All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: mturquette@baylibre.com, sboyd@kernel.org, afaerber@suse.de,
	robh+dt@kernel.org, mark.rutland@arm.com
Cc: liuwei@actions-semi.com, mp-cs@actions-semi.com,
	96boards@ucrobotics.com, devicetree@vger.kernel.org,
	davem@davemloft.net, mchehab@kernel.org,
	daniel.thompson@linaro.org, amit.kucheria@linaro.org,
	viresh.kumar@linaro.org, hzhang@ucrobotics.com,
	bdong@ucrobotics.com, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	manivannanece23@gmail.com,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v5 11/12] clk: actions: Add pll clock support
Date: Sat, 17 Mar 2018 15:39:51 +0530	[thread overview]
Message-ID: <20180317100952.28538-12-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180317100952.28538-1-manivannan.sadhasivam@linaro.org>

Add support for Actions Semi PLL clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/actions/Makefile  |   1 +
 drivers/clk/actions/owl-pll.c | 194 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/actions/owl-pll.h |  92 ++++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/clk/actions/owl-pll.c
 create mode 100644 drivers/clk/actions/owl-pll.h

diff --git a/drivers/clk/actions/Makefile b/drivers/clk/actions/Makefile
index dc905b285bdc..22bf986bd67c 100644
--- a/drivers/clk/actions/Makefile
+++ b/drivers/clk/actions/Makefile
@@ -7,3 +7,4 @@ clk-owl-y			+= owl-divider.o
 clk-owl-y			+= owl-factor.o
 clk-owl-y			+= owl-fixed-factor.o
 clk-owl-y			+= owl-composite.o
+clk-owl-y			+= owl-pll.o
diff --git a/drivers/clk/actions/owl-pll.c b/drivers/clk/actions/owl-pll.c
new file mode 100644
index 000000000000..3560c7324f9c
--- /dev/null
+++ b/drivers/clk/actions/owl-pll.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL pll clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include "owl-pll.h"
+
+static u32 owl_pll_calculate_mul(struct owl_pll_hw *pll_hw, unsigned long rate)
+{
+	u32 mul;
+
+	mul = DIV_ROUND_CLOSEST(rate, pll_hw->bfreq);
+	if (mul < pll_hw->min_mul)
+		mul = pll_hw->min_mul;
+	else if (mul > pll_hw->max_mul)
+		mul = pll_hw->max_mul;
+
+	return mul &= mul_mask(pll_hw);
+}
+
+static unsigned int _get_table_rate(const struct clk_pll_table *table,
+		unsigned int val)
+{
+	const struct clk_pll_table *clkt;
+
+	for (clkt = table; clkt->rate; clkt++)
+		if (clkt->val == val)
+			return clkt->rate;
+
+	return 0;
+}
+
+static const struct clk_pll_table *_get_pll_table(
+		const struct clk_pll_table *table, unsigned long rate)
+{
+	const struct clk_pll_table *clkt;
+
+	for (clkt = table; clkt->rate; clkt++) {
+		if (clkt->rate == rate) {
+			table = clkt;
+			break;
+		} else if (clkt->rate < rate)
+			table = clkt;
+	}
+
+	return table;
+}
+
+static long owl_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct clk_pll_table *clkt;
+	u32 mul;
+
+	if (pll_hw->table) {
+		clkt = _get_pll_table(pll_hw->table, rate);
+		return clkt->rate;
+	}
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return pll_hw->bfreq;
+
+	mul = owl_pll_calculate_mul(pll_hw, rate);
+
+	return pll_hw->bfreq * mul;
+}
+
+static unsigned long owl_pll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	u32 val;
+
+	if (pll_hw->table) {
+		regmap_read(common->regmap, pll_hw->reg, &val);
+
+		val = val >> pll_hw->shift;
+		val &= mul_mask(pll_hw);
+
+		return _get_table_rate(pll_hw->table, val);
+	}
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return pll_hw->bfreq;
+
+	regmap_read(common->regmap, pll_hw->reg, &val);
+
+	val = val >> pll_hw->shift;
+	val &= mul_mask(pll_hw);
+
+	return pll_hw->bfreq * val;
+}
+
+static int owl_pll_is_enabled(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	u32 reg;
