3_pandora.h | 1 -
> include/configs/omap3_sdp3430.h | 1 -
> include/configs/omap3_zoom1.h | 1 -
> include/configs/omap3_zoom2.h | 1 -
> include/configs/tam3517-common.h | 59 +++-
> include/configs/tricorder.h | 1 -
> include/image.h | 3 +
> include/twl6035.h | 2 +-
> tools/imximage.c | 9 +- 70 files
> changed, 1889 insertions(+), 290 deletions(-) create mode 100644
> arch/arm/cpu/armv7/am33xx/elm.c create mode 100644
> arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
> arch/arm/include/asm/arch-am33xx/elm.h create mode 100644
> arch/arm/include/asm/arch-am33xx/mem.h create mode 100644
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h create mode 100644
> drivers/mtd/nand/am335x_spl_bch.c
This has been applied to u-boot/master, thanks! Note that the arm
head.S stuff wasn't included in this request, but was in the tree at the
time. Per IRC, it broke builds and resulted in v5 of the series which
we shall deal with.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130108/5b4dfeeb/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-08 21:01 ` Albert ARIBAUD
@ 2013-01-08 21:06 ` Simon Glass
0 siblings, 0 replies; 261+ messages in thread
From: Simon Glass @ 2013-01-08 21:06 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Tue, Jan 8, 2013 at 1:01 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Simon,
>
> On Tue, 8 Jan 2013 12:50:57 -0800, Simon Glass <sjg@chromium.org> wrote:
>> Hi Albert,
>>
>> On Tue, Jan 8, 2013 at 7:07 AM, Albert ARIBAUD
>> <albert.u.boot@aribaud.net> wrote:
>> > Hello Tom,
>> >
>> > The following changes since commit
>> > 96764df1b47ddebfb50fadf5af72530b07b5fc89:
>> >
>> > Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
>> > +0100)
>> >
>> > are available in the git repository at:
>> >
>> >
>> > git://git.denx.de/u-boot-arm.git master
>> >
[snip]
>> I have some ARM patches starting here:
>>
>> http://patchwork.ozlabs.org/patch/203071/
>>
>> Do you expect to pick up some of these at some point?
>
> They've been submitted in v1 before nov 3rd, and the last version has
> received no request for correction for a whole month, so they have to
> get in anyway. I'll pull them in and send a PR tomorrow morning GMT+1.
OK thank you.
>
>> Regards,
>> Simon
>
> Amicalement,
> --
> Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-08 20:50 ` Simon Glass
@ 2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2013-01-08 21:01 UTC (permalink / raw)
To: u-boot
Hi Simon,
On Tue, 8 Jan 2013 12:50:57 -0800, Simon Glass <sjg@chromium.org> wrote:
> Hi Albert,
>
> On Tue, Jan 8, 2013 at 7:07 AM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
> > Hello Tom,
> >
> > The following changes since commit
> > 96764df1b47ddebfb50fadf5af72530b07b5fc89:
> >
> > Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
> > +0100)
> >
> > are available in the git repository at:
> >
> >
> > git://git.denx.de/u-boot-arm.git master
> >
> > for you to fetch changes up to 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
> >
> > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
> > 14:59:37 +0100)
> >
> > ----------------------------------------------------------------
> >
> > Albert ARIBAUD (2):
> > Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> >
> > Andreas Bie?mann (1):
> > omap3/mem.c: remove unused defines
> >
> > Ashok (1):
> > mx35pdk:Use IMX_GPIO_NR macro
> >
> > Davide Bonfanti (1):
> > davinci: fixed cpu reset
> >
> > Fabio Estevam (6):
> > mx35pdk: Allow booting of a device tree kernel
> > mx53loco: Call PMIC related functions from board_late_init()
> > mx51evk: Remove unneeded comment
> > mx53loco: Remove unneeded 'retval' variable
> > mx53loco: Improve error handling on power_init()
> > tools: imximage: Load a size that is multiple of 512
> >
> > Ilya Yanok (6):
> > OMAP: include sys_proto.h from boot-common
> > am335x_evm: add nand pinmux definition
> > am33xx: NAND support
> > am335x_evm: enable NAND support
> > am33xx_spl_bch: simple SPL nand loader for AM33XX
> > am335x_evm: enable SPL NAND support
> >
> > Lokesh Vutla (1):
> > omap: emif: configure emif only when required
> >
> > Mansoor Ahamed (2):
> > am33xx: add ELM support
> > omap_gpmc: BCH8 support (ELM based)
> >
> > Marek Vasut (1):
> > mxs: Add NAND fdt and ramdisk partition to m28evk
> >
> > Nikita Kiryanov (2):
> > gpio: add gpio_is_valid() to omap_gpio API
> > cm-t35: enable zero bootdelay check
> >
> > Otavio Salvador (4):
> > mx53loco: We shouldn't hardcode a rootfs filesystem type
> > mx53loco: Change default loadaddr to 0x72000000
> > mx6qsabrelite: Change default loadaddr to 0x12000000
> > mx6qsabre_common: Change default loadaddr to 0x12000000
> >
> > Peter Barada (1):
> > Pass sdrc timing values through board_sdrc_timings structure
> >
> > Robert P. J. Day (4):
> > omap3_beagle.h: Fix comment for true/false return value.
> > omap3: Add a few comments to "#endif"s for readability.
> > omap4: Add comments on some "#endif"s for readability.
> > OMAP: Tweak omap-common/Makefile since reset.S -> reset.c
> >
> > Shawn Guo (3):
> > fsl_esdhc: add MMC_MODE_HC host_caps
> > mx6qsabresd: add usdhc2 and usdhc4 support
> > mx6qsabresd: use on-board eMMC to store environment
> >
> > Stefano Babic (2):
> > OMAP3: fix panel timing on the mt_ventoux board
> > OMAP3: TAM3517: add macros for reading eeprom
> >
> > Thomas Weber (1):
> > OMAP3: Remove unused PHYS_SDRAM_1_SIZE
> >
> > Vincent Stehl? (2):
> > omap24xx_i2c: Handle wait_for_bb error
> > power: twl6035: complain on LDO9 error
> >
> > Yegor Yefremov (2):
> > am335x: disable internal delay for RGMII mode
> > am335x: cpsw: make phy address configurable
> >
> > ajoy (1):
> > OMAP3 SPI : Fixed bugs related to SPI transfer
> >
> > arch/arm/cpu/arm926ejs/davinci/reset.c | 2 +-
> > arch/arm/cpu/armv7/am33xx/Makefile | 2 +
> > arch/arm/cpu/armv7/am33xx/board.c | 1 +
> > arch/arm/cpu/armv7/am33xx/clock.c | 10 +
> > arch/arm/cpu/armv7/am33xx/elm.c | 212 ++++++++++++++
> > arch/arm/cpu/armv7/am33xx/mem.c | 101 +++++++
> > arch/arm/cpu/armv7/omap-common/Makefile | 5 +-
> > arch/arm/cpu/armv7/omap-common/boot-common.c | 1 +
> > arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
> > arch/arm/cpu/armv7/omap3/board.c | 4 +-
> > arch/arm/cpu/armv7/omap3/mem.c | 18 +-
> > arch/arm/cpu/armv7/omap3/sdrc.c | 36 +--
> > arch/arm/cpu/armv7/omap4/clocks.c | 2 +-
> > arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
> > arch/arm/include/asm/arch-am33xx/cpu.h | 53 ++++
> > arch/arm/include/asm/arch-am33xx/elm.h | 93 ++++++
> > arch/arm/include/asm/arch-am33xx/hardware.h | 3 +
> > arch/arm/include/asm/arch-am33xx/mem.h | 83 ++++++
> > arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 120 ++++++++
> > arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 +
> > arch/arm/include/asm/arch-omap3/sys_proto.h | 13 +-
> > arch/arm/include/asm/omap_gpio.h | 7 +
> > board/corscience/tricorder/tricorder.c | 13 +-
> > board/freescale/mx35pdk/mx35pdk.c | 2 +-
> > board/freescale/mx53loco/mx53loco.c | 84 ++++--
> > board/freescale/mx6qsabresd/mx6qsabresd.c | 80 ++++-
> > board/isee/igep0020/igep0020.c | 29 +-
> > board/isee/igep0030/igep0030.c | 29 +-
> > board/overo/overo.c | 37 ++-
> > board/technexion/twister/twister.c | 10 +-
> > board/teejet/mt_ventoux/mt_ventoux.c | 23 +-
> > board/ti/am335x/board.c | 4 +-
> > board/ti/am335x/mux.c | 22 ++
> > board/ti/beagle/beagle.c | 53 ++--
> > board/ti/evm/evm.c | 19 +-
> > board/timll/devkit8000/devkit8000.c | 13 +-
> > drivers/gpio/omap_gpio.c | 10 +-
> > drivers/i2c/omap24xx_i2c.c | 20 +-
> > drivers/mmc/fsl_esdhc.c | 2 +-
> > drivers/mtd/nand/Makefile | 5 +-
> > drivers/mtd/nand/am335x_spl_bch.c | 238 +++++++++++++++
> > drivers/mtd/nand/omap_gpmc.c | 403
> > +++++++++++++++++++++++++-
> > drivers/net/cpsw.c | 5 +-
> > drivers/power/twl6035.c | 17 +-
> > drivers/spi/omap3_spi.c | 76 +++--
> > drivers/spi/omap3_spi.h | 1 +
> > include/configs/am335x_evm.h | 50 ++++
> > include/configs/cm_t35.h | 2 +-
> > include/configs/dig297.h | 1 -
> > include/configs/igep00x0.h | 1 -
> > include/configs/m28evk.h | 2 +
> > include/configs/mcx.h | 1 -
> > include/configs/mx35pdk.h | 1 +
> > include/configs/mx51evk.h | 4 -
> > include/configs/mx53loco.h | 10 +-
> > include/configs/mx6qsabre_common.h | 4 +-
> > include/configs/mx6qsabreauto.h | 5 +
> > include/configs/mx6qsabrelite.h | 2 +-
> > include/configs/mx6qsabresd.h | 6 +
> > include/configs/omap3_beagle.h | 2 +-
> > include/configs/omap3_mvblx.h | 1 -
> > include/configs/omap3_pandora.h | 1 -
> > include/configs/omap3_sdp3430.h | 1 -
> > include/configs/omap3_zoom1.h | 1 -
> > include/configs/omap3_zoom2.h | 1 -
> > include/configs/tam3517-common.h | 59 +++-
> > include/configs/tricorder.h | 1 -
> > include/image.h | 3 +
> > include/twl6035.h | 2 +-
> > tools/imximage.c | 9 +- 70 files
> > changed, 1889 insertions(+), 290 deletions(-) create mode 100644
> > arch/arm/cpu/armv7/am33xx/elm.c create mode 100644
> > arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
> > arch/arm/include/asm/arch-am33xx/elm.h create mode 100644
> > arch/arm/include/asm/arch-am33xx/mem.h create mode 100644
> > arch/arm/include/asm/arch-am33xx/omap_gpmc.h create mode 100644
> > drivers/mtd/nand/am335x_spl_bch.c
> >
>
> I have some ARM patches starting here:
>
> http://patchwork.ozlabs.org/patch/203071/
>
> Do you expect to pick up some of these at some point?
They've been submitted in v1 before nov 3rd, and the last version has
received no request for correction for a whole month, so they have to
get in anyway. I'll pull them in and send a PR tomorrow morning GMT+1.
> Regards,
> Simon
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-08 15:07 Albert ARIBAUD
@ 2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 22:34 ` Tom Rini
1 sibling, 1 reply; 261+ messages in thread
From: Simon Glass @ 2013-01-08 20:50 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Tue, Jan 8, 2013 at 7:07 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hello Tom,
>
> The following changes since commit
> 96764df1b47ddebfb50fadf5af72530b07b5fc89:
>
> Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
> +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm.git master
>
> for you to fetch changes up to 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
> 14:59:37 +0100)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>
> Andreas Bie?mann (1):
> omap3/mem.c: remove unused defines
>
> Ashok (1):
> mx35pdk:Use IMX_GPIO_NR macro
>
> Davide Bonfanti (1):
> davinci: fixed cpu reset
>
> Fabio Estevam (6):
> mx35pdk: Allow booting of a device tree kernel
> mx53loco: Call PMIC related functions from board_late_init()
> mx51evk: Remove unneeded comment
> mx53loco: Remove unneeded 'retval' variable
> mx53loco: Improve error handling on power_init()
> tools: imximage: Load a size that is multiple of 512
>
> Ilya Yanok (6):
> OMAP: include sys_proto.h from boot-common
> am335x_evm: add nand pinmux definition
> am33xx: NAND support
> am335x_evm: enable NAND support
> am33xx_spl_bch: simple SPL nand loader for AM33XX
> am335x_evm: enable SPL NAND support
>
> Lokesh Vutla (1):
> omap: emif: configure emif only when required
>
> Mansoor Ahamed (2):
> am33xx: add ELM support
> omap_gpmc: BCH8 support (ELM based)
>
> Marek Vasut (1):
> mxs: Add NAND fdt and ramdisk partition to m28evk
>
> Nikita Kiryanov (2):
> gpio: add gpio_is_valid() to omap_gpio API
> cm-t35: enable zero bootdelay check
>
> Otavio Salvador (4):
> mx53loco: We shouldn't hardcode a rootfs filesystem type
> mx53loco: Change default loadaddr to 0x72000000
> mx6qsabrelite: Change default loadaddr to 0x12000000
> mx6qsabre_common: Change default loadaddr to 0x12000000
>
> Peter Barada (1):
> Pass sdrc timing values through board_sdrc_timings structure
>
> Robert P. J. Day (4):
> omap3_beagle.h: Fix comment for true/false return value.
> omap3: Add a few comments to "#endif"s for readability.
> omap4: Add comments on some "#endif"s for readability.
> OMAP: Tweak omap-common/Makefile since reset.S -> reset.c
>
> Shawn Guo (3):
> fsl_esdhc: add MMC_MODE_HC host_caps
> mx6qsabresd: add usdhc2 and usdhc4 support
> mx6qsabresd: use on-board eMMC to store environment
>
> Stefano Babic (2):
> OMAP3: fix panel timing on the mt_ventoux board
> OMAP3: TAM3517: add macros for reading eeprom
>
> Thomas Weber (1):
> OMAP3: Remove unused PHYS_SDRAM_1_SIZE
>
> Vincent Stehl? (2):
> omap24xx_i2c: Handle wait_for_bb error
> power: twl6035: complain on LDO9 error
>
> Yegor Yefremov (2):
> am335x: disable internal delay for RGMII mode
> am335x: cpsw: make phy address configurable
>
> ajoy (1):
> OMAP3 SPI : Fixed bugs related to SPI transfer
>
> arch/arm/cpu/arm926ejs/davinci/reset.c | 2 +-
> arch/arm/cpu/armv7/am33xx/Makefile | 2 +
> arch/arm/cpu/armv7/am33xx/board.c | 1 +
> arch/arm/cpu/armv7/am33xx/clock.c | 10 +
> arch/arm/cpu/armv7/am33xx/elm.c | 212 ++++++++++++++
> arch/arm/cpu/armv7/am33xx/mem.c | 101 +++++++
> arch/arm/cpu/armv7/omap-common/Makefile | 5 +-
> arch/arm/cpu/armv7/omap-common/boot-common.c | 1 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
> arch/arm/cpu/armv7/omap3/board.c | 4 +-
> arch/arm/cpu/armv7/omap3/mem.c | 18 +-
> arch/arm/cpu/armv7/omap3/sdrc.c | 36 +--
> arch/arm/cpu/armv7/omap4/clocks.c | 2 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 53 ++++
> arch/arm/include/asm/arch-am33xx/elm.h | 93 ++++++
> arch/arm/include/asm/arch-am33xx/hardware.h | 3 +
> arch/arm/include/asm/arch-am33xx/mem.h | 83 ++++++
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 120 ++++++++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 13 +-
> arch/arm/include/asm/omap_gpio.h | 7 +
> board/corscience/tricorder/tricorder.c | 13 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx53loco/mx53loco.c | 84 ++++--
> board/freescale/mx6qsabresd/mx6qsabresd.c | 80 ++++-
> board/isee/igep0020/igep0020.c | 29 +-
> board/isee/igep0030/igep0030.c | 29 +-
> board/overo/overo.c | 37 ++-
> board/technexion/twister/twister.c | 10 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 23 +-
> board/ti/am335x/board.c | 4 +-
> board/ti/am335x/mux.c | 22 ++
> board/ti/beagle/beagle.c | 53 ++--
> board/ti/evm/evm.c | 19 +-
> board/timll/devkit8000/devkit8000.c | 13 +-
> drivers/gpio/omap_gpio.c | 10 +-
> drivers/i2c/omap24xx_i2c.c | 20 +-
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/mtd/nand/Makefile | 5 +-
> drivers/mtd/nand/am335x_spl_bch.c | 238 +++++++++++++++
> drivers/mtd/nand/omap_gpmc.c | 403
> +++++++++++++++++++++++++-
> drivers/net/cpsw.c | 5 +-
> drivers/power/twl6035.c | 17 +-
> drivers/spi/omap3_spi.c | 76 +++--
> drivers/spi/omap3_spi.h | 1 +
> include/configs/am335x_evm.h | 50 ++++
> include/configs/cm_t35.h | 2 +-
> include/configs/dig297.h | 1 -
> include/configs/igep00x0.h | 1 -
> include/configs/m28evk.h | 2 +
> include/configs/mcx.h | 1 -
> include/configs/mx35pdk.h | 1 +
> include/configs/mx51evk.h | 4 -
> include/configs/mx53loco.h | 10 +-
> include/configs/mx6qsabre_common.h | 4 +-
> include/configs/mx6qsabreauto.h | 5 +
> include/configs/mx6qsabrelite.h | 2 +-
> include/configs/mx6qsabresd.h | 6 +
> include/configs/omap3_beagle.h | 2 +-
> include/configs/omap3_mvblx.h | 1 -
> include/configs/omap3_pandora.h | 1 -
> include/configs/omap3_sdp3430.h | 1 -
> include/configs/omap3_zoom1.h | 1 -
> include/configs/omap3_zoom2.h | 1 -
> include/configs/tam3517-common.h | 59 +++-
> include/configs/tricorder.h | 1 -
> include/image.h | 3 +
> include/twl6035.h | 2 +-
> tools/imximage.c | 9 +- 70 files
> changed, 1889 insertions(+), 290 deletions(-) create mode 100644
> arch/arm/cpu/armv7/am33xx/elm.c create mode 100644
> arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
> arch/arm/include/asm/arch-am33xx/elm.h create mode 100644
> arch/arm/include/asm/arch-am33xx/mem.h create mode 100644
> arch/arm/include/asm/arch-am33xx/omap_gpmc.h create mode 100644
> drivers/mtd/nand/am335x_spl_bch.c
>
I have some ARM patches starting here:
http://patchwork.ozlabs.org/patch/203071/
Do you expect to pick up some of these at some point?
Regards,
Simon
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2013-01-08 15:07 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
96764df1b47ddebfb50fadf5af72530b07b5fc89:
Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
+0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to 7528cf5f016b5b8b8b12b373f6f31a10bf89233d:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-01-08
14:59:37 +0100)
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Andreas Bie?mann (1):
omap3/mem.c: remove unused defines
Ashok (1):
mx35pdk:Use IMX_GPIO_NR macro
Davide Bonfanti (1):
davinci: fixed cpu reset
Fabio Estevam (6):
mx35pdk: Allow booting of a device tree kernel
mx53loco: Call PMIC related functions from board_late_init()
mx51evk: Remove unneeded comment
mx53loco: Remove unneeded 'retval' variable
mx53loco: Improve error handling on power_init()
tools: imximage: Load a size that is multiple of 512
Ilya Yanok (6):
OMAP: include sys_proto.h from boot-common
am335x_evm: add nand pinmux definition
am33xx: NAND support
am335x_evm: enable NAND support
am33xx_spl_bch: simple SPL nand loader for AM33XX
am335x_evm: enable SPL NAND support
Lokesh Vutla (1):
omap: emif: configure emif only when required
Mansoor Ahamed (2):
am33xx: add ELM support
omap_gpmc: BCH8 support (ELM based)
Marek Vasut (1):
mxs: Add NAND fdt and ramdisk partition to m28evk
Nikita Kiryanov (2):
gpio: add gpio_is_valid() to omap_gpio API
cm-t35: enable zero bootdelay check
Otavio Salvador (4):
mx53loco: We shouldn't hardcode a rootfs filesystem type
mx53loco: Change default loadaddr to 0x72000000
mx6qsabrelite: Change default loadaddr to 0x12000000
mx6qsabre_common: Change default loadaddr to 0x12000000
Peter Barada (1):
Pass sdrc timing values through board_sdrc_timings structure
Robert P. J. Day (4):
omap3_beagle.h: Fix comment for true/false return value.
omap3: Add a few comments to "#endif"s for readability.
omap4: Add comments on some "#endif"s for readability.
OMAP: Tweak omap-common/Makefile since reset.S -> reset.c
Shawn Guo (3):
fsl_esdhc: add MMC_MODE_HC host_caps
mx6qsabresd: add usdhc2 and usdhc4 support
mx6qsabresd: use on-board eMMC to store environment
Stefano Babic (2):
OMAP3: fix panel timing on the mt_ventoux board
OMAP3: TAM3517: add macros for reading eeprom
Thomas Weber (1):
OMAP3: Remove unused PHYS_SDRAM_1_SIZE
Vincent Stehl? (2):
omap24xx_i2c: Handle wait_for_bb error
power: twl6035: complain on LDO9 error
Yegor Yefremov (2):
am335x: disable internal delay for RGMII mode
am335x: cpsw: make phy address configurable
ajoy (1):
OMAP3 SPI : Fixed bugs related to SPI transfer
arch/arm/cpu/arm926ejs/davinci/reset.c | 2 +-
arch/arm/cpu/armv7/am33xx/Makefile | 2 +
arch/arm/cpu/armv7/am33xx/board.c | 1 +
arch/arm/cpu/armv7/am33xx/clock.c | 10 +
arch/arm/cpu/armv7/am33xx/elm.c | 212 ++++++++++++++
arch/arm/cpu/armv7/am33xx/mem.c | 101 +++++++
arch/arm/cpu/armv7/omap-common/Makefile | 5 +-
arch/arm/cpu/armv7/omap-common/boot-common.c | 1 +
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
arch/arm/cpu/armv7/omap3/board.c | 4 +-
arch/arm/cpu/armv7/omap3/mem.c | 18 +-
arch/arm/cpu/armv7/omap3/sdrc.c | 36 +--
arch/arm/cpu/armv7/omap4/clocks.c | 2 +-
arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 53 ++++
arch/arm/include/asm/arch-am33xx/elm.h | 93 ++++++
arch/arm/include/asm/arch-am33xx/hardware.h | 3 +
arch/arm/include/asm/arch-am33xx/mem.h | 83 ++++++
arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 120 ++++++++
arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 13 +-
arch/arm/include/asm/omap_gpio.h | 7 +
board/corscience/tricorder/tricorder.c | 13 +-
board/freescale/mx35pdk/mx35pdk.c | 2 +-
board/freescale/mx53loco/mx53loco.c | 84 ++++--
board/freescale/mx6qsabresd/mx6qsabresd.c | 80 ++++-
board/isee/igep0020/igep0020.c | 29 +-
board/isee/igep0030/igep0030.c | 29 +-
board/overo/overo.c | 37 ++-
board/technexion/twister/twister.c | 10 +-
board/teejet/mt_ventoux/mt_ventoux.c | 23 +-
board/ti/am335x/board.c | 4 +-
board/ti/am335x/mux.c | 22 ++
board/ti/beagle/beagle.c | 53 ++--
board/ti/evm/evm.c | 19 +-
board/timll/devkit8000/devkit8000.c | 13 +-
drivers/gpio/omap_gpio.c | 10 +-
drivers/i2c/omap24xx_i2c.c | 20 +-
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/mtd/nand/Makefile | 5 +-
drivers/mtd/nand/am335x_spl_bch.c | 238 +++++++++++++++
drivers/mtd/nand/omap_gpmc.c | 403
+++++++++++++++++++++++++-
drivers/net/cpsw.c | 5 +-
drivers/power/twl6035.c | 17 +-
drivers/spi/omap3_spi.c | 76 +++--
drivers/spi/omap3_spi.h | 1 +
include/configs/am335x_evm.h | 50 ++++
include/configs/cm_t35.h | 2 +-
include/configs/dig297.h | 1 -
include/configs/igep00x0.h | 1 -
include/configs/m28evk.h | 2 +
include/configs/mcx.h | 1 -
include/configs/mx35pdk.h | 1 +
include/configs/mx51evk.h | 4 -
include/configs/mx53loco.h | 10 +-
include/configs/mx6qsabre_common.h | 4 +-
include/configs/mx6qsabreauto.h | 5 +
include/configs/mx6qsabrelite.h | 2 +-
include/configs/mx6qsabresd.h | 6 +
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_mvblx.h | 1 -
include/configs/omap3_pandora.h | 1 -
include/configs/omap3_sdp3430.h | 1 -
include/configs/omap3_zoom1.h | 1 -
include/configs/omap3_zoom2.h | 1 -
include/configs/tam3517-common.h | 59 +++-
include/configs/tricorder.h | 1 -
include/image.h | 3 +
include/twl6035.h | 2 +-
tools/imximage.c | 9 +- 70 files
changed, 1889 insertions(+), 290 deletions(-) create mode 100644
arch/arm/cpu/armv7/am33xx/elm.c create mode 100644
arch/arm/cpu/armv7/am33xx/mem.c create mode 100644
arch/arm/include/asm/arch-am33xx/elm.h create mode 100644
arch/arm/include/asm/arch-am33xx/mem.h create mode 100644
arch/arm/include/asm/arch-am33xx/omap_gpmc.h create mode 100644
drivers/mtd/nand/am335x_spl_bch.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2013-01-03 6:41 ` Joonyoung Shim
@ 2013-01-03 7:12 ` Lukasz Majewski
0 siblings, 0 replies; 261+ messages in thread
From: Lukasz Majewski @ 2013-01-03 7:12 UTC (permalink / raw)
To: u-boot
Hi Albert,
> Hi Albert,
>
> 2012? 12? 22? ???? Albert ARIBAUD?? ??:
>
> > Hello Tom,
> >
> > The following changes since commit
> > 095728803eedfce850a2f85828f79500cb09979e:
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-net (2012-12-17
> > 18:39:50 -0700)
> >
> > are available in the git repository at:
> >
> >
> > git://git.denx.de/u-boot-arm master
> >
> > for you to fetch changes up to
> > 96764df1b47ddebfb50fadf5af72530b07b5fc89:
> >
> > Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22
> > 11:59:14 +0100)
> >
> > This pull request is specifically to get past the big merge issues
> > from u-boot-arm to u-boot which involved samsung, ixm and tegra
> > fixes, thanks to all those who took part in helping untie the knot.
> > Once this is in, I'll certainly have another pull request, early in
> > the coming week.
> >
> > ----------------------------------------------------------------
> >
> > Albert ARIBAUD (2):
> > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> > Merge samsung, imx, tegra into u-boot-arm/master
>
>
> From this merge commit, i found "arm:exynos4:pinmux: Modify the gpio
> function for mmc" commit codes are removed.
> It seems to be removed by manual merge with "exynos:pinmux: Add pinmux
> support for i2c" commit.
Joonyoung thanks for information. We have spotted this yesterday. Piotr
has prepared patch for fixing this (will be posted very soon).
After Piotr's patch Trats recognizes eMMC device again.
>
> Thanks.
>
>
> >
> > Allen Martin (2):
> > tegra: add CONSOLE_MUX support to tegra-kbc
> > Merge remote-tracking branch 'u-boot/master' into
> > u-boot-arm-merged
> >
> > Ashok Kumar Reddy (1):
> > ARM: arm1176: Define arch_cpu_init() for s3c64xx
> >
> > Beno?t Th?baudeau (17):
> > arm1136: Fix enable_caches()
> > mx31: Move EHCI definitions to ehci-fsl.h
> > ehci-mxc: Clean up
> > ehci-mx5: Clean up
> > ehci-mx5: Fix OC_DIS usage
> > ehci-mx5: Fix OPM usage
> > ehci-mx5: Fix *PM usage for i.MX53
> > ehci-mx5: Add missing OC_DIS for i.MX53
> > ehci-mxc: Make EHCI power/oc polarities configurable
> > ehci-mxc: Make i.MX25 EHCI configurable
> > ehci-mxc: Define host offsets
> > ehci-mxc: Add support for i.MX35
> > mx35pdk: Add support for OTG
> > ehci-mx5/6: Make board_ehci_hcd_init() optional
> > ehci-mxc: Fix host power mask bit for i.MX35
> > ehci-mxc: Fix host power mask bit for i.MX25
> > mx5: Mark lowlevel_init board-specific code
> >
> > Chander Kashyap (1):
> > Exynos5250: Enable PXE Support
> >
> > Fabio Estevam (28):
> > mx25pdk: Include CONFIG_MX25
> > mx25pdk: Add esdhc support
> > pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
> > mx25: Place common functions into sys_proto.h
> > pmic: Add support for mc34704
> > mx25pdk: Add Ethernet support
> > mx53loco: Allow booting a zImage kernel
> > mx25pdk: Allow booting a zImage kernel
> > mx51evk: Allow booting a zImage kernel
> > mx35pdk: Allow booting a zImage kernel
> > mx6qsabre_common: Allow booting a zImage kernel
> > mx5: Align SPI CS naming with i.MX53 reference manual
> > mx5: Print CSPI clock in 'clock' command
> > spi: mxc_spi: Fix handling of chip select
> > spi: mxc_spi: Fix spi clock glitch durant reset
> > mx6: clock: Only show CSPI clock if CSPI is enabled
> > mx28evk: Configure CONFIG_BOOTDELAY to one second
> > mx53loco: Configure CONFIG_BOOTDELAY to one second
> > mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
> > mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
> > mx51evk: Configure CONFIG_BOOTDELAY to one second
> > mx25pdk: Configure CONFIG_BOOTDELAY to one second
> > mx31pdk: Configure CONFIG_BOOTDELAY to one second
> > mx35pdk: Configure CONFIG_BOOTDELAY to one second
> > mx25pdk: Adapt it for the new PMIC framework
> > woodburn: Set gpio value in gpio_direction_output()
> > mx53loco: Fix PMIC name
> > mx25pdk: Allow booting a device tree kernel
> >
> > Hatim RV (3):
> > EXYNOS: Add clock for SPI
> > EXYNOS5: Add base address for SPI
> > EXYNOS5: Enable SPI
> >
> > Marek Vasut (9):
> > dm: wdt: Move s5p watchdog timer to drivers/watchdog/
> > mx28: Fix typo in POWER_MINPWR_VBG_OFF
> > mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
> > mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
> > mx28: Rename regs-power.h to regs-power-mx28.h
> > mxs: Silence elftosb
> > mxs: Implement common function to setup VDDx
> > mxs: Properly setup VDDD in power supply setup code
> > mxs: Staticize SPL functions
> >
> > Mayuresh Kulkarni (1):
> > tegra: Enable display/lcd support on Seaboard
> >
> > Minkyu Kang (6):
> > ARCH: EXYNOS: add support to match product id
> > EXYNOS: Clock: Add common function for pll rate calculation
> > s3c64xx: fix the compiler error and warning
> > Merge branch 'master' of git://git.denx.de/u-boot into resolve
> > universal_c210: fix compiler error and compiler warning
> > universal_c210: check the NULL pointer when get the PMIC
> >
> > Otavio Salvador (1):
> > mxs: SPL: Generalize memory initialization
> >
> > Piotr Wilczek (12):
> > arm:exynos4:trats: Correct SDRAM configuration for trats
> > arm:exynos4:trats: Fix SDRAM size
> > arm:exynos4:pinmux: Modify the gpio function for mmc
> > arm:exynos4:trats: Use pinmux for mmc configuration
> > arm:exynos4:universal: Use pinmux for mmc configuration
> > arm:exynos4:universal: Eliminated low level init
> > arm: trats: Power down core 1
> > exynos4: universal_C210: use software SPI
> > misc:max8998 Add LDO macros
> > drivers: video: Add ld9040 video driver
> > drivers: video: fix image position
> > exynos4: universal_C210: add display support
> >
> > Rajeshwari Shinde (16):
> > PMIC: MAX77686: Add support for MAX77686
> > SMDK5250: Config: Enable MAX77686 pmic chip
> > SOUND: SAMSUNG: Add I2S driver
> > SOUND: Add WM8994 codec
> > Sound: Add command for audio playback
> > EXYNOS: Add I2S registers
> > EXYNOS: Add parameters required by I2S
> > EXYNOS: Add pinmux for I2S
> > EXYNOS: Add I2S base address
> > EXYNOS: Add clock for I2S
> > SMDK5250: Enable Sound
> > EXYNOS5: Add pinmux support for SPI
> > SPI: Add SPI Driver for EXYNOS.
> > EXYNOS5: Enable SPI booting.
> > POWER: MAX77686: Modified as per the latest Implementation
> > SMDK5250: Enable pmic MAX77686
> >
> > Simon Glass (17):
> > pxa: Disable dcache on palmld, palmtc, zipitz2
> > tegra: Use const for pinmux_config_pingroup/table()
> > tegra: Add display support to funcmux
> > tegra: fdt: Add pwm binding and node
> > tegra: fdt: Add LCD definitions for Tegra
> > tegra: Add support for PWM
> > tegra: Add LCD driver
> > tegra: Add LCD support to Nvidia boards
> > arm: Add control over cachability of memory regions
> > lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
> > lcd: Add support for flushing LCD fb from dcache after update
> > tegra: Align LCD frame buffer to section boundary
> > tegra: Support control of cache settings for LCD
> > tegra: fdt: Add LCD definitions for Seaboard
> > lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
> > tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
> > tegra: config: seaboard: Move tegra-common-post to correct
> > place
> >
> > Stefano Babic (9):
> > ARM: Fix start.S when used with SPL in arm1136
> > MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
> > MX35: Add soc_boot_mode and soc_boot_device to MX35
> > SPL: Added SPL target for mx35 SOC to SPL Makefile
> > ARM: Add SPL target to arm1136
> > MX35: add support for woodburn board
> > MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
> > Merge git://git.denx.de/u-boot
> > Merge branch 'master' of git://git.denx.de/u-boot into master
> >
> > Stephen Warren (4):
> > ARM: tegra: TrimSlice: add support for USB1 port
> > mmc: tegra: support 4-bit operation too on 8-bit slots
> > ARM: tegra: enable 8-bit SD slots in board files
> > tegra: use generic fs commands in BOOTCOMMAND
> >
> > Troy Kisky (4):
> > mx6: soc: update get_cpu_rev and get_imx_type for
> > mx6solo/sololite mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
> > imx-common: cpu: add imx_ddr_size
> > arch-mx6: add mx6dl_pins.h
> >
> > Wei Ni (1):
> > tegra: Add SOC support for display/lcd
> >
> > ?ukasz Majewski (1):
> > gpio:fix: Proper handling of GPIO subsystem parts at Samsung
> > devices
> >
> > MAINTAINERS |
> > 1 + Makefile
> > | 4 +-
> > README |
> > 16 ++-
> > arch/arm/cpu/arm1136/config.mk |
> > 3 + arch/arm/cpu/arm1136/cpu.c
> > | 22 ++--
> > arch/arm/cpu/arm1136/mx35/Makefile |
> > 1 + arch/arm/cpu/arm1136/mx35/generic.c
> > | 75 +++++++++++
> > arch/arm/cpu/arm1136/mx35/mx35_sdram.c |
> > 137 ++++++++++++++++++++
> > arch/arm/cpu/arm1136/start.S |
> > 31 +++--
> > arch/arm/cpu/arm1136/u-boot-spl.lds |
> > 62 +++++++++
> > arch/arm/cpu/arm1176/s3c64xx/Makefile |
> > 2 +- arch/arm/cpu/arm1176/s3c64xx/init.c
> > | 26 ++++
> > arch/arm/cpu/arm926ejs/mxs/spl_boot.c |
> > 4 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> > | 38 +++---
> > arch/arm/cpu/arm926ejs/mxs/spl_power_init.c |
> > 305 ++++++++++++++++----------------------------
> > arch/arm/cpu/armv7/cache_v7.c |
> > 11 ++
> > arch/arm/cpu/armv7/exynos/clock.c |
> > 350 +++++++++++++++++++++++++++++++++++++++++----------
> > arch/arm/cpu/armv7/exynos/pinmux.c |
> > 64 ++++++++++
> > arch/arm/cpu/armv7/mx5/clock.c |
> > 4 +- arch/arm/cpu/armv7/mx5/lowlevel_init.S
> > | 2 +-
> > arch/arm/cpu/armv7/mx6/clock.c |
> > 2 + arch/arm/cpu/armv7/mx6/soc.c
> > | 32 +++--
> > arch/arm/cpu/armv7/s5p-common/Makefile |
> > 1 - arch/arm/cpu/armv7/tegra20/Makefile
> > | 2 +
> > arch/arm/cpu/armv7/tegra20/display.c |
> > 409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm/cpu/armv7/tegra20/pwm.c |
> > 101 +++++++++++++++
> > arch/arm/cpu/tegra20-common/funcmux.c |
> > 37 ++++++
> > arch/arm/cpu/tegra20-common/pinmux.c |
> > 4 +- arch/arm/dts/tegra20.dtsi
> > | 105 ++++++++++++++++
> > arch/arm/imx-common/cpu.c |
> > 66 ++++++++--
> > arch/arm/include/asm/arch-exynos/clk.h |
> > 4 + arch/arm/include/asm/arch-exynos/clock.h
> > | 29 +++++
> > arch/arm/include/asm/arch-exynos/cpu.h |
> > 18 +++
> > arch/arm/include/asm/arch-exynos/gpio.h |
> > 19 +++
> > arch/arm/include/asm/arch-exynos/i2s-regs.h |
> > 66 ++++++++++
> > arch/arm/include/asm/arch-exynos/periph.h |
> > 7 ++ arch/arm/include/asm/arch-exynos/sound.h
> > | 44 +++++++
> > arch/arm/include/asm/arch-exynos/spi.h |
> > 78 ++++++++++++
> > arch/arm/include/asm/arch-mx25/imx-regs.h |
> > 5 +- arch/arm/include/asm/arch-mx25/sys_proto.h
> > | 3 +
> > arch/arm/include/asm/arch-mx31/imx-regs.h |
> > 27 +---
> > arch/arm/include/asm/arch-mx35/imx-regs.h |
> > 4 + arch/arm/include/asm/arch-mx35/mmc_host_def.h
> > | 31 +++++
> > arch/arm/include/asm/arch-mx35/spl.h |
> > 38 ++++++
> > arch/arm/include/asm/arch-mx35/sys_proto.h |
> > 2 + arch/arm/include/asm/arch-mx5/mx5x_pins.h
> > | 6 +-
> > arch/arm/include/asm/arch-mx5/sys_proto.h |
> > 10 +-
> > arch/arm/include/asm/arch-mx6/imx-regs.h |
> > 2 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h
> > | 149 ++++++++++++++++++++++
> > arch/arm/include/asm/arch-mx6/sys_proto.h |
> > 10 +-
> > arch/arm/include/asm/arch-mxs/imx-regs.h |
> > 7 +- arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
> > | 6 +- arch/arm/include/asm/arch-mxs/{regs-power.h =>
> > regs-power-mx28.h} | 4 +-
> > arch/arm/include/asm/arch-s5pc1xx/gpio.h |
> > 7 +- arch/arm/include/asm/arch-tegra20/dc.h
> > | 545
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm/include/asm/arch-tegra20/display.h |
> > 152 ++++++++++++++++++++++
> > arch/arm/include/asm/arch-tegra20/pinmux.h |
> > 4 +- arch/arm/include/asm/arch-tegra20/pwm.h
> > | 75 +++++++++++
> > arch/arm/include/asm/system.h |
> > 31 +++++
> > arch/arm/lib/cache-cp15.c --
> > Albert.
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de <javascript:;>
> > http://lists.denx.de/mailman/listinfo/u-boot
> >
>
>
--
Best regards,
Lukasz Majewski
Samsung R&D Poland (SRPOL) | Linux Platform Group
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
@ 2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
1 sibling, 1 reply; 261+ messages in thread
From: Joonyoung Shim @ 2013-01-03 6:41 UTC (permalink / raw)
To: u-boot
Hi Albert,
2012? 12? 22? ???? Albert ARIBAUD?? ??:
> Hello Tom,
>
> The following changes since commit
> 095728803eedfce850a2f85828f79500cb09979e:
>
> Merge branch 'master' of git://git.denx.de/u-boot-net (2012-12-17
> 18:39:50 -0700)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 96764df1b47ddebfb50fadf5af72530b07b5fc89:
>
> Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
> +0100)
>
> This pull request is specifically to get past the big merge issues from
> u-boot-arm to u-boot which involved samsung, ixm and tegra fixes,
> thanks to all those who took part in helping untie the knot. Once this
> is in, I'll certainly have another pull request, early in the coming
> week.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge samsung, imx, tegra into u-boot-arm/master
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-12-22 12:11 Albert ARIBAUD
@ 2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
1 sibling, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-12-22 15:20 UTC (permalink / raw)
To: u-boot
On Sat, Dec 22, 2012 at 01:11:06PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 095728803eedfce850a2f85828f79500cb09979e:
>
> Merge branch 'master' of git://git.denx.de/u-boot-net (2012-12-17
> 18:39:50 -0700)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 96764df1b47ddebfb50fadf5af72530b07b5fc89:
>
> Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
> +0100)
>
> This pull request is specifically to get past the big merge issues from
> u-boot-arm to u-boot which involved samsung, ixm and tegra fixes,
> thanks to all those who took part in helping untie the knot. Once this
> is in, I'll certainly have another pull request, early in the coming
> week.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (2):
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
> Merge samsung, imx, tegra into u-boot-arm/master
>
> Allen Martin (2):
> tegra: add CONSOLE_MUX support to tegra-kbc
> Merge remote-tracking branch 'u-boot/master' into
> u-boot-arm-merged
>
> Ashok Kumar Reddy (1):
> ARM: arm1176: Define arch_cpu_init() for s3c64xx
>
> Beno??t Th??baudeau (17):
> arm1136: Fix enable_caches()
> mx31: Move EHCI definitions to ehci-fsl.h
> ehci-mxc: Clean up
> ehci-mx5: Clean up
> ehci-mx5: Fix OC_DIS usage
> ehci-mx5: Fix OPM usage
> ehci-mx5: Fix *PM usage for i.MX53
> ehci-mx5: Add missing OC_DIS for i.MX53
> ehci-mxc: Make EHCI power/oc polarities configurable
> ehci-mxc: Make i.MX25 EHCI configurable
> ehci-mxc: Define host offsets
> ehci-mxc: Add support for i.MX35
> mx35pdk: Add support for OTG
> ehci-mx5/6: Make board_ehci_hcd_init() optional
> ehci-mxc: Fix host power mask bit for i.MX35
> ehci-mxc: Fix host power mask bit for i.MX25
> mx5: Mark lowlevel_init board-specific code
>
> Chander Kashyap (1):
> Exynos5250: Enable PXE Support
>
> Fabio Estevam (28):
> mx25pdk: Include CONFIG_MX25
> mx25pdk: Add esdhc support
> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
> mx25: Place common functions into sys_proto.h
> pmic: Add support for mc34704
> mx25pdk: Add Ethernet support
> mx53loco: Allow booting a zImage kernel
> mx25pdk: Allow booting a zImage kernel
> mx51evk: Allow booting a zImage kernel
> mx35pdk: Allow booting a zImage kernel
> mx6qsabre_common: Allow booting a zImage kernel
> mx5: Align SPI CS naming with i.MX53 reference manual
> mx5: Print CSPI clock in 'clock' command
> spi: mxc_spi: Fix handling of chip select
> spi: mxc_spi: Fix spi clock glitch durant reset
> mx6: clock: Only show CSPI clock if CSPI is enabled
> mx28evk: Configure CONFIG_BOOTDELAY to one second
> mx53loco: Configure CONFIG_BOOTDELAY to one second
> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
> mx51evk: Configure CONFIG_BOOTDELAY to one second
> mx25pdk: Configure CONFIG_BOOTDELAY to one second
> mx31pdk: Configure CONFIG_BOOTDELAY to one second
> mx35pdk: Configure CONFIG_BOOTDELAY to one second
> mx25pdk: Adapt it for the new PMIC framework
> woodburn: Set gpio value in gpio_direction_output()
> mx53loco: Fix PMIC name
> mx25pdk: Allow booting a device tree kernel
>
> Hatim RV (3):
> EXYNOS: Add clock for SPI
> EXYNOS5: Add base address for SPI
> EXYNOS5: Enable SPI
>
> Marek Vasut (9):
> dm: wdt: Move s5p watchdog timer to drivers/watchdog/
> mx28: Fix typo in POWER_MINPWR_VBG_OFF
> mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
> mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
> mx28: Rename regs-power.h to regs-power-mx28.h
> mxs: Silence elftosb
> mxs: Implement common function to setup VDDx
> mxs: Properly setup VDDD in power supply setup code
> mxs: Staticize SPL functions
>
> Mayuresh Kulkarni (1):
> tegra: Enable display/lcd support on Seaboard
>
> Minkyu Kang (6):
> ARCH: EXYNOS: add support to match product id
> EXYNOS: Clock: Add common function for pll rate calculation
> s3c64xx: fix the compiler error and warning
> Merge branch 'master' of git://git.denx.de/u-boot into resolve
> universal_c210: fix compiler error and compiler warning
> universal_c210: check the NULL pointer when get the PMIC
>
> Otavio Salvador (1):
> mxs: SPL: Generalize memory initialization
>
> Piotr Wilczek (12):
> arm:exynos4:trats: Correct SDRAM configuration for trats
> arm:exynos4:trats: Fix SDRAM size
> arm:exynos4:pinmux: Modify the gpio function for mmc
> arm:exynos4:trats: Use pinmux for mmc configuration
> arm:exynos4:universal: Use pinmux for mmc configuration
> arm:exynos4:universal: Eliminated low level init
> arm: trats: Power down core 1
> exynos4: universal_C210: use software SPI
> misc:max8998 Add LDO macros
> drivers: video: Add ld9040 video driver
> drivers: video: fix image position
> exynos4: universal_C210: add display support
>
> Rajeshwari Shinde (16):
> PMIC: MAX77686: Add support for MAX77686
> SMDK5250: Config: Enable MAX77686 pmic chip
> SOUND: SAMSUNG: Add I2S driver
> SOUND: Add WM8994 codec
> Sound: Add command for audio playback
> EXYNOS: Add I2S registers
> EXYNOS: Add parameters required by I2S
> EXYNOS: Add pinmux for I2S
> EXYNOS: Add I2S base address
> EXYNOS: Add clock for I2S
> SMDK5250: Enable Sound
> EXYNOS5: Add pinmux support for SPI
> SPI: Add SPI Driver for EXYNOS.
> EXYNOS5: Enable SPI booting.
> POWER: MAX77686: Modified as per the latest Implementation
> SMDK5250: Enable pmic MAX77686
>
> Simon Glass (17):
> pxa: Disable dcache on palmld, palmtc, zipitz2
> tegra: Use const for pinmux_config_pingroup/table()
> tegra: Add display support to funcmux
> tegra: fdt: Add pwm binding and node
> tegra: fdt: Add LCD definitions for Tegra
> tegra: Add support for PWM
> tegra: Add LCD driver
> tegra: Add LCD support to Nvidia boards
> arm: Add control over cachability of memory regions
> lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
> lcd: Add support for flushing LCD fb from dcache after update
> tegra: Align LCD frame buffer to section boundary
> tegra: Support control of cache settings for LCD
> tegra: fdt: Add LCD definitions for Seaboard
> lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
> tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
> tegra: config: seaboard: Move tegra-common-post to correct place
>
> Stefano Babic (9):
> ARM: Fix start.S when used with SPL in arm1136
> MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
> MX35: Add soc_boot_mode and soc_boot_device to MX35
> SPL: Added SPL target for mx35 SOC to SPL Makefile
> ARM: Add SPL target to arm1136
> MX35: add support for woodburn board
> MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
> Merge git://git.denx.de/u-boot
> Merge branch 'master' of git://git.denx.de/u-boot into master
>
> Stephen Warren (4):
> ARM: tegra: TrimSlice: add support for USB1 port
> mmc: tegra: support 4-bit operation too on 8-bit slots
> ARM: tegra: enable 8-bit SD slots in board files
> tegra: use generic fs commands in BOOTCOMMAND
>
> Troy Kisky (4):
> mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
> mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
> imx-common: cpu: add imx_ddr_size
> arch-mx6: add mx6dl_pins.h
>
> Wei Ni (1):
> tegra: Add SOC support for display/lcd
>
> ??ukasz Majewski (1):
> gpio:fix: Proper handling of GPIO subsystem parts at Samsung
> devices
>
> MAINTAINERS |
> 1 + Makefile
> | 4 +-
> README |
> 16 ++-
> arch/arm/cpu/arm1136/config.mk |
> 3 + arch/arm/cpu/arm1136/cpu.c
> | 22 ++--
> arch/arm/cpu/arm1136/mx35/Makefile |
> 1 + arch/arm/cpu/arm1136/mx35/generic.c
> | 75 +++++++++++
> arch/arm/cpu/arm1136/mx35/mx35_sdram.c |
> 137 ++++++++++++++++++++
> arch/arm/cpu/arm1136/start.S |
> 31 +++--
> arch/arm/cpu/arm1136/u-boot-spl.lds |
> 62 +++++++++
> arch/arm/cpu/arm1176/s3c64xx/Makefile |
> 2 +- arch/arm/cpu/arm1176/s3c64xx/init.c
> | 26 ++++
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c |
> 4 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> | 38 +++---
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c |
> 305 ++++++++++++++++----------------------------
> arch/arm/cpu/armv7/cache_v7.c |
> 11 ++
> arch/arm/cpu/armv7/exynos/clock.c |
> 350 +++++++++++++++++++++++++++++++++++++++++----------
> arch/arm/cpu/armv7/exynos/pinmux.c |
> 64 ++++++++++
> arch/arm/cpu/armv7/mx5/clock.c |
> 4 +- arch/arm/cpu/armv7/mx5/lowlevel_init.S
> | 2 +-
> arch/arm/cpu/armv7/mx6/clock.c |
> 2 + arch/arm/cpu/armv7/mx6/soc.c
> | 32 +++--
> arch/arm/cpu/armv7/s5p-common/Makefile |
> 1 - arch/arm/cpu/armv7/tegra20/Makefile
> | 2 +
> arch/arm/cpu/armv7/tegra20/display.c |
> 409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/tegra20/pwm.c |
> 101 +++++++++++++++
> arch/arm/cpu/tegra20-common/funcmux.c |
> 37 ++++++
> arch/arm/cpu/tegra20-common/pinmux.c |
> 4 +- arch/arm/dts/tegra20.dtsi
> | 105 ++++++++++++++++
> arch/arm/imx-common/cpu.c |
> 66 ++++++++--
> arch/arm/include/asm/arch-exynos/clk.h |
> 4 + arch/arm/include/asm/arch-exynos/clock.h
> | 29 +++++
> arch/arm/include/asm/arch-exynos/cpu.h |
> 18 +++
> arch/arm/include/asm/arch-exynos/gpio.h |
> 19 +++
> arch/arm/include/asm/arch-exynos/i2s-regs.h |
> 66 ++++++++++
> arch/arm/include/asm/arch-exynos/periph.h |
> 7 ++ arch/arm/include/asm/arch-exynos/sound.h
> | 44 +++++++
> arch/arm/include/asm/arch-exynos/spi.h |
> 78 ++++++++++++
> arch/arm/include/asm/arch-mx25/imx-regs.h |
> 5 +- arch/arm/include/asm/arch-mx25/sys_proto.h
> | 3 +
> arch/arm/include/asm/arch-mx31/imx-regs.h |
> 27 +---
> arch/arm/include/asm/arch-mx35/imx-regs.h |
> 4 + arch/arm/include/asm/arch-mx35/mmc_host_def.h
> | 31 +++++
> arch/arm/include/asm/arch-mx35/spl.h |
> 38 ++++++
> arch/arm/include/asm/arch-mx35/sys_proto.h |
> 2 + arch/arm/include/asm/arch-mx5/mx5x_pins.h
> | 6 +-
> arch/arm/include/asm/arch-mx5/sys_proto.h |
> 10 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h |
> 2 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h
> | 149 ++++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h |
> 10 +-
> arch/arm/include/asm/arch-mxs/imx-regs.h |
> 7 +- arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
> | 6 +- arch/arm/include/asm/arch-mxs/{regs-power.h =>
> regs-power-mx28.h} | 4 +-
> arch/arm/include/asm/arch-s5pc1xx/gpio.h |
> 7 +- arch/arm/include/asm/arch-tegra20/dc.h
> | 545
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra20/display.h |
> 152 ++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra20/pinmux.h |
> 4 +- arch/arm/include/asm/arch-tegra20/pwm.h
> | 75 +++++++++++
> arch/arm/include/asm/system.h |
> 31 +++++
> arch/arm/lib/cache-cp15.c |
> 51 ++++++--
> board/compal/paz00/paz00.c |
> 5 +- board/compulab/dts/tegra20-trimslice.dts
> | 3 +-
> board/compulab/trimslice/trimslice.c |
> 8 ++ board/freescale/mx25pdk/mx25pdk.c
> | 121 ++++++++++++++++++
> board/freescale/mx31ads/u-boot.lds |
> 2 + board/freescale/mx35pdk/lowlevel_init.S
> | 4 +
> board/freescale/mx35pdk/mx35pdk.c |
> 21 ++++
> board/freescale/mx53loco/mx53loco.c |
> 2 +- board/nvidia/common/board.c
> | 24 ++++
> board/nvidia/dts/tegra20-seaboard.dts |
> 33 +++++
> board/nvidia/harmony/harmony.c |
> 5 +- board/nvidia/seaboard/seaboard.c
> | 5 +-
> board/samsung/smdk5250/Makefile |
> 2 +- board/samsung/smdk5250/smdk5250.c
> | 15 +++ board/samsung/smdk5250/{mmc_boot.c =>
> spl_boot.c} | 31 ++++-
> board/samsung/trats/trats.c |
> 80 ++++--------
> board/samsung/universal_c210/Makefile |
> 1 - board/samsung/universal_c210/lowlevel_init.S
> | 395 ---------------------------------------------------------
> board/samsung/universal_c210/universal.c |
> 337 ++++++++++++++++++++++++++++++++++++++-----------
> board/syteco/zmx25/zmx25.c |
> 1 + board/woodburn/Makefile
> | 43 +++++++
> board/woodburn/imximage.cfg |
> 4 + board/woodburn/lowlevel_init.S
> | 38 ++++++
> board/woodburn/woodburn.c |
> 264 +++++++++++++++++++++++++++++++++++++++
> boards.cfg |
> 2 + common/Makefile
> | 1 +
> common/cmd_sound.c |
> 96 ++++++++++++++
> common/lcd.c |
> 89 ++++++++++---
> common/main.c |
> 12 +-
> doc/README.imx5 |
> 5 + doc/device-tree-bindings/pwm/tegra20-pwm.txt
> | 18 +++
> doc/device-tree-bindings/video/displaymode.txt |
> 42 +++++++
> doc/device-tree-bindings/video/tegra20-dc.txt |
> 85 +++++++++++++
> drivers/gpio/mxc_gpio.c |
> 6 +- drivers/gpio/s5p_gpio.c
> | 6 +-
> drivers/input/tegra-kbc.c |
> 18 ++-
> drivers/mmc/tegra_mmc.c |
> 7 +- drivers/power/pmic/Makefile
> | 1 +
> drivers/power/pmic/pmic_max77686.c |
> 48 +++++++
> drivers/power/power_fsl.c |
> 8 +- drivers/serial/s3c64xx.c
> | 3 +-
> drivers/sound/Makefile |
> 48 +++++++
> drivers/sound/samsung-i2s.c |
> 358 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/sound/sound.c |
> 228 +++++++++++++++++++++++++++++++++
> drivers/sound/wm8994.c |
> 792
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/sound/wm8994.h |
> 87 +++++++++++++
> drivers/sound/wm8994_registers.h |
> 299 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/Makefile |
> 1 + drivers/spi/exynos_spi.c
> | 367 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/mxc_spi.c |
> 9 +- drivers/usb/host/ehci-mx5.c
> | 146 ++++++++++++++++++----
> drivers/usb/host/ehci-mx6.c |
> 5 + drivers/usb/host/ehci-mxc.c
> | 225 +++++++++++++++++++++++++--------
> drivers/video/Makefile |
> 2 + drivers/video/exynos_fb.c
> | 15 ++-
> drivers/video/ipu_regs.h |
> 2 +- drivers/video/ld9040.c
> | 144 +++++++++++++++++++++
> drivers/video/tegra.c |
> 379 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/watchdog/Makefile |
> 1 + arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
> | 0
> include/configs/harmony.h |
> 4 +- include/configs/mx25pdk.h
> | 43 ++++++-
> include/configs/mx28evk.h |
> 2 +- include/configs/mx31pdk.h
> | 2 +-
> include/configs/mx35pdk.h |
> 18 ++-
> include/configs/mx51_efikamx.h |
> 1 + include/configs/mx51evk.h
> | 5 +-
> include/configs/mx53evk.h |
> 1 + include/configs/mx53loco.h
> | 4 +-
> include/configs/mx6qarm2.h |
> 1 + include/configs/mx6qsabre_common.h
> | 4 +-
> include/configs/mx6qsabrelite.h |
> 3 +- include/configs/palmld.h
> | 3 +
> include/configs/palmtc.h |
> 3 + include/configs/paz00.h
> | 3 +
> include/configs/s5pc210_universal.h |
> 36 ++++++
> include/configs/seaboard.h |
> 16 ++-
> include/configs/smdk5250.h |
> 74 ++++++++++-
> include/configs/tec.h |
> 1 - include/configs/tegra-common-post.h
> | 43 +++----
> include/configs/tegra20-common.h |
> 3 + include/configs/trats.h
> | 17 ++-
> include/configs/trimslice.h |
> 4 + include/configs/ventana.h
> | 3 +
> include/configs/vision2.h |
> 1 + include/configs/whistler.h
> | 3 +
> include/configs/woodburn.h |
> 34 +++++
> include/configs/woodburn_common.h |
> 313 ++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/woodburn_sd.h |
> 60 +++++++++
> include/configs/zipitz2.h |
> 3 + include/configs/zmx25.h
> | 6 +-
> include/fdtdec.h |
> 2 + include/i2s.h
> | 127 +++++++++++++++++++
> include/lcd.h |
> 11 ++
> include/ld9040.h |
> 32 +++++
> include/mc34704.h |
> 49 ++++++++
> include/power/max77686_pmic.h |
> 158 +++++++++++++++++++++++
> include/power/max8998_pmic.h |
> 2 + include/sound.h
> | 62 +++++++++
> include/usb/ehci-fsl.h |
> 28 ++++-
> lib/fdtdec.c |
> 2 + nand_spl/board/freescale/mx31pdk/u-boot.lds
> | 2 +
> spl/Makefile |
> 6 + 163 files changed, 8451 insertions(+), 1094 deletions(-) create
> mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c create mode 100644
> arch/arm/cpu/arm1136/u-boot-spl.lds create mode 100644
> arch/arm/cpu/arm1176/s3c64xx/init.c create mode 100644
> arch/arm/cpu/armv7/tegra20/display.c create mode 100644
> arch/arm/cpu/armv7/tegra20/pwm.c create mode 100644
> arch/arm/include/asm/arch-exynos/i2s-regs.h create mode 100644
> arch/arm/include/asm/arch-exynos/sound.h create mode 100644
> arch/arm/include/asm/arch-exynos/spi.h create mode 100644
> arch/arm/include/asm/arch-mx35/mmc_host_def.h create mode 100644
> arch/arm/include/asm/arch-mx35/spl.h create mode 100644
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h rename
> arch/arm/include/asm/arch-mxs/{regs-power.h => regs-power-mx28.h}
> (99%) create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h create
> mode 100644 arch/arm/include/asm/arch-tegra20/display.h create mode
> 100644 arch/arm/include/asm/arch-tegra20/pwm.h rename
> board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) delete mode
> 100644 board/samsung/universal_c210/lowlevel_init.S create mode 100644
> board/woodburn/Makefile create mode 100644 board/woodburn/imximage.cfg
> create mode 100644 board/woodburn/lowlevel_init.S create mode 100644
> board/woodburn/woodburn.c create mode 100644 common/cmd_sound.c create
> mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode
> 100644 doc/device-tree-bindings/video/displaymode.txt create mode
> 100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode
> 100644 drivers/power/pmic/pmic_max77686.c create mode 100644
> drivers/sound/Makefile create mode 100644 drivers/sound/samsung-i2s.c
> create mode 100644 drivers/sound/sound.c create mode 100644
> drivers/sound/wm8994.c create mode 100644 drivers/sound/wm8994.h
> create mode 100644 drivers/sound/wm8994_registers.h create mode 100644
> drivers/spi/exynos_spi.c create mode 100644 drivers/video/ld9040.c
> create mode 100644 drivers/video/tegra.c rename
> arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
> (100%) create mode 100644 include/configs/woodburn.h create mode
> 100644 include/configs/woodburn_common.h create mode 100644
> include/configs/woodburn_sd.h create mode 100644 include/i2s.h create
> mode 100644 include/ld9040.h create mode 100644 include/mc34704.h
> create mode 100644 include/power/max77686_pmic.h create mode 100644
> include/sound.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121222/33bc92df/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2012-12-22 12:11 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
095728803eedfce850a2f85828f79500cb09979e:
Merge branch 'master' of git://git.denx.de/u-boot-net (2012-12-17
18:39:50 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 96764df1b47ddebfb50fadf5af72530b07b5fc89:
Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14
+0100)
This pull request is specifically to get past the big merge issues from
u-boot-arm to u-boot which involved samsung, ixm and tegra fixes,
thanks to all those who took part in helping untie the knot. Once this
is in, I'll certainly have another pull request, early in the coming
week.
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Merge samsung, imx, tegra into u-boot-arm/master
Allen Martin (2):
tegra: add CONSOLE_MUX support to tegra-kbc
Merge remote-tracking branch 'u-boot/master' into
u-boot-arm-merged
Ashok Kumar Reddy (1):
ARM: arm1176: Define arch_cpu_init() for s3c64xx
Beno?t Th?baudeau (17):
arm1136: Fix enable_caches()
mx31: Move EHCI definitions to ehci-fsl.h
ehci-mxc: Clean up
ehci-mx5: Clean up
ehci-mx5: Fix OC_DIS usage
ehci-mx5: Fix OPM usage
ehci-mx5: Fix *PM usage for i.MX53
ehci-mx5: Add missing OC_DIS for i.MX53
ehci-mxc: Make EHCI power/oc polarities configurable
ehci-mxc: Make i.MX25 EHCI configurable
ehci-mxc: Define host offsets
ehci-mxc: Add support for i.MX35
mx35pdk: Add support for OTG
ehci-mx5/6: Make board_ehci_hcd_init() optional
ehci-mxc: Fix host power mask bit for i.MX35
ehci-mxc: Fix host power mask bit for i.MX25
mx5: Mark lowlevel_init board-specific code
Chander Kashyap (1):
Exynos5250: Enable PXE Support
Fabio Estevam (28):
mx25pdk: Include CONFIG_MX25
mx25pdk: Add esdhc support
pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
mx25: Place common functions into sys_proto.h
pmic: Add support for mc34704
mx25pdk: Add Ethernet support
mx53loco: Allow booting a zImage kernel
mx25pdk: Allow booting a zImage kernel
mx51evk: Allow booting a zImage kernel
mx35pdk: Allow booting a zImage kernel
mx6qsabre_common: Allow booting a zImage kernel
mx5: Align SPI CS naming with i.MX53 reference manual
mx5: Print CSPI clock in 'clock' command
spi: mxc_spi: Fix handling of chip select
spi: mxc_spi: Fix spi clock glitch durant reset
mx6: clock: Only show CSPI clock if CSPI is enabled
mx28evk: Configure CONFIG_BOOTDELAY to one second
mx53loco: Configure CONFIG_BOOTDELAY to one second
mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
mx51evk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Configure CONFIG_BOOTDELAY to one second
mx31pdk: Configure CONFIG_BOOTDELAY to one second
mx35pdk: Configure CONFIG_BOOTDELAY to one second
mx25pdk: Adapt it for the new PMIC framework
woodburn: Set gpio value in gpio_direction_output()
mx53loco: Fix PMIC name
mx25pdk: Allow booting a device tree kernel
Hatim RV (3):
EXYNOS: Add clock for SPI
EXYNOS5: Add base address for SPI
EXYNOS5: Enable SPI
Marek Vasut (9):
dm: wdt: Move s5p watchdog timer to drivers/watchdog/
mx28: Fix typo in POWER_MINPWR_VBG_OFF
mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
mx28: Rename regs-power.h to regs-power-mx28.h
mxs: Silence elftosb
mxs: Implement common function to setup VDDx
mxs: Properly setup VDDD in power supply setup code
mxs: Staticize SPL functions
Mayuresh Kulkarni (1):
tegra: Enable display/lcd support on Seaboard
Minkyu Kang (6):
ARCH: EXYNOS: add support to match product id
EXYNOS: Clock: Add common function for pll rate calculation
s3c64xx: fix the compiler error and warning
Merge branch 'master' of git://git.denx.de/u-boot into resolve
universal_c210: fix compiler error and compiler warning
universal_c210: check the NULL pointer when get the PMIC
Otavio Salvador (1):
mxs: SPL: Generalize memory initialization
Piotr Wilczek (12):
arm:exynos4:trats: Correct SDRAM configuration for trats
arm:exynos4:trats: Fix SDRAM size
arm:exynos4:pinmux: Modify the gpio function for mmc
arm:exynos4:trats: Use pinmux for mmc configuration
arm:exynos4:universal: Use pinmux for mmc configuration
arm:exynos4:universal: Eliminated low level init
arm: trats: Power down core 1
exynos4: universal_C210: use software SPI
misc:max8998 Add LDO macros
drivers: video: Add ld9040 video driver
drivers: video: fix image position
exynos4: universal_C210: add display support
Rajeshwari Shinde (16):
PMIC: MAX77686: Add support for MAX77686
SMDK5250: Config: Enable MAX77686 pmic chip
SOUND: SAMSUNG: Add I2S driver
SOUND: Add WM8994 codec
Sound: Add command for audio playback
EXYNOS: Add I2S registers
EXYNOS: Add parameters required by I2S
EXYNOS: Add pinmux for I2S
EXYNOS: Add I2S base address
EXYNOS: Add clock for I2S
SMDK5250: Enable Sound
EXYNOS5: Add pinmux support for SPI
SPI: Add SPI Driver for EXYNOS.
EXYNOS5: Enable SPI booting.
POWER: MAX77686: Modified as per the latest Implementation
SMDK5250: Enable pmic MAX77686
Simon Glass (17):
pxa: Disable dcache on palmld, palmtc, zipitz2
tegra: Use const for pinmux_config_pingroup/table()
tegra: Add display support to funcmux
tegra: fdt: Add pwm binding and node
tegra: fdt: Add LCD definitions for Tegra
tegra: Add support for PWM
tegra: Add LCD driver
tegra: Add LCD support to Nvidia boards
arm: Add control over cachability of memory regions
lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
lcd: Add support for flushing LCD fb from dcache after update
tegra: Align LCD frame buffer to section boundary
tegra: Support control of cache settings for LCD
tegra: fdt: Add LCD definitions for Seaboard
lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
tegra: config: seaboard: Move tegra-common-post to correct place
Stefano Babic (9):
ARM: Fix start.S when used with SPL in arm1136
MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
MX35: Add soc_boot_mode and soc_boot_device to MX35
SPL: Added SPL target for mx35 SOC to SPL Makefile
ARM: Add SPL target to arm1136
MX35: add support for woodburn board
MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
Merge git://git.denx.de/u-boot
Merge branch 'master' of git://git.denx.de/u-boot into master
Stephen Warren (4):
ARM: tegra: TrimSlice: add support for USB1 port
mmc: tegra: support 4-bit operation too on 8-bit slots
ARM: tegra: enable 8-bit SD slots in board files
tegra: use generic fs commands in BOOTCOMMAND
Troy Kisky (4):
mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
imx-common: cpu: add imx_ddr_size
arch-mx6: add mx6dl_pins.h
Wei Ni (1):
tegra: Add SOC support for display/lcd
?ukasz Majewski (1):
gpio:fix: Proper handling of GPIO subsystem parts at Samsung
devices
MAINTAINERS |
1 + Makefile
| 4 +-
README |
16 ++-
arch/arm/cpu/arm1136/config.mk |
3 + arch/arm/cpu/arm1136/cpu.c
| 22 ++--
arch/arm/cpu/arm1136/mx35/Makefile |
1 + arch/arm/cpu/arm1136/mx35/generic.c
| 75 +++++++++++
arch/arm/cpu/arm1136/mx35/mx35_sdram.c |
137 ++++++++++++++++++++
arch/arm/cpu/arm1136/start.S |
31 +++--
arch/arm/cpu/arm1136/u-boot-spl.lds |
62 +++++++++
arch/arm/cpu/arm1176/s3c64xx/Makefile |
2 +- arch/arm/cpu/arm1176/s3c64xx/init.c
| 26 ++++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c |
4 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
| 38 +++---
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c |
305 ++++++++++++++++----------------------------
arch/arm/cpu/armv7/cache_v7.c |
11 ++
arch/arm/cpu/armv7/exynos/clock.c |
350 +++++++++++++++++++++++++++++++++++++++++----------
arch/arm/cpu/armv7/exynos/pinmux.c |
64 ++++++++++
arch/arm/cpu/armv7/mx5/clock.c |
4 +- arch/arm/cpu/armv7/mx5/lowlevel_init.S
| 2 +-
arch/arm/cpu/armv7/mx6/clock.c |
2 + arch/arm/cpu/armv7/mx6/soc.c
| 32 +++--
arch/arm/cpu/armv7/s5p-common/Makefile |
1 - arch/arm/cpu/armv7/tegra20/Makefile
| 2 +
arch/arm/cpu/armv7/tegra20/display.c |
409 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/tegra20/pwm.c |
101 +++++++++++++++
arch/arm/cpu/tegra20-common/funcmux.c |
37 ++++++
arch/arm/cpu/tegra20-common/pinmux.c |
4 +- arch/arm/dts/tegra20.dtsi
| 105 ++++++++++++++++
arch/arm/imx-common/cpu.c |
66 ++++++++--
arch/arm/include/asm/arch-exynos/clk.h |
4 + arch/arm/include/asm/arch-exynos/clock.h
| 29 +++++
arch/arm/include/asm/arch-exynos/cpu.h |
18 +++
arch/arm/include/asm/arch-exynos/gpio.h |
19 +++
arch/arm/include/asm/arch-exynos/i2s-regs.h |
66 ++++++++++
arch/arm/include/asm/arch-exynos/periph.h |
7 ++ arch/arm/include/asm/arch-exynos/sound.h
| 44 +++++++
arch/arm/include/asm/arch-exynos/spi.h |
78 ++++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h |
5 +- arch/arm/include/asm/arch-mx25/sys_proto.h
| 3 +
arch/arm/include/asm/arch-mx31/imx-regs.h |
27 +---
arch/arm/include/asm/arch-mx35/imx-regs.h |
4 + arch/arm/include/asm/arch-mx35/mmc_host_def.h
| 31 +++++
arch/arm/include/asm/arch-mx35/spl.h |
38 ++++++
arch/arm/include/asm/arch-mx35/sys_proto.h |
2 + arch/arm/include/asm/arch-mx5/mx5x_pins.h
| 6 +-
arch/arm/include/asm/arch-mx5/sys_proto.h |
10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h |
2 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h
| 149 ++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h |
10 +-
arch/arm/include/asm/arch-mxs/imx-regs.h |
7 +- arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h
| 6 +- arch/arm/include/asm/arch-mxs/{regs-power.h =>
regs-power-mx28.h} | 4 +-
arch/arm/include/asm/arch-s5pc1xx/gpio.h |
7 +- arch/arm/include/asm/arch-tegra20/dc.h
| 545
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/display.h |
152 ++++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/pinmux.h |
4 +- arch/arm/include/asm/arch-tegra20/pwm.h
| 75 +++++++++++
arch/arm/include/asm/system.h |
31 +++++
arch/arm/lib/cache-cp15.c |
51 ++++++--
board/compal/paz00/paz00.c |
5 +- board/compulab/dts/tegra20-trimslice.dts
| 3 +-
board/compulab/trimslice/trimslice.c |
8 ++ board/freescale/mx25pdk/mx25pdk.c
| 121 ++++++++++++++++++
board/freescale/mx31ads/u-boot.lds |
2 + board/freescale/mx35pdk/lowlevel_init.S
| 4 +
board/freescale/mx35pdk/mx35pdk.c |
21 ++++
board/freescale/mx53loco/mx53loco.c |
2 +- board/nvidia/common/board.c
| 24 ++++
board/nvidia/dts/tegra20-seaboard.dts |
33 +++++
board/nvidia/harmony/harmony.c |
5 +- board/nvidia/seaboard/seaboard.c
| 5 +-
board/samsung/smdk5250/Makefile |
2 +- board/samsung/smdk5250/smdk5250.c
| 15 +++ board/samsung/smdk5250/{mmc_boot.c =>
spl_boot.c} | 31 ++++-
board/samsung/trats/trats.c |
80 ++++--------
board/samsung/universal_c210/Makefile |
1 - board/samsung/universal_c210/lowlevel_init.S
| 395 ---------------------------------------------------------
board/samsung/universal_c210/universal.c |
337 ++++++++++++++++++++++++++++++++++++++-----------
board/syteco/zmx25/zmx25.c |
1 + board/woodburn/Makefile
| 43 +++++++
board/woodburn/imximage.cfg |
4 + board/woodburn/lowlevel_init.S
| 38 ++++++
board/woodburn/woodburn.c |
264 +++++++++++++++++++++++++++++++++++++++
boards.cfg |
2 + common/Makefile
| 1 +
common/cmd_sound.c |
96 ++++++++++++++
common/lcd.c |
89 ++++++++++---
common/main.c |
12 +-
doc/README.imx5 |
5 + doc/device-tree-bindings/pwm/tegra20-pwm.txt
| 18 +++
doc/device-tree-bindings/video/displaymode.txt |
42 +++++++
doc/device-tree-bindings/video/tegra20-dc.txt |
85 +++++++++++++
drivers/gpio/mxc_gpio.c |
6 +- drivers/gpio/s5p_gpio.c
| 6 +-
drivers/input/tegra-kbc.c |
18 ++-
drivers/mmc/tegra_mmc.c |
7 +- drivers/power/pmic/Makefile
| 1 +
drivers/power/pmic/pmic_max77686.c |
48 +++++++
drivers/power/power_fsl.c |
8 +- drivers/serial/s3c64xx.c
| 3 +-
drivers/sound/Makefile |
48 +++++++
drivers/sound/samsung-i2s.c |
358 ++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/sound/sound.c |
228 +++++++++++++++++++++++++++++++++
drivers/sound/wm8994.c |
792
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/sound/wm8994.h |
87 +++++++++++++
drivers/sound/wm8994_registers.h |
299 ++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/Makefile |
1 + drivers/spi/exynos_spi.c
| 367 +++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/mxc_spi.c |
9 +- drivers/usb/host/ehci-mx5.c
| 146 ++++++++++++++++++----
drivers/usb/host/ehci-mx6.c |
5 + drivers/usb/host/ehci-mxc.c
| 225 +++++++++++++++++++++++++--------
drivers/video/Makefile |
2 + drivers/video/exynos_fb.c
| 15 ++-
drivers/video/ipu_regs.h |
2 +- drivers/video/ld9040.c
| 144 +++++++++++++++++++++
drivers/video/tegra.c |
379 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/watchdog/Makefile |
1 + arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
| 0
include/configs/harmony.h |
4 +- include/configs/mx25pdk.h
| 43 ++++++-
include/configs/mx28evk.h |
2 +- include/configs/mx31pdk.h
| 2 +-
include/configs/mx35pdk.h |
18 ++-
include/configs/mx51_efikamx.h |
1 + include/configs/mx51evk.h
| 5 +-
include/configs/mx53evk.h |
1 + include/configs/mx53loco.h
| 4 +-
include/configs/mx6qarm2.h |
1 + include/configs/mx6qsabre_common.h
| 4 +-
include/configs/mx6qsabrelite.h |
3 +- include/configs/palmld.h
| 3 +
include/configs/palmtc.h |
3 + include/configs/paz00.h
| 3 +
include/configs/s5pc210_universal.h |
36 ++++++
include/configs/seaboard.h |
16 ++-
include/configs/smdk5250.h |
74 ++++++++++-
include/configs/tec.h |
1 - include/configs/tegra-common-post.h
| 43 +++----
include/configs/tegra20-common.h |
3 + include/configs/trats.h
| 17 ++-
include/configs/trimslice.h |
4 + include/configs/ventana.h
| 3 +
include/configs/vision2.h |
1 + include/configs/whistler.h
| 3 +
include/configs/woodburn.h |
34 +++++
include/configs/woodburn_common.h |
313 ++++++++++++++++++++++++++++++++++++++++++++++
include/configs/woodburn_sd.h |
60 +++++++++
include/configs/zipitz2.h |
3 + include/configs/zmx25.h
| 6 +-
include/fdtdec.h |
2 + include/i2s.h
| 127 +++++++++++++++++++
include/lcd.h |
11 ++
include/ld9040.h |
32 +++++
include/mc34704.h |
49 ++++++++
include/power/max77686_pmic.h |
158 +++++++++++++++++++++++
include/power/max8998_pmic.h |
2 + include/sound.h
| 62 +++++++++
include/usb/ehci-fsl.h |
28 ++++-
lib/fdtdec.c |
2 + nand_spl/board/freescale/mx31pdk/u-boot.lds
| 2 +
spl/Makefile |
6 + 163 files changed, 8451 insertions(+), 1094 deletions(-) create
mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c create mode 100644
arch/arm/cpu/arm1136/u-boot-spl.lds create mode 100644
arch/arm/cpu/arm1176/s3c64xx/init.c create mode 100644
arch/arm/cpu/armv7/tegra20/display.c create mode 100644
arch/arm/cpu/armv7/tegra20/pwm.c create mode 100644
arch/arm/include/asm/arch-exynos/i2s-regs.h create mode 100644
arch/arm/include/asm/arch-exynos/sound.h create mode 100644
arch/arm/include/asm/arch-exynos/spi.h create mode 100644
arch/arm/include/asm/arch-mx35/mmc_host_def.h create mode 100644
arch/arm/include/asm/arch-mx35/spl.h create mode 100644
arch/arm/include/asm/arch-mx6/mx6dl_pins.h rename
arch/arm/include/asm/arch-mxs/{regs-power.h => regs-power-mx28.h}
(99%) create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h create
mode 100644 arch/arm/include/asm/arch-tegra20/display.h create mode
100644 arch/arm/include/asm/arch-tegra20/pwm.h rename
board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) delete mode
100644 board/samsung/universal_c210/lowlevel_init.S create mode 100644
board/woodburn/Makefile create mode 100644 board/woodburn/imximage.cfg
create mode 100644 board/woodburn/lowlevel_init.S create mode 100644
board/woodburn/woodburn.c create mode 100644 common/cmd_sound.c create
mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode
100644 doc/device-tree-bindings/video/displaymode.txt create mode
100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode
100644 drivers/power/pmic/pmic_max77686.c create mode 100644
drivers/sound/Makefile create mode 100644 drivers/sound/samsung-i2s.c
create mode 100644 drivers/sound/sound.c create mode 100644
drivers/sound/wm8994.c create mode 100644 drivers/sound/wm8994.h
create mode 100644 drivers/sound/wm8994_registers.h create mode 100644
drivers/spi/exynos_spi.c create mode 100644 drivers/video/ld9040.c
create mode 100644 drivers/video/tegra.c rename
arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c
(100%) create mode 100644 include/configs/woodburn.h create mode
100644 include/configs/woodburn_common.h create mode 100644
include/configs/woodburn_sd.h create mode 100644 include/i2s.h create
mode 100644 include/ld9040.h create mode 100644 include/mc34704.h
create mode 100644 include/power/max77686_pmic.h create mode 100644
include/sound.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-11-05 19:45 ` Stephen Warren
@ 2012-11-08 15:08 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-11-08 15:08 UTC (permalink / raw)
To: u-boot
On Mon, Nov 05, 2012 at 12:45:42PM -0700, Stephen Warren wrote:
> On 11/05/2012 09:54 AM, Tom Rini wrote:
> > On Sun, Nov 04, 2012 at 10:51:23PM +0100, Albert ARIBAUD wrote:
> >
> >> Hello Tom,
> >>
> >> The following changes since commit
> >> b68d6712c379735e886ef9c01b946bc36f295273:
> >>
> >> ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
> >> (2012-10-26 23:46:21 +0200)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.denx.de/u-boot-arm master
> >>
> >> for you to fetch changes up to
> >> 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
> >>
> >> socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
> >>
> ...
> > Applied to u-boot/master, thanks!
>
> Did you push this out to the git server? I'd love to rebase my local
> branch on top of it and test. The last commit I see in u-boot/master
> is the EXTRAVERSION fixup.
Just the master -> public git sync delay, sorry.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121108/d0b4cb7e/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-11-05 16:54 ` Tom Rini
@ 2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Stephen Warren @ 2012-11-05 19:45 UTC (permalink / raw)
To: u-boot
On 11/05/2012 09:54 AM, Tom Rini wrote:
> On Sun, Nov 04, 2012 at 10:51:23PM +0100, Albert ARIBAUD wrote:
>
>> Hello Tom,
>>
>> The following changes since commit
>> b68d6712c379735e886ef9c01b946bc36f295273:
>>
>> ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
>> (2012-10-26 23:46:21 +0200)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm master
>>
>> for you to fetch changes up to
>> 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
>>
>> socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
>>
...
> Applied to u-boot/master, thanks!
Did you push this out to the git server? I'd love to rebase my local
branch on top of it and test. The last commit I see in u-boot/master
is the EXTRAVERSION fixup.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-11-04 21:51 Albert ARIBAUD
@ 2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
0 siblings, 1 reply; 261+ messages in thread
From: Tom Rini @ 2012-11-05 16:54 UTC (permalink / raw)
To: u-boot
On Sun, Nov 04, 2012 at 10:51:23PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> b68d6712c379735e886ef9c01b946bc36f295273:
>
> ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
> (2012-10-26 23:46:21 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
>
> socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (2):
> Merge remote-tracking branch 'u-boot-imx/master'
> Merge remote-tracking branch 'u-boot-ti/master'
>
> Allen Martin (5):
> SPL: make jump_to_image_no_args a weak symbol
> tegra: move to common SPL framework
> tegra20: initialize variable to avoid compiler warning
> serial: remove calls to serial_assign()
> arm720t: add back common.h include
>
> Andrew Bradford (4):
> am33xx: Enable UART{1,2,3,4,5} clocks
> am33xx: Enable UART{1,2,3,4,5} pin-mux
> serial: ns16550: Enable COM5 and COM6
> am335x_evm: Enable use of UART{1,2,3,4,5}
>
> Beno??t Th??baudeau (4):
> mx35: Clean up lowlevel_init
> mx35: Fix eSDHC clocks
> mxc: Fix SDHC multi-instance clock
> mx25: Clean up imx-regs.h
>
> Dirk Behme (1):
> mx6qsabrelite: enable DCache and MMC bounce buffer
>
> Eric Nelson (7):
> i.MX: iomux: input pad array can be const
> i.MX: declare iomux_v3_cfg_t arrays as const
> i.MX video: struct fb_videomode can be const
> i.MX: ipufb: add const to fb_videomode declarations
> i.MX6: set drive strength for parallel RGB pads
> i.MX6: add HDMI transmitter register declarations from kernel WIP.
> i.MX6: mx6qsabrelite: Add splash screen support
>
> Fabio Estevam (11):
> mx6qsabreauto: Pass the board revision to the kernel
> mx5: lowlevel_init.S: Split init_clock macro
> mx5: lowlevel_init.S: Fix PLL settings for mx53
> mx53loco: Adapt the IPU clock
> configs: mx53loco: Remove CONFIG_HAS_ETH1
> configs: mx51evk: Remove CONFIG_HAS_ETH1
> configs: mx53evk: Remove CONFIG_HAS_ETH1
> mx5: Add workaround for ARM erratum ID 468414
> mx25pdk: Use internal RAM for stack pointer
> mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
> mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: add missing cache configs
>
> Koen Kooi (1):
> am335x: add mux config for DDR3 version of beaglebone
>
> Lucas Stach (2):
> tegra: add Colibri T20 board support
> tegra: nand: make ONFI detection work
>
> Marc Dietrich (1):
> tegra: move common features to a common makefile
>
> Matthias Fuchs (1):
> am335x: add initial AM335x IDK board support
>
> Otavio Salvador (1):
> mx6qsabreauto: Change mmcroot so it works out of box
>
> Pali Roh??r (4):
> arm bootm: Allow to pass board specified atags
> Add power bus message definitions in twl4030.h
> cfb_console: Add support for some ANSI terminal escape codes
> New board support: Nokia RX-51 aka N900
>
> Raphael Assenat (1):
> eco5pk: Add new board and default config
>
> Stefano Babic (1):
> MX5: fix warning in clock.c
>
> Stephen Warren (10):
> ARM: tegra: define CONFIG_SYS_BOOTMAPSZ
> ARM: tegra: use standard variables to define load addresses
> ARM: tegra: Harmony: enable ULPI USB port
> ARM: tegra: Seaboard: enable multiple USB ports
> ARM: tegra: Whistler: remove unused USB alias
> ARM: enhance u-boot.lds to detect over-sized SPL
> ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it
> ARM: tegra: select between Seaboard/Ventana at compile time
> ARM: tegra: don't request GPIO from Seaboard's SPL
> ARM: tegra: combine duplicate Makefile rules
>
> Tom Rini (1):
> omap3: Rework board.c for !CONFIG_SYS_L2CACHE_OFF
>
> Troy Kisky (7):
> imximage: check dcd_len as entries added
> imximage: remove redundant setting of app_dest_ptr
> imximage: move flash_offset check to common location
> imximage: fix size of image to load.
> imximage: delay setting of image size
> imximage: change parameters to set_imx_hdr
> imximage: make set_imx_hdr_v1/v2 easier to read
>
> Vikram Narayanan (2):
> socfpga/spl: Remove timer_init from spl_board_init
> socfpga/spl: Remove malloc.h
>
> MAINTAINERS | 12 +
> Makefile | 15 +-
> README | 4 +
> arch/arm/cpu/arm1136/mx35/generic.c | 14 +-
> arch/arm/cpu/arm720t/interrupts.c | 2 +
> arch/arm/cpu/arm720t/tegra-common/spl.c | 91 +-
> arch/arm/cpu/armv7/am33xx/clock.c | 35 +
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 158 ++-
> arch/arm/cpu/armv7/omap3/board.c | 28 +-
> arch/arm/cpu/armv7/socfpga/spl.c | 4 -
> arch/arm/cpu/tegra20-common/emc.c | 2 +-
> arch/arm/cpu/u-boot.lds | 4 +
> arch/arm/imx-common/iomux-v3.c | 5 +-
> arch/arm/include/asm/arch-mx25/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mx35/clock.h | 4 +-
> arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 191 ++--
> arch/arm/include/asm/arch-mx5/imx-regs.h | 4 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 6 +
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 58 +-
> arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 1053
> ++++++++++++++++++++
> arch/arm/include/asm/arch-tegra20/spl.h | 28 +
> arch/arm/include/asm/imx-common/iomux-v3.h | 3 +-
> arch/arm/include/asm/setup.h | 5 +
> arch/arm/lib/bootm.c | 4 +
> board/8dtech/eco5pk/Makefile | 43 +
> board/8dtech/eco5pk/eco5pk.c | 61 ++
> board/8dtech/eco5pk/eco5pk.h | 404 ++++++++
> board/CarMediaLab/flea3/lowlevel_init.S | 41 -
> board/avionic-design/medcom-wide/Makefile | 6 +-
> board/avionic-design/plutux/Makefile | 6 +-
> board/avionic-design/tec/Makefile | 6 +-
> board/compal/paz00/Makefile | 6 +-
> board/compulab/trimslice/Makefile | 6 +-
> board/esg/ima3-mx53/ima3-mx53.c | 1 +
> board/freescale/mx35pdk/lowlevel_init.S | 119 +--
> board/freescale/mx35pdk/mx35pdk.c | 2 +
> board/freescale/mx35pdk/mx35pdk.h | 25 -
> board/freescale/mx51evk/mx51evk.c | 6 +-
> board/freescale/mx53ard/mx53ard.c | 4 +
> board/freescale/mx53evk/mx53evk.c | 4 +
> board/freescale/mx53loco/mx53loco.c | 5 +-
> board/freescale/mx53smd/mx53smd.c | 3 +
> board/freescale/mx6qarm2/mx6qarm2.c | 12 +-
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 55 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 350 ++++++-
> board/freescale/mx6qsabresd/mx6qsabresd.c | 7 +-
> board/genesi/mx51_efikamx/efikamx.c | 20 +-
> board/nokia/rx51/Makefile | 46 +
> board/nokia/rx51/lowlevel_init.S | 209 ++++
> board/nokia/rx51/rx51.c | 677
> +++++++++++++ board/nokia/rx51/rx51.h |
> 389 ++++++++ board/nokia/rx51/tag_omap.h | 311
> ++++++ board/nvidia/common/Makefile | 4 +-
> board/nvidia/common/common.mk | 4 +
> board/nvidia/dts/tegra20-harmony.dts | 3 +-
> board/nvidia/dts/tegra20-whistler.dts | 5 +-
> board/nvidia/harmony/harmony.c | 9 +
> board/nvidia/seaboard/seaboard.c | 18 +-
> board/ti/am335x/board.c | 24 +-
> board/ti/am335x/board.h | 5 +
> board/ti/am335x/mux.c | 80
> ++ .../colibri_t20-common/colibri_t20-common.c | 44
> + .../colibri_t20-common/colibri_t20-common.h | 16 +
> board/toradex/colibri_t20_iris/Makefile | 40 +
> board/toradex/colibri_t20_iris/colibri_t20_iris.c | 46 +
> board/toradex/dts/tegra20-colibri_t20_iris.dts | 38 +
> board/ttcontrol/vision2/vision2.c | 4 +-
> boards.cfg | 10 +-
> common/cmd_nvedit.c | 3 -
> common/iomux.c | 10 -
> common/spl/spl.c | 8 +-
> doc/README.nokia_rx51 | 104 ++
> drivers/mmc/fsl_esdhc.c | 5 +-
> drivers/mtd/nand/tegra_nand.c | 36 +
> drivers/serial/serial_ns16550.c | 36 +-
> drivers/video/cfb_console.c | 328 +++++-
> drivers/video/mxc_ipuv3_fb.c | 8 +-
> include/configs/am335x_evm.h | 12 +-
> include/configs/colibri_t20_iris.h | 83 ++
> include/configs/eb_cpux9k2.h | 5 +-
> include/configs/eco5pk.h | 81 ++
> include/configs/harmony.h | 3 +
> include/configs/mx25pdk.h | 11 +-
> include/configs/mx51evk.h | 1 -
> include/configs/mx53evk.h | 1 -
> include/configs/mx53loco.h | 3 +-
> include/configs/mx6qarm2.h | 3 +-
> include/configs/mx6qsabre_common.h | 5 +-
> include/configs/mx6qsabreauto.h | 3 +-
> include/configs/mx6qsabrelite.h | 18 +-
> include/configs/mx6qsabresd.h | 1 +
> include/configs/nokia_rx51.h | 452 +++++++++
> include/configs/seaboard.h | 1 +
> include/configs/tegra-common-post.h | 32 +-
> include/configs/tegra20-common.h | 10 +-
> include/fsl_esdhc.h | 1 +
> include/ipu_pixfmt.h | 4 +-
> include/twl4030.h | 98 ++
> tools/imximage.c | 102 +-
> tools/imximage.h | 6 +- 101 files
> changed, 5733 insertions(+), 653 deletions(-) create mode 100644
> arch/arm/include/asm/arch-mx6/mxc_hdmi.h create mode 100644
> arch/arm/include/asm/arch-tegra20/spl.h create mode 100644
> board/8dtech/eco5pk/Makefile create mode 100644
> board/8dtech/eco5pk/eco5pk.c create mode 100644
> board/8dtech/eco5pk/eco5pk.h create mode 100644
> board/nokia/rx51/Makefile create mode 100644
> board/nokia/rx51/lowlevel_init.S create mode 100644
> board/nokia/rx51/rx51.c create mode 100644 board/nokia/rx51/rx51.h
> create mode 100644 board/nokia/rx51/tag_omap.h
> create mode 100644 board/nvidia/common/common.mk
> create mode 100644
> board/toradex/colibri_t20-common/colibri_t20-common.c create mode
> 100644 board/toradex/colibri_t20-common/colibri_t20-common.h create
> mode 100644 board/toradex/colibri_t20_iris/Makefile create mode 100644
> board/toradex/colibri_t20_iris/colibri_t20_iris.c create mode 100644
> board/toradex/dts/tegra20-colibri_t20_iris.dts create mode 100644
> doc/README.nokia_rx51 create mode 100644
> include/configs/colibri_t20_iris.h create mode 100644
> include/configs/eco5pk.h create mode 100644
> include/configs/nokia_rx51.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121105/c72077ed/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-11-04 21:51 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
b68d6712c379735e886ef9c01b946bc36f295273:
ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
(2012-10-26 23:46:21 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 46d626d3926cf6b9f9c477782c5a0ee620a424cd:
socfpga/spl: Remove malloc.h (2012-11-04 16:23:23 +0100)
----------------------------------------------------------------
Albert ARIBAUD (2):
Merge remote-tracking branch 'u-boot-imx/master'
Merge remote-tracking branch 'u-boot-ti/master'
Allen Martin (5):
SPL: make jump_to_image_no_args a weak symbol
tegra: move to common SPL framework
tegra20: initialize variable to avoid compiler warning
serial: remove calls to serial_assign()
arm720t: add back common.h include
Andrew Bradford (4):
am33xx: Enable UART{1,2,3,4,5} clocks
am33xx: Enable UART{1,2,3,4,5} pin-mux
serial: ns16550: Enable COM5 and COM6
am335x_evm: Enable use of UART{1,2,3,4,5}
Beno?t Th?baudeau (4):
mx35: Clean up lowlevel_init
mx35: Fix eSDHC clocks
mxc: Fix SDHC multi-instance clock
mx25: Clean up imx-regs.h
Dirk Behme (1):
mx6qsabrelite: enable DCache and MMC bounce buffer
Eric Nelson (7):
i.MX: iomux: input pad array can be const
i.MX: declare iomux_v3_cfg_t arrays as const
i.MX video: struct fb_videomode can be const
i.MX: ipufb: add const to fb_videomode declarations
i.MX6: set drive strength for parallel RGB pads
i.MX6: add HDMI transmitter register declarations from kernel WIP.
i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam (11):
mx6qsabreauto: Pass the board revision to the kernel
mx5: lowlevel_init.S: Split init_clock macro
mx5: lowlevel_init.S: Fix PLL settings for mx53
mx53loco: Adapt the IPU clock
configs: mx53loco: Remove CONFIG_HAS_ETH1
configs: mx51evk: Remove CONFIG_HAS_ETH1
configs: mx53evk: Remove CONFIG_HAS_ETH1
mx5: Add workaround for ARM erratum ID 468414
mx25pdk: Use internal RAM for stack pointer
mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: cpux9k2: add missing cache configs
Koen Kooi (1):
am335x: add mux config for DDR3 version of beaglebone
Lucas Stach (2):
tegra: add Colibri T20 board support
tegra: nand: make ONFI detection work
Marc Dietrich (1):
tegra: move common features to a common makefile
Matthias Fuchs (1):
am335x: add initial AM335x IDK board support
Otavio Salvador (1):
mx6qsabreauto: Change mmcroot so it works out of box
Pali Roh?r (4):
arm bootm: Allow to pass board specified atags
Add power bus message definitions in twl4030.h
cfb_console: Add support for some ANSI terminal escape codes
New board support: Nokia RX-51 aka N900
Raphael Assenat (1):
eco5pk: Add new board and default config
Stefano Babic (1):
MX5: fix warning in clock.c
Stephen Warren (10):
ARM: tegra: define CONFIG_SYS_BOOTMAPSZ
ARM: tegra: use standard variables to define load addresses
ARM: tegra: Harmony: enable ULPI USB port
ARM: tegra: Seaboard: enable multiple USB ports
ARM: tegra: Whistler: remove unused USB alias
ARM: enhance u-boot.lds to detect over-sized SPL
ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it
ARM: tegra: select between Seaboard/Ventana at compile time
ARM: tegra: don't request GPIO from Seaboard's SPL
ARM: tegra: combine duplicate Makefile rules
Tom Rini (1):
omap3: Rework board.c for !CONFIG_SYS_L2CACHE_OFF
Troy Kisky (7):
imximage: check dcd_len as entries added
imximage: remove redundant setting of app_dest_ptr
imximage: move flash_offset check to common location
imximage: fix size of image to load.
imximage: delay setting of image size
imximage: change parameters to set_imx_hdr
imximage: make set_imx_hdr_v1/v2 easier to read
Vikram Narayanan (2):
socfpga/spl: Remove timer_init from spl_board_init
socfpga/spl: Remove malloc.h
MAINTAINERS | 12 +
Makefile | 15 +-
README | 4 +
arch/arm/cpu/arm1136/mx35/generic.c | 14 +-
arch/arm/cpu/arm720t/interrupts.c | 2 +
arch/arm/cpu/arm720t/tegra-common/spl.c | 91 +-
arch/arm/cpu/armv7/am33xx/clock.c | 35 +
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 158 ++-
arch/arm/cpu/armv7/omap3/board.c | 28 +-
arch/arm/cpu/armv7/socfpga/spl.c | 4 -
arch/arm/cpu/tegra20-common/emc.c | 2 +-
arch/arm/cpu/u-boot.lds | 4 +
arch/arm/imx-common/iomux-v3.c | 5 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx35/clock.h | 4 +-
arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 191 ++--
arch/arm/include/asm/arch-mx5/imx-regs.h | 4 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 6 +
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 58 +-
arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 1053
++++++++++++++++++++
arch/arm/include/asm/arch-tegra20/spl.h | 28 +
arch/arm/include/asm/imx-common/iomux-v3.h | 3 +-
arch/arm/include/asm/setup.h | 5 +
arch/arm/lib/bootm.c | 4 +
board/8dtech/eco5pk/Makefile | 43 +
board/8dtech/eco5pk/eco5pk.c | 61 ++
board/8dtech/eco5pk/eco5pk.h | 404 ++++++++
board/CarMediaLab/flea3/lowlevel_init.S | 41 -
board/avionic-design/medcom-wide/Makefile | 6 +-
board/avionic-design/plutux/Makefile | 6 +-
board/avionic-design/tec/Makefile | 6 +-
board/compal/paz00/Makefile | 6 +-
board/compulab/trimslice/Makefile | 6 +-
board/esg/ima3-mx53/ima3-mx53.c | 1 +
board/freescale/mx35pdk/lowlevel_init.S | 119 +--
board/freescale/mx35pdk/mx35pdk.c | 2 +
board/freescale/mx35pdk/mx35pdk.h | 25 -
board/freescale/mx51evk/mx51evk.c | 6 +-
board/freescale/mx53ard/mx53ard.c | 4 +
board/freescale/mx53evk/mx53evk.c | 4 +
board/freescale/mx53loco/mx53loco.c | 5 +-
board/freescale/mx53smd/mx53smd.c | 3 +
board/freescale/mx6qarm2/mx6qarm2.c | 12 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 55 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 350 ++++++-
board/freescale/mx6qsabresd/mx6qsabresd.c | 7 +-
board/genesi/mx51_efikamx/efikamx.c | 20 +-
board/nokia/rx51/Makefile | 46 +
board/nokia/rx51/lowlevel_init.S | 209 ++++
board/nokia/rx51/rx51.c | 677
+++++++++++++ board/nokia/rx51/rx51.h |
389 ++++++++ board/nokia/rx51/tag_omap.h | 311
++++++ board/nvidia/common/Makefile | 4 +-
board/nvidia/common/common.mk | 4 +
board/nvidia/dts/tegra20-harmony.dts | 3 +-
board/nvidia/dts/tegra20-whistler.dts | 5 +-
board/nvidia/harmony/harmony.c | 9 +
board/nvidia/seaboard/seaboard.c | 18 +-
board/ti/am335x/board.c | 24 +-
board/ti/am335x/board.h | 5 +
board/ti/am335x/mux.c | 80
++ .../colibri_t20-common/colibri_t20-common.c | 44
+ .../colibri_t20-common/colibri_t20-common.h | 16 +
board/toradex/colibri_t20_iris/Makefile | 40 +
board/toradex/colibri_t20_iris/colibri_t20_iris.c | 46 +
board/toradex/dts/tegra20-colibri_t20_iris.dts | 38 +
board/ttcontrol/vision2/vision2.c | 4 +-
boards.cfg | 10 +-
common/cmd_nvedit.c | 3 -
common/iomux.c | 10 -
common/spl/spl.c | 8 +-
doc/README.nokia_rx51 | 104 ++
drivers/mmc/fsl_esdhc.c | 5 +-
drivers/mtd/nand/tegra_nand.c | 36 +
drivers/serial/serial_ns16550.c | 36 +-
drivers/video/cfb_console.c | 328 +++++-
drivers/video/mxc_ipuv3_fb.c | 8 +-
include/configs/am335x_evm.h | 12 +-
include/configs/colibri_t20_iris.h | 83 ++
include/configs/eb_cpux9k2.h | 5 +-
include/configs/eco5pk.h | 81 ++
include/configs/harmony.h | 3 +
include/configs/mx25pdk.h | 11 +-
include/configs/mx51evk.h | 1 -
include/configs/mx53evk.h | 1 -
include/configs/mx53loco.h | 3 +-
include/configs/mx6qarm2.h | 3 +-
include/configs/mx6qsabre_common.h | 5 +-
include/configs/mx6qsabreauto.h | 3 +-
include/configs/mx6qsabrelite.h | 18 +-
include/configs/mx6qsabresd.h | 1 +
include/configs/nokia_rx51.h | 452 +++++++++
include/configs/seaboard.h | 1 +
include/configs/tegra-common-post.h | 32 +-
include/configs/tegra20-common.h | 10 +-
include/fsl_esdhc.h | 1 +
include/ipu_pixfmt.h | 4 +-
include/twl4030.h | 98 ++
tools/imximage.c | 102 +-
tools/imximage.h | 6 +- 101 files
changed, 5733 insertions(+), 653 deletions(-) create mode 100644
arch/arm/include/asm/arch-mx6/mxc_hdmi.h create mode 100644
arch/arm/include/asm/arch-tegra20/spl.h create mode 100644
board/8dtech/eco5pk/Makefile create mode 100644
board/8dtech/eco5pk/eco5pk.c create mode 100644
board/8dtech/eco5pk/eco5pk.h create mode 100644
board/nokia/rx51/Makefile create mode 100644
board/nokia/rx51/lowlevel_init.S create mode 100644
board/nokia/rx51/rx51.c create mode 100644 board/nokia/rx51/rx51.h
create mode 100644 board/nokia/rx51/tag_omap.h
create mode 100644 board/nvidia/common/common.mk
create mode 100644
board/toradex/colibri_t20-common/colibri_t20-common.c create mode
100644 board/toradex/colibri_t20-common/colibri_t20-common.h create
mode 100644 board/toradex/colibri_t20_iris/Makefile create mode 100644
board/toradex/colibri_t20_iris/colibri_t20_iris.c create mode 100644
board/toradex/dts/tegra20-colibri_t20_iris.dts create mode 100644
doc/README.nokia_rx51 create mode 100644
include/configs/colibri_t20_iris.h create mode 100644
include/configs/eco5pk.h create mode 100644
include/configs/nokia_rx51.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-10-26 22:30 Albert ARIBAUD
@ 2012-10-27 0:20 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-10-27 0:20 UTC (permalink / raw)
To: u-boot
On Sat, Oct 27, 2012 at 12:30:46AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 186fc4db263fc6332d6712be99a9a387087d29c7:
>
> ColdFire: Add Freescale MCF54418TWR ColdFire development board
> support (2012-10-24 22:27:46 +0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to b68d6712c379735e886ef9c01b946bc36f295273:
>
> ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
> (2012-10-26 23:46:21 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (3):
> Merge remote-tracking branch 'u-boot-ti/master'
> Merge remote-tracking branch 'u-boot-atmel/master'
> arm: arm925t: remove SX1 board
>
> Andrew Bradford (1):
> configs: Fix usage of mmc rescan
>
> Annamalai Lakshmanan (1):
> Origen: Add default clock settings for multimedia IPs
>
> Igor Grinberg (1):
> cm-t35: clean unused defines from config
>
> Joel A Fernandes (1):
> am33xx: Enable DDR3 for DDR3 version of beaglebone
>
> Marek Vasut (6):
> arm: Remove support for lpc2292
> arm: Remove support for s3c4510
> arm: Remove support for NETARM
> stdio: Remove the CLPS7111 serial driver
> arm720: Further clean up the arm720t directory
> arm720: Remove CONFIG_ARM7_REVD
>
> Pankaj Bharadiya (1):
> USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY
>
> Peter Korsgaard (7):
> omap3_spi: introduce CONFIG_OMAP3_SPI_D0_D1_SWAPPED
> am33xx/board.c: make wdtimer/uart_base static
> am33xx: move ti i2c baseboard header handling to board/ti/am335x/
> am33xx/board: use cpu_mmc_init() for default mmc initialization
> am33xx: move generic parts of pinmux handling out from
> board/ti/am335x am33xx: support board specific ddr settings
> am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part
> numbers
>
> Stefano Babic (5):
> OMAP3: mt_ventoux: power on USB at startup
> OMAP3: updated pinmux and environment for new revision of mcx
> board OMAP3: mcx: updated to new hardware revision
> VIDEO: add macro to set LCD size for DSS driver
> OMAP3: add video support to the mcx board
>
> Stephen Warren (1):
> ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
>
> Tom Rini (2):
> omapimage: Add support for byteswapped SPI images
> am33xx: Add SPI SPL as an option
>
> Vaibhav Hiremath (1):
> am335x: Enable RTC 32K OSC clock
>
> Wu, Josh (3):
> mmc: at91: add multi block read/write support.
> ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
> mmc: at91: use max timeout value. It will avoid some situation
> that timeout happened.
>
> Yann Vernier (1):
> arm: ks8695: use defined constants for UART
>
> CREDITS | 5 -
> Makefile | 14 -
> arch/arm/cpu/arm720t/cpu.c | 32 +-
> arch/arm/cpu/arm720t/interrupts.c | 249 +-----------
> arch/arm/cpu/arm720t/lpc2292/Makefile | 50 ---
> arch/arm/cpu/arm720t/lpc2292/flash.c | 249 ------------
> arch/arm/cpu/arm720t/lpc2292/iap_entry.S | 7 -
> arch/arm/cpu/arm720t/lpc2292/mmc.c | 131 -------
> arch/arm/cpu/arm720t/lpc2292/mmc_hw.c | 233 ------------
> arch/arm/cpu/arm720t/lpc2292/mmc_hw.h | 29 --
> arch/arm/cpu/arm720t/lpc2292/spi.c | 40 --
> arch/arm/cpu/arm720t/s3c4510b/Makefile | 45 ---
> arch/arm/cpu/arm720t/s3c4510b/cache.c | 86 -----
> arch/arm/cpu/arm720t/start.S | 185 +--------
> arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 6 +-
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +
> arch/arm/cpu/armv7/am33xx/Makefile | 1 +
> arch/arm/cpu/armv7/am33xx/board.c | 239 +-----------
> arch/arm/cpu/armv7/am33xx/clock.c | 6 +
> arch/arm/cpu/armv7/am33xx/config.mk | 1 +
> arch/arm/cpu/armv7/am33xx/emif4.c | 114 +-----
> arch/arm/cpu/armv7/am33xx/mux.c | 33 ++
> arch/arm/cpu/u-boot.lds | 8 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 15 +
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 69 ++--
> arch/arm/include/asm/arch-am33xx/hardware.h | 4 +
> arch/arm/include/asm/arch-am33xx/mux.h | 261 +++++++++++++
> arch/arm/include/asm/arch-am33xx/spl.h | 1 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 27 --
> arch/arm/include/asm/arch-arm720t/hardware.h | 4 +-
> .../include/asm/arch-arm720t/netarm_dma_module.h | 182 ---------
> .../include/asm/arch-arm720t/netarm_eni_module.h | 121 ------
> .../include/asm/arch-arm720t/netarm_eth_module.h | 160 --------
> .../include/asm/arch-arm720t/netarm_gen_module.h | 186 ---------
> .../include/asm/arch-arm720t/netarm_mem_module.h | 184 ---------
> .../include/asm/arch-arm720t/netarm_registers.h | 96 -----
> .../include/asm/arch-arm720t/netarm_ser_module.h | 347
> ----------------- arch/arm/include/asm/arch-lpc2292/hardware.h
> | 33 -- .../include/asm/arch-lpc2292/lpc2292_registers.h | 225
> ----------- arch/arm/include/asm/arch-lpc2292/spi.h | 82
> ---- arch/arm/include/asm/arch-omap3/dss.h | 1 +
> arch/arm/include/asm/arch-s3c4510b/hardware.h | 272
> -------------- board/atmel/at91sam9x5ek/at91sam9x5ek.c |
> 10 + board/htkw/mcx/mcx.c | 48 ++-
> board/htkw/mcx/mcx.h | 30 +-
> board/samsung/origen/lowlevel_init.S | 37 +-
> board/samsung/origen/origen_setup.h | 74 ++++
> board/sx1/Makefile | 45 ---
> board/sx1/config.mk | 19 -
> board/sx1/lowlevel_init.S | 397
> --------------------
> board/sx1/sx1.c | 123 ------
> board/teejet/mt_ventoux/mt_ventoux.c | 8 +
> board/ti/am335x/Makefile | 1 +
> board/ti/am335x/board.c | 376
> ++++++++++++++++++ board/ti/am335x/board.h
> | 49 +++ board/ti/am335x/mux.c | 250
> +----------- doc/README.scrapyard | 3
> +- doc/driver-model/UDM-serial.txt | 30 +-
> drivers/i2c/soft_i2c.c | 3 -
> drivers/mmc/gen_atmel_mci.c | 15 +-
> drivers/net/Makefile | 1 -
> drivers/net/netarm_eth.c | 352
> ----------------- drivers/net/netarm_eth.h
> | 42 --- drivers/serial/Makefile | 4 -
> drivers/serial/s3c4510b_uart.c | 231 ------------
> drivers/serial/s3c4510b_uart.h | 109 ------
> drivers/serial/serial.c | 6 -
> drivers/serial/serial_clps7111.c | 134 -------
> drivers/serial/serial_lpc2292.c | 117 ------
> drivers/serial/serial_netarm.c | 204 ----------
> drivers/spi/omap3_spi.c | 11 +-
> drivers/usb/musb/musb_udc.c | 11 +-
> include/atmel_mci.h | 7 +-
> include/clps7111.h | 276
> -------------- include/configs/SX1.h |
> 189 ---------- include/configs/am335x_evm.h |
> 9 +- include/configs/am3517_crane.h | 2 +-
> include/configs/am3517_evm.h | 2 +-
> include/configs/at91sam9x5ek.h | 10 +
> include/configs/cm_t35.h | 14 +-
> include/configs/devkit8000.h | 2 +-
> include/configs/igep00x0.h | 2 +-
> include/configs/mcx.h | 31 +-
> include/configs/mx28evk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53ard.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qarm2.h | 2 +-
> include/configs/mx6qsabrelite.h | 2 +-
> include/configs/omap3_beagle.h | 2 +-
> include/configs/omap3_evm.h | 2 +-
> include/configs/omap3_logic.h | 2 +-
> include/configs/omap3_overo.h | 2 +-
> include/configs/omap3_zoom1.h | 2 +-
> include/configs/omap4_common.h | 2 +-
> include/configs/omap5_evm.h | 2 +-
> include/configs/tricorder.h | 2 +-
> include/flash.h | 1 -
> spl/Makefile | 9 +-
> tools/omapimage.c | 83 +++- 102
> files changed, 1193 insertions(+), 6264 deletions(-) delete mode
> 100644 arch/arm/cpu/arm720t/lpc2292/Makefile delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/flash.c delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/iap_entry.S delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/mmc.c delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/mmc_hw.c delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/mmc_hw.h delete mode 100644
> arch/arm/cpu/arm720t/lpc2292/spi.c delete mode 100644
> arch/arm/cpu/arm720t/s3c4510b/Makefile delete mode 100644
> arch/arm/cpu/arm720t/s3c4510b/cache.c create mode 100644
> arch/arm/cpu/armv7/am33xx/mux.c create mode 100644
> arch/arm/include/asm/arch-am33xx/mux.h delete mode 100644
> arch/arm/include/asm/arch-arm720t/netarm_dma_module.h delete mode
> 100644 arch/arm/include/asm/arch-arm720t/netarm_eni_module.h delete
> mode 100644 arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
> delete mode 100644
> arch/arm/include/asm/arch-arm720t/netarm_gen_module.h delete mode
> 100644 arch/arm/include/asm/arch-arm720t/netarm_mem_module.h delete
> mode 100644 arch/arm/include/asm/arch-arm720t/netarm_registers.h
> delete mode 100644
> arch/arm/include/asm/arch-arm720t/netarm_ser_module.h delete mode
> 100644 arch/arm/include/asm/arch-lpc2292/hardware.h delete mode 100644
> arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h delete mode
> 100644 arch/arm/include/asm/arch-lpc2292/spi.h delete mode 100644
> arch/arm/include/asm/arch-s3c4510b/hardware.h delete mode 100644
> board/sx1/Makefile delete mode 100644 board/sx1/config.mk delete mode
> 100644 board/sx1/lowlevel_init.S delete mode 100644 board/sx1/sx1.c
> create mode 100644 board/ti/am335x/board.c create mode 100644
> board/ti/am335x/board.h delete mode 100644 drivers/net/netarm_eth.c
> delete mode 100644 drivers/net/netarm_eth.h
> delete mode 100644 drivers/serial/s3c4510b_uart.c
> delete mode 100644 drivers/serial/s3c4510b_uart.h
> delete mode 100644 drivers/serial/serial_clps7111.c
> delete mode 100644 drivers/serial/serial_lpc2292.c
> delete mode 100644 drivers/serial/serial_netarm.c
> delete mode 100644 include/clps7111.h
> delete mode 100644 include/configs/SX1.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121026/1bb3d2ba/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-10-26 22:30 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
186fc4db263fc6332d6712be99a9a387087d29c7:
ColdFire: Add Freescale MCF54418TWR ColdFire development board
support (2012-10-24 22:27:46 +0800)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to b68d6712c379735e886ef9c01b946bc36f295273:
ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
(2012-10-26 23:46:21 +0200)
----------------------------------------------------------------
Albert ARIBAUD (3):
Merge remote-tracking branch 'u-boot-ti/master'
Merge remote-tracking branch 'u-boot-atmel/master'
arm: arm925t: remove SX1 board
Andrew Bradford (1):
configs: Fix usage of mmc rescan
Annamalai Lakshmanan (1):
Origen: Add default clock settings for multimedia IPs
Igor Grinberg (1):
cm-t35: clean unused defines from config
Joel A Fernandes (1):
am33xx: Enable DDR3 for DDR3 version of beaglebone
Marek Vasut (6):
arm: Remove support for lpc2292
arm: Remove support for s3c4510
arm: Remove support for NETARM
stdio: Remove the CLPS7111 serial driver
arm720: Further clean up the arm720t directory
arm720: Remove CONFIG_ARM7_REVD
Pankaj Bharadiya (1):
USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY
Peter Korsgaard (7):
omap3_spi: introduce CONFIG_OMAP3_SPI_D0_D1_SWAPPED
am33xx/board.c: make wdtimer/uart_base static
am33xx: move ti i2c baseboard header handling to board/ti/am335x/
am33xx/board: use cpu_mmc_init() for default mmc initialization
am33xx: move generic parts of pinmux handling out from
board/ti/am335x am33xx: support board specific ddr settings
am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part
numbers
Stefano Babic (5):
OMAP3: mt_ventoux: power on USB at startup
OMAP3: updated pinmux and environment for new revision of mcx
board OMAP3: mcx: updated to new hardware revision
VIDEO: add macro to set LCD size for DSS driver
OMAP3: add video support to the mcx board
Stephen Warren (1):
ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections
Tom Rini (2):
omapimage: Add support for byteswapped SPI images
am33xx: Add SPI SPL as an option
Vaibhav Hiremath (1):
am335x: Enable RTC 32K OSC clock
Wu, Josh (3):
mmc: at91: add multi block read/write support.
ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
mmc: at91: use max timeout value. It will avoid some situation
that timeout happened.
