* [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
@ 2016-11-24 1:04 ` marcel at ziswiler.com
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This series updates the device tree for the upcoming V1.1 HW samples.
All changes are purely opportunistic meaning they fix stuff which on
older HW was anyway broken so there should be no backwards
compatibility issues.
Marcel Ziswiler (6):
apalis-tk1: remove spurious new lines
apalis-tk1: temp alert pull-up
apalis-tk1: optional displayport hot-plug detect
apalis-tk1: adjust pin muxing for v1.1 hw
apalis-tk1: working sd card detect on v1.1 hw
apalis-tk1: update compatibility comment
arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
arch/arm/boot/dts/tegra124-apalis.dtsi | 73 +++++++++++-------------------
2 files changed, 29 insertions(+), 55 deletions(-)
--
2.9.3
^ permalink raw reply [flat|nested] 22+ messages in thread
* [RESEND PATCH 1/6] apalis-tk1: remove spurious new lines
2016-11-24 1:04 ` marcel at ziswiler.com
@ 2016-11-24 1:04 ` marcel at ziswiler.com
-1 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Remove some spurious new lines.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 1 -
arch/arm/boot/dts/tegra124-apalis.dtsi | 12 ------------
2 files changed, 13 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 653044a..2b5a0f3 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -232,7 +232,6 @@
backlight: backlight {
compatible = "pwm-backlight";
-
/* BKL1_PWM */
pwms = <&pwm 3 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0819721..6aa4952 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,6 @@
pcie-controller@01003000 {
status = "okay";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pex-pll-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@
hdmi@54280000 {
pll-supply = <®_1v05_avdd_hdmi_pll>;
vdd-supply = <®_3v3_avdd_hdmi>;
-
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -1607,15 +1605,11 @@
compatible = "ams,as3722";
reg = <0x40>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
ams,system-power-controller;
-
#interrupt-cells = <2>;
interrupt-controller;
-
gpio-controller;
#gpio-cells = <2>;
-
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
@@ -1790,7 +1784,6 @@
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
#thermal-sensor-cells = <1>;
};
};
@@ -1823,7 +1816,6 @@
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
-
avdd-supply = <&vdd_1v05>;
hvdd-supply = <®_3v3>;
vddio-supply = <&vdd_1v05>;
@@ -1837,7 +1829,6 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -1919,7 +1910,6 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
@@ -1927,7 +1917,6 @@
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
@@ -1935,7 +1924,6 @@
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 1/6] apalis-tk1: remove spurious new lines
@ 2016-11-24 1:04 ` marcel at ziswiler.com
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Remove some spurious new lines.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 1 -
arch/arm/boot/dts/tegra124-apalis.dtsi | 12 ------------
2 files changed, 13 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 653044a..2b5a0f3 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -232,7 +232,6 @@
backlight: backlight {
compatible = "pwm-backlight";
-
/* BKL1_PWM */
pwms = <&pwm 3 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0819721..6aa4952 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,6 @@
pcie-controller at 01003000 {
status = "okay";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pex-pll-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@
hdmi at 54280000 {
pll-supply = <®_1v05_avdd_hdmi_pll>;
vdd-supply = <®_3v3_avdd_hdmi>;
-
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -1607,15 +1605,11 @@
compatible = "ams,as3722";
reg = <0x40>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
ams,system-power-controller;
-
#interrupt-cells = <2>;
interrupt-controller;
-
gpio-controller;
#gpio-cells = <2>;
-
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
@@ -1790,7 +1784,6 @@
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
#thermal-sensor-cells = <1>;
};
};
@@ -1823,7 +1816,6 @@
sata at 70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
-
avdd-supply = <&vdd_1v05>;
hvdd-supply = <®_3v3>;
vddio-supply = <&vdd_1v05>;
@@ -1837,7 +1829,6 @@
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
avddio-pex-supply = <&vdd_1v05>;
avdd-pll-erefe-supply = <&avdd_1v05>;
avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -1919,7 +1910,6 @@
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
@@ -1927,7 +1917,6 @@
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
@@ -1935,7 +1924,6 @@
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [RESEND PATCH 2/6] apalis-tk1: temp alert pull-up
2016-11-24 1:04 ` marcel at ziswiler.com
@ 2016-11-24 1:04 ` marcel at ziswiler.com
-1 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 6aa4952..0534601 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1151,11 +1151,11 @@
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* GPIO_PI6 aka TEMP_ALERT_L */
+ /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
pi6 {
nvidia,pins = "pi6";
nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 2/6] apalis-tk1: temp alert pull-up
@ 2016-11-24 1:04 ` marcel at ziswiler.com
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 6aa4952..0534601 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1151,11 +1151,11 @@
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* GPIO_PI6 aka TEMP_ALERT_L */
+ /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
pi6 {
nvidia,pins = "pi6";
nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <20161124010456.24604-1-marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org>]
* [RESEND PATCH 3/6] apalis-tk1: optional displayport hot-plug detect
2016-11-24 1:04 ` marcel at ziswiler.com
(?)
