[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
on the R8A7790/Lager reference board. The patchset requires the USB PHY
driver (already merged by Kishon and Greg) and the generic PHY support patches
for the HS-USB driver posted by Yoshihiro Shimoda in order to work...

[1/2] ARM: shmobile: r8a7790: add HS-USB device node
[2/2] ARM: shmobile: lager: enable HS-USB

WBR, Sergei

[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
on the R8A7790/Lager reference board. The patchset requires the USB PHY
driver (already merged by Kishon and Greg) and the generic PHY support patches
for the HS-USB driver posted by Yoshihiro Shimoda in order to work...

[1/2] ARM: shmobile: r8a7790: add HS-USB device node
[2/2] ARM: shmobile: lager: enable HS-USB

WBR, Sergei

[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
on the R8A7790/Lager reference board. The patchset requires the USB PHY
driver (already merged by Kishon and Greg) and the generic PHY support patches
for the HS-USB driver posted by Yoshihiro Shimoda in order to work...

[1/2] ARM: shmobile: r8a7790: add HS-USB device node
[2/2] ARM: shmobile: lager: enable HS-USB

WBR, Sergei

[PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Define the R8A7790 generic part of the HS-USB device node. It is up to the board
file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 3:
- uppercased "arm" in the summary;
- added changelog.

 arch/arm/boot/dts/r8a7790.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -600,6 +600,17 @@
 		status = "disabled";
 	};
 
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7790";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy@e6590100 {
 		compatible = "renesas,usb-phy-r8a7790";
 		reg = <0 0xe6590100 0 0x100>;

[PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Define the R8A7790 generic part of the HS-USB device node. It is up to the board
file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 3:
- uppercased "arm" in the summary;
- added changelog.

 arch/arm/boot/dts/r8a7790.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -600,6 +600,17 @@
 		status = "disabled";
 	};
 
+	hsusb: usb at e6590000 {
+		compatible = "renesas,usbhs-r8a7790";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy at e6590100 {
 		compatible = "renesas,usb-phy-r8a7790";
 		reg = <0 0xe6590100 0 0x100>;

[PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Define the R8A7790 generic part of the HS-USB device node. It is up to the board
file to enable the device.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: fixed summary, added changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 3:
- uppercased "arm" in the summary;
- added changelog.

 arch/arm/boot/dts/r8a7790.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -600,6 +600,17 @@
 		status = "disabled";
 	};
 
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7790";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy@e6590100 {
 		compatible = "renesas,usb-phy-r8a7790";
 		reg = <0 0xe6590100 0 0x100>;

[PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 4:
- fixed pin node name;
- moved pin node before USB0's one.

Changes in version 3:
- added pin function/group and the pinctrl-related prop;
- moved the HS-USB node to precede the USB PHY node;
- uppercased "arm" in the summary;
- supplemented changelog.

 arch/arm/boot/dts/r8a7790-lager.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts
+++ renesas/arch/arm/boot/dts/r8a7790-lager.dts
@@ -221,6 +221,11 @@
 		renesas,function = "iic3";
 	};
 
+	hsusb_pins: hsusb {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
 	usb0_pins: usb0 {
 		renesas,groups = "usb0";
 		renesas,function = "usb0";
@@ -425,6 +430,13 @@
 	pinctrl-names = "default";
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

[PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 4:
- fixed pin node name;
- moved pin node before USB0's one.

Changes in version 3:
- added pin function/group and the pinctrl-related prop;
- moved the HS-USB node to precede the USB PHY node;
- uppercased "arm" in the summary;
- supplemented changelog.

 arch/arm/boot/dts/r8a7790-lager.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts
+++ renesas/arch/arm/boot/dts/r8a7790-lager.dts
@@ -221,6 +221,11 @@
 		renesas,function = "iic3";
 	};
 
+	hsusb_pins: hsusb {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
 	usb0_pins: usb0 {
 		renesas,groups = "usb0";
 		renesas,function = "usb0";
@@ -425,6 +430,13 @@
 	pinctrl-names = "default";
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

[PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB

[Sergei Shtylyov]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>

---
Changes in version 4:
- fixed pin node name;
- moved pin node before USB0's one.

Changes in version 3:
- added pin function/group and the pinctrl-related prop;
- moved the HS-USB node to precede the USB PHY node;
- uppercased "arm" in the summary;
- supplemented changelog.

 arch/arm/boot/dts/r8a7790-lager.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts
+++ renesas/arch/arm/boot/dts/r8a7790-lager.dts
@@ -221,6 +221,11 @@
 		renesas,function = "iic3";
 	};
 
+	hsusb_pins: hsusb {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
 	usb0_pins: usb0 {
 		renesas,groups = "usb0";
 		renesas,function = "usb0";
@@ -425,6 +430,13 @@
 	pinctrl-names = "default";
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Simon Horman]

On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
> on the R8A7790/Lager reference board. The patchset requires the USB PHY
> driver (already merged by Kishon and Greg) and the generic PHY support patches
> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
> 
> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
> [2/2] ARM: shmobile: lager: enable HS-USB

Now that v3.18-rc1 is present in my devel branch should I queue-up
these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Simon Horman]

On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
> on the R8A7790/Lager reference board. The patchset requires the USB PHY
> driver (already merged by Kishon and Greg) and the generic PHY support patches
> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
> 
> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
> [2/2] ARM: shmobile: lager: enable HS-USB

Now that v3.18-rc1 is present in my devel branch should I queue-up
these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

Re: [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Simon Horman]

On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
> on the R8A7790/Lager reference board. The patchset requires the USB PHY
> driver (already merged by Kishon and Greg) and the generic PHY support patches
> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
> 
> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
> [2/2] ARM: shmobile: lager: enable HS-USB

Now that v3.18-rc1 is present in my devel branch should I queue-up
these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

Re: [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Yoshihiro Shimoda]

Hi Simon-san,

(2014/10/24 14:09), Simon Horman wrote:
> On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
>> Hello.
>>
>>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
>> on the R8A7790/Lager reference board. The patchset requires the USB PHY
>> driver (already merged by Kishon and Greg) and the generic PHY support patches
>> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
>>
>> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
>> [2/2] ARM: shmobile: lager: enable HS-USB
> 
> Now that v3.18-rc1 is present in my devel branch should I queue-up
> these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

Since the first patch set was made from me, I will rebase this.

Best regards,
Yoshihiro Shimoda

> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Yoshihiro Shimoda]

Hi Simon-san,

(2014/10/24 14:09), Simon Horman wrote:
> On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
>> Hello.
>>
>>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
>> on the R8A7790/Lager reference board. The patchset requires the USB PHY
>> driver (already merged by Kishon and Greg) and the generic PHY support patches
>> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
>>
>> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
>> [2/2] ARM: shmobile: lager: enable HS-USB
> 
> Now that v3.18-rc1 is present in my devel branch should I queue-up
> these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

Since the first patch set was made from me, I will rebase this.

Best regards,
Yoshihiro Shimoda

> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board

[Yoshihiro Shimoda]

Hi Simon-san,

(2014/10/24 14:09), Simon Horman wrote:
> On Wed, Oct 08, 2014 at 11:53:11PM +0400, Sergei Shtylyov wrote:
>> Hello.
>>
>>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-20141007-v3.17' tag. Here we add the HS-USB device tree support
>> on the R8A7790/Lager reference board. The patchset requires the USB PHY
>> driver (already merged by Kishon and Greg) and the generic PHY support patches
>> for the HS-USB driver posted by Yoshihiro Shimoda in order to work...
>>
>> [1/2] ARM: shmobile: r8a7790: add HS-USB device node
>> [2/2] ARM: shmobile: lager: enable HS-USB
> 
> Now that v3.18-rc1 is present in my devel branch should I queue-up
> these patches? If so, please rebase them on renesas-devel-20141024-v3.18-rc1

Since the first patch set was made from me, I will rebase this.

Best regards,
Yoshihiro Shimoda

> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Sergei Shtylyov]

Define the R8A7794 generic part of the HS-USB device node.
It is up to the board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against  'renesas-devel-20150914-v4.3-rc1' tag  of Simon Horman's
'renesas.git' repo plus the R8A7794/ PCI USB and USB PHY support patches posted
last week.

 arch/arm/boot/dts/r8a7794.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -718,6 +718,18 @@
 		};
 	};
 
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7794";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy@e6590100 {
 		compatible = "renesas,usb-phy-r8a7794";
 		reg = <0 0xe6590100 0 0x100>;

[PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Sergei Shtylyov]

Define the R8A7794 generic part of the HS-USB device node.
It is up to the board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against  'renesas-devel-20150914-v4.3-rc1' tag  of Simon Horman's
'renesas.git' repo plus the R8A7794/ PCI USB and USB PHY support patches posted
last week.

 arch/arm/boot/dts/r8a7794.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -718,6 +718,18 @@
 		};
 	};
 
+	hsusb: usb at e6590000 {
+		compatible = "renesas,usbhs-r8a7794";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy at e6590100 {
 		compatible = "renesas,usb-phy-r8a7794";
 		reg = <0 0xe6590100 0 0x100>;

[PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Sergei Shtylyov]

Define the R8A7794 generic part of the HS-USB device node.
It is up to the board file to enable the device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against  'renesas-devel-20150914-v4.3-rc1' tag  of Simon Horman's
'renesas.git' repo plus the R8A7794/ PCI USB and USB PHY support patches posted
last week.

 arch/arm/boot/dts/r8a7794.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -718,6 +718,18 @@
 		};
 	};
 
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7794";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	usbphy: usb-phy@e6590100 {
 		compatible = "renesas,usb-phy-r8a7794";
 		reg = <0 0xe6590100 0 0x100>;

Re: [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Simon Horman]

On Thu, Sep 17, 2015 at 02:53:58AM +0300, Sergei Shtylyov wrote:
> Define the R8A7794 generic part of the HS-USB device node.
> It is up to the board file to enable the device.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up.

[PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Simon Horman]

On Thu, Sep 17, 2015 at 02:53:58AM +0300, Sergei Shtylyov wrote:
> Define the R8A7794 generic part of the HS-USB device node.
> It is up to the board file to enable the device.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up.

Re: [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support

[Simon Horman]

On Thu, Sep 17, 2015 at 02:53:58AM +0300, Sergei Shtylyov wrote:
> Define the R8A7794 generic part of the HS-USB device node.
> It is up to the board file to enable the device.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up.

[PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Enable HS-USB device  for the Porter board, defining the GPIO that the
driver should check  when probing (which is the ID output from MAX3355
OTG chip).

Note that there  will be pinctrl-related error messages if both internal
PCI  and  HS-USB drivers are enabled but they should be just ignored.

This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
henninger: enable HS-USB) as there  are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151013v2-v4.3-rc5' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -269,6 +269,14 @@
 	status = "okay";
 };
 
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

[PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Enable HS-USB device  for the Porter board, defining the GPIO that the
driver should check  when probing (which is the ID output from MAX3355
OTG chip).

Note that there  will be pinctrl-related error messages if both internal
PCI  and  HS-USB drivers are enabled but they should be just ignored.

This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
henninger: enable HS-USB) as there  are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151013v2-v4.3-rc5' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -269,6 +269,14 @@
 	status = "okay";
 };
 
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

[PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Enable HS-USB device  for the Porter board, defining the GPIO that the
driver should check  when probing (which is the ID output from MAX3355
OTG chip).

Note that there  will be pinctrl-related error messages if both internal
PCI  and  HS-USB drivers are enabled but they should be just ignored.

This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
henninger: enable HS-USB) as there  are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151013v2-v4.3-rc5' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -269,6 +269,14 @@
 	status = "okay";
 };
 
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };

Re: [PATCH] ARM: shmobile: porter: add HS-USB DT support

[Simon Horman]

On Wed, Oct 14, 2015 at 10:35:46PM +0300, Sergei Shtylyov wrote:
> Enable HS-USB device  for the Porter board, defining the GPIO that the
> driver should check  when probing (which is the ID output from MAX3355
> OTG chip).
> 
> Note that there  will be pinctrl-related error messages if both internal
> PCI  and  HS-USB drivers are enabled but they should be just ignored.
> 
> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
> henninger: enable HS-USB) as there  are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 

Thanks Sergei,

I have queued this up for v4.5.