Yann Vernier (1):
arm: ks8695: use defined constants for UART
CREDITS | 5 -
Makefile | 14 -
arch/arm/cpu/arm720t/cpu.c | 32 +-
arch/arm/cpu/arm720t/interrupts.c | 249 +-----------
arch/arm/cpu/arm720t/lpc2292/Makefile | 50 ---
arch/arm/cpu/arm720t/lpc2292/flash.c | 249 ------------
arch/arm/cpu/arm720t/lpc2292/iap_entry.S | 7 -
arch/arm/cpu/arm720t/lpc2292/mmc.c | 131 -------
arch/arm/cpu/arm720t/lpc2292/mmc_hw.c | 233 ------------
arch/arm/cpu/arm720t/lpc2292/mmc_hw.h | 29 --
arch/arm/cpu/arm720t/lpc2292/spi.c | 40 --
arch/arm/cpu/arm720t/s3c4510b/Makefile | 45 ---
arch/arm/cpu/arm720t/s3c4510b/cache.c | 86 -----
arch/arm/cpu/arm720t/start.S | 185 +--------
arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 6 +-
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +
arch/arm/cpu/armv7/am33xx/Makefile | 1 +
arch/arm/cpu/armv7/am33xx/board.c | 239 +-----------
arch/arm/cpu/armv7/am33xx/clock.c | 6 +
arch/arm/cpu/armv7/am33xx/config.mk | 1 +
arch/arm/cpu/armv7/am33xx/emif4.c | 114 +-----
arch/arm/cpu/armv7/am33xx/mux.c | 33 ++
arch/arm/cpu/u-boot.lds | 8 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 15 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 69 ++--
arch/arm/include/asm/arch-am33xx/hardware.h | 4 +
arch/arm/include/asm/arch-am33xx/mux.h | 261 +++++++++++++
arch/arm/include/asm/arch-am33xx/spl.h | 1 +
arch/arm/include/asm/arch-am33xx/sys_proto.h | 27 --
arch/arm/include/asm/arch-arm720t/hardware.h | 4 +-
.../include/asm/arch-arm720t/netarm_dma_module.h | 182 ---------
.../include/asm/arch-arm720t/netarm_eni_module.h | 121 ------
.../include/asm/arch-arm720t/netarm_eth_module.h | 160 --------
.../include/asm/arch-arm720t/netarm_gen_module.h | 186 ---------
.../include/asm/arch-arm720t/netarm_mem_module.h | 184 ---------
.../include/asm/arch-arm720t/netarm_registers.h | 96 -----
.../include/asm/arch-arm720t/netarm_ser_module.h | 347
----------------- arch/arm/include/asm/arch-lpc2292/hardware.h
| 33 -- .../include/asm/arch-lpc2292/lpc2292_registers.h | 225
----------- arch/arm/include/asm/arch-lpc2292/spi.h | 82
---- arch/arm/include/asm/arch-omap3/dss.h | 1 +
arch/arm/include/asm/arch-s3c4510b/hardware.h | 272
-------------- board/atmel/at91sam9x5ek/at91sam9x5ek.c |
10 + board/htkw/mcx/mcx.c | 48 ++-
board/htkw/mcx/mcx.h | 30 +-
board/samsung/origen/lowlevel_init.S | 37 +-
board/samsung/origen/origen_setup.h | 74 ++++
board/sx1/Makefile | 45 ---
board/sx1/config.mk | 19 -
board/sx1/lowlevel_init.S | 397
--------------------
board/sx1/sx1.c | 123 ------
board/teejet/mt_ventoux/mt_ventoux.c | 8 +
board/ti/am335x/Makefile | 1 +
board/ti/am335x/board.c | 376
++++++++++++++++++ board/ti/am335x/board.h
| 49 +++ board/ti/am335x/mux.c | 250
+----------- doc/README.scrapyard | 3
+- doc/driver-model/UDM-serial.txt | 30 +-
drivers/i2c/soft_i2c.c | 3 -
drivers/mmc/gen_atmel_mci.c | 15 +-
drivers/net/Makefile | 1 -
drivers/net/netarm_eth.c | 352
----------------- drivers/net/netarm_eth.h
| 42 --- drivers/serial/Makefile | 4 -
drivers/serial/s3c4510b_uart.c | 231 ------------
drivers/serial/s3c4510b_uart.h | 109 ------
drivers/serial/serial.c | 6 -
drivers/serial/serial_clps7111.c | 134 -------
drivers/serial/serial_lpc2292.c | 117 ------
drivers/serial/serial_netarm.c | 204 ----------
drivers/spi/omap3_spi.c | 11 +-
drivers/usb/musb/musb_udc.c | 11 +-
include/atmel_mci.h | 7 +-
include/clps7111.h | 276
-------------- include/configs/SX1.h |
189 ---------- include/configs/am335x_evm.h |
9 +- include/configs/am3517_crane.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/at91sam9x5ek.h | 10 +
include/configs/cm_t35.h | 14 +-
include/configs/devkit8000.h | 2 +-
include/configs/igep00x0.h | 2 +-
include/configs/mcx.h | 31 +-
include/configs/mx28evk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qarm2.h | 2 +-
include/configs/mx6qsabrelite.h | 2 +-
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omap3_logic.h | 2 +-
include/configs/omap3_overo.h | 2 +-
include/configs/omap3_zoom1.h | 2 +-
include/configs/omap4_common.h | 2 +-
include/configs/omap5_evm.h | 2 +-
include/configs/tricorder.h | 2 +-
include/flash.h | 1 -
spl/Makefile | 9 +-
tools/omapimage.c | 83 +++- 102
files changed, 1193 insertions(+), 6264 deletions(-) delete mode
100644 arch/arm/cpu/arm720t/lpc2292/Makefile delete mode 100644
arch/arm/cpu/arm720t/lpc2292/flash.c delete mode 100644
arch/arm/cpu/arm720t/lpc2292/iap_entry.S delete mode 100644
arch/arm/cpu/arm720t/lpc2292/mmc.c delete mode 100644
arch/arm/cpu/arm720t/lpc2292/mmc_hw.c delete mode 100644
arch/arm/cpu/arm720t/lpc2292/mmc_hw.h delete mode 100644
arch/arm/cpu/arm720t/lpc2292/spi.c delete mode 100644
arch/arm/cpu/arm720t/s3c4510b/Makefile delete mode 100644
arch/arm/cpu/arm720t/s3c4510b/cache.c create mode 100644
arch/arm/cpu/armv7/am33xx/mux.c create mode 100644
arch/arm/include/asm/arch-am33xx/mux.h delete mode 100644
arch/arm/include/asm/arch-arm720t/netarm_dma_module.h delete mode
100644 arch/arm/include/asm/arch-arm720t/netarm_eni_module.h delete
mode 100644 arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
delete mode 100644
arch/arm/include/asm/arch-arm720t/netarm_gen_module.h delete mode
100644 arch/arm/include/asm/arch-arm720t/netarm_mem_module.h delete
mode 100644 arch/arm/include/asm/arch-arm720t/netarm_registers.h
delete mode 100644
arch/arm/include/asm/arch-arm720t/netarm_ser_module.h delete mode
100644 arch/arm/include/asm/arch-lpc2292/hardware.h delete mode 100644
arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h delete mode
100644 arch/arm/include/asm/arch-lpc2292/spi.h delete mode 100644
arch/arm/include/asm/arch-s3c4510b/hardware.h delete mode 100644
board/sx1/Makefile delete mode 100644 board/sx1/config.mk delete mode
100644 board/sx1/lowlevel_init.S delete mode 100644 board/sx1/sx1.c
create mode 100644 board/ti/am335x/board.c create mode 100644
board/ti/am335x/board.h delete mode 100644 drivers/net/netarm_eth.c
delete mode 100644 drivers/net/netarm_eth.h
delete mode 100644 drivers/serial/s3c4510b_uart.c
delete mode 100644 drivers/serial/s3c4510b_uart.h
delete mode 100644 drivers/serial/serial_clps7111.c
delete mode 100644 drivers/serial/serial_lpc2292.c
delete mode 100644 drivers/serial/serial_netarm.c
delete mode 100644 include/clps7111.h
delete mode 100644 include/configs/SX1.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-10-19 23:55 Albert ARIBAUD
@ 2012-10-20 17:39 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-10-20 17:39 UTC (permalink / raw)
To: u-boot
On Sat, Oct 20, 2012 at 01:55:42AM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> bd23b22badadcdc414a900828253961fc5ec6c39:
>
> Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging
> (2012-10-15 13:37:22 -0700)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 39826f09978a0a7070999acc15babf88f03e4051:
>
> arm: fdt: Relocate fdt along with other data (2012-10-19 21:38:27
> +0200)
>
> ----------------------------------------------------------------
> 402jagan at gmail.com (1):
> versatile: board configs: Use buffered writes on flash
>
> Albert ARIBAUD (1):
> Remove lh7a40x cpu and serial driver
>
> Marek Vasut (2):
> dm: wdt: arm: Move tnetv107x into drivers/watchdog/
> dm: Move s3c24xx USB driver to a proper place
>
> Simon Glass (1):
> arm: fdt: Relocate fdt along with other data
>
> Tom Rini (1):
> actux[123]: Update linker script for ELDK 4.2
>
> ??ukasz Da??ek (1):
> h2200: Add support for iPAQ h2200 palmtop
>
> MAINTAINERS | 4 +
> arch/arm/cpu/arm1176/tnetv107x/Makefile | 2 +-
> arch/arm/cpu/arm920t/s3c24x0/Makefile | 3 -
> arch/arm/cpu/arm920t/s3c24x0/usb.c | 71 ---
> arch/arm/cpu/lh7a40x/config.mk | 33 --
> arch/arm/cpu/lh7a40x/cpu.c | 65 ---
> arch/arm/cpu/lh7a40x/speed.c | 83 ----
> arch/arm/cpu/lh7a40x/start.S | 506
> --------------------
> arch/arm/cpu/lh7a40x/timer.c | 182 -------
> arch/arm/lib/board.c | 22 +
> board/actux1/u-boot.lds | 2 +-
> board/actux2/u-boot.lds | 2 +-
> board/actux3/u-boot.lds | 2 +-
> {arch/arm/cpu/lh7a40x => board/h2200}/Makefile | 26 +-
> board/h2200/h2200-header.S | 27 ++
> board/h2200/h2200.c | 53 ++
> boards.cfg | 1 +
> doc/driver-model/UDM-serial.txt | 32 +-
> drivers/serial/Makefile | 1 -
> drivers/serial/serial_lh7a40x.c | 204 --------
> drivers/usb/gadget/gadget_chips.h | 34 +-
> drivers/usb/host/Makefile | 1
> + .../usb_ohci.c => drivers/usb/host/ohci-s3c24xx.c | 46
> +- .../usb_ohci.h => drivers/usb/host/ohci-s3c24xx.h | 0
> drivers/watchdog/Makefile | 1 + .../wdt.c
> => drivers/watchdog/tnetv107x_wdt.c | 0
> include/configs/VCMA9.h | 1 +
> include/configs/ca9x4_ct_vxp.h | 2 +
> include/configs/h2200.h | 157 ++++++
> include/configs/smdk2410.h | 1 +
> include/configs/tnetv107x_evm.h | 1 +
> include/configs/versatile.h | 1 +
> include/lh7a400.h | 75 ---
> include/lh7a404.h | 83 ----
> include/lh7a40x.h | 279 -----------
> include/lpd7a400_cpld.h | 195 -------- 36
> files changed, 362 insertions(+), 1836 deletions(-) delete mode 100644
> arch/arm/cpu/arm920t/s3c24x0/usb.c delete mode 100644
> arch/arm/cpu/lh7a40x/config.mk delete mode 100644
> arch/arm/cpu/lh7a40x/cpu.c delete mode 100644
> arch/arm/cpu/lh7a40x/speed.c delete mode 100644
> arch/arm/cpu/lh7a40x/start.S delete mode 100644
> arch/arm/cpu/lh7a40x/timer.c rename {arch/arm/cpu/lh7a40x =>
> board/h2200}/Makefile (71%) create mode 100644
> board/h2200/h2200-header.S create mode 100644 board/h2200/h2200.c
> delete mode 100644 drivers/serial/serial_lh7a40x.c
> rename arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c =>
> drivers/usb/host/ohci-s3c24xx.c (97%) rename
> arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h =>
> drivers/usb/host/ohci-s3c24xx.h (100%) rename
> arch/arm/cpu/arm1176/tnetv107x/wdt.c =>
> drivers/watchdog/tnetv107x_wdt.c (100%) create mode 100644
> include/configs/h2200.h delete mode 100644 include/lh7a400.h delete
> mode 100644 include/lh7a404.h delete mode 100644 include/lh7a40x.h
> delete mode 100644 include/lpd7a400_cpld.h
Applied to u-boot/master with a trivial conflict fixed up, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121020/ca951915/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-10-19 23:55 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit
bd23b22badadcdc414a900828253961fc5ec6c39:
Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging
(2012-10-15 13:37:22 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 39826f09978a0a7070999acc15babf88f03e4051:
arm: fdt: Relocate fdt along with other data (2012-10-19 21:38:27
+0200)
----------------------------------------------------------------
402jagan at gmail.com (1):
versatile: board configs: Use buffered writes on flash
Albert ARIBAUD (1):
Remove lh7a40x cpu and serial driver
Marek Vasut (2):
dm: wdt: arm: Move tnetv107x into drivers/watchdog/
dm: Move s3c24xx USB driver to a proper place
Simon Glass (1):
arm: fdt: Relocate fdt along with other data
Tom Rini (1):
actux[123]: Update linker script for ELDK 4.2
?ukasz Da?ek (1):
h2200: Add support for iPAQ h2200 palmtop
MAINTAINERS | 4 +
arch/arm/cpu/arm1176/tnetv107x/Makefile | 2 +-
arch/arm/cpu/arm920t/s3c24x0/Makefile | 3 -
arch/arm/cpu/arm920t/s3c24x0/usb.c | 71 ---
arch/arm/cpu/lh7a40x/config.mk | 33 --
arch/arm/cpu/lh7a40x/cpu.c | 65 ---
arch/arm/cpu/lh7a40x/speed.c | 83 ----
arch/arm/cpu/lh7a40x/start.S | 506
--------------------
arch/arm/cpu/lh7a40x/timer.c | 182 -------
arch/arm/lib/board.c | 22 +
board/actux1/u-boot.lds | 2 +-
board/actux2/u-boot.lds | 2 +-
board/actux3/u-boot.lds | 2 +-
{arch/arm/cpu/lh7a40x => board/h2200}/Makefile | 26 +-
board/h2200/h2200-header.S | 27 ++
board/h2200/h2200.c | 53 ++
boards.cfg | 1 +
doc/driver-model/UDM-serial.txt | 32 +-
drivers/serial/Makefile | 1 -
drivers/serial/serial_lh7a40x.c | 204 --------
drivers/usb/gadget/gadget_chips.h | 34 +-
drivers/usb/host/Makefile | 1
+ .../usb_ohci.c => drivers/usb/host/ohci-s3c24xx.c | 46
+- .../usb_ohci.h => drivers/usb/host/ohci-s3c24xx.h | 0
drivers/watchdog/Makefile | 1 + .../wdt.c
=> drivers/watchdog/tnetv107x_wdt.c | 0
include/configs/VCMA9.h | 1 +
include/configs/ca9x4_ct_vxp.h | 2 +
include/configs/h2200.h | 157 ++++++
include/configs/smdk2410.h | 1 +
include/configs/tnetv107x_evm.h | 1 +
include/configs/versatile.h | 1 +
include/lh7a400.h | 75 ---
include/lh7a404.h | 83 ----
include/lh7a40x.h | 279 -----------
include/lpd7a400_cpld.h | 195 -------- 36
files changed, 362 insertions(+), 1836 deletions(-) delete mode 100644
arch/arm/cpu/arm920t/s3c24x0/usb.c delete mode 100644
arch/arm/cpu/lh7a40x/config.mk delete mode 100644
arch/arm/cpu/lh7a40x/cpu.c delete mode 100644
arch/arm/cpu/lh7a40x/speed.c delete mode 100644
arch/arm/cpu/lh7a40x/start.S delete mode 100644
arch/arm/cpu/lh7a40x/timer.c rename {arch/arm/cpu/lh7a40x =>
board/h2200}/Makefile (71%) create mode 100644
board/h2200/h2200-header.S create mode 100644 board/h2200/h2200.c
delete mode 100644 drivers/serial/serial_lh7a40x.c
rename arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c =>
drivers/usb/host/ohci-s3c24xx.c (97%) rename
arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h =>
drivers/usb/host/ohci-s3c24xx.h (100%) rename
arch/arm/cpu/arm1176/tnetv107x/wdt.c =>
drivers/watchdog/tnetv107x_wdt.c (100%) create mode 100644
include/configs/h2200.h delete mode 100644 include/lh7a400.h delete
mode 100644 include/lh7a404.h delete mode 100644 include/lh7a40x.h
delete mode 100644 include/lpd7a400_cpld.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-10-05 19:26 Albert ARIBAUD
@ 2012-10-05 22:26 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-10-05 22:26 UTC (permalink / raw)
To: u-boot
On Fri, Oct 05, 2012 at 09:26:17PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 777544085d2b417a36df50eb564bf037a044e60e:
>
> ARM: Add Altera SOCFPGA Cyclone5 (2012-10-04 18:11:52 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad:
>
> arm: armv7: temporarily set -mno-unaligned-access (2012-10-05
> 21:24:22 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> arm: armv7: temporarily set -mno-unaligned-access
>
> Tetsuyuki Kobayashi (1):
> MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
>
> MAINTAINERS | 1 +
> arch/arm/cpu/armv7/config.mk | 2 ++
> 2 files changed, 3 insertions(+)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121005/b3881468/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-10-05 19:26 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
777544085d2b417a36df50eb564bf037a044e60e:
ARM: Add Altera SOCFPGA Cyclone5 (2012-10-04 18:11:52 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad:
arm: armv7: temporarily set -mno-unaligned-access (2012-10-05
21:24:22 +0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
arm: armv7: temporarily set -mno-unaligned-access
Tetsuyuki Kobayashi (1):
MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
MAINTAINERS | 1 +
arch/arm/cpu/armv7/config.mk | 2 ++
2 files changed, 3 insertions(+)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-10-04 16:57 Albert ARIBAUD
@ 2012-10-04 18:31 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-10-04 18:31 UTC (permalink / raw)
To: u-boot
On Thu, Oct 04, 2012 at 06:57:02PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
>
> sandbox: Add asm/errno.h (2012-09-29 10:00:29 -0700)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 777544085d2b417a36df50eb564bf037a044e60e:
>
> ARM: Add Altera SOCFPGA Cyclone5 (2012-10-04 18:11:52 +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (5):
> Merge remote-tracking branch 'u-boot-atmel/master'
> Merge remote-tracking branch 'u-boot-imx/master'
> Merge remote-tracking branch 'u-boot/master'
> edminiv2: increase malloc len to 256K
> Merge remote-tracking branch 'u-boot-marvell/master'
>
> Allen Martin (2):
> tools, config.mk: add binutils-version
> arm: work around assembler bug
>
> Andreas Bie??mann (1):
> devkit8000: add rootwait to mmcboot option
>
> Bastian Ruppert (6):
> davinci: ea20: reorganisation LCD startup
> davinci: ea20: the console is always set to the serial line
> video: cfb_console: logo can be positioned via the splashpos
> variable video: cfb_console: add function to plot the logo area black
> da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
> davinci: ea20: add some configs and default environmet variables
>
> Beno??t Th??baudeau (3):
> mx51evk: Add CONFIG_REVISION_TAG
> KARO TX25: Fix NAND Flash R/W cycle times
> armv7 cpu_init_crit: Simplify code
>
> Bo Shen (3):
> spi: add atmel at25df321 serial flash support
> spiflash: at25: using common spi flash operation
> Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
>
> Dinh Nguyen (2):
> ARM: kirkwood/orion5x: Use reset_cpu definition in
> include/common.h ARM: Add Altera SOCFPGA Cyclone5
>
> Eric Nelson (2):
> i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
> frame buffer i.MX: shut down video before launch of O/S
>
> Fabio Estevam (1):
> mx28evk: Remove fecmxc_mii_postcall()
>
> Gabriel Huau (2):
> ARM : Add GPIO Driver and IOMUX definition for S3C2440
> ARM : Add support for MINI2440 (s3c2440).
>
> Gerlando Falauto (2):
> kirkwood: implement kw_sdram_bs_set()
> kirkwood: implement kw_sdram_size_adjust
>
> Hideyuki Sano (1):
> arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board
>
> Holger Brunck (2):
> kirkwood: use c-struct for access to SDRAM addr decode registers
> arm/km: use kw_sdram_size_adjust to adjust SDRAM size
>
> Ilya Yanok (4):
> net/bootp: add VCI support for BOOTP also
> OMAP: spl: call timer_init() from SPL
> am335x_evm: enable networking in SPL
> OMAP: networking support for SPL
>
> Joe Hershberger (1):
> arm: Add CONFIG_OF_BOARD_SETUP support to bootm
>
> Joel A Fernandes (1):
> am33xx: Fix fetching of mmc1 bootmode from bootrom for AM33XX
>
> Koen Kooi (1):
> am335x-evm config: decrease bootdelay to 1s and mount rootfs RO
>
> Luka Perkov (2):
> kirkwood: fix mpp.h coding style
> kirkwood: add support for Iomega iConnect board
>
> Michael Walle (1):
> lsxl: also turn off fan in power down mode
>
> Michal Simek (4):
> arm: Remove additional config flags
> serial: Add Zynq serial driver
> arm: Support new Xilinx Zynq platform
> xilinx: Add new Zynq board
>
> Nobuhiro Iwamatsu (23):
> ARMv7: Add register definition of global timer
> arm: rmobile: Add basic support for Renesas R-Mobile
> arm: rmobile: Add support Renesas SH73A0
> arm: rmobile: Add support PFC of Renesas SH73A0
> arm: rmobile: Add supoprt for KMC KZM-A9-GT board
> arm: rmobile: Support build with gcc-4.6 or later
> arm: rmobile: kzm9g: Add LIBFDT support
> arm: rmobile: kzm9g: remove unrelated config
> arm: rmobile: Change initializing ICCICR register
> arm: rmobile: Add support TMU base timer function
> arm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board config file
> arm: rmobile: Add support Renesas R8A7740
> arm: rmobile: Add support PFC of Renesas R8A7740
> arm: rmobile: armadillo-800eva Remove board_eth_init
> arm: rmobile: Add cpu_eth_init function
> rmobile: armadillo-800eva: Change init function of SCIFA1
> rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDT
> rmobile: armadillo-800eva: Add Support NFS and BOOTZ command
> rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE
> rmobile: Add README
> doc/git-mailrc: Add 'rmobile' alias
> i2c: sh: Remove irq_wait function
> rmobile: Fix build timer driver with BUILD_DIR
>
> Otavio Salvador (1):
> mx28evk: Add missing 'setexpr' command
>
> Peter Meerwald (1):
> omap4_panda: remove CONFIG_PANDA, not used
>
> Ramesh Chandrasekaran (1):
> snowball: Clear UART RX FIFO
>
> Rob Herring (1):
> ARM: increase lmb stack space reservation to 4KB
>
> Simon Baatz (1):
> kirkwood: ib62x0: Invert SATA activity LEDs
>
> Simon Guinot (3):
> lacie_kw: add support for EFI partitions
> ARM: add support for Network Space v2 Lite and Mini
> ARM: add support for d2 Network v2
>
> Stefan Roese (1):
> ARM: Add X600 board support (SPEAr600 based)
>
> Tetsuyuki Kobayashi (11):
> arm: rmobile: kzm9g: Modify sdram area
> arm: rmobile: kzm9g: Adjust low level hardware setting
> arm: rmobile: kzm9g: change prompt to board specific
> arm: rmobile: kzm9g: Modify bus controller setting for CS4
> arm: rmobile: kzm9g: enable reset command
> arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
> arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting
> arm: rmobile: kzm9g: add NFS_TIMEOUT in config file
> arm: rmobile: kzm9g: remove unrelated config
> arm: rmobile: kzm9g: fix CPU info
> arm: rmobile: kzm9g: separate cpu_rev to integer and fraction
>
> Valentin Longchamp (2):
> arm/km: add mv88e6352 configuration for kmnusa
> km_kirkwood: enable MV88E6352_SWITCH support for kmnusa
>
> Wu, Josh (2):
> at91sam9x5: set default EBI I/O drive configuration.
> atmel_nand: fix the U-Boot output information about nand flash
> with PMECC enable.
>
> Zhong Hongbo (1):
> arm: Fixed the offset for the no relocation.
>
> MAINTAINERS | 24 +
> arch/arm/config.mk | 18 +
> arch/arm/cpu/arm1136/start.S | 1 +
> arch/arm/cpu/arm1176/start.S | 1 +
> arch/arm/cpu/arm920t/start.S | 1 +
> arch/arm/cpu/arm925t/start.S | 1 +
> arch/arm/cpu/arm926ejs/kirkwood/dram.c | 58 +-
> arch/arm/cpu/arm926ejs/start.S | 1 +
> arch/arm/cpu/arm946es/start.S | 1 +
> arch/arm/cpu/arm_intcm/start.S | 1 +
> arch/arm/cpu/armv7/highbank/config.mk | 1 -
> arch/arm/cpu/armv7/omap-common/config.mk | 9 -
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/rmobile/Makefile | 65 +
> arch/arm/cpu/armv7/rmobile/board.c | 31 +
> arch/arm/cpu/armv7/rmobile/config.mk | 26 +
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c | 48 +
> arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c | 60 +
> arch/arm/cpu/armv7/rmobile/cpu_info.c | 85 +
> arch/arm/cpu/armv7/rmobile/emac.c | 36 +
> arch/arm/cpu/armv7/rmobile/lowlevel_init.S | 98 +
> arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c | 2612
> ++++++++++++++++++ arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c
> | 2807 ++++++++++++++++++++
> arch/arm/cpu/armv7/rmobile/timer.c | 97 +
> arch/arm/cpu/armv7/socfpga/Makefile | 51 +
> arch/arm/cpu/armv7/socfpga/config.mk | 16 +
> arch/arm/cpu/armv7/socfpga/lowlevel_init.S | 77 +
> arch/arm/cpu/armv7/socfpga/misc.c | 54 +
> arch/arm/cpu/armv7/socfpga/spl.c | 48 +
> arch/arm/cpu/armv7/socfpga/timer.c | 104 +
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 60 +
> arch/arm/cpu/armv7/start.S | 5 +-
> arch/arm/cpu/armv7/zynq/Makefile | 51 +
> arch/arm/cpu/armv7/zynq/cpu.c | 31 +
> arch/arm/cpu/armv7/zynq/timer.c | 150 ++
> arch/arm/cpu/ixp/start.S | 1 +
> arch/arm/cpu/lh7a40x/start.S | 1 +
> arch/arm/cpu/pxa/start.S | 1 +
> arch/arm/cpu/s3c44b0/start.S | 1 +
> arch/arm/cpu/sa1100/start.S | 1 +
> arch/arm/imx-common/cpu.c | 9 +
> arch/arm/include/asm/arch-am33xx/spl.h | 2 +
> arch/arm/include/asm/arch-armv7/globaltimer.h | 36 +
> arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +-
> arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 2 +
> arch/arm/include/asm/arch-orion5x/cpu.h | 1 -
> arch/arm/include/asm/arch-rmobile/gpio.h | 12 +
> arch/arm/include/asm/arch-rmobile/irqs.h | 18 +
> arch/arm/include/asm/arch-rmobile/r8a7740-gpio.h | 584 ++++
> arch/arm/include/asm/arch-rmobile/r8a7740.h | 287 ++
> arch/arm/include/asm/arch-rmobile/rmobile.h | 14 +
> arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h | 553 ++++
> arch/arm/include/asm/arch-rmobile/sh73a0.h | 289 ++
> arch/arm/include/asm/arch-rmobile/sys_proto.h | 29 +
> arch/arm/include/asm/arch-s3c24x0/gpio.h | 171 ++
> arch/arm/include/asm/arch-s3c24x0/iomux.h | 200 ++
> arch/arm/include/asm/arch-socfpga/reset_manager.h | 37
> + .../include/asm/arch-socfpga/socfpga_base_addrs.h | 27 +
> arch/arm/include/asm/arch-socfpga/spl.h | 26 +
> arch/arm/include/asm/arch-socfpga/timer.h | 29 +
> arch/arm/include/asm/mach-types.h | 26 +
> arch/arm/lib/bootm.c | 7 +-
> board/LaCie/common/common.c | 36 +-
> board/LaCie/common/common.h | 1 +
> board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 ++
> board/LaCie/netspace_v2/netspace_v2.c | 4 +
> board/altera/socfpga_cyclone5/Makefile | 50 +
> board/altera/socfpga_cyclone5/socfpga_cyclone5.c | 80 +
> board/atmark-techno/armadillo-800eva/Makefile | 46
> + .../armadillo-800eva/armadillo-800eva.c | 328 +++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 +
> board/buffalo/lsxl/lsxl.c | 6 +-
> board/davinci/ea20/ea20.c | 32 +-
> board/freescale/mx28evk/mx28evk.c | 25 -
> board/freescale/mx51evk/mx51evk.c | 8 +
> board/friendlyarm/mini2440/Makefile | 44 +
> board/friendlyarm/mini2440/mini2440.c | 134 +
> board/friendlyarm/mini2440/mini2440.h | 144 +
> board/iomega/iconnect/Makefile | 43 +
> board/iomega/iconnect/iconnect.c | 107 +
> board/iomega/iconnect/iconnect.h | 39 +
> board/iomega/iconnect/kwbimage.cfg | 165 ++
> board/karo/tx25/lowlevel_init.S | 8 +
> board/keymile/km_arm/km_arm.c | 68 +-
> board/kmc/kzm9g/Makefile | 50 +
> board/kmc/kzm9g/kzm9g.c | 377 +++
> board/raidsonic/ib62x0/ib62x0.c | 3 +
> board/raidsonic/ib62x0/ib62x0.h | 4 +
> board/spear/x600/Makefile | 47 +
> board/spear/x600/fpga.c | 280 ++
> board/spear/x600/fpga.h | 23 +
> board/spear/x600/x600.c | 124 +
> board/st-ericsson/snowball/snowball.c | 4 +
> board/ti/beagle/beagle.c | 2 +-
> board/xilinx/zynq/Makefile | 54 +
> board/xilinx/zynq/board.c | 54 +
> boards.cfg | 10 +
> common/Makefile | 4 +
> common/cmd_nvedit.c | 8 +
> common/env_common.c | 7 +-
> common/serial.c | 8 +
> common/spl/Makefile | 1 +
> common/spl/spl.c | 11 +
> common/spl/spl_net.c | 52 +
> config.mk | 1 +
> doc/README.mini2440 | 28 +
> doc/README.rmobile | 65 +
> doc/git-mailrc | 1 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/s3c2440_gpio.c | 95 +
> drivers/i2c/sh_i2c.c | 16 -
> drivers/mtd/nand/atmel_nand.c | 5 +-
> drivers/mtd/spi/atmel.c | 17 +-
> drivers/net/davinci_emac.c | 3 +-
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_zynq.c | 247 ++
> drivers/video/cfb_console.c | 140 +-
> drivers/video/mxc_ipuv3_fb.c | 20 +
> include/bootstage.h | 6 +-
> include/config_uncmd_spl.h | 44 +
> include/configs/am335x_evm.h | 9 +-
> include/configs/armadillo-800eva.h | 160 ++
> include/configs/at91sam9261ek.h | 2 +
> include/configs/at91sam9m10g45ek.h | 2 +
> include/configs/at91sam9x5ek.h | 2 +
> include/configs/devkit8000.h | 1 +
> include/configs/ea20.h | 108 +-
> include/configs/edminiv2.h | 2 +-
> include/configs/iconnect.h | 129 +
> include/configs/km_kirkwood.h | 2 +
> include/configs/kzm9g.h | 169 ++
> include/configs/lacie_kw.h | 44 +-
> include/configs/mini2440.h | 186 ++
> include/configs/mx28evk.h | 1 +
> include/configs/mx51evk.h | 1 +
> include/configs/omap4_panda.h | 1 -
> include/configs/socfpga_cyclone5.h | 236 ++
> include/configs/x600.h | 339 +++
> include/configs/zynq.h | 112 +
> include/ipu_pixfmt.h | 1 +
> include/serial.h | 5 +
> include/sh_tmu.h | 2 +-
> include/spl.h | 3 +
> lib/Makefile | 9 +-
> lib/hashtable.c | 2 +
> mkconfig | 1 +
> net/bootp.c | 27 +-
> spl/Makefile | 3 +
> tools/binutils-version.sh | 20 + 150 files
> changed, 13849 insertions(+), 179 deletions(-) delete mode 100644
> arch/arm/cpu/armv7/highbank/config.mk create mode 100644
> arch/arm/cpu/armv7/rmobile/Makefile create mode 100644
> arch/arm/cpu/armv7/rmobile/board.c create mode 100644
> arch/arm/cpu/armv7/rmobile/config.mk create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info.c create mode 100644
> arch/arm/cpu/armv7/rmobile/emac.c create mode 100644
> arch/arm/cpu/armv7/rmobile/lowlevel_init.S create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c create mode 100644
> arch/arm/cpu/armv7/rmobile/timer.c create mode 100644
> arch/arm/cpu/armv7/socfpga/Makefile create mode 100644
> arch/arm/cpu/armv7/socfpga/config.mk create mode 100644
> arch/arm/cpu/armv7/socfpga/lowlevel_init.S create mode 100644
> arch/arm/cpu/armv7/socfpga/misc.c create mode 100644
> arch/arm/cpu/armv7/socfpga/spl.c create mode 100644
> arch/arm/cpu/armv7/socfpga/timer.c create mode 100644
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds create mode 100644
> arch/arm/cpu/armv7/zynq/Makefile create mode 100644
> arch/arm/cpu/armv7/zynq/cpu.c create mode 100644
> arch/arm/cpu/armv7/zynq/timer.c create mode 100644
> arch/arm/include/asm/arch-armv7/globaltimer.h create mode 100644
> arch/arm/include/asm/arch-rmobile/gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/irqs.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7740-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7740.h create mode 100644
> arch/arm/include/asm/arch-rmobile/rmobile.h create mode 100644
> arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/sh73a0.h create mode 100644
> arch/arm/include/asm/arch-rmobile/sys_proto.h create mode 100644
> arch/arm/include/asm/arch-s3c24x0/gpio.h create mode 100644
> arch/arm/include/asm/arch-s3c24x0/iomux.h create mode 100644
> arch/arm/include/asm/arch-socfpga/reset_manager.h create mode 100644
> arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h create mode
> 100644 arch/arm/include/asm/arch-socfpga/spl.h create mode 100644
> arch/arm/include/asm/arch-socfpga/timer.h create mode 100644
> board/LaCie/netspace_v2/kwbimage-ns2l.cfg create mode 100644
> board/altera/socfpga_cyclone5/Makefile create mode 100644
> board/altera/socfpga_cyclone5/socfpga_cyclone5.c create mode 100644
> board/atmark-techno/armadillo-800eva/Makefile create mode 100644
> board/atmark-techno/armadillo-800eva/armadillo-800eva.c create mode
> 100644 board/friendlyarm/mini2440/Makefile create mode 100644
> board/friendlyarm/mini2440/mini2440.c create mode 100644
> board/friendlyarm/mini2440/mini2440.h create mode 100644
> board/iomega/iconnect/Makefile create mode 100644
> board/iomega/iconnect/iconnect.c create mode 100644
> board/iomega/iconnect/iconnect.h create mode 100644
> board/iomega/iconnect/kwbimage.cfg create mode 100644
> board/kmc/kzm9g/Makefile create mode 100644 board/kmc/kzm9g/kzm9g.c
> create mode 100644 board/spear/x600/Makefile
> create mode 100644 board/spear/x600/fpga.c
> create mode 100644 board/spear/x600/fpga.h
> create mode 100644 board/spear/x600/x600.c
> create mode 100644 board/xilinx/zynq/Makefile
> create mode 100644 board/xilinx/zynq/board.c
> create mode 100644 common/spl/spl_net.c
> create mode 100644 doc/README.mini2440
> create mode 100644 doc/README.rmobile
> create mode 100644 drivers/gpio/s3c2440_gpio.c
> create mode 100644 drivers/serial/serial_zynq.c
> create mode 100644 include/config_uncmd_spl.h
> create mode 100644 include/configs/armadillo-800eva.h
> create mode 100644 include/configs/iconnect.h
> create mode 100644 include/configs/kzm9g.h
> create mode 100644 include/configs/mini2440.h
> create mode 100644 include/configs/socfpga_cyclone5.h
> create mode 100644 include/configs/x600.h
> create mode 100644 include/configs/zynq.h
> create mode 100755 tools/binutils-version.sh
Applied to u-boot/master, thanks! Note that I don't yet see a
work-around for the gcc 4.7 issue, and I really want to see that for
-rc3.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121004/a8293632/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-10-04 16:57 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit
4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
sandbox: Add asm/errno.h (2012-09-29 10:00:29 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 777544085d2b417a36df50eb564bf037a044e60e:
ARM: Add Altera SOCFPGA Cyclone5 (2012-10-04 18:11:52 +0200)
----------------------------------------------------------------
Albert ARIBAUD (5):
Merge remote-tracking branch 'u-boot-atmel/master'
Merge remote-tracking branch 'u-boot-imx/master'
Merge remote-tracking branch 'u-boot/master'
edminiv2: increase malloc len to 256K
Merge remote-tracking branch 'u-boot-marvell/master'
Allen Martin (2):
tools, config.mk: add binutils-version
arm: work around assembler bug
Andreas Bie?mann (1):
devkit8000: add rootwait to mmcboot option
Bastian Ruppert (6):
davinci: ea20: reorganisation LCD startup
davinci: ea20: the console is always set to the serial line
video: cfb_console: logo can be positioned via the splashpos
variable video: cfb_console: add function to plot the logo area black
da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
davinci: ea20: add some configs and default environmet variables
Beno?t Th?baudeau (3):
mx51evk: Add CONFIG_REVISION_TAG
KARO TX25: Fix NAND Flash R/W cycle times
armv7 cpu_init_crit: Simplify code
Bo Shen (3):
spi: add atmel at25df321 serial flash support
spiflash: at25: using common spi flash operation
Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
Dinh Nguyen (2):
ARM: kirkwood/orion5x: Use reset_cpu definition in
include/common.h ARM: Add Altera SOCFPGA Cyclone5
Eric Nelson (2):
i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
frame buffer i.MX: shut down video before launch of O/S
Fabio Estevam (1):
mx28evk: Remove fecmxc_mii_postcall()
Gabriel Huau (2):
ARM : Add GPIO Driver and IOMUX definition for S3C2440
ARM : Add support for MINI2440 (s3c2440).
Gerlando Falauto (2):
kirkwood: implement kw_sdram_bs_set()
kirkwood: implement kw_sdram_size_adjust
Hideyuki Sano (1):
arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board
Holger Brunck (2):
kirkwood: use c-struct for access to SDRAM addr decode registers
arm/km: use kw_sdram_size_adjust to adjust SDRAM size
Ilya Yanok (4):
net/bootp: add VCI support for BOOTP also
OMAP: spl: call timer_init() from SPL
am335x_evm: enable networking in SPL
OMAP: networking support for SPL
Joe Hershberger (1):
arm: Add CONFIG_OF_BOARD_SETUP support to bootm
Joel A Fernandes (1):
am33xx: Fix fetching of mmc1 bootmode from bootrom for AM33XX
Koen Kooi (1):
am335x-evm config: decrease bootdelay to 1s and mount rootfs RO
Luka Perkov (2):
kirkwood: fix mpp.h coding style
kirkwood: add support for Iomega iConnect board
Michael Walle (1):
lsxl: also turn off fan in power down mode
Michal Simek (4):
arm: Remove additional config flags
serial: Add Zynq serial driver
arm: Support new Xilinx Zynq platform
xilinx: Add new Zynq board
Nobuhiro Iwamatsu (23):
ARMv7: Add register definition of global timer
arm: rmobile: Add basic support for Renesas R-Mobile
arm: rmobile: Add support Renesas SH73A0
arm: rmobile: Add support PFC of Renesas SH73A0
arm: rmobile: Add supoprt for KMC KZM-A9-GT board
arm: rmobile: Support build with gcc-4.6 or later
arm: rmobile: kzm9g: Add LIBFDT support
arm: rmobile: kzm9g: remove unrelated config
arm: rmobile: Change initializing ICCICR register
arm: rmobile: Add support TMU base timer function
arm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board config file
arm: rmobile: Add support Renesas R8A7740
arm: rmobile: Add support PFC of Renesas R8A7740
arm: rmobile: armadillo-800eva Remove board_eth_init
arm: rmobile: Add cpu_eth_init function
rmobile: armadillo-800eva: Change init function of SCIFA1
rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDT
rmobile: armadillo-800eva: Add Support NFS and BOOTZ command
rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE
rmobile: Add README
doc/git-mailrc: Add 'rmobile' alias
i2c: sh: Remove irq_wait function
rmobile: Fix build timer driver with BUILD_DIR
Otavio Salvador (1):
mx28evk: Add missing 'setexpr' command
Peter Meerwald (1):
omap4_panda: remove CONFIG_PANDA, not used
Ramesh Chandrasekaran (1):
snowball: Clear UART RX FIFO
Rob Herring (1):
ARM: increase lmb stack space reservation to 4KB
Simon Baatz (1):
kirkwood: ib62x0: Invert SATA activity LEDs
Simon Guinot (3):
lacie_kw: add support for EFI partitions
ARM: add support for Network Space v2 Lite and Mini
ARM: add support for d2 Network v2
Stefan Roese (1):
ARM: Add X600 board support (SPEAr600 based)
Tetsuyuki Kobayashi (11):
arm: rmobile: kzm9g: Modify sdram area
arm: rmobile: kzm9g: Adjust low level hardware setting
arm: rmobile: kzm9g: change prompt to board specific
arm: rmobile: kzm9g: Modify bus controller setting for CS4
arm: rmobile: kzm9g: enable reset command
arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting
arm: rmobile: kzm9g: add NFS_TIMEOUT in config file
arm: rmobile: kzm9g: remove unrelated config
arm: rmobile: kzm9g: fix CPU info
arm: rmobile: kzm9g: separate cpu_rev to integer and fraction
Valentin Longchamp (2):
arm/km: add mv88e6352 configuration for kmnusa
km_kirkwood: enable MV88E6352_SWITCH support for kmnusa
Wu, Josh (2):
at91sam9x5: set default EBI I/O drive configuration.
atmel_nand: fix the U-Boot output information about nand flash
with PMECC enable.
Zhong Hongbo (1):
arm: Fixed the offset for the no relocation.
MAINTAINERS | 24 +
arch/arm/config.mk | 18 +
arch/arm/cpu/arm1136/start.S | 1 +
arch/arm/cpu/arm1176/start.S | 1 +
arch/arm/cpu/arm920t/start.S | 1 +
arch/arm/cpu/arm925t/start.S | 1 +
arch/arm/cpu/arm926ejs/kirkwood/dram.c | 58 +-
arch/arm/cpu/arm926ejs/start.S | 1 +
arch/arm/cpu/arm946es/start.S | 1 +
arch/arm/cpu/arm_intcm/start.S | 1 +
arch/arm/cpu/armv7/highbank/config.mk | 1 -
arch/arm/cpu/armv7/omap-common/config.mk | 9 -
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/rmobile/Makefile | 65 +
arch/arm/cpu/armv7/rmobile/board.c | 31 +
arch/arm/cpu/armv7/rmobile/config.mk | 26 +
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c | 48 +
arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c | 60 +
arch/arm/cpu/armv7/rmobile/cpu_info.c | 85 +
arch/arm/cpu/armv7/rmobile/emac.c | 36 +
arch/arm/cpu/armv7/rmobile/lowlevel_init.S | 98 +
arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c | 2612
++++++++++++++++++ arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c
| 2807 ++++++++++++++++++++
arch/arm/cpu/armv7/rmobile/timer.c | 97 +
arch/arm/cpu/armv7/socfpga/Makefile | 51 +
arch/arm/cpu/armv7/socfpga/config.mk | 16 +
arch/arm/cpu/armv7/socfpga/lowlevel_init.S | 77 +
arch/arm/cpu/armv7/socfpga/misc.c | 54 +
arch/arm/cpu/armv7/socfpga/spl.c | 48 +
arch/arm/cpu/armv7/socfpga/timer.c | 104 +
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 60 +
arch/arm/cpu/armv7/start.S | 5 +-
arch/arm/cpu/armv7/zynq/Makefile | 51 +
arch/arm/cpu/armv7/zynq/cpu.c | 31 +
arch/arm/cpu/armv7/zynq/timer.c | 150 ++
arch/arm/cpu/ixp/start.S | 1 +
arch/arm/cpu/lh7a40x/start.S | 1 +
arch/arm/cpu/pxa/start.S | 1 +
arch/arm/cpu/s3c44b0/start.S | 1 +
arch/arm/cpu/sa1100/start.S | 1 +
arch/arm/imx-common/cpu.c | 9 +
arch/arm/include/asm/arch-am33xx/spl.h | 2 +
arch/arm/include/asm/arch-armv7/globaltimer.h | 36 +
arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +-
arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 2 +
arch/arm/include/asm/arch-orion5x/cpu.h | 1 -
arch/arm/include/asm/arch-rmobile/gpio.h | 12 +
arch/arm/include/asm/arch-rmobile/irqs.h | 18 +
arch/arm/include/asm/arch-rmobile/r8a7740-gpio.h | 584 ++++
arch/arm/include/asm/arch-rmobile/r8a7740.h | 287 ++
arch/arm/include/asm/arch-rmobile/rmobile.h | 14 +
arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h | 553 ++++
arch/arm/include/asm/arch-rmobile/sh73a0.h | 289 ++
arch/arm/include/asm/arch-rmobile/sys_proto.h | 29 +
arch/arm/include/asm/arch-s3c24x0/gpio.h | 171 ++
arch/arm/include/asm/arch-s3c24x0/iomux.h | 200 ++
arch/arm/include/asm/arch-socfpga/reset_manager.h | 37
+ .../include/asm/arch-socfpga/socfpga_base_addrs.h | 27 +
arch/arm/include/asm/arch-socfpga/spl.h | 26 +
arch/arm/include/asm/arch-socfpga/timer.h | 29 +
arch/arm/include/asm/mach-types.h | 26 +
arch/arm/lib/bootm.c | 7 +-
board/LaCie/common/common.c | 36 +-
board/LaCie/common/common.h | 1 +
board/LaCie/netspace_v2/kwbimage-ns2l.cfg | 162 ++
board/LaCie/netspace_v2/netspace_v2.c | 4 +
board/altera/socfpga_cyclone5/Makefile | 50 +
board/altera/socfpga_cyclone5/socfpga_cyclone5.c | 80 +
board/atmark-techno/armadillo-800eva/Makefile | 46
+ .../armadillo-800eva/armadillo-800eva.c | 328 +++
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 +
board/buffalo/lsxl/lsxl.c | 6 +-
board/davinci/ea20/ea20.c | 32 +-
board/freescale/mx28evk/mx28evk.c | 25 -
board/freescale/mx51evk/mx51evk.c | 8 +
board/friendlyarm/mini2440/Makefile | 44 +
board/friendlyarm/mini2440/mini2440.c | 134 +
board/friendlyarm/mini2440/mini2440.h | 144 +
board/iomega/iconnect/Makefile | 43 +
board/iomega/iconnect/iconnect.c | 107 +
board/iomega/iconnect/iconnect.h | 39 +
board/iomega/iconnect/kwbimage.cfg | 165 ++
board/karo/tx25/lowlevel_init.S | 8 +
board/keymile/km_arm/km_arm.c | 68 +-
board/kmc/kzm9g/Makefile | 50 +
board/kmc/kzm9g/kzm9g.c | 377 +++
board/raidsonic/ib62x0/ib62x0.c | 3 +
board/raidsonic/ib62x0/ib62x0.h | 4 +
board/spear/x600/Makefile | 47 +
board/spear/x600/fpga.c | 280 ++
board/spear/x600/fpga.h | 23 +
board/spear/x600/x600.c | 124 +
board/st-ericsson/snowball/snowball.c | 4 +
board/ti/beagle/beagle.c | 2 +-
board/xilinx/zynq/Makefile | 54 +
board/xilinx/zynq/board.c | 54 +
boards.cfg | 10 +
common/Makefile | 4 +
common/cmd_nvedit.c | 8 +
common/env_common.c | 7 +-
common/serial.c | 8 +
common/spl/Makefile | 1 +
common/spl/spl.c | 11 +
common/spl/spl_net.c | 52 +
config.mk | 1 +
doc/README.mini2440 | 28 +
doc/README.rmobile | 65 +
doc/git-mailrc | 1 +
drivers/gpio/Makefile | 1 +
drivers/gpio/s3c2440_gpio.c | 95 +
drivers/i2c/sh_i2c.c | 16 -
drivers/mtd/nand/atmel_nand.c | 5 +-
drivers/mtd/spi/atmel.c | 17 +-
drivers/net/davinci_emac.c | 3 +-
drivers/serial/Makefile | 1 +
drivers/serial/serial_zynq.c | 247 ++
drivers/video/cfb_console.c | 140 +-
drivers/video/mxc_ipuv3_fb.c | 20 +
include/bootstage.h | 6 +-
include/config_uncmd_spl.h | 44 +
include/configs/am335x_evm.h | 9 +-
include/configs/armadillo-800eva.h | 160 ++
include/configs/at91sam9261ek.h | 2 +
include/configs/at91sam9m10g45ek.h | 2 +
include/configs/at91sam9x5ek.h | 2 +
include/configs/devkit8000.h | 1 +
include/configs/ea20.h | 108 +-
include/configs/edminiv2.h | 2 +-
include/configs/iconnect.h | 129 +
include/configs/km_kirkwood.h | 2 +
include/configs/kzm9g.h | 169 ++
include/configs/lacie_kw.h | 44 +-
include/configs/mini2440.h | 186 ++
include/configs/mx28evk.h | 1 +
include/configs/mx51evk.h | 1 +
include/configs/omap4_panda.h | 1 -
include/configs/socfpga_cyclone5.h | 236 ++
include/configs/x600.h | 339 +++
include/configs/zynq.h | 112 +
include/ipu_pixfmt.h | 1 +
include/serial.h | 5 +
include/sh_tmu.h | 2 +-
include/spl.h | 3 +
lib/Makefile | 9 +-
lib/hashtable.c | 2 +
mkconfig | 1 +
net/bootp.c | 27 +-
spl/Makefile | 3 +
tools/binutils-version.sh | 20 + 150 files
changed, 13849 insertions(+), 179 deletions(-) delete mode 100644
arch/arm/cpu/armv7/highbank/config.mk create mode 100644
arch/arm/cpu/armv7/rmobile/Makefile create mode 100644
arch/arm/cpu/armv7/rmobile/board.c create mode 100644
arch/arm/cpu/armv7/rmobile/config.mk create mode 100644
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c create mode 100644
arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c create mode 100644
arch/arm/cpu/armv7/rmobile/cpu_info.c create mode 100644
arch/arm/cpu/armv7/rmobile/emac.c create mode 100644
arch/arm/cpu/armv7/rmobile/lowlevel_init.S create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c create mode 100644
arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c create mode 100644
arch/arm/cpu/armv7/rmobile/timer.c create mode 100644
arch/arm/cpu/armv7/socfpga/Makefile create mode 100644
arch/arm/cpu/armv7/socfpga/config.mk create mode 100644
arch/arm/cpu/armv7/socfpga/lowlevel_init.S create mode 100644
arch/arm/cpu/armv7/socfpga/misc.c create mode 100644
arch/arm/cpu/armv7/socfpga/spl.c create mode 100644
arch/arm/cpu/armv7/socfpga/timer.c create mode 100644
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds create mode 100644
arch/arm/cpu/armv7/zynq/Makefile create mode 100644
arch/arm/cpu/armv7/zynq/cpu.c create mode 100644
arch/arm/cpu/armv7/zynq/timer.c create mode 100644
arch/arm/include/asm/arch-armv7/globaltimer.h create mode 100644
arch/arm/include/asm/arch-rmobile/gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/irqs.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7740-gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/r8a7740.h create mode 100644
arch/arm/include/asm/arch-rmobile/rmobile.h create mode 100644
arch/arm/include/asm/arch-rmobile/sh73a0-gpio.h create mode 100644
arch/arm/include/asm/arch-rmobile/sh73a0.h create mode 100644
arch/arm/include/asm/arch-rmobile/sys_proto.h create mode 100644
arch/arm/include/asm/arch-s3c24x0/gpio.h create mode 100644
arch/arm/include/asm/arch-s3c24x0/iomux.h create mode 100644
arch/arm/include/asm/arch-socfpga/reset_manager.h create mode 100644
arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h create mode
100644 arch/arm/include/asm/arch-socfpga/spl.h create mode 100644
arch/arm/include/asm/arch-socfpga/timer.h create mode 100644
board/LaCie/netspace_v2/kwbimage-ns2l.cfg create mode 100644
board/altera/socfpga_cyclone5/Makefile create mode 100644
board/altera/socfpga_cyclone5/socfpga_cyclone5.c create mode 100644
board/atmark-techno/armadillo-800eva/Makefile create mode 100644
board/atmark-techno/armadillo-800eva/armadillo-800eva.c create mode
100644 board/friendlyarm/mini2440/Makefile create mode 100644
board/friendlyarm/mini2440/mini2440.c create mode 100644
board/friendlyarm/mini2440/mini2440.h create mode 100644
board/iomega/iconnect/Makefile create mode 100644
board/iomega/iconnect/iconnect.c create mode 100644
board/iomega/iconnect/iconnect.h create mode 100644
board/iomega/iconnect/kwbimage.cfg create mode 100644
board/kmc/kzm9g/Makefile create mode 100644 board/kmc/kzm9g/kzm9g.c
create mode 100644 board/spear/x600/Makefile
create mode 100644 board/spear/x600/fpga.c
create mode 100644 board/spear/x600/fpga.h
create mode 100644 board/spear/x600/x600.c
create mode 100644 board/xilinx/zynq/Makefile
create mode 100644 board/xilinx/zynq/board.c
create mode 100644 common/spl/spl_net.c
create mode 100644 doc/README.mini2440
create mode 100644 doc/README.rmobile
create mode 100644 drivers/gpio/s3c2440_gpio.c
create mode 100644 drivers/serial/serial_zynq.c
create mode 100644 include/config_uncmd_spl.h
create mode 100644 include/configs/armadillo-800eva.h
create mode 100644 include/configs/iconnect.h
create mode 100644 include/configs/kzm9g.h
create mode 100644 include/configs/mini2440.h
create mode 100644 include/configs/socfpga_cyclone5.h
create mode 100644 include/configs/x600.h
create mode 100644 include/configs/zynq.h
create mode 100755 tools/binutils-version.sh
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-09-21 21:35 Albert ARIBAUD
@ 2012-09-22 0:21 ` Tom Rini
0 siblings, 0 replies; 261+ messages in thread
From: Tom Rini @ 2012-09-22 0:21 UTC (permalink / raw)
To: u-boot
On Fri, Sep 21, 2012 at 11:35:17PM +0200, Albert ARIBAUD wrote:
> Hello Wolfgang,
>
> The following changes since commit
> 6e2fbdea1b26d75314d87c380a36b0015bf824cf:
>
> Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
> (2012-09-02 00:44:09 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8:
>
> Merge remote-tracking branch 'u-boot-imx/master' (2012-09-21 00:26:19
> +0200)
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (4):
> edminiv2: orion5x: fix GPIO inits and values
> Merge remote-tracking branch 'u-boot-atmel/master' into m
> Merge remote-tracking branch 'u-boot-ti/master' into m
> Merge remote-tracking branch 'u-boot-imx/master'
>
> Arnout Vandecappelle (Essensium/Mind) (1):
> OMAP3: add definition of CTRL_WKUP_CTRL register
>
> Ashok Kumar Reddy (2):
> ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
> mx6qsabrelite:Use IMX_GPIO_NR Macro
>
> Beno??t Th??baudeau (8):
> mx35: Fix decode_pll
> mx35: Add definitions for clock gate values
> mx35: Fix clock dividers
> mx25: Define default SoC input clock frequencies
> mx35: Define default SoC input clock frequencies
> mx35 timer: Switch to 32-kHz source
> Fix mx31_decode_pll
> mx31: Define default SoC input clock frequencies
>
> Fabio Estevam (3):
> mx28evk: Convert to mxs_adjust_memory_params()
> mx28evk: Add USB Ethernet support
> mx35pdk: README: Remove NAND references
>
> Holger Brunck (1):
> arm/km: remove unused code
>
> Jens Scharsig (2):
> eb_cpux9k2: fix chip select
> atmel: eb_cpux9k2: add ram target configuration
>
> Jim Lin (1):
> tegra: nand: Add Tegra NAND driver
>
> Karl O. Pinc (2):
> Cosmetic doc typo fixes to the kwbimage feature docs
> cosmetic: Better explain how to use the kirkwood kwbimage.cfg
> file.
>
> Linus Walleij (1):
> integrator: break out common config
>
> Lucas Stach (1):
> tegra20: usb: rework set_host_mode
>
> Marek Vasut (7):
> M28: Fix the use of gpmi-nand in mtdparts
> MX28: Cleanup mxsboot within make mrproper
> MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
> SCSPS1: Enable caches
> MX28: SPI: Fix the DMA DCache race condition
> MX28: SPI: Fix the DMA chaining
> MX28: MMC: Avoid DMA DCache race condition
>
> Markus Hubig (2):
> arm: Adds board_postclk_init to the init_sequence.
> Fixes the crippled console output on PortuxG20.
>
> Matt Sealey (1):
> efikamx: refine USB support
>
> Michael Walle (1):
> lsxl: support power switch
>
> Otavio Salvador (3):
> MX28: mx28evk: Align SSP clock speed
> MX28: mx28evk: Enable SPI DMA
> mx28evk: extend default environment
>
> Simon Glass (5):
> nand: Try to align the default buffers
> tegra: Add NAND support to funcmux
> tegra: fdt: Add NAND controller binding and definitions
> tegra: fdt: Add NAND definitions to fdt
> tegra: Enable NAND on Seaboard
>
> Stefano Babic (12):
> OMAP3: tam3517: add function to read MAC from EEPROM
> OMAP3: twister : get MAC address from EEPROM
> OMAP3: mt_ventoux: Correct board pinmux
> OMAP3: mt_ventoux: activate GPIO4
> OMAP3: mt_ventoux: read MAC address from EEPROM
> OMAP3: mt_ventoux: disable the buzzer at start-up
> video: drop duplicate set of DISPC_CONFIG register
> OMAP3: video: add macros to set display parameters
> OMAP3: mt_ventoux: added video support
> MX: set a common place to share code for Freescale i.MX
> MX35: mx35pdk: add support for MMC
> MX6: drop binary constants from iomux header
>
> Stephen Warren (6):
> tegra: enable NAND on Harmony
> mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
> env_mmc: allow environment to be in an eMMC partition
> tegra: put eMMC environment into the boot sectors
> ARM: tegra: remove redundant mkdirs from board Makefiles
> ARM: tegra: fix Ventana standalone build
>
> Thierry Reding (2):
> cmd_nand: dump: Align data and OOB buffers
> tegra: Enable NAND on TEC
>
> Tom Rini (1):
> am33xx: Remove redundant timer config
>
> Tom Warren (2):
> Tegra: Change Tegra20 to Tegra in common code, prep for T30
> NAND: MXS: include common.h first so cache.h is included in
> correct order
>
> Valentin Longchamp (4):
> km/arm: set SPI NOR Flash default parameters
> kw_spi: fix clock prescaler computation
> km/ivm: fix string len check to support 7 char board names
> arm/km: fix frequency of the SPI NOR Flash
>
> Makefile | 8 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 16 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 90 +-
> arch/arm/cpu/arm1136/mx35/timer.c | 46 +-
> arch/arm/cpu/arm720t/tegra20/cpu.c | 8 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
> arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +
> arch/arm/cpu/armv7/am33xx/board.c | 20 -
> arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c | 2 +-
> arch/arm/cpu/armv7/tegra20/usb.c | 37 +-
> arch/arm/cpu/tegra20-common/Makefile | 2 +-
> arch/arm/cpu/tegra20-common/ap20.c | 6 +-
> arch/arm/cpu/tegra20-common/board.c | 14 +-
> arch/arm/cpu/tegra20-common/funcmux.c | 7 +
> arch/arm/cpu/tegra20-common/warmboot.c | 14 +-
> arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +-
> arch/arm/dts/tegra20.dtsi | 7 +
> arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
> arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
> .../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
> arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
> arch/arm/include/asm/arch-kirkwood/spi.h | 1 +
> arch/arm/include/asm/arch-mx25/clock.h | 14 +
> arch/arm/include/asm/arch-mx31/clock.h | 14 +
> arch/arm/include/asm/arch-mx35/clock.h | 14 +
> arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +-
> arch/arm/include/asm/arch-mx6/iomux.h | 124 +--
> arch/arm/include/asm/arch-omap3/dss.h | 11 +-
> arch/arm/include/asm/arch-omap3/mux.h | 5 +
> arch/arm/include/asm/arch-tegra20/ap20.h | 3 -
> arch/arm/include/asm/arch-tegra20/funcmux.h | 3 +
> arch/arm/include/asm/arch-tegra20/mmc.h | 8 +-
> arch/arm/include/asm/arch-tegra20/sys_proto.h | 4 +-
> arch/arm/include/asm/arch-tegra20/tegra20.h | 13 +-
> .../arm/include/asm/arch-tegra20}/tegra_mmc.h | 12 +-
> arch/arm/include/asm/arch-tegra20/tegra_spi.h | 2 +-
> arch/arm/include/asm/arch-tegra20/timer.h | 4 +-
> arch/arm/lib/board.c | 3 +
> board/BuS/eb_cpux9k2/cpux9k2.c | 6 +-
> board/Marvell/sheevaplug/kwbimage.cfg | 4 +-
> board/avionic-design/common/tamonten.c | 2 +-
> board/avionic-design/dts/tegra20-tec.dts | 11 +
> board/buffalo/lsxl/lsxl.c | 22 +-
> board/compal/paz00/paz00.c | 4 +-
> board/compulab/trimslice/trimslice.c | 4 +-
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx35pdk/README | 78 +-
> board/freescale/mx35pdk/mx35pdk.c | 25 +
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
> board/genesi/mx51_efikamx/Makefile | 6 +-
> board/genesi/mx51_efikamx/efikamx-usb.c | 12 +
> board/genesi/mx51_efikamx/efikamx.c | 3 -
> board/keymile/common/ivm.c | 2 +-
> board/keymile/km_arm/km_arm.c | 20 -
> board/nvidia/common/board.c | 8 +-
> board/nvidia/dts/tegra20-harmony.dts | 10 +
> board/nvidia/dts/tegra20-seaboard.dts | 10 +
> board/nvidia/harmony/Makefile | 4 -
> board/nvidia/harmony/harmony.c | 4 +-
> board/nvidia/seaboard/Makefile | 4 -
> board/nvidia/seaboard/seaboard.c | 4 +-
> board/nvidia/ventana/Makefile | 4 +-
> board/nvidia/whistler/Makefile | 4 -
> board/nvidia/whistler/whistler.c | 4 +-
> board/taskit/stamp9g20/stamp9g20.c | 21 +-
> board/technexion/twister/twister.c | 10 +
> board/teejet/mt_ventoux/mt_ventoux.c | 113 +++
> board/teejet/mt_ventoux/mt_ventoux.h | 80 +-
> boards.cfg | 3 +-
> common/cmd_nand.c | 4 +-
> common/env_mmc.c | 64 +-
> doc/README.kwbimage | 19 +-
> .../nand/nvidia,tegra20-nand.txt | 53 +
> drivers/gpio/tegra_gpio.c | 8 +-
> drivers/i2c/tegra_i2c.c | 12 +-
> drivers/input/Makefile | 2 +-
> drivers/mmc/mmc.c | 3 +-
> drivers/mmc/mxsmmc.c | 4 +
> drivers/mmc/tegra_mmc.c | 34 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mxs_nand.c | 2 +-
> drivers/mtd/nand/nand_base.c | 3 +-
> drivers/mtd/nand/tegra_nand.c | 1026
> ++++++++++++++++++++
> drivers/mtd/nand/tegra_nand.h | 257 +++++
> drivers/spi/kirkwood_spi.c | 5 +-
> drivers/spi/mxs_spi.c | 58 +-
> drivers/spi/tegra_spi.c | 6 +-
> drivers/video/omap3_dss.c | 3 +-
> include/configs/eb_cpux9k2.h | 7 +-
> include/configs/edminiv2.h | 13 +-
> include/configs/flea3.h | 1 -
> include/configs/harmony.h | 19 +-
> include/configs/ima3-mx53.h | 3 +-
> include/configs/imx31_litekit.h | 1 -
> include/configs/imx31_phycore.h | 1 -
> include/configs/integrator-common.h | 103 ++
> include/configs/integratorap.h | 49 +-
> include/configs/integratorcp.h | 115 +--
> include/configs/km/keymile-common.h | 1 -
> include/configs/km/km_arm.h | 6 +-
> include/configs/m28evk.h | 4 +-
> include/configs/medcom.h | 6 +-
> include/configs/mt_ventoux.h | 17 +
> include/configs/mx25pdk.h | 1 -
> include/configs/mx28evk.h | 86 +-
> include/configs/mx31ads.h | 2 -
> include/configs/mx31pdk.h | 2 -
> include/configs/mx35pdk.h | 18 +-
> include/configs/paz00.h | 9 +-
> include/configs/plutux.h | 6 +-
> include/configs/qong.h | 2 -
> include/configs/sc_sps_1.h | 2 -
> include/configs/seaboard.h | 30 +-
> include/configs/stamp9g20.h | 1 +
> include/configs/tam3517-common.h | 66 ++
> include/configs/tec.h | 18
> +- .../{tegra20-common-post.h => tegra-common-post.h} | 12 +-
> include/configs/tegra20-common.h | 14 +-
> include/configs/trimslice.h | 8 +-
> include/configs/tt01.h | 2 -
> include/configs/ventana.h | 9 +-
> include/configs/whistler.h | 11 +-
> include/configs/zmx25.h | 1 -
> include/fdtdec.h | 1 +
> include/linux/mtd/nand.h | 7 +-
> include/mmc.h | 1 +
> lib/fdtdec.c | 1 + 134 files
> changed, 2522 insertions(+), 816 deletions(-) rename
> arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%) rename
> arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%) rename
> arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c} (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%) rename
> arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%) rename {drivers/mmc
> => arch/arm/include/asm/arch-tegra20}/tegra_mmc.h (96%) create mode
> 100644 doc/device-tree-bindings/nand/nvidia,tegra20-nand.txt create
> mode 100644 drivers/mtd/nand/tegra_nand.c create mode 100644
> drivers/mtd/nand/tegra_nand.h create mode 100644
> include/configs/integrator-common.h rename
> include/configs/{tegra20-common-post.h => tegra-common-post.h} (96%)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120921/7aa3a350/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-09-21 21:35 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit
6e2fbdea1b26d75314d87c380a36b0015bf824cf:
Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
(2012-09-02 00:44:09 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to d193c1b6eb05041c94ad9aacd8c94189d1dbc5f8:
Merge remote-tracking branch 'u-boot-imx/master' (2012-09-21 00:26:19
+0200)
----------------------------------------------------------------
Albert ARIBAUD (4):
edminiv2: orion5x: fix GPIO inits and values
Merge remote-tracking branch 'u-boot-atmel/master' into m
Merge remote-tracking branch 'u-boot-ti/master' into m
Merge remote-tracking branch 'u-boot-imx/master'
Arnout Vandecappelle (Essensium/Mind) (1):
OMAP3: add definition of CTRL_WKUP_CTRL register
Ashok Kumar Reddy (2):
ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
mx6qsabrelite:Use IMX_GPIO_NR Macro
Beno?t Th?baudeau (8):
mx35: Fix decode_pll
mx35: Add definitions for clock gate values
mx35: Fix clock dividers
mx25: Define default SoC input clock frequencies
mx35: Define default SoC input clock frequencies
mx35 timer: Switch to 32-kHz source
Fix mx31_decode_pll
mx31: Define default SoC input clock frequencies
Fabio Estevam (3):
mx28evk: Convert to mxs_adjust_memory_params()
mx28evk: Add USB Ethernet support
mx35pdk: README: Remove NAND references
Holger Brunck (1):
arm/km: remove unused code
Jens Scharsig (2):
eb_cpux9k2: fix chip select
atmel: eb_cpux9k2: add ram target configuration
Jim Lin (1):
tegra: nand: Add Tegra NAND driver
Karl O. Pinc (2):
Cosmetic doc typo fixes to the kwbimage feature docs
cosmetic: Better explain how to use the kirkwood kwbimage.cfg
file.
Linus Walleij (1):
integrator: break out common config
Lucas Stach (1):
tegra20: usb: rework set_host_mode
Marek Vasut (7):
M28: Fix the use of gpmi-nand in mtdparts
MX28: Cleanup mxsboot within make mrproper
MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
SCSPS1: Enable caches
MX28: SPI: Fix the DMA DCache race condition
MX28: SPI: Fix the DMA chaining
MX28: MMC: Avoid DMA DCache race condition
Markus Hubig (2):
arm: Adds board_postclk_init to the init_sequence.
Fixes the crippled console output on PortuxG20.
Matt Sealey (1):
efikamx: refine USB support
Michael Walle (1):
lsxl: support power switch
Otavio Salvador (3):
MX28: mx28evk: Align SSP clock speed
MX28: mx28evk: Enable SPI DMA
mx28evk: extend default environment
Simon Glass (5):
nand: Try to align the default buffers
tegra: Add NAND support to funcmux
tegra: fdt: Add NAND controller binding and definitions
tegra: fdt: Add NAND definitions to fdt
tegra: Enable NAND on Seaboard
Stefano Babic (12):
OMAP3: tam3517: add function to read MAC from EEPROM
OMAP3: twister : get MAC address from EEPROM
OMAP3: mt_ventoux: Correct board pinmux
OMAP3: mt_ventoux: activate GPIO4
OMAP3: mt_ventoux: read MAC address from EEPROM
OMAP3: mt_ventoux: disable the buzzer at start-up
video: drop duplicate set of DISPC_CONFIG register
OMAP3: video: add macros to set display parameters
OMAP3: mt_ventoux: added video support
MX: set a common place to share code for Freescale i.MX
MX35: mx35pdk: add support for MMC
MX6: drop binary constants from iomux header
Stephen Warren (6):
tegra: enable NAND on Harmony
mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
env_mmc: allow environment to be in an eMMC partition
tegra: put eMMC environment into the boot sectors
ARM: tegra: remove redundant mkdirs from board Makefiles
ARM: tegra: fix Ventana standalone build
Thierry Reding (2):
cmd_nand: dump: Align data and OOB buffers
tegra: Enable NAND on TEC
Tom Rini (1):
am33xx: Remove redundant timer config
Tom Warren (2):
Tegra: Change Tegra20 to Tegra in common code, prep for T30
NAND: MXS: include common.h first so cache.h is included in
correct order
Valentin Longchamp (4):
km/arm: set SPI NOR Flash default parameters
kw_spi: fix clock prescaler computation
km/ivm: fix string len check to support 7 char board names
arm/km: fix frequency of the SPI NOR Flash
Makefile | 8 +-
arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
arch/arm/cpu/arm1136/mx31/timer.c | 16 +-
arch/arm/cpu/arm1136/mx35/generic.c | 90 +-
arch/arm/cpu/arm1136/mx35/timer.c | 46 +-
arch/arm/cpu/arm720t/tegra20/cpu.c | 8 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +
arch/arm/cpu/armv7/am33xx/board.c | 20 -
arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c | 2 +-
arch/arm/cpu/armv7/tegra20/usb.c | 37 +-
arch/arm/cpu/tegra20-common/Makefile | 2 +-
arch/arm/cpu/tegra20-common/ap20.c | 6 +-
arch/arm/cpu/tegra20-common/board.c | 14 +-
arch/arm/cpu/tegra20-common/funcmux.c | 7 +
arch/arm/cpu/tegra20-common/warmboot.c | 14 +-
arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +-
arch/arm/dts/tegra20.dtsi | 7 +
arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
.../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
arch/arm/include/asm/arch-kirkwood/spi.h | 1 +
arch/arm/include/asm/arch-mx25/clock.h | 14 +
arch/arm/include/asm/arch-mx31/clock.h | 14 +
arch/arm/include/asm/arch-mx35/clock.h | 14 +
arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +-
arch/arm/include/asm/arch-mx6/iomux.h | 124 +--
arch/arm/include/asm/arch-omap3/dss.h | 11 +-
arch/arm/include/asm/arch-omap3/mux.h | 5 +
arch/arm/include/asm/arch-tegra20/ap20.h | 3 -
arch/arm/include/asm/arch-tegra20/funcmux.h | 3 +
arch/arm/include/asm/arch-tegra20/mmc.h | 8 +-
arch/arm/include/asm/arch-tegra20/sys_proto.h | 4 +-
arch/arm/include/asm/arch-tegra20/tegra20.h | 13 +-
.../arm/include/asm/arch-tegra20}/tegra_mmc.h | 12 +-
arch/arm/include/asm/arch-tegra20/tegra_spi.h | 2 +-
arch/arm/include/asm/arch-tegra20/timer.h | 4 +-
arch/arm/lib/board.c | 3 +
board/BuS/eb_cpux9k2/cpux9k2.c | 6 +-
board/Marvell/sheevaplug/kwbimage.cfg | 4 +-
board/avionic-design/common/tamonten.c | 2 +-
board/avionic-design/dts/tegra20-tec.dts | 11 +
board/buffalo/lsxl/lsxl.c | 22 +-
board/compal/paz00/paz00.c | 4 +-
board/compulab/trimslice/trimslice.c | 4 +-
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx35pdk/README | 78 +-
board/freescale/mx35pdk/mx35pdk.c | 25 +
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +-
board/genesi/mx51_efikamx/Makefile | 6 +-
board/genesi/mx51_efikamx/efikamx-usb.c | 12 +
board/genesi/mx51_efikamx/efikamx.c | 3 -
board/keymile/common/ivm.c | 2 +-
board/keymile/km_arm/km_arm.c | 20 -
board/nvidia/common/board.c | 8 +-
board/nvidia/dts/tegra20-harmony.dts | 10 +
board/nvidia/dts/tegra20-seaboard.dts | 10 +
board/nvidia/harmony/Makefile | 4 -
board/nvidia/harmony/harmony.c | 4 +-
board/nvidia/seaboard/Makefile | 4 -
board/nvidia/seaboard/seaboard.c | 4 +-
board/nvidia/ventana/Makefile | 4 +-
board/nvidia/whistler/Makefile | 4 -
board/nvidia/whistler/whistler.c | 4 +-
board/taskit/stamp9g20/stamp9g20.c | 21 +-
board/technexion/twister/twister.c | 10 +
board/teejet/mt_ventoux/mt_ventoux.c | 113 +++
board/teejet/mt_ventoux/mt_ventoux.h | 80 +-
boards.cfg | 3 +-
common/cmd_nand.c | 4 +-
common/env_mmc.c | 64 +-
doc/README.kwbimage | 19 +-
.../nand/nvidia,tegra20-nand.txt | 53 +
drivers/gpio/tegra_gpio.c | 8 +-
drivers/i2c/tegra_i2c.c | 12 +-
drivers/input/Makefile | 2 +-
drivers/mmc/mmc.c | 3 +-
drivers/mmc/mxsmmc.c | 4 +
drivers/mmc/tegra_mmc.c | 34 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 2 +-
drivers/mtd/nand/nand_base.c | 3 +-
drivers/mtd/nand/tegra_nand.c | 1026
++++++++++++++++++++
drivers/mtd/nand/tegra_nand.h | 257 +++++
drivers/spi/kirkwood_spi.c | 5 +-
drivers/spi/mxs_spi.c | 58 +-
drivers/spi/tegra_spi.c | 6 +-
drivers/video/omap3_dss.c | 3 +-
include/configs/eb_cpux9k2.h | 7 +-
include/configs/edminiv2.h | 13 +-
include/configs/flea3.h | 1 -
include/configs/harmony.h | 19 +-
include/configs/ima3-mx53.h | 3 +-
include/configs/imx31_litekit.h | 1 -
include/configs/imx31_phycore.h | 1 -
include/configs/integrator-common.h | 103 ++
include/configs/integratorap.h | 49 +-
include/configs/integratorcp.h | 115 +--
include/configs/km/keymile-common.h | 1 -
include/configs/km/km_arm.h | 6 +-
include/configs/m28evk.h | 4 +-
include/configs/medcom.h | 6 +-
include/configs/mt_ventoux.h | 17 +
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 86 +-
include/configs/mx31ads.h | 2 -
include/configs/mx31pdk.h | 2 -
include/configs/mx35pdk.h | 18 +-
include/configs/paz00.h | 9 +-
include/configs/plutux.h | 6 +-
include/configs/qong.h | 2 -
include/configs/sc_sps_1.h | 2 -
include/configs/seaboard.h | 30 +-
include/configs/stamp9g20.h | 1 +
include/configs/tam3517-common.h | 66 ++
include/configs/tec.h | 18
+- .../{tegra20-common-post.h => tegra-common-post.h} | 12 +-
include/configs/tegra20-common.h | 14 +-
include/configs/trimslice.h | 8 +-
include/configs/tt01.h | 2 -
include/configs/ventana.h | 9 +-
include/configs/whistler.h | 11 +-
include/configs/zmx25.h | 1 -
include/fdtdec.h | 1 +
include/linux/mtd/nand.h | 7 +-
include/mmc.h | 1 +
lib/fdtdec.c | 1 + 134 files
changed, 2522 insertions(+), 816 deletions(-) rename
arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%) rename
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%) rename
arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c} (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%) rename
arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%) rename {drivers/mmc
=> arch/arm/include/asm/arch-tegra20}/tegra_mmc.h (96%) create mode
100644 doc/device-tree-bindings/nand/nvidia,tegra20-nand.txt create
mode 100644 drivers/mtd/nand/tegra_nand.c create mode 100644
drivers/mtd/nand/tegra_nand.h create mode 100644
include/configs/integrator-common.h rename
include/configs/{tegra20-common-post.h => tegra-common-post.h} (96%)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-09-01 16:37 Albert ARIBAUD
@ 2012-09-01 22:27 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-09-01 22:27 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <20120901183740.7da03f77@lilith> you wrote:
>
> The following changes since commit
> 27e301e5b7df6254c768d27130d3a36c31d55c96:
>
> CREDITS: Add credits for MCF5249 initialization code (2012-09-01
> 14:50:09 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to df95321ca1b06a6271c3959b371848c10019e165:
>
> at91: 9x5: Enable PMECC for 5series ek board. (2012-09-01 17:06:15
> +0200)
>
> ----------------------------------------------------------------
> Albert ARIBAUD (1):
> Revert "arm: armv7: add compile option -mno-unaligned-access if
> available"
>
> Allen Martin (16):
> tegra20: rename tegra2 -> tegra20
> tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
> tegra20: rename CONFIG_MACH_TEGRA_GENERIC
> tegra20: tec: add tegra20-common-post.h
> tegra20: make board mkdir commands unconditional
> mkconfig: remove bashisms and cleanup config.mk generation
> MAKEALL: update to work with new boards.cfg syntax
> ARM: Fix arm720t SPL build
> tegra20: remove timer_init from SPL build
> ARM: add tegra20 support to arm720t
> tegra20: add u-boot-*-tegra.bin targets
> tegra20: move SDRAM param save to later in boot
> tegra20: enable SPL for tegra20 boards
> arm: enable libgcc build for SPL
> spl: fix SPL build of private libgcc
> tegra20: Remove armv4t build flags
>
> Andreas Bie=C3=9Fmann (6):
> doc/git-mailrc: update at91 and avr32
> MAINTAINERS: fix entry of Ilko Iliev
> MAINTAINERS: fix Andreas Bie=C3=9Fmann AVR32 entry
> at91sam9263ek: fix 'update' script
> at91sam9263ek: remove unnecessary console_init_f
> arm:at91-boards: remove console_init_f where unnecessary
>
> Ashok Kumar Reddy (2):
> mx6qarm2:Use IMX_GPIO_NR macro
> mx5:Use IMX_GPIO_NR macro
>
> Beno=C3=AEt Th=C3=A9baudeau (20):
> rtc: imxdi: Initial support
> mxc_spi: Round up clock divider
> mx25: Enable dcache
> mx5: Enable dcache
> mx35: Fix typo on EDIO
> mx3: Fix typo on IPU_CONF_CSI_EN
> mx5/6 timer: Round up tick_to_time() value
> mx5: cosmetic: Clean up lowlevel_init
> mx35: Remove duplicate GPIO3_BASE_ADDR
> mx5/6: Fix cpu_mmc_init() return value
> mx35: Add cpu_mmc_init()
> mx5: Undeclare imx_decode_pll()
> mx35 iomux: Remove unused macro
> mx35: Fix broken pin definitions
> mx35: Remove declaration of non-existing function
> mx35: Move clock enums to clock.h
> mx35: Remove declaration of non-existing function
> mxc: Make gpio_get_value() use PSR
> mxc: Define architecture identifier
> fsl_esdhc: Remove cache snooping for i.MX
>
> Bo Shen (8):
> arm : Atmel : add at91sam9x5ek board support
> ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT
> arm : at91sam9x5 : fix a small bug for NAND
> Take over the maintainer for sam9g10 and sam9m10g45
> atmel: at91sam9x5: fix name error for spi
> spi: atmel: add WDRBT bit to avoid receive overrun
> arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
> atmel: at91sam9x5: add spi flash boot support
>
> Chandan Nath (3):
> am33xx: CPSW init and definitions
> am33xx: pin mux defintions for CPSW switch
> am335x_evm: CPSW support
>
> Cyril Chemparathy (1):
> cpsw: add driver for cpsw ethernet device
>
> Donghwa Lee (9):
> video: support exynos fimd driver for various exynos series
> EXYNOS5: support exynos5 lcd clock control
> EXYNOS5: support display system register control
> EXYNOS5: support display port phy control function
> EXYNOS5: add display port base address
> video: support exynos display port drivers
> video: add dp_enabled variable in vidinfo structure
> video: exynos fb driver supports display port feature
> video: support exynos pwm backlight driver
>
> Enric Balletb=C3=B2 i Serra (1):
> OMAP3: fix DRAM size for IGEP-based boards.
>
> Fabio Estevam (10):
> mx28evk: Turn on caches
> mx51evk: do not overwrite the console
> vision2: do not overwrite the console
> m28evk: Turn on caches
> apx4devkit: Turn on caches
> mx28evk: Remove unneeded 'undef'
> mxs: Use correct function name to initialize dram
> mx53loco: Use IMX_GPIO_NR macro
> mx51evk: Use IMX_GPIO_NR macro
> mx53ard: Use IMX_GPIO_NR macro
>
> Heiko Schocher (1):
> davinci: enbw_cmc: change switch init behaviour
>
> Igor Grinberg (1):
> arm: omap3: cm-t35: minor comment and printf change
>
> Ilya Yanok (3):
> omap24xx_i2c: add 2-byte address support
> am335x_evm: read the on-board EEPROM
> am335x_evm: enable SMSC PHY driver
>
> Jaehoon Chung (1):
> ARM: EXYNOS: fixed compiler warning message
>
> Javier Martinez Canillas (5):
> igep00x0: default to OMAP-specific serial driver
> igep00x0: default mmcrootfstype to EXT4
> OMAP3: igep00x0: Add config option to choose flash storage memory
> OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
> OMAP3: igep00x0: add SPL support for IGEP-based boards
>
> Jeroen Hofstee (1):
> arm: omap: Fix switching back to nandecc sw.
>
> John Rigby (1):
> u8500: Separating mmc config parameters from driver
>
> Lad, Prabhakar (7):
> da850/omap-l138: Add MMC support for DA850/OMAP-L138
> arm, davinci: perform check for initializing global data and
> serial init da850/omap-l138: Define SPI specific configs for SPL only
> when SPI is used da850/omap-l138: Add support to read u-boot image from
> MMC/SD da850/omap-l138: Fix NAND flash timings
> da850/omap-l138: Add support for NAND SPL
> da850/omap-l138: add support for direct NOR boot mode
>
> Laurence Withers (4):
> DaVinci DA8xx: tidy up clock ID definition
> DaVinci DA850: UART2 clock ID comes from ASYNC3
> DaVinci DA8xx: replace magic number for DDR speed
> DaVinci DA8xx: fix set_cpu_clk_info()
>
> Marek Vasut (18):
> dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
> dm: Move OMAP GPIO driver to drivers/gpio/
> MX28: SPI: Refactor spi_xfer a bit
> MX28: SPI: Pull out the PIO transfer function
> MX28: SPI: Add DMA transfer support
> MX28: Fix up the MMC driver DMA mode
> MX28: Split out the PIO and DMA transfer functions
> MX28: Transfer small blocks via PIO in MXS MMC
> MX28: Fix MXS MMC DMA issues
> MX28: Move the u-boot.bd info CPUDIR/SOCDIR
> MX28: Add SchulerControl SC_SPS_1 platform
> MX28: Drop the cp15 reconfiguration from SPL
> MX28: Shuffle around the power management code
> MX28: DMA: Align the struct mxs_dma_desc
> MX28: DMA: Prolong the DMA timeout
> MX28: SPI: Supercharge the SPI driver
> MX28: m28evk: Align SSP clock speed
> MX28: m28evk: Enable SPI DMA
>
> Markus Hubig (2):
> Enable the EMAC clock in at91_macb_hw_init().
> at91: Add support for taskit AT91SAM9G20 boards.
>
> Mathieu J. Poirier (10):
> snowball: Add support for ux500 based snowball board
> u8500: Moving prcmu to cpu directory
> snowball: Adding architecture dependent initialisation
> snowball: Adding CPU clock initialisation
> snowball: Moving to ux500.v2 addess scheme for PRCMU access
> snowball: applying power to LAN and GBF controllers
> u8500: Moving processor-specific functions to cpu area.
> u8500: Enabling power to MMC device on AB8500 V2
> armv7: Adding cpu specific cache managmenent
> snowball: Adding board specific cache cleanup routine
>
> Matt Sealey (9):
> spi: fix mxc_spi_slave structure allocation to clear memory
> spi: fix mxs_spi_slave structure allocation to clear memory
> mx5: add iomux-mx51.h include
> efikamx: move and rename Efika MX directories and config files to
> prepare for new boards efikamx: remove drive strength function and roll
> its functionality into the DCD efikamx: configure Smarttop PCBID and
> LED pads in DCD for convenience efikamx: update MAINTAINERS for Genesi
> Efika MX systems efikamx: update to Efika MX Smarttop and Smartbook
> boards efikamx: sync Smartbook DDR settings in DCD with those found in
> Genesi's production U-Boot
>
> Mikhail Kshevetskiy (3):
> arm/davinci: fix DDR2/mDDR memory controller initialization for
> Omap L138 arm/davinci/da850: add uart0 pinmux
> serial/ns16550: ns16550 has a different register layout on
> SOC_DA8XX
>
> Otavio Salvador (19):
> imx: Use a clear identification of an unidentified CPU type
> MX28: extend print_cpuinfo() to use chip information
> MX28: use a clear name for DDR2 initialization
> mxs: reorganize source directory for easy sharing of code in
> i.MXS SoCs mxs: prefix register acessor macros with 'mxs' prefix
> mxs: prefix register structs with 'mxs' prefix
> mxs: Reowork SPL to use 'mxs' prefix for methods
> mxs: Clarify why we poweroff in case of brownout in 5v conflict
> mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28
> SoCs sc_sps_1: Adjust board config to use 'mxs' SoC code
> mxs: Remove not required explicit iomux-mx28.h include
> mxs: Remove not required include of iomux-mx28.h
> mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
> mxs: Convert sys_proto.h prefixes to 'mxs'
> MX28: config: Allow different target generation in elftosb call
> MX28: Move "regs-base.h" include after SoC type configuration
> mxs: Replace i.MX233 by i.MX23 on copyright header
> mxs: Only build internal Ethernet controller for i.MX28
> mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
>
> Peter Meerwald (4):
> beagle: make get_expansion_id(), get_board_revision(),
> beagle_display_init() static beagle: fix termination of buddy env
> setting beagle: removed unused pr_debug #define
> beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
>
> Rajashekhara, Sudhakar (2):
> da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
> da850/omap-l138: Make MMC and NOR support mutually exclusive
>
> Rajeshwari Shinde (10):
> ARCH: SPL: Add parametric board initializer
> SMDK5250: SPL: Define parametric board initializer
> SMDK5250: Add smdk5250-uboot-spl.lds
> EXYNOS5: CLOCK: define additional clock registers for Exynos5250
> Rev 1.0 EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
> Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Add BPLL support
> EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
> SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
>
> Rob Herring (1):
> ARM: Remove unused stack and irq config defines
>
> Satyanarayana, Sandhya (1):
> am33xx evm: Update secure_emif_sdram_config during ddr init
>
> Stathis Voukelatos (1):
> i.MX28: bug fixes in PMU configuration code
>
> Stefano Babic (7):
> mcx: increased buffer for command line
> OMAP3: mcx: set pinmux for uart4
> OMAP3: mcx: updated default environment
> OMAP3: mcx: read hot-water-button after reset
> MX5: mx53loco: do not overwrite the console
> MX: Set a common gpio.h for all i.MX
> MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR
>
> Stephen Warren (4):
> README: fix references to config_cmd_default.h
> ARM: arm1176: enable instruction cache in arch_cpu_init()
> ARM: add basic support for the Broadcom BCM2835 SoC
> ARM: add Raspberry Pi model B board, using BCM2835 SoC
>
> Steve Sakoman (3):
> omap: am335x_evm: remove unused definitions
> omap: am33xx: enable gpio support
> omap: am335x_evm: enable i2c1 channel
>
> Sughosh Ganu (2):
> hawkboard/omapl-138: Add support for generating ais image for
> hawkboard da8xx/hawkboard: Add support for ohci host controller
>
> Tetsuyuki Kobayashi (1):
> arm: bugfix: save_boot_params_default accesses uninitalized stack
> when -O0
>
> Tom Rini (33):
> am33xx: Enable gpio0 clock
> am335x_evm: Update config for common usage
> am33xx: Remove DMM_BASE define
> am33xx: Convert to using <asm/emif.h> to describe the EMIF
> am33xx: Remove extra check in enable_ddr_clocks
> am33xx: Bugfix to config_sdram()
> am33xx: Rework DDR2 EMIF initalization slightly
> am33xx: Make config_cmd_ctrl / config_ddr_data take const structs
> am33xx: Pass to config_ddr the type of memory that is connected
> am33xx: Move the call to ddr_pll_config, make it take the
> frequency am33xx: Clean up unused DDR defines, prefix more with 'DDR2'
> am33xx: Document what we're doing with ddrctrl->ddrckectrl
> am33xx: Turn a number of 'int' functions to 'void'
> am33xx: Use emif_regs struct for storing initialization values
> am33xx: Rework config_io_ctrl slightly
> am33xx: Do not touch 'ratio1' fields
> am33xx: Correct and clean up ddr_regs struct
> am33xx: Move some variables in emif4.c, mark them static.
> am33xx: Rework config_ddr to make DDR3 support easier.
> am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support
> am33xx: Remove board/ti/am335x/evm.c
> am33xx: Add support for TI AM335x StarterKit EVM
> am33xx evm: Add CONFIG_CMD_EEPROM and related
> am33xx: Rework pinmux functions
> doc/git-mailrc: Update 'ti' alias
> am335x evm: Initial support for AM335x GP EVM Profiles
> am33xx: Correct MMC1, remove MMC2 support
> am335x evm: Enable MMC1 pinmux
> am33xx: Add support, update omap3 McSPI driver
> am335x evm: Enable support for spi0
> omap4/5/am33xx: Make lowlevel_init available to all armv7
> platforms armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible
> stack davinci, c6x: Always use C version of reset code
>
> Troy Kisky (4):
> iomux: move IOMUX_GPR13_xxx defines
> imx-common/cmd_bmode.c: add imx bmode (bootmode) command
> mx6qsabrelite: add boot_mode support
> mx53evk: add boot_mode support
>
> Vaibhav Bedia (1):
> am335x: ddr_defs: Update EMIF parameters
>
> Veli-Pekka Peltola (1):
> Add support for Bluegiga APX4 Development Kit
>
> Vikram Narayanan (1):
> tx25: Use generic gpio_* calls
>
> Wu, Josh (5):
> at91: atmel_nand: extract HWECC initialization code into one
> function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused
> variables. at91: atmel_nand: Update driver to support Programmable
> Multibit ECC controller at91: 9x5: change SMC config timing that both
> works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek
> board.
>
> Xu, Hong (1):
> AT91: Small fix on AT91 USART initialization code
>
> Zhong Hongbo (1):
> arm/s5pxx: Fix get_timer_masked to get the time.
>
> fabio.estevam at freescale.com (1):
> mxs: Convert timeout parameter to 'unsigned int'
>
> trem (3):
> rtc: add support of mx27 rtc
> gpio: add gpio api support to mx27 (v4)
> imx27lite: update with gpio api change (v4)
>
> =C5=81ukasz Majewski (3):
> arm:trats: loaduimage environment variable defied for TRATS target
> arm:exynos: Enable data cache at exynos based processors.
> arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS
> Samsung board
>
> .gitignore | 3 +
> MAINTAINERS | 63 +-
> MAKEALL | 9 +-
> Makefile | 36 +-
> README | 4 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 19 +-
> arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
> arch/arm/cpu/arm1176/bcm2835/Makefile | 37 +
> arch/arm/cpu/arm1176/bcm2835/config.mk | 19 +
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 +
> arch/arm/cpu/arm1176/bcm2835/reset.c | 35 +
> arch/arm/cpu/arm1176/bcm2835/timer.c | 55 +
> arch/arm/cpu/arm1176/cpu.c | 7 +
> arch/arm/cpu/arm720t/cpu.c | 2 +
> arch/arm/cpu/arm720t/interrupts.c | 5 +
> arch/arm/cpu/arm720t/start.S | 25 +-
> arch/arm/cpu/arm720t/tegra20/Makefile | 48 +
> arch/arm/cpu/arm720t/tegra20/board.h | 25 +
> .../arm/cpu/arm720t/tegra20}/config.mk | 17 +-
> .../{armv7/tegra2/ap20.c =3D> arm720t/tegra20/cpu.c} | 148 +--
> arch/arm/cpu/arm720t/tegra20/cpu.h | 100 ++
> arch/arm/cpu/arm720t/tegra20/spl.c | 133 ++
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232 ++++
> arch/arm/cpu/arm926ejs/at91/clock.c | 12 +-
> arch/arm/cpu/arm926ejs/davinci/Makefile | 4 +-
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 22 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +-
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 16 +
> arch/arm/cpu/arm926ejs/davinci/psc.c | 5 +
> arch/arm/cpu/arm926ejs/davinci/reset.S | 81 --
> arch/arm/cpu/arm926ejs/davinci/reset.c | 33 +
> arch/arm/cpu/arm926ejs/davinci/spl.c | 20 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
> arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/clock.c | 40 +-
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/{mx28/mx28.c =3D> mxs/mxs.c} | 108 +-
> .../arm926ejs/{mx28/mx28_init.h =3D> mxs/mxs_init.h} | 14 +-
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_boot.c | 27 +-
> .../cpu/arm926ejs/{mx28 =3D> mxs}/spl_lradc_init.c | 10 +-
> .../arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_mem_init.c | 65 +-
> .../cpu/arm926ejs/{mx28 =3D> mxs}/spl_power_init.c | 279 ++---
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/start.S | 42 -
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/timer.c | 10 +-
> .../arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 0
> .../arm/cpu/arm926ejs/{mx28 =3D> mxs}/u-boot-spl.lds | 2 +-
> arch/arm/cpu/armv7/Makefile | 6 +-
> arch/arm/cpu/armv7/am33xx/board.c | 212 +++-
> arch/arm/cpu/armv7/am33xx/clock.c | 47 +-
> arch/arm/cpu/armv7/am33xx/ddr.c | 90 +-
> arch/arm/cpu/armv7/am33xx/emif4.c | 240 ++--
> arch/arm/cpu/armv7/config.mk | 2 -
> arch/arm/cpu/armv7/cpu.c | 13 +-
> arch/arm/cpu/armv7/exynos/clock.c | 139 ++-
> arch/arm/cpu/armv7/exynos/pinmux.c | 22 +-
> arch/arm/cpu/armv7/exynos/power.c | 21 +
> arch/arm/cpu/armv7/exynos/soc.c | 8 +
> arch/arm/cpu/armv7/exynos/system.c | 18 +
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 ++
> arch/arm/cpu/armv7/imx-common/cpu.c | 10 +-
> arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
> arch/arm/cpu/armv7/lowlevel_init.S | 51 +
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +-
> arch/arm/cpu/armv7/mx5/soc.c | 39 +
> arch/arm/cpu/armv7/mx6/soc.c | 36 +
> arch/arm/cpu/armv7/omap-common/Makefile | 3 -
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 18 -
> arch/arm/cpu/armv7/s5p-common/pwm.c | 2 +-
> arch/arm/cpu/armv7/s5p-common/timer.c | 20 +-
> arch/arm/cpu/armv7/start.S | 20 +-
> arch/arm/cpu/armv7/{tegra2 =3D> tegra20}/Makefile | 15 +-
> .../cpu/armv7/{tegra2 =3D> tegra20}/cmd_enterrcm.c | 4 +-
> arch/arm/cpu/armv7/{tegra2 =3D> tegra20}/config.mk | 12 -
> arch/arm/cpu/armv7/{tegra2 =3D> tegra20}/usb.c | 2 +-
> arch/arm/cpu/armv7/u8500/Makefile | 2 +-
> arch/arm/cpu/armv7/u8500/clock.c | 34 +
> arch/arm/cpu/armv7/u8500/cpu.c | 192 +++
> .../arm/cpu/armv7}/u8500/prcmu.c | 128 +-
> arch/arm/cpu/tegra20-common/Makefile | 55 +
> arch/arm/cpu/tegra20-common/ap20.c | 131 ++
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/board.c | 39 +-
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/clock.c | 10 +-
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/crypto.c | 0
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/crypto.h | 0
> .../arm/cpu/{armv7/tegra2 =3D> tegra20-common}/emc.c | 2 +-
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/funcmux.c | 2 +-
> .../tegra2 =3D> tegra20-common}/lowlevel_init.S | 0
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/pinmux.c | 4 +-
> .../arm/cpu/{armv7/tegra2 =3D> tegra20-common}/pmu.c | 2 +-
> .../{armv7/tegra2 =3D> tegra20-common}/sys_info.c | 2 +-
> .../cpu/{armv7/tegra2 =3D> tegra20-common}/timer.c | 2 +-
> .../{armv7/tegra2 =3D> tegra20-common}/warmboot.c | 18 +-
> .../tegra2 =3D> tegra20-common}/warmboot_avp.c | 4 +-
> .../tegra2 =3D> tegra20-common}/warmboot_avp.h | 0
> arch/arm/include/asm/arch-am33xx/common_def.h | 23 -
> arch/arm/include/asm/arch-am33xx/cpu.h | 33 +
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 184 +--
> arch/arm/include/asm/arch-am33xx/gpio.h | 29 +
> arch/arm/include/asm/arch-am33xx/hardware.h | 9 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 +-
> arch/arm/include/asm/arch-am33xx/omap.h | 1 -
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 30 +
> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 170 +++
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 91 ++
> arch/arm/include/asm/arch-at91/hardware.h | 2 +
> arch/arm/include/asm/arch-bcm2835/gpio.h | 66 +
> arch/arm/include/asm/arch-bcm2835/timer.h | 37 +
> arch/arm/include/asm/arch-bcm2835/wdog.h | 36 +
> .../arm/include/asm/arch-davinci/da8xx-usb.h | 7 +-
> arch/arm/include/asm/arch-davinci/hardware.h | 60 +-
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 4 +
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 237 ++--
> arch/arm/include/asm/arch-exynos/cpu.h | 3 +
> arch/arm/include/asm/arch-exynos/dmc.h | 65 +
> arch/arm/include/asm/arch-exynos/dp.h | 751 ++++++++++++
> arch/arm/include/asm/arch-exynos/dp_info.h | 214 ++++
> arch/arm/include/asm/arch-exynos/fb.h | 27 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 7 +-
> arch/arm/include/asm/arch-exynos/power.h | 5 +
> arch/arm/include/asm/arch-exynos/pwm_backlight.h | 34 +
> arch/arm/include/asm/arch-exynos/spl.h | 97 ++
> arch/arm/include/asm/arch-imx/imx-regs.h | 3 +
> arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
> arch/arm/include/asm/arch-mx25/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx27/gpio.h | 55 +
> arch/arm/include/asm/arch-mx27/imx-regs.h | 35 +-
> arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +
> arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 4 +-
> arch/arm/include/asm/arch-mx35/clock.h | 28 +-
> arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
> arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 31 +-
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
> arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
> arch/arm/include/asm/arch-mx5/clock.h | 2 -
> arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 20 +
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164 +++
> arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 25 +-
> arch/arm/include/asm/arch-mx6/iomux.h | 129 ++
> .../include/asm/{arch-mx28 =3D> arch-mxs}/clock.h | 0
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/dma.h | 3 +-
> .../arm/include/asm/{arch-mx28 =3D> arch-mxs}/gpio.h | 0
> .../include/asm/{arch-mx28 =3D> arch-mxs}/imx-regs.h | 2 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/iomux-mx28.h | 0
> .../include/asm/{arch-mx28 =3D> arch-mxs}/iomux.h | 0
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-apbh.h | 256 ++--
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-base.h | 0
> .../include/asm/{arch-mx28 =3D> arch-mxs}/regs-bch.h | 44 +-
> .../regs-clkctrl-mx28.h} | 60 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-common.h | 34 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-digctl.h | 56 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-gpmi.h | 28 +-
> .../include/asm/{arch-mx28 =3D> arch-mxs}/regs-i2c.h | 30 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-lcdif.h | 66 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-lradc.h | 50 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-ocotp.h | 88 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-pinctrl.h | 170 +--
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-power.h | 30 +-
> .../include/asm/{arch-mx28 =3D> arch-mxs}/regs-rtc.h | 30 +-
> .../include/asm/{arch-mx28 =3D> arch-mxs}/regs-ssp.h | 42 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-timrot.h | 40 +-
> .../include/asm/{arch-mx28 =3D> arch-mxs}/regs-usb.h | 2 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/regs-usbphy.h | 22 +-
> .../asm/{arch-mx28 =3D> arch-mxs}/sys_proto.h | 28 +-
> arch/arm/include/asm/arch-omap3/mem.h | 29 +
> arch/arm/include/asm/arch-omap4/omap.h | 1 -
> arch/arm/include/asm/arch-omap5/omap.h | 2 -
> .../asm/{arch-tegra2 =3D> arch-tegra20}/ap20.h | 4 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/apb_misc.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/board.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/clk_rst.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/clock.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/emc.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/flow.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/funcmux.h | 2 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/fuse.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/gp_padctrl.h | 2 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/gpio.h | 2 +-
> arch/arm/include/asm/arch-tegra20/hardware.h | 29 +
> .../asm/{arch-tegra2 =3D> arch-tegra20}/mmc.h | 8 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/pinmux.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/pmc.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/pmu.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/scu.h | 0
> .../{arch-tegra2 =3D> arch-tegra20}/sdram_param.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/sys_proto.h | 4 +-
> .../tegra2.h =3D> arch-tegra20/tegra20.h} | 18 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/tegra_i2c.h | 2 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/tegra_spi.h | 4 +-
> .../asm/{arch-tegra2 =3D> arch-tegra20}/timer.h | 6 +-
> .../uart-spi-switch.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/uart.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/usb.h | 0
> .../asm/{arch-tegra2 =3D> arch-tegra20}/warmboot.h | 0
> arch/arm/include/asm/arch-u8500/clock.h | 5 +-
> arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 +
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++
> arch/arm/include/asm/arch-u8500/hardware.h | 33 +-
> .../arm/include/asm/arch-u8500/prcmu.h | 35 +-
> arch/arm/include/asm/arch-u8500/sys_proto.h | 1 +
> arch/arm/include/asm/emif.h | 8 +-
> arch/arm/include/asm/imx-common/boot_mode.h | 36 +
> arch/arm/include/asm/imx-common/gpio.h | 39 +
> arch/arm/include/asm/imx-common/iomux-v3.h | 111 --
> arch/arm/include/asm/omap_common.h | 2 +-
> arch/arm/lib/Makefile | 2 +-
> board/BuS/eb_cpux9k2/cpux9k2.c | 2 -
> board/BuS/vl_ma2sc/vl_ma2sc.c | 3 -
> board/CarMediaLab/flea3/flea3.c | 6 +-
> board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +-
> board/atmel/at91sam9261ek/at91sam9261ek.c | 3 -
> board/atmel/at91sam9263ek/at91sam9263ek.c | 3 -
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 -
> board/atmel/at91sam9rlek/at91sam9rlek.c | 3 -
> board/atmel/at91sam9x5ek/Makefile | 52 +
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 295 +++++
> board/atmel/at91sam9x5ek/config.mk | 1 +
> board/avionic-design/common/tamonten.c | 4 +-
> .../dts/{tegra2-medcom.dts =3D> tegra20-medcom.dts} | 0
> .../dts/{tegra2-plutux.dts =3D> tegra20-plutux.dts} | 0
> .../dts/{tegra2-tec.dts =3D> tegra20-tec.dts} | 0
> board/avionic-design/medcom/Makefile | 2 -
> board/avionic-design/plutux/Makefile | 2 -
> board/avionic-design/tec/Makefile | 2 -
> board/bluegiga/apx4devkit/Makefile | 47 +
> board/bluegiga/apx4devkit/apx4devkit.c | 150 +++
> board/bluegiga/apx4devkit/spl_boot.c | 164 +++
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 -
> board/calao/tny_a9260/tny_a9260.c | 3 -
> board/cm_t35/cm_t35.c | 4 +-
> .../dts/{tegra2-paz00.dts =3D> tegra20-paz00.dts} | 0
> board/compal/paz00/Makefile | 2 -
> board/compal/paz00/paz00.c | 6 +-
> ...{tegra2-trimslice.dts =3D> tegra20-trimslice.dts} | 0
> board/compulab/trimslice/Makefile | 2 -
> board/compulab/trimslice/trimslice.c | 6 +-
> board/davinci/da8xxevm/da850evm.c | 54 +-
> board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
> board/davinci/da8xxevm/hawkboard.c | 41 +
> board/denx/m28evk/m28evk.c | 10 +-
> board/denx/m28evk/spl_boot.c | 2 +-
> board/efikamx/efikamx.c | 735 -----------
> board/enbw/enbw_cmc/enbw_cmc.c | 102 +-
> board/esg/ima3-mx53/ima3-mx53.c | 2 +-
> board/eukrea/cpuat91/cpuat91.c | 2 -
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 6 +-
> board/freescale/mx28evk/u-boot.bd | 14 -
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 32 +-
> board/freescale/mx53ard/mx53ard.c | 14 +-
> board/freescale/mx53evk/mx53evk.c | 25 +-
> board/freescale/mx53loco/mx53loco.c | 26 +-
> board/freescale/mx53smd/mx53smd.c | 6 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 8 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 47 +-
> board/{efikamx =3D> genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx =3D> genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/genesi/mx51_efikamx/efikamx.c | 512 ++++++++
> .../mx51_efikamx}/imximage_mx.cfg | 50 +-
> .../mx51_efikamx}/imximage_sb.cfg | 44 +-
> board/htkw/mcx/mcx.c | 23 +
> board/htkw/mcx/mcx.h | 11 +-
> board/isee/igep0020/igep0020.c | 42 +-
> board/isee/igep0020/igep0020.h | 4 +
> board/isee/igep0030/igep0030.c | 42 +-
> board/isee/igep0030/igep0030.h | 4 +
> board/karo/tx25/tx25.c | 25 +-
> board/logicpd/imx27lite/imx27lite.c | 5 +-
> board/nvidia/common/board.c | 17 +-
> board/nvidia/common/emc.c | 2 +-
> board/nvidia/common/uart-spi-switch.c | 2 +-
> .../{tegra2-harmony.dts =3D> tegra20-harmony.dts} | 2 +-
> .../{tegra2-seaboard.dts =3D> tegra20-seaboard.dts} | 0
> .../{tegra2-ventana.dts =3D> tegra20-ventana.dts} | 2 +-
> .../{tegra2-whistler.dts =3D> tegra20-whistler.dts} | 2 +-
> board/nvidia/harmony/harmony.c | 6 +-
> board/nvidia/seaboard/seaboard.c | 6 +-
> board/nvidia/whistler/whistler.c | 6 +-
> board/raspberrypi/rpi_b/Makefile | 34 +
> board/raspberrypi/rpi_b/rpi_b.c | 34 +
> board/samsung/smdk5250/Makefile | 3 +-
> board/samsung/smdk5250/clock_init.c | 714 +++++++++--
> board/samsung/smdk5250/clock_init.h | 149 +++
> board/samsung/smdk5250/dmc_common.c | 199 +++
> board/samsung/smdk5250/dmc_init.c | 462 -------
> board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++
> board/samsung/smdk5250/setup.h | 763 +++++++-----
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +
> board/samsung/smdk5250/smdk5250.c | 6 +-
> board/samsung/smdk5250/smdk5250_spl.c | 68 ++
> .../config.mk =3D> schulercontrol/sc_sps_1/Makefile} | 40 +-
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++
> board/schulercontrol/sc_sps_1/spl_boot.c | 165 +++
> board/st-ericsson/snowball/Makefile | 49 +
> board/st-ericsson/snowball/db8500_pins.h | 745 +++++++++++
> board/st-ericsson/snowball/snowball.c | 348 ++++++
> board/st-ericsson/u8500/Makefile | 2 +-
> board/st-ericsson/u8500/u8500_href.c | 100 +-
> board/syteco/zmx25/zmx25.c | 26 +-
> board/taskit/stamp9g20/Makefile | 53 +
> board/taskit/stamp9g20/led.c | 138 +++
> board/taskit/stamp9g20/stamp9g20.c | 191 +++
> board/ti/am335x/Makefile | 4 +-
> board/ti/am335x/evm.c | 44 -
> board/ti/am335x/mux.c | 163 ++-
> board/ti/beagle/beagle.c | 12 +-
> board/ttcontrol/vision2/vision2.c | 13 +-
> boards.cfg | 41 +-
> doc/README.atmel_pmecc | 44 +
> doc/README.m28 | 4 +-
> doc/README.mx28evk | 4 +-
> doc/git-mailrc | 7 +-
> drivers/dma/apbh_dma.c | 38 +-
> drivers/gpio/Makefile | 3 +
> drivers/gpio/bcm2835_gpio.c | 89 ++
> drivers/gpio/db8500_gpio.c | 221 ++++
> drivers/gpio/mxc_gpio.c | 10 +-
> drivers/gpio/mxs_gpio.c | 16 +-
> .../omap-common/gpio.c =3D> drivers/gpio/omap_gpio.c | 0
> drivers/gpio/tegra_gpio.c | 12 +-
> drivers/i2c/mxs_i2c.c | 14 +-
> drivers/i2c/omap24xx_i2c.c | 58 +-
> drivers/i2c/tegra_i2c.c | 12 +-
> drivers/input/Makefile | 2 +-
> drivers/mmc/Makefile | 4 +
> drivers/mmc/arm_pl180_mmci.c | 131 +-
> drivers/mmc/arm_pl180_mmci.h | 27 +-
> drivers/mmc/fsl_esdhc.c | 5 +-
> drivers/mmc/mxsmmc.c | 204 ++--
> drivers/mmc/spl_mmc_load.c | 62 +
> drivers/mmc/tegra_mmc.c | 32 +-
> drivers/mmc/tegra_mmc.h | 12 +-
> drivers/mtd/nand/atmel_nand.c | 827 ++++++++++++-
> drivers/mtd/nand/atmel_nand_ecc.h | 113 ++
> drivers/mtd/nand/mxs_nand.c | 18 +-
> drivers/mtd/nand/omap_gpmc.c | 1 +
> drivers/net/Makefile | 1 +
> drivers/net/cpsw.c | 991
> +++++++++++++++ drivers/net/macb.c
> | 4 +- drivers/rtc/Makefile | 2 +
> drivers/rtc/imxdi.c | 244 ++++
> drivers/rtc/mx27rtc.c | 83 ++
> drivers/rtc/mxsrtc.c | 10 +-
> drivers/serial/atmel_usart.c | 11 +-
> drivers/serial/ns16550.c | 2 +-
> drivers/serial/serial_pl01x.c | 2 +
> drivers/spi/atmel_spi.c | 3 +
> drivers/spi/atmel_spi.h | 1 +
> drivers/spi/mxc_spi.c | 6 +-
> drivers/spi/mxs_spi.c | 244 +++-
> drivers/spi/omap3_spi.c | 16 +
> drivers/spi/omap3_spi.h | 5 +
> drivers/spi/tegra_spi.c | 10 +-
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-mxs.c | 26 +-
> drivers/usb/host/ohci-da8xx.c | 48 +
> drivers/usb/musb/da8xx.c | 3 +-
> drivers/video/Makefile | 2 +
> drivers/video/exynos_dp.c | 925
> ++++++++++++++ drivers/video/exynos_dp_lowlevel.c |
> 1291 ++++++++++++++++++++
> drivers/video/exynos_dp_lowlevel.h | 80 ++
> drivers/video/exynos_fb.c | 5 +-
> drivers/video/exynos_fimd.c | 91 +-
> drivers/video/exynos_pwm_bl.c | 57 +
> include/configs/SX1.h | 13 -
> include/configs/VCMA9.h | 12 -
> include/configs/a320evb.h | 13 -
> include/configs/actux1.h | 6 -
> include/configs/actux2.h | 6 -
> include/configs/actux3.h | 7 -
> include/configs/actux4.h | 6 -
> include/configs/adp-ag101.h | 7 -
> include/configs/adp-ag101p.h | 7 -
> include/configs/adp-ag102.h | 7 -
> include/configs/afeb9260.h | 5 -
> include/configs/am335x_evm.h | 114 +-
> include/configs/am3517_crane.h | 8 -
> include/configs/am3517_evm.h | 8 -
> include/configs/apollon.h | 8 -
> include/configs/apx4devkit.h | 236 ++++
> include/configs/at91rm9200ek.h | 3 -
> include/configs/at91sam9260ek.h | 7 -
> include/configs/at91sam9261ek.h | 9 -
> include/configs/at91sam9263ek.h | 7 +-
> include/configs/at91sam9m10g45ek.h | 8 -
> include/configs/at91sam9rlek.h | 5 -
> include/configs/at91sam9x5ek.h | 200 +++
> include/configs/balloon3.h | 9 -
> include/configs/ca9x4_ct_vxp.h | 7 -
> include/configs/calimain.h | 1 -
> include/configs/cam_enc_4xx.h | 2 -
> include/configs/cm4008.h | 13 -
> include/configs/cm41xx.h | 13 -
> include/configs/cm_t35.h | 9 +-
> include/configs/colibri_pxa270.h | 11 -
> include/configs/cpu9260.h | 7 -
> include/configs/cpuat91.h | 10 -
> include/configs/da830evm.h | 2 -
> include/configs/da850evm.h | 94 +-
> include/configs/davinci_dm355evm.h | 2 -
> include/configs/davinci_dm355leopard.h | 2 -
> include/configs/davinci_dm365evm.h | 2 -
> include/configs/davinci_dm6467evm.h | 2 -
> include/configs/davinci_dvevm.h | 2 -
> include/configs/davinci_schmoogie.h | 2 -
> include/configs/davinci_sffsdr.h | 2 -
> include/configs/davinci_sonata.h | 2 -
> include/configs/devkit3250.h | 1 -
> include/configs/devkit8000.h | 7 +-
> include/configs/dig297.h | 13 +-
> include/configs/dvlhost.h | 7 -
> include/configs/ea20.h | 1 -
> include/configs/eb_cpux9k2.h | 2 -
> include/configs/edminiv2.h | 1 -
> include/configs/enbw_cmc.h | 1 -
> include/configs/ethernut5.h | 5 +-
> include/configs/flea3.h | 8 -
> include/configs/harmony.h | 14 +-
> include/configs/hawkboard.h | 16 +-
> include/configs/highbank.h | 11 -
> include/configs/igep00x0.h | 96 +-
> include/configs/ima3-mx53.h | 3 -
> include/configs/imx27lite-common.h | 6 +-
> include/configs/imx31_litekit.h | 7 -
> include/configs/imx31_phycore.h | 7 -
> include/configs/integratorap.h | 11 -
> include/configs/integratorcp.h | 11 -
> include/configs/jadecpu.h | 7 -
> include/configs/jornada.h | 7 -
> include/configs/km/km_arm.h | 1 -
> include/configs/lubbock.h | 12 -
> include/configs/m28evk.h | 16 +-
> include/configs/mcx.h | 140 ++-
> include/configs/medcom.h | 12 +-
> include/configs/meesc.h | 7 -
> include/configs/mv-common.h | 1 -
> include/configs/mx1ads.h | 12 -
> include/configs/mx25pdk.h | 3 -
> include/configs/mx28evk.h | 13 +-
> include/configs/mx31ads.h | 7 -
> include/configs/mx31pdk.h | 7 -
> include/configs/mx35pdk.h | 8 -
> include/configs/{efikamx.h =3D> mx51_efikamx.h} | 7 -
> include/configs/mx51evk.h | 9 +-
> include/configs/mx53ard.h | 3 -
> include/configs/mx53evk.h | 6 +-
> include/configs/mx53loco.h | 5 +-
> include/configs/mx53smd.h | 3 -
> include/configs/mx6qarm2.h | 1 -
> include/configs/mx6qsabrelite.h | 7 +-
> include/configs/nhk8815.h | 6 -
> include/configs/ns9750dev.h | 4 -
> include/configs/omap1510inn.h | 13 -
> include/configs/omap2420h4.h | 12 -
> include/configs/omap3_beagle.h | 12 +-
> include/configs/omap3_evm_common.h | 9 +-
> include/configs/omap3_logic.h | 10 +-
> include/configs/omap3_mvblx.h | 9 +-
> include/configs/omap3_overo.h | 10 +-
> include/configs/omap3_pandora.h | 9 +-
> include/configs/omap3_sdp3430.h | 8 -
> include/configs/omap3_zoom1.h | 8 -
> include/configs/omap3_zoom2.h | 9 +-
> include/configs/omap4_common.h | 21 +-
> include/configs/omap5912osk.h | 13 -
> include/configs/omap5_evm.h | 20 +-
> include/configs/omap730p2.h | 14 -
> include/configs/origen.h | 8 -
> include/configs/otc570.h | 7 -
> include/configs/palmld.h | 9 -
> include/configs/palmtc.h | 9 -
> include/configs/paz00.h | 12 +-
> include/configs/pdnb3.h | 11 -
> include/configs/plutux.h | 12 +-
> include/configs/pm9261.h | 7 -
> include/configs/pm9263.h | 7 -
> include/configs/pm9g45.h | 6 -
> include/configs/pxa255_idp.h | 13 -
> include/configs/qong.h | 6 -
> include/configs/rpi_b.h | 104 ++
> include/configs/s5p_goni.h | 3 -
> include/configs/s5pc210_universal.h | 3 -
> include/configs/sbc35_a9g20.h | 6 -
> include/configs/sc_sps_1.h | 208 ++++
> include/configs/scb9328.h | 8 -
> include/configs/seaboard.h | 20 +-
> include/configs/smdk2410.h | 13 -
> include/configs/smdk5250.h | 10 +-
> include/configs/smdk6400.h | 7 -
> include/configs/smdkc100.h | 7 -
> include/configs/smdkv310.h | 8 -
> include/configs/snapper9260.h | 2 -
> include/configs/snowball.h | 266 ++++
> include/configs/spear-common.h | 8 -
> include/configs/stamp9g20.h | 266 ++++
> include/configs/tam3517-common.h | 9 +-
> include/configs/tec.h | 12
> +- ...{tegra2-common-post.h =3D> tegra20-common-post.h} | 73
> +- .../configs/{tegra2-common.h =3D> tegra20-common.h} | 50 +-
> include/configs/tnetv107x_evm.h | 1 -
> include/configs/tny_a9260.h | 7 -
> include/configs/top9000.h | 5 -
> include/configs/trats.h | 10 +-
> include/configs/tricorder.h | 4 -
> include/configs/trimslice.h | 14 +-
> include/configs/trizepsiv.h | 13 -
> include/configs/tt01.h | 3 -
> include/configs/tx25.h | 1 -
> include/configs/u8500_href.h | 10 -
> include/configs/vct.h | 1 -
> include/configs/ventana.h | 12 +-
> include/configs/versatile.h | 11 -
> include/configs/vision2.h | 7 +-
> include/configs/vl_ma2sc.h | 9 -
> include/configs/vpac270.h | 8 -
> include/configs/whistler.h | 14 +-
> include/configs/xaeniax.h | 15 -
> include/configs/zipitz2.h | 10 -
> include/configs/zmx25.h | 1 -
> include/cpsw.h | 51 +
> include/fdtdec.h | 12 +-
> include/fsl_esdhc.h | 1 -
> include/lcd.h | 1 +
> include/mmc.h | 2 +
> include/nand.h | 2 +-
> include/ns16550.h | 9 +
> include/serial.h | 2 +-
> mkconfig | 38 +-
> spl/Makefile | 10 + 539 files
> changed, 19426 insertions(+), 5730 deletions(-) create mode 100644
> arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> arch/arm/cpu/arm720t/tegra20/Makefile create mode 100644
> arch/arm/cpu/arm720t/tegra20/board.h rename {board/isee/igep0030 =3D>
> arch/arm/cpu/arm720t/tegra20}/config.mk (66%) rename
> arch/arm/cpu/{armv7/tegra2/ap20.c =3D> arm720t/tegra20/cpu.c} (63%)
> create mode 100644 arch/arm/cpu/arm720t/tegra20/cpu.h create mode
> 100644 arch/arm/cpu/arm720t/tegra20/spl.c create mode 100644
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c delete mode 100644
> arch/arm/cpu/arm926ejs/davinci/reset.S create mode 100644
> arch/arm/cpu/arm926ejs/davinci/reset.c rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/Makefile (97%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/clock.c (89%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/iomux.c (94%) rename
> arch/arm/cpu/arm926ejs/{mx28/mx28.c =3D> mxs/mxs.c} (69%) rename
> arch/arm/cpu/arm926ejs/{mx28/mx28_init.h =3D> mxs/mxs_init.h} (81%)
> rename arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_boot.c (85%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_lradc_init.c (91%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_mem_init.c (83%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/spl_power_init.c (81%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/start.S (82%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/timer.c (93%) rename
> board/denx/m28evk/u-boot.bd =3D>
> arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd (100%) rename
> arch/arm/cpu/arm926ejs/{mx28 =3D> mxs}/u-boot-spl.lds (97%) create mode
> 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c create mode 100644
> arch/arm/cpu/armv7/lowlevel_init.S rename arch/arm/cpu/armv7/{tegra2
> =3D> tegra20}/Makefile (69%) rename arch/arm/cpu/armv7/{tegra2 =3D>
> tegra20}/cmd_enterrcm.c (94%) rename arch/arm/cpu/armv7/{tegra2 =3D>
> tegra20}/config.mk (74%) rename arch/arm/cpu/armv7/{tegra2 =3D>
> tegra20}/usb.c (99%) create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
> rename {board/st-ericsson =3D> arch/arm/cpu/armv7}/u8500/prcmu.c (58%)
> create mode 100644 arch/arm/cpu/tegra20-common/Makefile create mode
> 100644 arch/arm/cpu/tegra20-common/ap20.c rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/board.c (79%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/clock.c (99%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/crypto.c (100%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/crypto.h (100%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/emc.c (99%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/funcmux.c (99%) rename
> arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/lowlevel_init.S (100%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/pinmux.c (99%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/pmu.c (98%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/sys_info.c (98%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/timer.c (98%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/warmboot.c (95%)
> rename arch/arm/cpu/{armv7/tegra2 =3D> tegra20-common}/warmboot_avp.c
> (98%) rename arch/arm/cpu/{armv7/tegra2 =3D>
> tegra20-common}/warmboot_avp.h (100%) delete mode 100644
> arch/arm/include/asm/arch-am33xx/common_def.h create mode 100644
> arch/arm/include/asm/arch-am33xx/gpio.h create mode 100644
> arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/wdog.h rename
> drivers/usb/musb/da8xx.h =3D>
> arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%) create mode 100644
> arch/arm/include/asm/arch-exynos/dp.h create mode 100644
> arch/arm/include/asm/arch-exynos/dp_info.h create mode 100644
> arch/arm/include/asm/arch-exynos/pwm_backlight.h create mode 100644
> arch/arm/include/asm/arch-exynos/spl.h create mode 100644
> arch/arm/include/asm/arch-mx27/gpio.h create mode 100644
> arch/arm/include/asm/arch-mx27/regs-rtc.h create mode 100644
> arch/arm/include/asm/arch-mx5/iomux-mx51.h create mode 100644
> arch/arm/include/asm/arch-mx6/iomux.h rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/clock.h (100%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/dma.h (98%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/gpio.h (100%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/imx-regs.h (97%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/iomux-mx28.h (100%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/iomux.h (100%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-apbh.h (77%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-base.h (100%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-bch.h (92%)
> rename arch/arm/include/asm/{arch-mx28/regs-clkctrl.h =3D>
> arch-mxs/regs-clkctrl-mx28.h} (88%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-common.h (78%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-digctl.h
> (77%) rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-gpmi.h
> (95%) rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-i2c.h
> (94%) rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-lcdif.h
> (84%) rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-lradc.h
> (96%) rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-ocotp.h
> (71%) rename arch/arm/include/asm/{arch-mx28 =3D>
> arch-mxs}/regs-pinctrl.h (93%) rename arch/arm/include/asm/{arch-mx28
> =3D> arch-mxs}/regs-power.h (97%) rename arch/arm/include/asm/{arch-mx28
> =3D> arch-mxs}/regs-rtc.h (91%) rename arch/arm/include/asm/{arch-mx28
> =3D> arch-mxs}/regs-ssp.h (95%) rename arch/arm/include/asm/{arch-mx28
> =3D> arch-mxs}/regs-timrot.h (90%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-usb.h (99%) rename
> arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/regs-usbphy.h (94%)
> rename arch/arm/include/asm/{arch-mx28 =3D> arch-mxs}/sys_proto.h (78%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/ap20.h (98%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/apb_misc.h
> (100%) rename arch/arm/include/asm/{arch-tegra2 =3D>
> arch-tegra20}/board.h (100%) rename arch/arm/include/asm/{arch-tegra2
> =3D> arch-tegra20}/clk_rst.h (100%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/clock.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/emc.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/flow.h
> (100%) rename arch/arm/include/asm/{arch-tegra2 =3D>
> arch-tegra20}/funcmux.h (97%) rename arch/arm/include/asm/{arch-tegra2
> =3D> arch-tegra20}/fuse.h (100%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/gp_padctrl.h (98%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/gpio.h (99%)
> create mode 100644 arch/arm/include/asm/arch-tegra20/hardware.h rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/mmc.h (84%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/pinmux.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/pmc.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/pmu.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/scu.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D>
> arch-tegra20}/sdram_param.h (100%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/sys_proto.h (93%)
> rename arch/arm/include/asm/{arch-tegra2/tegra2.h =3D>
> arch-tegra20/tegra20.h} (87%) rename arch/arm/include/asm/{arch-tegra2
> =3D> arch-tegra20}/tegra_i2c.h (99%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/tegra_spi.h (96%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/timer.h
> (92%) rename arch/arm/include/asm/{arch-tegra2 =3D>
> arch-tegra20}/uart-spi-switch.h (100%) rename
> arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/uart.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/usb.h (100%)
> rename arch/arm/include/asm/{arch-tegra2 =3D> arch-tegra20}/warmboot.h
> (100%) create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> board/st-ericsson/u8500/prcmu-fw.h =3D>
> arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> arch/arm/include/asm/imx-common/boot_mode.h create mode 100644
> arch/arm/include/asm/imx-common/gpio.h create mode 100644
> board/atmel/at91sam9x5ek/Makefile create mode 100644
> board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644
> board/atmel/at91sam9x5ek/config.mk rename
> board/avionic-design/dts/{tegra2-medcom.dts =3D> tegra20-medcom.dts}
> (100%) rename board/avionic-design/dts/{tegra2-plutux.dts =3D>
> tegra20-plutux.dts} (100%) rename
> board/avionic-design/dts/{tegra2-tec.dts =3D> tegra20-tec.dts} (100%)
> create mode 100644 board/bluegiga/apx4devkit/Makefile create mode
> 100644 board/bluegiga/apx4devkit/apx4devkit.c create mode 100644
> board/bluegiga/apx4devkit/spl_boot.c rename
> board/compal/dts/{tegra2-paz00.dts =3D> tegra20-paz00.dts} (100%) rename
> board/compulab/dts/{tegra2-trimslice.dts =3D> tegra20-trimslice.dts}
> (100%) create mode 100644
> board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644
> board/efikamx/efikamx.c delete mode 100644
> board/freescale/mx28evk/u-boot.bd rename board/{efikamx =3D>
> genesi/mx51_efikamx}/Makefile (100%) rename board/{efikamx =3D>
> genesi/mx51_efikamx}/efikamx-usb.c (99%) create mode 100644
> board/genesi/mx51_efikamx/efikamx.c rename board/{efikamx =3D>
> genesi/mx51_efikamx}/imximage_mx.cfg (71%) rename board/{efikamx =3D>
> genesi/mx51_efikamx}/imximage_sb.cfg (80%) rename
> board/nvidia/dts/{tegra2-harmony.dts =3D> tegra20-harmony.dts} (92%)
> rename board/nvidia/dts/{tegra2-seaboard.dts =3D> tegra20-seaboard.dts}
> (100%) rename board/nvidia/dts/{tegra2-ventana.dts =3D>
> tegra20-ventana.dts} (92%) rename
> board/nvidia/dts/{tegra2-whistler.dts =3D> tegra20-whistler.dts} (94%)
> create mode 100644 board/raspberrypi/rpi_b/Makefile create mode 100644
> board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> board/samsung/smdk5250/clock_init.h create mode 100644
> board/samsung/smdk5250/dmc_common.c delete mode 100644
> board/samsung/smdk5250/dmc_init.c create mode 100644
> board/samsung/smdk5250/dmc_init_ddr3.c create mode 100644
> board/samsung/smdk5250/smdk5250-uboot-spl.lds create mode 100644
> board/samsung/smdk5250/smdk5250_spl.c rename
> board/{isee/igep0020/config.mk =3D> schulercontrol/sc_sps_1/Makefile}
> (57%) create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
> create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c create
> mode 100644 board/st-ericsson/snowball/Makefile create mode 100644
> board/st-ericsson/snowball/db8500_pins.h create mode 100644
> board/st-ericsson/snowball/snowball.c create mode 100644
> board/taskit/stamp9g20/Makefile create mode 100644
> board/taskit/stamp9g20/led.c create mode 100644
> board/taskit/stamp9g20/stamp9g20.c delete mode 100644
> board/ti/am335x/evm.c create mode 100644 doc/README.atmel_pmecc create
> mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644
> drivers/gpio/db8500_gpio.c rename
> arch/arm/cpu/armv7/omap-common/gpio.c =3D> drivers/gpio/omap_gpio.c
> (100%) create mode 100644 drivers/mmc/spl_mmc_load.c create mode
> 100644 drivers/net/cpsw.c create mode 100644 drivers/rtc/imxdi.c
> create mode 100644 drivers/rtc/mx27rtc.c create mode 100644
> drivers/usb/host/ohci-da8xx.c create mode 100644
> drivers/video/exynos_dp.c create mode 100644
> drivers/video/exynos_dp_lowlevel.c create mode 100644
> drivers/video/exynos_dp_lowlevel.h create mode 100644
> drivers/video/exynos_pwm_bl.c create mode 100644
> include/configs/apx4devkit.h create mode 100644
> include/configs/at91sam9x5ek.h rename include/configs/{efikamx.h =3D>
> mx51_efikamx.h} (96%) create mode 100644 include/configs/rpi_b.h
> create mode 100644 include/configs/sc_sps_1.h create mode 100644
> include/configs/snowball.h create mode 100644
> include/configs/stamp9g20.h rename
> include/configs/{tegra2-common-post.h =3D> tegra20-common-post.h} (74%)
> rename include/configs/{tegra2-common.h =3D> tegra20-common.h} (83%)
> create mode 100644 include/cpsw.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is wrong always, everywhere and for everyone to believe anything
upon insufficient evidence. - W. K. Clifford, British philosopher,
circa 1876
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-09-01 16:37 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit
27e301e5b7df6254c768d27130d3a36c31d55c96:
CREDITS: Add credits for MCF5249 initialization code (2012-09-01
14:50:09 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to df95321ca1b06a6271c3959b371848c10019e165:
at91: 9x5: Enable PMECC for 5series ek board. (2012-09-01 17:06:15
+0200)
----------------------------------------------------------------
Albert ARIBAUD (1):
Revert "arm: armv7: add compile option -mno-unaligned-access if
available"
Allen Martin (16):
tegra20: rename tegra2 -> tegra20
tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
tegra20: rename CONFIG_MACH_TEGRA_GENERIC
tegra20: tec: add tegra20-common-post.h
tegra20: make board mkdir commands unconditional
mkconfig: remove bashisms and cleanup config.mk generation
MAKEALL: update to work with new boards.cfg syntax
ARM: Fix arm720t SPL build
tegra20: remove timer_init from SPL build
ARM: add tegra20 support to arm720t
tegra20: add u-boot-*-tegra.bin targets
tegra20: move SDRAM param save to later in boot
tegra20: enable SPL for tegra20 boards
arm: enable libgcc build for SPL
spl: fix SPL build of private libgcc
tegra20: Remove armv4t build flags
Andreas Bie?mann (6):
doc/git-mailrc: update at91 and avr32
MAINTAINERS: fix entry of Ilko Iliev
MAINTAINERS: fix Andreas Bie?mann AVR32 entry
at91sam9263ek: fix 'update' script
at91sam9263ek: remove unnecessary console_init_f
arm:at91-boards: remove console_init_f where unnecessary
Ashok Kumar Reddy (2):
mx6qarm2:Use IMX_GPIO_NR macro
mx5:Use IMX_GPIO_NR macro
Beno?t Th?baudeau (20):
rtc: imxdi: Initial support
mxc_spi: Round up clock divider
mx25: Enable dcache
mx5: Enable dcache
mx35: Fix typo on EDIO
mx3: Fix typo on IPU_CONF_CSI_EN
mx5/6 timer: Round up tick_to_time() value
mx5: cosmetic: Clean up lowlevel_init
mx35: Remove duplicate GPIO3_BASE_ADDR
mx5/6: Fix cpu_mmc_init() return value
mx35: Add cpu_mmc_init()
mx5: Undeclare imx_decode_pll()
mx35 iomux: Remove unused macro
mx35: Fix broken pin definitions
mx35: Remove declaration of non-existing function
mx35: Move clock enums to clock.h
mx35: Remove declaration of non-existing function
mxc: Make gpio_get_value() use PSR
mxc: Define architecture identifier
fsl_esdhc: Remove cache snooping for i.MX
Bo Shen (8):
arm : Atmel : add at91sam9x5ek board support
ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT
arm : at91sam9x5 : fix a small bug for NAND
Take over the maintainer for sam9g10 and sam9m10g45
atmel: at91sam9x5: fix name error for spi
spi: atmel: add WDRBT bit to avoid receive overrun
arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
atmel: at91sam9x5: add spi flash boot support
Chandan Nath (3):
am33xx: CPSW init and definitions
am33xx: pin mux defintions for CPSW switch
am335x_evm: CPSW support
Cyril Chemparathy (1):
cpsw: add driver for cpsw ethernet device
Donghwa Lee (9):
video: support exynos fimd driver for various exynos series
EXYNOS5: support exynos5 lcd clock control
EXYNOS5: support display system register control
EXYNOS5: support display port phy control function
EXYNOS5: add display port base address
video: support exynos display port drivers
video: add dp_enabled variable in vidinfo structure
video: exynos fb driver supports display port feature
video: support exynos pwm backlight driver
Enric Balletb? i Serra (1):
OMAP3: fix DRAM size for IGEP-based boards.
Fabio Estevam (10):
mx28evk: Turn on caches
mx51evk: do not overwrite the console
vision2: do not overwrite the console
m28evk: Turn on caches
apx4devkit: Turn on caches
mx28evk: Remove unneeded 'undef'
mxs: Use correct function name to initialize dram
mx53loco: Use IMX_GPIO_NR macro
mx51evk: Use IMX_GPIO_NR macro
mx53ard: Use IMX_GPIO_NR macro
Heiko Schocher (1):
davinci: enbw_cmc: change switch init behaviour
Igor Grinberg (1):
arm: omap3: cm-t35: minor comment and printf change
Ilya Yanok (3):
omap24xx_i2c: add 2-byte address support
am335x_evm: read the on-board EEPROM
am335x_evm: enable SMSC PHY driver
Jaehoon Chung (1):
ARM: EXYNOS: fixed compiler warning message
Javier Martinez Canillas (5):
igep00x0: default to OMAP-specific serial driver
igep00x0: default mmcrootfstype to EXT4
OMAP3: igep00x0: Add config option to choose flash storage memory
OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
OMAP3: igep00x0: add SPL support for IGEP-based boards
Jeroen Hofstee (1):
arm: omap: Fix switching back to nandecc sw.
John Rigby (1):
u8500: Separating mmc config parameters from driver
Lad, Prabhakar (7):
da850/omap-l138: Add MMC support for DA850/OMAP-L138
arm, davinci: perform check for initializing global data and
serial init da850/omap-l138: Define SPI specific configs for SPL only
when SPI is used da850/omap-l138: Add support to read u-boot image from
MMC/SD da850/omap-l138: Fix NAND flash timings
da850/omap-l138: Add support for NAND SPL
da850/omap-l138: add support for direct NOR boot mode
Laurence Withers (4):
DaVinci DA8xx: tidy up clock ID definition
DaVinci DA850: UART2 clock ID comes from ASYNC3
DaVinci DA8xx: replace magic number for DDR speed
DaVinci DA8xx: fix set_cpu_clk_info()
Marek Vasut (18):
dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
dm: Move OMAP GPIO driver to drivers/gpio/
MX28: SPI: Refactor spi_xfer a bit
MX28: SPI: Pull out the PIO transfer function
MX28: SPI: Add DMA transfer support
MX28: Fix up the MMC driver DMA mode
MX28: Split out the PIO and DMA transfer functions
MX28: Transfer small blocks via PIO in MXS MMC
MX28: Fix MXS MMC DMA issues
MX28: Move the u-boot.bd info CPUDIR/SOCDIR
MX28: Add SchulerControl SC_SPS_1 platform
MX28: Drop the cp15 reconfiguration from SPL
MX28: Shuffle around the power management code
MX28: DMA: Align the struct mxs_dma_desc
MX28: DMA: Prolong the DMA timeout
MX28: SPI: Supercharge the SPI driver
MX28: m28evk: Align SSP clock speed
MX28: m28evk: Enable SPI DMA
Markus Hubig (2):
Enable the EMAC clock in at91_macb_hw_init().
at91: Add support for taskit AT91SAM9G20 boards.
Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU access
snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine
Matt Sealey (9):
spi: fix mxc_spi_slave structure allocation to clear memory
spi: fix mxs_spi_slave structure allocation to clear memory
mx5: add iomux-mx51.h include
efikamx: move and rename Efika MX directories and config files to
prepare for new boards efikamx: remove drive strength function and roll
its functionality into the DCD efikamx: configure Smarttop PCBID and
LED pads in DCD for convenience efikamx: update MAINTAINERS for Genesi
Efika MX systems efikamx: update to Efika MX Smarttop and Smartbook
boards efikamx: sync Smartbook DDR settings in DCD with those found in
Genesi's production U-Boot
Mikhail Kshevetskiy (3):
arm/davinci: fix DDR2/mDDR memory controller initialization for
Omap L138 arm/davinci/da850: add uart0 pinmux
serial/ns16550: ns16550 has a different register layout on
SOC_DA8XX
Otavio Salvador (19):
imx: Use a clear identification of an unidentified CPU type
MX28: extend print_cpuinfo() to use chip information
MX28: use a clear name for DDR2 initialization
mxs: reorganize source directory for easy sharing of code in
i.MXS SoCs mxs: prefix register acessor macros with 'mxs' prefix
mxs: prefix register structs with 'mxs' prefix
mxs: Reowork SPL to use 'mxs' prefix for methods
mxs: Clarify why we poweroff in case of brownout in 5v conflict
mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28
SoCs sc_sps_1: Adjust board config to use 'mxs' SoC code
mxs: Remove not required explicit iomux-mx28.h include
mxs: Remove not required include of iomux-mx28.h
mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
mxs: Convert sys_proto.h prefixes to 'mxs'
MX28: config: Allow different target generation in elftosb call
MX28: Move "regs-base.h" include after SoC type configuration
mxs: Replace i.MX233 by i.MX23 on copyright header
mxs: Only build internal Ethernet controller for i.MX28
mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Peter Meerwald (4):
beagle: make get_expansion_id(), get_board_revision(),
beagle_display_init() static beagle: fix termination of buddy env
setting beagle: removed unused pr_debug #define
beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Rajashekhara, Sudhakar (2):
da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
da850/omap-l138: Make MMC and NOR support mutually exclusive
Rajeshwari Shinde (10):
ARCH: SPL: Add parametric board initializer
SMDK5250: SPL: Define parametric board initializer
SMDK5250: Add smdk5250-uboot-spl.lds
EXYNOS5: CLOCK: define additional clock registers for Exynos5250
Rev 1.0 EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
EXYNOS5: CLOCK: Add BPLL support
EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
Rob Herring (1):
ARM: Remove unused stack and irq config defines
Satyanarayana, Sandhya (1):
am33xx evm: Update secure_emif_sdram_config during ddr init
Stathis Voukelatos (1):
i.MX28: bug fixes in PMU configuration code
Stefano Babic (7):
mcx: increased buffer for command line
OMAP3: mcx: set pinmux for uart4
OMAP3: mcx: updated default environment
OMAP3: mcx: read hot-water-button after reset
MX5: mx53loco: do not overwrite the console
MX: Set a common gpio.h for all i.MX
MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR
Stephen Warren (4):
README: fix references to config_cmd_default.h
ARM: arm1176: enable instruction cache in arch_cpu_init()
ARM: add basic support for the Broadcom BCM2835 SoC
ARM: add Raspberry Pi model B board, using BCM2835 SoC
Steve Sakoman (3):
omap: am335x_evm: remove unused definitions
omap: am33xx: enable gpio support
omap: am335x_evm: enable i2c1 channel
Sughosh Ganu (2):
hawkboard/omapl-138: Add support for generating ais image for
hawkboard da8xx/hawkboard: Add support for ohci host controller
Tetsuyuki Kobayashi (1):
arm: bugfix: save_boot_params_default accesses uninitalized stack
when -O0
Tom Rini (33):
am33xx: Enable gpio0 clock
am335x_evm: Update config for common usage
am33xx: Remove DMM_BASE define
am33xx: Convert to using <asm/emif.h> to describe the EMIF
am33xx: Remove extra check in enable_ddr_clocks
am33xx: Bugfix to config_sdram()
am33xx: Rework DDR2 EMIF initalization slightly
am33xx: Make config_cmd_ctrl / config_ddr_data take const structs
am33xx: Pass to config_ddr the type of memory that is connected
am33xx: Move the call to ddr_pll_config, make it take the
frequency am33xx: Clean up unused DDR defines, prefix more with 'DDR2'
am33xx: Document what we're doing with ddrctrl->ddrckectrl
am33xx: Turn a number of 'int' functions to 'void'
am33xx: Use emif_regs struct for storing initialization values
am33xx: Rework config_io_ctrl slightly
am33xx: Do not touch 'ratio1' fields
am33xx: Correct and clean up ddr_regs struct
am33xx: Move some variables in emif4.c, mark them static.
am33xx: Rework config_ddr to make DDR3 support easier.
am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support
am33xx: Remove board/ti/am335x/evm.c
am33xx: Add support for TI AM335x StarterKit EVM
am33xx evm: Add CONFIG_CMD_EEPROM and related
am33xx: Rework pinmux functions
doc/git-mailrc: Update 'ti' alias
am335x evm: Initial support for AM335x GP EVM Profiles
am33xx: Correct MMC1, remove MMC2 support
am335x evm: Enable MMC1 pinmux
am33xx: Add support, update omap3 McSPI driver
am335x evm: Enable support for spi0
omap4/5/am33xx: Make lowlevel_init available to all armv7
platforms armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible
stack davinci, c6x: Always use C version of reset code
Troy Kisky (4):
iomux: move IOMUX_GPR13_xxx defines
imx-common/cmd_bmode.c: add imx bmode (bootmode) command
mx6qsabrelite: add boot_mode support
mx53evk: add boot_mode support
Vaibhav Bedia (1):
am335x: ddr_defs: Update EMIF parameters
Veli-Pekka Peltola (1):
Add support for Bluegiga APX4 Development Kit
Vikram Narayanan (1):
tx25: Use generic gpio_* calls
Wu, Josh (5):
at91: atmel_nand: extract HWECC initialization code into one
function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused
variables. at91: atmel_nand: Update driver to support Programmable
Multibit ECC controller at91: 9x5: change SMC config timing that both
works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek
board.
Xu, Hong (1):
AT91: Small fix on AT91 USART initialization code
Zhong Hongbo (1):
arm/s5pxx: Fix get_timer_masked to get the time.
fabio.estevam at freescale.com (1):
mxs: Convert timeout parameter to 'unsigned int'
trem (3):
rtc: add support of mx27 rtc
gpio: add gpio api support to mx27 (v4)
imx27lite: update with gpio api change (v4)
?ukasz Majewski (3):
arm:trats: loaduimage environment variable defied for TRATS target
arm:exynos: Enable data cache at exynos based processors.
arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS
Samsung board
.gitignore | 3 +
MAINTAINERS | 63 +-
MAKEALL | 9 +-
Makefile | 36 +-
README | 4 +-
arch/arm/cpu/arm1136/mx35/generic.c | 19 +-
arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
arch/arm/cpu/arm1176/bcm2835/Makefile | 37 +
arch/arm/cpu/arm1176/bcm2835/config.mk | 19 +
arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 +
arch/arm/cpu/arm1176/bcm2835/reset.c | 35 +
arch/arm/cpu/arm1176/bcm2835/timer.c | 55 +
arch/arm/cpu/arm1176/cpu.c | 7 +
arch/arm/cpu/arm720t/cpu.c | 2 +
arch/arm/cpu/arm720t/interrupts.c | 5 +
arch/arm/cpu/arm720t/start.S | 25 +-
arch/arm/cpu/arm720t/tegra20/Makefile | 48 +
arch/arm/cpu/arm720t/tegra20/board.h | 25 +
.../arm/cpu/arm720t/tegra20}/config.mk | 17 +-
.../{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} | 148 +--
arch/arm/cpu/arm720t/tegra20/cpu.h | 100 ++
arch/arm/cpu/arm720t/tegra20/spl.c | 133 ++
arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 +
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232 ++++
arch/arm/cpu/arm926ejs/at91/clock.c | 12 +-
arch/arm/cpu/arm926ejs/davinci/Makefile | 4 +-
arch/arm/cpu/arm926ejs/davinci/cpu.c | 22 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 16 +
arch/arm/cpu/arm926ejs/davinci/psc.c | 5 +
arch/arm/cpu/arm926ejs/davinci/reset.S | 81 --
arch/arm/cpu/arm926ejs/davinci/reset.c | 33 +
arch/arm/cpu/arm926ejs/davinci/spl.c | 20 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 108 +-
.../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 27 +-
.../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 65 +-
.../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 279 ++---
arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 42 -
arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 10 +-
.../arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 0
.../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
arch/arm/cpu/armv7/Makefile | 6 +-
arch/arm/cpu/armv7/am33xx/board.c | 212 +++-
arch/arm/cpu/armv7/am33xx/clock.c | 47 +-
arch/arm/cpu/armv7/am33xx/ddr.c | 90 +-
arch/arm/cpu/armv7/am33xx/emif4.c | 240 ++--
arch/arm/cpu/armv7/config.mk | 2 -
arch/arm/cpu/armv7/cpu.c | 13 +-
arch/arm/cpu/armv7/exynos/clock.c | 139 ++-
arch/arm/cpu/armv7/exynos/pinmux.c | 22 +-
arch/arm/cpu/armv7/exynos/power.c | 21 +
arch/arm/cpu/armv7/exynos/soc.c | 8 +
arch/arm/cpu/armv7/exynos/system.c | 18 +
arch/arm/cpu/armv7/imx-common/Makefile | 1 +
arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 ++
arch/arm/cpu/armv7/imx-common/cpu.c | 10 +-
arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
arch/arm/cpu/armv7/lowlevel_init.S | 51 +
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +-
arch/arm/cpu/armv7/mx5/soc.c | 39 +
arch/arm/cpu/armv7/mx6/soc.c | 36 +
arch/arm/cpu/armv7/omap-common/Makefile | 3 -
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 18 -
arch/arm/cpu/armv7/s5p-common/pwm.c | 2 +-
arch/arm/cpu/armv7/s5p-common/timer.c | 20 +-
arch/arm/cpu/armv7/start.S | 20 +-
arch/arm/cpu/armv7/{tegra2 => tegra20}/Makefile | 15 +-
.../cpu/armv7/{tegra2 => tegra20}/cmd_enterrcm.c | 4 +-
arch/arm/cpu/armv7/{tegra2 => tegra20}/config.mk | 12 -
arch/arm/cpu/armv7/{tegra2 => tegra20}/usb.c | 2 +-
arch/arm/cpu/armv7/u8500/Makefile | 2 +-
arch/arm/cpu/armv7/u8500/clock.c | 34 +
arch/arm/cpu/armv7/u8500/cpu.c | 192 +++
.../arm/cpu/armv7}/u8500/prcmu.c | 128 +-
arch/arm/cpu/tegra20-common/Makefile | 55 +
arch/arm/cpu/tegra20-common/ap20.c | 131 ++
.../cpu/{armv7/tegra2 => tegra20-common}/board.c | 39 +-
.../cpu/{armv7/tegra2 => tegra20-common}/clock.c | 10 +-
.../cpu/{armv7/tegra2 => tegra20-common}/crypto.c | 0
.../cpu/{armv7/tegra2 => tegra20-common}/crypto.h | 0
.../arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c | 2 +-
.../cpu/{armv7/tegra2 => tegra20-common}/funcmux.c | 2 +-
.../tegra2 => tegra20-common}/lowlevel_init.S | 0
.../cpu/{armv7/tegra2 => tegra20-common}/pinmux.c | 4 +-
.../arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c | 2 +-
.../{armv7/tegra2 => tegra20-common}/sys_info.c | 2 +-
.../cpu/{armv7/tegra2 => tegra20-common}/timer.c | 2 +-
.../{armv7/tegra2 => tegra20-common}/warmboot.c | 18 +-
.../tegra2 => tegra20-common}/warmboot_avp.c | 4 +-
.../tegra2 => tegra20-common}/warmboot_avp.h | 0
arch/arm/include/asm/arch-am33xx/common_def.h | 23 -
arch/arm/include/asm/arch-am33xx/cpu.h | 33 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 184 +--
arch/arm/include/asm/arch-am33xx/gpio.h | 29 +
arch/arm/include/asm/arch-am33xx/hardware.h | 9 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 +-
arch/arm/include/asm/arch-am33xx/omap.h | 1 -
arch/arm/include/asm/arch-am33xx/sys_proto.h | 30 +
arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +
arch/arm/include/asm/arch-at91/at91sam9x5.h | 170 +++
arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 91 ++
arch/arm/include/asm/arch-at91/hardware.h | 2 +
arch/arm/include/asm/arch-bcm2835/gpio.h | 66 +
arch/arm/include/asm/arch-bcm2835/timer.h | 37 +
arch/arm/include/asm/arch-bcm2835/wdog.h | 36 +
.../arm/include/asm/arch-davinci/da8xx-usb.h | 7 +-
arch/arm/include/asm/arch-davinci/hardware.h | 60 +-
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 4 +
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/clock.h | 237 ++--
arch/arm/include/asm/arch-exynos/cpu.h | 3 +
arch/arm/include/asm/arch-exynos/dmc.h | 65 +
arch/arm/include/asm/arch-exynos/dp.h | 751 ++++++++++++
arch/arm/include/asm/arch-exynos/dp_info.h | 214 ++++
arch/arm/include/asm/arch-exynos/fb.h | 27 +-
arch/arm/include/asm/arch-exynos/gpio.h | 7 +-
arch/arm/include/asm/arch-exynos/power.h | 5 +
arch/arm/include/asm/arch-exynos/pwm_backlight.h | 34 +
arch/arm/include/asm/arch-exynos/spl.h | 97 ++
arch/arm/include/asm/arch-imx/imx-regs.h | 3 +
arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx27/gpio.h | 55 +
arch/arm/include/asm/arch-mx27/imx-regs.h | 35 +-
arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +
arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 4 +-
arch/arm/include/asm/arch-mx35/clock.h | 28 +-
arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
arch/arm/include/asm/arch-mx35/imx-regs.h | 31 +-
arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
arch/arm/include/asm/arch-mx5/clock.h | 2 -
arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 20 +
arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164 +++
arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 25 +-
arch/arm/include/asm/arch-mx6/iomux.h | 129 ++
.../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 3 +-
.../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 2 +-
.../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
.../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 +-
.../regs-clkctrl-mx28.h} | 60 +-
.../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +-
.../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 +-
.../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +-
.../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 +-
.../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 +-
.../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +-
.../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170 +--
.../asm/{arch-mx28 => arch-mxs}/regs-power.h | 30 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +-
.../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
.../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
.../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 28 +-
arch/arm/include/asm/arch-omap3/mem.h | 29 +
arch/arm/include/asm/arch-omap4/omap.h | 1 -
arch/arm/include/asm/arch-omap5/omap.h | 2 -
.../asm/{arch-tegra2 => arch-tegra20}/ap20.h | 4 +-
.../asm/{arch-tegra2 => arch-tegra20}/apb_misc.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/board.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/clk_rst.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/clock.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/emc.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/flow.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/funcmux.h | 2 +-
.../asm/{arch-tegra2 => arch-tegra20}/fuse.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h | 2 +-
.../asm/{arch-tegra2 => arch-tegra20}/gpio.h | 2 +-
arch/arm/include/asm/arch-tegra20/hardware.h | 29 +
.../asm/{arch-tegra2 => arch-tegra20}/mmc.h | 8 +-
.../asm/{arch-tegra2 => arch-tegra20}/pinmux.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/pmc.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/pmu.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/scu.h | 0
.../{arch-tegra2 => arch-tegra20}/sdram_param.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/sys_proto.h | 4 +-
.../tegra2.h => arch-tegra20/tegra20.h} | 18 +-
.../asm/{arch-tegra2 => arch-tegra20}/tegra_i2c.h | 2 +-
.../asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h | 4 +-
.../asm/{arch-tegra2 => arch-tegra20}/timer.h | 6 +-
.../uart-spi-switch.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/uart.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/usb.h | 0
.../asm/{arch-tegra2 => arch-tegra20}/warmboot.h | 0
arch/arm/include/asm/arch-u8500/clock.h | 5 +-
arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 +
arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++
arch/arm/include/asm/arch-u8500/hardware.h | 33 +-
.../arm/include/asm/arch-u8500/prcmu.h | 35 +-
arch/arm/include/asm/arch-u8500/sys_proto.h | 1 +
arch/arm/include/asm/emif.h | 8 +-
arch/arm/include/asm/imx-common/boot_mode.h | 36 +
arch/arm/include/asm/imx-common/gpio.h | 39 +
arch/arm/include/asm/imx-common/iomux-v3.h | 111 --
arch/arm/include/asm/omap_common.h | 2 +-
arch/arm/lib/Makefile | 2 +-
board/BuS/eb_cpux9k2/cpux9k2.c | 2 -
board/BuS/vl_ma2sc/vl_ma2sc.c | 3 -
board/CarMediaLab/flea3/flea3.c | 6 +-
board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 3 -
board/atmel/at91sam9263ek/at91sam9263ek.c | 3 -
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 -
board/atmel/at91sam9rlek/at91sam9rlek.c | 3 -
board/atmel/at91sam9x5ek/Makefile | 52 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 295 +++++
board/atmel/at91sam9x5ek/config.mk | 1 +
board/avionic-design/common/tamonten.c | 4 +-
.../dts/{tegra2-medcom.dts => tegra20-medcom.dts} | 0
.../dts/{tegra2-plutux.dts => tegra20-plutux.dts} | 0
.../dts/{tegra2-tec.dts => tegra20-tec.dts} | 0
board/avionic-design/medcom/Makefile | 2 -
board/avionic-design/plutux/Makefile | 2 -
board/avionic-design/tec/Makefile | 2 -
board/bluegiga/apx4devkit/Makefile | 47 +
board/bluegiga/apx4devkit/apx4devkit.c | 150 +++
board/bluegiga/apx4devkit/spl_boot.c | 164 +++
board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 -
board/calao/tny_a9260/tny_a9260.c | 3 -
board/cm_t35/cm_t35.c | 4 +-
.../dts/{tegra2-paz00.dts => tegra20-paz00.dts} | 0
board/compal/paz00/Makefile | 2 -
board/compal/paz00/paz00.c | 6 +-
...{tegra2-trimslice.dts => tegra20-trimslice.dts} | 0
board/compulab/trimslice/Makefile | 2 -
board/compulab/trimslice/trimslice.c | 6 +-
board/davinci/da8xxevm/da850evm.c | 54 +-
board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
board/davinci/da8xxevm/hawkboard.c | 41 +
board/denx/m28evk/m28evk.c | 10 +-
board/denx/m28evk/spl_boot.c | 2 +-
board/efikamx/efikamx.c | 735 -----------
board/enbw/enbw_cmc/enbw_cmc.c | 102 +-
board/esg/ima3-mx53/ima3-mx53.c | 2 +-
board/eukrea/cpuat91/cpuat91.c | 2 -
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 6 +-
board/freescale/mx28evk/u-boot.bd | 14 -
board/freescale/mx35pdk/mx35pdk.c | 2 +-
board/freescale/mx51evk/mx51evk.c | 32 +-
board/freescale/mx53ard/mx53ard.c | 14 +-
board/freescale/mx53evk/mx53evk.c | 25 +-
board/freescale/mx53loco/mx53loco.c | 26 +-
board/freescale/mx53smd/mx53smd.c | 6 +-
board/freescale/mx6qarm2/mx6qarm2.c | 8 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 47 +-
board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
.../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
board/genesi/mx51_efikamx/efikamx.c | 512 ++++++++
.../mx51_efikamx}/imximage_mx.cfg | 50 +-
.../mx51_efikamx}/imximage_sb.cfg | 44 +-
board/htkw/mcx/mcx.c | 23 +
board/htkw/mcx/mcx.h | 11 +-
board/isee/igep0020/igep0020.c | 42 +-
board/isee/igep0020/igep0020.h | 4 +
board/isee/igep0030/igep0030.c | 42 +-
board/isee/igep0030/igep0030.h | 4 +
board/karo/tx25/tx25.c | 25 +-
board/logicpd/imx27lite/imx27lite.c | 5 +-
board/nvidia/common/board.c | 17 +-
board/nvidia/common/emc.c | 2 +-
board/nvidia/common/uart-spi-switch.c | 2 +-
.../{tegra2-harmony.dts => tegra20-harmony.dts} | 2 +-
.../{tegra2-seaboard.dts => tegra20-seaboard.dts} | 0
.../{tegra2-ventana.dts => tegra20-ventana.dts} | 2 +-
.../{tegra2-whistler.dts => tegra20-whistler.dts} | 2 +-
board/nvidia/harmony/harmony.c | 6 +-
board/nvidia/seaboard/seaboard.c | 6 +-
board/nvidia/whistler/whistler.c | 6 +-
board/raspberrypi/rpi_b/Makefile | 34 +
board/raspberrypi/rpi_b/rpi_b.c | 34 +
board/samsung/smdk5250/Makefile | 3 +-
board/samsung/smdk5250/clock_init.c | 714 +++++++++--
board/samsung/smdk5250/clock_init.h | 149 +++
board/samsung/smdk5250/dmc_common.c | 199 +++
board/samsung/smdk5250/dmc_init.c | 462 -------
board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++
board/samsung/smdk5250/setup.h | 763 +++++++-----
board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +
board/samsung/smdk5250/smdk5250.c | 6 +-
board/samsung/smdk5250/smdk5250_spl.c | 68 ++
.../config.mk => schulercontrol/sc_sps_1/Makefile} | 40 +-
board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++
board/schulercontrol/sc_sps_1/spl_boot.c | 165 +++
board/st-ericsson/snowball/Makefile | 49 +
board/st-ericsson/snowball/db8500_pins.h | 745 +++++++++++
board/st-ericsson/snowball/snowball.c | 348 ++++++
board/st-ericsson/u8500/Makefile | 2 +-
board/st-ericsson/u8500/u8500_href.c | 100 +-
board/syteco/zmx25/zmx25.c | 26 +-
board/taskit/stamp9g20/Makefile | 53 +
board/taskit/stamp9g20/led.c | 138 +++
board/taskit/stamp9g20/stamp9g20.c | 191 +++
board/ti/am335x/Makefile | 4 +-
board/ti/am335x/evm.c | 44 -
board/ti/am335x/mux.c | 163 ++-
board/ti/beagle/beagle.c | 12 +-
board/ttcontrol/vision2/vision2.c | 13 +-
boards.cfg | 41 +-
doc/README.atmel_pmecc | 44 +
doc/README.m28 | 4 +-
doc/README.mx28evk | 4 +-
doc/git-mailrc | 7 +-
drivers/dma/apbh_dma.c | 38 +-
drivers/gpio/Makefile | 3 +
drivers/gpio/bcm2835_gpio.c | 89 ++
drivers/gpio/db8500_gpio.c | 221 ++++
drivers/gpio/mxc_gpio.c | 10 +-
drivers/gpio/mxs_gpio.c | 16 +-
.../omap-common/gpio.c => drivers/gpio/omap_gpio.c | 0
drivers/gpio/tegra_gpio.c | 12 +-
drivers/i2c/mxs_i2c.c | 14 +-
drivers/i2c/omap24xx_i2c.c | 58 +-
drivers/i2c/tegra_i2c.c | 12 +-
drivers/input/Makefile | 2 +-
drivers/mmc/Makefile | 4 +
drivers/mmc/arm_pl180_mmci.c | 131 +-
drivers/mmc/arm_pl180_mmci.h | 27 +-
drivers/mmc/fsl_esdhc.c | 5 +-
drivers/mmc/mxsmmc.c | 204 ++--
drivers/mmc/spl_mmc_load.c | 62 +
drivers/mmc/tegra_mmc.c | 32 +-
drivers/mmc/tegra_mmc.h | 12 +-
drivers/mtd/nand/atmel_nand.c | 827 ++++++++++++-
drivers/mtd/nand/atmel_nand_ecc.h | 113 ++
drivers/mtd/nand/mxs_nand.c | 18 +-
drivers/mtd/nand/omap_gpmc.c | 1 +
drivers/net/Makefile | 1 +
drivers/net/cpsw.c | 991
+++++++++++++++ drivers/net/macb.c
| 4 +- drivers/rtc/Makefile | 2 +
drivers/rtc/imxdi.c | 244 ++++
drivers/rtc/mx27rtc.c | 83 ++
drivers/rtc/mxsrtc.c | 10 +-
drivers/serial/atmel_usart.c | 11 +-
drivers/serial/ns16550.c | 2 +-
drivers/serial/serial_pl01x.c | 2 +
drivers/spi/atmel_spi.c | 3 +
drivers/spi/atmel_spi.h | 1 +
drivers/spi/mxc_spi.c | 6 +-
drivers/spi/mxs_spi.c | 244 +++-
drivers/spi/omap3_spi.c | 16 +
drivers/spi/omap3_spi.h | 5 +
drivers/spi/tegra_spi.c | 10 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mxs.c | 26 +-
drivers/usb/host/ohci-da8xx.c | 48 +
drivers/usb/musb/da8xx.c | 3 +-
drivers/video/Makefile | 2 +
drivers/video/exynos_dp.c | 925
++++++++++++++ drivers/video/exynos_dp_lowlevel.c |
1291 ++++++++++++++++++++
drivers/video/exynos_dp_lowlevel.h | 80 ++
drivers/video/exynos_fb.c | 5 +-
drivers/video/exynos_fimd.c | 91 +-
drivers/video/exynos_pwm_bl.c | 57 +
include/configs/SX1.h | 13 -
include/configs/VCMA9.h | 12 -
include/configs/a320evb.h | 13 -
include/configs/actux1.h | 6 -
include/configs/actux2.h | 6 -
include/configs/actux3.h | 7 -
include/configs/actux4.h | 6 -
include/configs/adp-ag101.h | 7 -
include/configs/adp-ag101p.h | 7 -
include/configs/adp-ag102.h | 7 -
include/configs/afeb9260.h | 5 -
include/configs/am335x_evm.h | 114 +-
include/configs/am3517_crane.h | 8 -
include/configs/am3517_evm.h | 8 -
include/configs/apollon.h | 8 -
include/configs/apx4devkit.h | 236 ++++
include/configs/at91rm9200ek.h | 3 -
include/configs/at91sam9260ek.h | 7 -
include/configs/at91sam9261ek.h | 9 -
include/configs/at91sam9263ek.h | 7 +-
include/configs/at91sam9m10g45ek.h | 8 -
include/configs/at91sam9rlek.h | 5 -
include/configs/at91sam9x5ek.h | 200 +++
include/configs/balloon3.h | 9 -
include/configs/ca9x4_ct_vxp.h | 7 -
include/configs/calimain.h | 1 -
include/configs/cam_enc_4xx.h | 2 -
include/configs/cm4008.h | 13 -
include/configs/cm41xx.h | 13 -
include/configs/cm_t35.h | 9 +-
include/configs/colibri_pxa270.h | 11 -
include/configs/cpu9260.h | 7 -
include/configs/cpuat91.h | 10 -
include/configs/da830evm.h | 2 -
include/configs/da850evm.h | 94 +-
include/configs/davinci_dm355evm.h | 2 -
include/configs/davinci_dm355leopard.h | 2 -
include/configs/davinci_dm365evm.h | 2 -
include/configs/davinci_dm6467evm.h | 2 -
include/configs/davinci_dvevm.h | 2 -
include/configs/davinci_schmoogie.h | 2 -
include/configs/davinci_sffsdr.h | 2 -
include/configs/davinci_sonata.h | 2 -
include/configs/devkit3250.h | 1 -
include/configs/devkit8000.h | 7 +-
include/configs/dig297.h | 13 +-
include/configs/dvlhost.h | 7 -
include/configs/ea20.h | 1 -
include/configs/eb_cpux9k2.h | 2 -
include/configs/edminiv2.h | 1 -
include/configs/enbw_cmc.h | 1 -
include/configs/ethernut5.h | 5 +-
include/configs/flea3.h | 8 -
include/configs/harmony.h | 14 +-
include/configs/hawkboard.h | 16 +-
include/configs/highbank.h | 11 -
include/configs/igep00x0.h | 96 +-
include/configs/ima3-mx53.h | 3 -
include/configs/imx27lite-common.h | 6 +-
include/configs/imx31_litekit.h | 7 -
include/configs/imx31_phycore.h | 7 -
include/configs/integratorap.h | 11 -
include/configs/integratorcp.h | 11 -
include/configs/jadecpu.h | 7 -
include/configs/jornada.h | 7 -
include/configs/km/km_arm.h | 1 -
include/configs/lubbock.h | 12 -
include/configs/m28evk.h | 16 +-
include/configs/mcx.h | 140 ++-
include/configs/medcom.h | 12 +-
include/configs/meesc.h | 7 -
include/configs/mv-common.h | 1 -
include/configs/mx1ads.h | 12 -
include/configs/mx25pdk.h | 3 -
include/configs/mx28evk.h | 13 +-
include/configs/mx31ads.h | 7 -
include/configs/mx31pdk.h | 7 -
include/configs/mx35pdk.h | 8 -
include/configs/{efikamx.h => mx51_efikamx.h} | 7 -
include/configs/mx51evk.h | 9 +-
include/configs/mx53ard.h | 3 -
include/configs/mx53evk.h | 6 +-
include/configs/mx53loco.h | 5 +-
include/configs/mx53smd.h | 3 -
include/configs/mx6qarm2.h | 1 -
include/configs/mx6qsabrelite.h | 7 +-
include/configs/nhk8815.h | 6 -
include/configs/ns9750dev.h | 4 -
include/configs/omap1510inn.h | 13 -
include/configs/omap2420h4.h | 12 -
include/configs/omap3_beagle.h | 12 +-
include/configs/omap3_evm_common.h | 9 +-
include/configs/omap3_logic.h | 10 +-
include/configs/omap3_mvblx.h | 9 +-
include/configs/omap3_overo.h | 10 +-
include/configs/omap3_pandora.h | 9 +-
include/configs/omap3_sdp3430.h | 8 -
include/configs/omap3_zoom1.h | 8 -
include/configs/omap3_zoom2.h | 9 +-
include/configs/omap4_common.h | 21 +-
include/configs/omap5912osk.h | 13 -
include/configs/omap5_evm.h | 20 +-
include/configs/omap730p2.h | 14 -
include/configs/origen.h | 8 -
include/configs/otc570.h | 7 -
include/configs/palmld.h | 9 -
include/configs/palmtc.h | 9 -
include/configs/paz00.h | 12 +-
include/configs/pdnb3.h | 11 -
include/configs/plutux.h | 12 +-
include/configs/pm9261.h | 7 -
include/configs/pm9263.h | 7 -
include/configs/pm9g45.h | 6 -
include/configs/pxa255_idp.h | 13 -
include/configs/qong.h | 6 -
include/configs/rpi_b.h | 104 ++
include/configs/s5p_goni.h | 3 -
include/configs/s5pc210_universal.h | 3 -
include/configs/sbc35_a9g20.h | 6 -
include/configs/sc_sps_1.h | 208 ++++
include/configs/scb9328.h | 8 -
include/configs/seaboard.h | 20 +-
include/configs/smdk2410.h | 13 -
include/configs/smdk5250.h | 10 +-
include/configs/smdk6400.h | 7 -
include/configs/smdkc100.h | 7 -
include/configs/smdkv310.h | 8 -
include/configs/snapper9260.h | 2 -
include/configs/snowball.h | 266 ++++
include/configs/spear-common.h | 8 -
include/configs/stamp9g20.h | 266 ++++
include/configs/tam3517-common.h | 9 +-
include/configs/tec.h | 12
+- ...{tegra2-common-post.h => tegra20-common-post.h} | 73
+- .../configs/{tegra2-common.h => tegra20-common.h} | 50 +-
include/configs/tnetv107x_evm.h | 1 -
include/configs/tny_a9260.h | 7 -
include/configs/top9000.h | 5 -
include/configs/trats.h | 10 +-
include/configs/tricorder.h | 4 -
include/configs/trimslice.h | 14 +-
include/configs/trizepsiv.h | 13 -
include/configs/tt01.h | 3 -
include/configs/tx25.h | 1 -
include/configs/u8500_href.h | 10 -
include/configs/vct.h | 1 -
include/configs/ventana.h | 12 +-
include/configs/versatile.h | 11 -
include/configs/vision2.h | 7 +-
include/configs/vl_ma2sc.h | 9 -
include/configs/vpac270.h | 8 -
include/configs/whistler.h | 14 +-
include/configs/xaeniax.h | 15 -
include/configs/zipitz2.h | 10 -
include/configs/zmx25.h | 1 -
include/cpsw.h | 51 +
include/fdtdec.h | 12 +-
include/fsl_esdhc.h | 1 -
include/lcd.h | 1 +
include/mmc.h | 2 +
include/nand.h | 2 +-
include/ns16550.h | 9 +
include/serial.h | 2 +-
mkconfig | 38 +-
spl/Makefile | 10 + 539 files
changed, 19426 insertions(+), 5730 deletions(-) create mode 100644
arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
arch/arm/cpu/arm720t/tegra20/Makefile create mode 100644
arch/arm/cpu/arm720t/tegra20/board.h rename {board/isee/igep0030 =>
arch/arm/cpu/arm720t/tegra20}/config.mk (66%) rename
arch/arm/cpu/{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} (63%)
create mode 100644 arch/arm/cpu/arm720t/tegra20/cpu.h create mode
100644 arch/arm/cpu/arm720t/tegra20/spl.c create mode 100644
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c delete mode 100644
arch/arm/cpu/arm926ejs/davinci/reset.S create mode 100644
arch/arm/cpu/arm926ejs/davinci/reset.c rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%) rename
arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (69%) rename
arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (85%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (82%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (93%) rename
board/denx/m28evk/u-boot.bd =>
arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd (100%) rename
arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%) create mode
100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c create mode 100644
arch/arm/cpu/armv7/lowlevel_init.S rename arch/arm/cpu/armv7/{tegra2
=> tegra20}/Makefile (69%) rename arch/arm/cpu/armv7/{tegra2 =>
tegra20}/cmd_enterrcm.c (94%) rename arch/arm/cpu/armv7/{tegra2 =>
tegra20}/config.mk (74%) rename arch/arm/cpu/armv7/{tegra2 =>
tegra20}/usb.c (99%) create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%)
create mode 100644 arch/arm/cpu/tegra20-common/Makefile create mode
100644 arch/arm/cpu/tegra20-common/ap20.c rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/board.c (79%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/clock.c (99%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.c (100%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.h (100%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c (99%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/funcmux.c (99%) rename
arch/arm/cpu/{armv7/tegra2 => tegra20-common}/lowlevel_init.S (100%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pinmux.c (99%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c (98%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/sys_info.c (98%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/timer.c (98%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot.c (95%)
rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot_avp.c
(98%) rename arch/arm/cpu/{armv7/tegra2 =>
tegra20-common}/warmboot_avp.h (100%) delete mode 100644
arch/arm/include/asm/arch-am33xx/common_def.h create mode 100644
arch/arm/include/asm/arch-am33xx/gpio.h create mode 100644
arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644
arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644
arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
arch/arm/include/asm/arch-bcm2835/wdog.h rename
drivers/usb/musb/da8xx.h =>
arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%) create mode 100644
arch/arm/include/asm/arch-exynos/dp.h create mode 100644
arch/arm/include/asm/arch-exynos/dp_info.h create mode 100644
arch/arm/include/asm/arch-exynos/pwm_backlight.h create mode 100644
arch/arm/include/asm/arch-exynos/spl.h create mode 100644
arch/arm/include/asm/arch-mx27/gpio.h create mode 100644
arch/arm/include/asm/arch-mx27/regs-rtc.h create mode 100644
arch/arm/include/asm/arch-mx5/iomux-mx51.h create mode 100644
arch/arm/include/asm/arch-mx6/iomux.h rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (98%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (97%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%)
rename arch/arm/include/asm/{arch-mx28/regs-clkctrl.h =>
arch-mxs/regs-clkctrl-mx28.h} (88%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h
(77%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h
(95%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h
(94%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h
(84%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h
(96%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h
(71%) rename arch/arm/include/asm/{arch-mx28 =>
arch-mxs}/regs-pinctrl.h (93%) rename arch/arm/include/asm/{arch-mx28
=> arch-mxs}/regs-power.h (97%) rename arch/arm/include/asm/{arch-mx28
=> arch-mxs}/regs-rtc.h (91%) rename arch/arm/include/asm/{arch-mx28
=> arch-mxs}/regs-ssp.h (95%) rename arch/arm/include/asm/{arch-mx28
=> arch-mxs}/regs-timrot.h (90%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%) rename
arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (78%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/ap20.h (98%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/apb_misc.h
(100%) rename arch/arm/include/asm/{arch-tegra2 =>
arch-tegra20}/board.h (100%) rename arch/arm/include/asm/{arch-tegra2
=> arch-tegra20}/clk_rst.h (100%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/clock.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/emc.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/flow.h
(100%) rename arch/arm/include/asm/{arch-tegra2 =>
arch-tegra20}/funcmux.h (97%) rename arch/arm/include/asm/{arch-tegra2
=> arch-tegra20}/fuse.h (100%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h (98%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gpio.h (99%)
create mode 100644 arch/arm/include/asm/arch-tegra20/hardware.h rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/mmc.h (84%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pinmux.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmc.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmu.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/scu.h (100%)
rename arch/arm/include/asm/{arch-tegra2 =>
arch-tegra20}/sdram_param.h (100%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/sys_proto.h (93%)
rename arch/arm/include/asm/{arch-tegra2/tegra2.h =>
arch-tegra20/tegra20.h} (87%) rename arch/arm/include/asm/{arch-tegra2
=> arch-tegra20}/tegra_i2c.h (99%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h (96%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/timer.h
(92%) rename arch/arm/include/asm/{arch-tegra2 =>
arch-tegra20}/uart-spi-switch.h (100%) rename
arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/uart.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/usb.h (100%)
rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/warmboot.h
(100%) create mode 100644
arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
board/st-ericsson/u8500/prcmu-fw.h =>
arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
arch/arm/include/asm/imx-common/boot_mode.h create mode 100644
arch/arm/include/asm/imx-common/gpio.h create mode 100644
board/atmel/at91sam9x5ek/Makefile create mode 100644
board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644
board/atmel/at91sam9x5ek/config.mk rename
board/avionic-design/dts/{tegra2-medcom.dts => tegra20-medcom.dts}
(100%) rename board/avionic-design/dts/{tegra2-plutux.dts =>
tegra20-plutux.dts} (100%) rename
board/avionic-design/dts/{tegra2-tec.dts => tegra20-tec.dts} (100%)
create mode 100644 board/bluegiga/apx4devkit/Makefile create mode
100644 board/bluegiga/apx4devkit/apx4devkit.c create mode 100644
board/bluegiga/apx4devkit/spl_boot.c rename
board/compal/dts/{tegra2-paz00.dts => tegra20-paz00.dts} (100%) rename
board/compulab/dts/{tegra2-trimslice.dts => tegra20-trimslice.dts}
(100%) create mode 100644
board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644
board/efikamx/efikamx.c delete mode 100644
board/freescale/mx28evk/u-boot.bd rename board/{efikamx =>
genesi/mx51_efikamx}/Makefile (100%) rename board/{efikamx =>
genesi/mx51_efikamx}/efikamx-usb.c (99%) create mode 100644
board/genesi/mx51_efikamx/efikamx.c rename board/{efikamx =>
genesi/mx51_efikamx}/imximage_mx.cfg (71%) rename board/{efikamx =>
genesi/mx51_efikamx}/imximage_sb.cfg (80%) rename
board/nvidia/dts/{tegra2-harmony.dts => tegra20-harmony.dts} (92%)
rename board/nvidia/dts/{tegra2-seaboard.dts => tegra20-seaboard.dts}
(100%) rename board/nvidia/dts/{tegra2-ventana.dts =>
tegra20-ventana.dts} (92%) rename
board/nvidia/dts/{tegra2-whistler.dts => tegra20-whistler.dts} (94%)
create mode 100644 board/raspberrypi/rpi_b/Makefile create mode 100644
board/raspberrypi/rpi_b/rpi_b.c create mode 100644
board/samsung/smdk5250/clock_init.h create mode 100644
board/samsung/smdk5250/dmc_common.c delete mode 100644
board/samsung/smdk5250/dmc_init.c create mode 100644
board/samsung/smdk5250/dmc_init_ddr3.c create mode 100644
board/samsung/smdk5250/smdk5250-uboot-spl.lds create mode 100644
board/samsung/smdk5250/smdk5250_spl.c rename
board/{isee/igep0020/config.mk => schulercontrol/sc_sps_1/Makefile}
(57%) create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c create
mode 100644 board/st-ericsson/snowball/Makefile create mode 100644
board/st-ericsson/snowball/db8500_pins.h create mode 100644
board/st-ericsson/snowball/snowball.c create mode 100644
board/taskit/stamp9g20/Makefile create mode 100644
board/taskit/stamp9g20/led.c create mode 100644
board/taskit/stamp9g20/stamp9g20.c delete mode 100644
board/ti/am335x/evm.c create mode 100644 doc/README.atmel_pmecc create
mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644
drivers/gpio/db8500_gpio.c rename
arch/arm/cpu/armv7/omap-common/gpio.c => drivers/gpio/omap_gpio.c
(100%) create mode 100644 drivers/mmc/spl_mmc_load.c create mode
100644 drivers/net/cpsw.c create mode 100644 drivers/rtc/imxdi.c
create mode 100644 drivers/rtc/mx27rtc.c create mode 100644
drivers/usb/host/ohci-da8xx.c create mode 100644
drivers/video/exynos_dp.c create mode 100644
drivers/video/exynos_dp_lowlevel.c create mode 100644
drivers/video/exynos_dp_lowlevel.h create mode 100644
drivers/video/exynos_pwm_bl.c create mode 100644
include/configs/apx4devkit.h create mode 100644
include/configs/at91sam9x5ek.h rename include/configs/{efikamx.h =>
mx51_efikamx.h} (96%) create mode 100644 include/configs/rpi_b.h
create mode 100644 include/configs/sc_sps_1.h create mode 100644
include/configs/snowball.h create mode 100644
include/configs/stamp9g20.h rename
include/configs/{tegra2-common-post.h => tegra20-common-post.h} (74%)
rename include/configs/{tegra2-common.h => tegra20-common.h} (83%)
create mode 100644 include/cpsw.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-07-10 6:30 Albert ARIBAUD
@ 2012-07-10 7:04 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-07-10 7:04 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <20120710083046.119e0988@lilith> you wrote:
> Hi Wolfgang,
>
> Please consider applying this branch before -rc1.
>
> The following changes since commit 18277f7057c8e9b895aa4f8590969a57c4bce888:
>
> Revert "arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0" (2012-07-09 09:19:00 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 63905f1616fc2f827e986d8e82a5a2b69f4a0e6a:
>
> tegra: define fdt_load/fdt_high variables (2012-07-09 22:44:34 +0200)
>
> ----------------------------------------------------------------
> Jim Lin (1):
> tegra: usb: Fix device enumeration problem of USB1
>
> Lucas Stach (2):
> tegra: add ULPI on USB2 funcmux entry
> tegra: usb: fix wrong error check
>
> Peter Meerwald (1):
> beagle: add eeprom expansion board info for bct brettl4
>
> Stephen Warren (10):
> Add env vars describing U-Boot target board
> tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
> tegra: add enterrcm command
> tegra: bootcmd enhancements
> tegra: bootcmd: start USB only when needed
> tegra: add GMC/GMD funcmux entry for SFLASH
> tegra: add pin_mux_spi() board initialization function
> tegra: trimslice: set up serial flash pinmux
> tegra: enable bootz command
> tegra: define fdt_load/fdt_high variables
>
> Thierry Reding (7):
> tegra: Rework Tamonten support
> tegra: medcom: Add device tree support
> tegra: plutux: Add device tree support
> tegra: Allow boards to perform early GPIO setup
> tegra: Implement gpio_early_init() on Tamonten
> tegra: Use SD write-protect GPIO on Tamonten
> tegra: Add Tamonten Evaluation Carrier support
>
> Tom Warren (1):
> tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
>
> MAINTAINERS | 1 +
> README | 14 ++++
> arch/arm/cpu/armv7/tegra2/Makefile | 1 +
> arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c | 65 +++++++++++++++++++
> arch/arm/cpu/armv7/tegra2/funcmux.c | 23 ++++++-
> arch/arm/cpu/armv7/tegra2/usb.c | 2 +-
> arch/arm/include/asm/arch-tegra2/funcmux.h | 6 ++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
> board/avionic-design/common/tamonten.c | 65 ++++++-------------
> board/avionic-design/common/tamonten.h | 32 ----------
> board/avionic-design/dts/tegra2-medcom.dts | 58 +++++++++++++++++
> board/avionic-design/dts/tegra2-plutux.dts | 58 +++++++++++++++++
> board/avionic-design/dts/tegra2-tec.dts | 58 +++++++++++++++++
> board/avionic-design/medcom/Makefile | 6 +-
> board/avionic-design/medcom/medcom.c | 45 -------------
> board/avionic-design/plutux/Makefile | 6 +-
> board/avionic-design/plutux/plutux.c | 45 -------------
> board/avionic-design/tec/Makefile | 50 +++++++++++++++
> board/compal/paz00/paz00.c | 4 +-
> board/compulab/trimslice/trimslice.c | 7 +-
> board/nvidia/common/board.c | 16 ++++-
> board/nvidia/common/board.h | 1 +
> board/ti/beagle/beagle.c | 8 ++-
> boards.cfg | 1 +
> common/env_common.c | 11 ++++
> common/env_embedded.c | 11 ++++
> drivers/usb/host/ehci-tegra.c | 18 +++++-
> include/configs/medcom.h | 21 +++++-
> include/configs/plutux.h | 21 +++++-
> include/configs/tec.h | 82 ++++++++++++++++++++++++
> include/configs/tegra2-common-post.h | 96 ++++++++++++++++++----------
> include/configs/tegra2-common.h | 3 +
> mkconfig | 8 +++
> 33 files changed, 628 insertions(+), 216 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c
> delete mode 100644 board/avionic-design/common/tamonten.h
> create mode 100644 board/avionic-design/dts/tegra2-medcom.dts
> create mode 100644 board/avionic-design/dts/tegra2-plutux.dts
> create mode 100644 board/avionic-design/dts/tegra2-tec.dts
> delete mode 100644 board/avionic-design/medcom/medcom.c
> delete mode 100644 board/avionic-design/plutux/plutux.c
> create mode 100644 board/avionic-design/tec/Makefile
> create mode 100644 include/configs/tec.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
F u cn rd ths u cnt spl wrth a dm!
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-07-10 6:30 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Please consider applying this branch before -rc1.
The following changes since commit 18277f7057c8e9b895aa4f8590969a57c4bce888:
Revert "arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0" (2012-07-09 09:19:00 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 63905f1616fc2f827e986d8e82a5a2b69f4a0e6a:
tegra: define fdt_load/fdt_high variables (2012-07-09 22:44:34 +0200)
----------------------------------------------------------------
Jim Lin (1):
tegra: usb: Fix device enumeration problem of USB1
Lucas Stach (2):
tegra: add ULPI on USB2 funcmux entry
tegra: usb: fix wrong error check
Peter Meerwald (1):
beagle: add eeprom expansion board info for bct brettl4
Stephen Warren (10):
Add env vars describing U-Boot target board
tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
tegra: add enterrcm command
tegra: bootcmd enhancements
tegra: bootcmd: start USB only when needed
tegra: add GMC/GMD funcmux entry for SFLASH
tegra: add pin_mux_spi() board initialization function
tegra: trimslice: set up serial flash pinmux
tegra: enable bootz command
tegra: define fdt_load/fdt_high variables
Thierry Reding (7):
tegra: Rework Tamonten support
tegra: medcom: Add device tree support
tegra: plutux: Add device tree support
tegra: Allow boards to perform early GPIO setup
tegra: Implement gpio_early_init() on Tamonten
tegra: Use SD write-protect GPIO on Tamonten
tegra: Add Tamonten Evaluation Carrier support
Tom Warren (1):
tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
MAINTAINERS | 1 +
README | 14 ++++
arch/arm/cpu/armv7/tegra2/Makefile | 1 +
arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c | 65 +++++++++++++++++++
arch/arm/cpu/armv7/tegra2/funcmux.c | 23 ++++++-
arch/arm/cpu/armv7/tegra2/usb.c | 2 +-
arch/arm/include/asm/arch-tegra2/funcmux.h | 6 ++
arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
board/avionic-design/common/tamonten.c | 65 ++++++-------------
board/avionic-design/common/tamonten.h | 32 ----------
board/avionic-design/dts/tegra2-medcom.dts | 58 +++++++++++++++++
board/avionic-design/dts/tegra2-plutux.dts | 58 +++++++++++++++++
board/avionic-design/dts/tegra2-tec.dts | 58 +++++++++++++++++
board/avionic-design/medcom/Makefile | 6 +-
board/avionic-design/medcom/medcom.c | 45 -------------
board/avionic-design/plutux/Makefile | 6 +-
board/avionic-design/plutux/plutux.c | 45 -------------
board/avionic-design/tec/Makefile | 50 +++++++++++++++
board/compal/paz00/paz00.c | 4 +-
board/compulab/trimslice/trimslice.c | 7 +-
board/nvidia/common/board.c | 16 ++++-
board/nvidia/common/board.h | 1 +
board/ti/beagle/beagle.c | 8 ++-
boards.cfg | 1 +
common/env_common.c | 11 ++++
common/env_embedded.c | 11 ++++
drivers/usb/host/ehci-tegra.c | 18 +++++-
include/configs/medcom.h | 21 +++++-
include/configs/plutux.h | 21 +++++-
include/configs/tec.h | 82 ++++++++++++++++++++++++
include/configs/tegra2-common-post.h | 96 ++++++++++++++++++----------
include/configs/tegra2-common.h | 3 +
mkconfig | 8 +++
33 files changed, 628 insertions(+), 216 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c
delete mode 100644 board/avionic-design/common/tamonten.h
create mode 100644 board/avionic-design/dts/tegra2-medcom.dts
create mode 100644 board/avionic-design/dts/tegra2-plutux.dts
create mode 100644 board/avionic-design/dts/tegra2-tec.dts
delete mode 100644 board/avionic-design/medcom/medcom.c
delete mode 100644 board/avionic-design/plutux/plutux.c
create mode 100644 board/avionic-design/tec/Makefile
create mode 100644 include/configs/tec.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-07-07 12:12 Albert ARIBAUD
@ 2012-07-08 20:13 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-07-08 20:13 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <20120707141238.6d578281@lilith> you wrote:
>
> The following changes since commit
> 558cd995d6d3eaa94fb342d142289a1fa2f76ba3:
>
> tools/mkenvimage.c: fix basename(3) usage (2012-07-02 20:21:49 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to d702b0811df53a1fc2d8049e35431e4591d093c6:
>
> ARM: cache: Move the cp15 CR register read before flushing the cache.
> (2012-07-07 14:07:44 +0200)
>
> ----------------------------------------------------------------
> Alexandre Belloni (1):
> AT91SAM9*: Change kernel address in dataflash to match u-boot's
> size
>
> Amit Virdi (10):
> st_smi: Return error in case TFF is not set
> st_smi: Change SMI timeout values
> st_smi: Enhance the error handling
> st_smi: Change timeout loop implementation
> SPEAr: Fix ARM relocation support
> SPEAr: Eliminate dependency on Xloader table
> SPEAr: Initialize SNOR in early_board_init_f
> SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
> cleanup/SPEAr: Remove unnecessary parenthesis
> cleanup/SPEAr: Define configuration flags more elegantly
>
> Andreas Bie?mann (1):
> ehci-atmel: fix compiler warning
>
> Armando Visconti (4):
> st_smi: Removed no needed dependency on ST_M25Pxx_ID
> st_smi: Change the flash probing method
> st_smi: Fix bug in flash_print_info()
> st_smi: Fixed page size for Winbond W25Q128FV flash
>
> Bo Shen (3):
> Atmel : usb : add EHCI driver for Atmel SoC
> AT91: at91sam9m10g45ek : Enable EHCI instead OHCI
> ATMEL/PIO: Enable new feature of PIO on Atmel device
>
> Donghwa Lee (1):
> TRATS: initialize panel_info data structure in board file
>
> Fabio Estevam (24):
> mx53loco: Fix revision of Dialog boards
> mx53: Fix mask for SATA reference clock
> mx53loco: Remove unused SOBJS
> mx53evk: Remove unused SOBJS
> mx53ard: Remove unused SOBJS
> mx53smd: Remove unused SOBJS
> mx51evk: Remove unused SOBJS
> efikamx: Remove unused SOBJS
> vision2: Remove unused SOBJS
> ima3-mx53: Remove unused SOBJS
> mx6qarm2: Remove unused SOBJS
> mx6qsabrelite: Remove unused SOBJS
> mx53ard: Remove unused CONFIG_MII_GASKET
> imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
> mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
> mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
> mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
> mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
> mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
> mx28evk: Fix PSWITCH key position
> mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
> No need to define CONFIG_ARCH_CPU_INIT.
> ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
> ARM: introduce arch_early_init_r()
>
> Heiko Schocher (1):
> arm,davinci: update for enbw_cmc board
>
> Holger Brunck (13):
> arm/km: add board type to boards.cfg
> arm/km: add piggy mac adress offset for mgcoge3un
> arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
> arm/km: use ARRAY_SIZE macro
> arm/km: fix wrong comment in SDRAM config for mgcoge3un
> arm/km: change maintainer for mgcoge3un
> arm/km: remove CONFIG_RESET_PHY_R
> arm/km: add kmnusa board support
> arm/km: add kmcoge5un board support
> arm/km: convert mgcoge3un target to km_kirkwood
> arm/km: remove portl2.h and use km_kirkwood instead
> arm/km: cleanup km_kirkwood boards
> arm/km: remove calls to kw_gpio_* in board_early_init_f
>
> Igor Grinberg (1):
> cm-t35: reduce the environment size
>
> Jason Liu (1):
> i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly
>
> Lokesh Vutla (10):
> OMAP5: Adding correct Control id code for OMAP5430
> OMAP5: ADD chip detection for OMAP5432 SOC
> OMAP5: Configure the io settings for omap5432 uevm board
> OMAP5: ADD precalculated timings for ddr3
> OMAP5: EMIF: Add support for DDR3 device
> OMAP5: DPLL core lock for OMAP5432
> OMAP5: Change voltages for omap5432
> ARM: OMAP3+: Detect reset type
> OMAP4+: Handle sdram init after warm reset
> OMAP4+: Force DDR in self-refresh after warm reset
>
> Lucas Stach (2):
> tegra: sync SDIO1 pingroup enum name with TRM
> tegra: add SDIO1 funcmux entry for UARTA
>
> Luka Perkov (1):
> kwboot: boot kirkwood SoCs over a serial link
>
> Marek Vasut (3):
> i.MX28: Add function to adjust memory parameters
> Kirkwood: Add support for Ka-Ro TK71
> PXA: Enable CONFIG_PREBOOT on zipitz2
>
> Michael Langer (1):
> i.MX6 USDHC: Use the ESDHC clock
>
> Michael Walle (4):
> lib: add rand() function
> net: use common rand()/srand() functions
> net: add helper to generate random mac address
> Kirkwood: add lschlv2 and lsxhl board support
>
> Minkyu Kang (1):
> Exynos: fix cpuinfo and cpu detecting
>
> Nikita Kiryanov (4):
> cm-t35: fix incorrect BOARD_REV_SIZE value
> cm-t35: fix legacy board revision representation
> cm-t35: print PCB revision information
> cm-t35: fix incorrect NAND_ECC layout selection
>
> Otavio Salvador (6):
> MX28: Fix a typo in mx28_reg_8 macro
> m28evk: fix board config include guardian macro name
> mx28evk: ensure command definition is in alphabetic order
> mx28evk: fix board config include guardian macro name
> m28evk: drop duplicated definition of CONFIG_OF_LIBFDT
> m28evk: use same notation to alloc the 128kB stack
>
> Rajashekhara, Sudhakar (1):
> da850/omap-l138: Enable auto negotiation in RMII mode
>
> Rajeshwari Shinde (2):
> EXYNOS5: PINMUX: Added default pinumx settings
> EXYNOS: SMDK5250: Enable the pinmux setup
>
> SRICHARAN R (11):
> ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections.
> ARM: OMAP5: dmm: Create a tiler trap section.
> ARM: OMAP5: Align memory used for testing to the power of 2
> ARM: OMAP5: Correct the DRAM_ADDR_SPACE_END macro.
> ARM: OMAP4: Correct the lpddr2 io settings register value.
> ARM: OMAP4+: Move external phy initialisations to arch specific
> place. ARM: OMAP4/5: Move gpmc clocks to essential group.
> ARM: OMAP4/5: Move USB clocks to essential group.
> ARM: OMAP4/5: Move USB pads to essential list.
> ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls.
> ARM: cache: Move the cp15 CR register read before flushing the
> cache.
>
> Sebastien Jan (1):
> omap4: Use a smaller M,N couple for IVA DPLL
>
> Shiraz Hashim (5):
> st_smi: Move status register read before modifying ctrl register
> SPEAr: Enable autoneg for ethernet
> SPEAr: Enable dcache for fast file transfer
> SPEAr: explicitly select clk src for UART
> SPEAr: Correct SoC ID offset in misc configuration space
>
> Simon Glass (2):
> tegra: Correct PLL access in ap20.c and clock.c
> arm: Don't use printf() in SPL builds
>
> Simon Guinot (3):
> lacie_kw: fix SDRAM banks number for net2big_v2
> lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2
> ARM: don't probe PHY address for LaCie boards
>
> Stefan Roese (10):
> net: Multiple updates/enhancements to designware.c
> GPIO: Add SPEAr GPIO driver
> SPL: common/Makefile: Add image.c to SPL build
> SPL: lib/Makefile: Add crc32.c to SPL build
> SPL: ARM: spear: Remove some objects from SPL build
> Makefile: Add u-boot.spr build target (SPEAr)
> SPL: ARM: spear: Add SPL support for SPEAr600 platform
> rtc/m41t62: Add support for M41T82 with HT (Halt Update)
> i2c: designware_i2c.c: Add support for the "i2c probe" command
> MTD: SPEAr SMI: Add write support for length < 4 bytes
>
> Stephen Warren (22):
> tegra: paz00: fix typo in SD slot CD detect GPIO
> tegra: add alternate UART1 funcmux entry
> tegra: Whistler board support
> tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS
> tegra: flesh out bootcmd
> tegra: whistler: reduce and comment network cfg options
> tegra: seaboard: add support for USB networking
> tegra: add UART1 on GPU funcmux entry
> tegra: add SDMMC1 on SDIO1 funcmux entry
> tegra: Compulab TrimSlice board support
> tegra: harmony: add device tree support
> tegra: paz00: add device tree support
> tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it
> tegra: ventana: add own device tree, enable USB
> env_mmc: align buffers using ALLOC_CACHE_ALIGN_BUFFER
> sf: winbond: Add support for the Winbond W25Q80BL
> tegra: ventana: store environment in eMMC
> tegra: whistler: store environment in eMMC
> tegra: trimslice: store environment in SPI flash
> tegra: paz00: store environment in eMMC
> tegra: seaboard: disable SPI, move environment to eMMC
> tegra: trimslice: fix a couple typos
>
> Steve Sakoman (3):
> omap: emif: deal with rams that return duplicate mr data on all
> byte lanes omap: emif: fix bug in manufacturer code test
> omap: am33xx: accomodate input clocks other than 24 Mhz
>
> Tetsuyuki Kobayashi (2):
> arm: bugfix: Move vector table before jumping relocated code
> arm: bugfix: save_boot_params_default accesses uninitalized stack
> when -O0
>
> Thomas Herzmann (1):
> arm/km: add implementation for read_dip_switch
>
> Thomas Weber (1):
> omap4/5: Use CPUDIR for .lds script
>
> Tom Rini (10):
> am33xx: Do not call init_timer twice
> Revert "I2C: OMAP: detect more devices when probing an i2c bus"
> am335x: Correct i2c sysc offset
> am33xx: Fill in more cm_wkuppll / cm_perpll
> am33xx: Fix i2c sampling rate typo
> omap24xx_i2c: Add AM33XX support
> OMAP3 Beagle: Set BOOTDELAY to 3
> omap3evm: Set BOOTDELAY to 3
> omap3_beagle: Add CONFIG_CMD_ASKENV
> omap3evm: Add CONFIG_CMD_ASKENV
>
> Tom Warren (6):
> spi: Tegra2: Seaboard: fix UART corruption during SPI transactions
> spi: Tegra2: Seaboard: enable SPI/UART corruption fix
> spi: tegra2: rename tegra2_spi.* to tegra_spi.*
> mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*
> gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
> arm: Tegra: Use ODMDATA from BCT in IRAM
>
> Troy Kisky (1):
> DaVinci: fix ddr2 vtp i/o calibration
>
> Valentin Longchamp (13):
> arm/km: enable mii cmd
> km_arm: use filesize for erase in update command
> kirkwood: add save functionality kirkwood_mpp_conf function
> kirkwood: fix calls to kirkwood_mpp_conf
> kw_spi: backup and reset the MPP of the chosen CS pin
> kw_spi: support spi_claim/release_bus functions
> kw_spi: add weak functions board_spi_claim/release_bus
> arm/kirkwood: protect the ENV_SPI #defines
> arm/km: use spi claim bus to switch between SPI and NAND
> arm/km: enable BOCO2 FPGA download support
> arm/km: redefine piggy 4 reg names to avoid conflicts
> arm/km: skip FPGA config when already configured
> arm/km: support the 2 PCIe fpga resets
>
> Vikram Narayanan (1):
> mx6: Avoid writing to read-only bits in imximage.cfg
>
> Vipin KUMAR (14):
> mtd/NAND: Add FSMC driver support
> SPEAr: Configure FSMC driver for NAND interface
> mtd/NAND: Remove obsolete SPEAr specific NAND drivers
> st_smi: Add support for SPEAr SMI driver
> st_smi: Read status until timeout happens
> SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
> SPEAr: Configure network support for spear SoCs
> SPEAr: Add macb driver support for spear310 and spear320
> SPEAr: Add basic arch related support for SPEAr SoCs
> SPEAr: Add configuration options for spear3xx and spear6xx boards
> SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
> SPEAr: Change the default environment variables
> SPEAr: Enable usb device high speed support
> SPEAr: Enable udc and usb-console support only for usbtty
> configuration
>
> Vipin Kumar (6):
> st_smi: Fix smi read status
> SPEAr: Add interface information in initialization
> SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
> SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
> SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
> SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and
> evb
>
> amartin at nvidia.com (1):
> tegra: override compiler flags for low level init code
>
> esw at bus-elektronik.de (3):
> Fix: broken boot message at serial line on AT91SAM9263-EK board
> Fix: AT91SAM9263 nor flash usage
> add new board vl_ma2sc
>
> ?ukasz Majewski (1):
> misc:pmic:trats: Correct procedure of enabling/disabling USB
> regulators
>
> MAINTAINERS | 12 +-
> Makefile | 17 +
> arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 7 +-
> arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 2 -
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 +
> arch/arm/cpu/arm926ejs/spear/Makefile | 25 +-
> arch/arm/cpu/arm926ejs/spear/cpu.c | 87 +++
> arch/arm/cpu/arm926ejs/spear/spear600.c | 236 +++++++
> arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++
> arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++
> .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++
> .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++
> .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++
> .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++
> arch/arm/cpu/arm926ejs/spear/start.S | 122 ++++
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 +++
> arch/arm/cpu/armv7/am33xx/board.c | 30 +-
> arch/arm/cpu/armv7/cpu.c | 8 +-
> arch/arm/cpu/armv7/exynos/Makefile | 2 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 220 ++++++
> arch/arm/cpu/armv7/imx-common/speed.c | 4 +
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/mx6/soc.c | 2 -
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 8 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 189 ++++-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 24 +-
> arch/arm/cpu/armv7/omap-common/reset.c | 5 +
> arch/arm/cpu/armv7/omap4/clocks.c | 14 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 5 +
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 2 +-
> arch/arm/cpu/armv7/omap5/clocks.c | 39 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 123 +++-
> arch/arm/cpu/armv7/omap5/sdram.c | 87 ++-
> arch/arm/cpu/armv7/s5p-common/cpu_info.c | 5 +-
> arch/arm/cpu/armv7/start.S | 12 +
> arch/arm/cpu/armv7/tegra2/ap20.c | 28 +-
> arch/arm/cpu/armv7/tegra2/board.c | 18 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 4 +-
> arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
> arch/arm/cpu/armv7/tegra2/funcmux.c | 30 +-
> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 10 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 44 +-
> arch/arm/include/asm/arch-am33xx/i2c.h | 8 +-
> arch/arm/include/asm/arch-at91/at91_pio.h | 45 +-
> arch/arm/include/asm/arch-exynos/cpu.h | 42 +-
> arch/arm/include/asm/arch-exynos/periph.h | 47 ++
> arch/arm/include/asm/arch-exynos/pinmux.h | 58 ++
> arch/arm/include/asm/arch-kirkwood/config.h | 12 +-
> arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
> arch/arm/include/asm/arch-kirkwood/spi.h | 11 +
> arch/arm/include/asm/arch-mx28/regs-common.h | 2 +-
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 2 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap4/clocks.h | 5 +
> arch/arm/include/asm/arch-omap4/cpu.h | 2 +
> arch/arm/include/asm/arch-omap4/omap.h | 2 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +
> arch/arm/include/asm/arch-omap5/clocks.h | 15 +
> arch/arm/include/asm/arch-omap5/cpu.h | 2 +
> arch/arm/include/asm/arch-omap5/omap.h | 20 +-
> arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +
> arch/arm/include/asm/arch-s5pc1xx/cpu.h | 6 +
> arch/arm/include/asm/arch-spear/clk.h | 27 +
> arch/arm/include/asm/arch-spear/gpio.h | 40 ++
> arch/arm/include/asm/arch-spear/hardware.h | 63 +-
> arch/arm/include/asm/arch-spear/spr_defs.h | 23 +
> arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +-
> arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++-
> arch/arm/include/asm/arch-spear/spr_nand.h | 57 --
> arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++
> arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 +
> .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 --
> arch/arm/include/asm/arch-tegra2/clock.h | 5 +-
> arch/arm/include/asm/arch-tegra2/funcmux.h | 4 +
> arch/arm/include/asm/arch-tegra2/gpio.h | 7 +-
> arch/arm/include/asm/arch-tegra2/pinmux.h | 2 +-
> arch/arm/include/asm/arch-tegra2/tegra2.h | 4 +
> .../asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} | 9 +-
> arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 4 +-
> arch/arm/include/asm/emif.h | 52 +-
> arch/arm/include/asm/omap_common.h | 1 +
> arch/arm/include/asm/u-boot-arm.h | 1 +
> arch/arm/lib/board.c | 4 +
> arch/arm/lib/cache-cp15.c | 6 +-
> arch/arm/lib/eabi_compat.c | 3 +-
> .../spear310/config.mk => BuS/vl_ma2sc/Makefile} | 42 +-
> board/BuS/vl_ma2sc/vl_ma2sc.c | 551
> +++++++++++++++ board/LaCie/common/common.c |
> 23 +- board/LaCie/common/common.h | 2 +-
> board/LaCie/edminiv2/edminiv2.c | 2 +-
> board/LaCie/net2big_v2/net2big_v2.c | 4 +-
> board/LaCie/netspace_v2/netspace_v2.c | 4 +-
> board/Marvell/dreamplug/dreamplug.c | 2 +-
> board/Marvell/guruplug/guruplug.c | 2 +-
> board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +-
> board/Marvell/openrd/openrd.c | 2 +-
> board/Marvell/rd6281a/rd6281a.c | 2 +-
> board/Marvell/sheevaplug/sheevaplug.c | 2 +-
> board/Seagate/dockstar/dockstar.c | 2 +-
> board/atmel/at91sam9260ek/partition.c | 6 +-
> board/atmel/at91sam9261ek/partition.c | 6 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +-
> board/atmel/at91sam9263ek/partition.c | 6 +-
> board/atmel/at91sam9rlek/partition.c | 6 +-
> .../spear320/config.mk => buffalo/lsxl/Makefile} | 42 +-
> board/buffalo/lsxl/kwbimage-lschl.cfg | 229 ++++++
> board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 ++++++
> board/buffalo/lsxl/lsxl.c | 283 ++++++++
> board/buffalo/lsxl/lsxl.h | 75 ++
> board/cloudengines/pogo_e02/pogo_e02.c | 2 +-
> board/cm_t35/cm_t35.c | 33 +
> board/cm_t35/eeprom.c | 26 +-
> board/cm_t35/eeprom.h | 5 +
> board/compal/dts/tegra2-paz00.dts | 57 ++
> board/compal/paz00/paz00.c | 12 +-
> board/compulab/dts/tegra2-trimslice.dts | 57 ++
> board/compulab/trimslice/Makefile | 49 ++
> board/compulab/trimslice/trimslice.c | 73 ++
> board/d-link/dns325/dns325.c | 2 +-
> board/efikamx/Makefile | 7 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 347 ++++++++-
> board/esg/ima3-mx53/Makefile | 2 +-
> board/freescale/mx28evk/iomux.c | 14 +
> board/freescale/mx51evk/Makefile | 7 +-
> board/freescale/mx53ard/Makefile | 7 +-
> board/freescale/mx53evk/Makefile | 7 +-
> board/freescale/mx53loco/Makefile | 7 +-
> board/freescale/mx53loco/mx53loco.c | 12 +-
> board/freescale/mx53smd/Makefile | 7 +-
> board/freescale/mx6qarm2/Makefile | 7 +-
> board/freescale/mx6qarm2/imximage.cfg | 2 +-
> board/freescale/mx6qsabrelite/Makefile | 7 +-
> board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
> .../spear300/config.mk => karo/tk71/Makefile} | 40 +-
> board/karo/tk71/kwbimage.cfg | 174 +++++
> board/karo/tk71/tk71.c | 166 +++++
> board/keymile/common/common.h | 5 +
> board/keymile/km_arm/Makefile | 4 +
> board/keymile/km_arm/fpga_config.c | 256 +++++++
> board/keymile/km_arm/km_arm.c | 152 ++--
> board/keymile/km_arm/kwbimage-memphis.cfg | 2 +-
> board/keymile/km_arm/kwbimage_128M16_1.cfg | 294 ++++++++
> board/keymile/km_arm/kwbimage_256M8_1.cfg | 296 ++++++++
> board/nvidia/common/uart-spi-switch.c | 29 +-
> board/nvidia/dts/tegra2-harmony.dts | 57 ++
> board/nvidia/dts/tegra2-ventana.dts | 57 ++
> board/nvidia/dts/tegra2-whistler.dts | 67 ++
> board/nvidia/harmony/harmony.c | 4 +-
> board/nvidia/seaboard/seaboard.c | 4 +-
> board/nvidia/whistler/Makefile | 48 ++
> board/nvidia/whistler/whistler.c | 116 +++
> board/raidsonic/ib62x0/ib62x0.c | 2 +-
> board/samsung/smdk5250/smdk5250.c | 176 +----
> board/samsung/trats/trats.c | 85 ++-
> board/spear/common/Makefile | 2 +
> board/spear/common/spr_misc.c | 102 +--
> board/spear/spear300/spear300.c | 27 +-
> board/spear/spear310/spear310.c | 44 +-
> board/spear/spear320/spear320.c | 43 +-
> board/spear/spear600/Makefile | 2 +
> board/spear/spear600/config.mk | 39 -
> board/spear/spear600/spear600.c | 30 +-
> board/ti/am335x/evm.c | 13 +-
> board/ti/omap5_evm/mux_data.h | 18 +-
> board/ti/sdp4430/sdp4430_mux_data.h | 25 +-
> board/ttcontrol/vision2/Makefile | 5 +-
> boards.cfg | 41 +-
> common/Makefile | 2 +-
> common/env_mmc.c | 10 +-
> config.mk | 4 +
> doc/README.mx28evk | 2 +-
> doc/README.spear | 54 +-
> doc/README.switch_config | 25 +
> doc/kwboot.1 | 84 +++
> drivers/gpio/Makefile | 3 +-
> drivers/gpio/at91_gpio.c | 125 +++-
> drivers/gpio/spear_gpio.c | 102 +++
> drivers/gpio/{tegra2_gpio.c => tegra_gpio.c} | 2 +-
> drivers/i2c/designware_i2c.c | 16 +-
> drivers/i2c/omap24xx_i2c.c | 46 +-
> drivers/mmc/Makefile | 2 +-
> drivers/mmc/{tegra2_mmc.c => tegra_mmc.c} | 4 +-
> drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} | 8 +-
> drivers/mtd/Makefile | 2 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/fsmc_nand.c | 486 +++++++++++++
> drivers/mtd/nand/spr_nand.c | 124 ----
> drivers/mtd/spi/winbond.c | 8 +
> drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++---
> drivers/net/davinci_emac.c | 8 +
> drivers/net/designware.c | 126 ++--
> drivers/net/designware.h | 2 +
> drivers/rtc/m41t62.c | 10 +-
> drivers/spi/Makefile | 2 +-
> drivers/spi/kirkwood_spi.c | 64 +-
> drivers/spi/{tegra2_spi.c => tegra_spi.c} | 17 +-
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-atmel.c | 89 +++
> drivers/video/exynos_fb.c | 3 -
> include/common.h | 10 +
> include/configs/at91sam9260ek.h | 5 +-
> include/configs/at91sam9261ek.h | 5 +-
> include/configs/at91sam9263ek.h | 10 +-
> include/configs/at91sam9m10g45ek.h | 20 +-
> include/configs/at91sam9rlek.h | 3 +-
> include/configs/cm_t35.h | 5 +-
> include/configs/enbw_cmc.h | 20 +-
> include/configs/harmony.h | 29 +-
> include/configs/imx31_phycore.h | 1 -
> include/configs/km/km_arm.h | 63 +-
> include/configs/km_kirkwood.h | 141 +++-
> include/configs/lacie_kw.h | 6 +-
> include/configs/lsxl.h | 182 +++++
> include/configs/m28evk.h | 11 +-
> include/configs/medcom.h | 6 +-
> include/configs/mgcoge3un.h | 86 ---
> include/configs/mx28evk.h | 9 +-
> include/configs/mx35pdk.h | 1 -
> include/configs/mx53ard.h | 2 -
> include/configs/mx53evk.h | 1 -
> include/configs/mx53loco.h | 2 -
> include/configs/mx53smd.h | 1 -
> include/configs/mx6qarm2.h | 1 -
> include/configs/mx6qsabrelite.h | 1 -
> include/configs/omap3_beagle.h | 4 +-
> include/configs/omap3_evm.h | 4 +-
> include/configs/omap4_common.h | 7 +-
> include/configs/omap5_evm.h | 4 +-
> include/configs/paz00.h | 34 +-
> include/configs/plutux.h | 6 +-
> include/configs/portl2.h | 85 ---
> include/configs/seaboard.h | 35 +-
> include/configs/spear-common.h | 94 ++-
> include/configs/{spear3xx.h => spear3xx_evb.h} | 62 +-
> include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +-
> include/configs/tegra2-common-post.h | 117 +++
> include/configs/tegra2-common.h | 10 +-
> include/configs/tk71.h | 130 ++++
> include/configs/trimslice.h | 99 +++
> include/configs/ventana.h | 29 +-
> include/configs/vl_ma2sc.h | 463 ++++++++++++
> include/configs/whistler.h | 94 +++
> include/configs/zipitz2.h | 1 +
> include/linux/mtd/fsmc_nand.h | 101 +++
> .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
> include/net.h | 17 +
> include/netdev.h | 2 +-
> lib/Makefile | 7 +-
> lib/rand.c | 48 ++
> net/Makefile | 2 -
> net/eth.c | 22 +
> net/link_local.c | 7 +-
> net/net_rand.c | 68 --
> net/net_rand.h | 31 +-
> tools/Makefile | 6 +
> tools/kwboot.c | 742
> ++++++++++++++++++++ 258 files changed, 11028 insertions(+), 1775
> deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
> create mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
> create mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create
> mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
> create mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/start.S create mode
> 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds create mode 100644
> arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644
> arch/arm/include/asm/arch-exynos/periph.h create mode 100644
> arch/arm/include/asm/arch-exynos/pinmux.h create mode 100644
> arch/arm/include/asm/arch-spear/clk.h create mode 100644
> arch/arm/include/asm/arch-spear/gpio.h delete mode 100644
> arch/arm/include/asm/arch-spear/spr_nand.h create mode 100644
> arch/arm/include/asm/arch-spear/spr_ssp.h delete mode 100644
> arch/arm/include/asm/arch-spear/spr_xloader_table.h rename
> arch/arm/include/asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} (95%)
> rename board/{spear/spear310/config.mk => BuS/vl_ma2sc/Makefile} (54%)
> create mode 100644 board/BuS/vl_ma2sc/vl_ma2sc.c rename
> board/{spear/spear320/config.mk => buffalo/lsxl/Makefile} (52%) create
> mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644
> board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644
> board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h
> create mode 100644 board/compal/dts/tegra2-paz00.dts create mode
> 100644 board/compulab/dts/tegra2-trimslice.dts create mode 100644
> board/compulab/trimslice/Makefile create mode 100644
> board/compulab/trimslice/trimslice.c rename
> board/{spear/spear300/config.mk => karo/tk71/Makefile} (51%) create
> mode 100644 board/karo/tk71/kwbimage.cfg create mode 100644
> board/karo/tk71/tk71.c create mode 100644
> board/keymile/km_arm/fpga_config.c create mode 100644
> board/keymile/km_arm/kwbimage_128M16_1.cfg create mode 100644
> board/keymile/km_arm/kwbimage_256M8_1.cfg create mode 100644
> board/nvidia/dts/tegra2-harmony.dts create mode 100644
> board/nvidia/dts/tegra2-ventana.dts create mode 100644
> board/nvidia/dts/tegra2-whistler.dts create mode 100644
> board/nvidia/whistler/Makefile create mode 100644
> board/nvidia/whistler/whistler.c delete mode 100644
> board/spear/spear600/config.mk create mode 100644
> doc/README.switch_config create mode 100644 doc/kwboot.1 create mode
> 100644 drivers/gpio/spear_gpio.c rename drivers/gpio/{tegra2_gpio.c =>
> tegra_gpio.c} (99%) rename drivers/mmc/{tegra2_mmc.c => tegra_mmc.c}
> (99%) rename drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} (97%) create
> mode 100644 drivers/mtd/nand/fsmc_nand.c delete mode 100644
> drivers/mtd/nand/spr_nand.c rename drivers/mtd/{spr_smi.c => st_smi.c}
> (62%) rename drivers/spi/{tegra2_spi.c => tegra_spi.c} (95%)
> create mode 100644 drivers/usb/host/ehci-atmel.c
> create mode 100644 include/configs/lsxl.h
> delete mode 100644 include/configs/mgcoge3un.h
> delete mode 100644 include/configs/portl2.h
> rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
> rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
> create mode 100644 include/configs/tegra2-common-post.h
> create mode 100644 include/configs/tk71.h
> create mode 100644 include/configs/trimslice.h
> create mode 100644 include/configs/vl_ma2sc.h
> create mode 100644 include/configs/whistler.h
> create mode 100644 include/linux/mtd/fsmc_nand.h
> rename arch/arm/include/asm/arch-spear/spr_smi.h =>
> include/linux/mtd/st_smi.h (95%) create mode 100644 lib/rand.c
> delete mode 100644 net/net_rand.c
> create mode 100644 tools/kwboot.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You get a wonderful view from the point of no return.
- Terry Pratchett, _Making_Money_
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-07-07 12:12 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit
558cd995d6d3eaa94fb342d142289a1fa2f76ba3:
tools/mkenvimage.c: fix basename(3) usage (2012-07-02 20:21:49 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to d702b0811df53a1fc2d8049e35431e4591d093c6:
ARM: cache: Move the cp15 CR register read before flushing the cache.
(2012-07-07 14:07:44 +0200)
----------------------------------------------------------------
Alexandre Belloni (1):
AT91SAM9*: Change kernel address in dataflash to match u-boot's
size
Amit Virdi (10):
st_smi: Return error in case TFF is not set
st_smi: Change SMI timeout values
st_smi: Enhance the error handling
st_smi: Change timeout loop implementation
SPEAr: Fix ARM relocation support
SPEAr: Eliminate dependency on Xloader table
SPEAr: Initialize SNOR in early_board_init_f
SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
cleanup/SPEAr: Remove unnecessary parenthesis
cleanup/SPEAr: Define configuration flags more elegantly
Andreas Bie?mann (1):
ehci-atmel: fix compiler warning
Armando Visconti (4):
st_smi: Removed no needed dependency on ST_M25Pxx_ID
st_smi: Change the flash probing method
st_smi: Fix bug in flash_print_info()
st_smi: Fixed page size for Winbond W25Q128FV flash
Bo Shen (3):
Atmel : usb : add EHCI driver for Atmel SoC
AT91: at91sam9m10g45ek : Enable EHCI instead OHCI
ATMEL/PIO: Enable new feature of PIO on Atmel device
Donghwa Lee (1):
TRATS: initialize panel_info data structure in board file
Fabio Estevam (24):
mx53loco: Fix revision of Dialog boards
mx53: Fix mask for SATA reference clock
mx53loco: Remove unused SOBJS
mx53evk: Remove unused SOBJS
mx53ard: Remove unused SOBJS
mx53smd: Remove unused SOBJS
mx51evk: Remove unused SOBJS
efikamx: Remove unused SOBJS
vision2: Remove unused SOBJS
ima3-mx53: Remove unused SOBJS
mx6qarm2: Remove unused SOBJS
mx6qsabrelite: Remove unused SOBJS
mx53ard: Remove unused CONFIG_MII_GASKET
imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
mx28evk: Fix PSWITCH key position
mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
No need to define CONFIG_ARCH_CPU_INIT.
ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
ARM: introduce arch_early_init_r()
Heiko Schocher (1):
arm,davinci: update for enbw_cmc board
Holger Brunck (13):
arm/km: add board type to boards.cfg
arm/km: add piggy mac adress offset for mgcoge3un
arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
arm/km: use ARRAY_SIZE macro
arm/km: fix wrong comment in SDRAM config for mgcoge3un
arm/km: change maintainer for mgcoge3un
arm/km: remove CONFIG_RESET_PHY_R
arm/km: add kmnusa board support
arm/km: add kmcoge5un board support
arm/km: convert mgcoge3un target to km_kirkwood
arm/km: remove portl2.h and use km_kirkwood instead
arm/km: cleanup km_kirkwood boards
arm/km: remove calls to kw_gpio_* in board_early_init_f
Igor Grinberg (1):
cm-t35: reduce the environment size
Jason Liu (1):
i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly
Lokesh Vutla (10):
OMAP5: Adding correct Control id code for OMAP5430
OMAP5: ADD chip detection for OMAP5432 SOC
OMAP5: Configure the io settings for omap5432 uevm board
OMAP5: ADD precalculated timings for ddr3
OMAP5: EMIF: Add support for DDR3 device
OMAP5: DPLL core lock for OMAP5432
OMAP5: Change voltages for omap5432
ARM: OMAP3+: Detect reset type
OMAP4+: Handle sdram init after warm reset
OMAP4+: Force DDR in self-refresh after warm reset
Lucas Stach (2):
tegra: sync SDIO1 pingroup enum name with TRM
tegra: add SDIO1 funcmux entry for UARTA
Luka Perkov (1):
kwboot: boot kirkwood SoCs over a serial link
Marek Vasut (3):
i.MX28: Add function to adjust memory parameters
Kirkwood: Add support for Ka-Ro TK71
PXA: Enable CONFIG_PREBOOT on zipitz2
Michael Langer (1):
i.MX6 USDHC: Use the ESDHC clock
Michael Walle (4):
lib: add rand() function
net: use common rand()/srand() functions
net: add helper to generate random mac address
Kirkwood: add lschlv2 and lsxhl board support
Minkyu Kang (1):
Exynos: fix cpuinfo and cpu detecting
Nikita Kiryanov (4):
cm-t35: fix incorrect BOARD_REV_SIZE value
cm-t35: fix legacy board revision representation
cm-t35: print PCB revision information
cm-t35: fix incorrect NAND_ECC layout selection
Otavio Salvador (6):
MX28: Fix a typo in mx28_reg_8 macro
m28evk: fix board config include guardian macro name
mx28evk: ensure command definition is in alphabetic order
mx28evk: fix board config include guardian macro name
m28evk: drop duplicated definition of CONFIG_OF_LIBFDT
m28evk: use same notation to alloc the 128kB stack
Rajashekhara, Sudhakar (1):
da850/omap-l138: Enable auto negotiation in RMII mode
Rajeshwari Shinde (2):
EXYNOS5: PINMUX: Added default pinumx settings
EXYNOS: SMDK5250: Enable the pinmux setup
SRICHARAN R (11):
ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections.
ARM: OMAP5: dmm: Create a tiler trap section.
ARM: OMAP5: Align memory used for testing to the power of 2
ARM: OMAP5: Correct the DRAM_ADDR_SPACE_END macro.
ARM: OMAP4: Correct the lpddr2 io settings register value.
ARM: OMAP4+: Move external phy initialisations to arch specific
place. ARM: OMAP4/5: Move gpmc clocks to essential group.
ARM: OMAP4/5: Move USB clocks to essential group.
ARM: OMAP4/5: Move USB pads to essential list.
ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls.
ARM: cache: Move the cp15 CR register read before flushing the
cache.
Sebastien Jan (1):
omap4: Use a smaller M,N couple for IVA DPLL
Shiraz Hashim (5):
st_smi: Move status register read before modifying ctrl register
SPEAr: Enable autoneg for ethernet
SPEAr: Enable dcache for fast file transfer
SPEAr: explicitly select clk src for UART
SPEAr: Correct SoC ID offset in misc configuration space
Simon Glass (2):
tegra: Correct PLL access in ap20.c and clock.c
arm: Don't use printf() in SPL builds
Simon Guinot (3):
lacie_kw: fix SDRAM banks number for net2big_v2
lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2
ARM: don't probe PHY address for LaCie boards
Stefan Roese (10):
net: Multiple updates/enhancements to designware.c
GPIO: Add SPEAr GPIO driver
SPL: common/Makefile: Add image.c to SPL build
SPL: lib/Makefile: Add crc32.c to SPL build
SPL: ARM: spear: Remove some objects from SPL build
Makefile: Add u-boot.spr build target (SPEAr)
SPL: ARM: spear: Add SPL support for SPEAr600 platform
rtc/m41t62: Add support for M41T82 with HT (Halt Update)
i2c: designware_i2c.c: Add support for the "i2c probe" command
MTD: SPEAr SMI: Add write support for length < 4 bytes
Stephen Warren (22):
tegra: paz00: fix typo in SD slot CD detect GPIO
tegra: add alternate UART1 funcmux entry
tegra: Whistler board support
tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS
tegra: flesh out bootcmd
tegra: whistler: reduce and comment network cfg options
tegra: seaboard: add support for USB networking
tegra: add UART1 on GPU funcmux entry
tegra: add SDMMC1 on SDIO1 funcmux entry
tegra: Compulab TrimSlice board support
tegra: harmony: add device tree support
tegra: paz00: add device tree support
tegra: remove CONFIG_USB_ETHER_SMSC95XX from boards without it
tegra: ventana: add own device tree, enable USB
env_mmc: align buffers using ALLOC_CACHE_ALIGN_BUFFER
sf: winbond: Add support for the Winbond W25Q80BL
tegra: ventana: store environment in eMMC
tegra: whistler: store environment in eMMC
tegra: trimslice: store environment in SPI flash
tegra: paz00: store environment in eMMC
tegra: seaboard: disable SPI, move environment to eMMC
tegra: trimslice: fix a couple typos
Steve Sakoman (3):
omap: emif: deal with rams that return duplicate mr data on all
byte lanes omap: emif: fix bug in manufacturer code test
omap: am33xx: accomodate input clocks other than 24 Mhz
Tetsuyuki Kobayashi (2):
arm: bugfix: Move vector table before jumping relocated code
arm: bugfix: save_boot_params_default accesses uninitalized stack
when -O0
Thomas Herzmann (1):
arm/km: add implementation for read_dip_switch
Thomas Weber (1):
omap4/5: Use CPUDIR for .lds script
Tom Rini (10):
am33xx: Do not call init_timer twice
Revert "I2C: OMAP: detect more devices when probing an i2c bus"
am335x: Correct i2c sysc offset
am33xx: Fill in more cm_wkuppll / cm_perpll
am33xx: Fix i2c sampling rate typo
omap24xx_i2c: Add AM33XX support
OMAP3 Beagle: Set BOOTDELAY to 3
omap3evm: Set BOOTDELAY to 3
omap3_beagle: Add CONFIG_CMD_ASKENV
omap3evm: Add CONFIG_CMD_ASKENV
Tom Warren (6):
spi: Tegra2: Seaboard: fix UART corruption during SPI transactions
spi: Tegra2: Seaboard: enable SPI/UART corruption fix
spi: tegra2: rename tegra2_spi.* to tegra_spi.*
mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*
gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
arm: Tegra: Use ODMDATA from BCT in IRAM
Troy Kisky (1):
DaVinci: fix ddr2 vtp i/o calibration
Valentin Longchamp (13):
arm/km: enable mii cmd
km_arm: use filesize for erase in update command
kirkwood: add save functionality kirkwood_mpp_conf function
kirkwood: fix calls to kirkwood_mpp_conf
kw_spi: backup and reset the MPP of the chosen CS pin
kw_spi: support spi_claim/release_bus functions
kw_spi: add weak functions board_spi_claim/release_bus
arm/kirkwood: protect the ENV_SPI #defines
arm/km: use spi claim bus to switch between SPI and NAND
arm/km: enable BOCO2 FPGA download support
arm/km: redefine piggy 4 reg names to avoid conflicts
arm/km: skip FPGA config when already configured
arm/km: support the 2 PCIe fpga resets
Vikram Narayanan (1):
mx6: Avoid writing to read-only bits in imximage.cfg
Vipin KUMAR (14):
mtd/NAND: Add FSMC driver support
SPEAr: Configure FSMC driver for NAND interface
mtd/NAND: Remove obsolete SPEAr specific NAND drivers
st_smi: Add support for SPEAr SMI driver
st_smi: Read status until timeout happens
SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
SPEAr: Configure network support for spear SoCs
SPEAr: Add macb driver support for spear310 and spear320
SPEAr: Add basic arch related support for SPEAr SoCs
SPEAr: Add configuration options for spear3xx and spear6xx boards
SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
SPEAr: Change the default environment variables
SPEAr: Enable usb device high speed support
SPEAr: Enable udc and usb-console support only for usbtty
configuration
Vipin Kumar (6):
st_smi: Fix smi read status
SPEAr: Add interface information in initialization
SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and
evb
amartin at nvidia.com (1):
tegra: override compiler flags for low level init code
esw at bus-elektronik.de (3):
Fix: broken boot message@serial line on AT91SAM9263-EK board
Fix: AT91SAM9263 nor flash usage
add new board vl_ma2sc
?ukasz Majewski (1):
misc:pmic:trats: Correct procedure of enabling/disabling USB
regulators
MAINTAINERS | 12 +-
Makefile | 17 +
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 7 +-
arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 2 -
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 +
arch/arm/cpu/arm926ejs/spear/Makefile | 25 +-
arch/arm/cpu/arm926ejs/spear/cpu.c | 87 +++
arch/arm/cpu/arm926ejs/spear/spear600.c | 236 +++++++
arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++
arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++
.../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++
.../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++
.../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++
.../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++
arch/arm/cpu/arm926ejs/spear/start.S | 122 ++++
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 +++
arch/arm/cpu/armv7/am33xx/board.c | 30 +-
arch/arm/cpu/armv7/cpu.c | 8 +-
arch/arm/cpu/armv7/exynos/Makefile | 2 +-
arch/arm/cpu/armv7/exynos/pinmux.c | 220 ++++++
arch/arm/cpu/armv7/imx-common/speed.c | 4 +
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/soc.c | 2 -
arch/arm/cpu/armv7/omap-common/clocks-common.c | 8 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 189 ++++-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 24 +-
arch/arm/cpu/armv7/omap-common/reset.c | 5 +
arch/arm/cpu/armv7/omap4/clocks.c | 14 +-
arch/arm/cpu/armv7/omap4/hwinit.c | 5 +
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 39 +-
arch/arm/cpu/armv7/omap5/hwinit.c | 123 +++-
arch/arm/cpu/armv7/omap5/sdram.c | 87 ++-
arch/arm/cpu/armv7/s5p-common/cpu_info.c | 5 +-
arch/arm/cpu/armv7/start.S | 12 +
arch/arm/cpu/armv7/tegra2/ap20.c | 28 +-
arch/arm/cpu/armv7/tegra2/board.c | 18 +-
arch/arm/cpu/armv7/tegra2/clock.c | 4 +-
arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
arch/arm/cpu/armv7/tegra2/funcmux.c | 30 +-
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 10 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 44 +-
arch/arm/include/asm/arch-am33xx/i2c.h | 8 +-
arch/arm/include/asm/arch-at91/at91_pio.h | 45 +-
arch/arm/include/asm/arch-exynos/cpu.h | 42 +-
arch/arm/include/asm/arch-exynos/periph.h | 47 ++
arch/arm/include/asm/arch-exynos/pinmux.h | 58 ++
arch/arm/include/asm/arch-kirkwood/config.h | 12 +-
arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
arch/arm/include/asm/arch-kirkwood/spi.h | 11 +
arch/arm/include/asm/arch-mx28/regs-common.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 +-
arch/arm/include/asm/arch-omap3/cpu.h | 2 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/clocks.h | 5 +
arch/arm/include/asm/arch-omap4/cpu.h | 2 +
arch/arm/include/asm/arch-omap4/omap.h | 2 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +
arch/arm/include/asm/arch-omap5/clocks.h | 15 +
arch/arm/include/asm/arch-omap5/cpu.h | 2 +
arch/arm/include/asm/arch-omap5/omap.h | 20 +-
arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +
arch/arm/include/asm/arch-s5pc1xx/cpu.h | 6 +
arch/arm/include/asm/arch-spear/clk.h | 27 +
arch/arm/include/asm/arch-spear/gpio.h | 40 ++
arch/arm/include/asm/arch-spear/hardware.h | 63 +-
arch/arm/include/asm/arch-spear/spr_defs.h | 23 +
arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +-
arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++-
arch/arm/include/asm/arch-spear/spr_nand.h | 57 --
arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++
arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 +
.../arm/include/asm/arch-spear/spr_xloader_table.h | 67 --
arch/arm/include/asm/arch-tegra2/clock.h | 5 +-
arch/arm/include/asm/arch-tegra2/funcmux.h | 4 +
arch/arm/include/asm/arch-tegra2/gpio.h | 7 +-
arch/arm/include/asm/arch-tegra2/pinmux.h | 2 +-
arch/arm/include/asm/arch-tegra2/tegra2.h | 4 +
.../asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} | 9 +-
arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 4 +-
arch/arm/include/asm/emif.h | 52 +-
arch/arm/include/asm/omap_common.h | 1 +
arch/arm/include/asm/u-boot-arm.h | 1 +
arch/arm/lib/board.c | 4 +
arch/arm/lib/cache-cp15.c | 6 +-
arch/arm/lib/eabi_compat.c | 3 +-
.../spear310/config.mk => BuS/vl_ma2sc/Makefile} | 42 +-
board/BuS/vl_ma2sc/vl_ma2sc.c | 551
+++++++++++++++ board/LaCie/common/common.c |
23 +- board/LaCie/common/common.h | 2 +-
board/LaCie/edminiv2/edminiv2.c | 2 +-
board/LaCie/net2big_v2/net2big_v2.c | 4 +-
board/LaCie/netspace_v2/netspace_v2.c | 4 +-
board/Marvell/dreamplug/dreamplug.c | 2 +-
board/Marvell/guruplug/guruplug.c | 2 +-
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +-
board/Marvell/openrd/openrd.c | 2 +-
board/Marvell/rd6281a/rd6281a.c | 2 +-
board/Marvell/sheevaplug/sheevaplug.c | 2 +-
board/Seagate/dockstar/dockstar.c | 2 +-
board/atmel/at91sam9260ek/partition.c | 6 +-
board/atmel/at91sam9261ek/partition.c | 6 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +-
board/atmel/at91sam9263ek/partition.c | 6 +-
board/atmel/at91sam9rlek/partition.c | 6 +-
.../spear320/config.mk => buffalo/lsxl/Makefile} | 42 +-
board/buffalo/lsxl/kwbimage-lschl.cfg | 229 ++++++
board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 ++++++
board/buffalo/lsxl/lsxl.c | 283 ++++++++
board/buffalo/lsxl/lsxl.h | 75 ++
board/cloudengines/pogo_e02/pogo_e02.c | 2 +-
board/cm_t35/cm_t35.c | 33 +
board/cm_t35/eeprom.c | 26 +-
board/cm_t35/eeprom.h | 5 +
board/compal/dts/tegra2-paz00.dts | 57 ++
board/compal/paz00/paz00.c | 12 +-
board/compulab/dts/tegra2-trimslice.dts | 57 ++
board/compulab/trimslice/Makefile | 49 ++
board/compulab/trimslice/trimslice.c | 73 ++
board/d-link/dns325/dns325.c | 2 +-
board/efikamx/Makefile | 7 +-
board/enbw/enbw_cmc/enbw_cmc.c | 347 ++++++++-
board/esg/ima3-mx53/Makefile | 2 +-
board/freescale/mx28evk/iomux.c | 14 +
board/freescale/mx51evk/Makefile | 7 +-
board/freescale/mx53ard/Makefile | 7 +-
board/freescale/mx53evk/Makefile | 7 +-
board/freescale/mx53loco/Makefile | 7 +-
board/freescale/mx53loco/mx53loco.c | 12 +-
board/freescale/mx53smd/Makefile | 7 +-
board/freescale/mx6qarm2/Makefile | 7 +-
board/freescale/mx6qarm2/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/Makefile | 7 +-
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
.../spear300/config.mk => karo/tk71/Makefile} | 40 +-
board/karo/tk71/kwbimage.cfg | 174 +++++
board/karo/tk71/tk71.c | 166 +++++
board/keymile/common/common.h | 5 +
board/keymile/km_arm/Makefile | 4 +
board/keymile/km_arm/fpga_config.c | 256 +++++++
board/keymile/km_arm/km_arm.c | 152 ++--
board/keymile/km_arm/kwbimage-memphis.cfg | 2 +-
board/keymile/km_arm/kwbimage_128M16_1.cfg | 294 ++++++++
board/keymile/km_arm/kwbimage_256M8_1.cfg | 296 ++++++++
board/nvidia/common/uart-spi-switch.c | 29 +-
board/nvidia/dts/tegra2-harmony.dts | 57 ++
board/nvidia/dts/tegra2-ventana.dts | 57 ++
board/nvidia/dts/tegra2-whistler.dts | 67 ++
board/nvidia/harmony/harmony.c | 4 +-
board/nvidia/seaboard/seaboard.c | 4 +-
board/nvidia/whistler/Makefile | 48 ++
board/nvidia/whistler/whistler.c | 116 +++
board/raidsonic/ib62x0/ib62x0.c | 2 +-
board/samsung/smdk5250/smdk5250.c | 176 +----
board/samsung/trats/trats.c | 85 ++-
board/spear/common/Makefile | 2 +
board/spear/common/spr_misc.c | 102 +--
board/spear/spear300/spear300.c | 27 +-
board/spear/spear310/spear310.c | 44 +-
board/spear/spear320/spear320.c | 43 +-
board/spear/spear600/Makefile | 2 +
board/spear/spear600/config.mk | 39 -
board/spear/spear600/spear600.c | 30 +-
board/ti/am335x/evm.c | 13 +-
board/ti/omap5_evm/mux_data.h | 18 +-
board/ti/sdp4430/sdp4430_mux_data.h | 25 +-
board/ttcontrol/vision2/Makefile | 5 +-
boards.cfg | 41 +-
common/Makefile | 2 +-
common/env_mmc.c | 10 +-
config.mk | 4 +
doc/README.mx28evk | 2 +-
doc/README.spear | 54 +-
doc/README.switch_config | 25 +
doc/kwboot.1 | 84 +++
drivers/gpio/Makefile | 3 +-
drivers/gpio/at91_gpio.c | 125 +++-
drivers/gpio/spear_gpio.c | 102 +++
drivers/gpio/{tegra2_gpio.c => tegra_gpio.c} | 2 +-
drivers/i2c/designware_i2c.c | 16 +-
drivers/i2c/omap24xx_i2c.c | 46 +-
drivers/mmc/Makefile | 2 +-
drivers/mmc/{tegra2_mmc.c => tegra_mmc.c} | 4 +-
drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} | 8 +-
drivers/mtd/Makefile | 2 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsmc_nand.c | 486 +++++++++++++
drivers/mtd/nand/spr_nand.c | 124 ----
drivers/mtd/spi/winbond.c | 8 +
drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++---
drivers/net/davinci_emac.c | 8 +
drivers/net/designware.c | 126 ++--
drivers/net/designware.h | 2 +
drivers/rtc/m41t62.c | 10 +-
drivers/spi/Makefile | 2 +-
drivers/spi/kirkwood_spi.c | 64 +-
drivers/spi/{tegra2_spi.c => tegra_spi.c} | 17 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-atmel.c | 89 +++
drivers/video/exynos_fb.c | 3 -
include/common.h | 10 +
include/configs/at91sam9260ek.h | 5 +-
include/configs/at91sam9261ek.h | 5 +-
include/configs/at91sam9263ek.h | 10 +-
include/configs/at91sam9m10g45ek.h | 20 +-
include/configs/at91sam9rlek.h | 3 +-
include/configs/cm_t35.h | 5 +-
include/configs/enbw_cmc.h | 20 +-
include/configs/harmony.h | 29 +-
include/configs/imx31_phycore.h | 1 -
include/configs/km/km_arm.h | 63 +-
include/configs/km_kirkwood.h | 141 +++-
include/configs/lacie_kw.h | 6 +-
include/configs/lsxl.h | 182 +++++
include/configs/m28evk.h | 11 +-
include/configs/medcom.h | 6 +-
include/configs/mgcoge3un.h | 86 ---
include/configs/mx28evk.h | 9 +-
include/configs/mx35pdk.h | 1 -
include/configs/mx53ard.h | 2 -
include/configs/mx53evk.h | 1 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 1 -
include/configs/mx6qarm2.h | 1 -
include/configs/mx6qsabrelite.h | 1 -
include/configs/omap3_beagle.h | 4 +-
include/configs/omap3_evm.h | 4 +-
include/configs/omap4_common.h | 7 +-
include/configs/omap5_evm.h | 4 +-
include/configs/paz00.h | 34 +-
include/configs/plutux.h | 6 +-
include/configs/portl2.h | 85 ---
include/configs/seaboard.h | 35 +-
include/configs/spear-common.h | 94 ++-
include/configs/{spear3xx.h => spear3xx_evb.h} | 62 +-
include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +-
include/configs/tegra2-common-post.h | 117 +++
include/configs/tegra2-common.h | 10 +-
include/configs/tk71.h | 130 ++++
include/configs/trimslice.h | 99 +++
include/configs/ventana.h | 29 +-
include/configs/vl_ma2sc.h | 463 ++++++++++++
include/configs/whistler.h | 94 +++
include/configs/zipitz2.h | 1 +
include/linux/mtd/fsmc_nand.h | 101 +++
.../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
include/net.h | 17 +
include/netdev.h | 2 +-
lib/Makefile | 7 +-
lib/rand.c | 48 ++
net/Makefile | 2 -
net/eth.c | 22 +
net/link_local.c | 7 +-
net/net_rand.c | 68 --
net/net_rand.h | 31 +-
tools/Makefile | 6 +
tools/kwboot.c | 742
++++++++++++++++++++ 258 files changed, 11028 insertions(+), 1775
deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
create mode 100644
arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
create mode 100644
arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create
mode 100644
arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
create mode 100644
arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
create mode 100644 arch/arm/cpu/arm926ejs/spear/start.S create mode
100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds create mode 100644
arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644
arch/arm/include/asm/arch-exynos/periph.h create mode 100644
arch/arm/include/asm/arch-exynos/pinmux.h create mode 100644
arch/arm/include/asm/arch-spear/clk.h create mode 100644
arch/arm/include/asm/arch-spear/gpio.h delete mode 100644
arch/arm/include/asm/arch-spear/spr_nand.h create mode 100644
arch/arm/include/asm/arch-spear/spr_ssp.h delete mode 100644
arch/arm/include/asm/arch-spear/spr_xloader_table.h rename
arch/arm/include/asm/arch-tegra2/{tegra2_spi.h => tegra_spi.h} (95%)
rename board/{spear/spear310/config.mk => BuS/vl_ma2sc/Makefile} (54%)
create mode 100644 board/BuS/vl_ma2sc/vl_ma2sc.c rename
board/{spear/spear320/config.mk => buffalo/lsxl/Makefile} (52%) create
mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644
board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644
board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h
create mode 100644 board/compal/dts/tegra2-paz00.dts create mode
100644 board/compulab/dts/tegra2-trimslice.dts create mode 100644
board/compulab/trimslice/Makefile create mode 100644
board/compulab/trimslice/trimslice.c rename
board/{spear/spear300/config.mk => karo/tk71/Makefile} (51%) create
mode 100644 board/karo/tk71/kwbimage.cfg create mode 100644
board/karo/tk71/tk71.c create mode 100644
board/keymile/km_arm/fpga_config.c create mode 100644
board/keymile/km_arm/kwbimage_128M16_1.cfg create mode 100644
board/keymile/km_arm/kwbimage_256M8_1.cfg create mode 100644
board/nvidia/dts/tegra2-harmony.dts create mode 100644
board/nvidia/dts/tegra2-ventana.dts create mode 100644
board/nvidia/dts/tegra2-whistler.dts create mode 100644
board/nvidia/whistler/Makefile create mode 100644
board/nvidia/whistler/whistler.c delete mode 100644
board/spear/spear600/config.mk create mode 100644
doc/README.switch_config create mode 100644 doc/kwboot.1 create mode
100644 drivers/gpio/spear_gpio.c rename drivers/gpio/{tegra2_gpio.c =>
tegra_gpio.c} (99%) rename drivers/mmc/{tegra2_mmc.c => tegra_mmc.c}
(99%) rename drivers/mmc/{tegra2_mmc.h => tegra_mmc.h} (97%) create
mode 100644 drivers/mtd/nand/fsmc_nand.c delete mode 100644
drivers/mtd/nand/spr_nand.c rename drivers/mtd/{spr_smi.c => st_smi.c}
(62%) rename drivers/spi/{tegra2_spi.c => tegra_spi.c} (95%)
create mode 100644 drivers/usb/host/ehci-atmel.c
create mode 100644 include/configs/lsxl.h
delete mode 100644 include/configs/mgcoge3un.h
delete mode 100644 include/configs/portl2.h
rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
create mode 100644 include/configs/tegra2-common-post.h
create mode 100644 include/configs/tk71.h
create mode 100644 include/configs/trimslice.h
create mode 100644 include/configs/vl_ma2sc.h
create mode 100644 include/configs/whistler.h
create mode 100644 include/linux/mtd/fsmc_nand.h
rename arch/arm/include/asm/arch-spear/spr_smi.h =>
include/linux/mtd/st_smi.h (95%) create mode 100644 lib/rand.c
delete mode 100644 net/net_rand.c
create mode 100644 tools/kwboot.c
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-05-15 6:57 Albert ARIBAUD
@ 2012-05-20 20:33 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-05-20 20:33 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4FB1FE52.6060404@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 0a6deb3251a68b5be640ab1b848ca67e906b75ce:
>
> Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
> (2012-04-30 18:19:28 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:
>
> OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
> (2012-05-15 08:31:41 +0200)
>
> ----------------------------------------------------------------
> Aneesh V (6):
> arm: adapt asm/linkage.h from Linux
> armv7: add appropriate headers for assembly functions
> ARM: enable Thumb build
> armv7: Use -march=armv7-a and thereby enable Thumb-2
> omap4+: Avoid using __attribute__ ((__packed__))
> OMAP4: enable Thumb build
>
> Anton Staff (3):
> fdt: Add fdtdec functions to read byte array
> tegra: fdt: Add keyboard controller definition
> tegra: fdt: Add keyboard definitions for Seaboard
>
> Balaji T K (3):
> arm: omap5: correct boot device mode7 for eMMC
> omap5: pbias ldo9 turn on
> mmc: omap5evm: Add eMMC saveenv support
>
> Bernie Thompson (1):
> input: Add support for keyboard matrix decoding from an fdt
>
> Chander Kashyap (1):
> EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
>
> David Purdy (1):
> kirkwood: add support for Cloud Engines Pogoplug E02
>
> Dirk Behme (1):
> i.MX6: Add ANATOP regulator init
>
> Donghwa Lee (8):
> EXYNOS: definitions of system resgister and power management
> registers.
