All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: mturquette@baylibre.com, sboyd@kernel.org, afaerber@suse.de,
	robh+dt@kernel.org, mark.rutland@arm.com
Cc: liuwei@actions-semi.com, mp-cs@actions-semi.com,
	96boards@ucrobotics.com, devicetree@vger.kernel.org,
	davem@davemloft.net, mchehab@kernel.org,
	daniel.thompson@linaro.org, amit.kucheria@linaro.org,
	viresh.kumar@linaro.org, hzhang@ucrobotics.com,
	bdong@ucrobotics.com, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	manivannanece23@gmail.com,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v5 07/12] clk: actions: Add divider clock support
Date: Sat, 17 Mar 2018 15:39:47 +0530	[thread overview]
Message-ID: <20180317100952.28538-8-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180317100952.28538-1-manivannan.sadhasivam@linaro.org>

Add support for Actions Semi divider clock together with
helper functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/actions/Makefile      |  1 +
 drivers/clk/actions/owl-divider.c | 94 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/actions/owl-divider.h | 75 +++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 drivers/clk/actions/owl-divider.c
 create mode 100644 drivers/clk/actions/owl-divider.h

diff --git a/drivers/clk/actions/Makefile b/drivers/clk/actions/Makefile
index 2d4aa8f35d90..5ce75df57e1a 100644
--- a/drivers/clk/actions/Makefile
+++ b/drivers/clk/actions/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_CLK_ACTIONS)	+= clk-owl.o
 clk-owl-y			+= owl-common.o
 clk-owl-y			+= owl-gate.o
 clk-owl-y			+= owl-mux.o
+clk-owl-y			+= owl-divider.o
diff --git a/drivers/clk/actions/owl-divider.c b/drivers/clk/actions/owl-divider.c
new file mode 100644
index 000000000000..cddac00fe324
--- /dev/null
+++ b/drivers/clk/actions/owl-divider.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL divider clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "owl-divider.h"
+
+long owl_divider_helper_round_rate(struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long *parent_rate)
+{
+	return divider_round_rate(&common->hw, rate, parent_rate,
+				  div_hw->table, div_hw->width,
+				  div_hw->div_flags);
+}
+
+static long owl_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_round_rate(&div->common, &div->div_hw,
+					     rate, parent_rate);
+}
+
+unsigned long owl_divider_helper_recalc_rate(struct owl_clk_common *common,
+					 const struct owl_divider_hw *div_hw,
+					 unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	regmap_read(common->regmap, div_hw->reg, &reg);
+	val = reg >> div_hw->shift;
+	val &= (1 << div_hw->width) - 1;
+
+	return divider_recalc_rate(&common->hw, parent_rate,
+				   val, div_hw->table,
+				   div_hw->div_flags,
+				   div_hw->width);
+}
+
+static unsigned long owl_divider_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_recalc_rate(&div->common,
+					      &div->div_hw, parent_rate);
+}
+
+int owl_divider_helper_set_rate(const struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	val = divider_get_val(rate, parent_rate, div_hw->table,
+			      div_hw->width, 0);
+
+	regmap_read(common->regmap, div_hw->reg, &reg);
+	reg &= ~GENMASK(div_hw->width + div_hw->shift - 1, div_hw->shift);
+
+	regmap_write(common->regmap, div_hw->reg,
+			  reg | (val << div_hw->shift));
+
+	return 0;
+}
+
+static int owl_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_set_rate(&div->common, &div->div_hw,
+					rate, parent_rate);
+}
+
+const struct clk_ops owl_divider_ops = {
+	.recalc_rate = owl_divider_recalc_rate,
+	.round_rate = owl_divider_round_rate,
+	.set_rate = owl_divider_set_rate,
+};
diff --git a/drivers/clk/actions/owl-divider.h b/drivers/clk/actions/owl-divider.h
new file mode 100644
index 000000000000..92d3e3d23967
--- /dev/null
+++ b/drivers/clk/actions/owl-divider.h
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL divider clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#ifndef _OWL_DIVIDER_H_
+#define _OWL_DIVIDER_H_
+
+#include "owl-common.h"
+
+struct owl_divider_hw {
+	u32			reg;
+	u8			shift;
+	u8			width;
+	u8			div_flags;
+	struct clk_div_table	*table;
+};
+
+struct owl_divider {
+	struct owl_divider_hw	div_hw;
+	struct owl_clk_common	common;
+};
+
+#define OWL_DIVIDER_HW(_reg, _shift, _width, _div_flags, _table)	\
+	{								\
+		.reg		= _reg,					\
+		.shift		= _shift,				\
+		.width		= _width,				\
+		.div_flags	= _div_flags,				\
+		.table		= _table,				\
+	}
+
+#define OWL_DIVIDER(_struct, _name, _parent, _reg,			\
+		    _shift, _width, _table, _div_flags, _flags)		\
+	struct owl_divider _struct = {					\
+		.div_hw	= OWL_DIVIDER_HW(_reg, _shift, _width,		\
+					 _div_flags, _table),		\
+		.common = {						\
+			.regmap		= NULL,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &owl_divider_ops,	\
+						      _flags),		\
+		},							\
+	}
+
+static inline struct owl_divider *hw_to_owl_divider(const struct clk_hw *hw)
+{
+	struct owl_clk_common *common = hw_to_owl_clk_common(hw);
+
+	return container_of(common, struct owl_divider, common);
+}
+
+long owl_divider_helper_round_rate(struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long *parent_rate);
+
+unsigned long owl_divider_helper_recalc_rate(struct owl_clk_common *common,
+					 const struct owl_divider_hw *div_hw,
+					 unsigned long parent_rate);
+
+int owl_divider_helper_set_rate(const struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long parent_rate);
+
+extern const struct clk_ops owl_divider_ops;
+
+#endif /* _OWL_DIVIDER_H_ */
-- 
2.14.1