@ 2016-11-24 1:04 ` marcel
-1 siblings, 0 replies; 22+ messages in thread
From: marcel-mitwqZ+T+m9Wk0Htik3J/w @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: Marcel Ziswiler, Thierry Reding,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Stephen Warren, Rob Herring,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Mark Rutland,
Alexandre Courbot, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Marcel Ziswiler <marcel.ziswiler-2KBjVHiyJgBBDgjK7y7TUQ@public.gmane.org>
Configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler-2KBjVHiyJgBBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0534601..747ce81 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -255,7 +255,7 @@
};
dp_hpd_pff0 {
nvidia,pins = "dp_hpd_pff0";
- nvidia,function = "rsvd2";
+ nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 3/6] apalis-tk1: optional displayport hot-plug detect
@ 2016-11-24 1:04 ` marcel
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0534601..747ce81 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -255,7 +255,7 @@
};
dp_hpd_pff0 {
nvidia,pins = "dp_hpd_pff0";
- nvidia,function = "rsvd2";
+ nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 3/6] apalis-tk1: optional displayport hot-plug detect
@ 2016-11-24 1:04 ` marcel
0 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0534601..747ce81 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -255,7 +255,7 @@
};
dp_hpd_pff0 {
nvidia,pins = "dp_hpd_pff0";
- nvidia,function = "rsvd2";
+ nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [RESEND PATCH 4/6] apalis-tk1: adjust pin muxing for v1.1 hw
2016-11-24 1:04 ` marcel at ziswiler.com
(?)
@ 2016-11-24 1:04 ` marcel
-1 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Mark Rutland, Alexandre Courbot, Stephen Warren, Marcel Ziswiler,
linux-kernel, Rob Herring, Russell King, Thierry Reding,
linux-tegra, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function
without any pull-up/down.
Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW.
Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka
not tristated and input driver enabled as well as it features some
magic properties even though the external loopback is disabled and the
internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's
SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is
now a not-connect on V1.1 HW in order to avoid any interference.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 53 +++++++++++++++-------------------
1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 747ce81..2bfc579 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -414,18 +414,10 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
- nvidia,function = "sdmmc3";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
@@ -520,20 +512,12 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
- sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
- nvidia,pins = "sdmmc3_clk_lb_out_pee4";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ nvidia,pins = "sdmmc3_cd_n_pv2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPDIF */
@@ -1512,13 +1496,6 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_cd_n_pv2 { /* NC */
- nvidia,pins = "sdmmc3_cd_n_pv2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- };
gpio_x1_aud_px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
@@ -1568,6 +1545,22 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+ * driver enabled aka not tristated and input driver
+ * enabled as well as it features some magic properties
+ * even though the external loopback is disabled and the
+ * internal loopback used as per
+ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+ * bits being set to 0xfffd according to the TRM!
+ */
+ sdmmc3_clk_lb_out_pee4 { /* NC */
+ nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 4/6] apalis-tk1: adjust pin muxing for v1.1 hw
@ 2016-11-24 1:04 ` marcel
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function
without any pull-up/down.
Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW.
Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka
not tristated and input driver enabled as well as it features some
magic properties even though the external loopback is disabled and the
internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's
SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is
now a not-connect on V1.1 HW in order to avoid any interference.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 53 +++++++++++++++-------------------
1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 747ce81..2bfc579 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -414,18 +414,10 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
- nvidia,function = "sdmmc3";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
@@ -520,20 +512,12 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
- sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
- nvidia,pins = "sdmmc3_clk_lb_out_pee4";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ nvidia,pins = "sdmmc3_cd_n_pv2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPDIF */
@@ -1512,13 +1496,6 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_cd_n_pv2 { /* NC */
- nvidia,pins = "sdmmc3_cd_n_pv2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- };
gpio_x1_aud_px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
@@ -1568,6 +1545,22 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+ * driver enabled aka not tristated and input driver
+ * enabled as well as it features some magic properties
+ * even though the external loopback is disabled and the
+ * internal loopback used as per
+ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+ * bits being set to 0xfffd according to the TRM!
+ */
+ sdmmc3_clk_lb_out_pee4 { /* NC */
+ nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 4/6] apalis-tk1: adjust pin muxing for v1.1 hw
@ 2016-11-24 1:04 ` marcel
0 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function
without any pull-up/down.
Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW.
Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka
not tristated and input driver enabled as well as it features some
magic properties even though the external loopback is disabled and the
internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's
SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is
now a not-connect on V1.1 HW in order to avoid any interference.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 53 +++++++++++++++-------------------
1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 747ce81..2bfc579 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -414,18 +414,10 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
- nvidia,function = "sdmmc3";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
@@ -520,20 +512,12 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
- sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
- nvidia,pins = "sdmmc3_clk_lb_out_pee4";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ nvidia,pins = "sdmmc3_cd_n_pv2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPDIF */
@@ -1512,13 +1496,6 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_cd_n_pv2 { /* NC */
- nvidia,pins = "sdmmc3_cd_n_pv2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- };
gpio_x1_aud_px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
@@ -1568,6 +1545,22 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+ * driver enabled aka not tristated and input driver
+ * enabled as well as it features some magic properties
+ * even though the external loopback is disabled and the
+ * internal loopback used as per
+ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+ * bits being set to 0xfffd according to the TRM!
+ */
+ sdmmc3_clk_lb_out_pee4 { /* NC */
+ nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
};
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [RESEND PATCH 5/6] apalis-tk1: working sd card detect on v1.1 hw
2016-11-24 1:04 ` marcel at ziswiler.com
@ 2016-11-24 1:04 ` marcel at ziswiler.com
-1 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 2b5a0f3..2715692 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -187,14 +187,8 @@
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the external
- * loopback is disabled and the internal loopback used as per
- * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
- * set to 0xfffd according to the TRM!
- * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
- */
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 5/6] apalis-tk1: working sd card detect on v1.1 hw
@ 2016-11-24 1:04 ` marcel at ziswiler.com
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 2b5a0f3..2715692 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -187,14 +187,8 @@
/* Apalis SD1 */
sdhci at 700b0400 {
status = "okay";
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the external
- * loopback is disabled and the internal loopback used as per
- * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
- * set to 0xfffd according to the TRM!
- * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
- */
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [RESEND PATCH 6/6] apalis-tk1: update compatibility comment
2016-11-24 1:04 ` marcel at ziswiler.com
@ 2016-11-24 1:04 ` marcel at ziswiler.com
-1 siblings, 0 replies; 22+ messages in thread
From: marcel @ 2016-11-24 1:04 UTC (permalink / raw)
To: devicetree
Cc: Marcel Ziswiler, Thierry Reding, linux-kernel, Stephen Warren,
Rob Herring, linux-tegra, Mark Rutland, Alexandre Courbot,
Russell King, linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Now with the new V1.1A HW card detect being implemented update resp.
compatibility information.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 2bfc579..2276073 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -44,7 +44,7 @@
/*
* Toradex Apalis TK1 Module Device Tree
- * Compatible for Revisions 2GB: V1.0A
+ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
model = "Toradex Apalis TK1";
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* [RESEND PATCH 6/6] apalis-tk1: update compatibility comment
@ 2016-11-24 1:04 ` marcel at ziswiler.com
0 siblings, 0 replies; 22+ messages in thread
From: marcel at ziswiler.com @ 2016-11-24 1:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Now with the new V1.1A HW card detect being implemented update resp.
compatibility information.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 2bfc579..2276073 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -44,7 +44,7 @@
/*
* Toradex Apalis TK1 Module Device Tree
- * Compatible for Revisions 2GB: V1.0A
+ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
model = "Toradex Apalis TK1";
--
2.9.3
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
2016-11-24 1:04 ` marcel at ziswiler.com
(?)