> EXYNOS: add LCD and MIPI DSI clock interface.
> LCD: add data structure for EXYNOS display driver
> EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
> EXYNOS: support EXYNOS MIPI DSI interface driver.
> LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
> EXYNOS: support TRATS board display function
> EXYNOS: Change bits per pixel value proper for u-boot.
>
> Enric Balletbo i Serra (2):
> igep00x0: enable the use of a plain text file
> igep00x0: change mpurate from 500 to auto
>
> Enric Balletb? i Serra (1):
> OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
>
> Eric Nelson (3):
> i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
> i.MX6: add enable_sata_clock()
> i.MX6: mx6q_sabrelite: add SATA bindings
>
> Fabio Estevam (19):
> pmic: Add support for the Dialog DA9053 PMIC
> mx6qsabrelite: No need to set the direction for GPIO3_23 again
> mx28evk: Allow to booting a dt kernel
> m28evk: Allow to booting a dt kernel
> mx28evk: Allow booting a zImage kernel
> mx6qsabrelite: Allow booting a zImage kernel
> mx6qarm2: Allow booting a zImage kernel
> mx31pdk: Allow booting a zImage kernel
> imx-common: Factor out get_ahb_clk()
> mx5: Add clock config interface
> mx53loco: Allow to print CPU information at a later stage
> mx53loco: Add support for 1GHz operation for DA9053-based boards
> pmic: dialog: Avoid name conflicts
> mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
> mx53loco: Turn on VUSB regulator
> mx53loco: Add CONFIG_REVISION_TAG
> mx53loco: Remove unneeded gpio_set_value()
> spi: mxs: Introduce spi_cs_is_valid()
> spi: mxs: Allow other chip selects to work
>
> Grazvydas Ignotas (3):
> OMAP3: pandora: pin mux updates for DM3730 board variant
> OMAP3: pandora: revise GPIO configuration
> OMAP3: pandora: drop console kernel argument
>
> Ian Campbell (1):
> ARM: dreamplug: Enable FDT support
>
> Jaehoon Chung (1):
> TRATS: modify the trats's configuration
>
> Jimmy Zhang (3):
> tegra: Add EMC support for optimal memory timings
> tegra: Add PMU to manage power supplies
> tegra: Add EMC settings for Seaboard
>
> Jon Hunter (1):
> OMAP4: Set fdt_high for OMAP4 devices to enable booting with
> Device Tree
>
> Jonathan Solnit (1):
> ARM:OMAP+:MMC: Add parameters to MMC init
>
> Lauri Hintsala (1):
> mx28evk: add NAND support
>
> Lucas Stach (1):
> tegra2: trivially enable 13 mhz crystal frequency
>
> Luka Perkov (1):
> kirkwood: add NAS62x0 board support
>
> Marek Vasut (17):
> M28: Enable FDT support
> Revert "i.MX28: Enable additional DRAM address bits"
> M28: Scan only first 512 MB of DRAM to avoid memory wraparound
> i.MX28: Add delay after CPU bypass is cleared
> FEC: Abstract out register setup
> M28EVK: Implement support for new board V2.0
> M28EVK: Add SD update command
> i.MX28: Improve passing of data from SPL to U-Boot
> i.MX28: Implement boot pads sampling and reporting
> i.MX28: Add LCDIF register definitions
> i.MX28: Shut down the LCD controller before reset
> i.MX28: Add LRADC register definitions
> i.MX28: Add LRADC init to i.MX28 SPL
> i.MX28: Reorder battery status functions in SPL
> i.MX28: Add battery boot components to SPL
> i.MX28: Check if WP detection is implemented at all
> i.MX28: Avoid redefining serial_put[cs]()
>
> Matt Porter (1):
> arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
>
> Minkyu Kang (1):
> SMDK5250: fix compiler warning
>
> Nikita Kiryanov (1):
> cm-t35: add I2C multi-bus support
>
> Nishanth Menon (3):
> OMAP3+: Introduce generic logic for OMAP voltage controller
> OMAP4460: TPS Ensure SET1 is selected after voltage configuration
> OMAP4: scale voltage of core before MPU scales
>
> Nobuhiro Iwamatsu (2):
> arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to
> CONFIG_BOARD_LATE_INIT
> arm: ea20: Change macro from BOARD_LATE_INIT to
> CONFIG_BOARD_LATE_INIT
>
> Rakesh Iyer (1):
> tegra: Add tegra keyboard driver
>
> SRICHARAN R (17):
> OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
> OMAP5: board: Add pinmux data for omap5_evm board.
> OMAP5: io: Configure the io settings for omap5430 sevm board.
> OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
> OMAP5: palmas: Configure nominal opp vdd values
> OMAP5: hwinit: Add the missing break statement
> OMAP4/5: Make the silicon revision variable common.
> OMAP5: SRAM: Change the SRAM base address.
> OMAP4/5: Make the sysctrl structure common
> OMAP4/5: device: Add support to get the device type.
> OMAP5: defconfig: Align the defconfig for 5430 ES1.0
> OMAP5: ddr: Change the ddr device name.
> OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
> power: twl6035: add palmas PMIC support
> OMAP3+: reset: Create a common reset layer.
> OMAP5: reset: Use cold reset in case of 5430ES1.0
> OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
>
> Simon Glass (19):
> fdt: Add function to locate an array in the device tree
> fdt: Add function to return next compatible subnode
> Add abs() macro to return absolute value
> i2c: Add TPS6586X driver
> tegra: Move ap20.h header into arch location
> tegra: Add functions to access low-level Osc/PLL details
> tegra: Add tegra_get_chip_type() to detect SKU
> tegra: Add header file for APB_MISC register
> tegra: Set up PMU for Nvidia boards
> tegra: Set up warmboot code on Nvidia boards
> fdt: tegra: Add EMC node to device tree
> tegra: i2c: Add function to find DVC bus
> tegra: fdt: Add EMC data for Tegra2 Seaboard
> tegra: Enable LP0 on Seaboard
> input: Add linux/input.h for key code support
> input: Add generic keyboard input handler
> tegra: Add keyboard support to funcmux
> tegra: Switch on console mux and use environment for console
> tegra: Enable keyboard for Seaboard
>
> Stefano Babic (9):
> Define UART4 and UART5 base addresses
> NET: fec_mxc.c: Add a way to disable auto negotiation
> MX5: Add definitions for SATA controller
> SATA: check for return value from sata functions
> MX53: add function to set SATA clock to internal
> SATA: add driver for MX5 / MX6 SOCs
> MX53: Add support to ESG ima3 board
> MX53: mx53loco: Add SATA support
> MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
>
> Tero Kristo (3):
> omap4: panda: disable uart2 pads during boot
> omap4: do not enable fs-usb module
> omap4: do not enable auxiliary cores
>
> Timo Ketola (7):
> i.MX25: esdhc: Add mxc_get_clock infrastructure
> i.MX25: This architecture has a GPIO4 too
> imx: nand: Support flash based BBT
> i.MX25: usb: Set PORTSCx register
> imx: usb: There is no such register
> i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
> imx: Add u-boot.imx as target for ARM9 i.MX SOCs
>
> Tom Rini (11):
> tools, config.mk: Add gcc-version.sh, cc-version test from Linux
> Makefile: Add a 'checkthumb' rule
> omap4: Remove CONFIG_SYS_MMC_SET_DEV
> omap4+: Remove CONFIG_ARCH_CPU_INIT
> omap5912osk: Remove empty misc_init_r
> omap730p2: Remove empty misc_init_r
> omap3: Introduce weak misc_init_r
> include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
> include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
> ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
> ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
>
> Vladimir Zapolskiy (3):
> arm926ejs: add NXP LPC32x0 cpu series support
> serial: add LPC32X0 high-speed UART devices support
> devkit3250: add Timll DevKit3250 board initial support
>
> Wei Ni (1):
> tegra: Turn off power detect in board init
>
> Wolfgang Grandegger (1):
> USB: ehci-mx6: Fix broken IO access
>
> Yen Lin (5):
> Add AES crypto library
> tegra: Add crypto library for warmboot code
> tegra: Add flow, gp_padctl, fuse, sdram headers
> tegra: Add warmboot implementation
> tegra: Setup PMC scratch info from ap20 setup
>
> ?ukasz Majewski (3):
> ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC
> measurement
> misc:pmic:max8997 MAX8997 support for PMIC driver
> misc:pmic:samsung Convert TRATS target to use MAX8997 instead of
> MAX8998
>
> MAINTAINERS | 24 +-
> Makefile | 7 +
> README | 8 +
> arch/arm/config.mk | 27 +-
> arch/arm/cpu/arm926ejs/config.mk | 6 +
> arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 +
> arch/arm/cpu/arm926ejs/lpc32xx/clk.c | 117 +++
> arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 70 ++
> arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 52 ++
> arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 95 ++
> arch/arm/cpu/arm926ejs/mx25/generic.c | 27 +
> arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 29 +-
> arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 4 +
> arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 ++
> arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c | 86 ++
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 14 +-
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 224 +++--
> arch/arm/cpu/armv7/am33xx/board.c | 2 +-
> arch/arm/cpu/armv7/config.mk | 7 +-
> arch/arm/cpu/armv7/exynos/Makefile | 2 +-
> arch/arm/cpu/armv7/exynos/clock.c | 184 ++++
> arch/arm/cpu/armv7/exynos/power.c | 54 ++
> arch/arm/cpu/armv7/exynos/system.c | 48 +
> arch/arm/cpu/armv7/imx-common/cpu.c | 15 +-
> arch/arm/cpu/armv7/mx5/clock.c | 493 +++++++++-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/mx6/clock.c | 50 +-
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/mx6/soc.c | 30 +
> arch/arm/cpu/armv7/omap-common/Makefile | 1 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 41 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
> .../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 1 +
> arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
> arch/arm/cpu/armv7/omap-common/vc.c | 138 +++
> arch/arm/cpu/armv7/omap3/board.c | 12 +
> arch/arm/cpu/armv7/omap3/clock.c | 16 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
> arch/arm/cpu/armv7/omap4/clocks.c | 85 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
> arch/arm/cpu/armv7/omap5/Makefile | 2 +-
> arch/arm/cpu/armv7/omap5/clocks.c | 143 ++-
> arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++-
> .../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +-
> arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
> arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
> arch/arm/cpu/armv7/start.S | 13 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 4 +
> arch/arm/cpu/armv7/tegra2/ap20.c | 44 +-
> arch/arm/cpu/armv7/tegra2/board.c | 4 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 37 +-
> arch/arm/cpu/armv7/tegra2/crypto.c | 230 +++++
> arch/arm/cpu/armv7/tegra2/crypto.h | 36 +
> arch/arm/cpu/armv7/tegra2/emc.c | 286 ++++++
> arch/arm/cpu/armv7/tegra2/funcmux.c | 16 +
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/tegra2/pmu.c | 70 ++
> arch/arm/cpu/armv7/tegra2/warmboot.c | 386 ++++++++
> arch/arm/cpu/armv7/tegra2/warmboot_avp.c | 250 +++++
> arch/arm/cpu/armv7/tegra2/warmboot_avp.h | 81 ++
> arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
> arch/arm/dts/tegra20.dtsi | 11 +
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-exynos/clk.h | 3 +
> arch/arm/include/asm/arch-exynos/cpu.h | 5 +
> arch/arm/include/asm/arch-exynos/dsim.h | 181 ++++
> arch/arm/include/asm/arch-exynos/fb.h | 446 +++++++++
> arch/arm/include/asm/arch-exynos/mipi_dsim.h | 380 ++++++++
> arch/arm/include/asm/arch-exynos/power.h | 6 +
> arch/arm/include/asm/arch-exynos/system.h | 53 ++
> arch/arm/include/asm/arch-exynos/tzpc.h | 2 +-
> arch/arm/include/asm/arch-lpc32xx/clk.h | 170 ++++
> arch/arm/include/asm/arch-lpc32xx/config.h | 76 ++
> arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 ++
> arch/arm/include/asm/arch-lpc32xx/emc.h | 92 ++
> arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 +
> arch/arm/include/asm/arch-lpc32xx/timer.h | 74 ++
> arch/arm/include/asm/arch-lpc32xx/uart.h | 114 +++
> arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++
> arch/arm/include/asm/arch-mx25/clock.h | 23 +
> arch/arm/include/asm/arch-mx25/imx-regs.h | 3 +
> arch/arm/include/asm/arch-mx28/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx28/regs-lcdif.h | 212 +++++
> arch/arm/include/asm/arch-mx28/regs-lradc.h | 400 ++++++++
> arch/arm/include/asm/arch-mx28/sys_proto.h | 30 +
> arch/arm/include/asm/arch-mx5/clock.h | 7 +-
> arch/arm/include/asm/arch-mx5/crm_regs.h | 6 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 11 +
> arch/arm/include/asm/arch-mx5/iomux.h | 4 +-
> arch/arm/include/asm/arch-mx5/sys_proto.h | 3 +
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> .../asm/arch-mx6/{ccm_regs.h => crm_regs.h} | 2 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 111 +++
> arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
> arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
> arch/arm/include/asm/arch-omap3/mux.h | 6 +
> arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
> arch/arm/include/asm/arch-omap4/cpu.h | 11 +
> arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 25 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 52 +-
> arch/arm/include/asm/arch-omap5/cpu.h | 11 +
> arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 +++++-----
> arch/arm/include/asm/arch-omap5/omap.h | 153 +++-
> arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
> .../tegra2 => include/asm/arch-tegra2}/ap20.h | 7 +
> arch/arm/include/asm/arch-tegra2/apb_misc.h | 36 +
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 3 +
> arch/arm/include/asm/arch-tegra2/clock.h | 22 +
> arch/arm/include/asm/arch-tegra2/emc.h | 113 +++
> arch/arm/include/asm/arch-tegra2/flow.h | 36 +
> arch/arm/include/asm/arch-tegra2/fuse.h | 39 +
> arch/arm/include/asm/arch-tegra2/gp_padctrl.h | 73 ++
> arch/arm/include/asm/arch-tegra2/pmu.h | 30 +
> arch/arm/include/asm/arch-tegra2/sdram_param.h | 148 +++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 25 +
> arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 7 +
> arch/arm/include/asm/arch-tegra2/warmboot.h | 150 +++
> arch/arm/include/asm/emif.h | 76 +-
> arch/arm/include/asm/linkage.h | 7 +
> arch/arm/include/asm/omap_common.h | 11 +-
> board/cloudengines/pogo_e02/Makefile | 43 +
> board/cloudengines/pogo_e02/kwbimage.cfg | 169 ++++
> board/cloudengines/pogo_e02/pogo_e02.c | 118 +++
> board/cloudengines/pogo_e02/pogo_e02.h | 44 +
> board/cm_t35/cm_t35.c | 19 +-
> board/comelit/dig297/dig297.c | 2 +-
> board/corscience/tricorder/tricorder.c | 2 +-
> board/davinci/ea20/ea20.c | 4 +-
> board/denx/m28evk/m28evk.c | 20 +-
> board/denx/m28evk/spl_boot.c | 8 +-
> board/esg/ima3-mx53/Makefile | 41 +
> board/esg/ima3-mx53/ima3-mx53.c | 302 ++++++
> board/esg/ima3-mx53/imximage.cfg | 108 +++
> board/freescale/mx28evk/iomux.c | 21 +
> board/freescale/mx53loco/mx53loco.c | 146 ++-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 155 +++-
> board/htkw/mcx/mcx.c | 13 +-
> board/isee/igep0020/igep0020.c | 4 +-
> board/isee/igep0030/igep0030.c | 4 +-
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/omap3som/omap3logic.c | 13 +-
> board/logicpd/zoom1/zoom1.c | 2 +-
> board/logicpd/zoom2/zoom2.c | 2 +-
> board/matrix_vision/mvblx/mvblx.c | 4 +-
> board/nvidia/common/Makefile | 1 +
> board/nvidia/common/board.c | 42 +-
> board/nvidia/common/emc.c | 53 ++
> board/nvidia/common/emc.h | 29 +
> board/nvidia/dts/tegra2-seaboard.dts | 64 ++
> board/overo/overo.c | 2 +-
> board/pandora/pandora.c | 59 +-
> board/pandora/pandora.h | 6 +
> board/raidsonic/ib62x0/Makefile | 43 +
> board/raidsonic/ib62x0/ib62x0.c | 79 ++
> board/raidsonic/ib62x0/ib62x0.h | 40 +
> board/raidsonic/ib62x0/kwbimage.cfg | 169 ++++
> board/samsung/smdk5250/tzpc_init.c | 4 +-
> board/samsung/trats/trats.c | 173 +++-
> board/samsung/universal_c210/universal.c | 25 +-
> board/technexion/twister/twister.c | 2 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 9 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/beagle/beagle.c | 2 +-
> board/ti/evm/evm.c | 2 +-
> board/ti/omap5912osk/omap5912osk.c | 7 -
> board/ti/omap5_evm/evm.c | 10 +-
> board/ti/omap5_evm/mux_data.h | 489 +++++-----
> board/ti/omap730p2/omap730p2.c | 6 -
> board/ti/panda/panda.c | 2 +-
> board/ti/panda/panda_mux_data.h | 10 +-
> board/ti/sdp3430/sdp.c | 2 +-
> board/ti/sdp4430/sdp.c | 4 +-
> board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
> board/timll/devkit3250/Makefile | 44 +
> board/timll/devkit3250/devkit3250.c | 65 ++
> board/timll/devkit8000/devkit8000.c | 2 +-
> boards.cfg | 8 +-
> common/cmd_sata.c | 9 +-
> config.mk | 6 +-
> doc/SPL/README.omap3 | 4 +-
> drivers/bios_emulator/x86emu/prim_ops.c | 5 -
> drivers/block/Makefile | 1 +
> drivers/block/dwc_ahsata.c | 969
> ++++++++++++++++++++
> drivers/block/dwc_ahsata.h | 335 +++++++
> drivers/gpio/mxc_gpio.c | 3 +-
> drivers/i2c/tegra_i2c.c | 14 +
> drivers/input/Makefile | 3 +
> drivers/input/input.c | 430 +++++++++
> drivers/input/key_matrix.c | 208 +++++
> drivers/input/tegra-kbc.c | 375 ++++++++
> drivers/misc/Makefile | 2 +
> drivers/misc/pmic_dialog.c | 37 +
> drivers/misc/pmic_max8997.c | 43 +
> drivers/mmc/mxsmmc.c | 3 +-
> drivers/mmc/omap_hsmmc.c | 61 +-
> drivers/mtd/nand/mxc_nand.c | 33 +
> drivers/net/fec_mxc.c | 88 +-
> drivers/power/Makefile | 2 +
> drivers/power/tps6586x.c | 280 ++++++
> drivers/power/twl6035.c | 65 ++
> drivers/serial/Makefile | 1 +
> drivers/serial/lpc32xx_hsuart.c | 112 +++
> drivers/spi/mxs_spi.c | 23 +-
> drivers/usb/host/ehci-mx6.c | 5 +-
> drivers/usb/host/ehci-mxc.c | 4 -
> drivers/video/Makefile | 4 +
> drivers/video/exynos_fb.c | 128 +++
> drivers/video/exynos_fb.h | 61 ++
> drivers/video/exynos_fimd.c | 354 +++++++
> drivers/video/exynos_mipi_dsi.c | 253 +++++
> drivers/video/exynos_mipi_dsi_common.c | 637 +++++++++++++
> drivers/video/exynos_mipi_dsi_common.h | 48 +
> drivers/video/exynos_mipi_dsi_lowlevel.c | 652 +++++++++++++
> drivers/video/exynos_mipi_dsi_lowlevel.h | 111 +++
> drivers/video/s6e8ax0.c | 256 ++++++
> include/aes.h | 70 ++
> include/ahci.h | 5 +-
> include/common.h | 25 +
> include/configs/P1023RDS.h | 3 -
> include/configs/P2020COME.h | 2 -
> include/configs/am3517_crane.h | 3 +-
> include/configs/am3517_evm.h | 4 +-
> include/configs/at91sam9263ek.h | 2 -
> include/configs/cam_enc_4xx.h | 2 +-
> include/configs/cm_t35.h | 1 +
> include/configs/da830evm.h | 1 -
> include/configs/devkit3250.h | 117 +++
> include/configs/devkit8000.h | 2 +-
> include/configs/dreamplug.h | 2 +
> include/configs/ea20.h | 3 +-
> include/configs/eb_cpux9k2.h | 2 -
> include/configs/flea3.h | 2 -
> include/configs/hawkboard.h | 1 -
> include/configs/ib62x0.h | 152 +++
> include/configs/igep0030.h | 261 ------
> include/configs/{igep0020.h => igep00x0.h} | 45 +-
> include/configs/ima3-mx53.h | 269 ++++++
> include/configs/imx27lite-common.h | 1 -
> include/configs/m28evk.h | 15 +-
> include/configs/mcx.h | 4 +-
> include/configs/meesc.h | 1 -
> include/configs/mv-common.h | 1 -
> include/configs/mx25pdk.h | 1 -
> include/configs/mx28evk.h | 13 +
> include/configs/mx31pdk.h | 1 +
> include/configs/mx35pdk.h | 2 -
> include/configs/mx53loco.h | 29 +-
> include/configs/mx6qarm2.h | 1 +
> include/configs/mx6qsabrelite.h | 17 +
> include/configs/omap3_beagle.h | 3 +-
> include/configs/omap3_evm_common.h | 3 +-
> include/configs/omap3_overo.h | 3 +-
> include/configs/omap3_pandora.h | 3 +-
> include/configs/omap4_common.h | 5 +-
> include/configs/omap5912osk.h | 2 -
> include/configs/omap5_evm.h | 26 +-
> include/configs/omap730p2.h | 2 -
> include/configs/otc570.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 3 -
> include/configs/pogo_e02.h | 119 +++
> include/configs/seaboard.h | 16 +
> include/configs/spear-common.h | 1 -
> include/configs/tam3517-common.h | 3 +-
> include/configs/tegra2-common.h | 26 +-
> include/configs/trats.h | 15 +-
> include/configs/tricorder.h | 3 +-
> include/configs/tx25.h | 2 -
> include/configs/zmx25.h | 2 -
> include/dialog_pmic.h | 187 ++++
> include/fdtdec.h | 71 ++
> include/fsl_pmic.h | 11 +
> include/input.h | 147 +++
> include/key_matrix.h | 99 ++
> include/lcd.h | 64 ++
> include/linux/input.h | 155 ++++
> include/linux/linkage.h | 7 +-
> include/max8997_pmic.h | 190 ++++
> include/max8998_pmic.h | 1 +
> include/pmic.h | 1 +
> include/tegra-kbc.h | 33 +
> include/tps6586x.h | 68 ++
> include/twl6035.h | 42 +
> lib/Makefile | 1 +
> lib/aes.c | 598 ++++++++++++
> lib/fdtdec.c | 53 ++
> tools/gcc-version.sh | 32 +
> 297 files changed, 18126 insertions(+), 1594 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clk.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c
> create mode 100644 arch/arm/cpu/armv7/exynos/power.c
> create mode 100644 arch/arm/cpu/armv7/exynos/system.c
> rename arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
> create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
> rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
> create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.h
> create mode 100644 arch/arm/cpu/armv7/tegra2/emc.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/pmu.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.h
> create mode 100644 arch/arm/include/asm/arch-exynos/dsim.h
> create mode 100644 arch/arm/include/asm/arch-exynos/fb.h
> create mode 100644 arch/arm/include/asm/arch-exynos/mipi_dsim.h
> create mode 100644 arch/arm/include/asm/arch-exynos/system.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-lcdif.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-lradc.h
> rename arch/arm/include/asm/arch-mx6/{ccm_regs.h => crm_regs.h} (99%)
> rename arch/arm/{cpu/armv7/tegra2 => include/asm/arch-tegra2}/ap20.h (96%)
> create mode 100644 arch/arm/include/asm/arch-tegra2/apb_misc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/emc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/flow.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/fuse.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/gp_padctrl.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/pmu.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/sdram_param.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/warmboot.h
> create mode 100644 arch/arm/include/asm/linkage.h
> create mode 100644 board/cloudengines/pogo_e02/Makefile
> create mode 100644 board/cloudengines/pogo_e02/kwbimage.cfg
> create mode 100644 board/cloudengines/pogo_e02/pogo_e02.c
> create mode 100644 board/cloudengines/pogo_e02/pogo_e02.h
> create mode 100644 board/esg/ima3-mx53/Makefile
> create mode 100644 board/esg/ima3-mx53/ima3-mx53.c
> create mode 100644 board/esg/ima3-mx53/imximage.cfg
> create mode 100644 board/nvidia/common/emc.c
> create mode 100644 board/nvidia/common/emc.h
> create mode 100644 board/raidsonic/ib62x0/Makefile
> create mode 100644 board/raidsonic/ib62x0/ib62x0.c
> create mode 100644 board/raidsonic/ib62x0/ib62x0.h
> create mode 100644 board/raidsonic/ib62x0/kwbimage.cfg
> create mode 100644 board/timll/devkit3250/Makefile
> create mode 100644 board/timll/devkit3250/devkit3250.c
> create mode 100644 drivers/block/dwc_ahsata.c
> create mode 100644 drivers/block/dwc_ahsata.h
> create mode 100644 drivers/input/input.c
> create mode 100644 drivers/input/key_matrix.c
> create mode 100644 drivers/input/tegra-kbc.c
> create mode 100644 drivers/misc/pmic_dialog.c
> create mode 100644 drivers/misc/pmic_max8997.c
> create mode 100644 drivers/power/tps6586x.c
> create mode 100644 drivers/power/twl6035.c
> create mode 100644 drivers/serial/lpc32xx_hsuart.c
> create mode 100644 drivers/video/exynos_fb.c
> create mode 100644 drivers/video/exynos_fb.h
> create mode 100644 drivers/video/exynos_fimd.c
> create mode 100644 drivers/video/exynos_mipi_dsi.c
> create mode 100644 drivers/video/exynos_mipi_dsi_common.c
> create mode 100644 drivers/video/exynos_mipi_dsi_common.h
> create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.c
> create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.h
> create mode 100644 drivers/video/s6e8ax0.c
> create mode 100644 include/aes.h
> create mode 100644 include/configs/devkit3250.h
> create mode 100644 include/configs/ib62x0.h
> delete mode 100644 include/configs/igep0030.h
> rename include/configs/{igep0020.h => igep00x0.h} (91%)
> create mode 100644 include/configs/ima3-mx53.h
> create mode 100644 include/configs/pogo_e02.h
> create mode 100644 include/dialog_pmic.h
> create mode 100644 include/input.h
> create mode 100644 include/key_matrix.h
> create mode 100644 include/linux/input.h
> create mode 100644 include/max8997_pmic.h
> create mode 100644 include/tegra-kbc.h
> create mode 100644 include/tps6586x.h
> create mode 100644 include/twl6035.h
> create mode 100644 lib/aes.c
> create mode 100755 tools/gcc-version.sh
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If you can, help others. If you can't, at least don't hurt others."
- the Dalai Lama
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-05-15 6:57 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 0a6deb3251a68b5be640ab1b848ca67e906b75ce:
Merge branch 'agust at denx.de' of git://git.denx.de/u-boot-staging
(2012-04-30 18:19:28 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:
OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
(2012-05-15 08:31:41 +0200)
----------------------------------------------------------------
Aneesh V (6):
arm: adapt asm/linkage.h from Linux
armv7: add appropriate headers for assembly functions
ARM: enable Thumb build
armv7: Use -march=armv7-a and thereby enable Thumb-2
omap4+: Avoid using __attribute__ ((__packed__))
OMAP4: enable Thumb build
Anton Staff (3):
fdt: Add fdtdec functions to read byte array
tegra: fdt: Add keyboard controller definition
tegra: fdt: Add keyboard definitions for Seaboard
Balaji T K (3):
arm: omap5: correct boot device mode7 for eMMC
omap5: pbias ldo9 turn on
mmc: omap5evm: Add eMMC saveenv support
Bernie Thompson (1):
input: Add support for keyboard matrix decoding from an fdt
Chander Kashyap (1):
EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
David Purdy (1):
kirkwood: add support for Cloud Engines Pogoplug E02
Dirk Behme (1):
i.MX6: Add ANATOP regulator init
Donghwa Lee (8):
EXYNOS: definitions of system resgister and power management
registers.
EXYNOS: add LCD and MIPI DSI clock interface.
LCD: add data structure for EXYNOS display driver
EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
EXYNOS: support EXYNOS MIPI DSI interface driver.
LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
EXYNOS: support TRATS board display function
EXYNOS: Change bits per pixel value proper for u-boot.
Enric Balletbo i Serra (2):
igep00x0: enable the use of a plain text file
igep00x0: change mpurate from 500 to auto
Enric Balletb? i Serra (1):
OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
Eric Nelson (3):
i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
i.MX6: add enable_sata_clock()
i.MX6: mx6q_sabrelite: add SATA bindings
Fabio Estevam (19):
pmic: Add support for the Dialog DA9053 PMIC
mx6qsabrelite: No need to set the direction for GPIO3_23 again
mx28evk: Allow to booting a dt kernel
m28evk: Allow to booting a dt kernel
mx28evk: Allow booting a zImage kernel
mx6qsabrelite: Allow booting a zImage kernel
mx6qarm2: Allow booting a zImage kernel
mx31pdk: Allow booting a zImage kernel
imx-common: Factor out get_ahb_clk()
mx5: Add clock config interface
mx53loco: Allow to print CPU information at a later stage
mx53loco: Add support for 1GHz operation for DA9053-based boards
pmic: dialog: Avoid name conflicts
mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
mx53loco: Turn on VUSB regulator
mx53loco: Add CONFIG_REVISION_TAG
mx53loco: Remove unneeded gpio_set_value()
spi: mxs: Introduce spi_cs_is_valid()
spi: mxs: Allow other chip selects to work
Grazvydas Ignotas (3):
OMAP3: pandora: pin mux updates for DM3730 board variant
OMAP3: pandora: revise GPIO configuration
OMAP3: pandora: drop console kernel argument
Ian Campbell (1):
ARM: dreamplug: Enable FDT support
Jaehoon Chung (1):
TRATS: modify the trats's configuration
Jimmy Zhang (3):
tegra: Add EMC support for optimal memory timings
tegra: Add PMU to manage power supplies
tegra: Add EMC settings for Seaboard
Jon Hunter (1):
OMAP4: Set fdt_high for OMAP4 devices to enable booting with
Device Tree
Jonathan Solnit (1):
ARM:OMAP+:MMC: Add parameters to MMC init
Lauri Hintsala (1):
mx28evk: add NAND support
Lucas Stach (1):
tegra2: trivially enable 13 mhz crystal frequency
Luka Perkov (1):
kirkwood: add NAS62x0 board support
Marek Vasut (17):
M28: Enable FDT support
Revert "i.MX28: Enable additional DRAM address bits"
M28: Scan only first 512 MB of DRAM to avoid memory wraparound
i.MX28: Add delay after CPU bypass is cleared
FEC: Abstract out register setup
M28EVK: Implement support for new board V2.0
M28EVK: Add SD update command
i.MX28: Improve passing of data from SPL to U-Boot
i.MX28: Implement boot pads sampling and reporting
i.MX28: Add LCDIF register definitions
i.MX28: Shut down the LCD controller before reset
i.MX28: Add LRADC register definitions
i.MX28: Add LRADC init to i.MX28 SPL
i.MX28: Reorder battery status functions in SPL
i.MX28: Add battery boot components to SPL
i.MX28: Check if WP detection is implemented at all
i.MX28: Avoid redefining serial_put[cs]()
Matt Porter (1):
arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
Minkyu Kang (1):
SMDK5250: fix compiler warning
Nikita Kiryanov (1):
cm-t35: add I2C multi-bus support
Nishanth Menon (3):
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
OMAP4: scale voltage of core before MPU scales
Nobuhiro Iwamatsu (2):
arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to
CONFIG_BOARD_LATE_INIT
arm: ea20: Change macro from BOARD_LATE_INIT to
CONFIG_BOARD_LATE_INIT
Rakesh Iyer (1):
tegra: Add tegra keyboard driver
SRICHARAN R (17):
OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
OMAP5: board: Add pinmux data for omap5_evm board.
OMAP5: io: Configure the io settings for omap5430 sevm board.
OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
OMAP5: palmas: Configure nominal opp vdd values
OMAP5: hwinit: Add the missing break statement
OMAP4/5: Make the silicon revision variable common.
OMAP5: SRAM: Change the SRAM base address.
OMAP4/5: Make the sysctrl structure common
OMAP4/5: device: Add support to get the device type.
OMAP5: defconfig: Align the defconfig for 5430 ES1.0
OMAP5: ddr: Change the ddr device name.
OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
power: twl6035: add palmas PMIC support
OMAP3+: reset: Create a common reset layer.
OMAP5: reset: Use cold reset in case of 5430ES1.0
OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
Simon Glass (19):
fdt: Add function to locate an array in the device tree
fdt: Add function to return next compatible subnode
Add abs() macro to return absolute value
i2c: Add TPS6586X driver
tegra: Move ap20.h header into arch location
tegra: Add functions to access low-level Osc/PLL details
tegra: Add tegra_get_chip_type() to detect SKU
tegra: Add header file for APB_MISC register
tegra: Set up PMU for Nvidia boards
tegra: Set up warmboot code on Nvidia boards
fdt: tegra: Add EMC node to device tree
tegra: i2c: Add function to find DVC bus
tegra: fdt: Add EMC data for Tegra2 Seaboard
tegra: Enable LP0 on Seaboard
input: Add linux/input.h for key code support
input: Add generic keyboard input handler
tegra: Add keyboard support to funcmux
tegra: Switch on console mux and use environment for console
tegra: Enable keyboard for Seaboard
Stefano Babic (9):
Define UART4 and UART5 base addresses
NET: fec_mxc.c: Add a way to disable auto negotiation
MX5: Add definitions for SATA controller
SATA: check for return value from sata functions
MX53: add function to set SATA clock to internal
SATA: add driver for MX5 / MX6 SOCs
MX53: Add support to ESG ima3 board
MX53: mx53loco: Add SATA support
MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
Tero Kristo (3):
omap4: panda: disable uart2 pads during boot
omap4: do not enable fs-usb module
omap4: do not enable auxiliary cores
Timo Ketola (7):
i.MX25: esdhc: Add mxc_get_clock infrastructure
i.MX25: This architecture has a GPIO4 too
imx: nand: Support flash based BBT
i.MX25: usb: Set PORTSCx register
imx: usb: There is no such register
i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
imx: Add u-boot.imx as target for ARM9 i.MX SOCs
Tom Rini (11):
tools, config.mk: Add gcc-version.sh, cc-version test from Linux
Makefile: Add a 'checkthumb' rule
omap4: Remove CONFIG_SYS_MMC_SET_DEV
omap4+: Remove CONFIG_ARCH_CPU_INIT
omap5912osk: Remove empty misc_init_r
omap730p2: Remove empty misc_init_r
omap3: Introduce weak misc_init_r
include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
Vladimir Zapolskiy (3):
arm926ejs: add NXP LPC32x0 cpu series support
serial: add LPC32X0 high-speed UART devices support
devkit3250: add Timll DevKit3250 board initial support
Wei Ni (1):
tegra: Turn off power detect in board init
Wolfgang Grandegger (1):
USB: ehci-mx6: Fix broken IO access
Yen Lin (5):
Add AES crypto library
tegra: Add crypto library for warmboot code
tegra: Add flow, gp_padctl, fuse, sdram headers
tegra: Add warmboot implementation
tegra: Setup PMC scratch info from ap20 setup
?ukasz Majewski (3):
ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC
measurement
misc:pmic:max8997 MAX8997 support for PMIC driver
misc:pmic:samsung Convert TRATS target to use MAX8997 instead of
MAX8998
MAINTAINERS | 24 +-
Makefile | 7 +
README | 8 +
arch/arm/config.mk | 27 +-
arch/arm/cpu/arm926ejs/config.mk | 6 +
arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 +
arch/arm/cpu/arm926ejs/lpc32xx/clk.c | 117 +++
arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 70 ++
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 52 ++
arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 95 ++
arch/arm/cpu/arm926ejs/mx25/generic.c | 27 +
arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 29 +-
arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 4 +
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 ++
arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c | 86 ++
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 14 +-
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 224 +++--
arch/arm/cpu/armv7/am33xx/board.c | 2 +-
arch/arm/cpu/armv7/config.mk | 7 +-
arch/arm/cpu/armv7/exynos/Makefile | 2 +-
arch/arm/cpu/armv7/exynos/clock.c | 184 ++++
arch/arm/cpu/armv7/exynos/power.c | 54 ++
arch/arm/cpu/armv7/exynos/system.c | 48 +
arch/arm/cpu/armv7/imx-common/cpu.c | 15 +-
arch/arm/cpu/armv7/mx5/clock.c | 493 +++++++++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/clock.c | 50 +-
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/mx6/soc.c | 30 +
arch/arm/cpu/armv7/omap-common/Makefile | 1 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 41 +-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +-
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
.../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
arch/arm/cpu/armv7/omap-common/spl.c | 1 +
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
arch/arm/cpu/armv7/omap-common/vc.c | 138 +++
arch/arm/cpu/armv7/omap3/board.c | 12 +
arch/arm/cpu/armv7/omap3/clock.c | 16 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
arch/arm/cpu/armv7/omap4/clocks.c | 85 +-
arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
arch/arm/cpu/armv7/omap5/Makefile | 2 +-
arch/arm/cpu/armv7/omap5/clocks.c | 143 ++-
arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++-
.../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +-
arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
arch/arm/cpu/armv7/start.S | 13 +-
arch/arm/cpu/armv7/tegra2/Makefile | 4 +
arch/arm/cpu/armv7/tegra2/ap20.c | 44 +-
arch/arm/cpu/armv7/tegra2/board.c | 4 +-
arch/arm/cpu/armv7/tegra2/clock.c | 37 +-
arch/arm/cpu/armv7/tegra2/crypto.c | 230 +++++
arch/arm/cpu/armv7/tegra2/crypto.h | 36 +
arch/arm/cpu/armv7/tegra2/emc.c | 286 ++++++
arch/arm/cpu/armv7/tegra2/funcmux.c | 16 +
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
arch/arm/cpu/armv7/tegra2/pmu.c | 70 ++
arch/arm/cpu/armv7/tegra2/warmboot.c | 386 ++++++++
arch/arm/cpu/armv7/tegra2/warmboot_avp.c | 250 +++++
arch/arm/cpu/armv7/tegra2/warmboot_avp.h | 81 ++
arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
arch/arm/dts/tegra20.dtsi | 11 +
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-exynos/clk.h | 3 +
arch/arm/include/asm/arch-exynos/cpu.h | 5 +
arch/arm/include/asm/arch-exynos/dsim.h | 181 ++++
arch/arm/include/asm/arch-exynos/fb.h | 446 +++++++++
arch/arm/include/asm/arch-exynos/mipi_dsim.h | 380 ++++++++
arch/arm/include/asm/arch-exynos/power.h | 6 +
arch/arm/include/asm/arch-exynos/system.h | 53 ++
arch/arm/include/asm/arch-exynos/tzpc.h | 2 +-
arch/arm/include/asm/arch-lpc32xx/clk.h | 170 ++++
arch/arm/include/asm/arch-lpc32xx/config.h | 76 ++
arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 ++
arch/arm/include/asm/arch-lpc32xx/emc.h | 92 ++
arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 +
arch/arm/include/asm/arch-lpc32xx/timer.h | 74 ++
arch/arm/include/asm/arch-lpc32xx/uart.h | 114 +++
arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++
arch/arm/include/asm/arch-mx25/clock.h | 23 +
arch/arm/include/asm/arch-mx25/imx-regs.h | 3 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx28/regs-lcdif.h | 212 +++++
arch/arm/include/asm/arch-mx28/regs-lradc.h | 400 ++++++++
arch/arm/include/asm/arch-mx28/sys_proto.h | 30 +
arch/arm/include/asm/arch-mx5/clock.h | 7 +-
arch/arm/include/asm/arch-mx5/crm_regs.h | 6 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 11 +
arch/arm/include/asm/arch-mx5/iomux.h | 4 +-
arch/arm/include/asm/arch-mx5/sys_proto.h | 3 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
.../asm/arch-mx6/{ccm_regs.h => crm_regs.h} | 2 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +
arch/arm/include/asm/arch-mx6/iomux-v3.h | 111 +++
arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +-
arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
arch/arm/include/asm/arch-omap3/mux.h | 6 +
arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
arch/arm/include/asm/arch-omap4/cpu.h | 11 +
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
arch/arm/include/asm/arch-omap4/omap.h | 25 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
arch/arm/include/asm/arch-omap5/clocks.h | 52 +-
arch/arm/include/asm/arch-omap5/cpu.h | 11 +
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 +++++-----
arch/arm/include/asm/arch-omap5/omap.h | 153 +++-
arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
.../tegra2 => include/asm/arch-tegra2}/ap20.h | 7 +
arch/arm/include/asm/arch-tegra2/apb_misc.h | 36 +
arch/arm/include/asm/arch-tegra2/clk_rst.h | 3 +
arch/arm/include/asm/arch-tegra2/clock.h | 22 +
arch/arm/include/asm/arch-tegra2/emc.h | 113 +++
arch/arm/include/asm/arch-tegra2/flow.h | 36 +
arch/arm/include/asm/arch-tegra2/fuse.h | 39 +
arch/arm/include/asm/arch-tegra2/gp_padctrl.h | 73 ++
arch/arm/include/asm/arch-tegra2/pmu.h | 30 +
arch/arm/include/asm/arch-tegra2/sdram_param.h | 148 +++
arch/arm/include/asm/arch-tegra2/tegra2.h | 25 +
arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 7 +
arch/arm/include/asm/arch-tegra2/warmboot.h | 150 +++
arch/arm/include/asm/emif.h | 76 +-
arch/arm/include/asm/linkage.h | 7 +
arch/arm/include/asm/omap_common.h | 11 +-
board/cloudengines/pogo_e02/Makefile | 43 +
board/cloudengines/pogo_e02/kwbimage.cfg | 169 ++++
board/cloudengines/pogo_e02/pogo_e02.c | 118 +++
board/cloudengines/pogo_e02/pogo_e02.h | 44 +
board/cm_t35/cm_t35.c | 19 +-
board/comelit/dig297/dig297.c | 2 +-
board/corscience/tricorder/tricorder.c | 2 +-
board/davinci/ea20/ea20.c | 4 +-
board/denx/m28evk/m28evk.c | 20 +-
board/denx/m28evk/spl_boot.c | 8 +-
board/esg/ima3-mx53/Makefile | 41 +
board/esg/ima3-mx53/ima3-mx53.c | 302 ++++++
board/esg/ima3-mx53/imximage.cfg | 108 +++
board/freescale/mx28evk/iomux.c | 21 +
board/freescale/mx53loco/mx53loco.c | 146 ++-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 155 +++-
board/htkw/mcx/mcx.c | 13 +-
board/isee/igep0020/igep0020.c | 4 +-
board/isee/igep0030/igep0030.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 13 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/logicpd/zoom2/zoom2.c | 2 +-
board/matrix_vision/mvblx/mvblx.c | 4 +-
board/nvidia/common/Makefile | 1 +
board/nvidia/common/board.c | 42 +-
board/nvidia/common/emc.c | 53 ++
board/nvidia/common/emc.h | 29 +
board/nvidia/dts/tegra2-seaboard.dts | 64 ++
board/overo/overo.c | 2 +-
board/pandora/pandora.c | 59 +-
board/pandora/pandora.h | 6 +
board/raidsonic/ib62x0/Makefile | 43 +
board/raidsonic/ib62x0/ib62x0.c | 79 ++
board/raidsonic/ib62x0/ib62x0.h | 40 +
board/raidsonic/ib62x0/kwbimage.cfg | 169 ++++
board/samsung/smdk5250/tzpc_init.c | 4 +-
board/samsung/trats/trats.c | 173 +++-
board/samsung/universal_c210/universal.c | 25 +-
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 9 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/beagle/beagle.c | 2 +-
board/ti/evm/evm.c | 2 +-
board/ti/omap5912osk/omap5912osk.c | 7 -
board/ti/omap5_evm/evm.c | 10 +-
board/ti/omap5_evm/mux_data.h | 489 +++++-----
board/ti/omap730p2/omap730p2.c | 6 -
board/ti/panda/panda.c | 2 +-
board/ti/panda/panda_mux_data.h | 10 +-
board/ti/sdp3430/sdp.c | 2 +-
board/ti/sdp4430/sdp.c | 4 +-
board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
board/timll/devkit3250/Makefile | 44 +
board/timll/devkit3250/devkit3250.c | 65 ++
board/timll/devkit8000/devkit8000.c | 2 +-
boards.cfg | 8 +-
common/cmd_sata.c | 9 +-
config.mk | 6 +-
doc/SPL/README.omap3 | 4 +-
drivers/bios_emulator/x86emu/prim_ops.c | 5 -
drivers/block/Makefile | 1 +
drivers/block/dwc_ahsata.c | 969
++++++++++++++++++++
drivers/block/dwc_ahsata.h | 335 +++++++
drivers/gpio/mxc_gpio.c | 3 +-
drivers/i2c/tegra_i2c.c | 14 +
drivers/input/Makefile | 3 +
drivers/input/input.c | 430 +++++++++
drivers/input/key_matrix.c | 208 +++++
drivers/input/tegra-kbc.c | 375 ++++++++
drivers/misc/Makefile | 2 +
drivers/misc/pmic_dialog.c | 37 +
drivers/misc/pmic_max8997.c | 43 +
drivers/mmc/mxsmmc.c | 3 +-
drivers/mmc/omap_hsmmc.c | 61 +-
drivers/mtd/nand/mxc_nand.c | 33 +
drivers/net/fec_mxc.c | 88 +-
drivers/power/Makefile | 2 +
drivers/power/tps6586x.c | 280 ++++++
drivers/power/twl6035.c | 65 ++
drivers/serial/Makefile | 1 +
drivers/serial/lpc32xx_hsuart.c | 112 +++
drivers/spi/mxs_spi.c | 23 +-
drivers/usb/host/ehci-mx6.c | 5 +-
drivers/usb/host/ehci-mxc.c | 4 -
drivers/video/Makefile | 4 +
drivers/video/exynos_fb.c | 128 +++
drivers/video/exynos_fb.h | 61 ++
drivers/video/exynos_fimd.c | 354 +++++++
drivers/video/exynos_mipi_dsi.c | 253 +++++
drivers/video/exynos_mipi_dsi_common.c | 637 +++++++++++++
drivers/video/exynos_mipi_dsi_common.h | 48 +
drivers/video/exynos_mipi_dsi_lowlevel.c | 652 +++++++++++++
drivers/video/exynos_mipi_dsi_lowlevel.h | 111 +++
drivers/video/s6e8ax0.c | 256 ++++++
include/aes.h | 70 ++
include/ahci.h | 5 +-
include/common.h | 25 +
include/configs/P1023RDS.h | 3 -
include/configs/P2020COME.h | 2 -
include/configs/am3517_crane.h | 3 +-
include/configs/am3517_evm.h | 4 +-
include/configs/at91sam9263ek.h | 2 -
include/configs/cam_enc_4xx.h | 2 +-
include/configs/cm_t35.h | 1 +
include/configs/da830evm.h | 1 -
include/configs/devkit3250.h | 117 +++
include/configs/devkit8000.h | 2 +-
include/configs/dreamplug.h | 2 +
include/configs/ea20.h | 3 +-
include/configs/eb_cpux9k2.h | 2 -
include/configs/flea3.h | 2 -
include/configs/hawkboard.h | 1 -
include/configs/ib62x0.h | 152 +++
include/configs/igep0030.h | 261 ------
include/configs/{igep0020.h => igep00x0.h} | 45 +-
include/configs/ima3-mx53.h | 269 ++++++
include/configs/imx27lite-common.h | 1 -
include/configs/m28evk.h | 15 +-
include/configs/mcx.h | 4 +-
include/configs/meesc.h | 1 -
include/configs/mv-common.h | 1 -
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 13 +
include/configs/mx31pdk.h | 1 +
include/configs/mx35pdk.h | 2 -
include/configs/mx53loco.h | 29 +-
include/configs/mx6qarm2.h | 1 +
include/configs/mx6qsabrelite.h | 17 +
include/configs/omap3_beagle.h | 3 +-
include/configs/omap3_evm_common.h | 3 +-
include/configs/omap3_overo.h | 3 +-
include/configs/omap3_pandora.h | 3 +-
include/configs/omap4_common.h | 5 +-
include/configs/omap5912osk.h | 2 -
include/configs/omap5_evm.h | 26 +-
include/configs/omap730p2.h | 2 -
include/configs/otc570.h | 1 -
include/configs/p1_p2_rdb_pc.h | 3 -
include/configs/pogo_e02.h | 119 +++
include/configs/seaboard.h | 16 +
include/configs/spear-common.h | 1 -
include/configs/tam3517-common.h | 3 +-
include/configs/tegra2-common.h | 26 +-
include/configs/trats.h | 15 +-
include/configs/tricorder.h | 3 +-
include/configs/tx25.h | 2 -
include/configs/zmx25.h | 2 -
include/dialog_pmic.h | 187 ++++
include/fdtdec.h | 71 ++
include/fsl_pmic.h | 11 +
include/input.h | 147 +++
include/key_matrix.h | 99 ++
include/lcd.h | 64 ++
include/linux/input.h | 155 ++++
include/linux/linkage.h | 7 +-
include/max8997_pmic.h | 190 ++++
include/max8998_pmic.h | 1 +
include/pmic.h | 1 +
include/tegra-kbc.h | 33 +
include/tps6586x.h | 68 ++
include/twl6035.h | 42 +
lib/Makefile | 1 +
lib/aes.c | 598 ++++++++++++
lib/fdtdec.c | 53 ++
tools/gcc-version.sh | 32 +
297 files changed, 18126 insertions(+), 1594 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clk.c
create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c
create mode 100644 arch/arm/cpu/armv7/exynos/power.c
create mode 100644 arch/arm/cpu/armv7/exynos/system.c
rename arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.c
create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.h
create mode 100644 arch/arm/cpu/armv7/tegra2/emc.c
create mode 100644 arch/arm/cpu/armv7/tegra2/pmu.c
create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot.c
create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.c
create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.h
create mode 100644 arch/arm/include/asm/arch-exynos/dsim.h
create mode 100644 arch/arm/include/asm/arch-exynos/fb.h
create mode 100644 arch/arm/include/asm/arch-exynos/mipi_dsim.h
create mode 100644 arch/arm/include/asm/arch-exynos/system.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-lcdif.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-lradc.h
rename arch/arm/include/asm/arch-mx6/{ccm_regs.h => crm_regs.h} (99%)
rename arch/arm/{cpu/armv7/tegra2 => include/asm/arch-tegra2}/ap20.h (96%)
create mode 100644 arch/arm/include/asm/arch-tegra2/apb_misc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/emc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/flow.h
create mode 100644 arch/arm/include/asm/arch-tegra2/fuse.h
create mode 100644 arch/arm/include/asm/arch-tegra2/gp_padctrl.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pmu.h
create mode 100644 arch/arm/include/asm/arch-tegra2/sdram_param.h
create mode 100644 arch/arm/include/asm/arch-tegra2/warmboot.h
create mode 100644 arch/arm/include/asm/linkage.h
create mode 100644 board/cloudengines/pogo_e02/Makefile
create mode 100644 board/cloudengines/pogo_e02/kwbimage.cfg
create mode 100644 board/cloudengines/pogo_e02/pogo_e02.c
create mode 100644 board/cloudengines/pogo_e02/pogo_e02.h
create mode 100644 board/esg/ima3-mx53/Makefile
create mode 100644 board/esg/ima3-mx53/ima3-mx53.c
create mode 100644 board/esg/ima3-mx53/imximage.cfg
create mode 100644 board/nvidia/common/emc.c
create mode 100644 board/nvidia/common/emc.h
create mode 100644 board/raidsonic/ib62x0/Makefile
create mode 100644 board/raidsonic/ib62x0/ib62x0.c
create mode 100644 board/raidsonic/ib62x0/ib62x0.h
create mode 100644 board/raidsonic/ib62x0/kwbimage.cfg
create mode 100644 board/timll/devkit3250/Makefile
create mode 100644 board/timll/devkit3250/devkit3250.c
create mode 100644 drivers/block/dwc_ahsata.c
create mode 100644 drivers/block/dwc_ahsata.h
create mode 100644 drivers/input/input.c
create mode 100644 drivers/input/key_matrix.c
create mode 100644 drivers/input/tegra-kbc.c
create mode 100644 drivers/misc/pmic_dialog.c
create mode 100644 drivers/misc/pmic_max8997.c
create mode 100644 drivers/power/tps6586x.c
create mode 100644 drivers/power/twl6035.c
create mode 100644 drivers/serial/lpc32xx_hsuart.c
create mode 100644 drivers/video/exynos_fb.c
create mode 100644 drivers/video/exynos_fb.h
create mode 100644 drivers/video/exynos_fimd.c
create mode 100644 drivers/video/exynos_mipi_dsi.c
create mode 100644 drivers/video/exynos_mipi_dsi_common.c
create mode 100644 drivers/video/exynos_mipi_dsi_common.h
create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.c
create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.h
create mode 100644 drivers/video/s6e8ax0.c
create mode 100644 include/aes.h
create mode 100644 include/configs/devkit3250.h
create mode 100644 include/configs/ib62x0.h
delete mode 100644 include/configs/igep0030.h
rename include/configs/{igep0020.h => igep00x0.h} (91%)
create mode 100644 include/configs/ima3-mx53.h
create mode 100644 include/configs/pogo_e02.h
create mode 100644 include/dialog_pmic.h
create mode 100644 include/input.h
create mode 100644 include/key_matrix.h
create mode 100644 include/linux/input.h
create mode 100644 include/max8997_pmic.h
create mode 100644 include/tegra-kbc.h
create mode 100644 include/tps6586x.h
create mode 100644 include/twl6035.h
create mode 100644 lib/aes.c
create mode 100755 tools/gcc-version.sh
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-04-16 20:15 ` Albert ARIBAUD
@ 2012-04-17 5:33 ` Stefano Babic
0 siblings, 0 replies; 261+ messages in thread
From: Stefano Babic @ 2012-04-17 5:33 UTC (permalink / raw)
To: u-boot
On 16/04/2012 22:15, Albert ARIBAUD wrote:
> Le 16/04/2012 20:18, Marek Vasut a ?crit :
>> Dear Albert ARIBAUD,
>>
Hi Albert,
>>> Hi Wolfgang,
>>>
>>> The following changes since commit
>>> 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
>>
>> You're missing those two ARM926 cache patches I assigned to you in
>> patchwork.
>> Can you please check them and amend them to this pull rq ?
>>
>> Thanks!
>
> Cc:ing Stefano...
>
> Stefano, didn't you want to submit a patch too? I haven't seen it in
> your pull req -- but I may have missed it.
In the last pull request I merged the following patches regarding cache
on i.MX:
cc305ea2a60f44b i.MX6: arm2: Add AXI cache and Qos setting
f2a747617be0b4 ARM1136: MX35: Make asm routines volatile in cache ops
d363c599aa86d4 MX31: mx31pdk: drop enable_caches from board file
26adc4524fbcaa mx35: mx35pdk: fix when cache functions are linked
32c3fbf76f9807 mx35: flea3: fix when cache functions are linked
bff563e41904c0 ARM: 926ejs: use debug() for misaligned addresses
86504bb17d277 ARM1136: add cache flush and invalidate operations
I have still one patch as a fix I applied yesterday for a specific
board. It will be not bad if you can merge it for the release. I have
not other pending patches, if I have not missed anything ;-)
For this patch I'll send a pull request.
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
@ 2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
1 sibling, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-04-16 20:15 UTC (permalink / raw)
To: u-boot
Le 16/04/2012 20:18, Marek Vasut a ?crit :
> Dear Albert ARIBAUD,
>
>> Hi Wolfgang,
>>
>> The following changes since commit
>> 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
>
> You're missing those two ARM926 cache patches I assigned to you in patchwork.
> Can you please check them and amend them to this pull rq ?
>
> Thanks!
Cc:ing Stefano...
Stefano, didn't you want to submit a patch too? I haven't seen it in
your pull req -- but I may have missed it.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-04-16 18:18 ` Marek Vasut
@ 2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
1 sibling, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2012-04-16 20:09 UTC (permalink / raw)
To: u-boot
Hi Marek,
Le 16/04/2012 20:18, Marek Vasut a ?crit :
> Dear Albert ARIBAUD,
>
>> Hi Wolfgang,
>>
>> The following changes since commit
>> 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
>
> You're missing those two ARM926 cache patches I assigned to you in patchwork.
> Can you please check them and amend them to this pull rq ?
>
> Thanks!
All right. Wolfgang, hold on; I'll send out an amended request.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-04-16 14:52 Albert ARIBAUD
@ 2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
0 siblings, 2 replies; 261+ messages in thread
From: Marek Vasut @ 2012-04-16 18:18 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
> Hi Wolfgang,
>
> The following changes since commit
> 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
You're missing those two ARM926 cache patches I assigned to you in patchwork.
Can you please check them and amend them to this pull rq ?
Thanks!
>
> Merge branch 'marek.vasut at gmail.com' of
> git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Anatolij Gustschin (1):
> ARM1136: add cache flush and invalidate operations
>
> Bernhard Walle (2):
> tricorder: Add UBIFS
> tricorder: Load kernel from ubifs
>
> Eric Nelson (3):
> i.MX6: define CACHELINE_SIZE
> i.MX6: implement enable_caches()
> i.MX6: mx6qsabrelite: add cache commands if cache is enabled
>
> Fabio Estevam (4):
> mx28: Split the README into a common part and a m28 specific part
> mx28evk: Add a README file
> mx6qsabrelite: Add boot switch setting information into the README
> mx6qsabrelite: Fix the serial console port
>
> Igor Grinberg (1):
> cm-t35: fix Ethernet reset timing
>
> Joel Fernandes (1):
> BeagleBoard: Remove userbutton command and use gpio command instead
>
> Marek Vasut (4):
> i.MX28: Fix initial stack pointer position
> i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
> DMA: Split the APBH DMA init into block and channel init
> M28: Pull out CONFIG_APBH_DMA so it's always enabled
>
> Stefano Babic (7):
> ARM: 926ejs: use debug() for misaligned addresses
> mx35: flea3: fix when cache functions are linked
> mx35: mx35pdk: fix when cache functions are linked
> MX31: mx31pdk: drop enable_caches from board file
> ARM: add u-boot.imx as target for i.MX SOCs
> ARM1136: MX35: Make asm routines volatile in cache ops
> MX35: mx35pdk: wrong board revision
>
> Tom Rini (2):
> OMAP: Move omap1510inn to Unmaintained / Orphaned
> hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT
>
> Troy Kisky (1):
> MX53: DDR: Fix ZQHWCTRL field TZQ_CS
>
> Vikram Narayanan (4):
> imx: Remove unneeded/repititive definitions from imx headers
> imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
> imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >>
> 5) imx: Return gpio_set_value in gpio_direction_output
>
> MAINTAINERS | 7 +-
> arch/arm/cpu/arm1136/cpu.c | 103 ++++++++++++-
> arch/arm/cpu/arm926ejs/cache.c | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +
> arch/arm/cpu/armv7/config.mk | 3 +
> arch/arm/cpu/armv7/mx6/soc.c | 8 +
> arch/arm/include/asm/arch-mx28/dma.h | 4 +-
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 2 -
> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 2 -
> arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
> board/cm_t35/cm_t35.c | 11 +-
> board/freescale/mx31pdk/mx31pdk.c | 8 -
> board/freescale/mx35pdk/mx35pdk.c | 11 --
> board/freescale/mx53ard/imximage_dd3.cfg | 2 +-
> board/freescale/mx53evk/imximage.cfg | 2 +-
> board/freescale/mx53loco/imximage.cfg | 2 +-
> board/freescale/mx53smd/imximage.cfg | 2 +-
> board/ti/beagle/beagle.c | 55 -------
> doc/README.m28 | 219
> +--------------------------
> doc/README.mx28_common | 226
> ++++++++++++++++++++++++++++
> doc/README.mx28evk | 29 ++++
> doc/README.mx6qsabrelite | 3 +-
> drivers/dma/apbh_dma.c | 38 ++---
> drivers/gpio/mxc_gpio.c | 12 +-
> drivers/mmc/mxsmmc.c | 53 +++++++-
> drivers/mtd/nand/mxs_nand.c | 11 +-
> include/configs/flea3.h | 2 +
> include/configs/hawkboard.h | 1 +
> include/configs/m28evk.h | 8 +-
> include/configs/mx28evk.h | 2 +-
> include/configs/mx35pdk.h | 3 +-
> include/configs/mx6qarm2.h | 2 +
> include/configs/mx6qsabrelite.h | 8 +-
> include/configs/omap3_beagle.h | 11 +-
> include/configs/tricorder.h | 15 ++-
> 35 files changed, 522 insertions(+), 355 deletions(-)
> create mode 100644 doc/README.mx28_common
> create mode 100644 doc/README.mx28evk
>
> Amicalement,
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-04-16 14:52 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
Merge branch 'marek.vasut at gmail.com' of
git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Anatolij Gustschin (1):
ARM1136: add cache flush and invalidate operations
Bernhard Walle (2):
tricorder: Add UBIFS
tricorder: Load kernel from ubifs
Eric Nelson (3):
i.MX6: define CACHELINE_SIZE
i.MX6: implement enable_caches()
i.MX6: mx6qsabrelite: add cache commands if cache is enabled
Fabio Estevam (4):
mx28: Split the README into a common part and a m28 specific part
mx28evk: Add a README file
mx6qsabrelite: Add boot switch setting information into the README
mx6qsabrelite: Fix the serial console port
Igor Grinberg (1):
cm-t35: fix Ethernet reset timing
Joel Fernandes (1):
BeagleBoard: Remove userbutton command and use gpio command instead
Marek Vasut (4):
i.MX28: Fix initial stack pointer position
i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
DMA: Split the APBH DMA init into block and channel init
M28: Pull out CONFIG_APBH_DMA so it's always enabled
Stefano Babic (7):
ARM: 926ejs: use debug() for misaligned addresses
mx35: flea3: fix when cache functions are linked
mx35: mx35pdk: fix when cache functions are linked
MX31: mx31pdk: drop enable_caches from board file
ARM: add u-boot.imx as target for i.MX SOCs
ARM1136: MX35: Make asm routines volatile in cache ops
MX35: mx35pdk: wrong board revision
Tom Rini (2):
OMAP: Move omap1510inn to Unmaintained / Orphaned
hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT
Troy Kisky (1):
MX53: DDR: Fix ZQHWCTRL field TZQ_CS
Vikram Narayanan (4):
imx: Remove unneeded/repititive definitions from imx headers
imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
imx: Return gpio_set_value in gpio_direction_output
MAINTAINERS | 7 +-
arch/arm/cpu/arm1136/cpu.c | 103 ++++++++++++-
arch/arm/cpu/arm926ejs/cache.c | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +
arch/arm/cpu/armv7/config.mk | 3 +
arch/arm/cpu/armv7/mx6/soc.c | 8 +
arch/arm/include/asm/arch-mx28/dma.h | 4 +-
arch/arm/include/asm/arch-mx35/mx35_pins.h | 2 -
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 2 -
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
board/cm_t35/cm_t35.c | 11 +-
board/freescale/mx31pdk/mx31pdk.c | 8 -
board/freescale/mx35pdk/mx35pdk.c | 11 --
board/freescale/mx53ard/imximage_dd3.cfg | 2 +-
board/freescale/mx53evk/imximage.cfg | 2 +-
board/freescale/mx53loco/imximage.cfg | 2 +-
board/freescale/mx53smd/imximage.cfg | 2 +-
board/ti/beagle/beagle.c | 55 -------
doc/README.m28 | 219
+--------------------------
doc/README.mx28_common | 226
++++++++++++++++++++++++++++
doc/README.mx28evk | 29 ++++
doc/README.mx6qsabrelite | 3 +-
drivers/dma/apbh_dma.c | 38 ++---
drivers/gpio/mxc_gpio.c | 12 +-
drivers/mmc/mxsmmc.c | 53 +++++++-
drivers/mtd/nand/mxs_nand.c | 11 +-
include/configs/flea3.h | 2 +
include/configs/hawkboard.h | 1 +
include/configs/m28evk.h | 8 +-
include/configs/mx28evk.h | 2 +-
include/configs/mx35pdk.h | 3 +-
include/configs/mx6qarm2.h | 2 +
include/configs/mx6qsabrelite.h | 8 +-
include/configs/omap3_beagle.h | 11 +-
include/configs/tricorder.h | 15 ++-
35 files changed, 522 insertions(+), 355 deletions(-)
create mode 100644 doc/README.mx28_common
create mode 100644 doc/README.mx28evk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-03-30 7:10 Albert ARIBAUD
@ 2012-03-30 17:58 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-03-30 17:58 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4F755C4A.5090606@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 7cb30b13f12077c7eec8ce2419cd96cd65ace8e2:
>
> Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
> (2012-03-23 21:59:16 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Anatolij Gustschin (4):
> nhk8815: fix build errors
> board/vpac270/onenand.c: Fix build errors
> board/ti/beagle/beagle.c: Fix build warnings
> arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
>
> Andreas Bie?mann (1):
> atmel-boards: add missing atmel_mci.h
>
> Chander Kashyap (1):
> EXYNOS: Add structure for Exynos4 DMC
>
> Christian Riesch (1):
> calimain, enbw_cmc: Fix typo in comments
>
> David M?ller (ELSOFT AG) (1):
> ARM: fix s3c2410 timer code
>
> Dirk Behme (2):
> mx6q: mx6qsabrelite: Update the README
> imximage: Remove overwriting of flash_offset
>
> Doug Anderson (1):
> EXYNOS: SMDK5250: Support all 4 UARTs
>
> Eric Nelson (6):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init
> to allow use for environment
> i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
> i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
> net: force PKTALIGN to ARCH_DMA_MINALIGN
> net: fec_mxc: allow use with cache enabled
>
> Fabio Estevam (15):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
> mx6: Fix reset cause for Power On Reset case
> mx6: Remove duplicate definition of ANATOP_BASE_ADDR
> pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
> mxs_spi: Return proper timeout error
> mx6: Read silicon revision from register
> USB: ehci-mx6: Add proper IO accessors
> mx28evk: Provide default values for SPI bus and chip select
> configs: imx: Use CONFIG_SF_DEFAULT_CS
> mx53: Make PLL2 to be the parent of UART clock
> mx53ard: Initialize return code with error
>
> Grazvydas Ignotas (1):
> twl4030: fix potential power supply handling issues
>
> Heiko Schocher (1):
> ARM: davinci: fixes for cam_enc_4xx board
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> Jason Hobbs (1):
> ARM: highbank: change env config to use nvram
>
> Marek Vasut (23):
> PXA: Remove PXA PCMCIA support
> PXA: Fix warning in zipitz2
> PXA: Fix missing get_tbclk() breaking vpac boards
> M28: Fix LCD PINMUX
> M28: Support for the old M28 SoM v1.0
> i.MX28: Reformat the DRAM memory configuration data
> Examples: Properly append LDFLAGS to LD command
> IXP: Make IXP buildable with arm-linux- toolchains
> IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
> IXP: Squash warnings in IXP NPE
> IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
> IXP: Fix NAND build warning on PDNB3 and SCPU
> IXP: Fix GPIO_INT_ACT_LOW_SET()
> i.MX28: Enable additional DRAM address bits
> i.MX28: Make the stabilization delays shorter
> i.MX28: Drop __naked function from spl_mem_init
> ARM926EJS: Implement cache operations
> i.MX28: Add cache support into the APBH DMA driver
> i.MX28: Add cache support to MXS NAND driver
> MMC: Implement generic bounce buffer
> i.MX28: Do data transfers via DMA in MMC driver
> i.MX28: Make use of the bounce buffer
> i.MX28: Enable caches by default
>
> Matt Porter (2):
> SPL: Add YMODEM over UART load support
> SPL: Enable YMODEM support on BeagleBone and AM335x EVM
>
> Rob Herring (8):
> net: calxedaxgmac: fix build due to missing __aligned definition
> ARM: highbank: fix warning for calxedaxgmac_initialize
> ARM: highbank: add missing get_tbclk
> ARM: highbank: fix us_to_tick calculation
> ARM: highbank: change TEXT_BASE to 0x8000
> ARM: highbank: Add boot counter support
> ARM: highbank: add reset support
> ARM: highbank: setup env from boot source register
>
> Robert Delien (5):
> i.mx28: Added register definitions for DIGCTL registers
> i.mx28: Replaced magic numbers for scratch register addresses
> with register definitions
> Renamed mx28_register to mx28_register_32 to prepare for
> mx28_register_8
> Introducing 8-bit wide register, mx28_register_8
> Fix erroneous 32-bit access to hw_clkctrl_frac0 and
> hw_clkctrl_frac1 registers
>
> Simon Glass (39):
> arm: Remove jornada link script
> fdt: Add fdtdec_find_aliases() to deal with alias nodes
> fdt: Add tests for fdtdec
> fdt: Tidy up a few fdtdec problems
> fdt: Add functions to access phandles, arrays and bools
> fdt: Add basic support for decoding GPIO definitions
> arm: fdt: Add skeleton device tree file from kernel
> tegra: fdt: Add Tegra2x device tree file from kernel
> tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
> fdt: Add staging area for device tree binding documentation
> fdt: Add tegra-usb bindings file from linux
> tegra: fdt: Add additional USB binding
> tegra: fdt: Add clock bindings
> tegra: fdt: Add clock bindings for Tegra2 Seaboard
> tegra: usb: fdt: Add additional device tree definitions for USB ports
> tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
> usb: Add support for txfifo threshold
> tegra: fdt: Add function to return peripheral/clock ID
> tegra: usb: Add support for Tegra USB peripheral
> fdt: Avoid early panic() when there is no FDT present
> arm: Check for valid FDT after console is up
> tegra: usb: Add USB support to nvidia boards
> tegra: usb: Add common USB defines for tegra2 boards
> tegra: usb: Enable USB on Seaboard
> tegra: fdt: Enable FDT support for Seaboard
> tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
> fdt: Add function to allow aliases to refer to multiple nodes
> tegra: Enhance clock support to handle 16-bit clock divisors
> tegra: i2c: Initialise I2C on Nvidia boards
> tegra: i2c: Select number of controllers for Tegra2 boards
> tegra: i2c: Enable I2C on Seaboard
> tegra: i2c: Select I2C ordering for Seaboard
> tegra: fdt: i2c: Add extra I2C bindings for U-Boot
> Allow arch directory to contain .lds without requiring Makefile
> arm: Remove zipitz2 link script
> Define CPUDIR for the .lds link script
> arm: Remove unneeded setting of LDCSRIPT
> arm: add a common .lds link script
> arm: Use common .lds file where possible
>
> Simon Schwarz (8):
> Add cmd_spl command
> devkit8000: add config for spl command
> omap-common: Add NAND SPL linux booting
> devkit8000/spl: init GPMC for dm9000 in SPL
> omap-common/spl: Add linux boot to SPL
> omap/spl: change output of spl_parse_image_header
> devkit8000: Implement and activate direct OS boot
> arm: Add Prep subcommand support to bootm
>
> Stefano Babic (8):
> Add cache functions to SPL for armv7
> OMAP3: SPL: do not call I2C init if no I2C is set.
> SPL: call cleanup_before_linux() before booting Linux
> OMAP3: twister: add support to boot Linux from SPL
> NAND: TI: fix warnings in omap_gpmc.c
> OMAP3: mt_ventoux: updated timing for FPGA
> OMAP3: mt_ventoux: sets its own mtdparts
> Davinci: ea20: use gpio framework to access gpios
>
> Tom Rini (9):
> .gitignore: Add .su files
> config.mk: Make cc-option create a file under include/generated
> config.mk: Check for -fstack-usage support
> spl.c: Use __noreturn decorator
> README: document more SPL config options
> SPL: Add README.omap3
> cam_enc_4xx: Rename 'images' to 'imgs'
> sdrc.c: Fix typo in do_sdrc_init() for SPL
> OMAP: Remove omap1610inn-based boards
>
> Tom Warren (2):
> arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer
> load
> tegra: fdt: Enable FDT support for Ventana
>
> Vasily Khoruzhick (2):
> zipitz2: fix boot issue introduced by PXA low level init rework
> zipitz2: use pxa_mmc_gen as MMC driver
>
> Wolfgang Grandegger (2):
> usb/ehci: Add USB support for the MX6Q
> mx6qsabrelite: add and enable USB Host 1 support
>
> Yen Lin (1):
> tegra: i2c: Add I2C driver
>
> jacopo mondi (1):
> omap3_spi: receive transmit mode
>
> .gitignore | 1 +
> MAINTAINERS | 1 -
> Makefile | 25 +-
> README | 72 +++-
> arch/arm/config.mk | 7 -
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +
> arch/arm/cpu/arm1136/u-boot.lds | 89 ---
> arch/arm/cpu/arm1176/u-boot.lds | 78 ---
> arch/arm/cpu/arm720t/u-boot.lds | 79 ---
> arch/arm/cpu/arm920t/s3c24x0/timer.c | 64 +--
> arch/arm/cpu/arm920t/u-boot.lds | 88 ---
> arch/arm/cpu/arm925t/u-boot.lds | 83 ---
> arch/arm/cpu/arm926ejs/cache.c | 66 ++-
> arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +--
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 24 +-
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 130 +++---
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/arm926ejs/nomadik/timer.c | 10 +
> arch/arm/cpu/arm926ejs/u-boot.lds | 80 ---
> arch/arm/cpu/arm946es/u-boot.lds | 80 ---
> arch/arm/cpu/arm_intcm/u-boot.lds | 80 ---
> arch/arm/cpu/armv7/Makefile | 2 -
> arch/arm/cpu/armv7/cpu.c | 2 +
> arch/arm/cpu/armv7/highbank/Makefile | 2 +-
> arch/arm/cpu/armv7/highbank/bootcount.c | 36 ++
> arch/arm/cpu/armv7/highbank/config.mk | 1 +
> arch/arm/cpu/armv7/highbank/timer.c | 9 +-
> arch/arm/cpu/armv7/imx-common/cpu.c | 25 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +-
> arch/arm/cpu/armv7/mx6/clock.c | 13 +
> arch/arm/cpu/armv7/mx6/soc.c | 8 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 3 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 56 ++-
> arch/arm/cpu/armv7/omap-common/spl_nand.c | 47 ++-
> arch/arm/cpu/armv7/omap-common/spl_ymodem.c | 76 +++
> arch/arm/cpu/armv7/omap3/board.c | 2 +
> arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 4 +-
> arch/arm/cpu/armv7/tegra2/ap20.c | 20 +-
> arch/arm/cpu/armv7/tegra2/board.c | 2 +-
> arch/arm/cpu/armv7/tegra2/clock.c | 121 ++++-
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/usb.c | 460 ++++++++++++++++
> arch/arm/cpu/ixp/config.mk | 3 +
> arch/arm/cpu/ixp/npe/IxEthAcc.c | 2 +-
> arch/arm/cpu/ixp/npe/IxEthDBAPISupport.c | 3 -
> arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c | 3 -
> arch/arm/cpu/lh7a40x/u-boot.lds | 80 ---
> arch/arm/cpu/pxa/timer.c | 5 +
> arch/arm/cpu/pxa/u-boot.lds | 86 ---
> arch/arm/cpu/s3c44b0/u-boot.lds | 80 ---
> arch/arm/cpu/sa1100/u-boot.lds | 83 ---
> arch/arm/cpu/{armv7 => }/u-boot.lds | 15 +-
> arch/arm/dts/skeleton.dtsi | 13 +
> arch/arm/dts/tegra20.dtsi | 196 +++++++
> arch/arm/include/asm/arch-exynos/dmc.h | 109 ++++
> arch/arm/include/asm/arch-ixp/ixp425.h | 10 +-
> arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 +++++-----
> arch/arm/include/asm/arch-mx28/regs-bch.h | 42 +-
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++--
> arch/arm/include/asm/arch-mx28/regs-common.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 ++++++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 +-
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++--
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 +++---
> arch/arm/include/asm/arch-mx28/regs-power.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 +-
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 +-
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 +-
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 146 +++++-
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 10 +-
> arch/arm/include/asm/arch-tegra2/clock.h | 13 +
> arch/arm/include/asm/arch-tegra2/tegra2.h | 6 +-
> arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 157 ++++++
> arch/arm/include/asm/arch-tegra2/usb.h | 252 +++++++++
> arch/arm/include/asm/bootm.h | 26 +
> arch/arm/include/asm/omap_common.h | 5 +
> arch/arm/lib/Makefile | 5 +-
> arch/arm/lib/board.c | 8 +
> arch/arm/lib/bootm.c | 349 ++++++------
> board/actux1/actux1.c | 2 -
> board/actux2/actux2.c | 2 -
> board/actux3/actux3.c | 2 -
> board/actux4/actux4.c | 2 -
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 103 +++--
> board/ait/cam_enc_4xx/config.mk | 7 +
> board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
> board/davinci/ea20/ea20.c | 38 +-
> board/denx/m28evk/spl_boot.c | 16 +-
> board/dvlhost/dvlhost.c | 2 -
> board/egnite/ethernut5/ethernut5.c | 1 +
> board/emk/top9000/top9000.c | 1 +
> board/enbw/enbw_cmc/enbw_cmc.c | 2 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 31 +-
> board/highbank/highbank.c | 23 +
> board/nvidia/common/board.c | 19 +
> board/nvidia/common/board.h | 6 +
> board/nvidia/dts/tegra2-seaboard.dts | 92 ++++
> board/nvidia/seaboard/seaboard.c | 6 +
> board/omicron/calimain/calimain.c | 2 +-
> board/prodrive/pdnb3/nand.c | 16 +-
> board/prodrive/pdnb3/pdnb3.c | 3 -
> board/samsung/smdk5250/smdk5250.c | 44 ++-
> board/technexion/twister/twister.c | 23 +
> board/teejet/mt_ventoux/mt_ventoux.h | 11 +-
> board/ti/beagle/beagle.c | 3 +-
> board/ti/omap1610inn/Makefile | 45 --
> board/ti/omap1610inn/config.mk | 26 -
> board/ti/omap1610inn/flash.c | 495
> -----------------
> board/ti/omap1610inn/lowlevel_init.S | 452 ----------------
> board/ti/omap1610inn/omap1610innovator.c | 309 -----------
> board/timll/devkit8000/devkit8000.c | 37 ++
> board/vpac270/onenand.c | 3 -
> board/zipitz2/zipitz2.c | 9 +
> boards.cfg | 10 +-
> common/Makefile | 4 +
> common/cmd_spl.c | 188 +++++++
> config.mk | 11 +-
> doc/README.PXA_CF | 56 --
> doc/README.commands.spl | 31 ++
> doc/README.mx6qsabrelite | 12 +-
> doc/SPL/README.omap3 | 74 +++
> doc/device-tree-bindings/README | 17 +
> .../clock/nvidia,tegra20-car.txt | 207 +++++++
> doc/device-tree-bindings/i2c/tegra20-i2c.txt | 23 +
> doc/device-tree-bindings/usb/tegra-usb.txt | 25 +
> drivers/dma/apbh_dma.c | 23 +-
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/i2c/Makefile | 1 +
> drivers/i2c/tegra_i2c.c | 569
> ++++++++++++++++++++
> drivers/misc/pmic_i2c.c | 6 +
> drivers/mmc/mmc.c | 102 ++++-
> drivers/mmc/mxsmmc.c | 70 ++-
> drivers/mtd/nand/mxs_nand.c | 53 ++-
> drivers/mtd/nand/omap_gpmc.c | 14 +-
> drivers/net/calxedaxgmac.c | 1 +
> drivers/net/fec_mxc.c | 277 +++++++---
> drivers/net/fec_mxc.h | 19 +-
> drivers/pcmcia/Makefile | 1 -
> drivers/pcmcia/pxa_pcmcia.c | 93 ----
> drivers/power/twl4030.c | 18 +-
> drivers/spi/mxs_spi.c | 6 +-
> drivers/spi/omap3_spi.c | 66 +++-
> drivers/spi/omap3_spi.h | 2 +
> drivers/usb/host/Makefile | 2 +
> drivers/usb/host/ehci-hcd.c | 7 +
> drivers/usb/host/ehci-mx6.c | 200 +++++++
> drivers/usb/host/ehci-mxs.c | 8 +-
> .../u-boot.lds => drivers/usb/host/ehci-tegra.c | 62 ++-
> drivers/usb/host/ehci.h | 6 +-
> examples/standalone/Makefile | 2 +-
> board/zipitz2/u-boot.lds => include/cmd_spl.h | 43 +--
> include/configs/actux1.h | 2 +
> include/configs/actux2.h | 2 +
> include/configs/actux3.h | 2 +
> include/configs/actux4.h | 2 +
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 13 +-
> include/configs/devkit8000.h | 15 +-
> include/configs/dvlhost.h | 2 +
> include/configs/ea20.h | 2 +
> include/configs/efikamx.h | 4 +-
> include/configs/highbank.h | 21 +-
> include/configs/m28evk.h | 3 +-
> include/configs/mt_ventoux.h | 10 +
> include/configs/mx28evk.h | 3 +
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 17 +
> include/configs/omap1610h2.h | 197 -------
> include/configs/omap1610inn.h | 202 -------
> include/configs/pdnb3.h | 2 +
> include/configs/seaboard.h | 20 +
> include/configs/tegra2-common.h | 13 +
> include/configs/twister.h | 12 +
> include/configs/ventana.h | 5 +
> include/configs/vision2.h | 2 +-
> include/configs/zipitz2.h | 14 +-
> include/fdtdec.h | 197 +++++++-
> include/image.h | 2 +
> include/net.h | 3 +-
> include/pcmcia.h | 3 +-
> lib/Makefile | 4 +
> lib/fdtdec.c | 323 +++++++++++-
> lib/fdtdec_test.c | 226 ++++++++
> spl/Makefile | 4 +
> tools/imximage.c | 18 +-
> tools/imximage.h | 1 +
> 198 files changed, 6109 insertions(+), 4188 deletions(-)
> delete mode 100644 arch/arm/cpu/arm1136/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm1176/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm720t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm920t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm925t/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm926ejs/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm946es/u-boot.lds
> delete mode 100644 arch/arm/cpu/arm_intcm/u-boot.lds
> create mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c
> create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl_ymodem.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
> delete mode 100644 arch/arm/cpu/lh7a40x/u-boot.lds
> delete mode 100644 arch/arm/cpu/pxa/u-boot.lds
> delete mode 100644 arch/arm/cpu/s3c44b0/u-boot.lds
> delete mode 100644 arch/arm/cpu/sa1100/u-boot.lds
> rename arch/arm/cpu/{armv7 => }/u-boot.lds (88%)
> create mode 100644 arch/arm/dts/skeleton.dtsi
> create mode 100644 arch/arm/dts/tegra20.dtsi
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
> create mode 100644 arch/arm/include/asm/bootm.h
> create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
> delete mode 100644 board/ti/omap1610inn/Makefile
> delete mode 100644 board/ti/omap1610inn/config.mk
> delete mode 100644 board/ti/omap1610inn/flash.c
> delete mode 100644 board/ti/omap1610inn/lowlevel_init.S
> delete mode 100644 board/ti/omap1610inn/omap1610innovator.c
> create mode 100644 common/cmd_spl.c
> delete mode 100644 doc/README.PXA_CF
> create mode 100644 doc/README.commands.spl
> create mode 100644 doc/SPL/README.omap3
> create mode 100644 doc/device-tree-bindings/README
> create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt
> create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt
> create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
> create mode 100644 drivers/i2c/tegra_i2c.c
> delete mode 100644 drivers/pcmcia/pxa_pcmcia.c
> create mode 100644 drivers/usb/host/ehci-mx6.c
> rename board/jornada/u-boot.lds => drivers/usb/host/ehci-tegra.c (53%)
> rename board/zipitz2/u-boot.lds => include/cmd_spl.h (56%)
> delete mode 100644 include/configs/omap1610h2.h
> delete mode 100644 include/configs/omap1610inn.h
> create mode 100644 lib/fdtdec_test.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are bugs and then there are bugs. And then there are bugs.
- Karl Lehenbauer
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-03-30 7:10 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 7cb30b13f12077c7eec8ce2419cd96cd65ace8e2:
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
(2012-03-23 21:59:16 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Anatolij Gustschin (4):
nhk8815: fix build errors
board/vpac270/onenand.c: Fix build errors
board/ti/beagle/beagle.c: Fix build warnings
arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
Andreas Bie?mann (1):
atmel-boards: add missing atmel_mci.h
Chander Kashyap (1):
EXYNOS: Add structure for Exynos4 DMC
Christian Riesch (1):
calimain, enbw_cmc: Fix typo in comments
David M?ller (ELSOFT AG) (1):
ARM: fix s3c2410 timer code
Dirk Behme (2):
mx6q: mx6qsabrelite: Update the README
imximage: Remove overwriting of flash_offset
Doug Anderson (1):
EXYNOS: SMDK5250: Support all 4 UARTs
Eric Nelson (6):
i.MX6: mx6qsabrelite: add ext2 support
mx6q: mx6qsabrelite: setup_spi() should be called in board_init
to allow use for environment
i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
net: force PKTALIGN to ARCH_DMA_MINALIGN
net: fec_mxc: allow use with cache enabled
Fabio Estevam (15):
mx51evk: Fix CONFIG_SYS_MEMTEST_END
mx53evk: Fix CONFIG_SYS_MEMTEST_END
mx53smd: Fix CONFIG_SYS_MEMTEST_END
efikamx: Fix CONFIG_SYS_MEMTEST_END
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
mx6: Fix reset cause for Power On Reset case
mx6: Remove duplicate definition of ANATOP_BASE_ADDR
pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
mxs_spi: Return proper timeout error
mx6: Read silicon revision from register
USB: ehci-mx6: Add proper IO accessors
mx28evk: Provide default values for SPI bus and chip select
configs: imx: Use CONFIG_SF_DEFAULT_CS
mx53: Make PLL2 to be the parent of UART clock
mx53ard: Initialize return code with error
Grazvydas Ignotas (1):
twl4030: fix potential power supply handling issues
Heiko Schocher (1):
ARM: davinci: fixes for cam_enc_4xx board
Helmut Raiger (1):
mx31: add "ARM11P power gating" to get_reset_cause
Jason Hobbs (1):
ARM: highbank: change env config to use nvram
Marek Vasut (23):
PXA: Remove PXA PCMCIA support
PXA: Fix warning in zipitz2
PXA: Fix missing get_tbclk() breaking vpac boards
M28: Fix LCD PINMUX
M28: Support for the old M28 SoM v1.0
i.MX28: Reformat the DRAM memory configuration data
Examples: Properly append LDFLAGS to LD command
IXP: Make IXP buildable with arm-linux- toolchains
IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
IXP: Squash warnings in IXP NPE
IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
IXP: Fix NAND build warning on PDNB3 and SCPU
IXP: Fix GPIO_INT_ACT_LOW_SET()
i.MX28: Enable additional DRAM address bits
i.MX28: Make the stabilization delays shorter
i.MX28: Drop __naked function from spl_mem_init
ARM926EJS: Implement cache operations
i.MX28: Add cache support into the APBH DMA driver
i.MX28: Add cache support to MXS NAND driver
MMC: Implement generic bounce buffer
i.MX28: Do data transfers via DMA in MMC driver
i.MX28: Make use of the bounce buffer
i.MX28: Enable caches by default
Matt Porter (2):
SPL: Add YMODEM over UART load support
SPL: Enable YMODEM support on BeagleBone and AM335x EVM
Rob Herring (8):
net: calxedaxgmac: fix build due to missing __aligned definition
ARM: highbank: fix warning for calxedaxgmac_initialize
ARM: highbank: add missing get_tbclk
ARM: highbank: fix us_to_tick calculation
ARM: highbank: change TEXT_BASE to 0x8000
ARM: highbank: Add boot counter support
ARM: highbank: add reset support
ARM: highbank: setup env from boot source register
Robert Delien (5):
i.mx28: Added register definitions for DIGCTL registers
i.mx28: Replaced magic numbers for scratch register addresses
with register definitions
Renamed mx28_register to mx28_register_32 to prepare for
mx28_register_8
Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and
hw_clkctrl_frac1 registers
Simon Glass (39):
arm: Remove jornada link script
fdt: Add fdtdec_find_aliases() to deal with alias nodes
fdt: Add tests for fdtdec
fdt: Tidy up a few fdtdec problems
fdt: Add functions to access phandles, arrays and bools
fdt: Add basic support for decoding GPIO definitions
arm: fdt: Add skeleton device tree file from kernel
tegra: fdt: Add Tegra2x device tree file from kernel
tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
fdt: Add staging area for device tree binding documentation
fdt: Add tegra-usb bindings file from linux
tegra: fdt: Add additional USB binding
tegra: fdt: Add clock bindings
tegra: fdt: Add clock bindings for Tegra2 Seaboard
tegra: usb: fdt: Add additional device tree definitions for USB ports
tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
usb: Add support for txfifo threshold
tegra: fdt: Add function to return peripheral/clock ID
tegra: usb: Add support for Tegra USB peripheral
fdt: Avoid early panic() when there is no FDT present
arm: Check for valid FDT after console is up
tegra: usb: Add USB support to nvidia boards
tegra: usb: Add common USB defines for tegra2 boards
tegra: usb: Enable USB on Seaboard
tegra: fdt: Enable FDT support for Seaboard
tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
fdt: Add function to allow aliases to refer to multiple nodes
tegra: Enhance clock support to handle 16-bit clock divisors
tegra: i2c: Initialise I2C on Nvidia boards
tegra: i2c: Select number of controllers for Tegra2 boards
tegra: i2c: Enable I2C on Seaboard
tegra: i2c: Select I2C ordering for Seaboard
tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Allow arch directory to contain .lds without requiring Makefile
arm: Remove zipitz2 link script
Define CPUDIR for the .lds link script
arm: Remove unneeded setting of LDCSRIPT
arm: add a common .lds link script
arm: Use common .lds file where possible
Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting
devkit8000/spl: init GPMC for dm9000 in SPL
omap-common/spl: Add linux boot to SPL
omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm
Stefano Babic (8):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL
NAND: TI: fix warnings in omap_gpmc.c
OMAP3: mt_ventoux: updated timing for FPGA
OMAP3: mt_ventoux: sets its own mtdparts
Davinci: ea20: use gpio framework to access gpios
Tom Rini (9):
.gitignore: Add .su files
config.mk: Make cc-option create a file under include/generated
config.mk: Check for -fstack-usage support
spl.c: Use __noreturn decorator
README: document more SPL config options
SPL: Add README.omap3
cam_enc_4xx: Rename 'images' to 'imgs'
sdrc.c: Fix typo in do_sdrc_init() for SPL
OMAP: Remove omap1610inn-based boards
Tom Warren (2):
arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer
load
tegra: fdt: Enable FDT support for Ventana
Vasily Khoruzhick (2):
zipitz2: fix boot issue introduced by PXA low level init rework
zipitz2: use pxa_mmc_gen as MMC driver
Wolfgang Grandegger (2):
usb/ehci: Add USB support for the MX6Q
mx6qsabrelite: add and enable USB Host 1 support
Yen Lin (1):
tegra: i2c: Add I2C driver
jacopo mondi (1):
omap3_spi: receive transmit mode
.gitignore | 1 +
MAINTAINERS | 1 -
Makefile | 25 +-
README | 72 +++-
arch/arm/config.mk | 7 -
arch/arm/cpu/arm1136/mx31/generic.c | 2 +
arch/arm/cpu/arm1136/u-boot.lds | 89 ---
arch/arm/cpu/arm1176/u-boot.lds | 78 ---
arch/arm/cpu/arm720t/u-boot.lds | 79 ---
arch/arm/cpu/arm920t/s3c24x0/timer.c | 64 +--
arch/arm/cpu/arm920t/u-boot.lds | 88 ---
arch/arm/cpu/arm925t/u-boot.lds | 83 ---
arch/arm/cpu/arm926ejs/cache.c | 66 ++-
arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +--
arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 24 +-
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 130 +++---
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
arch/arm/cpu/arm926ejs/nomadik/timer.c | 10 +
arch/arm/cpu/arm926ejs/u-boot.lds | 80 ---
arch/arm/cpu/arm946es/u-boot.lds | 80 ---
arch/arm/cpu/arm_intcm/u-boot.lds | 80 ---
arch/arm/cpu/armv7/Makefile | 2 -
arch/arm/cpu/armv7/cpu.c | 2 +
arch/arm/cpu/armv7/highbank/Makefile | 2 +-
arch/arm/cpu/armv7/highbank/bootcount.c | 36 ++
arch/arm/cpu/armv7/highbank/config.mk | 1 +
arch/arm/cpu/armv7/highbank/timer.c | 9 +-
arch/arm/cpu/armv7/imx-common/cpu.c | 25 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +-
arch/arm/cpu/armv7/mx6/clock.c | 13 +
arch/arm/cpu/armv7/mx6/soc.c | 8 +-
arch/arm/cpu/armv7/omap-common/Makefile | 3 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +-
arch/arm/cpu/armv7/omap-common/spl.c | 56 ++-
arch/arm/cpu/armv7/omap-common/spl_nand.c | 47 ++-
arch/arm/cpu/armv7/omap-common/spl_ymodem.c | 76 +++
arch/arm/cpu/armv7/omap3/board.c | 2 +
arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
arch/arm/cpu/armv7/tegra2/Makefile | 4 +-
arch/arm/cpu/armv7/tegra2/ap20.c | 20 +-
arch/arm/cpu/armv7/tegra2/board.c | 2 +-
arch/arm/cpu/armv7/tegra2/clock.c | 121 ++++-
arch/arm/cpu/armv7/tegra2/config.mk | 2 +
arch/arm/cpu/armv7/tegra2/usb.c | 460 ++++++++++++++++
arch/arm/cpu/ixp/config.mk | 3 +
arch/arm/cpu/ixp/npe/IxEthAcc.c | 2 +-
arch/arm/cpu/ixp/npe/IxEthDBAPISupport.c | 3 -
arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c | 3 -
arch/arm/cpu/lh7a40x/u-boot.lds | 80 ---
arch/arm/cpu/pxa/timer.c | 5 +
arch/arm/cpu/pxa/u-boot.lds | 86 ---
arch/arm/cpu/s3c44b0/u-boot.lds | 80 ---
arch/arm/cpu/sa1100/u-boot.lds | 83 ---
arch/arm/cpu/{armv7 => }/u-boot.lds | 15 +-
arch/arm/dts/skeleton.dtsi | 13 +
arch/arm/dts/tegra20.dtsi | 196 +++++++
arch/arm/include/asm/arch-exynos/dmc.h | 109 ++++
arch/arm/include/asm/arch-ixp/ixp425.h | 10 +-
arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx28/regs-apbh.h | 254 +++++-----
arch/arm/include/asm/arch-mx28/regs-bch.h | 42 +-
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++--
arch/arm/include/asm/arch-mx28/regs-common.h | 28 +-
arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 ++++++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 +-
arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 +-
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++--
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 +++---
arch/arm/include/asm/arch-mx28/regs-power.h | 28 +-
arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 +-
arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 +-
arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 +-
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 146 +++++-
arch/arm/include/asm/arch-tegra2/clk_rst.h | 10 +-
arch/arm/include/asm/arch-tegra2/clock.h | 13 +
arch/arm/include/asm/arch-tegra2/tegra2.h | 6 +-
arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 157 ++++++
arch/arm/include/asm/arch-tegra2/usb.h | 252 +++++++++
arch/arm/include/asm/bootm.h | 26 +
arch/arm/include/asm/omap_common.h | 5 +
arch/arm/lib/Makefile | 5 +-
arch/arm/lib/board.c | 8 +
arch/arm/lib/bootm.c | 349 ++++++------
board/actux1/actux1.c | 2 -
board/actux2/actux2.c | 2 -
board/actux3/actux3.c | 2 -
board/actux4/actux4.c | 2 -
board/ait/cam_enc_4xx/cam_enc_4xx.c | 103 +++--
board/ait/cam_enc_4xx/config.mk | 7 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 2 +-
board/davinci/ea20/ea20.c | 38 +-
board/denx/m28evk/spl_boot.c | 16 +-
board/dvlhost/dvlhost.c | 2 -
board/egnite/ethernut5/ethernut5.c | 1 +
board/emk/top9000/top9000.c | 1 +
board/enbw/enbw_cmc/enbw_cmc.c | 2 +-
board/freescale/mx53ard/mx53ard.c | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 31 +-
board/highbank/highbank.c | 23 +
board/nvidia/common/board.c | 19 +
board/nvidia/common/board.h | 6 +
board/nvidia/dts/tegra2-seaboard.dts | 92 ++++
board/nvidia/seaboard/seaboard.c | 6 +
board/omicron/calimain/calimain.c | 2 +-
board/prodrive/pdnb3/nand.c | 16 +-
board/prodrive/pdnb3/pdnb3.c | 3 -
board/samsung/smdk5250/smdk5250.c | 44 ++-
board/technexion/twister/twister.c | 23 +
board/teejet/mt_ventoux/mt_ventoux.h | 11 +-
board/ti/beagle/beagle.c | 3 +-
board/ti/omap1610inn/Makefile | 45 --
board/ti/omap1610inn/config.mk | 26 -
board/ti/omap1610inn/flash.c | 495
-----------------
board/ti/omap1610inn/lowlevel_init.S | 452 ----------------
board/ti/omap1610inn/omap1610innovator.c | 309 -----------
board/timll/devkit8000/devkit8000.c | 37 ++
board/vpac270/onenand.c | 3 -
board/zipitz2/zipitz2.c | 9 +
boards.cfg | 10 +-
common/Makefile | 4 +
common/cmd_spl.c | 188 +++++++
config.mk | 11 +-
doc/README.PXA_CF | 56 --
doc/README.commands.spl | 31 ++
doc/README.mx6qsabrelite | 12 +-
doc/SPL/README.omap3 | 74 +++
doc/device-tree-bindings/README | 17 +
.../clock/nvidia,tegra20-car.txt | 207 +++++++
doc/device-tree-bindings/i2c/tegra20-i2c.txt | 23 +
doc/device-tree-bindings/usb/tegra-usb.txt | 25 +
drivers/dma/apbh_dma.c | 23 +-
drivers/gpio/mxs_gpio.c | 16 +-
drivers/i2c/Makefile | 1 +
drivers/i2c/tegra_i2c.c | 569
++++++++++++++++++++
drivers/misc/pmic_i2c.c | 6 +
drivers/mmc/mmc.c | 102 ++++-
drivers/mmc/mxsmmc.c | 70 ++-
drivers/mtd/nand/mxs_nand.c | 53 ++-
drivers/mtd/nand/omap_gpmc.c | 14 +-
drivers/net/calxedaxgmac.c | 1 +
drivers/net/fec_mxc.c | 277 +++++++---
drivers/net/fec_mxc.h | 19 +-
drivers/pcmcia/Makefile | 1 -
drivers/pcmcia/pxa_pcmcia.c | 93 ----
drivers/power/twl4030.c | 18 +-
drivers/spi/mxs_spi.c | 6 +-
drivers/spi/omap3_spi.c | 66 +++-
drivers/spi/omap3_spi.h | 2 +
drivers/usb/host/Makefile | 2 +
drivers/usb/host/ehci-hcd.c | 7 +
drivers/usb/host/ehci-mx6.c | 200 +++++++
drivers/usb/host/ehci-mxs.c | 8 +-
.../u-boot.lds => drivers/usb/host/ehci-tegra.c | 62 ++-
drivers/usb/host/ehci.h | 6 +-
examples/standalone/Makefile | 2 +-
board/zipitz2/u-boot.lds => include/cmd_spl.h | 43 +--
include/configs/actux1.h | 2 +
include/configs/actux2.h | 2 +
include/configs/actux3.h | 2 +
include/configs/actux4.h | 2 +
include/configs/am335x_evm.h | 1 +
include/configs/cam_enc_4xx.h | 13 +-
include/configs/devkit8000.h | 15 +-
include/configs/dvlhost.h | 2 +
include/configs/ea20.h | 2 +
include/configs/efikamx.h | 4 +-
include/configs/highbank.h | 21 +-
include/configs/m28evk.h | 3 +-
include/configs/mt_ventoux.h | 10 +
include/configs/mx28evk.h | 3 +
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qsabrelite.h | 17 +
include/configs/omap1610h2.h | 197 -------
include/configs/omap1610inn.h | 202 -------
include/configs/pdnb3.h | 2 +
include/configs/seaboard.h | 20 +
include/configs/tegra2-common.h | 13 +
include/configs/twister.h | 12 +
include/configs/ventana.h | 5 +
include/configs/vision2.h | 2 +-
include/configs/zipitz2.h | 14 +-
include/fdtdec.h | 197 +++++++-
include/image.h | 2 +
include/net.h | 3 +-
include/pcmcia.h | 3 +-
lib/Makefile | 4 +
lib/fdtdec.c | 323 +++++++++++-
lib/fdtdec_test.c | 226 ++++++++
spl/Makefile | 4 +
tools/imximage.c | 18 +-
tools/imximage.h | 1 +
198 files changed, 6109 insertions(+), 4188 deletions(-)
delete mode 100644 arch/arm/cpu/arm1136/u-boot.lds
delete mode 100644 arch/arm/cpu/arm1176/u-boot.lds
delete mode 100644 arch/arm/cpu/arm720t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm920t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm925t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm926ejs/u-boot.lds
delete mode 100644 arch/arm/cpu/arm946es/u-boot.lds
delete mode 100644 arch/arm/cpu/arm_intcm/u-boot.lds
create mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c
create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_ymodem.c
create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
delete mode 100644 arch/arm/cpu/lh7a40x/u-boot.lds
delete mode 100644 arch/arm/cpu/pxa/u-boot.lds
delete mode 100644 arch/arm/cpu/s3c44b0/u-boot.lds
delete mode 100644 arch/arm/cpu/sa1100/u-boot.lds
rename arch/arm/cpu/{armv7 => }/u-boot.lds (88%)
create mode 100644 arch/arm/dts/skeleton.dtsi
create mode 100644 arch/arm/dts/tegra20.dtsi
create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h
create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
create mode 100644 arch/arm/include/asm/bootm.h
create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
delete mode 100644 board/ti/omap1610inn/Makefile
delete mode 100644 board/ti/omap1610inn/config.mk
delete mode 100644 board/ti/omap1610inn/flash.c
delete mode 100644 board/ti/omap1610inn/lowlevel_init.S
delete mode 100644 board/ti/omap1610inn/omap1610innovator.c
create mode 100644 common/cmd_spl.c
delete mode 100644 doc/README.PXA_CF
create mode 100644 doc/README.commands.spl
create mode 100644 doc/SPL/README.omap3
create mode 100644 doc/device-tree-bindings/README
create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt
create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt
create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
create mode 100644 drivers/i2c/tegra_i2c.c
delete mode 100644 drivers/pcmcia/pxa_pcmcia.c
create mode 100644 drivers/usb/host/ehci-mx6.c
rename board/jornada/u-boot.lds => drivers/usb/host/ehci-tegra.c (53%)
rename board/zipitz2/u-boot.lds => include/cmd_spl.h (56%)
delete mode 100644 include/configs/omap1610h2.h
delete mode 100644 include/configs/omap1610inn.h
create mode 100644 lib/fdtdec_test.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-02-27 20:23 Albert ARIBAUD
@ 2012-03-03 14:09 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-03-03 14:09 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4F4BE62C.1000402@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-microblaze
> (2012-02-26 22:17:40 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> Aneesh V (1):
> armv7: omap3: leave outer cache enabled
>
> Chase Maupin (1):
> am33xx: ddr_defs.h: Change DDR timings
>
> Daniel Gorsulowski (2):
> at91: modified NAND flash timing on meesc board
> at91: modified NAND flash timing on otc570 board
>
> Detlev Zundel (1):
> mcx: Enable command line editing
>
> Eric Nelson (6):
> mx6q: define GPIO macros for translating between ordinals and
> port:index
> mxc_spi: move machine specifics into CPU headers
> mx6q: Add support for ECSPI through mxc_spi driver
> mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
> mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
> mx6q: mx6qsabrelite: Conditionally define macros for environment
> in serial flash
>
> Fabio Estevam (7):
> mx53loco: Use gpio_direction_input prior to gpio_get_value
> mx53ard: Use gpio_direction_input prior to gpio_get_value
> mx53evk: Use gpio_direction_input prior to gpio_get_value
> mx53smd: Use gpio_direction_input prior to gpio_get_value
> mx51evk: Use gpio_direction_input prior to gpio_get_value
> mx35: generic: Let get_reset_cause be defined only when
> CONFIG_DISPLAY_CPUINFO is selected
> mx35pdk: Remove duplicate CPU revision and reset cause information
>
> Hadli, Manjunath (3):
> davinci: cleanup davinci_sync_env_enetaddr() fucntion
> da850evm: add support to read mac address from SPI flash
> da850evm: read mac address from I2C EEPROM on AM18x EVM
>
> Helmut Raiger (3):
> tt01: fix environment size
> tt01: add video support
> tt01: fix hush parser config, add release config
>
> Linus Walleij (3):
> integrator: stop calling pci_init() twice
> integrator: rewrite the AP PCI driver
> integrator: update the Integrator/CP config
>
> Marek Vasut (2):
> i.MX28: Fix VDDIO and VDDA setup
> MX28: Fix get_timer() / get_tbclk() issue
>
> Matthias Fuchs (4):
> mx28evk: add RTC support
> mx28evk: add USB support
> mx28evk: add SPI support
> mx28: fix SPL code to make USB booting work
>
> Peter Meerwald (1):
> beagle: enable DVI_PUP
>
> Shawn Guo (1):
> common/image.c: align usage of fdt_high with initrd_high
>
> Stefano Babic (4):
> MX35: add missing get_ticks() and get_tbclk()
> MX31: add missing get_tbclk()
> MX5/MX6: add missing get_ticks() and get_tbclk()
> MX27: add missing get_tbclk()
>
> Thomas Weber (2):
> Tricorder: Switch env to generic mmc driver
> OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL
>
> Tom Rini (2):
> am335x_evm: Change MAINTAINERS entry
> omap3_beagle: Change MAINTAINERS entry
>
> Troy Kisky (5):
> net: fec_mxc: add 1000 Mbps selection
> net: fec_mxc: add PHYLIB support
> net: phy: add support for Micrel's KSZ9021
> net: phy: make board_phy_config responsible for calling drv->config
> i.mx6q: mx6qsabrelite: Update the network configuration
>
> prabhakar.csengg at gmail.com (1):
> dm6467Tevm: Use a common configuration file for davinci_dm6467evm
> and davinci_dm6467Tevm
>
> MAINTAINERS | 10 +-
> README | 8 +
> arch/arm/cpu/arm1136/mx31/timer.c | 9 +
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm1136/mx35/timer.c | 103 +++--
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/misc.c | 9 +-
> arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +-
> arch/arm/cpu/arm926ejs/mx28/start.S | 21 +-
> arch/arm/cpu/arm926ejs/mx28/timer.c | 19 +-
> arch/arm/cpu/armv7/imx-common/timer.c | 75 +++-
> arch/arm/cpu/armv7/omap3/board.c | 2 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 27 ++
> arch/arm/include/asm/arch-mx31/sys_proto.h | 1 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 25 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 30 ++
> arch/arm/include/asm/arch-mx6/imx-regs.h | 49 ++
> board/armltd/integrator/integrator.c | 3 -
> board/armltd/integrator/pci.c | 582
> ++++++++++++++-----------
> board/armltd/integrator/pci_v3.h | 200 +++++++++
> board/davinci/da8xxevm/da850evm.c | 103 +++++
> board/davinci/dm6467evm/dm6467evm.c | 2 +-
> board/esd/meesc/meesc.c | 8 +-
> board/esd/otc570/otc570.c | 8 +-
> board/freescale/corenet_ds/eth_p4080.c | 2 +
> board/freescale/mpc8544ds/mpc8544ds.c | 2 +
> board/freescale/mx28evk/iomux.c | 8 +
> board/freescale/mx28evk/mx28evk.c | 7 +
> board/freescale/mx35pdk/mx35pdk.c | 27 +--
> board/freescale/mx51evk/mx51evk.c | 2 +
> board/freescale/mx53ard/mx53ard.c | 2 +
> board/freescale/mx53evk/mx53evk.c | 2 +
> board/freescale/mx53loco/mx53loco.c | 2 +
> board/freescale/mx53smd/mx53smd.c | 1 +
> board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 68 ++--
> board/hale/tt01/tt01.c | 21 +
> board/ti/beagle/beagle.c | 34 ++
> boards.cfg | 8 +-
> common/image.c | 12 +-
> drivers/net/fec_mxc.c | 165 +++++---
> drivers/net/fec_mxc.h | 7 +
> drivers/net/phy/micrel.c | 87 ++++
> drivers/net/phy/phy.c | 5 +-
> drivers/spi/mxc_spi.c | 93 +----
> include/configs/davinci_dm6467Tevm.h | 167 -------
> include/configs/davinci_dm6467evm.h | 1 -
> include/configs/integratorap.h | 148 +------
> include/configs/integratorcp.h | 47 +--
> include/configs/mcx.h | 7 +-
> include/configs/mx28evk.h | 64 +++-
> include/configs/mx6qsabrelite.h | 31 ++-
> include/configs/omap3_overo.h | 4 -
> include/configs/tricorder.h | 12 +-
> include/configs/tt01.h | 40 ++-
> include/micrel.h | 16 +
> include/phy.h | 1 +
> 59 files changed, 1495 insertions(+), 921 deletions(-)
> create mode 100644 board/armltd/integrator/pci_v3.h
> delete mode 100644 include/configs/davinci_dm6467Tevm.h
> create mode 100644 include/micrel.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wisdom is one of the few things that looks bigger the further away it
is. - Terry Pratchett, _Witches Abroad_
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-02-27 20:23 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5:
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
(2012-02-26 22:17:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Aneesh V (1):
armv7: omap3: leave outer cache enabled
Chase Maupin (1):
am33xx: ddr_defs.h: Change DDR timings
Daniel Gorsulowski (2):
at91: modified NAND flash timing on meesc board
at91: modified NAND flash timing on otc570 board
Detlev Zundel (1):
mcx: Enable command line editing
Eric Nelson (6):
mx6q: define GPIO macros for translating between ordinals and
port:index
mxc_spi: move machine specifics into CPU headers
mx6q: Add support for ECSPI through mxc_spi driver
mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
mx6q: mx6qsabrelite: Conditionally define macros for environment
in serial flash
Fabio Estevam (7):
mx53loco: Use gpio_direction_input prior to gpio_get_value
mx53ard: Use gpio_direction_input prior to gpio_get_value
mx53evk: Use gpio_direction_input prior to gpio_get_value
mx53smd: Use gpio_direction_input prior to gpio_get_value
mx51evk: Use gpio_direction_input prior to gpio_get_value
mx35: generic: Let get_reset_cause be defined only when
CONFIG_DISPLAY_CPUINFO is selected
mx35pdk: Remove duplicate CPU revision and reset cause information
Hadli, Manjunath (3):
davinci: cleanup davinci_sync_env_enetaddr() fucntion
da850evm: add support to read mac address from SPI flash
da850evm: read mac address from I2C EEPROM on AM18x EVM
Helmut Raiger (3):
tt01: fix environment size
tt01: add video support
tt01: fix hush parser config, add release config
Linus Walleij (3):
integrator: stop calling pci_init() twice
integrator: rewrite the AP PCI driver
integrator: update the Integrator/CP config
Marek Vasut (2):
i.MX28: Fix VDDIO and VDDA setup
MX28: Fix get_timer() / get_tbclk() issue
Matthias Fuchs (4):
mx28evk: add RTC support
mx28evk: add USB support
mx28evk: add SPI support
mx28: fix SPL code to make USB booting work
Peter Meerwald (1):
beagle: enable DVI_PUP
Shawn Guo (1):
common/image.c: align usage of fdt_high with initrd_high
Stefano Babic (4):
MX35: add missing get_ticks() and get_tbclk()
MX31: add missing get_tbclk()
MX5/MX6: add missing get_ticks() and get_tbclk()
MX27: add missing get_tbclk()
Thomas Weber (2):
Tricorder: Switch env to generic mmc driver
OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL
Tom Rini (2):
am335x_evm: Change MAINTAINERS entry
omap3_beagle: Change MAINTAINERS entry
Troy Kisky (5):
net: fec_mxc: add 1000 Mbps selection
net: fec_mxc: add PHYLIB support
net: phy: add support for Micrel's KSZ9021
net: phy: make board_phy_config responsible for calling drv->config
i.mx6q: mx6qsabrelite: Update the network configuration
prabhakar.csengg at gmail.com (1):
dm6467Tevm: Use a common configuration file for davinci_dm6467evm
and davinci_dm6467Tevm
MAINTAINERS | 10 +-
README | 8 +
arch/arm/cpu/arm1136/mx31/timer.c | 9 +
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm1136/mx35/timer.c | 103 +++--
arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 +-
arch/arm/cpu/arm926ejs/davinci/misc.c | 9 +-
arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +-
arch/arm/cpu/arm926ejs/mx28/start.S | 21 +-
arch/arm/cpu/arm926ejs/mx28/timer.c | 19 +-
arch/arm/cpu/armv7/imx-common/timer.c | 75 +++-
arch/arm/cpu/armv7/omap3/board.c | 2 +-
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 27 ++
arch/arm/include/asm/arch-mx31/sys_proto.h | 1 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 25 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 30 ++
arch/arm/include/asm/arch-mx6/imx-regs.h | 49 ++
board/armltd/integrator/integrator.c | 3 -
board/armltd/integrator/pci.c | 582
++++++++++++++-----------
board/armltd/integrator/pci_v3.h | 200 +++++++++
board/davinci/da8xxevm/da850evm.c | 103 +++++
board/davinci/dm6467evm/dm6467evm.c | 2 +-
board/esd/meesc/meesc.c | 8 +-
board/esd/otc570/otc570.c | 8 +-
board/freescale/corenet_ds/eth_p4080.c | 2 +
board/freescale/mpc8544ds/mpc8544ds.c | 2 +
board/freescale/mx28evk/iomux.c | 8 +
board/freescale/mx28evk/mx28evk.c | 7 +
board/freescale/mx35pdk/mx35pdk.c | 27 +--
board/freescale/mx51evk/mx51evk.c | 2 +
board/freescale/mx53ard/mx53ard.c | 2 +
board/freescale/mx53evk/mx53evk.c | 2 +
board/freescale/mx53loco/mx53loco.c | 2 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 68 ++--
board/hale/tt01/tt01.c | 21 +
board/ti/beagle/beagle.c | 34 ++
boards.cfg | 8 +-
common/image.c | 12 +-
drivers/net/fec_mxc.c | 165 +++++---
drivers/net/fec_mxc.h | 7 +
drivers/net/phy/micrel.c | 87 ++++
drivers/net/phy/phy.c | 5 +-
drivers/spi/mxc_spi.c | 93 +----
include/configs/davinci_dm6467Tevm.h | 167 -------
include/configs/davinci_dm6467evm.h | 1 -
include/configs/integratorap.h | 148 +------
include/configs/integratorcp.h | 47 +--
include/configs/mcx.h | 7 +-
include/configs/mx28evk.h | 64 +++-
include/configs/mx6qsabrelite.h | 31 ++-
include/configs/omap3_overo.h | 4 -
include/configs/tricorder.h | 12 +-
include/configs/tt01.h | 40 ++-
include/micrel.h | 16 +
include/phy.h | 1 +
59 files changed, 1495 insertions(+), 921 deletions(-)
create mode 100644 board/armltd/integrator/pci_v3.h
delete mode 100644 include/configs/davinci_dm6467Tevm.h
create mode 100644 include/micrel.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-02-12 9:16 Albert ARIBAUD
@ 2012-02-12 21:06 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-02-12 21:06 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4F37835D.7020705@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 9cbfee6dc200cc746394c7efc10253a24f3ce108:
>
> fw_env.h: fix comment (2012-02-11 22:18:38 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Albert ARIBAUD (5):
> edminiv2: add hush parser, cmdline editing and long help
> Rename ehci-kirkwood as ehci-marvell
> Remove kirkwood-specifics from marvell EHCI driver
> orion5x: add USB host ehci-marvell support
> edminiv2: add USB host support
>
> Amit Virdi (1):
> ARM: Convert spear3xx and spear6xx boards to boards.cfg
>
> Aneesh V (1):
> OMAP4460: Reduce MPU clock speed from 920 to 700
>
> Ben Gardiner (1):
> arm, davinci: add PLL0 prediv to da850 lowlevel setup
>
> Chander Kashyap (8):
> Exynos: PWM: Add TCMPB3 field in pwm structure
> Exynos: Fix ARM Clock frequency calculation
> Origen: Select SCLKMPLL as FIMD0 parent clock
> Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
> ARM: EXYNOS: Add support for Exynos5 based SoCs
> EXYNOS: Add SMDK5250 board support
> EXYNOS: SMDK5250: Add MMC SPL support
> SMDK5250: Add ethernet support
>
> Christian Riesch (5):
> arm, davinci: Add lowlevel_init for SoCs other than DM644X
> arm, arm926ejs: Do cpu critical inits only for boards that require it
> arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
> arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is
> not defined
> arm, davinci: Add support for the Calimain board from OMICRON
> electronics
>
> David M?ller (ELSOFT AG) (1):
> ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
>
> Dechesne, Nicolas (1):
> OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()
>
> Dirk Behme (4):
> imximage: Add MX53 to the documentation
> imximage: Add support for i.MX6
> imximage: Sort bootops alphabetically
> i.mx6q: configs: Add fdt_high and initrd_high variables
>
> Fabio Estevam (3):
> sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
> configs: Remove CONFIG_NET_MULTI from board files
> mx28: Show CPU frequency
>
> Govindraj.R (6):
> usb: ulpi: Extend the existing ulpi framework.