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	return !!(reg & BIT(pll_hw->bit_idx));
+}
+
+static void owl_pll_set(const struct owl_clk_common *common,
+		       const struct owl_pll_hw *pll_hw, bool enable)
+{
+	u32 reg;
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	if (enable)
+		reg |= BIT(pll_hw->bit_idx);
+	else
+		reg &= ~BIT(pll_hw->bit_idx);
+
+	regmap_write(common->regmap, pll_hw->reg, reg);
+}
+
+static int owl_pll_enable(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	const struct owl_clk_common *common = &pll->common;
+
+	owl_pll_set(common, &pll->pll_hw, true);
+
+	return 0;
+}
+
+static void owl_pll_disable(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	const struct owl_clk_common *common = &pll->common;
+
+	owl_pll_set(common, &pll->pll_hw, false);
+}
+
+static int owl_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	const struct clk_pll_table *clkt;
+	u32 val, reg;
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return 0;
+
+	if (pll_hw->table) {
+		clkt = _get_pll_table(pll_hw->table, rate);
+		val = clkt->val;
+	} else {
+		val = owl_pll_calculate_mul(pll_hw, rate);
+	}
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	reg &= ~mul_mask(pll_hw);
+	reg |= val << pll_hw->shift;
+
+	regmap_write(common->regmap, pll_hw->reg, reg);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	return 0;
+}
+
+const struct clk_ops owl_pll_ops = {
+	.enable = owl_pll_enable,
+	.disable = owl_pll_disable,
+	.is_enabled = owl_pll_is_enabled,
+	.round_rate = owl_pll_round_rate,
+	.recalc_rate = owl_pll_recalc_rate,
+	.set_rate = owl_pll_set_rate,
+};
diff --git a/drivers/clk/actions/owl-pll.h b/drivers/clk/actions/owl-pll.h
new file mode 100644
index 000000000000..0aae30abd5dc
--- /dev/null
+++ b/drivers/clk/actions/owl-pll.h
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL pll clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#ifndef _OWL_PLL_H_
+#define _OWL_PLL_H_
+
+#include "owl-common.h"
+
+/* last entry should have rate = 0 */
+struct clk_pll_table {
+	unsigned int		val;
+	unsigned long		rate;
+};
+
+struct owl_pll_hw {
+	u32			reg;
+	u32			bfreq;
+	u8			bit_idx;
+	u8			shift;
+	u8			width;
+	u8			min_mul;
+	u8			max_mul;
+	const struct clk_pll_table *table;
+};
+
+struct owl_pll {
+	struct owl_pll_hw	pll_hw;
+	struct owl_clk_common	common;
+};
+
+#define OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,			\
+		   _width, _min_mul, _max_mul, _table)			\
+	{								\
+		.reg		= _reg,					\
+		.bfreq		= _bfreq,				\
+		.bit_idx	= _bit_idx,				\
+		.shift		= _shift,				\
+		.width		= _width,				\
+		.min_mul	= _min_mul,				\
+		.max_mul	= _max_mul,				\
+		.table		= _table,				\
+	}
+
+#define OWL_PLL(_struct, _name, _parent, _reg, _bfreq, _bit_idx,	\
+		_shift, _width, _min_mul, _max_mul, _table, _flags)	\
+	struct owl_pll _struct = {					\
+		.pll_hw	= OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,	\
+				     _width, _min_mul,			\
+				     _max_mul, _table),			\
+		.common = {						\
+			.regmap = NULL,					\
+			.hw.init = CLK_HW_INIT(_name,			\
+					       _parent,			\
+					       &owl_pll_ops,		\
+					       _flags),			\
+		},							\
+	}
+
+#define OWL_PLL_NO_PARENT(_struct, _name, _reg, _bfreq, _bit_idx,	\
+		_shift, _width, _min_mul, _max_mul, _table, _flags)	\
+	struct owl_pll _struct = {					\
+		.pll_hw	= OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,	\
+				     _width, _min_mul,			\
+				     _max_mul, _table),			\
+		.common = {						\
+			.regmap = NULL,					\
+			.hw.init = CLK_HW_INIT_NO_PARENT(_name,		\
+					       &owl_pll_ops,		\
+					       _flags),			\
+		},							\
+	}
+