I took the liberty of tweaking the changelog to address a complaint made
by Mr. Check Patch.

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

[PATCH] ARM: shmobile: porter: add HS-USB DT support

[Simon Horman]

On Wed, Oct 14, 2015 at 10:35:46PM +0300, Sergei Shtylyov wrote:
> Enable HS-USB device  for the Porter board, defining the GPIO that the
> driver should check  when probing (which is the ID output from MAX3355
> OTG chip).
> 
> Note that there  will be pinctrl-related error messages if both internal
> PCI  and  HS-USB drivers are enabled but they should be just ignored.
> 
> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
> henninger: enable HS-USB) as there  are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 

Thanks Sergei,

I have queued this up for v4.5.

I took the liberty of tweaking the changelog to address a complaint made
by Mr. Check Patch.

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

Re: [PATCH] ARM: shmobile: porter: add HS-USB DT support

[Simon Horman]

On Wed, Oct 14, 2015 at 10:35:46PM +0300, Sergei Shtylyov wrote:
> Enable HS-USB device  for the Porter board, defining the GPIO that the
> driver should check  when probing (which is the ID output from MAX3355
> OTG chip).
> 
> Note that there  will be pinctrl-related error messages if both internal
> PCI  and  HS-USB drivers are enabled but they should be just ignored.
> 
> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
> henninger: enable HS-USB) as there  are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 

Thanks Sergei,

I have queued this up for v4.5.

I took the liberty of tweaking the changelog to address a complaint made
by Mr. Check Patch.

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

Re: [PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Hello.

On 10/15/2015 3:18 AM, Simon Horman wrote:

>> Enable HS-USB device  for the Porter board, defining the GPIO that the
>> driver should check  when probing (which is the ID output from MAX3355
>> OTG chip).
>>
>> Note that there  will be pinctrl-related error messages if both internal
>> PCI  and  HS-USB drivers are enabled but they should be just ignored.
>>
>> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
>> henninger: enable HS-USB) as there  are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks Sergei,
>
> I have queued this up for v4.5.
>
> I took the liberty of tweaking the changelog to address a complaint made
> by Mr. Check Patch.

    Which means I forgot to run it again. Sorry about that. :-<

> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

    Keep forgetting about the now enforced quotes...

MBR, Sergei

[PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Hello.

On 10/15/2015 3:18 AM, Simon Horman wrote:

>> Enable HS-USB device  for the Porter board, defining the GPIO that the
>> driver should check  when probing (which is the ID output from MAX3355
>> OTG chip).
>>
>> Note that there  will be pinctrl-related error messages if both internal
>> PCI  and  HS-USB drivers are enabled but they should be just ignored.
>>
>> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
>> henninger: enable HS-USB) as there  are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks Sergei,
>
> I have queued this up for v4.5.
>
> I took the liberty of tweaking the changelog to address a complaint made
> by Mr. Check Patch.

    Which means I forgot to run it again. Sorry about that. :-<

> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

    Keep forgetting about the now enforced quotes...

MBR, Sergei

Re: [PATCH] ARM: shmobile: porter: add HS-USB DT support

[Sergei Shtylyov]

Hello.

On 10/15/2015 3:18 AM, Simon Horman wrote:

>> Enable HS-USB device  for the Porter board, defining the GPIO that the
>> driver should check  when probing (which is the ID output from MAX3355
>> OTG chip).
>>
>> Note that there  will be pinctrl-related error messages if both internal
>> PCI  and  HS-USB drivers are enabled but they should be just ignored.
>>
>> This patch is  analogous  to the commit 6f4f7156e0e6 (ARM: shmobile:
>> henninger: enable HS-USB) as there  are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks Sergei,
>
> I have queued this up for v4.5.
>
> I took the liberty of tweaking the changelog to address a complaint made
> by Mr. Check Patch.

    Which means I forgot to run it again. Sorry about that. :-<

> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB")'

    Keep forgetting about the now enforced quotes...

MBR, Sergei

[PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

Define the Porter board dependent part of the CAN0 device node.

This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
henninger: add CAN0 DT support) as there are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151026-v4.3-rc7' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -134,6 +134,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -288,3 +293,10 @@
 &pciec {
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

[PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

Define the Porter board dependent part of the CAN0 device node.

This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
henninger: add CAN0 DT support) as there are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151026-v4.3-rc7' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -134,6 +134,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -288,3 +293,10 @@
 &pciec {
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

[PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

Define the Porter board dependent part of the CAN0 device node.

This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
henninger: add CAN0 DT support) as there are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151026-v4.3-rc7' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -134,6 +134,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -288,3 +293,10 @@
 &pciec {
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

Re: [PATCH] ARM: shmobile: porter: add CAN0 DT support

[Simon Horman]

On Wed, Oct 28, 2015 at 12:03:22AM +0300, Sergei Shtylyov wrote:
> Define the Porter board dependent part of the CAN0 device node.
> 
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
> henninger: add CAN0 DT support) as there are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.5 after updating the changelog
as per checkpatch.pl's insight:

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
#8: 
This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

[PATCH] ARM: shmobile: porter: add CAN0 DT support

[Simon Horman]

On Wed, Oct 28, 2015 at 12:03:22AM +0300, Sergei Shtylyov wrote:
> Define the Porter board dependent part of the CAN0 device node.
> 
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
> henninger: add CAN0 DT support) as there are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.5 after updating the changelog
as per checkpatch.pl's insight:

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
#8: 
This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

Re: [PATCH] ARM: shmobile: porter: add CAN0 DT support

[Simon Horman]

On Wed, Oct 28, 2015 at 12:03:22AM +0300, Sergei Shtylyov wrote:
> Define the Porter board dependent part of the CAN0 device node.
> 
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
> henninger: add CAN0 DT support) as there are no differences between the
> boards in this respect.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.5 after updating the changelog
as per checkpatch.pl's insight:

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
#8: 
This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

Re: [PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

On 10/28/2015 01:41 AM, Simon Horman wrote:

>> Define the Porter board dependent part of the CAN0 device node.
>>
>> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
>> henninger: add CAN0 DT support) as there are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks, I have queued this up for v4.5 after updating the changelog
> as per checkpatch.pl's insight:
>
> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
> #8:
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

    Oops, sorry, forgot to update the patch description.

MBR, Sergei

[PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

On 10/28/2015 01:41 AM, Simon Horman wrote:

>> Define the Porter board dependent part of the CAN0 device node.
>>
>> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
>> henninger: add CAN0 DT support) as there are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks, I have queued this up for v4.5 after updating the changelog
> as per checkpatch.pl's insight:
>
> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
> #8:
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

    Oops, sorry, forgot to update the patch description.

MBR, Sergei

Re: [PATCH] ARM: shmobile: porter: add CAN0 DT support

[Sergei Shtylyov]

On 10/28/2015 01:41 AM, Simon Horman wrote:

>> Define the Porter board dependent part of the CAN0 device node.
>>
>> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:
>> henninger: add CAN0 DT support) as there are no differences between the
>> boards in this respect.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Thanks, I have queued this up for v4.5 after updating the changelog
> as per checkpatch.pl's insight:
>
> ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support")'
> #8:
> This patch is  analogous to the commit 457acc4a6ce8 (ARM: shmobile:

    Oops, sorry, forgot to update the patch description.

MBR, Sergei

[PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   81 +++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -139,6 +162,11 @@
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
 };
 
 &scif0 {
@@ -240,6 +268,38 @@
 			};
 		};
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &sata0 {
@@ -303,3 +363,24 @@
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};

[PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   81 +++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -139,6 +162,11 @@
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
 };
 
 &scif0 {
@@ -240,6 +268,38 @@
 			};
 		};
 	};
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &sata0 {
@@ -303,3 +363,24 @@
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port at 1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};

[PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   81 +++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -139,6 +162,11 @@
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
 };
 
 &scif0 {
@@ -240,6 +268,38 @@
 			};
 		};
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &sata0 {
@@ -303,3 +363,24 @@
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Fri, Dec 25, 2015 at 01:45:30AM +0300, Sergei Shtylyov wrote:
> Define  the Porter board dependent part of the DU device node.
> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> and HDMI devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> 'renesas.git' repo.

Thanks, I have queued this up for v4.6.

[PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Fri, Dec 25, 2015 at 01:45:30AM +0300, Sergei Shtylyov wrote:
> Define  the Porter board dependent part of the DU device node.
> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> and HDMI devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> 'renesas.git' repo.

Thanks, I have queued this up for v4.6.

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Fri, Dec 25, 2015 at 01:45:30AM +0300, Sergei Shtylyov wrote:
> Define  the Porter board dependent part of the DU device node.
> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> and HDMI devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> 'renesas.git' repo.

Thanks, I have queued this up for v4.6.

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Hello.

On 12/28/2015 08:29 AM, Simon Horman wrote:

>> Define  the Porter board dependent part of the DU device node.
>> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
>> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
>> and HDMI devices.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
>> 'renesas.git' repo.
>
> Thanks, I have queued this up for v4.6.

    Actually, I was going to check this patch WRT the DU channels used, given 
Laurent's remark. OK, I will just send an incremental patch if needed.

MBR, Sergei

[PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Hello.

On 12/28/2015 08:29 AM, Simon Horman wrote:

>> Define  the Porter board dependent part of the DU device node.
>> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
>> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
>> and HDMI devices.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
>> 'renesas.git' repo.
>
> Thanks, I have queued this up for v4.6.

    Actually, I was going to check this patch WRT the DU channels used, given 
Laurent's remark. OK, I will just send an incremental patch if needed.

MBR, Sergei

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Sergei Shtylyov]

Hello.

On 12/28/2015 08:29 AM, Simon Horman wrote:

>> Define  the Porter board dependent part of the DU device node.
>> Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
>> bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
>> and HDMI devices.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
>> 'renesas.git' repo.
>
> Thanks, I have queued this up for v4.6.

    Actually, I was going to check this patch WRT the DU channels used, given 
Laurent's remark. OK, I will just send an incremental patch if needed.

MBR, Sergei

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Mon, Dec 28, 2015 at 05:35:33PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 12/28/2015 08:29 AM, Simon Horman wrote:
> 
> >>Define  the Porter board dependent part of the DU device node.
> >>Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> >>bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> >>and HDMI devices.
> >>
> >>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>
> >>---
> >>This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> >>'renesas.git' repo.
> >
> >Thanks, I have queued this up for v4.6.
> 
>    Actually, I was going to check this patch WRT the DU channels used, given
> Laurent's remark. OK, I will just send an incremental patch if needed.

Thanks and sorry for being a bit hasty.

[PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Mon, Dec 28, 2015 at 05:35:33PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 12/28/2015 08:29 AM, Simon Horman wrote:
> 
> >>Define  the Porter board dependent part of the DU device node.
> >>Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> >>bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> >>and HDMI devices.
> >>
> >>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>
> >>---
> >>This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> >>'renesas.git' repo.
> >
> >Thanks, I have queued this up for v4.6.
> 
>    Actually, I was going to check this patch WRT the DU channels used, given
> Laurent's remark. OK, I will just send an incremental patch if needed.

Thanks and sorry for being a bit hasty.

Re: [PATCH] ARM: shmobile: porter: add DU DT support

[Simon Horman]

On Mon, Dec 28, 2015 at 05:35:33PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 12/28/2015 08:29 AM, Simon Horman wrote:
> 
> >>Define  the Porter board dependent part of the DU device node.
> >>Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
> >>bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
> >>and HDMI devices.
> >>
> >>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>
> >>---
> >>This patch is against 'renesas-devel-20151221-v4.4-rc6' tag of Simon Horman's
> >>'renesas.git' repo.
> >
> >Thanks, I have queued this up for v4.6.
> 
>    Actually, I was going to check this patch WRT the DU channels used, given
> Laurent's remark. OK, I will just send an incremental patch if needed.

Thanks and sorry for being a bit hasty.