> usb: ulpi: Add omap-ulpi-view port support
> ehci-omap: Clean up added ehci-omap.c
> OMAP3+: Clock: Adding ehci clock enabling
> OMAP4: clock-common: Move the usb dppl configuration to new func
> OMAP4: ehci-omap: enable ehci-omap for panda boards
>
> Hadli, Manjunath (2):
> davinci: remove macro CONFIG_DISPLAY_CPUINFO
> davinci: add support for printing clock frequency
>
> Heiko Schocher (7):
> arm, davinci: add workaround for not resetting DMA bus and VPSS
> modules
> arm, davinci: add timer defines for tcr field
> common: add possibility for readline_into_buffer timeout
> common, menu: add statusline support
> common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
> common, menu: do not trigger timeout again, if a line is read
> arm, davinci: cam_enc_4xx board updates
>
> Helmut Raiger (3):
> mmc: access mxcmmc from mx31 boards
> mc13783.h: create and add regulator mode 0 and 1
> tt01: add MMC support
>
> HeungJun, Kim (3):
> ARMV7: Exynos4: Add watchdog.h for Exynos4
> ARMV7: Exynos4: Add supoort power for Exynos4
> ARMV7: Exynos4: Add support for TRATS board
>
> Holger Brunck (2):
> arm/km: speed up i2c access for keymile boards
> arm/km: checkpatch cleanup
>
> Ian Campbell (1):
> kirkwood_spi: correct access to irq_mask register
>
> Ilya Yanok (2):
> ehci-omap: driver for EHCI host on OMAP3
> mcx: support for HTKW mcx board
>
> Jason Liu (2):
> i.mx6q: mx6qsabrelite: Add the ethernet function support
> i.mx: i.mx5: update imx_get_mac_from_fuse function
>
> Matthias Fuchs (1):
> mx28: fix i.MX28 spi driver
>
> Michael Walle (1):
> arm, arm-kirkwood: disable l2c before linux boot
>
> Minkyu Kang (4):
> ORIGEN: remove duplicated MACH_TYPE define
> S5P: support generic watchdog timer
> TRATS: use the generic watchdog timer
> TRATS: set gpio of UART correctly
>
> Pali Roh?r (1):
> arm: omap3: Define save_boot_params in lowlevel_init.S for SPL only
>
> Peter Barada (2):
> omap3logic: Add missing GPMC pinmux for LAN92xx access
> ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
>
> Peter Meerwald (3):
> beagle: fix typos
> omap3: fix comment typos
> doc: fix typos
>
> Prafulla Wadaskar (1):
> bugfix: all Marvell specific build fails due to undefined
> reference to `get_ticks'
>
> Schuyler Patton (1):
> AM3517: Changed default clock rate for AM3517
>
> Simon Glass (9):
> tegra: Adjust funcmux config test to permit expansion
> tegra: Add enum to select from available funcmux configs
> tegra: Add I2C support to funcmux
> tegra: Add SDMMC support to funcmux
> tegra: Use funcmux for MMC on tamonten
> tegra: Use funcmux for MMC on harmony
> tegra: Use funcmux for MMC on seaboard
> tegra: mmc: Support operation with dcache enabled
> tegra2: Enable data cache
>
> Stefan (1):
> kirkwood: add support for D-Link DNS-325
>
> Stefano Babic (3):
> imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
> OMAP3: TAM3517: update ehci interface
> ARM: omap3: Added Teejet mt_ventoux
>
> Stephen Warren (3):
> tegra2: Fix conflicting pinmux for UARTA
> tegra2: Fix default RAM size selection in odmdata
> tegra2: Add support for Compal Paz00 (Toshiba AC100)
>
> Sughosh Ganu (2):
> arm, arm926ejs: Flush the data cache before disabling it
> Changes to move hawkboard to the new spl infrastructure
>
> Thomas Weber (1):
> OMAP3: Add Corscience Tricorder board
>
> Tom Rini (1):
> OMAP3: Correct get_sdr_cs_offset mask
>
> Troy Kisky (2):
> i.mx6: mx6x_pins: Fix uart txd definitions
> i.mx6q: mx6qsabrelite: Setup uart1 pinmux
>
> Yegor Yefremov (1):
> am3517evm: remove rootfstype kernel parameter for MMC boot device
>
> robertcnelson at gmail.com (1):
> Beagleboard: Correct memory size on rev C4
>
> MAINTAINERS | 21 +
> Makefile | 9 +-
> README | 6 +
> arch/arm/cpu/arm1136/mx31/generic.c | 1 +
> arch/arm/cpu/arm926ejs/armada100/timer.c | 18 +
> arch/arm/cpu/arm926ejs/cache.c | 9 +
> arch/arm/cpu/arm926ejs/cpu.c | 2 +
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 76 +--
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 31 +-
> arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 52 ++-
> arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 4 +
> arch/arm/cpu/arm926ejs/davinci/spl.c | 4 +-
> arch/arm/cpu/arm926ejs/kirkwood/Makefile | 1 +
> arch/arm/cpu/arm926ejs/kirkwood/cache.c | 34 +
> arch/arm/cpu/arm926ejs/kirkwood/timer.c | 18 +
> arch/arm/cpu/arm926ejs/mx27/generic.c | 35 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 3 +-
> arch/arm/cpu/arm926ejs/orion5x/timer.c | 18 +
> arch/arm/cpu/arm926ejs/pantheon/timer.c | 18 +
> arch/arm/cpu/arm926ejs/start.S | 28 +-
> arch/arm/cpu/armv7/exynos/clock.c | 229 +++++++-
> arch/arm/cpu/armv7/mx5/soc.c | 2 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 54 +-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 2 +
> arch/arm/cpu/armv7/omap3/board.c | 8 +-
> arch/arm/cpu/armv7/omap3/clock.c | 20 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 4 +-
> arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
> arch/arm/cpu/armv7/omap4/clocks.c | 27 +-
> arch/arm/cpu/armv7/s5p-common/Makefile | 1 +
> arch/arm/cpu/armv7/s5p-common/wdt.c | 59 ++
> arch/arm/cpu/armv7/tegra2/board.c | 12 +-
> arch/arm/cpu/armv7/tegra2/funcmux.c | 152 ++++-
> arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 9 +
> arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 1 -
> arch/arm/include/asm/arch-davinci/hardware.h | 9 +
> arch/arm/include/asm/arch-davinci/pll_defs.h | 3 +-
> arch/arm/include/asm/arch-davinci/timer_defs.h | 16 +
> arch/arm/include/asm/arch-exynos/clock.h | 326 ++++++++++
> arch/arm/include/asm/arch-exynos/cpu.h | 36 +-
> arch/arm/include/asm/arch-exynos/dmc.h | 146 +++++
> arch/arm/include/asm/arch-exynos/gpio.h | 99 +++-
> arch/arm/include/asm/arch-exynos/power.h | 230 +++++++
> arch/arm/include/asm/arch-exynos/pwm.h | 2 +-
> arch/arm/include/asm/arch-exynos/tzpc.h | 52 ++
> arch/arm/include/asm/arch-exynos/watchdog.h | 57 ++
> arch/arm/include/asm/arch-kirkwood/config.h | 2 +-
> arch/arm/include/asm/arch-kirkwood/kirkwood.h | 12 +
> arch/arm/include/asm/arch-mx27/clock.h | 22 +-
> arch/arm/include/asm/arch-mx31/clock.h | 3 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 11 +
> arch/arm/include/asm/arch-mx31/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 36 +-
> arch/arm/include/asm/arch-omap3/clocks_omap3.h | 2 +-
> .../asm/arch-omap3/{ehci_omap3.h => ehci.h} | 45 +-
> arch/arm/include/asm/arch-omap3/mem.h | 57 +-
> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap4/ehci.h | 49 ++
> arch/arm/include/asm/arch-orion5x/orion5x.h | 12 +
> arch/arm/include/asm/arch-s5pc1xx/cpu.h | 1 +
> arch/arm/include/asm/arch-s5pc1xx/watchdog.h | 58 ++
> arch/arm/include/asm/arch-tegra2/funcmux.h | 30 +-
> arch/arm/include/asm/ehci-omap.h | 142 +++++
> arch/arm/include/asm/u-boot.h | 3 +
> arch/arm/lib/board.c | 10 +-
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 667
> +++++++++++++++++++-
> board/ait/cam_enc_4xx/ublimage.cfg | 3 +-
> board/avionic-design/common/tamonten.c | 10 +-
> board/compal/paz00/Makefile | 41 ++
> board/compal/paz00/paz00.c | 81 +++
> board/corscience/tricorder/Makefile | 46 ++
> board/corscience/tricorder/tricorder.c | 105 +++
> board/corscience/tricorder/tricorder.h | 375 +++++++++++
> board/d-link/dns325/Makefile | 49 ++
> board/d-link/dns325/dns325.c | 148 +++++
> board/d-link/dns325/dns325.h | 48 ++
> board/d-link/dns325/kwbimage.cfg | 208 ++++++
> board/davinci/da8xxevm/da850evm.c | 4 +-
> board/davinci/da8xxevm/hawkboard.c | 23 +
> board/davinci/da8xxevm/hawkboard_nand_spl.c | 115 ----
> .../{u-boot-spl.lds => u-boot-spl-da850evm.lds} | 0
> .../davinci/da8xxevm/u-boot-spl-hawk.lds | 22 +-
> board/efikamx/efikamx-usb.c | 24 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 13 +-
> board/freescale/common/Makefile | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 9 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 114 ++++
> board/hale/tt01/tt01.c | 34 +-
> board/htkw/mcx/Makefile | 38 ++
> board/htkw/mcx/mcx.c | 112 ++++
> board/htkw/mcx/mcx.h | 408 ++++++++++++
> board/keymile/km_arm/km_arm.c | 23 +-
> board/logicpd/omap3som/omap3logic.c | 15 +
> board/nvidia/harmony/harmony.c | 19 +-
> board/nvidia/seaboard/seaboard.c | 21 +-
> board/omicron/calimain/Makefile | 45 ++
> board/omicron/calimain/calimain.c | 188 ++++++
> board/samsung/origen/lowlevel_init.S | 5 +
> board/samsung/origen/origen_setup.h | 12 +
> board/samsung/smdk5250/Makefile | 58 ++
> board/samsung/smdk5250/clock_init.c | 202 ++++++
> board/samsung/smdk5250/dmc_init.c | 462 ++++++++++++++
> board/samsung/smdk5250/lowlevel_init.S | 96 +++
> board/samsung/smdk5250/mmc_boot.c | 58 ++
> board/samsung/smdk5250/setup.h | 451 +++++++++++++
> board/samsung/smdk5250/smdk5250.c | 240 +++++++
> board/samsung/smdk5250/tzpc_init.c | 48 ++
> board/samsung/trats/Makefile | 43 ++
> board/samsung/trats/setup.h | 637
> +++++++++++++++++++
> board/samsung/trats/trats.c | 366 +++++++++++
> board/technexion/twister/twister.c | 22 +
> board/teejet/mt_ventoux/Makefile | 38 ++
> board/teejet/mt_ventoux/mt_ventoux.c | 233 +++++++
> board/teejet/mt_ventoux/mt_ventoux.h | 429 +++++++++++++
> board/ti/beagle/beagle.c | 116 +---
> board/ti/beagle/beagle.h | 4 +-
> board/ti/panda/panda.c | 38 ++
> board/ti/panda/panda_mux_data.h | 16 +-
> boards.cfg | 13 +-
> common/cmd_bdinfo.c | 9 +
> common/cmd_nvedit.c | 2 +-
> common/main.c | 24 +-
> common/menu.c | 15 +-
> doc/README.SPL | 4 +-
> doc/README.hawkboard | 43 +-
> doc/README.imximage | 13 +-
> doc/README.menu | 10 +
> doc/README.omap-ulpi-viewport | 27 +
> drivers/mmc/mxcmmc.c | 8 +-
> drivers/mmc/tegra2_mmc.c | 16 +
> drivers/spi/kirkwood_spi.c | 2 +-
> drivers/spi/mxs_spi.c | 12 +-
> drivers/usb/host/Makefile | 3 +-
> .../usb/host/{ehci-kirkwood.c => ehci-marvell.c} | 36 +-
> drivers/usb/host/ehci-omap.c | 255 ++++++++
> drivers/usb/ulpi/Makefile | 1 +
> drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++
> drivers/usb/ulpi/ulpi-viewport.c | 32 +-
> drivers/usb/ulpi/ulpi.c | 54 +-
> include/common.h | 4 +-
> include/configs/MPC8536DS.h | 1 +
> include/configs/P1010RDB.h | 5 +-
> include/configs/P1_P2_RDB.h | 1 +
> include/configs/P2020COME.h | 1 +
> include/configs/P2020DS.h | 1 +
> include/configs/P2041RDB.h | 1 +
> include/configs/PM826.h | 2 -
> include/configs/PM828.h | 2 -
> include/configs/VCMA9.h | 3 +-
> include/configs/am3517_evm.h | 3 +-
> include/configs/calimain.h | 363 +++++++++++
> include/configs/cam_enc_4xx.h | 143 ++++-
> include/configs/coreboot.h | 6 -
> include/configs/corenet_ds.h | 1 +
> include/configs/da830evm.h | 4 +
> include/configs/da850evm.h | 11 +-
> include/configs/davinci_dm355evm.h | 5 +-
> include/configs/davinci_dm355leopard.h | 5 +-
> include/configs/davinci_dm365evm.h | 4 +
> include/configs/davinci_dm6467Tevm.h | 5 +-
> include/configs/davinci_dm6467evm.h | 5 +-
> include/configs/davinci_dvevm.h | 6 +-
> include/configs/davinci_schmoogie.h | 5 +-
> include/configs/davinci_sffsdr.h | 5 +-
> include/configs/davinci_sonata.h | 5 +-
> include/configs/dns325.h | 188 ++++++
> include/configs/ea20.h | 4 +
> include/configs/ecovec.h | 1 -
> include/configs/edminiv2.h | 24 +
> include/configs/efikamx.h | 1 -
> include/configs/enbw_cmc.h | 12 +-
> include/configs/ethernut5.h | 1 -
> include/configs/flea3.h | 1 -
> include/configs/hawkboard.h | 28 +-
> include/configs/km/km_arm.h | 2 +-
> include/configs/m28evk.h | 1 -
> include/configs/mcx.h | 378 +++++++++++
> include/configs/mt_ventoux.h | 58 ++
> include/configs/mx6qarm2.h | 2 +
> include/configs/mx6qsabrelite.h | 15 +-
> include/configs/omap3_beagle.h | 8 +
> include/configs/omap3_evm_common.h | 1 -
> include/configs/omap3_mvblx.h | 1 -
> include/configs/omap4_panda.h | 26 +-
> include/configs/origen.h | 2 -
> include/configs/p1_p2_rdb_pc.h | 7 +-
> include/configs/paz00.h | 51 ++
> include/configs/s5pc210_universal.h | 1 +
> include/configs/smdk2410.h | 3 +-
> include/configs/smdk5250.h | 204 ++++++
> include/configs/tam3517-common.h | 7 +-
> include/configs/trats.h | 217 +++++++
> include/configs/tricorder.h | 320 ++++++++++
> include/configs/tt01.h | 12 +
> include/mc13783.h | 80 +++
> include/menu.h | 4 +
> include/usb/ulpi.h | 36 +-
> nand_spl/board/davinci/da8xxevm/Makefile | 155 -----
> tools/Makefile | 6 +
> tools/imximage.c | 8 +-
> tools/imximage.h | 2 +
> tools/mkexynosspl.c | 122 ++++
> 202 files changed, 11361 insertions(+), 937 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/kirkwood/cache.c
> create mode 100644 arch/arm/cpu/armv7/s5p-common/wdt.c
> create mode 100644 arch/arm/include/asm/arch-exynos/dmc.h
> create mode 100644 arch/arm/include/asm/arch-exynos/power.h
> create mode 100644 arch/arm/include/asm/arch-exynos/tzpc.h
> create mode 100644 arch/arm/include/asm/arch-exynos/watchdog.h
> rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%)
> create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
> create mode 100644 arch/arm/include/asm/arch-s5pc1xx/watchdog.h
> create mode 100644 arch/arm/include/asm/ehci-omap.h
> create mode 100644 board/compal/paz00/Makefile
> create mode 100644 board/compal/paz00/paz00.c
> create mode 100644 board/corscience/tricorder/Makefile
> create mode 100644 board/corscience/tricorder/tricorder.c
> create mode 100644 board/corscience/tricorder/tricorder.h
> create mode 100644 board/d-link/dns325/Makefile
> create mode 100644 board/d-link/dns325/dns325.c
> create mode 100644 board/d-link/dns325/dns325.h
> create mode 100644 board/d-link/dns325/kwbimage.cfg
> delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
> rename board/davinci/da8xxevm/{u-boot-spl.lds =>
> u-boot-spl-da850evm.lds} (100%)
> rename nand_spl/board/davinci/da8xxevm/u-boot.lds =>
> board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
> create mode 100644 board/htkw/mcx/Makefile
> create mode 100644 board/htkw/mcx/mcx.c
> create mode 100644 board/htkw/mcx/mcx.h
> create mode 100644 board/omicron/calimain/Makefile
> create mode 100644 board/omicron/calimain/calimain.c
> create mode 100644 board/samsung/smdk5250/Makefile
> create mode 100644 board/samsung/smdk5250/clock_init.c
> create mode 100644 board/samsung/smdk5250/dmc_init.c
> create mode 100644 board/samsung/smdk5250/lowlevel_init.S
> create mode 100644 board/samsung/smdk5250/mmc_boot.c
> create mode 100644 board/samsung/smdk5250/setup.h
> create mode 100644 board/samsung/smdk5250/smdk5250.c
> create mode 100644 board/samsung/smdk5250/tzpc_init.c
> create mode 100644 board/samsung/trats/Makefile
> create mode 100644 board/samsung/trats/setup.h
> create mode 100644 board/samsung/trats/trats.c
> create mode 100644 board/teejet/mt_ventoux/Makefile
> create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
> create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
> create mode 100644 doc/README.omap-ulpi-viewport
> rename drivers/usb/host/{ehci-kirkwood.c => ehci-marvell.c} (73%)
> create mode 100644 drivers/usb/host/ehci-omap.c
> create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
> create mode 100644 include/configs/calimain.h
> create mode 100644 include/configs/dns325.h
> create mode 100644 include/configs/mcx.h
> create mode 100644 include/configs/mt_ventoux.h
> create mode 100644 include/configs/paz00.h
> create mode 100644 include/configs/smdk5250.h
> create mode 100644 include/configs/trats.h
> create mode 100644 include/configs/tricorder.h
> create mode 100644 include/mc13783.h
> delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
> create mode 100644 tools/mkexynosspl.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Free markets select for winning solutions." - Eric S. Raymond
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-02-12 9:16 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 9cbfee6dc200cc746394c7efc10253a24f3ce108:
fw_env.h: fix comment (2012-02-11 22:18:38 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert ARIBAUD (5):
edminiv2: add hush parser, cmdline editing and long help
Rename ehci-kirkwood as ehci-marvell
Remove kirkwood-specifics from marvell EHCI driver
orion5x: add USB host ehci-marvell support
edminiv2: add USB host support
Amit Virdi (1):
ARM: Convert spear3xx and spear6xx boards to boards.cfg
Aneesh V (1):
OMAP4460: Reduce MPU clock speed from 920 to 700
Ben Gardiner (1):
arm, davinci: add PLL0 prediv to da850 lowlevel setup
Chander Kashyap (8):
Exynos: PWM: Add TCMPB3 field in pwm structure
Exynos: Fix ARM Clock frequency calculation
Origen: Select SCLKMPLL as FIMD0 parent clock
Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
ARM: EXYNOS: Add support for Exynos5 based SoCs
EXYNOS: Add SMDK5250 board support
EXYNOS: SMDK5250: Add MMC SPL support
SMDK5250: Add ethernet support
Christian Riesch (5):
arm, davinci: Add lowlevel_init for SoCs other than DM644X
arm, arm926ejs: Do cpu critical inits only for boards that require it
arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is
not defined
arm, davinci: Add support for the Calimain board from OMICRON
electronics
David M?ller (ELSOFT AG) (1):
ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
Dechesne, Nicolas (1):
OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()
Dirk Behme (4):
imximage: Add MX53 to the documentation
imximage: Add support for i.MX6
imximage: Sort bootops alphabetically
i.mx6q: configs: Add fdt_high and initrd_high variables
Fabio Estevam (3):
sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
configs: Remove CONFIG_NET_MULTI from board files
mx28: Show CPU frequency
Govindraj.R (6):
usb: ulpi: Extend the existing ulpi framework.
usb: ulpi: Add omap-ulpi-view port support
ehci-omap: Clean up added ehci-omap.c
OMAP3+: Clock: Adding ehci clock enabling
OMAP4: clock-common: Move the usb dppl configuration to new func
OMAP4: ehci-omap: enable ehci-omap for panda boards
Hadli, Manjunath (2):
davinci: remove macro CONFIG_DISPLAY_CPUINFO
davinci: add support for printing clock frequency
Heiko Schocher (7):
arm, davinci: add workaround for not resetting DMA bus and VPSS
modules
arm, davinci: add timer defines for tcr field
common: add possibility for readline_into_buffer timeout
common, menu: add statusline support
common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
common, menu: do not trigger timeout again, if a line is read
arm, davinci: cam_enc_4xx board updates
Helmut Raiger (3):
mmc: access mxcmmc from mx31 boards
mc13783.h: create and add regulator mode 0 and 1
tt01: add MMC support
HeungJun, Kim (3):
ARMV7: Exynos4: Add watchdog.h for Exynos4
ARMV7: Exynos4: Add supoort power for Exynos4
ARMV7: Exynos4: Add support for TRATS board
Holger Brunck (2):
arm/km: speed up i2c access for keymile boards
arm/km: checkpatch cleanup
Ian Campbell (1):
kirkwood_spi: correct access to irq_mask register
Ilya Yanok (2):
ehci-omap: driver for EHCI host on OMAP3
mcx: support for HTKW mcx board
Jason Liu (2):
i.mx6q: mx6qsabrelite: Add the ethernet function support
i.mx: i.mx5: update imx_get_mac_from_fuse function
Matthias Fuchs (1):
mx28: fix i.MX28 spi driver
Michael Walle (1):
arm, arm-kirkwood: disable l2c before linux boot
Minkyu Kang (4):
ORIGEN: remove duplicated MACH_TYPE define
S5P: support generic watchdog timer
TRATS: use the generic watchdog timer
TRATS: set gpio of UART correctly
Pali Roh?r (1):
arm: omap3: Define save_boot_params in lowlevel_init.S for SPL only
Peter Barada (2):
omap3logic: Add missing GPMC pinmux for LAN92xx access
ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
Peter Meerwald (3):
beagle: fix typos
omap3: fix comment typos
doc: fix typos
Prafulla Wadaskar (1):
bugfix: all Marvell specific build fails due to undefined
reference to `get_ticks'
Schuyler Patton (1):
AM3517: Changed default clock rate for AM3517
Simon Glass (9):
tegra: Adjust funcmux config test to permit expansion
tegra: Add enum to select from available funcmux configs
tegra: Add I2C support to funcmux
tegra: Add SDMMC support to funcmux
tegra: Use funcmux for MMC on tamonten
tegra: Use funcmux for MMC on harmony
tegra: Use funcmux for MMC on seaboard
tegra: mmc: Support operation with dcache enabled
tegra2: Enable data cache
Stefan (1):
kirkwood: add support for D-Link DNS-325
Stefano Babic (3):
imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
OMAP3: TAM3517: update ehci interface
ARM: omap3: Added Teejet mt_ventoux
Stephen Warren (3):
tegra2: Fix conflicting pinmux for UARTA
tegra2: Fix default RAM size selection in odmdata
tegra2: Add support for Compal Paz00 (Toshiba AC100)
Sughosh Ganu (2):
arm, arm926ejs: Flush the data cache before disabling it
Changes to move hawkboard to the new spl infrastructure
Thomas Weber (1):
OMAP3: Add Corscience Tricorder board
Tom Rini (1):
OMAP3: Correct get_sdr_cs_offset mask
Troy Kisky (2):
i.mx6: mx6x_pins: Fix uart txd definitions
i.mx6q: mx6qsabrelite: Setup uart1 pinmux
Yegor Yefremov (1):
am3517evm: remove rootfstype kernel parameter for MMC boot device
robertcnelson at gmail.com (1):
Beagleboard: Correct memory size on rev C4
MAINTAINERS | 21 +
Makefile | 9 +-
README | 6 +
arch/arm/cpu/arm1136/mx31/generic.c | 1 +
arch/arm/cpu/arm926ejs/armada100/timer.c | 18 +
arch/arm/cpu/arm926ejs/cache.c | 9 +
arch/arm/cpu/arm926ejs/cpu.c | 2 +
arch/arm/cpu/arm926ejs/davinci/cpu.c | 76 +--
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 31 +-
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 52 ++-
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 4 +
arch/arm/cpu/arm926ejs/davinci/spl.c | 4 +-
arch/arm/cpu/arm926ejs/kirkwood/Makefile | 1 +
arch/arm/cpu/arm926ejs/kirkwood/cache.c | 34 +
arch/arm/cpu/arm926ejs/kirkwood/timer.c | 18 +
arch/arm/cpu/arm926ejs/mx27/generic.c | 35 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 3 +-
arch/arm/cpu/arm926ejs/orion5x/timer.c | 18 +
arch/arm/cpu/arm926ejs/pantheon/timer.c | 18 +
arch/arm/cpu/arm926ejs/start.S | 28 +-
arch/arm/cpu/armv7/exynos/clock.c | 229 +++++++-
arch/arm/cpu/armv7/mx5/soc.c | 2 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 54 +-
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 2 +
arch/arm/cpu/armv7/omap3/board.c | 8 +-
arch/arm/cpu/armv7/omap3/clock.c | 20 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 4 +-
arch/arm/cpu/armv7/omap3/sdrc.c | 2 +-
arch/arm/cpu/armv7/omap4/clocks.c | 27 +-
arch/arm/cpu/armv7/s5p-common/Makefile | 1 +
arch/arm/cpu/armv7/s5p-common/wdt.c | 59 ++
arch/arm/cpu/armv7/tegra2/board.c | 12 +-
arch/arm/cpu/armv7/tegra2/funcmux.c | 152 ++++-
arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 9 +
arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 1 -
arch/arm/include/asm/arch-davinci/hardware.h | 9 +
arch/arm/include/asm/arch-davinci/pll_defs.h | 3 +-
arch/arm/include/asm/arch-davinci/timer_defs.h | 16 +
arch/arm/include/asm/arch-exynos/clock.h | 326 ++++++++++
arch/arm/include/asm/arch-exynos/cpu.h | 36 +-
arch/arm/include/asm/arch-exynos/dmc.h | 146 +++++
arch/arm/include/asm/arch-exynos/gpio.h | 99 +++-
arch/arm/include/asm/arch-exynos/power.h | 230 +++++++
arch/arm/include/asm/arch-exynos/pwm.h | 2 +-
arch/arm/include/asm/arch-exynos/tzpc.h | 52 ++
arch/arm/include/asm/arch-exynos/watchdog.h | 57 ++
arch/arm/include/asm/arch-kirkwood/config.h | 2 +-
arch/arm/include/asm/arch-kirkwood/kirkwood.h | 12 +
arch/arm/include/asm/arch-mx27/clock.h | 22 +-
arch/arm/include/asm/arch-mx31/clock.h | 3 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 11 +
arch/arm/include/asm/arch-mx31/sys_proto.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 36 +-
arch/arm/include/asm/arch-omap3/clocks_omap3.h | 2 +-
.../asm/arch-omap3/{ehci_omap3.h => ehci.h} | 45 +-
arch/arm/include/asm/arch-omap3/mem.h | 57 +-
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/ehci.h | 49 ++
arch/arm/include/asm/arch-orion5x/orion5x.h | 12 +
arch/arm/include/asm/arch-s5pc1xx/cpu.h | 1 +
arch/arm/include/asm/arch-s5pc1xx/watchdog.h | 58 ++
arch/arm/include/asm/arch-tegra2/funcmux.h | 30 +-
arch/arm/include/asm/ehci-omap.h | 142 +++++
arch/arm/include/asm/u-boot.h | 3 +
arch/arm/lib/board.c | 10 +-
board/ait/cam_enc_4xx/cam_enc_4xx.c | 667
+++++++++++++++++++-
board/ait/cam_enc_4xx/ublimage.cfg | 3 +-
board/avionic-design/common/tamonten.c | 10 +-
board/compal/paz00/Makefile | 41 ++
board/compal/paz00/paz00.c | 81 +++
board/corscience/tricorder/Makefile | 46 ++
board/corscience/tricorder/tricorder.c | 105 +++
board/corscience/tricorder/tricorder.h | 375 +++++++++++
board/d-link/dns325/Makefile | 49 ++
board/d-link/dns325/dns325.c | 148 +++++
board/d-link/dns325/dns325.h | 48 ++
board/d-link/dns325/kwbimage.cfg | 208 ++++++
board/davinci/da8xxevm/da850evm.c | 4 +-
board/davinci/da8xxevm/hawkboard.c | 23 +
board/davinci/da8xxevm/hawkboard_nand_spl.c | 115 ----
.../{u-boot-spl.lds => u-boot-spl-da850evm.lds} | 0
.../davinci/da8xxevm/u-boot-spl-hawk.lds | 22 +-
board/efikamx/efikamx-usb.c | 24 +-
board/enbw/enbw_cmc/enbw_cmc.c | 13 +-
board/freescale/common/Makefile | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 9 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 114 ++++
board/hale/tt01/tt01.c | 34 +-
board/htkw/mcx/Makefile | 38 ++
board/htkw/mcx/mcx.c | 112 ++++
board/htkw/mcx/mcx.h | 408 ++++++++++++
board/keymile/km_arm/km_arm.c | 23 +-
board/logicpd/omap3som/omap3logic.c | 15 +
board/nvidia/harmony/harmony.c | 19 +-
board/nvidia/seaboard/seaboard.c | 21 +-
board/omicron/calimain/Makefile | 45 ++
board/omicron/calimain/calimain.c | 188 ++++++
board/samsung/origen/lowlevel_init.S | 5 +
board/samsung/origen/origen_setup.h | 12 +
board/samsung/smdk5250/Makefile | 58 ++
board/samsung/smdk5250/clock_init.c | 202 ++++++
board/samsung/smdk5250/dmc_init.c | 462 ++++++++++++++
board/samsung/smdk5250/lowlevel_init.S | 96 +++
board/samsung/smdk5250/mmc_boot.c | 58 ++
board/samsung/smdk5250/setup.h | 451 +++++++++++++
board/samsung/smdk5250/smdk5250.c | 240 +++++++
board/samsung/smdk5250/tzpc_init.c | 48 ++
board/samsung/trats/Makefile | 43 ++
board/samsung/trats/setup.h | 637
+++++++++++++++++++
board/samsung/trats/trats.c | 366 +++++++++++
board/technexion/twister/twister.c | 22 +
board/teejet/mt_ventoux/Makefile | 38 ++
board/teejet/mt_ventoux/mt_ventoux.c | 233 +++++++
board/teejet/mt_ventoux/mt_ventoux.h | 429 +++++++++++++
board/ti/beagle/beagle.c | 116 +---
board/ti/beagle/beagle.h | 4 +-
board/ti/panda/panda.c | 38 ++
board/ti/panda/panda_mux_data.h | 16 +-
boards.cfg | 13 +-
common/cmd_bdinfo.c | 9 +
common/cmd_nvedit.c | 2 +-
common/main.c | 24 +-
common/menu.c | 15 +-
doc/README.SPL | 4 +-
doc/README.hawkboard | 43 +-
doc/README.imximage | 13 +-
doc/README.menu | 10 +
doc/README.omap-ulpi-viewport | 27 +
drivers/mmc/mxcmmc.c | 8 +-
drivers/mmc/tegra2_mmc.c | 16 +
drivers/spi/kirkwood_spi.c | 2 +-
drivers/spi/mxs_spi.c | 12 +-
drivers/usb/host/Makefile | 3 +-
.../usb/host/{ehci-kirkwood.c => ehci-marvell.c} | 36 +-
drivers/usb/host/ehci-omap.c | 255 ++++++++
drivers/usb/ulpi/Makefile | 1 +
drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++
drivers/usb/ulpi/ulpi-viewport.c | 32 +-
drivers/usb/ulpi/ulpi.c | 54 +-
include/common.h | 4 +-
include/configs/MPC8536DS.h | 1 +
include/configs/P1010RDB.h | 5 +-
include/configs/P1_P2_RDB.h | 1 +
include/configs/P2020COME.h | 1 +
include/configs/P2020DS.h | 1 +
include/configs/P2041RDB.h | 1 +
include/configs/PM826.h | 2 -
include/configs/PM828.h | 2 -
include/configs/VCMA9.h | 3 +-
include/configs/am3517_evm.h | 3 +-
include/configs/calimain.h | 363 +++++++++++
include/configs/cam_enc_4xx.h | 143 ++++-
include/configs/coreboot.h | 6 -
include/configs/corenet_ds.h | 1 +
include/configs/da830evm.h | 4 +
include/configs/da850evm.h | 11 +-
include/configs/davinci_dm355evm.h | 5 +-
include/configs/davinci_dm355leopard.h | 5 +-
include/configs/davinci_dm365evm.h | 4 +
include/configs/davinci_dm6467Tevm.h | 5 +-
include/configs/davinci_dm6467evm.h | 5 +-
include/configs/davinci_dvevm.h | 6 +-
include/configs/davinci_schmoogie.h | 5 +-
include/configs/davinci_sffsdr.h | 5 +-
include/configs/davinci_sonata.h | 5 +-
include/configs/dns325.h | 188 ++++++
include/configs/ea20.h | 4 +
include/configs/ecovec.h | 1 -
include/configs/edminiv2.h | 24 +
include/configs/efikamx.h | 1 -
include/configs/enbw_cmc.h | 12 +-
include/configs/ethernut5.h | 1 -
include/configs/flea3.h | 1 -
include/configs/hawkboard.h | 28 +-
include/configs/km/km_arm.h | 2 +-
include/configs/m28evk.h | 1 -
include/configs/mcx.h | 378 +++++++++++
include/configs/mt_ventoux.h | 58 ++
include/configs/mx6qarm2.h | 2 +
include/configs/mx6qsabrelite.h | 15 +-
include/configs/omap3_beagle.h | 8 +
include/configs/omap3_evm_common.h | 1 -
include/configs/omap3_mvblx.h | 1 -
include/configs/omap4_panda.h | 26 +-
include/configs/origen.h | 2 -
include/configs/p1_p2_rdb_pc.h | 7 +-
include/configs/paz00.h | 51 ++
include/configs/s5pc210_universal.h | 1 +
include/configs/smdk2410.h | 3 +-
include/configs/smdk5250.h | 204 ++++++
include/configs/tam3517-common.h | 7 +-
include/configs/trats.h | 217 +++++++
include/configs/tricorder.h | 320 ++++++++++
include/configs/tt01.h | 12 +
include/mc13783.h | 80 +++
include/menu.h | 4 +
include/usb/ulpi.h | 36 +-
nand_spl/board/davinci/da8xxevm/Makefile | 155 -----
tools/Makefile | 6 +
tools/imximage.c | 8 +-
tools/imximage.h | 2 +
tools/mkexynosspl.c | 122 ++++
202 files changed, 11361 insertions(+), 937 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/kirkwood/cache.c
create mode 100644 arch/arm/cpu/armv7/s5p-common/wdt.c
create mode 100644 arch/arm/include/asm/arch-exynos/dmc.h
create mode 100644 arch/arm/include/asm/arch-exynos/power.h
create mode 100644 arch/arm/include/asm/arch-exynos/tzpc.h
create mode 100644 arch/arm/include/asm/arch-exynos/watchdog.h
rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%)
create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
create mode 100644 arch/arm/include/asm/arch-s5pc1xx/watchdog.h
create mode 100644 arch/arm/include/asm/ehci-omap.h
create mode 100644 board/compal/paz00/Makefile
create mode 100644 board/compal/paz00/paz00.c
create mode 100644 board/corscience/tricorder/Makefile
create mode 100644 board/corscience/tricorder/tricorder.c
create mode 100644 board/corscience/tricorder/tricorder.h
create mode 100644 board/d-link/dns325/Makefile
create mode 100644 board/d-link/dns325/dns325.c
create mode 100644 board/d-link/dns325/dns325.h
create mode 100644 board/d-link/dns325/kwbimage.cfg
delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
rename board/davinci/da8xxevm/{u-boot-spl.lds =>
u-boot-spl-da850evm.lds} (100%)
rename nand_spl/board/davinci/da8xxevm/u-boot.lds =>
board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
create mode 100644 board/htkw/mcx/Makefile
create mode 100644 board/htkw/mcx/mcx.c
create mode 100644 board/htkw/mcx/mcx.h
create mode 100644 board/omicron/calimain/Makefile
create mode 100644 board/omicron/calimain/calimain.c
create mode 100644 board/samsung/smdk5250/Makefile
create mode 100644 board/samsung/smdk5250/clock_init.c
create mode 100644 board/samsung/smdk5250/dmc_init.c
create mode 100644 board/samsung/smdk5250/lowlevel_init.S
create mode 100644 board/samsung/smdk5250/mmc_boot.c
create mode 100644 board/samsung/smdk5250/setup.h
create mode 100644 board/samsung/smdk5250/smdk5250.c
create mode 100644 board/samsung/smdk5250/tzpc_init.c
create mode 100644 board/samsung/trats/Makefile
create mode 100644 board/samsung/trats/setup.h
create mode 100644 board/samsung/trats/trats.c
create mode 100644 board/teejet/mt_ventoux/Makefile
create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
create mode 100644 doc/README.omap-ulpi-viewport
rename drivers/usb/host/{ehci-kirkwood.c => ehci-marvell.c} (73%)
create mode 100644 drivers/usb/host/ehci-omap.c
create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
create mode 100644 include/configs/calimain.h
create mode 100644 include/configs/dns325.h
create mode 100644 include/configs/mcx.h
create mode 100644 include/configs/mt_ventoux.h
create mode 100644 include/configs/paz00.h
create mode 100644 include/configs/smdk5250.h
create mode 100644 include/configs/trats.h
create mode 100644 include/configs/tricorder.h
create mode 100644 include/mc13783.h
delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
create mode 100644 tools/mkexynosspl.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2012-01-16 8:16 Albert ARIBAUD
@ 2012-01-17 21:36 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-01-17 21:36 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4F13DCEF.1070209@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit f1f441afc41083e54775e6efe21b2c059e80b8f7:
>
> openrisc: Add MAINTAINERS entry (2012-01-13 21:17:08 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Andreas M?ller (7):
> drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
> board/overo/overo.c: replace printf with one argument by puts
> include/configs/omap3_overo.h: several cleanups
> drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
> OMAP SPL: call timer_init in s_init to make udelay work earlier
> omap_rev_string: output to stdout
> overo: add SPL support
>
> Aneesh V (1):
> omap4: fix boot issue on ES2.0 Panda
>
> Chandan Nath (5):
> ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
> ARM:AM33XX: Fix ddr and timer register offset
> ARM:AM33XX: Fixing AM335X config parameters
> ARM:AM33XX: Add mmc/sd support
> ARM:AM33XX: Add SPL support for AM335X EVM
>
> Christian Riesch (3):
> arm, davinci: Use a common configuration file for da850evm and
> da850_am18xxevm
> da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines
> arm, davinci: Change byte order of RTC kick register values
>
> Eric Nelson (1):
> i.mx6q: mx6qarm2: Enable the usboh3 clock
>
> Fabio Estevam (7):
> net: imx: Add multi-FEC support for imx_get_mac_from_fuse
> mx28: Let imx_get_mac_from_fuse be common for mx28
> mx28: Let dram_init be common for mx28
> mx28evk: Add initial support for MX28EVK board
> mx28evk: Remove 'all' target from Makefile
> m28evk: Use GENERATED_GBL_DATA_SIZE
> m28evk: Remove 'all' target from Makefile
>
> Jason Liu (6):
> i.mx: i.mx6q: Add the enet clock function
> fec: add the i.mx6q enet driver support
> i.mx6q: arm2: Add the enet function support
> i.mx6:imx6q: allign MAC address with burned-in ordering
> imx: mx6q: add aipstz init for off platform periph
> i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
>
> Marek Vasut (2):
> MX28: Fix MXSBOOT segfault if no params specified
> M28EVK: Fix build if CONFIG_CMD_NAND not selected
>
> Nikita Kiryanov (6):
> cm-t35: cleanup the config file
> cm-t35: various cleanups
> cm-t35: add EEPROM module and pass Linux a serial number
> omap3: make get_board_rev() function weak
> cm-t35: pass correct revision information to Linux
> cm-t35: use the new EEPROM module to read the MAC address
>
> Peter Barada (1):
> ARMV7: Add support For Logic OMAP35x/DM37x modules
>
> Peter Meerwald (1):
> beagle: add eeprom expansion board info for bct brettl3
>
> Thomas Weber (1):
> OMAP3: Remove unused define CONFIG_OMAP3_*_DDR
>
> Veli-Pekka Peltola (1):
> mx28: remove omap specific config options
>
> Zach Sadecki (1):
> mx28: fix clearing of IRQs in power init
>
> MAINTAINERS | 6 +
> Makefile | 2 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 67 ++++
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
> arch/arm/cpu/arm926ejs/mx28/start.S | 6 -
> arch/arm/cpu/armv7/am33xx/Makefile | 2 -
> arch/arm/cpu/armv7/am33xx/board.c | 66 ++++-
> arch/arm/cpu/armv7/am33xx/clock.c | 8 +
> arch/arm/cpu/armv7/am33xx/config.mk | 18 +
> arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
> arch/arm/cpu/armv7/am33xx/lowlevel_init.S | 72 ----
> arch/arm/cpu/armv7/mx6/clock.c | 5 +
> arch/arm/cpu/armv7/mx6/soc.c | 45 ++-
> arch/arm/cpu/armv7/omap-common/Makefile | 4 +
> arch/arm/cpu/armv7/omap-common/boot-common.c | 49 +++
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 38 +--
> arch/arm/cpu/armv7/omap-common/spl.c | 14 +-
> arch/arm/cpu/armv7/omap3/board.c | 2 +
> arch/arm/cpu/armv7/omap3/sys_info.c | 3 +-
> arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
> .../arm/include/asm/arch-am33xx}/common_def.h | 4 +-
> arch/arm/include/asm/arch-am33xx/cpu.h | 44 ++--
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 6 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 164 +++++++++
> arch/arm/include/asm/arch-am33xx/omap.h | 59 ++++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
> arch/arm/include/asm/arch-davinci/hardware.h | 4 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 15 +-
> arch/arm/include/asm/arch-omap3/mem.h | 26 ++
> arch/arm/include/asm/arch-omap4/omap.h | 2 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +-
> arch/arm/include/asm/omap_common.h | 7 +-
> board/cm_t35/Makefile | 4 +-
> board/cm_t35/cm_t35.c | 27 +-
> board/cm_t35/eeprom.c | 124 +++++++
> board/cm_t35/eeprom.h | 33 ++
> board/denx/m28evk/Makefile | 2 -
> board/denx/m28evk/m28evk.c | 53 +---
> board/enbw/enbw_cmc/enbw_cmc.c | 4 +-
> board/freescale/mx28evk/Makefile | 47 +++
> board/freescale/mx28evk/iomux.c | 138 ++++++++
> board/freescale/mx28evk/mx28evk.c | 169 +++++++++
> board/freescale/mx28evk/u-boot.bd | 14 +
> board/freescale/mx6qarm2/imximage.cfg | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 90 +++++
> board/freescale/mx6qsabrelite/Makefile | 42 +++
> board/freescale/mx6qsabrelite/imximage.cfg | 170 +++++++++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 151 ++++++++
> .../{overo/config.mk => logicpd/omap3som/Makefile} | 28 ++-
> board/logicpd/omap3som/omap3logic.c | 247 +++++++++++++
> board/logicpd/omap3som/omap3logic.h | 47 +++
> board/overo/overo.c | 79 ++++-
> board/overo/overo.h | 5 +
> board/ti/am335x/evm.c | 2 +-
> board/ti/am335x/mux.c | 23 ++-
> board/ti/beagle/beagle.c | 4 +
> boards.cfg | 5 +-
> doc/README.mx6qsabrelite | 67 ++++
> drivers/i2c/omap24xx_i2c.c | 25 +-
> drivers/net/fec_mxc.c | 19 +-
> drivers/net/fec_mxc.h | 9 +-
> include/configs/am335x_evm.h | 62 +++-
> include/configs/cm_t35.h | 82 +++---
> include/configs/da850_am18xxevm.h | 246 -------------
> include/configs/da850evm.h | 3 -
> include/configs/dig297.h | 3 -
> include/configs/igep0020.h | 3 -
> include/configs/igep0030.h | 3 -
> include/configs/m28evk.h | 13 +-
> include/configs/mx28evk.h | 176 ++++++++++
> include/configs/mx6qarm2.h | 12 +-
> include/configs/mx6qsabrelite.h | 162 +++++++++
> include/configs/omap3_logic.h | 362
> ++++++++++++++++++++
> include/configs/omap3_mvblx.h | 3 -
> include/configs/omap3_overo.h | 121 +++++--
> include/configs/omap3_pandora.h | 3 -
> include/configs/omap3_sdp3430.h | 3 -
> include/configs/omap3_zoom1.h | 3 -
> include/configs/omap3_zoom2.h | 3 -
> spl/Makefile | 13 +-
> tools/mxsboot.c | 3 +
> 86 files changed, 3006 insertions(+), 668 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/am33xx/config.mk
> delete mode 100644 arch/arm/cpu/armv7/am33xx/lowlevel_init.S
> create mode 100644 arch/arm/cpu/armv7/omap-common/boot-common.c
> rename {board/ti/am335x =>
> arch/arm/include/asm/arch-am33xx}/common_def.h (81%)
> create mode 100644 arch/arm/include/asm/arch-am33xx/mmc_host_def.h
> create mode 100644 arch/arm/include/asm/arch-am33xx/omap.h
> create mode 100644 board/cm_t35/eeprom.c
> create mode 100644 board/cm_t35/eeprom.h
> create mode 100644 board/freescale/mx28evk/Makefile
> create mode 100644 board/freescale/mx28evk/iomux.c
> create mode 100644 board/freescale/mx28evk/mx28evk.c
> create mode 100644 board/freescale/mx28evk/u-boot.bd
> create mode 100644 board/freescale/mx6qsabrelite/Makefile
> create mode 100644 board/freescale/mx6qsabrelite/imximage.cfg
> create mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
> rename board/{overo/config.mk => logicpd/omap3som/Makefile} (61%)
> create mode 100644 board/logicpd/omap3som/omap3logic.c
> create mode 100644 board/logicpd/omap3som/omap3logic.h
> create mode 100644 doc/README.mx6qsabrelite
> delete mode 100644 include/configs/da850_am18xxevm.h
> create mode 100644 include/configs/mx28evk.h
> create mode 100644 include/configs/mx6qsabrelite.h
> create mode 100644 include/configs/omap3_logic.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Many aligators will be slain, but the swamp will remain.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2012-01-16 8:16 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit f1f441afc41083e54775e6efe21b2c059e80b8f7:
openrisc: Add MAINTAINERS entry (2012-01-13 21:17:08 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Andreas M?ller (7):
drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
board/overo/overo.c: replace printf with one argument by puts
include/configs/omap3_overo.h: several cleanups
drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
OMAP SPL: call timer_init in s_init to make udelay work earlier
omap_rev_string: output to stdout
overo: add SPL support
Aneesh V (1):
omap4: fix boot issue on ES2.0 Panda
Chandan Nath (5):
ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
ARM:AM33XX: Fix ddr and timer register offset
ARM:AM33XX: Fixing AM335X config parameters
ARM:AM33XX: Add mmc/sd support
ARM:AM33XX: Add SPL support for AM335X EVM
Christian Riesch (3):
arm, davinci: Use a common configuration file for da850evm and
da850_am18xxevm
da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines
arm, davinci: Change byte order of RTC kick register values
Eric Nelson (1):
i.mx6q: mx6qarm2: Enable the usboh3 clock
Fabio Estevam (7):
net: imx: Add multi-FEC support for imx_get_mac_from_fuse
mx28: Let imx_get_mac_from_fuse be common for mx28
mx28: Let dram_init be common for mx28
mx28evk: Add initial support for MX28EVK board
mx28evk: Remove 'all' target from Makefile
m28evk: Use GENERATED_GBL_DATA_SIZE
m28evk: Remove 'all' target from Makefile
Jason Liu (6):
i.mx: i.mx6q: Add the enet clock function
fec: add the i.mx6q enet driver support
i.mx6q: arm2: Add the enet function support
i.mx6:imx6q: allign MAC address with burned-in ordering
imx: mx6q: add aipstz init for off platform periph
i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Marek Vasut (2):
MX28: Fix MXSBOOT segfault if no params specified
M28EVK: Fix build if CONFIG_CMD_NAND not selected
Nikita Kiryanov (6):
cm-t35: cleanup the config file
cm-t35: various cleanups
cm-t35: add EEPROM module and pass Linux a serial number
omap3: make get_board_rev() function weak
cm-t35: pass correct revision information to Linux
cm-t35: use the new EEPROM module to read the MAC address
Peter Barada (1):
ARMV7: Add support For Logic OMAP35x/DM37x modules
Peter Meerwald (1):
beagle: add eeprom expansion board info for bct brettl3
Thomas Weber (1):
OMAP3: Remove unused define CONFIG_OMAP3_*_DDR
Veli-Pekka Peltola (1):
mx28: remove omap specific config options
Zach Sadecki (1):
mx28: fix clearing of IRQs in power init
MAINTAINERS | 6 +
Makefile | 2 +-
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 67 ++++
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 8 +-
arch/arm/cpu/arm926ejs/mx28/start.S | 6 -
arch/arm/cpu/armv7/am33xx/Makefile | 2 -
arch/arm/cpu/armv7/am33xx/board.c | 66 ++++-
arch/arm/cpu/armv7/am33xx/clock.c | 8 +
arch/arm/cpu/armv7/am33xx/config.mk | 18 +
arch/arm/cpu/armv7/am33xx/emif4.c | 2 +-
arch/arm/cpu/armv7/am33xx/lowlevel_init.S | 72 ----
arch/arm/cpu/armv7/mx6/clock.c | 5 +
arch/arm/cpu/armv7/mx6/soc.c | 45 ++-
arch/arm/cpu/armv7/omap-common/Makefile | 4 +
arch/arm/cpu/armv7/omap-common/boot-common.c | 49 +++
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 38 +--
arch/arm/cpu/armv7/omap-common/spl.c | 14 +-
arch/arm/cpu/armv7/omap3/board.c | 2 +
arch/arm/cpu/armv7/omap3/sys_info.c | 3 +-
arch/arm/cpu/armv7/omap4/hwinit.c | 4 +-
.../arm/include/asm/arch-am33xx}/common_def.h | 4 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 44 ++--
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 6 +-
arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 164 +++++++++
arch/arm/include/asm/arch-am33xx/omap.h | 59 ++++
arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 +
arch/arm/include/asm/arch-davinci/hardware.h | 4 +-
arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 15 +-
arch/arm/include/asm/arch-omap3/mem.h | 26 ++
arch/arm/include/asm/arch-omap4/omap.h | 2 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +-
arch/arm/include/asm/omap_common.h | 7 +-
board/cm_t35/Makefile | 4 +-
board/cm_t35/cm_t35.c | 27 +-
board/cm_t35/eeprom.c | 124 +++++++
board/cm_t35/eeprom.h | 33 ++
board/denx/m28evk/Makefile | 2 -
board/denx/m28evk/m28evk.c | 53 +---
board/enbw/enbw_cmc/enbw_cmc.c | 4 +-
board/freescale/mx28evk/Makefile | 47 +++
board/freescale/mx28evk/iomux.c | 138 ++++++++
board/freescale/mx28evk/mx28evk.c | 169 +++++++++
board/freescale/mx28evk/u-boot.bd | 14 +
board/freescale/mx6qarm2/imximage.cfg | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 90 +++++
board/freescale/mx6qsabrelite/Makefile | 42 +++
board/freescale/mx6qsabrelite/imximage.cfg | 170 +++++++++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 151 ++++++++
.../{overo/config.mk => logicpd/omap3som/Makefile} | 28 ++-
board/logicpd/omap3som/omap3logic.c | 247 +++++++++++++
board/logicpd/omap3som/omap3logic.h | 47 +++
board/overo/overo.c | 79 ++++-
board/overo/overo.h | 5 +
board/ti/am335x/evm.c | 2 +-
board/ti/am335x/mux.c | 23 ++-
board/ti/beagle/beagle.c | 4 +
boards.cfg | 5 +-
doc/README.mx6qsabrelite | 67 ++++
drivers/i2c/omap24xx_i2c.c | 25 +-
drivers/net/fec_mxc.c | 19 +-
drivers/net/fec_mxc.h | 9 +-
include/configs/am335x_evm.h | 62 +++-
include/configs/cm_t35.h | 82 +++---
include/configs/da850_am18xxevm.h | 246 -------------
include/configs/da850evm.h | 3 -
include/configs/dig297.h | 3 -
include/configs/igep0020.h | 3 -
include/configs/igep0030.h | 3 -
include/configs/m28evk.h | 13 +-
include/configs/mx28evk.h | 176 ++++++++++
include/configs/mx6qarm2.h | 12 +-
include/configs/mx6qsabrelite.h | 162 +++++++++
include/configs/omap3_logic.h | 362
++++++++++++++++++++
include/configs/omap3_mvblx.h | 3 -
include/configs/omap3_overo.h | 121 +++++--
include/configs/omap3_pandora.h | 3 -
include/configs/omap3_sdp3430.h | 3 -
include/configs/omap3_zoom1.h | 3 -
include/configs/omap3_zoom2.h | 3 -
spl/Makefile | 13 +-
tools/mxsboot.c | 3 +
86 files changed, 3006 insertions(+), 668 deletions(-)
create mode 100644 arch/arm/cpu/armv7/am33xx/config.mk
delete mode 100644 arch/arm/cpu/armv7/am33xx/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/omap-common/boot-common.c
rename {board/ti/am335x =>
arch/arm/include/asm/arch-am33xx}/common_def.h (81%)
create mode 100644 arch/arm/include/asm/arch-am33xx/mmc_host_def.h
create mode 100644 arch/arm/include/asm/arch-am33xx/omap.h
create mode 100644 board/cm_t35/eeprom.c
create mode 100644 board/cm_t35/eeprom.h
create mode 100644 board/freescale/mx28evk/Makefile
create mode 100644 board/freescale/mx28evk/iomux.c
create mode 100644 board/freescale/mx28evk/mx28evk.c
create mode 100644 board/freescale/mx28evk/u-boot.bd
create mode 100644 board/freescale/mx6qsabrelite/Makefile
create mode 100644 board/freescale/mx6qsabrelite/imximage.cfg
create mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
rename board/{overo/config.mk => logicpd/omap3som/Makefile} (61%)
create mode 100644 board/logicpd/omap3som/omap3logic.c
create mode 100644 board/logicpd/omap3som/omap3logic.h
create mode 100644 doc/README.mx6qsabrelite
delete mode 100644 include/configs/da850_am18xxevm.h
create mode 100644 include/configs/mx28evk.h
create mode 100644 include/configs/mx6qsabrelite.h
create mode 100644 include/configs/omap3_logic.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-12-24 9:27 Albert ARIBAUD
@ 2012-01-05 15:53 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2012-01-05 15:53 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EF59AE7.9030402@aribaud.net> you wrote:
> Hi Wolfgang,
>
> Following the opening of the merge window, the following changes since
> commit bfcc40bb09b05c90cc3b1496abb270eb8aa72134:
>
> Merge branch 'next' of ../next (2011-12-23 20:53:58 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Christian Riesch (7):
> spl: display_options.o is required for SPI flash support in SPL
> sf: Add spi_boot() to allow booting from SPI flash in an SPL
> arm, davinci: Add SPL support for DA850 SoCs
> arm, da850evm: Add an SPL for SPI boot
> mkimage: Fix variable length header support
> arm, davinci: Add support for generating AIS images to the Makefile
> arm, davinci: Fix build warnings for cam_enc_4xx
>
> Fabio Estevam (1):
> vision2: Fix checkpatch warning
>
> Simon Glass (14):
> tegra2: Tidy UART selection
> tegra2: Add UARTB support
> tegra2: config: Enable SPI flash on Seaboard
> tegra2: Enable SPI environment on Seaboard
> tegra2: Implement SPI / UART GPIO switch
> tegra2: spi: Support SPI / UART switch
> tegra2: Plumb in SPI/UART switch code
> tegra: Fix build error in plutux, medcom
> tegra: Move cpu_init_cp15() to arch_cpu_init()
> tegra: Move clock_early_init() to arch_cpu_init()
> tegra: add clock_ll_start_uart() to enable UART prior to reloc
> tegra: Add a function mux feature
> tegra: Add support for UART init in cpu board.c
> tegra: Move boards over to use arch-level board UART function
>
> Stefano Babic (2):
> ARM: omap3: added common configuration for Technexion TAM3517
> ARM: omap3: add support to Technexion twister board
>
> Thierry Reding (7):
> tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
> tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
> tegra2: Move tegra2_mmc_init() prototype to public header.
> tegra2: Add common Avionic Design Tamonten support.
> tegra2: Add Avionic Design Plutux support.
> tegra2: Add Avionic Design Medcom support.
> tegra2: Optimize out-of-tree build for Ventana.
>
> Thomas Weber (1):
> Devkit8000: Switch over to enable_gpmc_cs_config
>
> Tom Warren (2):
> tegra2: spi: Add SPI driver for Tegra2 SOC
> arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
>
> .gitignore | 1 +
> MAINTAINERS | 6 +
> Makefile | 13 +
> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/davinci/spl.c | 35 ++-
> arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
> arch/arm/cpu/armv7/tegra2/board.c | 58 +++
> arch/arm/cpu/armv7/tegra2/clock.c | 14 +
> arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> arch/arm/cpu/armv7/tegra2/funcmux.c | 58 +++
> arch/arm/include/asm/arch-tegra2/board.h | 30 ++
> arch/arm/include/asm/arch-tegra2/clock.h | 11 +
> arch/arm/include/asm/arch-tegra2/funcmux.h | 41 ++
> arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
> arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++
> arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 +++
> board/avionic-design/common/tamonten.c | 116 ++++++
> board/avionic-design/common/tamonten.h | 32 ++
> board/avionic-design/medcom/Makefile | 50 +++
> board/avionic-design/medcom/medcom.c | 45 +++
> board/avionic-design/plutux/Makefile | 50 +++
> board/avionic-design/plutux/plutux.c | 45 +++
> board/davinci/da8xxevm/da850evm.c | 4 +-
> board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++
> board/nvidia/common/Makefile | 47 +++
> board/nvidia/common/board.c | 73 +---
> board/nvidia/common/board.h | 2 +-
> board/nvidia/common/uart-spi-switch.c | 138 +++++++
> board/nvidia/harmony/Makefile | 1 -
> board/nvidia/harmony/harmony.c | 2 +-
> board/nvidia/seaboard/Makefile | 1 -
> board/nvidia/seaboard/seaboard.c | 5 +-
> board/nvidia/ventana/Makefile | 6 +-
> board/technexion/twister/Makefile | 38 ++
> board/technexion/twister/twister.c | 116 ++++++
> board/technexion/twister/twister.h | 411
> ++++++++++++++++++++
> board/timll/devkit8000/devkit8000.c | 19 +-
> board/ttcontrol/vision2/vision2.c | 3 +-
> boards.cfg | 3 +
> doc/README.SPL | 1 +
> doc/README.davinci | 9 +
> drivers/mmc/tegra2_mmc.h | 2 -
> drivers/mtd/spi/Makefile | 4 +
> drivers/mtd/spi/spi_spl_load.c | 58 +++
> drivers/spi/Makefile | 1 +
> drivers/spi/tegra2_spi.c | 279 +++++++++++++
> include/configs/da850evm.h | 87 ++++
> include/configs/harmony.h | 3 +
> include/configs/medcom.h | 64 +++
> include/configs/plutux.h | 64 +++
> include/configs/seaboard.h | 20 +
> include/configs/tam3517-common.h | 361
> +++++++++++++++++
> include/configs/tegra2-common.h | 5 +-
> include/configs/twister.h | 54 +++
> include/configs/ventana.h | 3 +
> include/spi_flash.h | 3 +
> lib/Makefile | 2 +
> tools/mkimage.c | 97 +++---
> 59 files changed, 2687 insertions(+), 134 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
> create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
> create mode 100644 board/avionic-design/common/tamonten.c
> create mode 100644 board/avionic-design/common/tamonten.h
> create mode 100644 board/avionic-design/medcom/Makefile
> create mode 100644 board/avionic-design/medcom/medcom.c
> create mode 100644 board/avionic-design/plutux/Makefile
> create mode 100644 board/avionic-design/plutux/plutux.c
> create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds
> create mode 100644 board/nvidia/common/Makefile
> create mode 100644 board/nvidia/common/uart-spi-switch.c
> create mode 100644 board/technexion/twister/Makefile
> create mode 100644 board/technexion/twister/twister.c
> create mode 100644 board/technexion/twister/twister.h
> create mode 100644 drivers/mtd/spi/spi_spl_load.c
> create mode 100644 drivers/spi/tegra2_spi.c
> create mode 100644 include/configs/medcom.h
> create mode 100644 include/configs/plutux.h
> create mode 100644 include/configs/tam3517-common.h
> create mode 100644 include/configs/twister.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
egrep patterns are full regular expressions; it uses a fast determi-
nistic algorithm that sometimes needs exponential space.
- unix manuals
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-12-24 9:27 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Following the opening of the merge window, the following changes since
commit bfcc40bb09b05c90cc3b1496abb270eb8aa72134:
Merge branch 'next' of ../next (2011-12-23 20:53:58 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Christian Riesch (7):
spl: display_options.o is required for SPI flash support in SPL
sf: Add spi_boot() to allow booting from SPI flash in an SPL
arm, davinci: Add SPL support for DA850 SoCs
arm, da850evm: Add an SPL for SPI boot
mkimage: Fix variable length header support
arm, davinci: Add support for generating AIS images to the Makefile
arm, davinci: Fix build warnings for cam_enc_4xx
Fabio Estevam (1):
vision2: Fix checkpatch warning
Simon Glass (14):
tegra2: Tidy UART selection
tegra2: Add UARTB support
tegra2: config: Enable SPI flash on Seaboard
tegra2: Enable SPI environment on Seaboard
tegra2: Implement SPI / UART GPIO switch
tegra2: spi: Support SPI / UART switch
tegra2: Plumb in SPI/UART switch code
tegra: Fix build error in plutux, medcom
tegra: Move cpu_init_cp15() to arch_cpu_init()
tegra: Move clock_early_init() to arch_cpu_init()
tegra: add clock_ll_start_uart() to enable UART prior to reloc
tegra: Add a function mux feature
tegra: Add support for UART init in cpu board.c
tegra: Move boards over to use arch-level board UART function
Stefano Babic (2):
ARM: omap3: added common configuration for Technexion TAM3517
ARM: omap3: add support to Technexion twister board
Thierry Reding (7):
tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
tegra2: Move tegra2_mmc_init() prototype to public header.
tegra2: Add common Avionic Design Tamonten support.
tegra2: Add Avionic Design Plutux support.
tegra2: Add Avionic Design Medcom support.
tegra2: Optimize out-of-tree build for Ventana.
Thomas Weber (1):
Devkit8000: Switch over to enable_gpmc_cs_config
Tom Warren (2):
tegra2: spi: Add SPI driver for Tegra2 SOC
arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
.gitignore | 1 +
MAINTAINERS | 6 +
Makefile | 13 +
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/spl.c | 35 ++-
arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
arch/arm/cpu/armv7/tegra2/board.c | 58 +++
arch/arm/cpu/armv7/tegra2/clock.c | 14 +
arch/arm/cpu/armv7/tegra2/config.mk | 2 +
arch/arm/cpu/armv7/tegra2/funcmux.c | 58 +++
arch/arm/include/asm/arch-tegra2/board.h | 30 ++
arch/arm/include/asm/arch-tegra2/clock.h | 11 +
arch/arm/include/asm/arch-tegra2/funcmux.h | 41 ++
arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++
arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 +++
board/avionic-design/common/tamonten.c | 116 ++++++
board/avionic-design/common/tamonten.h | 32 ++
board/avionic-design/medcom/Makefile | 50 +++
board/avionic-design/medcom/medcom.c | 45 +++
board/avionic-design/plutux/Makefile | 50 +++
board/avionic-design/plutux/plutux.c | 45 +++
board/davinci/da8xxevm/da850evm.c | 4 +-
board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++
board/nvidia/common/Makefile | 47 +++
board/nvidia/common/board.c | 73 +---
board/nvidia/common/board.h | 2 +-
board/nvidia/common/uart-spi-switch.c | 138 +++++++
board/nvidia/harmony/Makefile | 1 -
board/nvidia/harmony/harmony.c | 2 +-
board/nvidia/seaboard/Makefile | 1 -
board/nvidia/seaboard/seaboard.c | 5 +-
board/nvidia/ventana/Makefile | 6 +-
board/technexion/twister/Makefile | 38 ++
board/technexion/twister/twister.c | 116 ++++++
board/technexion/twister/twister.h | 411
++++++++++++++++++++
board/timll/devkit8000/devkit8000.c | 19 +-
board/ttcontrol/vision2/vision2.c | 3 +-
boards.cfg | 3 +
doc/README.SPL | 1 +
doc/README.davinci | 9 +
drivers/mmc/tegra2_mmc.h | 2 -
drivers/mtd/spi/Makefile | 4 +
drivers/mtd/spi/spi_spl_load.c | 58 +++
drivers/spi/Makefile | 1 +
drivers/spi/tegra2_spi.c | 279 +++++++++++++
include/configs/da850evm.h | 87 ++++
include/configs/harmony.h | 3 +
include/configs/medcom.h | 64 +++
include/configs/plutux.h | 64 +++
include/configs/seaboard.h | 20 +
include/configs/tam3517-common.h | 361
+++++++++++++++++
include/configs/tegra2-common.h | 5 +-
include/configs/twister.h | 54 +++
include/configs/ventana.h | 3 +
include/spi_flash.h | 3 +
lib/Makefile | 2 +
tools/mkimage.c | 97 +++---
59 files changed, 2687 insertions(+), 134 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
create mode 100644 board/avionic-design/common/tamonten.c
create mode 100644 board/avionic-design/common/tamonten.h
create mode 100644 board/avionic-design/medcom/Makefile
create mode 100644 board/avionic-design/medcom/medcom.c
create mode 100644 board/avionic-design/plutux/Makefile
create mode 100644 board/avionic-design/plutux/plutux.c
create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds
create mode 100644 board/nvidia/common/Makefile
create mode 100644 board/nvidia/common/uart-spi-switch.c
create mode 100644 board/technexion/twister/Makefile
create mode 100644 board/technexion/twister/twister.c
create mode 100644 board/technexion/twister/twister.h
create mode 100644 drivers/mtd/spi/spi_spl_load.c
create mode 100644 drivers/spi/tegra2_spi.c
create mode 100644 include/configs/medcom.h
create mode 100644 include/configs/plutux.h
create mode 100644 include/configs/tam3517-common.h
create mode 100644 include/configs/twister.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-12-19 16:55 Albert ARIBAUD
@ 2011-12-20 21:40 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-12-20 21:40 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EEF6C88.8090306@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 901de79a3792c81aefcbf207a34049e63f21362b:
>
> Prepare v2011.12-rc2 (2011-12-19 12:12:54 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Anatolij Gustschin (3):
> Fix building for mx51evk board
> ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20
> ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260
>
> Chris Lalancette (1):
> omap4_panda: Initialize the USB phy
>
> David M?ller (ELSOFT AG) (1):
> add print_cpuinfo to s3c24x0
>
> Heiko Schocher (1):
> arm, fdt: update ethernet mac address before booting Linux
>
> Ilya Yanok (1):
> arm926ejs: remove noop flush_dcache_all function
>
> Manfred Rudigier (1):
> davinci: Fixed wrong timebase clock frequency.
>
> Marek Vasut (2):
> M28: Fix tab indent in u-boot.bd
> PXA: Kill last remnants of set_GPIO_mode function
>
> arch/arm/cpu/arm920t/s3c24x0/Makefile | 1 +
> arch/arm/cpu/arm920t/s3c24x0/cpu_info.c | 54 +++++++++++++++++++++++++
> arch/arm/cpu/arm926ejs/cache.c | 5 --
> arch/arm/cpu/arm926ejs/davinci/timer.c | 2 +-
> arch/arm/include/asm/arch-omap4/clocks.h | 63
> ++++++++++++++++++++++++++++++
> arch/arm/lib/bootm.c | 2 +
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 1 -
> board/calao/tny_a9260/tny_a9260.c | 5 --
> board/denx/m28evk/u-boot.bd | 8 ++--
> board/freescale/mx51evk/mx51evk.c | 3 +-
> board/freescale/mx53loco/mx53loco.c | 3 +-
> board/lubbock/lubbock.c | 6 +++
> board/ti/panda/panda.c | 59
> ++++++++++++++++++++++++++++
> drivers/mmc/pxa_mmc.c | 5 --
> include/configs/sbc35_a9g20.h | 3 +
> include/configs/tny_a9260.h | 4 ++
> 16 files changed, 201 insertions(+), 23 deletions(-)
> create mode 100644 arch/arm/cpu/arm920t/s3c24x0/cpu_info.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's an old story about the person who wished his computer were as
easy to use as his telephone. That wish has come true, since I no
longer know how to use my telephone.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-12-19 16:55 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 901de79a3792c81aefcbf207a34049e63f21362b:
Prepare v2011.12-rc2 (2011-12-19 12:12:54 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Anatolij Gustschin (3):
Fix building for mx51evk board
ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20
ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260
Chris Lalancette (1):
omap4_panda: Initialize the USB phy
David M?ller (ELSOFT AG) (1):
add print_cpuinfo to s3c24x0
Heiko Schocher (1):
arm, fdt: update ethernet mac address before booting Linux
Ilya Yanok (1):
arm926ejs: remove noop flush_dcache_all function
Manfred Rudigier (1):
davinci: Fixed wrong timebase clock frequency.
Marek Vasut (2):
M28: Fix tab indent in u-boot.bd
PXA: Kill last remnants of set_GPIO_mode function
arch/arm/cpu/arm920t/s3c24x0/Makefile | 1 +
arch/arm/cpu/arm920t/s3c24x0/cpu_info.c | 54 +++++++++++++++++++++++++
arch/arm/cpu/arm926ejs/cache.c | 5 --
arch/arm/cpu/arm926ejs/davinci/timer.c | 2 +-
arch/arm/include/asm/arch-omap4/clocks.h | 63
++++++++++++++++++++++++++++++
arch/arm/lib/bootm.c | 2 +
board/calao/sbc35_a9g20/sbc35_a9g20.c | 1 -
board/calao/tny_a9260/tny_a9260.c | 5 --
board/denx/m28evk/u-boot.bd | 8 ++--
board/freescale/mx51evk/mx51evk.c | 3 +-
board/freescale/mx53loco/mx53loco.c | 3 +-
board/lubbock/lubbock.c | 6 +++
board/ti/panda/panda.c | 59
++++++++++++++++++++++++++++
drivers/mmc/pxa_mmc.c | 5 --
include/configs/sbc35_a9g20.h | 3 +
include/configs/tny_a9260.h | 4 ++
16 files changed, 201 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/cpu/arm920t/s3c24x0/cpu_info.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-12-11 13:38 Albert ARIBAUD
@ 2011-12-12 6:58 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-12-12 6:58 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EE4B24A.5080307@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit c90a4dd79cb17abb46689f27ff9f1c971362d6e2:
>
> post/post.c: Use lldiv for 64-bit divisions (2011-12-10 23:15:14 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Holger Brunck (1):
> post: fix compile issue for post tests on kirkwood
>
> Wolfgang Grandegger (1):
> arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints
>
> arch/arm/lib/eabi_compat.c | 4 ++++
> post/post.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
: ... and it's got weird formatting - Notepad, Write, Works 3 can't
: decipher it, and it's too big to go in DOS Edit. Help!
Install an operating system. :-) -- Tom Christiansen
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-12-11 13:38 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit c90a4dd79cb17abb46689f27ff9f1c971362d6e2:
post/post.c: Use lldiv for 64-bit divisions (2011-12-10 23:15:14 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Holger Brunck (1):
post: fix compile issue for post tests on kirkwood
Wolfgang Grandegger (1):
arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints
arch/arm/lib/eabi_compat.c | 4 ++++
post/post.c | 2 +-
2 files changed, 5 insertions(+), 1 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-12-09 16:42 Albert ARIBAUD
@ 2011-12-10 21:54 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-12-10 21:54 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EE23A7F.2090307@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit c4eba6ec5c58083b38340724c006294c7a4fe2eb:
>
> common/usb_kbd.c: fix bug introduced in commit 00b7d6e (2011-12-09
> 12:09:35 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Chander Kashyap (1):
> S5PC2XX: Rename S5pc2XX to exynos
>
> Jason Liu (4):
> i.mx: introduce the armv7/imx-common folder
> i.mx: add the initial support for freescale i.MX6Q processor
> i.mx: mxc_gpio: add the i.mx6q support
> i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
>
> Marek Vasut (4):
> M28: Document that units has to be set to sectors on SD bootcard
> M28: Fix typo
> i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
> M28: Cleanup memsize.o OOT build
>
> Simon Glass (9):
> tegra2: Add arch_cpu_init() to fire up Cortex-A9
> tegra2: Simplify tegra_start() boot path
> arm: Move CP15 init out of cpu_init_crit()
> tegra2: Enable instruction cache
> tegra2: Remove unneeded boot code
> tegra2: Remove unneeded config option
> tegra2: Remove unused low-level Tegra2 UART code
> tegra2: Remove unneeded 'dynamic ram size' message
> tegra2: Don't use board pointer before it is set up
>
> Stephen Warren (4):
> tegra2: Move board_mmc_init into board files
> tegra2: Modify MMC driver to handle power and cd GPIOs
> tegra2: Add support for Ventana
> tegra2: Use new GPIO APIs in gpio_config_uart()
>
> MAINTAINERS | 12 +-
> Makefile | 10 +-
> arch/arm/cpu/arm926ejs/mx28/Makefile | 4 +
> .../arm/cpu/arm926ejs/mx28/mx28_init.h | 0
> arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 +
> .../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
> .../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +-
> .../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0
> .../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +-
> arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile | 0
> arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c | 50 +-
> arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c | 0
> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
> arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 77 -
> arch/arm/cpu/armv7/mx6/Makefile | 48 +
> arch/arm/cpu/armv7/mx6/clock.c | 366 +++++
> arch/arm/cpu/armv7/mx6/iomux-v3.c | 71 +
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
> arch/arm/cpu/armv7/mx6/soc.c | 82 +
> arch/arm/cpu/armv7/start.S | 36 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 5 +
> arch/arm/cpu/armv7/tegra2/ap20.c | 54 +-
> arch/arm/cpu/armv7/tegra2/ap20.h | 10 +-
> arch/arm/cpu/armv7/tegra2/board.c | 35 +-
> arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 --
> .../asm/{arch-s5pc2xx => arch-exynos}/adc.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/clk.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/clock.h | 2 +-
> .../asm/{arch-s5pc2xx => arch-exynos}/cpu.h | 64 +-
> .../asm/{arch-s5pc2xx => arch-exynos}/gpio.h | 28 +-
> .../asm/{arch-s5pc2xx => arch-exynos}/mmc.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/pwm.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/sromc.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h | 0
> .../asm/{arch-s5pc2xx => arch-exynos}/uart.h | 0
> arch/arm/include/asm/arch-mx28/sys_proto.h | 6 +
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++
> arch/arm/include/asm/arch-mx6/clock.h | 50 +
> .../arm/include/asm/arch-mx6/gpio.h | 18 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
> arch/arm/include/asm/u-boot-arm.h | 3 +
> board/denx/m28evk/Makefile | 11 +-
> board/denx/m28evk/m28evk.c | 2 +-
> board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +-
> board/freescale/mx6qarm2/Makefile | 42 +
> board/freescale/mx6qarm2/imximage.cfg | 167 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
> board/nvidia/common/board.c | 58 +-
> board/nvidia/common/board.h | 4 +-
> board/nvidia/harmony/harmony.c | 57 +-
> board/nvidia/seaboard/seaboard.c | 81 +-
> board/nvidia/ventana/Makefile | 49 +
> board/samsung/origen/lowlevel_init.S | 26 +-
> board/samsung/origen/mem_setup.S | 12 +-
> board/samsung/origen/origen.c | 8 +-
> board/samsung/origen/origen_setup.h | 8 +-
> board/samsung/smdkv310/lowlevel_init.S | 22 +-
> board/samsung/smdkv310/mem_setup.S | 8 +-
> board/samsung/smdkv310/smdkv310.c | 8 +-
> board/samsung/universal_c210/lowlevel_init.S | 24 +-
> board/samsung/universal_c210/universal.c | 8 +-
> boards.cfg | 8 +-
> doc/README.m28 | 3 +-
> drivers/gpio/mxc_gpio.c | 4 +-
> drivers/gpio/tegra2_gpio.c | 6 +-
> drivers/mmc/tegra2_mmc.c | 42 +-
> drivers/mmc/tegra2_mmc.h | 4 +-
> drivers/serial/Makefile | 1 -
> drivers/serial/serial_tegra2.c | 77 -
> include/configs/m28evk.h | 6 +-
> include/configs/mx6qarm2.h | 162 ++
> include/configs/origen.h | 6 +-
> include/configs/s5pc210_universal.h | 10 +-
> include/configs/smdkv310.h | 6 +-
> include/configs/tegra2-common.h | 3 +-
> include/configs/ventana.h | 55 +
> 84 files changed, 4903 insertions(+), 703 deletions(-)
> rename board/denx/m28evk/m28_init.h =>
> arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
> rename board/denx/m28evk/mem_init.c =>
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
> rename board/denx/m28evk/power_init.c =>
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
> rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
> rename {board/denx/m28evk =>
> arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
> rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile (100%)
> rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c (81%)
> rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c (100%)
> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
> create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/adc.h (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clk.h (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clock.h (99%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/cpu.h (64%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/gpio.h (84%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/mmc.h (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/pwm.h (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sromc.h (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h
> (100%)
> rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/uart.h (100%)
> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
> rename drivers/serial/serial_tegra2.h =>
> arch/arm/include/asm/arch-mx6/gpio.h (75%)
> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
> create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
> rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
> create mode 100644 board/freescale/mx6qarm2/Makefile
> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
> create mode 100644 board/nvidia/ventana/Makefile
> delete mode 100644 drivers/serial/serial_tegra2.c
> create mode 100644 include/configs/mx6qarm2.h
> create mode 100644 include/configs/ventana.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"We learn from history that we learn nothing from history."
- George Bernard Shaw
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-12-09 16:42 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit c4eba6ec5c58083b38340724c006294c7a4fe2eb:
common/usb_kbd.c: fix bug introduced in commit 00b7d6e (2011-12-09
12:09:35 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Chander Kashyap (1):
S5PC2XX: Rename S5pc2XX to exynos
Jason Liu (4):
i.mx: introduce the armv7/imx-common folder
i.mx: add the initial support for freescale i.MX6Q processor
i.mx: mxc_gpio: add the i.mx6q support
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
Marek Vasut (4):
M28: Document that units has to be set to sectors on SD bootcard
M28: Fix typo
i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
M28: Cleanup memsize.o OOT build
Simon Glass (9):
tegra2: Add arch_cpu_init() to fire up Cortex-A9
tegra2: Simplify tegra_start() boot path
arm: Move CP15 init out of cpu_init_crit()
tegra2: Enable instruction cache
tegra2: Remove unneeded boot code
tegra2: Remove unneeded config option
tegra2: Remove unused low-level Tegra2 UART code
tegra2: Remove unneeded 'dynamic ram size' message
tegra2: Don't use board pointer before it is set up
Stephen Warren (4):
tegra2: Move board_mmc_init into board files
tegra2: Modify MMC driver to handle power and cd GPIOs
tegra2: Add support for Ventana
tegra2: Use new GPIO APIs in gpio_config_uart()
MAINTAINERS | 12 +-
Makefile | 10 +-
arch/arm/cpu/arm926ejs/mx28/Makefile | 4 +
.../arm/cpu/arm926ejs/mx28/mx28_init.h | 0
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 +
.../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
.../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +-
.../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0
.../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +-
arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile | 0
arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c | 50 +-
arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c | 0
arch/arm/cpu/armv7/imx-common/Makefile | 47 +
arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 77 -
arch/arm/cpu/armv7/mx6/Makefile | 48 +
arch/arm/cpu/armv7/mx6/clock.c | 366 +++++
arch/arm/cpu/armv7/mx6/iomux-v3.c | 71 +
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
arch/arm/cpu/armv7/mx6/soc.c | 82 +
arch/arm/cpu/armv7/start.S | 36 +-
arch/arm/cpu/armv7/tegra2/Makefile | 5 +
arch/arm/cpu/armv7/tegra2/ap20.c | 54 +-
arch/arm/cpu/armv7/tegra2/ap20.h | 10 +-
arch/arm/cpu/armv7/tegra2/board.c | 35 +-
arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 --
.../asm/{arch-s5pc2xx => arch-exynos}/adc.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/clk.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/clock.h | 2 +-
.../asm/{arch-s5pc2xx => arch-exynos}/cpu.h | 64 +-
.../asm/{arch-s5pc2xx => arch-exynos}/gpio.h | 28 +-
.../asm/{arch-s5pc2xx => arch-exynos}/mmc.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/pwm.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/sromc.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h | 0
.../asm/{arch-s5pc2xx => arch-exynos}/uart.h | 0
arch/arm/include/asm/arch-mx28/sys_proto.h | 6 +
arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++
arch/arm/include/asm/arch-mx6/clock.h | 50 +
.../arm/include/asm/arch-mx6/gpio.h | 18 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++
arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
arch/arm/include/asm/u-boot-arm.h | 3 +
board/denx/m28evk/Makefile | 11 +-
board/denx/m28evk/m28evk.c | 2 +-
board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +-
board/freescale/mx6qarm2/Makefile | 42 +
board/freescale/mx6qarm2/imximage.cfg | 167 ++
board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
board/nvidia/common/board.c | 58 +-
board/nvidia/common/board.h | 4 +-
board/nvidia/harmony/harmony.c | 57 +-
board/nvidia/seaboard/seaboard.c | 81 +-
board/nvidia/ventana/Makefile | 49 +
board/samsung/origen/lowlevel_init.S | 26 +-
board/samsung/origen/mem_setup.S | 12 +-
board/samsung/origen/origen.c | 8 +-
board/samsung/origen/origen_setup.h | 8 +-
board/samsung/smdkv310/lowlevel_init.S | 22 +-
board/samsung/smdkv310/mem_setup.S | 8 +-
board/samsung/smdkv310/smdkv310.c | 8 +-
board/samsung/universal_c210/lowlevel_init.S | 24 +-
board/samsung/universal_c210/universal.c | 8 +-
boards.cfg | 8 +-
doc/README.m28 | 3 +-
drivers/gpio/mxc_gpio.c | 4 +-
drivers/gpio/tegra2_gpio.c | 6 +-
drivers/mmc/tegra2_mmc.c | 42 +-
drivers/mmc/tegra2_mmc.h | 4 +-
drivers/serial/Makefile | 1 -
drivers/serial/serial_tegra2.c | 77 -
include/configs/m28evk.h | 6 +-
include/configs/mx6qarm2.h | 162 ++
include/configs/origen.h | 6 +-
include/configs/s5pc210_universal.h | 10 +-
include/configs/smdkv310.h | 6 +-
include/configs/tegra2-common.h | 3 +-
include/configs/ventana.h | 55 +
84 files changed, 4903 insertions(+), 703 deletions(-)
rename board/denx/m28evk/m28_init.h =>
arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
rename board/denx/m28evk/mem_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
rename board/denx/m28evk/power_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
rename {board/denx/m28evk =>
arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile (100%)
rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c (81%)
rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c (100%)
create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
mode change 100644 => 100755
create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/adc.h (100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clk.h (100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clock.h (99%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/cpu.h (64%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/gpio.h (84%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/mmc.h (100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/pwm.h (100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sromc.h (100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h
(100%)
rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/uart.h (100%)
create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
rename drivers/serial/serial_tegra2.h =>
arch/arm/include/asm/arch-mx6/gpio.h (75%)
create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
create mode 100644 board/freescale/mx6qarm2/Makefile
create mode 100644 board/freescale/mx6qarm2/imximage.cfg
create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
create mode 100644 board/nvidia/ventana/Makefile
delete mode 100644 drivers/serial/serial_tegra2.c
create mode 100644 include/configs/mx6qarm2.h
create mode 100644 include/configs/ventana.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-12-06 23:17 Albert ARIBAUD
@ 2011-12-07 10:16 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-12-07 10:16 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EDEA289.9070805@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
>
> net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Ajay Bhargav (1):
> net: Armada100: Fix compilation warnings
>
> Anatolij Gustschin (4):
> ARM: davinci_dm6467Tevm: Fix build breakage
> arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
> arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
> arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
>
> Aneesh V (13):
> armv7: disable L2 cache in cleanup_before_linux()
> armv7: include armv7/cpu.c in SPL build
> armv7: setup vector
> start.S: remove omap3 specific code from start.S
> omap: Improve PLL parameter calculation tool
> omap4: ttyO2 instead of ttyS2 in default bootargs
> omap: fix cache line size for omap3/omap4 boards
> omap4460: fix TPS initialization
> omap: remove I2C from SPL
> omap4: emif: fix error in driver
> omap4460: add ES1.1 identification
> omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
> omap4: fix IO setting
>
> Christian Riesch (9):
> arm, arm926ejs: Fix clear bss loop for zero length bss
> arm, davinci: Move pinmux functions from board to arch tree
> arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
> arm, da850evm: Do pinmux configuration for EMAC together with
> other pinmuxes
> arm, da850: Add pinmux configurations to the arch tree
> arm, da850evm: Use the pinmux configurations defined in the arch tree
> arm, hawkboard: Use the pinmux configurations defined in the arch
> tree
> arm, davinci: Remove duplication of pinmux configuration code
> arm: printf() is not available in some SPL configurations
>
> Fabio Estevam (5):
> mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
> mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
> mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
> mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
> mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
>
> Heiko Schocher (6):
> arm, arm926ejs: always do cpu critical inits
> arm, davinci: move davinci_rtc struct to hardware.h
> arm, davinci, da850: add uart1 tx rx pinmux config
> arm, board/davinci/common/misc.c: Codingstyle cleanup
> arm, davinci: move misc function in arch tree
> arm, davinci: add support for am1808 based enbw_cmc board
>
> Ilya Yanok (10):
> davinci_emac: move arch-independent defines to separate header
> davinci_emac: use internal addresses in buffer descriptors
> davinci_emac: conditionally compile specific PHY support
> arm926ejs: add noop implementation for dcache ops
> davinci_emac: fix for running with dcache enabled
> davinci_emac: hardcode 100Mbps for AM35xx and RMII
> AM35xx: add EMAC support
> AM3517: move AM3517 specific mux defines to generic header
> nand_spl_simple: add support for software ECC
> omap_gpmc: use SOFTECC in SPL if it's enabled
>
> Koen Kooi (1):
> BeagleBoard: config: Really switch to ttyO2
>
> Manjunath Hadli (1):
> da850evm: pass board revision info to kernel
>
> Marek Vasut (25):
> PXA: Drop CERF250 board
> PXA: Drop CRADLE board
> PXA: Drop PLEB2 board
> PXA: Drop XM250 board
> PXA: Rework start.S to be closer to other ARMs
> PXA: Re-add the Dcache locking as RAM for pxa250
> PXA: Fixup PXA25x boards after start.S update
> PXA: Drop Voipac PXA270 OneNAND IPL
> PXA: Adapt Voipac PXA270 to OneNAND SPL
> PXA: Enable command line editing for vpac270
> PXA: Unify vpac270 environment size
> PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
> PXA: Separate PXA2xx CPU init
> PXA: Add cpuinfo display for PXA2xx
> PXA: Replace timer driver
> PXA: Cleanup Colibri PXA270
> PXA: Export cpu_is_ and pxa_dram_init functions
> PXA: Squash extern pxa_dram_init()
> PXA: Rename pxa_dram_init to pxa2xx_dram_init
> PXA: Introduce common configuration header for PXA
> PXA: Flip colibri_pxa27x to pxa-common.h
> PXA: Move colibri_pxa270 to board/toradex/
> MC13892: Add REGMODE0 bits definitions
> Efika: Configure additional regulators for HDMI output
> MXS: Add static annotations to dma driver
>
> Prabhakar Lad (1):
> ARM: davici_emac: Fix condition for number of phy detects
>
> Robert Deli?n (1):
> M28: Fix OB1 bug in GPIO driver
>
> Sanjeev Premi (2):
> part_efi: Fix compile errors
> omap3evm: Add support for EFI partitions
>
> Simon Glass (1):
> mx5: Correct a warning in clock.c
>
> Simon Guinot (4):
> netspace_v2: Read Ethernet MAC address from EEPROM
> mvsata: fix ide_preinit for missing disks
> ARM: add support for LaCie 2Big Network v2
> ARM: remove duplicated code for LaCie boards
>
> Simon Schwarz (3):
> nand: Add common functions to linux/mtd/nand.h
> Fix regression in SMDK6400
> devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
>
> Stefano Babic (2):
> MX: serial_mxc: cleanup removing nasty #ifdef
> MX35: flea3: changes due to hardware revision B
>
> Sughosh Ganu (1):
> davinci: Remove unwanted memsize.c from hawkboard's nand spl build
>
> Thomas Weber (3):
> ARM: OMAP3: Remove unused define CONFIG_OMAP3430
> ARM: OMAP3: Remove unused define SDRC_R_C_B
> ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
>
> Tim Schendekehl (1):
> Ethernut 5 board support
>
> Tom Rini (15):
> omap3: mem: Comment enable_gpmc_cs_config more
> OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
> OMAP3: Add a helper function to set timings in SDRC
> OMAP3: Change mem_ok to clear again after reading back
> OMAP3: Remove get_mem_type prototype
> omap3: mem: Add MCFG helper macro
> OMAP3: Add optimal SDRC autorefresh control values
> OMAP3: Suffix all Micron memory timing parts with their speed
> OMAP3 SPL: Rework memory initalization and devkit8000 support
> OMAP3 SPL: Add identify_nand_chip function
> OMAP3: Add SPL support to Beagleboard
> OMAP3: Add SPL support to omap3_evm
> AM3517: Add SPL support
> AM3517 CraneBoard: Add SPL support
> OMAP3: Add SPL_BOARD_INIT hook
>
> Wolfram Sang (1):
> apbh_dma: return error value on timeout
>
> MAINTAINERS | 11 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 4 -
> arch/arm/cpu/arm926ejs/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/cache.c | 75 ++
> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +-
> arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 171 ++++
> arch/arm/cpu/arm926ejs/davinci/dp83848.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/et1011c.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 1 +
> arch/arm/cpu/arm926ejs/davinci/lxt972.c | 1 +
> .../arm/cpu/arm926ejs/davinci}/misc.c | 19 +-
> .../arm/cpu/arm926ejs/davinci/pinmux.c | 0
> arch/arm/cpu/arm926ejs/start.S | 14 +-
> arch/arm/cpu/armv7/Makefile | 4 +-
> arch/arm/cpu/armv7/cpu.c | 1 +
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 16 +-
> arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 10 +-
> arch/arm/cpu/armv7/omap3/Makefile | 4 +
> arch/arm/cpu/armv7/omap3/board.c | 5 +
> .../vpac270.c => arch/arm/cpu/armv7/omap3/emac.c | 34 +-
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +
> arch/arm/cpu/armv7/omap3/mem.c | 13 +-
> arch/arm/cpu/armv7/omap3/sdrc.c | 145 ++--
> arch/arm/cpu/armv7/omap3/spl_id_nand.c | 87 +++
> arch/arm/cpu/armv7/omap4/hwinit.c | 17 +-
> arch/arm/cpu/armv7/start.S | 38 +-
> arch/arm/cpu/pxa/Makefile | 7 +-
> arch/arm/cpu/pxa/cpuinfo.c | 132 ++++
> arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++--
> arch/arm/cpu/pxa/start.S | 456 ++++++------
> arch/arm/cpu/pxa/timer.c | 91 +--
> arch/arm/cpu/pxa/u-boot.lds | 6 +
> arch/arm/cpu/pxa/usb.c | 12 +-
> arch/arm/include/asm/arch-davinci/emac_defs.h | 289 -------
> arch/arm/include/asm/arch-davinci/hardware.h | 41 +
> arch/arm/include/asm/arch-davinci/pinmux_defs.h | 51 ++
> arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
> arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
> arch/arm/include/asm/arch-mx28/dma.h | 25 -
> arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
> arch/arm/include/asm/arch-omap3/am35x_def.h | 3 +
> arch/arm/include/asm/arch-omap3/emac_defs.h | 56 ++
> arch/arm/include/asm/arch-omap3/mem.h | 156 +++--
> arch/arm/include/asm/arch-omap3/mux.h | 41 +
> arch/arm/include/asm/arch-omap3/omap3.h | 1 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 4 +-
> arch/arm/include/asm/arch-omap4/omap.h | 2 +
> arch/arm/include/asm/arch-omap5/clocks.h | 16 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
> .../arm/include/asm/arch-pxa/pxa.h | 40 +-
> arch/arm/include/asm/omap_common.h | 5 +
> arch/arm/lib/eabi_compat.c | 2 +
> board/CarMediaLab/flea3/flea3.c | 4 +-
> board/LaCie/common/common.c | 87 +++
> board/LaCie/common/common.h | 20 +
> board/LaCie/edminiv2/Makefile | 5 +-
> board/LaCie/edminiv2/edminiv2.c | 30 +-
> board/{cradle => LaCie/net2big_v2}/Makefile | 33 +-
> board/LaCie/net2big_v2/kwbimage.cfg | 162 ++++
> board/LaCie/net2big_v2/net2big_v2.c | 126 +++
> .../edminiv2.h => net2big_v2/net2big_v2.h} | 32 +-
> board/LaCie/netspace_v2/Makefile | 5 +-
> board/LaCie/netspace_v2/netspace_v2.c | 51 +-
> board/LaCie/netspace_v2/netspace_v2.h | 8 -
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 15 -
> board/balloon3/balloon3.c | 4 +-
> board/cerf250/Makefile | 43 -
> board/cerf250/cerf250.c | 85 --
> board/cerf250/flash.c | 429 -----------
> board/cradle/cradle.c | 236 ------
> board/cradle/flash.c | 361 ---------
> board/davinci/da8xxevm/da830evm.c | 2 -
> board/davinci/da8xxevm/da850evm.c | 165 +----
> board/davinci/da8xxevm/hawkboard_nand_spl.c | 59 +--
> board/davinci/ea20/ea20.c | 2 -
> board/efikamx/efikamx.c | 15 +-
> board/{pleb2 => egnite/ethernut5}/Makefile | 20 +-
> board/egnite/ethernut5/ethernut5.c | 270 +++++++
> board/egnite/ethernut5/ethernut5_pwrman.c | 338 ++++++++
> board/egnite/ethernut5/ethernut5_pwrman.h | 68 ++
> board/{davinci/common => enbw/enbw_cmc}/Makefile | 12 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 607 +++++++++++++++
> board/freescale/mx51evk/mx51evk.c | 3 +
> board/freescale/mx53ard/mx53ard.c | 3 +
> board/freescale/mx53evk/mx53evk.c | 3 +
> board/freescale/mx53loco/mx53loco.c | 3 +
> board/freescale/mx53smd/mx53smd.c | 1 +
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/am3517evm/am3517evm.h | 40 -
> board/logicpd/am3517evm/config.mk | 30 -
> board/lubbock/lubbock.c | 4 +-
> board/palmld/palmld.c | 4 +-
> board/palmtc/palmtc.c | 4 +-
> board/pleb2/flash.c | 814
> --------------------
> board/pleb2/pleb2.c | 71 --
> board/pxa255_idp/pxa_idp.c | 4 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/am3517crane/am3517crane.h | 39 -
> board/ti/am3517crane/config.mk | 29 -
> board/ti/beagle/beagle.c | 71 ++-
> board/ti/beagle/config.mk | 33 -
> board/ti/evm/config.mk | 33 -
> board/ti/evm/evm.c | 41 +-
> board/ti/panda/panda_mux_data.h | 2 +-
> board/ti/sdp4430/sdp.c | 7 +
> board/ti/sdp4430/sdp4430_mux_data.h | 6 +-
> board/timll/devkit8000/devkit8000.c | 21 +
> board/{ => toradex}/colibri_pxa270/Makefile | 0
> .../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
> board/trizepsiv/conxs.c | 4 +-
> board/vpac270/Makefile | 4 +
> board/vpac270/onenand.c | 65 ++
> board/vpac270/u-boot-spl.lds | 92 +++
> board/vpac270/vpac270.c | 6 +-
> board/xaeniax/xaeniax.c | 4 +-
> board/xm250/Makefile | 43 -
> board/xm250/flash.c | 535 -------------
> board/xm250/xm250.c | 95 ---
> board/zipitz2/zipitz2.c | 4 +-
> boards.cfg | 15 +-
> common/lcd.c | 14 +-
> disk/part_efi.c | 2 +-
> doc/README.scrapyard | 4 +
> drivers/block/mvsata_ide.c | 14 +-
> drivers/dma/apbh_dma.c | 211 ++----
> drivers/gpio/mxs_gpio.c | 2 +-
> drivers/mmc/pxa_mmc.c | 7 +-
> drivers/mmc/pxa_mmc_gen.c | 4 +-
> drivers/mtd/nand/nand_base.c | 6 +-
> drivers/mtd/nand/nand_ecc.c | 2 +-
> drivers/mtd/nand/nand_spl_simple.c | 11 +-
> drivers/mtd/nand/omap_gpmc.c | 4 +-
> drivers/mtd/nand/s3c64xx.c | 28 +-
> drivers/net/armada100_fec.c | 14 +-
> drivers/net/davinci_emac.c | 94 ++-
> drivers/net/davinci_emac.h | 315 ++++++++
> drivers/net/lan91c96.h | 4 +-
> drivers/net/smc91111.h | 6 +-
> drivers/rtc/davinci.c | 26 -
> drivers/serial/serial_mxc.c | 37 +-
> drivers/serial/serial_pxa.c | 4 +-
> drivers/serial/usbtty.h | 2 +-
> drivers/usb/gadget/Makefile | 2 +-
> include/configs/am3517_crane.h | 64 ++-
> include/configs/am3517_evm.h | 64 ++-
> include/configs/apollon.h | 4 -
> include/configs/balloon3.h | 2 +-
> include/configs/cerf250.h | 229 ------
> include/configs/cm_t35.h | 8 -
> include/configs/colibri_pxa270.h | 103 +--
> include/configs/cradle.h | 358 ---------
> include/configs/da850_am18xxevm.h | 3 +-
> include/configs/da850evm.h | 1 +
> include/configs/davinci_dm6467Tevm.h | 1 +
> include/configs/devkit8000.h | 24 +-
> include/configs/dig297.h | 4 -
> include/configs/efikamx.h | 2 +-
> include/configs/enbw_cmc.h | 451 +++++++++++
> include/configs/ethernut5.h | 287 +++++++
> include/configs/flea3.h | 22 +-
> include/configs/hawkboard.h | 1 +
> include/configs/igep0020.h | 4 -
> include/configs/igep0030.h | 4 -
> include/configs/imx27lite-common.h | 2 +-
> include/configs/imx31_litekit.h | 4 +-
> include/configs/imx31_phycore.h | 2 +-
> include/configs/{netspace_v2.h => lacie_kw.h} | 29 +-
> include/configs/lubbock.h | 4 +-
> include/configs/mx25pdk.h | 2 +-
> include/configs/mx31ads.h | 4 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx35pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53ard.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/omap3_beagle.h | 71 ++-
> include/configs/omap3_evm.h | 34 +
> include/configs/omap3_evm_common.h | 41 +-
> include/configs/omap3_evm_quick_mmc.h | 10 +
> include/configs/omap3_evm_quick_nand.h | 22 +
> include/configs/omap3_mvblx.h | 10 +-
> include/configs/omap3_overo.h | 10 +-
> include/configs/omap3_pandora.h | 10 +-
> include/configs/omap3_sdp3430.h | 10 +-
> include/configs/omap3_zoom1.h | 10 +-
> include/configs/omap3_zoom2.h | 10 +-
> include/configs/omap4_common.h | 20 +-
> include/configs/omap5_evm.h | 19 +-
> include/configs/palmld.h | 2 +-
> include/configs/palmtc.h | 4 +-
> include/configs/pleb2.h | 266 -------
> include/configs/pxa-common.h | 60 ++
> include/configs/pxa255_idp.h | 4 +-
> include/configs/qong.h | 4 +-
> include/configs/trizepsiv.h | 2 +-
> include/configs/tt01.h | 2 +-
> include/configs/tx25.h | 2 +-
> include/configs/vision2.h | 2 +-
> include/configs/vpac270.h | 43 +-
> include/configs/xaeniax.h | 4 +-
> include/configs/xm250.h | 369 ---------
> include/configs/zipitz2.h | 2 +-
> include/configs/zmx25.h | 2 +-
> include/lcd.h | 5 +-
> include/linux/mtd/nand.h | 7 +
> include/mc13892.h | 16 +
> include/nand.h | 3 -
> nand_spl/board/davinci/da8xxevm/Makefile | 26 +-
> nand_spl/board/samsung/smdk6400/Makefile | 9 +-
> onenand_ipl/board/vpac270/Makefile | 79 --
> onenand_ipl/board/vpac270/config.mk | 1 -
> tools/omap/clocks_get_m_n.c | 187 +++---
> 219 files changed, 5433 insertions(+), 6288 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/cache.c
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
> rename {board/davinci/common => arch/arm/cpu/arm926ejs/davinci}/misc.c
> (90%)
> rename board/davinci/common/davinci_pinmux.c =>
> arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%)
> rename onenand_ipl/board/vpac270/vpac270.c =>
> arch/arm/cpu/armv7/omap3/emac.c (58%)
> create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
> create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
> rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
> create mode 100644 arch/arm/include/asm/arch-davinci/pinmux_defs.h
> create mode 100644 arch/arm/include/asm/arch-omap3/emac_defs.h
> rename onenand_ipl/board/vpac270/u-boot.onenand.lds =>
> arch/arm/include/asm/arch-pxa/pxa.h (50%)
> create mode 100644 board/LaCie/common/common.c
> create mode 100644 board/LaCie/common/common.h
> rename board/{cradle => LaCie/net2big_v2}/Makefile (57%)
> create mode 100644 board/LaCie/net2big_v2/kwbimage.cfg
> create mode 100644 board/LaCie/net2big_v2/net2big_v2.c
> rename board/LaCie/{edminiv2/edminiv2.h => net2big_v2/net2big_v2.h} (50%)
> delete mode 100644 board/cerf250/Makefile
> delete mode 100644 board/cerf250/cerf250.c
> delete mode 100644 board/cerf250/flash.c
> delete mode 100644 board/cradle/cradle.c
> delete mode 100644 board/cradle/flash.c
> rename board/{pleb2 => egnite/ethernut5}/Makefile (73%)
> create mode 100644 board/egnite/ethernut5/ethernut5.c
> create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.c
> create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.h
> rename board/{davinci/common => enbw/enbw_cmc}/Makefile (88%)
> create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c
> delete mode 100644 board/logicpd/am3517evm/config.mk
> delete mode 100644 board/pleb2/flash.c
> delete mode 100644 board/pleb2/pleb2.c
> delete mode 100644 board/ti/am3517crane/config.mk
> delete mode 100644 board/ti/beagle/config.mk
> delete mode 100644 board/ti/evm/config.mk
> rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
> rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
> create mode 100644 board/vpac270/onenand.c
> create mode 100644 board/vpac270/u-boot-spl.lds
> delete mode 100644 board/xm250/Makefile
> delete mode 100644 board/xm250/flash.c
> delete mode 100644 board/xm250/xm250.c
> create mode 100644 drivers/net/davinci_emac.h
> delete mode 100644 include/configs/cerf250.h
> delete mode 100644 include/configs/cradle.h
> create mode 100644 include/configs/enbw_cmc.h
> create mode 100644 include/configs/ethernut5.h
> rename include/configs/{netspace_v2.h => lacie_kw.h} (88%)
> delete mode 100644 include/configs/pleb2.h
> create mode 100644 include/configs/pxa-common.h
> delete mode 100644 include/configs/xm250.h
> delete mode 100644 onenand_ipl/board/vpac270/Makefile
> delete mode 100644 onenand_ipl/board/vpac270/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I will also, for an appropriate fee, certify that your keyboard is
object-oriented, and that the bits on your hard disk are template-
compatible. - Jeffrey S. Haemer in <411akr$3ga@cygnus.com>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-12-06 23:17 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Ajay Bhargav (1):
net: Armada100: Fix compilation warnings
Anatolij Gustschin (4):
ARM: davinci_dm6467Tevm: Fix build breakage
arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
Aneesh V (13):
armv7: disable L2 cache in cleanup_before_linux()
armv7: include armv7/cpu.c in SPL build
armv7: setup vector
start.S: remove omap3 specific code from start.S
omap: Improve PLL parameter calculation tool
omap4: ttyO2 instead of ttyS2 in default bootargs
omap: fix cache line size for omap3/omap4 boards
omap4460: fix TPS initialization
omap: remove I2C from SPL
omap4: emif: fix error in driver
omap4460: add ES1.1 identification
omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
omap4: fix IO setting
Christian Riesch (9):
arm, arm926ejs: Fix clear bss loop for zero length bss
arm, davinci: Move pinmux functions from board to arch tree
arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
arm, da850evm: Do pinmux configuration for EMAC together with
other pinmuxes
arm, da850: Add pinmux configurations to the arch tree
arm, da850evm: Use the pinmux configurations defined in the arch tree
arm, hawkboard: Use the pinmux configurations defined in the arch
tree
arm, davinci: Remove duplication of pinmux configuration code
arm: printf() is not available in some SPL configurations
Fabio Estevam (5):
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
Heiko Schocher (6):
arm, arm926ejs: always do cpu critical inits
arm, davinci: move davinci_rtc struct to hardware.h
arm, davinci, da850: add uart1 tx rx pinmux config
arm, board/davinci/common/misc.c: Codingstyle cleanup
arm, davinci: move misc function in arch tree
arm, davinci: add support for am1808 based enbw_cmc board
Ilya Yanok (10):
davinci_emac: move arch-independent defines to separate header
davinci_emac: use internal addresses in buffer descriptors
davinci_emac: conditionally compile specific PHY support
arm926ejs: add noop implementation for dcache ops
davinci_emac: fix for running with dcache enabled
davinci_emac: hardcode 100Mbps for AM35xx and RMII
AM35xx: add EMAC support
AM3517: move AM3517 specific mux defines to generic header
nand_spl_simple: add support for software ECC
omap_gpmc: use SOFTECC in SPL if it's enabled
Koen Kooi (1):
BeagleBoard: config: Really switch to ttyO2
Manjunath Hadli (1):
da850evm: pass board revision info to kernel
Marek Vasut (25):
PXA: Drop CERF250 board
PXA: Drop CRADLE board
PXA: Drop PLEB2 board
PXA: Drop XM250 board
PXA: Rework start.S to be closer to other ARMs
PXA: Re-add the Dcache locking as RAM for pxa250
PXA: Fixup PXA25x boards after start.S update
PXA: Drop Voipac PXA270 OneNAND IPL
PXA: Adapt Voipac PXA270 to OneNAND SPL
PXA: Enable command line editing for vpac270
PXA: Unify vpac270 environment size
PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
PXA: Separate PXA2xx CPU init
PXA: Add cpuinfo display for PXA2xx
PXA: Replace timer driver
PXA: Cleanup Colibri PXA270
PXA: Export cpu_is_ and pxa_dram_init functions
PXA: Squash extern pxa_dram_init()
PXA: Rename pxa_dram_init to pxa2xx_dram_init
PXA: Introduce common configuration header for PXA
PXA: Flip colibri_pxa27x to pxa-common.h
PXA: Move colibri_pxa270 to board/toradex/
MC13892: Add REGMODE0 bits definitions
Efika: Configure additional regulators for HDMI output
MXS: Add static annotations to dma driver
Prabhakar Lad (1):
ARM: davici_emac: Fix condition for number of phy detects
Robert Deli?n (1):
M28: Fix OB1 bug in GPIO driver
Sanjeev Premi (2):
part_efi: Fix compile errors
omap3evm: Add support for EFI partitions
Simon Glass (1):
mx5: Correct a warning in clock.c
Simon Guinot (4):
netspace_v2: Read Ethernet MAC address from EEPROM
mvsata: fix ide_preinit for missing disks
ARM: add support for LaCie 2Big Network v2
ARM: remove duplicated code for LaCie boards
Simon Schwarz (3):
nand: Add common functions to linux/mtd/nand.h
Fix regression in SMDK6400
devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
Stefano Babic (2):
MX: serial_mxc: cleanup removing nasty #ifdef
MX35: flea3: changes due to hardware revision B
Sughosh Ganu (1):
davinci: Remove unwanted memsize.c from hawkboard's nand spl build
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
ARM: OMAP3: Remove unused define SDRC_R_C_B
ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Tim Schendekehl (1):
Ethernut 5 board support
Tom Rini (15):
omap3: mem: Comment enable_gpmc_cs_config more
OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
OMAP3: Add a helper function to set timings in SDRC
OMAP3: Change mem_ok to clear again after reading back
OMAP3: Remove get_mem_type prototype
omap3: mem: Add MCFG helper macro
OMAP3: Add optimal SDRC autorefresh control values
OMAP3: Suffix all Micron memory timing parts with their speed
OMAP3 SPL: Rework memory initalization and devkit8000 support
OMAP3 SPL: Add identify_nand_chip function
OMAP3: Add SPL support to Beagleboard
OMAP3: Add SPL support to omap3_evm
AM3517: Add SPL support
AM3517 CraneBoard: Add SPL support
OMAP3: Add SPL_BOARD_INIT hook
Wolfram Sang (1):
apbh_dma: return error value on timeout
MAINTAINERS | 11 +-
arch/arm/cpu/arm1136/mx31/devices.c | 4 -
arch/arm/cpu/arm926ejs/Makefile | 2 +-
arch/arm/cpu/arm926ejs/cache.c | 75 ++
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 171 ++++
arch/arm/cpu/arm926ejs/davinci/dp83848.c | 1 +
arch/arm/cpu/arm926ejs/davinci/et1011c.c | 1 +
arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 1 +
arch/arm/cpu/arm926ejs/davinci/lxt972.c | 1 +
.../arm/cpu/arm926ejs/davinci}/misc.c | 19 +-
.../arm/cpu/arm926ejs/davinci/pinmux.c | 0
arch/arm/cpu/arm926ejs/start.S | 14 +-
arch/arm/cpu/armv7/Makefile | 4 +-
arch/arm/cpu/armv7/cpu.c | 1 +
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 16 +-
arch/arm/cpu/armv7/omap-common/emif-common.c | 4 +-
arch/arm/cpu/armv7/omap-common/spl.c | 10 +-
arch/arm/cpu/armv7/omap3/Makefile | 4 +
arch/arm/cpu/armv7/omap3/board.c | 5 +
.../vpac270.c => arch/arm/cpu/armv7/omap3/emac.c | 34 +-
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 +
arch/arm/cpu/armv7/omap3/mem.c | 13 +-
arch/arm/cpu/armv7/omap3/sdrc.c | 145 ++--
arch/arm/cpu/armv7/omap3/spl_id_nand.c | 87 +++
arch/arm/cpu/armv7/omap4/hwinit.c | 17 +-
arch/arm/cpu/armv7/start.S | 38 +-
arch/arm/cpu/pxa/Makefile | 7 +-
arch/arm/cpu/pxa/cpuinfo.c | 132 ++++
arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++--
arch/arm/cpu/pxa/start.S | 456 ++++++------
arch/arm/cpu/pxa/timer.c | 91 +--
arch/arm/cpu/pxa/u-boot.lds | 6 +
arch/arm/cpu/pxa/usb.c | 12 +-
arch/arm/include/asm/arch-davinci/emac_defs.h | 289 -------
arch/arm/include/asm/arch-davinci/hardware.h | 41 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 51 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
arch/arm/include/asm/arch-mx28/dma.h | 25 -
arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
arch/arm/include/asm/arch-omap3/am35x_def.h | 3 +
arch/arm/include/asm/arch-omap3/emac_defs.h | 56 ++
arch/arm/include/asm/arch-omap3/mem.h | 156 +++--
arch/arm/include/asm/arch-omap3/mux.h | 41 +
arch/arm/include/asm/arch-omap3/omap3.h | 1 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 4 +-
arch/arm/include/asm/arch-omap4/omap.h | 2 +
arch/arm/include/asm/arch-omap5/clocks.h | 16 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
.../arm/include/asm/arch-pxa/pxa.h | 40 +-
arch/arm/include/asm/omap_common.h | 5 +
arch/arm/lib/eabi_compat.c | 2 +
board/CarMediaLab/flea3/flea3.c | 4 +-
board/LaCie/common/common.c | 87 +++
board/LaCie/common/common.h | 20 +
board/LaCie/edminiv2/Makefile | 5 +-
board/LaCie/edminiv2/edminiv2.c | 30 +-
board/{cradle => LaCie/net2big_v2}/Makefile | 33 +-
board/LaCie/net2big_v2/kwbimage.cfg | 162 ++++
board/LaCie/net2big_v2/net2big_v2.c | 126 +++
.../edminiv2.h => net2big_v2/net2big_v2.h} | 32 +-
board/LaCie/netspace_v2/Makefile | 5 +-
board/LaCie/netspace_v2/netspace_v2.c | 51 +-
board/LaCie/netspace_v2/netspace_v2.h | 8 -
board/ait/cam_enc_4xx/cam_enc_4xx.c | 15 -
board/balloon3/balloon3.c | 4 +-
board/cerf250/Makefile | 43 -
board/cerf250/cerf250.c | 85 --
board/cerf250/flash.c | 429 -----------
board/cradle/cradle.c | 236 ------
board/cradle/flash.c | 361 ---------
board/davinci/da8xxevm/da830evm.c | 2 -
board/davinci/da8xxevm/da850evm.c | 165 +----
board/davinci/da8xxevm/hawkboard_nand_spl.c | 59 +--
board/davinci/ea20/ea20.c | 2 -
board/efikamx/efikamx.c | 15 +-
board/{pleb2 => egnite/ethernut5}/Makefile | 20 +-
board/egnite/ethernut5/ethernut5.c | 270 +++++++
board/egnite/ethernut5/ethernut5_pwrman.c | 338 ++++++++
board/egnite/ethernut5/ethernut5_pwrman.h | 68 ++
board/{davinci/common => enbw/enbw_cmc}/Makefile | 12 +-
board/enbw/enbw_cmc/enbw_cmc.c | 607 +++++++++++++++
board/freescale/mx51evk/mx51evk.c | 3 +
board/freescale/mx53ard/mx53ard.c | 3 +
board/freescale/mx53evk/mx53evk.c | 3 +
board/freescale/mx53loco/mx53loco.c | 3 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/am3517evm/am3517evm.h | 40 -
board/logicpd/am3517evm/config.mk | 30 -
board/lubbock/lubbock.c | 4 +-
board/palmld/palmld.c | 4 +-
board/palmtc/palmtc.c | 4 +-
board/pleb2/flash.c | 814
--------------------
board/pleb2/pleb2.c | 71 --
board/pxa255_idp/pxa_idp.c | 4 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/am3517crane/am3517crane.h | 39 -
board/ti/am3517crane/config.mk | 29 -
board/ti/beagle/beagle.c | 71 ++-
board/ti/beagle/config.mk | 33 -
board/ti/evm/config.mk | 33 -
board/ti/evm/evm.c | 41 +-
board/ti/panda/panda_mux_data.h | 2 +-
board/ti/sdp4430/sdp.c | 7 +
board/ti/sdp4430/sdp4430_mux_data.h | 6 +-
board/timll/devkit8000/devkit8000.c | 21 +
board/{ => toradex}/colibri_pxa270/Makefile | 0
.../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
board/trizepsiv/conxs.c | 4 +-
board/vpac270/Makefile | 4 +
board/vpac270/onenand.c | 65 ++
board/vpac270/u-boot-spl.lds | 92 +++
board/vpac270/vpac270.c | 6 +-
board/xaeniax/xaeniax.c | 4 +-
board/xm250/Makefile | 43 -
board/xm250/flash.c | 535 -------------
board/xm250/xm250.c | 95 ---
board/zipitz2/zipitz2.c | 4 +-
boards.cfg | 15 +-
common/lcd.c | 14 +-
disk/part_efi.c | 2 +-
doc/README.scrapyard | 4 +
drivers/block/mvsata_ide.c | 14 +-
drivers/dma/apbh_dma.c | 211 ++----
drivers/gpio/mxs_gpio.c | 2 +-
drivers/mmc/pxa_mmc.c | 7 +-
drivers/mmc/pxa_mmc_gen.c | 4 +-
drivers/mtd/nand/nand_base.c | 6 +-
drivers/mtd/nand/nand_ecc.c | 2 +-
drivers/mtd/nand/nand_spl_simple.c | 11 +-
drivers/mtd/nand/omap_gpmc.c | 4 +-
drivers/mtd/nand/s3c64xx.c | 28 +-
drivers/net/armada100_fec.c | 14 +-
drivers/net/davinci_emac.c | 94 ++-
drivers/net/davinci_emac.h | 315 ++++++++
drivers/net/lan91c96.h | 4 +-
drivers/net/smc91111.h | 6 +-
drivers/rtc/davinci.c | 26 -
drivers/serial/serial_mxc.c | 37 +-
drivers/serial/serial_pxa.c | 4 +-
drivers/serial/usbtty.h | 2 +-
drivers/usb/gadget/Makefile | 2 +-
include/configs/am3517_crane.h | 64 ++-
include/configs/am3517_evm.h | 64 ++-
include/configs/apollon.h | 4 -
include/configs/balloon3.h | 2 +-
include/configs/cerf250.h | 229 ------
include/configs/cm_t35.h | 8 -
include/configs/colibri_pxa270.h | 103 +--
include/configs/cradle.h | 358 ---------
include/configs/da850_am18xxevm.h | 3 +-
include/configs/da850evm.h | 1 +
include/configs/davinci_dm6467Tevm.h | 1 +
include/configs/devkit8000.h | 24 +-
include/configs/dig297.h | 4 -
include/configs/efikamx.h | 2 +-
include/configs/enbw_cmc.h | 451 +++++++++++
include/configs/ethernut5.h | 287 +++++++
include/configs/flea3.h | 22 +-
include/configs/hawkboard.h | 1 +
include/configs/igep0020.h | 4 -
include/configs/igep0030.h | 4 -
include/configs/imx27lite-common.h | 2 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/{netspace_v2.h => lacie_kw.h} | 29 +-
include/configs/lubbock.h | 4 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/omap3_beagle.h | 71 ++-
include/configs/omap3_evm.h | 34 +
include/configs/omap3_evm_common.h | 41 +-
include/configs/omap3_evm_quick_mmc.h | 10 +
include/configs/omap3_evm_quick_nand.h | 22 +
include/configs/omap3_mvblx.h | 10 +-
include/configs/omap3_overo.h | 10 +-
include/configs/omap3_pandora.h | 10 +-
include/configs/omap3_sdp3430.h | 10 +-
include/configs/omap3_zoom1.h | 10 +-
include/configs/omap3_zoom2.h | 10 +-
include/configs/omap4_common.h | 20 +-
include/configs/omap5_evm.h | 19 +-
include/configs/palmld.h | 2 +-
include/configs/palmtc.h | 4 +-
include/configs/pleb2.h | 266 -------
include/configs/pxa-common.h | 60 ++
include/configs/pxa255_idp.h | 4 +-
include/configs/qong.h | 4 +-
include/configs/trizepsiv.h | 2 +-
include/configs/tt01.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/vpac270.h | 43 +-
include/configs/xaeniax.h | 4 +-
include/configs/xm250.h | 369 ---------
include/configs/zipitz2.h | 2 +-
include/configs/zmx25.h | 2 +-
include/lcd.h | 5 +-
include/linux/mtd/nand.h | 7 +
include/mc13892.h | 16 +
include/nand.h | 3 -
nand_spl/board/davinci/da8xxevm/Makefile | 26 +-
nand_spl/board/samsung/smdk6400/Makefile | 9 +-
onenand_ipl/board/vpac270/Makefile | 79 --
onenand_ipl/board/vpac270/config.mk | 1 -
tools/omap/clocks_get_m_n.c | 187 +++---
219 files changed, 5433 insertions(+), 6288 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/cache.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
rename {board/davinci/common => arch/arm/cpu/arm926ejs/davinci}/misc.c
(90%)
rename board/davinci/common/davinci_pinmux.c =>
arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%)
rename onenand_ipl/board/vpac270/vpac270.c =>
arch/arm/cpu/armv7/omap3/emac.c (58%)
create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
create mode 100644 arch/arm/include/asm/arch-davinci/pinmux_defs.h
create mode 100644 arch/arm/include/asm/arch-omap3/emac_defs.h
rename onenand_ipl/board/vpac270/u-boot.onenand.lds =>
arch/arm/include/asm/arch-pxa/pxa.h (50%)
create mode 100644 board/LaCie/common/common.c
create mode 100644 board/LaCie/common/common.h
rename board/{cradle => LaCie/net2big_v2}/Makefile (57%)
create mode 100644 board/LaCie/net2big_v2/kwbimage.cfg
create mode 100644 board/LaCie/net2big_v2/net2big_v2.c
rename board/LaCie/{edminiv2/edminiv2.h => net2big_v2/net2big_v2.h} (50%)
delete mode 100644 board/cerf250/Makefile
delete mode 100644 board/cerf250/cerf250.c
delete mode 100644 board/cerf250/flash.c
delete mode 100644 board/cradle/cradle.c
delete mode 100644 board/cradle/flash.c
rename board/{pleb2 => egnite/ethernut5}/Makefile (73%)
create mode 100644 board/egnite/ethernut5/ethernut5.c
create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.c
create mode 100644 board/egnite/ethernut5/ethernut5_pwrman.h
rename board/{davinci/common => enbw/enbw_cmc}/Makefile (88%)
create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c
delete mode 100644 board/logicpd/am3517evm/config.mk
delete mode 100644 board/pleb2/flash.c
delete mode 100644 board/pleb2/pleb2.c
delete mode 100644 board/ti/am3517crane/config.mk
delete mode 100644 board/ti/beagle/config.mk
delete mode 100644 board/ti/evm/config.mk
rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
create mode 100644 board/vpac270/onenand.c
create mode 100644 board/vpac270/u-boot-spl.lds
delete mode 100644 board/xm250/Makefile
delete mode 100644 board/xm250/flash.c
delete mode 100644 board/xm250/xm250.c
create mode 100644 drivers/net/davinci_emac.h
delete mode 100644 include/configs/cerf250.h
delete mode 100644 include/configs/cradle.h
create mode 100644 include/configs/enbw_cmc.h
create mode 100644 include/configs/ethernut5.h
rename include/configs/{netspace_v2.h => lacie_kw.h} (88%)
delete mode 100644 include/configs/pleb2.h
create mode 100644 include/configs/pxa-common.h
delete mode 100644 include/configs/xm250.h
delete mode 100644 onenand_ipl/board/vpac270/Makefile
delete mode 100644 onenand_ipl/board/vpac270/config.mk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
@ 2011-11-17 22:04 ` Simon Glass
0 siblings, 0 replies; 261+ messages in thread
From: Simon Glass @ 2011-11-17 22:04 UTC (permalink / raw)
To: u-boot
Hi,
On Thu, Nov 17, 2011 at 2:03 PM, Tom Warren <TWarren@nvidia.com> wrote:
> Wolfgang,
>
>> -----Original Message-----
>> From: Stephen Warren
>> Sent: Thursday, November 17, 2011 2:59 PM
>> To: Wolfgang Denk; Mike Frysinger
>> Cc: Albert ARIBAUD; Simon Glass; Marek Vasut; u-boot at lists.denx.de; Tom
>> Warren
>> Subject: RE: [U-Boot] Pull request: u-boot-arm/master
>>
>> Wolfgang Denk wrote at Thursday, November 17, 2011 2:57 PM:
>> > In message <201111171639.19645.vapier@gentoo.org> you wrote:
>> > >
>> > > i think we need Wolfgang's support for setting up the repo. ?i don't
>> > > think
>> >
>> > No problem with that. ?u-boot-tegra ? u-boot-tegra2 ? or ... ?