+#define mul_mask(m)		((1 << ((m)->width)) - 1)
+#define PLL_STABILITY_WAIT_US	(50)
+
+static inline struct owl_pll *hw_to_owl_pll(const struct clk_hw *hw)
+{
+	struct owl_clk_common *common = hw_to_owl_clk_common(hw);
+
+	return container_of(common, struct owl_pll, common);
+}
+
+extern const struct clk_ops owl_pll_ops;
+
+#endif /* _OWL_PLL_H_ */
-- 
2.14.1

WARNING: multiple messages have this Message-ID (diff)
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 11/12] clk: actions: Add pll clock support
Date: Sat, 17 Mar 2018 15:39:51 +0530	[thread overview]
Message-ID: <20180317100952.28538-12-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180317100952.28538-1-manivannan.sadhasivam@linaro.org>

Add support for Actions Semi PLL clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/actions/Makefile  |   1 +
 drivers/clk/actions/owl-pll.c | 194 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/actions/owl-pll.h |  92 ++++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/clk/actions/owl-pll.c
 create mode 100644 drivers/clk/actions/owl-pll.h

diff --git a/drivers/clk/actions/Makefile b/drivers/clk/actions/Makefile
index dc905b285bdc..22bf986bd67c 100644
--- a/drivers/clk/actions/Makefile
+++ b/drivers/clk/actions/Makefile
@@ -7,3 +7,4 @@ clk-owl-y			+= owl-divider.o
 clk-owl-y			+= owl-factor.o
 clk-owl-y			+= owl-fixed-factor.o
 clk-owl-y			+= owl-composite.o
+clk-owl-y			+= owl-pll.o
diff --git a/drivers/clk/actions/owl-pll.c b/drivers/clk/actions/owl-pll.c
new file mode 100644
index 000000000000..3560c7324f9c
--- /dev/null
+++ b/drivers/clk/actions/owl-pll.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL pll clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include "owl-pll.h"
+
+static u32 owl_pll_calculate_mul(struct owl_pll_hw *pll_hw, unsigned long rate)
+{
+	u32 mul;
+
+	mul = DIV_ROUND_CLOSEST(rate, pll_hw->bfreq);
+	if (mul < pll_hw->min_mul)
+		mul = pll_hw->min_mul;
+	else if (mul > pll_hw->max_mul)
+		mul = pll_hw->max_mul;
+
+	return mul &= mul_mask(pll_hw);
+}
+
+static unsigned int _get_table_rate(const struct clk_pll_table *table,
+		unsigned int val)
+{
+	const struct clk_pll_table *clkt;
+
+	for (clkt = table; clkt->rate; clkt++)
+		if (clkt->val == val)
+			return clkt->rate;
+
+	return 0;
+}
+
+static const struct clk_pll_table *_get_pll_table(
+		const struct clk_pll_table *table, unsigned long rate)
+{
+	const struct clk_pll_table *clkt;
+
+	for (clkt = table; clkt->rate; clkt++) {
+		if (clkt->rate == rate) {
+			table = clkt;
+			break;
+		} else if (clkt->rate < rate)
+			table = clkt;
+	}
+
+	return table;
+}
+
+static long owl_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct clk_pll_table *clkt;
+	u32 mul;
+
+	if (pll_hw->table) {
+		clkt = _get_pll_table(pll_hw->table, rate);
+		return clkt->rate;
+	}
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return pll_hw->bfreq;
+
+	mul = owl_pll_calculate_mul(pll_hw, rate);
+
+	return pll_hw->bfreq * mul;
+}
+
+static unsigned long owl_pll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	u32 val;
+
+	if (pll_hw->table) {
+		regmap_read(common->regmap, pll_hw->reg, &val);
+
+		val = val >> pll_hw->shift;
+		val &= mul_mask(pll_hw);
+
+		return _get_table_rate(pll_hw->table, val);
+	}
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return pll_hw->bfreq;
+
+	regmap_read(common->regmap, pll_hw->reg, &val);
+
+	val = val >> pll_hw->shift;
+	val &= mul_mask(pll_hw);
+
+	return pll_hw->bfreq * val;
+}
+
+static int owl_pll_is_enabled(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	u32 reg;
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	return !!(reg & BIT(pll_hw->bit_idx));
+}