[PATCH] ARM: shmobile: silk: add DU DT support

[Sergei Shtylyov]

Define  the SILK board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160111-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7794-silk.dts |  109 +++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -64,6 +64,61 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -164,6 +219,38 @@
 			};
 		};
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &mmcif0 {
@@ -258,3 +345,25 @@
 &usbphy {
 	status = "okay";
 };
+
+&du {
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};

[PATCH] ARM: shmobile: silk: add DU DT support

[Sergei Shtylyov]

Define  the SILK board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160111-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7794-silk.dts |  109 +++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -64,6 +64,61 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port at 1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -164,6 +219,38 @@
 			};
 		};
 	};
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &mmcif0 {
@@ -258,3 +345,25 @@
 &usbphy {
 	status = "okay";
 };
+
+&du {
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port at 0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port at 1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};

[PATCH] ARM: shmobile: silk: add DU DT support

[Sergei Shtylyov]

Define  the SILK board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160111-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7794-silk.dts |  109 +++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -64,6 +64,61 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -164,6 +219,38 @@
 			};
 		};
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &mmcif0 {
@@ -258,3 +345,25 @@
 &usbphy {
 	status = "okay";
 };
+
+&du {
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};

Re: [PATCH] ARM: shmobile: silk: add DU DT support

[Simon Horman]

On Wed, Jan 13, 2016 at 02:06:08AM +0300, Sergei Shtylyov wrote:
> Define  the SILK board dependent part of the DU device node.
> Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
> (connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
> necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
> connectors.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.6 after updating the subject with
s/shmobile/dts/ to reflect a request made from the ARM SoC maintainers
regarding prefixes for DT patches.

[PATCH] ARM: shmobile: silk: add DU DT support

[Simon Horman]

On Wed, Jan 13, 2016 at 02:06:08AM +0300, Sergei Shtylyov wrote:
> Define  the SILK board dependent part of the DU device node.
> Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
> (connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
> necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
> connectors.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.6 after updating the subject with
s/shmobile/dts/ to reflect a request made from the ARM SoC maintainers
regarding prefixes for DT patches.

Re: [PATCH] ARM: shmobile: silk: add DU DT support

[Simon Horman]

On Wed, Jan 13, 2016 at 02:06:08AM +0300, Sergei Shtylyov wrote:
> Define  the SILK board dependent part of the DU device node.
> Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
> (connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
> necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
> connectors.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, I have queued this up for v4.6 after updating the subject with
s/shmobile/dts/ to reflect a request made from the ARM SoC maintainers
regarding prefixes for DT patches.

[PATCH] ARM: dts: porter: add sound support

[Sergei Shtylyov]

Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20160121-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   71 +++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ *      3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x14_clk: x14-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -167,6 +202,16 @@
 		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif0 {
@@ -257,6 +302,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4642: codec@12 {
+		compatible = "asahi-kasei,ak4642";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -385,3 +436,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};

[PATCH] ARM: dts: porter: add sound support

[Sergei Shtylyov]

Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20160121-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   71 +++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ *      3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x14_clk: x14-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -167,6 +202,16 @@
 		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif0 {
@@ -257,6 +302,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4642: codec at 12 {
+		compatible = "asahi-kasei,ak4642";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -385,3 +436,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};

Re: [PATCH] ARM: dts: porter: add sound support

[Kuninori Morimoto]

Hi

> Define the Porter board dependent part of the R8A7791 sound device node.
> Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> +/*
> + * SSI-AK4642
> + *
> + * SW3: 1: AK4642
> + *      3: ADV7511

This is no a big deal, but according to my schematic,
porter is using JP3, not SW3, but no one cares ;P

Best regards
---
Kuninori Morimoto

[PATCH] ARM: dts: porter: add sound support

[Kuninori Morimoto]

Hi

> Define the Porter board dependent part of the R8A7791 sound device node.
> Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> +/*
> + * SSI-AK4642
> + *
> + * SW3: 1: AK4642
> + *      3: ADV7511

This is no a big deal, but according to my schematic,
porter is using JP3, not SW3, but no one cares ;P

Best regards
---
Kuninori Morimoto

Re: [PATCH] ARM: dts: porter: add sound support

[Kuninori Morimoto]

Hi

> Define the Porter board dependent part of the R8A7791 sound device node.
> Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> +/*
> + * SSI-AK4642
> + *
> + * SW3: 1: AK4642
> + *      3: ADV7511

This is no a big deal, but according to my schematic,
porter is using JP3, not SW3, but no one cares ;P

Best regards
---
Kuninori Morimoto

Re: [PATCH] ARM: dts: porter: add sound support

[Simon Horman]

On Mon, Jan 25, 2016 at 12:35:57AM +0000, Kuninori Morimoto wrote:
> 
> Hi
> 
> > Define the Porter board dependent part of the R8A7791 sound device node.
> > Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
> > Add the "simple-audio-card" device node to interconnect the SoC sound
> > device  and the codec.
> > 
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up.

> > +/*
> > + * SSI-AK4642
> > + *
> > + * SW3: 1: AK4642
> > + *      3: ADV7511
> 
> This is no a big deal, but according to my schematic,
> porter is using JP3, not SW3, but no one cares ;P

Sergei, please feel free to provide a follow-up patch to address this.

[PATCH] ARM: dts: porter: add sound support

[Simon Horman]

On Mon, Jan 25, 2016 at 12:35:57AM +0000, Kuninori Morimoto wrote:
> 
> Hi
> 
> > Define the Porter board dependent part of the R8A7791 sound device node.
> > Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
> > Add the "simple-audio-card" device node to interconnect the SoC sound
> > device  and the codec.
> > 
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up.

> > +/*
> > + * SSI-AK4642
> > + *
> > + * SW3: 1: AK4642
> > + *      3: ADV7511
> 
> This is no a big deal, but according to my schematic,
> porter is using JP3, not SW3, but no one cares ;P

Sergei, please feel free to provide a follow-up patch to address this.

Re: [PATCH] ARM: dts: porter: add sound support

[Sergei Shtylyov]

Hello.

On 01/25/2016 03:35 AM, Kuninori Morimoto wrote:

>> Define the Porter board dependent part of the R8A7791 sound device node.
>> Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
>> Add the "simple-audio-card" device node to interconnect the SoC sound
>> device  and the codec.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

    Thank you. I forgot to mention that the patch was based on your work... :-/

>> +/*
>> + * SSI-AK4642
>> + *
>> + * SW3: 1: AK4642
>> + *      3: ADV7511
>
> This is no a big deal, but according to my schematic,
> porter is using JP3, not SW3, but no one cares ;P

    Indeed, sorry about that.

> Best regards
> ---
> Kuninori Morimoto

MBR, Sergei

[PATCH] ARM: dts: porter: add sound support

[Sergei Shtylyov]

Hello.

On 01/25/2016 03:35 AM, Kuninori Morimoto wrote:

>> Define the Porter board dependent part of the R8A7791 sound device node.
>> Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
>> Add the "simple-audio-card" device node to interconnect the SoC sound
>> device  and the codec.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

    Thank you. I forgot to mention that the patch was based on your work... :-/

>> +/*
>> + * SSI-AK4642
>> + *
>> + * SW3: 1: AK4642
>> + *      3: ADV7511
>
> This is no a big deal, but according to my schematic,
> porter is using JP3, not SW3, but no one cares ;P

    Indeed, sorry about that.

> Best regards
> ---
> Kuninori Morimoto

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
can add  MAX3355 device node to  the Porter device tree and properly refer
to it from the USBHS node instead of using  "renesas,enable-gpio" property
which only allowed checking the USB ID pin  at the driver probe time;  now
this  pin's  state can be monitored dynamically!

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20160126-v4.5-rc1' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -90,6 +90,12 @@
 			  1800000 0>;
 	};
 
+	max3355: usb-otg {
+		compatible = "maxim,max3355";
+		maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -394,7 +400,7 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	extcon = <&max3355>;
 };
 
 &usbphy {

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
can add  MAX3355 device node to  the Porter device tree and properly refer
to it from the USBHS node instead of using  "renesas,enable-gpio" property
which only allowed checking the USB ID pin  at the driver probe time;  now
this  pin's  state can be monitored dynamically!

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20160126-v4.5-rc1' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -90,6 +90,12 @@
 			  1800000 0>;
 	};
 
+	max3355: usb-otg {
+		compatible = "maxim,max3355";
+		maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -394,7 +400,7 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	extcon = <&max3355>;
 };
 
 &usbphy {

RE: [PATCH] ARM: dts: porter: add MAX3355 support

[Yoshihiro Shimoda]

Hi,

> From: linux-renesas-soc-owner@vger.kernel.org [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
> Shtylyov
> Sent: Wednesday, January 27, 2016 7:14 AM
> 
> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> can add  MAX3355 device node to  the Porter device tree and properly refer
> to it from the USBHS node instead of using  "renesas,enable-gpio" property
> which only allowed checking the USB ID pin  at the driver probe time;  now
> this  pin's  state can be monitored dynamically!
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
even if I connected/disconnected a usb convert cable (usb micro-ab to A).
Remarks: I confirmed that the usb convert cable worked correctly on other board.

Do I need other settings for this?