>>
>> u-boot-tegra would be better than u-boot-tegra2; there's already Tegra 3,
>> and I hope that's not /too/ far off going upstream.
>
> u-boot-tegra. Tegra3 to follow before EOY (I hope), and others after that ...
u-boot-tegra it is!
Regards,
Simon
>
> Make me the custodian for now. I'll give you more names of other NVidians that will need push access later, if that's alright.
>
> Thanks,
>
> Tom
>>
>> --
>> nvpublic
>
>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-17 21:56 ` Wolfgang Denk
@ 2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
1 sibling, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-11-17 22:03 UTC (permalink / raw)
To: u-boot
Hi Wolfgang, Mike,
Le 17/11/2011 22:56, Wolfgang Denk a ?crit :
> Dear Mike Frysinger,
>
> In message<201111171639.19645.vapier@gentoo.org> you wrote:
>>
>> i think we need Wolfgang's support for setting up the repo. i don't think
>
> No problem with that. u-boot-tegra ? u-boot-tegra2 ? or ... ?
Simon will probably be better placed for answering. Personally I prefer
boot-tegra if tegra and tegra2 have much in common.
> Best regards,
>
> Wolfgang Denk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-17 21:39 ` Mike Frysinger
@ 2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
0 siblings, 2 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-11-17 21:56 UTC (permalink / raw)
To: u-boot
Dear Mike Frysinger,
In message <201111171639.19645.vapier@gentoo.org> you wrote:
>
> i think we need Wolfgang's support for setting up the repo. i don't think
No problem with that. u-boot-tegra ? u-boot-tegra2 ? or ... ?
> denx is running anything like gitolite for people to admin repos via ssh.
No.
> we need one name i think as the goto guy for the repo. i don't know of any
> other repo that allows more than one person to push to it, but i don't see a
> problem with allowing more than one ...
Actually there are a few, even though this is not broadly announced -
except for u-boot-staging, where all custodians have access.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Overflow on /dev/null, please empty the bit bucket.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-17 13:45 ` Albert ARIBAUD
@ 2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Mike Frysinger @ 2011-11-17 21:39 UTC (permalink / raw)
To: u-boot
On Thursday 17 November 2011 08:45:21 Albert ARIBAUD wrote:
> Le 16/11/2011 04:53, Mike Frysinger a ?crit :
> > i thought Albert said he didn't want this last time we explicitly asked
> > about creating an arm/tegra sub-arch tree ...
> >
> > i think there should be one
>
> Uhm, no, I don't think I said I was against creating a Tegra U-Boot
> repo. What I may have said is that I don't want to fetch from a repo
> located somewhere else that on the Denx git server. If a u-boot-tegra
> repo is created on the Denx server, I'll be happy to pull from it.
i don't think we ever suggested the repo would be anywhere other than on the
denx site, and i don't recall your response including "external to denx"
qualifiers. but let's skip the semantics and on to the end game.
i think we need Wolfgang's support for setting up the repo. i don't think
denx is running anything like gitolite for people to admin repos via ssh.
we need one name i think as the goto guy for the repo. i don't know of any
other repo that allows more than one person to push to it, but i don't see a
problem with allowing more than one ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20111117/9d5394fb/attachment.pgp>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
@ 2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
1 sibling, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-11-17 13:45 UTC (permalink / raw)
To: u-boot
Hi Mike,
Le 16/11/2011 04:53, Mike Frysinger a ?crit :
> i thought Albert said he didn't want this last time we explicitly asked about
> creating an arm/tegra sub-arch tree ...
>
> i think there should be one
> -mike
Uhm, no, I don't think I said I was against creating a Tegra U-Boot
repo. What I may have said is that I don't want to fetch from a repo
located somewhere else that on the Denx git server. If a u-boot-tegra
repo is created on the Denx server, I'll be happy to pull from it.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
@ 2011-11-16 19:42 ` Wolfgang Denk
2 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-11-16 19:42 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EC2D979.6090301@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> 07:44:52 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Alexander Holler (1):
> BeagleBoard: config: Switch to ttyO2
>
> Asen Dimov (1):
> ARM: define CONFIG_MACH_TYPE for all ronetix boards
>
> Christian Riesch (3):
> arm, davinci: Rename AM1808 lowlevel functions to DA850
> arm, davinci: Remove the duplication of LPSC functions
> arm, davinci: Fix setting of the SDRAM configuration register
>
> David M?ller (ELSOFT AG) (2):
> ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
> ARM: remove superfluous setting of arch_number in board specific
> code.
>
> Fabio Estevam (5):
> qong: Use generic function for configuring GPR register
> mx31: Remove duplicate definition for GPR register
> mx31: Use proper IO accessor for GPR register
> mx31: Fix checkpatch warnings in generic.c
> m28evk: Fix comment about the number of RAM banks
>
> Heiko Schocher (3):
> arm, davinci: da850/dm365 lowlevel cleanup
> arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
> arm, davinci: add DAVINCI_MMC_CLKID
>
> Linus Walleij (7):
> integrator: do not test first part of the memory
> integrator: pass configs for core modules
> integrator: move text offset to config
> integrator: use io-accessors for board init
> integrator: make flash writeable on boot
> integrator: add system controller header
> integrator: enable Vpp and disable flash protection
>
> Manjunath Hadli (2):
> dm646x: add new configuration for dm6467T
> dm646x: pass board revision info to kernel
>
> Marek Vasut (27):
> SPL: Allow ARM926EJS to avoid compiling in the CPU support code
> iMX28: Initial support for iMX28 CPU
> iMX28: Add SSP MMC driver
> FEC: Add support for iMX28 quirks
> iMX28: Add PINMUX control
> iMX28: Add I2C bus driver
> iMX28: Add GPIO control
> iMX28: Add SPI driver
> iMX28: Add APBH DMA driver
> iMX28: Add GPMI NAND driver
> iMX28: Add driver for internal RTC
> iMX28: Add image header generator tool
> iMX28: Add u-boot.sb target to Makefile
> iMX28: Add support for DENX M28EVK board
> M28: Add MMC SPL
> M28: Add doc/README.m28 documentation
> iMX28: Fix ARM vector handling
> M28: Add memory detection into SPL
> iMX28: Add USB and USB PHY register definitions
> iMX28: Add USB HOST driver
> M28EVK: Enable USB HOST support
> PXA: Drop csb226 and innokom boards (unmaintained)
> PXA: Cleanup serial_pxa
> PXA: vpac270: Enable the new generic MMC driver
> OneNAND: Add simple OneNAND SPL
> GCC4.6: Fix common/usb.c on xscale
> GCC4.6: Squash warnings in onenand_base.c
>
> Nagabhushana Netagunte (1):
> da850: add new config file for AM18xx
>
> Po-Yu Chuang (1):
> arm: a320: fix broken timer
>
> Prabhakar Lad (1):
> da8xxevm: fix build error
>
> Sricharan (7):
> omap4: make omap4 code common for future reuse
> omap: Checkpatch fixes
> omap5: Add minimal support for omap5430.
> omap5: clocks: Add clocks support for omap5 platform.
> omap5: emif: Add emif/ddr configurations required for omap5 evm
> omap4/5: Add support for booting with CH.
> omap5: Add omap5_evm board build support.
>
> Stefano Babic (1):
> MX25: zmx25: GCC4.6 fix build warnings
>
> Tom Rini (2):
> devkit8000: Fix NAND SPL on boards with 256MB NAND
> OMAP3: Change omap3_evm maintainer
>
> .gitignore | 1 +
> MAINTAINERS | 15 +-
> Makefile | 14 +-
> README | 6 +
> arch/arm/cpu/arm1136/mx31/generic.c | 11 +-
> arch/arm/cpu/arm920t/a320/timer.c | 134 +--
> arch/arm/cpu/arm926ejs/Makefile | 6 +
> arch/arm/cpu/arm926ejs/davinci/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 -------
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 311 +++++
> arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 73 +-
> .../arm/cpu/arm926ejs/mx28}/Makefile | 11 +-
> arch/arm/cpu/arm926ejs/mx28/clock.c | 355 ++++++
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 ++
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 ++++
> arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
> arch/arm/cpu/armv7/omap-common/Makefile | 13 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 609 ++++++++++
> arch/arm/cpu/armv7/omap-common/emif-common.c | 1140
> +++++++++++++++++
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 267 ++++
> .../armv7/{omap4 => omap-common}/lowlevel_init.S | 37 +-
> .../{omap4/mem.c => omap-common/mem-common.c} | 0
> arch/arm/cpu/armv7/omap-common/spl.c | 9 +-
> arch/arm/cpu/armv7/omap4/Makefile | 11 +-
> arch/arm/cpu/armv7/omap4/board.c | 384 ------
> arch/arm/cpu/armv7/omap4/clocks.c | 628 ++--------
> arch/arm/cpu/armv7/omap4/emif.c | 1135
> +-----------------
> arch/arm/cpu/armv7/omap4/hwinit.c | 167 +++
> arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 83 --
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 2 +-
> arch/arm/cpu/armv7/omap5/Makefile | 48 +
> arch/arm/cpu/armv7/omap5/clocks.c | 432 +++++++
> arch/arm/cpu/armv7/omap5/config.mk | 28 +
> arch/arm/cpu/armv7/omap5/emif.c | 105 ++
> arch/arm/cpu/armv7/omap5/hwinit.c | 78 ++
> arch/arm/cpu/armv7/omap5/sdram_elpida.c | 178 +++
> arch/arm/include/asm/arch-davinci/aintc_defs.h | 2 +
> .../{am1808_lowlevel.h => da850_lowlevel.h} | 26 +-
> arch/arm/include/asm/arch-davinci/ddr2_defs.h | 4 +
> arch/arm/include/asm/arch-davinci/emif_defs.h | 1 +
> arch/arm/include/asm/arch-davinci/hardware.h | 22 +
> arch/arm/include/asm/arch-davinci/pll_defs.h | 14 +
> arch/arm/include/asm/arch-mx28/clock.h | 61 +
> arch/arm/include/asm/arch-mx28/dma.h | 170 +++
> arch/arm/include/asm/arch-mx28/gpio.h | 32 +
> arch/arm/include/asm/arch-mx28/imx-regs.h | 39 +
> arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 ++++++++
> arch/arm/include/asm/arch-mx28/iomux.h | 168 +++
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++
> arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
> arch/arm/include/asm/arch-mx28/regs-bch.h | 230 ++++
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 +++++
> arch/arm/include/asm/arch-mx28/regs-common.h | 66 +
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 ++++
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 +++
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-power.h | 413 +++++++
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 ++++++
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 +++
> arch/arm/include/asm/arch-mx28/regs-usb.h | 178 +++
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++
> arch/arm/include/asm/arch-mx28/sys_proto.h | 32 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +-
> arch/arm/include/asm/arch-omap3/mmc_host_def.h | 11 +-
> arch/arm/include/asm/arch-omap4/clocks.h | 23 +
> arch/arm/include/asm/arch-omap4/emif.h | 1021 ----------------
> arch/arm/include/asm/arch-omap4/mmc_host_def.h | 11 +-
> .../arm/include/asm/arch-omap4/{omap4.h => omap.h} | 46 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 38 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 722 +++++++++++
> arch/arm/include/asm/arch-omap5/cpu.h | 175 +++
> arch/arm/include/asm/arch-omap5/gpio.h | 50 +
> arch/arm/include/asm/arch-omap5/i2c.h | 74 ++
> arch/arm/include/asm/arch-omap5/mmc_host_def.h | 174 +++
> arch/arm/include/asm/arch-omap5/mux_omap5.h | 344 ++++++
> arch/arm/include/asm/arch-omap5/omap.h | 223 ++++
> arch/arm/include/asm/arch-omap5/sys_proto.h | 122 ++
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 --
> arch/arm/include/asm/arch-pxa/regs-uart.h | 109 ++
> arch/arm/include/asm/armv7.h | 3 +
> arch/arm/include/asm/emif.h | 1035 ++++++++++++++++
> arch/arm/include/asm/mach-types.h | 13 +
> arch/arm/include/asm/omap_common.h | 31 +-
> board/armltd/integrator/arm-ebi.h | 62 +
> board/armltd/integrator/config.mk | 5 -
> board/armltd/integrator/integrator-sc.h | 91 ++
> board/armltd/integrator/integrator.c | 63 +-
> board/csb226/csb226.c | 166 ---
> board/csb226/flash.c | 368 ------
> board/davedenx/qong/qong.c | 2 +-
> board/davinci/dm6467evm/dm6467evm.c | 20 +
> board/denx/m28evk/Makefile | 56 +
> .../sys_info.c => board/denx/m28evk/m28_init.h | 48 +-
> board/denx/m28evk/m28evk.c | 216 ++++
> board/denx/m28evk/mem_init.c | 240 ++++
> board/denx/m28evk/mmc_boot.c | 273 +++++
> board/denx/m28evk/power_init.c | 913 ++++++++++++++
> board/denx/m28evk/start.S | 234 ++++
> board/denx/m28evk/u-boot-spl.lds | 87 ++
> board/denx/m28evk/u-boot.bd | 14 +
> board/innokom/flash.c | 421 -------
> board/innokom/innokom.c | 190 ---
> board/mpl/vcma9/vcma9.c | 3 -
> board/ronetix/pm9261/pm9261.c | 3 -
> board/ronetix/pm9263/pm9263.c | 3 -
> board/ronetix/pm9g45/pm9g45.c | 2 -
> board/syteco/zmx25/zmx25.c | 2 -
> board/{innokom => ti/omap5_evm}/Makefile | 12 +-
> board/ti/omap5_evm/evm.c | 101 ++
> board/ti/omap5_evm/mux_data.h | 275 +++++
> board/ti/panda/Makefile | 2 -
> board/ti/panda/panda.c | 27 +-
> board/ti/panda/panda_mux_data.h | 54 +-
> board/ti/sdp4430/Makefile | 4 +-
> board/ti/sdp4430/sdp.c | 27 +-
> board/ti/sdp4430/sdp4430_mux_data.h | 53 +-
> board/vpac270/vpac270.c | 9 +
> boards.cfg | 22 +-
> common/usb.c | 13 +-
> doc/README.m28 | 223 ++++
> drivers/dma/Makefile | 1 +
> drivers/dma/apbh_dma.c | 691 +++++++++++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/mxs_gpio.c | 136 ++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/mxs_i2c.c | 246 ++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/mxsmmc.c | 351 ++++++
> drivers/mmc/omap_hsmmc.c | 26 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mxs_nand.c | 1118
> +++++++++++++++++
> drivers/mtd/onenand/Makefile | 4 +
> drivers/mtd/onenand/onenand_base.c | 18 +-
> drivers/mtd/onenand/onenand_spl.c | 146 +++
> drivers/net/davinci_emac.c | 24 +-
> drivers/net/fec_mxc.c | 44 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mxsrtc.c | 86 ++
> drivers/serial/serial_pxa.c | 464 +++-----
> drivers/spi/Makefile | 1 +
> drivers/spi/mxs_spi.c | 186 +++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-mxs.c | 154 +++
> include/configs/VCMA9.h | 4 +
> include/configs/csb226.h | 506 --------
> include/configs/da850_am18xxevm.h | 245 ++++
> include/configs/davinci_dm6467Tevm.h | 163 +++
> include/configs/davinci_dm6467evm.h | 1 +
> include/configs/devkit8000.h | 1 +
> include/configs/innokom.h | 507 --------
> include/configs/integratorap.h | 1 +
> include/configs/integratorcp.h | 1 +
> include/configs/m28evk.h | 303 +++++
> include/configs/omap3_beagle.h | 2 +-
> include/configs/omap4_common.h | 7 +-
> include/configs/omap5_evm.h | 284 +++++
> include/configs/pm9261.h | 3 +
> include/configs/pm9263.h | 3 +
> include/configs/pm9g45.h | 3 +
> include/configs/vpac270.h | 3 +-
> include/onenand_uboot.h | 3 +
> spl/Makefile | 4 +
> tools/.gitignore | 1 +
> tools/Makefile | 6 +
> tools/mxsboot.c | 684 +++++++++++
> 167 files changed, 21354 insertions(+), 6487 deletions(-)
> delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
> rename {board/csb226 => arch/arm/cpu/arm926ejs/mx28}/Makefile (86%)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c
> rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%)
> rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%)
> delete mode 100644 arch/arm/cpu/armv7/omap4/board.c
> create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c
> delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
> create mode 100644 arch/arm/cpu/armv7/omap5/Makefile
> create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
> create mode 100644 arch/arm/cpu/armv7/omap5/config.mk
> create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
> create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c
> create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
> rename arch/arm/include/asm/arch-davinci/{am1808_lowlevel.h =>
> da850_lowlevel.h} (63%)
> create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
> create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
> create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
> create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
> delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
> rename arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%)
> create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h
> create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h
> create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h
> create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h
> create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h
> create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h
> create mode 100644 arch/arm/include/asm/arch-omap5/omap.h
> create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h
> create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
> create mode 100644 arch/arm/include/asm/emif.h
> create mode 100644 board/armltd/integrator/arm-ebi.h
> delete mode 100644 board/armltd/integrator/config.mk
> create mode 100644 board/armltd/integrator/integrator-sc.h
> delete mode 100644 board/csb226/csb226.c
> delete mode 100644 board/csb226/flash.c
> create mode 100644 board/denx/m28evk/Makefile
> rename arch/arm/cpu/armv7/omap4/sys_info.c =>
> board/denx/m28evk/m28_init.h (53%)
> create mode 100644 board/denx/m28evk/m28evk.c
> create mode 100644 board/denx/m28evk/mem_init.c
> create mode 100644 board/denx/m28evk/mmc_boot.c
> create mode 100644 board/denx/m28evk/power_init.c
> create mode 100644 board/denx/m28evk/start.S
> create mode 100644 board/denx/m28evk/u-boot-spl.lds
> create mode 100644 board/denx/m28evk/u-boot.bd
> delete mode 100644 board/innokom/flash.c
> delete mode 100644 board/innokom/innokom.c
> rename board/{innokom => ti/omap5_evm}/Makefile (86%)
> create mode 100644 board/ti/omap5_evm/evm.c
> create mode 100644 board/ti/omap5_evm/mux_data.h
> create mode 100644 doc/README.m28
> create mode 100644 drivers/dma/apbh_dma.c
> create mode 100644 drivers/gpio/mxs_gpio.c
> create mode 100644 drivers/i2c/mxs_i2c.c
> create mode 100644 drivers/mmc/mxsmmc.c
> create mode 100644 drivers/mtd/nand/mxs_nand.c
> create mode 100644 drivers/mtd/onenand/onenand_spl.c
> create mode 100644 drivers/rtc/mxsrtc.c
> create mode 100644 drivers/spi/mxs_spi.c
> create mode 100644 drivers/usb/host/ehci-mxs.c
> delete mode 100644 include/configs/csb226.h
> create mode 100644 include/configs/da850_am18xxevm.h
> create mode 100644 include/configs/davinci_dm6467Tevm.h
> delete mode 100644 include/configs/innokom.h
> create mode 100644 include/configs/m28evk.h
> create mode 100644 include/configs/omap5_evm.h
> create mode 100644 tools/mxsboot.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I thought my people would grow tired of killing. But you were right,
they see it is easier than trading. And it has its pleasures. I feel
it myself. Like the hunt, but with richer rewards.
-- Apella, "A Private Little War", stardate 4211.8
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 4:05 ` Simon Glass
@ 2011-11-16 19:24 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-11-16 19:24 UTC (permalink / raw)
To: u-boot
Dear Simon Glass,
In message <CAPnjgZ0PO2ZdcGhtD-dt0PNv3G6sFDzZjsUTL_-6v1wQ10ASzw@mail.gmail.com> you wrote:
>
> We have built up quite a large number of patches which are currently
> sitting in the Chromium tree - something like 200. If we continue to
> dribble these out at 10-20 a month it will take a while. Current
> mainline U-Boot support for Tegra is pretty basic, but with these
> patches it is pretty slick. It would be great to take advantage of the
> oppty at the moment to upstream this material. Tegra 30 is already
> starting to get into the kernel and I feel U-Boot is behind! We are
> the boot loader. We need to be ahead :-)
Then let's try out this new u-boot-staging thing [1]. I suggest
somebody (not the original poster, of course) reviews and pushes the
stuff into a branch in this repo, and sends then a pull request to
Albert. Either it works better, or else not much is lost either.
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/117084
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You could end up being oddly sad and full of a strange, diffuse com-
passion which would lead you to believe that it might be a good idea
to wipe out the whole human race and start again with amoebas.
- Terry Pratchett, _Guards! Guards!_
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
@ 2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2 siblings, 0 replies; 261+ messages in thread
From: Heiko Schocher @ 2011-11-16 6:28 UTC (permalink / raw)
To: u-boot
Hello Albert,
Albert ARIBAUD wrote:
> Hi Wolfgang,
>
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> 07:44:52 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
[...]
> Heiko Schocher (3):
> arm, davinci: da850/dm365 lowlevel cleanup
> arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
> arm, davinci: add DAVINCI_MMC_CLKID
missing here this patch:
[U-Boot,1/2] arm, arm926ejs: always do cpu critical inits
http://patchwork.ozlabs.org/patch/124787/
Did you found time to look at it?
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 3:53 ` Mike Frysinger
@ 2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Simon Glass @ 2011-11-16 4:05 UTC (permalink / raw)
To: u-boot
Hi Mike,
On Tue, Nov 15, 2011 at 7:53 PM, Mike Frysinger <vapier@gentoo.org> wrote:
> On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
>> On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
>> >> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
>> >> > Hi Wolfgang,
>> >> >
>> >> > The following changes since commit
>> >> > 5721385b187b3154c7768e6c182501022f4e2e45:
>> >> >
>> >> > ? Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
>> >> > (2011-11-08 07:44:52 +0100)
>> >> >
>> >> > are available in the git repository at:
>> >> >
>> >> > ? git://git.denx.de/u-boot-arm.git master
>> >>
>> >> As with the last pull request, I don't see the Tegra patches in your
>> >> list here. Is the problem that we don't have our own Tegra maintainer?
>> >>
>> >> Please can you suggest what we can do here to get things moving?
>> >
>> > CCing Wolfgang.
>> >
>> > It'd be good to get a tegra maintainer -- suggestions?
>>
>> +Mike also who has helped reviewing some of this and might have ideas.
>
> i thought Albert said he didn't want this last time we explicitly asked about
> creating an arm/tegra sub-arch tree ...
>
> i think there should be one
> -mike
>
Yes, I found it, you said:
>> if people dont care either way, we can just set up a u-boot/u-boot-tegra.git
>> tree for Albert to pull from
and Albert replied:
> Seems like people don't care, and I'm fine with applying the patches myself, but I don't want to pull from a tree: I'll apply the patches as they appear on patchwork.
We have built up quite a large number of patches which are currently
sitting in the Chromium tree - something like 200. If we continue to
dribble these out at 10-20 a month it will take a while. Current
mainline U-Boot support for Tegra is pretty basic, but with these
patches it is pretty slick. It would be great to take advantage of the
oppty at the moment to upstream this material. Tegra 30 is already
starting to get into the kernel and I feel U-Boot is behind! We are
the boot loader. We need to be ahead :-)
Regards,
Simon
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 3:45 ` Simon Glass
@ 2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-17 13:45 ` Albert ARIBAUD
0 siblings, 2 replies; 261+ messages in thread
From: Mike Frysinger @ 2011-11-16 3:53 UTC (permalink / raw)
To: u-boot
On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
> On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
> >> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
> >> > Hi Wolfgang,
> >> >
> >> > The following changes since commit
> >> > 5721385b187b3154c7768e6c182501022f4e2e45:
> >> >
> >> > Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
> >> > (2011-11-08 07:44:52 +0100)
> >> >
> >> > are available in the git repository at:
> >> >
> >> > git://git.denx.de/u-boot-arm.git master
> >>
> >> As with the last pull request, I don't see the Tegra patches in your
> >> list here. Is the problem that we don't have our own Tegra maintainer?
> >>
> >> Please can you suggest what we can do here to get things moving?
> >
> > CCing Wolfgang.
> >
> > It'd be good to get a tegra maintainer -- suggestions?
>
> +Mike also who has helped reviewing some of this and might have ideas.
i thought Albert said he didn't want this last time we explicitly asked about
creating an arm/tegra sub-arch tree ...
i think there should be one
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20111115/9644e5f6/attachment.pgp
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 2:27 ` Marek Vasut
@ 2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
0 siblings, 1 reply; 261+ messages in thread
From: Simon Glass @ 2011-11-16 3:45 UTC (permalink / raw)
To: u-boot
Hi,
On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> Hi Albert,
>>
>> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
>>
>> <albert.u.boot@aribaud.net> wrote:
>> > Hi Wolfgang,
>> >
>> > The following changes since commit
>> > 5721385b187b3154c7768e6c182501022f4e2e45:
>> >
>> > ? Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
>> > 07:44:52 +0100)
>> >
>> > are available in the git repository at:
>> >
>> > ? git://git.denx.de/u-boot-arm.git master
>>
>> As with the last pull request, I don't see the Tegra patches in your
>> list here. Is the problem that we don't have our own Tegra maintainer?
>>
>> Please can you suggest what we can do here to get things moving?
>
> CCing Wolfgang.
>
> It'd be good to get a tegra maintainer -- suggestions?
+Mike also who has helped reviewing some of this and might have ideas.
If there is no better candidate I am happy to act as Tegra maintainer
in the meantime (say 3 months) if it will help reduce workload on
Albert. The main thing is to get things moving and I'm happy to help
any way I can. There seems to be an enormous amount of activity in
U-Boot at the moment, which is great, but it does create a load on the
maintainers, particularly Wolfgang and Albert.
Regards,
Simon
>
> M
>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-16 0:04 ` Simon Glass
@ 2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
0 siblings, 1 reply; 261+ messages in thread
From: Marek Vasut @ 2011-11-16 2:27 UTC (permalink / raw)
To: u-boot
> Hi Albert,
>
> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
>
> <albert.u.boot@aribaud.net> wrote:
> > Hi Wolfgang,
> >
> > The following changes since commit
> > 5721385b187b3154c7768e6c182501022f4e2e45:
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> > 07:44:52 +0100)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-arm.git master
>
> As with the last pull request, I don't see the Tegra patches in your
> list here. Is the problem that we don't have our own Tegra maintainer?
>
> Please can you suggest what we can do here to get things moving?
CCing Wolfgang.
It'd be good to get a tegra maintainer -- suggestions?
M
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-15 21:28 Albert ARIBAUD
@ 2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2 siblings, 1 reply; 261+ messages in thread
From: Simon Glass @ 2011-11-16 0:04 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Wolfgang,
>
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> ? Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> 07:44:52 +0100)
>
> are available in the git repository at:
>
> ? git://git.denx.de/u-boot-arm.git master
As with the last pull request, I don't see the Tegra patches in your
list here. Is the problem that we don't have our own Tegra maintainer?
Please can you suggest what we can do here to get things moving?
Regards,
Simon
>
> Alexander Holler (1):
> ? ? ? BeagleBoard: config: Switch to ttyO2
>
> Asen Dimov (1):
> ? ? ? ARM: define CONFIG_MACH_TYPE for all ronetix boards
>
> Christian Riesch (3):
> ? ? ? arm, davinci: Rename AM1808 lowlevel functions to DA850
> ? ? ? arm, davinci: Remove the duplication of LPSC functions
> ? ? ? arm, davinci: Fix setting of the SDRAM configuration register
>
> David M?ller (ELSOFT AG) (2):
> ? ? ? ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
> ? ? ? ARM: remove superfluous setting of arch_number in board specific
> code.
>
> Fabio Estevam (5):
> ? ? ? qong: Use generic function for configuring GPR register
> ? ? ? mx31: Remove duplicate definition for GPR register
> ? ? ? mx31: Use proper IO accessor for GPR register
> ? ? ? mx31: Fix checkpatch warnings in generic.c
> ? ? ? m28evk: Fix comment about the number of RAM banks
>
> Heiko Schocher (3):
> ? ? ? arm, davinci: da850/dm365 lowlevel cleanup
> ? ? ? arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
> ? ? ? arm, davinci: add DAVINCI_MMC_CLKID
>
> Linus Walleij (7):
> ? ? ? integrator: do not test first part of the memory
> ? ? ? integrator: pass configs for core modules
> ? ? ? integrator: move text offset to config
> ? ? ? integrator: use io-accessors for board init
> ? ? ? integrator: make flash writeable on boot
> ? ? ? integrator: add system controller header
> ? ? ? integrator: enable Vpp and disable flash protection
>
> Manjunath Hadli (2):
> ? ? ? dm646x: add new configuration for dm6467T
> ? ? ? dm646x: pass board revision info to kernel
>
> Marek Vasut (27):
> ? ? ? SPL: Allow ARM926EJS to avoid compiling in the CPU support code
> ? ? ? iMX28: Initial support for iMX28 CPU
> ? ? ? iMX28: Add SSP MMC driver
> ? ? ? FEC: Add support for iMX28 quirks
> ? ? ? iMX28: Add PINMUX control
> ? ? ? iMX28: Add I2C bus driver
> ? ? ? iMX28: Add GPIO control
> ? ? ? iMX28: Add SPI driver
> ? ? ? iMX28: Add APBH DMA driver
> ? ? ? iMX28: Add GPMI NAND driver
> ? ? ? iMX28: Add driver for internal RTC
> ? ? ? iMX28: Add image header generator tool
> ? ? ? iMX28: Add u-boot.sb target to Makefile
> ? ? ? iMX28: Add support for DENX M28EVK board
> ? ? ? M28: Add MMC SPL
> ? ? ? M28: Add doc/README.m28 documentation
> ? ? ? iMX28: Fix ARM vector handling
> ? ? ? M28: Add memory detection into SPL
> ? ? ? iMX28: Add USB and USB PHY register definitions
> ? ? ? iMX28: Add USB HOST driver
> ? ? ? M28EVK: Enable USB HOST support
> ? ? ? PXA: Drop csb226 and innokom boards (unmaintained)
> ? ? ? PXA: Cleanup serial_pxa
> ? ? ? PXA: vpac270: Enable the new generic MMC driver
> ? ? ? OneNAND: Add simple OneNAND SPL
> ? ? ? GCC4.6: Fix common/usb.c on xscale
> ? ? ? GCC4.6: Squash warnings in onenand_base.c
>
> Nagabhushana Netagunte (1):
> ? ? ? da850: add new config file for AM18xx
>
> Po-Yu Chuang (1):
> ? ? ? arm: a320: fix broken timer
>
> Prabhakar Lad (1):
> ? ? ? da8xxevm: fix build error
>
> Sricharan (7):
> ? ? ? omap4: make omap4 code common for future reuse
> ? ? ? omap: Checkpatch fixes
> ? ? ? omap5: Add minimal support for omap5430.
> ? ? ? omap5: clocks: Add clocks support for omap5 platform.
> ? ? ? omap5: emif: Add emif/ddr configurations required for omap5 evm
> ? ? ? omap4/5: Add support for booting with CH.
> ? ? ? omap5: Add omap5_evm board build support.
>
> Stefano Babic (1):
> ? ? ? MX25: zmx25: GCC4.6 fix build warnings
>
> Tom Rini (2):
> ? ? ? devkit8000: Fix NAND SPL on boards with 256MB NAND
> ? ? ? OMAP3: Change omap3_evm maintainer
>
> ?.gitignore ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 15 +-
> ?Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 14 +-
> ?README ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?6 +
> ?arch/arm/cpu/arm1136/mx31/generic.c ? ? ? ? ? ? ? ?| ? 11 +-
> ?arch/arm/cpu/arm920t/a320/timer.c ? ? ? ? ? ? ? ? ?| ?134 +--
> ?arch/arm/cpu/arm926ejs/Makefile ? ? ? ? ? ? ? ? ? ?| ? ?6 +
> ?arch/arm/cpu/arm926ejs/davinci/Makefile ? ? ? ? ? ?| ? ?2 +-
> ?arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c ? | ?428 -------
> ?arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c ? ?| ?311 +++++
> ?arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c ? ?| ? 73 +-
> ?.../arm/cpu/arm926ejs/mx28}/Makefile ? ? ? ? ? ? ? | ? 11 +-
> ?arch/arm/cpu/arm926ejs/mx28/clock.c ? ? ? ? ? ? ? ?| ?355 ++++++
> ?arch/arm/cpu/arm926ejs/mx28/iomux.c ? ? ? ? ? ? ? ?| ?109 ++
> ?arch/arm/cpu/arm926ejs/mx28/mx28.c ? ? ? ? ? ? ? ? | ?221 ++++
> ?arch/arm/cpu/arm926ejs/mx28/timer.c ? ? ? ? ? ? ? ?| ?141 +++
> ?arch/arm/cpu/armv7/omap-common/Makefile ? ? ? ? ? ?| ? 13 +
> ?arch/arm/cpu/armv7/omap-common/clocks-common.c ? ? | ?609 ++++++++++
> ?arch/arm/cpu/armv7/omap-common/emif-common.c ? ? ? | 1140
> +++++++++++++++++
> ?arch/arm/cpu/armv7/omap-common/hwinit-common.c ? ? | ?267 ++++
> ?.../armv7/{omap4 => omap-common}/lowlevel_init.S ? | ? 37 +-
> ?.../{omap4/mem.c => omap-common/mem-common.c} ? ? ?| ? ?0
> ?arch/arm/cpu/armv7/omap-common/spl.c ? ? ? ? ? ? ? | ? ?9 +-
> ?arch/arm/cpu/armv7/omap4/Makefile ? ? ? ? ? ? ? ? ?| ? 11 +-
> ?arch/arm/cpu/armv7/omap4/board.c ? ? ? ? ? ? ? ? ? | ?384 ------
> ?arch/arm/cpu/armv7/omap4/clocks.c ? ? ? ? ? ? ? ? ?| ?628 ++--------
> ?arch/arm/cpu/armv7/omap4/emif.c ? ? ? ? ? ? ? ? ? ?| 1135
> +-----------------
> ?arch/arm/cpu/armv7/omap4/hwinit.c ? ? ? ? ? ? ? ? ?| ?167 +++
> ?arch/arm/cpu/armv7/omap4/omap4_mux_data.h ? ? ? ? ?| ? 83 --
> ?arch/arm/cpu/armv7/omap4/sdram_elpida.c ? ? ? ? ? ?| ? ?2 +-
> ?arch/arm/cpu/armv7/omap5/Makefile ? ? ? ? ? ? ? ? ?| ? 48 +
> ?arch/arm/cpu/armv7/omap5/clocks.c ? ? ? ? ? ? ? ? ?| ?432 +++++++
> ?arch/arm/cpu/armv7/omap5/config.mk ? ? ? ? ? ? ? ? | ? 28 +
> ?arch/arm/cpu/armv7/omap5/emif.c ? ? ? ? ? ? ? ? ? ?| ?105 ++
> ?arch/arm/cpu/armv7/omap5/hwinit.c ? ? ? ? ? ? ? ? ?| ? 78 ++
> ?arch/arm/cpu/armv7/omap5/sdram_elpida.c ? ? ? ? ? ?| ?178 +++
> ?arch/arm/include/asm/arch-davinci/aintc_defs.h ? ? | ? ?2 +
> ?.../{am1808_lowlevel.h => da850_lowlevel.h} ? ? ? ?| ? 26 +-
> ?arch/arm/include/asm/arch-davinci/ddr2_defs.h ? ? ?| ? ?4 +
> ?arch/arm/include/asm/arch-davinci/emif_defs.h ? ? ?| ? ?1 +
> ?arch/arm/include/asm/arch-davinci/hardware.h ? ? ? | ? 22 +
> ?arch/arm/include/asm/arch-davinci/pll_defs.h ? ? ? | ? 14 +
> ?arch/arm/include/asm/arch-mx28/clock.h ? ? ? ? ? ? | ? 61 +
> ?arch/arm/include/asm/arch-mx28/dma.h ? ? ? ? ? ? ? | ?170 +++
> ?arch/arm/include/asm/arch-mx28/gpio.h ? ? ? ? ? ? ?| ? 32 +
> ?arch/arm/include/asm/arch-mx28/imx-regs.h ? ? ? ? ?| ? 39 +
> ?arch/arm/include/asm/arch-mx28/iomux-mx28.h ? ? ? ?| ?537 ++++++++
> ?arch/arm/include/asm/arch-mx28/iomux.h ? ? ? ? ? ? | ?168 +++
> ?arch/arm/include/asm/arch-mx28/regs-apbh.h ? ? ? ? | ?466 +++++++
> ?arch/arm/include/asm/arch-mx28/regs-base.h ? ? ? ? | ? 88 ++
> ?arch/arm/include/asm/arch-mx28/regs-bch.h ? ? ? ? ?| ?230 ++++
> ?arch/arm/include/asm/arch-mx28/regs-clkctrl.h ? ? ?| ?312 +++++
> ?arch/arm/include/asm/arch-mx28/regs-common.h ? ? ? | ? 66 +
> ?arch/arm/include/asm/arch-mx28/regs-gpmi.h ? ? ? ? | ?222 ++++
> ?arch/arm/include/asm/arch-mx28/regs-i2c.h ? ? ? ? ?| ?207 ++++
> ?arch/arm/include/asm/arch-mx28/regs-ocotp.h ? ? ? ?| ?173 +++
> ?arch/arm/include/asm/arch-mx28/regs-pinctrl.h ? ? ?| 1284
> ++++++++++++++++++++
> ?arch/arm/include/asm/arch-mx28/regs-power.h ? ? ? ?| ?413 +++++++
> ?arch/arm/include/asm/arch-mx28/regs-rtc.h ? ? ? ? ?| ?147 +++
> ?arch/arm/include/asm/arch-mx28/regs-ssp.h ? ? ? ? ?| ?349 ++++++
> ?arch/arm/include/asm/arch-mx28/regs-timrot.h ? ? ? | ?171 +++
> ?arch/arm/include/asm/arch-mx28/regs-usb.h ? ? ? ? ?| ?178 +++
> ?arch/arm/include/asm/arch-mx28/regs-usbphy.h ? ? ? | ?151 +++
> ?arch/arm/include/asm/arch-mx28/sys_proto.h ? ? ? ? | ? 32 +
> ?arch/arm/include/asm/arch-mx31/imx-regs.h ? ? ? ? ?| ? ?7 +-
> ?arch/arm/include/asm/arch-omap3/mmc_host_def.h ? ? | ? 11 +-
> ?arch/arm/include/asm/arch-omap4/clocks.h ? ? ? ? ? | ? 23 +
> ?arch/arm/include/asm/arch-omap4/emif.h ? ? ? ? ? ? | 1021 ----------------
> ?arch/arm/include/asm/arch-omap4/mmc_host_def.h ? ? | ? 11 +-
> ?.../arm/include/asm/arch-omap4/{omap4.h => omap.h} | ? 46 +-
> ?arch/arm/include/asm/arch-omap4/sys_proto.h ? ? ? ?| ? 38 +-
> ?arch/arm/include/asm/arch-omap5/clocks.h ? ? ? ? ? | ?722 +++++++++++
> ?arch/arm/include/asm/arch-omap5/cpu.h ? ? ? ? ? ? ?| ?175 +++
> ?arch/arm/include/asm/arch-omap5/gpio.h ? ? ? ? ? ? | ? 50 +
> ?arch/arm/include/asm/arch-omap5/i2c.h ? ? ? ? ? ? ?| ? 74 ++
> ?arch/arm/include/asm/arch-omap5/mmc_host_def.h ? ? | ?174 +++
> ?arch/arm/include/asm/arch-omap5/mux_omap5.h ? ? ? ?| ?344 ++++++
> ?arch/arm/include/asm/arch-omap5/omap.h ? ? ? ? ? ? | ?223 ++++
> ?arch/arm/include/asm/arch-omap5/sys_proto.h ? ? ? ?| ?122 ++
> ?arch/arm/include/asm/arch-pxa/pxa-regs.h ? ? ? ? ? | ?111 --
> ?arch/arm/include/asm/arch-pxa/regs-uart.h ? ? ? ? ?| ?109 ++
> ?arch/arm/include/asm/armv7.h ? ? ? ? ? ? ? ? ? ? ? | ? ?3 +
> ?arch/arm/include/asm/emif.h ? ? ? ? ? ? ? ? ? ? ? ?| 1035 ++++++++++++++++
> ?arch/arm/include/asm/mach-types.h ? ? ? ? ? ? ? ? ?| ? 13 +
> ?arch/arm/include/asm/omap_common.h ? ? ? ? ? ? ? ? | ? 31 +-
> ?board/armltd/integrator/arm-ebi.h ? ? ? ? ? ? ? ? ?| ? 62 +
> ?board/armltd/integrator/config.mk ? ? ? ? ? ? ? ? ?| ? ?5 -
> ?board/armltd/integrator/integrator-sc.h ? ? ? ? ? ?| ? 91 ++
> ?board/armltd/integrator/integrator.c ? ? ? ? ? ? ? | ? 63 +-
> ?board/csb226/csb226.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?166 ---
> ?board/csb226/flash.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ?368 ------
> ?board/davedenx/qong/qong.c ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 +-
> ?board/davinci/dm6467evm/dm6467evm.c ? ? ? ? ? ? ? ?| ? 20 +
> ?board/denx/m28evk/Makefile ? ? ? ? ? ? ? ? ? ? ? ? | ? 56 +
> ?.../sys_info.c => board/denx/m28evk/m28_init.h ? ? | ? 48 +-
> ?board/denx/m28evk/m28evk.c ? ? ? ? ? ? ? ? ? ? ? ? | ?216 ++++
> ?board/denx/m28evk/mem_init.c ? ? ? ? ? ? ? ? ? ? ? | ?240 ++++
> ?board/denx/m28evk/mmc_boot.c ? ? ? ? ? ? ? ? ? ? ? | ?273 +++++
> ?board/denx/m28evk/power_init.c ? ? ? ? ? ? ? ? ? ? | ?913 ++++++++++++++
> ?board/denx/m28evk/start.S ? ? ? ? ? ? ? ? ? ? ? ? ?| ?234 ++++
> ?board/denx/m28evk/u-boot-spl.lds ? ? ? ? ? ? ? ? ? | ? 87 ++
> ?board/denx/m28evk/u-boot.bd ? ? ? ? ? ? ? ? ? ? ? ?| ? 14 +
> ?board/innokom/flash.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?421 -------
> ?board/innokom/innokom.c ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?190 ---
> ?board/mpl/vcma9/vcma9.c ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?3 -
> ?board/ronetix/pm9261/pm9261.c ? ? ? ? ? ? ? ? ? ? ?| ? ?3 -
> ?board/ronetix/pm9263/pm9263.c ? ? ? ? ? ? ? ? ? ? ?| ? ?3 -
> ?board/ronetix/pm9g45/pm9g45.c ? ? ? ? ? ? ? ? ? ? ?| ? ?2 -
> ?board/syteco/zmx25/zmx25.c ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 -
> ?board/{innokom => ti/omap5_evm}/Makefile ? ? ? ? ? | ? 12 +-
> ?board/ti/omap5_evm/evm.c ? ? ? ? ? ? ? ? ? ? ? ? ? | ?101 ++
> ?board/ti/omap5_evm/mux_data.h ? ? ? ? ? ? ? ? ? ? ?| ?275 +++++
> ?board/ti/panda/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?2 -
> ?board/ti/panda/panda.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 27 +-
> ?board/ti/panda/panda_mux_data.h ? ? ? ? ? ? ? ? ? ?| ? 54 +-
> ?board/ti/sdp4430/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +-
> ?board/ti/sdp4430/sdp.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 27 +-
> ?board/ti/sdp4430/sdp4430_mux_data.h ? ? ? ? ? ? ? ?| ? 53 +-
> ?board/vpac270/vpac270.c ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?9 +
> ?boards.cfg ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 22 +-
> ?common/usb.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 13 +-
> ?doc/README.m28 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ?223 ++++
> ?drivers/dma/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?drivers/dma/apbh_dma.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ?691 +++++++++++
> ?drivers/gpio/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> ?drivers/gpio/mxs_gpio.c ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?136 ++
> ?drivers/i2c/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?drivers/i2c/mxs_i2c.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?246 ++++
> ?drivers/mmc/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?drivers/mmc/mxsmmc.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ?351 ++++++
> ?drivers/mmc/omap_hsmmc.c ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 26 +-
> ?drivers/mtd/nand/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> ?drivers/mtd/nand/mxs_nand.c ? ? ? ? ? ? ? ? ? ? ? ?| 1118
> +++++++++++++++++
> ?drivers/mtd/onenand/Makefile ? ? ? ? ? ? ? ? ? ? ? | ? ?4 +
> ?drivers/mtd/onenand/onenand_base.c ? ? ? ? ? ? ? ? | ? 18 +-
> ?drivers/mtd/onenand/onenand_spl.c ? ? ? ? ? ? ? ? ?| ?146 +++
> ?drivers/net/davinci_emac.c ? ? ? ? ? ? ? ? ? ? ? ? | ? 24 +-
> ?drivers/net/fec_mxc.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? 44 +-
> ?drivers/rtc/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?drivers/rtc/mxsrtc.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 86 ++
> ?drivers/serial/serial_pxa.c ? ? ? ? ? ? ? ? ? ? ? ?| ?464 +++-----
> ?drivers/spi/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?drivers/spi/mxs_spi.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?186 +++
> ?drivers/usb/host/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
> ?drivers/usb/host/ehci-mxs.c ? ? ? ? ? ? ? ? ? ? ? ?| ?154 +++
> ?include/configs/VCMA9.h ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +
> ?include/configs/csb226.h ? ? ? ? ? ? ? ? ? ? ? ? ? | ?506 --------
> ?include/configs/da850_am18xxevm.h ? ? ? ? ? ? ? ? ?| ?245 ++++
> ?include/configs/davinci_dm6467Tevm.h ? ? ? ? ? ? ? | ?163 +++
> ?include/configs/davinci_dm6467evm.h ? ? ? ? ? ? ? ?| ? ?1 +
> ?include/configs/devkit8000.h ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?include/configs/innokom.h ? ? ? ? ? ? ? ? ? ? ? ? ?| ?507 --------
> ?include/configs/integratorap.h ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?include/configs/integratorcp.h ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?include/configs/m28evk.h ? ? ? ? ? ? ? ? ? ? ? ? ? | ?303 +++++
> ?include/configs/omap3_beagle.h ? ? ? ? ? ? ? ? ? ? | ? ?2 +-
> ?include/configs/omap4_common.h ? ? ? ? ? ? ? ? ? ? | ? ?7 +-
> ?include/configs/omap5_evm.h ? ? ? ? ? ? ? ? ? ? ? ?| ?284 +++++
> ?include/configs/pm9261.h ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?3 +
> ?include/configs/pm9263.h ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?3 +
> ?include/configs/pm9g45.h ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?3 +
> ?include/configs/vpac270.h ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?3 +-
> ?include/onenand_uboot.h ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?3 +
> ?spl/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?4 +
> ?tools/.gitignore ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?tools/Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?6 +
> ?tools/mxsboot.c ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ?684 +++++++++++
> ?167 files changed, 21354 insertions(+), 6487 deletions(-)
> ?delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
> ?create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
> ?rename {board/csb226 => arch/arm/cpu/arm926ejs/mx28}/Makefile (86%)
> ?create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> ?create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
> ?create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> ?create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> ?create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c
> ?create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c
> ?create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c
> ?rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%)
> ?rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%)
> ?delete mode 100644 arch/arm/cpu/armv7/omap4/board.c
> ?create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c
> ?delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
> ?create mode 100644 arch/arm/cpu/armv7/omap5/Makefile
> ?create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
> ?create mode 100644 arch/arm/cpu/armv7/omap5/config.mk
> ?create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
> ?create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c
> ?create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
> ?rename arch/arm/include/asm/arch-davinci/{am1808_lowlevel.h =>
> da850_lowlevel.h} (63%)
> ?create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
> ?create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
> ?delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
> ?rename arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%)
> ?create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/omap.h
> ?create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h
> ?create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
> ?create mode 100644 arch/arm/include/asm/emif.h
> ?create mode 100644 board/armltd/integrator/arm-ebi.h
> ?delete mode 100644 board/armltd/integrator/config.mk
> ?create mode 100644 board/armltd/integrator/integrator-sc.h
> ?delete mode 100644 board/csb226/csb226.c
> ?delete mode 100644 board/csb226/flash.c
> ?create mode 100644 board/denx/m28evk/Makefile
> ?rename arch/arm/cpu/armv7/omap4/sys_info.c =>
> board/denx/m28evk/m28_init.h (53%)
> ?create mode 100644 board/denx/m28evk/m28evk.c
> ?create mode 100644 board/denx/m28evk/mem_init.c
> ?create mode 100644 board/denx/m28evk/mmc_boot.c
> ?create mode 100644 board/denx/m28evk/power_init.c
> ?create mode 100644 board/denx/m28evk/start.S
> ?create mode 100644 board/denx/m28evk/u-boot-spl.lds
> ?create mode 100644 board/denx/m28evk/u-boot.bd
> ?delete mode 100644 board/innokom/flash.c
> ?delete mode 100644 board/innokom/innokom.c
> ?rename board/{innokom => ti/omap5_evm}/Makefile (86%)
> ?create mode 100644 board/ti/omap5_evm/evm.c
> ?create mode 100644 board/ti/omap5_evm/mux_data.h
> ?create mode 100644 doc/README.m28
> ?create mode 100644 drivers/dma/apbh_dma.c
> ?create mode 100644 drivers/gpio/mxs_gpio.c
> ?create mode 100644 drivers/i2c/mxs_i2c.c
> ?create mode 100644 drivers/mmc/mxsmmc.c
> ?create mode 100644 drivers/mtd/nand/mxs_nand.c
> ?create mode 100644 drivers/mtd/onenand/onenand_spl.c
> ?create mode 100644 drivers/rtc/mxsrtc.c
> ?create mode 100644 drivers/spi/mxs_spi.c
> ?create mode 100644 drivers/usb/host/ehci-mxs.c
> ?delete mode 100644 include/configs/csb226.h
> ?create mode 100644 include/configs/da850_am18xxevm.h
> ?create mode 100644 include/configs/davinci_dm6467Tevm.h
> ?delete mode 100644 include/configs/innokom.h
> ?create mode 100644 include/configs/m28evk.h
> ?create mode 100644 include/configs/omap5_evm.h
> ?create mode 100644 tools/mxsboot.c
>
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
` (2 more replies)
0 siblings, 3 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-11-15 21:28 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
07:44:52 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Alexander Holler (1):
BeagleBoard: config: Switch to ttyO2
Asen Dimov (1):
ARM: define CONFIG_MACH_TYPE for all ronetix boards
Christian Riesch (3):
arm, davinci: Rename AM1808 lowlevel functions to DA850
arm, davinci: Remove the duplication of LPSC functions
arm, davinci: Fix setting of the SDRAM configuration register
David M?ller (ELSOFT AG) (2):
ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
ARM: remove superfluous setting of arch_number in board specific
code.
Fabio Estevam (5):
qong: Use generic function for configuring GPR register
mx31: Remove duplicate definition for GPR register
mx31: Use proper IO accessor for GPR register
mx31: Fix checkpatch warnings in generic.c
m28evk: Fix comment about the number of RAM banks
Heiko Schocher (3):
arm, davinci: da850/dm365 lowlevel cleanup
arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
arm, davinci: add DAVINCI_MMC_CLKID
Linus Walleij (7):
integrator: do not test first part of the memory
integrator: pass configs for core modules
integrator: move text offset to config
integrator: use io-accessors for board init
integrator: make flash writeable on boot
integrator: add system controller header
integrator: enable Vpp and disable flash protection
Manjunath Hadli (2):
dm646x: add new configuration for dm6467T
dm646x: pass board revision info to kernel
Marek Vasut (27):
SPL: Allow ARM926EJS to avoid compiling in the CPU support code
iMX28: Initial support for iMX28 CPU
iMX28: Add SSP MMC driver
FEC: Add support for iMX28 quirks
iMX28: Add PINMUX control
iMX28: Add I2C bus driver
iMX28: Add GPIO control
iMX28: Add SPI driver
iMX28: Add APBH DMA driver
iMX28: Add GPMI NAND driver
iMX28: Add driver for internal RTC
iMX28: Add image header generator tool
iMX28: Add u-boot.sb target to Makefile
iMX28: Add support for DENX M28EVK board
M28: Add MMC SPL
M28: Add doc/README.m28 documentation
iMX28: Fix ARM vector handling
M28: Add memory detection into SPL
iMX28: Add USB and USB PHY register definitions
iMX28: Add USB HOST driver
M28EVK: Enable USB HOST support
PXA: Drop csb226 and innokom boards (unmaintained)
PXA: Cleanup serial_pxa
PXA: vpac270: Enable the new generic MMC driver
OneNAND: Add simple OneNAND SPL
GCC4.6: Fix common/usb.c on xscale
GCC4.6: Squash warnings in onenand_base.c
Nagabhushana Netagunte (1):
da850: add new config file for AM18xx
Po-Yu Chuang (1):
arm: a320: fix broken timer
Prabhakar Lad (1):
da8xxevm: fix build error
Sricharan (7):
omap4: make omap4 code common for future reuse
omap: Checkpatch fixes
omap5: Add minimal support for omap5430.
omap5: clocks: Add clocks support for omap5 platform.
omap5: emif: Add emif/ddr configurations required for omap5 evm
omap4/5: Add support for booting with CH.
omap5: Add omap5_evm board build support.
Stefano Babic (1):
MX25: zmx25: GCC4.6 fix build warnings
Tom Rini (2):
devkit8000: Fix NAND SPL on boards with 256MB NAND
OMAP3: Change omap3_evm maintainer
.gitignore | 1 +
MAINTAINERS | 15 +-
Makefile | 14 +-
README | 6 +
arch/arm/cpu/arm1136/mx31/generic.c | 11 +-
arch/arm/cpu/arm920t/a320/timer.c | 134 +--
arch/arm/cpu/arm926ejs/Makefile | 6 +
arch/arm/cpu/arm926ejs/davinci/Makefile | 2 +-
arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 -------
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 311 +++++
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 73 +-
.../arm/cpu/arm926ejs/mx28}/Makefile | 11 +-
arch/arm/cpu/arm926ejs/mx28/clock.c | 355 ++++++
arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 ++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 ++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
arch/arm/cpu/armv7/omap-common/Makefile | 13 +
arch/arm/cpu/armv7/omap-common/clocks-common.c | 609 ++++++++++
arch/arm/cpu/armv7/omap-common/emif-common.c | 1140
+++++++++++++++++
arch/arm/cpu/armv7/omap-common/hwinit-common.c | 267 ++++
.../armv7/{omap4 => omap-common}/lowlevel_init.S | 37 +-
.../{omap4/mem.c => omap-common/mem-common.c} | 0
arch/arm/cpu/armv7/omap-common/spl.c | 9 +-
arch/arm/cpu/armv7/omap4/Makefile | 11 +-
arch/arm/cpu/armv7/omap4/board.c | 384 ------
arch/arm/cpu/armv7/omap4/clocks.c | 628 ++--------
arch/arm/cpu/armv7/omap4/emif.c | 1135
+-----------------
arch/arm/cpu/armv7/omap4/hwinit.c | 167 +++
arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 83 --
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 2 +-
arch/arm/cpu/armv7/omap5/Makefile | 48 +
arch/arm/cpu/armv7/omap5/clocks.c | 432 +++++++
arch/arm/cpu/armv7/omap5/config.mk | 28 +
arch/arm/cpu/armv7/omap5/emif.c | 105 ++
arch/arm/cpu/armv7/omap5/hwinit.c | 78 ++
arch/arm/cpu/armv7/omap5/sdram_elpida.c | 178 +++
arch/arm/include/asm/arch-davinci/aintc_defs.h | 2 +
.../{am1808_lowlevel.h => da850_lowlevel.h} | 26 +-
arch/arm/include/asm/arch-davinci/ddr2_defs.h | 4 +
arch/arm/include/asm/arch-davinci/emif_defs.h | 1 +
arch/arm/include/asm/arch-davinci/hardware.h | 22 +
arch/arm/include/asm/arch-davinci/pll_defs.h | 14 +
arch/arm/include/asm/arch-mx28/clock.h | 61 +
arch/arm/include/asm/arch-mx28/dma.h | 170 +++
arch/arm/include/asm/arch-mx28/gpio.h | 32 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 39 +
arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 ++++++++
arch/arm/include/asm/arch-mx28/iomux.h | 168 +++
arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
arch/arm/include/asm/arch-mx28/regs-bch.h | 230 ++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 +++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 +
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 ++++
arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 +++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284
++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-power.h | 413 +++++++
arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 ++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 +++
arch/arm/include/asm/arch-mx28/regs-usb.h | 178 +++
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++
arch/arm/include/asm/arch-mx28/sys_proto.h | 32 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +-
arch/arm/include/asm/arch-omap3/mmc_host_def.h | 11 +-
arch/arm/include/asm/arch-omap4/clocks.h | 23 +
arch/arm/include/asm/arch-omap4/emif.h | 1021 ----------------
arch/arm/include/asm/arch-omap4/mmc_host_def.h | 11 +-
.../arm/include/asm/arch-omap4/{omap4.h => omap.h} | 46 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 38 +-
arch/arm/include/asm/arch-omap5/clocks.h | 722 +++++++++++
arch/arm/include/asm/arch-omap5/cpu.h | 175 +++
arch/arm/include/asm/arch-omap5/gpio.h | 50 +
arch/arm/include/asm/arch-omap5/i2c.h | 74 ++
arch/arm/include/asm/arch-omap5/mmc_host_def.h | 174 +++
arch/arm/include/asm/arch-omap5/mux_omap5.h | 344 ++++++
arch/arm/include/asm/arch-omap5/omap.h | 223 ++++
arch/arm/include/asm/arch-omap5/sys_proto.h | 122 ++
arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 --
arch/arm/include/asm/arch-pxa/regs-uart.h | 109 ++
arch/arm/include/asm/armv7.h | 3 +
arch/arm/include/asm/emif.h | 1035 ++++++++++++++++
arch/arm/include/asm/mach-types.h | 13 +
arch/arm/include/asm/omap_common.h | 31 +-
board/armltd/integrator/arm-ebi.h | 62 +
board/armltd/integrator/config.mk | 5 -
board/armltd/integrator/integrator-sc.h | 91 ++
board/armltd/integrator/integrator.c | 63 +-
board/csb226/csb226.c | 166 ---
board/csb226/flash.c | 368 ------
board/davedenx/qong/qong.c | 2 +-
board/davinci/dm6467evm/dm6467evm.c | 20 +
board/denx/m28evk/Makefile | 56 +
.../sys_info.c => board/denx/m28evk/m28_init.h | 48 +-
board/denx/m28evk/m28evk.c | 216 ++++
board/denx/m28evk/mem_init.c | 240 ++++
board/denx/m28evk/mmc_boot.c | 273 +++++
board/denx/m28evk/power_init.c | 913 ++++++++++++++
board/denx/m28evk/start.S | 234 ++++
board/denx/m28evk/u-boot-spl.lds | 87 ++
board/denx/m28evk/u-boot.bd | 14 +
board/innokom/flash.c | 421 -------
board/innokom/innokom.c | 190 ---
board/mpl/vcma9/vcma9.c | 3 -
board/ronetix/pm9261/pm9261.c | 3 -
board/ronetix/pm9263/pm9263.c | 3 -
board/ronetix/pm9g45/pm9g45.c | 2 -
board/syteco/zmx25/zmx25.c | 2 -
board/{innokom => ti/omap5_evm}/Makefile | 12 +-
board/ti/omap5_evm/evm.c | 101 ++
board/ti/omap5_evm/mux_data.h | 275 +++++
board/ti/panda/Makefile | 2 -
board/ti/panda/panda.c | 27 +-
board/ti/panda/panda_mux_data.h | 54 +-
board/ti/sdp4430/Makefile | 4 +-
board/ti/sdp4430/sdp.c | 27 +-
board/ti/sdp4430/sdp4430_mux_data.h | 53 +-
board/vpac270/vpac270.c | 9 +
boards.cfg | 22 +-
common/usb.c | 13 +-
doc/README.m28 | 223 ++++
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 691 +++++++++++
drivers/gpio/Makefile | 1 +
drivers/gpio/mxs_gpio.c | 136 ++
drivers/i2c/Makefile | 1 +
drivers/i2c/mxs_i2c.c | 246 ++++
drivers/mmc/Makefile | 1 +
drivers/mmc/mxsmmc.c | 351 ++++++
drivers/mmc/omap_hsmmc.c | 26 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 1118
+++++++++++++++++
drivers/mtd/onenand/Makefile | 4 +
drivers/mtd/onenand/onenand_base.c | 18 +-
drivers/mtd/onenand/onenand_spl.c | 146 +++
drivers/net/davinci_emac.c | 24 +-
drivers/net/fec_mxc.c | 44 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/mxsrtc.c | 86 ++
drivers/serial/serial_pxa.c | 464 +++-----
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 186 +++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mxs.c | 154 +++
include/configs/VCMA9.h | 4 +
include/configs/csb226.h | 506 --------
include/configs/da850_am18xxevm.h | 245 ++++
include/configs/davinci_dm6467Tevm.h | 163 +++
include/configs/davinci_dm6467evm.h | 1 +
include/configs/devkit8000.h | 1 +
include/configs/innokom.h | 507 --------
include/configs/integratorap.h | 1 +
include/configs/integratorcp.h | 1 +
include/configs/m28evk.h | 303 +++++
include/configs/omap3_beagle.h | 2 +-
include/configs/omap4_common.h | 7 +-
include/configs/omap5_evm.h | 284 +++++
include/configs/pm9261.h | 3 +
include/configs/pm9263.h | 3 +
include/configs/pm9g45.h | 3 +
include/configs/vpac270.h | 3 +-
include/onenand_uboot.h | 3 +
spl/Makefile | 4 +
tools/.gitignore | 1 +
tools/Makefile | 6 +
tools/mxsboot.c | 684 +++++++++++
167 files changed, 21354 insertions(+), 6487 deletions(-)
delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
rename {board/csb226 => arch/arm/cpu/arm926ejs/mx28}/Makefile (86%)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c
create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c
create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c
rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%)
rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%)
delete mode 100644 arch/arm/cpu/armv7/omap4/board.c
create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c
delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
create mode 100644 arch/arm/cpu/armv7/omap5/Makefile
create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
create mode 100644 arch/arm/cpu/armv7/omap5/config.mk
create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c
create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
rename arch/arm/include/asm/arch-davinci/{am1808_lowlevel.h =>
da850_lowlevel.h} (63%)
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
rename arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%)
create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h
create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h
create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h
create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h
create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h
create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h
create mode 100644 arch/arm/include/asm/arch-omap5/omap.h
create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h
create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
create mode 100644 arch/arm/include/asm/emif.h
create mode 100644 board/armltd/integrator/arm-ebi.h
delete mode 100644 board/armltd/integrator/config.mk
create mode 100644 board/armltd/integrator/integrator-sc.h
delete mode 100644 board/csb226/csb226.c
delete mode 100644 board/csb226/flash.c
create mode 100644 board/denx/m28evk/Makefile
rename arch/arm/cpu/armv7/omap4/sys_info.c =>
board/denx/m28evk/m28_init.h (53%)
create mode 100644 board/denx/m28evk/m28evk.c
create mode 100644 board/denx/m28evk/mem_init.c
create mode 100644 board/denx/m28evk/mmc_boot.c
create mode 100644 board/denx/m28evk/power_init.c
create mode 100644 board/denx/m28evk/start.S
create mode 100644 board/denx/m28evk/u-boot-spl.lds
create mode 100644 board/denx/m28evk/u-boot.bd
delete mode 100644 board/innokom/flash.c
delete mode 100644 board/innokom/innokom.c
rename board/{innokom => ti/omap5_evm}/Makefile (86%)
create mode 100644 board/ti/omap5_evm/evm.c
create mode 100644 board/ti/omap5_evm/mux_data.h
create mode 100644 doc/README.m28
create mode 100644 drivers/dma/apbh_dma.c
create mode 100644 drivers/gpio/mxs_gpio.c
create mode 100644 drivers/i2c/mxs_i2c.c
create mode 100644 drivers/mmc/mxsmmc.c
create mode 100644 drivers/mtd/nand/mxs_nand.c
create mode 100644 drivers/mtd/onenand/onenand_spl.c
create mode 100644 drivers/rtc/mxsrtc.c
create mode 100644 drivers/spi/mxs_spi.c
create mode 100644 drivers/usb/host/ehci-mxs.c
delete mode 100644 include/configs/csb226.h
create mode 100644 include/configs/da850_am18xxevm.h
create mode 100644 include/configs/davinci_dm6467Tevm.h
delete mode 100644 include/configs/innokom.h
create mode 100644 include/configs/m28evk.h
create mode 100644 include/configs/omap5_evm.h
create mode 100644 tools/mxsboot.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-11-07 20:58 Albert ARIBAUD
@ 2011-11-08 0:02 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-11-08 0:02 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4EB84664.50705@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit fec79acc864bed049b6beae719ccbf2bbec5403a:
>
> sandbox: drop unused return (2011-11-03 22:35:25 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Ajay Bhargav (1):
> gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
>
> Anatolij Gustschin (4):
> ARM: netspace_v2: fix warnings
> ARM: DockStar: fix compilation
> ARM: dreamplug: fix compilation
> imx: imx31_phycore.h: fix checkpatch warnings
>
> Angus Ainslie (2):
> ORIGEN : enable device tree support
> ORIGEN : use absolute paths and fix tool naming
>
> Bastian Ruppert (4):
> Davinci: ea20: set console on UART0
> Davinci: ea20: set GPIOs to hold MII-Phy in reset and set
> UART0-Switch for console
> Davinci: ea20: add gpio for keeping power on in board_late_init
> Davinci: ea20: add gpios for LCD backlight control
>
> Chander Kashyap (4):
> SMDKV310: Initialize board id using CONFIG_MACH_TYPE
> SMDKV310: use get_ram_size() to validate dram size
> smdkv310: use spl framework for mmc spl
> smdkv310: use macro for mmc data read function address
>
> Christian Riesch (1):
> arm, davinci: Add function lpsc_syncreset()
>
> Daniel Gorsulowski (2):
> at91: defined mach-types for meesc board in board config file
> at91: defined mach-types for otc570 board in board config file
>
> Fabio Estevam (22):
> qong: remove unneeded "1" from qong.h
> mx31pdk: Add MC13783 PMIC support
> mx31: Introduce mx31_set_gpr function
> qong: Use mx31_set_gpr to setup USBH2 pins
> qong: remove unneeded IOMUX settings
> rtc: Make mc13783-rtc driver generic
> mx51evk: Add RTC support
> mx51evk: Use GPIO API for configuring the IOMUX
> mx35pdk: Add RTC support
> mx51evk: Remove unneeded '1' from mx51evk.h
> mx51evk: Remove unused get_board_rev function
> vision2: Remove unused header file
> mx53evk: Remove unneeded '1' from mx53evk.h
> mx53loco: Remove unused get_board_rev function
> mx53evk: Add RTC support
> mx53evk: Remove unused get_board_rev function
> mx53ard: Remove unused get_board_rev function
> mx53smd: Remove unused get_board_rev function
> vision2: Remove unused get_board_rev function
> mx53: Turn off child clocks before reconfigure perclk_root
> README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
> mx31pdk: Enable D and I caches
>
> Heiko Schocher (13):
> arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
> arm, arm926: fix missing symbols in NAND_SPL mode
> usb, davinci: add enable_vbus() weak function
> arm, usb, davinci: make USBPHY_CTL register configurable
> net, davinci_emac: make clock divider in MDIO control register
> configurable
> spl: add option for adding post memory test to the SPL framework
> arm, davinci: add support for new spl framework
> spl, nand: add 4bit HW ecc oob first nand_read_page function
> arm, davinci: add header files for dm365
> arm, davinci: add lowlevel function for dm365 soc
> arm926ejs, davinci: add cpuinfo for dm365
> arm926ejs, davinci: add missing spi defines for dm365
> arm, davinci: add cam_enc_4xx support
>
> Helmut Raiger (4):
> misc: pmic: fix regression in pmic_fsl.c (SPI)
> mx31: define pins and init for UART2 and CSPI3
> mx31: add ESD control registers
> mx31: Add board support for HALE TT-01
>
> Holger Brunck (6):
> arm/km: add variable waitforne to mgcoge3un
> arm/km/mgcoge3un: enhance "waitforne" feature
> arm/km: add boardid and hwkey to kernel command line
> arm/km: trigger reconfiguration for the Xilinx FPGA
> arm/km: enable jffs2 cmds
> arm/km: adapt bootcounter evaluation
>
> Ilya Yanok (2):
> davinci_emac: compilation fix, phy is array now
> omap/spl: actually enable the console
>
> Jens Scharsig (1):
> Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board
>
> Lei Wen (2):
> pantheon: define CONFIG_SYS_CACHELINE_SIZE
> armada100: define CONFIG_SYS_CACHELINE_SIZE
>
> Luca Ceresoli (1):
> ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE
>
> Marek Vasut (1):
> I2C: Fix mxc_i2c.c problem on imx31_phycore
>
> Matthias Weisser (1):
> arm: jadecpu: Readd MACH_TYPE_JADECPU
>
> Michael Jones (1):
> OMAP3: mvblx: Initial support for mvBlueLYNX-X
>
> Michael Walle (1):
> kirkwood: define CONFIG_SYS_CACHELINE_SIZE
>
> Mike Frysinger (1):
> kirkwood: drop empty asm-offsets.s file
>
> Sanjeev Premi (10):
> omap3evm: Set environment variable 'ethaddr'
> omap3evm: Reorder related config options
> omap3evm: Prepare to split configuration
> omap3evm: move common config options to new file
> omap3evm: Add (quick) configuration for MMC/SD only
> omap3evm: Add (quick) configuration for NAND only
> omap3evm: fix errors caused by multiple definitions
> omap3: mem: Define and use common macros
> omap3: mem: Clean-up whitespaces
> omap3: mem: Move comments next to definitions
>
> Simon Guinot (2):
> netspace_v2: fix SDRAM configuration
> netspace_v2: enable I2C EEPROM support
>
> Stefano Babic (17):
> MX35: added ESDC structure to imx-regs
> MX35: add pins definition for UART3
> MX35: add reset cause as provided by other i.MX
> MX35: factorize common assembly code
> I2C: added I2C-2 and I2C-3 to MX35
> MX35: Drop unnecessary prototypes from imx-regs.h
> MX51: vision2: add MACH_TYPE in config file
> MX35: add support for flea3 board
> MX25: tx25: Fix building due to missing MACH_TYPE
> Davinci: ea20: Add NAND support
> Davinci: ea20: Add early init to get early output from console
> Davinci: ea20: Add default U-Boot environment
> ARM: Davinci: added missing registers to hardware.h
> VIDEO: davinci: add framebuffer to da8xx
> Davinci: ea20: added video support
> Davinci: ea20: added I2C support
> Davinci: ea20: added PREBOOT to configuration
>
> Thomas Herzmann (1):
> arm/km: portl2 environment address update to P1B
>
> Tom Rini (2):
> am335x: Temporarily add MACH_TYPE define
> am335x: Drop board_sysinfo struct
>
> Valentin Longchamp (1):
> ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards
>
> Wolfgang Denk (1):
> qong: enable support for compressed images
>
> Wolfgang Grandegger (2):
> mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
> ehci-mxc: remove incorrect comment
>
> ?ukasz Majewski (3):
> dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target
> dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210
> target
> misc:pmic:samsung Enable PMIC driver at C210 Universal target
>
> MAINTAINERS | 10 +
> Makefile | 8 +-
> README | 9 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 15 +
> arch/arm/cpu/arm1136/mx31/generic.c | 15 +
> arch/arm/cpu/arm1136/mx35/generic.c | 31 +-
> arch/arm/cpu/arm926ejs/davinci/Makefile | 5 +
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 27 +-
> arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 439 ++++++++++
> arch/arm/cpu/arm926ejs/davinci/psc.c | 20 +-
> arch/arm/cpu/arm926ejs/davinci/spl.c | 63 ++
> arch/arm/cpu/arm926ejs/start.S | 31 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 +
> arch/arm/cpu/armv7/omap-common/spl.c | 2 +
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 7 -
> arch/arm/include/asm/arch-armada100/config.h | 2 +
> arch/arm/include/asm/arch-davinci/aintc_defs.h | 50 ++
> arch/arm/include/asm/arch-davinci/da8xx-fb.h | 126 +++
> arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 41 +
> arch/arm/include/asm/arch-davinci/hardware.h | 27 +-
> arch/arm/include/asm/arch-davinci/pll_defs.h | 84 ++
> arch/arm/include/asm/arch-davinci/psc_defs.h | 86 ++
> arch/arm/include/asm/arch-davinci/syscfg_defs.h | 66 ++
> arch/arm/include/asm/arch-kirkwood/config.h | 3 +-
> arch/arm/include/asm/arch-mx31/clock.h | 2 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 67 ++
> arch/arm/include/asm/arch-mx35/imx-regs.h | 34 +-
> arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 140 ++++
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 +
> arch/arm/include/asm/arch-omap3/mem.h | 217 +++---
> arch/arm/include/asm/arch-pantheon/config.h | 2 +
> board/CarMediaLab/flea3/Makefile | 49 ++
> board/CarMediaLab/flea3/flea3.c | 289 +++++++
> board/CarMediaLab/flea3/lowlevel_init.S | 79 ++
> board/LaCie/netspace_v2/kwbimage-is2.cfg | 162 ++++
> board/LaCie/netspace_v2/kwbimage.cfg | 4 +-
> board/LaCie/netspace_v2/netspace_v2.c | 1 +
> board/Marvell/dreamplug/dreamplug.c | 1 +
> board/Seagate/dockstar/dockstar.c | 2 +
> board/ait/cam_enc_4xx/Makefile | 46 ++
> board/ait/cam_enc_4xx/cam_enc_4xx.c | 446 +++++++++++
> board/ait/cam_enc_4xx/config.mk | 15 +
> .../ait/cam_enc_4xx/u-boot-spl.lds | 63 +-
> board/ait/cam_enc_4xx/ublimage.cfg | 48 ++
> board/comelit/dig297/dig297.c | 2 -
> board/davedenx/qong/qong.c | 8 +-
> board/davinci/common/misc.c | 2 +-
> board/davinci/ea20/ea20.c | 205 ++++-
> board/freescale/mx31pdk/mx31pdk.c | 20 +
> board/freescale/mx35pdk/mx35pdk.h | 18 -
> board/freescale/mx51evk/mx51evk.c | 17 +-
> board/freescale/mx53ard/mx53ard.c | 5 -
> board/freescale/mx53evk/mx53evk.c | 5 -
> board/freescale/mx53loco/mx53loco.c | 5 -
> board/freescale/mx53smd/mx53smd.c | 5 -
> board/hale/tt01/Makefile | 51 ++
> board/hale/tt01/lowlevel_init.S | 32 +
> board/hale/tt01/tt01.c | 200 +++++
> board/karo/tx25/tx25.c | 1 -
> board/keymile/km_arm/km_arm.c | 55 +-
> board/matrix_vision/mvblx/Makefile | 53 ++
> board/matrix_vision/mvblx/config.mk | 33 +
> board/matrix_vision/mvblx/fpga.c | 219 +++++
> board/matrix_vision/mvblx/fpga.h | 32 +
> board/matrix_vision/mvblx/mvblx.c | 169 ++++
> board/matrix_vision/mvblx/mvblx.h | 362 +++++++++
> board/matrix_vision/mvblx/sys_eeprom.c | 395 +++++++++
> board/samsung/origen/Makefile | 6 +-
> board/samsung/smdkv310/Makefile | 19 +-
> .../board => board}/samsung/smdkv310/mmc_boot.c | 15 +-
> board/samsung/smdkv310/smdkv310.c | 13 +-
> .../samsung/smdkv310/tools/mkv310_image.c | 0
> board/samsung/universal_c210/universal.c | 5 +
> board/syteco/jadecpu/jadecpu.c | 1 -
> board/ti/evm/evm.c | 15 +
> board/ttcontrol/vision2/vision2.c | 10 -
> boards.cfg | 8 +-
> doc/README.SPL | 2 +
> doc/README.davinci.nand_spl | 141 ++++
> doc/README.omap3 | 5 +
> drivers/i2c/mxc_i2c.c | 41 +-
> drivers/misc/pmic_fsl.c | 5 +-
> drivers/misc/pmic_spi.c | 3 +-
> drivers/mtd/nand/Makefile | 3 +
> drivers/mtd/nand/nand_spl_load.c | 56 ++
> drivers/mtd/nand/nand_spl_simple.c | 43 +-
> drivers/net/davinci_emac.c | 11 +-
> drivers/net/mvgbe.c | 1 +
> drivers/rtc/Makefile | 2 +-
> drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} | 0
> drivers/rtc/mvrtc.c | 1 +
> drivers/usb/host/ehci-mxc.c | 1 -
> drivers/usb/musb/davinci.c | 20 +-
> drivers/video/Makefile | 1 +
> drivers/video/da8xx-fb.c | 846
> ++++++++++++++++++++
> include/configs/am335x_evm.h | 1 +
> include/configs/cam_enc_4xx.h | 453 +++++++++++
> include/configs/dig297.h | 8 +
> include/configs/ea20.h | 126 +++-
> include/configs/eb_cpux9k2.h | 2 +
> include/configs/efikamx.h | 2 +-
> include/configs/flea3.h | 286 +++++++
> include/configs/gplugd.h | 12 +-
> include/configs/imx31_litekit.h | 2 +-
> include/configs/imx31_phycore.h | 153 ++--
> include/configs/jadecpu.h | 4 +
> include/configs/km/km_arm.h | 9 +-
> include/configs/km_kirkwood.h | 3 +
> include/configs/meesc.h | 8 +
> include/configs/mgcoge3un.h | 2 +
> include/configs/mx31ads.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx35pdk.h | 2 +
> include/configs/mx51evk.h | 14 +-
> include/configs/mx53ard.h | 3 +-
> include/configs/mx53evk.h | 19 +-
> include/configs/mx53loco.h | 3 +-
> include/configs/mx53smd.h | 3 +-
> include/configs/netspace_v2.h | 18 +-
> include/configs/omap3_evm.h | 331 ++-------
> include/configs/omap3_evm_common.h | 292 +++++++
> include/configs/omap3_evm_quick_mmc.h | 91 +++
> include/configs/omap3_evm_quick_nand.h | 79 ++
> include/configs/omap3_mvblx.h | 313 ++++++++
> include/configs/origen.h | 3 +
> include/configs/otc570.h | 7 +
> include/configs/portl2.h | 6 +-
> include/configs/qong.h | 41 +-
> include/configs/s5p_goni.h | 2 +
> include/configs/s5pc210_universal.h | 19 +
> include/configs/smdkv310.h | 8 +-
> include/configs/tt01.h | 254 ++++++
> include/configs/tx25.h | 6 +
> include/configs/vision2.h | 6 +-
> mmc_spl/board/samsung/smdkv310/Makefile | 106 ---
> spl/Makefile | 3 +-
> tools/ublimage.h | 2 +-
> 137 files changed, 7876 insertions(+), 850 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c
> delete mode 100644 arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s
> create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h
> create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h
> create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
> create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h
> create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h
> create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h
> create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S
> create mode 100644 board/CarMediaLab/flea3/Makefile
> create mode 100644 board/CarMediaLab/flea3/flea3.c
> create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S
> create mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg
> create mode 100644 board/ait/cam_enc_4xx/Makefile
> create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c
> create mode 100644 board/ait/cam_enc_4xx/config.mk
> rename mmc_spl/board/samsung/smdkv310/u-boot.lds =>
> board/ait/cam_enc_4xx/u-boot-spl.lds (63%)
> create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg
> create mode 100644 board/hale/tt01/Makefile
> create mode 100644 board/hale/tt01/lowlevel_init.S
> create mode 100644 board/hale/tt01/tt01.c
> create mode 100644 board/matrix_vision/mvblx/Makefile
> create mode 100644 board/matrix_vision/mvblx/config.mk
> create mode 100644 board/matrix_vision/mvblx/fpga.c
> create mode 100644 board/matrix_vision/mvblx/fpga.h
> create mode 100644 board/matrix_vision/mvblx/mvblx.c
> create mode 100644 board/matrix_vision/mvblx/mvblx.h
> create mode 100644 board/matrix_vision/mvblx/sys_eeprom.c
> rename {mmc_spl/board => board}/samsung/smdkv310/mmc_boot.c (83%)
> rename {mmc_spl/board => board}/samsung/smdkv310/tools/mkv310_image.c
> (100%)
> create mode 100644 doc/README.davinci.nand_spl
> create mode 100644 drivers/mtd/nand/nand_spl_load.c
> rename drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} (100%)
> create mode 100644 drivers/video/da8xx-fb.c
> create mode 100644 include/configs/cam_enc_4xx.h
> create mode 100644 include/configs/flea3.h
> create mode 100644 include/configs/omap3_evm_common.h
> create mode 100644 include/configs/omap3_evm_quick_mmc.h
> create mode 100644 include/configs/omap3_evm_quick_nand.h
> create mode 100644 include/configs/omap3_mvblx.h
> create mode 100644 include/configs/tt01.h
> delete mode 100644 mmc_spl/board/samsung/smdkv310/Makefile
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Steal five dollars and you were a petty thief. Steal thousands of
dollars and you are either a government or a hero.
- Terry Pratchett, _Going_Postal_
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-11-07 20:58 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit fec79acc864bed049b6beae719ccbf2bbec5403a:
sandbox: drop unused return (2011-11-03 22:35:25 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Ajay Bhargav (1):
gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
Anatolij Gustschin (4):
ARM: netspace_v2: fix warnings
ARM: DockStar: fix compilation
ARM: dreamplug: fix compilation
imx: imx31_phycore.h: fix checkpatch warnings
Angus Ainslie (2):
ORIGEN : enable device tree support
ORIGEN : use absolute paths and fix tool naming
Bastian Ruppert (4):
Davinci: ea20: set console on UART0
Davinci: ea20: set GPIOs to hold MII-Phy in reset and set
UART0-Switch for console
Davinci: ea20: add gpio for keeping power on in board_late_init
Davinci: ea20: add gpios for LCD backlight control
Chander Kashyap (4):
SMDKV310: Initialize board id using CONFIG_MACH_TYPE
SMDKV310: use get_ram_size() to validate dram size
smdkv310: use spl framework for mmc spl
smdkv310: use macro for mmc data read function address
Christian Riesch (1):
arm, davinci: Add function lpsc_syncreset()
Daniel Gorsulowski (2):
at91: defined mach-types for meesc board in board config file
at91: defined mach-types for otc570 board in board config file
Fabio Estevam (22):
qong: remove unneeded "1" from qong.h
mx31pdk: Add MC13783 PMIC support
mx31: Introduce mx31_set_gpr function
qong: Use mx31_set_gpr to setup USBH2 pins
qong: remove unneeded IOMUX settings
rtc: Make mc13783-rtc driver generic
mx51evk: Add RTC support
mx51evk: Use GPIO API for configuring the IOMUX
mx35pdk: Add RTC support
mx51evk: Remove unneeded '1' from mx51evk.h
mx51evk: Remove unused get_board_rev function
vision2: Remove unused header file
mx53evk: Remove unneeded '1' from mx53evk.h
mx53loco: Remove unused get_board_rev function
mx53evk: Add RTC support
mx53evk: Remove unused get_board_rev function
mx53ard: Remove unused get_board_rev function
mx53smd: Remove unused get_board_rev function
vision2: Remove unused get_board_rev function
mx53: Turn off child clocks before reconfigure perclk_root
README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
mx31pdk: Enable D and I caches
Heiko Schocher (13):
arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
arm, arm926: fix missing symbols in NAND_SPL mode
usb, davinci: add enable_vbus() weak function
arm, usb, davinci: make USBPHY_CTL register configurable
net, davinci_emac: make clock divider in MDIO control register
configurable
spl: add option for adding post memory test to the SPL framework
arm, davinci: add support for new spl framework
spl, nand: add 4bit HW ecc oob first nand_read_page function
arm, davinci: add header files for dm365
arm, davinci: add lowlevel function for dm365 soc
arm926ejs, davinci: add cpuinfo for dm365
arm926ejs, davinci: add missing spi defines for dm365
arm, davinci: add cam_enc_4xx support
Helmut Raiger (4):
misc: pmic: fix regression in pmic_fsl.c (SPI)
mx31: define pins and init for UART2 and CSPI3
mx31: add ESD control registers
mx31: Add board support for HALE TT-01
Holger Brunck (6):
arm/km: add variable waitforne to mgcoge3un
arm/km/mgcoge3un: enhance "waitforne" feature
arm/km: add boardid and hwkey to kernel command line
arm/km: trigger reconfiguration for the Xilinx FPGA
arm/km: enable jffs2 cmds
arm/km: adapt bootcounter evaluation
Ilya Yanok (2):
davinci_emac: compilation fix, phy is array now
omap/spl: actually enable the console
Jens Scharsig (1):
Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board
Lei Wen (2):
pantheon: define CONFIG_SYS_CACHELINE_SIZE
armada100: define CONFIG_SYS_CACHELINE_SIZE
Luca Ceresoli (1):
ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE
Marek Vasut (1):
I2C: Fix mxc_i2c.c problem on imx31_phycore
Matthias Weisser (1):
arm: jadecpu: Readd MACH_TYPE_JADECPU
Michael Jones (1):
OMAP3: mvblx: Initial support for mvBlueLYNX-X
Michael Walle (1):
kirkwood: define CONFIG_SYS_CACHELINE_SIZE
Mike Frysinger (1):
kirkwood: drop empty asm-offsets.s file
Sanjeev Premi (10):
omap3evm: Set environment variable 'ethaddr'
omap3evm: Reorder related config options
omap3evm: Prepare to split configuration
omap3evm: move common config options to new file
omap3evm: Add (quick) configuration for MMC/SD only
omap3evm: Add (quick) configuration for NAND only
omap3evm: fix errors caused by multiple definitions
omap3: mem: Define and use common macros
omap3: mem: Clean-up whitespaces
omap3: mem: Move comments next to definitions
Simon Guinot (2):
netspace_v2: fix SDRAM configuration
netspace_v2: enable I2C EEPROM support
Stefano Babic (17):
MX35: added ESDC structure to imx-regs
MX35: add pins definition for UART3
MX35: add reset cause as provided by other i.MX
MX35: factorize common assembly code
I2C: added I2C-2 and I2C-3 to MX35
MX35: Drop unnecessary prototypes from imx-regs.h
MX51: vision2: add MACH_TYPE in config file
MX35: add support for flea3 board
MX25: tx25: Fix building due to missing MACH_TYPE
Davinci: ea20: Add NAND support
Davinci: ea20: Add early init to get early output from console
Davinci: ea20: Add default U-Boot environment
ARM: Davinci: added missing registers to hardware.h
VIDEO: davinci: add framebuffer to da8xx
Davinci: ea20: added video support
Davinci: ea20: added I2C support
Davinci: ea20: added PREBOOT to configuration
Thomas Herzmann (1):
arm/km: portl2 environment address update to P1B
Tom Rini (2):
am335x: Temporarily add MACH_TYPE define
am335x: Drop board_sysinfo struct
Valentin Longchamp (1):
ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards
Wolfgang Denk (1):
qong: enable support for compressed images
Wolfgang Grandegger (2):
mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
ehci-mxc: remove incorrect comment
?ukasz Majewski (3):
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210
target
misc:pmic:samsung Enable PMIC driver at C210 Universal target
MAINTAINERS | 10 +
Makefile | 8 +-
README | 9 +-
arch/arm/cpu/arm1136/mx31/devices.c | 15 +
arch/arm/cpu/arm1136/mx31/generic.c | 15 +
arch/arm/cpu/arm1136/mx35/generic.c | 31 +-
arch/arm/cpu/arm926ejs/davinci/Makefile | 5 +
arch/arm/cpu/arm926ejs/davinci/cpu.c | 27 +-
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 439 ++++++++++
arch/arm/cpu/arm926ejs/davinci/psc.c | 20 +-
arch/arm/cpu/arm926ejs/davinci/spl.c | 63 ++
arch/arm/cpu/arm926ejs/start.S | 31 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 +
arch/arm/cpu/armv7/omap-common/spl.c | 2 +
arch/arm/include/asm/arch-am33xx/sys_proto.h | 7 -
arch/arm/include/asm/arch-armada100/config.h | 2 +
arch/arm/include/asm/arch-davinci/aintc_defs.h | 50 ++
arch/arm/include/asm/arch-davinci/da8xx-fb.h | 126 +++
arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 41 +
arch/arm/include/asm/arch-davinci/hardware.h | 27 +-
arch/arm/include/asm/arch-davinci/pll_defs.h | 84 ++
arch/arm/include/asm/arch-davinci/psc_defs.h | 86 ++
arch/arm/include/asm/arch-davinci/syscfg_defs.h | 66 ++
arch/arm/include/asm/arch-kirkwood/config.h | 3 +-
arch/arm/include/asm/arch-mx31/clock.h | 2 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 67 ++
arch/arm/include/asm/arch-mx35/imx-regs.h | 34 +-
arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 140 ++++
arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 +
arch/arm/include/asm/arch-omap3/mem.h | 217 +++---
arch/arm/include/asm/arch-pantheon/config.h | 2 +
board/CarMediaLab/flea3/Makefile | 49 ++
board/CarMediaLab/flea3/flea3.c | 289 +++++++
board/CarMediaLab/flea3/lowlevel_init.S | 79 ++
board/LaCie/netspace_v2/kwbimage-is2.cfg | 162 ++++
board/LaCie/netspace_v2/kwbimage.cfg | 4 +-
board/LaCie/netspace_v2/netspace_v2.c | 1 +
board/Marvell/dreamplug/dreamplug.c | 1 +
board/Seagate/dockstar/dockstar.c | 2 +
board/ait/cam_enc_4xx/Makefile | 46 ++
board/ait/cam_enc_4xx/cam_enc_4xx.c | 446 +++++++++++
board/ait/cam_enc_4xx/config.mk | 15 +
.../ait/cam_enc_4xx/u-boot-spl.lds | 63 +-
board/ait/cam_enc_4xx/ublimage.cfg | 48 ++
board/comelit/dig297/dig297.c | 2 -
board/davedenx/qong/qong.c | 8 +-
board/davinci/common/misc.c | 2 +-
board/davinci/ea20/ea20.c | 205 ++++-
board/freescale/mx31pdk/mx31pdk.c | 20 +
board/freescale/mx35pdk/mx35pdk.h | 18 -
board/freescale/mx51evk/mx51evk.c | 17 +-
board/freescale/mx53ard/mx53ard.c | 5 -
board/freescale/mx53evk/mx53evk.c | 5 -
board/freescale/mx53loco/mx53loco.c | 5 -
board/freescale/mx53smd/mx53smd.c | 5 -
board/hale/tt01/Makefile | 51 ++
board/hale/tt01/lowlevel_init.S | 32 +
board/hale/tt01/tt01.c | 200 +++++
board/karo/tx25/tx25.c | 1 -
board/keymile/km_arm/km_arm.c | 55 +-
board/matrix_vision/mvblx/Makefile | 53 ++
board/matrix_vision/mvblx/config.mk | 33 +
board/matrix_vision/mvblx/fpga.c | 219 +++++
board/matrix_vision/mvblx/fpga.h | 32 +
board/matrix_vision/mvblx/mvblx.c | 169 ++++
board/matrix_vision/mvblx/mvblx.h | 362 +++++++++
board/matrix_vision/mvblx/sys_eeprom.c | 395 +++++++++
board/samsung/origen/Makefile | 6 +-
board/samsung/smdkv310/Makefile | 19 +-
.../board => board}/samsung/smdkv310/mmc_boot.c | 15 +-
board/samsung/smdkv310/smdkv310.c | 13 +-
.../samsung/smdkv310/tools/mkv310_image.c | 0
board/samsung/universal_c210/universal.c | 5 +
board/syteco/jadecpu/jadecpu.c | 1 -
board/ti/evm/evm.c | 15 +
board/ttcontrol/vision2/vision2.c | 10 -
boards.cfg | 8 +-
doc/README.SPL | 2 +
doc/README.davinci.nand_spl | 141 ++++
doc/README.omap3 | 5 +
drivers/i2c/mxc_i2c.c | 41 +-
drivers/misc/pmic_fsl.c | 5 +-
drivers/misc/pmic_spi.c | 3 +-
drivers/mtd/nand/Makefile | 3 +
drivers/mtd/nand/nand_spl_load.c | 56 ++
drivers/mtd/nand/nand_spl_simple.c | 43 +-
drivers/net/davinci_emac.c | 11 +-
drivers/net/mvgbe.c | 1 +
drivers/rtc/Makefile | 2 +-
drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} | 0
drivers/rtc/mvrtc.c | 1 +
drivers/usb/host/ehci-mxc.c | 1 -
drivers/usb/musb/davinci.c | 20 +-
drivers/video/Makefile | 1 +
drivers/video/da8xx-fb.c | 846
++++++++++++++++++++
include/configs/am335x_evm.h | 1 +
include/configs/cam_enc_4xx.h | 453 +++++++++++
include/configs/dig297.h | 8 +
include/configs/ea20.h | 126 +++-
include/configs/eb_cpux9k2.h | 2 +
include/configs/efikamx.h | 2 +-
include/configs/flea3.h | 286 +++++++
include/configs/gplugd.h | 12 +-
include/configs/imx31_litekit.h | 2 +-
include/configs/imx31_phycore.h | 153 ++--
include/configs/jadecpu.h | 4 +
include/configs/km/km_arm.h | 9 +-
include/configs/km_kirkwood.h | 3 +
include/configs/meesc.h | 8 +
include/configs/mgcoge3un.h | 2 +
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +
include/configs/mx51evk.h | 14 +-
include/configs/mx53ard.h | 3 +-
include/configs/mx53evk.h | 19 +-
include/configs/mx53loco.h | 3 +-
include/configs/mx53smd.h | 3 +-
include/configs/netspace_v2.h | 18 +-
include/configs/omap3_evm.h | 331 ++-------
include/configs/omap3_evm_common.h | 292 +++++++
include/configs/omap3_evm_quick_mmc.h | 91 +++
include/configs/omap3_evm_quick_nand.h | 79 ++
include/configs/omap3_mvblx.h | 313 ++++++++
include/configs/origen.h | 3 +
include/configs/otc570.h | 7 +
include/configs/portl2.h | 6 +-
include/configs/qong.h | 41 +-
include/configs/s5p_goni.h | 2 +
include/configs/s5pc210_universal.h | 19 +
include/configs/smdkv310.h | 8 +-
include/configs/tt01.h | 254 ++++++
include/configs/tx25.h | 6 +
include/configs/vision2.h | 6 +-
mmc_spl/board/samsung/smdkv310/Makefile | 106 ---
spl/Makefile | 3 +-
tools/ublimage.h | 2 +-
137 files changed, 7876 insertions(+), 850 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c
delete mode 100644 arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s
create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h
create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h
create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S
create mode 100644 board/CarMediaLab/flea3/Makefile
create mode 100644 board/CarMediaLab/flea3/flea3.c
create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S
create mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg
create mode 100644 board/ait/cam_enc_4xx/Makefile
create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c
create mode 100644 board/ait/cam_enc_4xx/config.mk
rename mmc_spl/board/samsung/smdkv310/u-boot.lds =>
board/ait/cam_enc_4xx/u-boot-spl.lds (63%)
create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg
create mode 100644 board/hale/tt01/Makefile
create mode 100644 board/hale/tt01/lowlevel_init.S
create mode 100644 board/hale/tt01/tt01.c
create mode 100644 board/matrix_vision/mvblx/Makefile
create mode 100644 board/matrix_vision/mvblx/config.mk
create mode 100644 board/matrix_vision/mvblx/fpga.c
create mode 100644 board/matrix_vision/mvblx/fpga.h
create mode 100644 board/matrix_vision/mvblx/mvblx.c
create mode 100644 board/matrix_vision/mvblx/mvblx.h
create mode 100644 board/matrix_vision/mvblx/sys_eeprom.c
rename {mmc_spl/board => board}/samsung/smdkv310/mmc_boot.c (83%)
rename {mmc_spl/board => board}/samsung/smdkv310/tools/mkv310_image.c
(100%)
create mode 100644 doc/README.davinci.nand_spl
create mode 100644 drivers/mtd/nand/nand_spl_load.c
rename drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} (100%)
create mode 100644 drivers/video/da8xx-fb.c
create mode 100644 include/configs/cam_enc_4xx.h
create mode 100644 include/configs/flea3.h
create mode 100644 include/configs/omap3_evm_common.h
create mode 100644 include/configs/omap3_evm_quick_mmc.h
create mode 100644 include/configs/omap3_evm_quick_nand.h
create mode 100644 include/configs/omap3_mvblx.h
create mode 100644 include/configs/tt01.h
delete mode 100644 mmc_spl/board/samsung/smdkv310/Makefile
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-10-21 18:44 ` Albert ARIBAUD
@ 2011-10-21 19:12 ` Simon Glass
0 siblings, 0 replies; 261+ messages in thread
From: Simon Glass @ 2011-10-21 19:12 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Fri, Oct 21, 2011 at 11:44 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Simon,
>
> Le 04/10/2011 07:35, Simon Glass a ?crit :
>>
>> Hi Albert,
>>
>> On Fri, Sep 30, 2011 at 1:09 PM, Albert ARIBAUD
>> <albert.u.boot@aribaud.net> ?wrote:
>>>
>>> Hi Wolfgang,
>>>
>>> I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
>>> therefore...
>>
>> Are you able to pick my the tegra clock/pinmux patch set as discussed
>> please? I will get started on the next series.
>>
>> Regards,
>> Simon
>>
>>>
>>> The following changes since commit
>>> 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
>
> FYI, these should all be in the current u-boot-arm/master. Let me know if
> anything is missing.
Yes I see them, and have been basing off these recently, thank you.
Please also see my other email about Stephen Warren's new changes,
which are the next lot to go in.
Regards,
Simon
>
> Amicalement,
> --
> Albert.
>
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-10-04 5:35 ` Simon Glass
@ 2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-10-21 18:44 UTC (permalink / raw)
To: u-boot
Hi Simon,
Le 04/10/2011 07:35, Simon Glass a ?crit :
> Hi Albert,
>
> On Fri, Sep 30, 2011 at 1:09 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>> Hi Wolfgang,
>>
>> I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
>> therefore...
>
> Are you able to pick my the tegra clock/pinmux patch set as discussed
> please? I will get started on the next series.
>
> Regards,
> Simon
>
>>
>> The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
FYI, these should all be in the current u-boot-arm/master. Let me know
if anything is missing.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
@ 2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Simon Glass @ 2011-10-04 5:35 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Fri, Sep 30, 2011 at 1:09 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Wolfgang,
>
> I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
> therefore...
Are you able to pick my the tegra clock/pinmux patch set as discussed
please? I will get started on the next series.
Regards,
Simon
>
> The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-30 20:09 Albert ARIBAUD
@ 2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
1 sibling, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-10-01 19:40 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E8621F5.9010409@aribaud.net> you wrote:
> Hi Wolfgang,
>
> I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
> therefore...
>
> The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
>
> Prepare v2011.09 (2011-09-29 21:11:15 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Ajay Bhargav (5):
> gpio: Add GPIO driver framework for Marvell SoCs
> gpio: Add GPIO driver for Marvell SoC Armada100
> net: Adds Fast Ethernet Controller driver for Armada100
> Armada100: Enable Ethernet support for GplugD
> Armada100: Enable 88E3015 PHY support for GplugD
>
> Aneesh V (1):
> omap4: update maintainer for omap4 boards
>
> Balaji T K (2):
> mmc: omap: enable high capacity
> mmc: omap: config VMMC, MMC1_PBIAS
>
> Fabio Estevam (25):
> ARM: mx25: Print the silicon revison
> ARM: mx25: Print the source of reset
> MX31: mx31pdk: Remove nand_spl config.mk file
> MX31: Improve readability for reset cause
> mx31pdk: Change the prompt as per other i.MX boards
> MX25: tx25: Avoid the usage of extern in C file
> MX25: Add initial support for MX25PDK
> MX31: Disable watchdog during low-power modes
> mx31pdk: Remove dram_init_banksize()
> mx25pdk: Remove dram_init_banksize()
> mx31ads: Remove dram_init_banksize()
> imx31_litekit: Remove dram_init_banksize()
> mx31pdk: Place machine ID into board config
> mx25pdk: Place machine ID into board config
> mx31ads: Place machine ID into board config
> imx31_litekit: Place machine ID into board config
> mx51evk: Place machine ID into board config
> mx53loco: Place machine ID into board config
> mx53smd: Place machine ID into board config
> mx53ard: Place machine ID into board config
> mx53evk: Place machine ID into board config
> zmx25: Remove dram_init_banksize()
> zmx25: Place machine ID into board config
> zmx25: Fix build warning due to 'get_reset_cause' defined but not
> used
> vision2: Place machine ID into board config
>
> Heiko Schocher (16):
> i2c, davinci: add i2c set speed
> net, davinci_emac: add KSZ8864 switch
> net, davinci_emac: make less verbose - turn printf() into debug()
> net, davinci_emac: let the EMAC detect the PHYs
> arm, davinci: move davinci_timer in header file
> arm, davinci: add missing timer baseaddresses for !DA8xx cpu
> arm, davinci: add internal WDT support for AM1808 cpus
> arm, davinci: add RTC base addr
> rtc, davinci: add support for davinci internal RTC
> arm, davinci: add SYSCFG1 base and register struct
> arm, davinci: add some missing defines in hardware.h
> arm, davinci, am1808, gpio: add missing defines for bank 8
> arm, davinci: add ddr2 definition
> arm, davinci: add NOR Boot Configuration Word
> arm, davinci, am1808: add lowlevel functions for booting from NOR
> arm, davinci, da8xx: add cpuinfo
>
> Jason Liu (1):
> cosmetic: fsl_pmic: cosmetic for the help message
>
> Joe Hershberger (1):
> omap4_panda: Ignore omap4 SPL called MLO
>
> Marek Vasut (19):
> EfikaMX: Adjust undocumented magic constant in config file
> FEC: Use proper accessor to read register in debug call
> FEC: Use defined constant instead of magic number
> FEC: Kill mode select FIXME's
> FEC: Add RMII mode support
> FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
> FEC: Abstract access to fec->eth in MII operations
> FEC: Allow multiple FECes
> FEC: Allow registering MII postconfiguration callback
> FEC: Add timeout for chip reset
> FEC: Squish "got MAC from fuse" message, make it debug()
> FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
> MX5: Modify the PLL decoding algorithm
> MX5: Add AHB clock reporting and fix IPG clock reporting
> MX5: Clean up the output of "clocks" command
> I2C: mxc_i2c rework
> ATA: Squash warnings in mxc_ata.
> EfikaMX: Add imximage config for Efika SB
> EfikaSB: Add preliminary EfikaSB support
>
> Philip Balister (2):
> OMAP3: Overo: Update GPMC timing for ethernet chip
> overo: Set IEN on GPMC_CLK to support synchronous clocking.
>
> Sandeep Paulraj (1):
> devkit8000: Fix build break
>
> Sanjeev Premi (2):
> omap3: Fix compile warning
> omap3evm: env: Fix default console
>
> Simon Schwarz (9):
> omap-common/omap4: relocate early UART clock setup
> omap3: Configure RAM bank 0 if in SPL
> omap-common: add nand spl support
> spl: add NAND Library to new SPL
> spl: Add POWER library to new spl
> omap3: new SPL structure support
> devkit8000: Add nand-spl support for new SPL
> omap3: implement boot parameter saving
> omap-common: reorganize spl.c
>
> Thomas Weber (1):
> Devkit8000: Change console from ttyS2 to ttyO2
>
> .gitignore | 1 +
> MAINTAINERS | 9 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 4 +-
> arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
> arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 ++++++++++++
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 16 +-
> arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 68 ++
> arch/arm/cpu/arm926ejs/davinci/timer.c | 46 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 53 ++-
> arch/arm/cpu/arm926ejs/start.S | 9 +
> arch/arm/cpu/armv7/mx5/clock.c | 114 +++-
> arch/arm/cpu/armv7/omap-common/Makefile | 6 +
> arch/arm/cpu/armv7/omap-common/spl.c | 165 +----
> arch/arm/cpu/armv7/omap-common/spl_mmc.c | 150 ++++
> arch/arm/cpu/armv7/omap-common/spl_nand.c | 71 ++
> arch/arm/cpu/armv7/omap3/board.c | 50 ++-
> arch/arm/cpu/armv7/omap3/config.mk | 30 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 +
> arch/arm/cpu/armv7/omap3/sdrc.c | 32 +-
> arch/arm/cpu/armv7/omap3/sys_info.c | 2 +-
> arch/arm/cpu/armv7/omap4/board.c | 1 +
> arch/arm/include/asm/arch-armada100/armada100.h | 58 ++
> arch/arm/include/asm/arch-armada100/gpio.h | 48 ++
> arch/arm/include/asm/arch-armada100/mfp.h | 19 +
> .../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 ++
> arch/arm/include/asm/arch-davinci/ddr2_defs.h | 96 +++
> arch/arm/include/asm/arch-davinci/emac_defs.h | 6 +
> arch/arm/include/asm/arch-davinci/gpio.h | 2 +
> arch/arm/include/asm/arch-davinci/hardware.h | 30 +
> arch/arm/include/asm/arch-davinci/timer_defs.h | 44 ++
> arch/arm/include/asm/arch-mx25/imx-regs.h | 4 +-
> arch/arm/include/asm/arch-mx25/sys_proto.h | 29 +
> arch/arm/include/asm/arch-mx27/imx-regs.h | 1 -
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 2 -
> arch/arm/include/asm/arch-mx5/crm_regs.h | 11 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 5 +-
> arch/arm/include/asm/arch-omap3/mem.h | 36 +
> arch/arm/include/asm/arch-omap3/omap_gpmc.h | 9 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap4/omap4.h | 8 +-
> arch/arm/include/asm/omap_common.h | 31 +
> board/Marvell/gplugd/gplugd.c | 71 ++
> board/efikamx/efikamx.c | 124 +++-
> board/efikamx/{imximage.cfg => imximage_mx.cfg} | 0
> board/efikamx/{imximage.cfg => imximage_sb.cfg} | 26 +-
> board/freescale/mx25pdk/Makefile | 49 ++
> board/freescale/mx25pdk/imximage.cfg | 73 ++
> board/freescale/mx25pdk/lowlevel_init.S | 21 +
> board/freescale/mx25pdk/mx25pdk.c | 56 ++
> board/freescale/mx31ads/mx31ads.c | 7 -
> board/freescale/mx31pdk/mx31pdk.c | 7 -
> board/freescale/mx51evk/mx51evk.c | 1 -
> board/freescale/mx53ard/mx53ard.c | 1 -
> board/freescale/mx53evk/mx53evk.c | 1 -
> board/freescale/mx53loco/mx53loco.c | 1 -
> board/freescale/mx53smd/mx53smd.c | 1 -
> board/isee/igep0020/igep0020.c | 1 +
> board/isee/igep0020/igep0020.h | 9 -
> board/karo/tx25/tx25.c | 3 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 7 -
> board/overo/overo.c | 1 +
> board/overo/overo.h | 11 +-
> board/syteco/zmx25/zmx25.c | 8 -
> board/timll/devkit8000/devkit8000.c | 2 +-
> board/ttcontrol/vision2/vision2.c | 1 -
> boards.cfg | 5 +-
> doc/README.SPL | 2 +
> doc/README.davinci | 9 +
> drivers/block/mxc_ata.c | 22 +-
> drivers/gpio/Makefile | 1 +
> drivers/gpio/mvgpio.c | 115 +++
> drivers/gpio/mvgpio.h | 74 ++
> drivers/i2c/davinci_i2c.c | 5 +
> drivers/i2c/mxc_i2c.c | 422 ++++++++----
> drivers/misc/fsl_pmic.c | 2 +-
> drivers/mmc/omap_hsmmc.c | 34 +-
> drivers/mtd/nand/Makefile | 10 +-
> drivers/mtd/nand/nand_base.c | 4 +-
> drivers/mtd/nand/nand_spl_simple.c | 245 +++++++
> drivers/mtd/nand/omap_gpmc.c | 27 +
> drivers/net/Makefile | 1 +
> drivers/net/armada100_fec.c | 736
> ++++++++++++++++++++
> drivers/net/armada100_fec.h | 232 ++++++
> drivers/net/davinci_emac.c | 12 +-
> drivers/net/fec_mxc.c | 170 +++--
> drivers/net/fec_mxc.h | 9 +-
> drivers/power/twl6030.c | 7 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/davinci.c | 125 ++++
> include/configs/devkit8000.h | 48 ++-
> include/configs/efikamx.h | 6 +-
> include/configs/gplugd.h | 30 +-
> include/configs/imx31_litekit.h | 4 +-
> include/configs/mx25pdk.h | 108 +++
> include/configs/mx31ads.h | 2 +
> include/configs/mx31pdk.h | 4 +-
> include/configs/mx51evk.h | 1 +
> include/configs/mx53ard.h | 2 +
> include/configs/mx53evk.h | 2 +
> include/configs/mx53loco.h | 2 +
> include/configs/mx53smd.h | 4 +-
> include/configs/omap3_evm.h | 2 +-
> include/configs/omap4_common.h | 2 +
> include/configs/omap4_sdp4430.h | 2 +
> include/configs/vision2.h | 2 +
> include/configs/zmx25.h | 1 +
> include/nand.h | 6 +
> include/netdev.h | 8 +-
> include/twl6030.h | 3 +
> nand_spl/board/freescale/mx31pdk/Makefile | 2 +-
> nand_spl/board/freescale/mx31pdk/config.mk | 1 -
> spl/Makefile | 2 +
> 114 files changed, 4237 insertions(+), 515 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
> create mode 100644 arch/arm/cpu/arm926ejs/davinci/ksz8873.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl_mmc.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
> create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
> create mode 100644 arch/arm/include/asm/arch-armada100/gpio.h
> create mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
> create mode 100644 arch/arm/include/asm/arch-davinci/ddr2_defs.h
> create mode 100644 arch/arm/include/asm/arch-davinci/timer_defs.h
> create mode 100644 arch/arm/include/asm/arch-mx25/sys_proto.h
> copy board/efikamx/{imximage.cfg => imximage_mx.cfg} (100%)
> rename board/efikamx/{imximage.cfg => imximage_sb.cfg} (90%)
> create mode 100644 board/freescale/mx25pdk/Makefile
> create mode 100644 board/freescale/mx25pdk/imximage.cfg
> create mode 100644 board/freescale/mx25pdk/lowlevel_init.S
> create mode 100644 board/freescale/mx25pdk/mx25pdk.c
> create mode 100644 drivers/gpio/mvgpio.c
> create mode 100644 drivers/gpio/mvgpio.h
> create mode 100644 drivers/mtd/nand/nand_spl_simple.c
> create mode 100644 drivers/net/armada100_fec.c
> create mode 100644 drivers/net/armada100_fec.h
> create mode 100644 drivers/rtc/davinci.c
> create mode 100644 include/configs/mx25pdk.h
> delete mode 100644 nand_spl/board/freescale/mx31pdk/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All a hacker needs is a tight PUSHJ, a loose pair of UUOs, and a warm
place to shift.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-30 20:09 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
therefore...