WARNING: multiple messages have this Message-ID (diff)
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 07/12] clk: actions: Add divider clock support
Date: Sat, 17 Mar 2018 15:39:47 +0530	[thread overview]
Message-ID: <20180317100952.28538-8-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180317100952.28538-1-manivannan.sadhasivam@linaro.org>

Add support for Actions Semi divider clock together with
helper functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/actions/Makefile      |  1 +
 drivers/clk/actions/owl-divider.c | 94 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/actions/owl-divider.h | 75 +++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 drivers/clk/actions/owl-divider.c
 create mode 100644 drivers/clk/actions/owl-divider.h

diff --git a/drivers/clk/actions/Makefile b/drivers/clk/actions/Makefile
index 2d4aa8f35d90..5ce75df57e1a 100644
--- a/drivers/clk/actions/Makefile
+++ b/drivers/clk/actions/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_CLK_ACTIONS)	+= clk-owl.o
 clk-owl-y			+= owl-common.o
 clk-owl-y			+= owl-gate.o
 clk-owl-y			+= owl-mux.o
+clk-owl-y			+= owl-divider.o
diff --git a/drivers/clk/actions/owl-divider.c b/drivers/clk/actions/owl-divider.c
new file mode 100644
index 000000000000..cddac00fe324
--- /dev/null
+++ b/drivers/clk/actions/owl-divider.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL divider clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "owl-divider.h"
+
+long owl_divider_helper_round_rate(struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long *parent_rate)
+{
+	return divider_round_rate(&common->hw, rate, parent_rate,
+				  div_hw->table, div_hw->width,
+				  div_hw->div_flags);
+}
+
+static long owl_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_round_rate(&div->common, &div->div_hw,
+					     rate, parent_rate);
+}
+
+unsigned long owl_divider_helper_recalc_rate(struct owl_clk_common *common,
+					 const struct owl_divider_hw *div_hw,
+					 unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	regmap_read(common->regmap, div_hw->reg, &reg);
+	val = reg >> div_hw->shift;
+	val &= (1 << div_hw->width) - 1;
+
+	return divider_recalc_rate(&common->hw, parent_rate,
+				   val, div_hw->table,
+				   div_hw->div_flags,
+				   div_hw->width);
+}
+
+static unsigned long owl_divider_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_recalc_rate(&div->common,
+					      &div->div_hw, parent_rate);
+}
+
+int owl_divider_helper_set_rate(const struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long parent_rate)
+{
+	unsigned long val;
+	unsigned int reg;
+
+	val = divider_get_val(rate, parent_rate, div_hw->table,
+			      div_hw->width, 0);
+
+	regmap_read(common->regmap, div_hw->reg, &reg);
+	reg &= ~GENMASK(div_hw->width + div_hw->shift - 1, div_hw->shift);
+
+	regmap_write(common->regmap, div_hw->reg,
+			  reg | (val << div_hw->shift));
+
+	return 0;
+}
+
+static int owl_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct owl_divider *div = hw_to_owl_divider(hw);
+
+	return owl_divider_helper_set_rate(&div->common, &div->div_hw,
+					rate, parent_rate);
+}
+
+const struct clk_ops owl_divider_ops = {
+	.recalc_rate = owl_divider_recalc_rate,
+	.round_rate = owl_divider_round_rate,
+	.set_rate = owl_divider_set_rate,
+};
diff --git a/drivers/clk/actions/owl-divider.h b/drivers/clk/actions/owl-divider.h
new file mode 100644
index 000000000000..92d3e3d23967
--- /dev/null
+++ b/drivers/clk/actions/owl-divider.h
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// OWL divider clock driver
+//
+// Copyright (c) 2014 Actions Semi Inc.
+// Author: David Liu <liuwei@actions-semi.com>
+//
+// Copyright (c) 2018 Linaro Ltd.
+// Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+#ifndef _OWL_DIVIDER_H_
+#define _OWL_DIVIDER_H_
+
+#include "owl-common.h"
+
+struct owl_divider_hw {
+	u32			reg;
+	u8			shift;
+	u8			width;
+	u8			div_flags;
+	struct clk_div_table	*table;
+};
+
+struct owl_divider {
+	struct owl_divider_hw	div_hw;
+	struct owl_clk_common	common;
+};
+
+#define OWL_DIVIDER_HW(_reg, _shift, _width, _div_flags, _table)	\
+	{								\
+		.reg		= _reg,					\
+		.shift		= _shift,				\
+		.width		= _width,				\
+		.div_flags	= _div_flags,				\
+		.table		= _table,				\
+	}
+
+#define OWL_DIVIDER(_struct, _name, _parent, _reg,			\
+		    _shift, _width, _table, _div_flags, _flags)		\
+	struct owl_divider _struct = {					\
+		.div_hw	= OWL_DIVIDER_HW(_reg, _shift, _width,		\
+					 _div_flags, _table),		\
+		.common = {						\
+			.regmap		= NULL,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &owl_divider_ops,	\
+						      _flags),		\
+		},							\
+	}
+
+static inline struct owl_divider *hw_to_owl_divider(const struct clk_hw *hw)
+{
+	struct owl_clk_common *common = hw_to_owl_clk_common(hw);
+
+	return container_of(common, struct owl_divider, common);
+}
+
+long owl_divider_helper_round_rate(struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long *parent_rate);
+
+unsigned long owl_divider_helper_recalc_rate(struct owl_clk_common *common,
+					 const struct owl_divider_hw *div_hw,
+					 unsigned long parent_rate);
+
+int owl_divider_helper_set_rate(const struct owl_clk_common *common,
+				const struct owl_divider_hw *div_hw,
+				unsigned long rate,
+				unsigned long parent_rate);
+
+extern const struct clk_ops owl_divider_ops;
+
+#endif /* _OWL_DIVIDER_H_ */
-- 
2.14.1