- kernel : renesas.git / renesas-devel-20160127-v4.5-rc1 tag + this patch
- config : shmobile_defconfig + EXTCON + MAX3355 + and more
- board : Porter (Y-RCAR-M2-PORTER-A)
- log :
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.5.0-rc1-dirty (shimoda@shimoda-i7-pc) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #45 SMP Thu Jan 28 13:49:08 JST 2016
[    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Porter
[    0.000000] Ignoring memory block 0x200000000 - 0x240000000
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c07308c0, node_mem_map ef7f9000
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 12 pages/cpu @ef7c0000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1031652K/1048576K available (4928K kernel code, 184K rwdata, 1908K rodata, 308K init, 290K bss, 16924K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06b604c   (6841 kB)
[    0.000000]       .init : 0xc06b7000 - 0xc0704000   ( 308 kB)
[    0.000000]       .data : 0xc0704000 - 0xc0732100   ( 185 kB)
[    0.000000]        .bss : 0xc0735000 - 0xc077d9a4   ( 291 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 10.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[    0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[    0.000013] Switching to timer-based delay loop, resolution 100ns
[    0.000386] Console: colour dummy device 80x30
[    0.000680] console [tty0] enabled
[    0.000700] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[    0.000723] pid_max: default: 32768 minimum: 301
[    0.000830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001289] CPU: Testing write buffer coherency: ok
[    0.001474] CPU0: update cpu_capacity 1024
[    0.001489] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001564] Setting up static identity map for 0x40009000 - 0x40009058
[    0.002502] Unable to boot CPU1 when MD21 is set
[    0.002520] CPU1: failed to boot: -524
[    0.002557] Brought up 1 CPUs
[    0.002569] SMP: Total of 1 processors activated (20.00 BogoMIPS).
[    0.002581] CPU: All CPU(s) started in SVC mode.
[    0.003315] devtmpfs: initialized
[    0.010845] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.011227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.011504] pinctrl core: initialized pinctrl subsystem
[    0.012122] NET: Registered protocol family 16
[    0.012294] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.015038] renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
[    0.017503] sh-pfc e6060000.pfc: r8a77910_pfc support registered
[    0.021185] No ATAGs?
[    0.021207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.021231] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.041040] gpio-regulator regulator@1: Could not obtain regulator setting GPIOs: -517
[    0.041139] gpio-regulator regulator@3: Could not obtain regulator setting GPIOs: -517
[    0.041603] vgaarb: loaded
[    0.041834] SCSI subsystem initialized
[    0.042233] libata version 3.00 loaded.
[    0.042444] usbcore: registered new interface driver usbfs
[    0.042501] usbcore: registered new interface driver hub
[    0.042554] usbcore: registered new device driver usb
[    0.043578] Advanced Linux Sound Architecture Driver Initialized.
[    0.044815] clocksource: Switched to clocksource arch_sys_counter
[    0.058596] NET: Registered protocol family 2
[    0.059004] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.059064] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.059160] TCP: Hash tables configured (established 8192 bind 8192)
[    0.059204] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.059233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.059373] NET: Registered protocol family 1
[    0.060064] RPC: Registered named UNIX socket transport module.
[    0.060082] RPC: Registered udp transport module.
[    0.060093] RPC: Registered tcp transport module.
[    0.060104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.060127] PCI: CLS 0 bytes, default 64
[    0.061237] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062651] NFS: Registering the id_resolver key type
[    0.062692] Key type id_resolver registered
[    0.062704] Key type id_legacy registered
[    0.062729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.064362] bounce: pool size: 64 pages
[    0.064431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.064453] io scheduler noop registered
[    0.064467] io scheduler deadline registered
[    0.064487] io scheduler cfq registered (default)
[    0.065525] gpio_rcar e6050000.gpio: driving 32 GPIOs
[    0.065776] gpio_rcar e6051000.gpio: driving 26 GPIOs
[    0.066053] gpio_rcar e6052000.gpio: driving 32 GPIOs
[    0.066328] gpio_rcar e6053000.gpio: driving 32 GPIOs
[    0.066599] gpio_rcar e6054000.gpio: driving 32 GPIOs
[    0.066867] gpio_rcar e6055000.gpio: driving 32 GPIOs
[    0.067155] gpio_rcar e6055400.gpio: driving 32 GPIOs
[    0.067400] gpio_rcar e6055800.gpio: driving 26 GPIOs
[    0.067947] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[    0.068104] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[    0.068121] pci_bus 0000:00: root bus resource [io  0xee080000-0xee0810ff]
[    0.068136] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[    0.068150] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.068192] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[    0.068218] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[    0.068236] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[    0.068434] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[    0.068461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.068534] pci 0000:00:01.0: supports D1 D2
[    0.068548] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[    0.068746] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[    0.068773] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.068845] pci 0000:00:02.0: supports D1 D2
[    0.068858] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[    0.069055] PCI: bus0: Fast back to back transfers disabled
[    0.069072] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.069147] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[    0.069167] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[    0.069205] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    0.069246] pci 0000:00:02.0: enabling device (0140 -> 0142)
[    0.069423] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[    0.069564] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
[    0.069580] pci_bus 0001:01: root bus resource [io  0xee0c0000-0xee0c10ff]
[    0.069594] pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
[    0.069608] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.069640] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[    0.069663] pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[    0.069681] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[    0.069863] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[    0.069889] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.069962] pci 0001:01:01.0: supports D1 D2
[    0.069975] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[    0.070168] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[    0.070194] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.070266] pci 0001:01:02.0: supports D1 D2
[    0.070279] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[    0.070476] PCI: bus1: Fast back to back transfers disabled
[    0.070492] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.070606] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[    0.070624] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[    0.070660] pci 0001:01:01.0: enabling device (0140 -> 0142)
[    0.070697] pci 0001:01:02.0: enabling device (0140 -> 0142)
[    0.070959] PCI host bridge /pcie@fe000000 ranges:
[    0.070984]    IO 0xfe100000..0xfe1fffff -> 0x00000000
[    0.071003]   MEM 0xfe200000..0xfe3fffff -> 0xfe200000
[    0.071021]   MEM 0x30000000..0x37ffffff -> 0x30000000
[    0.071035]   MEM 0x38000000..0x3fffffff -> 0x38000000
[    0.264153] rcar-pcie fe000000.pcie: PCIe link down
[    0.278314] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.279574] SuperH (H)SCI(F) driver initialized
[    0.279919] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 105, base_baud = 0) is a scif
[    1.250320] console [ttySC0] enabled
[    1.254672] [drm] Initialized drm 1.1.0 20060810
[    1.260004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.266787] [drm] No driver support for vblank timestamp query.
[    1.273157] rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
[    1.282277] scsi host0: sata_rcar
[    1.285888] ata1: SATA max UDMA/133 irq 107
[    1.290762] renesas_spi e6b10000.spi: DMA available
[    1.296792] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[    1.301962] 3 ofpart partitions found on MTD device spi0.0
[    1.307592] Creating 3 MTD partitions on "spi0.0":
[    1.312488] 0x000000000000-0x000000040000 : "loader_prg"
[    1.318859] 0x000000040000-0x000000440000 : "user_prg"
[    1.325085] 0x000000440000-0x000004000000 : "flash_fs"
[    1.331277] renesas_spi e6b10000.spi: probed
[    1.336702] CAN device driver interface
[    1.341298] rcar_can e6e80000.can: device registered (regs @ f08ea000, IRQ115)
[    1.349212] libphy: sh_mii: probed
[    1.355593] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:89:12, IRQ 106.
[    1.365356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.372029] ehci-pci: EHCI PCI platform driver
[    1.376710] ehci-pci 0000:00:02.0: EHCI Host Controller
[    1.382064] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[    1.389744] ehci-pci 0000:00:02.0: irq 118, io mem 0xee081000
[    1.414163] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[    1.420696] hub 1-0:1.0: USB hub found
[    1.424682] hub 1-0:1.0: 1 port detected
[    1.429078] ehci-pci 0001:01:02.0: EHCI Host Controller
[    1.434476] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[    1.442122] ehci-pci 0001:01:02.0: irq 119, io mem 0xee0c1000
[    1.464210] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[    1.470671] hub 2-0:1.0: USB hub found
[    1.474641] hub 2-0:1.0: 1 port detected
[    1.478985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.485321] ohci-pci: OHCI PCI platform driver
[    1.489927] ohci-pci 0000:00:01.0: OHCI PCI host controller
[    1.495644] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
[    1.503236] ohci-pci 0000:00:01.0: irq 118, io mem 0xee080000
[    1.595067] hub 3-0:1.0: USB hub found
[    1.599015] hub 3-0:1.0: 1 port detected
[    1.603355] ohci-pci 0001:01:01.0: OHCI PCI host controller
[    1.609080] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
[    1.616682] ohci-pci 0001:01:01.0: irq 119, io mem 0xee0c0000
[    1.704949] hub 4-0:1.0: USB hub found
[    1.708894] hub 4-0:1.0: 1 port detected
[    1.714314] mousedev: PS/2 mouse device common for all mice
[    1.720365] i2c /dev entries driver
[    1.727969] i2c-rcar e6530000.i2c: probed
[    1.735107] rcar_thermal e61f0000.thermal: 1 sensor probed
[    1.741272] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[    1.746303] sh_mobile_sdhi ee100000.sd: Got WP GPIO
[    1.751548] ata1: link resume succeeded after 1 retries
[    1.864182] ata1: SATA link down (SStatus 0 SControl 300)
[    1.924411] sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
[    1.932452] sh_mobile_sdhi ee160000.sd: Got CD GPIO
[    2.114316] sh_mobile_sdhi ee160000.sd: mmc1 base at 0xee160000 clock rate 97 MHz
[    2.122647] usbcore: registered new interface driver usbhid
[    2.128363] usbhid: USB HID core driver
[    2.133902] ak4642-codec 2-0012: No cache used with register defaults set!
[    2.144969] rcar_sound ec500000.sound: probed
[    2.150032] NET: Registered protocol family 10
[    2.157203] sit: IPv6 over IPv4 tunneling driver
[    2.162417] NET: Registered protocol family 17
[    2.167011] can: controller area network core (rev 20120528 abi 9)
[    2.173362] NET: Registered protocol family 29
[    2.177933] can: raw protocol (rev 20120528)
[    2.182297] can: broadcast manager protocol (rev 20120528 t)
[    2.188095] can: netlink gateway (rev 20130117) max_hops=1
[    2.193775] Key type dns_resolver registered
[    2.198575] Registering SWP/SWPB emulation handler
[    2.205780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.212546] [drm] No driver support for vblank timestamp query.
[    2.219809] rcar-du feb00000.display: No connectors reported connected with modes
[    2.227488] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.241025] Console: switching to colour frame buffer device 128x48
[    2.253463] rcar-du feb00000.display: fb0:  frame buffer device
[    2.259597] [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
[    2.266760] renesas_usbhs e6590000.usb: transceiver found
[    2.272488] renesas_usbhs e6590000.usb: gadget probed
[    2.277780] phy phy-e6590100.usb-phy.1: phy init failed --> -16
[    2.283893] renesas_usbhs e6590000.usb: probed
[    2.288492] sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
[    2.298737] sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
[    2.305124] sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0  on device sh-pfc
[    2.314734] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[    2.322632] renesas_usbhs e6590000.usb: failed to activate default pinctrl state
[    2.331932] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[    2.341065] hctosys: unable to open rtc device (rtc0)
[    2.425932] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=367)
[    2.439009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.358471] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    5.367618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.384155] Sending DHCP requests ., OK
[    5.457444] IP-Config: Got DHCP answer from 192.168.44.74, my address is 192.168.44.192
[    5.468607] IP-Config: Complete:
[    5.474789]      device=eth0, hwaddr=2e:09:0a:00:89:12, ipaddr=192.168.44.192, mask=255.255.255.0, gw=192.168.44.74
[    5.488457]      host=192.168.44.192, domain=shimoda-i7.org, nis-domain=(none)
[    5.498836]      bootserver=192.168.44.74, rootserver=192.168.44.74, rootpath=/var/lib/tftpboot/arm_linux/rootfs/debian/armel-wheezy     nameserver0=192.168.44.74
[    5.519858] SDHI0 VccQ: disabling
[    5.526303] SDHI2 VccQ: disabling
[    5.532911] ALSA device list:
[    5.538917]   #0: rsnd-dai.0-ak4642-hifi
[    5.549703] VFS: Mounted root (nfs filesystem) on device 0:13.
[    5.558922] devtmpfs: mounted
[    5.565079] Freeing unused kernel memory: 308K (c06b7000 - c0704000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[    6.398307] udevd[864]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[    7.434946] random: nonblocking pool is initialized
[ ok ] Activating swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
[....] Setting up ALSA...warning: 'alsactl restore' failed with error message 'Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
alsactl: set_control:1328: failed to obtain info for control #4 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #5 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #6 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #7 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #8 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #9 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #10 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #11 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #12 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #13 (No such file o[ ok ectory)'...done.
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.

Debian GNU/Linux 7 192.168.44.192 ttySC0

192 login: root
Password:
Last login: Thu Jan  1 00:00:17 UTC 1970 on ttySC0
Linux 192.168.44.192 4.5.0-rc1-dirty #45 SMP Thu Jan 28 13:49:08 JST 2016 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@192:~#
root@192:~# cat /proc/interrupts | grep usb
108:          0     GIC-0 139 Level     e6590000.usb
118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
308:          0  e6055000.gpio  31 Edge      usb-otg
root@192:~#
root@192:~# cat /proc/interrupts | grep usb
108:          0     GIC-0 139 Level     e6590000.usb
118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
308:          0  e6055000.gpio  31 Edge      usb-otg
root@192:~#
root@192:~# cd /sys/class/extcon/extcon0
root@192:/sys/class/extcon/extcon0# cat state
USB=1
USB-HOST=0

Best regards,
Yoshihiro Shimoda

[PATCH] ARM: dts: porter: add MAX3355 support

[Yoshihiro Shimoda]

Hi,

> From: linux-renesas-soc-owner at vger.kernel.org [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
> Shtylyov
> Sent: Wednesday, January 27, 2016 7:14 AM
> 
> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> can add  MAX3355 device node to  the Porter device tree and properly refer
> to it from the USBHS node instead of using  "renesas,enable-gpio" property
> which only allowed checking the USB ID pin  at the driver probe time;  now
> this  pin's  state can be monitored dynamically!
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
even if I connected/disconnected a usb convert cable (usb micro-ab to A).
Remarks: I confirmed that the usb convert cable worked correctly on other board.

Do I need other settings for this?