The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
Prepare v2011.09 (2011-09-29 21:11:15 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Ajay Bhargav (5):
gpio: Add GPIO driver framework for Marvell SoCs
gpio: Add GPIO driver for Marvell SoC Armada100
net: Adds Fast Ethernet Controller driver for Armada100
Armada100: Enable Ethernet support for GplugD
Armada100: Enable 88E3015 PHY support for GplugD
Aneesh V (1):
omap4: update maintainer for omap4 boards
Balaji T K (2):
mmc: omap: enable high capacity
mmc: omap: config VMMC, MMC1_PBIAS
Fabio Estevam (25):
ARM: mx25: Print the silicon revison
ARM: mx25: Print the source of reset
MX31: mx31pdk: Remove nand_spl config.mk file
MX31: Improve readability for reset cause
mx31pdk: Change the prompt as per other i.MX boards
MX25: tx25: Avoid the usage of extern in C file
MX25: Add initial support for MX25PDK
MX31: Disable watchdog during low-power modes
mx31pdk: Remove dram_init_banksize()
mx25pdk: Remove dram_init_banksize()
mx31ads: Remove dram_init_banksize()
imx31_litekit: Remove dram_init_banksize()
mx31pdk: Place machine ID into board config
mx25pdk: Place machine ID into board config
mx31ads: Place machine ID into board config
imx31_litekit: Place machine ID into board config
mx51evk: Place machine ID into board config
mx53loco: Place machine ID into board config
mx53smd: Place machine ID into board config
mx53ard: Place machine ID into board config
mx53evk: Place machine ID into board config
zmx25: Remove dram_init_banksize()
zmx25: Place machine ID into board config
zmx25: Fix build warning due to 'get_reset_cause' defined but not
used
vision2: Place machine ID into board config
Heiko Schocher (16):
i2c, davinci: add i2c set speed
net, davinci_emac: add KSZ8864 switch
net, davinci_emac: make less verbose - turn printf() into debug()
net, davinci_emac: let the EMAC detect the PHYs
arm, davinci: move davinci_timer in header file
arm, davinci: add missing timer baseaddresses for !DA8xx cpu
arm, davinci: add internal WDT support for AM1808 cpus
arm, davinci: add RTC base addr
rtc, davinci: add support for davinci internal RTC
arm, davinci: add SYSCFG1 base and register struct
arm, davinci: add some missing defines in hardware.h
arm, davinci, am1808, gpio: add missing defines for bank 8
arm, davinci: add ddr2 definition
arm, davinci: add NOR Boot Configuration Word
arm, davinci, am1808: add lowlevel functions for booting from NOR
arm, davinci, da8xx: add cpuinfo
Jason Liu (1):
cosmetic: fsl_pmic: cosmetic for the help message
Joe Hershberger (1):
omap4_panda: Ignore omap4 SPL called MLO
Marek Vasut (19):
EfikaMX: Adjust undocumented magic constant in config file
FEC: Use proper accessor to read register in debug call
FEC: Use defined constant instead of magic number
FEC: Kill mode select FIXME's
FEC: Add RMII mode support
FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
FEC: Abstract access to fec->eth in MII operations
FEC: Allow multiple FECes
FEC: Allow registering MII postconfiguration callback
FEC: Add timeout for chip reset
FEC: Squish "got MAC from fuse" message, make it debug()
FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
MX5: Modify the PLL decoding algorithm
MX5: Add AHB clock reporting and fix IPG clock reporting
MX5: Clean up the output of "clocks" command
I2C: mxc_i2c rework
ATA: Squash warnings in mxc_ata.
EfikaMX: Add imximage config for Efika SB
EfikaSB: Add preliminary EfikaSB support
Philip Balister (2):
OMAP3: Overo: Update GPMC timing for ethernet chip
overo: Set IEN on GPMC_CLK to support synchronous clocking.
Sandeep Paulraj (1):
devkit8000: Fix build break
Sanjeev Premi (2):
omap3: Fix compile warning
omap3evm: env: Fix default console
Simon Schwarz (9):
omap-common/omap4: relocate early UART clock setup
omap3: Configure RAM bank 0 if in SPL
omap-common: add nand spl support
spl: add NAND Library to new SPL
spl: Add POWER library to new spl
omap3: new SPL structure support
devkit8000: Add nand-spl support for new SPL
omap3: implement boot parameter saving
omap-common: reorganize spl.c
Thomas Weber (1):
Devkit8000: Change console from ttyS2 to ttyO2
.gitignore | 1 +
MAINTAINERS | 9 +-
arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
arch/arm/cpu/arm1136/mx31/timer.c | 4 +-
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 ++++++++++++
arch/arm/cpu/arm926ejs/davinci/cpu.c | 16 +-
arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 68 ++
arch/arm/cpu/arm926ejs/davinci/timer.c | 46 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 53 ++-
arch/arm/cpu/arm926ejs/start.S | 9 +
arch/arm/cpu/armv7/mx5/clock.c | 114 +++-
arch/arm/cpu/armv7/omap-common/Makefile | 6 +
arch/arm/cpu/armv7/omap-common/spl.c | 165 +----
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 150 ++++
arch/arm/cpu/armv7/omap-common/spl_nand.c | 71 ++
arch/arm/cpu/armv7/omap3/board.c | 50 ++-
arch/arm/cpu/armv7/omap3/config.mk | 30 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 +
arch/arm/cpu/armv7/omap3/sdrc.c | 32 +-
arch/arm/cpu/armv7/omap3/sys_info.c | 2 +-
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/include/asm/arch-armada100/armada100.h | 58 ++
arch/arm/include/asm/arch-armada100/gpio.h | 48 ++
arch/arm/include/asm/arch-armada100/mfp.h | 19 +
.../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 ++
arch/arm/include/asm/arch-davinci/ddr2_defs.h | 96 +++
arch/arm/include/asm/arch-davinci/emac_defs.h | 6 +
arch/arm/include/asm/arch-davinci/gpio.h | 2 +
arch/arm/include/asm/arch-davinci/hardware.h | 30 +
arch/arm/include/asm/arch-davinci/timer_defs.h | 44 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 4 +-
arch/arm/include/asm/arch-mx25/sys_proto.h | 29 +
arch/arm/include/asm/arch-mx27/imx-regs.h | 1 -
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 -
arch/arm/include/asm/arch-mx5/crm_regs.h | 11 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 5 +-
arch/arm/include/asm/arch-omap3/mem.h | 36 +
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 9 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/omap4.h | 8 +-
arch/arm/include/asm/omap_common.h | 31 +
board/Marvell/gplugd/gplugd.c | 71 ++
board/efikamx/efikamx.c | 124 +++-
board/efikamx/{imximage.cfg => imximage_mx.cfg} | 0
board/efikamx/{imximage.cfg => imximage_sb.cfg} | 26 +-
board/freescale/mx25pdk/Makefile | 49 ++
board/freescale/mx25pdk/imximage.cfg | 73 ++
board/freescale/mx25pdk/lowlevel_init.S | 21 +
board/freescale/mx25pdk/mx25pdk.c | 56 ++
board/freescale/mx31ads/mx31ads.c | 7 -
board/freescale/mx31pdk/mx31pdk.c | 7 -
board/freescale/mx51evk/mx51evk.c | 1 -
board/freescale/mx53ard/mx53ard.c | 1 -
board/freescale/mx53evk/mx53evk.c | 1 -
board/freescale/mx53loco/mx53loco.c | 1 -
board/freescale/mx53smd/mx53smd.c | 1 -
board/isee/igep0020/igep0020.c | 1 +
board/isee/igep0020/igep0020.h | 9 -
board/karo/tx25/tx25.c | 3 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 7 -
board/overo/overo.c | 1 +
board/overo/overo.h | 11 +-
board/syteco/zmx25/zmx25.c | 8 -
board/timll/devkit8000/devkit8000.c | 2 +-
board/ttcontrol/vision2/vision2.c | 1 -
boards.cfg | 5 +-
doc/README.SPL | 2 +
doc/README.davinci | 9 +
drivers/block/mxc_ata.c | 22 +-
drivers/gpio/Makefile | 1 +
drivers/gpio/mvgpio.c | 115 +++
drivers/gpio/mvgpio.h | 74 ++
drivers/i2c/davinci_i2c.c | 5 +
drivers/i2c/mxc_i2c.c | 422 ++++++++----
drivers/misc/fsl_pmic.c | 2 +-
drivers/mmc/omap_hsmmc.c | 34 +-
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 245 +++++++
drivers/mtd/nand/omap_gpmc.c | 27 +
drivers/net/Makefile | 1 +
drivers/net/armada100_fec.c | 736
++++++++++++++++++++
drivers/net/armada100_fec.h | 232 ++++++
drivers/net/davinci_emac.c | 12 +-
drivers/net/fec_mxc.c | 170 +++--
drivers/net/fec_mxc.h | 9 +-
drivers/power/twl6030.c | 7 +
drivers/rtc/Makefile | 1 +
drivers/rtc/davinci.c | 125 ++++
include/configs/devkit8000.h | 48 ++-
include/configs/efikamx.h | 6 +-
include/configs/gplugd.h | 30 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/mx25pdk.h | 108 +++
include/configs/mx31ads.h | 2 +
include/configs/mx31pdk.h | 4 +-
include/configs/mx51evk.h | 1 +
include/configs/mx53ard.h | 2 +
include/configs/mx53evk.h | 2 +
include/configs/mx53loco.h | 2 +
include/configs/mx53smd.h | 4 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omap4_common.h | 2 +
include/configs/omap4_sdp4430.h | 2 +
include/configs/vision2.h | 2 +
include/configs/zmx25.h | 1 +
include/nand.h | 6 +
include/netdev.h | 8 +-
include/twl6030.h | 3 +
nand_spl/board/freescale/mx31pdk/Makefile | 2 +-
nand_spl/board/freescale/mx31pdk/config.mk | 1 -
spl/Makefile | 2 +
114 files changed, 4237 insertions(+), 515 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/ksz8873.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_mmc.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
create mode 100644 arch/arm/include/asm/arch-armada100/gpio.h
create mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
create mode 100644 arch/arm/include/asm/arch-davinci/ddr2_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/timer_defs.h
create mode 100644 arch/arm/include/asm/arch-mx25/sys_proto.h
copy board/efikamx/{imximage.cfg => imximage_mx.cfg} (100%)
rename board/efikamx/{imximage.cfg => imximage_sb.cfg} (90%)
create mode 100644 board/freescale/mx25pdk/Makefile
create mode 100644 board/freescale/mx25pdk/imximage.cfg
create mode 100644 board/freescale/mx25pdk/lowlevel_init.S
create mode 100644 board/freescale/mx25pdk/mx25pdk.c
create mode 100644 drivers/gpio/mvgpio.c
create mode 100644 drivers/gpio/mvgpio.h
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
create mode 100644 drivers/net/armada100_fec.c
create mode 100644 drivers/net/armada100_fec.h
create mode 100644 drivers/rtc/davinci.c
create mode 100644 include/configs/mx25pdk.h
delete mode 100644 nand_spl/board/freescale/mx31pdk/config.mk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-28 6:38 Albert ARIBAUD
@ 2011-09-28 18:42 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-09-28 18:42 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E82C0F9.40906@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 279bbbca12e71ae68278b756048194003a6d6e21:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-09-23
> 08:23:25 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Albert ARIBAUD (1):
> ARM: remove broken "ixdp425" and "ixpdg425" boards
>
> MAINTAINERS | 2 -
> board/ixdp425/Makefile | 50 --------
> board/ixdp425/ixdp425.c | 238 ---------------------------------------
> boards.cfg | 2 -
> doc/README.scrapyard | 2 +
> include/configs/ixdp425.h | 268
> --------------------------------------------
> include/configs/ixdpg425.h | 256
> ------------------------------------------
> 7 files changed, 2 insertions(+), 816 deletions(-)
> delete mode 100644 board/ixdp425/Makefile
> delete mode 100644 board/ixdp425/ixdp425.c
> delete mode 100644 include/configs/ixdp425.h
> delete mode 100644 include/configs/ixdpg425.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Old programmers never die, they just become managers.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-28 6:38 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 279bbbca12e71ae68278b756048194003a6d6e21:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-09-23
08:23:25 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert ARIBAUD (1):
ARM: remove broken "ixdp425" and "ixpdg425" boards
MAINTAINERS | 2 -
board/ixdp425/Makefile | 50 --------
board/ixdp425/ixdp425.c | 238 ---------------------------------------
boards.cfg | 2 -
doc/README.scrapyard | 2 +
include/configs/ixdp425.h | 268
--------------------------------------------
include/configs/ixdpg425.h | 256
------------------------------------------
7 files changed, 2 insertions(+), 816 deletions(-)
delete mode 100644 board/ixdp425/Makefile
delete mode 100644 board/ixdp425/ixdp425.c
delete mode 100644 include/configs/ixdp425.h
delete mode 100644 include/configs/ixdpg425.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-22 21:03 Albert ARIBAUD
@ 2011-09-23 6:29 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-09-23 6:29 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E7BA2B0.4050002@aribaud.net> you wrote:
> H Wolfgang,
>
> The following changes since commit bc196029f53c2d82eb9a12eb8b66e696b6284941:
>
> Prepare v2011.09-rc2 (2011-09-22 21:58:05 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Dirk Behme (1):
> OMAP3: beagle: Fix build warning in beagle.c
>
> board/ti/beagle/beagle.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Commitment, n.: Commitment can be illustrated by a breakfast
of ham and eggs. The chicken was involved, the pig was committed.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-22 21:03 UTC (permalink / raw)
To: u-boot
H Wolfgang,
The following changes since commit bc196029f53c2d82eb9a12eb8b66e696b6284941:
Prepare v2011.09-rc2 (2011-09-22 21:58:05 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Dirk Behme (1):
OMAP3: beagle: Fix build warning in beagle.c
board/ti/beagle/beagle.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-14 6:57 Albert ARIBAUD
@ 2011-09-15 12:24 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-09-15 12:24 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E705073.1090106@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 6ceb0135f96d73063ffbaab5be7ce23933367388:
>
> Prepare v2011.09 (2011-09-11 21:31:04 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Aneesh V (4):
> omap4: factor out common part from board config headers
> omap4: make SDRAM init work for ES1.0 silicon
> omap4: IO settings
> omap4: fix pad configuration settings for SDP and Panda
>
> Fabio Estevam (2):
> MX25: tx25: Fix build by making use of GPIO framework
> MX25: tx25: Cleanup tx25.h config
>
> Howard D. Gray (1):
> ARMV7: OMAP3: Add 37xx ESx revision numbers.
>
> Jason Kridner (1):
> led: remove camel casing of led identifiers globally
>
> Joel A Fernandes (1):
> OMAP: Add function to get state of a GPIO output
>
> Michael Jones (2):
> ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
> ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
>
> Nagabhushana Netagunte (3):
> da830: modify the U-Boot prompt string
> da830: enable SPI flash boot mode
> da830: modify the MEMTEST start and end address
>
> Sandeep Paulraj (2):
> OMAP3 Beagle: Minor config cleanup
> DA830: Fix Build Warning
>
> Sanjeev Premi (4):
> omap3: beagle: Fix build warning
> omap: gpio: Use generic API
> omap: gpio: generic changes after changing API
> omap: gpio: Adapt board files to use generic API
>
> arch/arm/cpu/arm1176/start.S | 2 +-
> arch/arm/cpu/arm720t/start.S | 2 +-
> arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++--
> arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 10 +-
> arch/arm/cpu/arm920t/start.S | 2 +-
> arch/arm/cpu/arm925t/start.S | 2 +-
> arch/arm/cpu/arm926ejs/at91/led.c | 12 +-
> arch/arm/cpu/arm926ejs/start.S | 2 +-
> arch/arm/cpu/arm_intcm/start.S | 2 +-
> arch/arm/cpu/armv7/omap-common/gpio.c | 105 +++++++++--
> arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++-
> arch/arm/cpu/armv7/omap4/board.c | 62 ++++++
> arch/arm/cpu/armv7/omap4/clocks.c | 5 +-
> arch/arm/cpu/armv7/omap4/emif.c | 72 +------
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++--
> arch/arm/cpu/ixp/start.S | 2 +-
> arch/arm/cpu/s3c44b0/start.S | 2 +-
> arch/arm/include/asm/arch-omap3/omap3.h | 10 +
> arch/arm/include/asm/arch-omap4/emif.h | 23 +--
> arch/arm/include/asm/arch-omap4/omap4.h | 45 ++++-
> arch/arm/include/asm/omap_gpio.h | 13 --
> arch/arm/lib/board.c | 32 ++--
> board/atmel/at91rm9200ek/led.c | 12 +-
> board/cm_t35/leds.c | 10 +-
> board/comelit/dig297/dig297.c | 12 +-
> board/eukrea/cpu9260/led.c | 48 +++---
> board/isee/igep0020/igep0020.c | 12 +-
> board/karo/tx25/tx25.c | 1 +
> board/logicpd/zoom2/debug_board.c | 10 +-
> board/logicpd/zoom2/led.c | 66 ++++----
> board/logicpd/zoom2/zoom2.c | 10 +-
> board/overo/overo.c | 54 +++---
> board/ti/beagle/beagle.c | 44 ++--
> board/ti/beagle/led.c | 26 ++--
> board/ti/evm/evm.c | 12 +-
> board/ti/panda/panda_mux_data.h | 41 ++--
> board/ti/sdp4430/sdp4430_mux_data.h | 9 +-
> common/cmd_led.c | 8 +-
> doc/README.omap3 | 20 +-
> drivers/i2c/omap24xx_i2c.c | 241
> +++++++++++-------------
> include/configs/da830evm.h | 18 +-
> include/configs/omap3_beagle.h | 3 +-
> include/configs/omap4_common.h | 275
> +++++++++++++++++++++++++++
> include/configs/omap4_panda.h | 244
> +-----------------------
> include/configs/omap4_sdp4430.h | 245
> +-----------------------
> include/configs/tx25.h | 16 +-
> include/status_led.h | 32 ++--
> 47 files changed, 916 insertions(+), 1019 deletions(-)
> create mode 100644 include/configs/omap4_common.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you think the problem is bad now, just wait until we've solved it.
Epstein's Law
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-14 6:57 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 6ceb0135f96d73063ffbaab5be7ce23933367388:
Prepare v2011.09 (2011-09-11 21:31:04 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Aneesh V (4):
omap4: factor out common part from board config headers
omap4: make SDRAM init work for ES1.0 silicon
omap4: IO settings
omap4: fix pad configuration settings for SDP and Panda
Fabio Estevam (2):
MX25: tx25: Fix build by making use of GPIO framework
MX25: tx25: Cleanup tx25.h config
Howard D. Gray (1):
ARMV7: OMAP3: Add 37xx ESx revision numbers.
Jason Kridner (1):
led: remove camel casing of led identifiers globally
Joel A Fernandes (1):
OMAP: Add function to get state of a GPIO output
Michael Jones (2):
ARMV7: OMAP: Write more than 1 byte at a time in i2c_write
ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
Nagabhushana Netagunte (3):
da830: modify the U-Boot prompt string
da830: enable SPI flash boot mode
da830: modify the MEMTEST start and end address
Sandeep Paulraj (2):
OMAP3 Beagle: Minor config cleanup
DA830: Fix Build Warning
Sanjeev Premi (4):
omap3: beagle: Fix build warning
omap: gpio: Use generic API
omap: gpio: generic changes after changing API
omap: gpio: Adapt board files to use generic API
arch/arm/cpu/arm1176/start.S | 2 +-
arch/arm/cpu/arm720t/start.S | 2 +-
arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++--
arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 10 +-
arch/arm/cpu/arm920t/start.S | 2 +-
arch/arm/cpu/arm925t/start.S | 2 +-
arch/arm/cpu/arm926ejs/at91/led.c | 12 +-
arch/arm/cpu/arm926ejs/start.S | 2 +-
arch/arm/cpu/arm_intcm/start.S | 2 +-
arch/arm/cpu/armv7/omap-common/gpio.c | 105 +++++++++--
arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++-
arch/arm/cpu/armv7/omap4/board.c | 62 ++++++
arch/arm/cpu/armv7/omap4/clocks.c | 5 +-
arch/arm/cpu/armv7/omap4/emif.c | 72 +------
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++--
arch/arm/cpu/ixp/start.S | 2 +-
arch/arm/cpu/s3c44b0/start.S | 2 +-
arch/arm/include/asm/arch-omap3/omap3.h | 10 +
arch/arm/include/asm/arch-omap4/emif.h | 23 +--
arch/arm/include/asm/arch-omap4/omap4.h | 45 ++++-
arch/arm/include/asm/omap_gpio.h | 13 --
arch/arm/lib/board.c | 32 ++--
board/atmel/at91rm9200ek/led.c | 12 +-
board/cm_t35/leds.c | 10 +-
board/comelit/dig297/dig297.c | 12 +-
board/eukrea/cpu9260/led.c | 48 +++---
board/isee/igep0020/igep0020.c | 12 +-
board/karo/tx25/tx25.c | 1 +
board/logicpd/zoom2/debug_board.c | 10 +-
board/logicpd/zoom2/led.c | 66 ++++----
board/logicpd/zoom2/zoom2.c | 10 +-
board/overo/overo.c | 54 +++---
board/ti/beagle/beagle.c | 44 ++--
board/ti/beagle/led.c | 26 ++--
board/ti/evm/evm.c | 12 +-
board/ti/panda/panda_mux_data.h | 41 ++--
board/ti/sdp4430/sdp4430_mux_data.h | 9 +-
common/cmd_led.c | 8 +-
doc/README.omap3 | 20 +-
drivers/i2c/omap24xx_i2c.c | 241
+++++++++++-------------
include/configs/da830evm.h | 18 +-
include/configs/omap3_beagle.h | 3 +-
include/configs/omap4_common.h | 275
+++++++++++++++++++++++++++
include/configs/omap4_panda.h | 244
+-----------------------
include/configs/omap4_sdp4430.h | 245
+-----------------------
include/configs/tx25.h | 16 +-
include/status_led.h | 32 ++--
47 files changed, 916 insertions(+), 1019 deletions(-)
create mode 100644 include/configs/omap4_common.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-04 9:12 ` Albert ARIBAUD
@ 2011-09-04 9:17 ` Aneesh V
0 siblings, 0 replies; 261+ messages in thread
From: Aneesh V @ 2011-09-04 9:17 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Sunday 04 September 2011 02:42 PM, Albert ARIBAUD wrote:
> Le 04/09/2011 11:02, Aneesh V a ?crit :
>> Hi Albert,
>>
>> On Sunday 04 September 2011 02:31 PM, Albert ARIBAUD wrote:
>>> Le 04/09/2011 10:44, Aneesh V a ?crit :
>>>> Hi Albert,
>>>>
>>>> On Sunday 04 September 2011 12:56 AM, Albert ARIBAUD wrote:
>>>>> Hi Aneesh,
>>>>>
>>>>> Le 01/09/2011 10:59, Aneesh V a ?crit :
>>>>>> Hi Albert,
>>>>>>
>>>>>> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>>>>>>> Hi Woldfgang,
>>>>>> [snip ...]
>>>>>>> aneeshv (3):
>>>>>>
>>>>>> Wonder why my name is not appearing correctly. Looks like this has
>>>>>> started happening after I created a patchworks account with user-name
>>>>>> 'aneeshv'.
>>>>>
>>>>> Don't think so: patchwork does not change a thing to the patch author.
>>>>> Did you check the name and e-mail settings in your ~/.gitconfig or in
>>>>> the .git/config file under your U-Boot personal repo?
>>>>
>>>> I tried downloading one of those patches from the mailing list using
>>>> Mutt and it shows the author correctly. I will investigate this
>>>> further.
>>>>
>>>>>
>>>>> Do you want me to fix this in my repo before sending the pull request,
>>>>> and if so, what author name and e-mail should I put?
>>>>
>>>> That'll be great if you can do that while I try to fix my problem.
>>>> Following is how I prefer it.
>>>>
>>>> Aneesh V<aneesh@ti.com>
>>>>
>>>> But is it late already?
>>>
>>> <sigh> Wolfgang is probably going to want to kill me or at least
>>> maim me
>>> in interesting ways when I put the u-boot-arm/master pull req onl hold
>>> *again* :) but since he has not acked the latest one yet, I'll give it a
>>> shot, that should be fast.
>>
>> If it's too much trouble for you, I am just fine with it.
>
> As I said, that was fast: I made a temporary branch 't' (sorry, no
> imagination) which contains the same as my master but with your name
> hopefully fixed. Can you check
>
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=a238f7cca6ac2a319bd77fa40459a54c9105972a
>
>
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=280ddac35996eeb45a6768329335ad10e9fce448
>
>
> and
>
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=f9e6863149e6be493c29b1f8b052052eb840012d
>
>
> and confirm all is ok? Then I'll move master onto 't', remove 't' and
> send out the updated pull request.
>
Everything looks ok now. Thanks a lot.
BTW, I downloaded the patches again from patchworks(the ones marked
Accepted by you), everything seems to be fine. My name is correct. I
don't know what is going on!
best regards,
Aneesh
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-04 9:02 ` Aneesh V
@ 2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-04 9:12 UTC (permalink / raw)
To: u-boot
Le 04/09/2011 11:02, Aneesh V a ?crit :
> Hi Albert,
>
> On Sunday 04 September 2011 02:31 PM, Albert ARIBAUD wrote:
>> Le 04/09/2011 10:44, Aneesh V a ?crit :
>>> Hi Albert,
>>>
>>> On Sunday 04 September 2011 12:56 AM, Albert ARIBAUD wrote:
>>>> Hi Aneesh,
>>>>
>>>> Le 01/09/2011 10:59, Aneesh V a ?crit :
>>>>> Hi Albert,
>>>>>
>>>>> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>>>>>> Hi Woldfgang,
>>>>> [snip ...]
>>>>>> aneeshv (3):
>>>>>
>>>>> Wonder why my name is not appearing correctly. Looks like this has
>>>>> started happening after I created a patchworks account with user-name
>>>>> 'aneeshv'.
>>>>
>>>> Don't think so: patchwork does not change a thing to the patch author.
>>>> Did you check the name and e-mail settings in your ~/.gitconfig or in
>>>> the .git/config file under your U-Boot personal repo?
>>>
>>> I tried downloading one of those patches from the mailing list using
>>> Mutt and it shows the author correctly. I will investigate this
>>> further.
>>>
>>>>
>>>> Do you want me to fix this in my repo before sending the pull request,
>>>> and if so, what author name and e-mail should I put?
>>>
>>> That'll be great if you can do that while I try to fix my problem.
>>> Following is how I prefer it.
>>>
>>> Aneesh V<aneesh@ti.com>
>>>
>>> But is it late already?
>>
>> <sigh> Wolfgang is probably going to want to kill me or at least maim me
>> in interesting ways when I put the u-boot-arm/master pull req onl hold
>> *again* :) but since he has not acked the latest one yet, I'll give it a
>> shot, that should be fast.
>
> If it's too much trouble for you, I am just fine with it.
As I said, that was fast: I made a temporary branch 't' (sorry, no
imagination) which contains the same as my master but with your name
hopefully fixed. Can you check
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=a238f7cca6ac2a319bd77fa40459a54c9105972a
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=280ddac35996eeb45a6768329335ad10e9fce448
and
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=f9e6863149e6be493c29b1f8b052052eb840012d
and confirm all is ok? Then I'll move master onto 't', remove 't' and
send out the updated pull request.
> Thanks,
> Aneesh
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-04 9:01 ` Albert ARIBAUD
@ 2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Aneesh V @ 2011-09-04 9:02 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Sunday 04 September 2011 02:31 PM, Albert ARIBAUD wrote:
> Le 04/09/2011 10:44, Aneesh V a ?crit :
>> Hi Albert,
>>
>> On Sunday 04 September 2011 12:56 AM, Albert ARIBAUD wrote:
>>> Hi Aneesh,
>>>
>>> Le 01/09/2011 10:59, Aneesh V a ?crit :
>>>> Hi Albert,
>>>>
>>>> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>>>>> Hi Woldfgang,
>>>> [snip ...]
>>>>> aneeshv (3):
>>>>
>>>> Wonder why my name is not appearing correctly. Looks like this has
>>>> started happening after I created a patchworks account with user-name
>>>> 'aneeshv'.
>>>
>>> Don't think so: patchwork does not change a thing to the patch author.
>>> Did you check the name and e-mail settings in your ~/.gitconfig or in
>>> the .git/config file under your U-Boot personal repo?
>>
>> I tried downloading one of those patches from the mailing list using
>> Mutt and it shows the author correctly. I will investigate this
>> further.
>>
>>>
>>> Do you want me to fix this in my repo before sending the pull request,
>>> and if so, what author name and e-mail should I put?
>>
>> That'll be great if you can do that while I try to fix my problem.
>> Following is how I prefer it.
>>
>> Aneesh V<aneesh@ti.com>
>>
>> But is it late already?
>
> <sigh> Wolfgang is probably going to want to kill me or at least maim me
> in interesting ways when I put the u-boot-arm/master pull req onl hold
> *again* :) but since he has not acked the latest one yet, I'll give it a
> shot, that should be fast.
If it's too much trouble for you, I am just fine with it.
Thanks,
Aneesh
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-04 8:44 ` Aneesh V
@ 2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-04 9:01 UTC (permalink / raw)
To: u-boot
Le 04/09/2011 10:44, Aneesh V a ?crit :
> Hi Albert,
>
> On Sunday 04 September 2011 12:56 AM, Albert ARIBAUD wrote:
>> Hi Aneesh,
>>
>> Le 01/09/2011 10:59, Aneesh V a ?crit :
>>> Hi Albert,
>>>
>>> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>>>> Hi Woldfgang,
>>> [snip ...]
>>>> aneeshv (3):
>>>
>>> Wonder why my name is not appearing correctly. Looks like this has
>>> started happening after I created a patchworks account with user-name
>>> 'aneeshv'.
>>
>> Don't think so: patchwork does not change a thing to the patch author.
>> Did you check the name and e-mail settings in your ~/.gitconfig or in
>> the .git/config file under your U-Boot personal repo?
>
> I tried downloading one of those patches from the mailing list using
> Mutt and it shows the author correctly. I will investigate this
> further.
>
>>
>> Do you want me to fix this in my repo before sending the pull request,
>> and if so, what author name and e-mail should I put?
>
> That'll be great if you can do that while I try to fix my problem.
> Following is how I prefer it.
>
> Aneesh V<aneesh@ti.com>
>
> But is it late already?
<sigh> Wolfgang is probably going to want to kill me or at least maim me
in interesting ways when I put the u-boot-arm/master pull req onl hold
*again* :) but since he has not acked the latest one yet, I'll give it a
shot, that should be fast.
> br,
> Aneesh
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-03 19:26 ` Albert ARIBAUD
@ 2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Aneesh V @ 2011-09-04 8:44 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Sunday 04 September 2011 12:56 AM, Albert ARIBAUD wrote:
> Hi Aneesh,
>
> Le 01/09/2011 10:59, Aneesh V a ?crit :
>> Hi Albert,
>>
>> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>>> Hi Woldfgang,
>> [snip ...]
>>> aneeshv (3):
>>
>> Wonder why my name is not appearing correctly. Looks like this has
>> started happening after I created a patchworks account with user-name
>> 'aneeshv'.
>
> Don't think so: patchwork does not change a thing to the patch author.
> Did you check the name and e-mail settings in your ~/.gitconfig or in
> the .git/config file under your U-Boot personal repo?
I tried downloading one of those patches from the mailing list using
Mutt and it shows the author correctly. I will investigate this
further.
>
> Do you want me to fix this in my repo before sending the pull request,
> and if so, what author name and e-mail should I put?
That'll be great if you can do that while I try to fix my problem.
Following is how I prefer it.
Aneesh V <aneesh@ti.com>
But is it late already?
br,
Aneesh
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-09-01 8:59 ` Aneesh V
@ 2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-09-03 19:26 UTC (permalink / raw)
To: u-boot
Hi Aneesh,
Le 01/09/2011 10:59, Aneesh V a ?crit :
> Hi Albert,
>
> On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
>> Hi Woldfgang,
> [snip ...]
>> aneeshv (3):
>
> Wonder why my name is not appearing correctly. Looks like this has
> started happening after I created a patchworks account with user-name
> 'aneeshv'.
Don't think so: patchwork does not change a thing to the patch author.
Did you check the name and e-mail settings in your ~/.gitconfig or in
the .git/config file under your U-Boot personal repo?
Do you want me to fix this in my repo before sending the pull request,
and if so, what author name and e-mail should I put?
> I couldn't find a way to set 'display name' or something similar at
> patchworks. Any ideas on how to solve this problem?
>
>> omap: fix gpio related build breaks
>> omap4: fix build warning due to signed unsigned comparison
>> omap4: increase SRAM budget to fix build error
>
> You have not taken the following series. This will mean all the ARM
> boards that have not fixed the cache coherency issues will remain
> broken.
>
> http://patchwork.ozlabs.org/bundle/aneeshv/armv7-cache-fixes/
Applied to u-boot-arm/master, thanks.
> best regards,
> Aneesh
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
@ 2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Aneesh V @ 2011-09-01 8:59 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Wednesday 31 August 2011 03:43 PM, Albert ARIBAUD wrote:
> Hi Woldfgang,
[snip ...]
> aneeshv (3):
Wonder why my name is not appearing correctly. Looks like this has
started happening after I created a patchworks account with user-name
'aneeshv'.
I couldn't find a way to set 'display name' or something similar at
patchworks. Any ideas on how to solve this problem?
> omap: fix gpio related build breaks
> omap4: fix build warning due to signed unsigned comparison
> omap4: increase SRAM budget to fix build error
You have not taken the following series. This will mean all the ARM
boards that have not fixed the cache coherency issues will remain
broken.
http://patchwork.ozlabs.org/bundle/aneeshv/armv7-cache-fixes/
best regards,
Aneesh
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-08-31 10:13 Albert ARIBAUD
@ 2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
1 sibling, 0 replies; 261+ messages in thread
From: Marek Vasut @ 2011-08-31 11:57 UTC (permalink / raw)
To: u-boot
On Wednesday, August 31, 2011 12:13:22 PM Albert ARIBAUD wrote:
> Hi Woldfgang,
>
> The following changes since commit
> bd061a5214e60c9d1bb24393933323bd1a2dae19:
>
Hi Albert,
I think you forgot to pull u-boot-pxa pull request I sent you?
Cheers
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-08-31 10:13 UTC (permalink / raw)
To: u-boot
Hi Woldfgang,
The following changes since commit bd061a5214e60c9d1bb24393933323bd1a2dae19:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2011-08-26
15:55:03 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Anton Staaf (1):
mmc: S5P: Support DMA restarts at buffer boundaries
Asen Dimov (3):
pm9261: compiles with the AT91 reworked scheme
make pm9263 buildable for v2011.06 release
make pm9g45 buildable for v2011.06 release
Chander Kashyap (3):
SMDKV310: Fix build error for smdkv310 board
SMDKV310: Fix undefined reference error
SMDKV310: MMC SPL: Remove unwanted dummy functions
David Jander (1):
ARM: MX51: PLL errata workaround
Dirk Behme (3):
MAKEALL ARMv7: Use boards.cfg
SMDKV310: Fix host compilation of mkv310_image
mkimage: Fix 'Unknown OMAP image type - 5'
Fabio Estevam (1):
mx53: ddr3: Update DD3 initialization
Heiko Schocher (1):
arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
Igor Grinberg (3):
arm: nvidia and smdk6400: use common code for machine type
arm: omap: innovator: use common code for machine type
arm: fix bd pointer dereference prior initialization
Jason Liu (1):
mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
Linus Walleij (7):
integratorap: make the compile work again
integratorap: support relocation
integratorap: support the hush shell
integratorap: support some rudimentary commands
integratorap: remove hardcoded 32MB memory cmdline
integratorcp: make the board compile
integrator: convert to new build system
Matthias Fuchs (1):
at91: reworked support for meesc board
Matthias Weisser (1):
arm: lib: memcpy: Do not copy to same address
Reinhard Meyer (1):
AT91: fix at91sam9g45.h to include USB Host defines
Simon Glass (4):
Tegra2: Add microsecond timer function
Tegra2: Add more clock support
Tegra2: Add additional pin multiplexing features
Tegra2: Use clock and pinmux functions to simplify code
Stefano Babic (23):
MX31: removed warnings due to clock.h
ARM: versatilepb : drop warnings due to double definitions
MX35: MX35PDK: support additional RAM on CSD1
MX: MX35 / MX5: uniform clock command with powerpc
IMX: uniform GPIO interface using GPIO framework
MX25: make use of GPIO framework for MX25 processor
MX31: make use of GPIO framework for MX31 processor
MX5: make use of GPIO framework for MX5 processor
MX35: make use of GPIO framework for MX35 processor
MX31: QONG: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
MX31: mx31ads: make use of GPIO framework
MX31: imx31_litekit: make use of GPIO framework
IMX: scb9328: drop warnings
ARM: versatile: drop warnings
Thomas Petazzoni (4):
sbc35_a9g20: update board to the new AT91 organization
tny_a9260/tny_a9g20: update board to the new AT91 organization
atmel: update at91sam9m10g45 SoC support to new style
atmel: Update support of board AT91SAM9M10G45-EK to new style
Wolfgang Denk (16):
ARM: remove broken "assabet" board
ARM: remove broken "armadillo" board
ARM: remove broken "B2" board
ARM: remove broken "edb93xx" boards
ARM: remove broken "lpd7a40x" boards
ARM: remove broken "mx1fs2" board
ARM: remove broken "netstar" board
ARM: remove broken "sbc2410x" board
ARM: remove broken "smdk2400" board
ARM: remove broken "voiceblue" board
ARM: remove broken "at91cap9adk" board
ARM: remove broken "cmc_pu2" board
ARM: remove broken "csb637" board
ARM: remove broken "kb9202" board
ARM: remove broken "m501sk" board
ARM: remove broken "at91rm9200dk" board
aneeshv (3):
omap: fix gpio related build breaks
omap4: fix build warning due to signed unsigned comparison
omap4: increase SRAM budget to fix build error
?ukasz Majewski (2):
gpio:samsung s5p_ suffix add for GPIO functions
gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
MAINTAINERS | 14 -
MAKEALL | 69 +--
Makefile | 84 --
arch/arm/cpu/arm1136/mx35/generic.c | 4 +-
arch/arm/cpu/arm720t/cpu.c | 5 -
.../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 114 ++--
arch/arm/cpu/armv7/mx5/clock.c | 4 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 38 +
arch/arm/cpu/armv7/omap-common/gpio.c | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 2 +-
arch/arm/cpu/armv7/omap4/board.c | 2 +-
arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
arch/arm/cpu/armv7/tegra2/ap20.c | 91 +--
arch/arm/cpu/armv7/tegra2/clock.c | 158 ++++
.../led.c => arch/arm/cpu/armv7/tegra2/pinmux.c | 43 +-
arch/arm/cpu/armv7/tegra2/timer.c | 18 +-
arch/arm/include/asm/arch-at91/at91sam9g45.h | 16 +-
.../arm/include/asm/arch-at91/at91sam9g45_matrix.h | 194 ++---
.../arm/include/asm/arch-mx25/gpio.h | 42 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 12 -
arch/arm/include/asm/arch-mx31/clock.h | 2 +-
.../arm/include/asm/arch-mx31/gpio.h | 23 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 -
.../arm/include/asm/arch-mx35/gpio.h | 37 +-
.../arm/include/asm/arch-mx5/gpio.h | 23 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 12 +-
arch/arm/include/asm/arch-omap3/gpio.h | 50 ++
arch/arm/include/asm/arch-omap3/omap3.h | 8 -
arch/arm/include/asm/arch-omap4/clocks.h | 12 +-
arch/arm/include/asm/arch-omap4/gpio.h | 50 ++
arch/arm/include/asm/arch-omap4/omap4.h | 8 -
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 16 +-
arch/arm/include/asm/arch-s5pc2xx/gpio.h | 16 +-
arch/arm/include/asm/arch-tegra2/clk_rst.h | 127 ++--
arch/arm/include/asm/arch-tegra2/clock.h | 263 ++++++
arch/arm/include/asm/arch-tegra2/pinmux.h | 161 ++++-
.../arm/include/asm/arch-tegra2/timer.h | 22 +-
arch/arm/lib/board.c | 11 +-
arch/arm/lib/memcpy.S | 3 +
board/armadillo/Makefile | 55 --
board/armadillo/armadillo.c | 72 --
board/armadillo/config.mk | 29 -
board/armadillo/flash.c | 340 --------
board/armadillo/lowlevel_init.S | 66 --
board/armltd/integrator/integrator.c | 15 +-
board/armltd/integrator/lowlevel_init.S | 2 +-
board/armltd/integrator/split_by_variant.sh | 220 -----
board/armltd/versatile/versatile.c | 2 +-
board/assabet/Makefile | 53 --
board/assabet/assabet.c | 131 ---
board/assabet/config.mk | 7 -
board/assabet/setup.S | 136 ----
board/atmel/at91cap9adk/Makefile | 56 --
board/atmel/at91cap9adk/at91cap9adk.c | 352 --------
board/atmel/at91cap9adk/config.mk | 1 -
board/atmel/at91rm9200dk/Makefile | 56 --
board/atmel/at91rm9200dk/at91rm9200dk.c | 167 ----
board/atmel/at91rm9200dk/config.mk | 1 -
board/atmel/at91rm9200dk/flash.c | 504 ------------
board/atmel/at91rm9200dk/led.c | 80 --
board/atmel/at91rm9200dk/mux.c | 29 -
board/atmel/at91rm9200dk/partition.c | 40 -
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 115 ++--
board/atmel/at91sam9m10g45ek/led.c | 6 +-
board/calao/sbc35_a9g20/sbc35_a9g20.c | 88 +-
board/calao/tny_a9260/tny_a9260.c | 55 +-
board/cmc_pu2/Makefile | 50 --
board/cmc_pu2/cmc_pu2.c | 192 -----
board/cmc_pu2/config.mk | 3 -
board/cmc_pu2/flash.c | 469 -----------
board/cmc_pu2/load_sernum_ethaddr.c | 113 ---
board/csb637/Makefile | 50 --
board/csb637/config.mk | 1 -
board/csb637/csb637.c | 94 ---
board/dave/B2/B2.c | 139 ----
board/dave/B2/Makefile | 55 --
board/dave/B2/config.mk | 30 -
board/dave/B2/flash.c | 76 --
board/dave/B2/lowlevel_init.S | 167 ----
board/davedenx/qong/fpga.c | 10 +-
board/davedenx/qong/qong.c | 36 +-
board/edb93xx/Makefile | 50 --
board/edb93xx/config.mk | 33 -
board/edb93xx/edb93xx.c | 110 ---
board/edb93xx/pll_cfg.c | 58 --
board/edb93xx/pll_cfg.h | 72 --
board/edb93xx/sdram_cfg.c | 146 ----
board/edb93xx/sdram_cfg.h | 144 ----
board/efikamx/efikamx.c | 62 +-
board/esd/meesc/config.mk | 1 -
board/esd/meesc/meesc.c | 49 +-
board/freescale/mx35pdk/lowlevel_init.S | 9 +-
board/freescale/mx35pdk/mx35pdk.c | 22 +-
board/freescale/mx51evk/mx51evk.c | 18 +-
board/freescale/mx53ard/imximage_dd3.cfg | 6 +-
board/freescale/mx53ard/mx53ard.c | 8 +-
board/freescale/mx53evk/mx53evk.c | 6 +-
board/freescale/mx53loco/imximage.cfg | 6 +-
board/freescale/mx53loco/mx53loco.c | 6 +-
board/freescale/mx53smd/imximage.cfg | 6 +-
board/freescale/mx53smd/mx53smd.c | 4 +-
board/kb9202/Makefile | 53 --
board/kb9202/config.mk | 1 -
board/kb9202/kb9202.c | 107 ---
board/lpd7a40x/Makefile | 51 --
board/lpd7a40x/config.mk | 38 -
board/lpd7a40x/flash.c | 490 -----------
board/lpd7a40x/lowlevel_init.S | 212 -----
board/lpd7a40x/lpd7a40x.c | 93 ---
board/m501sk/Makefile | 50 --
board/m501sk/config.mk | 1 -
board/m501sk/eeprom.c | 102 ---
board/m501sk/m501sk.c | 203 -----
board/m501sk/m501sk.h | 167 ----
board/mx1fs2/Makefile | 51 --
board/mx1fs2/config.mk | 10 -
board/mx1fs2/flash.c | 849
--------------------
board/mx1fs2/intel.h | 99 ---
board/mx1fs2/lowlevel_init.S | 188 -----
board/mx1fs2/mx1fs2.c | 122 ---
board/netstar/Makefile | 95 ---
board/netstar/config.mk | 11 -
board/netstar/crcek.S | 241 ------
board/netstar/crcek.h | 3 -
board/netstar/crcit.c | 87 --
board/netstar/eeprom.c | 218 -----
board/netstar/netstar.c | 129 ---
board/netstar/setup.S | 284 -------
board/nvidia/common/board.c | 119 +--
board/pandora/pandora.c | 1 +
board/ronetix/pm9261/led.c | 9 +-
board/ronetix/pm9261/pm9261.c | 38 +-
board/ronetix/pm9263/led.c | 9 +-
board/ronetix/pm9263/pm9263.c | 42 +-
board/ronetix/pm9g45/pm9g45.c | 32 +-
board/samsung/goni/goni.c | 8 +-
board/samsung/smdk2400/Makefile | 51 --
board/samsung/smdk2400/config.mk | 25 -
board/samsung/smdk2400/flash.c | 492 ------------
board/samsung/smdk2400/lowlevel_init.S | 163 ----
board/samsung/smdk2400/smdk2400.c | 125 ---
board/samsung/smdk6400/smdk6400.c | 1 -
board/samsung/smdkc100/smdkc100.c | 2 +-
board/samsung/smdkv310/smdkv310.c | 10 +-
board/samsung/universal_c210/universal.c | 28 +-
board/sbc2410x/Makefile | 51 --
board/sbc2410x/config.mk | 23 -
board/sbc2410x/flash.c | 433 ----------
board/sbc2410x/lowlevel_init.S | 163 ----
board/sbc2410x/sbc2410x.c | 193 -----
board/scb9328/scb9328.c | 2 +-
board/syteco/zmx25/zmx25.c | 35 +-
board/ti/omap1610inn/omap1610innovator.c | 7 -
board/ttcontrol/vision2/vision2.c | 71 +-
board/voiceblue/Makefile | 74 --
board/voiceblue/config.mk | 1 -
board/voiceblue/eeprom.c | 218 -----
board/voiceblue/setup.S | 280 -------
board/voiceblue/voiceblue.c | 80 --
boards.cfg | 38 +-
doc/README.imx5 | 17 +
doc/README.scrapyard | 23 +
drivers/gpio/mxc_gpio.c | 51 ++-
drivers/gpio/s5p_gpio.c | 20 +-
drivers/mmc/s5p_mmc.c | 15 +-
drivers/spi/mxc_spi.c | 8 +-
include/configs/B2.h | 216 -----
include/configs/armadillo.h | 157 ----
include/configs/assabet.h | 173 ----
include/configs/at91cap9adk.h | 218 -----
include/configs/at91rm9200dk.h | 202 -----
include/configs/at91sam9m10g45ek.h | 193 ++---
include/configs/cmc_pu2.h | 238 ------
include/configs/csb637.h | 196 -----
include/configs/edb93xx.h | 269 -------
include/configs/efikamx.h | 2 -
include/configs/imx31_litekit.h | 1 +
include/configs/integratorap.h | 21 +-
include/configs/integratorcp.h | 8 +
include/configs/kb9202.h | 196 -----
include/configs/lpd7a400-10.h | 80 --
include/configs/lpd7a400.h | 117 ---
include/configs/lpd7a404-10.h | 80 --
include/configs/lpd7a404.h | 117 ---
include/configs/m501sk.h | 228 ------
include/configs/meesc.h | 202 +++--
include/configs/mx1fs2.h | 305 -------
include/configs/mx31ads.h | 1 +
include/configs/mx35pdk.h | 7 +-
include/configs/mx51evk.h | 3 +-
include/configs/mx53ard.h | 2 -
include/configs/mx53evk.h | 2 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 2 -
include/configs/netstar.h | 245 ------
include/configs/omap1610h2.h | 3 +-
include/configs/omap1610inn.h | 3 +-
include/configs/omap4_panda.h | 2 +-
include/configs/omap4_sdp4430.h | 2 +-
include/configs/pm9261.h | 18 +-
include/configs/pm9263.h | 17 +-
include/configs/pm9g45.h | 16 +-
include/configs/sbc2410x.h | 220 -----
include/configs/sbc35_a9g20.h | 87 +--
include/configs/smdk2400.h | 189 -----
include/configs/smdk6400.h | 2 +-
include/configs/tny_a9260.h | 85 +-
include/configs/versatile.h | 4 -
include/configs/vision2.h | 1 -
include/configs/voiceblue.h | 241 ------
mmc_spl/board/samsung/smdkv310/Makefile | 1 +
mmc_spl/board/samsung/smdkv310/mmc_boot.c | 28 +-
.../board/samsung/smdkv310/tools/mkv310_image.c | 1 +
mmc_spl/board/samsung/smdkv310/u-boot.lds | 2 +
tools/omapimage.c | 1 -
215 files changed, 2002 insertions(+), 16061 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/clock.c
rename board/atmel/at91cap9adk/led.c =>
arch/arm/cpu/armv7/tegra2/pinmux.c (56%)
rename include/mxc_gpio.h => arch/arm/include/asm/arch-mx25/gpio.h (59%)
copy board/edb93xx/early_udelay.h =>
arch/arm/include/asm/arch-mx31/gpio.h (67%)
rename board/atmel/at91cap9adk/partition.c =>
arch/arm/include/asm/arch-mx35/gpio.h (50%)
rename board/edb93xx/early_udelay.h =>
arch/arm/include/asm/arch-mx5/gpio.h (67%)
create mode 100644 arch/arm/include/asm/arch-omap3/gpio.h
create mode 100644 arch/arm/include/asm/arch-omap4/gpio.h
create mode 100644 arch/arm/include/asm/arch-tegra2/clock.h
rename board/edb93xx/flash_cfg.c =>
arch/arm/include/asm/arch-tegra2/timer.h (64%)
delete mode 100644 board/armadillo/Makefile
delete mode 100644 board/armadillo/armadillo.c
delete mode 100644 board/armadillo/config.mk
delete mode 100644 board/armadillo/flash.c
delete mode 100644 board/armadillo/lowlevel_init.S
delete mode 100755 board/armltd/integrator/split_by_variant.sh
delete mode 100644 board/assabet/Makefile
delete mode 100644 board/assabet/assabet.c
delete mode 100644 board/assabet/config.mk
delete mode 100644 board/assabet/setup.S
delete mode 100644 board/atmel/at91cap9adk/Makefile
delete mode 100644 board/atmel/at91cap9adk/at91cap9adk.c
delete mode 100644 board/atmel/at91cap9adk/config.mk
delete mode 100644 board/atmel/at91rm9200dk/Makefile
delete mode 100644 board/atmel/at91rm9200dk/at91rm9200dk.c
delete mode 100644 board/atmel/at91rm9200dk/config.mk
delete mode 100644 board/atmel/at91rm9200dk/flash.c
delete mode 100644 board/atmel/at91rm9200dk/led.c
delete mode 100644 board/atmel/at91rm9200dk/mux.c
delete mode 100644 board/atmel/at91rm9200dk/partition.c
delete mode 100644 board/cmc_pu2/Makefile
delete mode 100644 board/cmc_pu2/cmc_pu2.c
delete mode 100644 board/cmc_pu2/config.mk
delete mode 100644 board/cmc_pu2/flash.c
delete mode 100644 board/cmc_pu2/load_sernum_ethaddr.c
delete mode 100644 board/csb637/Makefile
delete mode 100644 board/csb637/config.mk
delete mode 100644 board/csb637/csb637.c
delete mode 100644 board/dave/B2/B2.c
delete mode 100644 board/dave/B2/Makefile
delete mode 100644 board/dave/B2/config.mk
delete mode 100644 board/dave/B2/flash.c
delete mode 100644 board/dave/B2/lowlevel_init.S
delete mode 100644 board/edb93xx/Makefile
delete mode 100644 board/edb93xx/config.mk
delete mode 100644 board/edb93xx/edb93xx.c
delete mode 100644 board/edb93xx/pll_cfg.c
delete mode 100644 board/edb93xx/pll_cfg.h
delete mode 100644 board/edb93xx/sdram_cfg.c
delete mode 100644 board/edb93xx/sdram_cfg.h
delete mode 100644 board/esd/meesc/config.mk
delete mode 100644 board/kb9202/Makefile
delete mode 100644 board/kb9202/config.mk
delete mode 100644 board/kb9202/kb9202.c
delete mode 100644 board/lpd7a40x/Makefile
delete mode 100644 board/lpd7a40x/config.mk
delete mode 100644 board/lpd7a40x/flash.c
delete mode 100644 board/lpd7a40x/lowlevel_init.S
delete mode 100644 board/lpd7a40x/lpd7a40x.c
delete mode 100644 board/m501sk/Makefile
delete mode 100644 board/m501sk/config.mk
delete mode 100644 board/m501sk/eeprom.c
delete mode 100644 board/m501sk/m501sk.c
delete mode 100644 board/m501sk/m501sk.h
delete mode 100644 board/mx1fs2/Makefile
delete mode 100644 board/mx1fs2/config.mk
delete mode 100644 board/mx1fs2/flash.c
delete mode 100644 board/mx1fs2/intel.h
delete mode 100644 board/mx1fs2/lowlevel_init.S
delete mode 100644 board/mx1fs2/mx1fs2.c
delete mode 100644 board/netstar/Makefile
delete mode 100644 board/netstar/config.mk
delete mode 100644 board/netstar/crcek.S
delete mode 100644 board/netstar/crcek.h
delete mode 100644 board/netstar/crcit.c
delete mode 100644 board/netstar/eeprom.c
delete mode 100644 board/netstar/netstar.c
delete mode 100644 board/netstar/setup.S
delete mode 100644 board/samsung/smdk2400/Makefile
delete mode 100644 board/samsung/smdk2400/config.mk
delete mode 100644 board/samsung/smdk2400/flash.c
delete mode 100644 board/samsung/smdk2400/lowlevel_init.S
delete mode 100644 board/samsung/smdk2400/smdk2400.c
delete mode 100644 board/sbc2410x/Makefile
delete mode 100644 board/sbc2410x/config.mk
delete mode 100644 board/sbc2410x/flash.c
delete mode 100644 board/sbc2410x/lowlevel_init.S
delete mode 100644 board/sbc2410x/sbc2410x.c
delete mode 100644 board/voiceblue/Makefile
delete mode 100644 board/voiceblue/config.mk
delete mode 100644 board/voiceblue/eeprom.c
delete mode 100644 board/voiceblue/setup.S
delete mode 100644 board/voiceblue/voiceblue.c
create mode 100644 doc/README.imx5
delete mode 100644 include/configs/B2.h
delete mode 100644 include/configs/armadillo.h
delete mode 100644 include/configs/assabet.h
delete mode 100644 include/configs/at91cap9adk.h
delete mode 100644 include/configs/at91rm9200dk.h
delete mode 100644 include/configs/cmc_pu2.h
delete mode 100644 include/configs/csb637.h
delete mode 100644 include/configs/edb93xx.h
delete mode 100644 include/configs/kb9202.h
delete mode 100644 include/configs/lpd7a400-10.h
delete mode 100644 include/configs/lpd7a400.h
delete mode 100644 include/configs/lpd7a404-10.h
delete mode 100644 include/configs/lpd7a404.h
delete mode 100644 include/configs/m501sk.h
delete mode 100644 include/configs/mx1fs2.h
delete mode 100644 include/configs/netstar.h
delete mode 100644 include/configs/sbc2410x.h
delete mode 100644 include/configs/smdk2400.h
delete mode 100644 include/configs/voiceblue.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-07-18 17:52 ` Albert ARIBAUD
@ 2011-08-12 8:21 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-08-12 8:21 UTC (permalink / raw)
To: u-boot
Hi Igor,
On 18/07/2011 19:52, Albert ARIBAUD wrote:
> Hi Igor,
>
>>> Igor Grinberg (1):
>>> arm: add CONFIG_MACH_TYPE setting and documentation
>>
>> hmm... no [2/3] and [3/3]... ?
>>
>> http://patchwork.ozlabs.org/patch/103048/
>> http://patchwork.ozlabs.org/patch/103047/
>>
>> When do you plan to pull these?
>
> Thanks for reminding me. I'll pull them in after I've applied the
> u-boot-ti/master branch.
>
> Amicalement,
Better late, they say... Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-08-04 12:28 Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-08-04 12:28 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Here is my pull request for u-boot-arm/master, from which I did remove
the wrongly applied commits that you indicated and in which all patches
submitted before the merge window closure are taken into account.
Developers, please direct complaints to me for any ARM-directed patches
submitted before the window closure, and which is not accounted for at
this point.
Still to apply are bugfix patches submitted after window closure as
well as the UTF-8 conversion patch and the ARM board removal patch.
The following changes since commit d50a8f45c9a640b3bcbd0ede91f83c8646cca018:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-08-02
22:39:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Andreas Bie?mann (8):
ARM: remove obsolete at91rm9200
MAKEALL: remove obsolete at91rm9200 soc
a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
README.at91-soc: remove AT91(RM9200) joining notice
net/eth.c: drop obsolete at91rm9200 support
README: fix arm920t/at91 path
a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
avr32: add grasshopper (ICnova AP7000) board
Aneesh V (15):
omap4: utility function to identify the context of hw init
omap4: cleanup pin mux data
omap4: add OMAP4430 revision check
omap4: add clock support
omap4: add sdram init support
omap4: calculate EMIF register values
omap4: automatic sdram detection
armv7: start.S: fixes and enhancements for SPL
omap: add basic SPL support
omap: add MMC and FAT support to SPL
omap4: add omap4460 revision detection
omap4: sdram init changes for omap4460
omap: reuse omap3 gpio support in omap4
omap4: support TPS programming
omap4: clock init support for omap4460
Asen Dimov (1):
AT91: change common at91sam9261 files to compile with new scheme
Chander Kashyap (1):
SMDKV310: MMC_SPL: Fix building when using "make O="
Christopher Harvey (1):
Removed unused define, CONFIG_ARMV7.
Dirk Behme (1):
ARMv7: u8500_href: Add missing header to fix compiler warning
Heiko Schocher (1):
cosmetic: arm: lib/board.c: Coding Style cleanup
John Rigby (1):
mkimage: Add OMAP boot image support
Laurence Withers (6):
DaVinci: rename gpio_defs.h to gpio.h
DA8xx: add generic GPIO driver
DaVinci EMAC: declare function for all DA8xx CPUs
DA8xx: add MMC/SD controller addresses
DA8xx: switch an enum to defines for consistency
DA8xx: fix LPSC constants
Matthias Weisser (1):
arm: auto gen asm-offsets.h for mb86r0x
Po-Yu Chuang (2):
arm: a320: fix multiline comment style
arm: a320: enable tagged list support
Reinhard Meyer (3):
AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
MAKEALL: remove AT91 boards that are in boards.cfg
AT91/SPI: fix atmel_dataflash_spi.c to allow building without
warnings
Sanjeev Premi (3):
omap3: Include array definition only when it is used
omap3evm: eth: split function setup_net_chip
omap3evm: eth: Include functions only when necessary
Shiraz Hashim (1):
spear: fix build errors for spear3xx/spear600 platforms
Sriramakrishnan (1):
omap3evm: Update ethernet reset sequence for Rev.G board
Stefano Babic (1):
ARM: versatile: fix board support
Thomas Abraham (1):
SMDKV310: Enable device tree support
Xu, Hong (6):
AT91: Makes AT91SAM9RL SoC build correctly against
u-boot-atmel/master
AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
AT91: SoC fix at91sam9261_matrix.h
AT91: Board fix for AT91SAM9261-EK
AT91: Makes AT91SAM9263 SoC build correctly against
u-boot-atmel/master
AT91: Makes AT91SAM9263-EK build correctly against
u-boot-atmel/master
MAINTAINERS | 1 +
MAKEALL | 7 -
Makefile | 63 -
README | 2 +-
arch/arm/cpu/arm920t/at91/reset.c | 4 -
arch/arm/cpu/arm920t/at91rm9200/bcm5221.c | 232 ----
arch/arm/cpu/arm920t/at91rm9200/dm9161.c | 225 ----
arch/arm/cpu/arm920t/at91rm9200/ether.c | 316 -----
arch/arm/cpu/arm920t/at91rm9200/i2c.c | 192 ---
arch/arm/cpu/arm920t/at91rm9200/ks8721.c | 249 ----
arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S | 169 ---
arch/arm/cpu/arm920t/at91rm9200/lxt972.c | 192 ---
arch/arm/cpu/arm920t/at91rm9200/reset.c | 71 --
arch/arm/cpu/arm920t/at91rm9200/spi.c | 152 ---
arch/arm/cpu/arm920t/at91rm9200/timer.c | 142 ---
arch/arm/cpu/arm920t/at91rm9200/usb.c | 53 -
arch/arm/cpu/arm920t/cpu.c | 4 -
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 +-
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 +-
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 74 +-
arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 2 +-
arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 2 +
arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c | 65 +
arch/arm/cpu/armv7/Makefile | 7 +-
arch/arm/cpu/armv7/cpu.c | 7 +
arch/arm/cpu/armv7/omap-common/Makefile | 6 +
arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c | 41 +-
arch/arm/cpu/armv7/omap-common/spl.c | 272 ++++
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 +
arch/arm/cpu/armv7/omap-common/utils.c | 57 +
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap3/board.c | 12 +
arch/arm/cpu/armv7/omap3/sys_info.c | 3 +
arch/arm/cpu/armv7/omap4/Makefile | 6 +
arch/arm/cpu/armv7/omap4/board.c | 180 +++-
arch/arm/cpu/armv7/omap4/clocks.c | 940 ++++++++++++++
.../panda => arch/arm/cpu/armv7/omap4}/config.mk | 25 +-
arch/arm/cpu/armv7/omap4/emif.c | 1310
++++++++++++++++++++
arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 +
arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++
arch/arm/cpu/armv7/omap4/sdram_elpida.c | 282 +++++
arch/arm/cpu/armv7/start.S | 50 +-
arch/arm/cpu/armv7/u-boot.lds | 2 +
arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
arch/arm/include/asm/arch-at91/at91sam9261.h | 3 +-
.../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +-
arch/arm/include/asm/arch-at91/at91sam9263.h | 13 +
.../arm/include/asm/arch-at91/at91sam9263_matrix.h | 146 +--
arch/arm/include/asm/arch-at91/at91sam9rl.h | 185 ++--
arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h | 121 +--
arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h | 812 ------------
arch/arm/include/asm/arch-at91rm9200/hardware.h | 75 --
arch/arm/include/asm/arch-davinci/davinci_misc.h | 2 +-
.../asm/arch-davinci/{gpio_defs.h => gpio.h} | 8 +
arch/arm/include/asm/arch-davinci/hardware.h | 102 +-
arch/arm/include/asm/arch-mb86r0x/asm-offsets.h | 74 --
arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 42 +
arch/arm/include/asm/arch-omap3/cpu.h | 26 +
arch/arm/include/asm/arch-omap4/clocks.h | 690 +++++++++++
arch/arm/include/asm/arch-omap4/cpu.h | 26 +
arch/arm/include/asm/arch-omap4/emif.h | 1040 ++++++++++++++++
arch/arm/include/asm/arch-omap4/mux_omap4.h | 1 +
arch/arm/include/asm/arch-omap4/omap4.h | 61 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 72 ++-
arch/arm/include/asm/armv7.h | 6 +
arch/arm/include/asm/omap_common.h | 56 +
.../include/asm/{arch-omap3/gpio.h => omap_gpio.h} | 27 +-
arch/arm/lib/board.c | 216 ++--
board/armltd/versatile/config.mk | 5 -
board/armltd/versatile/versatile.c | 10 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 136 ++-
board/atmel/at91sam9261ek/config.mk | 1 -
board/atmel/at91sam9261ek/led.c | 7 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 56 +-
board/atmel/at91sam9263ek/config.mk | 1 -
board/atmel/at91sam9263ek/led.c | 23 +-
board/atmel/at91sam9rlek/at91sam9rlek.c | 73 +-
board/atmel/at91sam9rlek/config.mk | 1 -
board/atmel/at91sam9rlek/led.c | 6 +-
board/davinci/dm355leopard/dm355leopard.c | 2 +-
board/davinci/dm365evm/dm365evm.c | 2 +-
.../in-circuit/grasshopper}/Makefile | 29 +-
board/in-circuit/grasshopper/grasshopper.c | 112 ++
board/spear/common/spr_misc.c | 10 +-
board/st-ericsson/u8500/u8500_href.c | 1 +
board/ti/evm/evm.c | 45 +-
board/ti/evm/evm.h | 1 +
board/ti/panda/Makefile | 2 +
board/ti/panda/panda.c | 25 +-
board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +-
board/ti/sdp4430/Makefile | 2 +
board/ti/sdp4430/config.mk | 31 -
board/ti/sdp4430/sdp.c | 25 +-
.../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +--
boards.cfg | 17 +
common/image.c | 6 +-
doc/README.at91-soc | 22 -
drivers/gpio/Makefile | 1 +
drivers/gpio/da8xx_gpio.c | 281 +++++
drivers/spi/atmel_dataflash_spi.c | 16 +-
drivers/usb/musb/da8xx.h | 2 +-
include/configs/a320evb.h | 34 +-
include/configs/am3517_crane.h | 1 -
include/configs/am3517_evm.h | 1 -
include/configs/at91sam9261ek.h | 133 ++-
include/configs/at91sam9263ek.h | 83 +-
include/configs/at91sam9rlek.h | 85 +-
include/configs/ca9x4_ct_vxp.h | 3 -
include/configs/cm_t35.h | 1 -
include/configs/devkit8000.h | 1 -
include/configs/dig297.h | 1 -
include/configs/grasshopper.h | 198 +++
include/configs/igep0020.h | 1 -
include/configs/igep0030.h | 1 -
include/configs/omap3_beagle.h | 1 -
include/configs/omap3_evm.h | 1 -
include/configs/omap3_overo.h | 1 -
include/configs/omap3_pandora.h | 1 -
include/configs/omap3_sdp3430.h | 1 -
include/configs/omap3_zoom1.h | 1 -
include/configs/omap3_zoom2.h | 1 -
include/configs/omap4_panda.h | 38 +-
include/configs/omap4_sdp4430.h | 38 +-
include/configs/s5p_goni.h | 1 -
include/configs/s5pc210_universal.h | 1 -
include/configs/smdkc100.h | 1 -
include/configs/smdkv310.h | 4 +-
include/configs/spear-common.h | 12 +
include/configs/versatile.h | 21 +-
include/image.h | 1 +
mmc_spl/board/samsung/smdkv310/Makefile | 12 +-
net/eth.c | 4 -
spl/Makefile | 6 +
tools/Makefile | 2 +
tools/mkimage.c | 2 +
tools/mkimage.h | 1 +
tools/omap/clocks_get_m_n.c | 197 +++
tools/omapimage.c | 224 ++++
tools/omapimage.h | 50 +
140 files changed, 7628 insertions(+), 4278 deletions(-)
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c
delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/usb.c
create mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c
rename arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c (76%)
create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c
create mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
create mode 100644 arch/arm/cpu/armv7/omap-common/utils.c
create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c
rename {board/ti/panda => arch/arm/cpu/armv7/omap4}/config.mk (64%)
create mode 100644 arch/arm/cpu/armv7/omap4/emif.c
create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c
delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h
rename arch/arm/include/asm/arch-davinci/{gpio_defs.h => gpio.h} (90%)
delete mode 100644 arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h
create mode 100644 arch/arm/include/asm/arch-omap4/emif.h
create mode 100644 arch/arm/include/asm/omap_common.h
rename arch/arm/include/asm/{arch-omap3/gpio.h => omap_gpio.h} (67%)
delete mode 100644 board/armltd/versatile/config.mk
delete mode 100644 board/atmel/at91sam9261ek/config.mk
delete mode 100644 board/atmel/at91sam9263ek/config.mk
delete mode 100644 board/atmel/at91sam9rlek/config.mk
rename {arch/arm/cpu/arm920t/at91rm9200 =>
board/in-circuit/grasshopper}/Makefile (73%)
create mode 100644 board/in-circuit/grasshopper/grasshopper.c
rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%)
delete mode 100644 board/ti/sdp4430/config.mk
rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%)
create mode 100644 drivers/gpio/da8xx_gpio.c
create mode 100644 include/configs/grasshopper.h
create mode 100644 tools/omap/clocks_get_m_n.c
create mode 100644 tools/omapimage.c
create mode 100644 tools/omapimage.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
@ 2011-07-18 19:17 ` Wolfgang Denk
1 sibling, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-07-18 19:17 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E243772.9030908@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
>
> powerpc/85xx: Add default usb mode and phy type to hwconfig
> (2011-07-11 13:24:21 -0500)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Albert ARIBAUD (1):
> Remove volatile qualifier in get_ram_size() calls
>
> Chan-Taek Park (1):
> TI: TNETV107X Fix Build Error
>
> David Jander (1):
> ARM: MX5: Fix broken leftover TO-2 errata workaround
>
> Fabio Estevam (2):
> mx31pdk: cosmetic: Fix line over 80 characters
> mx27: Make the UART port number explicit
>
> Graeme Russ (1):
> Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
>
> Igor Grinberg (1):
> arm: add CONFIG_MACH_TYPE setting and documentation
>
> Jana Rapava (2):
> EfikaMX: Use correct imximage.cfg
> EfikaMX: Add missing CONFIG_SYS_TEXT_BASE
>
> Marek Vasut (1):
> EfikaMX: Enable EXT2 booting
>
> Matthias Weisser (7):
> build: Add targets for auto gen of asm-offsets.h and use it in imx35
> imx: Add get_tbclk() function for imx25
> imx: Use correct imx25 reset.c
> imx: Add support for USB EHCI on imx25
> imx: Add auto generation of asm-offsets.h for imx25
> imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
> imx: Add support for zmx25 board
>
> Rob Herring (2):
> arm: add __ilog2 function
> ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7
>
> Stefano Babic (3):
> MX5: Update to autogenerated asm-offsets.h
> MX27: Update to autogenerated asm-offsets.h
> MX31: Cleanup clock function
>
> Torsten Koschorrek (2):
> ARM: Update maintainer of board scb9328
> scb9328: Add ARM relocation support
>
> Yegor Yefremov (1):
> am3517evm: change console device from ttyS2 to ttyO2
>
> MAINTAINERS | 7 +-
> README | 10 ++
> arch/arm/cpu/arm1136/mx31/generic.c | 21 +++-
> arch/arm/cpu/arm1136/mx35/Makefile | 11 --
> arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +-
> arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++
> arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++
> arch/arm/cpu/arm926ejs/mx27/Makefile | 2 +
> arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++
> arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/orion5x/dram.c | 4 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +
> arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 +-
> arch/arm/cpu/armv7/start.S | 2 +
> arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++-
> arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++
> arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 --
> arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx31/clock.h | 11 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 -------
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
> arch/arm/include/asm/bitops.h | 5 +
> arch/arm/lib/board.c | 4 +
> board/BuS/eb_cpux9k2/cpux9k2.c | 2 +-
> board/armadillo/flash.c | 6 +-
> board/atmel/at91rm9200dk/flash.c | 10 +-
> board/atmel/at91rm9200ek/at91rm9200ek.c | 2 +-
> board/cerf250/flash.c | 14 +-
> board/cm4008/flash.c | 10 +-
> board/cm41xx/flash.c | 10 +-
> board/cmc_pu2/flash.c | 11 +-
> board/cradle/flash.c | 10 +-
> board/csb226/flash.c | 10 +-
> board/davedenx/qong/qong.c | 2 +-
> board/davinci/common/misc.c | 2 +-
> board/dnp1110/flash.c | 14 +-
> board/efikamx/efikamx.c | 2 +-
> board/ep7312/flash.c | 10 +-
> board/eukrea/cpu9260/cpu9260.c | 2 +-
> board/eukrea/cpuat91/cpuat91.c | 2 +-
> board/freescale/mx31ads/mx31ads.c | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/freescale/mx53ard/mx53ard.c | 4 +-
> board/freescale/mx53evk/mx53evk.c | 2 +-
> board/freescale/mx53loco/mx53loco.c | 4 +-
> board/freescale/mx53smd/mx53smd.c | 4 +-
> board/gcplus/flash.c | 14 +-
> board/impa7/flash.c | 10 +-
> board/imx31_phycore/imx31_phycore.c | 2 +-
> board/innokom/flash.c | 10 +-
> board/karo/tx25/tx25.c | 32 ++--
> board/keymile/km_arm/km_arm.c | 2 +-
> board/lart/flash.c | 10 +-
> board/logicpd/imx27lite/imx27lite.c | 8 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 2 +-
> board/lpd7a40x/flash.c | 10 +-
> board/lubbock/flash.c | 14 +-
> board/modnet50/flash.c | 14 +-
> board/mx1ads/mx1ads.c | 2 +-
> board/mx1ads/syncflash.c | 2 +-
> board/ns9750dev/flash.c | 15 +-
> board/pleb2/flash.c | 18 +-
> board/ronetix/pm9261/pm9261.c | 2 +-
> board/ronetix/pm9263/pm9263.c | 2 +-
> board/ronetix/pm9g45/pm9g45.c | 2 +-
> board/samsung/smdk2400/flash.c | 10 +-
> board/sbc2410x/flash.c | 10 +-
> board/scb9328/config.mk | 10 --
> board/scb9328/flash.c | 5 +-
> board/scb9328/scb9328.c | 24 +--
> board/shannon/flash.c | 10 +-
> board/syteco/jadecpu/jadecpu.c | 2 +-
> board/syteco/zmx25/Makefile | 51 +++++++
> board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++
> board/syteco/zmx25/zmx25.c | 203
> ++++++++++++++++++++++++++
> board/ti/omap1610inn/flash.c | 15 +-
> board/ti/omap730p2/flash.c | 15 +-
> board/xaeniax/flash.c | 14 +-
> board/xm250/flash.c | 23 ++--
> board/zylonite/flash.c | 14 +-
> boards.cfg | 3 +-
> common/memsize.c | 2 +-
> drivers/mtd/spi/eeprom_m95xxx.c | 5 +-
> drivers/net/fec_mxc.c | 6 +-
> drivers/net/netarm_eth.c | 12 +-
> drivers/spi/mxc_spi.c | 2 -
> drivers/usb/host/ehci-mxc.c | 33 +++-
> include/common.h | 2 +-
> include/configs/am3517_evm.h | 2 +-
> include/configs/efikamx.h | 3 +
> include/configs/mx31pdk.h | 6 +-
> include/configs/scb9328.h | 5 +
> include/configs/tnetv107x_evm.h | 6 +
> include/configs/zmx25.h | 180
> +++++++++++++++++++++++
> include/mxc_gpio.h | 5 +
> rules.mk | 10 ++
> 99 files changed, 1242 insertions(+), 360 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c
> create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c
> create mode 100644 arch/arm/include/asm/arch-mx25/macro.h
> delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h
> delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h
> delete mode 100644 board/scb9328/config.mk
> create mode 100644 board/syteco/zmx25/Makefile
> create mode 100644 board/syteco/zmx25/lowlevel_init.S
> create mode 100644 board/syteco/zmx25/zmx25.c
> create mode 100644 include/configs/zmx25.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I know engineers. They love to change things. - Dr. McCoy
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-07-18 14:31 ` Igor Grinberg
@ 2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 17:52 UTC (permalink / raw)
To: u-boot
Hi Igor,
>> Igor Grinberg (1):
>> arm: add CONFIG_MACH_TYPE setting and documentation
>
> hmm... no [2/3] and [3/3]... ?
>
> http://patchwork.ozlabs.org/patch/103048/
> http://patchwork.ozlabs.org/patch/103047/
>
> When do you plan to pull these?
Thanks for reminding me. I'll pull them in after I've applied the
u-boot-ti/master branch.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-07-18 13:38 Albert ARIBAUD
@ 2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
1 sibling, 1 reply; 261+ messages in thread
From: Igor Grinberg @ 2011-07-18 14:31 UTC (permalink / raw)
To: u-boot
Hi Albert,
On 07/18/11 16:38, Albert ARIBAUD wrote:
> Igor Grinberg (1):
> arm: add CONFIG_MACH_TYPE setting and documentation
hmm... no [2/3] and [3/3]... ?
http://patchwork.ozlabs.org/patch/103048/
http://patchwork.ozlabs.org/patch/103047/
When do you plan to pull these?
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 19:17 ` Wolfgang Denk
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 13:38 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
powerpc/85xx: Add default usb mode and phy type to hwconfig
(2011-07-11 13:24:21 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert ARIBAUD (1):
Remove volatile qualifier in get_ram_size() calls
Chan-Taek Park (1):
TI: TNETV107X Fix Build Error
David Jander (1):
ARM: MX5: Fix broken leftover TO-2 errata workaround
Fabio Estevam (2):
mx31pdk: cosmetic: Fix line over 80 characters
mx27: Make the UART port number explicit
Graeme Russ (1):
Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
Igor Grinberg (1):
arm: add CONFIG_MACH_TYPE setting and documentation
Jana Rapava (2):
EfikaMX: Use correct imximage.cfg
EfikaMX: Add missing CONFIG_SYS_TEXT_BASE
Marek Vasut (1):
EfikaMX: Enable EXT2 booting
Matthias Weisser (7):
build: Add targets for auto gen of asm-offsets.h and use it in imx35
imx: Add get_tbclk() function for imx25
imx: Use correct imx25 reset.c
imx: Add support for USB EHCI on imx25
imx: Add auto generation of asm-offsets.h for imx25
imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
imx: Add support for zmx25 board
Rob Herring (2):
arm: add __ilog2 function
ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7
Stefano Babic (3):
MX5: Update to autogenerated asm-offsets.h
MX27: Update to autogenerated asm-offsets.h
MX31: Cleanup clock function
Torsten Koschorrek (2):
ARM: Update maintainer of board scb9328
scb9328: Add ARM relocation support
Yegor Yefremov (1):
am3517evm: change console device from ttyS2 to ttyO2
MAINTAINERS | 7 +-
README | 10 ++
arch/arm/cpu/arm1136/mx31/generic.c | 21 +++-
arch/arm/cpu/arm1136/mx35/Makefile | 11 --
arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +-
arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++
arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++
arch/arm/cpu/arm926ejs/mx27/Makefile | 2 +
arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++
arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
arch/arm/cpu/arm926ejs/orion5x/dram.c | 4 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +
arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 +-
arch/arm/cpu/armv7/start.S | 2 +
arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++-
arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++
arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 --
arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx31/clock.h | 11 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 -------
arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
arch/arm/include/asm/bitops.h | 5 +
arch/arm/lib/board.c | 4 +
board/BuS/eb_cpux9k2/cpux9k2.c | 2 +-
board/armadillo/flash.c | 6 +-
board/atmel/at91rm9200dk/flash.c | 10 +-
board/atmel/at91rm9200ek/at91rm9200ek.c | 2 +-
board/cerf250/flash.c | 14 +-
board/cm4008/flash.c | 10 +-
board/cm41xx/flash.c | 10 +-
board/cmc_pu2/flash.c | 11 +-
board/cradle/flash.c | 10 +-
board/csb226/flash.c | 10 +-
board/davedenx/qong/qong.c | 2 +-
board/davinci/common/misc.c | 2 +-
board/dnp1110/flash.c | 14 +-
board/efikamx/efikamx.c | 2 +-
board/ep7312/flash.c | 10 +-
board/eukrea/cpu9260/cpu9260.c | 2 +-
board/eukrea/cpuat91/cpuat91.c | 2 +-
board/freescale/mx31ads/mx31ads.c | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 2 +-
board/freescale/mx51evk/mx51evk.c | 2 +-
board/freescale/mx53ard/mx53ard.c | 4 +-
board/freescale/mx53evk/mx53evk.c | 2 +-
board/freescale/mx53loco/mx53loco.c | 4 +-
board/freescale/mx53smd/mx53smd.c | 4 +-
board/gcplus/flash.c | 14 +-
board/impa7/flash.c | 10 +-
board/imx31_phycore/imx31_phycore.c | 2 +-
board/innokom/flash.c | 10 +-
board/karo/tx25/tx25.c | 32 ++--
board/keymile/km_arm/km_arm.c | 2 +-
board/lart/flash.c | 10 +-
board/logicpd/imx27lite/imx27lite.c | 8 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 2 +-
board/lpd7a40x/flash.c | 10 +-
board/lubbock/flash.c | 14 +-
board/modnet50/flash.c | 14 +-
board/mx1ads/mx1ads.c | 2 +-
board/mx1ads/syncflash.c | 2 +-
board/ns9750dev/flash.c | 15 +-
board/pleb2/flash.c | 18 +-
board/ronetix/pm9261/pm9261.c | 2 +-
board/ronetix/pm9263/pm9263.c | 2 +-
board/ronetix/pm9g45/pm9g45.c | 2 +-
board/samsung/smdk2400/flash.c | 10 +-
board/sbc2410x/flash.c | 10 +-
board/scb9328/config.mk | 10 --
board/scb9328/flash.c | 5 +-
board/scb9328/scb9328.c | 24 +--
board/shannon/flash.c | 10 +-
board/syteco/jadecpu/jadecpu.c | 2 +-
board/syteco/zmx25/Makefile | 51 +++++++
board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++
board/syteco/zmx25/zmx25.c | 203
++++++++++++++++++++++++++
board/ti/omap1610inn/flash.c | 15 +-
board/ti/omap730p2/flash.c | 15 +-
board/xaeniax/flash.c | 14 +-
board/xm250/flash.c | 23 ++--
board/zylonite/flash.c | 14 +-
boards.cfg | 3 +-
common/memsize.c | 2 +-
drivers/mtd/spi/eeprom_m95xxx.c | 5 +-
drivers/net/fec_mxc.c | 6 +-
drivers/net/netarm_eth.c | 12 +-
drivers/spi/mxc_spi.c | 2 -
drivers/usb/host/ehci-mxc.c | 33 +++-
include/common.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/efikamx.h | 3 +
include/configs/mx31pdk.h | 6 +-
include/configs/scb9328.h | 5 +
include/configs/tnetv107x_evm.h | 6 +
include/configs/zmx25.h | 180
+++++++++++++++++++++++
include/mxc_gpio.h | 5 +
rules.mk | 10 ++
99 files changed, 1242 insertions(+), 360 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c
create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c
create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c
create mode 100644 arch/arm/include/asm/arch-mx25/macro.h
delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h
delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h
delete mode 100644 board/scb9328/config.mk
create mode 100644 board/syteco/zmx25/Makefile
create mode 100644 board/syteco/zmx25/lowlevel_init.S
create mode 100644 board/syteco/zmx25/zmx25.c
create mode 100644 include/configs/zmx25.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-07-04 9:08 Albert ARIBAUD
@ 2011-07-04 22:32 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-07-04 22:32 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E1182F8.2010409@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit ff6b47ad23365964f7d75f8878f17388a024dc8d:
>
> Makefile: need to remove generated u-boot-nand_spl.lds (2011-07-01
> 15:58:46 -0500)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Andreas Bie?mann (9):
> at91rm9200.h: fix ATMEL_PMX_AA_TXD2
> arm920t/at91: add clock.c
> arm920t/at91: use new clock.c features
> arm920t/at91: add at91rm9200_devices.c
> at91rm9200ek: use atmel_usart
> eb_cpux9k2: use atmel_usart
> cpuat91: use atmel_usart
> driver/serial: delete at91rm9200_usart
> atstk100x: switch to common cfi driver
>
> Aneesh V (9):
> arm: make default implementation of cache_flush() weakly linked
> armv7: cache maintenance operations for armv7
> armv7: rename cache related CONFIG flags
> armv7: integrate cache maintenance support
> arm: minor fixes for cache and mmu handling
> armv7: add PL310 support to u-boot
> armv7: adapt omap4 to the new cache maintenance framework
> armv7: adapt omap3 to the new cache maintenance framework
> armv7: adapt s5pc1xx to the new cache maintenance framework
>
> David M?ller (ELSOFT AG) (3):
> VCMA9: remove unneeded config.mk
> VCMA9: use CFI driver (and remove the old one)
> VCMA9: various cleanups/code style fixes
>
> Fabio Estevam (5):
> MX5: Make the weim structure complete
> MX5: Add iomux structure
> MX5: Introduce a function for setting the chip select size
> MX53: Add initial support for MX53ARD
> vision2: Fix build due to WEIM registers name change
>
> Holger Brunck (4):
> arm/kirkwood: if CONFIG_SOFT_I2C is set don't set CONFIG_I2C_MVTWSI
> arm/km: fix u-boot.kwb build breakage
> arm/km: remove unneeded define
> arm/km: replace suenx targets with km_kirkwood
>
> Igor Grinberg (1):
> arm: omap2: apollon: fix broken build
>
> Jens Scharsig (1):
> Fix compiler error for cpu at91sam9, if lowlevel init is enabled
>
> John Rigby (1):
> OMAP[34]: fix broken timer
>
> Matthias Weisser (1):
> arm: Update jadecpu board
>
> Simon Guinot (1):
> Add support for Network Space v2 and parents
>
> Tom Warren (2):
> GPIO: Tegra2: add GPIO driver for Tegra2
> arm: Tegra2: GPIO: enable GPIO for Tegra2 boards
>
> Valentin Longchamp (3):
> arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS
> arm/km: ethernet support for mgcoge3un
> arm/km: add support for portl2 board
>
> MAINTAINERS | 14 +-
> MAKEALL | 3 +-
> README | 11 +
> arch/arm/cpu/arm1136/start.S | 4 +-
> arch/arm/cpu/arm920t/at91/Makefile | 3 +
> arch/arm/cpu/arm920t/at91/at91rm9200_devices.c | 85 ++++
> arch/arm/cpu/arm920t/at91/clock.c | 160 +++++++
> arch/arm/cpu/arm920t/at91/cpu.c | 43 ++
> arch/arm/cpu/arm926ejs/at91/clock.c | 35 +--
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/cache_v7.c | 394 ++++++++++++++++
> arch/arm/cpu/armv7/cpu.c | 50 +--
> arch/arm/cpu/armv7/mx5/soc.c | 30 ++
> arch/arm/cpu/armv7/omap-common/timer.c | 7 +-
> arch/arm/cpu/armv7/omap3/Makefile | 1 -
> arch/arm/cpu/armv7/omap3/board.c | 136 +++++-
> arch/arm/cpu/armv7/omap3/cache.S | 263 -----------
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 32 ++
> arch/arm/cpu/armv7/omap4/board.c | 12 +
> arch/arm/cpu/armv7/omap4/lowlevel_init.S | 9 +
> arch/arm/cpu/armv7/s5pc1xx/cache.S | 88 +----
> arch/arm/cpu/armv7/start.S | 18 +-
> arch/arm/include/asm/arch-at91/at91rm9200.h | 12 +-
> arch/arm/include/asm/arch-at91/at91sam9_sdramc.h | 2 +-
> arch/arm/include/asm/arch-at91/clk.h | 42 ++-
> arch/arm/include/asm/arch-kirkwood/config.h | 2 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 159 ++++++-
> arch/arm/include/asm/arch-mx5/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-omap3/omap3.h | 20 +
> arch/arm/include/asm/arch-omap3/sys_proto.h | 10 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
> arch/arm/include/asm/arch-s5pc1xx/sys_proto.h | 3 -
> arch/arm/include/asm/arch-tegra2/gpio.h | 250 ++++++++++-
> arch/arm/include/asm/armv7.h | 67 +++
> arch/arm/include/asm/global_data.h | 2 +-
> arch/arm/include/asm/gpio.h | 38 ++
> arch/arm/include/asm/pl310.h | 73 +++
> arch/arm/include/asm/utils.h | 56 +++
> arch/arm/lib/Makefile | 3 +-
> arch/arm/lib/board.c | 8 +-
> arch/arm/lib/cache-cp15.c | 22 +-
> arch/arm/lib/cache-pl310.c | 115 +++++
> arch/arm/lib/cache.c | 20 +-
> board/BuS/eb_cpux9k2/cpux9k2.c | 7 +
> board/LaCie/netspace_v2/Makefile | 49 ++
> board/LaCie/netspace_v2/kwbimage.cfg | 162 +++++++
> board/LaCie/netspace_v2/netspace_v2.c | 142 ++++++
> board/LaCie/netspace_v2/netspace_v2.h | 42 ++
> board/armltd/integrator/split_by_variant.sh | 8 +-
> board/atmel/at91rm9200ek/at91rm9200ek.c | 7 +
> board/atmel/atstk1000/Makefile | 1 -
> board/atmel/atstk1000/flash.c | 232 ---------
> board/eukrea/cpuat91/cpuat91.c | 8 +
> board/freescale/mx53ard/Makefile | 48 ++
> board/freescale/mx53ard/imximage_dd3.cfg | 96 ++++
> board/freescale/mx53ard/mx53ard.c | 306 ++++++++++++
> board/keymile/km_arm/km_arm.c | 45 ++-
> board/mpl/vcma9/Makefile | 4 +-
> board/mpl/vcma9/cmd_vcma9.c | 56 +--
> board/mpl/vcma9/config.mk | 24 -
> board/mpl/vcma9/flash.c | 432 -----------------
> board/mpl/vcma9/lowlevel_init.S | 549
> +++++++++++++++++-----
> board/mpl/vcma9/vcma9.c | 284 +++--------
> board/mpl/vcma9/vcma9.h | 121 +----
> board/syteco/jadecpu/config.mk | 1 -
> board/syteco/jadecpu/jadecpu.c | 5 +-
> board/ttcontrol/vision2/vision2.c | 10 +-
> boards.cfg | 9 +-
> common/cmd_bdinfo.c | 2 +-
> drivers/gpio/Makefile | 1 +
> drivers/gpio/tegra2_gpio.c | 255 ++++++++++
> drivers/serial/Makefile | 1 -
> drivers/serial/at91rm9200_usart.c | 126 -----
> include/common.h | 5 +-
> include/configs/B2.h | 3 +-
> include/configs/VCMA9.h | 249 +++++-----
> include/configs/apollon.h | 4 +
> include/configs/assabet.h | 2 +-
> include/configs/at91rm9200ek.h | 10 +-
> include/configs/atstk1002.h | 9 +-
> include/configs/atstk1003.h | 9 +-
> include/configs/atstk1004.h | 9 +-
> include/configs/atstk1006.h | 9 +-
> include/configs/ca9x4_ct_vxp.h | 2 +-
> include/configs/cerf250.h | 2 +-
> include/configs/cpuat91.h | 12 +-
> include/configs/cradle.h | 2 +-
> include/configs/csb226.h | 2 +-
> include/configs/dnp1110.h | 2 +-
> include/configs/eb_cpux9k2.h | 10 +-
> include/configs/efikamx.h | 2 +-
> include/configs/evb4510.h | 3 +-
> include/configs/gcplus.h | 2 +-
> include/configs/innokom.h | 2 +-
> include/configs/jadecpu.h | 24 +-
> include/configs/jornada.h | 2 +-
> include/configs/km/km_arm.h | 32 +-
> include/configs/{suen3.h => km_kirkwood.h} | 18 +-
> include/configs/lart.h | 2 +-
> include/configs/lubbock.h | 2 +-
> include/configs/mgcoge3un.h | 6 +
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53ard.h | 198 ++++++++
> include/configs/mx53evk.h | 2 +-
> include/configs/netspace_v2.h | 162 +++++++
> include/configs/omap4_panda.h | 8 +-
> include/configs/omap4_sdp4430.h | 8 +-
> include/configs/pleb2.h | 2 +-
> include/configs/portl2.h | 81 ++++
> include/configs/pxa255_idp.h | 2 +-
> include/configs/s5pc210_universal.h | 2 +-
> include/configs/shannon.h | 2 +-
> include/configs/suen8.h | 50 --
> include/configs/tegra2-common.h | 4 +-
> include/configs/trizepsiv.h | 2 +-
> include/configs/vision2.h | 2 +-
> include/configs/xaeniax.h | 2 +-
> include/configs/xm250.h | 2 +-
> include/configs/zylonite.h | 2 +-
> 119 files changed, 4218 insertions(+), 2092 deletions(-)
> create mode 100644 arch/arm/cpu/arm920t/at91/at91rm9200_devices.c
> create mode 100644 arch/arm/cpu/arm920t/at91/clock.c
> create mode 100644 arch/arm/cpu/arm920t/at91/cpu.c
> create mode 100644 arch/arm/cpu/armv7/cache_v7.c
> delete mode 100644 arch/arm/cpu/armv7/omap3/cache.S
> create mode 100644 arch/arm/include/asm/armv7.h
> create mode 100644 arch/arm/include/asm/gpio.h
> create mode 100644 arch/arm/include/asm/pl310.h
> create mode 100644 arch/arm/include/asm/utils.h
> create mode 100644 arch/arm/lib/cache-pl310.c
> create mode 100644 board/LaCie/netspace_v2/Makefile
> create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg
> create mode 100644 board/LaCie/netspace_v2/netspace_v2.c
> create mode 100644 board/LaCie/netspace_v2/netspace_v2.h
> delete mode 100644 board/atmel/atstk1000/flash.c
> create mode 100644 board/freescale/mx53ard/Makefile
> create mode 100644 board/freescale/mx53ard/imximage_dd3.cfg
> create mode 100644 board/freescale/mx53ard/mx53ard.c
> delete mode 100644 board/mpl/vcma9/config.mk
> delete mode 100644 board/mpl/vcma9/flash.c
> delete mode 100644 board/syteco/jadecpu/config.mk
> create mode 100644 drivers/gpio/tegra2_gpio.c
> delete mode 100644 drivers/serial/at91rm9200_usart.c
> rename include/configs/{suen3.h => km_kirkwood.h} (77%)
> create mode 100644 include/configs/mx53ard.h
> create mode 100644 include/configs/netspace_v2.h
> create mode 100644 include/configs/portl2.h
> delete mode 100644 include/configs/suen8.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You know that feeling when you're leaning back on a stool and it
starts to tip over? Well, that's how I feel all the time.
- Steven Wright
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-07-04 9:08 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit ff6b47ad23365964f7d75f8878f17388a024dc8d:
Makefile: need to remove generated u-boot-nand_spl.lds (2011-07-01
15:58:46 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Andreas Bie?mann (9):
at91rm9200.h: fix ATMEL_PMX_AA_TXD2
arm920t/at91: add clock.c
arm920t/at91: use new clock.c features
arm920t/at91: add at91rm9200_devices.c
at91rm9200ek: use atmel_usart
eb_cpux9k2: use atmel_usart
cpuat91: use atmel_usart
driver/serial: delete at91rm9200_usart
atstk100x: switch to common cfi driver
Aneesh V (9):
arm: make default implementation of cache_flush() weakly linked
armv7: cache maintenance operations for armv7
armv7: rename cache related CONFIG flags
armv7: integrate cache maintenance support
arm: minor fixes for cache and mmu handling
armv7: add PL310 support to u-boot
armv7: adapt omap4 to the new cache maintenance framework
armv7: adapt omap3 to the new cache maintenance framework
armv7: adapt s5pc1xx to the new cache maintenance framework
David M?ller (ELSOFT AG) (3):
VCMA9: remove unneeded config.mk
VCMA9: use CFI driver (and remove the old one)
VCMA9: various cleanups/code style fixes
Fabio Estevam (5):
MX5: Make the weim structure complete
MX5: Add iomux structure
MX5: Introduce a function for setting the chip select size
MX53: Add initial support for MX53ARD
vision2: Fix build due to WEIM registers name change
Holger Brunck (4):
arm/kirkwood: if CONFIG_SOFT_I2C is set don't set CONFIG_I2C_MVTWSI
arm/km: fix u-boot.kwb build breakage
arm/km: remove unneeded define
arm/km: replace suenx targets with km_kirkwood
Igor Grinberg (1):
arm: omap2: apollon: fix broken build
Jens Scharsig (1):
Fix compiler error for cpu at91sam9, if lowlevel init is enabled
John Rigby (1):
OMAP[34]: fix broken timer
Matthias Weisser (1):
arm: Update jadecpu board
Simon Guinot (1):
Add support for Network Space v2 and parents
Tom Warren (2):
GPIO: Tegra2: add GPIO driver for Tegra2
arm: Tegra2: GPIO: enable GPIO for Tegra2 boards
Valentin Longchamp (3):
arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS
arm/km: ethernet support for mgcoge3un
arm/km: add support for portl2 board
MAINTAINERS | 14 +-
MAKEALL | 3 +-
README | 11 +
arch/arm/cpu/arm1136/start.S | 4 +-
arch/arm/cpu/arm920t/at91/Makefile | 3 +
arch/arm/cpu/arm920t/at91/at91rm9200_devices.c | 85 ++++
arch/arm/cpu/arm920t/at91/clock.c | 160 +++++++
arch/arm/cpu/arm920t/at91/cpu.c | 43 ++
arch/arm/cpu/arm926ejs/at91/clock.c | 35 +--
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/cache_v7.c | 394 ++++++++++++++++
arch/arm/cpu/armv7/cpu.c | 50 +--
arch/arm/cpu/armv7/mx5/soc.c | 30 ++
arch/arm/cpu/armv7/omap-common/timer.c | 7 +-
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap3/board.c | 136 +++++-
arch/arm/cpu/armv7/omap3/cache.S | 263 -----------
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 32 ++
arch/arm/cpu/armv7/omap4/board.c | 12 +
arch/arm/cpu/armv7/omap4/lowlevel_init.S | 9 +
arch/arm/cpu/armv7/s5pc1xx/cache.S | 88 +----
arch/arm/cpu/armv7/start.S | 18 +-
arch/arm/include/asm/arch-at91/at91rm9200.h | 12 +-
arch/arm/include/asm/arch-at91/at91sam9_sdramc.h | 2 +-
arch/arm/include/asm/arch-at91/clk.h | 42 ++-
arch/arm/include/asm/arch-kirkwood/config.h | 2 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 159 ++++++-
arch/arm/include/asm/arch-mx5/sys_proto.h | 2 +-
arch/arm/include/asm/arch-omap3/omap3.h | 20 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 10 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
arch/arm/include/asm/arch-s5pc1xx/sys_proto.h | 3 -
arch/arm/include/asm/arch-tegra2/gpio.h | 250 ++++++++++-
arch/arm/include/asm/armv7.h | 67 +++
arch/arm/include/asm/global_data.h | 2 +-
arch/arm/include/asm/gpio.h | 38 ++
arch/arm/include/asm/pl310.h | 73 +++
arch/arm/include/asm/utils.h | 56 +++
arch/arm/lib/Makefile | 3 +-
arch/arm/lib/board.c | 8 +-
arch/arm/lib/cache-cp15.c | 22 +-
arch/arm/lib/cache-pl310.c | 115 +++++
arch/arm/lib/cache.c | 20 +-
board/BuS/eb_cpux9k2/cpux9k2.c | 7 +
board/LaCie/netspace_v2/Makefile | 49 ++
board/LaCie/netspace_v2/kwbimage.cfg | 162 +++++++
board/LaCie/netspace_v2/netspace_v2.c | 142 ++++++
board/LaCie/netspace_v2/netspace_v2.h | 42 ++
board/armltd/integrator/split_by_variant.sh | 8 +-
board/atmel/at91rm9200ek/at91rm9200ek.c | 7 +
board/atmel/atstk1000/Makefile | 1 -
board/atmel/atstk1000/flash.c | 232 ---------
board/eukrea/cpuat91/cpuat91.c | 8 +
board/freescale/mx53ard/Makefile | 48 ++
board/freescale/mx53ard/imximage_dd3.cfg | 96 ++++
board/freescale/mx53ard/mx53ard.c | 306 ++++++++++++
board/keymile/km_arm/km_arm.c | 45 ++-
board/mpl/vcma9/Makefile | 4 +-
board/mpl/vcma9/cmd_vcma9.c | 56 +--
board/mpl/vcma9/config.mk | 24 -
board/mpl/vcma9/flash.c | 432 -----------------
board/mpl/vcma9/lowlevel_init.S | 549
+++++++++++++++++-----
board/mpl/vcma9/vcma9.c | 284 +++--------
board/mpl/vcma9/vcma9.h | 121 +----
board/syteco/jadecpu/config.mk | 1 -
board/syteco/jadecpu/jadecpu.c | 5 +-
board/ttcontrol/vision2/vision2.c | 10 +-
boards.cfg | 9 +-
common/cmd_bdinfo.c | 2 +-
drivers/gpio/Makefile | 1 +
drivers/gpio/tegra2_gpio.c | 255 ++++++++++
drivers/serial/Makefile | 1 -
drivers/serial/at91rm9200_usart.c | 126 -----
include/common.h | 5 +-
include/configs/B2.h | 3 +-
include/configs/VCMA9.h | 249 +++++-----
include/configs/apollon.h | 4 +
include/configs/assabet.h | 2 +-
include/configs/at91rm9200ek.h | 10 +-
include/configs/atstk1002.h | 9 +-
include/configs/atstk1003.h | 9 +-
include/configs/atstk1004.h | 9 +-
include/configs/atstk1006.h | 9 +-
include/configs/ca9x4_ct_vxp.h | 2 +-
include/configs/cerf250.h | 2 +-
include/configs/cpuat91.h | 12 +-
include/configs/cradle.h | 2 +-
include/configs/csb226.h | 2 +-
include/configs/dnp1110.h | 2 +-
include/configs/eb_cpux9k2.h | 10 +-
include/configs/efikamx.h | 2 +-
include/configs/evb4510.h | 3 +-
include/configs/gcplus.h | 2 +-
include/configs/innokom.h | 2 +-
include/configs/jadecpu.h | 24 +-
include/configs/jornada.h | 2 +-
include/configs/km/km_arm.h | 32 +-
include/configs/{suen3.h => km_kirkwood.h} | 18 +-
include/configs/lart.h | 2 +-
include/configs/lubbock.h | 2 +-
include/configs/mgcoge3un.h | 6 +
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 198 ++++++++
include/configs/mx53evk.h | 2 +-
include/configs/netspace_v2.h | 162 +++++++
include/configs/omap4_panda.h | 8 +-
include/configs/omap4_sdp4430.h | 8 +-
include/configs/pleb2.h | 2 +-
include/configs/portl2.h | 81 ++++
include/configs/pxa255_idp.h | 2 +-
include/configs/s5pc210_universal.h | 2 +-
include/configs/shannon.h | 2 +-
include/configs/suen8.h | 50 --
include/configs/tegra2-common.h | 4 +-
include/configs/trizepsiv.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/xaeniax.h | 2 +-
include/configs/xm250.h | 2 +-
include/configs/zylonite.h | 2 +-
119 files changed, 4218 insertions(+), 2092 deletions(-)
create mode 100644 arch/arm/cpu/arm920t/at91/at91rm9200_devices.c
create mode 100644 arch/arm/cpu/arm920t/at91/clock.c
create mode 100644 arch/arm/cpu/arm920t/at91/cpu.c
create mode 100644 arch/arm/cpu/armv7/cache_v7.c
delete mode 100644 arch/arm/cpu/armv7/omap3/cache.S
create mode 100644 arch/arm/include/asm/armv7.h
create mode 100644 arch/arm/include/asm/gpio.h
create mode 100644 arch/arm/include/asm/pl310.h
create mode 100644 arch/arm/include/asm/utils.h
create mode 100644 arch/arm/lib/cache-pl310.c
create mode 100644 board/LaCie/netspace_v2/Makefile
create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg
create mode 100644 board/LaCie/netspace_v2/netspace_v2.c
create mode 100644 board/LaCie/netspace_v2/netspace_v2.h
delete mode 100644 board/atmel/atstk1000/flash.c
create mode 100644 board/freescale/mx53ard/Makefile
create mode 100644 board/freescale/mx53ard/imximage_dd3.cfg
create mode 100644 board/freescale/mx53ard/mx53ard.c
delete mode 100644 board/mpl/vcma9/config.mk
delete mode 100644 board/mpl/vcma9/flash.c
delete mode 100644 board/syteco/jadecpu/config.mk
create mode 100644 drivers/gpio/tegra2_gpio.c
delete mode 100644 drivers/serial/at91rm9200_usart.c
rename include/configs/{suen3.h => km_kirkwood.h} (77%)
create mode 100644 include/configs/mx53ard.h
create mode 100644 include/configs/netspace_v2.h
create mode 100644 include/configs/portl2.h
delete mode 100644 include/configs/suen8.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-30 6:24 Albert ARIBAUD
@ 2011-06-30 11:15 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-30 11:15 UTC (permalink / raw)
To: u-boot
Wolfgang,
Le 30/06/2011 08:24, Albert ARIBAUD a ?crit :
> Wolfgang,
>
> The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a:
>
> Prepare v2011.06 (2011-06-27 22:22:42 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
Please disregard. I have added new commits and am re-issuing a pull
request. Apologies for the inconvenience.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-30 6:24 UTC (permalink / raw)
To: u-boot
Wolfgang,
The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a:
Prepare v2011.06 (2011-06-27 22:22:42 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Aneesh V (9):
arm: make default implementation of cache_flush() weakly linked
armv7: cache maintenance operations for armv7
armv7: rename cache related CONFIG flags
armv7: integrate cache maintenance support
arm: minor fixes for cache and mmu handling
armv7: add PL310 support to u-boot
armv7: adapt omap4 to the new cache maintenance framework
armv7: adapt omap3 to the new cache maintenance framework
armv7: adapt s5pc1xx to the new cache maintenance framework
David M?ller (ELSOFT AG) (3):
VCMA9: remove unneeded config.mk
VCMA9: use CFI driver (and remove the old one)
VCMA9: various cleanups/code style fixes
Igor Grinberg (1):
arm: omap2: apollon: fix broken build
John Rigby (1):
OMAP[34]: fix broken timer
Matthias Weisser (1):
arm: Update jadecpu board
Tom Warren (2):
GPIO: Tegra2: add GPIO driver for Tegra2
arm: Tegra2: GPIO: enable GPIO for Tegra2 boards
README | 11 +
arch/arm/cpu/arm1136/start.S | 4 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/cache_v7.c | 394 ++++++++++++++++++
arch/arm/cpu/armv7/cpu.c | 50 +--
arch/arm/cpu/armv7/omap-common/timer.c | 7 +-
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap3/board.c | 136 ++++++-
arch/arm/cpu/armv7/omap3/cache.S | 263 ------------
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 32 ++
arch/arm/cpu/armv7/omap4/board.c | 12 +
arch/arm/cpu/armv7/omap4/lowlevel_init.S | 9 +
arch/arm/cpu/armv7/s5pc1xx/cache.S | 88 +----
arch/arm/cpu/armv7/start.S | 18 +-
arch/arm/include/asm/arch-omap3/omap3.h | 20 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 10 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
arch/arm/include/asm/arch-s5pc1xx/sys_proto.h | 3 -
arch/arm/include/asm/arch-tegra2/gpio.h | 250 +++++++++++-
arch/arm/include/asm/armv7.h | 67 +++
arch/arm/include/asm/global_data.h | 2 +-
arch/arm/include/asm/gpio.h | 38 ++
arch/arm/include/asm/pl310.h | 73 ++++
arch/arm/include/asm/utils.h | 56 +++
arch/arm/lib/Makefile | 3 +-
arch/arm/lib/board.c | 8 +-
arch/arm/lib/cache-cp15.c | 22 +-
arch/arm/lib/cache-pl310.c | 115 +++++
arch/arm/lib/cache.c | 20 +-
board/armltd/integrator/split_by_variant.sh | 8 +-
board/mpl/vcma9/Makefile | 4 +-
board/mpl/vcma9/cmd_vcma9.c | 56 +---
board/mpl/vcma9/config.mk | 24 --
board/mpl/vcma9/flash.c | 432 -------------------
board/mpl/vcma9/lowlevel_init.S | 549
+++++++++++++++++++------
board/mpl/vcma9/vcma9.c | 284 ++++----------
board/mpl/vcma9/vcma9.h | 121 +-----
board/syteco/jadecpu/config.mk | 1 -
board/syteco/jadecpu/jadecpu.c | 5 +-
common/cmd_bdinfo.c | 2 +-
drivers/gpio/Makefile | 1 +
drivers/gpio/tegra2_gpio.c | 255 ++++++++++++
include/common.h | 5 +-
include/configs/B2.h | 3 +-
include/configs/VCMA9.h | 249 ++++++------
include/configs/apollon.h | 4 +
include/configs/assabet.h | 2 +-
include/configs/ca9x4_ct_vxp.h | 2 +-
include/configs/cerf250.h | 2 +-
include/configs/cradle.h | 2 +-
include/configs/csb226.h | 2 +-
include/configs/dnp1110.h | 2 +-
include/configs/efikamx.h | 2 +-
include/configs/evb4510.h | 3 +-
include/configs/gcplus.h | 2 +-
include/configs/innokom.h | 2 +-
include/configs/jadecpu.h | 24 +-
include/configs/jornada.h | 2 +-
include/configs/lart.h | 2 +-
include/configs/lubbock.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/omap4_panda.h | 8 +-
include/configs/omap4_sdp4430.h | 8 +-
include/configs/pleb2.h | 2 +-
include/configs/pxa255_idp.h | 2 +-
include/configs/s5pc210_universal.h | 2 +-
include/configs/shannon.h | 2 +-
include/configs/tegra2-common.h | 4 +-
include/configs/trizepsiv.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/xaeniax.h | 2 +-
include/configs/xm250.h | 2 +-
include/configs/zylonite.h | 2 +-
74 files changed, 2263 insertions(+), 1549 deletions(-)
create mode 100644 arch/arm/cpu/armv7/cache_v7.c
delete mode 100644 arch/arm/cpu/armv7/omap3/cache.S
create mode 100644 arch/arm/include/asm/armv7.h
create mode 100644 arch/arm/include/asm/gpio.h
create mode 100644 arch/arm/include/asm/pl310.h
create mode 100644 arch/arm/include/asm/utils.h
create mode 100644 arch/arm/lib/cache-pl310.c
delete mode 100644 board/mpl/vcma9/config.mk
delete mode 100644 board/mpl/vcma9/flash.c
delete mode 100644 board/syteco/jadecpu/config.mk
create mode 100644 drivers/gpio/tegra2_gpio.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-29 6:09 ` Albert ARIBAUD
@ 2011-06-29 21:09 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-29 21:09 UTC (permalink / raw)
To: u-boot
Dear Albert,
In message <4E0AC19D.9070606@aribaud.net> you wrote:
>
> Please disregard this pull request. As it came too late for 2011-06,
OK.
> I'll re-issue it after I have merged in my current 'next' branch and the
> patches Igor has mentioned, as soon as the merge window is announced.
The merge window is open.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The evolution of the human race will not be accomplished in the ten
thousand years of tame animals, but in the million years of wild
animals, because man is and will always be a wild animal.
- Charles Galton Darwin
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
@ 2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
1 sibling, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-29 6:09 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
Le 28/06/2011 07:39, Albert ARIBAUD a ?crit :
> Hi Wolfgang,
>
> The following changes since commit 9623c158f6a5150a21c25026bfba79e7ff7912f5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-23
> 15:37:33 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Aneesh V (9):
Please disregard this pull request. As it came too late for 2011-06,
I'll re-issue it after I have merged in my current 'next' branch and the
patches Igor has mentioned, as soon as the merge window is announced.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-28 10:20 ` Igor Grinberg
@ 2011-06-28 21:19 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-28 21:19 UTC (permalink / raw)
To: u-boot
Hi Igor,
Le 28/06/2011 12:20, Igor Grinberg a ?crit :
> On 06/28/11 12:52, Igor Grinberg wrote:
>
>> Hi Albert,
>>
>>
>>
>> On 06/28/11 08:39, Albert ARIBAUD wrote:
>>
>>> Hi Wolfgang,
>>>
>>> The following changes since commit 9623c158f6a5150a21c25026bfba79e7ff7912f5:
>>>
>>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-23
>>> 15:37:33 +0200)
>>>
>>> are available in the git repository at:
>>>
>>> git://git.denx.de/u-boot-arm.git master
>>>
>>> Aneesh V (9):
>>> arm: make default implementation of cache_flush() weakly linked
>>> armv7: cache maintenance operations for armv7
>>> armv7: rename cache related CONFIG flags
>>> armv7: integrate cache maintenance support
>>> arm: minor fixes for cache and mmu handling
>>> armv7: add PL310 support to u-boot
>>> armv7: adapt omap4 to the new cache maintenance framework
>>> armv7: adapt omap3 to the new cache maintenance framework
>>> armv7: adapt s5pc1xx to the new cache maintenance framework
>> Can these two also be added for 2011.06:
>>
>> OMAP[34]: fix broken timer:
>> http://patchwork.ozlabs.org/patch/76803/
>>
>> arm: omap2: apollon: fix broken build:
>> http://patchwork.ozlabs.org/patch/101877/
>>
>> ?
>
> Errr, I've just seen 2011.06 already released a couple of hours ago...
> I guess it is too late now...
>
> Still, I would be glad if those get into this merge window...
Of course I'll add them into u-boot-arm/master along with the current
content of my 'next' branch.
> Thanks anyway
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
@ 2011-06-28 10:48 ` Wolfgang Denk
1 sibling, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-28 10:48 UTC (permalink / raw)
To: u-boot
Dear Igor Grinberg,
In message <4E09A476.3010304@compulab.co.il> you wrote:
>
> Can these two also be added for 2011.06:
No, they cannot. v2011.06 was released yesterday, according to
schedule. I just need to write the summary message...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Remember thee Ay, thou poor ghost while memory holds a seat In this
distracted globe. Remember thee! Yea, from the table of my memory
I'll wipe away all trivial fond records, All saws of books, all
forms, all pressures past, That youth and observation copied there.
Hamlet, I : v : 95 William Shakespeare
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-28 9:52 ` Igor Grinberg
@ 2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
1 sibling, 1 reply; 261+ messages in thread
From: Igor Grinberg @ 2011-06-28 10:20 UTC (permalink / raw)
To: u-boot
On 06/28/11 12:52, Igor Grinberg wrote:
> Hi Albert,
>
>
>
> On 06/28/11 08:39, Albert ARIBAUD wrote:
>
>> Hi Wolfgang,
>>
>> The following changes since commit 9623c158f6a5150a21c25026bfba79e7ff7912f5:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-23
>> 15:37:33 +0200)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm.git master
>>
>> Aneesh V (9):
>> arm: make default implementation of cache_flush() weakly linked
>> armv7: cache maintenance operations for armv7
>> armv7: rename cache related CONFIG flags
>> armv7: integrate cache maintenance support
>> arm: minor fixes for cache and mmu handling
>> armv7: add PL310 support to u-boot
>> armv7: adapt omap4 to the new cache maintenance framework
>> armv7: adapt omap3 to the new cache maintenance framework
>> armv7: adapt s5pc1xx to the new cache maintenance framework
> Can these two also be added for 2011.06:
>
> OMAP[34]: fix broken timer:
> http://patchwork.ozlabs.org/patch/76803/
>
> arm: omap2: apollon: fix broken build:
> http://patchwork.ozlabs.org/patch/101877/
>
> ?
Errr, I've just seen 2011.06 already released a couple of hours ago...
I guess it is too late now...
Still, I would be glad if those get into this merge window...
Thanks anyway
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-28 5:39 Albert ARIBAUD
@ 2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
1 sibling, 2 replies; 261+ messages in thread
From: Igor Grinberg @ 2011-06-28 9:52 UTC (permalink / raw)
To: u-boot
Hi Albert,
On 06/28/11 08:39, Albert ARIBAUD wrote:
> Hi Wolfgang,
>
> The following changes since commit 9623c158f6a5150a21c25026bfba79e7ff7912f5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-23
> 15:37:33 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Aneesh V (9):
> arm: make default implementation of cache_flush() weakly linked
> armv7: cache maintenance operations for armv7
> armv7: rename cache related CONFIG flags
> armv7: integrate cache maintenance support
> arm: minor fixes for cache and mmu handling
> armv7: add PL310 support to u-boot
> armv7: adapt omap4 to the new cache maintenance framework
> armv7: adapt omap3 to the new cache maintenance framework
> armv7: adapt s5pc1xx to the new cache maintenance framework
Can these two also be added for 2011.06:
OMAP[34]: fix broken timer:
http://patchwork.ozlabs.org/patch/76803/
arm: omap2: apollon: fix broken build:
http://patchwork.ozlabs.org/patch/101877/
?