  parent reply	other threads:[~2018-03-17 10:11 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-17 10:09 [PATCH v5 00/12] Add clock driver for Actions S900 SoC Manivannan Sadhasivam
2018-03-17 10:09 ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 01/12] dt-bindings: clock: Add Actions S900 clock bindings Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  0:59   ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-20  0:59     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 02/12] arm64: dts: actions: Add S900 clock management unit nodes Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 03/12] arm64: dts: actions: Source CMU clock for UART5 Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 04/12] clk: actions: Add common clock driver support Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:02   ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-20  1:02     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 05/12] clk: actions: Add gate clock support Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:04   ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-20  1:04     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 06/12] clk: actions: Add mux " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:05   ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-20  1:05     ` Stephen Boyd
2018-03-17 10:09 ` Manivannan Sadhasivam [this message]
2018-03-17 10:09   ` [PATCH v5 07/12] clk: actions: Add divider " Manivannan Sadhasivam
2018-03-20  1:06   ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-20  1:06     ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 08/12] clk: actions: Add factor " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-18 20:31   ` kbuild test robot
2018-03-18 20:31     ` kbuild test robot
2018-03-18 20:31     ` kbuild test robot
2018-03-20  1:08   ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:08     ` Stephen Boyd
2018-03-20  1:11   ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:11     ` Stephen Boyd
2018-03-20  1:41   ` kbuild test robot
2018-03-20  1:41     ` kbuild test robot
2018-03-20  1:41     ` kbuild test robot
2018-03-17 10:09 ` [PATCH v5 09/12] clk: actions: Add fixed " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-20  1:10   ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  1:10     ` Stephen Boyd
2018-03-20  9:04     ` Manivannan Sadhasivam
2018-03-20  9:04       ` Manivannan Sadhasivam
2018-03-20 17:15       ` Stephen Boyd
2018-03-20 17:15         ` Stephen Boyd
2018-03-20 17:15         ` Stephen Boyd
2018-03-17 10:09 ` [PATCH v5 10/12] clk: actions: Add composite " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 11/12] clk: actions: Add pll " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-17 10:09 ` [PATCH v5 12/12] clk: actions: Add S900 SoC " Manivannan Sadhasivam
2018-03-17 10:09   ` Manivannan Sadhasivam
2018-03-18 20:38   ` kbuild test robot
2018-03-18 20:38     ` kbuild test robot
2018-03-18 20:38     ` kbuild test robot
2018-03-18 21:28   ` kbuild test robot
2018-03-18 21:28     ` kbuild test robot
2018-03-18 21:28     ` kbuild test robot
2018-03-20  7:16   ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd
2018-03-20  7:16     ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180317100952.28538-8-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=96boards@ucrobotics.com \
    --cc=afaerber@suse.de \
    --cc=amit.kucheria@linaro.org \
    --cc=bdong@ucrobotics.com \
    --cc=daniel.thompson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=hzhang@ucrobotics.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuwei@actions-semi.com \
    --cc=manivannanece23@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=mp-cs@actions-semi.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.