- kernel : renesas.git / renesas-devel-20160127-v4.5-rc1 tag + this patch
- config : shmobile_defconfig + EXTCON + MAX3355 + and more
- board : Porter (Y-RCAR-M2-PORTER-A)
- log :
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.5.0-rc1-dirty (shimoda at shimoda-i7-pc) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #45 SMP Thu Jan 28 13:49:08 JST 2016
[    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Porter
[    0.000000] Ignoring memory block 0x200000000 - 0x240000000
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c07308c0, node_mem_map ef7f9000
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 12 pages/cpu @ef7c0000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1031652K/1048576K available (4928K kernel code, 184K rwdata, 1908K rodata, 308K init, 290K bss, 16924K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06b604c   (6841 kB)
[    0.000000]       .init : 0xc06b7000 - 0xc0704000   ( 308 kB)
[    0.000000]       .data : 0xc0704000 - 0xc0732100   ( 185 kB)
[    0.000000]        .bss : 0xc0735000 - 0xc077d9a4   ( 291 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 10.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[    0.000004] sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns
[    0.000013] Switching to timer-based delay loop, resolution 100ns
[    0.000386] Console: colour dummy device 80x30
[    0.000680] console [tty0] enabled
[    0.000700] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
[    0.000723] pid_max: default: 32768 minimum: 301
[    0.000830] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001289] CPU: Testing write buffer coherency: ok
[    0.001474] CPU0: update cpu_capacity 1024
[    0.001489] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001564] Setting up static identity map for 0x40009000 - 0x40009058
[    0.002502] Unable to boot CPU1 when MD21 is set
[    0.002520] CPU1: failed to boot: -524
[    0.002557] Brought up 1 CPUs
[    0.002569] SMP: Total of 1 processors activated (20.00 BogoMIPS).
[    0.002581] CPU: All CPU(s) started in SVC mode.
[    0.003315] devtmpfs: initialized
[    0.010845] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.011227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.011504] pinctrl core: initialized pinctrl subsystem
[    0.012122] NET: Registered protocol family 16
[    0.012294] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.015038] renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
[    0.017503] sh-pfc e6060000.pfc: r8a77910_pfc support registered
[    0.021185] No ATAGs?
[    0.021207] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.021231] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.041040] gpio-regulator regulator at 1: Could not obtain regulator setting GPIOs: -517
[    0.041139] gpio-regulator regulator at 3: Could not obtain regulator setting GPIOs: -517
[    0.041603] vgaarb: loaded
[    0.041834] SCSI subsystem initialized
[    0.042233] libata version 3.00 loaded.
[    0.042444] usbcore: registered new interface driver usbfs
[    0.042501] usbcore: registered new interface driver hub
[    0.042554] usbcore: registered new device driver usb
[    0.043578] Advanced Linux Sound Architecture Driver Initialized.
[    0.044815] clocksource: Switched to clocksource arch_sys_counter
[    0.058596] NET: Registered protocol family 2
[    0.059004] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.059064] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.059160] TCP: Hash tables configured (established 8192 bind 8192)
[    0.059204] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.059233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.059373] NET: Registered protocol family 1
[    0.060064] RPC: Registered named UNIX socket transport module.
[    0.060082] RPC: Registered udp transport module.
[    0.060093] RPC: Registered tcp transport module.
[    0.060104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.060127] PCI: CLS 0 bytes, default 64
[    0.061237] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062651] NFS: Registering the id_resolver key type
[    0.062692] Key type id_resolver registered
[    0.062704] Key type id_legacy registered
[    0.062729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.064362] bounce: pool size: 64 pages
[    0.064431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.064453] io scheduler noop registered
[    0.064467] io scheduler deadline registered
[    0.064487] io scheduler cfq registered (default)
[    0.065525] gpio_rcar e6050000.gpio: driving 32 GPIOs
[    0.065776] gpio_rcar e6051000.gpio: driving 26 GPIOs
[    0.066053] gpio_rcar e6052000.gpio: driving 32 GPIOs
[    0.066328] gpio_rcar e6053000.gpio: driving 32 GPIOs
[    0.066599] gpio_rcar e6054000.gpio: driving 32 GPIOs
[    0.066867] gpio_rcar e6055000.gpio: driving 32 GPIOs
[    0.067155] gpio_rcar e6055400.gpio: driving 32 GPIOs
[    0.067400] gpio_rcar e6055800.gpio: driving 26 GPIOs
[    0.067947] pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11
[    0.068104] pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
[    0.068121] pci_bus 0000:00: root bus resource [io  0xee080000-0xee0810ff]
[    0.068136] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff]
[    0.068150] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.068192] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000
[    0.068218] pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff]
[    0.068236] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[    0.068434] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310
[    0.068461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.068534] pci 0000:00:01.0: supports D1 D2
[    0.068548] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[    0.068746] pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320
[    0.068773] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.068845] pci 0000:00:02.0: supports D1 D2
[    0.068858] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[    0.069055] PCI: bus0: Fast back to back transfers disabled
[    0.069072] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.069147] pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
[    0.069167] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
[    0.069205] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    0.069246] pci 0000:00:02.0: enabling device (0140 -> 0142)
[    0.069423] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11
[    0.069564] pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01
[    0.069580] pci_bus 0001:01: root bus resource [io  0xee0c0000-0xee0c10ff]
[    0.069594] pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0c10ff]
[    0.069608] pci_bus 0001:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.069640] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000
[    0.069663] pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff]
[    0.069681] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref]
[    0.069863] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310
[    0.069889] pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.069962] pci 0001:01:01.0: supports D1 D2
[    0.069975] pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot
[    0.070168] pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320
[    0.070194] pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.070266] pci 0001:01:02.0: supports D1 D2
[    0.070279] pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot
[    0.070476] PCI: bus1: Fast back to back transfers disabled
[    0.070492] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.070606] pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
[    0.070624] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
[    0.070660] pci 0001:01:01.0: enabling device (0140 -> 0142)
[    0.070697] pci 0001:01:02.0: enabling device (0140 -> 0142)
[    0.070959] PCI host bridge /pcie at fe000000 ranges:
[    0.070984]    IO 0xfe100000..0xfe1fffff -> 0x00000000
[    0.071003]   MEM 0xfe200000..0xfe3fffff -> 0xfe200000
[    0.071021]   MEM 0x30000000..0x37ffffff -> 0x30000000
[    0.071035]   MEM 0x38000000..0x3fffffff -> 0x38000000
[    0.264153] rcar-pcie fe000000.pcie: PCIe link down
[    0.278314] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.279574] SuperH (H)SCI(F) driver initialized
[    0.279919] e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 105, base_baud = 0) is a scif
[    1.250320] console [ttySC0] enabled
[    1.254672] [drm] Initialized drm 1.1.0 20060810
[    1.260004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.266787] [drm] No driver support for vblank timestamp query.
[    1.273157] rcar-du feb00000.display: failed to initialize DRM/KMS (-517)
[    1.282277] scsi host0: sata_rcar
[    1.285888] ata1: SATA max UDMA/133 irq 107
[    1.290762] renesas_spi e6b10000.spi: DMA available
[    1.296792] m25p80 spi0.0: s25fl512s (65536 Kbytes)
[    1.301962] 3 ofpart partitions found on MTD device spi0.0
[    1.307592] Creating 3 MTD partitions on "spi0.0":
[    1.312488] 0x000000000000-0x000000040000 : "loader_prg"
[    1.318859] 0x000000040000-0x000000440000 : "user_prg"
[    1.325085] 0x000000440000-0x000004000000 : "flash_fs"
[    1.331277] renesas_spi e6b10000.spi: probed
[    1.336702] CAN device driver interface
[    1.341298] rcar_can e6e80000.can: device registered (regs @ f08ea000, IRQ115)
[    1.349212] libphy: sh_mii: probed
[    1.355593] sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:89:12, IRQ 106.
[    1.365356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.372029] ehci-pci: EHCI PCI platform driver
[    1.376710] ehci-pci 0000:00:02.0: EHCI Host Controller
[    1.382064] ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[    1.389744] ehci-pci 0000:00:02.0: irq 118, io mem 0xee081000
[    1.414163] ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
[    1.420696] hub 1-0:1.0: USB hub found
[    1.424682] hub 1-0:1.0: 1 port detected
[    1.429078] ehci-pci 0001:01:02.0: EHCI Host Controller
[    1.434476] ehci-pci 0001:01:02.0: new USB bus registered, assigned bus number 2
[    1.442122] ehci-pci 0001:01:02.0: irq 119, io mem 0xee0c1000
[    1.464210] ehci-pci 0001:01:02.0: USB 2.0 started, EHCI 1.00
[    1.470671] hub 2-0:1.0: USB hub found
[    1.474641] hub 2-0:1.0: 1 port detected
[    1.478985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.485321] ohci-pci: OHCI PCI platform driver
[    1.489927] ohci-pci 0000:00:01.0: OHCI PCI host controller
[    1.495644] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3
[    1.503236] ohci-pci 0000:00:01.0: irq 118, io mem 0xee080000
[    1.595067] hub 3-0:1.0: USB hub found
[    1.599015] hub 3-0:1.0: 1 port detected
[    1.603355] ohci-pci 0001:01:01.0: OHCI PCI host controller
[    1.609080] ohci-pci 0001:01:01.0: new USB bus registered, assigned bus number 4
[    1.616682] ohci-pci 0001:01:01.0: irq 119, io mem 0xee0c0000
[    1.704949] hub 4-0:1.0: USB hub found
[    1.708894] hub 4-0:1.0: 1 port detected
[    1.714314] mousedev: PS/2 mouse device common for all mice
[    1.720365] i2c /dev entries driver
[    1.727969] i2c-rcar e6530000.i2c: probed
[    1.735107] rcar_thermal e61f0000.thermal: 1 sensor probed
[    1.741272] sh_mobile_sdhi ee100000.sd: Got CD GPIO
[    1.746303] sh_mobile_sdhi ee100000.sd: Got WP GPIO
[    1.751548] ata1: link resume succeeded after 1 retries
[    1.864182] ata1: SATA link down (SStatus 0 SControl 300)
[    1.924411] sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 clock rate 97 MHz
[    1.932452] sh_mobile_sdhi ee160000.sd: Got CD GPIO
[    2.114316] sh_mobile_sdhi ee160000.sd: mmc1 base at 0xee160000 clock rate 97 MHz
[    2.122647] usbcore: registered new interface driver usbhid
[    2.128363] usbhid: USB HID core driver
[    2.133902] ak4642-codec 2-0012: No cache used with register defaults set!
[    2.144969] rcar_sound ec500000.sound: probed
[    2.150032] NET: Registered protocol family 10
[    2.157203] sit: IPv6 over IPv4 tunneling driver
[    2.162417] NET: Registered protocol family 17
[    2.167011] can: controller area network core (rev 20120528 abi 9)
[    2.173362] NET: Registered protocol family 29
[    2.177933] can: raw protocol (rev 20120528)
[    2.182297] can: broadcast manager protocol (rev 20120528 t)
[    2.188095] can: netlink gateway (rev 20130117) max_hops=1
[    2.193775] Key type dns_resolver registered
[    2.198575] Registering SWP/SWPB emulation handler
[    2.205780] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.212546] [drm] No driver support for vblank timestamp query.
[    2.219809] rcar-du feb00000.display: No connectors reported connected with modes
[    2.227488] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.241025] Console: switching to colour frame buffer device 128x48
[    2.253463] rcar-du feb00000.display: fb0:  frame buffer device
[    2.259597] [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
[    2.266760] renesas_usbhs e6590000.usb: transceiver found
[    2.272488] renesas_usbhs e6590000.usb: gadget probed
[    2.277780] phy phy-e6590100.usb-phy.1: phy init failed --> -16
[    2.283893] renesas_usbhs e6590000.usb: probed
[    2.288492] sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb
[    2.298737] sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22
[    2.305124] sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0  on device sh-pfc
[    2.314734] renesas_usbhs e6590000.usb: Error applying setting, reverse things back
[    2.322632] renesas_usbhs e6590000.usb: failed to activate default pinctrl state
[    2.331932] asoc-simple-card sound: ak4642-hifi <-> ec500000.sound mapping ok
[    2.341065] hctosys: unable to open rtc device (rtc0)
[    2.425932] Micrel KSZ8041RNLI ee700000.etherne:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.etherne:01, irq=367)
[    2.439009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.358471] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    5.367618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.384155] Sending DHCP requests ., OK
[    5.457444] IP-Config: Got DHCP answer from 192.168.44.74, my address is 192.168.44.192
[    5.468607] IP-Config: Complete:
[    5.474789]      device=eth0, hwaddr=2e:09:0a:00:89:12, ipaddr=192.168.44.192, mask=255.255.255.0, gw=192.168.44.74
[    5.488457]      host=192.168.44.192, domain=shimoda-i7.org, nis-domain=(none)
[    5.498836]      bootserver=192.168.44.74, rootserver=192.168.44.74, rootpath=/var/lib/tftpboot/arm_linux/rootfs/debian/armel-wheezy     nameserver0=192.168.44.74
[    5.519858] SDHI0 VccQ: disabling
[    5.526303] SDHI2 VccQ: disabling
[    5.532911] ALSA device list:
[    5.538917]   #0: rsnd-dai.0-ak4642-hifi
[    5.549703] VFS: Mounted root (nfs filesystem) on device 0:13.
[    5.558922] devtmpfs: mounted
[    5.565079] Freeing unused kernel memory: 308K (c06b7000 - c0704000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[    6.398307] udevd[864]: starting version 175
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[    7.434946] random: nonblocking pool is initialized
[ ok ] Activating swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
[....] Setting up ALSA...warning: 'alsactl restore' failed with error message 'Found hardware: "rsnd-dai_0-ak46" "" "" "" ""
Hardware is initialized using a generic method
alsactl: set_control:1328: failed to obtain info for control #4 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #5 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #6 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #7 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #8 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #9 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #10 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #11 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #12 (No such file or directory)
alsactl: set_control:1328: failed to obtain info for control #13 (No such file o[ ok ectory)'...done.
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.

Debian GNU/Linux 7 192.168.44.192 ttySC0

192 login: root
Password:
Last login: Thu Jan  1 00:00:17 UTC 1970 on ttySC0
Linux 192.168.44.192 4.5.0-rc1-dirty #45 SMP Thu Jan 28 13:49:08 JST 2016 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root at 192:~#
root at 192:~# cat /proc/interrupts | grep usb
108:          0     GIC-0 139 Level     e6590000.usb
118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
308:          0  e6055000.gpio  31 Edge      usb-otg
root at 192:~#
root at 192:~# cat /proc/interrupts | grep usb
108:          0     GIC-0 139 Level     e6590000.usb
118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
308:          0  e6055000.gpio  31 Edge      usb-otg
root at 192:~#
root at 192:~# cd /sys/class/extcon/extcon0
root at 192:/sys/class/extcon/extcon0# cat state
USB=1
USB-HOST=0

Best regards,
Yoshihiro Shimoda

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Hello.

On 01/28/2016 08:49 AM, Yoshihiro Shimoda wrote:

>> From: linux-renesas-soc-owner@vger.kernel.org [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
>> Shtylyov
>> Sent: Wednesday, January 27, 2016 7:14 AM
>>
>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>> can add  MAX3355 device node to  the Porter device tree and properly refer
>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>> which only allowed checking the USB ID pin  at the driver probe time;  now
>> this  pin's  state can be monitored dynamically!
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> Remarks: I confirmed that the usb convert cable worked correctly on other board.

    I guess I have the same cable and IRQs do happen for me when I connect and 
disconnect it (as it should be).

> Do I need other settings for this?

    No evident answer to that, your logs show that MAX3355 driver was enabled...

> root@192:~# cat /proc/interrupts | grep usb
> 108:          0     GIC-0 139 Level     e6590000.usb
> 118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
> 119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
> 308:          0  e6055000.gpio  31 Edge      usb-otg
> root@192:~#
> root@192:~# cat /proc/interrupts | grep usb
> 108:          0     GIC-0 139 Level     e6590000.usb
> 118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
> 119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
> 308:          0  e6055000.gpio  31 Edge      usb-otg
> root@192:~#
> root@192:~# cd /sys/class/extcon/extcon0
> root@192:/sys/class/extcon/extcon0# cat state
> USB=1
> USB-HOST=0

    I guess these states doesn't change even if you insert your cable?
They also do change for me.

> Best regards,
> Yoshihiro Shimoda

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Hello.

On 01/28/2016 08:49 AM, Yoshihiro Shimoda wrote:

>> From: linux-renesas-soc-owner at vger.kernel.org [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
>> Shtylyov
>> Sent: Wednesday, January 27, 2016 7:14 AM
>>
>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>> can add  MAX3355 device node to  the Porter device tree and properly refer
>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>> which only allowed checking the USB ID pin  at the driver probe time;  now
>> this  pin's  state can be monitored dynamically!
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> Remarks: I confirmed that the usb convert cable worked correctly on other board.

    I guess I have the same cable and IRQs do happen for me when I connect and 
disconnect it (as it should be).

> Do I need other settings for this?

    No evident answer to that, your logs show that MAX3355 driver was enabled...

> root at 192:~# cat /proc/interrupts | grep usb
> 108:          0     GIC-0 139 Level     e6590000.usb
> 118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
> 119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
> 308:          0  e6055000.gpio  31 Edge      usb-otg
> root at 192:~#
> root at 192:~# cat /proc/interrupts | grep usb
> 108:          0     GIC-0 139 Level     e6590000.usb
> 118:          1     GIC-0 140 Level     ehci_hcd:usb1, ohci_hcd:usb3
> 119:          0     GIC-0 145 Level     ehci_hcd:usb2, ohci_hcd:usb4
> 308:          0  e6055000.gpio  31 Edge      usb-otg
> root at 192:~#
> root at 192:~# cd /sys/class/extcon/extcon0
> root at 192:/sys/class/extcon/extcon0# cat state
> USB=1
> USB-HOST=0

    I guess these states doesn't change even if you insert your cable?
They also do change for me.

> Best regards,
> Yoshihiro Shimoda

MBR, Sergei

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 01/29/2016 11:28 PM, Sergei Shtylyov wrote:

>>> From: linux-renesas-soc-owner@vger.kernel.org
>>> [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
>>> Shtylyov
>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>
>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>> this  pin's  state can be monitored dynamically!
>>>
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>> Remarks: I confirmed that the usb convert cable worked correctly on other
>> board.
>
>     I guess I have the same cable

    No, I have mini-AB connector here and hence my cable is mini-AB to A.

> and IRQs do happen for me when I connect and
> disconnect it (as it should be).

>> Best regards,
>> Yoshihiro Shimoda

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 01/29/2016 11:28 PM, Sergei Shtylyov wrote:

>>> From: linux-renesas-soc-owner at vger.kernel.org
>>> [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
>>> Shtylyov
>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>
>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>> this  pin's  state can be monitored dynamically!
>>>
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>> Remarks: I confirmed that the usb convert cable worked correctly on other
>> board.
>
>     I guess I have the same cable

    No, I have mini-AB connector here and hence my cable is mini-AB to A.

> and IRQs do happen for me when I connect and
> disconnect it (as it should be).

>> Best regards,
>> Yoshihiro Shimoda

MBR, Sergei

RE: [PATCH] ARM: dts: porter: add MAX3355 support

[Yoshihiro Shimoda]

Hi,

> From: Sergei Shtylyov
> Sent: Saturday, January 30, 2016 5:50 AM
> 
> On 01/29/2016 11:28 PM, Sergei Shtylyov wrote:
> 
> >>> From: linux-renesas-soc-owner@vger.kernel.org
> >>> [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
> >>> Shtylyov
> >>> Sent: Wednesday, January 27, 2016 7:14 AM
> >>>
> >>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> >>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> >>> can add  MAX3355 device node to  the Porter device tree and properly refer
> >>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
> >>> which only allowed checking the USB ID pin  at the driver probe time;  now
> >>> this  pin's  state can be monitored dynamically!
> >>>
> >>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>
> >> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> >> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> >> Remarks: I confirmed that the usb convert cable worked correctly on other
> >> board.
> >
> >     I guess I have the same cable
> 
>     No, I have mini-AB connector here and hence my cable is mini-AB to A.

I checked Porter specification and then I found 2 specifications exist...
 Porter "B" : mini AB connecter and Max3355 is on the board.
 Porter "C" : micro AB connect and Max3355 is not on the board. (Select host/peripheral by a jumper.)

I guess that your current target is "B".
If so, I think this patch is acceptable.

Best regards,
Yoshihiro Shimoda

> > and IRQs do happen for me when I connect and
> > disconnect it (as it should be).
> 
> >> Best regards,
> >> Yoshihiro Shimoda
> 
> MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Yoshihiro Shimoda]

Hi,

> From: Sergei Shtylyov
> Sent: Saturday, January 30, 2016 5:50 AM
> 
> On 01/29/2016 11:28 PM, Sergei Shtylyov wrote:
> 
> >>> From: linux-renesas-soc-owner at vger.kernel.org
> >>> [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
> >>> Shtylyov
> >>> Sent: Wednesday, January 27, 2016 7:14 AM
> >>>
> >>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> >>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> >>> can add  MAX3355 device node to  the Porter device tree and properly refer
> >>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
> >>> which only allowed checking the USB ID pin  at the driver probe time;  now
> >>> this  pin's  state can be monitored dynamically!
> >>>
> >>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>
> >> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> >> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> >> Remarks: I confirmed that the usb convert cable worked correctly on other
> >> board.
> >
> >     I guess I have the same cable
> 
>     No, I have mini-AB connector here and hence my cable is mini-AB to A.

I checked Porter specification and then I found 2 specifications exist...
 Porter "B" : mini AB connecter and Max3355 is on the board.
 Porter "C" : micro AB connect and Max3355 is not on the board. (Select host/peripheral by a jumper.)

I guess that your current target is "B".
If so, I think this patch is acceptable.

Best regards,
Yoshihiro Shimoda

> > and IRQs do happen for me when I connect and
> > disconnect it (as it should be).
> 
> >> Best regards,
> >> Yoshihiro Shimoda
> 
> MBR, Sergei

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Hello.

On 02/01/2016 02:17 PM, Yoshihiro Shimoda wrote:

>>>>> From: linux-renesas-soc-owner@vger.kernel.org
>>>>> [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
>>>>> Shtylyov
>>>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>>>
>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>> this  pin's  state can be monitored dynamically!
>>>>>
>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>
>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>> board.
>>>
>>>      I guess I have the same cable
>>
>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>
> I checked Porter specification and then I found 2 specifications exist...

    I've looked thru my schematics files and found 3: Rev. 1.1 Update Version 
2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
I'm not sure which of the last 2 should be considered final...

>   Porter "B" : mini AB connecter and Max3355 is on the board.
>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select host/peripheral by a jumper.)

    Yeah, seeing JP13 in the PORTER_C schematics.

> I guess that your current target is "B".

    If not earlier. It actually has "Henninger B REV2" printed on it and 
"Porter PCB 1 R3" on a pasted sticker.

> If so, I think this patch is acceptable.

    I'm not so sure now...

> Best regards,
> Yoshihiro Shimoda

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

Hello.

On 02/01/2016 02:17 PM, Yoshihiro Shimoda wrote:

>>>>> From: linux-renesas-soc-owner at vger.kernel.org
>>>>> [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
>>>>> Shtylyov
>>>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>>>
>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>> this  pin's  state can be monitored dynamically!
>>>>>
>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>
>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>> board.
>>>
>>>      I guess I have the same cable
>>
>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>
> I checked Porter specification and then I found 2 specifications exist...

    I've looked thru my schematics files and found 3: Rev. 1.1 Update Version 
2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
I'm not sure which of the last 2 should be considered final...

>   Porter "B" : mini AB connecter and Max3355 is on the board.
>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select host/peripheral by a jumper.)

    Yeah, seeing JP13 in the PORTER_C schematics.

> I guess that your current target is "B".

    If not earlier. It actually has "Henninger B REV2" printed on it and 
"Porter PCB 1 R3" on a pasted sticker.

> If so, I think this patch is acceptable.

    I'm not so sure now...

> Best regards,
> Yoshihiro Shimoda

MBR, Sergei

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 02/01/2016 08:54 PM, Sergei Shtylyov wrote:

>>>>>> From: linux-renesas-soc-owner@vger.kernel.org
>>>>>> [mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
>>>>>> Shtylyov
>>>>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>>>>
>>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>>> this  pin's  state can be monitored dynamically!
>>>>>>
>>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>>
>>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>>> board.
>>>>
>>>>      I guess I have the same cable
>>>
>>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>>
>> I checked Porter specification and then I found 2 specifications exist...
>
>     I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
> 2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
> I'm not sure which of the last 2 should be considered final...