@ 2017-01-03 13:20 ` Marcel Ziswiler
-1 siblings, 0 replies; 22+ messages in thread
From: Marcel Ziswiler @ 2017-01-03 13:20 UTC (permalink / raw)
To: devicetree
Cc: mark.rutland, gnurou, swarren, Marcel Ziswiler, linux-kernel,
linux, robh+dt, thierry.reding, linux-tegra, linux-arm-kernel
On Thu, 2016-11-24 at 02:04 +0100, marcel@ziswiler.com wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This series updates the device tree for the upcoming V1.1 HW samples.
> All changes are purely opportunistic meaning they fix stuff which on
> older HW was anyway broken so there should be no backwards
> compatibility issues.
>
>
> Marcel Ziswiler (6):
> apalis-tk1: remove spurious new lines
> apalis-tk1: temp alert pull-up
> apalis-tk1: optional displayport hot-plug detect
> apalis-tk1: adjust pin muxing for v1.1 hw
> apalis-tk1: working sd card detect on v1.1 hw
> apalis-tk1: update compatibility comment
>
> arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> arch/arm/boot/dts/tegra124-apalis.dtsi | 73 +++++++++++---------
> ----------
> 2 files changed, 29 insertions(+), 55 deletions(-)
Ping.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
@ 2017-01-03 13:20 ` Marcel Ziswiler
0 siblings, 0 replies; 22+ messages in thread
From: Marcel Ziswiler @ 2017-01-03 13:20 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2016-11-24 at 02:04 +0100, marcel at ziswiler.com wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This series updates the device tree for the upcoming V1.1 HW samples.
> All changes are purely opportunistic meaning they fix stuff which on
> older HW was anyway broken so there should be no backwards
> compatibility issues.
>
>
> Marcel Ziswiler (6):
> ? apalis-tk1: remove spurious new lines
> ? apalis-tk1: temp alert pull-up
> ? apalis-tk1: optional displayport hot-plug detect
> ? apalis-tk1: adjust pin muxing for v1.1 hw
> ? apalis-tk1: working sd card detect on v1.1 hw
> ? apalis-tk1: update compatibility comment
>
> ?arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> ?arch/arm/boot/dts/tegra124-apalis.dtsi?????| 73 +++++++++++---------
> ----------
> ?2 files changed, 29 insertions(+), 55 deletions(-)
Ping.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
@ 2017-01-03 13:20 ` Marcel Ziswiler
0 siblings, 0 replies; 22+ messages in thread
From: Marcel Ziswiler @ 2017-01-03 13:20 UTC (permalink / raw)
To: devicetree
Cc: linux-kernel, robh+dt, linux, Marcel Ziswiler, gnurou,
thierry.reding, mark.rutland, linux-arm-kernel, linux-tegra,
swarren
On Thu, 2016-11-24 at 02:04 +0100, marcel@ziswiler.com wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This series updates the device tree for the upcoming V1.1 HW samples.
> All changes are purely opportunistic meaning they fix stuff which on
> older HW was anyway broken so there should be no backwards
> compatibility issues.
>
>
> Marcel Ziswiler (6):
> apalis-tk1: remove spurious new lines
> apalis-tk1: temp alert pull-up
> apalis-tk1: optional displayport hot-plug detect
> apalis-tk1: adjust pin muxing for v1.1 hw
> apalis-tk1: working sd card detect on v1.1 hw
> apalis-tk1: update compatibility comment
>
> arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> arch/arm/boot/dts/tegra124-apalis.dtsi | 73 +++++++++++---------
> ----------
> 2 files changed, 29 insertions(+), 55 deletions(-)
Ping.
^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <1483449646.2745.1.camel-2KBjVHiyJgBBDgjK7y7TUQ@public.gmane.org>]
* Re: [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
2017-01-03 13:20 ` Marcel Ziswiler
(?)