Thanks
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-29 6:09 ` Albert ARIBAUD
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-28 5:39 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 9623c158f6a5150a21c25026bfba79e7ff7912f5:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-23
15:37:33 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Aneesh V (9):
arm: make default implementation of cache_flush() weakly linked
armv7: cache maintenance operations for armv7
armv7: rename cache related CONFIG flags
armv7: integrate cache maintenance support
arm: minor fixes for cache and mmu handling
armv7: add PL310 support to u-boot
armv7: adapt omap4 to the new cache maintenance framework
armv7: adapt omap3 to the new cache maintenance framework
armv7: adapt s5pc1xx to the new cache maintenance framework
README | 11 +
arch/arm/cpu/arm1136/start.S | 4 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/cache_v7.c | 394
+++++++++++++++++++++++++
arch/arm/cpu/armv7/cpu.c | 50 ++--
arch/arm/cpu/armv7/omap3/Makefile | 1 -
arch/arm/cpu/armv7/omap3/board.c | 136 ++++++++--
arch/arm/cpu/armv7/omap3/cache.S | 263 -----------------
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 32 ++
arch/arm/cpu/armv7/omap4/board.c | 12 +
arch/arm/cpu/armv7/omap4/lowlevel_init.S | 9 +
arch/arm/cpu/armv7/s5pc1xx/cache.S | 88 +-----
arch/arm/cpu/armv7/start.S | 18 +-
arch/arm/include/asm/arch-omap3/omap3.h | 20 ++
arch/arm/include/asm/arch-omap3/sys_proto.h | 10 +-
arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +-
arch/arm/include/asm/arch-s5pc1xx/sys_proto.h | 3 -
arch/arm/include/asm/armv7.h | 67 +++++
arch/arm/include/asm/global_data.h | 2 +-
arch/arm/include/asm/pl310.h | 73 +++++
arch/arm/include/asm/utils.h | 56 ++++
arch/arm/lib/Makefile | 3 +-
arch/arm/lib/board.c | 8 +-
arch/arm/lib/cache-cp15.c | 22 +-
arch/arm/lib/cache-pl310.c | 115 +++++++
arch/arm/lib/cache.c | 20 +-
board/armltd/integrator/split_by_variant.sh | 8 +-
common/cmd_bdinfo.c | 2 +-
include/common.h | 5 +-
include/configs/B2.h | 3 +-
include/configs/assabet.h | 2 +-
include/configs/ca9x4_ct_vxp.h | 2 +-
include/configs/cerf250.h | 2 +-
include/configs/cradle.h | 2 +-
include/configs/csb226.h | 2 +-
include/configs/dnp1110.h | 2 +-
include/configs/efikamx.h | 2 +-
include/configs/evb4510.h | 3 +-
include/configs/gcplus.h | 2 +-
include/configs/innokom.h | 2 +-
include/configs/jornada.h | 2 +-
include/configs/lart.h | 2 +-
include/configs/lubbock.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/omap4_panda.h | 8 +-
include/configs/omap4_sdp4430.h | 8 +-
include/configs/pleb2.h | 2 +-
include/configs/pxa255_idp.h | 2 +-
include/configs/s5pc210_universal.h | 2 +-
include/configs/shannon.h | 2 +-
include/configs/tegra2-common.h | 2 +-
include/configs/trizepsiv.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/xaeniax.h | 2 +-
include/configs/xm250.h | 2 +-
include/configs/zylonite.h | 2 +-
57 files changed, 1048 insertions(+), 458 deletions(-)
create mode 100644 arch/arm/cpu/armv7/cache_v7.c
delete mode 100644 arch/arm/cpu/armv7/omap3/cache.S
create mode 100644 arch/arm/include/asm/armv7.h
create mode 100644 arch/arm/include/asm/pl310.h
create mode 100644 arch/arm/include/asm/utils.h
create mode 100644 arch/arm/lib/cache-pl310.c
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-22 12:18 ` Wolfgang Denk
@ 2011-06-22 13:51 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-22 13:51 UTC (permalink / raw)
To: u-boot
Le 22/06/2011 14:18, Wolfgang Denk a ?crit :
> Dear Albert ARIBAUD,
>
> In message<4E00FF02.4040105@aribaud.net> you wrote:
>>
>> The following changes since commit 29b83d983392fcb5378b915ee2112bb48b8c05be:
>
> May I ask why for example my patch to remove the broken trab board has
> not been included:
>
> 05/01 To:u-boot at lists.d [PATCH] ARM: drop unsupported 'trab' board
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/98977
>
>
> Is it OK with you that I pull this directly?
>
> Best regards,
>
> Wolfgang Denk
Hi wolfgang,
Yes, it is.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
@ 2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
1 sibling, 1 reply; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-22 12:18 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E00FF02.4040105@aribaud.net> you wrote:
>
> The following changes since commit 29b83d983392fcb5378b915ee2112bb48b8c05be:
May I ask why for example my patch to remove the broken trab board has
not been included:
05/01 To:u-boot at lists.d [PATCH] ARM: drop unsupported 'trab' board
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/98977
Is it OK with you that I pull this directly?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I can call spirits from the vasty deep."
"Why so can I, or so can any man; but will they come when you do call
for them?" - Shakespeare, 1 King Henry IV, Act III, Scene I.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-21 20:28 Albert ARIBAUD
@ 2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
1 sibling, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-22 9:17 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E00FF02.4040105@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 29b83d983392fcb5378b915ee2112bb48b8c05be:
>
> powerpc/p1022ds: set the clock-frequency prop only if the clock is
> enabled (2011-06-09 15:53:38 -0500)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Aneesh V (6):
> omap1610h2: fix build breaks
> omap5912osk: fix build breaks
> omap1510inn: fix build breaks
> omap1610inn: fix build breaks
> omap2420h4: fix build breaks
> omap730p2: fix build breaks
>
> Eric Benard (4):
> arm926ejs/at91/lowlevel_init.S: fix defines
> cpu9260/9G20: fix board support
> cpuat91: fix board support
> include/asm/arch-at91: update several .h files to ATMEL_xxx name
> scheme
>
> Fabio Estevam (3):
> mx1ads: Fix build by using new relocation scheme
> imx31_phycore: Fix build by using new relocation scheme
> mx31pdk: Add DHCP command
>
> Helmut Raiger (1):
> mxc_spi.c: typo fixed
>
> Jens Scharsig (1):
> update arm/at91rm9200 work with rework rework110202
>
> Reinhard Meyer (3):
> AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:
> AT91 rework: fix TOP9000 files to build again
> ATMEL spi_dataflash driver - fix to build again
>
> Ryan Mallon (1):
> Add support for Bluewater Systems Snapper 9260/9G20 modules
>
> Sergey Lapin (1):
> Build fix/update of AFEB9260
>
> Stefano Babic (1):
> MX31: QONG: drop config.mk
>
> andreas.devel at googlemail.com (2):
> at91_emac: fix compile warning
> macb: fix compile warning
>
> MAINTAINERS | 5 +
> MAKEALL | 3 -
> Makefile | 45 -----
> arch/arm/cpu/arm920t/at91/reset.c | 2 +-
> arch/arm/cpu/arm920t/at91/timer.c | 12 +-
> arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 24 ++--
> arch/arm/include/asm/arch-at91/at91_matrix.h | 10 +-
> arch/arm/include/asm/arch-at91/at91_mc.h | 12 +-
> arch/arm/include/asm/arch-at91/at91_pio.h | 14 +-
> arch/arm/include/asm/arch-at91/at91_pmc.h | 10 +-
> arch/arm/include/asm/arch-at91/at91_rstc.h | 2 +-
> arch/arm/include/asm/arch-at91/at91_wdt.h | 2 +-
> arch/arm/include/asm/arch-at91/at91rm9200.h | 209
> ++++++++++++----------
> arch/arm/include/asm/arch-at91/at91sam9260.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9261.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9263.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9_sdramc.h | 30 ++--
> arch/arm/include/asm/arch-at91/at91sam9_smc.h | 12 +-
> board/BuS/eb_cpux9k2/cpux9k2.c | 52 +++---
> board/afeb9260/afeb9260.c | 101 ++++++-----
> board/atmel/at91rm9200ek/at91rm9200ek.c | 4 +-
> board/atmel/at91rm9200ek/led.c | 22 ++-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 127 +++++++------
> board/atmel/at91sam9260ek/config.mk | 1 -
> board/atmel/at91sam9260ek/led.c | 8 +-
> board/bluewater/snapper9260/Makefile | 53 ++++++
> board/bluewater/snapper9260/snapper9260.c | 169 +++++++++++++++++
> board/davedenx/qong/config.mk | 3 -
> board/emk/top9000/top9000.c | 64 ++++---
> board/eukrea/cpu9260/cpu9260.c | 33 ++--
> board/eukrea/cpu9260/led.c | 6 +-
> board/eukrea/cpuat91/cpuat91.c | 6 +-
> board/imx31_phycore/config.mk | 1 -
> board/imx31_phycore/imx31_phycore.c | 20 ++-
> board/mx1ads/config.mk | 25 ---
> board/mx1ads/mx1ads.c | 27 ++-
> boards.cfg | 9 +
> drivers/net/at91_emac.c | 44 +++---
> drivers/net/macb.c | 5 +-
> drivers/spi/atmel_dataflash_spi.c | 3 +-
> drivers/spi/mxc_spi.c | 2 +-
> include/configs/afeb9260.h | 78 +++++----
> include/configs/at91rm9200ek.h | 5 +-
> include/configs/at91sam9260ek.h | 107 +++++++-----
> include/configs/cpu9260.h | 11 +-
> include/configs/eb_cpux9k2.h | 23 ++--
> include/configs/imx31_phycore.h | 12 ++
> include/configs/mx1ads.h | 10 +
> include/configs/mx31pdk.h | 1 +
> include/configs/omap1510inn.h | 5 +
> include/configs/omap1610h2.h | 5 +
> include/configs/omap1610inn.h | 5 +
> include/configs/omap2420h4.h | 4 +
> include/configs/omap5912osk.h | 5 +
> include/configs/omap730p2.h | 5 +
> include/configs/qong.h | 4 +-
> include/configs/snapper9260.h | 191
> ++++++++++++++++++++
> include/configs/top9000.h | 30 ++--
> 58 files changed, 1084 insertions(+), 597 deletions(-)
> delete mode 100644 board/atmel/at91sam9260ek/config.mk
> create mode 100644 board/bluewater/snapper9260/Makefile
> create mode 100644 board/bluewater/snapper9260/snapper9260.c
> delete mode 100644 board/davedenx/qong/config.mk
> delete mode 100644 board/imx31_phycore/config.mk
> delete mode 100644 board/mx1ads/config.mk
> create mode 100644 include/configs/snapper9260.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Deliver yesterday, code today, think tomorrow."
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-21 20:28 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 29b83d983392fcb5378b915ee2112bb48b8c05be:
powerpc/p1022ds: set the clock-frequency prop only if the clock is
enabled (2011-06-09 15:53:38 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Aneesh V (6):
omap1610h2: fix build breaks
omap5912osk: fix build breaks
omap1510inn: fix build breaks
omap1610inn: fix build breaks
omap2420h4: fix build breaks
omap730p2: fix build breaks
Eric Benard (4):
arm926ejs/at91/lowlevel_init.S: fix defines
cpu9260/9G20: fix board support
cpuat91: fix board support
include/asm/arch-at91: update several .h files to ATMEL_xxx name
scheme
Fabio Estevam (3):
mx1ads: Fix build by using new relocation scheme
imx31_phycore: Fix build by using new relocation scheme
mx31pdk: Add DHCP command
Helmut Raiger (1):
mxc_spi.c: typo fixed
Jens Scharsig (1):
update arm/at91rm9200 work with rework rework110202
Reinhard Meyer (3):
AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:
AT91 rework: fix TOP9000 files to build again
ATMEL spi_dataflash driver - fix to build again
Ryan Mallon (1):
Add support for Bluewater Systems Snapper 9260/9G20 modules
Sergey Lapin (1):
Build fix/update of AFEB9260
Stefano Babic (1):
MX31: QONG: drop config.mk
andreas.devel at googlemail.com (2):
at91_emac: fix compile warning
macb: fix compile warning
MAINTAINERS | 5 +
MAKEALL | 3 -
Makefile | 45 -----
arch/arm/cpu/arm920t/at91/reset.c | 2 +-
arch/arm/cpu/arm920t/at91/timer.c | 12 +-
arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 24 ++--
arch/arm/include/asm/arch-at91/at91_matrix.h | 10 +-
arch/arm/include/asm/arch-at91/at91_mc.h | 12 +-
arch/arm/include/asm/arch-at91/at91_pio.h | 14 +-
arch/arm/include/asm/arch-at91/at91_pmc.h | 10 +-
arch/arm/include/asm/arch-at91/at91_rstc.h | 2 +-
arch/arm/include/asm/arch-at91/at91_wdt.h | 2 +-
arch/arm/include/asm/arch-at91/at91rm9200.h | 209
++++++++++++----------
arch/arm/include/asm/arch-at91/at91sam9260.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9261.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9263.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9_sdramc.h | 30 ++--
arch/arm/include/asm/arch-at91/at91sam9_smc.h | 12 +-
board/BuS/eb_cpux9k2/cpux9k2.c | 52 +++---
board/afeb9260/afeb9260.c | 101 ++++++-----
board/atmel/at91rm9200ek/at91rm9200ek.c | 4 +-
board/atmel/at91rm9200ek/led.c | 22 ++-
board/atmel/at91sam9260ek/at91sam9260ek.c | 127 +++++++------
board/atmel/at91sam9260ek/config.mk | 1 -
board/atmel/at91sam9260ek/led.c | 8 +-
board/bluewater/snapper9260/Makefile | 53 ++++++
board/bluewater/snapper9260/snapper9260.c | 169 +++++++++++++++++
board/davedenx/qong/config.mk | 3 -
board/emk/top9000/top9000.c | 64 ++++---
board/eukrea/cpu9260/cpu9260.c | 33 ++--
board/eukrea/cpu9260/led.c | 6 +-
board/eukrea/cpuat91/cpuat91.c | 6 +-
board/imx31_phycore/config.mk | 1 -
board/imx31_phycore/imx31_phycore.c | 20 ++-
board/mx1ads/config.mk | 25 ---
board/mx1ads/mx1ads.c | 27 ++-
boards.cfg | 9 +
drivers/net/at91_emac.c | 44 +++---
drivers/net/macb.c | 5 +-
drivers/spi/atmel_dataflash_spi.c | 3 +-
drivers/spi/mxc_spi.c | 2 +-
include/configs/afeb9260.h | 78 +++++----
include/configs/at91rm9200ek.h | 5 +-
include/configs/at91sam9260ek.h | 107 +++++++-----
include/configs/cpu9260.h | 11 +-
include/configs/eb_cpux9k2.h | 23 ++--
include/configs/imx31_phycore.h | 12 ++
include/configs/mx1ads.h | 10 +
include/configs/mx31pdk.h | 1 +
include/configs/omap1510inn.h | 5 +
include/configs/omap1610h2.h | 5 +
include/configs/omap1610inn.h | 5 +
include/configs/omap2420h4.h | 4 +
include/configs/omap5912osk.h | 5 +
include/configs/omap730p2.h | 5 +
include/configs/qong.h | 4 +-
include/configs/snapper9260.h | 191
++++++++++++++++++++
include/configs/top9000.h | 30 ++--
58 files changed, 1084 insertions(+), 597 deletions(-)
delete mode 100644 board/atmel/at91sam9260ek/config.mk
create mode 100644 board/bluewater/snapper9260/Makefile
create mode 100644 board/bluewater/snapper9260/snapper9260.c
delete mode 100644 board/davedenx/qong/config.mk
delete mode 100644 board/imx31_phycore/config.mk
delete mode 100644 board/mx1ads/config.mk
create mode 100644 include/configs/snapper9260.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-06-08 20:41 Albert ARIBAUD
@ 2011-06-08 21:32 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-08 21:32 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4DEFDE71.7010609@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 6f4dd40cddbd69c56fec1285fee02cbd5a3833d8:
>
> Prepare v2011.06-rc2 (2011-06-02 23:19:27 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Fabio Estevam (4):
> mx31ads: Use the new relocation scheme
> mx31litekit: Fix boot with the new relocation scheme.
> imx31_litekit: Remove local config.mk
> imx27lite: Remove local config.mk
>
> Felix Radensky (1):
> mx31ads: Fix environment location on flash
>
> Minkyu Kang (1):
> SMDK6400: fix the compiler error
>
> board/freescale/mx31ads/config.mk | 1 -
> board/freescale/mx31ads/mx31ads.c | 19 +++++++++--
> board/freescale/mx31ads/u-boot.lds | 42
> +++++++++++++++++++++------
> board/logicpd/imx27lite/config.mk | 5 ---
> board/logicpd/imx31_litekit/config.mk | 1 -
> board/logicpd/imx31_litekit/imx31_litekit.c | 17 +++++++----
> board/samsung/smdk6400/u-boot-nand.lds | 2 +
> include/configs/imx27lite-common.h | 2 +
> include/configs/imx31_litekit.h | 3 ++
> include/configs/mx31ads.h | 21 +++++++++----
> 10 files changed, 80 insertions(+), 33 deletions(-)
> delete mode 100644 board/freescale/mx31ads/config.mk
> delete mode 100644 board/logicpd/imx27lite/config.mk
> delete mode 100644 board/logicpd/imx31_litekit/config.mk
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is much easier to suggest solutions when you know nothing
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-08 20:41 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 6f4dd40cddbd69c56fec1285fee02cbd5a3833d8:
Prepare v2011.06-rc2 (2011-06-02 23:19:27 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Fabio Estevam (4):
mx31ads: Use the new relocation scheme
mx31litekit: Fix boot with the new relocation scheme.
imx31_litekit: Remove local config.mk
imx27lite: Remove local config.mk
Felix Radensky (1):
mx31ads: Fix environment location on flash
Minkyu Kang (1):
SMDK6400: fix the compiler error
board/freescale/mx31ads/config.mk | 1 -
board/freescale/mx31ads/mx31ads.c | 19 +++++++++--
board/freescale/mx31ads/u-boot.lds | 42
+++++++++++++++++++++------
board/logicpd/imx27lite/config.mk | 5 ---
board/logicpd/imx31_litekit/config.mk | 1 -
board/logicpd/imx31_litekit/imx31_litekit.c | 17 +++++++----
board/samsung/smdk6400/u-boot-nand.lds | 2 +
include/configs/imx27lite-common.h | 2 +
include/configs/imx31_litekit.h | 3 ++
include/configs/mx31ads.h | 21 +++++++++----
10 files changed, 80 insertions(+), 33 deletions(-)
delete mode 100644 board/freescale/mx31ads/config.mk
delete mode 100644 board/logicpd/imx27lite/config.mk
delete mode 100644 board/logicpd/imx31_litekit/config.mk
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
@ 2011-06-01 20:15 ` Wolfgang Denk
1 sibling, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-06-01 20:15 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4DE55027.3080009@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
>
> .gitignore: update list of u-boot.* files and add *.bin (2011-05-22
> 23:46:26 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Chander Kashyap (4):
> S5P: GPIO Macro Values Corrected.
> S5P:SROM config code moved to s5p-common directory
> ARMV7: Add support for Samsung SMDKV310 Board
> ARMV7: MMC SPL Boot support for SMDKV310 board
>
> David M?ller (ELSOFT AG) (5):
> VCMA9: use ARM relocation feature to fix build error
> SMDK2410: activate ARM relocation feature
> SMDK2410: remove unneeded config.mk
> SMDK2410: use the CFI driver (and remove the old one)
> SMDK2410: various cleanup/code style fixes
>
> Dirk Behme (2):
> MMC S5P: Fix typo
> ARMV7: Vexpress: Add missing MMC header
>
> Fabio Estevam (6):
> mx31pdk: Clean up mx31pdk.h file
> MX53: Add initial support for MX53SMD board.
> MX51: vision: Let video mode struct be independant of watchdog.
> MX51: vision2: Fix build for vision2 board.
> MX53: Handle silicon revision 2.1 case
> MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
>
> Holger Brunck (2):
> arm/km: add second serial interface for kirkwood
> arm/km: update mgcoge3un board support
>
> Jaehoon Chung (1):
> S5P: add set_mmc_clk for external clock control
>
> Jason Kridner (1):
> BeagleBoard: fixed typo in typecast
>
> Jason Liu (2):
> MX53: support for freescale MX53LOCO board
> mx5: board: code clean up for checkboard code
>
> Michael Walle (1):
> mvsata: issue hard reset on initialization
>
> Minkyu Kang (2):
> S5PC2XX: Support the cpu revision
> S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
>
> Shawn Guo (2):
> mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
> mx5: Fix CONFIG_OF_LIBFDT redefined warning
>
> Stefano Babic (3):
> MX31: Make get_reset_cause() static and drop unreachable code
> MX5: drop config.mk from efikamx board
> MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
>
> Valentin Longchamp (6):
> arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
> arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
> arm/km: introduce bootcount env variable and clean km_arm
> arm/km: disable ls (through jffs2 support)
> arm/km: rename mgcoge2un to mgcoge3un
> mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
>
> seedshope (1):
> Add _end for the end of u-boot image for SMDK6400
>
> MAINTAINERS | 12 +-
> Makefile | 11 +
> arch/arm/cpu/arm1136/mx31/generic.c | 6 +-
> arch/arm/cpu/armv7/mx5/soc.c | 10 +-
> arch/arm/cpu/armv7/s5p-common/Makefile | 3 +-
> arch/arm/cpu/armv7/s5p-common/cpu_info.c | 2 +
> arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/sromc.c | 22 +-
> arch/arm/cpu/armv7/s5pc1xx/Makefile | 1 -
> arch/arm/cpu/armv7/s5pc1xx/clock.c | 5 +
> arch/arm/cpu/armv7/s5pc2xx/clock.c | 76 +++-
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> arch/arm/include/asm/arch-s5pc1xx/clk.h | 1 +
> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 4 +-
> arch/arm/include/asm/arch-s5pc1xx/mmc.h | 1 +
> .../include/asm/arch-s5pc1xx/{smc.h => sromc.h} | 8 +-
> arch/arm/include/asm/arch-s5pc2xx/clk.h | 1 +
> arch/arm/include/asm/arch-s5pc2xx/cpu.h | 12 +-
> arch/arm/include/asm/arch-s5pc2xx/gpio.h | 7 +-
> arch/arm/include/asm/arch-s5pc2xx/mmc.h | 1 +
> arch/arm/include/asm/arch-s5pc2xx/sromc.h | 51 +++
> board/armltd/vexpress/ca9x4_ct_vxp.c | 1 +
> board/efikamx/efikamx.c | 42 +--
> board/freescale/mx51evk/mx51evk.c | 36 +--
> board/freescale/mx53evk/mx53evk.c | 21 +-
> .../config.mk => freescale/mx53loco/Makefile} | 36 ++-
> board/freescale/mx53loco/imximage.cfg | 96 ++++
> board/freescale/mx53loco/mx53loco.c | 302 +++++++++++++
> .../config.mk => freescale/mx53smd/Makefile} | 35 ++-
> board/freescale/mx53smd/imximage.cfg | 96 ++++
> board/freescale/mx53smd/mx53smd.c | 229 ++++++++++
> board/keymile/km_arm/km_arm.c | 108 ++++--
> board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++
> board/samsung/smdk2410/Makefile | 2 +-
> board/samsung/smdk2410/config.mk | 25 -
> board/samsung/smdk2410/flash.c | 433
> ------------------
> board/samsung/smdk2410/smdk2410.c | 73 ++--
> board/samsung/smdkc100/smdkc100.c | 4 +-
> .../config.mk => samsung/smdkv310/Makefile} | 29 +-
> board/samsung/smdkv310/lowlevel_init.S | 470
> ++++++++++++++++++++
> board/samsung/smdkv310/mem_setup.S | 365 +++++++++++++++
> board/samsung/smdkv310/smdkv310.c | 136 ++++++
> board/ti/beagle/beagle.c | 2 +-
> board/ttcontrol/vision2/vision2.c | 47 +--
> boards.cfg | 9 +-
> drivers/block/mvsata_ide.c | 10 +-
> drivers/mmc/s5p_mmc.c | 6 +-
> drivers/net/mvgbe.h | 2 +
> include/configs/VCMA9.h | 5 +
> include/configs/km/keymile-common.h | 9 -
> include/configs/km/km_arm.h | 25 +
> include/configs/{mgcoge2un.h => mgcoge3un.h} | 49 ++-
> include/configs/mx31pdk.h | 32 +-
> include/configs/mx51evk.h | 3 -
> include/configs/mx53evk.h | 3 -
> include/configs/mx53loco.h | 185 ++++++++
> include/configs/mx53smd.h | 191 ++++++++
> include/configs/smdk2410.h | 181 +++++---
> include/configs/smdkv310.h | 169 +++++++
> include/configs/suen3.h | 15 -
> include/configs/suen8.h | 15 -
> include/configs/vision2.h | 1 +
> mmc_spl/board/samsung/smdkv310/Makefile | 105 +++++
> mmc_spl/board/samsung/smdkv310/mmc_boot.c | 85 ++++
> .../board/samsung/smdkv310/tools/mkv310_image.c | 116 +++++
> mmc_spl/board/samsung/smdkv310/u-boot.lds | 86 ++++
> nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +
> 66 files changed, 3447 insertions(+), 877 deletions(-)
> rename arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/sromc.c (68%)
> rename arch/arm/include/asm/arch-s5pc1xx/{smc.h => sromc.h} (92%)
> create mode 100644 arch/arm/include/asm/arch-s5pc2xx/sromc.h
> copy board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
> create mode 100644 board/freescale/mx53loco/imximage.cfg
> create mode 100644 board/freescale/mx53loco/mx53loco.c
> rename board/{efikamx/config.mk => freescale/mx53smd/Makefile} (50%)
> create mode 100644 board/freescale/mx53smd/imximage.cfg
> create mode 100644 board/freescale/mx53smd/mx53smd.c
> create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg
> delete mode 100644 board/samsung/smdk2410/config.mk
> delete mode 100644 board/samsung/smdk2410/flash.c
> rename board/{ttcontrol/vision2/config.mk =>
> samsung/smdkv310/Makefile} (58%)
> create mode 100644 board/samsung/smdkv310/lowlevel_init.S
> create mode 100644 board/samsung/smdkv310/mem_setup.S
> create mode 100644 board/samsung/smdkv310/smdkv310.c
> rename include/configs/{mgcoge2un.h => mgcoge3un.h} (56%)
> create mode 100644 include/configs/mx53loco.h
> create mode 100644 include/configs/mx53smd.h
> create mode 100644 include/configs/smdkv310.h
> create mode 100644 mmc_spl/board/samsung/smdkv310/Makefile
> create mode 100644 mmc_spl/board/samsung/smdkv310/mmc_boot.c
> create mode 100644 mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c
> create mode 100644 mmc_spl/board/samsung/smdkv310/u-boot.lds
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wenn Du ein' weise Antwort verlangst, Mu?t Du vern?nftig fragen.
-- Goethe, Invektiven
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-31 22:29 ` John Rigby
@ 2011-06-01 17:15 ` Albert ARIBAUD
0 siblings, 0 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-06-01 17:15 UTC (permalink / raw)
To: u-boot
Hi John,
Le 01/06/2011 00:29, John Rigby a ?crit :
> On Tue, May 31, 2011 at 2:31 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>> Hi Wolfgang,
>>
>> The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
>>
>> .gitignore: update list of u-boot.* files and add *.bin (2011-05-22
>> 23:46:26 +0200)
>>
>> are available in the git repository at:
>> git://git.denx.de/u-boot-arm.git master
>>
> Albert,
>
> I see my U8500 patches have not been merged yet. Is there a chance
> they will be sometime merged?
>
> ttp://patchwork.ozlabs.org/patch/92053/
> http://patchwork.ozlabs.org/patch/92052/
> http://patchwork.ozlabs.org/patch/92054/
Pulling them in right now.
> Thanks,
> John
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-31 20:31 Albert ARIBAUD
@ 2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
1 sibling, 1 reply; 261+ messages in thread
From: John Rigby @ 2011-05-31 22:29 UTC (permalink / raw)
To: u-boot
On Tue, May 31, 2011 at 2:31 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Wolfgang,
>
> The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
>
> ? .gitignore: update list of u-boot.* files and add *.bin (2011-05-22
> 23:46:26 +0200)
>
> are available in the git repository at:
> ? git://git.denx.de/u-boot-arm.git master
>
Albert,
I see my U8500 patches have not been merged yet. Is there a chance
they will be sometime merged?
ttp://patchwork.ozlabs.org/patch/92053/
http://patchwork.ozlabs.org/patch/92052/
http://patchwork.ozlabs.org/patch/92054/
Thanks,
John
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 20:15 ` Wolfgang Denk
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-05-31 20:31 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 5d1ee00b1fe1180503f6dfc10e87a6c6e74778f3:
.gitignore: update list of u-boot.* files and add *.bin (2011-05-22
23:46:26 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Chander Kashyap (4):
S5P: GPIO Macro Values Corrected.
S5P:SROM config code moved to s5p-common directory
ARMV7: Add support for Samsung SMDKV310 Board
ARMV7: MMC SPL Boot support for SMDKV310 board
David M?ller (ELSOFT AG) (5):
VCMA9: use ARM relocation feature to fix build error
SMDK2410: activate ARM relocation feature
SMDK2410: remove unneeded config.mk
SMDK2410: use the CFI driver (and remove the old one)
SMDK2410: various cleanup/code style fixes
Dirk Behme (2):
MMC S5P: Fix typo
ARMV7: Vexpress: Add missing MMC header
Fabio Estevam (6):
mx31pdk: Clean up mx31pdk.h file
MX53: Add initial support for MX53SMD board.
MX51: vision: Let video mode struct be independant of watchdog.
MX51: vision2: Fix build for vision2 board.
MX53: Handle silicon revision 2.1 case
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
Holger Brunck (2):
arm/km: add second serial interface for kirkwood
arm/km: update mgcoge3un board support
Jaehoon Chung (1):
S5P: add set_mmc_clk for external clock control
Jason Kridner (1):
BeagleBoard: fixed typo in typecast
Jason Liu (2):
MX53: support for freescale MX53LOCO board
mx5: board: code clean up for checkboard code
Michael Walle (1):
mvsata: issue hard reset on initialization
Minkyu Kang (2):
S5PC2XX: Support the cpu revision
S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
Shawn Guo (2):
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx5: Fix CONFIG_OF_LIBFDT redefined warning
Stefano Babic (3):
MX31: Make get_reset_cause() static and drop unreachable code
MX5: drop config.mk from efikamx board
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
Valentin Longchamp (6):
arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
arm/km: introduce bootcount env variable and clean km_arm
arm/km: disable ls (through jffs2 support)
arm/km: rename mgcoge2un to mgcoge3un
mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
seedshope (1):
Add _end for the end of u-boot image for SMDK6400
MAINTAINERS | 12 +-
Makefile | 11 +
arch/arm/cpu/arm1136/mx31/generic.c | 6 +-
arch/arm/cpu/armv7/mx5/soc.c | 10 +-
arch/arm/cpu/armv7/s5p-common/Makefile | 3 +-
arch/arm/cpu/armv7/s5p-common/cpu_info.c | 2 +
arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/sromc.c | 22 +-
arch/arm/cpu/armv7/s5pc1xx/Makefile | 1 -
arch/arm/cpu/armv7/s5pc1xx/clock.c | 5 +
arch/arm/cpu/armv7/s5pc2xx/clock.c | 76 +++-
arch/arm/include/asm/arch-mx31/clock.h | 1 +
arch/arm/include/asm/arch-s5pc1xx/clk.h | 1 +
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 4 +-
arch/arm/include/asm/arch-s5pc1xx/mmc.h | 1 +
.../include/asm/arch-s5pc1xx/{smc.h => sromc.h} | 8 +-
arch/arm/include/asm/arch-s5pc2xx/clk.h | 1 +
arch/arm/include/asm/arch-s5pc2xx/cpu.h | 12 +-
arch/arm/include/asm/arch-s5pc2xx/gpio.h | 7 +-
arch/arm/include/asm/arch-s5pc2xx/mmc.h | 1 +
arch/arm/include/asm/arch-s5pc2xx/sromc.h | 51 +++
board/armltd/vexpress/ca9x4_ct_vxp.c | 1 +
board/efikamx/efikamx.c | 42 +--
board/freescale/mx51evk/mx51evk.c | 36 +--
board/freescale/mx53evk/mx53evk.c | 21 +-
.../config.mk => freescale/mx53loco/Makefile} | 36 ++-
board/freescale/mx53loco/imximage.cfg | 96 ++++
board/freescale/mx53loco/mx53loco.c | 302 +++++++++++++
.../config.mk => freescale/mx53smd/Makefile} | 35 ++-
board/freescale/mx53smd/imximage.cfg | 96 ++++
board/freescale/mx53smd/mx53smd.c | 229 ++++++++++
board/keymile/km_arm/km_arm.c | 108 ++++--
board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++
board/samsung/smdk2410/Makefile | 2 +-
board/samsung/smdk2410/config.mk | 25 -
board/samsung/smdk2410/flash.c | 433
------------------
board/samsung/smdk2410/smdk2410.c | 73 ++--
board/samsung/smdkc100/smdkc100.c | 4 +-
.../config.mk => samsung/smdkv310/Makefile} | 29 +-
board/samsung/smdkv310/lowlevel_init.S | 470
++++++++++++++++++++
board/samsung/smdkv310/mem_setup.S | 365 +++++++++++++++
board/samsung/smdkv310/smdkv310.c | 136 ++++++
board/ti/beagle/beagle.c | 2 +-
board/ttcontrol/vision2/vision2.c | 47 +--
boards.cfg | 9 +-
drivers/block/mvsata_ide.c | 10 +-
drivers/mmc/s5p_mmc.c | 6 +-
drivers/net/mvgbe.h | 2 +
include/configs/VCMA9.h | 5 +
include/configs/km/keymile-common.h | 9 -
include/configs/km/km_arm.h | 25 +
include/configs/{mgcoge2un.h => mgcoge3un.h} | 49 ++-
include/configs/mx31pdk.h | 32 +-
include/configs/mx51evk.h | 3 -
include/configs/mx53evk.h | 3 -
include/configs/mx53loco.h | 185 ++++++++
include/configs/mx53smd.h | 191 ++++++++
include/configs/smdk2410.h | 181 +++++---
include/configs/smdkv310.h | 169 +++++++
include/configs/suen3.h | 15 -
include/configs/suen8.h | 15 -
include/configs/vision2.h | 1 +
mmc_spl/board/samsung/smdkv310/Makefile | 105 +++++
mmc_spl/board/samsung/smdkv310/mmc_boot.c | 85 ++++
.../board/samsung/smdkv310/tools/mkv310_image.c | 116 +++++
mmc_spl/board/samsung/smdkv310/u-boot.lds | 86 ++++
nand_spl/board/samsung/smdk6400/u-boot.lds | 2 +
66 files changed, 3447 insertions(+), 877 deletions(-)
rename arch/arm/cpu/armv7/{s5pc1xx => s5p-common}/sromc.c (68%)
rename arch/arm/include/asm/arch-s5pc1xx/{smc.h => sromc.h} (92%)
create mode 100644 arch/arm/include/asm/arch-s5pc2xx/sromc.h
copy board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
create mode 100644 board/freescale/mx53loco/imximage.cfg
create mode 100644 board/freescale/mx53loco/mx53loco.c
rename board/{efikamx/config.mk => freescale/mx53smd/Makefile} (50%)
create mode 100644 board/freescale/mx53smd/imximage.cfg
create mode 100644 board/freescale/mx53smd/mx53smd.c
create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg
delete mode 100644 board/samsung/smdk2410/config.mk
delete mode 100644 board/samsung/smdk2410/flash.c
rename board/{ttcontrol/vision2/config.mk =>
samsung/smdkv310/Makefile} (58%)
create mode 100644 board/samsung/smdkv310/lowlevel_init.S
create mode 100644 board/samsung/smdkv310/mem_setup.S
create mode 100644 board/samsung/smdkv310/smdkv310.c
rename include/configs/{mgcoge2un.h => mgcoge3un.h} (56%)
create mode 100644 include/configs/mx53loco.h
create mode 100644 include/configs/mx53smd.h
create mode 100644 include/configs/smdkv310.h
create mode 100644 mmc_spl/board/samsung/smdkv310/Makefile
create mode 100644 mmc_spl/board/samsung/smdkv310/mmc_boot.c
create mode 100644 mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c
create mode 100644 mmc_spl/board/samsung/smdkv310/u-boot.lds
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-12 17:27 ` Wolfgang Denk
@ 2011-05-14 18:38 ` Dirk Behme
0 siblings, 0 replies; 261+ messages in thread
From: Dirk Behme @ 2011-05-14 18:38 UTC (permalink / raw)
To: u-boot
On 12.05.2011 19:27, Wolfgang Denk wrote:
> Dear Albert ARIBAUD,
>
> In message<4DCAFA98.2020205@aribaud.net> you wrote:
>> Hi Wolfgang,
>>
>> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
>>
>> keymile boards: move keymile specific header in subdir (2011-05-10
>> 23:22:49 +0200)
>>
>> are available in the git repository at:
>> git://git.denx.de/u-boot-arm master
...
>
> Applied, thanks.
Doing a ./MAKEALL ARMV7 on the recent git head
(91081e01b10d64e99dc485e477e6ae3b1171e8ce Revert "Fix building tools
alone with host compiler") I get the following errors/warnings. I've
done a quick scan of the available patches at the mailing list and
tried to add the available uncommitted fixes. Anybody likes apply them
or send patches where I haven't found any?
omap3_beagle:
beagle.c: In function 'misc_init_r':
beagle.c:174: warning: initialization from incompatible pointer type
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=d4e53f063dd25e071444b87303573e7440deeb89
Fix:
http://lists.denx.de/pipermail/u-boot/2011-April/091030.html
omap3_beagle:
omap3_overo:
igep0030:
igep0020:
omap_hsmmc.c: In function 'omap_mmc_init':
omap_hsmmc.c:474: warning: implicit declaration of function
'get_cpu_family'
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_rev'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=4ca9244d74f146a0605f5bee28a66e39aae88d3e
Fix: ? (-> fix missing function prototype)
s5p_goni:
s5p_mmc.c: In function 's5p_mmc_initialize':
s5p_mmc.c:469: error: 'struct mmc' has no member named 'm_bmax'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=8feafcc49c0b7a9c541904f95a43dbef2fecc38b
Fix: ? (-> fix typo)
a9x4_ct_vxp:
ca9x4_ct_vxp.c: In function 'cpu_mmc_init':
ca9x4_ct_vxp.c:93: warning: implicit declaration of function
'arm_pl180_mmci_init'
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=f0c64526b7e51ba997a0f1baf9e74e6d497b957e
Fix: ? (-> fix missing function prototype)
mx51evk:
In file included from include/config.h:6,
from include/common.h:37:
include/configs/mx51evk.h:229:1: warning: "CONFIG_OF_LIBFDT" redefined
include/configs/mx51evk.h:51:1: warning: this is the location of the
previous definition
Most probably introduced with:
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=dcd441c32560a823019c720fb034ff425efbc376
http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683
Fix:
http://patchwork.ozlabs.org/patch/93978/
Many thanks
Dirk
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
@ 2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
1 sibling, 1 reply; 261+ messages in thread
From: Wolfgang Denk @ 2011-05-12 17:27 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4DCAFA98.2020205@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
>
> keymile boards: move keymile specific header in subdir (2011-05-10
> 23:22:49 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm master
>
> Ben Gardiner (1):
> da850evm: fix NAND WSTROBE and TA timings
>
> Clint Adams (4):
> Rename openrd_base files to openrd
> Add definitions for OpenRD-Client and OpenRD-Ultimate
> Initialize second PHY on OpenRD-Client and OpenRD-Ultimate
> Enable multiple fs options for Marvell SoC family on OpenRD boards
>
> Fabio Estevam (2):
> MX31: mx31pdk: Add watchdog support
> gpio: imx: Fix return value on error
>
> Simon Guinot (2):
> Kirkwood: allow to override CONFIG_SYS_TCLK
> mv-common.h: fix DRAM banks configuration
>
> Stefano Babic (2):
> MX31: removed warning due to missing prototype
> MX31: change return value of get_cpu_rev
>
> MAKEALL | 2 +
> arch/arm/cpu/arm1136/mx31/generic.c | 31
> +++++++++++--------
> arch/arm/include/asm/arch-kirkwood/kw88f6281.h | 8 +++--
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> board/Marvell/{openrd_base => openrd}/Makefile | 2 +-
> board/Marvell/{openrd_base => openrd}/kwbimage.cfg | 0
> .../{openrd_base/openrd_base.c => openrd/openrd.c} | 33
> +++++++++++++++++---
> .../{openrd_base/openrd_base.h => openrd/openrd.h} | 0
> board/davinci/da8xxevm/da850evm.c | 4 +-
> board/freescale/mx31pdk/mx31pdk.c | 16 +++++++++
> boards.cfg | 4 ++-
> drivers/gpio/mxc_gpio.c | 5 ++-
> include/configs/mv-common.h | 8 ++--
> include/configs/mx31pdk.h | 3 ++
> include/configs/{openrd_base.h => openrd.h} | 33
> +++++++++++++++++---
> 16 files changed, 115 insertions(+), 37 deletions(-)
> rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
> rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
> rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (80%)
> rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (100%)
> rename include/configs/{openrd_base.h => openrd.h} (81%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A student of probability soon realizes that by its nature the
billion-to-one chance crops up nine times out of ten, and that the
greatest odds boil down to a double-sided statement: it will happen,
or it will not. - Terry Pratchett, _The Dark Side of the Sun_
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
@ 2011-05-12 9:12 ` Simon Guinot
1 sibling, 0 replies; 261+ messages in thread
From: Simon Guinot @ 2011-05-12 9:12 UTC (permalink / raw)
To: u-boot
Hi Rogan,
On Thu, May 12, 2011 at 12:11:41AM +0200, Rogan Dawes wrote:
> On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> > Simon Guinot (2):
> > mv-common.h: fix DRAM banks configuration
>
> I think Prafulla already accepted my own change to fix this. Not sure
> which one is considered better.
The two patches are addressing different issues (DRAM configuration
against detection). They are needed both.
Regards,
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110512/7e6cc1cd/attachment.pgp
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-12 8:48 ` Prafulla Wadaskar
@ 2011-05-12 9:06 ` Simon Guinot
0 siblings, 0 replies; 261+ messages in thread
From: Simon Guinot @ 2011-05-12 9:06 UTC (permalink / raw)
To: u-boot
Hi Prafulla,
On Thu, May 12, 2011 at 01:48:34AM -0700, Prafulla Wadaskar wrote:
>
>
> > -----Original Message-----
> > From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
> > Sent: Thursday, May 12, 2011 11:11 AM
> > To: Rogan Dawes
> > Cc: Wolfgang Denk; u-boot at lists.denx.de; Prafulla Wadaskar
> > Subject: Re: Pull request: u-boot-arm/master
> >
> > Hi Rogan,
> >
> > Le 12/05/2011 00:11, Rogan Dawes a ?crit :
> > > On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> > >> Simon Guinot (2):
> > >> mv-common.h: fix DRAM banks configuration
> > >
> > > I think Prafulla already accepted my own change to fix this. Not sure
> > > which one is considered better.
>
> Yes, This patch is accepted and applied to u-boot-marvell.git, the same is pulled on u-boot-arm.git too.
>
> >
> > Both your and Simon's changes would come from Prafulla's Marvell tree
> > actually.
> >
> > Prafulla, can you comment?
>
> Hi Simon
> You may rebase your development and send new patch series excluding applied patches and considering review comments so far.
IMHO, the v6 series is in a good shape. All the review comments have
been addressed and all the accepted patches have been dropped. Moreover,
the merge with current u-boot-{arm,marvell} git tree is rather trivial.
Anyway, I will post again my last stagged two patches.
Regards,
Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110512/b088cf4c/attachment.pgp
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-12 5:41 ` Albert ARIBAUD
@ 2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
0 siblings, 1 reply; 261+ messages in thread
From: Prafulla Wadaskar @ 2011-05-12 8:48 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
> Sent: Thursday, May 12, 2011 11:11 AM
> To: Rogan Dawes
> Cc: Wolfgang Denk; u-boot at lists.denx.de; Prafulla Wadaskar
> Subject: Re: Pull request: u-boot-arm/master
>
> Hi Rogan,
>
> Le 12/05/2011 00:11, Rogan Dawes a ?crit :
> > On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> >> Simon Guinot (2):
> >> mv-common.h: fix DRAM banks configuration
> >
> > I think Prafulla already accepted my own change to fix this. Not sure
> > which one is considered better.
Yes, This patch is accepted and applied to u-boot-marvell.git, the same is pulled on u-boot-arm.git too.
>
> Both your and Simon's changes would come from Prafulla's Marvell tree
> actually.
>
> Prafulla, can you comment?
Hi Simon
You may rebase your development and send new patch series excluding applied patches and considering review comments so far.
Regards..
Prafulla . .
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-11 22:11 ` Rogan Dawes
@ 2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:12 ` Simon Guinot
1 sibling, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-05-12 5:41 UTC (permalink / raw)
To: u-boot
Hi Rogan,
Le 12/05/2011 00:11, Rogan Dawes a ?crit :
> On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
>> Simon Guinot (2):
>> mv-common.h: fix DRAM banks configuration
>
> I think Prafulla already accepted my own change to fix this. Not sure
> which one is considered better.
Both your and Simon's changes would come from Prafulla's Marvell tree
actually.
Prafulla, can you comment?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-11 21:07 Albert ARIBAUD
@ 2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
1 sibling, 2 replies; 261+ messages in thread
From: Rogan Dawes @ 2011-05-11 22:11 UTC (permalink / raw)
To: u-boot
On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> Simon Guinot (2):
> mv-common.h: fix DRAM banks configuration
I think Prafulla already accepted my own change to fix this. Not sure
which one is considered better.
I had not actually intended mine for merging (no sign off), and had
simply posted the patch as part of my DNS323 series. However, Prafulla
saw it and merged it some time ago.
Regards,
Rogan
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 17:27 ` Wolfgang Denk
0 siblings, 2 replies; 261+ messages in thread
From: Albert ARIBAUD @ 2011-05-11 21:07 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
keymile boards: move keymile specific header in subdir (2011-05-10
23:22:49 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Ben Gardiner (1):
da850evm: fix NAND WSTROBE and TA timings
Clint Adams (4):
Rename openrd_base files to openrd
Add definitions for OpenRD-Client and OpenRD-Ultimate
Initialize second PHY on OpenRD-Client and OpenRD-Ultimate
Enable multiple fs options for Marvell SoC family on OpenRD boards
Fabio Estevam (2):
MX31: mx31pdk: Add watchdog support
gpio: imx: Fix return value on error
Simon Guinot (2):
Kirkwood: allow to override CONFIG_SYS_TCLK
mv-common.h: fix DRAM banks configuration
Stefano Babic (2):
MX31: removed warning due to missing prototype
MX31: change return value of get_cpu_rev
MAKEALL | 2 +
arch/arm/cpu/arm1136/mx31/generic.c | 31
+++++++++++--------
arch/arm/include/asm/arch-kirkwood/kw88f6281.h | 8 +++--
arch/arm/include/asm/arch-mx31/clock.h | 1 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
board/Marvell/{openrd_base => openrd}/Makefile | 2 +-
board/Marvell/{openrd_base => openrd}/kwbimage.cfg | 0
.../{openrd_base/openrd_base.c => openrd/openrd.c} | 33
+++++++++++++++++---
.../{openrd_base/openrd_base.h => openrd/openrd.h} | 0
board/davinci/da8xxevm/da850evm.c | 4 +-
board/freescale/mx31pdk/mx31pdk.c | 16 +++++++++
boards.cfg | 4 ++-
drivers/gpio/mxc_gpio.c | 5 ++-
include/configs/mv-common.h | 8 ++--
include/configs/mx31pdk.h | 3 ++
include/configs/{openrd_base.h => openrd.h} | 33
+++++++++++++++++---
16 files changed, 115 insertions(+), 37 deletions(-)
rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (80%)
rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (100%)
rename include/configs/{openrd_base.h => openrd.h} (81%)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-05-02 8:46 ` Macpaul Lin
@ 2011-05-02 10:31 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-05-02 10:31 UTC (permalink / raw)
To: u-boot
Dear Macpaul Lin,
In message <BANLkTikSq59Aoy3wP_WYrVk3mhdM1vHiPw@mail.gmail.com> you wrote:
>
> I have split the original patch v2 "ftsmc020: enhanced features and unnested
> structures - http://patchwork.ozlabs.org/patch/89078/" into 3 patches
> according to your suggestion as follows:
>
> ftsmc020: fix relocation
> http://patchwork.ozlabs.org/patch/93606/
>
> ftsmc020: un-nest the register structure in header
> http://patchwork.ozlabs.org/patch/93607/
>
> ftsmc020: add missing definitions
> http://patchwork.ozlabs.org/patch/93608/
>
> I also attached the In-reply-to header in the e-mail with these v3 patches.
> So these 3 patches should be in the origin thread of previous patch v2.
Thanks!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Accident: A condition in which presence of mind is good, but absence
of body is better.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-30 20:44 ` Wolfgang Denk
@ 2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Macpaul Lin @ 2011-05-02 8:46 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
2011/5/1 Wolfgang Denk <wd@denx.de>:
> Dear Macpaul Lin,
>
> OK, as you explain it, can you please split this commit into 4
> separate patches then:
>
> 1) code clean up
> 2) fix relocation problem
> 3) reorganize structures for better coding style
> 4) enhance code
I have split the original patch v2 "ftsmc020: enhanced features and unnested
structures - http://patchwork.ozlabs.org/patch/89078/" into 3 patches
according to your suggestion as follows:
ftsmc020: fix relocation
http://patchwork.ozlabs.org/patch/93606/
ftsmc020: un-nest the register structure in header
http://patchwork.ozlabs.org/patch/93607/
ftsmc020: add missing definitions
http://patchwork.ozlabs.org/patch/93608/
I also attached the In-reply-to header in the e-mail with these v3 patches.
So these 3 patches should be in the origin thread of previous patch v2.
Thanks.
--
Best regards,
Macpaul Lin
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-29 1:31 ` Macpaul Lin
@ 2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
0 siblings, 1 reply; 261+ messages in thread
From: Wolfgang Denk @ 2011-04-30 20:44 UTC (permalink / raw)
To: u-boot
Dear Macpaul Lin,
In message <BANLkTimFR6ZbW_FJOSkFtnopTitrf-H6nQ@mail.gmail.com> you wrote:
>
> > Is this a bug fix?
...
> It is about code clean up, avoid relocation prolem for
> global declaration, and reorganinzed structures for
> better coding style.
>
> Also add some enhancement according to correct datasheet
> which is used by other SoC that is waiting to be reviewed.
OK, as you explain it, can you please split this commit into 4
separate patches then:
1) code clean up
2) fix relocation problem
3) reorganize structures for better coding style
4) enhance code
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The net result is a system that is not only binary compatible with
4.3 BSD, but is even bug for bug compatible in almost all features."
- Avadit Tevanian, Jr., "Architecture-Independent Virtual Memory
Management for Parallel and Distributed Environments: The Mach
Approach"
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-28 21:14 ` Wolfgang Denk
@ 2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Macpaul Lin @ 2011-04-29 1:31 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
2011/4/29 Wolfgang Denk <wd@denx.de>:
> Dear Macpaul Lin,
>
> In message <BANLkTik20=bV2ruPGBKz_FT2BMCWz666nw@mail.gmail.com> you wrote:
>>
>> Would you please consider also apply this dependant fix when you have time?
>> ?[U-Boot,v2] ftsmc020: enhanced features and unnested structures
>> http://patchwork.ozlabs.org/patch/89078/
>
> Is this a bug fix?
>
> Best regards,
>
> Wolfgang Denk
It is about code clean up, avoid relocation prolem for
global declaration, and reorganinzed structures for
better coding style.
Also add some enhancement according to correct datasheet
which is used by other SoC that is waiting to be reviewed.
Thanks.
--
Best regards,
Macpaul Lin
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-28 16:14 Albert ARIBAUD
@ 2011-04-28 21:17 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-04-28 21:17 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4DB99251.9040307@aribaud.net> you wrote:
> Wolfgang,
>
> The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe:
>
> common: add a grepenv command (2011-04-28 01:00:07 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm master
>
> Grant Likely (1):
> Add CONFIG_OF_LIBFDT to more boards.
>
> Po-Yu Chuang (1):
> arm: a320: fix compile error caused by commit 00d10eb
>
> include/configs/a320evb.h | 1 -
> include/configs/ca9x4_ct_vxp.h | 2 ++
> include/configs/devkit8000.h | 2 ++
> include/configs/efikamx.h | 2 ++
> include/configs/igep0020.h | 2 ++
> include/configs/igep0030.h | 2 ++
> include/configs/mx51evk.h | 2 ++
> include/configs/mx53evk.h | 2 ++
> include/configs/omap3_overo.h | 2 ++
> include/configs/omap3_pandora.h | 2 ++
> include/configs/omap3_sdp3430.h | 2 ++
> include/configs/omap3_zoom1.h | 2 ++
> include/configs/omap3_zoom2.h | 2 ++
> include/configs/omap4_panda.h | 2 ++
> include/configs/omap4_sdp4430.h | 2 ++
> include/configs/tegra2-common.h | 1 +
> 16 files changed, 29 insertions(+), 1 deletions(-)
Applied, thanks a lot.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Do you suppose the reason the ends of the `Intel Inside' logo don't
match up is that it was drawn on a Pentium?
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-27 23:42 ` Macpaul Lin
@ 2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
0 siblings, 1 reply; 261+ messages in thread
From: Wolfgang Denk @ 2011-04-28 21:14 UTC (permalink / raw)
To: u-boot
Dear Macpaul Lin,
In message <BANLkTik20=bV2ruPGBKz_FT2BMCWz666nw@mail.gmail.com> you wrote:
>
> Would you please consider also apply this dependant fix when you have time?
> [U-Boot,v2] ftsmc020: enhanced features and unnested structures
> http://patchwork.ozlabs.org/patch/89078/
Is this a bug fix?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The perversity of nature is nowhere better demonstrated by the fact
that, when exposed to the same atmosphere, bread becomes hard while
crackers become soft.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-04-28 16:14 UTC (permalink / raw)
To: u-boot
Wolfgang,
The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe:
common: add a grepenv command (2011-04-28 01:00:07 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Grant Likely (1):
Add CONFIG_OF_LIBFDT to more boards.
Po-Yu Chuang (1):
arm: a320: fix compile error caused by commit 00d10eb
include/configs/a320evb.h | 1 -
include/configs/ca9x4_ct_vxp.h | 2 ++
include/configs/devkit8000.h | 2 ++
include/configs/efikamx.h | 2 ++
include/configs/igep0020.h | 2 ++
include/configs/igep0030.h | 2 ++
include/configs/mx51evk.h | 2 ++
include/configs/mx53evk.h | 2 ++
include/configs/omap3_overo.h | 2 ++
include/configs/omap3_pandora.h | 2 ++
include/configs/omap3_sdp3430.h | 2 ++
include/configs/omap3_zoom1.h | 2 ++
include/configs/omap3_zoom2.h | 2 ++
include/configs/omap4_panda.h | 2 ++
include/configs/omap4_sdp4430.h | 2 ++
include/configs/tegra2-common.h | 1 +
16 files changed, 29 insertions(+), 1 deletions(-)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-27 20:16 ` Wolfgang Denk
@ 2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Macpaul Lin @ 2011-04-27 23:42 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
2011/4/28 Wolfgang Denk <wd@denx.de>:
> Dear Albert ARIBAUD,
Since the following dependant patches has been applied to u-boot master.
>> Macpaul Lin (6):
>> ? ? ? ?ftsmc020: move ftsmc020 static mem controller to driver/mtd
>
> Applied, thanks.
>
> Best regards,
>
> Wolfgang Denk
Would you please consider also apply this dependant fix when you have time?
[U-Boot,v2] ftsmc020: enhanced features and unnested structures
http://patchwork.ozlabs.org/patch/89078/
Thanks.
--
Best regards,
Macpaul Lin
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-04-27 17:40 Albert ARIBAUD
@ 2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
0 siblings, 1 reply; 261+ messages in thread
From: Wolfgang Denk @ 2011-04-27 20:16 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4DB854FD.2090902@aribaud.net> you wrote:
> Wolfgang,
>
> The following changes since commit a01ebd9679f07421ec5abfda5dc0ab76c7202d3b:
>
> mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.
> (2011-04-26 00:25:05 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm master
>
> Albert ARIBAUD (1):
> Replace obsolete e-mail address
>
> Alessandro Rubini (3):
> nhk8815: remove platform.S, which was unused at link time
> nhk8815: add support for relocation
> nhk8815: move config targets from Makefile to boards.cfg
>
> Alexander Holler (4):
> omap3_beagle: enable the use of a plain text file
> OMAP3: Change some USB related MUX values
> OMAP3: Add support for DPLL5 (usbhost)
> omap3_beagle: enable EHCI and USB storage.
>
> Enric Balletbo i Serra (2):
> ARM: OMAP3: Revamp IGEP v2 default
> ARM: OMAP3: Revamp IGEP module default configuration
>
> Eric Benard (2):
> cpu9260: update board support
> cpuat91: fix board support
>
> Eric Cooper (1):
> ARM: fix stack pointer adjustment in board_init_f()
>
> Fabio Estevam (6):
> mx25: Make the UART port number explicit in its setup function
> ARM: mx31: Print the silicon version
> MX31: Introduce get_reset_cause()
> MX31: mx31pdk: Make the board name simpler.
> ARM: MX31: Fix file name label
> MX25: tx25: Add _end section on nand_spl
>
> Igor Grinberg (9):
> OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope
> OMAP3: CM-T35: update config
> OMAP3: CM-T35: update board files header information
> OMAP3: CM-T35: update MAINTAINERS file
> OMAP3: CM-T35: add MMC1 pinmux
> OMAP3: CM-T35: fix mmc
> OMAP3: CM-T35: remove redundand i2c initialization
> OMAP3: CM-T35: enable the green LED
> OMAP3: CM-T35: Add support for CM-T3730
>
> Jason Kridner (2):
> Add 'led' command
> BeagleBoard: Added LED driver
>
> Jason Liu (1):
> MX5: factor out boot cause funciton to common code
>
> Koen Kooi (2):
> OMAP3: BeagleBoard: add xM rev B to ID table
> OMAP3: BeagleBoard: add more expansionboard IDs
>
> Lei Wen (6):
> pxa: move i2c driver to the common place
> mv_i2c: fix timeout value to be consistent with comments
> mv_i2c: use structure to replace the direclty define
> I2C: add i2c support for Pantheon platform
> I2C: mv_i2c: add multi bus support
> I2C: add i2c support for Armada100 platform
>
> Liu Hui-R64343 (2):
> MX53: drop config.mk from mx53evk
> MX5: Enable flat-device-tree support on mx51/53 evk board
>
> Luca Ceresoli (4):
> ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
> ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
> ARMV7: OMAP3: Cleanup extern variables in mem.c
> ARMV7: OMAP3: Add support for Comelit DIG297 board
>
> Macpaul Lin (6):
> ftpmu010: fix relocation and enhance features
> ftpmu010.h: add asm support used by lowlevel_init
> fttmr010: move fttmr010 header to include/faraday
> a320evb: fix include path of timer fttmr010
> ftsdmc020: move ftsdmc020.h to include/faraday
> ftsmc020: move ftsmc020 static mem controller to driver/mtd
>
> Matt Waddel (1):
> ARMV7: Vexpress: Remove config.mk
>
> Matthias Weisser (1):
> arm: Use optimized memcpy and memset from linux
>
> Minkyu Kang (1):
> Don't grab memory for LCD if FB address is defined
>
> Po-Yu Chuang (2):
> power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday
> arm: a320: use new ftpmu010 API
>
> Rogan Dawes (1):
> Orion5x: Correct DRAM bank detection
>
> Srinath (1):
> ARMV7: AM3517/05: Add support for CraneBoard.
>
> Stefano Babic (7):
> Makefile: change rule to build IMX image
> MX51: drop config.mk from mx51evk
> MX31: add support for MX31 watchdog
> MX31: qong: add watchdog
> IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
> MX31: drop warnings in get_cpu_rev
> MX31: mx31pdk: fix nand_spl
>
> Steve Kipisz (1):
> OMAP3: BeagleBoard: Enable pullups on i2c2.
>
> Sughosh Ganu (1):
> Fix the issue of _end symbol not being found while building
>
> Tom Warren (4):
> arm: Tegra2: add support for A9 CPU init
> arm: Tegra2: Add missing PLLX init
> arm: Tegra2: GPIO: Add basic GPIO definitions
> arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init
>
> MAINTAINERS | 18 +-
> MAKEALL | 2 +
> Makefile | 21 +-
> README | 20 +
> arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 59 +++-
> arch/arm/cpu/arm1136/mx31/timer.c | 40 ++-
> arch/arm/cpu/arm920t/a320/Makefile | 1 -
> arch/arm/cpu/arm920t/a320/timer.c | 25 +-
> arch/arm/cpu/arm926ejs/armada100/cpu.c | 16 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/orion5x/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +-
> arch/arm/cpu/arm926ejs/orion5x/dram.c | 4 +-
> arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S | 2 +-
> arch/arm/cpu/arm926ejs/orion5x/timer.c | 2 +-
> arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 +
> arch/arm/cpu/arm926ejs/start.S | 2 +-
> arch/arm/cpu/arm946es/start.S | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 28 ++
> arch/arm/cpu/armv7/omap3/clock.c | 20 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 22 ++
> arch/arm/cpu/armv7/omap3/mem.c | 32 --
> arch/arm/cpu/armv7/start.S | 14 +-
> arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
> arch/arm/cpu/armv7/tegra2/ap20.c | 358
> ++++++++++++++++++
> arch/arm/cpu/armv7/tegra2/ap20.h | 104 +++++
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 94 +++++
> arch/arm/cpu/pxa/Makefile | 1 -
> arch/arm/cpu/pxa/cpu.c | 10 +
> arch/arm/include/asm/arch-armada100/config.h | 12 +
> arch/arm/include/asm/arch-armada100/mfp.h | 40 ++-
> arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
> .../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 41 ++-
> arch/arm/include/asm/arch-omap3/clocks.h | 1 +
> arch/arm/include/asm/arch-omap3/clocks_omap3.h | 26 ++
> arch/arm/include/asm/arch-omap3/cpu.h | 21 +-
> arch/arm/include/asm/arch-omap3/ehci_omap3.h | 58 +++
> arch/arm/include/asm/arch-omap3/omap3-regs.h | 95 +++++
> arch/arm/include/asm/arch-omap3/omap3.h | 14 +
> arch/arm/include/asm/arch-orion5x/cpu.h | 2 +-
> arch/arm/include/asm/arch-orion5x/mv88f5182.h | 2 +-
> arch/arm/include/asm/arch-orion5x/orion5x.h | 3 +-
> arch/arm/include/asm/arch-pantheon/config.h | 10 +
> arch/arm/include/asm/arch-pantheon/cpu.h | 4 +-
> arch/arm/include/asm/arch-pantheon/mfp.h | 6 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 56 ---
> arch/arm/include/asm/arch-tegra2/clk_rst.h | 33 ++-
> arch/arm/include/asm/arch-tegra2/gpio.h | 59 +++
> arch/arm/include/asm/arch-tegra2/pmc.h | 8 +
> arch/arm/include/asm/arch-tegra2/scu.h | 43 +++
> arch/arm/include/asm/arch-tegra2/tegra2.h | 9 +
> arch/arm/include/asm/assembler.h | 60 +++
> arch/arm/include/asm/string.h | 10 +-
> arch/arm/lib/Makefile | 2 +
> arch/arm/lib/board.c | 6 +-
> arch/arm/lib/memcpy.S | 241 ++++++++++++
> arch/arm/lib/memset.S | 126 +++++++
> arch/m68k/lib/board.c | 4 +
> arch/powerpc/lib/board.c | 4 +
> board/LaCie/edminiv2/Makefile | 2 +-
> board/LaCie/edminiv2/config.mk | 2 +-
> board/LaCie/edminiv2/edminiv2.c | 2 +-
> board/Marvell/aspenite/aspenite.c | 5 +
> board/Marvell/dkb/dkb.c | 4 +
> board/armltd/vexpress/config.mk | 22 --
> board/cm_t35/Makefile | 2 +-
> board/cm_t35/cm_t35.c | 116 ++++--
> board/cm_t35/leds.c | 45 +++
> .../mx51evk/config.mk => comelit/dig297/Makefile} | 32 ++-
> board/comelit/dig297/dig297.c | 187 +++++++++
> board/comelit/dig297/dig297.h | 383
> +++++++++++++++++++
> board/davedenx/qong/fpga.c | 4 +-
> board/davedenx/qong/lowlevel_init.S | 2 +-
> board/davedenx/qong/qong.c | 16 +-
> board/eukrea/cpu9260/config.mk | 1 -
> board/eukrea/cpu9260/cpu9260.c | 161 ++++-----
> board/eukrea/cpu9260/led.c | 36 +-
> board/eukrea/cpuat91/Makefile | 4 +-
> board/eukrea/cpuat91/config.mk | 1 -
> board/eukrea/cpuat91/cpuat91.c | 11 +-
> board/faraday/a320evb/a320evb.c | 2 +-
> board/faraday/a320evb/lowlevel_init.S | 2 +-
> board/freescale/mx31ads/lowlevel_init.S | 2 +-
> board/freescale/mx31ads/mx31ads.c | 4 +-
> board/freescale/mx31pdk/lowlevel_init.S | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 6 +-
> board/freescale/mx53evk/config.mk | 24 --
> board/imx31_phycore/imx31_phycore.c | 4 +-
> board/imx31_phycore/lowlevel_init.S | 2 +-
> board/innokom/innokom.c | 9 +-
> board/karo/tx25/tx25.c | 4 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
> board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
> board/nvidia/common/board.c | 40 ++-
> .../mx31.h => board/nvidia/common/board.h | 22 +-
> board/nvidia/harmony/Makefile | 1 +
> .../mx31.h => board/nvidia/harmony/harmony.c | 25 +-
> board/nvidia/seaboard/Makefile | 1 +
> board/nvidia/seaboard/seaboard.c | 52 +++
> board/st/nhk8815/Makefile | 2 +-
> board/st/nhk8815/config.mk | 26 --
> board/st/nhk8815/nhk8815.c | 9 +-
> board/st/nhk8815/platform.S | 340
> -----------------
> board/ti/am3517crane/Makefile | 46 +++
> board/ti/am3517crane/am3517crane.c | 75 ++++
> board/ti/am3517crane/am3517crane.h | 395
> ++++++++++++++++++++
> board/ti/am3517crane/config.mk | 29 ++
> board/ti/beagle/Makefile | 4 +-
> board/ti/beagle/beagle.c | 169 ++++++++-
> board/ti/beagle/beagle.h | 42 ++-
> board/ti/beagle/led.c | 91 +++++
> boards.cfg | 18 +-
> common/cmd_led.c | 153 ++++++++
> drivers/block/mvsata_ide.c | 4 +-
> drivers/gpio/mxc_gpio.c | 5 -
> drivers/i2c/Makefile | 1 +
> arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c | 294 ++++++++-------
> drivers/i2c/mv_i2c.h | 83 ++++
> drivers/i2c/mvtwsi.c | 2 +-
> drivers/i2c/mxc_i2c.c | 7 +-
> drivers/mtd/Makefile | 1 +
> .../cpu/arm920t/a320 => drivers/mtd}/ftsmc020.c | 2 +-
> drivers/power/ftpmu010.c | 41 ++-
> drivers/power/ftpmu010.h | 146 -------
> drivers/serial/serial_mxc.c | 4 -
> drivers/spi/mxc_spi.c | 9 +-
> drivers/usb/host/ehci-mxc.c | 2 +-
> drivers/video/mx3fb.c | 6 +-
> include/configs/a320evb.h | 9 +-
> include/configs/am3517_crane.h | 332 ++++++++++++++++
> include/configs/am3517_evm.h | 18 +-
> include/configs/aspenite.h | 1 +
> include/configs/ca9x4_ct_vxp.h | 1 +
> include/configs/cm_t35.h | 57 ++--
> include/configs/cpu9260.h | 265 +++++++++-----
> include/configs/cpuat91.h | 141 ++++---
> include/configs/devkit8000.h | 10 +-
> include/configs/dig297.h | 311 +++++++++++++++
> include/configs/dkb.h | 2 +
> include/configs/edminiv2.h | 2 +-
> include/configs/harmony.h | 1 +
> include/configs/igep0020.h | 57 +++-
> include/configs/igep0030.h | 57 +++-
> include/configs/imx31_litekit.h | 2 +-
> include/configs/innokom.h | 2 +
> include/configs/mx31ads.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 5 +
> include/configs/mx53evk.h | 3 +
> include/configs/nhk8815.h | 5 +
> include/configs/omap3_beagle.h | 65 ++--
> include/configs/omap3_evm.h | 26 +-
> include/configs/omap3_overo.h | 16 +-
> include/configs/omap3_pandora.h | 16 +-
> include/configs/omap3_sdp3430.h | 10 -
> include/configs/omap3_zoom1.h | 16 +-
> include/configs/omap3_zoom2.h | 16 +-
> include/configs/qong.h | 3 +-
> include/configs/seaboard.h | 1 +
> include/configs/tegra2-common.h | 2 +
> include/configs/xm250.h | 2 +
> include/faraday/ftpmu010.h | 244 ++++++++++++
> .../asm/arch-a320 => include/faraday}/ftsdmc020.h | 0
> .../asm/arch-a320 => include/faraday}/ftsmc020.h | 0
> .../asm/arch-a320 => include/faraday}/fttmr010.h | 0
> nand_spl/board/davinci/da8xxevm/u-boot.lds | 2 +
> nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +
> nand_spl/board/karo/tx25/u-boot.lds | 2 +
> nand_spl/nand_boot_fsl_nfc.c | 4 -
> 170 files changed, 5391 insertions(+), 1496 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra2/ap20.c
> create mode 100644 arch/arm/cpu/armv7/tegra2/ap20.h
> copy arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
> rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
> create mode 100644 arch/arm/include/asm/arch-omap3/ehci_omap3.h
> create mode 100644 arch/arm/include/asm/arch-omap3/omap3-regs.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h
> create mode 100644 arch/arm/include/asm/arch-tegra2/scu.h
> create mode 100644 arch/arm/include/asm/assembler.h
> create mode 100644 arch/arm/lib/memcpy.S
> create mode 100644 arch/arm/lib/memset.S
> delete mode 100644 board/armltd/vexpress/config.mk
> create mode 100644 board/cm_t35/leds.c
> rename board/{freescale/mx51evk/config.mk => comelit/dig297/Makefile}
> (56%)
> create mode 100644 board/comelit/dig297/dig297.c
> create mode 100644 board/comelit/dig297/dig297.h
> delete mode 100644 board/eukrea/cpu9260/config.mk
> delete mode 100644 board/eukrea/cpuat91/config.mk
> delete mode 100644 board/freescale/mx53evk/config.mk
> copy arch/arm/include/asm/arch-mx31/mx31.h =>
> board/nvidia/common/board.h (67%)
> rename arch/arm/include/asm/arch-mx31/mx31.h =>
> board/nvidia/harmony/harmony.c (67%)
> create mode 100644 board/nvidia/seaboard/seaboard.c
> delete mode 100644 board/st/nhk8815/config.mk
> delete mode 100644 board/st/nhk8815/platform.S
> create mode 100644 board/ti/am3517crane/Makefile
> create mode 100644 board/ti/am3517crane/am3517crane.c
> create mode 100644 board/ti/am3517crane/am3517crane.h
> create mode 100644 board/ti/am3517crane/config.mk
> create mode 100644 board/ti/beagle/led.c
> create mode 100644 common/cmd_led.c
> rename arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c (65%)
> create mode 100644 drivers/i2c/mv_i2c.h
> rename {arch/arm/cpu/arm920t/a320 => drivers/mtd}/ftsmc020.c (97%)
> delete mode 100644 drivers/power/ftpmu010.h
> create mode 100644 include/configs/am3517_crane.h
> create mode 100644 include/configs/dig297.h
> create mode 100644 include/faraday/ftpmu010.h
> rename {arch/arm/include/asm/arch-a320 => include/faraday}/ftsdmc020.h
> (100%)
> rename {arch/arm/include/asm/arch-a320 => include/faraday}/ftsmc020.h
> (100%)
> rename {arch/arm/include/asm/arch-a320 => include/faraday}/fttmr010.h
> (100%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No one can guarantee the actions of another.
-- Spock, "Day of the Dove", stardate unknown
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-04-27 17:40 UTC (permalink / raw)
To: u-boot
Wolfgang,
The following changes since commit a01ebd9679f07421ec5abfda5dc0ab76c7202d3b:
mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.
(2011-04-26 00:25:05 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
Albert ARIBAUD (1):
Replace obsolete e-mail address
Alessandro Rubini (3):
nhk8815: remove platform.S, which was unused at link time
nhk8815: add support for relocation
nhk8815: move config targets from Makefile to boards.cfg
Alexander Holler (4):
omap3_beagle: enable the use of a plain text file
OMAP3: Change some USB related MUX values
OMAP3: Add support for DPLL5 (usbhost)
omap3_beagle: enable EHCI and USB storage.
Enric Balletbo i Serra (2):
ARM: OMAP3: Revamp IGEP v2 default
ARM: OMAP3: Revamp IGEP module default configuration
Eric Benard (2):
cpu9260: update board support
cpuat91: fix board support
Eric Cooper (1):
ARM: fix stack pointer adjustment in board_init_f()
Fabio Estevam (6):
mx25: Make the UART port number explicit in its setup function
ARM: mx31: Print the silicon version
MX31: Introduce get_reset_cause()
MX31: mx31pdk: Make the board name simpler.
ARM: MX31: Fix file name label
MX25: tx25: Add _end section on nand_spl
Igor Grinberg (9):
OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope
OMAP3: CM-T35: update config
OMAP3: CM-T35: update board files header information
OMAP3: CM-T35: update MAINTAINERS file
OMAP3: CM-T35: add MMC1 pinmux
OMAP3: CM-T35: fix mmc
OMAP3: CM-T35: remove redundand i2c initialization
OMAP3: CM-T35: enable the green LED
OMAP3: CM-T35: Add support for CM-T3730
Jason Kridner (2):
Add 'led' command
BeagleBoard: Added LED driver
Jason Liu (1):
MX5: factor out boot cause funciton to common code
Koen Kooi (2):
OMAP3: BeagleBoard: add xM rev B to ID table
OMAP3: BeagleBoard: add more expansionboard IDs
Lei Wen (6):
pxa: move i2c driver to the common place
mv_i2c: fix timeout value to be consistent with comments
mv_i2c: use structure to replace the direclty define
I2C: add i2c support for Pantheon platform
I2C: mv_i2c: add multi bus support
I2C: add i2c support for Armada100 platform
Liu Hui-R64343 (2):
MX53: drop config.mk from mx53evk
MX5: Enable flat-device-tree support on mx51/53 evk board
Luca Ceresoli (4):
ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
ARMV7: OMAP3: Cleanup extern variables in mem.c
ARMV7: OMAP3: Add support for Comelit DIG297 board
Macpaul Lin (6):
ftpmu010: fix relocation and enhance features
ftpmu010.h: add asm support used by lowlevel_init
fttmr010: move fttmr010 header to include/faraday
a320evb: fix include path of timer fttmr010
ftsdmc020: move ftsdmc020.h to include/faraday
ftsmc020: move ftsmc020 static mem controller to driver/mtd
Matt Waddel (1):
ARMV7: Vexpress: Remove config.mk
Matthias Weisser (1):
arm: Use optimized memcpy and memset from linux
Minkyu Kang (1):
Don't grab memory for LCD if FB address is defined
Po-Yu Chuang (2):
power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday
arm: a320: use new ftpmu010 API
Rogan Dawes (1):
Orion5x: Correct DRAM bank detection
Srinath (1):
ARMV7: AM3517/05: Add support for CraneBoard.
Stefano Babic (7):
Makefile: change rule to build IMX image
MX51: drop config.mk from mx51evk
MX31: add support for MX31 watchdog
MX31: qong: add watchdog
IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
MX31: drop warnings in get_cpu_rev
MX31: mx31pdk: fix nand_spl
Steve Kipisz (1):
OMAP3: BeagleBoard: Enable pullups on i2c2.
Sughosh Ganu (1):
Fix the issue of _end symbol not being found while building
Tom Warren (4):
arm: Tegra2: add support for A9 CPU init
arm: Tegra2: Add missing PLLX init
arm: Tegra2: GPIO: Add basic GPIO definitions
arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init
MAINTAINERS | 18 +-
MAKEALL | 2 +
Makefile | 21 +-
README | 20 +
arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
arch/arm/cpu/arm1136/mx31/generic.c | 59 +++-
arch/arm/cpu/arm1136/mx31/timer.c | 40 ++-
arch/arm/cpu/arm920t/a320/Makefile | 1 -
arch/arm/cpu/arm920t/a320/timer.c | 25 +-
arch/arm/cpu/arm926ejs/armada100/cpu.c | 16 +
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/orion5x/Makefile | 2 +-
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +-
arch/arm/cpu/arm926ejs/orion5x/dram.c | 4 +-
arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S | 2 +-
arch/arm/cpu/arm926ejs/orion5x/timer.c | 2 +-
arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 +
arch/arm/cpu/arm926ejs/start.S | 2 +-
arch/arm/cpu/arm946es/start.S | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 28 ++
arch/arm/cpu/armv7/omap3/clock.c | 20 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 22 ++
arch/arm/cpu/armv7/omap3/mem.c | 32 --
arch/arm/cpu/armv7/start.S | 14 +-
arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
arch/arm/cpu/armv7/tegra2/ap20.c | 358
++++++++++++++++++
arch/arm/cpu/armv7/tegra2/ap20.h | 104 +++++
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 94 +++++
arch/arm/cpu/pxa/Makefile | 1 -
arch/arm/cpu/pxa/cpu.c | 10 +
arch/arm/include/asm/arch-armada100/config.h | 12 +
arch/arm/include/asm/arch-armada100/mfp.h | 40 ++-
arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
.../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 41 ++-
arch/arm/include/asm/arch-omap3/clocks.h | 1 +
arch/arm/include/asm/arch-omap3/clocks_omap3.h | 26 ++
arch/arm/include/asm/arch-omap3/cpu.h | 21 +-
arch/arm/include/asm/arch-omap3/ehci_omap3.h | 58 +++
arch/arm/include/asm/arch-omap3/omap3-regs.h | 95 +++++
arch/arm/include/asm/arch-omap3/omap3.h | 14 +
arch/arm/include/asm/arch-orion5x/cpu.h | 2 +-
arch/arm/include/asm/arch-orion5x/mv88f5182.h | 2 +-
arch/arm/include/asm/arch-orion5x/orion5x.h | 3 +-
arch/arm/include/asm/arch-pantheon/config.h | 10 +
arch/arm/include/asm/arch-pantheon/cpu.h | 4 +-
arch/arm/include/asm/arch-pantheon/mfp.h | 6 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 56 ---
arch/arm/include/asm/arch-tegra2/clk_rst.h | 33 ++-
arch/arm/include/asm/arch-tegra2/gpio.h | 59 +++
arch/arm/include/asm/arch-tegra2/pmc.h | 8 +
arch/arm/include/asm/arch-tegra2/scu.h | 43 +++
arch/arm/include/asm/arch-tegra2/tegra2.h | 9 +
arch/arm/include/asm/assembler.h | 60 +++
arch/arm/include/asm/string.h | 10 +-
arch/arm/lib/Makefile | 2 +
arch/arm/lib/board.c | 6 +-
arch/arm/lib/memcpy.S | 241 ++++++++++++
arch/arm/lib/memset.S | 126 +++++++
arch/m68k/lib/board.c | 4 +
arch/powerpc/lib/board.c | 4 +
board/LaCie/edminiv2/Makefile | 2 +-
board/LaCie/edminiv2/config.mk | 2 +-
board/LaCie/edminiv2/edminiv2.c | 2 +-
board/Marvell/aspenite/aspenite.c | 5 +
board/Marvell/dkb/dkb.c | 4 +
board/armltd/vexpress/config.mk | 22 --
board/cm_t35/Makefile | 2 +-
board/cm_t35/cm_t35.c | 116 ++++--
board/cm_t35/leds.c | 45 +++
.../mx51evk/config.mk => comelit/dig297/Makefile} | 32 ++-
board/comelit/dig297/dig297.c | 187 +++++++++
board/comelit/dig297/dig297.h | 383
+++++++++++++++++++
board/davedenx/qong/fpga.c | 4 +-
board/davedenx/qong/lowlevel_init.S | 2 +-
board/davedenx/qong/qong.c | 16 +-
board/eukrea/cpu9260/config.mk | 1 -
board/eukrea/cpu9260/cpu9260.c | 161 ++++-----
board/eukrea/cpu9260/led.c | 36 +-
board/eukrea/cpuat91/Makefile | 4 +-
board/eukrea/cpuat91/config.mk | 1 -
board/eukrea/cpuat91/cpuat91.c | 11 +-
board/faraday/a320evb/a320evb.c | 2 +-
board/faraday/a320evb/lowlevel_init.S | 2 +-
board/freescale/mx31ads/lowlevel_init.S | 2 +-
board/freescale/mx31ads/mx31ads.c | 4 +-
board/freescale/mx31pdk/lowlevel_init.S | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 6 +-
board/freescale/mx53evk/config.mk | 24 --
board/imx31_phycore/imx31_phycore.c | 4 +-
board/imx31_phycore/lowlevel_init.S | 2 +-
board/innokom/innokom.c | 9 +-
board/karo/tx25/tx25.c | 4 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
board/nvidia/common/board.c | 40 ++-
.../mx31.h => board/nvidia/common/board.h | 22 +-
board/nvidia/harmony/Makefile | 1 +
.../mx31.h => board/nvidia/harmony/harmony.c | 25 +-
board/nvidia/seaboard/Makefile | 1 +
board/nvidia/seaboard/seaboard.c | 52 +++
board/st/nhk8815/Makefile | 2 +-
board/st/nhk8815/config.mk | 26 --
board/st/nhk8815/nhk8815.c | 9 +-
board/st/nhk8815/platform.S | 340
-----------------
board/ti/am3517crane/Makefile | 46 +++
board/ti/am3517crane/am3517crane.c | 75 ++++
board/ti/am3517crane/am3517crane.h | 395
++++++++++++++++++++
board/ti/am3517crane/config.mk | 29 ++
board/ti/beagle/Makefile | 4 +-
board/ti/beagle/beagle.c | 169 ++++++++-
board/ti/beagle/beagle.h | 42 ++-
board/ti/beagle/led.c | 91 +++++
boards.cfg | 18 +-
common/cmd_led.c | 153 ++++++++
drivers/block/mvsata_ide.c | 4 +-
drivers/gpio/mxc_gpio.c | 5 -
drivers/i2c/Makefile | 1 +
arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c | 294 ++++++++-------
drivers/i2c/mv_i2c.h | 83 ++++
drivers/i2c/mvtwsi.c | 2 +-
drivers/i2c/mxc_i2c.c | 7 +-
drivers/mtd/Makefile | 1 +
.../cpu/arm920t/a320 => drivers/mtd}/ftsmc020.c | 2 +-
drivers/power/ftpmu010.c | 41 ++-
drivers/power/ftpmu010.h | 146 -------
drivers/serial/serial_mxc.c | 4 -
drivers/spi/mxc_spi.c | 9 +-
drivers/usb/host/ehci-mxc.c | 2 +-
drivers/video/mx3fb.c | 6 +-
include/configs/a320evb.h | 9 +-
include/configs/am3517_crane.h | 332 ++++++++++++++++
include/configs/am3517_evm.h | 18 +-
include/configs/aspenite.h | 1 +
include/configs/ca9x4_ct_vxp.h | 1 +
include/configs/cm_t35.h | 57 ++--
include/configs/cpu9260.h | 265 +++++++++-----
include/configs/cpuat91.h | 141 ++++---
include/configs/devkit8000.h | 10 +-
include/configs/dig297.h | 311 +++++++++++++++
include/configs/dkb.h | 2 +
include/configs/edminiv2.h | 2 +-
include/configs/harmony.h | 1 +
include/configs/igep0020.h | 57 +++-
include/configs/igep0030.h | 57 +++-
include/configs/imx31_litekit.h | 2 +-
include/configs/innokom.h | 2 +
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 5 +
include/configs/mx53evk.h | 3 +
include/configs/nhk8815.h | 5 +
include/configs/omap3_beagle.h | 65 ++--
include/configs/omap3_evm.h | 26 +-
include/configs/omap3_overo.h | 16 +-
include/configs/omap3_pandora.h | 16 +-
include/configs/omap3_sdp3430.h | 10 -
include/configs/omap3_zoom1.h | 16 +-
include/configs/omap3_zoom2.h | 16 +-
include/configs/qong.h | 3 +-
include/configs/seaboard.h | 1 +
include/configs/tegra2-common.h | 2 +
include/configs/xm250.h | 2 +
include/faraday/ftpmu010.h | 244 ++++++++++++
.../asm/arch-a320 => include/faraday}/ftsdmc020.h | 0
.../asm/arch-a320 => include/faraday}/ftsmc020.h | 0
.../asm/arch-a320 => include/faraday}/fttmr010.h | 0
nand_spl/board/davinci/da8xxevm/u-boot.lds | 2 +
nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +
nand_spl/board/karo/tx25/u-boot.lds | 2 +
nand_spl/nand_boot_fsl_nfc.c | 4 -
170 files changed, 5391 insertions(+), 1496 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/ap20.c
create mode 100644 arch/arm/cpu/armv7/tegra2/ap20.h
copy arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
create mode 100644 arch/arm/include/asm/arch-omap3/ehci_omap3.h
create mode 100644 arch/arm/include/asm/arch-omap3/omap3-regs.h
create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h
create mode 100644 arch/arm/include/asm/arch-tegra2/scu.h
create mode 100644 arch/arm/include/asm/assembler.h
create mode 100644 arch/arm/lib/memcpy.S
create mode 100644 arch/arm/lib/memset.S
delete mode 100644 board/armltd/vexpress/config.mk
create mode 100644 board/cm_t35/leds.c
rename board/{freescale/mx51evk/config.mk => comelit/dig297/Makefile}
(56%)
create mode 100644 board/comelit/dig297/dig297.c
create mode 100644 board/comelit/dig297/dig297.h
delete mode 100644 board/eukrea/cpu9260/config.mk
delete mode 100644 board/eukrea/cpuat91/config.mk
delete mode 100644 board/freescale/mx53evk/config.mk
copy arch/arm/include/asm/arch-mx31/mx31.h =>
board/nvidia/common/board.h (67%)
rename arch/arm/include/asm/arch-mx31/mx31.h =>
board/nvidia/harmony/harmony.c (67%)
create mode 100644 board/nvidia/seaboard/seaboard.c
delete mode 100644 board/st/nhk8815/config.mk
delete mode 100644 board/st/nhk8815/platform.S
create mode 100644 board/ti/am3517crane/Makefile
create mode 100644 board/ti/am3517crane/am3517crane.c
create mode 100644 board/ti/am3517crane/am3517crane.h
create mode 100644 board/ti/am3517crane/config.mk
create mode 100644 board/ti/beagle/led.c
create mode 100644 common/cmd_led.c
rename arch/arm/cpu/pxa/i2c.c => drivers/i2c/mv_i2c.c (65%)
create mode 100644 drivers/i2c/mv_i2c.h
rename {arch/arm/cpu/arm920t/a320 => drivers/mtd}/ftsmc020.c (97%)
delete mode 100644 drivers/power/ftpmu010.h
create mode 100644 include/configs/am3517_crane.h
create mode 100644 include/configs/dig297.h
create mode 100644 include/faraday/ftpmu010.h
rename {arch/arm/include/asm/arch-a320 => include/faraday}/ftsdmc020.h
(100%)
rename {arch/arm/include/asm/arch-a320 => include/faraday}/ftsmc020.h
(100%)
rename {arch/arm/include/asm/arch-a320 => include/faraday}/fttmr010.h
(100%)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
2011-03-27 17:25 Albert ARIBAUD
@ 2011-03-27 19:32 ` Wolfgang Denk
0 siblings, 0 replies; 261+ messages in thread
From: Wolfgang Denk @ 2011-03-27 19:32 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4D8F7315.8060201@free.fr> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 55f7934d2b07a62027cb05484ea3f10666a855d1:
>
> strmhz: Make hz unsigned to support greater than 2146 MHz clock
> (2011-03-22 23:34:36 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-arm.git master
>
> Chander Kashyap (2):
> ARMV7: S5P: Fixed register offset in mmc.h
> S5P: mmc: Resolved interrupt error during mmc_init
>
> Donghwa Lee (1):
> ARM: S5P: pwm driver support
>
> Minkyu Kang (5):
> S5P: timer: Use pwm functions
> S5P: smdkc100: Enable the pwm driver
> S5P: goni: Enable the pwm driver
> S5P: universal: Enable the pwm driver
> S5P: timer: replace bss variable by gd
>
> Po-Yu Chuang (2):
> rename _end to __bss_end__
> arm: fix incorrect monitor protection region in FLASH
>
> Tom Warren (1):
> arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to
> mach-types.h update
>
> seedshope (6):
> SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined
> SMDK6400: Fix some label undefined in build error
> SMDK6400: Fix the mutiple link error
> SMDK6400: Add some labels to u-boot.lds to support nand_spl
> SMDK6400: Disable LED function in start.s on the nand booting
> SMDK6400: Fixup dram_init for relocation support
...
> 259 files changed, 680 insertions(+), 329 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/s5p-common/pwm.c
> create mode 100644 include/pwm.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Machines take me by surprise with great frequency. - Alan Turing
^ permalink raw reply [flat|nested] 261+ messages in thread
* [U-Boot] Pull request: u-boot-arm/master
@ 2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
0 siblings, 1 reply; 261+ messages in thread
From: Albert ARIBAUD @ 2011-03-27 17:25 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit 55f7934d2b07a62027cb05484ea3f10666a855d1:
strmhz: Make hz unsigned to support greater than 2146 MHz clock
(2011-03-22 23:34:36 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Chander Kashyap (2):
ARMV7: S5P: Fixed register offset in mmc.h
S5P: mmc: Resolved interrupt error during mmc_init
Donghwa Lee (1):
ARM: S5P: pwm driver support
Minkyu Kang (5):
S5P: timer: Use pwm functions
S5P: smdkc100: Enable the pwm driver
S5P: goni: Enable the pwm driver
S5P: universal: Enable the pwm driver
S5P: timer: replace bss variable by gd
Po-Yu Chuang (2):
rename _end to __bss_end__
arm: fix incorrect monitor protection region in FLASH
Tom Warren (1):
arm: Tegra2: Change mach-type to MACH_TYPE_SEABOARD due to
mach-types.h update
seedshope (6):
SMDK6400: Fix CONFIG_SYS_INIT_SP_ADDR undefined
SMDK6400: Fix some label undefined in build error
SMDK6400: Fix the mutiple link error
SMDK6400: Add some labels to u-boot.lds to support nand_spl
SMDK6400: Disable LED function in start.s on the nand booting
SMDK6400: Fixup dram_init for relocation support
arch/arm/cpu/arm1136/start.S | 4 +
arch/arm/cpu/arm1136/u-boot.lds | 4 +-
arch/arm/cpu/arm1176/start.S | 6 +
arch/arm/cpu/arm1176/u-boot.lds | 4 +-
arch/arm/cpu/arm720t/start.S | 4 +
arch/arm/cpu/arm720t/u-boot.lds | 4 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 2 +
arch/arm/cpu/arm920t/start.S | 4 +
arch/arm/cpu/arm920t/u-boot.lds | 4 +-
arch/arm/cpu/arm925t/start.S | 4 +
arch/arm/cpu/arm925t/u-boot.lds | 4 +-
arch/arm/cpu/arm926ejs/start.S | 4 +
arch/arm/cpu/arm926ejs/u-boot.lds | 4 +-
arch/arm/cpu/arm946es/start.S | 4 +
arch/arm/cpu/arm946es/u-boot.lds | 4 +-
arch/arm/cpu/arm_intcm/start.S | 4 +
arch/arm/cpu/arm_intcm/u-boot.lds | 4 +-
arch/arm/cpu/armv7/s5p-common/Makefile | 1 +
arch/arm/cpu/armv7/s5p-common/pwm.c | 189
++++++++++++++++++++++
arch/arm/cpu/armv7/s5p-common/timer.c | 76 ++-------
arch/arm/cpu/armv7/start.S | 4 +
arch/arm/cpu/armv7/u-boot.lds | 4 +-
arch/arm/cpu/ixp/start.S | 4 +
arch/arm/cpu/ixp/u-boot.lds | 4 +-
arch/arm/cpu/lh7a40x/start.S | 4 +
arch/arm/cpu/lh7a40x/u-boot.lds | 4 +-
arch/arm/cpu/pxa/start.S | 4 +
arch/arm/cpu/pxa/u-boot.lds | 4 +-
arch/arm/cpu/s3c44b0/start.S | 4 +
arch/arm/cpu/s3c44b0/u-boot.lds | 4 +-
arch/arm/cpu/sa1100/start.S | 4 +
arch/arm/cpu/sa1100/u-boot.lds | 4 +-
arch/arm/include/asm/arch-s5pc1xx/mmc.h | 5 +-
arch/arm/include/asm/arch-s5pc1xx/pwm.h | 23 ++-
arch/arm/include/asm/arch-s5pc2xx/mmc.h | 5 +-
arch/arm/include/asm/arch-s5pc2xx/pwm.h | 23 ++-
arch/arm/include/asm/u-boot-arm.h | 1 +
arch/arm/lib/board.c | 2 +-
arch/avr32/cpu/start.S | 2 +-
arch/avr32/include/asm/sections.h | 2 +-
arch/avr32/lib/board.c | 4 +-
arch/m68k/lib/board.c | 4 +-
arch/nios2/cpu/start.S | 6 +-
arch/nios2/cpu/u-boot.lds | 2 +-
arch/powerpc/cpu/74xx_7xx/start.S | 4 +-
arch/powerpc/cpu/74xx_7xx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc512x/start.S | 4 +-
arch/powerpc/cpu/mpc512x/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc5xx/start.S | 4 +-
arch/powerpc/cpu/mpc5xx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc5xxx/start.S | 4 +-
arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 2 +-
arch/powerpc/cpu/mpc5xxx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc8220/start.S | 4 +-
arch/powerpc/cpu/mpc8220/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc824x/start.S | 4 +-
arch/powerpc/cpu/mpc824x/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc8260/start.S | 4 +-
arch/powerpc/cpu/mpc8260/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc83xx/start.S | 4 +-
arch/powerpc/cpu/mpc83xx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc85xx/start.S | 4 +-
arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 2 +-
arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds | 2 +-
arch/powerpc/cpu/mpc85xx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc86xx/start.S | 4 +-
arch/powerpc/cpu/mpc86xx/u-boot.lds | 2 +-
arch/powerpc/cpu/mpc8xx/start.S | 4 +-
arch/powerpc/cpu/ppc4xx/start.S | 4 +-
arch/powerpc/cpu/ppc4xx/u-boot.lds | 2 +-
arch/powerpc/lib/board.c | 4 +-
arch/sh/cpu/sh2/u-boot.lds | 2 +-
arch/sh/cpu/sh3/u-boot.lds | 2 +-
arch/sh/cpu/sh4/u-boot.lds | 2 +-
board/BuS/EB+MCF-EV123/u-boot.lds | 2 +-
board/LEOX/elpt860/u-boot.lds | 2 +-
board/LEOX/elpt860/u-boot.lds.debug | 2 +-
board/RPXClassic/u-boot.lds | 2 +-
board/RPXClassic/u-boot.lds.debug | 2 +-
board/RPXlite/u-boot.lds | 2 +-
board/RPXlite/u-boot.lds.debug | 2 +-
board/RPXlite_dw/u-boot.lds | 2 +-
board/RPXlite_dw/u-boot.lds.debug | 2 +-
board/RRvision/u-boot.lds | 2 +-
board/actux1/u-boot.lds | 2 +-
board/actux2/u-boot.lds | 2 +-
board/actux3/u-boot.lds | 2 +-
board/adder/u-boot.lds | 2 +-
board/altera/nios2-generic/u-boot.lds | 2 +-
board/amcc/acadia/u-boot-nand.lds | 2 +-
board/amcc/bamboo/u-boot-nand.lds | 2 +-
board/amcc/canyonlands/u-boot-nand.lds | 2 +-
board/amcc/kilauea/u-boot-nand.lds | 2 +-
board/amcc/sequoia/u-boot-nand.lds | 2 +-
board/amcc/sequoia/u-boot-ram.lds | 2 +-
board/amirix/ap1000/u-boot.lds | 2 +-
board/astro/mcf5373l/u-boot.lds | 2 +-
board/atmel/atngw100/u-boot.lds | 2 +-
board/atmel/atstk1000/u-boot.lds | 2 +-
board/c2mon/u-boot.lds | 2 +-
board/c2mon/u-boot.lds.debug | 2 +-
board/cm5200/u-boot.lds | 2 +-
board/cobra5272/u-boot.lds | 2 +-
board/cogent/u-boot.lds | 2 +-
board/cogent/u-boot.lds.debug | 2 +-
board/cray/L1/u-boot.lds.debug | 2 +-
board/dave/PPChameleonEVB/u-boot.lds | 2 +-
board/earthlcd/favr-32-ezkit/u-boot.lds | 2 +-
board/eltec/mhpc/u-boot.lds | 2 +-
board/eltec/mhpc/u-boot.lds.debug | 2 +-
board/emk/top860/u-boot.lds | 2 +-
board/emk/top860/u-boot.lds.debug | 2 +-
board/ep88x/u-boot.lds | 2 +-
board/esd/dasa_sim/u-boot.lds | 2 +-
board/esd/pmc440/u-boot-nand.lds | 2 +-
board/esd/tasreg/u-boot.lds | 2 +-
board/esteem192e/u-boot.lds | 2 +-
board/etx094/u-boot.lds | 2 +-
board/etx094/u-boot.lds.debug | 2 +-
board/evb64260/u-boot.lds | 2 +-
board/fads/u-boot.lds | 2 +-
board/flagadm/u-boot.lds | 2 +-
board/flagadm/u-boot.lds.debug | 2 +-
board/freescale/m5208evbe/u-boot.lds | 2 +-
board/freescale/m52277evb/u-boot.spa | 2 +-
board/freescale/m52277evb/u-boot.stm | 2 +-
board/freescale/m5235evb/u-boot.16 | 2 +-
board/freescale/m5235evb/u-boot.32 | 2 +-
board/freescale/m5249evb/u-boot.lds | 2 +-
board/freescale/m5253demo/u-boot.lds | 2 +-
board/freescale/m5253evbe/u-boot.lds | 2 +-
board/freescale/m5271evb/u-boot.lds | 2 +-
board/freescale/m5272c3/u-boot.lds | 2 +-
board/freescale/m5275evb/u-boot.lds | 2 +-
board/freescale/m5282evb/u-boot.lds | 2 +-
board/freescale/m53017evb/u-boot.lds | 2 +-
board/freescale/m5329evb/u-boot.lds | 2 +-
board/freescale/m5373evb/u-boot.lds | 2 +-
board/freescale/m54451evb/u-boot.spa | 2 +-
board/freescale/m54451evb/u-boot.stm | 2 +-
board/freescale/m54455evb/u-boot.atm | 2 +-
board/freescale/m54455evb/u-boot.int | 2 +-
board/freescale/m54455evb/u-boot.stm | 2 +-
board/freescale/m547xevb/u-boot.lds | 2 +-
board/freescale/m548xevb/u-boot.lds | 2 +-
board/freescale/mx31ads/u-boot.lds | 2 +-
board/gaisler/gr_cpci_ax2000/u-boot.lds | 2 +-
board/gaisler/gr_ep2s60/u-boot.lds | 2 +-
board/gaisler/gr_xc3s_1500/u-boot.lds | 2 +-
board/gaisler/grsim/u-boot.lds | 2 +-
board/gaisler/grsim_leon2/u-boot.lds | 2 +-
board/gen860t/u-boot-flashenv.lds | 2 +-
board/gen860t/u-boot.lds | 2 +-
board/genietv/u-boot.lds | 2 +-
board/genietv/u-boot.lds.debug | 2 +-
board/hermes/u-boot.lds | 2 +-
board/hermes/u-boot.lds.debug | 2 +-
board/hymod/u-boot.lds | 2 +-
board/hymod/u-boot.lds.debug | 2 +-
board/icu862/u-boot.lds | 2 +-
board/icu862/u-boot.lds.debug | 2 +-
board/idmr/u-boot.lds | 2 +-
board/ip860/u-boot.lds | 2 +-
board/ip860/u-boot.lds.debug | 2 +-
board/ivm/u-boot.lds | 2 +-
board/ivm/u-boot.lds.debug | 2 +-
board/jornada/u-boot.lds | 2 +-
board/korat/u-boot-F7FC.lds | 2 +-
board/kup/kup4k/u-boot.lds | 2 +-
board/kup/kup4k/u-boot.lds.debug | 2 +-
board/kup/kup4x/u-boot.lds | 2 +-
board/kup/kup4x/u-boot.lds.debug | 2 +-
board/lantec/u-boot.lds | 2 +-
board/lantec/u-boot.lds.debug | 2 +-
board/lwmon/u-boot.lds | 2 +-
board/lwmon/u-boot.lds.debug | 2 +-
board/manroland/uc100/u-boot.lds | 2 +-
board/matrix_vision/mvsmr/u-boot.lds | 2 +-
board/mbx8xx/u-boot.lds | 2 +-
board/mbx8xx/u-boot.lds.debug | 2 +-
board/mercury/mpq101/u-boot.lds | 2 +-
board/mimc/mimc200/u-boot.lds | 2 +-
board/miromico/hammerhead/u-boot.lds | 2 +-
board/ml2/u-boot.lds | 2 +-
board/ml2/u-boot.lds.debug | 2 +-
board/mousse/u-boot.lds | 2 +-
board/mousse/u-boot.lds.ram | 2 +-
board/mousse/u-boot.lds.rom | 2 +-
board/mpl/pip405/u-boot.lds.debug | 2 +-
board/munices/u-boot.lds | 2 +-
board/mvblue/u-boot.lds | 2 +-
board/netphone/u-boot.lds | 2 +-
board/netphone/u-boot.lds.debug | 2 +-
board/netta/u-boot.lds | 2 +-
board/netta/u-boot.lds.debug | 2 +-
board/netta2/u-boot.lds | 2 +-
board/netta2/u-boot.lds.debug | 2 +-
board/netvia/u-boot.lds | 2 +-
board/netvia/u-boot.lds.debug | 2 +-
board/nx823/u-boot.lds | 2 +-
board/nx823/u-boot.lds.debug | 2 +-
board/quantum/u-boot.lds | 2 +-
board/quantum/u-boot.lds.debug | 2 +-
board/r360mpi/u-boot.lds | 2 +-
board/rbc823/u-boot.lds | 2 +-
board/renesas/sh7757lcr/u-boot.lds | 2 +-
board/rmu/u-boot.lds | 2 +-
board/rmu/u-boot.lds.debug | 2 +-
board/rsdproto/u-boot.lds | 2 +-
board/samsung/smdk6400/smdk6400.c | 8 +-
board/samsung/smdk6400/u-boot-nand.lds | 28 +++-
board/sandburst/karef/u-boot.lds.debug | 2 +-
board/sandburst/metrobox/u-boot.lds.debug | 2 +-
board/sandpoint/u-boot.lds | 2 +-
board/sc3/u-boot.lds | 2 +-
board/siemens/IAD210/u-boot.lds | 2 +-
board/sixnet/u-boot.lds | 2 +-
board/snmc/qs850/u-boot.lds | 2 +-
board/snmc/qs860t/u-boot.lds | 2 +-
board/spc1920/u-boot.lds | 2 +-
board/spd8xx/u-boot.lds | 2 +-
board/spd8xx/u-boot.lds.debug | 2 +-
board/stx/stxxtc/u-boot.lds | 2 +-
board/stx/stxxtc/u-boot.lds.debug | 2 +-
board/svm_sc8xx/u-boot.lds | 2 +-
board/svm_sc8xx/u-boot.lds.debug | 2 +-
board/tqc/tqm8xx/u-boot.lds | 2 +-
board/tqc/tqm8xx/u-boot.lds.debug | 2 +-
board/trab/u-boot.lds | 2 +-
board/v37/u-boot.lds | 2 +-
board/w7o/u-boot.lds.debug | 2 +-
board/westel/amx860/u-boot.lds | 2 +-
board/westel/amx860/u-boot.lds.debug | 2 +-
board/xes/xpedite1000/u-boot.lds.debug | 2 +-
board/zipitz2/u-boot.lds | 2 +-
drivers/mmc/s5p_mmc.c | 2 +-
examples/standalone/mips.lds | 2 +-
examples/standalone/sparc.lds | 2 +-
examples/standalone/stubs.c | 4 +-
include/configs/s5p_goni.h | 3 +
include/configs/s5pc210_universal.h | 3 +
include/configs/seaboard.h | 2 +-
include/configs/smdk6400.h | 5 +
include/configs/smdkc100.h | 3 +
include/pwm.h | 31 ++++
nand_spl/board/amcc/acadia/u-boot.lds | 2 +-
nand_spl/board/amcc/bamboo/u-boot.lds | 2 +-
nand_spl/board/amcc/canyonlands/u-boot.lds | 2 +-
nand_spl/board/amcc/kilauea/u-boot.lds | 2 +-
nand_spl/board/amcc/sequoia/u-boot.lds | 2 +-
nand_spl/board/davinci/da8xxevm/u-boot.lds | 2 +-
nand_spl/board/freescale/mpc8313erdb/u-boot.lds | 4 +-
nand_spl/board/freescale/mpc8315erdb/u-boot.lds | 4 +-
nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +-
nand_spl/board/karo/tx25/u-boot.lds | 2 +-
nand_spl/board/samsung/smdk6400/u-boot.lds | 19 ++-
nand_spl/board/sheldon/simpc8313/u-boot.lds | 4 +-
onenand_ipl/board/apollon/u-boot.onenand.lds | 2 +-
onenand_ipl/board/vpac270/u-boot.onenand.lds | 2 +-
259 files changed, 680 insertions(+), 329 deletions(-)
create mode 100644 arch/arm/cpu/armv7/s5p-common/pwm.c
create mode 100644 include/pwm.h
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 261+ messages in thread
end of thread, other threads:[~2016-02-01 16:54 UTC | newest]
Thread overview: 261+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-10 20:33 [U-Boot] pull request: u-boot-arm/master Albert ARIBAUD
2013-07-12 12:12 ` [U-Boot] UPDATED: " Albert ARIBAUD
2013-07-12 21:24 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-01-31 20:40 [U-Boot] Pull " Albert ARIBAUD
2016-02-01 16:54 ` Tom Rini
2015-11-10 17:45 Albert ARIBAUD
2015-11-10 20:15 ` Tom Rini
2015-10-15 21:19 Albert ARIBAUD
2015-10-15 22:00 ` Tom Rini
2015-07-31 1:06 Albert ARIBAUD
2015-08-01 14:47 ` Tom Rini
2015-07-06 15:20 Albert ARIBAUD
2015-07-06 21:15 ` Tom Rini
2015-07-06 22:09 ` Albert ARIBAUD
2015-07-06 23:59 ` Tom Rini
2015-07-07 5:49 ` Albert ARIBAUD
2015-07-07 10:01 ` Albert ARIBAUD
2015-07-02 21:27 Albert ARIBAUD
2015-07-02 22:55 ` Tom Rini
2015-07-05 14:11 ` Albert ARIBAUD
2015-05-05 9:30 Albert ARIBAUD
2015-05-05 23:59 ` Tom Rini
2015-01-04 18:11 Albert ARIBAUD
2015-01-05 15:10 ` Tom Rini
2014-11-24 17:30 Albert ARIBAUD
2014-11-24 22:13 ` Tom Rini
2014-11-13 7:54 Albert ARIBAUD
2014-11-08 0:07 Albert ARIBAUD
2014-11-10 21:28 ` Tom Rini
2014-10-11 0:38 Albert ARIBAUD
2014-10-11 11:49 ` Tom Rini
2014-10-07 11:16 Albert ARIBAUD
2014-10-07 16:02 ` Tom Rini
2014-09-17 21:40 Albert ARIBAUD
2014-09-18 1:00 ` Tom Rini
2014-09-12 13:42 Albert ARIBAUD
2014-09-12 19:15 ` Tom Rini
2014-07-29 13:08 Albert ARIBAUD
2014-07-29 14:30 ` Tom Rini
2014-07-05 8:18 Albert ARIBAUD
2014-07-05 16:48 ` Tom Rini
2014-07-04 22:57 Albert ARIBAUD
2014-07-05 0:20 ` Tom Rini
2014-07-02 20:33 Albert ARIBAUD
2014-07-02 22:38 ` Tom Rini
2014-06-08 7:51 Albert ARIBAUD
2014-06-09 2:25 ` Tom Rini
2014-05-30 15:20 Albert ARIBAUD
2014-05-30 17:59 ` Tom Rini
2014-05-24 9:32 Albert ARIBAUD
2014-05-24 20:37 ` Tom Rini
2014-05-20 8:57 Albert ARIBAUD
2014-05-22 19:12 ` Tom Rini
2014-05-09 9:56 Albert ARIBAUD
2014-05-09 16:15 ` Tom Rini
2014-04-08 11:40 Albert ARIBAUD
2014-04-08 16:39 ` Tom Rini
2014-03-10 18:16 Albert ARIBAUD
2014-03-10 21:27 ` Tom Rini
2014-02-26 21:40 Albert ARIBAUD
2014-02-26 23:39 ` Tom Rini
2014-02-13 17:43 Albert ARIBAUD
2014-02-18 17:50 ` Tom Rini
2014-02-18 18:21 ` Stephen Warren
2014-02-18 18:29 ` Tom Rini
2014-02-18 18:47 ` Albert ARIBAUD
2014-01-15 15:16 Albert ARIBAUD
2014-01-14 13:04 Albert ARIBAUD
2014-01-14 21:02 ` Tom Rini
2014-01-13 18:49 Albert ARIBAUD
2014-01-13 19:42 ` Tom Rini
2014-01-10 15:43 Albert ARIBAUD
2014-01-10 20:03 ` Tom Rini
2014-01-11 8:11 ` Albert ARIBAUD
2013-12-10 22:05 Albert ARIBAUD
2013-12-11 16:44 ` Tom Rini
2013-11-09 22:53 Albert ARIBAUD
2013-11-11 19:13 ` Tom Rini
2013-10-11 14:33 Albert ARIBAUD
2013-10-14 15:20 ` Tom Rini
2013-10-07 20:02 Albert ARIBAUD
2013-10-08 19:33 ` Tom Rini
2013-10-03 20:42 Albert ARIBAUD
2013-10-04 18:46 ` Tom Rini
2013-10-02 15:34 Albert ARIBAUD
2013-10-02 18:20 ` Tom Rini
2013-09-12 13:18 Albert ARIBAUD
2013-09-12 15:11 ` Tom Rini
2013-09-12 20:54 ` Albert ARIBAUD
2013-09-06 22:55 Albert ARIBAUD
2013-09-09 14:56 ` Tom Rini
2013-06-21 21:52 Albert ARIBAUD
2013-06-24 20:17 ` Tom Rini
2013-06-13 15:49 Albert ARIBAUD
2013-06-14 15:11 ` Tom Rini
2013-06-05 15:02 [U-Boot] pull " Albert ARIBAUD
2013-06-07 18:20 ` Tom Rini
2013-05-30 19:29 [U-Boot] Pull " Albert ARIBAUD
2013-05-31 20:51 ` Tom Rini
2013-04-17 16:37 Albert ARIBAUD
2013-04-18 20:17 ` Tom Rini
2013-04-15 19:36 Albert ARIBAUD
2013-04-16 15:58 ` Tom Rini
2013-04-14 19:32 Albert ARIBAUD
2013-04-15 15:51 ` Tom Rini
2013-04-10 23:12 Albert ARIBAUD
2013-04-10 23:20 ` Benoît Thébaudeau
2013-04-11 6:10 ` Albert ARIBAUD
2013-03-28 20:06 Albert ARIBAUD
2013-03-29 0:01 ` Tom Rini
2013-03-15 22:01 Albert ARIBAUD
2013-03-16 8:19 ` Albert ARIBAUD
2013-03-17 19:40 ` Tom Rini
2013-03-18 17:06 ` Tom Rini
2013-03-18 17:43 ` Albert ARIBAUD
2013-03-18 18:38 ` Tom Rini
2013-02-12 14:25 Albert ARIBAUD
2013-02-15 16:33 ` Tom Rini
2013-01-14 16:58 Albert ARIBAUD
2013-01-14 23:18 ` Tom Rini
2013-01-11 21:36 Albert ARIBAUD
2013-01-11 23:44 ` Tom Rini
2013-01-09 14:43 Albert ARIBAUD
2013-01-09 19:35 ` Tom Rini
2013-01-08 15:07 Albert ARIBAUD
2013-01-08 20:50 ` Simon Glass
2013-01-08 21:01 ` Albert ARIBAUD
2013-01-08 21:06 ` Simon Glass
2013-01-08 22:34 ` Tom Rini
2012-12-22 12:11 Albert ARIBAUD
2012-12-22 15:20 ` Tom Rini
2013-01-03 6:41 ` Joonyoung Shim
2013-01-03 7:12 ` Lukasz Majewski
2012-11-04 21:51 Albert ARIBAUD
2012-11-05 16:54 ` Tom Rini
2012-11-05 19:45 ` Stephen Warren
2012-11-08 15:08 ` Tom Rini
2012-10-26 22:30 Albert ARIBAUD
2012-10-27 0:20 ` Tom Rini
2012-10-19 23:55 Albert ARIBAUD
2012-10-20 17:39 ` Tom Rini
2012-10-05 19:26 Albert ARIBAUD
2012-10-05 22:26 ` Tom Rini
2012-10-04 16:57 Albert ARIBAUD
2012-10-04 18:31 ` Tom Rini
2012-09-21 21:35 Albert ARIBAUD
2012-09-22 0:21 ` Tom Rini
2012-09-01 16:37 Albert ARIBAUD
2012-09-01 22:27 ` Wolfgang Denk
2012-07-10 6:30 Albert ARIBAUD
2012-07-10 7:04 ` Wolfgang Denk
2012-07-07 12:12 Albert ARIBAUD
2012-07-08 20:13 ` Wolfgang Denk
2012-05-15 6:57 Albert ARIBAUD
2012-05-20 20:33 ` Wolfgang Denk
2012-04-16 14:52 Albert ARIBAUD
2012-04-16 18:18 ` Marek Vasut
2012-04-16 20:09 ` Albert ARIBAUD
2012-04-16 20:15 ` Albert ARIBAUD
2012-04-17 5:33 ` Stefano Babic
2012-03-30 7:10 Albert ARIBAUD
2012-03-30 17:58 ` Wolfgang Denk
2012-02-27 20:23 Albert ARIBAUD
2012-03-03 14:09 ` Wolfgang Denk
2012-02-12 9:16 Albert ARIBAUD
2012-02-12 21:06 ` Wolfgang Denk
2012-01-16 8:16 Albert ARIBAUD
2012-01-17 21:36 ` Wolfgang Denk
2011-12-24 9:27 Albert ARIBAUD
2012-01-05 15:53 ` Wolfgang Denk
2011-12-19 16:55 Albert ARIBAUD
2011-12-20 21:40 ` Wolfgang Denk
2011-12-11 13:38 Albert ARIBAUD
2011-12-12 6:58 ` Wolfgang Denk
2011-12-09 16:42 Albert ARIBAUD
2011-12-10 21:54 ` Wolfgang Denk
2011-12-06 23:17 Albert ARIBAUD
2011-12-07 10:16 ` Wolfgang Denk
2011-11-15 21:28 Albert ARIBAUD
2011-11-16 0:04 ` Simon Glass
2011-11-16 2:27 ` Marek Vasut
2011-11-16 3:45 ` Simon Glass
2011-11-16 3:53 ` Mike Frysinger
2011-11-16 4:05 ` Simon Glass
2011-11-16 19:24 ` Wolfgang Denk
2011-11-17 13:45 ` Albert ARIBAUD
2011-11-17 21:39 ` Mike Frysinger
2011-11-17 21:56 ` Wolfgang Denk
2011-11-17 22:03 ` Albert ARIBAUD
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1740D74CB5@HQMAIL01.nvidia.com>
[not found] ` <7E91C59574E9954FA075F8D8CCDF78DB38FE7FF7A9@HQMAIL04.nvidia.com>
2011-11-17 22:04 ` Simon Glass
2011-11-16 6:28 ` Heiko Schocher
2011-11-16 19:42 ` Wolfgang Denk
2011-11-07 20:58 Albert ARIBAUD
2011-11-08 0:02 ` Wolfgang Denk
2011-09-30 20:09 Albert ARIBAUD
2011-10-01 19:40 ` Wolfgang Denk
2011-10-04 5:35 ` Simon Glass
2011-10-21 18:44 ` Albert ARIBAUD
2011-10-21 19:12 ` Simon Glass
2011-09-28 6:38 Albert ARIBAUD
2011-09-28 18:42 ` Wolfgang Denk
2011-09-22 21:03 Albert ARIBAUD
2011-09-23 6:29 ` Wolfgang Denk
2011-09-14 6:57 Albert ARIBAUD
2011-09-15 12:24 ` Wolfgang Denk
2011-08-31 10:13 Albert ARIBAUD
2011-08-31 11:57 ` Marek Vasut
2011-09-01 8:59 ` Aneesh V
2011-09-03 19:26 ` Albert ARIBAUD
2011-09-04 8:44 ` Aneesh V
2011-09-04 9:01 ` Albert ARIBAUD
2011-09-04 9:02 ` Aneesh V
2011-09-04 9:12 ` Albert ARIBAUD
2011-09-04 9:17 ` Aneesh V
2011-08-04 12:28 Albert ARIBAUD
2011-07-18 13:38 Albert ARIBAUD
2011-07-18 14:31 ` Igor Grinberg
2011-07-18 17:52 ` Albert ARIBAUD
2011-08-12 8:21 ` Albert ARIBAUD
2011-07-18 19:17 ` Wolfgang Denk
2011-07-04 9:08 Albert ARIBAUD
2011-07-04 22:32 ` Wolfgang Denk
2011-06-30 6:24 Albert ARIBAUD
2011-06-30 11:15 ` Albert ARIBAUD
2011-06-28 5:39 Albert ARIBAUD
2011-06-28 9:52 ` Igor Grinberg
2011-06-28 10:20 ` Igor Grinberg
2011-06-28 21:19 ` Albert ARIBAUD
2011-06-28 10:48 ` Wolfgang Denk
2011-06-29 6:09 ` Albert ARIBAUD
2011-06-29 21:09 ` Wolfgang Denk
2011-06-21 20:28 Albert ARIBAUD
2011-06-22 9:17 ` Wolfgang Denk
2011-06-22 12:18 ` Wolfgang Denk
2011-06-22 13:51 ` Albert ARIBAUD
2011-06-08 20:41 Albert ARIBAUD
2011-06-08 21:32 ` Wolfgang Denk
2011-05-31 20:31 Albert ARIBAUD
2011-05-31 22:29 ` John Rigby
2011-06-01 17:15 ` Albert ARIBAUD
2011-06-01 20:15 ` Wolfgang Denk
2011-05-11 21:07 Albert ARIBAUD
2011-05-11 22:11 ` Rogan Dawes
2011-05-12 5:41 ` Albert ARIBAUD
2011-05-12 8:48 ` Prafulla Wadaskar
2011-05-12 9:06 ` Simon Guinot
2011-05-12 9:12 ` Simon Guinot
2011-05-12 17:27 ` Wolfgang Denk
2011-05-14 18:38 ` Dirk Behme
2011-04-28 16:14 Albert ARIBAUD
2011-04-28 21:17 ` Wolfgang Denk
2011-04-27 17:40 Albert ARIBAUD
2011-04-27 20:16 ` Wolfgang Denk
2011-04-27 23:42 ` Macpaul Lin
2011-04-28 21:14 ` Wolfgang Denk
2011-04-29 1:31 ` Macpaul Lin
2011-04-30 20:44 ` Wolfgang Denk
2011-05-02 8:46 ` Macpaul Lin
2011-05-02 10:31 ` Wolfgang Denk
2011-03-27 17:25 Albert ARIBAUD
2011-03-27 19:32 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.