    Now I've found 5 versions of the Porter schematics... :-)

>>   Porter "B" : mini AB connecter and Max3355 is on the board.
>>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select
>> host/peripheral by a jumper.)
>
>     Yeah, seeing JP13 in the PORTER_C schematics.
>
>> I guess that your current target is "B".
>
>     If not earlier. It actually has "Henninger B REV2" printed on it and
> "Porter PCB 1 R3" on a pasted sticker.
>
>> If so, I think this patch is acceptable.
>
>     I'm not so sure now...

    My boss told me PORTER_C is a final version, so this patch isn't needed. 
But then another patch is needed instead: to remove "renesas,enable-gpio" prop 
from the HS-USB device node...

>> Best regards,
>> Yoshihiro Shimoda

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 02/01/2016 08:54 PM, Sergei Shtylyov wrote:

>>>>>> From: linux-renesas-soc-owner at vger.kernel.org
>>>>>> [mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
>>>>>> Shtylyov
>>>>>> Sent: Wednesday, January 27, 2016 7:14 AM
>>>>>>
>>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>>> this  pin's  state can be monitored dynamically!
>>>>>>
>>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>>
>>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>>> board.
>>>>
>>>>      I guess I have the same cable
>>>
>>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>>
>> I checked Porter specification and then I found 2 specifications exist...
>
>     I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
> 2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
> I'm not sure which of the last 2 should be considered final...

    Now I've found 5 versions of the Porter schematics... :-)

>>   Porter "B" : mini AB connecter and Max3355 is on the board.
>>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select
>> host/peripheral by a jumper.)
>
>     Yeah, seeing JP13 in the PORTER_C schematics.
>
>> I guess that your current target is "B".
>
>     If not earlier. It actually has "Henninger B REV2" printed on it and
> "Porter PCB 1 R3" on a pasted sticker.
>
>> If so, I think this patch is acceptable.
>
>     I'm not so sure now...

    My boss told me PORTER_C is a final version, so this patch isn't needed. 
But then another patch is needed instead: to remove "renesas,enable-gpio" prop 
from the HS-USB device node...

>> Best regards,
>> Yoshihiro Shimoda

MBR, Sergei

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Simon Horman]

On Mon, Feb 01, 2016 at 10:00:55PM +0300, Sergei Shtylyov wrote:
> On 02/01/2016 08:54 PM, Sergei Shtylyov wrote:
> 
> >>>>>>From: linux-renesas-soc-owner@vger.kernel.org
> >>>>>>[mailto:linux-renesas-soc-owner@vger.kernel.org] On Behalf Of Sergei
> >>>>>>Shtylyov
> >>>>>>Sent: Wednesday, January 27, 2016 7:14 AM
> >>>>>>
> >>>>>>Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> >>>>>>are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> >>>>>>can add  MAX3355 device node to  the Porter device tree and properly refer
> >>>>>>to it from the USBHS node instead of using  "renesas,enable-gpio" property
> >>>>>>which only allowed checking the USB ID pin  at the driver probe time;  now
> >>>>>>this  pin's  state can be monitored dynamically!
> >>>>>>
> >>>>>>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>>>>
> >>>>>I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> >>>>>even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> >>>>>Remarks: I confirmed that the usb convert cable worked correctly on other
> >>>>>board.
> >>>>
> >>>>     I guess I have the same cable
> >>>
> >>>     No, I have mini-AB connector here and hence my cable is mini-AB to A.
> >>
> >>I checked Porter specification and then I found 2 specifications exist...
> >
> >    I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
> >2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
> >I'm not sure which of the last 2 should be considered final...
> 
>    Now I've found 5 versions of the Porter schematics... :-)
> 
> >>  Porter "B" : mini AB connecter and Max3355 is on the board.
> >>  Porter "C" : micro AB connect and Max3355 is not on the board. (Select
> >>host/peripheral by a jumper.)
> >
> >    Yeah, seeing JP13 in the PORTER_C schematics.
> >
> >>I guess that your current target is "B".
> >
> >    If not earlier. It actually has "Henninger B REV2" printed on it and
> >"Porter PCB 1 R3" on a pasted sticker.
> >
> >>If so, I think this patch is acceptable.
> >
> >    I'm not so sure now...
> 
>    My boss told me PORTER_C is a final version, so this patch isn't needed.
> But then another patch is needed instead: to remove "renesas,enable-gpio"
> prop from the HS-USB device node...

I am marking this patch as "Rejected" in patchwork.
If changes are required in this area please either
resubmit this patch or post a different one.

Thanks.

[PATCH] ARM: dts: porter: add MAX3355 support

[Simon Horman]

On Mon, Feb 01, 2016 at 10:00:55PM +0300, Sergei Shtylyov wrote:
> On 02/01/2016 08:54 PM, Sergei Shtylyov wrote:
> 
> >>>>>>From: linux-renesas-soc-owner at vger.kernel.org
> >>>>>>[mailto:linux-renesas-soc-owner at vger.kernel.org] On Behalf Of Sergei
> >>>>>>Shtylyov
> >>>>>>Sent: Wednesday, January 27, 2016 7:14 AM
> >>>>>>
> >>>>>>Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
> >>>>>>are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
> >>>>>>can add  MAX3355 device node to  the Porter device tree and properly refer
> >>>>>>to it from the USBHS node instead of using  "renesas,enable-gpio" property
> >>>>>>which only allowed checking the USB ID pin  at the driver probe time;  now
> >>>>>>this  pin's  state can be monitored dynamically!
> >>>>>>
> >>>>>>Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >>>>>
> >>>>>I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
> >>>>>even if I connected/disconnected a usb convert cable (usb micro-ab to A).
> >>>>>Remarks: I confirmed that the usb convert cable worked correctly on other
> >>>>>board.
> >>>>
> >>>>     I guess I have the same cable
> >>>
> >>>     No, I have mini-AB connector here and hence my cable is mini-AB to A.
> >>
> >>I checked Porter specification and then I found 2 specifications exist...
> >
> >    I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
> >2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
> >I'm not sure which of the last 2 should be considered final...
> 
>    Now I've found 5 versions of the Porter schematics... :-)
> 
> >>  Porter "B" : mini AB connecter and Max3355 is on the board.
> >>  Porter "C" : micro AB connect and Max3355 is not on the board. (Select
> >>host/peripheral by a jumper.)
> >
> >    Yeah, seeing JP13 in the PORTER_C schematics.
> >
> >>I guess that your current target is "B".
> >
> >    If not earlier. It actually has "Henninger B REV2" printed on it and
> >"Porter PCB 1 R3" on a pasted sticker.
> >
> >>If so, I think this patch is acceptable.
> >
> >    I'm not so sure now...
> 
>    My boss told me PORTER_C is a final version, so this patch isn't needed.
> But then another patch is needed instead: to remove "renesas,enable-gpio"
> prop from the HS-USB device node...

I am marking this patch as "Rejected" in patchwork.
If changes are required in this area please either
resubmit this patch or post a different one.

Thanks.

Re: [PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 2/15/2016 4:45 AM, Simon Horman wrote:

>>>>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>>>>> this  pin's  state can be monitored dynamically!
>>>>>>>>
>>>>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>>>>
>>>>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>>>>> board.
>>>>>>
>>>>>>      I guess I have the same cable
>>>>>
>>>>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>>>>
>>>> I checked Porter specification and then I found 2 specifications exist...
>>>
>>>     I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
>>> 2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
>>> I'm not sure which of the last 2 should be considered final...
>>
>>     Now I've found 5 versions of the Porter schematics... :-)
>>
>>>>   Porter "B" : mini AB connecter and Max3355 is on the board.
>>>>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select
>>>> host/peripheral by a jumper.)
>>>
>>>     Yeah, seeing JP13 in the PORTER_C schematics.
>>>
>>>> I guess that your current target is "B".
>>>
>>>     If not earlier. It actually has "Henninger B REV2" printed on it and
>>> "Porter PCB 1 R3" on a pasted sticker.
>>>
>>>> If so, I think this patch is acceptable.
>>>
>>>     I'm not so sure now...
>>
>>     My boss told me PORTER_C is a final version, so this patch isn't needed.
>> But then another patch is needed instead: to remove "renesas,enable-gpio"
>> prop from the HS-USB device node...
>
> I am marking this patch as "Rejected" in patchwork.
> If changes are required in this area please either
> resubmit this patch or post a different one.

    Posted a different one on Saturday.

> Thanks.

MBR, Sergei

[PATCH] ARM: dts: porter: add MAX3355 support

[Sergei Shtylyov]

On 2/15/2016 4:45 AM, Simon Horman wrote:

>>>>>>>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings
>>>>>>>> are upstream along with the 'extcon' hook  in the Renesas USBHS driver, we
>>>>>>>> can add  MAX3355 device node to  the Porter device tree and properly refer
>>>>>>>> to it from the USBHS node instead of using  "renesas,enable-gpio" property
>>>>>>>> which only allowed checking the USB ID pin  at the driver probe time;  now
>>>>>>>> this  pin's  state can be monitored dynamically!
>>>>>>>>
>>>>>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>>>>>>
>>>>>>> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened
>>>>>>> even if I connected/disconnected a usb convert cable (usb micro-ab to A).
>>>>>>> Remarks: I confirmed that the usb convert cable worked correctly on other
>>>>>>> board.
>>>>>>
>>>>>>      I guess I have the same cable
>>>>>
>>>>>      No, I have mini-AB connector here and hence my cable is mini-AB to A.
>>>>
>>>> I checked Porter specification and then I found 2 specifications exist...
>>>
>>>     I've looked thru my schematics files and found 3: Rev. 1.1 Update Version
>>> 2, "PORTER_2" Rev. 3.0 Preliminary, and "PORTER_C" Rev. 3.0 Release version!
>>> I'm not sure which of the last 2 should be considered final...
>>
>>     Now I've found 5 versions of the Porter schematics... :-)
>>
>>>>   Porter "B" : mini AB connecter and Max3355 is on the board.
>>>>   Porter "C" : micro AB connect and Max3355 is not on the board. (Select
>>>> host/peripheral by a jumper.)
>>>
>>>     Yeah, seeing JP13 in the PORTER_C schematics.
>>>
>>>> I guess that your current target is "B".
>>>
>>>     If not earlier. It actually has "Henninger B REV2" printed on it and
>>> "Porter PCB 1 R3" on a pasted sticker.
>>>
>>>> If so, I think this patch is acceptable.
>>>
>>>     I'm not so sure now...
>>
>>     My boss told me PORTER_C is a final version, so this patch isn't needed.
>> But then another patch is needed instead: to remove "renesas,enable-gpio"
>> prop from the HS-USB device node...
>
> I am marking this patch as "Rejected" in patchwork.
> If changes are required in this area please either
> resubmit this patch or post a different one.

    Posted a different one on Saturday.

> Thanks.

MBR, Sergei

[PATCH] ARM: dts: silk: add sound support

[Sergei Shtylyov]

Define the SILK board dependent part of the R8A7794 sound  device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
sound support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
in posted earlier this week  in order to build and the R8A7794 PFC driver
patches posted yesterday in  order  for  the pins to be properly configured
(but works without the pins  configured  too)...

 arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: x9-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -183,6 +218,16 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clkc";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -220,6 +265,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -380,3 +431,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};

[PATCH] ARM: dts: silk: add sound support

[Sergei Shtylyov]

Define the SILK board dependent part of the R8A7794 sound  device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
sound support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
in posted earlier this week  in order to build and the R8A7794 PFC driver
patches posted yesterday in  order  for  the pins to be properly configured
(but works without the pins  configured  too)...

 arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: x9-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -183,6 +218,16 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clkc";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -220,6 +265,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec at 12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -380,3 +431,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};

Re: [PATCH] ARM: dts: silk: add sound support

[Kuninori Morimoto]

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec@12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in@20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

[PATCH] ARM: dts: silk: add sound support

[Kuninori Morimoto]

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec at 12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in at 20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

Re: [PATCH] ARM: dts: silk: add sound support

[Kuninori Morimoto]

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec@12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in@20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

[PATCH] ARM: dts: porter: fix JP3 jumper description

[Sergei Shtylyov]

When finishing the Porter sound support patch, I managed to call the JP3
jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
positions...

Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
Horman's 'renesas.git' repo.

arch/arm/boot/dts/r8a7791-porter.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -11,8 +11,8 @@
 /*
  * SSI-AK4642
  *
- * SW3: 1: AK4642
- *      3: ADV7511
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
  *
  * This command is required before playback/capture:
  *

[PATCH] ARM: dts: porter: fix JP3 jumper description

[Sergei Shtylyov]

When finishing the Porter sound support patch, I managed to call the JP3
jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
positions...

Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
Horman's 'renesas.git' repo.

arch/arm/boot/dts/r8a7791-porter.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -11,8 +11,8 @@
 /*
  * SSI-AK4642
  *
- * SW3: 1: AK4642
- *      3: ADV7511
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
  *
  * This command is required before playback/capture:
  *

Re: [PATCH] ARM: dts: porter: fix JP3 jumper description

[Kuninori Morimoto]

Hi

> When finishing the Porter sound support patch, I managed to call the JP3
> jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
> positions...
> 
> Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo.
> 
> arch/arm/boot/dts/r8a7791-porter.dts |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -11,8 +11,8 @@
>  /*
>   * SSI-AK4642
>   *
> - * SW3: 1: AK4642
> - *      3: ADV7511
> + * JP3: 2-1: AK4642
> + *      2-3: ADV7511
>   *
>   * This command is required before playback/capture:
>   *
> 

[PATCH] ARM: dts: porter: fix JP3 jumper description

[Kuninori Morimoto]

Hi

> When finishing the Porter sound support patch, I managed to call the JP3
> jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
> positions...
> 
> Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo.
> 
> arch/arm/boot/dts/r8a7791-porter.dts |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -11,8 +11,8 @@
>  /*
>   * SSI-AK4642
>   *
> - * SW3: 1: AK4642
> - *      3: ADV7511
> + * JP3: 2-1: AK4642
> + *      2-3: ADV7511
>   *
>   * This command is required before playback/capture:
>   *
> 

Re: [PATCH] ARM: dts: porter: fix JP3 jumper description

[Kuninori Morimoto]

Hi

> When finishing the Porter sound support patch, I managed to call the JP3
> jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
> positions...
> 
> Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo.
> 
> arch/arm/boot/dts/r8a7791-porter.dts |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -11,8 +11,8 @@
>  /*
>   * SSI-AK4642
>   *
> - * SW3: 1: AK4642
> - *      3: ADV7511
> + * JP3: 2-1: AK4642
> + *      2-3: ADV7511
>   *
>   * This command is required before playback/capture:
>   *
> 

Re: [PATCH] ARM: dts: porter: fix JP3 jumper description

[Simon Horman]

On Mon, Feb 15, 2016 at 04:50:17AM +0000, Kuninori Morimoto wrote:
> 
> Hi
> 
> > When finishing the Porter sound support patch, I managed to call the JP3
> > jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
> > positions...
> > 
> > Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
> > Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up.

[PATCH] ARM: dts: porter: fix JP3 jumper description

[Simon Horman]

On Mon, Feb 15, 2016 at 04:50:17AM +0000, Kuninori Morimoto wrote:
> 
> Hi
> 
> > When finishing the Porter sound support patch, I managed to call the JP3
> > jumper SW3 in the comment.  Fix this  along with (also miscalled) jumper
> > positions...
> > 
> > Fixes: 493b4da7c10c ("ARM: dts: porter: add sound support")
> > Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up.

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Sergei Shtylyov]

In  the final versions of the Porter board (called "PORTER_C") Renesas
decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
add any other provision to differ the host/gadget mode, so we'll have to
remove  no longer valid "renesas,enable-gpio" property from the HS-USB
device node.  Hopefully, the earlier revisions of the board were never
seen in the wild...

Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'master' branch of Simon Horman's 'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    1 -
 1 file changed, 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Sergei Shtylyov]

In  the final versions of the Porter board (called "PORTER_C") Renesas
decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
add any other provision to differ the host/gadget mode, so we'll have to
remove  no longer valid "renesas,enable-gpio" property from the HS-USB
device node.  Hopefully, the earlier revisions of the board were never
seen in the wild...

Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'master' branch of Simon Horman's 'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |    1 -
 1 file changed, 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {

Re: [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Sergei Shtylyov]

On 02/14/2016 01:26 AM, Sergei Shtylyov wrote:

> In  the final versions of the Porter board (called "PORTER_C") Renesas
> decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
> add any other provision to differ the host/gadget mode, so we'll have to
> remove  no longer valid "renesas,enable-gpio" property from the HS-USB
> device node.  Hopefully, the earlier revisions of the board were never
> seen in the wild...
>
> Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
> Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

    Simon, what about this patch? It was posted 12 days ago and no reaction 
whatsoever...

MBR, Sergei

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Sergei Shtylyov]

On 02/14/2016 01:26 AM, Sergei Shtylyov wrote:

> In  the final versions of the Porter board (called "PORTER_C") Renesas
> decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
> add any other provision to differ the host/gadget mode, so we'll have to
> remove  no longer valid "renesas,enable-gpio" property from the HS-USB
> device node.  Hopefully, the earlier revisions of the board were never
> seen in the wild...
>
> Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
> Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

    Simon, what about this patch? It was posted 12 days ago and no reaction 
whatsoever...

MBR, Sergei

Re: [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Simon Horman]

On Fri, Feb 26, 2016 at 10:43:27PM +0300, Sergei Shtylyov wrote:
> On 02/14/2016 01:26 AM, Sergei Shtylyov wrote:
> 
> >In  the final versions of the Porter board (called "PORTER_C") Renesas
> >decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
> >add any other provision to differ the host/gadget mode, so we'll have to
> >remove  no longer valid "renesas,enable-gpio" property from the HS-USB
> >device node.  Hopefully, the earlier revisions of the board were never
> >seen in the wild...
> >
> >Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
> >Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
>    Simon, what about this patch? It was posted 12 days ago and no reaction
> whatsoever...

Hi Sergei,

sorry for the extended delay. I have queued this up as a fix for v4.5.

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Simon Horman]

On Fri, Feb 26, 2016 at 10:43:27PM +0300, Sergei Shtylyov wrote:
> On 02/14/2016 01:26 AM, Sergei Shtylyov wrote:
> 
> >In  the final versions of the Porter board (called "PORTER_C") Renesas
> >decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
> >add any other provision to differ the host/gadget mode, so we'll have to
> >remove  no longer valid "renesas,enable-gpio" property from the HS-USB
> >device node.  Hopefully, the earlier revisions of the board were never
> >seen in the wild...
> >
> >Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
> >Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
>    Simon, what about this patch? It was posted 12 days ago and no reaction
> whatsoever...

Hi Sergei,

sorry for the extended delay. I have queued this up as a fix for v4.5.

[PATCH] ARM: dts: silk: add DU pins

[Sergei Shtylyov]

Add the (previously omitted) DU pin data to the SILK board's device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
just posted for the pins to be configured...

 arch/arm/boot/dts/r8a7794-silk.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -183,6 +183,16 @@
 		groups = "usb1";
 		function = "usb1";
 	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
 };
 
 &scif2 {
@@ -360,6 +370,8 @@
 };
 
 &du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,

[PATCH] ARM: dts: silk: add DU pins

[Sergei Shtylyov]

Add the (previously omitted) DU pin data to the SILK board's device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
just posted for the pins to be configured...

 arch/arm/boot/dts/r8a7794-silk.dts |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -183,6 +183,16 @@
 		groups = "usb1";
 		function = "usb1";
 	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
 };
 
 &scif2 {
@@ -360,6 +370,8 @@
 };
 
 &du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,

Re: [PATCH] ARM: dts: silk: add DU pins

[Sergei Shtylyov]

Hello.

On 04/13/2016 10:36 PM, Sergei Shtylyov wrote:

> Add the (previously omitted) DU pin data to the SILK board's device tree.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
> just posted for the pins to be configured...

    Simon, this patch seems stuck while the PFC driver patch hit Linus' tree 
long ago. :-(

MBR, Sergei

[PATCH] ARM: dts: silk: add DU pins

[Sergei Shtylyov]

Hello.

On 04/13/2016 10:36 PM, Sergei Shtylyov wrote:

> Add the (previously omitted) DU pin data to the SILK board's device tree.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
> just posted for the pins to be configured...

    Simon, this patch seems stuck while the PFC driver patch hit Linus' tree 
long ago. :-(

MBR, Sergei

Re: [PATCH] ARM: dts: silk: add DU pins

[Simon Horman]

On Fri, Jun 17, 2016 at 11:53:21PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 04/13/2016 10:36 PM, Sergei Shtylyov wrote:
> 
> >Add the (previously omitted) DU pin data to the SILK board's device tree.
> >
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >
> >---
> >This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
> >Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
> >just posted for the pins to be configured...
> 
>    Simon, this patch seems stuck while the PFC driver patch hit Linus' tree
> long ago. :-(

Thanks, I have queued it up.

[PATCH] ARM: dts: silk: add DU pins

[Simon Horman]

On Fri, Jun 17, 2016 at 11:53:21PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 04/13/2016 10:36 PM, Sergei Shtylyov wrote:
> 
> >Add the (previously omitted) DU pin data to the SILK board's device tree.
> >
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >
> >---
> >This patch is against the 'renesas-devel-20160411-v4.6-rc3' tag of Simon
> >Horman's 'renesas.git' repo. It depends on the R8A7794 DU PFC driver patch
> >just posted for the pins to be configured...
> 
>    Simon, this patch seems stuck while the PFC driver patch hit Linus' tree
> long ago. :-(

Thanks, I have queued it up.

[GIT PULL] Second Round of Renesas ARM Based SoC DT Fixes for v4.5

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT fixes for v4.5.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-fixes-for-v4.5,
which you have already pulled.

If this pull-request is too late for v4.5 then please consider it for v4.6.


HS-USB DT support was added to the porter board in v4.5-rc1.
Unfortunately it was developed against an early revision of the
board and newer revisions do not include the Maxim Integrated MAX3355 OTG
chip and thus there should not be a renesas,enable-gpio property.

It is my understanding at this time that the early-revision boards in
question have not been observed in the wild.


The following changes since commit 8bc403b78ffb774d8dc944abb0826c46c0dca09d:

  ARM: dts: silk: Add compatible property to "partitions" node (2016-01-07 08:39:06 +1100)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-fixes2-for-v4.5

for you to fetch changes up to 949024d6702d1da8a266f42226d8402f0df078dc:

  ARM: dts: porter: remove enable prop from HS-USB device node (2016-03-02 09:46:56 +0900)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Fixes for v4.5

* remove enable prop from HS-USB device node on porter board

----------------------------------------------------------------
Sergei Shtylyov (1):
      ARM: dts: porter: remove enable prop from HS-USB device node

 arch/arm/boot/dts/r8a7791-porter.dts | 1 -
 1 file changed, 1 deletion(-)

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

In  the final versions of the Porter board (called "PORTER_C") Renesas
decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
add any other provision to differ the host/gadget mode, so we'll have to
remove  no longer valid "renesas,enable-gpio" property from the HS-USB
device node.  Hopefully, the earlier revisions of the board were never
seen in the wild...

Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-porter.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6713b1ea732b..01d239c3eaaa 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {
-- 
2.1.4

[PATCH] ARM: dts: porter: remove enable prop from HS-USB device node

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

In  the final versions of the Porter board (called "PORTER_C") Renesas
decided to get rid  of the Maxim Integrated MAX3355 OTG chip and didn't
add any other provision to differ the host/gadget mode, so we'll have to
remove  no longer valid "renesas,enable-gpio" property from the HS-USB
device node.  Hopefully, the earlier revisions of the board were never
seen in the wild...

Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-porter.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6713b1ea732b..01d239c3eaaa 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {
-- 
2.1.4