Re: [PATCH v3 0/8] irqchip: New driver for ST's SysCfg controlled IRQs

[Jason Cooper <jason@lakedaemon.net>]

Lee,

On Wed, Feb 18, 2015 at 03:13:56PM +0000, Lee Jones wrote:
> Rebased (again) and resending.
>  
> This driver enables IRQs which are controlled using System Configuration
> registers.  Without it Performance Monitoring, Core Sight Tracing and some
> L2 Caches will fail to function.
>  
> v2 => v3:
>  - Removed filename from header as suggested by Thomas
> 
> v1 => v2:
>  - Fixed up Jason's review comments
> 
> Lee Jones (8):
>   dt: bindings: Supply shared ST IRQ defines
>   irqchip: Supply new driver for STi based devices
>   irqchip: irq-st: Add documentation for STi based syscfg IRQs
...
>  .../interrupt-controller/st,sti-irq-syscfg.txt     |  35 ++++
...
>  drivers/irqchip/Kconfig                            |   7 +
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/irqchip/irq-st.c                           | 206 +++++++++++++++++++++
>  include/dt-bindings/interrupt-controller/irq-st.h  |  30 +++
...
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
>  create mode 100644 drivers/irqchip/irq-st.c
>  create mode 100644 include/dt-bindings/interrupt-controller/irq-st.h

Patches 1-3 applied to irqchip/st several days ago.  Sorry for not letting you
know earlier.  I'm just getting things back in order from hardware failures in
my build machine *and* my mailserver.  It's been a rough week.  :-/

Let me know if you'd like to use that branch as a stable base.

thx,

Jason.