+
+static void owl_pll_set(const struct owl_clk_common *common,
+		       const struct owl_pll_hw *pll_hw, bool enable)
+{
+	u32 reg;
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	if (enable)
+		reg |= BIT(pll_hw->bit_idx);
+	else
+		reg &= ~BIT(pll_hw->bit_idx);
+
+	regmap_write(common->regmap, pll_hw->reg, reg);
+}
+
+static int owl_pll_enable(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	const struct owl_clk_common *common = &pll->common;
+
+	owl_pll_set(common, &pll->pll_hw, true);
+
+	return 0;
+}
+
+static void owl_pll_disable(struct clk_hw *hw)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	const struct owl_clk_common *common = &pll->common;
+
+	owl_pll_set(common, &pll->pll_hw, false);
+}
+
+static int owl_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct owl_pll *pll = hw_to_owl_pll(hw);
+	struct owl_pll_hw *pll_hw = &pll->pll_hw;
+	const struct owl_clk_common *common = &pll->common;
+	const struct clk_pll_table *clkt;
+	u32 val, reg;
+
+	/* fixed frequency */
+	if (pll_hw->width == 0)
+		return 0;
+
+	if (pll_hw->table) {
+		clkt = _get_pll_table(pll_hw->table, rate);
+		val = clkt->val;
+	} else {
+		val = owl_pll_calculate_mul(pll_hw, rate);
+	}
+
+	regmap_read(common->regmap, pll_hw->reg, &reg);
+
+	reg &= ~mul_mask(pll_hw);
+	reg |= val << pll_hw->shift;
+
+	regmap_write(common->regmap, pll_hw->reg, reg);
+
+	udelay(PLL_STABILITY_WAIT_US);
+
+	return 0;
+}
+
+const struct clk_ops owl_pll_ops = {
+	.enable = owl_pll_enable,
+	.disable = owl_pll_disable,
+	.is_enabled = owl_pll_is_enabled,
+	.round_rate = owl_pll_round_rate,
+	.recalc_rate = owl_pll_recalc_rate,
+	.set_rate = owl_pll_set_rate,
+};
diff --git a/drivers/clk/actions/owl-pll.h b/drivers/clk/actions/owl-pll.h
new file mode 100644
index 000000000000..0aae30abd5dc
--- /dev/null
+++ b/drivers/clk/actions/owl-pll.h
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL pll clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#ifndef _OWL_PLL_H_
+#define _OWL_PLL_H_
+
+#include "owl-common.h"
+
+/* last entry should have rate = 0 */
+struct clk_pll_table {
+	unsigned int		val;
+	unsigned long		rate;
+};
+
+struct owl_pll_hw {
+	u32			reg;
+	u32			bfreq;
+	u8			bit_idx;
+	u8			shift;
+	u8			width;
+	u8			min_mul;
+	u8			max_mul;
+	const struct clk_pll_table *table;
+};
+
+struct owl_pll {
+	struct owl_pll_hw	pll_hw;
+	struct owl_clk_common	common;
+};
+
+#define OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,			\
+		   _width, _min_mul, _max_mul, _table)			\
+	{								\
+		.reg		= _reg,					\
+		.bfreq		= _bfreq,				\
+		.bit_idx	= _bit_idx,				\
+		.shift		= _shift,				\
+		.width		= _width,				\
+		.min_mul	= _min_mul,				\
+		.max_mul	= _max_mul,				\
+		.table		= _table,				\
+	}
+
+#define OWL_PLL(_struct, _name, _parent, _reg, _bfreq, _bit_idx,	\
+		_shift, _width, _min_mul, _max_mul, _table, _flags)	\
+	struct owl_pll _struct = {					\
+		.pll_hw	= OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,	\
+				     _width, _min_mul,			\
+				     _max_mul, _table),			\
+		.common = {						\
+			.regmap = NULL,					\
+			.hw.init = CLK_HW_INIT(_name,			\
+					       _parent,			\
+					       &owl_pll_ops,		\
+					       _flags),			\
+		},							\
+	}
+
+#define OWL_PLL_NO_PARENT(_struct, _name, _reg, _bfreq, _bit_idx,	\
+		_shift, _width, _min_mul, _max_mul, _table, _flags)	\
+	struct owl_pll _struct = {					\
+		.pll_hw	= OWL_PLL_HW(_reg, _bfreq, _bit_idx, _shift,	\
+				     _width, _min_mul,			\
+				     _max_mul, _table),			\
+		.common = {						\
+			.regmap = NULL,					\
+			.hw.init = CLK_HW_INIT_NO_PARENT(_name,		\
+					       &owl_pll_ops,		\
+					       _flags),			\
+		},							\
+	}
+
+#define mul_mask(m)		((1 << ((m)->width)) - 1)
+#define PLL_STABILITY_WAIT_US	(50)
+
+static inline struct owl_pll *hw_to_owl_pll(const struct clk_hw *hw)
+{
+	struct owl_clk_common *common = hw_to_owl_clk_common(hw);
+
+	return container_of(common, struct owl_pll, common);
+}
+
+extern const struct clk_ops owl_pll_ops;
+
+#endif /* _OWL_PLL_H_ */
-- 
2.14.1

  parent reply	other threads:[~2018-03-17 10:12 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-17 10:09 [PATCH v5 00/12] Add clock driver for Actions S900 SoC Manivannan Sadhasivam
2018-03-17 10:09 ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 01/12] dt-bindings: clock: Add Actions S900 clock bindings Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  0:59   ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 02/12] arm64: dts: actions: Add S900 clock management unit nodes Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 03/12] arm64: dts: actions: Source CMU clock for UART5 Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 04/12] clk: actions: Add common clock driver support Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:02   ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 05/12] clk: actions: Add gate clock support Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:04   ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 06/12] clk: actions: Add mux " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:05   ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 07/12] clk: actions: Add divider " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:06   ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 08/12] clk: actions: Add factor " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-18 20:31   ` kbuild test robot
2018-03-18 20:31     ` kbuild test robot
2018-03-18 20:31     ` kbuild test robot
2018-03-20  1:08   ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:11   ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:41   ` kbuild test robot
2018-03-20  1:41     ` kbuild test robot
2018-03-20  1:41     ` kbuild test robot
2018-03-17 10:09 ` [PATCH v5 09/12] clk: actions: Add fixed " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:10   ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  9:04     ` Manivannan Sadhasivam
2018-03-20  9:04       ` Manivannan Sadhasivam
2018-03-20 17:15       ` Stephen Boyd
2018-03-20 17:15         ` Stephen Boyd
2018-03-20 17:15         ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 10/12] clk: actions: Add composite " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` Manivannan Sadhasivam [this message]
2018-03-17 10:09   ` [PATCH v5 11/12] clk: actions: Add pll " Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 12/12] clk: actions: Add S900 SoC " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-18 20:38   ` kbuild test robot
2018-03-18 20:38     ` kbuild test robot
2018-03-18 20:38     ` kbuild test robot
2018-03-18 21:28   ` kbuild test robot
2018-03-18 21:28     ` kbuild test robot
2018-03-18 21:28     ` kbuild test robot
2018-03-20  7:16   ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180317100952.28538-12-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=96boards@ucrobotics.com \
    --cc=afaerber@suse.de \
    --cc=amit.kucheria@linaro.org \
    --cc=bdong@ucrobotics.com \
    --cc=daniel.thompson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=hzhang@ucrobotics.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuwei@actions-semi.com \
    --cc=manivannanece23@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=mp-cs@actions-semi.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.