@ 2017-01-25 6:56 ` Thierry Reding
-1 siblings, 0 replies; 22+ messages in thread
From: Thierry Reding @ 2017-01-25 6:56 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
gnurou-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
swarren-3lzwWm7+Weoh9ZMKESR00Q
[-- Attachment #1: Type: text/plain, Size: 1099 bytes --]
On Tue, Jan 03, 2017 at 01:20:48PM +0000, Marcel Ziswiler wrote:
> On Thu, 2016-11-24 at 02:04 +0100, marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org wrote:
> > From: Marcel Ziswiler <marcel.ziswiler-2KBjVHiyJgBBDgjK7y7TUQ@public.gmane.org>
> >
> >
> > This series updates the device tree for the upcoming V1.1 HW samples.
> > All changes are purely opportunistic meaning they fix stuff which on
> > older HW was anyway broken so there should be no backwards
> > compatibility issues.
> >
> >
> > Marcel Ziswiler (6):
> > apalis-tk1: remove spurious new lines
> > apalis-tk1: temp alert pull-up
> > apalis-tk1: optional displayport hot-plug detect
> > apalis-tk1: adjust pin muxing for v1.1 hw
> > apalis-tk1: working sd card detect on v1.1 hw
> > apalis-tk1: update compatibility comment
> >
> > arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> > arch/arm/boot/dts/tegra124-apalis.dtsi | 73 +++++++++++---------
> > ----------
> > 2 files changed, 29 insertions(+), 55 deletions(-)
Applied all but the first, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread
* [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
@ 2017-01-25 6:56 ` Thierry Reding
0 siblings, 0 replies; 22+ messages in thread
From: Thierry Reding @ 2017-01-25 6:56 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 03, 2017 at 01:20:48PM +0000, Marcel Ziswiler wrote:
> On Thu, 2016-11-24 at 02:04 +0100, marcel at ziswiler.com wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> >
> > This series updates the device tree for the upcoming V1.1 HW samples.
> > All changes are purely opportunistic meaning they fix stuff which on
> > older HW was anyway broken so there should be no backwards
> > compatibility issues.
> >
> >
> > Marcel Ziswiler (6):
> > ? apalis-tk1: remove spurious new lines
> > ? apalis-tk1: temp alert pull-up
> > ? apalis-tk1: optional displayport hot-plug detect
> > ? apalis-tk1: adjust pin muxing for v1.1 hw
> > ? apalis-tk1: working sd card detect on v1.1 hw
> > ? apalis-tk1: update compatibility comment
> >
> > ?arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> > ?arch/arm/boot/dts/tegra124-apalis.dtsi?????| 73 +++++++++++---------
> > ----------
> > ?2 files changed, 29 insertions(+), 55 deletions(-)
Applied all but the first, thanks.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170125/fd02828b/attachment.sig>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw
@ 2017-01-25 6:56 ` Thierry Reding
0 siblings, 0 replies; 22+ messages in thread
From: Thierry Reding @ 2017-01-25 6:56 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: devicetree, linux-kernel, robh+dt, linux, gnurou, mark.rutland,
linux-arm-kernel, linux-tegra, swarren
[-- Attachment #1: Type: text/plain, Size: 1044 bytes --]
On Tue, Jan 03, 2017 at 01:20:48PM +0000, Marcel Ziswiler wrote:
> On Thu, 2016-11-24 at 02:04 +0100, marcel@ziswiler.com wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> >
> > This series updates the device tree for the upcoming V1.1 HW samples.
> > All changes are purely opportunistic meaning they fix stuff which on
> > older HW was anyway broken so there should be no backwards
> > compatibility issues.
> >
> >
> > Marcel Ziswiler (6):
> > apalis-tk1: remove spurious new lines
> > apalis-tk1: temp alert pull-up
> > apalis-tk1: optional displayport hot-plug detect
> > apalis-tk1: adjust pin muxing for v1.1 hw
> > apalis-tk1: working sd card detect on v1.1 hw
> > apalis-tk1: update compatibility comment
> >
> > arch/arm/boot/dts/tegra124-apalis-eval.dts | 11 +----
> > arch/arm/boot/dts/tegra124-apalis.dtsi | 73 +++++++++++---------
> > ----------
> > 2 files changed, 29 insertions(+), 55 deletions(-)
Applied all but the first, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread