* [PATCH 1/3] myrb: Add Mylex RAID controller (block interface)
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
@ 2018-10-12 7:15 ` Hannes Reinecke
2018-10-17 7:26 ` Christoph Hellwig
2018-10-12 7:15 ` [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface) Hannes Reinecke
` (3 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2018-10-12 7:15 UTC (permalink / raw)
To: Jens Axboe
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block, Hannes Reinecke, Hannes Reinecke
This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only.
The driver is a re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
MAINTAINERS | 6 +
drivers/scsi/Kconfig | 15 +
drivers/scsi/Makefile | 1 +
drivers/scsi/myrb.c | 3656 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/myrb.h | 958 +++++++++++++
include/linux/pci_ids.h | 2 +
6 files changed, 4638 insertions(+)
create mode 100644 drivers/scsi/myrb.c
create mode 100644 drivers/scsi/myrb.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a5b256b25905..f6dde2ff49b3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9892,6 +9892,12 @@ S: Supported
F: drivers/gpu/drm/mxsfb/
F: Documentation/devicetree/bindings/display/mxsfb.txt
+MYLEX DAC960 PCI RAID Controller
+M: Hannes Reinecke <hare@kernel.org>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/myrb.*
+
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
M: Chris Lee <christopher.lee@cspi.com>
L: netdev@vger.kernel.org
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8fc851a9e116..f2a71bb74f48 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -557,6 +557,21 @@ config SCSI_FLASHPOINT
substantial, so users of MultiMaster Host Adapters may not
wish to include it.
+config SCSI_MYRB
+ tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)"
+ depends on PCI
+ select RAID_ATTRS
+ help
+ This driver adds support for the Mylex DAC960, AcceleRAID, and
+ eXtremeRAID PCI RAID controllers. This driver supports the
+ older, block based interface.
+ This driver is a reimplementation of the original DAC960
+ driver. If you have used the DAC960 driver you should enable
+ this module.
+
+ To compile this driver as a module, choose M here: the
+ module will be called myrb.
+
config VMWARE_PVSCSI
tristate "VMware PVSCSI driver support"
depends on PCI && SCSI && X86
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 6d71b2a9592b..cfd58ffc0b61 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
+obj-$(CONFIG_SCSI_MYRB) += myrb.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
new file mode 100644
index 000000000000..c2e660841388
--- /dev/null
+++ b/drivers/scsi/myrb.c
@@ -0,0 +1,3656 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
+ *
+ * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
+ *
+ * Based on the original DAC960 driver,
+ * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
+ * Portions Copyright 2002 by Mylex (An IBM Business Unit)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/raid_class.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include "myrb.h"
+
+static struct raid_template *myrb_raid_template;
+
+static void myrb_monitor(struct work_struct *work);
+static inline void myrb_translate_devstate(void *DeviceState);
+
+static inline int myrb_logical_channel(struct Scsi_Host *shost)
+{
+ return shost->max_channel - 1;
+}
+
+static struct myrb_devstate_name_entry {
+ enum myrb_devstate state;
+ const char *name;
+} myrb_devstate_name_list[] = {
+ { MYRB_DEVICE_DEAD, "Dead" },
+ { MYRB_DEVICE_WO, "WriteOnly" },
+ { MYRB_DEVICE_ONLINE, "Online" },
+ { MYRB_DEVICE_CRITICAL, "Critical" },
+ { MYRB_DEVICE_STANDBY, "Standby" },
+ { MYRB_DEVICE_OFFLINE, "Offline" },
+};
+
+static const char *myrb_devstate_name(enum myrb_devstate state)
+{
+ struct myrb_devstate_name_entry *entry = myrb_devstate_name_list;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(myrb_devstate_name_list); i++) {
+ if (entry[i].state == state)
+ return entry[i].name;
+ }
+ return "Unknown";
+}
+
+static struct myrb_raidlevel_name_entry {
+ enum myrb_raidlevel level;
+ const char *name;
+} myrb_raidlevel_name_list[] = {
+ { MYRB_RAID_LEVEL0, "RAID0" },
+ { MYRB_RAID_LEVEL1, "RAID1" },
+ { MYRB_RAID_LEVEL3, "RAID3" },
+ { MYRB_RAID_LEVEL5, "RAID5" },
+ { MYRB_RAID_LEVEL6, "RAID6" },
+ { MYRB_RAID_JBOD, "JBOD" },
+};
+
+static const char *myrb_raidlevel_name(enum myrb_raidlevel level)
+{
+ struct myrb_raidlevel_name_entry *entry = myrb_raidlevel_name_list;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(myrb_raidlevel_name_list); i++) {
+ if (entry[i].level == level)
+ return entry[i].name;
+ }
+ return NULL;
+}
+
+/**
+ * myrb_create_mempools - allocates auxiliary data structures
+ *
+ * Return: true on success, false otherwise.
+ */
+static bool myrb_create_mempools(struct pci_dev *pdev, struct myrb_hba *cb)
+{
+ size_t elem_size, elem_align;
+
+ elem_align = sizeof(struct myrb_sge);
+ elem_size = cb->host->sg_tablesize * elem_align;
+ cb->sg_pool = dma_pool_create("myrb_sg", &pdev->dev,
+ elem_size, elem_align, 0);
+ if (cb->sg_pool == NULL) {
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to allocate SG pool\n");
+ return false;
+ }
+
+ cb->dcdb_pool = dma_pool_create("myrb_dcdb", &pdev->dev,
+ sizeof(struct myrb_dcdb),
+ sizeof(unsigned int), 0);
+ if (!cb->dcdb_pool) {
+ dma_pool_destroy(cb->sg_pool);
+ cb->sg_pool = NULL;
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to allocate DCDB pool\n");
+ return false;
+ }
+
+ snprintf(cb->work_q_name, sizeof(cb->work_q_name),
+ "myrb_wq_%d", cb->host->host_no);
+ cb->work_q = create_singlethread_workqueue(cb->work_q_name);
+ if (!cb->work_q) {
+ dma_pool_destroy(cb->dcdb_pool);
+ cb->dcdb_pool = NULL;
+ dma_pool_destroy(cb->sg_pool);
+ cb->sg_pool = NULL;
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to create workqueue\n");
+ return false;
+ }
+
+ /*
+ * Initialize the Monitoring Timer.
+ */
+ INIT_DELAYED_WORK(&cb->monitor_work, myrb_monitor);
+ queue_delayed_work(cb->work_q, &cb->monitor_work, 1);
+
+ return true;
+}
+
+/**
+ * myrb_destroy_mempools - tears down the memory pools for the controller
+ */
+static void myrb_destroy_mempools(struct myrb_hba *cb)
+{
+ cancel_delayed_work_sync(&cb->monitor_work);
+ destroy_workqueue(cb->work_q);
+
+ dma_pool_destroy(cb->sg_pool);
+ dma_pool_destroy(cb->dcdb_pool);
+}
+
+/**
+ * myrb_reset_cmd - reset command block
+ */
+static inline void myrb_reset_cmd(struct myrb_cmdblk *cmd_blk)
+{
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+
+ memset(mbox, 0, sizeof(union myrb_cmd_mbox));
+ cmd_blk->status = 0;
+}
+
+/**
+ * myrb_qcmd - queues command block for execution
+ */
+static void myrb_qcmd(struct myrb_hba *cb, struct myrb_cmdblk *cmd_blk)
+{
+ void __iomem *base = cb->io_base;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ union myrb_cmd_mbox *next_mbox = cb->next_cmd_mbox;
+
+ cb->write_cmd_mbox(next_mbox, mbox);
+ if (cb->prev_cmd_mbox1->words[0] == 0 ||
+ cb->prev_cmd_mbox2->words[0] == 0)
+ cb->get_cmd_mbox(base);
+ cb->prev_cmd_mbox2 = cb->prev_cmd_mbox1;
+ cb->prev_cmd_mbox1 = next_mbox;
+ if (++next_mbox > cb->last_cmd_mbox)
+ next_mbox = cb->first_cmd_mbox;
+ cb->next_cmd_mbox = next_mbox;
+}
+
+/**
+ * myrb_exec_cmd - executes command block and waits for completion.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_exec_cmd(struct myrb_hba *cb,
+ struct myrb_cmdblk *cmd_blk)
+{
+ DECLARE_COMPLETION_ONSTACK(cmpl);
+ unsigned long flags;
+
+ cmd_blk->completion = &cmpl;
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ cb->qcmd(cb, cmd_blk);
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+
+ WARN_ON(in_interrupt());
+ wait_for_completion(&cmpl);
+ return cmd_blk->status;
+}
+
+/**
+ * myrb_exec_type3 - executes a type 3 command and waits for completion.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_exec_type3(struct myrb_hba *cb,
+ enum myrb_cmd_opcode op, dma_addr_t addr)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->dcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ unsigned short status;
+
+ mutex_lock(&cb->dcmd_mutex);
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3.id = MYRB_DCMD_TAG;
+ mbox->type3.opcode = op;
+ mbox->type3.addr = addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ mutex_unlock(&cb->dcmd_mutex);
+ return status;
+}
+
+/**
+ * myrb_exec_type3D - executes a type 3D command and waits for completion.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_exec_type3D(struct myrb_hba *cb,
+ enum myrb_cmd_opcode op, struct scsi_device *sdev,
+ struct myrb_pdev_state *pdev_info)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->dcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ unsigned short status;
+ dma_addr_t pdev_info_addr;
+
+ pdev_info_addr = dma_map_single(&cb->pdev->dev, pdev_info,
+ sizeof(struct myrb_pdev_state),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&cb->pdev->dev, pdev_info_addr))
+ return MYRB_STATUS_SUBSYS_FAILED;
+
+ mutex_lock(&cb->dcmd_mutex);
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3D.id = MYRB_DCMD_TAG;
+ mbox->type3D.opcode = op;
+ mbox->type3D.channel = sdev->channel;
+ mbox->type3D.target = sdev->id;
+ mbox->type3D.addr = pdev_info_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ mutex_unlock(&cb->dcmd_mutex);
+ dma_unmap_single(&cb->pdev->dev, pdev_info_addr,
+ sizeof(struct myrb_pdev_state), DMA_FROM_DEVICE);
+ if (status == MYRB_STATUS_SUCCESS &&
+ mbox->type3D.opcode == MYRB_CMD_GET_DEVICE_STATE_OLD)
+ myrb_translate_devstate(pdev_info);
+
+ return status;
+}
+
+static char *myrb_event_msg[] = {
+ "killed because write recovery failed",
+ "killed because of SCSI bus reset failure",
+ "killed because of double check condition",
+ "killed because it was removed",
+ "killed because of gross error on SCSI chip",
+ "killed because of bad tag returned from drive",
+ "killed because of timeout on SCSI command",
+ "killed because of reset SCSI command issued from system",
+ "killed because busy or parity error count exceeded limit",
+ "killed because of 'kill drive' command from system",
+ "killed because of selection timeout",
+ "killed due to SCSI phase sequence error",
+ "killed due to unknown status",
+};
+
+/**
+ * myrb_get_event - get event log from HBA
+ * @cb: pointer to the hba structure
+ * @event: number of the event
+ *
+ * Execute a type 3E command and logs the event message
+ */
+static void myrb_get_event(struct myrb_hba *cb, unsigned int event)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->mcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_log_entry *ev_buf;
+ dma_addr_t ev_addr;
+ unsigned short status;
+
+ ev_buf = dma_alloc_coherent(&cb->pdev->dev,
+ sizeof(struct myrb_log_entry),
+ &ev_addr, GFP_KERNEL);
+ if (!ev_buf)
+ return;
+
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3E.id = MYRB_MCMD_TAG;
+ mbox->type3E.opcode = MYRB_CMD_EVENT_LOG_OPERATION;
+ mbox->type3E.optype = DAC960_V1_GetEventLogEntry;
+ mbox->type3E.opqual = 1;
+ mbox->type3E.ev_seq = event;
+ mbox->type3E.addr = ev_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ if (status != MYRB_STATUS_SUCCESS)
+ shost_printk(KERN_INFO, cb->host,
+ "Failed to get event log %d, status %04x\n",
+ event, status);
+
+ else if (ev_buf->seq_num == event) {
+ struct scsi_sense_hdr sshdr;
+
+ memset(&sshdr, 0, sizeof(sshdr));
+ scsi_normalize_sense(ev_buf->sense, 32, &sshdr);
+
+ if (sshdr.sense_key == VENDOR_SPECIFIC &&
+ sshdr.asc == 0x80 &&
+ sshdr.ascq < ARRAY_SIZE(myrb_event_msg))
+ shost_printk(KERN_CRIT, cb->host,
+ "Physical drive %d:%d: %s\n",
+ ev_buf->channel, ev_buf->target,
+ myrb_event_msg[sshdr.ascq]);
+ else
+ shost_printk(KERN_CRIT, cb->host,
+ "Physical drive %d:%d: Sense: %X/%02X/%02X\n",
+ ev_buf->channel, ev_buf->target,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ }
+
+ dma_free_coherent(&cb->pdev->dev, sizeof(struct myrb_log_entry),
+ ev_buf, ev_addr);
+}
+
+/**
+ * myrb_get_errtable - retrieves the error table from the controller
+ *
+ * Executes a type 3 command and logs the error table from the controller.
+ */
+static void myrb_get_errtable(struct myrb_hba *cb)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->mcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ unsigned short status;
+ struct myrb_error_entry old_table[MYRB_MAX_CHANNELS * MYRB_MAX_TARGETS];
+
+ memcpy(&old_table, cb->err_table, sizeof(old_table));
+
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3.id = MYRB_MCMD_TAG;
+ mbox->type3.opcode = MYRB_CMD_GET_ERROR_TABLE;
+ mbox->type3.addr = cb->err_table_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ if (status == MYRB_STATUS_SUCCESS) {
+ struct myrb_error_entry *table = cb->err_table;
+ struct myrb_error_entry *new, *old;
+ size_t err_table_offset;
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, cb->host) {
+ if (sdev->channel >= myrb_logical_channel(cb->host))
+ continue;
+ err_table_offset = sdev->channel * MYRB_MAX_TARGETS
+ + sdev->id;
+ new = table + err_table_offset;
+ old = &old_table[err_table_offset];
+ if (new->parity_err == old->parity_err &&
+ new->soft_err == old->soft_err &&
+ new->hard_err == old->hard_err &&
+ new->misc_err == old->misc_err)
+ continue;
+ sdev_printk(KERN_CRIT, sdev,
+ "Errors: Parity = %d, Soft = %d, Hard = %d, Misc = %d\n",
+ new->parity_err, new->soft_err,
+ new->hard_err, new->misc_err);
+ }
+ }
+}
+
+/**
+ * myrb_get_ldev_info - retrieves the logical device table from the controller
+ *
+ * Executes a type 3 command and updates the logical device table.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_get_ldev_info(struct myrb_hba *cb)
+{
+ unsigned short status;
+ int ldev_num, ldev_cnt = cb->enquiry->ldev_count;
+ struct Scsi_Host *shost = cb->host;
+
+ status = myrb_exec_type3(cb, MYRB_CMD_GET_LDEV_INFO,
+ cb->ldev_info_addr);
+ if (status != MYRB_STATUS_SUCCESS)
+ return status;
+
+ for (ldev_num = 0; ldev_num < ldev_cnt; ldev_num++) {
+ struct myrb_ldev_info *old = NULL;
+ struct myrb_ldev_info *new = cb->ldev_info_buf + ldev_num;
+ struct scsi_device *sdev;
+
+ sdev = scsi_device_lookup(shost, myrb_logical_channel(shost),
+ ldev_num, 0);
+ if (!sdev) {
+ if (new->state == MYRB_DEVICE_OFFLINE)
+ continue;
+ shost_printk(KERN_INFO, shost,
+ "Adding Logical Drive %d in state %s\n",
+ ldev_num, myrb_devstate_name(new->state));
+ scsi_add_device(shost, myrb_logical_channel(shost),
+ ldev_num, 0);
+ continue;
+ }
+ old = sdev->hostdata;
+ if (new->state != old->state)
+ shost_printk(KERN_INFO, shost,
+ "Logical Drive %d is now %s\n",
+ ldev_num, myrb_devstate_name(new->state));
+ if (new->wb_enabled != old->wb_enabled)
+ sdev_printk(KERN_INFO, sdev,
+ "Logical Drive is now WRITE %s\n",
+ (new->wb_enabled ? "BACK" : "THRU"));
+ memcpy(old, new, sizeof(*new));
+ scsi_device_put(sdev);
+ }
+ return status;
+}
+
+/**
+ * myrb_get_rbld_progress - get rebuild progress information
+ *
+ * Executes a type 3 command and returns the rebuild progress
+ * information.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_get_rbld_progress(struct myrb_hba *cb,
+ struct myrb_rbld_progress *rbld)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->mcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_rbld_progress *rbld_buf;
+ dma_addr_t rbld_addr;
+ unsigned short status;
+
+ rbld_buf = dma_alloc_coherent(&cb->pdev->dev,
+ sizeof(struct myrb_rbld_progress),
+ &rbld_addr, GFP_KERNEL);
+ if (!rbld_buf)
+ return MYRB_STATUS_RBLD_NOT_CHECKED;
+
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3.id = MYRB_MCMD_TAG;
+ mbox->type3.opcode = MYRB_CMD_GET_REBUILD_PROGRESS;
+ mbox->type3.addr = rbld_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ if (rbld)
+ memcpy(rbld, rbld_buf, sizeof(struct myrb_rbld_progress));
+ dma_free_coherent(&cb->pdev->dev, sizeof(struct myrb_rbld_progress),
+ rbld_buf, rbld_addr);
+ return status;
+}
+
+/**
+ * myrb_update_rbld_progress - updates the rebuild status
+ *
+ * Updates the rebuild status for the attached logical devices.
+ *
+ */
+static void myrb_update_rbld_progress(struct myrb_hba *cb)
+{
+ struct myrb_rbld_progress rbld_buf;
+ unsigned short status;
+
+ status = myrb_get_rbld_progress(cb, &rbld_buf);
+ if (status == MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS &&
+ cb->last_rbld_status == MYRB_STATUS_SUCCESS)
+ status = MYRB_STATUS_RBLD_SUCCESS;
+ if (status != MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS) {
+ unsigned int blocks_done =
+ rbld_buf.ldev_size - rbld_buf.blocks_left;
+ struct scsi_device *sdev;
+
+ sdev = scsi_device_lookup(cb->host,
+ myrb_logical_channel(cb->host),
+ rbld_buf.ldev_num, 0);
+ if (!sdev)
+ return;
+
+ switch (status) {
+ case MYRB_STATUS_SUCCESS:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild in Progress, %d%% completed\n",
+ (100 * (blocks_done >> 7))
+ / (rbld_buf.ldev_size >> 7));
+ break;
+ case MYRB_STATUS_RBLD_FAILED_LDEV_FAILURE:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Failed due to Logical Drive Failure\n");
+ break;
+ case MYRB_STATUS_RBLD_FAILED_BADBLOCKS:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Failed due to Bad Blocks on Other Drives\n");
+ break;
+ case MYRB_STATUS_RBLD_FAILED_NEW_DRIVE_FAILED:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Failed due to Failure of Drive Being Rebuilt\n");
+ break;
+ case MYRB_STATUS_RBLD_SUCCESS:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Completed Successfully\n");
+ break;
+ case MYRB_STATUS_RBLD_SUCCESS_TERMINATED:
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Successfully Terminated\n");
+ break;
+ default:
+ break;
+ }
+ scsi_device_put(sdev);
+ }
+ cb->last_rbld_status = status;
+}
+
+/**
+ * myrb_get_cc_progress - retrieve the rebuild status
+ *
+ * Execute a type 3 Command and fetch the rebuild / consistency check
+ * status.
+ */
+static void myrb_get_cc_progress(struct myrb_hba *cb)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->mcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_rbld_progress *rbld_buf;
+ dma_addr_t rbld_addr;
+ unsigned short status;
+
+ rbld_buf = dma_alloc_coherent(&cb->pdev->dev,
+ sizeof(struct myrb_rbld_progress),
+ &rbld_addr, GFP_KERNEL);
+ if (!rbld_buf) {
+ cb->need_cc_status = true;
+ return;
+ }
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3.id = MYRB_MCMD_TAG;
+ mbox->type3.opcode = MYRB_CMD_REBUILD_STAT;
+ mbox->type3.addr = rbld_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ if (status == MYRB_STATUS_SUCCESS) {
+ unsigned int ldev_num = rbld_buf->ldev_num;
+ unsigned int ldev_size = rbld_buf->ldev_size;
+ unsigned int blocks_done =
+ ldev_size - rbld_buf->blocks_left;
+ struct scsi_device *sdev;
+
+ sdev = scsi_device_lookup(cb->host,
+ myrb_logical_channel(cb->host),
+ ldev_num, 0);
+ if (sdev) {
+ sdev_printk(KERN_INFO, sdev,
+ "Consistency Check in Progress: %d%% completed\n",
+ (100 * (blocks_done >> 7))
+ / (ldev_size >> 7));
+ scsi_device_put(sdev);
+ }
+ }
+ dma_free_coherent(&cb->pdev->dev, sizeof(struct myrb_rbld_progress),
+ rbld_buf, rbld_addr);
+}
+
+/**
+ * myrb_bgi_control - updates background initialisation status
+ *
+ * Executes a type 3B command and updates the background initialisation status
+ */
+static void myrb_bgi_control(struct myrb_hba *cb)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->mcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_bgi_status *bgi, *last_bgi;
+ dma_addr_t bgi_addr;
+ struct scsi_device *sdev = NULL;
+ unsigned short status;
+
+ bgi = dma_alloc_coherent(&cb->pdev->dev, sizeof(struct myrb_bgi_status),
+ &bgi_addr, GFP_KERNEL);
+ if (!bgi) {
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to allocate bgi memory\n");
+ return;
+ }
+ myrb_reset_cmd(cmd_blk);
+ mbox->type3B.id = MYRB_DCMD_TAG;
+ mbox->type3B.opcode = MYRB_CMD_BGI_CONTROL;
+ mbox->type3B.optype = 0x20;
+ mbox->type3B.addr = bgi_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ last_bgi = &cb->bgi_status;
+ sdev = scsi_device_lookup(cb->host,
+ myrb_logical_channel(cb->host),
+ bgi->ldev_num, 0);
+ switch (status) {
+ case MYRB_STATUS_SUCCESS:
+ switch (bgi->status) {
+ case MYRB_BGI_INVALID:
+ break;
+ case MYRB_BGI_STARTED:
+ if (!sdev)
+ break;
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization Started\n");
+ break;
+ case MYRB_BGI_INPROGRESS:
+ if (!sdev)
+ break;
+ if (bgi->blocks_done == last_bgi->blocks_done &&
+ bgi->ldev_num == last_bgi->ldev_num)
+ break;
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization in Progress: %d%% completed\n",
+ (100 * (bgi->blocks_done >> 7))
+ / (bgi->ldev_size >> 7));
+ break;
+ case MYRB_BGI_SUSPENDED:
+ if (!sdev)
+ break;
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization Suspended\n");
+ break;
+ case MYRB_BGI_CANCELLED:
+ if (!sdev)
+ break;
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization Cancelled\n");
+ break;
+ }
+ memcpy(&cb->bgi_status, bgi, sizeof(struct myrb_bgi_status));
+ break;
+ case MYRB_STATUS_BGI_SUCCESS:
+ if (sdev && cb->bgi_status.status == MYRB_BGI_INPROGRESS)
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization Completed Successfully\n");
+ cb->bgi_status.status = MYRB_BGI_INVALID;
+ break;
+ case MYRB_STATUS_BGI_ABORTED:
+ if (sdev && cb->bgi_status.status == MYRB_BGI_INPROGRESS)
+ sdev_printk(KERN_INFO, sdev,
+ "Background Initialization Aborted\n");
+ /* Fallthrough */
+ case MYRB_STATUS_NO_BGI_INPROGRESS:
+ cb->bgi_status.status = MYRB_BGI_INVALID;
+ break;
+ }
+ if (sdev)
+ scsi_device_put(sdev);
+ dma_free_coherent(&cb->pdev->dev, sizeof(struct myrb_bgi_status),
+ bgi, bgi_addr);
+}
+
+/**
+ * myrb_hba_enquiry - updates the controller status
+ *
+ * Executes a DAC_V1_Enquiry command and updates the controller status.
+ *
+ * Return: command status
+ */
+static unsigned short myrb_hba_enquiry(struct myrb_hba *cb)
+{
+ struct myrb_enquiry old, *new;
+ unsigned short status;
+
+ memcpy(&old, cb->enquiry, sizeof(struct myrb_enquiry));
+
+ status = myrb_exec_type3(cb, MYRB_CMD_ENQUIRY, cb->enquiry_addr);
+ if (status != MYRB_STATUS_SUCCESS)
+ return status;
+
+ new = cb->enquiry;
+ if (new->ldev_count > old.ldev_count) {
+ int ldev_num = old.ldev_count - 1;
+
+ while (++ldev_num < new->ldev_count)
+ shost_printk(KERN_CRIT, cb->host,
+ "Logical Drive %d Now Exists\n",
+ ldev_num);
+ }
+ if (new->ldev_count < old.ldev_count) {
+ int ldev_num = new->ldev_count - 1;
+
+ while (++ldev_num < old.ldev_count)
+ shost_printk(KERN_CRIT, cb->host,
+ "Logical Drive %d No Longer Exists\n",
+ ldev_num);
+ }
+ if (new->status.deferred != old.status.deferred)
+ shost_printk(KERN_CRIT, cb->host,
+ "Deferred Write Error Flag is now %s\n",
+ (new->status.deferred ? "TRUE" : "FALSE"));
+ if (new->ev_seq != old.ev_seq) {
+ cb->new_ev_seq = new->ev_seq;
+ cb->need_err_info = true;
+ shost_printk(KERN_INFO, cb->host,
+ "Event log %d/%d (%d/%d) available\n",
+ cb->old_ev_seq, cb->new_ev_seq,
+ old.ev_seq, new->ev_seq);
+ }
+ if ((new->ldev_critical > 0 &&
+ new->ldev_critical != old.ldev_critical) ||
+ (new->ldev_offline > 0 &&
+ new->ldev_offline != old.ldev_offline) ||
+ (new->ldev_count != old.ldev_count)) {
+ shost_printk(KERN_INFO, cb->host,
+ "Logical drive count changed (%d/%d/%d)\n",
+ new->ldev_critical,
+ new->ldev_offline,
+ new->ldev_count);
+ cb->need_ldev_info = true;
+ }
+ if (new->pdev_dead > 0 ||
+ new->pdev_dead != old.pdev_dead ||
+ time_after_eq(jiffies, cb->secondary_monitor_time
+ + MYRB_SECONDARY_MONITOR_INTERVAL)) {
+ cb->need_bgi_status = cb->bgi_status_supported;
+ cb->secondary_monitor_time = jiffies;
+ }
+ if (new->rbld == MYRB_STDBY_RBLD_IN_PROGRESS ||
+ new->rbld == MYRB_BG_RBLD_IN_PROGRESS ||
+ old.rbld == MYRB_STDBY_RBLD_IN_PROGRESS ||
+ old.rbld == MYRB_BG_RBLD_IN_PROGRESS) {
+ cb->need_rbld = true;
+ cb->rbld_first = (new->ldev_critical < old.ldev_critical);
+ }
+ if (old.rbld == MYRB_BG_CHECK_IN_PROGRESS)
+ switch (new->rbld) {
+ case MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Completed Successfully\n");
+ break;
+ case MYRB_STDBY_RBLD_IN_PROGRESS:
+ case MYRB_BG_RBLD_IN_PROGRESS:
+ break;
+ case MYRB_BG_CHECK_IN_PROGRESS:
+ cb->need_cc_status = true;
+ break;
+ case MYRB_STDBY_RBLD_COMPLETED_WITH_ERROR:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Completed with Error\n");
+ break;
+ case MYRB_BG_RBLD_OR_CHECK_FAILED_DRIVE_FAILED:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Failed - Physical Device Failed\n");
+ break;
+ case MYRB_BG_RBLD_OR_CHECK_FAILED_LDEV_FAILED:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Failed - Logical Drive Failed\n");
+ break;
+ case MYRB_BG_RBLD_OR_CHECK_FAILED_OTHER:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Failed - Other Causes\n");
+ break;
+ case MYRB_BG_RBLD_OR_CHECK_SUCCESS_TERMINATED:
+ shost_printk(KERN_INFO, cb->host,
+ "Consistency Check Successfully Terminated\n");
+ break;
+ }
+ else if (new->rbld == MYRB_BG_CHECK_IN_PROGRESS)
+ cb->need_cc_status = true;
+
+ return MYRB_STATUS_SUCCESS;
+}
+
+/**
+ * myrb_set_pdev_state - sets the device state for a physical device
+ *
+ * Return: command status
+ */
+static unsigned short myrb_set_pdev_state(struct myrb_hba *cb,
+ struct scsi_device *sdev, enum myrb_devstate state)
+{
+ struct myrb_cmdblk *cmd_blk = &cb->dcmd_blk;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ unsigned short status;
+
+ mutex_lock(&cb->dcmd_mutex);
+ mbox->type3D.opcode = MYRB_CMD_START_DEVICE;
+ mbox->type3D.id = MYRB_DCMD_TAG;
+ mbox->type3D.channel = sdev->channel;
+ mbox->type3D.target = sdev->id;
+ mbox->type3D.state = state & 0x1F;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ mutex_unlock(&cb->dcmd_mutex);
+
+ return status;
+}
+
+/**
+ * myrb_enable_mmio - enables the Memory Mailbox Interface
+ *
+ * PD and P controller types have no memory mailbox, but still need the
+ * other dma mapped memory.
+ *
+ * Return: true on success, false otherwise.
+ */
+static bool myrb_enable_mmio(struct myrb_hba *cb, mbox_mmio_init_t mmio_init_fn)
+{
+ void __iomem *base = cb->io_base;
+ struct pci_dev *pdev = cb->pdev;
+ size_t err_table_size;
+ size_t ldev_info_size;
+ union myrb_cmd_mbox *cmd_mbox_mem;
+ struct myrb_stat_mbox *stat_mbox_mem;
+ union myrb_cmd_mbox mbox;
+ unsigned short status;
+
+ memset(&mbox, 0, sizeof(union myrb_cmd_mbox));
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_err(&pdev->dev, "DMA mask out of range\n");
+ return false;
+ }
+
+ cb->enquiry = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct myrb_enquiry),
+ &cb->enquiry_addr, GFP_KERNEL);
+ if (!cb->enquiry)
+ return false;
+
+ err_table_size = sizeof(struct myrb_error_entry) *
+ MYRB_MAX_CHANNELS * MYRB_MAX_TARGETS;
+ cb->err_table = dma_alloc_coherent(&pdev->dev, err_table_size,
+ &cb->err_table_addr, GFP_KERNEL);
+ if (!cb->err_table)
+ return false;
+
+ ldev_info_size = sizeof(struct myrb_ldev_info) * MYRB_MAX_LDEVS;
+ cb->ldev_info_buf = dma_alloc_coherent(&pdev->dev, ldev_info_size,
+ &cb->ldev_info_addr, GFP_KERNEL);
+ if (!cb->ldev_info_buf)
+ return false;
+
+ /*
+ * Skip mailbox initialisation for PD and P Controllers
+ */
+ if (!mmio_init_fn)
+ return true;
+
+ /* These are the base addresses for the command memory mailbox array */
+ cb->cmd_mbox_size = MYRB_CMD_MBOX_COUNT * sizeof(union myrb_cmd_mbox);
+ cb->first_cmd_mbox = dma_alloc_coherent(&pdev->dev,
+ cb->cmd_mbox_size,
+ &cb->cmd_mbox_addr,
+ GFP_KERNEL);
+ if (!cb->first_cmd_mbox)
+ return false;
+
+ cmd_mbox_mem = cb->first_cmd_mbox;
+ cmd_mbox_mem += MYRB_CMD_MBOX_COUNT - 1;
+ cb->last_cmd_mbox = cmd_mbox_mem;
+ cb->next_cmd_mbox = cb->first_cmd_mbox;
+ cb->prev_cmd_mbox1 = cb->last_cmd_mbox;
+ cb->prev_cmd_mbox2 = cb->last_cmd_mbox - 1;
+
+ /* These are the base addresses for the status memory mailbox array */
+ cb->stat_mbox_size = MYRB_STAT_MBOX_COUNT *
+ sizeof(struct myrb_stat_mbox);
+ cb->first_stat_mbox = dma_alloc_coherent(&pdev->dev,
+ cb->stat_mbox_size,
+ &cb->stat_mbox_addr,
+ GFP_KERNEL);
+ if (!cb->first_stat_mbox)
+ return false;
+
+ stat_mbox_mem = cb->first_stat_mbox;
+ stat_mbox_mem += MYRB_STAT_MBOX_COUNT - 1;
+ cb->last_stat_mbox = stat_mbox_mem;
+ cb->next_stat_mbox = cb->first_stat_mbox;
+
+ /* Enable the Memory Mailbox Interface. */
+ cb->dual_mode_interface = true;
+ mbox.typeX.opcode = 0x2B;
+ mbox.typeX.id = 0;
+ mbox.typeX.opcode2 = 0x14;
+ mbox.typeX.cmd_mbox_addr = cb->cmd_mbox_addr;
+ mbox.typeX.stat_mbox_addr = cb->stat_mbox_addr;
+
+ status = mmio_init_fn(pdev, base, &mbox);
+ if (status != MYRB_STATUS_SUCCESS) {
+ cb->dual_mode_interface = false;
+ mbox.typeX.opcode2 = 0x10;
+ status = mmio_init_fn(pdev, base, &mbox);
+ if (status != MYRB_STATUS_SUCCESS) {
+ dev_err(&pdev->dev,
+ "Failed to enable mailbox, statux %02X\n",
+ status);
+ return false;
+ }
+ }
+ return true;
+}
+
+/**
+ * myrb_get_hba_config - reads the configuration information
+ *
+ * Reads the configuration information from the controller and
+ * initializes the controller structure.
+ *
+ * Return: 0 on success, errno otherwise
+ */
+static int myrb_get_hba_config(struct myrb_hba *cb)
+{
+ struct myrb_enquiry2 *enquiry2;
+ dma_addr_t enquiry2_addr;
+ struct myrb_config2 *config2;
+ dma_addr_t config2_addr;
+ struct Scsi_Host *shost = cb->host;
+ struct pci_dev *pdev = cb->pdev;
+ int pchan_max = 0, pchan_cur = 0;
+ unsigned short status;
+ int ret = -ENODEV, memsize = 0;
+
+ enquiry2 = dma_alloc_coherent(&pdev->dev, sizeof(struct myrb_enquiry2),
+ &enquiry2_addr, GFP_KERNEL);
+ if (!enquiry2) {
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to allocate V1 enquiry2 memory\n");
+ return -ENOMEM;
+ }
+ config2 = dma_alloc_coherent(&pdev->dev, sizeof(struct myrb_config2),
+ &config2_addr, GFP_KERNEL);
+ if (!config2) {
+ shost_printk(KERN_ERR, cb->host,
+ "Failed to allocate V1 config2 memory\n");
+ dma_free_coherent(&pdev->dev, sizeof(struct myrb_enquiry2),
+ enquiry2, enquiry2_addr);
+ return -ENOMEM;
+ }
+ mutex_lock(&cb->dma_mutex);
+ status = myrb_hba_enquiry(cb);
+ mutex_unlock(&cb->dma_mutex);
+ if (status != MYRB_STATUS_SUCCESS) {
+ shost_printk(KERN_WARNING, cb->host,
+ "Failed it issue V1 Enquiry\n");
+ goto out_free;
+ }
+
+ status = myrb_exec_type3(cb, MYRB_CMD_ENQUIRY2, enquiry2_addr);
+ if (status != MYRB_STATUS_SUCCESS) {
+ shost_printk(KERN_WARNING, cb->host,
+ "Failed to issue V1 Enquiry2\n");
+ goto out_free;
+ }
+
+ status = myrb_exec_type3(cb, MYRB_CMD_READ_CONFIG2, config2_addr);
+ if (status != MYRB_STATUS_SUCCESS) {
+ shost_printk(KERN_WARNING, cb->host,
+ "Failed to issue ReadConfig2\n");
+ goto out_free;
+ }
+
+ status = myrb_get_ldev_info(cb);
+ if (status != MYRB_STATUS_SUCCESS) {
+ shost_printk(KERN_WARNING, cb->host,
+ "Failed to get logical drive information\n");
+ goto out_free;
+ }
+
+ /*
+ * Initialize the Controller Model Name and Full Model Name fields.
+ */
+ switch (enquiry2->hw.sub_model) {
+ case DAC960_V1_P_PD_PU:
+ if (enquiry2->scsi_cap.bus_speed == MYRB_SCSI_SPEED_ULTRA)
+ strcpy(cb->model_name, "DAC960PU");
+ else
+ strcpy(cb->model_name, "DAC960PD");
+ break;
+ case DAC960_V1_PL:
+ strcpy(cb->model_name, "DAC960PL");
+ break;
+ case DAC960_V1_PG:
+ strcpy(cb->model_name, "DAC960PG");
+ break;
+ case DAC960_V1_PJ:
+ strcpy(cb->model_name, "DAC960PJ");
+ break;
+ case DAC960_V1_PR:
+ strcpy(cb->model_name, "DAC960PR");
+ break;
+ case DAC960_V1_PT:
+ strcpy(cb->model_name, "DAC960PT");
+ break;
+ case DAC960_V1_PTL0:
+ strcpy(cb->model_name, "DAC960PTL0");
+ break;
+ case DAC960_V1_PRL:
+ strcpy(cb->model_name, "DAC960PRL");
+ break;
+ case DAC960_V1_PTL1:
+ strcpy(cb->model_name, "DAC960PTL1");
+ break;
+ case DAC960_V1_1164P:
+ strcpy(cb->model_name, "eXtremeRAID 1100");
+ break;
+ default:
+ shost_printk(KERN_WARNING, cb->host,
+ "Unknown Model %X\n",
+ enquiry2->hw.sub_model);
+ goto out;
+ }
+ /*
+ * Initialize the Controller Firmware Version field and verify that it
+ * is a supported firmware version.
+ * The supported firmware versions are:
+ *
+ * DAC1164P 5.06 and above
+ * DAC960PTL/PRL/PJ/PG 4.06 and above
+ * DAC960PU/PD/PL 3.51 and above
+ * DAC960PU/PD/PL/P 2.73 and above
+ */
+#if defined(CONFIG_ALPHA)
+ /*
+ * DEC Alpha machines were often equipped with DAC960 cards that were
+ * OEMed from Mylex, and had their own custom firmware. Version 2.70,
+ * the last custom FW revision to be released by DEC for these older
+ * controllers, appears to work quite well with this driver.
+ *
+ * Cards tested successfully were several versions each of the PD and
+ * PU, called by DEC the KZPSC and KZPAC, respectively, and having
+ * the Manufacturer Numbers (from Mylex), usually on a sticker on the
+ * back of the board, of:
+ *
+ * KZPSC: D040347 (1-channel) or D040348 (2-channel)
+ * or D040349 (3-channel)
+ * KZPAC: D040395 (1-channel) or D040396 (2-channel)
+ * or D040397 (3-channel)
+ */
+# define FIRMWARE_27X "2.70"
+#else
+# define FIRMWARE_27X "2.73"
+#endif
+
+ if (enquiry2->fw.major_version == 0) {
+ enquiry2->fw.major_version = cb->enquiry->fw_major_version;
+ enquiry2->fw.minor_version = cb->enquiry->fw_minor_version;
+ enquiry2->fw.firmware_type = '0';
+ enquiry2->fw.turn_id = 0;
+ }
+ sprintf(cb->fw_version, "%d.%02d-%c-%02d",
+ enquiry2->fw.major_version,
+ enquiry2->fw.minor_version,
+ enquiry2->fw.firmware_type,
+ enquiry2->fw.turn_id);
+ if (!((enquiry2->fw.major_version == 5 &&
+ enquiry2->fw.minor_version >= 6) ||
+ (enquiry2->fw.major_version == 4 &&
+ enquiry2->fw.minor_version >= 6) ||
+ (enquiry2->fw.major_version == 3 &&
+ enquiry2->fw.minor_version >= 51) ||
+ (enquiry2->fw.major_version == 2 &&
+ strcmp(cb->fw_version, FIRMWARE_27X) >= 0))) {
+ shost_printk(KERN_WARNING, cb->host,
+ "Firmware Version '%s' unsupported\n",
+ cb->fw_version);
+ goto out;
+ }
+ /*
+ * Initialize the Channels, Targets, Memory Size, and SAF-TE
+ * Enclosure Management Enabled fields.
+ */
+ switch (enquiry2->hw.model) {
+ case MYRB_5_CHANNEL_BOARD:
+ pchan_max = 5;
+ break;
+ case MYRB_3_CHANNEL_BOARD:
+ case MYRB_3_CHANNEL_ASIC_DAC:
+ pchan_max = 3;
+ break;
+ case MYRB_2_CHANNEL_BOARD:
+ pchan_max = 2;
+ break;
+ default:
+ pchan_max = enquiry2->cfg_chan;
+ break;
+ }
+ pchan_cur = enquiry2->cur_chan;
+ if (enquiry2->scsi_cap.bus_width == MYRB_WIDTH_WIDE_32BIT)
+ cb->bus_width = 32;
+ else if (enquiry2->scsi_cap.bus_width == MYRB_WIDTH_WIDE_16BIT)
+ cb->bus_width = 16;
+ else
+ cb->bus_width = 8;
+ cb->ldev_block_size = enquiry2->ldev_block_size;
+ shost->max_channel = pchan_cur;
+ shost->max_id = enquiry2->max_targets;
+ memsize = enquiry2->mem_size >> 20;
+ cb->safte_enabled = (enquiry2->fault_mgmt == MYRB_FAULT_SAFTE);
+ /*
+ * Initialize the Controller Queue Depth, Driver Queue Depth,
+ * Logical Drive Count, Maximum Blocks per Command, Controller
+ * Scatter/Gather Limit, and Driver Scatter/Gather Limit.
+ * The Driver Queue Depth must be at most one less than the
+ * Controller Queue Depth to allow for an automatic drive
+ * rebuild operation.
+ */
+ shost->can_queue = cb->enquiry->max_tcq;
+ if (shost->can_queue < 3)
+ shost->can_queue = enquiry2->max_cmds;
+ if (shost->can_queue < 3)
+ /* Play safe and disable TCQ */
+ shost->can_queue = 1;
+
+ if (shost->can_queue > MYRB_CMD_MBOX_COUNT - 2)
+ shost->can_queue = MYRB_CMD_MBOX_COUNT - 2;
+ shost->max_sectors = enquiry2->max_sectors;
+ shost->sg_tablesize = enquiry2->max_sge;
+ if (shost->sg_tablesize > MYRB_SCATTER_GATHER_LIMIT)
+ shost->sg_tablesize = MYRB_SCATTER_GATHER_LIMIT;
+ /*
+ * Initialize the Stripe Size, Segment Size, and Geometry Translation.
+ */
+ cb->stripe_size = config2->blocks_per_stripe * config2->block_factor
+ >> (10 - MYRB_BLKSIZE_BITS);
+ cb->segment_size = config2->blocks_per_cacheline * config2->block_factor
+ >> (10 - MYRB_BLKSIZE_BITS);
+ /* Assume 255/63 translation */
+ cb->ldev_geom_heads = 255;
+ cb->ldev_geom_sectors = 63;
+ if (config2->drive_geometry) {
+ cb->ldev_geom_heads = 128;
+ cb->ldev_geom_sectors = 32;
+ }
+
+ /*
+ * Initialize the Background Initialization Status.
+ */
+ if ((cb->fw_version[0] == '4' &&
+ strcmp(cb->fw_version, "4.08") >= 0) ||
+ (cb->fw_version[0] == '5' &&
+ strcmp(cb->fw_version, "5.08") >= 0)) {
+ cb->bgi_status_supported = true;
+ myrb_bgi_control(cb);
+ }
+ cb->last_rbld_status = MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS;
+ ret = 0;
+
+out:
+ shost_printk(KERN_INFO, cb->host,
+ "Configuring %s PCI RAID Controller\n", cb->model_name);
+ shost_printk(KERN_INFO, cb->host,
+ " Firmware Version: %s, Memory Size: %dMB\n",
+ cb->fw_version, memsize);
+ if (cb->io_addr == 0)
+ shost_printk(KERN_INFO, cb->host,
+ " I/O Address: n/a, PCI Address: 0x%lX, IRQ Channel: %d\n",
+ (unsigned long)cb->pci_addr, cb->irq);
+ else
+ shost_printk(KERN_INFO, cb->host,
+ " I/O Address: 0x%lX, PCI Address: 0x%lX, IRQ Channel: %d\n",
+ (unsigned long)cb->io_addr, (unsigned long)cb->pci_addr,
+ cb->irq);
+ shost_printk(KERN_INFO, cb->host,
+ " Controller Queue Depth: %d, Maximum Blocks per Command: %d\n",
+ cb->host->can_queue, cb->host->max_sectors);
+ shost_printk(KERN_INFO, cb->host,
+ " Driver Queue Depth: %d, Scatter/Gather Limit: %d of %d Segments\n",
+ cb->host->can_queue, cb->host->sg_tablesize,
+ MYRB_SCATTER_GATHER_LIMIT);
+ shost_printk(KERN_INFO, cb->host,
+ " Stripe Size: %dKB, Segment Size: %dKB, BIOS Geometry: %d/%d%s\n",
+ cb->stripe_size, cb->segment_size,
+ cb->ldev_geom_heads, cb->ldev_geom_sectors,
+ cb->safte_enabled ?
+ " SAF-TE Enclosure Management Enabled" : "");
+ shost_printk(KERN_INFO, cb->host,
+ " Physical: %d/%d channels %d/%d/%d devices\n",
+ pchan_cur, pchan_max, 0, cb->enquiry->pdev_dead,
+ cb->host->max_id);
+
+ shost_printk(KERN_INFO, cb->host,
+ " Logical: 1/1 channels, %d/%d disks\n",
+ cb->enquiry->ldev_count, MYRB_MAX_LDEVS);
+
+out_free:
+ dma_free_coherent(&pdev->dev, sizeof(struct myrb_enquiry2),
+ enquiry2, enquiry2_addr);
+ dma_free_coherent(&pdev->dev, sizeof(struct myrb_config2),
+ config2, config2_addr);
+
+ return ret;
+}
+
+/**
+ * myrb_unmap - unmaps controller structures
+ */
+static void myrb_unmap(struct myrb_hba *cb)
+{
+ if (cb->ldev_info_buf) {
+ size_t ldev_info_size = sizeof(struct myrb_ldev_info) *
+ MYRB_MAX_LDEVS;
+ dma_free_coherent(&cb->pdev->dev, ldev_info_size,
+ cb->ldev_info_buf, cb->ldev_info_addr);
+ cb->ldev_info_buf = NULL;
+ }
+ if (cb->err_table) {
+ size_t err_table_size = sizeof(struct myrb_error_entry) *
+ MYRB_MAX_CHANNELS * MYRB_MAX_TARGETS;
+ dma_free_coherent(&cb->pdev->dev, err_table_size,
+ cb->err_table, cb->err_table_addr);
+ cb->err_table = NULL;
+ }
+ if (cb->enquiry) {
+ dma_free_coherent(&cb->pdev->dev, sizeof(struct myrb_enquiry),
+ cb->enquiry, cb->enquiry_addr);
+ cb->enquiry = NULL;
+ }
+ if (cb->first_stat_mbox) {
+ dma_free_coherent(&cb->pdev->dev, cb->stat_mbox_size,
+ cb->first_stat_mbox, cb->stat_mbox_addr);
+ cb->first_stat_mbox = NULL;
+ }
+ if (cb->first_cmd_mbox) {
+ dma_free_coherent(&cb->pdev->dev, cb->cmd_mbox_size,
+ cb->first_cmd_mbox, cb->cmd_mbox_addr);
+ cb->first_cmd_mbox = NULL;
+ }
+}
+
+/**
+ * myrb_cleanup - cleanup controller structures
+ */
+static void myrb_cleanup(struct myrb_hba *cb)
+{
+ struct pci_dev *pdev = cb->pdev;
+
+ /* Free the memory mailbox, status, and related structures */
+ myrb_unmap(cb);
+
+ if (cb->mmio_base) {
+ cb->disable_intr(cb->io_base);
+ iounmap(cb->mmio_base);
+ }
+ if (cb->irq)
+ free_irq(cb->irq, cb);
+ if (cb->io_addr)
+ release_region(cb->io_addr, 0x80);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ scsi_host_put(cb->host);
+}
+
+static int myrb_host_reset(struct scsi_cmnd *scmd)
+{
+ struct Scsi_Host *shost = scmd->device->host;
+ struct myrb_hba *cb = shost_priv(shost);
+
+ cb->reset(cb->io_base);
+ return SUCCESS;
+}
+
+static int myrb_pthru_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ struct myrb_hba *cb = shost_priv(shost);
+ struct myrb_cmdblk *cmd_blk = scsi_cmd_priv(scmd);
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_dcdb *dcdb;
+ dma_addr_t dcdb_addr;
+ struct scsi_device *sdev = scmd->device;
+ struct scatterlist *sgl;
+ unsigned long flags;
+ int nsge;
+
+ myrb_reset_cmd(cmd_blk);
+ dcdb = dma_pool_alloc(cb->dcdb_pool, GFP_ATOMIC, &dcdb_addr);
+ if (!dcdb)
+ return SCSI_MLQUEUE_HOST_BUSY;
+ nsge = scsi_dma_map(scmd);
+ if (nsge > 1) {
+ dma_pool_free(cb->dcdb_pool, dcdb, dcdb_addr);
+ scmd->result = (DID_ERROR << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
+ mbox->type3.opcode = MYRB_CMD_DCDB;
+ mbox->type3.id = scmd->request->tag + 3;
+ mbox->type3.addr = dcdb_addr;
+ dcdb->channel = sdev->channel;
+ dcdb->target = sdev->id;
+ switch (scmd->sc_data_direction) {
+ case DMA_NONE:
+ dcdb->data_xfer = MYRB_DCDB_XFER_NONE;
+ break;
+ case DMA_TO_DEVICE:
+ dcdb->data_xfer = MYRB_DCDB_XFER_SYSTEM_TO_DEVICE;
+ break;
+ case DMA_FROM_DEVICE:
+ dcdb->data_xfer = MYRB_DCDB_XFER_DEVICE_TO_SYSTEM;
+ break;
+ default:
+ dcdb->data_xfer = MYRB_DCDB_XFER_ILLEGAL;
+ break;
+ }
+ dcdb->early_status = false;
+ if (scmd->request->timeout <= 10)
+ dcdb->timeout = MYRB_DCDB_TMO_10_SECS;
+ else if (scmd->request->timeout <= 60)
+ dcdb->timeout = MYRB_DCDB_TMO_60_SECS;
+ else if (scmd->request->timeout <= 600)
+ dcdb->timeout = MYRB_DCDB_TMO_10_MINS;
+ else
+ dcdb->timeout = MYRB_DCDB_TMO_24_HRS;
+ dcdb->no_autosense = false;
+ dcdb->allow_disconnect = true;
+ sgl = scsi_sglist(scmd);
+ dcdb->dma_addr = sg_dma_address(sgl);
+ if (sg_dma_len(sgl) > USHRT_MAX) {
+ dcdb->xfer_len_lo = sg_dma_len(sgl) & 0xffff;
+ dcdb->xfer_len_hi4 = sg_dma_len(sgl) >> 16;
+ } else {
+ dcdb->xfer_len_lo = sg_dma_len(sgl);
+ dcdb->xfer_len_hi4 = 0;
+ }
+ dcdb->cdb_len = scmd->cmd_len;
+ dcdb->sense_len = sizeof(dcdb->sense);
+ memcpy(&dcdb->cdb, scmd->cmnd, scmd->cmd_len);
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ cb->qcmd(cb, cmd_blk);
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+ return 0;
+}
+
+static void myrb_inquiry(struct myrb_hba *cb,
+ struct scsi_cmnd *scmd)
+{
+ unsigned char inq[36] = {
+ 0x00, 0x00, 0x03, 0x02, 0x20, 0x00, 0x01, 0x00,
+ 0x4d, 0x59, 0x4c, 0x45, 0x58, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20,
+ };
+
+ if (cb->bus_width > 16)
+ inq[7] |= 1 << 6;
+ if (cb->bus_width > 8)
+ inq[7] |= 1 << 5;
+ memcpy(&inq[16], cb->model_name, 16);
+ memcpy(&inq[32], cb->fw_version, 1);
+ memcpy(&inq[33], &cb->fw_version[2], 2);
+ memcpy(&inq[35], &cb->fw_version[7], 1);
+
+ scsi_sg_copy_from_buffer(scmd, (void *)inq, 36);
+}
+
+static void
+myrb_mode_sense(struct myrb_hba *cb, struct scsi_cmnd *scmd,
+ struct myrb_ldev_info *ldev_info)
+{
+ unsigned char modes[32], *mode_pg;
+ bool dbd;
+ size_t mode_len;
+
+ dbd = (scmd->cmnd[1] & 0x08) == 0x08;
+ if (dbd) {
+ mode_len = 24;
+ mode_pg = &modes[4];
+ } else {
+ mode_len = 32;
+ mode_pg = &modes[12];
+ }
+ memset(modes, 0, sizeof(modes));
+ modes[0] = mode_len - 1;
+ if (!dbd) {
+ unsigned char *block_desc = &modes[4];
+
+ modes[3] = 8;
+ put_unaligned_be32(ldev_info->size, &block_desc[0]);
+ put_unaligned_be32(cb->ldev_block_size, &block_desc[5]);
+ }
+ mode_pg[0] = 0x08;
+ mode_pg[1] = 0x12;
+ if (ldev_info->wb_enabled)
+ mode_pg[2] |= 0x04;
+ if (cb->segment_size) {
+ mode_pg[2] |= 0x08;
+ put_unaligned_be16(cb->segment_size, &mode_pg[14]);
+ }
+
+ scsi_sg_copy_from_buffer(scmd, modes, mode_len);
+}
+
+static void myrb_request_sense(struct myrb_hba *cb,
+ struct scsi_cmnd *scmd)
+{
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ NO_SENSE, 0, 0);
+ scsi_sg_copy_from_buffer(scmd, scmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE);
+}
+
+static void myrb_read_capacity(struct myrb_hba *cb, struct scsi_cmnd *scmd,
+ struct myrb_ldev_info *ldev_info)
+{
+ unsigned char data[8];
+
+ dev_dbg(&scmd->device->sdev_gendev,
+ "Capacity %u, blocksize %u\n",
+ ldev_info->size, cb->ldev_block_size);
+ put_unaligned_be32(ldev_info->size - 1, &data[0]);
+ put_unaligned_be32(cb->ldev_block_size, &data[4]);
+ scsi_sg_copy_from_buffer(scmd, data, 8);
+}
+
+static int myrb_ldev_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ struct myrb_hba *cb = shost_priv(shost);
+ struct myrb_cmdblk *cmd_blk = scsi_cmd_priv(scmd);
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct myrb_ldev_info *ldev_info;
+ struct scsi_device *sdev = scmd->device;
+ struct scatterlist *sgl;
+ unsigned long flags;
+ u64 lba;
+ u32 block_cnt;
+ int nsge;
+
+ ldev_info = sdev->hostdata;
+ if (ldev_info->state != MYRB_DEVICE_ONLINE &&
+ ldev_info->state != MYRB_DEVICE_WO) {
+ dev_dbg(&shost->shost_gendev, "ldev %u in state %x, skip\n",
+ sdev->id, ldev_info ? ldev_info->state : 0xff);
+ scmd->result = (DID_BAD_TARGET << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ switch (scmd->cmnd[0]) {
+ case TEST_UNIT_READY:
+ scmd->result = (DID_OK << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ case INQUIRY:
+ if (scmd->cmnd[1] & 1) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ } else {
+ myrb_inquiry(cb, scmd);
+ scmd->result = (DID_OK << 16);
+ }
+ scmd->scsi_done(scmd);
+ return 0;
+ case SYNCHRONIZE_CACHE:
+ scmd->result = (DID_OK << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ case MODE_SENSE:
+ if ((scmd->cmnd[2] & 0x3F) != 0x3F &&
+ (scmd->cmnd[2] & 0x3F) != 0x08) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ } else {
+ myrb_mode_sense(cb, scmd, ldev_info);
+ scmd->result = (DID_OK << 16);
+ }
+ scmd->scsi_done(scmd);
+ return 0;
+ case READ_CAPACITY:
+ if ((scmd->cmnd[1] & 1) ||
+ (scmd->cmnd[8] & 1)) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ lba = get_unaligned_be32(&scmd->cmnd[2]);
+ if (lba) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ myrb_read_capacity(cb, scmd, ldev_info);
+ scmd->scsi_done(scmd);
+ return 0;
+ case REQUEST_SENSE:
+ myrb_request_sense(cb, scmd);
+ scmd->result = (DID_OK << 16);
+ return 0;
+ case SEND_DIAGNOSTIC:
+ if (scmd->cmnd[1] != 0x04) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ } else {
+ /* Assume good status */
+ scmd->result = (DID_OK << 16);
+ }
+ scmd->scsi_done(scmd);
+ return 0;
+ case READ_6:
+ if (ldev_info->state == MYRB_DEVICE_WO) {
+ /* Data protect, attempt to read invalid data */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ DATA_PROTECT, 0x21, 0x06);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ case WRITE_6:
+ lba = (((scmd->cmnd[1] & 0x1F) << 16) |
+ (scmd->cmnd[2] << 8) |
+ scmd->cmnd[3]);
+ block_cnt = scmd->cmnd[4];
+ break;
+ case READ_10:
+ if (ldev_info->state == MYRB_DEVICE_WO) {
+ /* Data protect, attempt to read invalid data */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ DATA_PROTECT, 0x21, 0x06);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ case WRITE_10:
+ case VERIFY: /* 0x2F */
+ case WRITE_VERIFY: /* 0x2E */
+ lba = get_unaligned_be32(&scmd->cmnd[2]);
+ block_cnt = get_unaligned_be16(&scmd->cmnd[7]);
+ break;
+ case READ_12:
+ if (ldev_info->state == MYRB_DEVICE_WO) {
+ /* Data protect, attempt to read invalid data */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ DATA_PROTECT, 0x21, 0x06);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ case WRITE_12:
+ case VERIFY_12: /* 0xAF */
+ case WRITE_VERIFY_12: /* 0xAE */
+ lba = get_unaligned_be32(&scmd->cmnd[2]);
+ block_cnt = get_unaligned_be32(&scmd->cmnd[6]);
+ break;
+ default:
+ /* Illegal request, invalid opcode */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x20, 0);
+ scmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
+ myrb_reset_cmd(cmd_blk);
+ mbox->type5.id = scmd->request->tag + 3;
+ if (scmd->sc_data_direction == DMA_NONE)
+ goto submit;
+ nsge = scsi_dma_map(scmd);
+ if (nsge == 1) {
+ sgl = scsi_sglist(scmd);
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ mbox->type5.opcode = MYRB_CMD_READ;
+ else
+ mbox->type5.opcode = MYRB_CMD_WRITE;
+
+ mbox->type5.ld.xfer_len = block_cnt;
+ mbox->type5.ld.ldev_num = sdev->id;
+ mbox->type5.lba = lba;
+ mbox->type5.addr = (u32)sg_dma_address(sgl);
+ } else {
+ struct myrb_sge *hw_sgl;
+ dma_addr_t hw_sgl_addr;
+ int i;
+
+ hw_sgl = dma_pool_alloc(cb->sg_pool, GFP_ATOMIC, &hw_sgl_addr);
+ if (!hw_sgl)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ cmd_blk->sgl = hw_sgl;
+ cmd_blk->sgl_addr = hw_sgl_addr;
+
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ mbox->type5.opcode = MYRB_CMD_READ_SG;
+ else
+ mbox->type5.opcode = MYRB_CMD_WRITE_SG;
+
+ mbox->type5.ld.xfer_len = block_cnt;
+ mbox->type5.ld.ldev_num = sdev->id;
+ mbox->type5.lba = lba;
+ mbox->type5.addr = hw_sgl_addr;
+ mbox->type5.sg_count = nsge;
+
+ scsi_for_each_sg(scmd, sgl, nsge, i) {
+ hw_sgl->sge_addr = (u32)sg_dma_address(sgl);
+ hw_sgl->sge_count = (u32)sg_dma_len(sgl);
+ hw_sgl++;
+ }
+ }
+submit:
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ cb->qcmd(cb, cmd_blk);
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+
+ return 0;
+}
+
+static int myrb_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ struct scsi_device *sdev = scmd->device;
+
+ if (sdev->channel > myrb_logical_channel(shost)) {
+ scmd->result = (DID_BAD_TARGET << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ if (sdev->channel == myrb_logical_channel(shost))
+ return myrb_ldev_queuecommand(shost, scmd);
+
+ return myrb_pthru_queuecommand(shost, scmd);
+}
+
+static int myrb_ldev_slave_alloc(struct scsi_device *sdev)
+{
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_ldev_info *ldev_info;
+ unsigned short ldev_num = sdev->id;
+ enum raid_level level;
+
+ ldev_info = cb->ldev_info_buf + ldev_num;
+ if (!ldev_info)
+ return -ENXIO;
+
+ sdev->hostdata = kzalloc(sizeof(*ldev_info), GFP_KERNEL);
+ if (!sdev->hostdata)
+ return -ENOMEM;
+ dev_dbg(&sdev->sdev_gendev,
+ "slave alloc ldev %d state %x\n",
+ ldev_num, ldev_info->state);
+ memcpy(sdev->hostdata, ldev_info,
+ sizeof(*ldev_info));
+ switch (ldev_info->raid_level) {
+ case MYRB_RAID_LEVEL0:
+ level = RAID_LEVEL_LINEAR;
+ break;
+ case MYRB_RAID_LEVEL1:
+ level = RAID_LEVEL_1;
+ break;
+ case MYRB_RAID_LEVEL3:
+ level = RAID_LEVEL_3;
+ break;
+ case MYRB_RAID_LEVEL5:
+ level = RAID_LEVEL_5;
+ break;
+ case MYRB_RAID_LEVEL6:
+ level = RAID_LEVEL_6;
+ break;
+ case MYRB_RAID_JBOD:
+ level = RAID_LEVEL_JBOD;
+ break;
+ default:
+ level = RAID_LEVEL_UNKNOWN;
+ break;
+ }
+ raid_set_level(myrb_raid_template, &sdev->sdev_gendev, level);
+ return 0;
+}
+
+static int myrb_pdev_slave_alloc(struct scsi_device *sdev)
+{
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_pdev_state *pdev_info;
+ unsigned short status;
+
+ if (sdev->id > MYRB_MAX_TARGETS)
+ return -ENXIO;
+
+ pdev_info = kzalloc(sizeof(*pdev_info), GFP_KERNEL|GFP_DMA);
+ if (!pdev_info)
+ return -ENOMEM;
+
+ status = myrb_exec_type3D(cb, MYRB_CMD_GET_DEVICE_STATE,
+ sdev, pdev_info);
+ if (status != MYRB_STATUS_SUCCESS) {
+ dev_dbg(&sdev->sdev_gendev,
+ "Failed to get device state, status %x\n",
+ status);
+ kfree(pdev_info);
+ return -ENXIO;
+ }
+ if (!pdev_info->present) {
+ dev_dbg(&sdev->sdev_gendev,
+ "device not present, skip\n");
+ kfree(pdev_info);
+ return -ENXIO;
+ }
+ dev_dbg(&sdev->sdev_gendev,
+ "slave alloc pdev %d:%d state %x\n",
+ sdev->channel, sdev->id, pdev_info->state);
+ sdev->hostdata = pdev_info;
+
+ return 0;
+}
+
+static int myrb_slave_alloc(struct scsi_device *sdev)
+{
+ if (sdev->channel > myrb_logical_channel(sdev->host))
+ return -ENXIO;
+
+ if (sdev->lun > 0)
+ return -ENXIO;
+
+ if (sdev->channel == myrb_logical_channel(sdev->host))
+ return myrb_ldev_slave_alloc(sdev);
+
+ return myrb_pdev_slave_alloc(sdev);
+}
+
+static int myrb_slave_configure(struct scsi_device *sdev)
+{
+ struct myrb_ldev_info *ldev_info;
+
+ if (sdev->channel > myrb_logical_channel(sdev->host))
+ return -ENXIO;
+
+ if (sdev->channel < myrb_logical_channel(sdev->host)) {
+ sdev->no_uld_attach = 1;
+ return 0;
+ }
+ if (sdev->lun != 0)
+ return -ENXIO;
+
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ return -ENXIO;
+ if (ldev_info->state != MYRB_DEVICE_ONLINE)
+ sdev_printk(KERN_INFO, sdev,
+ "Logical drive is %s\n",
+ myrb_devstate_name(ldev_info->state));
+
+ sdev->tagged_supported = 1;
+ return 0;
+}
+
+static void myrb_slave_destroy(struct scsi_device *sdev)
+{
+ kfree(sdev->hostdata);
+}
+
+static int myrb_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ struct myrb_hba *cb = shost_priv(sdev->host);
+
+ geom[0] = cb->ldev_geom_heads;
+ geom[1] = cb->ldev_geom_sectors;
+ geom[2] = sector_div(capacity, geom[0] * geom[1]);
+
+ return 0;
+}
+
+static ssize_t raid_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ int ret;
+
+ if (!sdev->hostdata)
+ return snprintf(buf, 16, "Unknown\n");
+
+ if (sdev->channel == myrb_logical_channel(sdev->host)) {
+ struct myrb_ldev_info *ldev_info = sdev->hostdata;
+ const char *name;
+
+ name = myrb_devstate_name(ldev_info->state);
+ if (name)
+ ret = snprintf(buf, 32, "%s\n", name);
+ else
+ ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ldev_info->state);
+ } else {
+ struct myrb_pdev_state *pdev_info = sdev->hostdata;
+ unsigned short status;
+ const char *name;
+
+ status = myrb_exec_type3D(cb, MYRB_CMD_GET_DEVICE_STATE,
+ sdev, pdev_info);
+ if (status != MYRB_STATUS_SUCCESS)
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to get device state, status %x\n",
+ status);
+
+ if (!pdev_info->present)
+ name = "Removed";
+ else
+ name = myrb_devstate_name(pdev_info->state);
+ if (name)
+ ret = snprintf(buf, 32, "%s\n", name);
+ else
+ ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ pdev_info->state);
+ }
+ return ret;
+}
+
+static ssize_t raid_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_pdev_state *pdev_info;
+ enum myrb_devstate new_state;
+ unsigned short status;
+
+ if (!strncmp(buf, "kill", 4) ||
+ !strncmp(buf, "offline", 7))
+ new_state = MYRB_DEVICE_DEAD;
+ else if (!strncmp(buf, "online", 6))
+ new_state = MYRB_DEVICE_ONLINE;
+ else if (!strncmp(buf, "standby", 7))
+ new_state = MYRB_DEVICE_STANDBY;
+ else
+ return -EINVAL;
+
+ pdev_info = sdev->hostdata;
+ if (!pdev_info) {
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - no physical device information\n");
+ return -ENXIO;
+ }
+ if (!pdev_info->present) {
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - device not present\n");
+ return -ENXIO;
+ }
+
+ if (pdev_info->state == new_state)
+ return count;
+
+ status = myrb_set_pdev_state(cb, sdev, new_state);
+ switch (status) {
+ case MYRB_STATUS_SUCCESS:
+ break;
+ case MYRB_STATUS_START_DEVICE_FAILED:
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - Unable to Start Device\n");
+ count = -EAGAIN;
+ break;
+ case MYRB_STATUS_NO_DEVICE:
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - No Device at Address\n");
+ count = -ENODEV;
+ break;
+ case MYRB_STATUS_INVALID_CHANNEL_OR_TARGET:
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - Invalid Channel or Target or Modifier\n");
+ count = -EINVAL;
+ break;
+ case MYRB_STATUS_CHANNEL_BUSY:
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - Channel Busy\n");
+ count = -EBUSY;
+ break;
+ default:
+ sdev_printk(KERN_INFO, sdev,
+ "Failed - Unexpected Status %04X\n", status);
+ count = -EIO;
+ break;
+ }
+ return count;
+}
+static DEVICE_ATTR_RW(raid_state);
+
+static ssize_t raid_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ if (sdev->channel == myrb_logical_channel(sdev->host)) {
+ struct myrb_ldev_info *ldev_info = sdev->hostdata;
+ const char *name;
+
+ if (!ldev_info)
+ return -ENXIO;
+
+ name = myrb_raidlevel_name(ldev_info->raid_level);
+ if (!name)
+ return snprintf(buf, 32, "Invalid (%02X)\n",
+ ldev_info->state);
+ return snprintf(buf, 32, "%s\n", name);
+ }
+ return snprintf(buf, 32, "Physical Drive\n");
+}
+static DEVICE_ATTR_RO(raid_level);
+
+static ssize_t rebuild_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_rbld_progress rbld_buf;
+ unsigned char status;
+
+ if (sdev->channel < myrb_logical_channel(sdev->host))
+ return snprintf(buf, 32, "physical device - not rebuilding\n");
+
+ status = myrb_get_rbld_progress(cb, &rbld_buf);
+
+ if (rbld_buf.ldev_num != sdev->id ||
+ status != MYRB_STATUS_SUCCESS)
+ return snprintf(buf, 32, "not rebuilding\n");
+
+ return snprintf(buf, 32, "rebuilding block %u of %u\n",
+ rbld_buf.ldev_size - rbld_buf.blocks_left,
+ rbld_buf.ldev_size);
+}
+
+static ssize_t rebuild_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_cmdblk *cmd_blk;
+ union myrb_cmd_mbox *mbox;
+ unsigned short status;
+ int rc, start;
+ const char *msg;
+
+ rc = kstrtoint(buf, 0, &start);
+ if (rc)
+ return rc;
+
+ if (sdev->channel >= myrb_logical_channel(sdev->host))
+ return -ENXIO;
+
+ status = myrb_get_rbld_progress(cb, NULL);
+ if (start) {
+ if (status == MYRB_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not Initiated; already in progress\n");
+ return -EALREADY;
+ }
+ mutex_lock(&cb->dcmd_mutex);
+ cmd_blk = &cb->dcmd_blk;
+ myrb_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->type3D.opcode = MYRB_CMD_REBUILD_ASYNC;
+ mbox->type3D.id = MYRB_DCMD_TAG;
+ mbox->type3D.channel = sdev->channel;
+ mbox->type3D.target = sdev->id;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ mutex_unlock(&cb->dcmd_mutex);
+ } else {
+ struct pci_dev *pdev = cb->pdev;
+ unsigned char *rate;
+ dma_addr_t rate_addr;
+
+ if (status != MYRB_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not Cancelled; not in progress\n");
+ return 0;
+ }
+
+ rate = dma_alloc_coherent(&pdev->dev, sizeof(char),
+ &rate_addr, GFP_KERNEL);
+ if (rate == NULL) {
+ sdev_printk(KERN_INFO, sdev,
+ "Cancellation of Rebuild Failed - Out of Memory\n");
+ return -ENOMEM;
+ }
+ mutex_lock(&cb->dcmd_mutex);
+ cmd_blk = &cb->dcmd_blk;
+ myrb_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->type3R.opcode = MYRB_CMD_REBUILD_CONTROL;
+ mbox->type3R.id = MYRB_DCMD_TAG;
+ mbox->type3R.rbld_rate = 0xFF;
+ mbox->type3R.addr = rate_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ dma_free_coherent(&pdev->dev, sizeof(char), rate, rate_addr);
+ mutex_unlock(&cb->dcmd_mutex);
+ }
+ if (status == MYRB_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev, "Rebuild %s\n",
+ start ? "Initiated" : "Cancelled");
+ return count;
+ }
+ if (!start) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not Cancelled, status 0x%x\n",
+ status);
+ return -EIO;
+ }
+
+ switch (status) {
+ case MYRB_STATUS_ATTEMPT_TO_RBLD_ONLINE_DRIVE:
+ msg = "Attempt to Rebuild Online or Unresponsive Drive";
+ break;
+ case MYRB_STATUS_RBLD_NEW_DISK_FAILED:
+ msg = "New Disk Failed During Rebuild";
+ break;
+ case MYRB_STATUS_INVALID_ADDRESS:
+ msg = "Invalid Device Address";
+ break;
+ case MYRB_STATUS_RBLD_OR_CHECK_INPROGRESS:
+ msg = "Already in Progress";
+ break;
+ default:
+ msg = NULL;
+ break;
+ }
+ if (msg)
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Failed - %s\n", msg);
+ else
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Failed, status 0x%x\n", status);
+
+ return -EIO;
+}
+static DEVICE_ATTR_RW(rebuild);
+
+static ssize_t consistency_check_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_rbld_progress rbld_buf;
+ struct myrb_cmdblk *cmd_blk;
+ union myrb_cmd_mbox *mbox;
+ unsigned short ldev_num = 0xFFFF;
+ unsigned short status;
+ int rc, start;
+ const char *msg;
+
+ rc = kstrtoint(buf, 0, &start);
+ if (rc)
+ return rc;
+
+ if (sdev->channel < myrb_logical_channel(sdev->host))
+ return -ENXIO;
+
+ status = myrb_get_rbld_progress(cb, &rbld_buf);
+ if (start) {
+ if (status == MYRB_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Check Consistency Not Initiated; already in progress\n");
+ return -EALREADY;
+ }
+ mutex_lock(&cb->dcmd_mutex);
+ cmd_blk = &cb->dcmd_blk;
+ myrb_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->type3C.opcode = MYRB_CMD_CHECK_CONSISTENCY_ASYNC;
+ mbox->type3C.id = MYRB_DCMD_TAG;
+ mbox->type3C.ldev_num = sdev->id;
+ mbox->type3C.auto_restore = true;
+
+ status = myrb_exec_cmd(cb, cmd_blk);
+ mutex_unlock(&cb->dcmd_mutex);
+ } else {
+ struct pci_dev *pdev = cb->pdev;
+ unsigned char *rate;
+ dma_addr_t rate_addr;
+
+ if (ldev_num != sdev->id) {
+ sdev_printk(KERN_INFO, sdev,
+ "Check Consistency Not Cancelled; not in progress\n");
+ return 0;
+ }
+ rate = dma_alloc_coherent(&pdev->dev, sizeof(char),
+ &rate_addr, GFP_KERNEL);
+ if (rate == NULL) {
+ sdev_printk(KERN_INFO, sdev,
+ "Cancellation of Check Consistency Failed - Out of Memory\n");
+ return -ENOMEM;
+ }
+ mutex_lock(&cb->dcmd_mutex);
+ cmd_blk = &cb->dcmd_blk;
+ myrb_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->type3R.opcode = MYRB_CMD_REBUILD_CONTROL;
+ mbox->type3R.id = MYRB_DCMD_TAG;
+ mbox->type3R.rbld_rate = 0xFF;
+ mbox->type3R.addr = rate_addr;
+ status = myrb_exec_cmd(cb, cmd_blk);
+ dma_free_coherent(&pdev->dev, sizeof(char), rate, rate_addr);
+ mutex_unlock(&cb->dcmd_mutex);
+ }
+ if (status == MYRB_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev, "Check Consistency %s\n",
+ start ? "Initiated" : "Cancelled");
+ return count;
+ }
+ if (!start) {
+ sdev_printk(KERN_INFO, sdev,
+ "Check Consistency Not Cancelled, status 0x%x\n",
+ status);
+ return -EIO;
+ }
+
+ switch (status) {
+ case MYRB_STATUS_ATTEMPT_TO_RBLD_ONLINE_DRIVE:
+ msg = "Dependent Physical Device is DEAD";
+ break;
+ case MYRB_STATUS_RBLD_NEW_DISK_FAILED:
+ msg = "New Disk Failed During Rebuild";
+ break;
+ case MYRB_STATUS_INVALID_ADDRESS:
+ msg = "Invalid or Nonredundant Logical Drive";
+ break;
+ case MYRB_STATUS_RBLD_OR_CHECK_INPROGRESS:
+ msg = "Already in Progress";
+ break;
+ default:
+ msg = NULL;
+ break;
+ }
+ if (msg)
+ sdev_printk(KERN_INFO, sdev,
+ "Check Consistency Failed - %s\n", msg);
+ else
+ sdev_printk(KERN_INFO, sdev,
+ "Check Consistency Failed, status 0x%x\n", status);
+
+ return -EIO;
+}
+
+static ssize_t consistency_check_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return rebuild_show(dev, attr, buf);
+}
+static DEVICE_ATTR_RW(consistency_check);
+
+static ssize_t ctlr_num_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrb_hba *cb = shost_priv(shost);
+
+ return snprintf(buf, 20, "%d\n", cb->ctlr_num);
+}
+static DEVICE_ATTR_RO(ctlr_num);
+
+static ssize_t firmware_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrb_hba *cb = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", cb->fw_version);
+}
+static DEVICE_ATTR_RO(firmware);
+
+static ssize_t model_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrb_hba *cb = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", cb->model_name);
+}
+static DEVICE_ATTR_RO(model);
+
+static ssize_t flush_cache_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrb_hba *cb = shost_priv(shost);
+ unsigned short status;
+
+ status = myrb_exec_type3(cb, MYRB_CMD_FLUSH, 0);
+ if (status == MYRB_STATUS_SUCCESS) {
+ shost_printk(KERN_INFO, shost,
+ "Cache Flush Completed\n");
+ return count;
+ }
+ shost_printk(KERN_INFO, shost,
+ "Cache Flush Failed, status %x\n", status);
+ return -EIO;
+}
+static DEVICE_ATTR_WO(flush_cache);
+
+static struct device_attribute *myrb_sdev_attrs[] = {
+ &dev_attr_rebuild,
+ &dev_attr_consistency_check,
+ &dev_attr_raid_state,
+ &dev_attr_raid_level,
+ NULL,
+};
+
+static struct device_attribute *myrb_shost_attrs[] = {
+ &dev_attr_ctlr_num,
+ &dev_attr_model,
+ &dev_attr_firmware,
+ &dev_attr_flush_cache,
+ NULL,
+};
+
+struct scsi_host_template myrb_template = {
+ .module = THIS_MODULE,
+ .name = "DAC960",
+ .proc_name = "myrb",
+ .queuecommand = myrb_queuecommand,
+ .eh_host_reset_handler = myrb_host_reset,
+ .slave_alloc = myrb_slave_alloc,
+ .slave_configure = myrb_slave_configure,
+ .slave_destroy = myrb_slave_destroy,
+ .bios_param = myrb_biosparam,
+ .cmd_size = sizeof(struct myrb_cmdblk),
+ .shost_attrs = myrb_shost_attrs,
+ .sdev_attrs = myrb_sdev_attrs,
+ .this_id = -1,
+};
+
+/**
+ * myrb_is_raid - return boolean indicating device is raid volume
+ * @dev the device struct object
+ */
+static int myrb_is_raid(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return sdev->channel == myrb_logical_channel(sdev->host);
+}
+
+/**
+ * myrb_get_resync - get raid volume resync percent complete
+ * @dev the device struct object
+ */
+static void myrb_get_resync(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_rbld_progress rbld_buf;
+ unsigned int percent_complete = 0;
+ unsigned short status;
+ unsigned int ldev_size = 0, remaining = 0;
+
+ if (sdev->channel < myrb_logical_channel(sdev->host))
+ return;
+ status = myrb_get_rbld_progress(cb, &rbld_buf);
+ if (status == MYRB_STATUS_SUCCESS) {
+ if (rbld_buf.ldev_num == sdev->id) {
+ ldev_size = rbld_buf.ldev_size;
+ remaining = rbld_buf.blocks_left;
+ }
+ }
+ if (remaining && ldev_size)
+ percent_complete = (ldev_size - remaining) * 100 / ldev_size;
+ raid_set_resync(myrb_raid_template, dev, percent_complete);
+}
+
+/**
+ * myrb_get_state - get raid volume status
+ * @dev the device struct object
+ */
+static void myrb_get_state(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrb_hba *cb = shost_priv(sdev->host);
+ struct myrb_ldev_info *ldev_info = sdev->hostdata;
+ enum raid_state state = RAID_STATE_UNKNOWN;
+ unsigned short status;
+
+ if (sdev->channel < myrb_logical_channel(sdev->host) || !ldev_info)
+ state = RAID_STATE_UNKNOWN;
+ else {
+ status = myrb_get_rbld_progress(cb, NULL);
+ if (status == MYRB_STATUS_SUCCESS)
+ state = RAID_STATE_RESYNCING;
+ else {
+ switch (ldev_info->state) {
+ case MYRB_DEVICE_ONLINE:
+ state = RAID_STATE_ACTIVE;
+ break;
+ case MYRB_DEVICE_WO:
+ case MYRB_DEVICE_CRITICAL:
+ state = RAID_STATE_DEGRADED;
+ break;
+ default:
+ state = RAID_STATE_OFFLINE;
+ }
+ }
+ }
+ raid_set_state(myrb_raid_template, dev, state);
+}
+
+struct raid_function_template myrb_raid_functions = {
+ .cookie = &myrb_template,
+ .is_raid = myrb_is_raid,
+ .get_resync = myrb_get_resync,
+ .get_state = myrb_get_state,
+};
+
+static void myrb_handle_scsi(struct myrb_hba *cb, struct myrb_cmdblk *cmd_blk,
+ struct scsi_cmnd *scmd)
+{
+ unsigned short status;
+
+ if (!cmd_blk)
+ return;
+
+ scsi_dma_unmap(scmd);
+
+ if (cmd_blk->dcdb) {
+ memcpy(scmd->sense_buffer, &cmd_blk->dcdb->sense, 64);
+ dma_pool_free(cb->dcdb_pool, cmd_blk->dcdb,
+ cmd_blk->dcdb_addr);
+ cmd_blk->dcdb = NULL;
+ }
+ if (cmd_blk->sgl) {
+ dma_pool_free(cb->sg_pool, cmd_blk->sgl, cmd_blk->sgl_addr);
+ cmd_blk->sgl = NULL;
+ cmd_blk->sgl_addr = 0;
+ }
+ status = cmd_blk->status;
+ switch (status) {
+ case MYRB_STATUS_SUCCESS:
+ case MYRB_STATUS_DEVICE_BUSY:
+ scmd->result = (DID_OK << 16) | status;
+ break;
+ case MYRB_STATUS_BAD_DATA:
+ dev_dbg(&scmd->device->sdev_gendev,
+ "Bad Data Encountered\n");
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ /* Unrecovered read error */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ MEDIUM_ERROR, 0x11, 0);
+ else
+ /* Write error */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ MEDIUM_ERROR, 0x0C, 0);
+ scmd->result = (DID_OK << 16) | SAM_STAT_CHECK_CONDITION;
+ break;
+ case MYRB_STATUS_IRRECOVERABLE_DATA_ERROR:
+ scmd_printk(KERN_ERR, scmd, "Irrecoverable Data Error\n");
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ /* Unrecovered read error, auto-reallocation failed */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ MEDIUM_ERROR, 0x11, 0x04);
+ else
+ /* Write error, auto-reallocation failed */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ MEDIUM_ERROR, 0x0C, 0x02);
+ scmd->result = (DID_OK << 16) | SAM_STAT_CHECK_CONDITION;
+ break;
+ case MYRB_STATUS_LDRV_NONEXISTENT_OR_OFFLINE:
+ dev_dbg(&scmd->device->sdev_gendev,
+ "Logical Drive Nonexistent or Offline");
+ scmd->result = (DID_BAD_TARGET << 16);
+ break;
+ case MYRB_STATUS_ACCESS_BEYOND_END_OF_LDRV:
+ dev_dbg(&scmd->device->sdev_gendev,
+ "Attempt to Access Beyond End of Logical Drive");
+ /* Logical block address out of range */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ NOT_READY, 0x21, 0);
+ break;
+ case MYRB_STATUS_DEVICE_NONRESPONSIVE:
+ dev_dbg(&scmd->device->sdev_gendev, "Device nonresponsive\n");
+ scmd->result = (DID_BAD_TARGET << 16);
+ break;
+ default:
+ scmd_printk(KERN_ERR, scmd,
+ "Unexpected Error Status %04X", status);
+ scmd->result = (DID_ERROR << 16);
+ break;
+ }
+ scmd->scsi_done(scmd);
+}
+
+static void myrb_handle_cmdblk(struct myrb_hba *cb, struct myrb_cmdblk *cmd_blk)
+{
+ if (!cmd_blk)
+ return;
+
+ if (cmd_blk->completion) {
+ complete(cmd_blk->completion);
+ cmd_blk->completion = NULL;
+ }
+}
+
+static void myrb_monitor(struct work_struct *work)
+{
+ struct myrb_hba *cb = container_of(work,
+ struct myrb_hba, monitor_work.work);
+ struct Scsi_Host *shost = cb->host;
+ unsigned long interval = MYRB_PRIMARY_MONITOR_INTERVAL;
+
+ dev_dbg(&shost->shost_gendev, "monitor tick\n");
+
+ if (cb->new_ev_seq > cb->old_ev_seq) {
+ int event = cb->old_ev_seq;
+
+ dev_dbg(&shost->shost_gendev,
+ "get event log no %d/%d\n",
+ cb->new_ev_seq, event);
+ myrb_get_event(cb, event);
+ cb->old_ev_seq = event + 1;
+ interval = 10;
+ } else if (cb->need_err_info) {
+ cb->need_err_info = false;
+ dev_dbg(&shost->shost_gendev, "get error table\n");
+ myrb_get_errtable(cb);
+ interval = 10;
+ } else if (cb->need_rbld && cb->rbld_first) {
+ cb->need_rbld = false;
+ dev_dbg(&shost->shost_gendev,
+ "get rebuild progress\n");
+ myrb_update_rbld_progress(cb);
+ interval = 10;
+ } else if (cb->need_ldev_info) {
+ cb->need_ldev_info = false;
+ dev_dbg(&shost->shost_gendev,
+ "get logical drive info\n");
+ myrb_get_ldev_info(cb);
+ interval = 10;
+ } else if (cb->need_rbld) {
+ cb->need_rbld = false;
+ dev_dbg(&shost->shost_gendev,
+ "get rebuild progress\n");
+ myrb_update_rbld_progress(cb);
+ interval = 10;
+ } else if (cb->need_cc_status) {
+ cb->need_cc_status = false;
+ dev_dbg(&shost->shost_gendev,
+ "get consistency check progress\n");
+ myrb_get_cc_progress(cb);
+ interval = 10;
+ } else if (cb->need_bgi_status) {
+ cb->need_bgi_status = false;
+ dev_dbg(&shost->shost_gendev, "get background init status\n");
+ myrb_bgi_control(cb);
+ interval = 10;
+ } else {
+ dev_dbg(&shost->shost_gendev, "new enquiry\n");
+ mutex_lock(&cb->dma_mutex);
+ myrb_hba_enquiry(cb);
+ mutex_unlock(&cb->dma_mutex);
+ if ((cb->new_ev_seq - cb->old_ev_seq > 0) ||
+ cb->need_err_info || cb->need_rbld ||
+ cb->need_ldev_info || cb->need_cc_status ||
+ cb->need_bgi_status) {
+ dev_dbg(&shost->shost_gendev,
+ "reschedule monitor\n");
+ interval = 0;
+ }
+ }
+ if (interval > 1)
+ cb->primary_monitor_time = jiffies;
+ queue_delayed_work(cb->work_q, &cb->monitor_work, interval);
+}
+
+/**
+ * myrb_err_status - reports controller BIOS messages
+ *
+ * Controller BIOS messages are passed through the Error Status Register
+ * when the driver performs the BIOS handshaking.
+ *
+ * Return: true for fatal errors and false otherwise.
+ */
+bool myrb_err_status(struct myrb_hba *cb, unsigned char error,
+ unsigned char parm0, unsigned char parm1)
+{
+ struct pci_dev *pdev = cb->pdev;
+
+ switch (error) {
+ case 0x00:
+ dev_info(&pdev->dev,
+ "Physical Device %d:%d Not Responding\n",
+ parm1, parm0);
+ break;
+ case 0x08:
+ dev_notice(&pdev->dev, "Spinning Up Drives\n");
+ break;
+ case 0x30:
+ dev_notice(&pdev->dev, "Configuration Checksum Error\n");
+ break;
+ case 0x60:
+ dev_notice(&pdev->dev, "Mirror Race Recovery Failed\n");
+ break;
+ case 0x70:
+ dev_notice(&pdev->dev, "Mirror Race Recovery In Progress\n");
+ break;
+ case 0x90:
+ dev_notice(&pdev->dev, "Physical Device %d:%d COD Mismatch\n",
+ parm1, parm0);
+ break;
+ case 0xA0:
+ dev_notice(&pdev->dev, "Logical Drive Installation Aborted\n");
+ break;
+ case 0xB0:
+ dev_notice(&pdev->dev, "Mirror Race On A Critical Logical Drive\n");
+ break;
+ case 0xD0:
+ dev_notice(&pdev->dev, "New Controller Configuration Found\n");
+ break;
+ case 0xF0:
+ dev_err(&pdev->dev, "Fatal Memory Parity Error\n");
+ return true;
+ default:
+ dev_err(&pdev->dev, "Unknown Initialization Error %02X\n",
+ error);
+ return true;
+ }
+ return false;
+}
+
+/*
+ * Hardware-specific functions
+ */
+
+/*
+ * DAC960 LA Series Controllers
+ */
+
+static inline void DAC960_LA_hw_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_LA_IDB_HWMBOX_NEW_CMD, base + DAC960_LA_IDB_OFFSET);
+}
+
+static inline void DAC960_LA_ack_hw_mbox_status(void __iomem *base)
+{
+ writeb(DAC960_LA_IDB_HWMBOX_ACK_STS, base + DAC960_LA_IDB_OFFSET);
+}
+
+static inline void DAC960_LA_gen_intr(void __iomem *base)
+{
+ writeb(DAC960_LA_IDB_GEN_IRQ, base + DAC960_LA_IDB_OFFSET);
+}
+
+static inline void DAC960_LA_reset_ctrl(void __iomem *base)
+{
+ writeb(DAC960_LA_IDB_CTRL_RESET, base + DAC960_LA_IDB_OFFSET);
+}
+
+static inline void DAC960_LA_mem_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_LA_IDB_MMBOX_NEW_CMD, base + DAC960_LA_IDB_OFFSET);
+}
+
+static inline bool DAC960_LA_hw_mbox_is_full(void __iomem *base)
+{
+ unsigned char idb = readb(base + DAC960_LA_IDB_OFFSET);
+
+ return !(idb & DAC960_LA_IDB_HWMBOX_EMPTY);
+}
+
+static inline bool DAC960_LA_init_in_progress(void __iomem *base)
+{
+ unsigned char idb = readb(base + DAC960_LA_IDB_OFFSET);
+
+ return !(idb & DAC960_LA_IDB_INIT_DONE);
+}
+
+static inline void DAC960_LA_ack_hw_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_LA_ODB_HWMBOX_ACK_IRQ, base + DAC960_LA_ODB_OFFSET);
+}
+
+static inline void DAC960_LA_ack_mem_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_LA_ODB_MMBOX_ACK_IRQ, base + DAC960_LA_ODB_OFFSET);
+}
+
+static inline void DAC960_LA_ack_intr(void __iomem *base)
+{
+ writeb(DAC960_LA_ODB_HWMBOX_ACK_IRQ | DAC960_LA_ODB_MMBOX_ACK_IRQ,
+ base + DAC960_LA_ODB_OFFSET);
+}
+
+static inline bool DAC960_LA_hw_mbox_status_available(void __iomem *base)
+{
+ unsigned char odb = readb(base + DAC960_LA_ODB_OFFSET);
+
+ return odb & DAC960_LA_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline bool DAC960_LA_mem_mbox_status_available(void __iomem *base)
+{
+ unsigned char odb = readb(base + DAC960_LA_ODB_OFFSET);
+
+ return odb & DAC960_LA_ODB_MMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_LA_enable_intr(void __iomem *base)
+{
+ unsigned char odb = 0xFF;
+
+ odb &= ~DAC960_LA_IRQMASK_DISABLE_IRQ;
+ writeb(odb, base + DAC960_LA_IRQMASK_OFFSET);
+}
+
+static inline void DAC960_LA_disable_intr(void __iomem *base)
+{
+ unsigned char odb = 0xFF;
+
+ odb |= DAC960_LA_IRQMASK_DISABLE_IRQ;
+ writeb(odb, base + DAC960_LA_IRQMASK_OFFSET);
+}
+
+static inline bool DAC960_LA_intr_enabled(void __iomem *base)
+{
+ unsigned char imask = readb(base + DAC960_LA_IRQMASK_OFFSET);
+
+ return !(imask & DAC960_LA_IRQMASK_DISABLE_IRQ);
+}
+
+static inline void DAC960_LA_write_cmd_mbox(union myrb_cmd_mbox *mem_mbox,
+ union myrb_cmd_mbox *mbox)
+{
+ mem_mbox->words[1] = mbox->words[1];
+ mem_mbox->words[2] = mbox->words[2];
+ mem_mbox->words[3] = mbox->words[3];
+ /* Memory barrier to prevent reordering */
+ wmb();
+ mem_mbox->words[0] = mbox->words[0];
+ /* Memory barrier to force PCI access */
+ mb();
+}
+
+static inline void DAC960_LA_write_hw_mbox(void __iomem *base,
+ union myrb_cmd_mbox *mbox)
+{
+ writel(mbox->words[0], base + DAC960_LA_CMDOP_OFFSET);
+ writel(mbox->words[1], base + DAC960_LA_MBOX4_OFFSET);
+ writel(mbox->words[2], base + DAC960_LA_MBOX8_OFFSET);
+ writeb(mbox->bytes[12], base + DAC960_LA_MBOX12_OFFSET);
+}
+
+static inline unsigned char DAC960_LA_read_status_cmd_ident(void __iomem *base)
+{
+ return readb(base + DAC960_LA_STSID_OFFSET);
+}
+
+static inline unsigned short DAC960_LA_read_status(void __iomem *base)
+{
+ return readw(base + DAC960_LA_STS_OFFSET);
+}
+
+static inline bool
+DAC960_LA_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ unsigned char errsts = readb(base + DAC960_LA_ERRSTS_OFFSET);
+
+ if (!(errsts & DAC960_LA_ERRSTS_PENDING))
+ return false;
+ errsts &= ~DAC960_LA_ERRSTS_PENDING;
+
+ *error = errsts;
+ *param0 = readb(base + DAC960_LA_CMDOP_OFFSET);
+ *param1 = readb(base + DAC960_LA_CMDID_OFFSET);
+ writeb(0xFF, base + DAC960_LA_ERRSTS_OFFSET);
+ return true;
+}
+
+static inline unsigned short
+DAC960_LA_mbox_init(struct pci_dev *pdev, void __iomem *base,
+ union myrb_cmd_mbox *mbox)
+{
+ unsigned short status;
+ int timeout = 0;
+
+ while (timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (!DAC960_LA_hw_mbox_is_full(base))
+ break;
+ udelay(10);
+ timeout++;
+ }
+ if (DAC960_LA_hw_mbox_is_full(base)) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for empty mailbox\n");
+ return MYRB_STATUS_SUBSYS_TIMEOUT;
+ }
+ DAC960_LA_write_hw_mbox(base, mbox);
+ DAC960_LA_hw_mbox_new_cmd(base);
+ timeout = 0;
+ while (timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_LA_hw_mbox_status_available(base))
+ break;
+ udelay(10);
+ timeout++;
+ }
+ if (!DAC960_LA_hw_mbox_status_available(base)) {
+ dev_err(&pdev->dev, "Timeout waiting for mailbox status\n");
+ return MYRB_STATUS_SUBSYS_TIMEOUT;
+ }
+ status = DAC960_LA_read_status(base);
+ DAC960_LA_ack_hw_mbox_intr(base);
+ DAC960_LA_ack_hw_mbox_status(base);
+
+ return status;
+}
+
+static int DAC960_LA_hw_init(struct pci_dev *pdev,
+ struct myrb_hba *cb, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char error, parm0, parm1;
+
+ DAC960_LA_disable_intr(base);
+ DAC960_LA_ack_hw_mbox_status(base);
+ udelay(1000);
+ timeout = 0;
+ while (DAC960_LA_init_in_progress(base) &&
+ timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_LA_read_error_status(base, &error,
+ &parm0, &parm1) &&
+ myrb_err_status(cb, error, parm0, parm1))
+ return -ENODEV;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRB_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrb_enable_mmio(cb, DAC960_LA_mbox_init)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_LA_reset_ctrl(base);
+ return -ENODEV;
+ }
+ DAC960_LA_enable_intr(base);
+ cb->qcmd = myrb_qcmd;
+ cb->write_cmd_mbox = DAC960_LA_write_cmd_mbox;
+ if (cb->dual_mode_interface)
+ cb->get_cmd_mbox = DAC960_LA_mem_mbox_new_cmd;
+ else
+ cb->get_cmd_mbox = DAC960_LA_hw_mbox_new_cmd;
+ cb->disable_intr = DAC960_LA_disable_intr;
+ cb->reset = DAC960_LA_reset_ctrl;
+
+ return 0;
+}
+
+static irqreturn_t DAC960_LA_intr_handler(int irq, void *arg)
+{
+ struct myrb_hba *cb = arg;
+ void __iomem *base = cb->io_base;
+ struct myrb_stat_mbox *next_stat_mbox;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ DAC960_LA_ack_intr(base);
+ next_stat_mbox = cb->next_stat_mbox;
+ while (next_stat_mbox->valid) {
+ unsigned char id = next_stat_mbox->id;
+ struct scsi_cmnd *scmd = NULL;
+ struct myrb_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRB_DCMD_TAG)
+ cmd_blk = &cb->dcmd_blk;
+ else if (id == MYRB_MCMD_TAG)
+ cmd_blk = &cb->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cb->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk)
+ cmd_blk->status = next_stat_mbox->status;
+ else
+ dev_err(&cb->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ memset(next_stat_mbox, 0, sizeof(struct myrb_stat_mbox));
+ if (++next_stat_mbox > cb->last_stat_mbox)
+ next_stat_mbox = cb->first_stat_mbox;
+
+ if (cmd_blk) {
+ if (id < 3)
+ myrb_handle_cmdblk(cb, cmd_blk);
+ else
+ myrb_handle_scsi(cb, cmd_blk, scmd);
+ }
+ }
+ cb->next_stat_mbox = next_stat_mbox;
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrb_privdata DAC960_LA_privdata = {
+ .hw_init = DAC960_LA_hw_init,
+ .irq_handler = DAC960_LA_intr_handler,
+ .mmio_size = DAC960_LA_mmio_size,
+};
+
+/*
+ * DAC960 PG Series Controllers
+ */
+static inline void DAC960_PG_hw_mbox_new_cmd(void __iomem *base)
+{
+ writel(DAC960_PG_IDB_HWMBOX_NEW_CMD, base + DAC960_PG_IDB_OFFSET);
+}
+
+static inline void DAC960_PG_ack_hw_mbox_status(void __iomem *base)
+{
+ writel(DAC960_PG_IDB_HWMBOX_ACK_STS, base + DAC960_PG_IDB_OFFSET);
+}
+
+static inline void DAC960_PG_gen_intr(void __iomem *base)
+{
+ writel(DAC960_PG_IDB_GEN_IRQ, base + DAC960_PG_IDB_OFFSET);
+}
+
+static inline void DAC960_PG_reset_ctrl(void __iomem *base)
+{
+ writel(DAC960_PG_IDB_CTRL_RESET, base + DAC960_PG_IDB_OFFSET);
+}
+
+static inline void DAC960_PG_mem_mbox_new_cmd(void __iomem *base)
+{
+ writel(DAC960_PG_IDB_MMBOX_NEW_CMD, base + DAC960_PG_IDB_OFFSET);
+}
+
+static inline bool DAC960_PG_hw_mbox_is_full(void __iomem *base)
+{
+ unsigned char idb = readl(base + DAC960_PG_IDB_OFFSET);
+
+ return idb & DAC960_PG_IDB_HWMBOX_FULL;
+}
+
+static inline bool DAC960_PG_init_in_progress(void __iomem *base)
+{
+ unsigned char idb = readl(base + DAC960_PG_IDB_OFFSET);
+
+ return idb & DAC960_PG_IDB_INIT_IN_PROGRESS;
+}
+
+static inline void DAC960_PG_ack_hw_mbox_intr(void __iomem *base)
+{
+ writel(DAC960_PG_ODB_HWMBOX_ACK_IRQ, base + DAC960_PG_ODB_OFFSET);
+}
+
+static inline void DAC960_PG_ack_mem_mbox_intr(void __iomem *base)
+{
+ writel(DAC960_PG_ODB_MMBOX_ACK_IRQ, base + DAC960_PG_ODB_OFFSET);
+}
+
+static inline void DAC960_PG_ack_intr(void __iomem *base)
+{
+ writel(DAC960_PG_ODB_HWMBOX_ACK_IRQ | DAC960_PG_ODB_MMBOX_ACK_IRQ,
+ base + DAC960_PG_ODB_OFFSET);
+}
+
+static inline bool DAC960_PG_hw_mbox_status_available(void __iomem *base)
+{
+ unsigned char odb = readl(base + DAC960_PG_ODB_OFFSET);
+
+ return odb & DAC960_PG_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline bool DAC960_PG_mem_mbox_status_available(void __iomem *base)
+{
+ unsigned char odb = readl(base + DAC960_PG_ODB_OFFSET);
+
+ return odb & DAC960_PG_ODB_MMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_PG_enable_intr(void __iomem *base)
+{
+ unsigned int imask = (unsigned int)-1;
+
+ imask &= ~DAC960_PG_IRQMASK_DISABLE_IRQ;
+ writel(imask, base + DAC960_PG_IRQMASK_OFFSET);
+}
+
+static inline void DAC960_PG_disable_intr(void __iomem *base)
+{
+ unsigned int imask = (unsigned int)-1;
+
+ writel(imask, base + DAC960_PG_IRQMASK_OFFSET);
+}
+
+static inline bool DAC960_PG_intr_enabled(void __iomem *base)
+{
+ unsigned int imask = readl(base + DAC960_PG_IRQMASK_OFFSET);
+
+ return !(imask & DAC960_PG_IRQMASK_DISABLE_IRQ);
+}
+
+static inline void DAC960_PG_write_cmd_mbox(union myrb_cmd_mbox *mem_mbox,
+ union myrb_cmd_mbox *mbox)
+{
+ mem_mbox->words[1] = mbox->words[1];
+ mem_mbox->words[2] = mbox->words[2];
+ mem_mbox->words[3] = mbox->words[3];
+ /* Memory barrier to prevent reordering */
+ wmb();
+ mem_mbox->words[0] = mbox->words[0];
+ /* Memory barrier to force PCI access */
+ mb();
+}
+
+static inline void DAC960_PG_write_hw_mbox(void __iomem *base,
+ union myrb_cmd_mbox *mbox)
+{
+ writel(mbox->words[0], base + DAC960_PG_CMDOP_OFFSET);
+ writel(mbox->words[1], base + DAC960_PG_MBOX4_OFFSET);
+ writel(mbox->words[2], base + DAC960_PG_MBOX8_OFFSET);
+ writeb(mbox->bytes[12], base + DAC960_PG_MBOX12_OFFSET);
+}
+
+static inline unsigned char
+DAC960_PG_read_status_cmd_ident(void __iomem *base)
+{
+ return readb(base + DAC960_PG_STSID_OFFSET);
+}
+
+static inline unsigned short
+DAC960_PG_read_status(void __iomem *base)
+{
+ return readw(base + DAC960_PG_STS_OFFSET);
+}
+
+static inline bool
+DAC960_PG_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ unsigned char errsts = readb(base + DAC960_PG_ERRSTS_OFFSET);
+
+ if (!(errsts & DAC960_PG_ERRSTS_PENDING))
+ return false;
+ errsts &= ~DAC960_PG_ERRSTS_PENDING;
+ *error = errsts;
+ *param0 = readb(base + DAC960_PG_CMDOP_OFFSET);
+ *param1 = readb(base + DAC960_PG_CMDID_OFFSET);
+ writeb(0, base + DAC960_PG_ERRSTS_OFFSET);
+ return true;
+}
+
+static inline unsigned short
+DAC960_PG_mbox_init(struct pci_dev *pdev, void __iomem *base,
+ union myrb_cmd_mbox *mbox)
+{
+ unsigned short status;
+ int timeout = 0;
+
+ while (timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (!DAC960_PG_hw_mbox_is_full(base))
+ break;
+ udelay(10);
+ timeout++;
+ }
+ if (DAC960_PG_hw_mbox_is_full(base)) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for empty mailbox\n");
+ return MYRB_STATUS_SUBSYS_TIMEOUT;
+ }
+ DAC960_PG_write_hw_mbox(base, mbox);
+ DAC960_PG_hw_mbox_new_cmd(base);
+
+ timeout = 0;
+ while (timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_PG_hw_mbox_status_available(base))
+ break;
+ udelay(10);
+ timeout++;
+ }
+ if (!DAC960_PG_hw_mbox_status_available(base)) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for mailbox status\n");
+ return MYRB_STATUS_SUBSYS_TIMEOUT;
+ }
+ status = DAC960_PG_read_status(base);
+ DAC960_PG_ack_hw_mbox_intr(base);
+ DAC960_PG_ack_hw_mbox_status(base);
+
+ return status;
+}
+
+static int DAC960_PG_hw_init(struct pci_dev *pdev,
+ struct myrb_hba *cb, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char error, parm0, parm1;
+
+ DAC960_PG_disable_intr(base);
+ DAC960_PG_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_PG_init_in_progress(base) &&
+ timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_PG_read_error_status(base, &error,
+ &parm0, &parm1) &&
+ myrb_err_status(cb, error, parm0, parm1))
+ return -EIO;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRB_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrb_enable_mmio(cb, DAC960_PG_mbox_init)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_PG_reset_ctrl(base);
+ return -ENODEV;
+ }
+ DAC960_PG_enable_intr(base);
+ cb->qcmd = myrb_qcmd;
+ cb->write_cmd_mbox = DAC960_PG_write_cmd_mbox;
+ if (cb->dual_mode_interface)
+ cb->get_cmd_mbox = DAC960_PG_mem_mbox_new_cmd;
+ else
+ cb->get_cmd_mbox = DAC960_PG_hw_mbox_new_cmd;
+ cb->disable_intr = DAC960_PG_disable_intr;
+ cb->reset = DAC960_PG_reset_ctrl;
+
+ return 0;
+}
+
+static irqreturn_t DAC960_PG_intr_handler(int irq, void *arg)
+{
+ struct myrb_hba *cb = arg;
+ void __iomem *base = cb->io_base;
+ struct myrb_stat_mbox *next_stat_mbox;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ DAC960_PG_ack_intr(base);
+ next_stat_mbox = cb->next_stat_mbox;
+ while (next_stat_mbox->valid) {
+ unsigned char id = next_stat_mbox->id;
+ struct scsi_cmnd *scmd = NULL;
+ struct myrb_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRB_DCMD_TAG)
+ cmd_blk = &cb->dcmd_blk;
+ else if (id == MYRB_MCMD_TAG)
+ cmd_blk = &cb->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cb->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk)
+ cmd_blk->status = next_stat_mbox->status;
+ else
+ dev_err(&cb->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ memset(next_stat_mbox, 0, sizeof(struct myrb_stat_mbox));
+ if (++next_stat_mbox > cb->last_stat_mbox)
+ next_stat_mbox = cb->first_stat_mbox;
+
+ if (id < 3)
+ myrb_handle_cmdblk(cb, cmd_blk);
+ else
+ myrb_handle_scsi(cb, cmd_blk, scmd);
+ }
+ cb->next_stat_mbox = next_stat_mbox;
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrb_privdata DAC960_PG_privdata = {
+ .hw_init = DAC960_PG_hw_init,
+ .irq_handler = DAC960_PG_intr_handler,
+ .mmio_size = DAC960_PG_mmio_size,
+};
+
+
+/*
+ * DAC960 PD Series Controllers
+ */
+
+static inline void DAC960_PD_hw_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_PD_IDB_HWMBOX_NEW_CMD, base + DAC960_PD_IDB_OFFSET);
+}
+
+static inline void DAC960_PD_ack_hw_mbox_status(void __iomem *base)
+{
+ writeb(DAC960_PD_IDB_HWMBOX_ACK_STS, base + DAC960_PD_IDB_OFFSET);
+}
+
+static inline void DAC960_PD_gen_intr(void __iomem *base)
+{
+ writeb(DAC960_PD_IDB_GEN_IRQ, base + DAC960_PD_IDB_OFFSET);
+}
+
+static inline void DAC960_PD_reset_ctrl(void __iomem *base)
+{
+ writeb(DAC960_PD_IDB_CTRL_RESET, base + DAC960_PD_IDB_OFFSET);
+}
+
+static inline bool DAC960_PD_hw_mbox_is_full(void __iomem *base)
+{
+ unsigned char idb = readb(base + DAC960_PD_IDB_OFFSET);
+
+ return idb & DAC960_PD_IDB_HWMBOX_FULL;
+}
+
+static inline bool DAC960_PD_init_in_progress(void __iomem *base)
+{
+ unsigned char idb = readb(base + DAC960_PD_IDB_OFFSET);
+
+ return idb & DAC960_PD_IDB_INIT_IN_PROGRESS;
+}
+
+static inline void DAC960_PD_ack_intr(void __iomem *base)
+{
+ writeb(DAC960_PD_ODB_HWMBOX_ACK_IRQ, base + DAC960_PD_ODB_OFFSET);
+}
+
+static inline bool DAC960_PD_hw_mbox_status_available(void __iomem *base)
+{
+ unsigned char odb = readb(base + DAC960_PD_ODB_OFFSET);
+
+ return odb & DAC960_PD_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_PD_enable_intr(void __iomem *base)
+{
+ writeb(DAC960_PD_IRQMASK_ENABLE_IRQ, base + DAC960_PD_IRQEN_OFFSET);
+}
+
+static inline void DAC960_PD_disable_intr(void __iomem *base)
+{
+ writeb(0, base + DAC960_PD_IRQEN_OFFSET);
+}
+
+static inline bool DAC960_PD_intr_enabled(void __iomem *base)
+{
+ unsigned char imask = readb(base + DAC960_PD_IRQEN_OFFSET);
+
+ return imask & DAC960_PD_IRQMASK_ENABLE_IRQ;
+}
+
+static inline void DAC960_PD_write_cmd_mbox(void __iomem *base,
+ union myrb_cmd_mbox *mbox)
+{
+ writel(mbox->words[0], base + DAC960_PD_CMDOP_OFFSET);
+ writel(mbox->words[1], base + DAC960_PD_MBOX4_OFFSET);
+ writel(mbox->words[2], base + DAC960_PD_MBOX8_OFFSET);
+ writeb(mbox->bytes[12], base + DAC960_PD_MBOX12_OFFSET);
+}
+
+static inline unsigned char
+DAC960_PD_read_status_cmd_ident(void __iomem *base)
+{
+ return readb(base + DAC960_PD_STSID_OFFSET);
+}
+
+static inline unsigned short
+DAC960_PD_read_status(void __iomem *base)
+{
+ return readw(base + DAC960_PD_STS_OFFSET);
+}
+
+static inline bool
+DAC960_PD_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ unsigned char errsts = readb(base + DAC960_PD_ERRSTS_OFFSET);
+
+ if (!(errsts & DAC960_PD_ERRSTS_PENDING))
+ return false;
+ errsts &= ~DAC960_PD_ERRSTS_PENDING;
+ *error = errsts;
+ *param0 = readb(base + DAC960_PD_CMDOP_OFFSET);
+ *param1 = readb(base + DAC960_PD_CMDID_OFFSET);
+ writeb(0, base + DAC960_PD_ERRSTS_OFFSET);
+ return true;
+}
+
+static void DAC960_PD_qcmd(struct myrb_hba *cb, struct myrb_cmdblk *cmd_blk)
+{
+ void __iomem *base = cb->io_base;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+
+ while (DAC960_PD_hw_mbox_is_full(base))
+ udelay(1);
+ DAC960_PD_write_cmd_mbox(base, mbox);
+ DAC960_PD_hw_mbox_new_cmd(base);
+}
+
+static int DAC960_PD_hw_init(struct pci_dev *pdev,
+ struct myrb_hba *cb, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char error, parm0, parm1;
+
+ if (!request_region(cb->io_addr, 0x80, "myrb")) {
+ dev_err(&pdev->dev, "IO port 0x%lx busy\n",
+ (unsigned long)cb->io_addr);
+ return -EBUSY;
+ }
+ DAC960_PD_disable_intr(base);
+ DAC960_PD_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_PD_init_in_progress(base) &&
+ timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_PD_read_error_status(base, &error,
+ &parm0, &parm1) &&
+ myrb_err_status(cb, error, parm0, parm1))
+ return -EIO;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRB_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrb_enable_mmio(cb, NULL)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_PD_reset_ctrl(base);
+ return -ENODEV;
+ }
+ DAC960_PD_enable_intr(base);
+ cb->qcmd = DAC960_PD_qcmd;
+ cb->disable_intr = DAC960_PD_disable_intr;
+ cb->reset = DAC960_PD_reset_ctrl;
+
+ return 0;
+}
+
+static irqreturn_t DAC960_PD_intr_handler(int irq, void *arg)
+{
+ struct myrb_hba *cb = arg;
+ void __iomem *base = cb->io_base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ while (DAC960_PD_hw_mbox_status_available(base)) {
+ unsigned char id = DAC960_PD_read_status_cmd_ident(base);
+ struct scsi_cmnd *scmd = NULL;
+ struct myrb_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRB_DCMD_TAG)
+ cmd_blk = &cb->dcmd_blk;
+ else if (id == MYRB_MCMD_TAG)
+ cmd_blk = &cb->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cb->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk)
+ cmd_blk->status = DAC960_PD_read_status(base);
+ else
+ dev_err(&cb->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ DAC960_PD_ack_intr(base);
+ DAC960_PD_ack_hw_mbox_status(base);
+
+ if (id < 3)
+ myrb_handle_cmdblk(cb, cmd_blk);
+ else
+ myrb_handle_scsi(cb, cmd_blk, scmd);
+ }
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrb_privdata DAC960_PD_privdata = {
+ .hw_init = DAC960_PD_hw_init,
+ .irq_handler = DAC960_PD_intr_handler,
+ .mmio_size = DAC960_PD_mmio_size,
+};
+
+
+/*
+ * DAC960 P Series Controllers
+ *
+ * Similar to the DAC960 PD Series Controllers, but some commands have
+ * to be translated.
+ */
+
+static inline void myrb_translate_enquiry(void *enq)
+{
+ memcpy(enq + 132, enq + 36, 64);
+ memset(enq + 36, 0, 96);
+}
+
+static inline void myrb_translate_devstate(void *state)
+{
+ memcpy(state + 2, state + 3, 1);
+ memmove(state + 4, state + 5, 2);
+ memmove(state + 6, state + 8, 4);
+}
+
+static inline void myrb_translate_to_rw_command(struct myrb_cmdblk *cmd_blk)
+{
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ int ldev_num = mbox->type5.ld.ldev_num;
+
+ mbox->bytes[3] &= 0x7;
+ mbox->bytes[3] |= mbox->bytes[7] << 6;
+ mbox->bytes[7] = ldev_num;
+}
+
+static inline void myrb_translate_from_rw_command(struct myrb_cmdblk *cmd_blk)
+{
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+ int ldev_num = mbox->bytes[7];
+
+ mbox->bytes[7] = mbox->bytes[3] >> 6;
+ mbox->bytes[3] &= 0x7;
+ mbox->bytes[3] |= ldev_num << 3;
+}
+
+static void DAC960_P_qcmd(struct myrb_hba *cb, struct myrb_cmdblk *cmd_blk)
+{
+ void __iomem *base = cb->io_base;
+ union myrb_cmd_mbox *mbox = &cmd_blk->mbox;
+
+ switch (mbox->common.opcode) {
+ case MYRB_CMD_ENQUIRY:
+ mbox->common.opcode = MYRB_CMD_ENQUIRY_OLD;
+ break;
+ case MYRB_CMD_GET_DEVICE_STATE:
+ mbox->common.opcode = MYRB_CMD_GET_DEVICE_STATE_OLD;
+ break;
+ case MYRB_CMD_READ:
+ mbox->common.opcode = MYRB_CMD_READ_OLD;
+ myrb_translate_to_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_WRITE:
+ mbox->common.opcode = MYRB_CMD_WRITE_OLD;
+ myrb_translate_to_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_READ_SG:
+ mbox->common.opcode = MYRB_CMD_READ_SG_OLD;
+ myrb_translate_to_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_WRITE_SG:
+ mbox->common.opcode = MYRB_CMD_WRITE_SG_OLD;
+ myrb_translate_to_rw_command(cmd_blk);
+ break;
+ default:
+ break;
+ }
+ while (DAC960_PD_hw_mbox_is_full(base))
+ udelay(1);
+ DAC960_PD_write_cmd_mbox(base, mbox);
+ DAC960_PD_hw_mbox_new_cmd(base);
+}
+
+
+static int DAC960_P_hw_init(struct pci_dev *pdev,
+ struct myrb_hba *cb, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char error, parm0, parm1;
+
+ if (!request_region(cb->io_addr, 0x80, "myrb")) {
+ dev_err(&pdev->dev, "IO port 0x%lx busy\n",
+ (unsigned long)cb->io_addr);
+ return -EBUSY;
+ }
+ DAC960_PD_disable_intr(base);
+ DAC960_PD_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_PD_init_in_progress(base) &&
+ timeout < MYRB_MAILBOX_TIMEOUT) {
+ if (DAC960_PD_read_error_status(base, &error,
+ &parm0, &parm1) &&
+ myrb_err_status(cb, error, parm0, parm1))
+ return -EAGAIN;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRB_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrb_enable_mmio(cb, NULL)) {
+ dev_err(&pdev->dev,
+ "Unable to allocate DMA mapped memory\n");
+ DAC960_PD_reset_ctrl(base);
+ return -ETIMEDOUT;
+ }
+ DAC960_PD_enable_intr(base);
+ cb->qcmd = DAC960_P_qcmd;
+ cb->disable_intr = DAC960_PD_disable_intr;
+ cb->reset = DAC960_PD_reset_ctrl;
+
+ return 0;
+}
+
+static irqreturn_t DAC960_P_intr_handler(int irq, void *arg)
+{
+ struct myrb_hba *cb = arg;
+ void __iomem *base = cb->io_base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cb->queue_lock, flags);
+ while (DAC960_PD_hw_mbox_status_available(base)) {
+ unsigned char id = DAC960_PD_read_status_cmd_ident(base);
+ struct scsi_cmnd *scmd = NULL;
+ struct myrb_cmdblk *cmd_blk = NULL;
+ union myrb_cmd_mbox *mbox;
+ enum myrb_cmd_opcode op;
+
+
+ if (id == MYRB_DCMD_TAG)
+ cmd_blk = &cb->dcmd_blk;
+ else if (id == MYRB_MCMD_TAG)
+ cmd_blk = &cb->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cb->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk)
+ cmd_blk->status = DAC960_PD_read_status(base);
+ else
+ dev_err(&cb->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ DAC960_PD_ack_intr(base);
+ DAC960_PD_ack_hw_mbox_status(base);
+
+ if (!cmd_blk)
+ continue;
+
+ mbox = &cmd_blk->mbox;
+ op = mbox->common.opcode;
+ switch (op) {
+ case MYRB_CMD_ENQUIRY_OLD:
+ mbox->common.opcode = MYRB_CMD_ENQUIRY;
+ myrb_translate_enquiry(cb->enquiry);
+ break;
+ case MYRB_CMD_READ_OLD:
+ mbox->common.opcode = MYRB_CMD_READ;
+ myrb_translate_from_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_WRITE_OLD:
+ mbox->common.opcode = MYRB_CMD_WRITE;
+ myrb_translate_from_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_READ_SG_OLD:
+ mbox->common.opcode = MYRB_CMD_READ_SG;
+ myrb_translate_from_rw_command(cmd_blk);
+ break;
+ case MYRB_CMD_WRITE_SG_OLD:
+ mbox->common.opcode = MYRB_CMD_WRITE_SG;
+ myrb_translate_from_rw_command(cmd_blk);
+ break;
+ default:
+ break;
+ }
+ if (id < 3)
+ myrb_handle_cmdblk(cb, cmd_blk);
+ else
+ myrb_handle_scsi(cb, cmd_blk, scmd);
+ }
+ spin_unlock_irqrestore(&cb->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrb_privdata DAC960_P_privdata = {
+ .hw_init = DAC960_P_hw_init,
+ .irq_handler = DAC960_P_intr_handler,
+ .mmio_size = DAC960_PD_mmio_size,
+};
+
+static struct myrb_hba *myrb_detect(struct pci_dev *pdev,
+ const struct pci_device_id *entry)
+{
+ struct myrb_privdata *privdata =
+ (struct myrb_privdata *)entry->driver_data;
+ irq_handler_t irq_handler = privdata->irq_handler;
+ unsigned int mmio_size = privdata->mmio_size;
+ struct Scsi_Host *shost;
+ struct myrb_hba *cb = NULL;
+
+ shost = scsi_host_alloc(&myrb_template, sizeof(struct myrb_hba));
+ if (!shost) {
+ dev_err(&pdev->dev, "Unable to allocate Controller\n");
+ return NULL;
+ }
+ shost->max_cmd_len = 12;
+ shost->max_lun = 256;
+ cb = shost_priv(shost);
+ mutex_init(&cb->dcmd_mutex);
+ mutex_init(&cb->dma_mutex);
+ cb->pdev = pdev;
+
+ if (pci_enable_device(pdev))
+ goto failure;
+
+ if (privdata->hw_init == DAC960_PD_hw_init ||
+ privdata->hw_init == DAC960_P_hw_init) {
+ cb->io_addr = pci_resource_start(pdev, 0);
+ cb->pci_addr = pci_resource_start(pdev, 1);
+ } else
+ cb->pci_addr = pci_resource_start(pdev, 0);
+
+ pci_set_drvdata(pdev, cb);
+ spin_lock_init(&cb->queue_lock);
+ if (mmio_size < PAGE_SIZE)
+ mmio_size = PAGE_SIZE;
+ cb->mmio_base = ioremap_nocache(cb->pci_addr & PAGE_MASK, mmio_size);
+ if (cb->mmio_base == NULL) {
+ dev_err(&pdev->dev,
+ "Unable to map Controller Register Window\n");
+ goto failure;
+ }
+
+ cb->io_base = cb->mmio_base + (cb->pci_addr & ~PAGE_MASK);
+ if (privdata->hw_init(pdev, cb, cb->io_base))
+ goto failure;
+
+ if (request_irq(pdev->irq, irq_handler, IRQF_SHARED, "myrb", cb) < 0) {
+ dev_err(&pdev->dev,
+ "Unable to acquire IRQ Channel %d\n", pdev->irq);
+ goto failure;
+ }
+ cb->irq = pdev->irq;
+ return cb;
+
+failure:
+ dev_err(&pdev->dev,
+ "Failed to initialize Controller\n");
+ myrb_cleanup(cb);
+ return NULL;
+}
+
+static int myrb_probe(struct pci_dev *dev, const struct pci_device_id *entry)
+{
+ struct myrb_hba *cb;
+ int ret;
+
+ cb = myrb_detect(dev, entry);
+ if (!cb)
+ return -ENODEV;
+
+ ret = myrb_get_hba_config(cb);
+ if (ret < 0) {
+ myrb_cleanup(cb);
+ return ret;
+ }
+
+ if (!myrb_create_mempools(dev, cb)) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ ret = scsi_add_host(cb->host, &dev->dev);
+ if (ret) {
+ dev_err(&dev->dev, "scsi_add_host failed with %d\n", ret);
+ myrb_destroy_mempools(cb);
+ goto failed;
+ }
+ scsi_scan_host(cb->host);
+ return 0;
+failed:
+ myrb_cleanup(cb);
+ return ret;
+}
+
+
+static void myrb_remove(struct pci_dev *pdev)
+{
+ struct myrb_hba *cb = pci_get_drvdata(pdev);
+
+ shost_printk(KERN_NOTICE, cb->host, "Flushing Cache...");
+ myrb_exec_type3(cb, MYRB_CMD_FLUSH, 0);
+ myrb_cleanup(cb);
+ myrb_destroy_mempools(cb);
+}
+
+
+static const struct pci_device_id myrb_id_table[] = {
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_DEC,
+ PCI_DEVICE_ID_DEC_21285,
+ PCI_SUBVENDOR_ID_MYLEX,
+ PCI_SUBDEVICE_ID_MYLEX_DAC960_LA),
+ .driver_data = (unsigned long) &DAC960_LA_privdata,
+ },
+ {
+ PCI_DEVICE_DATA(MYLEX, DAC960_PG, &DAC960_PG_privdata),
+ },
+ {
+ PCI_DEVICE_DATA(MYLEX, DAC960_PD, &DAC960_PD_privdata),
+ },
+ {
+ PCI_DEVICE_DATA(MYLEX, DAC960_P, &DAC960_P_privdata),
+ },
+ {0, },
+};
+
+MODULE_DEVICE_TABLE(pci, myrb_id_table);
+
+static struct pci_driver myrb_pci_driver = {
+ .name = "myrb",
+ .id_table = myrb_id_table,
+ .probe = myrb_probe,
+ .remove = myrb_remove,
+};
+
+static int __init myrb_init_module(void)
+{
+ int ret;
+
+ myrb_raid_template = raid_class_attach(&myrb_raid_functions);
+ if (!myrb_raid_template)
+ return -ENODEV;
+
+ ret = pci_register_driver(&myrb_pci_driver);
+ if (ret)
+ raid_class_release(myrb_raid_template);
+
+ return ret;
+}
+
+static void __exit myrb_cleanup_module(void)
+{
+ pci_unregister_driver(&myrb_pci_driver);
+ raid_class_release(myrb_raid_template);
+}
+
+module_init(myrb_init_module);
+module_exit(myrb_cleanup_module);
+
+MODULE_DESCRIPTION("Mylex DAC960/AcceleRAID/eXtremeRAID driver (Block interface)");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/myrb.h b/drivers/scsi/myrb.h
new file mode 100644
index 000000000000..9289c19fcb2f
--- /dev/null
+++ b/drivers/scsi/myrb.h
@@ -0,0 +1,958 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
+ *
+ * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
+ *
+ * Based on the original DAC960 driver,
+ * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
+ * Portions Copyright 2002 by Mylex (An IBM Business Unit)
+ *
+ */
+
+#ifndef MYRB_H
+#define MYRB_H
+
+#define MYRB_MAX_LDEVS 32
+#define MYRB_MAX_CHANNELS 3
+#define MYRB_MAX_TARGETS 16
+#define MYRB_MAX_PHYSICAL_DEVICES 45
+#define MYRB_SCATTER_GATHER_LIMIT 32
+#define MYRB_CMD_MBOX_COUNT 256
+#define MYRB_STAT_MBOX_COUNT 1024
+
+#define MYRB_BLKSIZE_BITS 9
+#define MYRB_MAILBOX_TIMEOUT 1000000
+
+#define MYRB_DCMD_TAG 1
+#define MYRB_MCMD_TAG 2
+
+#define MYRB_PRIMARY_MONITOR_INTERVAL (10 * HZ)
+#define MYRB_SECONDARY_MONITOR_INTERVAL (60 * HZ)
+
+/*
+ * DAC960 V1 Firmware Command Opcodes.
+ */
+enum myrb_cmd_opcode {
+ /* I/O Commands */
+ MYRB_CMD_READ_EXTENDED = 0x33,
+ MYRB_CMD_WRITE_EXTENDED = 0x34,
+ MYRB_CMD_READAHEAD_EXTENDED = 0x35,
+ MYRB_CMD_READ_EXTENDED_SG = 0xB3,
+ MYRB_CMD_WRITE_EXTENDED_SG = 0xB4,
+ MYRB_CMD_READ = 0x36,
+ MYRB_CMD_READ_SG = 0xB6,
+ MYRB_CMD_WRITE = 0x37,
+ MYRB_CMD_WRITE_SG = 0xB7,
+ MYRB_CMD_DCDB = 0x04,
+ MYRB_CMD_DCDB_SG = 0x84,
+ MYRB_CMD_FLUSH = 0x0A,
+ /* Controller Status Related Commands */
+ MYRB_CMD_ENQUIRY = 0x53,
+ MYRB_CMD_ENQUIRY2 = 0x1C,
+ MYRB_CMD_GET_LDRV_ELEMENT = 0x55,
+ MYRB_CMD_GET_LDEV_INFO = 0x19,
+ MYRB_CMD_IOPORTREAD = 0x39,
+ MYRB_CMD_IOPORTWRITE = 0x3A,
+ MYRB_CMD_GET_SD_STATS = 0x3E,
+ MYRB_CMD_GET_PD_STATS = 0x3F,
+ MYRB_CMD_EVENT_LOG_OPERATION = 0x72,
+ /* Device Related Commands */
+ MYRB_CMD_START_DEVICE = 0x10,
+ MYRB_CMD_GET_DEVICE_STATE = 0x50,
+ MYRB_CMD_STOP_CHANNEL = 0x13,
+ MYRB_CMD_START_CHANNEL = 0x12,
+ MYRB_CMD_RESET_CHANNEL = 0x1A,
+ /* Commands Associated with Data Consistency and Errors */
+ MYRB_CMD_REBUILD = 0x09,
+ MYRB_CMD_REBUILD_ASYNC = 0x16,
+ MYRB_CMD_CHECK_CONSISTENCY = 0x0F,
+ MYRB_CMD_CHECK_CONSISTENCY_ASYNC = 0x1E,
+ MYRB_CMD_REBUILD_STAT = 0x0C,
+ MYRB_CMD_GET_REBUILD_PROGRESS = 0x27,
+ MYRB_CMD_REBUILD_CONTROL = 0x1F,
+ MYRB_CMD_READ_BADBLOCK_TABLE = 0x0B,
+ MYRB_CMD_READ_BADDATA_TABLE = 0x25,
+ MYRB_CMD_CLEAR_BADDATA_TABLE = 0x26,
+ MYRB_CMD_GET_ERROR_TABLE = 0x17,
+ MYRB_CMD_ADD_CAPACITY_ASYNC = 0x2A,
+ MYRB_CMD_BGI_CONTROL = 0x2B,
+ /* Configuration Related Commands */
+ MYRB_CMD_READ_CONFIG2 = 0x3D,
+ MYRB_CMD_WRITE_CONFIG2 = 0x3C,
+ MYRB_CMD_READ_CONFIG_ONDISK = 0x4A,
+ MYRB_CMD_WRITE_CONFIG_ONDISK = 0x4B,
+ MYRB_CMD_READ_CONFIG = 0x4E,
+ MYRB_CMD_READ_BACKUP_CONFIG = 0x4D,
+ MYRB_CMD_WRITE_CONFIG = 0x4F,
+ MYRB_CMD_ADD_CONFIG = 0x4C,
+ MYRB_CMD_READ_CONFIG_LABEL = 0x48,
+ MYRB_CMD_WRITE_CONFIG_LABEL = 0x49,
+ /* Firmware Upgrade Related Commands */
+ MYRB_CMD_LOAD_IMAGE = 0x20,
+ MYRB_CMD_STORE_IMAGE = 0x21,
+ MYRB_CMD_PROGRAM_IMAGE = 0x22,
+ /* Diagnostic Commands */
+ MYRB_CMD_SET_DIAGNOSTIC_MODE = 0x31,
+ MYRB_CMD_RUN_DIAGNOSTIC = 0x32,
+ /* Subsystem Service Commands */
+ MYRB_CMD_GET_SUBSYS_DATA = 0x70,
+ MYRB_CMD_SET_SUBSYS_PARAM = 0x71,
+ /* Version 2.xx Firmware Commands */
+ MYRB_CMD_ENQUIRY_OLD = 0x05,
+ MYRB_CMD_GET_DEVICE_STATE_OLD = 0x14,
+ MYRB_CMD_READ_OLD = 0x02,
+ MYRB_CMD_WRITE_OLD = 0x03,
+ MYRB_CMD_READ_SG_OLD = 0x82,
+ MYRB_CMD_WRITE_SG_OLD = 0x83
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Command Status Codes.
+ */
+#define MYRB_STATUS_SUCCESS 0x0000 /* Common */
+#define MYRB_STATUS_CHECK_CONDITION 0x0002 /* Common */
+#define MYRB_STATUS_NO_DEVICE 0x0102 /* Common */
+#define MYRB_STATUS_INVALID_ADDRESS 0x0105 /* Common */
+#define MYRB_STATUS_INVALID_PARAM 0x0105 /* Common */
+#define MYRB_STATUS_IRRECOVERABLE_DATA_ERROR 0x0001 /* I/O */
+#define MYRB_STATUS_LDRV_NONEXISTENT_OR_OFFLINE 0x0002 /* I/O */
+#define MYRB_STATUS_ACCESS_BEYOND_END_OF_LDRV 0x0105 /* I/O */
+#define MYRB_STATUS_BAD_DATA 0x010C /* I/O */
+#define MYRB_STATUS_DEVICE_BUSY 0x0008 /* DCDB */
+#define MYRB_STATUS_DEVICE_NONRESPONSIVE 0x000E /* DCDB */
+#define MYRB_STATUS_COMMAND_TERMINATED 0x000F /* DCDB */
+#define MYRB_STATUS_START_DEVICE_FAILED 0x0002 /* Device */
+#define MYRB_STATUS_INVALID_CHANNEL_OR_TARGET 0x0105 /* Device */
+#define MYRB_STATUS_CHANNEL_BUSY 0x0106 /* Device */
+#define MYRB_STATUS_OUT_OF_MEMORY 0x0107 /* Device */
+#define MYRB_STATUS_CHANNEL_NOT_STOPPED 0x0002 /* Device */
+#define MYRB_STATUS_ATTEMPT_TO_RBLD_ONLINE_DRIVE 0x0002 /* Consistency */
+#define MYRB_STATUS_RBLD_BADBLOCKS 0x0003 /* Consistency */
+#define MYRB_STATUS_RBLD_NEW_DISK_FAILED 0x0004 /* Consistency */
+#define MYRB_STATUS_RBLD_OR_CHECK_INPROGRESS 0x0106 /* Consistency */
+#define MYRB_STATUS_DEPENDENT_DISK_DEAD 0x0002 /* Consistency */
+#define MYRB_STATUS_INCONSISTENT_BLOCKS 0x0003 /* Consistency */
+#define MYRB_STATUS_INVALID_OR_NONREDUNDANT_LDRV 0x0105 /* Consistency */
+#define MYRB_STATUS_NO_RBLD_OR_CHECK_INPROGRESS 0x0105 /* Consistency */
+#define MYRB_STATUS_RBLD_IN_PROGRESS_DATA_VALID 0x0000 /* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_LDEV_FAILURE 0x0002 /* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_BADBLOCKS 0x0003 /* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_NEW_DRIVE_FAILED 0x0004 /* Consistency */
+#define MYRB_STATUS_RBLD_SUCCESS 0x0100 /* Consistency */
+#define MYRB_STATUS_RBLD_SUCCESS_TERMINATED 0x0107 /* Consistency */
+#define MYRB_STATUS_RBLD_NOT_CHECKED 0x0108 /* Consistency */
+#define MYRB_STATUS_BGI_SUCCESS 0x0100 /* Consistency */
+#define MYRB_STATUS_BGI_ABORTED 0x0005 /* Consistency */
+#define MYRB_STATUS_NO_BGI_INPROGRESS 0x0105 /* Consistency */
+#define MYRB_STATUS_ADD_CAPACITY_INPROGRESS 0x0004 /* Consistency */
+#define MYRB_STATUS_ADD_CAPACITY_FAILED_OR_SUSPENDED 0x00F4 /* Consistency */
+#define MYRB_STATUS_CONFIG2_CSUM_ERROR 0x0002 /* Configuration */
+#define MYRB_STATUS_CONFIGURATION_SUSPENDED 0x0106 /* Configuration */
+#define MYRB_STATUS_FAILED_TO_CONFIGURE_NVRAM 0x0105 /* Configuration */
+#define MYRB_STATUS_CONFIGURATION_NOT_SAVED 0x0106 /* Configuration */
+#define MYRB_STATUS_SUBSYS_NOTINSTALLED 0x0001 /* Subsystem */
+#define MYRB_STATUS_SUBSYS_FAILED 0x0002 /* Subsystem */
+#define MYRB_STATUS_SUBSYS_BUSY 0x0106 /* Subsystem */
+#define MYRB_STATUS_SUBSYS_TIMEOUT 0x0108 /* Subsystem */
+
+/*
+ * DAC960 V1 Firmware Enquiry Command reply structure.
+ */
+struct myrb_enquiry {
+ unsigned char ldev_count; /* Byte 0 */
+ unsigned int rsvd1:24; /* Bytes 1-3 */
+ unsigned int ldev_sizes[32]; /* Bytes 4-131 */
+ unsigned short flash_age; /* Bytes 132-133 */
+ struct {
+ unsigned char deferred:1; /* Byte 134 Bit 0 */
+ unsigned char low_bat:1; /* Byte 134 Bit 1 */
+ unsigned char rsvd2:6; /* Byte 134 Bits 2-7 */
+ } status;
+ unsigned char rsvd3:8; /* Byte 135 */
+ unsigned char fw_minor_version; /* Byte 136 */
+ unsigned char fw_major_version; /* Byte 137 */
+ enum {
+ MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS = 0x00,
+ MYRB_STDBY_RBLD_IN_PROGRESS = 0x01,
+ MYRB_BG_RBLD_IN_PROGRESS = 0x02,
+ MYRB_BG_CHECK_IN_PROGRESS = 0x03,
+ MYRB_STDBY_RBLD_COMPLETED_WITH_ERROR = 0xFF,
+ MYRB_BG_RBLD_OR_CHECK_FAILED_DRIVE_FAILED = 0xF0,
+ MYRB_BG_RBLD_OR_CHECK_FAILED_LDEV_FAILED = 0xF1,
+ MYRB_BG_RBLD_OR_CHECK_FAILED_OTHER = 0xF2,
+ MYRB_BG_RBLD_OR_CHECK_SUCCESS_TERMINATED = 0xF3
+ } __packed rbld; /* Byte 138 */
+ unsigned char max_tcq; /* Byte 139 */
+ unsigned char ldev_offline; /* Byte 140 */
+ unsigned char rsvd4:8; /* Byte 141 */
+ unsigned short ev_seq; /* Bytes 142-143 */
+ unsigned char ldev_critical; /* Byte 144 */
+ unsigned int rsvd5:24; /* Bytes 145-147 */
+ unsigned char pdev_dead; /* Byte 148 */
+ unsigned char rsvd6:8; /* Byte 149 */
+ unsigned char rbld_count; /* Byte 150 */
+ struct {
+ unsigned char rsvd7:3; /* Byte 151 Bits 0-2 */
+ unsigned char bbu_present:1; /* Byte 151 Bit 3 */
+ unsigned char rsvd8:4; /* Byte 151 Bits 4-7 */
+ } misc;
+ struct {
+ unsigned char target;
+ unsigned char channel;
+ } dead_drives[21]; /* Bytes 152-194 */
+ unsigned char rsvd9[62]; /* Bytes 195-255 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Enquiry2 Command reply structure.
+ */
+struct myrb_enquiry2 {
+ struct {
+ enum {
+ DAC960_V1_P_PD_PU = 0x01,
+ DAC960_V1_PL = 0x02,
+ DAC960_V1_PG = 0x10,
+ DAC960_V1_PJ = 0x11,
+ DAC960_V1_PR = 0x12,
+ DAC960_V1_PT = 0x13,
+ DAC960_V1_PTL0 = 0x14,
+ DAC960_V1_PRL = 0x15,
+ DAC960_V1_PTL1 = 0x16,
+ DAC960_V1_1164P = 0x20
+ } __packed sub_model; /* Byte 0 */
+ unsigned char actual_channels; /* Byte 1 */
+ enum {
+ MYRB_5_CHANNEL_BOARD = 0x01,
+ MYRB_3_CHANNEL_BOARD = 0x02,
+ MYRB_2_CHANNEL_BOARD = 0x03,
+ MYRB_3_CHANNEL_ASIC_DAC = 0x04
+ } __packed model; /* Byte 2 */
+ enum {
+ MYRB_EISA_CONTROLLER = 0x01,
+ MYRB_MCA_CONTROLLER = 0x02,
+ MYRB_PCI_CONTROLLER = 0x03,
+ MYRB_SCSI_TO_SCSI = 0x08
+ } __packed controller; /* Byte 3 */
+ } hw; /* Bytes 0-3 */
+ /* MajorVersion.MinorVersion-FirmwareType-TurnID */
+ struct {
+ unsigned char major_version; /* Byte 4 */
+ unsigned char minor_version; /* Byte 5 */
+ unsigned char turn_id; /* Byte 6 */
+ char firmware_type; /* Byte 7 */
+ } fw; /* Bytes 4-7 */
+ unsigned int rsvd1; /* Byte 8-11 */
+ unsigned char cfg_chan; /* Byte 12 */
+ unsigned char cur_chan; /* Byte 13 */
+ unsigned char max_targets; /* Byte 14 */
+ unsigned char max_tcq; /* Byte 15 */
+ unsigned char max_ldev; /* Byte 16 */
+ unsigned char max_arms; /* Byte 17 */
+ unsigned char max_spans; /* Byte 18 */
+ unsigned char rsvd2; /* Byte 19 */
+ unsigned int rsvd3; /* Bytes 20-23 */
+ unsigned int mem_size; /* Bytes 24-27 */
+ unsigned int cache_size; /* Bytes 28-31 */
+ unsigned int flash_size; /* Bytes 32-35 */
+ unsigned int nvram_size; /* Bytes 36-39 */
+ struct {
+ enum {
+ MYRB_RAM_TYPE_DRAM = 0x0,
+ MYRB_RAM_TYPE_EDO = 0x1,
+ MYRB_RAM_TYPE_SDRAM = 0x2,
+ MYRB_RAM_TYPE_Last = 0x7
+ } __packed ram:3; /* Byte 40 Bits 0-2 */
+ enum {
+ MYRB_ERR_CORR_None = 0x0,
+ MYRB_ERR_CORR_Parity = 0x1,
+ MYRB_ERR_CORR_ECC = 0x2,
+ MYRB_ERR_CORR_Last = 0x7
+ } __packed ec:3; /* Byte 40 Bits 3-5 */
+ unsigned char fast_page:1; /* Byte 40 Bit 6 */
+ unsigned char low_power:1; /* Byte 40 Bit 7 */
+ unsigned char rsvd4; /* Bytes 41 */
+ } mem_type;
+ unsigned short clock_speed; /* Bytes 42-43 */
+ unsigned short mem_speed; /* Bytes 44-45 */
+ unsigned short hw_speed; /* Bytes 46-47 */
+ unsigned char rsvd5[12]; /* Bytes 48-59 */
+ unsigned short max_cmds; /* Bytes 60-61 */
+ unsigned short max_sge; /* Bytes 62-63 */
+ unsigned short max_drv_cmds; /* Bytes 64-65 */
+ unsigned short max_io_desc; /* Bytes 66-67 */
+ unsigned short max_sectors; /* Bytes 68-69 */
+ unsigned char latency; /* Byte 70 */
+ unsigned char rsvd6; /* Byte 71 */
+ unsigned char scsi_tmo; /* Byte 72 */
+ unsigned char rsvd7; /* Byte 73 */
+ unsigned short min_freelines; /* Bytes 74-75 */
+ unsigned char rsvd8[8]; /* Bytes 76-83 */
+ unsigned char rbld_rate_const; /* Byte 84 */
+ unsigned char rsvd9[11]; /* Byte 85-95 */
+ unsigned short pdrv_block_size; /* Bytes 96-97 */
+ unsigned short ldev_block_size; /* Bytes 98-99 */
+ unsigned short max_blocks_per_cmd; /* Bytes 100-101 */
+ unsigned short block_factor; /* Bytes 102-103 */
+ unsigned short cacheline_size; /* Bytes 104-105 */
+ struct {
+ enum {
+ MYRB_WIDTH_NARROW_8BIT = 0x0,
+ MYRB_WIDTH_WIDE_16BIT = 0x1,
+ MYRB_WIDTH_WIDE_32BIT = 0x2
+ } __packed bus_width:2; /* Byte 106 Bits 0-1 */
+ enum {
+ MYRB_SCSI_SPEED_FAST = 0x0,
+ MYRB_SCSI_SPEED_ULTRA = 0x1,
+ MYRB_SCSI_SPEED_ULTRA2 = 0x2
+ } __packed bus_speed:2; /* Byte 106 Bits 2-3 */
+ unsigned char differential:1; /* Byte 106 Bit 4 */
+ unsigned char rsvd10:3; /* Byte 106 Bits 5-7 */
+ } scsi_cap;
+ unsigned char rsvd11[5]; /* Byte 107-111 */
+ unsigned short fw_build; /* Bytes 112-113 */
+ enum {
+ MYRB_FAULT_AEMI = 0x01,
+ MYRB_FAULT_OEM1 = 0x02,
+ MYRB_FAULT_OEM2 = 0x04,
+ MYRB_FAULT_OEM3 = 0x08,
+ MYRB_FAULT_CONNER = 0x10,
+ MYRB_FAULT_SAFTE = 0x20
+ } __packed fault_mgmt; /* Byte 114 */
+ unsigned char rsvd12; /* Byte 115 */
+ struct {
+ unsigned int clustering:1; /* Byte 116 Bit 0 */
+ unsigned int online_RAID_expansion:1; /* Byte 116 Bit 1 */
+ unsigned int readahead:1; /* Byte 116 Bit 2 */
+ unsigned int bgi:1; /* Byte 116 Bit 3 */
+ unsigned int rsvd13:28; /* Bytes 116-119 */
+ } fw_features;
+ unsigned char rsvd14[8]; /* Bytes 120-127 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Logical Drive State type.
+ */
+enum myrb_devstate {
+ MYRB_DEVICE_DEAD = 0x00,
+ MYRB_DEVICE_WO = 0x02,
+ MYRB_DEVICE_ONLINE = 0x03,
+ MYRB_DEVICE_CRITICAL = 0x04,
+ MYRB_DEVICE_STANDBY = 0x10,
+ MYRB_DEVICE_OFFLINE = 0xFF
+} __packed;
+
+/*
+ * DAC960 V1 RAID Levels
+ */
+enum myrb_raidlevel {
+ MYRB_RAID_LEVEL0 = 0x0, /* RAID 0 */
+ MYRB_RAID_LEVEL1 = 0x1, /* RAID 1 */
+ MYRB_RAID_LEVEL3 = 0x3, /* RAID 3 */
+ MYRB_RAID_LEVEL5 = 0x5, /* RAID 5 */
+ MYRB_RAID_LEVEL6 = 0x6, /* RAID 6 */
+ MYRB_RAID_JBOD = 0x7, /* RAID 7 (JBOD) */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Logical Drive Information structure.
+ */
+struct myrb_ldev_info {
+ unsigned int size; /* Bytes 0-3 */
+ enum myrb_devstate state; /* Byte 4 */
+ unsigned int raid_level:7; /* Byte 5 Bits 0-6 */
+ unsigned int wb_enabled:1; /* Byte 5 Bit 7 */
+ unsigned int rsvd:16; /* Bytes 6-7 */
+};
+
+/*
+ * DAC960 V1 Firmware Perform Event Log Operation Types.
+ */
+#define DAC960_V1_GetEventLogEntry 0x00
+
+/*
+ * DAC960 V1 Firmware Get Event Log Entry Command reply structure.
+ */
+struct myrb_log_entry {
+ unsigned char msg_type; /* Byte 0 */
+ unsigned char msg_len; /* Byte 1 */
+ unsigned char target:5; /* Byte 2 Bits 0-4 */
+ unsigned char channel:3; /* Byte 2 Bits 5-7 */
+ unsigned char lun:6; /* Byte 3 Bits 0-5 */
+ unsigned char rsvd1:2; /* Byte 3 Bits 6-7 */
+ unsigned short seq_num; /* Bytes 4-5 */
+ unsigned char sense[26]; /* Bytes 6-31 */
+};
+
+/*
+ * DAC960 V1 Firmware Get Device State Command reply structure.
+ * The structure is padded by 2 bytes for compatibility with Version 2.xx
+ * Firmware.
+ */
+struct myrb_pdev_state {
+ unsigned int present:1; /* Byte 0 Bit 0 */
+ unsigned int :7; /* Byte 0 Bits 1-7 */
+ enum {
+ MYRB_TYPE_OTHER = 0x0,
+ MYRB_TYPE_DISK = 0x1,
+ MYRB_TYPE_TAPE = 0x2,
+ MYRB_TYPE_CDROM_OR_WORM = 0x3
+ } __packed devtype:2; /* Byte 1 Bits 0-1 */
+ unsigned int rsvd1:1; /* Byte 1 Bit 2 */
+ unsigned int fast20:1; /* Byte 1 Bit 3 */
+ unsigned int sync:1; /* Byte 1 Bit 4 */
+ unsigned int fast:1; /* Byte 1 Bit 5 */
+ unsigned int wide:1; /* Byte 1 Bit 6 */
+ unsigned int tcq_supported:1; /* Byte 1 Bit 7 */
+ enum myrb_devstate state; /* Byte 2 */
+ unsigned int rsvd2:8; /* Byte 3 */
+ unsigned int sync_multiplier; /* Byte 4 */
+ unsigned int sync_offset:5; /* Byte 5 Bits 0-4 */
+ unsigned int rsvd3:3; /* Byte 5 Bits 5-7 */
+ unsigned int size; /* Bytes 6-9 */
+ unsigned int rsvd4:16; /* Bytes 10-11 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
+ */
+struct myrb_rbld_progress {
+ unsigned int ldev_num; /* Bytes 0-3 */
+ unsigned int ldev_size; /* Bytes 4-7 */
+ unsigned int blocks_left; /* Bytes 8-11 */
+};
+
+/*
+ * DAC960 V1 Firmware Background Initialization Status Command reply structure.
+ */
+struct myrb_bgi_status {
+ unsigned int ldev_size; /* Bytes 0-3 */
+ unsigned int blocks_done; /* Bytes 4-7 */
+ unsigned char rsvd1[12]; /* Bytes 8-19 */
+ unsigned int ldev_num; /* Bytes 20-23 */
+ unsigned char raid_level; /* Byte 24 */
+ enum {
+ MYRB_BGI_INVALID = 0x00,
+ MYRB_BGI_STARTED = 0x02,
+ MYRB_BGI_INPROGRESS = 0x04,
+ MYRB_BGI_SUSPENDED = 0x05,
+ MYRB_BGI_CANCELLED = 0x06
+ } __packed status; /* Byte 25 */
+ unsigned char rsvd2[6]; /* Bytes 26-31 */
+};
+
+/*
+ * DAC960 V1 Firmware Error Table Entry structure.
+ */
+struct myrb_error_entry {
+ unsigned char parity_err; /* Byte 0 */
+ unsigned char soft_err; /* Byte 1 */
+ unsigned char hard_err; /* Byte 2 */
+ unsigned char misc_err; /* Byte 3 */
+};
+
+/*
+ * DAC960 V1 Firmware Read Config2 Command reply structure.
+ */
+struct myrb_config2 {
+ unsigned rsvd1:1; /* Byte 0 Bit 0 */
+ unsigned active_negation:1; /* Byte 0 Bit 1 */
+ unsigned rsvd2:5; /* Byte 0 Bits 2-6 */
+ unsigned no_rescan_on_reset_during_scan:1; /* Byte 0 Bit 7 */
+ unsigned StorageWorks_support:1; /* Byte 1 Bit 0 */
+ unsigned HewlettPackard_support:1; /* Byte 1 Bit 1 */
+ unsigned no_disconnect_on_first_command:1; /* Byte 1 Bit 2 */
+ unsigned rsvd3:2; /* Byte 1 Bits 3-4 */
+ unsigned AEMI_ARM:1; /* Byte 1 Bit 5 */
+ unsigned AEMI_OFM:1; /* Byte 1 Bit 6 */
+ unsigned rsvd4:1; /* Byte 1 Bit 7 */
+ enum {
+ MYRB_OEMID_MYLEX = 0x00,
+ MYRB_OEMID_IBM = 0x08,
+ MYRB_OEMID_HP = 0x0A,
+ MYRB_OEMID_DEC = 0x0C,
+ MYRB_OEMID_SIEMENS = 0x10,
+ MYRB_OEMID_INTEL = 0x12
+ } __packed OEMID; /* Byte 2 */
+ unsigned char oem_model_number; /* Byte 3 */
+ unsigned char physical_sector; /* Byte 4 */
+ unsigned char logical_sector; /* Byte 5 */
+ unsigned char block_factor; /* Byte 6 */
+ unsigned readahead_enabled:1; /* Byte 7 Bit 0 */
+ unsigned low_BIOS_delay:1; /* Byte 7 Bit 1 */
+ unsigned rsvd5:2; /* Byte 7 Bits 2-3 */
+ unsigned restrict_reassign_to_one_sector:1; /* Byte 7 Bit 4 */
+ unsigned rsvd6:1; /* Byte 7 Bit 5 */
+ unsigned FUA_during_write_recovery:1; /* Byte 7 Bit 6 */
+ unsigned enable_LeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */
+ unsigned char default_rebuild_rate; /* Byte 8 */
+ unsigned char rsvd7; /* Byte 9 */
+ unsigned char blocks_per_cacheline; /* Byte 10 */
+ unsigned char blocks_per_stripe; /* Byte 11 */
+ struct {
+ enum {
+ MYRB_SPEED_ASYNC = 0x0,
+ MYRB_SPEED_SYNC_8MHz = 0x1,
+ MYRB_SPEED_SYNC_5MHz = 0x2,
+ MYRB_SPEED_SYNC_10_OR_20MHz = 0x3
+ } __packed speed:2; /* Byte 11 Bits 0-1 */
+ unsigned force_8bit:1; /* Byte 11 Bit 2 */
+ unsigned disable_fast20:1; /* Byte 11 Bit 3 */
+ unsigned rsvd8:3; /* Byte 11 Bits 4-6 */
+ unsigned enable_tcq:1; /* Byte 11 Bit 7 */
+ } __packed channelparam[6]; /* Bytes 12-17 */
+ unsigned char SCSIInitiatorID; /* Byte 18 */
+ unsigned char rsvd9; /* Byte 19 */
+ enum {
+ MYRB_STARTUP_CONTROLLER_SPINUP = 0x00,
+ MYRB_STARTUP_POWERON_SPINUP = 0x01
+ } __packed startup; /* Byte 20 */
+ unsigned char simultaneous_device_spinup_count; /* Byte 21 */
+ unsigned char seconds_delay_between_spinups; /* Byte 22 */
+ unsigned char rsvd10[29]; /* Bytes 23-51 */
+ unsigned BIOS_disabled:1; /* Byte 52 Bit 0 */
+ unsigned CDROM_boot_enabled:1; /* Byte 52 Bit 1 */
+ unsigned rsvd11:3; /* Byte 52 Bits 2-4 */
+ enum {
+ MYRB_GEOM_128_32 = 0x0,
+ MYRB_GEOM_255_63 = 0x1,
+ MYRB_GEOM_RESERVED1 = 0x2,
+ MYRB_GEOM_RESERVED2 = 0x3
+ } __packed drive_geometry:2; /* Byte 52 Bits 5-6 */
+ unsigned rsvd12:1; /* Byte 52 Bit 7 */
+ unsigned char rsvd13[9]; /* Bytes 53-61 */
+ unsigned short csum; /* Bytes 62-63 */
+};
+
+/*
+ * DAC960 V1 Firmware DCDB request structure.
+ */
+struct myrb_dcdb {
+ unsigned target:4; /* Byte 0 Bits 0-3 */
+ unsigned channel:4; /* Byte 0 Bits 4-7 */
+ enum {
+ MYRB_DCDB_XFER_NONE = 0,
+ MYRB_DCDB_XFER_DEVICE_TO_SYSTEM = 1,
+ MYRB_DCDB_XFER_SYSTEM_TO_DEVICE = 2,
+ MYRB_DCDB_XFER_ILLEGAL = 3
+ } __packed data_xfer:2; /* Byte 1 Bits 0-1 */
+ unsigned early_status:1; /* Byte 1 Bit 2 */
+ unsigned rsvd1:1; /* Byte 1 Bit 3 */
+ enum {
+ MYRB_DCDB_TMO_24_HRS = 0,
+ MYRB_DCDB_TMO_10_SECS = 1,
+ MYRB_DCDB_TMO_60_SECS = 2,
+ MYRB_DCDB_TMO_10_MINS = 3
+ } __packed timeout:2; /* Byte 1 Bits 4-5 */
+ unsigned no_autosense:1; /* Byte 1 Bit 6 */
+ unsigned allow_disconnect:1; /* Byte 1 Bit 7 */
+ unsigned short xfer_len_lo; /* Bytes 2-3 */
+ u32 dma_addr; /* Bytes 4-7 */
+ unsigned char cdb_len:4; /* Byte 8 Bits 0-3 */
+ unsigned char xfer_len_hi4:4; /* Byte 8 Bits 4-7 */
+ unsigned char sense_len; /* Byte 9 */
+ unsigned char cdb[12]; /* Bytes 10-21 */
+ unsigned char sense[64]; /* Bytes 22-85 */
+ unsigned char status; /* Byte 86 */
+ unsigned char rsvd2; /* Byte 87 */
+};
+
+/*
+ * DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
+ *32 Bit Byte Count structure.
+ */
+struct myrb_sge {
+ u32 sge_addr; /* Bytes 0-3 */
+ u32 sge_count; /* Bytes 4-7 */
+};
+
+/*
+ * 13 Byte DAC960 V1 Firmware Command Mailbox structure.
+ * Bytes 13-15 are not used. The structure is padded to 16 bytes for
+ * efficient access.
+ */
+union myrb_cmd_mbox {
+ unsigned int words[4]; /* Words 0-3 */
+ unsigned char bytes[16]; /* Bytes 0-15 */
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char rsvd[14]; /* Bytes 2-15 */
+ } __packed common;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char rsvd1[6]; /* Bytes 2-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char rsvd2[4]; /* Bytes 12-15 */
+ } __packed type3;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char optype; /* Byte 2 */
+ unsigned char rsvd1[5]; /* Bytes 3-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char rsvd2[4]; /* Bytes 12-15 */
+ } __packed type3B;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char rsvd1[5]; /* Bytes 2-6 */
+ unsigned char ldev_num:6; /* Byte 7 Bits 0-6 */
+ unsigned char auto_restore:1; /* Byte 7 Bit 7 */
+ unsigned char rsvd2[8]; /* Bytes 8-15 */
+ } __packed type3C;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char channel; /* Byte 2 */
+ unsigned char target; /* Byte 3 */
+ enum myrb_devstate state; /* Byte 4 */
+ unsigned char rsvd1[3]; /* Bytes 5-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char rsvd2[4]; /* Bytes 12-15 */
+ } __packed type3D;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char optype; /* Byte 2 */
+ unsigned char opqual; /* Byte 3 */
+ unsigned short ev_seq; /* Bytes 4-5 */
+ unsigned char rsvd1[2]; /* Bytes 6-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char rsvd2[4]; /* Bytes 12-15 */
+ } __packed type3E;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char rsvd1[2]; /* Bytes 2-3 */
+ unsigned char rbld_rate; /* Byte 4 */
+ unsigned char rsvd2[3]; /* Bytes 5-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char rsvd3[4]; /* Bytes 12-15 */
+ } __packed type3R;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned short xfer_len; /* Bytes 2-3 */
+ unsigned int lba; /* Bytes 4-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char ldev_num; /* Byte 12 */
+ unsigned char rsvd[3]; /* Bytes 13-15 */
+ } __packed type4;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ struct {
+ unsigned short xfer_len:11; /* Bytes 2-3 */
+ unsigned char ldev_num:5; /* Byte 3 Bits 3-7 */
+ } __packed ld;
+ unsigned int lba; /* Bytes 4-7 */
+ u32 addr; /* Bytes 8-11 */
+ unsigned char sg_count:6; /* Byte 12 Bits 0-5 */
+ enum {
+ MYRB_SGL_ADDR32_COUNT32 = 0x0,
+ MYRB_SGL_ADDR32_COUNT16 = 0x1,
+ MYRB_SGL_COUNT32_ADDR32 = 0x2,
+ MYRB_SGL_COUNT16_ADDR32 = 0x3
+ } __packed sg_type:2; /* Byte 12 Bits 6-7 */
+ unsigned char rsvd[3]; /* Bytes 13-15 */
+ } __packed type5;
+ struct {
+ enum myrb_cmd_opcode opcode; /* Byte 0 */
+ unsigned char id; /* Byte 1 */
+ unsigned char opcode2; /* Byte 2 */
+ unsigned char rsvd1:8; /* Byte 3 */
+ u32 cmd_mbox_addr; /* Bytes 4-7 */
+ u32 stat_mbox_addr; /* Bytes 8-11 */
+ unsigned char rsvd2[4]; /* Bytes 12-15 */
+ } __packed typeX;
+};
+
+/*
+ * DAC960 V1 Firmware Controller Status Mailbox structure.
+ */
+struct myrb_stat_mbox {
+ unsigned char id; /* Byte 0 */
+ unsigned char rsvd:7; /* Byte 1 Bits 0-6 */
+ unsigned char valid:1; /* Byte 1 Bit 7 */
+ unsigned short status; /* Bytes 2-3 */
+};
+
+struct myrb_cmdblk {
+ union myrb_cmd_mbox mbox;
+ unsigned short status;
+ struct completion *completion;
+ struct myrb_dcdb *dcdb;
+ dma_addr_t dcdb_addr;
+ struct myrb_sge *sgl;
+ dma_addr_t sgl_addr;
+};
+
+struct myrb_hba {
+ unsigned int ldev_block_size;
+ unsigned char ldev_geom_heads;
+ unsigned char ldev_geom_sectors;
+ unsigned char bus_width;
+ unsigned short stripe_size;
+ unsigned short segment_size;
+ unsigned short new_ev_seq;
+ unsigned short old_ev_seq;
+ bool dual_mode_interface;
+ bool bgi_status_supported;
+ bool safte_enabled;
+ bool need_ldev_info;
+ bool need_err_info;
+ bool need_rbld;
+ bool need_cc_status;
+ bool need_bgi_status;
+ bool rbld_first;
+
+ struct pci_dev *pdev;
+ struct Scsi_Host *host;
+
+ struct workqueue_struct *work_q;
+ char work_q_name[20];
+ struct delayed_work monitor_work;
+ unsigned long primary_monitor_time;
+ unsigned long secondary_monitor_time;
+
+ struct dma_pool *sg_pool;
+ struct dma_pool *dcdb_pool;
+
+ spinlock_t queue_lock;
+
+ void (*qcmd)(struct myrb_hba *cs, struct myrb_cmdblk *cmd_blk);
+ void (*write_cmd_mbox)(union myrb_cmd_mbox *next_mbox,
+ union myrb_cmd_mbox *cmd_mbox);
+ void (*get_cmd_mbox)(void __iomem *base);
+ void (*disable_intr)(void __iomem *base);
+ void (*reset)(void __iomem *base);
+
+ unsigned int ctlr_num;
+ unsigned char model_name[20];
+ unsigned char fw_version[12];
+
+ unsigned int irq;
+ phys_addr_t io_addr;
+ phys_addr_t pci_addr;
+ void __iomem *io_base;
+ void __iomem *mmio_base;
+
+ size_t cmd_mbox_size;
+ dma_addr_t cmd_mbox_addr;
+ union myrb_cmd_mbox *first_cmd_mbox;
+ union myrb_cmd_mbox *last_cmd_mbox;
+ union myrb_cmd_mbox *next_cmd_mbox;
+ union myrb_cmd_mbox *prev_cmd_mbox1;
+ union myrb_cmd_mbox *prev_cmd_mbox2;
+
+ size_t stat_mbox_size;
+ dma_addr_t stat_mbox_addr;
+ struct myrb_stat_mbox *first_stat_mbox;
+ struct myrb_stat_mbox *last_stat_mbox;
+ struct myrb_stat_mbox *next_stat_mbox;
+
+ struct myrb_cmdblk dcmd_blk;
+ struct myrb_cmdblk mcmd_blk;
+ struct mutex dcmd_mutex;
+
+ struct myrb_enquiry *enquiry;
+ dma_addr_t enquiry_addr;
+
+ struct myrb_error_entry *err_table;
+ dma_addr_t err_table_addr;
+
+ unsigned short last_rbld_status;
+
+ struct myrb_ldev_info *ldev_info_buf;
+ dma_addr_t ldev_info_addr;
+
+ struct myrb_bgi_status bgi_status;
+
+ struct mutex dma_mutex;
+};
+
+/*
+ * DAC960 LA Series Controller Interface Register Offsets.
+ */
+#define DAC960_LA_mmio_size 0x80
+
+enum DAC960_LA_reg_offset {
+ DAC960_LA_IRQMASK_OFFSET = 0x34,
+ DAC960_LA_CMDOP_OFFSET = 0x50,
+ DAC960_LA_CMDID_OFFSET = 0x51,
+ DAC960_LA_MBOX2_OFFSET = 0x52,
+ DAC960_LA_MBOX3_OFFSET = 0x53,
+ DAC960_LA_MBOX4_OFFSET = 0x54,
+ DAC960_LA_MBOX5_OFFSET = 0x55,
+ DAC960_LA_MBOX6_OFFSET = 0x56,
+ DAC960_LA_MBOX7_OFFSET = 0x57,
+ DAC960_LA_MBOX8_OFFSET = 0x58,
+ DAC960_LA_MBOX9_OFFSET = 0x59,
+ DAC960_LA_MBOX10_OFFSET = 0x5A,
+ DAC960_LA_MBOX11_OFFSET = 0x5B,
+ DAC960_LA_MBOX12_OFFSET = 0x5C,
+ DAC960_LA_STSID_OFFSET = 0x5D,
+ DAC960_LA_STS_OFFSET = 0x5E,
+ DAC960_LA_IDB_OFFSET = 0x60,
+ DAC960_LA_ODB_OFFSET = 0x61,
+ DAC960_LA_ERRSTS_OFFSET = 0x63,
+};
+
+/*
+ * DAC960 LA Series Inbound Door Bell Register.
+ */
+#define DAC960_LA_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_LA_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_LA_IDB_GEN_IRQ 0x04
+#define DAC960_LA_IDB_CTRL_RESET 0x08
+#define DAC960_LA_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_LA_IDB_HWMBOX_EMPTY 0x01
+#define DAC960_LA_IDB_INIT_DONE 0x02
+
+/*
+ * DAC960 LA Series Outbound Door Bell Register.
+ */
+#define DAC960_LA_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_LA_ODB_MMBOX_ACK_IRQ 0x02
+#define DAC960_LA_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_LA_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 LA Series Interrupt Mask Register.
+ */
+#define DAC960_LA_IRQMASK_DISABLE_IRQ 0x04
+
+/*
+ * DAC960 LA Series Error Status Register.
+ */
+#define DAC960_LA_ERRSTS_PENDING 0x02
+
+/*
+ * DAC960 PG Series Controller Interface Register Offsets.
+ */
+#define DAC960_PG_mmio_size 0x2000
+
+enum DAC960_PG_reg_offset {
+ DAC960_PG_IDB_OFFSET = 0x0020,
+ DAC960_PG_ODB_OFFSET = 0x002C,
+ DAC960_PG_IRQMASK_OFFSET = 0x0034,
+ DAC960_PG_CMDOP_OFFSET = 0x1000,
+ DAC960_PG_CMDID_OFFSET = 0x1001,
+ DAC960_PG_MBOX2_OFFSET = 0x1002,
+ DAC960_PG_MBOX3_OFFSET = 0x1003,
+ DAC960_PG_MBOX4_OFFSET = 0x1004,
+ DAC960_PG_MBOX5_OFFSET = 0x1005,
+ DAC960_PG_MBOX6_OFFSET = 0x1006,
+ DAC960_PG_MBOX7_OFFSET = 0x1007,
+ DAC960_PG_MBOX8_OFFSET = 0x1008,
+ DAC960_PG_MBOX9_OFFSET = 0x1009,
+ DAC960_PG_MBOX10_OFFSET = 0x100A,
+ DAC960_PG_MBOX11_OFFSET = 0x100B,
+ DAC960_PG_MBOX12_OFFSET = 0x100C,
+ DAC960_PG_STSID_OFFSET = 0x1018,
+ DAC960_PG_STS_OFFSET = 0x101A,
+ DAC960_PG_ERRSTS_OFFSET = 0x103F,
+};
+
+/*
+ * DAC960 PG Series Inbound Door Bell Register.
+ */
+#define DAC960_PG_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_PG_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_PG_IDB_GEN_IRQ 0x04
+#define DAC960_PG_IDB_CTRL_RESET 0x08
+#define DAC960_PG_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_PG_IDB_HWMBOX_FULL 0x01
+#define DAC960_PG_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 PG Series Outbound Door Bell Register.
+ */
+#define DAC960_PG_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_PG_ODB_MMBOX_ACK_IRQ 0x02
+#define DAC960_PG_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_PG_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 PG Series Interrupt Mask Register.
+ */
+#define DAC960_PG_IRQMASK_MSI_MASK1 0x03
+#define DAC960_PG_IRQMASK_DISABLE_IRQ 0x04
+#define DAC960_PG_IRQMASK_MSI_MASK2 0xF8
+
+/*
+ * DAC960 PG Series Error Status Register.
+ */
+#define DAC960_PG_ERRSTS_PENDING 0x04
+
+/*
+ * DAC960 PD Series Controller Interface Register Offsets.
+ */
+#define DAC960_PD_mmio_size 0x80
+
+enum DAC960_PD_reg_offset {
+ DAC960_PD_CMDOP_OFFSET = 0x00,
+ DAC960_PD_CMDID_OFFSET = 0x01,
+ DAC960_PD_MBOX2_OFFSET = 0x02,
+ DAC960_PD_MBOX3_OFFSET = 0x03,
+ DAC960_PD_MBOX4_OFFSET = 0x04,
+ DAC960_PD_MBOX5_OFFSET = 0x05,
+ DAC960_PD_MBOX6_OFFSET = 0x06,
+ DAC960_PD_MBOX7_OFFSET = 0x07,
+ DAC960_PD_MBOX8_OFFSET = 0x08,
+ DAC960_PD_MBOX9_OFFSET = 0x09,
+ DAC960_PD_MBOX10_OFFSET = 0x0A,
+ DAC960_PD_MBOX11_OFFSET = 0x0B,
+ DAC960_PD_MBOX12_OFFSET = 0x0C,
+ DAC960_PD_STSID_OFFSET = 0x0D,
+ DAC960_PD_STS_OFFSET = 0x0E,
+ DAC960_PD_ERRSTS_OFFSET = 0x3F,
+ DAC960_PD_IDB_OFFSET = 0x40,
+ DAC960_PD_ODB_OFFSET = 0x41,
+ DAC960_PD_IRQEN_OFFSET = 0x43,
+};
+
+/*
+ * DAC960 PD Series Inbound Door Bell Register.
+ */
+#define DAC960_PD_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_PD_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_PD_IDB_GEN_IRQ 0x04
+#define DAC960_PD_IDB_CTRL_RESET 0x08
+
+#define DAC960_PD_IDB_HWMBOX_FULL 0x01
+#define DAC960_PD_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 PD Series Outbound Door Bell Register.
+ */
+#define DAC960_PD_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_PD_ODB_HWMBOX_STS_AVAIL 0x01
+
+/*
+ * DAC960 PD Series Interrupt Enable Register.
+ */
+#define DAC960_PD_IRQMASK_ENABLE_IRQ 0x01
+
+/*
+ * DAC960 PD Series Error Status Register.
+ */
+#define DAC960_PD_ERRSTS_PENDING 0x04
+
+typedef int (*myrb_hw_init_t)(struct pci_dev *pdev,
+ struct myrb_hba *cb, void __iomem *base);
+typedef unsigned short (*mbox_mmio_init_t)(struct pci_dev *pdev,
+ void __iomem *base,
+ union myrb_cmd_mbox *mbox);
+
+struct myrb_privdata {
+ myrb_hw_init_t hw_init;
+ irq_handler_t irq_handler;
+ unsigned int mmio_size;
+};
+
+#endif /* MYRB_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 99d366cb0e9f..1efbd175411a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -922,10 +922,12 @@
#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
#define PCI_VENDOR_ID_MYLEX 0x1069
+#define PCI_SUBVENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002
#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010
#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020
+#define PCI_SUBDEVICE_ID_MYLEX_DAC960_LA 0x0020
#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050
#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
--
2.16.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 1/3] myrb: Add Mylex RAID controller (block interface)
2018-10-12 7:15 ` [PATCH 1/3] myrb: Add Mylex RAID controller (block interface) Hannes Reinecke
@ 2018-10-17 7:26 ` Christoph Hellwig
0 siblings, 0 replies; 13+ messages in thread
From: Christoph Hellwig @ 2018-10-17 7:26 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Jens Axboe, Martin K. Petersen, Christoph Hellwig,
James Bottomley, linux-scsi, linux-block, Hannes Reinecke
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 99d366cb0e9f..1efbd175411a 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -922,10 +922,12 @@
> #define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
>
> #define PCI_VENDOR_ID_MYLEX 0x1069
> +#define PCI_SUBVENDOR_ID_MYLEX 0x1069
Vendor and subvendor its are the same. Just use PCI_VENDOR_ID_MYLEX
where you;d want to use PCI_SUBVENDOR_ID_MYLEX.
> #define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
> #define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002
> #define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010
> #define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020
> +#define PCI_SUBDEVICE_ID_MYLEX_DAC960_LA 0x0020
Same here, in addition to the fact that we really don't
want single use PCI IDs in pci_ids.h.
Bonous points for just using the numeric values in the driver, and
adding another patch to remove them from pci_ids.h.
Otherwise looks fine to me:
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface)
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
2018-10-12 7:15 ` [PATCH 1/3] myrb: Add Mylex RAID controller (block interface) Hannes Reinecke
@ 2018-10-12 7:15 ` Hannes Reinecke
2018-10-17 7:28 ` Christoph Hellwig
2018-10-12 7:15 ` [PATCH 3/3] drivers/block: Remove DAC960 driver Hannes Reinecke
` (2 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2018-10-12 7:15 UTC (permalink / raw)
To: Jens Axboe
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block, Hannes Reinecke, Hannes Reinecke
This patch adds support for the Mylex DAC960 RAID controller,
supporting the newer, SCSI-based interface.
The driver is a re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
MAINTAINERS | 1 +
drivers/scsi/Kconfig | 15 +
drivers/scsi/Makefile | 1 +
drivers/scsi/myrs.c | 3267 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/myrs.h | 1134 +++++++++++++++++
5 files changed, 4418 insertions(+)
create mode 100644 drivers/scsi/myrs.c
create mode 100644 drivers/scsi/myrs.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f6dde2ff49b3..adc23290c28d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9897,6 +9897,7 @@ M: Hannes Reinecke <hare@kernel.org>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/myrb.*
+F: drivers/scsi/myrs.*
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
M: Chris Lee <christopher.lee@cspi.com>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f2a71bb74f48..c1d3d0d45ced 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -572,6 +572,21 @@ config SCSI_MYRB
To compile this driver as a module, choose M here: the
module will be called myrb.
+config SCSI_MYRS
+ tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
+ depends on PCI
+ select RAID_ATTRS
+ help
+ This driver adds support for the Mylex DAC960, AcceleRAID, and
+ eXtremeRAID PCI RAID controllers. This driver supports the
+ newer, SCSI-based interface only.
+ This driver is a reimplementation of the original DAC960
+ driver. If you have used the DAC960 driver you should enable
+ this module.
+
+ To compile this driver as a module, choose M here: the
+ module will be called myrs.
+
config VMWARE_PVSCSI
tristate "VMware PVSCSI driver support"
depends on PCI && SCSI && X86
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index cfd58ffc0b61..fcb41ae329c4 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
obj-$(CONFIG_SCSI_MYRB) += myrb.o
+obj-$(CONFIG_SCSI_MYRS) += myrs.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
new file mode 100644
index 000000000000..8cf0a5924290
--- /dev/null
+++ b/drivers/scsi/myrs.c
@@ -0,0 +1,3267 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
+ *
+ * This driver supports the newer, SCSI-based firmware interface only.
+ *
+ * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
+ *
+ * Based on the original DAC960 driver, which has
+ * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
+ * Portions Copyright 2002 by Mylex (An IBM Business Unit)
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/raid_class.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include "myrs.h"
+
+static struct raid_template *myrs_raid_template;
+
+static struct myrs_devstate_name_entry {
+ enum myrs_devstate state;
+ char *name;
+} myrs_devstate_name_list[] = {
+ { MYRS_DEVICE_UNCONFIGURED, "Unconfigured" },
+ { MYRS_DEVICE_ONLINE, "Online" },
+ { MYRS_DEVICE_REBUILD, "Rebuild" },
+ { MYRS_DEVICE_MISSING, "Missing" },
+ { MYRS_DEVICE_SUSPECTED_CRITICAL, "SuspectedCritical" },
+ { MYRS_DEVICE_OFFLINE, "Offline" },
+ { MYRS_DEVICE_CRITICAL, "Critical" },
+ { MYRS_DEVICE_SUSPECTED_DEAD, "SuspectedDead" },
+ { MYRS_DEVICE_COMMANDED_OFFLINE, "CommandedOffline" },
+ { MYRS_DEVICE_STANDBY, "Standby" },
+ { MYRS_DEVICE_INVALID_STATE, "Invalid" },
+};
+
+static char *myrs_devstate_name(enum myrs_devstate state)
+{
+ struct myrs_devstate_name_entry *entry = myrs_devstate_name_list;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(myrs_devstate_name_list); i++) {
+ if (entry[i].state == state)
+ return entry[i].name;
+ }
+ return NULL;
+}
+
+static struct myrs_raid_level_name_entry {
+ enum myrs_raid_level level;
+ char *name;
+} myrs_raid_level_name_list[] = {
+ { MYRS_RAID_LEVEL0, "RAID0" },
+ { MYRS_RAID_LEVEL1, "RAID1" },
+ { MYRS_RAID_LEVEL3, "RAID3 right asymmetric parity" },
+ { MYRS_RAID_LEVEL5, "RAID5 right asymmetric parity" },
+ { MYRS_RAID_LEVEL6, "RAID6" },
+ { MYRS_RAID_JBOD, "JBOD" },
+ { MYRS_RAID_NEWSPAN, "New Mylex SPAN" },
+ { MYRS_RAID_LEVEL3F, "RAID3 fixed parity" },
+ { MYRS_RAID_LEVEL3L, "RAID3 left symmetric parity" },
+ { MYRS_RAID_SPAN, "Mylex SPAN" },
+ { MYRS_RAID_LEVEL5L, "RAID5 left symmetric parity" },
+ { MYRS_RAID_LEVELE, "RAIDE (concatenation)" },
+ { MYRS_RAID_PHYSICAL, "Physical device" },
+};
+
+static char *myrs_raid_level_name(enum myrs_raid_level level)
+{
+ struct myrs_raid_level_name_entry *entry = myrs_raid_level_name_list;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(myrs_raid_level_name_list); i++) {
+ if (entry[i].level == level)
+ return entry[i].name;
+ }
+ return NULL;
+}
+
+/**
+ * myrs_reset_cmd - clears critical fields in struct myrs_cmdblk
+ */
+static inline void myrs_reset_cmd(struct myrs_cmdblk *cmd_blk)
+{
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+
+ memset(mbox, 0, sizeof(union myrs_cmd_mbox));
+ cmd_blk->status = 0;
+}
+
+/**
+ * myrs_qcmd - queues Command for DAC960 V2 Series Controllers.
+ */
+static void myrs_qcmd(struct myrs_hba *cs, struct myrs_cmdblk *cmd_blk)
+{
+ void __iomem *base = cs->io_base;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ union myrs_cmd_mbox *next_mbox = cs->next_cmd_mbox;
+
+ cs->write_cmd_mbox(next_mbox, mbox);
+
+ if (cs->prev_cmd_mbox1->words[0] == 0 ||
+ cs->prev_cmd_mbox2->words[0] == 0)
+ cs->get_cmd_mbox(base);
+
+ cs->prev_cmd_mbox2 = cs->prev_cmd_mbox1;
+ cs->prev_cmd_mbox1 = next_mbox;
+
+ if (++next_mbox > cs->last_cmd_mbox)
+ next_mbox = cs->first_cmd_mbox;
+
+ cs->next_cmd_mbox = next_mbox;
+}
+
+/**
+ * myrs_exec_cmd - executes V2 Command and waits for completion.
+ */
+static void myrs_exec_cmd(struct myrs_hba *cs,
+ struct myrs_cmdblk *cmd_blk)
+{
+ DECLARE_COMPLETION_ONSTACK(complete);
+ unsigned long flags;
+
+ cmd_blk->complete = &complete;
+ spin_lock_irqsave(&cs->queue_lock, flags);
+ myrs_qcmd(cs, cmd_blk);
+ spin_unlock_irqrestore(&cs->queue_lock, flags);
+
+ WARN_ON(in_interrupt());
+ wait_for_completion(&complete);
+}
+
+/**
+ * myrs_report_progress - prints progress message
+ */
+static void myrs_report_progress(struct myrs_hba *cs, unsigned short ldev_num,
+ unsigned char *msg, unsigned long blocks,
+ unsigned long size)
+{
+ shost_printk(KERN_INFO, cs->host,
+ "Logical Drive %d: %s in Progress: %d%% completed\n",
+ ldev_num, msg,
+ (100 * (int)(blocks >> 7)) / (int)(size >> 7));
+}
+
+/**
+ * myrs_get_ctlr_info - executes a Controller Information IOCTL Command
+ */
+static unsigned char myrs_get_ctlr_info(struct myrs_hba *cs)
+{
+ struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ dma_addr_t ctlr_info_addr;
+ union myrs_sgl *sgl;
+ unsigned char status;
+ struct myrs_ctlr_info old;
+
+ memcpy(&old, cs->ctlr_info, sizeof(struct myrs_ctlr_info));
+ ctlr_info_addr = dma_map_single(&cs->pdev->dev, cs->ctlr_info,
+ sizeof(struct myrs_ctlr_info),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&cs->pdev->dev, ctlr_info_addr))
+ return MYRS_STATUS_FAILED;
+
+ mutex_lock(&cs->dcmd_mutex);
+ myrs_reset_cmd(cmd_blk);
+ mbox->ctlr_info.id = MYRS_DCMD_TAG;
+ mbox->ctlr_info.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->ctlr_info.control.dma_ctrl_to_host = true;
+ mbox->ctlr_info.control.no_autosense = true;
+ mbox->ctlr_info.dma_size = sizeof(struct myrs_ctlr_info);
+ mbox->ctlr_info.ctlr_num = 0;
+ mbox->ctlr_info.ioctl_opcode = MYRS_IOCTL_GET_CTLR_INFO;
+ sgl = &mbox->ctlr_info.dma_addr;
+ sgl->sge[0].sge_addr = ctlr_info_addr;
+ sgl->sge[0].sge_count = mbox->ctlr_info.dma_size;
+ dev_dbg(&cs->host->shost_gendev, "Sending GetControllerInfo\n");
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ dma_unmap_single(&cs->pdev->dev, ctlr_info_addr,
+ sizeof(struct myrs_ctlr_info), DMA_FROM_DEVICE);
+ if (status == MYRS_STATUS_SUCCESS) {
+ if (cs->ctlr_info->bg_init_active +
+ cs->ctlr_info->ldev_init_active +
+ cs->ctlr_info->pdev_init_active +
+ cs->ctlr_info->cc_active +
+ cs->ctlr_info->rbld_active +
+ cs->ctlr_info->exp_active != 0)
+ cs->needs_update = true;
+ if (cs->ctlr_info->ldev_present != old.ldev_present ||
+ cs->ctlr_info->ldev_critical != old.ldev_critical ||
+ cs->ctlr_info->ldev_offline != old.ldev_offline)
+ shost_printk(KERN_INFO, cs->host,
+ "Logical drive count changes (%d/%d/%d)\n",
+ cs->ctlr_info->ldev_critical,
+ cs->ctlr_info->ldev_offline,
+ cs->ctlr_info->ldev_present);
+ }
+
+ return status;
+}
+
+/**
+ * myrs_get_ldev_info - executes a Logical Device Information IOCTL Command
+ */
+static unsigned char myrs_get_ldev_info(struct myrs_hba *cs,
+ unsigned short ldev_num, struct myrs_ldev_info *ldev_info)
+{
+ struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ dma_addr_t ldev_info_addr;
+ struct myrs_ldev_info ldev_info_orig;
+ union myrs_sgl *sgl;
+ unsigned char status;
+
+ memcpy(&ldev_info_orig, ldev_info, sizeof(struct myrs_ldev_info));
+ ldev_info_addr = dma_map_single(&cs->pdev->dev, ldev_info,
+ sizeof(struct myrs_ldev_info),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&cs->pdev->dev, ldev_info_addr))
+ return MYRS_STATUS_FAILED;
+
+ mutex_lock(&cs->dcmd_mutex);
+ myrs_reset_cmd(cmd_blk);
+ mbox->ldev_info.id = MYRS_DCMD_TAG;
+ mbox->ldev_info.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->ldev_info.control.dma_ctrl_to_host = true;
+ mbox->ldev_info.control.no_autosense = true;
+ mbox->ldev_info.dma_size = sizeof(struct myrs_ldev_info);
+ mbox->ldev_info.ldev.ldev_num = ldev_num;
+ mbox->ldev_info.ioctl_opcode = MYRS_IOCTL_GET_LDEV_INFO_VALID;
+ sgl = &mbox->ldev_info.dma_addr;
+ sgl->sge[0].sge_addr = ldev_info_addr;
+ sgl->sge[0].sge_count = mbox->ldev_info.dma_size;
+ dev_dbg(&cs->host->shost_gendev,
+ "Sending GetLogicalDeviceInfoValid for ldev %d\n", ldev_num);
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ dma_unmap_single(&cs->pdev->dev, ldev_info_addr,
+ sizeof(struct myrs_ldev_info), DMA_FROM_DEVICE);
+ if (status == MYRS_STATUS_SUCCESS) {
+ unsigned short ldev_num = ldev_info->ldev_num;
+ struct myrs_ldev_info *new = ldev_info;
+ struct myrs_ldev_info *old = &ldev_info_orig;
+ unsigned long ldev_size = new->cfg_devsize;
+
+ if (new->dev_state != old->dev_state) {
+ const char *name;
+
+ name = myrs_devstate_name(new->dev_state);
+ shost_printk(KERN_INFO, cs->host,
+ "Logical Drive %d is now %s\n",
+ ldev_num, name ? name : "Invalid");
+ }
+ if ((new->soft_errs != old->soft_errs) ||
+ (new->cmds_failed != old->cmds_failed) ||
+ (new->deferred_write_errs != old->deferred_write_errs))
+ shost_printk(KERN_INFO, cs->host,
+ "Logical Drive %d Errors: Soft = %d, Failed = %d, Deferred Write = %d\n",
+ ldev_num, new->soft_errs,
+ new->cmds_failed,
+ new->deferred_write_errs);
+ if (new->bg_init_active)
+ myrs_report_progress(cs, ldev_num,
+ "Background Initialization",
+ new->bg_init_lba, ldev_size);
+ else if (new->fg_init_active)
+ myrs_report_progress(cs, ldev_num,
+ "Foreground Initialization",
+ new->fg_init_lba, ldev_size);
+ else if (new->migration_active)
+ myrs_report_progress(cs, ldev_num,
+ "Data Migration",
+ new->migration_lba, ldev_size);
+ else if (new->patrol_active)
+ myrs_report_progress(cs, ldev_num,
+ "Patrol Operation",
+ new->patrol_lba, ldev_size);
+ if (old->bg_init_active && !new->bg_init_active)
+ shost_printk(KERN_INFO, cs->host,
+ "Logical Drive %d: Background Initialization %s\n",
+ ldev_num,
+ (new->ldev_control.ldev_init_done ?
+ "Completed" : "Failed"));
+ }
+ return status;
+}
+
+/**
+ * myrs_get_pdev_info - executes a "Read Physical Device Information" Command
+ */
+static unsigned char myrs_get_pdev_info(struct myrs_hba *cs,
+ unsigned char channel, unsigned char target, unsigned char lun,
+ struct myrs_pdev_info *pdev_info)
+{
+ struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ dma_addr_t pdev_info_addr;
+ union myrs_sgl *sgl;
+ unsigned char status;
+
+ pdev_info_addr = dma_map_single(&cs->pdev->dev, pdev_info,
+ sizeof(struct myrs_pdev_info),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&cs->pdev->dev, pdev_info_addr))
+ return MYRS_STATUS_FAILED;
+
+ mutex_lock(&cs->dcmd_mutex);
+ myrs_reset_cmd(cmd_blk);
+ mbox->pdev_info.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->pdev_info.id = MYRS_DCMD_TAG;
+ mbox->pdev_info.control.dma_ctrl_to_host = true;
+ mbox->pdev_info.control.no_autosense = true;
+ mbox->pdev_info.dma_size = sizeof(struct myrs_pdev_info);
+ mbox->pdev_info.pdev.lun = lun;
+ mbox->pdev_info.pdev.target = target;
+ mbox->pdev_info.pdev.channel = channel;
+ mbox->pdev_info.ioctl_opcode = MYRS_IOCTL_GET_PDEV_INFO_VALID;
+ sgl = &mbox->pdev_info.dma_addr;
+ sgl->sge[0].sge_addr = pdev_info_addr;
+ sgl->sge[0].sge_count = mbox->pdev_info.dma_size;
+ dev_dbg(&cs->host->shost_gendev,
+ "Sending GetPhysicalDeviceInfoValid for pdev %d:%d:%d\n",
+ channel, target, lun);
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ dma_unmap_single(&cs->pdev->dev, pdev_info_addr,
+ sizeof(struct myrs_pdev_info), DMA_FROM_DEVICE);
+ return status;
+}
+
+/**
+ * myrs_dev_op - executes a "Device Operation" Command
+ */
+static unsigned char myrs_dev_op(struct myrs_hba *cs,
+ enum myrs_ioctl_opcode opcode, enum myrs_opdev opdev)
+{
+ struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ unsigned char status;
+
+ mutex_lock(&cs->dcmd_mutex);
+ myrs_reset_cmd(cmd_blk);
+ mbox->dev_op.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->dev_op.id = MYRS_DCMD_TAG;
+ mbox->dev_op.control.dma_ctrl_to_host = true;
+ mbox->dev_op.control.no_autosense = true;
+ mbox->dev_op.ioctl_opcode = opcode;
+ mbox->dev_op.opdev = opdev;
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ return status;
+}
+
+/**
+ * myrs_translate_pdev - translates a Physical Device Channel and
+ * TargetID into a Logical Device.
+ */
+static unsigned char myrs_translate_pdev(struct myrs_hba *cs,
+ unsigned char channel, unsigned char target, unsigned char lun,
+ struct myrs_devmap *devmap)
+{
+ struct pci_dev *pdev = cs->pdev;
+ dma_addr_t devmap_addr;
+ struct myrs_cmdblk *cmd_blk;
+ union myrs_cmd_mbox *mbox;
+ union myrs_sgl *sgl;
+ unsigned char status;
+
+ memset(devmap, 0x0, sizeof(struct myrs_devmap));
+ devmap_addr = dma_map_single(&pdev->dev, devmap,
+ sizeof(struct myrs_devmap),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, devmap_addr))
+ return MYRS_STATUS_FAILED;
+
+ mutex_lock(&cs->dcmd_mutex);
+ cmd_blk = &cs->dcmd_blk;
+ mbox = &cmd_blk->mbox;
+ mbox->pdev_info.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->pdev_info.control.dma_ctrl_to_host = true;
+ mbox->pdev_info.control.no_autosense = true;
+ mbox->pdev_info.dma_size = sizeof(struct myrs_devmap);
+ mbox->pdev_info.pdev.target = target;
+ mbox->pdev_info.pdev.channel = channel;
+ mbox->pdev_info.pdev.lun = lun;
+ mbox->pdev_info.ioctl_opcode = MYRS_IOCTL_XLATE_PDEV_TO_LDEV;
+ sgl = &mbox->pdev_info.dma_addr;
+ sgl->sge[0].sge_addr = devmap_addr;
+ sgl->sge[0].sge_count = mbox->pdev_info.dma_size;
+
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ dma_unmap_single(&pdev->dev, devmap_addr,
+ sizeof(struct myrs_devmap), DMA_FROM_DEVICE);
+ return status;
+}
+
+/**
+ * myrs_get_event - executes a Get Event Command
+ */
+static unsigned char myrs_get_event(struct myrs_hba *cs,
+ unsigned int event_num, struct myrs_event *event_buf)
+{
+ struct pci_dev *pdev = cs->pdev;
+ dma_addr_t event_addr;
+ struct myrs_cmdblk *cmd_blk = &cs->mcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ union myrs_sgl *sgl;
+ unsigned char status;
+
+ event_addr = dma_map_single(&pdev->dev, event_buf,
+ sizeof(struct myrs_event), DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, event_addr))
+ return MYRS_STATUS_FAILED;
+
+ mbox->get_event.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->get_event.dma_size = sizeof(struct myrs_event);
+ mbox->get_event.evnum_upper = event_num >> 16;
+ mbox->get_event.ctlr_num = 0;
+ mbox->get_event.ioctl_opcode = MYRS_IOCTL_GET_EVENT;
+ mbox->get_event.evnum_lower = event_num & 0xFFFF;
+ sgl = &mbox->get_event.dma_addr;
+ sgl->sge[0].sge_addr = event_addr;
+ sgl->sge[0].sge_count = mbox->get_event.dma_size;
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ dma_unmap_single(&pdev->dev, event_addr,
+ sizeof(struct myrs_event), DMA_FROM_DEVICE);
+
+ return status;
+}
+
+/*
+ * myrs_get_fwstatus - executes a Get Health Status Command
+ */
+static unsigned char myrs_get_fwstatus(struct myrs_hba *cs)
+{
+ struct myrs_cmdblk *cmd_blk = &cs->mcmd_blk;
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ union myrs_sgl *sgl;
+ unsigned char status = cmd_blk->status;
+
+ myrs_reset_cmd(cmd_blk);
+ mbox->common.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->common.id = MYRS_MCMD_TAG;
+ mbox->common.control.dma_ctrl_to_host = true;
+ mbox->common.control.no_autosense = true;
+ mbox->common.dma_size = sizeof(struct myrs_fwstat);
+ mbox->common.ioctl_opcode = MYRS_IOCTL_GET_HEALTH_STATUS;
+ sgl = &mbox->common.dma_addr;
+ sgl->sge[0].sge_addr = cs->fwstat_addr;
+ sgl->sge[0].sge_count = mbox->ctlr_info.dma_size;
+ dev_dbg(&cs->host->shost_gendev, "Sending GetHealthStatus\n");
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+
+ return status;
+}
+
+/**
+ * myrs_enable_mmio_mbox - enables the Memory Mailbox Interface
+ */
+static bool myrs_enable_mmio_mbox(struct myrs_hba *cs,
+ enable_mbox_t enable_mbox_fn)
+{
+ void __iomem *base = cs->io_base;
+ struct pci_dev *pdev = cs->pdev;
+ union myrs_cmd_mbox *cmd_mbox;
+ struct myrs_stat_mbox *stat_mbox;
+ union myrs_cmd_mbox *mbox;
+ dma_addr_t mbox_addr;
+ unsigned char status = MYRS_STATUS_FAILED;
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_err(&pdev->dev, "DMA mask out of range\n");
+ return false;
+ }
+
+ /* Temporary dma mapping, used only in the scope of this function */
+ mbox = dma_alloc_coherent(&pdev->dev, sizeof(union myrs_cmd_mbox),
+ &mbox_addr, GFP_KERNEL);
+ if (dma_mapping_error(&pdev->dev, mbox_addr))
+ return false;
+
+ /* These are the base addresses for the command memory mailbox array */
+ cs->cmd_mbox_size = MYRS_MAX_CMD_MBOX * sizeof(union myrs_cmd_mbox);
+ cmd_mbox = dma_alloc_coherent(&pdev->dev, cs->cmd_mbox_size,
+ &cs->cmd_mbox_addr, GFP_KERNEL);
+ if (dma_mapping_error(&pdev->dev, cs->cmd_mbox_addr)) {
+ dev_err(&pdev->dev, "Failed to map command mailbox\n");
+ goto out_free;
+ }
+ cs->first_cmd_mbox = cmd_mbox;
+ cmd_mbox += MYRS_MAX_CMD_MBOX - 1;
+ cs->last_cmd_mbox = cmd_mbox;
+ cs->next_cmd_mbox = cs->first_cmd_mbox;
+ cs->prev_cmd_mbox1 = cs->last_cmd_mbox;
+ cs->prev_cmd_mbox2 = cs->last_cmd_mbox - 1;
+
+ /* These are the base addresses for the status memory mailbox array */
+ cs->stat_mbox_size = MYRS_MAX_STAT_MBOX * sizeof(struct myrs_stat_mbox);
+ stat_mbox = dma_alloc_coherent(&pdev->dev, cs->stat_mbox_size,
+ &cs->stat_mbox_addr, GFP_KERNEL);
+ if (dma_mapping_error(&pdev->dev, cs->stat_mbox_addr)) {
+ dev_err(&pdev->dev, "Failed to map status mailbox\n");
+ goto out_free;
+ }
+
+ cs->first_stat_mbox = stat_mbox;
+ stat_mbox += MYRS_MAX_STAT_MBOX - 1;
+ cs->last_stat_mbox = stat_mbox;
+ cs->next_stat_mbox = cs->first_stat_mbox;
+
+ cs->fwstat_buf = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct myrs_fwstat),
+ &cs->fwstat_addr, GFP_KERNEL);
+ if (dma_mapping_error(&pdev->dev, cs->fwstat_addr)) {
+ dev_err(&pdev->dev, "Failed to map firmware health buffer\n");
+ cs->fwstat_buf = NULL;
+ goto out_free;
+ }
+ cs->ctlr_info = kzalloc(sizeof(struct myrs_ctlr_info),
+ GFP_KERNEL | GFP_DMA);
+ if (!cs->ctlr_info)
+ goto out_free;
+
+ cs->event_buf = kzalloc(sizeof(struct myrs_event),
+ GFP_KERNEL | GFP_DMA);
+ if (!cs->event_buf)
+ goto out_free;
+
+ /* Enable the Memory Mailbox Interface. */
+ memset(mbox, 0, sizeof(union myrs_cmd_mbox));
+ mbox->set_mbox.id = 1;
+ mbox->set_mbox.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->set_mbox.control.no_autosense = true;
+ mbox->set_mbox.first_cmd_mbox_size_kb =
+ (MYRS_MAX_CMD_MBOX * sizeof(union myrs_cmd_mbox)) >> 10;
+ mbox->set_mbox.first_stat_mbox_size_kb =
+ (MYRS_MAX_STAT_MBOX * sizeof(struct myrs_stat_mbox)) >> 10;
+ mbox->set_mbox.second_cmd_mbox_size_kb = 0;
+ mbox->set_mbox.second_stat_mbox_size_kb = 0;
+ mbox->set_mbox.sense_len = 0;
+ mbox->set_mbox.ioctl_opcode = MYRS_IOCTL_SET_MEM_MBOX;
+ mbox->set_mbox.fwstat_buf_size_kb = 1;
+ mbox->set_mbox.fwstat_buf_addr = cs->fwstat_addr;
+ mbox->set_mbox.first_cmd_mbox_addr = cs->cmd_mbox_addr;
+ mbox->set_mbox.first_stat_mbox_addr = cs->stat_mbox_addr;
+ status = enable_mbox_fn(base, mbox_addr);
+
+out_free:
+ dma_free_coherent(&pdev->dev, sizeof(union myrs_cmd_mbox),
+ mbox, mbox_addr);
+ if (status != MYRS_STATUS_SUCCESS)
+ dev_err(&pdev->dev, "Failed to enable mailbox, status %X\n",
+ status);
+ return (status == MYRS_STATUS_SUCCESS);
+}
+
+/**
+ * myrs_get_config - reads the Configuration Information
+ */
+static int myrs_get_config(struct myrs_hba *cs)
+{
+ struct myrs_ctlr_info *info = cs->ctlr_info;
+ struct Scsi_Host *shost = cs->host;
+ unsigned char status;
+ unsigned char model[20];
+ unsigned char fw_version[12];
+ int i, model_len;
+
+ /* Get data into dma-able area, then copy into permanent location */
+ mutex_lock(&cs->cinfo_mutex);
+ status = myrs_get_ctlr_info(cs);
+ mutex_unlock(&cs->cinfo_mutex);
+ if (status != MYRS_STATUS_SUCCESS) {
+ shost_printk(KERN_ERR, shost,
+ "Failed to get controller information\n");
+ return -ENODEV;
+ }
+
+ /* Initialize the Controller Model Name and Full Model Name fields. */
+ model_len = sizeof(info->ctlr_name);
+ if (model_len > sizeof(model)-1)
+ model_len = sizeof(model)-1;
+ memcpy(model, info->ctlr_name, model_len);
+ model_len--;
+ while (model[model_len] == ' ' || model[model_len] == '\0')
+ model_len--;
+ model[++model_len] = '\0';
+ strcpy(cs->model_name, "DAC960 ");
+ strcat(cs->model_name, model);
+ /* Initialize the Controller Firmware Version field. */
+ sprintf(fw_version, "%d.%02d-%02d",
+ info->fw_major_version, info->fw_minor_version,
+ info->fw_turn_number);
+ if (info->fw_major_version == 6 &&
+ info->fw_minor_version == 0 &&
+ info->fw_turn_number < 1) {
+ shost_printk(KERN_WARNING, shost,
+ "FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n"
+ "STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n"
+ "PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
+ fw_version);
+ return -ENODEV;
+ }
+ /* Initialize the Controller Channels and Targets. */
+ shost->max_channel = info->physchan_present + info->virtchan_present;
+ shost->max_id = info->max_targets[0];
+ for (i = 1; i < 16; i++) {
+ if (!info->max_targets[i])
+ continue;
+ if (shost->max_id < info->max_targets[i])
+ shost->max_id = info->max_targets[i];
+ }
+
+ /*
+ * Initialize the Controller Queue Depth, Driver Queue Depth,
+ * Logical Drive Count, Maximum Blocks per Command, Controller
+ * Scatter/Gather Limit, and Driver Scatter/Gather Limit.
+ * The Driver Queue Depth must be at most three less than
+ * the Controller Queue Depth; tag '1' is reserved for
+ * direct commands, and tag '2' for monitoring commands.
+ */
+ shost->can_queue = info->max_tcq - 3;
+ if (shost->can_queue > MYRS_MAX_CMD_MBOX - 3)
+ shost->can_queue = MYRS_MAX_CMD_MBOX - 3;
+ shost->max_sectors = info->max_transfer_size;
+ shost->sg_tablesize = info->max_sge;
+ if (shost->sg_tablesize > MYRS_SG_LIMIT)
+ shost->sg_tablesize = MYRS_SG_LIMIT;
+
+ shost_printk(KERN_INFO, shost,
+ "Configuring %s PCI RAID Controller\n", model);
+ shost_printk(KERN_INFO, shost,
+ " Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
+ fw_version, info->physchan_present, info->mem_size_mb);
+
+ shost_printk(KERN_INFO, shost,
+ " Controller Queue Depth: %d, Maximum Blocks per Command: %d\n",
+ shost->can_queue, shost->max_sectors);
+
+ shost_printk(KERN_INFO, shost,
+ " Driver Queue Depth: %d, Scatter/Gather Limit: %d of %d Segments\n",
+ shost->can_queue, shost->sg_tablesize, MYRS_SG_LIMIT);
+ for (i = 0; i < info->physchan_max; i++) {
+ if (!info->max_targets[i])
+ continue;
+ shost_printk(KERN_INFO, shost,
+ " Device Channel %d: max %d devices\n",
+ i, info->max_targets[i]);
+ }
+ shost_printk(KERN_INFO, shost,
+ " Physical: %d/%d channels, %d disks, %d devices\n",
+ info->physchan_present, info->physchan_max,
+ info->pdisk_present, info->pdev_present);
+
+ shost_printk(KERN_INFO, shost,
+ " Logical: %d/%d channels, %d disks\n",
+ info->virtchan_present, info->virtchan_max,
+ info->ldev_present);
+ return 0;
+}
+
+/**
+ * myrs_log_event - prints a Controller Event message
+ */
+static struct {
+ int ev_code;
+ unsigned char *ev_msg;
+} myrs_ev_list[] = {
+ /* Physical Device Events (0x0000 - 0x007F) */
+ { 0x0001, "P Online" },
+ { 0x0002, "P Standby" },
+ { 0x0005, "P Automatic Rebuild Started" },
+ { 0x0006, "P Manual Rebuild Started" },
+ { 0x0007, "P Rebuild Completed" },
+ { 0x0008, "P Rebuild Cancelled" },
+ { 0x0009, "P Rebuild Failed for Unknown Reasons" },
+ { 0x000A, "P Rebuild Failed due to New Physical Device" },
+ { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
+ { 0x000C, "S Offline" },
+ { 0x000D, "P Found" },
+ { 0x000E, "P Removed" },
+ { 0x000F, "P Unconfigured" },
+ { 0x0010, "P Expand Capacity Started" },
+ { 0x0011, "P Expand Capacity Completed" },
+ { 0x0012, "P Expand Capacity Failed" },
+ { 0x0013, "P Command Timed Out" },
+ { 0x0014, "P Command Aborted" },
+ { 0x0015, "P Command Retried" },
+ { 0x0016, "P Parity Error" },
+ { 0x0017, "P Soft Error" },
+ { 0x0018, "P Miscellaneous Error" },
+ { 0x0019, "P Reset" },
+ { 0x001A, "P Active Spare Found" },
+ { 0x001B, "P Warm Spare Found" },
+ { 0x001C, "S Sense Data Received" },
+ { 0x001D, "P Initialization Started" },
+ { 0x001E, "P Initialization Completed" },
+ { 0x001F, "P Initialization Failed" },
+ { 0x0020, "P Initialization Cancelled" },
+ { 0x0021, "P Failed because Write Recovery Failed" },
+ { 0x0022, "P Failed because SCSI Bus Reset Failed" },
+ { 0x0023, "P Failed because of Double Check Condition" },
+ { 0x0024, "P Failed because Device Cannot Be Accessed" },
+ { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
+ { 0x0026, "P Failed because of Bad Tag from Device" },
+ { 0x0027, "P Failed because of Command Timeout" },
+ { 0x0028, "P Failed because of System Reset" },
+ { 0x0029, "P Failed because of Busy Status or Parity Error" },
+ { 0x002A, "P Failed because Host Set Device to Failed State" },
+ { 0x002B, "P Failed because of Selection Timeout" },
+ { 0x002C, "P Failed because of SCSI Bus Phase Error" },
+ { 0x002D, "P Failed because Device Returned Unknown Status" },
+ { 0x002E, "P Failed because Device Not Ready" },
+ { 0x002F, "P Failed because Device Not Found at Startup" },
+ { 0x0030, "P Failed because COD Write Operation Failed" },
+ { 0x0031, "P Failed because BDT Write Operation Failed" },
+ { 0x0039, "P Missing at Startup" },
+ { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
+ { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
+ { 0x003D, "P Standby Rebuild Started" },
+ /* Logical Device Events (0x0080 - 0x00FF) */
+ { 0x0080, "M Consistency Check Started" },
+ { 0x0081, "M Consistency Check Completed" },
+ { 0x0082, "M Consistency Check Cancelled" },
+ { 0x0083, "M Consistency Check Completed With Errors" },
+ { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
+ { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
+ { 0x0086, "L Offline" },
+ { 0x0087, "L Critical" },
+ { 0x0088, "L Online" },
+ { 0x0089, "M Automatic Rebuild Started" },
+ { 0x008A, "M Manual Rebuild Started" },
+ { 0x008B, "M Rebuild Completed" },
+ { 0x008C, "M Rebuild Cancelled" },
+ { 0x008D, "M Rebuild Failed for Unknown Reasons" },
+ { 0x008E, "M Rebuild Failed due to New Physical Device" },
+ { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
+ { 0x0090, "M Initialization Started" },
+ { 0x0091, "M Initialization Completed" },
+ { 0x0092, "M Initialization Cancelled" },
+ { 0x0093, "M Initialization Failed" },
+ { 0x0094, "L Found" },
+ { 0x0095, "L Deleted" },
+ { 0x0096, "M Expand Capacity Started" },
+ { 0x0097, "M Expand Capacity Completed" },
+ { 0x0098, "M Expand Capacity Failed" },
+ { 0x0099, "L Bad Block Found" },
+ { 0x009A, "L Size Changed" },
+ { 0x009B, "L Type Changed" },
+ { 0x009C, "L Bad Data Block Found" },
+ { 0x009E, "L Read of Data Block in BDT" },
+ { 0x009F, "L Write Back Data for Disk Block Lost" },
+ { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
+ { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
+ { 0x00A2, "L Standby Rebuild Started" },
+ /* Fault Management Events (0x0100 - 0x017F) */
+ { 0x0140, "E Fan %d Failed" },
+ { 0x0141, "E Fan %d OK" },
+ { 0x0142, "E Fan %d Not Present" },
+ { 0x0143, "E Power Supply %d Failed" },
+ { 0x0144, "E Power Supply %d OK" },
+ { 0x0145, "E Power Supply %d Not Present" },
+ { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
+ { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
+ { 0x0148, "E Temperature Sensor %d Temperature Normal" },
+ { 0x0149, "E Temperature Sensor %d Not Present" },
+ { 0x014A, "E Enclosure Management Unit %d Access Critical" },
+ { 0x014B, "E Enclosure Management Unit %d Access OK" },
+ { 0x014C, "E Enclosure Management Unit %d Access Offline" },
+ /* Controller Events (0x0180 - 0x01FF) */
+ { 0x0181, "C Cache Write Back Error" },
+ { 0x0188, "C Battery Backup Unit Found" },
+ { 0x0189, "C Battery Backup Unit Charge Level Low" },
+ { 0x018A, "C Battery Backup Unit Charge Level OK" },
+ { 0x0193, "C Installation Aborted" },
+ { 0x0195, "C Battery Backup Unit Physically Removed" },
+ { 0x0196, "C Memory Error During Warm Boot" },
+ { 0x019E, "C Memory Soft ECC Error Corrected" },
+ { 0x019F, "C Memory Hard ECC Error Corrected" },
+ { 0x01A2, "C Battery Backup Unit Failed" },
+ { 0x01AB, "C Mirror Race Recovery Failed" },
+ { 0x01AC, "C Mirror Race on Critical Drive" },
+ /* Controller Internal Processor Events */
+ { 0x0380, "C Internal Controller Hung" },
+ { 0x0381, "C Internal Controller Firmware Breakpoint" },
+ { 0x0390, "C Internal Controller i960 Processor Specific Error" },
+ { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
+ { 0, "" }
+};
+
+static void myrs_log_event(struct myrs_hba *cs, struct myrs_event *ev)
+{
+ unsigned char msg_buf[MYRS_LINE_BUFFER_SIZE];
+ int ev_idx = 0, ev_code;
+ unsigned char ev_type, *ev_msg;
+ struct Scsi_Host *shost = cs->host;
+ struct scsi_device *sdev;
+ struct scsi_sense_hdr sshdr;
+ unsigned char sense_info[4];
+ unsigned char cmd_specific[4];
+
+ if (ev->ev_code == 0x1C) {
+ if (!scsi_normalize_sense(ev->sense_data, 40, &sshdr)) {
+ memset(&sshdr, 0x0, sizeof(sshdr));
+ memset(sense_info, 0x0, sizeof(sense_info));
+ memset(cmd_specific, 0x0, sizeof(cmd_specific));
+ } else {
+ memcpy(sense_info, &ev->sense_data[3], 4);
+ memcpy(cmd_specific, &ev->sense_data[7], 4);
+ }
+ }
+ if (sshdr.sense_key == VENDOR_SPECIFIC &&
+ (sshdr.asc == 0x80 || sshdr.asc == 0x81))
+ ev->ev_code = ((sshdr.asc - 0x80) << 8 | sshdr.ascq);
+ while (true) {
+ ev_code = myrs_ev_list[ev_idx].ev_code;
+ if (ev_code == ev->ev_code || ev_code == 0)
+ break;
+ ev_idx++;
+ }
+ ev_type = myrs_ev_list[ev_idx].ev_msg[0];
+ ev_msg = &myrs_ev_list[ev_idx].ev_msg[2];
+ if (ev_code == 0) {
+ shost_printk(KERN_WARNING, shost,
+ "Unknown Controller Event Code %04X\n",
+ ev->ev_code);
+ return;
+ }
+ switch (ev_type) {
+ case 'P':
+ sdev = scsi_device_lookup(shost, ev->channel,
+ ev->target, 0);
+ sdev_printk(KERN_INFO, sdev, "event %d: Physical Device %s\n",
+ ev->ev_seq, ev_msg);
+ if (sdev && sdev->hostdata &&
+ sdev->channel < cs->ctlr_info->physchan_present) {
+ struct myrs_pdev_info *pdev_info = sdev->hostdata;
+
+ switch (ev->ev_code) {
+ case 0x0001:
+ case 0x0007:
+ pdev_info->dev_state = MYRS_DEVICE_ONLINE;
+ break;
+ case 0x0002:
+ pdev_info->dev_state = MYRS_DEVICE_STANDBY;
+ break;
+ case 0x000C:
+ pdev_info->dev_state = MYRS_DEVICE_OFFLINE;
+ break;
+ case 0x000E:
+ pdev_info->dev_state = MYRS_DEVICE_MISSING;
+ break;
+ case 0x000F:
+ pdev_info->dev_state = MYRS_DEVICE_UNCONFIGURED;
+ break;
+ }
+ }
+ break;
+ case 'L':
+ shost_printk(KERN_INFO, shost,
+ "event %d: Logical Drive %d %s\n",
+ ev->ev_seq, ev->lun, ev_msg);
+ cs->needs_update = true;
+ break;
+ case 'M':
+ shost_printk(KERN_INFO, shost,
+ "event %d: Logical Drive %d %s\n",
+ ev->ev_seq, ev->lun, ev_msg);
+ cs->needs_update = true;
+ break;
+ case 'S':
+ if (sshdr.sense_key == NO_SENSE ||
+ (sshdr.sense_key == NOT_READY &&
+ sshdr.asc == 0x04 && (sshdr.ascq == 0x01 ||
+ sshdr.ascq == 0x02)))
+ break;
+ shost_printk(KERN_INFO, shost,
+ "event %d: Physical Device %d:%d %s\n",
+ ev->ev_seq, ev->channel, ev->target, ev_msg);
+ shost_printk(KERN_INFO, shost,
+ "Physical Device %d:%d Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
+ ev->channel, ev->target,
+ sshdr.sense_key, sshdr.asc, sshdr.ascq);
+ shost_printk(KERN_INFO, shost,
+ "Physical Device %d:%d Sense Information = %02X%02X%02X%02X %02X%02X%02X%02X\n",
+ ev->channel, ev->target,
+ sense_info[0], sense_info[1],
+ sense_info[2], sense_info[3],
+ cmd_specific[0], cmd_specific[1],
+ cmd_specific[2], cmd_specific[3]);
+ break;
+ case 'E':
+ if (cs->disable_enc_msg)
+ break;
+ sprintf(msg_buf, ev_msg, ev->lun);
+ shost_printk(KERN_INFO, shost, "event %d: Enclosure %d %s\n",
+ ev->ev_seq, ev->target, msg_buf);
+ break;
+ case 'C':
+ shost_printk(KERN_INFO, shost, "event %d: Controller %s\n",
+ ev->ev_seq, ev_msg);
+ break;
+ default:
+ shost_printk(KERN_INFO, shost,
+ "event %d: Unknown Event Code %04X\n",
+ ev->ev_seq, ev->ev_code);
+ break;
+ }
+}
+
+/*
+ * SCSI sysfs interface functions
+ */
+static ssize_t raid_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ int ret;
+
+ if (!sdev->hostdata)
+ return snprintf(buf, 16, "Unknown\n");
+
+ if (sdev->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+ const char *name;
+
+ name = myrs_devstate_name(ldev_info->dev_state);
+ if (name)
+ ret = snprintf(buf, 32, "%s\n", name);
+ else
+ ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ldev_info->dev_state);
+ } else {
+ struct myrs_pdev_info *pdev_info;
+ const char *name;
+
+ pdev_info = sdev->hostdata;
+ name = myrs_devstate_name(pdev_info->dev_state);
+ if (name)
+ ret = snprintf(buf, 32, "%s\n", name);
+ else
+ ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ pdev_info->dev_state);
+ }
+ return ret;
+}
+
+static ssize_t raid_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_cmdblk *cmd_blk;
+ union myrs_cmd_mbox *mbox;
+ enum myrs_devstate new_state;
+ unsigned short ldev_num;
+ unsigned char status;
+
+ if (!strncmp(buf, "offline", 7) ||
+ !strncmp(buf, "kill", 4))
+ new_state = MYRS_DEVICE_OFFLINE;
+ else if (!strncmp(buf, "online", 6))
+ new_state = MYRS_DEVICE_ONLINE;
+ else if (!strncmp(buf, "standby", 7))
+ new_state = MYRS_DEVICE_STANDBY;
+ else
+ return -EINVAL;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present) {
+ struct myrs_pdev_info *pdev_info = sdev->hostdata;
+ struct myrs_devmap *pdev_devmap =
+ (struct myrs_devmap *)&pdev_info->rsvd13;
+
+ if (pdev_info->dev_state == new_state) {
+ sdev_printk(KERN_INFO, sdev,
+ "Device already in %s\n",
+ myrs_devstate_name(new_state));
+ return count;
+ }
+ status = myrs_translate_pdev(cs, sdev->channel, sdev->id,
+ sdev->lun, pdev_devmap);
+ if (status != MYRS_STATUS_SUCCESS)
+ return -ENXIO;
+ ldev_num = pdev_devmap->ldev_num;
+ } else {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+
+ if (ldev_info->dev_state == new_state) {
+ sdev_printk(KERN_INFO, sdev,
+ "Device already in %s\n",
+ myrs_devstate_name(new_state));
+ return count;
+ }
+ ldev_num = ldev_info->ldev_num;
+ }
+ mutex_lock(&cs->dcmd_mutex);
+ cmd_blk = &cs->dcmd_blk;
+ myrs_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->common.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->common.id = MYRS_DCMD_TAG;
+ mbox->common.control.dma_ctrl_to_host = true;
+ mbox->common.control.no_autosense = true;
+ mbox->set_devstate.ioctl_opcode = MYRS_IOCTL_SET_DEVICE_STATE;
+ mbox->set_devstate.state = new_state;
+ mbox->set_devstate.ldev.ldev_num = ldev_num;
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ if (status == MYRS_STATUS_SUCCESS) {
+ if (sdev->channel < cs->ctlr_info->physchan_present) {
+ struct myrs_pdev_info *pdev_info = sdev->hostdata;
+
+ pdev_info->dev_state = new_state;
+ } else {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+
+ ldev_info->dev_state = new_state;
+ }
+ sdev_printk(KERN_INFO, sdev,
+ "Set device state to %s\n",
+ myrs_devstate_name(new_state));
+ return count;
+ }
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to set device state to %s, status 0x%02x\n",
+ myrs_devstate_name(new_state), status);
+ return -EINVAL;
+}
+static DEVICE_ATTR_RW(raid_state);
+
+static ssize_t raid_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ const char *name = NULL;
+
+ if (!sdev->hostdata)
+ return snprintf(buf, 16, "Unknown\n");
+
+ if (sdev->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info;
+
+ ldev_info = sdev->hostdata;
+ name = myrs_raid_level_name(ldev_info->raid_level);
+ if (!name)
+ return snprintf(buf, 32, "Invalid (%02X)\n",
+ ldev_info->dev_state);
+
+ } else
+ name = myrs_raid_level_name(MYRS_RAID_PHYSICAL);
+
+ return snprintf(buf, 32, "%s\n", name);
+}
+static DEVICE_ATTR_RO(raid_level);
+
+static ssize_t rebuild_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info;
+ unsigned short ldev_num;
+ unsigned char status;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present)
+ return snprintf(buf, 32, "physical device - not rebuilding\n");
+
+ ldev_info = sdev->hostdata;
+ ldev_num = ldev_info->ldev_num;
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to get device information, status 0x%02x\n",
+ status);
+ return -EIO;
+ }
+ if (ldev_info->rbld_active) {
+ return snprintf(buf, 32, "rebuilding block %zu of %zu\n",
+ (size_t)ldev_info->rbld_lba,
+ (size_t)ldev_info->cfg_devsize);
+ } else
+ return snprintf(buf, 32, "not rebuilding\n");
+}
+
+static ssize_t rebuild_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info;
+ struct myrs_cmdblk *cmd_blk;
+ union myrs_cmd_mbox *mbox;
+ unsigned short ldev_num;
+ unsigned char status;
+ int rebuild, ret;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present)
+ return -EINVAL;
+
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ return -ENXIO;
+ ldev_num = ldev_info->ldev_num;
+
+ ret = kstrtoint(buf, 0, &rebuild);
+ if (ret)
+ return ret;
+
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to get device information, status 0x%02x\n",
+ status);
+ return -EIO;
+ }
+
+ if (rebuild && ldev_info->rbld_active) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not Initiated; already in progress\n");
+ return -EALREADY;
+ }
+ if (!rebuild && !ldev_info->rbld_active) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not Cancelled; no rebuild in progress\n");
+ return count;
+ }
+
+ mutex_lock(&cs->dcmd_mutex);
+ cmd_blk = &cs->dcmd_blk;
+ myrs_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->common.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->common.id = MYRS_DCMD_TAG;
+ mbox->common.control.dma_ctrl_to_host = true;
+ mbox->common.control.no_autosense = true;
+ if (rebuild) {
+ mbox->ldev_info.ldev.ldev_num = ldev_num;
+ mbox->ldev_info.ioctl_opcode = MYRS_IOCTL_RBLD_DEVICE_START;
+ } else {
+ mbox->ldev_info.ldev.ldev_num = ldev_num;
+ mbox->ldev_info.ioctl_opcode = MYRS_IOCTL_RBLD_DEVICE_STOP;
+ }
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ if (status) {
+ sdev_printk(KERN_INFO, sdev,
+ "Rebuild Not %s, status 0x%02x\n",
+ rebuild ? "Initiated" : "Cancelled", status);
+ ret = -EIO;
+ } else {
+ sdev_printk(KERN_INFO, sdev, "Rebuild %s\n",
+ rebuild ? "Initiated" : "Cancelled");
+ ret = count;
+ }
+
+ return ret;
+}
+static DEVICE_ATTR_RW(rebuild);
+
+static ssize_t consistency_check_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info;
+ unsigned short ldev_num;
+ unsigned char status;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present)
+ return snprintf(buf, 32, "physical device - not checking\n");
+
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ return -ENXIO;
+ ldev_num = ldev_info->ldev_num;
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ if (ldev_info->cc_active)
+ return snprintf(buf, 32, "checking block %zu of %zu\n",
+ (size_t)ldev_info->cc_lba,
+ (size_t)ldev_info->cfg_devsize);
+ else
+ return snprintf(buf, 32, "not checking\n");
+}
+
+static ssize_t consistency_check_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info;
+ struct myrs_cmdblk *cmd_blk;
+ union myrs_cmd_mbox *mbox;
+ unsigned short ldev_num;
+ unsigned char status;
+ int check, ret;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present)
+ return -EINVAL;
+
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ return -ENXIO;
+ ldev_num = ldev_info->ldev_num;
+
+ ret = kstrtoint(buf, 0, &check);
+ if (ret)
+ return ret;
+
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Failed to get device information, status 0x%02x\n",
+ status);
+ return -EIO;
+ }
+ if (check && ldev_info->cc_active) {
+ sdev_printk(KERN_INFO, sdev,
+ "Consistency Check Not Initiated; "
+ "already in progress\n");
+ return -EALREADY;
+ }
+ if (!check && !ldev_info->cc_active) {
+ sdev_printk(KERN_INFO, sdev,
+ "Consistency Check Not Cancelled; "
+ "check not in progress\n");
+ return count;
+ }
+
+ mutex_lock(&cs->dcmd_mutex);
+ cmd_blk = &cs->dcmd_blk;
+ myrs_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->common.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->common.id = MYRS_DCMD_TAG;
+ mbox->common.control.dma_ctrl_to_host = true;
+ mbox->common.control.no_autosense = true;
+ if (check) {
+ mbox->cc.ldev.ldev_num = ldev_num;
+ mbox->cc.ioctl_opcode = MYRS_IOCTL_CC_START;
+ mbox->cc.restore_consistency = true;
+ mbox->cc.initialized_area_only = false;
+ } else {
+ mbox->cc.ldev.ldev_num = ldev_num;
+ mbox->cc.ioctl_opcode = MYRS_IOCTL_CC_STOP;
+ }
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev_printk(KERN_INFO, sdev,
+ "Consistency Check Not %s, status 0x%02x\n",
+ check ? "Initiated" : "Cancelled", status);
+ ret = -EIO;
+ } else {
+ sdev_printk(KERN_INFO, sdev, "Consistency Check %s\n",
+ check ? "Initiated" : "Cancelled");
+ ret = count;
+ }
+
+ return ret;
+}
+static DEVICE_ATTR_RW(consistency_check);
+
+static struct device_attribute *myrs_sdev_attrs[] = {
+ &dev_attr_consistency_check,
+ &dev_attr_rebuild,
+ &dev_attr_raid_state,
+ &dev_attr_raid_level,
+ NULL,
+};
+
+static ssize_t serial_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+ char serial[17];
+
+ memcpy(serial, cs->ctlr_info->serial_number, 16);
+ serial[16] = '\0';
+ return snprintf(buf, 16, "%s\n", serial);
+}
+static DEVICE_ATTR_RO(serial);
+
+static ssize_t ctlr_num_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 20, "%d\n", cs->host->host_no);
+}
+static DEVICE_ATTR_RO(ctlr_num);
+
+static struct myrs_cpu_type_tbl {
+ enum myrs_cpu_type type;
+ char *name;
+} myrs_cpu_type_names[] = {
+ { MYRS_CPUTYPE_i960CA, "i960CA" },
+ { MYRS_CPUTYPE_i960RD, "i960RD" },
+ { MYRS_CPUTYPE_i960RN, "i960RN" },
+ { MYRS_CPUTYPE_i960RP, "i960RP" },
+ { MYRS_CPUTYPE_NorthBay, "NorthBay" },
+ { MYRS_CPUTYPE_StrongArm, "StrongARM" },
+ { MYRS_CPUTYPE_i960RM, "i960RM" },
+};
+
+static ssize_t processor_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+ struct myrs_cpu_type_tbl *tbl;
+ const char *first_processor = NULL;
+ const char *second_processor = NULL;
+ struct myrs_ctlr_info *info = cs->ctlr_info;
+ ssize_t ret;
+ int i;
+
+ if (info->cpu[0].cpu_count) {
+ tbl = myrs_cpu_type_names;
+ for (i = 0; i < ARRAY_SIZE(myrs_cpu_type_names); i++) {
+ if (tbl[i].type == info->cpu[0].cpu_type) {
+ first_processor = tbl[i].name;
+ break;
+ }
+ }
+ }
+ if (info->cpu[1].cpu_count) {
+ tbl = myrs_cpu_type_names;
+ for (i = 0; i < ARRAY_SIZE(myrs_cpu_type_names); i++) {
+ if (tbl[i].type == info->cpu[1].cpu_type) {
+ second_processor = tbl[i].name;
+ break;
+ }
+ }
+ }
+ if (first_processor && second_processor)
+ ret = snprintf(buf, 64, "1: %s (%s, %d cpus)\n"
+ "2: %s (%s, %d cpus)\n",
+ info->cpu[0].cpu_name,
+ first_processor, info->cpu[0].cpu_count,
+ info->cpu[1].cpu_name,
+ second_processor, info->cpu[1].cpu_count);
+ else if (!second_processor)
+ ret = snprintf(buf, 64, "1: %s (%s, %d cpus)\n2: absent\n",
+ info->cpu[0].cpu_name,
+ first_processor, info->cpu[0].cpu_count);
+ else if (!first_processor)
+ ret = snprintf(buf, 64, "1: absent\n2: %s (%s, %d cpus)\n",
+ info->cpu[1].cpu_name,
+ second_processor, info->cpu[1].cpu_count);
+ else
+ ret = snprintf(buf, 64, "1: absent\n2: absent\n");
+
+ return ret;
+}
+static DEVICE_ATTR_RO(processor);
+
+static ssize_t model_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 28, "%s\n", cs->model_name);
+}
+static DEVICE_ATTR_RO(model);
+
+static ssize_t ctlr_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 4, "%d\n", cs->ctlr_info->ctlr_type);
+}
+static DEVICE_ATTR_RO(ctlr_type);
+
+static ssize_t cache_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 8, "%d MB\n", cs->ctlr_info->cache_size_mb);
+}
+static DEVICE_ATTR_RO(cache_size);
+
+static ssize_t firmware_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 16, "%d.%02d-%02d\n",
+ cs->ctlr_info->fw_major_version,
+ cs->ctlr_info->fw_minor_version,
+ cs->ctlr_info->fw_turn_number);
+}
+static DEVICE_ATTR_RO(firmware);
+
+static ssize_t discovery_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+ struct myrs_cmdblk *cmd_blk;
+ union myrs_cmd_mbox *mbox;
+ unsigned char status;
+
+ mutex_lock(&cs->dcmd_mutex);
+ cmd_blk = &cs->dcmd_blk;
+ myrs_reset_cmd(cmd_blk);
+ mbox = &cmd_blk->mbox;
+ mbox->common.opcode = MYRS_CMD_OP_IOCTL;
+ mbox->common.id = MYRS_DCMD_TAG;
+ mbox->common.control.dma_ctrl_to_host = true;
+ mbox->common.control.no_autosense = true;
+ mbox->common.ioctl_opcode = MYRS_IOCTL_START_DISCOVERY;
+ myrs_exec_cmd(cs, cmd_blk);
+ status = cmd_blk->status;
+ mutex_unlock(&cs->dcmd_mutex);
+ if (status != MYRS_STATUS_SUCCESS) {
+ shost_printk(KERN_INFO, shost,
+ "Discovery Not Initiated, status %02X\n",
+ status);
+ return -EINVAL;
+ }
+ shost_printk(KERN_INFO, shost, "Discovery Initiated\n");
+ cs->next_evseq = 0;
+ cs->needs_update = true;
+ queue_delayed_work(cs->work_q, &cs->monitor_work, 1);
+ flush_delayed_work(&cs->monitor_work);
+ shost_printk(KERN_INFO, shost, "Discovery Completed\n");
+
+ return count;
+}
+static DEVICE_ATTR_WO(discovery);
+
+static ssize_t flush_cache_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+ unsigned char status;
+
+ status = myrs_dev_op(cs, MYRS_IOCTL_FLUSH_DEVICE_DATA,
+ MYRS_RAID_CONTROLLER);
+ if (status == MYRS_STATUS_SUCCESS) {
+ shost_printk(KERN_INFO, shost, "Cache Flush Completed\n");
+ return count;
+ }
+ shost_printk(KERN_INFO, shost,
+ "Cache Flush failed, status 0x%02x\n", status);
+ return -EIO;
+}
+static DEVICE_ATTR_WO(flush_cache);
+
+static ssize_t disable_enclosure_messages_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct myrs_hba *cs = shost_priv(shost);
+
+ return snprintf(buf, 3, "%d\n", cs->disable_enc_msg);
+}
+
+static ssize_t disable_enclosure_messages_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ int value, ret;
+
+ ret = kstrtoint(buf, 0, &value);
+ if (ret)
+ return ret;
+
+ if (value > 2)
+ return -EINVAL;
+
+ cs->disable_enc_msg = value;
+ return count;
+}
+static DEVICE_ATTR_RW(disable_enclosure_messages);
+
+static struct device_attribute *myrs_shost_attrs[] = {
+ &dev_attr_serial,
+ &dev_attr_ctlr_num,
+ &dev_attr_processor,
+ &dev_attr_model,
+ &dev_attr_ctlr_type,
+ &dev_attr_cache_size,
+ &dev_attr_firmware,
+ &dev_attr_discovery,
+ &dev_attr_flush_cache,
+ &dev_attr_disable_enclosure_messages,
+ NULL,
+};
+
+/*
+ * SCSI midlayer interface
+ */
+int myrs_host_reset(struct scsi_cmnd *scmd)
+{
+ struct Scsi_Host *shost = scmd->device->host;
+ struct myrs_hba *cs = shost_priv(shost);
+
+ cs->reset(cs->io_base);
+ return SUCCESS;
+}
+
+static void myrs_mode_sense(struct myrs_hba *cs, struct scsi_cmnd *scmd,
+ struct myrs_ldev_info *ldev_info)
+{
+ unsigned char modes[32], *mode_pg;
+ bool dbd;
+ size_t mode_len;
+
+ dbd = (scmd->cmnd[1] & 0x08) == 0x08;
+ if (dbd) {
+ mode_len = 24;
+ mode_pg = &modes[4];
+ } else {
+ mode_len = 32;
+ mode_pg = &modes[12];
+ }
+ memset(modes, 0, sizeof(modes));
+ modes[0] = mode_len - 1;
+ modes[2] = 0x10; /* Enable FUA */
+ if (ldev_info->ldev_control.wce == MYRS_LOGICALDEVICE_RO)
+ modes[2] |= 0x80;
+ if (!dbd) {
+ unsigned char *block_desc = &modes[4];
+
+ modes[3] = 8;
+ put_unaligned_be32(ldev_info->cfg_devsize, &block_desc[0]);
+ put_unaligned_be32(ldev_info->devsize_bytes, &block_desc[5]);
+ }
+ mode_pg[0] = 0x08;
+ mode_pg[1] = 0x12;
+ if (ldev_info->ldev_control.rce == MYRS_READCACHE_DISABLED)
+ mode_pg[2] |= 0x01;
+ if (ldev_info->ldev_control.wce == MYRS_WRITECACHE_ENABLED ||
+ ldev_info->ldev_control.wce == MYRS_INTELLIGENT_WRITECACHE_ENABLED)
+ mode_pg[2] |= 0x04;
+ if (ldev_info->cacheline_size) {
+ mode_pg[2] |= 0x08;
+ put_unaligned_be16(1 << ldev_info->cacheline_size,
+ &mode_pg[14]);
+ }
+
+ scsi_sg_copy_from_buffer(scmd, modes, mode_len);
+}
+
+static int myrs_queuecommand(struct Scsi_Host *shost,
+ struct scsi_cmnd *scmd)
+{
+ struct myrs_hba *cs = shost_priv(shost);
+ struct myrs_cmdblk *cmd_blk = scsi_cmd_priv(scmd);
+ union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
+ struct scsi_device *sdev = scmd->device;
+ union myrs_sgl *hw_sge;
+ dma_addr_t sense_addr;
+ struct scatterlist *sgl;
+ unsigned long flags, timeout;
+ int nsge;
+
+ if (!scmd->device->hostdata) {
+ scmd->result = (DID_NO_CONNECT << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
+ switch (scmd->cmnd[0]) {
+ case REPORT_LUNS:
+ scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x20, 0x0);
+ scmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+ scmd->scsi_done(scmd);
+ return 0;
+ case MODE_SENSE:
+ if (scmd->device->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+
+ if ((scmd->cmnd[2] & 0x3F) != 0x3F &&
+ (scmd->cmnd[2] & 0x3F) != 0x08) {
+ /* Illegal request, invalid field in CDB */
+ scsi_build_sense_buffer(0, scmd->sense_buffer,
+ ILLEGAL_REQUEST, 0x24, 0);
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ } else {
+ myrs_mode_sense(cs, scmd, ldev_info);
+ scmd->result = (DID_OK << 16);
+ }
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ break;
+ }
+
+ myrs_reset_cmd(cmd_blk);
+ cmd_blk->sense = dma_pool_alloc(cs->sense_pool, GFP_ATOMIC,
+ &sense_addr);
+ if (!cmd_blk->sense)
+ return SCSI_MLQUEUE_HOST_BUSY;
+ cmd_blk->sense_addr = sense_addr;
+
+ timeout = scmd->request->timeout;
+ if (scmd->cmd_len <= 10) {
+ if (scmd->device->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+
+ mbox->SCSI_10.opcode = MYRS_CMD_OP_SCSI_10;
+ mbox->SCSI_10.pdev.lun = ldev_info->lun;
+ mbox->SCSI_10.pdev.target = ldev_info->target;
+ mbox->SCSI_10.pdev.channel = ldev_info->channel;
+ mbox->SCSI_10.pdev.ctlr = 0;
+ } else {
+ mbox->SCSI_10.opcode = MYRS_CMD_OP_SCSI_10_PASSTHRU;
+ mbox->SCSI_10.pdev.lun = sdev->lun;
+ mbox->SCSI_10.pdev.target = sdev->id;
+ mbox->SCSI_10.pdev.channel = sdev->channel;
+ }
+ mbox->SCSI_10.id = scmd->request->tag + 3;
+ mbox->SCSI_10.control.dma_ctrl_to_host =
+ (scmd->sc_data_direction == DMA_FROM_DEVICE);
+ if (scmd->request->cmd_flags & REQ_FUA)
+ mbox->SCSI_10.control.fua = true;
+ mbox->SCSI_10.dma_size = scsi_bufflen(scmd);
+ mbox->SCSI_10.sense_addr = cmd_blk->sense_addr;
+ mbox->SCSI_10.sense_len = MYRS_SENSE_SIZE;
+ mbox->SCSI_10.cdb_len = scmd->cmd_len;
+ if (timeout > 60) {
+ mbox->SCSI_10.tmo.tmo_scale = MYRS_TMO_SCALE_MINUTES;
+ mbox->SCSI_10.tmo.tmo_val = timeout / 60;
+ } else {
+ mbox->SCSI_10.tmo.tmo_scale = MYRS_TMO_SCALE_SECONDS;
+ mbox->SCSI_10.tmo.tmo_val = timeout;
+ }
+ memcpy(&mbox->SCSI_10.cdb, scmd->cmnd, scmd->cmd_len);
+ hw_sge = &mbox->SCSI_10.dma_addr;
+ cmd_blk->dcdb = NULL;
+ } else {
+ dma_addr_t dcdb_dma;
+
+ cmd_blk->dcdb = dma_pool_alloc(cs->dcdb_pool, GFP_ATOMIC,
+ &dcdb_dma);
+ if (!cmd_blk->dcdb) {
+ dma_pool_free(cs->sense_pool, cmd_blk->sense,
+ cmd_blk->sense_addr);
+ cmd_blk->sense = NULL;
+ cmd_blk->sense_addr = 0;
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ cmd_blk->dcdb_dma = dcdb_dma;
+ if (scmd->device->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+
+ mbox->SCSI_255.opcode = MYRS_CMD_OP_SCSI_256;
+ mbox->SCSI_255.pdev.lun = ldev_info->lun;
+ mbox->SCSI_255.pdev.target = ldev_info->target;
+ mbox->SCSI_255.pdev.channel = ldev_info->channel;
+ mbox->SCSI_255.pdev.ctlr = 0;
+ } else {
+ mbox->SCSI_255.opcode = MYRS_CMD_OP_SCSI_255_PASSTHRU;
+ mbox->SCSI_255.pdev.lun = sdev->lun;
+ mbox->SCSI_255.pdev.target = sdev->id;
+ mbox->SCSI_255.pdev.channel = sdev->channel;
+ }
+ mbox->SCSI_255.id = scmd->request->tag + 3;
+ mbox->SCSI_255.control.dma_ctrl_to_host =
+ (scmd->sc_data_direction == DMA_FROM_DEVICE);
+ if (scmd->request->cmd_flags & REQ_FUA)
+ mbox->SCSI_255.control.fua = true;
+ mbox->SCSI_255.dma_size = scsi_bufflen(scmd);
+ mbox->SCSI_255.sense_addr = cmd_blk->sense_addr;
+ mbox->SCSI_255.sense_len = MYRS_SENSE_SIZE;
+ mbox->SCSI_255.cdb_len = scmd->cmd_len;
+ mbox->SCSI_255.cdb_addr = cmd_blk->dcdb_dma;
+ if (timeout > 60) {
+ mbox->SCSI_255.tmo.tmo_scale = MYRS_TMO_SCALE_MINUTES;
+ mbox->SCSI_255.tmo.tmo_val = timeout / 60;
+ } else {
+ mbox->SCSI_255.tmo.tmo_scale = MYRS_TMO_SCALE_SECONDS;
+ mbox->SCSI_255.tmo.tmo_val = timeout;
+ }
+ memcpy(cmd_blk->dcdb, scmd->cmnd, scmd->cmd_len);
+ hw_sge = &mbox->SCSI_255.dma_addr;
+ }
+ if (scmd->sc_data_direction == DMA_NONE)
+ goto submit;
+ nsge = scsi_dma_map(scmd);
+ if (nsge == 1) {
+ sgl = scsi_sglist(scmd);
+ hw_sge->sge[0].sge_addr = (u64)sg_dma_address(sgl);
+ hw_sge->sge[0].sge_count = (u64)sg_dma_len(sgl);
+ } else {
+ struct myrs_sge *hw_sgl;
+ dma_addr_t hw_sgl_addr;
+ int i;
+
+ if (nsge > 2) {
+ hw_sgl = dma_pool_alloc(cs->sg_pool, GFP_ATOMIC,
+ &hw_sgl_addr);
+ if (WARN_ON(!hw_sgl)) {
+ if (cmd_blk->dcdb) {
+ dma_pool_free(cs->dcdb_pool,
+ cmd_blk->dcdb,
+ cmd_blk->dcdb_dma);
+ cmd_blk->dcdb = NULL;
+ cmd_blk->dcdb_dma = 0;
+ }
+ dma_pool_free(cs->sense_pool,
+ cmd_blk->sense,
+ cmd_blk->sense_addr);
+ cmd_blk->sense = NULL;
+ cmd_blk->sense_addr = 0;
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ cmd_blk->sgl = hw_sgl;
+ cmd_blk->sgl_addr = hw_sgl_addr;
+ if (scmd->cmd_len <= 10)
+ mbox->SCSI_10.control.add_sge_mem = true;
+ else
+ mbox->SCSI_255.control.add_sge_mem = true;
+ hw_sge->ext.sge0_len = nsge;
+ hw_sge->ext.sge0_addr = cmd_blk->sgl_addr;
+ } else
+ hw_sgl = hw_sge->sge;
+
+ scsi_for_each_sg(scmd, sgl, nsge, i) {
+ if (WARN_ON(!hw_sgl)) {
+ scsi_dma_unmap(scmd);
+ scmd->result = (DID_ERROR << 16);
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ hw_sgl->sge_addr = (u64)sg_dma_address(sgl);
+ hw_sgl->sge_count = (u64)sg_dma_len(sgl);
+ hw_sgl++;
+ }
+ }
+submit:
+ spin_lock_irqsave(&cs->queue_lock, flags);
+ myrs_qcmd(cs, cmd_blk);
+ spin_unlock_irqrestore(&cs->queue_lock, flags);
+
+ return 0;
+}
+
+static unsigned short myrs_translate_ldev(struct myrs_hba *cs,
+ struct scsi_device *sdev)
+{
+ unsigned short ldev_num;
+ unsigned int chan_offset =
+ sdev->channel - cs->ctlr_info->physchan_present;
+
+ ldev_num = sdev->id + chan_offset * sdev->host->max_id;
+
+ return ldev_num;
+}
+
+static int myrs_slave_alloc(struct scsi_device *sdev)
+{
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ unsigned char status;
+
+ if (sdev->channel > sdev->host->max_channel)
+ return 0;
+
+ if (sdev->channel >= cs->ctlr_info->physchan_present) {
+ struct myrs_ldev_info *ldev_info;
+ unsigned short ldev_num;
+
+ if (sdev->lun > 0)
+ return -ENXIO;
+
+ ldev_num = myrs_translate_ldev(cs, sdev);
+
+ ldev_info = kzalloc(sizeof(*ldev_info), GFP_KERNEL|GFP_DMA);
+ if (!ldev_info)
+ return -ENOMEM;
+
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev->hostdata = NULL;
+ kfree(ldev_info);
+ } else {
+ enum raid_level level;
+
+ dev_dbg(&sdev->sdev_gendev,
+ "Logical device mapping %d:%d:%d -> %d\n",
+ ldev_info->channel, ldev_info->target,
+ ldev_info->lun, ldev_info->ldev_num);
+
+ sdev->hostdata = ldev_info;
+ switch (ldev_info->raid_level) {
+ case MYRS_RAID_LEVEL0:
+ level = RAID_LEVEL_LINEAR;
+ break;
+ case MYRS_RAID_LEVEL1:
+ level = RAID_LEVEL_1;
+ break;
+ case MYRS_RAID_LEVEL3:
+ case MYRS_RAID_LEVEL3F:
+ case MYRS_RAID_LEVEL3L:
+ level = RAID_LEVEL_3;
+ break;
+ case MYRS_RAID_LEVEL5:
+ case MYRS_RAID_LEVEL5L:
+ level = RAID_LEVEL_5;
+ break;
+ case MYRS_RAID_LEVEL6:
+ level = RAID_LEVEL_6;
+ break;
+ case MYRS_RAID_LEVELE:
+ case MYRS_RAID_NEWSPAN:
+ case MYRS_RAID_SPAN:
+ level = RAID_LEVEL_LINEAR;
+ break;
+ case MYRS_RAID_JBOD:
+ level = RAID_LEVEL_JBOD;
+ break;
+ default:
+ level = RAID_LEVEL_UNKNOWN;
+ break;
+ }
+ raid_set_level(myrs_raid_template,
+ &sdev->sdev_gendev, level);
+ if (ldev_info->dev_state != MYRS_DEVICE_ONLINE) {
+ const char *name;
+
+ name = myrs_devstate_name(ldev_info->dev_state);
+ sdev_printk(KERN_DEBUG, sdev,
+ "logical device in state %s\n",
+ name ? name : "Invalid");
+ }
+ }
+ } else {
+ struct myrs_pdev_info *pdev_info;
+
+ pdev_info = kzalloc(sizeof(*pdev_info), GFP_KERNEL|GFP_DMA);
+ if (!pdev_info)
+ return -ENOMEM;
+
+ status = myrs_get_pdev_info(cs, sdev->channel,
+ sdev->id, sdev->lun,
+ pdev_info);
+ if (status != MYRS_STATUS_SUCCESS) {
+ sdev->hostdata = NULL;
+ kfree(pdev_info);
+ return -ENXIO;
+ }
+ sdev->hostdata = pdev_info;
+ }
+ return 0;
+}
+
+static int myrs_slave_configure(struct scsi_device *sdev)
+{
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info;
+
+ if (sdev->channel > sdev->host->max_channel)
+ return -ENXIO;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present) {
+ /* Skip HBA device */
+ if (sdev->type == TYPE_RAID)
+ return -ENXIO;
+ sdev->no_uld_attach = 1;
+ return 0;
+ }
+ if (sdev->lun != 0)
+ return -ENXIO;
+
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ return -ENXIO;
+ if (ldev_info->ldev_control.wce == MYRS_WRITECACHE_ENABLED ||
+ ldev_info->ldev_control.wce == MYRS_INTELLIGENT_WRITECACHE_ENABLED)
+ sdev->wce_default_on = 1;
+ sdev->tagged_supported = 1;
+ return 0;
+}
+
+static void myrs_slave_destroy(struct scsi_device *sdev)
+{
+ kfree(sdev->hostdata);
+}
+
+struct scsi_host_template myrs_template = {
+ .module = THIS_MODULE,
+ .name = "DAC960",
+ .proc_name = "myrs",
+ .queuecommand = myrs_queuecommand,
+ .eh_host_reset_handler = myrs_host_reset,
+ .slave_alloc = myrs_slave_alloc,
+ .slave_configure = myrs_slave_configure,
+ .slave_destroy = myrs_slave_destroy,
+ .cmd_size = sizeof(struct myrs_cmdblk),
+ .shost_attrs = myrs_shost_attrs,
+ .sdev_attrs = myrs_sdev_attrs,
+ .this_id = -1,
+};
+
+static struct myrs_hba *myrs_alloc_host(struct pci_dev *pdev,
+ const struct pci_device_id *entry)
+{
+ struct Scsi_Host *shost;
+ struct myrs_hba *cs;
+
+ shost = scsi_host_alloc(&myrs_template, sizeof(struct myrs_hba));
+ if (!shost)
+ return NULL;
+
+ shost->max_cmd_len = 16;
+ shost->max_lun = 256;
+ cs = shost_priv(shost);
+ mutex_init(&cs->dcmd_mutex);
+ mutex_init(&cs->cinfo_mutex);
+ cs->host = shost;
+
+ return cs;
+}
+
+/*
+ * RAID template functions
+ */
+
+/**
+ * myrs_is_raid - return boolean indicating device is raid volume
+ * @dev the device struct object
+ */
+static int
+myrs_is_raid(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+
+ return (sdev->channel >= cs->ctlr_info->physchan_present) ? 1 : 0;
+}
+
+/**
+ * myrs_get_resync - get raid volume resync percent complete
+ * @dev the device struct object
+ */
+static void
+myrs_get_resync(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+ u8 percent_complete = 0, status;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present || !ldev_info)
+ return;
+ if (ldev_info->rbld_active) {
+ unsigned short ldev_num = ldev_info->ldev_num;
+
+ status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ percent_complete = ldev_info->rbld_lba * 100 /
+ ldev_info->cfg_devsize;
+ }
+ raid_set_resync(myrs_raid_template, dev, percent_complete);
+}
+
+/**
+ * myrs_get_state - get raid volume status
+ * @dev the device struct object
+ */
+static void
+myrs_get_state(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct myrs_hba *cs = shost_priv(sdev->host);
+ struct myrs_ldev_info *ldev_info = sdev->hostdata;
+ enum raid_state state = RAID_STATE_UNKNOWN;
+
+ if (sdev->channel < cs->ctlr_info->physchan_present || !ldev_info)
+ state = RAID_STATE_UNKNOWN;
+ else {
+ switch (ldev_info->dev_state) {
+ case MYRS_DEVICE_ONLINE:
+ state = RAID_STATE_ACTIVE;
+ break;
+ case MYRS_DEVICE_SUSPECTED_CRITICAL:
+ case MYRS_DEVICE_CRITICAL:
+ state = RAID_STATE_DEGRADED;
+ break;
+ case MYRS_DEVICE_REBUILD:
+ state = RAID_STATE_RESYNCING;
+ break;
+ case MYRS_DEVICE_UNCONFIGURED:
+ case MYRS_DEVICE_INVALID_STATE:
+ state = RAID_STATE_UNKNOWN;
+ break;
+ default:
+ state = RAID_STATE_OFFLINE;
+ }
+ }
+ raid_set_state(myrs_raid_template, dev, state);
+}
+
+struct raid_function_template myrs_raid_functions = {
+ .cookie = &myrs_template,
+ .is_raid = myrs_is_raid,
+ .get_resync = myrs_get_resync,
+ .get_state = myrs_get_state,
+};
+
+/*
+ * PCI interface functions
+ */
+void myrs_flush_cache(struct myrs_hba *cs)
+{
+ myrs_dev_op(cs, MYRS_IOCTL_FLUSH_DEVICE_DATA, MYRS_RAID_CONTROLLER);
+}
+
+static void myrs_handle_scsi(struct myrs_hba *cs, struct myrs_cmdblk *cmd_blk,
+ struct scsi_cmnd *scmd)
+{
+ unsigned char status;
+
+ if (!cmd_blk)
+ return;
+
+ scsi_dma_unmap(scmd);
+ status = cmd_blk->status;
+ if (cmd_blk->sense) {
+ if (status == MYRS_STATUS_FAILED && cmd_blk->sense_len) {
+ unsigned int sense_len = SCSI_SENSE_BUFFERSIZE;
+
+ if (sense_len > cmd_blk->sense_len)
+ sense_len = cmd_blk->sense_len;
+ memcpy(scmd->sense_buffer, cmd_blk->sense, sense_len);
+ }
+ dma_pool_free(cs->sense_pool, cmd_blk->sense,
+ cmd_blk->sense_addr);
+ cmd_blk->sense = NULL;
+ cmd_blk->sense_addr = 0;
+ }
+ if (cmd_blk->dcdb) {
+ dma_pool_free(cs->dcdb_pool, cmd_blk->dcdb,
+ cmd_blk->dcdb_dma);
+ cmd_blk->dcdb = NULL;
+ cmd_blk->dcdb_dma = 0;
+ }
+ if (cmd_blk->sgl) {
+ dma_pool_free(cs->sg_pool, cmd_blk->sgl,
+ cmd_blk->sgl_addr);
+ cmd_blk->sgl = NULL;
+ cmd_blk->sgl_addr = 0;
+ }
+ if (cmd_blk->residual)
+ scsi_set_resid(scmd, cmd_blk->residual);
+ if (status == MYRS_STATUS_DEVICE_NON_RESPONSIVE ||
+ status == MYRS_STATUS_DEVICE_NON_RESPONSIVE2)
+ scmd->result = (DID_BAD_TARGET << 16);
+ else
+ scmd->result = (DID_OK << 16) || status;
+ scmd->scsi_done(scmd);
+}
+
+static void myrs_handle_cmdblk(struct myrs_hba *cs, struct myrs_cmdblk *cmd_blk)
+{
+ if (!cmd_blk)
+ return;
+
+ if (cmd_blk->complete) {
+ complete(cmd_blk->complete);
+ cmd_blk->complete = NULL;
+ }
+}
+
+static void myrs_monitor(struct work_struct *work)
+{
+ struct myrs_hba *cs = container_of(work, struct myrs_hba,
+ monitor_work.work);
+ struct Scsi_Host *shost = cs->host;
+ struct myrs_ctlr_info *info = cs->ctlr_info;
+ unsigned int epoch = cs->fwstat_buf->epoch;
+ unsigned long interval = MYRS_PRIMARY_MONITOR_INTERVAL;
+ unsigned char status;
+
+ dev_dbg(&shost->shost_gendev, "monitor tick\n");
+
+ status = myrs_get_fwstatus(cs);
+
+ if (cs->needs_update) {
+ cs->needs_update = false;
+ mutex_lock(&cs->cinfo_mutex);
+ status = myrs_get_ctlr_info(cs);
+ mutex_unlock(&cs->cinfo_mutex);
+ }
+ if (cs->fwstat_buf->next_evseq - cs->next_evseq > 0) {
+ status = myrs_get_event(cs, cs->next_evseq,
+ cs->event_buf);
+ if (status == MYRS_STATUS_SUCCESS) {
+ myrs_log_event(cs, cs->event_buf);
+ cs->next_evseq++;
+ interval = 1;
+ }
+ }
+
+ if (time_after(jiffies, cs->secondary_monitor_time
+ + MYRS_SECONDARY_MONITOR_INTERVAL))
+ cs->secondary_monitor_time = jiffies;
+
+ if (info->bg_init_active +
+ info->ldev_init_active +
+ info->pdev_init_active +
+ info->cc_active +
+ info->rbld_active +
+ info->exp_active != 0) {
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, shost) {
+ struct myrs_ldev_info *ldev_info;
+ int ldev_num;
+
+ if (sdev->channel < info->physchan_present)
+ continue;
+ ldev_info = sdev->hostdata;
+ if (!ldev_info)
+ continue;
+ ldev_num = ldev_info->ldev_num;
+ myrs_get_ldev_info(cs, ldev_num, ldev_info);
+ }
+ cs->needs_update = true;
+ }
+ if (epoch == cs->epoch &&
+ cs->fwstat_buf->next_evseq == cs->next_evseq &&
+ (cs->needs_update == false ||
+ time_before(jiffies, cs->primary_monitor_time
+ + MYRS_PRIMARY_MONITOR_INTERVAL))) {
+ interval = MYRS_SECONDARY_MONITOR_INTERVAL;
+ }
+
+ if (interval > 1)
+ cs->primary_monitor_time = jiffies;
+ queue_delayed_work(cs->work_q, &cs->monitor_work, interval);
+}
+
+static bool myrs_create_mempools(struct pci_dev *pdev, struct myrs_hba *cs)
+{
+ struct Scsi_Host *shost = cs->host;
+ size_t elem_size, elem_align;
+
+ elem_align = sizeof(struct myrs_sge);
+ elem_size = shost->sg_tablesize * elem_align;
+ cs->sg_pool = dma_pool_create("myrs_sg", &pdev->dev,
+ elem_size, elem_align, 0);
+ if (cs->sg_pool == NULL) {
+ shost_printk(KERN_ERR, shost,
+ "Failed to allocate SG pool\n");
+ return false;
+ }
+
+ cs->sense_pool = dma_pool_create("myrs_sense", &pdev->dev,
+ MYRS_SENSE_SIZE, sizeof(int), 0);
+ if (cs->sense_pool == NULL) {
+ dma_pool_destroy(cs->sg_pool);
+ cs->sg_pool = NULL;
+ shost_printk(KERN_ERR, shost,
+ "Failed to allocate sense data pool\n");
+ return false;
+ }
+
+ cs->dcdb_pool = dma_pool_create("myrs_dcdb", &pdev->dev,
+ MYRS_DCDB_SIZE,
+ sizeof(unsigned char), 0);
+ if (!cs->dcdb_pool) {
+ dma_pool_destroy(cs->sg_pool);
+ cs->sg_pool = NULL;
+ dma_pool_destroy(cs->sense_pool);
+ cs->sense_pool = NULL;
+ shost_printk(KERN_ERR, shost,
+ "Failed to allocate DCDB pool\n");
+ return false;
+ }
+
+ snprintf(cs->work_q_name, sizeof(cs->work_q_name),
+ "myrs_wq_%d", shost->host_no);
+ cs->work_q = create_singlethread_workqueue(cs->work_q_name);
+ if (!cs->work_q) {
+ dma_pool_destroy(cs->dcdb_pool);
+ cs->dcdb_pool = NULL;
+ dma_pool_destroy(cs->sg_pool);
+ cs->sg_pool = NULL;
+ dma_pool_destroy(cs->sense_pool);
+ cs->sense_pool = NULL;
+ shost_printk(KERN_ERR, shost,
+ "Failed to create workqueue\n");
+ return false;
+ }
+
+ /* Initialize the Monitoring Timer. */
+ INIT_DELAYED_WORK(&cs->monitor_work, myrs_monitor);
+ queue_delayed_work(cs->work_q, &cs->monitor_work, 1);
+
+ return true;
+}
+
+static void myrs_destroy_mempools(struct myrs_hba *cs)
+{
+ cancel_delayed_work_sync(&cs->monitor_work);
+ destroy_workqueue(cs->work_q);
+
+ dma_pool_destroy(cs->sg_pool);
+ dma_pool_destroy(cs->dcdb_pool);
+ dma_pool_destroy(cs->sense_pool);
+}
+
+static void myrs_unmap(struct myrs_hba *cs)
+{
+ kfree(cs->event_buf);
+ kfree(cs->ctlr_info);
+ if (cs->fwstat_buf) {
+ dma_free_coherent(&cs->pdev->dev, sizeof(struct myrs_fwstat),
+ cs->fwstat_buf, cs->fwstat_addr);
+ cs->fwstat_buf = NULL;
+ }
+ if (cs->first_stat_mbox) {
+ dma_free_coherent(&cs->pdev->dev, cs->stat_mbox_size,
+ cs->first_stat_mbox, cs->stat_mbox_addr);
+ cs->first_stat_mbox = NULL;
+ }
+ if (cs->first_cmd_mbox) {
+ dma_free_coherent(&cs->pdev->dev, cs->cmd_mbox_size,
+ cs->first_cmd_mbox, cs->cmd_mbox_addr);
+ cs->first_cmd_mbox = NULL;
+ }
+}
+
+static void myrs_cleanup(struct myrs_hba *cs)
+{
+ struct pci_dev *pdev = cs->pdev;
+
+ /* Free the memory mailbox, status, and related structures */
+ myrs_unmap(cs);
+
+ if (cs->mmio_base) {
+ cs->disable_intr(cs);
+ iounmap(cs->mmio_base);
+ }
+ if (cs->irq)
+ free_irq(cs->irq, cs);
+ if (cs->io_addr)
+ release_region(cs->io_addr, 0x80);
+ iounmap(cs->mmio_base);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ scsi_host_put(cs->host);
+}
+
+static struct myrs_hba *myrs_detect(struct pci_dev *pdev,
+ const struct pci_device_id *entry)
+{
+ struct myrs_privdata *privdata =
+ (struct myrs_privdata *)entry->driver_data;
+ irq_handler_t irq_handler = privdata->irq_handler;
+ unsigned int mmio_size = privdata->mmio_size;
+ struct myrs_hba *cs = NULL;
+
+ cs = myrs_alloc_host(pdev, entry);
+ if (!cs) {
+ dev_err(&pdev->dev, "Unable to allocate Controller\n");
+ return NULL;
+ }
+ cs->pdev = pdev;
+
+ if (pci_enable_device(pdev))
+ goto Failure;
+
+ cs->pci_addr = pci_resource_start(pdev, 0);
+
+ pci_set_drvdata(pdev, cs);
+ spin_lock_init(&cs->queue_lock);
+ /* Map the Controller Register Window. */
+ if (mmio_size < PAGE_SIZE)
+ mmio_size = PAGE_SIZE;
+ cs->mmio_base = ioremap_nocache(cs->pci_addr & PAGE_MASK, mmio_size);
+ if (cs->mmio_base == NULL) {
+ dev_err(&pdev->dev,
+ "Unable to map Controller Register Window\n");
+ goto Failure;
+ }
+
+ cs->io_base = cs->mmio_base + (cs->pci_addr & ~PAGE_MASK);
+ if (privdata->hw_init(pdev, cs, cs->io_base))
+ goto Failure;
+
+ /* Acquire shared access to the IRQ Channel. */
+ if (request_irq(pdev->irq, irq_handler, IRQF_SHARED, "myrs", cs) < 0) {
+ dev_err(&pdev->dev,
+ "Unable to acquire IRQ Channel %d\n", pdev->irq);
+ goto Failure;
+ }
+ cs->irq = pdev->irq;
+ return cs;
+
+Failure:
+ dev_err(&pdev->dev,
+ "Failed to initialize Controller\n");
+ myrs_cleanup(cs);
+ return NULL;
+}
+
+/**
+ * myrs_err_status reports Controller BIOS Messages passed through
+ the Error Status Register when the driver performs the BIOS handshaking.
+ It returns true for fatal errors and false otherwise.
+*/
+
+static bool myrs_err_status(struct myrs_hba *cs, unsigned char status,
+ unsigned char parm0, unsigned char parm1)
+{
+ struct pci_dev *pdev = cs->pdev;
+
+ switch (status) {
+ case 0x00:
+ dev_info(&pdev->dev,
+ "Physical Device %d:%d Not Responding\n",
+ parm1, parm0);
+ break;
+ case 0x08:
+ dev_notice(&pdev->dev, "Spinning Up Drives\n");
+ break;
+ case 0x30:
+ dev_notice(&pdev->dev, "Configuration Checksum Error\n");
+ break;
+ case 0x60:
+ dev_notice(&pdev->dev, "Mirror Race Recovery Failed\n");
+ break;
+ case 0x70:
+ dev_notice(&pdev->dev, "Mirror Race Recovery In Progress\n");
+ break;
+ case 0x90:
+ dev_notice(&pdev->dev, "Physical Device %d:%d COD Mismatch\n",
+ parm1, parm0);
+ break;
+ case 0xA0:
+ dev_notice(&pdev->dev, "Logical Drive Installation Aborted\n");
+ break;
+ case 0xB0:
+ dev_notice(&pdev->dev, "Mirror Race On A Critical Logical Drive\n");
+ break;
+ case 0xD0:
+ dev_notice(&pdev->dev, "New Controller Configuration Found\n");
+ break;
+ case 0xF0:
+ dev_err(&pdev->dev, "Fatal Memory Parity Error\n");
+ return true;
+ default:
+ dev_err(&pdev->dev, "Unknown Initialization Error %02X\n",
+ status);
+ return true;
+ }
+ return false;
+}
+
+/*
+ * Hardware-specific functions
+ */
+
+/*
+ * DAC960 GEM Series Controllers.
+ */
+
+static inline void DAC960_GEM_hw_mbox_new_cmd(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_IDB_HWMBOX_NEW_CMD << 24);
+
+ writel(val, base + DAC960_GEM_IDB_READ_OFFSET);
+}
+
+static inline void DAC960_GEM_ack_hw_mbox_status(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_IDB_HWMBOX_ACK_STS << 24);
+
+ writel(val, base + DAC960_GEM_IDB_CLEAR_OFFSET);
+}
+
+static inline void DAC960_GEM_gen_intr(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_IDB_GEN_IRQ << 24);
+
+ writel(val, base + DAC960_GEM_IDB_READ_OFFSET);
+}
+
+static inline void DAC960_GEM_reset_ctrl(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_IDB_CTRL_RESET << 24);
+
+ writel(val, base + DAC960_GEM_IDB_READ_OFFSET);
+}
+
+static inline void DAC960_GEM_mem_mbox_new_cmd(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_IDB_HWMBOX_NEW_CMD << 24);
+
+ writel(val, base + DAC960_GEM_IDB_READ_OFFSET);
+}
+
+static inline bool DAC960_GEM_hw_mbox_is_full(void __iomem *base)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_IDB_READ_OFFSET);
+ return (le32_to_cpu(val) >> 24) & DAC960_GEM_IDB_HWMBOX_FULL;
+}
+
+static inline bool DAC960_GEM_init_in_progress(void __iomem *base)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_IDB_READ_OFFSET);
+ return (le32_to_cpu(val) >> 24) & DAC960_GEM_IDB_INIT_IN_PROGRESS;
+}
+
+static inline void DAC960_GEM_ack_hw_mbox_intr(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_ODB_HWMBOX_ACK_IRQ << 24);
+
+ writel(val, base + DAC960_GEM_ODB_CLEAR_OFFSET);
+}
+
+static inline void DAC960_GEM_ack_mem_mbox_intr(void __iomem *base)
+{
+ __le32 val = cpu_to_le32(DAC960_GEM_ODB_MMBOX_ACK_IRQ << 24);
+
+ writel(val, base + DAC960_GEM_ODB_CLEAR_OFFSET);
+}
+
+static inline void DAC960_GEM_ack_intr(void __iomem *base)
+{
+ __le32 val = cpu_to_le32((DAC960_GEM_ODB_HWMBOX_ACK_IRQ |
+ DAC960_GEM_ODB_MMBOX_ACK_IRQ) << 24);
+
+ writel(val, base + DAC960_GEM_ODB_CLEAR_OFFSET);
+}
+
+static inline bool DAC960_GEM_hw_mbox_status_available(void __iomem *base)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_ODB_READ_OFFSET);
+ return (le32_to_cpu(val) >> 24) & DAC960_GEM_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline bool DAC960_GEM_mem_mbox_status_available(void __iomem *base)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_ODB_READ_OFFSET);
+ return (le32_to_cpu(val) >> 24) & DAC960_GEM_ODB_MMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_GEM_enable_intr(void __iomem *base)
+{
+ __le32 val = cpu_to_le32((DAC960_GEM_IRQMASK_HWMBOX_IRQ |
+ DAC960_GEM_IRQMASK_MMBOX_IRQ) << 24);
+ writel(val, base + DAC960_GEM_IRQMASK_CLEAR_OFFSET);
+}
+
+static inline void DAC960_GEM_disable_intr(void __iomem *base)
+{
+ __le32 val = 0;
+
+ writel(val, base + DAC960_GEM_IRQMASK_READ_OFFSET);
+}
+
+static inline bool DAC960_GEM_intr_enabled(void __iomem *base)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_IRQMASK_READ_OFFSET);
+ return !((le32_to_cpu(val) >> 24) &
+ (DAC960_GEM_IRQMASK_HWMBOX_IRQ |
+ DAC960_GEM_IRQMASK_MMBOX_IRQ));
+}
+
+static inline void DAC960_GEM_write_cmd_mbox(union myrs_cmd_mbox *mem_mbox,
+ union myrs_cmd_mbox *mbox)
+{
+ memcpy(&mem_mbox->words[1], &mbox->words[1],
+ sizeof(union myrs_cmd_mbox) - sizeof(unsigned int));
+ /* Barrier to avoid reordering */
+ wmb();
+ mem_mbox->words[0] = mbox->words[0];
+ /* Barrier to force PCI access */
+ mb();
+}
+
+static inline void DAC960_GEM_write_hw_mbox(void __iomem *base,
+ dma_addr_t cmd_mbox_addr)
+{
+ dma_addr_writeql(cmd_mbox_addr, base + DAC960_GEM_CMDMBX_OFFSET);
+}
+
+static inline unsigned short DAC960_GEM_read_cmd_ident(void __iomem *base)
+{
+ return readw(base + DAC960_GEM_CMDSTS_OFFSET);
+}
+
+static inline unsigned char DAC960_GEM_read_cmd_status(void __iomem *base)
+{
+ return readw(base + DAC960_GEM_CMDSTS_OFFSET + 2);
+}
+
+static inline bool
+DAC960_GEM_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ __le32 val;
+
+ val = readl(base + DAC960_GEM_ERRSTS_READ_OFFSET);
+ if (!((le32_to_cpu(val) >> 24) & DAC960_GEM_ERRSTS_PENDING))
+ return false;
+ *error = val & ~(DAC960_GEM_ERRSTS_PENDING << 24);
+ *param0 = readb(base + DAC960_GEM_CMDMBX_OFFSET + 0);
+ *param1 = readb(base + DAC960_GEM_CMDMBX_OFFSET + 1);
+ writel(0x03000000, base + DAC960_GEM_ERRSTS_CLEAR_OFFSET);
+ return true;
+}
+
+static inline unsigned char
+DAC960_GEM_mbox_init(void __iomem *base, dma_addr_t mbox_addr)
+{
+ unsigned char status;
+
+ while (DAC960_GEM_hw_mbox_is_full(base))
+ udelay(1);
+ DAC960_GEM_write_hw_mbox(base, mbox_addr);
+ DAC960_GEM_hw_mbox_new_cmd(base);
+ while (!DAC960_GEM_hw_mbox_status_available(base))
+ udelay(1);
+ status = DAC960_GEM_read_cmd_status(base);
+ DAC960_GEM_ack_hw_mbox_intr(base);
+ DAC960_GEM_ack_hw_mbox_status(base);
+
+ return status;
+}
+
+static int DAC960_GEM_hw_init(struct pci_dev *pdev,
+ struct myrs_hba *cs, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char status, parm0, parm1;
+
+ DAC960_GEM_disable_intr(base);
+ DAC960_GEM_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_GEM_init_in_progress(base) &&
+ timeout < MYRS_MAILBOX_TIMEOUT) {
+ if (DAC960_GEM_read_error_status(base, &status,
+ &parm0, &parm1) &&
+ myrs_err_status(cs, status, parm0, parm1))
+ return -EIO;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRS_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrs_enable_mmio_mbox(cs, DAC960_GEM_mbox_init)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_GEM_reset_ctrl(base);
+ return -EAGAIN;
+ }
+ DAC960_GEM_enable_intr(base);
+ cs->write_cmd_mbox = DAC960_GEM_write_cmd_mbox;
+ cs->get_cmd_mbox = DAC960_GEM_mem_mbox_new_cmd;
+ cs->disable_intr = DAC960_GEM_disable_intr;
+ cs->reset = DAC960_GEM_reset_ctrl;
+ return 0;
+}
+
+static irqreturn_t DAC960_GEM_intr_handler(int irq, void *arg)
+{
+ struct myrs_hba *cs = arg;
+ void __iomem *base = cs->io_base;
+ struct myrs_stat_mbox *next_stat_mbox;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cs->queue_lock, flags);
+ DAC960_GEM_ack_intr(base);
+ next_stat_mbox = cs->next_stat_mbox;
+ while (next_stat_mbox->id > 0) {
+ unsigned short id = next_stat_mbox->id;
+ struct scsi_cmnd *scmd = NULL;
+ struct myrs_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRS_DCMD_TAG)
+ cmd_blk = &cs->dcmd_blk;
+ else if (id == MYRS_MCMD_TAG)
+ cmd_blk = &cs->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cs->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk) {
+ cmd_blk->status = next_stat_mbox->status;
+ cmd_blk->sense_len = next_stat_mbox->sense_len;
+ cmd_blk->residual = next_stat_mbox->residual;
+ } else
+ dev_err(&cs->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ memset(next_stat_mbox, 0, sizeof(struct myrs_stat_mbox));
+ if (++next_stat_mbox > cs->last_stat_mbox)
+ next_stat_mbox = cs->first_stat_mbox;
+
+ if (cmd_blk) {
+ if (id < 3)
+ myrs_handle_cmdblk(cs, cmd_blk);
+ else
+ myrs_handle_scsi(cs, cmd_blk, scmd);
+ }
+ }
+ cs->next_stat_mbox = next_stat_mbox;
+ spin_unlock_irqrestore(&cs->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrs_privdata DAC960_GEM_privdata = {
+ .hw_init = DAC960_GEM_hw_init,
+ .irq_handler = DAC960_GEM_intr_handler,
+ .mmio_size = DAC960_GEM_mmio_size,
+};
+
+/*
+ * DAC960 BA Series Controllers.
+ */
+
+static inline void DAC960_BA_hw_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_BA_IDB_HWMBOX_NEW_CMD, base + DAC960_BA_IDB_OFFSET);
+}
+
+static inline void DAC960_BA_ack_hw_mbox_status(void __iomem *base)
+{
+ writeb(DAC960_BA_IDB_HWMBOX_ACK_STS, base + DAC960_BA_IDB_OFFSET);
+}
+
+static inline void DAC960_BA_gen_intr(void __iomem *base)
+{
+ writeb(DAC960_BA_IDB_GEN_IRQ, base + DAC960_BA_IDB_OFFSET);
+}
+
+static inline void DAC960_BA_reset_ctrl(void __iomem *base)
+{
+ writeb(DAC960_BA_IDB_CTRL_RESET, base + DAC960_BA_IDB_OFFSET);
+}
+
+static inline void DAC960_BA_mem_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_BA_IDB_MMBOX_NEW_CMD, base + DAC960_BA_IDB_OFFSET);
+}
+
+static inline bool DAC960_BA_hw_mbox_is_full(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_IDB_OFFSET);
+ return !(val & DAC960_BA_IDB_HWMBOX_EMPTY);
+}
+
+static inline bool DAC960_BA_init_in_progress(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_IDB_OFFSET);
+ return !(val & DAC960_BA_IDB_INIT_DONE);
+}
+
+static inline void DAC960_BA_ack_hw_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_BA_ODB_HWMBOX_ACK_IRQ, base + DAC960_BA_ODB_OFFSET);
+}
+
+static inline void DAC960_BA_ack_mem_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_BA_ODB_MMBOX_ACK_IRQ, base + DAC960_BA_ODB_OFFSET);
+}
+
+static inline void DAC960_BA_ack_intr(void __iomem *base)
+{
+ writeb(DAC960_BA_ODB_HWMBOX_ACK_IRQ | DAC960_BA_ODB_MMBOX_ACK_IRQ,
+ base + DAC960_BA_ODB_OFFSET);
+}
+
+static inline bool DAC960_BA_hw_mbox_status_available(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_ODB_OFFSET);
+ return val & DAC960_BA_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline bool DAC960_BA_mem_mbox_status_available(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_ODB_OFFSET);
+ return val & DAC960_BA_ODB_MMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_BA_enable_intr(void __iomem *base)
+{
+ writeb(~DAC960_BA_IRQMASK_DISABLE_IRQ, base + DAC960_BA_IRQMASK_OFFSET);
+}
+
+static inline void DAC960_BA_disable_intr(void __iomem *base)
+{
+ writeb(0xFF, base + DAC960_BA_IRQMASK_OFFSET);
+}
+
+static inline bool DAC960_BA_intr_enabled(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_IRQMASK_OFFSET);
+ return !(val & DAC960_BA_IRQMASK_DISABLE_IRQ);
+}
+
+static inline void DAC960_BA_write_cmd_mbox(union myrs_cmd_mbox *mem_mbox,
+ union myrs_cmd_mbox *mbox)
+{
+ memcpy(&mem_mbox->words[1], &mbox->words[1],
+ sizeof(union myrs_cmd_mbox) - sizeof(unsigned int));
+ /* Barrier to avoid reordering */
+ wmb();
+ mem_mbox->words[0] = mbox->words[0];
+ /* Barrier to force PCI access */
+ mb();
+}
+
+
+static inline void DAC960_BA_write_hw_mbox(void __iomem *base,
+ dma_addr_t cmd_mbox_addr)
+{
+ dma_addr_writeql(cmd_mbox_addr, base + DAC960_BA_CMDMBX_OFFSET);
+}
+
+static inline unsigned short DAC960_BA_read_cmd_ident(void __iomem *base)
+{
+ return readw(base + DAC960_BA_CMDSTS_OFFSET);
+}
+
+static inline unsigned char DAC960_BA_read_cmd_status(void __iomem *base)
+{
+ return readw(base + DAC960_BA_CMDSTS_OFFSET + 2);
+}
+
+static inline bool
+DAC960_BA_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ u8 val;
+
+ val = readb(base + DAC960_BA_ERRSTS_OFFSET);
+ if (!(val & DAC960_BA_ERRSTS_PENDING))
+ return false;
+ val &= ~DAC960_BA_ERRSTS_PENDING;
+ *error = val;
+ *param0 = readb(base + DAC960_BA_CMDMBX_OFFSET + 0);
+ *param1 = readb(base + DAC960_BA_CMDMBX_OFFSET + 1);
+ writeb(0xFF, base + DAC960_BA_ERRSTS_OFFSET);
+ return true;
+}
+
+static inline unsigned char
+DAC960_BA_mbox_init(void __iomem *base, dma_addr_t mbox_addr)
+{
+ unsigned char status;
+
+ while (DAC960_BA_hw_mbox_is_full(base))
+ udelay(1);
+ DAC960_BA_write_hw_mbox(base, mbox_addr);
+ DAC960_BA_hw_mbox_new_cmd(base);
+ while (!DAC960_BA_hw_mbox_status_available(base))
+ udelay(1);
+ status = DAC960_BA_read_cmd_status(base);
+ DAC960_BA_ack_hw_mbox_intr(base);
+ DAC960_BA_ack_hw_mbox_status(base);
+
+ return status;
+}
+
+static int DAC960_BA_hw_init(struct pci_dev *pdev,
+ struct myrs_hba *cs, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char status, parm0, parm1;
+
+ DAC960_BA_disable_intr(base);
+ DAC960_BA_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_BA_init_in_progress(base) &&
+ timeout < MYRS_MAILBOX_TIMEOUT) {
+ if (DAC960_BA_read_error_status(base, &status,
+ &parm0, &parm1) &&
+ myrs_err_status(cs, status, parm0, parm1))
+ return -EIO;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRS_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrs_enable_mmio_mbox(cs, DAC960_BA_mbox_init)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_BA_reset_ctrl(base);
+ return -EAGAIN;
+ }
+ DAC960_BA_enable_intr(base);
+ cs->write_cmd_mbox = DAC960_BA_write_cmd_mbox;
+ cs->get_cmd_mbox = DAC960_BA_mem_mbox_new_cmd;
+ cs->disable_intr = DAC960_BA_disable_intr;
+ cs->reset = DAC960_BA_reset_ctrl;
+ return 0;
+}
+
+static irqreturn_t DAC960_BA_intr_handler(int irq, void *arg)
+{
+ struct myrs_hba *cs = arg;
+ void __iomem *base = cs->io_base;
+ struct myrs_stat_mbox *next_stat_mbox;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cs->queue_lock, flags);
+ DAC960_BA_ack_intr(base);
+ next_stat_mbox = cs->next_stat_mbox;
+ while (next_stat_mbox->id > 0) {
+ unsigned short id = next_stat_mbox->id;
+ struct scsi_cmnd *scmd = NULL;
+ struct myrs_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRS_DCMD_TAG)
+ cmd_blk = &cs->dcmd_blk;
+ else if (id == MYRS_MCMD_TAG)
+ cmd_blk = &cs->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cs->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk) {
+ cmd_blk->status = next_stat_mbox->status;
+ cmd_blk->sense_len = next_stat_mbox->sense_len;
+ cmd_blk->residual = next_stat_mbox->residual;
+ } else
+ dev_err(&cs->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ memset(next_stat_mbox, 0, sizeof(struct myrs_stat_mbox));
+ if (++next_stat_mbox > cs->last_stat_mbox)
+ next_stat_mbox = cs->first_stat_mbox;
+
+ if (cmd_blk) {
+ if (id < 3)
+ myrs_handle_cmdblk(cs, cmd_blk);
+ else
+ myrs_handle_scsi(cs, cmd_blk, scmd);
+ }
+ }
+ cs->next_stat_mbox = next_stat_mbox;
+ spin_unlock_irqrestore(&cs->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrs_privdata DAC960_BA_privdata = {
+ .hw_init = DAC960_BA_hw_init,
+ .irq_handler = DAC960_BA_intr_handler,
+ .mmio_size = DAC960_BA_mmio_size,
+};
+
+/*
+ * DAC960 LP Series Controllers.
+ */
+
+static inline void DAC960_LP_hw_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_LP_IDB_HWMBOX_NEW_CMD, base + DAC960_LP_IDB_OFFSET);
+}
+
+static inline void DAC960_LP_ack_hw_mbox_status(void __iomem *base)
+{
+ writeb(DAC960_LP_IDB_HWMBOX_ACK_STS, base + DAC960_LP_IDB_OFFSET);
+}
+
+static inline void DAC960_LP_gen_intr(void __iomem *base)
+{
+ writeb(DAC960_LP_IDB_GEN_IRQ, base + DAC960_LP_IDB_OFFSET);
+}
+
+static inline void DAC960_LP_reset_ctrl(void __iomem *base)
+{
+ writeb(DAC960_LP_IDB_CTRL_RESET, base + DAC960_LP_IDB_OFFSET);
+}
+
+static inline void DAC960_LP_mem_mbox_new_cmd(void __iomem *base)
+{
+ writeb(DAC960_LP_IDB_MMBOX_NEW_CMD, base + DAC960_LP_IDB_OFFSET);
+}
+
+static inline bool DAC960_LP_hw_mbox_is_full(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_IDB_OFFSET);
+ return val & DAC960_LP_IDB_HWMBOX_FULL;
+}
+
+static inline bool DAC960_LP_init_in_progress(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_IDB_OFFSET);
+ return val & DAC960_LP_IDB_INIT_IN_PROGRESS;
+}
+
+static inline void DAC960_LP_ack_hw_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_LP_ODB_HWMBOX_ACK_IRQ, base + DAC960_LP_ODB_OFFSET);
+}
+
+static inline void DAC960_LP_ack_mem_mbox_intr(void __iomem *base)
+{
+ writeb(DAC960_LP_ODB_MMBOX_ACK_IRQ, base + DAC960_LP_ODB_OFFSET);
+}
+
+static inline void DAC960_LP_ack_intr(void __iomem *base)
+{
+ writeb(DAC960_LP_ODB_HWMBOX_ACK_IRQ | DAC960_LP_ODB_MMBOX_ACK_IRQ,
+ base + DAC960_LP_ODB_OFFSET);
+}
+
+static inline bool DAC960_LP_hw_mbox_status_available(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_ODB_OFFSET);
+ return val & DAC960_LP_ODB_HWMBOX_STS_AVAIL;
+}
+
+static inline bool DAC960_LP_mem_mbox_status_available(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_ODB_OFFSET);
+ return val & DAC960_LP_ODB_MMBOX_STS_AVAIL;
+}
+
+static inline void DAC960_LP_enable_intr(void __iomem *base)
+{
+ writeb(~DAC960_LP_IRQMASK_DISABLE_IRQ, base + DAC960_LP_IRQMASK_OFFSET);
+}
+
+static inline void DAC960_LP_disable_intr(void __iomem *base)
+{
+ writeb(0xFF, base + DAC960_LP_IRQMASK_OFFSET);
+}
+
+static inline bool DAC960_LP_intr_enabled(void __iomem *base)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_IRQMASK_OFFSET);
+ return !(val & DAC960_LP_IRQMASK_DISABLE_IRQ);
+}
+
+static inline void DAC960_LP_write_cmd_mbox(union myrs_cmd_mbox *mem_mbox,
+ union myrs_cmd_mbox *mbox)
+{
+ memcpy(&mem_mbox->words[1], &mbox->words[1],
+ sizeof(union myrs_cmd_mbox) - sizeof(unsigned int));
+ /* Barrier to avoid reordering */
+ wmb();
+ mem_mbox->words[0] = mbox->words[0];
+ /* Barrier to force PCI access */
+ mb();
+}
+
+static inline void DAC960_LP_write_hw_mbox(void __iomem *base,
+ dma_addr_t cmd_mbox_addr)
+{
+ dma_addr_writeql(cmd_mbox_addr, base + DAC960_LP_CMDMBX_OFFSET);
+}
+
+static inline unsigned short DAC960_LP_read_cmd_ident(void __iomem *base)
+{
+ return readw(base + DAC960_LP_CMDSTS_OFFSET);
+}
+
+static inline unsigned char DAC960_LP_read_cmd_status(void __iomem *base)
+{
+ return readw(base + DAC960_LP_CMDSTS_OFFSET + 2);
+}
+
+static inline bool
+DAC960_LP_read_error_status(void __iomem *base, unsigned char *error,
+ unsigned char *param0, unsigned char *param1)
+{
+ u8 val;
+
+ val = readb(base + DAC960_LP_ERRSTS_OFFSET);
+ if (!(val & DAC960_LP_ERRSTS_PENDING))
+ return false;
+ val &= ~DAC960_LP_ERRSTS_PENDING;
+ *error = val;
+ *param0 = readb(base + DAC960_LP_CMDMBX_OFFSET + 0);
+ *param1 = readb(base + DAC960_LP_CMDMBX_OFFSET + 1);
+ writeb(0xFF, base + DAC960_LP_ERRSTS_OFFSET);
+ return true;
+}
+
+static inline unsigned char
+DAC960_LP_mbox_init(void __iomem *base, dma_addr_t mbox_addr)
+{
+ unsigned char status;
+
+ while (DAC960_LP_hw_mbox_is_full(base))
+ udelay(1);
+ DAC960_LP_write_hw_mbox(base, mbox_addr);
+ DAC960_LP_hw_mbox_new_cmd(base);
+ while (!DAC960_LP_hw_mbox_status_available(base))
+ udelay(1);
+ status = DAC960_LP_read_cmd_status(base);
+ DAC960_LP_ack_hw_mbox_intr(base);
+ DAC960_LP_ack_hw_mbox_status(base);
+
+ return status;
+}
+
+static int DAC960_LP_hw_init(struct pci_dev *pdev,
+ struct myrs_hba *cs, void __iomem *base)
+{
+ int timeout = 0;
+ unsigned char status, parm0, parm1;
+
+ DAC960_LP_disable_intr(base);
+ DAC960_LP_ack_hw_mbox_status(base);
+ udelay(1000);
+ while (DAC960_LP_init_in_progress(base) &&
+ timeout < MYRS_MAILBOX_TIMEOUT) {
+ if (DAC960_LP_read_error_status(base, &status,
+ &parm0, &parm1) &&
+ myrs_err_status(cs, status, parm0, parm1))
+ return -EIO;
+ udelay(10);
+ timeout++;
+ }
+ if (timeout == MYRS_MAILBOX_TIMEOUT) {
+ dev_err(&pdev->dev,
+ "Timeout waiting for Controller Initialisation\n");
+ return -ETIMEDOUT;
+ }
+ if (!myrs_enable_mmio_mbox(cs, DAC960_LP_mbox_init)) {
+ dev_err(&pdev->dev,
+ "Unable to Enable Memory Mailbox Interface\n");
+ DAC960_LP_reset_ctrl(base);
+ return -ENODEV;
+ }
+ DAC960_LP_enable_intr(base);
+ cs->write_cmd_mbox = DAC960_LP_write_cmd_mbox;
+ cs->get_cmd_mbox = DAC960_LP_mem_mbox_new_cmd;
+ cs->disable_intr = DAC960_LP_disable_intr;
+ cs->reset = DAC960_LP_reset_ctrl;
+
+ return 0;
+}
+
+static irqreturn_t DAC960_LP_intr_handler(int irq, void *arg)
+{
+ struct myrs_hba *cs = arg;
+ void __iomem *base = cs->io_base;
+ struct myrs_stat_mbox *next_stat_mbox;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cs->queue_lock, flags);
+ DAC960_LP_ack_intr(base);
+ next_stat_mbox = cs->next_stat_mbox;
+ while (next_stat_mbox->id > 0) {
+ unsigned short id = next_stat_mbox->id;
+ struct scsi_cmnd *scmd = NULL;
+ struct myrs_cmdblk *cmd_blk = NULL;
+
+ if (id == MYRS_DCMD_TAG)
+ cmd_blk = &cs->dcmd_blk;
+ else if (id == MYRS_MCMD_TAG)
+ cmd_blk = &cs->mcmd_blk;
+ else {
+ scmd = scsi_host_find_tag(cs->host, id - 3);
+ if (scmd)
+ cmd_blk = scsi_cmd_priv(scmd);
+ }
+ if (cmd_blk) {
+ cmd_blk->status = next_stat_mbox->status;
+ cmd_blk->sense_len = next_stat_mbox->sense_len;
+ cmd_blk->residual = next_stat_mbox->residual;
+ } else
+ dev_err(&cs->pdev->dev,
+ "Unhandled command completion %d\n", id);
+
+ memset(next_stat_mbox, 0, sizeof(struct myrs_stat_mbox));
+ if (++next_stat_mbox > cs->last_stat_mbox)
+ next_stat_mbox = cs->first_stat_mbox;
+
+ if (cmd_blk) {
+ if (id < 3)
+ myrs_handle_cmdblk(cs, cmd_blk);
+ else
+ myrs_handle_scsi(cs, cmd_blk, scmd);
+ }
+ }
+ cs->next_stat_mbox = next_stat_mbox;
+ spin_unlock_irqrestore(&cs->queue_lock, flags);
+ return IRQ_HANDLED;
+}
+
+struct myrs_privdata DAC960_LP_privdata = {
+ .hw_init = DAC960_LP_hw_init,
+ .irq_handler = DAC960_LP_intr_handler,
+ .mmio_size = DAC960_LP_mmio_size,
+};
+
+/*
+ * Module functions
+ */
+static int
+myrs_probe(struct pci_dev *dev, const struct pci_device_id *entry)
+{
+ struct myrs_hba *cs;
+ int ret;
+
+ cs = myrs_detect(dev, entry);
+ if (!cs)
+ return -ENODEV;
+
+ ret = myrs_get_config(cs);
+ if (ret < 0) {
+ myrs_cleanup(cs);
+ return ret;
+ }
+
+ if (!myrs_create_mempools(dev, cs)) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ ret = scsi_add_host(cs->host, &dev->dev);
+ if (ret) {
+ dev_err(&dev->dev, "scsi_add_host failed with %d\n", ret);
+ myrs_destroy_mempools(cs);
+ goto failed;
+ }
+ scsi_scan_host(cs->host);
+ return 0;
+failed:
+ myrs_cleanup(cs);
+ return ret;
+}
+
+
+static void myrs_remove(struct pci_dev *pdev)
+{
+ struct myrs_hba *cs = pci_get_drvdata(pdev);
+
+ if (cs == NULL)
+ return;
+
+ shost_printk(KERN_NOTICE, cs->host, "Flushing Cache...");
+ myrs_flush_cache(cs);
+ myrs_destroy_mempools(cs);
+ myrs_cleanup(cs);
+}
+
+
+static const struct pci_device_id myrs_id_table[] = {
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_MYLEX,
+ PCI_DEVICE_ID_MYLEX_DAC960_GEM,
+ PCI_SUBVENDOR_ID_MYLEX, PCI_ANY_ID),
+ .driver_data = (unsigned long) &DAC960_GEM_privdata,
+ },
+ {
+ PCI_DEVICE_DATA(MYLEX, DAC960_BA, &DAC960_BA_privdata),
+ },
+ {
+ PCI_DEVICE_DATA(MYLEX, DAC960_LP, &DAC960_LP_privdata),
+ },
+ {0, },
+};
+
+MODULE_DEVICE_TABLE(pci, myrs_id_table);
+
+static struct pci_driver myrs_pci_driver = {
+ .name = "myrs",
+ .id_table = myrs_id_table,
+ .probe = myrs_probe,
+ .remove = myrs_remove,
+};
+
+static int __init myrs_init_module(void)
+{
+ int ret;
+
+ myrs_raid_template = raid_class_attach(&myrs_raid_functions);
+ if (!myrs_raid_template)
+ return -ENODEV;
+
+ ret = pci_register_driver(&myrs_pci_driver);
+ if (ret)
+ raid_class_release(myrs_raid_template);
+
+ return ret;
+}
+
+static void __exit myrs_cleanup_module(void)
+{
+ pci_unregister_driver(&myrs_pci_driver);
+ raid_class_release(myrs_raid_template);
+}
+
+module_init(myrs_init_module);
+module_exit(myrs_cleanup_module);
+
+MODULE_DESCRIPTION("Mylex DAC960/AcceleRAID/eXtremeRAID driver (SCSI Interface)");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/myrs.h b/drivers/scsi/myrs.h
new file mode 100644
index 000000000000..e6702ee85e9f
--- /dev/null
+++ b/drivers/scsi/myrs.h
@@ -0,0 +1,1134 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
+ *
+ * This driver supports the newer, SCSI-based firmware interface only.
+ *
+ * Copyright 2018 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
+ *
+ * Based on the original DAC960 driver, which has
+ * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
+ * Portions Copyright 2002 by Mylex (An IBM Business Unit)
+ */
+
+#ifndef _MYRS_H
+#define _MYRS_H
+
+#define MYRS_MAILBOX_TIMEOUT 1000000
+
+#define MYRS_DCMD_TAG 1
+#define MYRS_MCMD_TAG 2
+
+#define MYRS_LINE_BUFFER_SIZE 128
+
+#define MYRS_PRIMARY_MONITOR_INTERVAL (10 * HZ)
+#define MYRS_SECONDARY_MONITOR_INTERVAL (60 * HZ)
+
+/* Maximum number of Scatter/Gather Segments supported */
+#define MYRS_SG_LIMIT 128
+
+/*
+ * Number of Command and Status Mailboxes used by the
+ * DAC960 V2 Firmware Memory Mailbox Interface.
+ */
+#define MYRS_MAX_CMD_MBOX 512
+#define MYRS_MAX_STAT_MBOX 512
+
+#define MYRS_DCDB_SIZE 16
+#define MYRS_SENSE_SIZE 14
+
+/*
+ * DAC960 V2 Firmware Command Opcodes.
+ */
+enum myrs_cmd_opcode {
+ MYRS_CMD_OP_MEMCOPY = 0x01,
+ MYRS_CMD_OP_SCSI_10_PASSTHRU = 0x02,
+ MYRS_CMD_OP_SCSI_255_PASSTHRU = 0x03,
+ MYRS_CMD_OP_SCSI_10 = 0x04,
+ MYRS_CMD_OP_SCSI_256 = 0x05,
+ MYRS_CMD_OP_IOCTL = 0x20,
+} __packed;
+
+/*
+ * DAC960 V2 Firmware IOCTL Opcodes.
+ */
+enum myrs_ioctl_opcode {
+ MYRS_IOCTL_GET_CTLR_INFO = 0x01,
+ MYRS_IOCTL_GET_LDEV_INFO_VALID = 0x03,
+ MYRS_IOCTL_GET_PDEV_INFO_VALID = 0x05,
+ MYRS_IOCTL_GET_HEALTH_STATUS = 0x11,
+ MYRS_IOCTL_GET_EVENT = 0x15,
+ MYRS_IOCTL_START_DISCOVERY = 0x81,
+ MYRS_IOCTL_SET_DEVICE_STATE = 0x82,
+ MYRS_IOCTL_INIT_PDEV_START = 0x84,
+ MYRS_IOCTL_INIT_PDEV_STOP = 0x85,
+ MYRS_IOCTL_INIT_LDEV_START = 0x86,
+ MYRS_IOCTL_INIT_LDEV_STOP = 0x87,
+ MYRS_IOCTL_RBLD_DEVICE_START = 0x88,
+ MYRS_IOCTL_RBLD_DEVICE_STOP = 0x89,
+ MYRS_IOCTL_MAKE_CONSISTENT_START = 0x8A,
+ MYRS_IOCTL_MAKE_CONSISTENT_STOP = 0x8B,
+ MYRS_IOCTL_CC_START = 0x8C,
+ MYRS_IOCTL_CC_STOP = 0x8D,
+ MYRS_IOCTL_SET_MEM_MBOX = 0x8E,
+ MYRS_IOCTL_RESET_DEVICE = 0x90,
+ MYRS_IOCTL_FLUSH_DEVICE_DATA = 0x91,
+ MYRS_IOCTL_PAUSE_DEVICE = 0x92,
+ MYRS_IOCTL_UNPAUS_EDEVICE = 0x93,
+ MYRS_IOCTL_LOCATE_DEVICE = 0x94,
+ MYRS_IOCTL_CREATE_CONFIGURATION = 0xC0,
+ MYRS_IOCTL_DELETE_LDEV = 0xC1,
+ MYRS_IOCTL_REPLACE_INTERNALDEVICE = 0xC2,
+ MYRS_IOCTL_RENAME_LDEV = 0xC3,
+ MYRS_IOCTL_ADD_CONFIGURATION = 0xC4,
+ MYRS_IOCTL_XLATE_PDEV_TO_LDEV = 0xC5,
+ MYRS_IOCTL_CLEAR_CONFIGURATION = 0xCA,
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Command Status Codes.
+ */
+#define MYRS_STATUS_SUCCESS 0x00
+#define MYRS_STATUS_FAILED 0x02
+#define MYRS_STATUS_DEVICE_BUSY 0x08
+#define MYRS_STATUS_DEVICE_NON_RESPONSIVE 0x0E
+#define MYRS_STATUS_DEVICE_NON_RESPONSIVE2 0x0F
+#define MYRS_STATUS_RESERVATION_CONFLICT 0x18
+
+/*
+ * DAC960 V2 Firmware Memory Type structure.
+ */
+struct myrs_mem_type {
+ enum {
+ MYRS_MEMTYPE_RESERVED = 0x00,
+ MYRS_MEMTYPE_DRAM = 0x01,
+ MYRS_MEMTYPE_EDRAM = 0x02,
+ MYRS_MEMTYPE_EDO = 0x03,
+ MYRS_MEMTYPE_SDRAM = 0x04,
+ MYRS_MEMTYPE_LAST = 0x1F,
+ } __packed mem_type:5; /* Byte 0 Bits 0-4 */
+ unsigned rsvd:1; /* Byte 0 Bit 5 */
+ unsigned mem_parity:1; /* Byte 0 Bit 6 */
+ unsigned mem_ecc:1; /* Byte 0 Bit 7 */
+};
+
+/*
+ * DAC960 V2 Firmware Processor Type structure.
+ */
+enum myrs_cpu_type {
+ MYRS_CPUTYPE_i960CA = 0x01,
+ MYRS_CPUTYPE_i960RD = 0x02,
+ MYRS_CPUTYPE_i960RN = 0x03,
+ MYRS_CPUTYPE_i960RP = 0x04,
+ MYRS_CPUTYPE_NorthBay = 0x05,
+ MYRS_CPUTYPE_StrongArm = 0x06,
+ MYRS_CPUTYPE_i960RM = 0x07,
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Get Controller Info reply structure.
+ */
+struct myrs_ctlr_info {
+ unsigned char rsvd1; /* Byte 0 */
+ enum {
+ MYRS_SCSI_BUS = 0x00,
+ MYRS_Fibre_BUS = 0x01,
+ MYRS_PCI_BUS = 0x03
+ } __packed bus; /* Byte 1 */
+ enum {
+ MYRS_CTLR_DAC960E = 0x01,
+ MYRS_CTLR_DAC960M = 0x08,
+ MYRS_CTLR_DAC960PD = 0x10,
+ MYRS_CTLR_DAC960PL = 0x11,
+ MYRS_CTLR_DAC960PU = 0x12,
+ MYRS_CTLR_DAC960PE = 0x13,
+ MYRS_CTLR_DAC960PG = 0x14,
+ MYRS_CTLR_DAC960PJ = 0x15,
+ MYRS_CTLR_DAC960PTL0 = 0x16,
+ MYRS_CTLR_DAC960PR = 0x17,
+ MYRS_CTLR_DAC960PRL = 0x18,
+ MYRS_CTLR_DAC960PT = 0x19,
+ MYRS_CTLR_DAC1164P = 0x1A,
+ MYRS_CTLR_DAC960PTL1 = 0x1B,
+ MYRS_CTLR_EXR2000P = 0x1C,
+ MYRS_CTLR_EXR3000P = 0x1D,
+ MYRS_CTLR_ACCELERAID352 = 0x1E,
+ MYRS_CTLR_ACCELERAID170 = 0x1F,
+ MYRS_CTLR_ACCELERAID160 = 0x20,
+ MYRS_CTLR_DAC960S = 0x60,
+ MYRS_CTLR_DAC960SU = 0x61,
+ MYRS_CTLR_DAC960SX = 0x62,
+ MYRS_CTLR_DAC960SF = 0x63,
+ MYRS_CTLR_DAC960SS = 0x64,
+ MYRS_CTLR_DAC960FL = 0x65,
+ MYRS_CTLR_DAC960LL = 0x66,
+ MYRS_CTLR_DAC960FF = 0x67,
+ MYRS_CTLR_DAC960HP = 0x68,
+ MYRS_CTLR_RAIDBRICK = 0x69,
+ MYRS_CTLR_METEOR_FL = 0x6A,
+ MYRS_CTLR_METEOR_FF = 0x6B
+ } __packed ctlr_type; /* Byte 2 */
+ unsigned char rsvd2; /* Byte 3 */
+ unsigned short bus_speed_mhz; /* Bytes 4-5 */
+ unsigned char bus_width; /* Byte 6 */
+ unsigned char flash_code; /* Byte 7 */
+ unsigned char ports_present; /* Byte 8 */
+ unsigned char rsvd3[7]; /* Bytes 9-15 */
+ unsigned char bus_name[16]; /* Bytes 16-31 */
+ unsigned char ctlr_name[16]; /* Bytes 32-47 */
+ unsigned char rsvd4[16]; /* Bytes 48-63 */
+ /* Firmware Release Information */
+ unsigned char fw_major_version; /* Byte 64 */
+ unsigned char fw_minor_version; /* Byte 65 */
+ unsigned char fw_turn_number; /* Byte 66 */
+ unsigned char fw_build_number; /* Byte 67 */
+ unsigned char fw_release_day; /* Byte 68 */
+ unsigned char fw_release_month; /* Byte 69 */
+ unsigned char fw_release_year_hi; /* Byte 70 */
+ unsigned char fw_release_year_lo; /* Byte 71 */
+ /* Hardware Release Information */
+ unsigned char hw_rev; /* Byte 72 */
+ unsigned char rsvd5[3]; /* Bytes 73-75 */
+ unsigned char hw_release_day; /* Byte 76 */
+ unsigned char hw_release_month; /* Byte 77 */
+ unsigned char hw_release_year_hi; /* Byte 78 */
+ unsigned char hw_release_year_lo; /* Byte 79 */
+ /* Hardware Manufacturing Information */
+ unsigned char manuf_batch_num; /* Byte 80 */
+ unsigned char rsvd6; /* Byte 81 */
+ unsigned char manuf_plant_num; /* Byte 82 */
+ unsigned char rsvd7; /* Byte 83 */
+ unsigned char hw_manuf_day; /* Byte 84 */
+ unsigned char hw_manuf_month; /* Byte 85 */
+ unsigned char hw_manuf_year_hi; /* Byte 86 */
+ unsigned char hw_manuf_year_lo; /* Byte 87 */
+ unsigned char max_pd_per_xld; /* Byte 88 */
+ unsigned char max_ild_per_xld; /* Byte 89 */
+ unsigned short nvram_size_kb; /* Bytes 90-91 */
+ unsigned char max_xld; /* Byte 92 */
+ unsigned char rsvd8[3]; /* Bytes 93-95 */
+ /* Unique Information per Controller */
+ unsigned char serial_number[16]; /* Bytes 96-111 */
+ unsigned char rsvd9[16]; /* Bytes 112-127 */
+ /* Vendor Information */
+ unsigned char rsvd10[3]; /* Bytes 128-130 */
+ unsigned char oem_code; /* Byte 131 */
+ unsigned char vendor[16]; /* Bytes 132-147 */
+ /* Other Physical/Controller/Operation Information */
+ unsigned char bbu_present:1; /* Byte 148 Bit 0 */
+ unsigned char cluster_mode:1; /* Byte 148 Bit 1 */
+ unsigned char rsvd11:6; /* Byte 148 Bits 2-7 */
+ unsigned char rsvd12[3]; /* Bytes 149-151 */
+ /* Physical Device Scan Information */
+ unsigned char pscan_active:1; /* Byte 152 Bit 0 */
+ unsigned char rsvd13:7; /* Byte 152 Bits 1-7 */
+ unsigned char pscan_chan; /* Byte 153 */
+ unsigned char pscan_target; /* Byte 154 */
+ unsigned char pscan_lun; /* Byte 155 */
+ /* Maximum Command Data Transfer Sizes */
+ unsigned short max_transfer_size; /* Bytes 156-157 */
+ unsigned short max_sge; /* Bytes 158-159 */
+ /* Logical/Physical Device Counts */
+ unsigned short ldev_present; /* Bytes 160-161 */
+ unsigned short ldev_critical; /* Bytes 162-163 */
+ unsigned short ldev_offline; /* Bytes 164-165 */
+ unsigned short pdev_present; /* Bytes 166-167 */
+ unsigned short pdisk_present; /* Bytes 168-169 */
+ unsigned short pdisk_critical; /* Bytes 170-171 */
+ unsigned short pdisk_offline; /* Bytes 172-173 */
+ unsigned short max_tcq; /* Bytes 174-175 */
+ /* Channel and Target ID Information */
+ unsigned char physchan_present; /* Byte 176 */
+ unsigned char virtchan_present; /* Byte 177 */
+ unsigned char physchan_max; /* Byte 178 */
+ unsigned char virtchan_max; /* Byte 179 */
+ unsigned char max_targets[16]; /* Bytes 180-195 */
+ unsigned char rsvd14[12]; /* Bytes 196-207 */
+ /* Memory/Cache Information */
+ unsigned short mem_size_mb; /* Bytes 208-209 */
+ unsigned short cache_size_mb; /* Bytes 210-211 */
+ unsigned int valid_cache_bytes; /* Bytes 212-215 */
+ unsigned int dirty_cache_bytes; /* Bytes 216-219 */
+ unsigned short mem_speed_mhz; /* Bytes 220-221 */
+ unsigned char mem_data_width; /* Byte 222 */
+ struct myrs_mem_type mem_type; /* Byte 223 */
+ unsigned char cache_mem_type_name[16]; /* Bytes 224-239 */
+ /* Execution Memory Information */
+ unsigned short exec_mem_size_mb; /* Bytes 240-241 */
+ unsigned short exec_l2_cache_size_mb; /* Bytes 242-243 */
+ unsigned char rsvd15[8]; /* Bytes 244-251 */
+ unsigned short exec_mem_speed_mhz; /* Bytes 252-253 */
+ unsigned char exec_mem_data_width; /* Byte 254 */
+ struct myrs_mem_type exec_mem_type; /* Byte 255 */
+ unsigned char exec_mem_type_name[16]; /* Bytes 256-271 */
+ /* CPU Type Information */
+ struct { /* Bytes 272-335 */
+ unsigned short cpu_speed_mhz;
+ enum myrs_cpu_type cpu_type;
+ unsigned char cpu_count;
+ unsigned char rsvd16[12];
+ unsigned char cpu_name[16];
+ } __packed cpu[2];
+ /* Debugging/Profiling/Command Time Tracing Information */
+ unsigned short cur_prof_page_num; /* Bytes 336-337 */
+ unsigned short num_prof_waiters; /* Bytes 338-339 */
+ unsigned short cur_trace_page_num; /* Bytes 340-341 */
+ unsigned short num_trace_waiters; /* Bytes 342-343 */
+ unsigned char rsvd18[8]; /* Bytes 344-351 */
+ /* Error Counters on Physical Devices */
+ unsigned short pdev_bus_resets; /* Bytes 352-353 */
+ unsigned short pdev_parity_errors; /* Bytes 355-355 */
+ unsigned short pdev_soft_errors; /* Bytes 356-357 */
+ unsigned short pdev_cmds_failed; /* Bytes 358-359 */
+ unsigned short pdev_misc_errors; /* Bytes 360-361 */
+ unsigned short pdev_cmd_timeouts; /* Bytes 362-363 */
+ unsigned short pdev_sel_timeouts; /* Bytes 364-365 */
+ unsigned short pdev_retries_done; /* Bytes 366-367 */
+ unsigned short pdev_aborts_done; /* Bytes 368-369 */
+ unsigned short pdev_host_aborts_done; /* Bytes 370-371 */
+ unsigned short pdev_predicted_failures; /* Bytes 372-373 */
+ unsigned short pdev_host_cmds_failed; /* Bytes 374-375 */
+ unsigned short pdev_hard_errors; /* Bytes 376-377 */
+ unsigned char rsvd19[6]; /* Bytes 378-383 */
+ /* Error Counters on Logical Devices */
+ unsigned short ldev_soft_errors; /* Bytes 384-385 */
+ unsigned short ldev_cmds_failed; /* Bytes 386-387 */
+ unsigned short ldev_host_aborts_done; /* Bytes 388-389 */
+ unsigned char rsvd20[2]; /* Bytes 390-391 */
+ /* Error Counters on Controller */
+ unsigned short ctlr_mem_errors; /* Bytes 392-393 */
+ unsigned short ctlr_host_aborts_done; /* Bytes 394-395 */
+ unsigned char rsvd21[4]; /* Bytes 396-399 */
+ /* Long Duration Activity Information */
+ unsigned short bg_init_active; /* Bytes 400-401 */
+ unsigned short ldev_init_active; /* Bytes 402-403 */
+ unsigned short pdev_init_active; /* Bytes 404-405 */
+ unsigned short cc_active; /* Bytes 406-407 */
+ unsigned short rbld_active; /* Bytes 408-409 */
+ unsigned short exp_active; /* Bytes 410-411 */
+ unsigned short patrol_active; /* Bytes 412-413 */
+ unsigned char rsvd22[2]; /* Bytes 414-415 */
+ /* Flash ROM Information */
+ unsigned char flash_type; /* Byte 416 */
+ unsigned char rsvd23; /* Byte 417 */
+ unsigned short flash_size_MB; /* Bytes 418-419 */
+ unsigned int flash_limit; /* Bytes 420-423 */
+ unsigned int flash_count; /* Bytes 424-427 */
+ unsigned char rsvd24[4]; /* Bytes 428-431 */
+ unsigned char flash_type_name[16]; /* Bytes 432-447 */
+ /* Firmware Run Time Information */
+ unsigned char rbld_rate; /* Byte 448 */
+ unsigned char bg_init_rate; /* Byte 449 */
+ unsigned char fg_init_rate; /* Byte 450 */
+ unsigned char cc_rate; /* Byte 451 */
+ unsigned char rsvd25[4]; /* Bytes 452-455 */
+ unsigned int max_dp; /* Bytes 456-459 */
+ unsigned int free_dp; /* Bytes 460-463 */
+ unsigned int max_iop; /* Bytes 464-467 */
+ unsigned int free_iop; /* Bytes 468-471 */
+ unsigned short max_combined_len; /* Bytes 472-473 */
+ unsigned short num_cfg_groups; /* Bytes 474-475 */
+ unsigned installation_abort_status:1; /* Byte 476 Bit 0 */
+ unsigned maint_mode_status:1; /* Byte 476 Bit 1 */
+ unsigned rsvd26:6; /* Byte 476 Bits 2-7 */
+ unsigned char rsvd27[6]; /* Bytes 477-511 */
+ unsigned char rsvd28[512]; /* Bytes 512-1023 */
+};
+
+/*
+ * DAC960 V2 Firmware Device State type.
+ */
+enum myrs_devstate {
+ MYRS_DEVICE_UNCONFIGURED = 0x00,
+ MYRS_DEVICE_ONLINE = 0x01,
+ MYRS_DEVICE_REBUILD = 0x03,
+ MYRS_DEVICE_MISSING = 0x04,
+ MYRS_DEVICE_SUSPECTED_CRITICAL = 0x05,
+ MYRS_DEVICE_OFFLINE = 0x08,
+ MYRS_DEVICE_CRITICAL = 0x09,
+ MYRS_DEVICE_SUSPECTED_DEAD = 0x0C,
+ MYRS_DEVICE_COMMANDED_OFFLINE = 0x10,
+ MYRS_DEVICE_STANDBY = 0x21,
+ MYRS_DEVICE_INVALID_STATE = 0xFF,
+} __packed;
+
+/*
+ * DAC960 V2 RAID Levels
+ */
+enum myrs_raid_level {
+ MYRS_RAID_LEVEL0 = 0x0, /* RAID 0 */
+ MYRS_RAID_LEVEL1 = 0x1, /* RAID 1 */
+ MYRS_RAID_LEVEL3 = 0x3, /* RAID 3 right asymmetric parity */
+ MYRS_RAID_LEVEL5 = 0x5, /* RAID 5 right asymmetric parity */
+ MYRS_RAID_LEVEL6 = 0x6, /* RAID 6 (Mylex RAID 6) */
+ MYRS_RAID_JBOD = 0x7, /* RAID 7 (JBOD) */
+ MYRS_RAID_NEWSPAN = 0x8, /* New Mylex SPAN */
+ MYRS_RAID_LEVEL3F = 0x9, /* RAID 3 fixed parity */
+ MYRS_RAID_LEVEL3L = 0xb, /* RAID 3 left symmetric parity */
+ MYRS_RAID_SPAN = 0xc, /* current spanning implementation */
+ MYRS_RAID_LEVEL5L = 0xd, /* RAID 5 left symmetric parity */
+ MYRS_RAID_LEVELE = 0xe, /* RAID E (concatenation) */
+ MYRS_RAID_PHYSICAL = 0xf, /* physical device */
+} __packed;
+
+enum myrs_stripe_size {
+ MYRS_STRIPE_SIZE_0 = 0x0, /* no stripe (RAID 1, RAID 7, etc) */
+ MYRS_STRIPE_SIZE_512B = 0x1,
+ MYRS_STRIPE_SIZE_1K = 0x2,
+ MYRS_STRIPE_SIZE_2K = 0x3,
+ MYRS_STRIPE_SIZE_4K = 0x4,
+ MYRS_STRIPE_SIZE_8K = 0x5,
+ MYRS_STRIPE_SIZE_16K = 0x6,
+ MYRS_STRIPE_SIZE_32K = 0x7,
+ MYRS_STRIPE_SIZE_64K = 0x8,
+ MYRS_STRIPE_SIZE_128K = 0x9,
+ MYRS_STRIPE_SIZE_256K = 0xa,
+ MYRS_STRIPE_SIZE_512K = 0xb,
+ MYRS_STRIPE_SIZE_1M = 0xc,
+} __packed;
+
+enum myrs_cacheline_size {
+ MYRS_CACHELINE_ZERO = 0x0, /* caching cannot be enabled */
+ MYRS_CACHELINE_512B = 0x1,
+ MYRS_CACHELINE_1K = 0x2,
+ MYRS_CACHELINE_2K = 0x3,
+ MYRS_CACHELINE_4K = 0x4,
+ MYRS_CACHELINE_8K = 0x5,
+ MYRS_CACHELINE_16K = 0x6,
+ MYRS_CACHELINE_32K = 0x7,
+ MYRS_CACHELINE_64K = 0x8,
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Get Logical Device Info reply structure.
+ */
+struct myrs_ldev_info {
+ unsigned char ctlr; /* Byte 0 */
+ unsigned char channel; /* Byte 1 */
+ unsigned char target; /* Byte 2 */
+ unsigned char lun; /* Byte 3 */
+ enum myrs_devstate dev_state; /* Byte 4 */
+ unsigned char raid_level; /* Byte 5 */
+ enum myrs_stripe_size stripe_size; /* Byte 6 */
+ enum myrs_cacheline_size cacheline_size; /* Byte 7 */
+ struct {
+ enum {
+ MYRS_READCACHE_DISABLED = 0x0,
+ MYRS_READCACHE_ENABLED = 0x1,
+ MYRS_READAHEAD_ENABLED = 0x2,
+ MYRS_INTELLIGENT_READAHEAD_ENABLED = 0x3,
+ MYRS_READCACHE_LAST = 0x7,
+ } __packed rce:3; /* Byte 8 Bits 0-2 */
+ enum {
+ MYRS_WRITECACHE_DISABLED = 0x0,
+ MYRS_LOGICALDEVICE_RO = 0x1,
+ MYRS_WRITECACHE_ENABLED = 0x2,
+ MYRS_INTELLIGENT_WRITECACHE_ENABLED = 0x3,
+ MYRS_WRITECACHE_LAST = 0x7,
+ } __packed wce:3; /* Byte 8 Bits 3-5 */
+ unsigned rsvd1:1; /* Byte 8 Bit 6 */
+ unsigned ldev_init_done:1; /* Byte 8 Bit 7 */
+ } ldev_control; /* Byte 8 */
+ /* Logical Device Operations Status */
+ unsigned char cc_active:1; /* Byte 9 Bit 0 */
+ unsigned char rbld_active:1; /* Byte 9 Bit 1 */
+ unsigned char bg_init_active:1; /* Byte 9 Bit 2 */
+ unsigned char fg_init_active:1; /* Byte 9 Bit 3 */
+ unsigned char migration_active:1; /* Byte 9 Bit 4 */
+ unsigned char patrol_active:1; /* Byte 9 Bit 5 */
+ unsigned char rsvd2:2; /* Byte 9 Bits 6-7 */
+ unsigned char raid5_writeupdate; /* Byte 10 */
+ unsigned char raid5_algo; /* Byte 11 */
+ unsigned short ldev_num; /* Bytes 12-13 */
+ /* BIOS Info */
+ unsigned char bios_disabled:1; /* Byte 14 Bit 0 */
+ unsigned char cdrom_boot:1; /* Byte 14 Bit 1 */
+ unsigned char drv_coercion:1; /* Byte 14 Bit 2 */
+ unsigned char write_same_disabled:1; /* Byte 14 Bit 3 */
+ unsigned char hba_mode:1; /* Byte 14 Bit 4 */
+ enum {
+ MYRS_GEOMETRY_128_32 = 0x0,
+ MYRS_GEOMETRY_255_63 = 0x1,
+ MYRS_GEOMETRY_RSVD1 = 0x2,
+ MYRS_GEOMETRY_RSVD2 = 0x3
+ } __packed drv_geom:2; /* Byte 14 Bits 5-6 */
+ unsigned char super_ra_enabled:1; /* Byte 14 Bit 7 */
+ unsigned char rsvd3; /* Byte 15 */
+ /* Error Counters */
+ unsigned short soft_errs; /* Bytes 16-17 */
+ unsigned short cmds_failed; /* Bytes 18-19 */
+ unsigned short cmds_aborted; /* Bytes 20-21 */
+ unsigned short deferred_write_errs; /* Bytes 22-23 */
+ unsigned int rsvd4; /* Bytes 24-27 */
+ unsigned int rsvd5; /* Bytes 28-31 */
+ /* Device Size Information */
+ unsigned short rsvd6; /* Bytes 32-33 */
+ unsigned short devsize_bytes; /* Bytes 34-35 */
+ unsigned int orig_devsize; /* Bytes 36-39 */
+ unsigned int cfg_devsize; /* Bytes 40-43 */
+ unsigned int rsvd7; /* Bytes 44-47 */
+ unsigned char ldev_name[32]; /* Bytes 48-79 */
+ unsigned char inquiry[36]; /* Bytes 80-115 */
+ unsigned char rsvd8[12]; /* Bytes 116-127 */
+ u64 last_read_lba; /* Bytes 128-135 */
+ u64 last_write_lba; /* Bytes 136-143 */
+ u64 cc_lba; /* Bytes 144-151 */
+ u64 rbld_lba; /* Bytes 152-159 */
+ u64 bg_init_lba; /* Bytes 160-167 */
+ u64 fg_init_lba; /* Bytes 168-175 */
+ u64 migration_lba; /* Bytes 176-183 */
+ u64 patrol_lba; /* Bytes 184-191 */
+ unsigned char rsvd9[64]; /* Bytes 192-255 */
+};
+
+/*
+ * DAC960 V2 Firmware Get Physical Device Info reply structure.
+ */
+struct myrs_pdev_info {
+ unsigned char rsvd1; /* Byte 0 */
+ unsigned char channel; /* Byte 1 */
+ unsigned char target; /* Byte 2 */
+ unsigned char lun; /* Byte 3 */
+ /* Configuration Status Bits */
+ unsigned char pdev_fault_tolerant:1; /* Byte 4 Bit 0 */
+ unsigned char pdev_connected:1; /* Byte 4 Bit 1 */
+ unsigned char pdev_local_to_ctlr:1; /* Byte 4 Bit 2 */
+ unsigned char rsvd2:5; /* Byte 4 Bits 3-7 */
+ /* Multiple Host/Controller Status Bits */
+ unsigned char remote_host_dead:1; /* Byte 5 Bit 0 */
+ unsigned char remove_ctlr_dead:1; /* Byte 5 Bit 1 */
+ unsigned char rsvd3:6; /* Byte 5 Bits 2-7 */
+ enum myrs_devstate dev_state; /* Byte 6 */
+ unsigned char nego_data_width; /* Byte 7 */
+ unsigned short nego_sync_rate; /* Bytes 8-9 */
+ /* Multiported Physical Device Information */
+ unsigned char num_ports; /* Byte 10 */
+ unsigned char drv_access_bitmap; /* Byte 11 */
+ unsigned int rsvd4; /* Bytes 12-15 */
+ unsigned char ip_address[16]; /* Bytes 16-31 */
+ unsigned short max_tags; /* Bytes 32-33 */
+ /* Physical Device Operations Status */
+ unsigned char cc_in_progress:1; /* Byte 34 Bit 0 */
+ unsigned char rbld_in_progress:1; /* Byte 34 Bit 1 */
+ unsigned char makecc_in_progress:1; /* Byte 34 Bit 2 */
+ unsigned char pdevinit_in_progress:1; /* Byte 34 Bit 3 */
+ unsigned char migration_in_progress:1; /* Byte 34 Bit 4 */
+ unsigned char patrol_in_progress:1; /* Byte 34 Bit 5 */
+ unsigned char rsvd5:2; /* Byte 34 Bits 6-7 */
+ unsigned char long_op_status; /* Byte 35 */
+ unsigned char parity_errs; /* Byte 36 */
+ unsigned char soft_errs; /* Byte 37 */
+ unsigned char hard_errs; /* Byte 38 */
+ unsigned char misc_errs; /* Byte 39 */
+ unsigned char cmd_timeouts; /* Byte 40 */
+ unsigned char retries; /* Byte 41 */
+ unsigned char aborts; /* Byte 42 */
+ unsigned char pred_failures; /* Byte 43 */
+ unsigned int rsvd6; /* Bytes 44-47 */
+ unsigned short rsvd7; /* Bytes 48-49 */
+ unsigned short devsize_bytes; /* Bytes 50-51 */
+ unsigned int orig_devsize; /* Bytes 52-55 */
+ unsigned int cfg_devsize; /* Bytes 56-59 */
+ unsigned int rsvd8; /* Bytes 60-63 */
+ unsigned char pdev_name[16]; /* Bytes 64-79 */
+ unsigned char rsvd9[16]; /* Bytes 80-95 */
+ unsigned char rsvd10[32]; /* Bytes 96-127 */
+ unsigned char inquiry[36]; /* Bytes 128-163 */
+ unsigned char rsvd11[20]; /* Bytes 164-183 */
+ unsigned char rsvd12[8]; /* Bytes 184-191 */
+ u64 last_read_lba; /* Bytes 192-199 */
+ u64 last_write_lba; /* Bytes 200-207 */
+ u64 cc_lba; /* Bytes 208-215 */
+ u64 rbld_lba; /* Bytes 216-223 */
+ u64 makecc_lba; /* Bytes 224-231 */
+ u64 devinit_lba; /* Bytes 232-239 */
+ u64 migration_lba; /* Bytes 240-247 */
+ u64 patrol_lba; /* Bytes 248-255 */
+ unsigned char rsvd13[256]; /* Bytes 256-511 */
+};
+
+/*
+ * DAC960 V2 Firmware Health Status Buffer structure.
+ */
+struct myrs_fwstat {
+ unsigned int uptime_usecs; /* Bytes 0-3 */
+ unsigned int uptime_msecs; /* Bytes 4-7 */
+ unsigned int seconds; /* Bytes 8-11 */
+ unsigned char rsvd1[4]; /* Bytes 12-15 */
+ unsigned int epoch; /* Bytes 16-19 */
+ unsigned char rsvd2[4]; /* Bytes 20-23 */
+ unsigned int dbg_msgbuf_idx; /* Bytes 24-27 */
+ unsigned int coded_msgbuf_idx; /* Bytes 28-31 */
+ unsigned int cur_timetrace_page; /* Bytes 32-35 */
+ unsigned int cur_prof_page; /* Bytes 36-39 */
+ unsigned int next_evseq; /* Bytes 40-43 */
+ unsigned char rsvd3[4]; /* Bytes 44-47 */
+ unsigned char rsvd4[16]; /* Bytes 48-63 */
+ unsigned char rsvd5[64]; /* Bytes 64-127 */
+};
+
+/*
+ * DAC960 V2 Firmware Get Event reply structure.
+ */
+struct myrs_event {
+ unsigned int ev_seq; /* Bytes 0-3 */
+ unsigned int ev_time; /* Bytes 4-7 */
+ unsigned int ev_code; /* Bytes 8-11 */
+ unsigned char rsvd1; /* Byte 12 */
+ unsigned char channel; /* Byte 13 */
+ unsigned char target; /* Byte 14 */
+ unsigned char lun; /* Byte 15 */
+ unsigned int rsvd2; /* Bytes 16-19 */
+ unsigned int ev_parm; /* Bytes 20-23 */
+ unsigned char sense_data[40]; /* Bytes 24-63 */
+};
+
+/*
+ * DAC960 V2 Firmware Command Control Bits structure.
+ */
+struct myrs_cmd_ctrl {
+ unsigned char fua:1; /* Byte 0 Bit 0 */
+ unsigned char disable_pgout:1; /* Byte 0 Bit 1 */
+ unsigned char rsvd1:1; /* Byte 0 Bit 2 */
+ unsigned char add_sge_mem:1; /* Byte 0 Bit 3 */
+ unsigned char dma_ctrl_to_host:1; /* Byte 0 Bit 4 */
+ unsigned char rsvd2:1; /* Byte 0 Bit 5 */
+ unsigned char no_autosense:1; /* Byte 0 Bit 6 */
+ unsigned char disc_prohibited:1; /* Byte 0 Bit 7 */
+};
+
+/*
+ * DAC960 V2 Firmware Command Timeout structure.
+ */
+struct myrs_cmd_tmo {
+ unsigned char tmo_val:6; /* Byte 0 Bits 0-5 */
+ enum {
+ MYRS_TMO_SCALE_SECONDS = 0,
+ MYRS_TMO_SCALE_MINUTES = 1,
+ MYRS_TMO_SCALE_HOURS = 2,
+ MYRS_TMO_SCALE_RESERVED = 3
+ } __packed tmo_scale:2; /* Byte 0 Bits 6-7 */
+};
+
+/*
+ * DAC960 V2 Firmware Physical Device structure.
+ */
+struct myrs_pdev {
+ unsigned char lun; /* Byte 0 */
+ unsigned char target; /* Byte 1 */
+ unsigned char channel:3; /* Byte 2 Bits 0-2 */
+ unsigned char ctlr:5; /* Byte 2 Bits 3-7 */
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Logical Device structure.
+ */
+struct myrs_ldev {
+ unsigned short ldev_num; /* Bytes 0-1 */
+ unsigned char rsvd:3; /* Byte 2 Bits 0-2 */
+ unsigned char ctlr:5; /* Byte 2 Bits 3-7 */
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Operation Device type.
+ */
+enum myrs_opdev {
+ MYRS_PHYSICAL_DEVICE = 0x00,
+ MYRS_RAID_DEVICE = 0x01,
+ MYRS_PHYSICAL_CHANNEL = 0x02,
+ MYRS_RAID_CHANNEL = 0x03,
+ MYRS_PHYSICAL_CONTROLLER = 0x04,
+ MYRS_RAID_CONTROLLER = 0x05,
+ MYRS_CONFIGURATION_GROUP = 0x10,
+ MYRS_ENCLOSURE = 0x11,
+} __packed;
+
+/*
+ * DAC960 V2 Firmware Translate Physical To Logical Device structure.
+ */
+struct myrs_devmap {
+ unsigned short ldev_num; /* Bytes 0-1 */
+ unsigned short rsvd; /* Bytes 2-3 */
+ unsigned char prev_boot_ctlr; /* Byte 4 */
+ unsigned char prev_boot_channel; /* Byte 5 */
+ unsigned char prev_boot_target; /* Byte 6 */
+ unsigned char prev_boot_lun; /* Byte 7 */
+};
+
+/*
+ * DAC960 V2 Firmware Scatter/Gather List Entry structure.
+ */
+struct myrs_sge {
+ u64 sge_addr; /* Bytes 0-7 */
+ u64 sge_count; /* Bytes 8-15 */
+};
+
+/*
+ * DAC960 V2 Firmware Data Transfer Memory Address structure.
+ */
+union myrs_sgl {
+ struct myrs_sge sge[2]; /* Bytes 0-31 */
+ struct {
+ unsigned short sge0_len; /* Bytes 0-1 */
+ unsigned short sge1_len; /* Bytes 2-3 */
+ unsigned short sge2_len; /* Bytes 4-5 */
+ unsigned short rsvd; /* Bytes 6-7 */
+ u64 sge0_addr; /* Bytes 8-15 */
+ u64 sge1_addr; /* Bytes 16-23 */
+ u64 sge2_addr; /* Bytes 24-31 */
+ } ext;
+};
+
+/*
+ * 64 Byte DAC960 V2 Firmware Command Mailbox structure.
+ */
+union myrs_cmd_mbox {
+ unsigned int words[16]; /* Words 0-15 */
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ unsigned int rsvd1:24; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char rsvd2[10]; /* Bytes 22-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } common;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size; /* Bytes 4-7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_pdev pdev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ unsigned char cdb_len; /* Byte 21 */
+ unsigned char cdb[10]; /* Bytes 22-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } SCSI_10;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size; /* Bytes 4-7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_pdev pdev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ unsigned char cdb_len; /* Byte 21 */
+ unsigned short rsvd; /* Bytes 22-23 */
+ u64 cdb_addr; /* Bytes 24-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } SCSI_255;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ unsigned short rsvd1; /* Bytes 16-17 */
+ unsigned char ctlr_num; /* Byte 18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char rsvd2[10]; /* Bytes 22-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } ctlr_info;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_ldev ldev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char rsvd[10]; /* Bytes 22-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } ldev_info;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_pdev pdev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char rsvd[10]; /* Bytes 22-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } pdev_info;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ unsigned short evnum_upper; /* Bytes 16-17 */
+ unsigned char ctlr_num; /* Byte 18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned short evnum_lower; /* Bytes 22-23 */
+ unsigned char rsvd[8]; /* Bytes 24-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } get_event;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ union {
+ struct myrs_ldev ldev; /* Bytes 16-18 */
+ struct myrs_pdev pdev; /* Bytes 16-18 */
+ };
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ enum myrs_devstate state; /* Byte 22 */
+ unsigned char rsvd[9]; /* Bytes 23-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } set_devstate;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_ldev ldev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char restore_consistency:1; /* Byte 22 Bit 0 */
+ unsigned char initialized_area_only:1; /* Byte 22 Bit 1 */
+ unsigned char rsvd1:6; /* Byte 22 Bits 2-7 */
+ unsigned char rsvd2[9]; /* Bytes 23-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } cc;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ unsigned char first_cmd_mbox_size_kb; /* Byte 4 */
+ unsigned char first_stat_mbox_size_kb; /* Byte 5 */
+ unsigned char second_cmd_mbox_size_kb; /* Byte 6 */
+ unsigned char second_stat_mbox_size_kb; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ unsigned int rsvd1:24; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ unsigned char fwstat_buf_size_kb; /* Byte 22 */
+ unsigned char rsvd2; /* Byte 23 */
+ u64 fwstat_buf_addr; /* Bytes 24-31 */
+ u64 first_cmd_mbox_addr; /* Bytes 32-39 */
+ u64 first_stat_mbox_addr; /* Bytes 40-47 */
+ u64 second_cmd_mbox_addr; /* Bytes 48-55 */
+ u64 second_stat_mbox_addr; /* Bytes 56-63 */
+ } set_mbox;
+ struct {
+ unsigned short id; /* Bytes 0-1 */
+ enum myrs_cmd_opcode opcode; /* Byte 2 */
+ struct myrs_cmd_ctrl control; /* Byte 3 */
+ u32 dma_size:24; /* Bytes 4-6 */
+ unsigned char dma_num; /* Byte 7 */
+ u64 sense_addr; /* Bytes 8-15 */
+ struct myrs_pdev pdev; /* Bytes 16-18 */
+ struct myrs_cmd_tmo tmo; /* Byte 19 */
+ unsigned char sense_len; /* Byte 20 */
+ enum myrs_ioctl_opcode ioctl_opcode; /* Byte 21 */
+ enum myrs_opdev opdev; /* Byte 22 */
+ unsigned char rsvd[9]; /* Bytes 23-31 */
+ union myrs_sgl dma_addr; /* Bytes 32-63 */
+ } dev_op;
+};
+
+/*
+ * DAC960 V2 Firmware Controller Status Mailbox structure.
+ */
+struct myrs_stat_mbox {
+ unsigned short id; /* Bytes 0-1 */
+ unsigned char status; /* Byte 2 */
+ unsigned char sense_len; /* Byte 3 */
+ int residual; /* Bytes 4-7 */
+};
+
+struct myrs_cmdblk {
+ union myrs_cmd_mbox mbox;
+ unsigned char status;
+ unsigned char sense_len;
+ int residual;
+ struct completion *complete;
+ struct myrs_sge *sgl;
+ dma_addr_t sgl_addr;
+ unsigned char *dcdb;
+ dma_addr_t dcdb_dma;
+ unsigned char *sense;
+ dma_addr_t sense_addr;
+};
+
+/*
+ * DAC960 Driver Controller structure.
+ */
+struct myrs_hba {
+ void __iomem *io_base;
+ void __iomem *mmio_base;
+ phys_addr_t io_addr;
+ phys_addr_t pci_addr;
+ unsigned int irq;
+
+ unsigned char model_name[28];
+ unsigned char fw_version[12];
+
+ struct Scsi_Host *host;
+ struct pci_dev *pdev;
+
+ unsigned int epoch;
+ unsigned int next_evseq;
+ /* Monitor flags */
+ bool needs_update;
+ bool disable_enc_msg;
+
+ struct workqueue_struct *work_q;
+ char work_q_name[20];
+ struct delayed_work monitor_work;
+ unsigned long primary_monitor_time;
+ unsigned long secondary_monitor_time;
+
+ spinlock_t queue_lock;
+
+ struct dma_pool *sg_pool;
+ struct dma_pool *sense_pool;
+ struct dma_pool *dcdb_pool;
+
+ void (*write_cmd_mbox)(union myrs_cmd_mbox *next_mbox,
+ union myrs_cmd_mbox *cmd_mbox);
+ void (*get_cmd_mbox)(void __iomem *base);
+ void (*disable_intr)(void __iomem *base);
+ void (*reset)(void __iomem *base);
+
+ dma_addr_t cmd_mbox_addr;
+ size_t cmd_mbox_size;
+ union myrs_cmd_mbox *first_cmd_mbox;
+ union myrs_cmd_mbox *last_cmd_mbox;
+ union myrs_cmd_mbox *next_cmd_mbox;
+ union myrs_cmd_mbox *prev_cmd_mbox1;
+ union myrs_cmd_mbox *prev_cmd_mbox2;
+
+ dma_addr_t stat_mbox_addr;
+ size_t stat_mbox_size;
+ struct myrs_stat_mbox *first_stat_mbox;
+ struct myrs_stat_mbox *last_stat_mbox;
+ struct myrs_stat_mbox *next_stat_mbox;
+
+ struct myrs_cmdblk dcmd_blk;
+ struct myrs_cmdblk mcmd_blk;
+ struct mutex dcmd_mutex;
+
+ struct myrs_fwstat *fwstat_buf;
+ dma_addr_t fwstat_addr;
+
+ struct myrs_ctlr_info *ctlr_info;
+ struct mutex cinfo_mutex;
+
+ struct myrs_event *event_buf;
+};
+
+typedef unsigned char (*enable_mbox_t)(void __iomem *base, dma_addr_t addr);
+typedef int (*myrs_hwinit_t)(struct pci_dev *pdev,
+ struct myrs_hba *c, void __iomem *base);
+
+struct myrs_privdata {
+ myrs_hwinit_t hw_init;
+ irq_handler_t irq_handler;
+ unsigned int mmio_size;
+};
+
+/*
+ * DAC960 GEM Series Controller Interface Register Offsets.
+ */
+
+#define DAC960_GEM_mmio_size 0x600
+
+enum DAC960_GEM_reg_offset {
+ DAC960_GEM_IDB_READ_OFFSET = 0x214,
+ DAC960_GEM_IDB_CLEAR_OFFSET = 0x218,
+ DAC960_GEM_ODB_READ_OFFSET = 0x224,
+ DAC960_GEM_ODB_CLEAR_OFFSET = 0x228,
+ DAC960_GEM_IRQSTS_OFFSET = 0x208,
+ DAC960_GEM_IRQMASK_READ_OFFSET = 0x22C,
+ DAC960_GEM_IRQMASK_CLEAR_OFFSET = 0x230,
+ DAC960_GEM_CMDMBX_OFFSET = 0x510,
+ DAC960_GEM_CMDSTS_OFFSET = 0x518,
+ DAC960_GEM_ERRSTS_READ_OFFSET = 0x224,
+ DAC960_GEM_ERRSTS_CLEAR_OFFSET = 0x228,
+};
+
+/*
+ * DAC960 GEM Series Inbound Door Bell Register.
+ */
+#define DAC960_GEM_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_GEM_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_GEM_IDB_GEN_IRQ 0x04
+#define DAC960_GEM_IDB_CTRL_RESET 0x08
+#define DAC960_GEM_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_GEM_IDB_HWMBOX_FULL 0x01
+#define DAC960_GEM_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 GEM Series Outbound Door Bell Register.
+ */
+#define DAC960_GEM_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_GEM_ODB_MMBOX_ACK_IRQ 0x02
+#define DAC960_GEM_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_GEM_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 GEM Series Interrupt Mask Register.
+ */
+#define DAC960_GEM_IRQMASK_HWMBOX_IRQ 0x01
+#define DAC960_GEM_IRQMASK_MMBOX_IRQ 0x02
+
+/*
+ * DAC960 GEM Series Error Status Register.
+ */
+#define DAC960_GEM_ERRSTS_PENDING 0x20
+
+/*
+ * dma_addr_writeql is provided to write dma_addr_t types
+ * to a 64-bit pci address space register. The controller
+ * will accept having the register written as two 32-bit
+ * values.
+ *
+ * In HIGHMEM kernels, dma_addr_t is a 64-bit value.
+ * without HIGHMEM, dma_addr_t is a 32-bit value.
+ *
+ * The compiler should always fix up the assignment
+ * to u.wq appropriately, depending upon the size of
+ * dma_addr_t.
+ */
+static inline
+void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address)
+{
+ union {
+ u64 wq;
+ uint wl[2];
+ } u;
+
+ u.wq = addr;
+
+ writel(u.wl[0], write_address);
+ writel(u.wl[1], write_address + 4);
+}
+
+/*
+ * DAC960 BA Series Controller Interface Register Offsets.
+ */
+
+#define DAC960_BA_mmio_size 0x80
+
+enum DAC960_BA_reg_offset {
+ DAC960_BA_IRQSTS_OFFSET = 0x30,
+ DAC960_BA_IRQMASK_OFFSET = 0x34,
+ DAC960_BA_CMDMBX_OFFSET = 0x50,
+ DAC960_BA_CMDSTS_OFFSET = 0x58,
+ DAC960_BA_IDB_OFFSET = 0x60,
+ DAC960_BA_ODB_OFFSET = 0x61,
+ DAC960_BA_ERRSTS_OFFSET = 0x63,
+};
+
+/*
+ * DAC960 BA Series Inbound Door Bell Register.
+ */
+#define DAC960_BA_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_BA_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_BA_IDB_GEN_IRQ 0x04
+#define DAC960_BA_IDB_CTRL_RESET 0x08
+#define DAC960_BA_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_BA_IDB_HWMBOX_EMPTY 0x01
+#define DAC960_BA_IDB_INIT_DONE 0x02
+
+/*
+ * DAC960 BA Series Outbound Door Bell Register.
+ */
+#define DAC960_BA_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_BA_ODB_MMBOX_ACK_IRQ 0x02
+
+#define DAC960_BA_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_BA_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 BA Series Interrupt Mask Register.
+ */
+#define DAC960_BA_IRQMASK_DISABLE_IRQ 0x04
+#define DAC960_BA_IRQMASK_DISABLEW_I2O 0x08
+
+/*
+ * DAC960 BA Series Error Status Register.
+ */
+#define DAC960_BA_ERRSTS_PENDING 0x04
+
+/*
+ * DAC960 LP Series Controller Interface Register Offsets.
+ */
+
+#define DAC960_LP_mmio_size 0x80
+
+enum DAC960_LP_reg_offset {
+ DAC960_LP_CMDMBX_OFFSET = 0x10,
+ DAC960_LP_CMDSTS_OFFSET = 0x18,
+ DAC960_LP_IDB_OFFSET = 0x20,
+ DAC960_LP_ODB_OFFSET = 0x2C,
+ DAC960_LP_ERRSTS_OFFSET = 0x2E,
+ DAC960_LP_IRQSTS_OFFSET = 0x30,
+ DAC960_LP_IRQMASK_OFFSET = 0x34,
+};
+
+/*
+ * DAC960 LP Series Inbound Door Bell Register.
+ */
+#define DAC960_LP_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_LP_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_LP_IDB_GEN_IRQ 0x04
+#define DAC960_LP_IDB_CTRL_RESET 0x08
+#define DAC960_LP_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_LP_IDB_HWMBOX_FULL 0x01
+#define DAC960_LP_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 LP Series Outbound Door Bell Register.
+ */
+#define DAC960_LP_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_LP_ODB_MMBOX_ACK_IRQ 0x02
+
+#define DAC960_LP_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_LP_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 LP Series Interrupt Mask Register.
+ */
+#define DAC960_LP_IRQMASK_DISABLE_IRQ 0x04
+
+/*
+ * DAC960 LP Series Error Status Register.
+ */
+#define DAC960_LP_ERRSTS_PENDING 0x04
+
+#endif /* _MYRS_H */
--
2.16.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface)
2018-10-12 7:15 ` [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface) Hannes Reinecke
@ 2018-10-17 7:28 ` Christoph Hellwig
0 siblings, 0 replies; 13+ messages in thread
From: Christoph Hellwig @ 2018-10-17 7:28 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Jens Axboe, Martin K. Petersen, Christoph Hellwig,
James Bottomley, linux-scsi, linux-block, Hannes Reinecke
On Fri, Oct 12, 2018 at 09:15:47AM +0200, Hannes Reinecke wrote:
> This patch adds support for the Mylex DAC960 RAID controller,
> supporting the newer, SCSI-based interface.
> The driver is a re-implementation of the original DAC960 driver.
>
> Signed-off-by: Hannes Reinecke <hare@suse.com>
> ---
> MAINTAINERS | 1 +
> drivers/scsi/Kconfig | 15 +
> drivers/scsi/Makefile | 1 +
> drivers/scsi/myrs.c | 3267 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/scsi/myrs.h | 1134 +++++++++++++++++
> 5 files changed, 4418 insertions(+)
> create mode 100644 drivers/scsi/myrs.c
> create mode 100644 drivers/scsi/myrs.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f6dde2ff49b3..adc23290c28d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9897,6 +9897,7 @@ M: Hannes Reinecke <hare@kernel.org>
> L: linux-scsi@vger.kernel.org
> S: Supported
> F: drivers/scsi/myrb.*
> +F: drivers/scsi/myrs.*
>
> MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
> M: Chris Lee <christopher.lee@cspi.com>
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index f2a71bb74f48..c1d3d0d45ced 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -572,6 +572,21 @@ config SCSI_MYRB
> To compile this driver as a module, choose M here: the
> module will be called myrb.
>
> +config SCSI_MYRS
> + tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
> + depends on PCI
> + select RAID_ATTRS
> + help
> + This driver adds support for the Mylex DAC960, AcceleRAID, and
> + eXtremeRAID PCI RAID controllers. This driver supports the
> + newer, SCSI-based interface only.
> + This driver is a reimplementation of the original DAC960
> + driver. If you have used the DAC960 driver you should enable
> + this module.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called myrs.
> +
> config VMWARE_PVSCSI
> tristate "VMware PVSCSI driver support"
> depends on PCI && SCSI && X86
> diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
> index cfd58ffc0b61..fcb41ae329c4 100644
> --- a/drivers/scsi/Makefile
> +++ b/drivers/scsi/Makefile
> @@ -107,6 +107,7 @@ obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
> obj-$(CONFIG_SCSI_MESH) += mesh.o
> obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
> obj-$(CONFIG_SCSI_MYRB) += myrb.o
> +obj-$(CONFIG_SCSI_MYRS) += myrs.o
> obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
> obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
> obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
> diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
> new file mode 100644
> index 000000000000..8cf0a5924290
> --- /dev/null
> +++ b/drivers/scsi/myrs.c
> @@ -0,0 +1,3267 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
> + *
> + * This driver supports the newer, SCSI-based firmware interface only.
> + *
> + * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
> + *
> + * Based on the original DAC960 driver, which has
> + * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
> + * Portions Copyright 2002 by Mylex (An IBM Business Unit)
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/pci.h>
> +#include <linux/raid_class.h>
> +#include <asm/unaligned.h>
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_host.h>
> +#include <scsi/scsi_device.h>
> +#include <scsi/scsi_cmnd.h>
> +#include <scsi/scsi_tcq.h>
> +#include "myrs.h"
> +
> +static struct raid_template *myrs_raid_template;
> +
> +static struct myrs_devstate_name_entry {
> + enum myrs_devstate state;
> + char *name;
> +} myrs_devstate_name_list[] = {
> + { MYRS_DEVICE_UNCONFIGURED, "Unconfigured" },
> + { MYRS_DEVICE_ONLINE, "Online" },
> + { MYRS_DEVICE_REBUILD, "Rebuild" },
> + { MYRS_DEVICE_MISSING, "Missing" },
> + { MYRS_DEVICE_SUSPECTED_CRITICAL, "SuspectedCritical" },
> + { MYRS_DEVICE_OFFLINE, "Offline" },
> + { MYRS_DEVICE_CRITICAL, "Critical" },
> + { MYRS_DEVICE_SUSPECTED_DEAD, "SuspectedDead" },
> + { MYRS_DEVICE_COMMANDED_OFFLINE, "CommandedOffline" },
> + { MYRS_DEVICE_STANDBY, "Standby" },
> + { MYRS_DEVICE_INVALID_STATE, "Invalid" },
> +};
> +
> +static char *myrs_devstate_name(enum myrs_devstate state)
> +{
> + struct myrs_devstate_name_entry *entry = myrs_devstate_name_list;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(myrs_devstate_name_list); i++) {
> + if (entry[i].state == state)
> + return entry[i].name;
> + }
> + return NULL;
> +}
> +
> +static struct myrs_raid_level_name_entry {
> + enum myrs_raid_level level;
> + char *name;
> +} myrs_raid_level_name_list[] = {
> + { MYRS_RAID_LEVEL0, "RAID0" },
> + { MYRS_RAID_LEVEL1, "RAID1" },
> + { MYRS_RAID_LEVEL3, "RAID3 right asymmetric parity" },
> + { MYRS_RAID_LEVEL5, "RAID5 right asymmetric parity" },
> + { MYRS_RAID_LEVEL6, "RAID6" },
> + { MYRS_RAID_JBOD, "JBOD" },
> + { MYRS_RAID_NEWSPAN, "New Mylex SPAN" },
> + { MYRS_RAID_LEVEL3F, "RAID3 fixed parity" },
> + { MYRS_RAID_LEVEL3L, "RAID3 left symmetric parity" },
> + { MYRS_RAID_SPAN, "Mylex SPAN" },
> + { MYRS_RAID_LEVEL5L, "RAID5 left symmetric parity" },
> + { MYRS_RAID_LEVELE, "RAIDE (concatenation)" },
> + { MYRS_RAID_PHYSICAL, "Physical device" },
> +};
> +
> +static char *myrs_raid_level_name(enum myrs_raid_level level)
> +{
> + struct myrs_raid_level_name_entry *entry = myrs_raid_level_name_list;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(myrs_raid_level_name_list); i++) {
> + if (entry[i].level == level)
> + return entry[i].name;
> + }
> + return NULL;
> +}
> +
> +/**
> + * myrs_reset_cmd - clears critical fields in struct myrs_cmdblk
> + */
> +static inline void myrs_reset_cmd(struct myrs_cmdblk *cmd_blk)
> +{
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> +
> + memset(mbox, 0, sizeof(union myrs_cmd_mbox));
> + cmd_blk->status = 0;
> +}
> +
> +/**
> + * myrs_qcmd - queues Command for DAC960 V2 Series Controllers.
> + */
> +static void myrs_qcmd(struct myrs_hba *cs, struct myrs_cmdblk *cmd_blk)
> +{
> + void __iomem *base = cs->io_base;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + union myrs_cmd_mbox *next_mbox = cs->next_cmd_mbox;
> +
> + cs->write_cmd_mbox(next_mbox, mbox);
> +
> + if (cs->prev_cmd_mbox1->words[0] == 0 ||
> + cs->prev_cmd_mbox2->words[0] == 0)
> + cs->get_cmd_mbox(base);
> +
> + cs->prev_cmd_mbox2 = cs->prev_cmd_mbox1;
> + cs->prev_cmd_mbox1 = next_mbox;
> +
> + if (++next_mbox > cs->last_cmd_mbox)
> + next_mbox = cs->first_cmd_mbox;
> +
> + cs->next_cmd_mbox = next_mbox;
> +}
> +
> +/**
> + * myrs_exec_cmd - executes V2 Command and waits for completion.
> + */
> +static void myrs_exec_cmd(struct myrs_hba *cs,
> + struct myrs_cmdblk *cmd_blk)
> +{
> + DECLARE_COMPLETION_ONSTACK(complete);
> + unsigned long flags;
> +
> + cmd_blk->complete = &complete;
> + spin_lock_irqsave(&cs->queue_lock, flags);
> + myrs_qcmd(cs, cmd_blk);
> + spin_unlock_irqrestore(&cs->queue_lock, flags);
> +
> + WARN_ON(in_interrupt());
> + wait_for_completion(&complete);
> +}
> +
> +/**
> + * myrs_report_progress - prints progress message
> + */
> +static void myrs_report_progress(struct myrs_hba *cs, unsigned short ldev_num,
> + unsigned char *msg, unsigned long blocks,
> + unsigned long size)
> +{
> + shost_printk(KERN_INFO, cs->host,
> + "Logical Drive %d: %s in Progress: %d%% completed\n",
> + ldev_num, msg,
> + (100 * (int)(blocks >> 7)) / (int)(size >> 7));
> +}
> +
> +/**
> + * myrs_get_ctlr_info - executes a Controller Information IOCTL Command
> + */
> +static unsigned char myrs_get_ctlr_info(struct myrs_hba *cs)
> +{
> + struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + dma_addr_t ctlr_info_addr;
> + union myrs_sgl *sgl;
> + unsigned char status;
> + struct myrs_ctlr_info old;
> +
> + memcpy(&old, cs->ctlr_info, sizeof(struct myrs_ctlr_info));
> + ctlr_info_addr = dma_map_single(&cs->pdev->dev, cs->ctlr_info,
> + sizeof(struct myrs_ctlr_info),
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(&cs->pdev->dev, ctlr_info_addr))
> + return MYRS_STATUS_FAILED;
> +
> + mutex_lock(&cs->dcmd_mutex);
> + myrs_reset_cmd(cmd_blk);
> + mbox->ctlr_info.id = MYRS_DCMD_TAG;
> + mbox->ctlr_info.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->ctlr_info.control.dma_ctrl_to_host = true;
> + mbox->ctlr_info.control.no_autosense = true;
> + mbox->ctlr_info.dma_size = sizeof(struct myrs_ctlr_info);
> + mbox->ctlr_info.ctlr_num = 0;
> + mbox->ctlr_info.ioctl_opcode = MYRS_IOCTL_GET_CTLR_INFO;
> + sgl = &mbox->ctlr_info.dma_addr;
> + sgl->sge[0].sge_addr = ctlr_info_addr;
> + sgl->sge[0].sge_count = mbox->ctlr_info.dma_size;
> + dev_dbg(&cs->host->shost_gendev, "Sending GetControllerInfo\n");
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + mutex_unlock(&cs->dcmd_mutex);
> + dma_unmap_single(&cs->pdev->dev, ctlr_info_addr,
> + sizeof(struct myrs_ctlr_info), DMA_FROM_DEVICE);
> + if (status == MYRS_STATUS_SUCCESS) {
> + if (cs->ctlr_info->bg_init_active +
> + cs->ctlr_info->ldev_init_active +
> + cs->ctlr_info->pdev_init_active +
> + cs->ctlr_info->cc_active +
> + cs->ctlr_info->rbld_active +
> + cs->ctlr_info->exp_active != 0)
> + cs->needs_update = true;
> + if (cs->ctlr_info->ldev_present != old.ldev_present ||
> + cs->ctlr_info->ldev_critical != old.ldev_critical ||
> + cs->ctlr_info->ldev_offline != old.ldev_offline)
> + shost_printk(KERN_INFO, cs->host,
> + "Logical drive count changes (%d/%d/%d)\n",
> + cs->ctlr_info->ldev_critical,
> + cs->ctlr_info->ldev_offline,
> + cs->ctlr_info->ldev_present);
> + }
> +
> + return status;
> +}
> +
> +/**
> + * myrs_get_ldev_info - executes a Logical Device Information IOCTL Command
> + */
> +static unsigned char myrs_get_ldev_info(struct myrs_hba *cs,
> + unsigned short ldev_num, struct myrs_ldev_info *ldev_info)
> +{
> + struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + dma_addr_t ldev_info_addr;
> + struct myrs_ldev_info ldev_info_orig;
> + union myrs_sgl *sgl;
> + unsigned char status;
> +
> + memcpy(&ldev_info_orig, ldev_info, sizeof(struct myrs_ldev_info));
> + ldev_info_addr = dma_map_single(&cs->pdev->dev, ldev_info,
> + sizeof(struct myrs_ldev_info),
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(&cs->pdev->dev, ldev_info_addr))
> + return MYRS_STATUS_FAILED;
> +
> + mutex_lock(&cs->dcmd_mutex);
> + myrs_reset_cmd(cmd_blk);
> + mbox->ldev_info.id = MYRS_DCMD_TAG;
> + mbox->ldev_info.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->ldev_info.control.dma_ctrl_to_host = true;
> + mbox->ldev_info.control.no_autosense = true;
> + mbox->ldev_info.dma_size = sizeof(struct myrs_ldev_info);
> + mbox->ldev_info.ldev.ldev_num = ldev_num;
> + mbox->ldev_info.ioctl_opcode = MYRS_IOCTL_GET_LDEV_INFO_VALID;
> + sgl = &mbox->ldev_info.dma_addr;
> + sgl->sge[0].sge_addr = ldev_info_addr;
> + sgl->sge[0].sge_count = mbox->ldev_info.dma_size;
> + dev_dbg(&cs->host->shost_gendev,
> + "Sending GetLogicalDeviceInfoValid for ldev %d\n", ldev_num);
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + mutex_unlock(&cs->dcmd_mutex);
> + dma_unmap_single(&cs->pdev->dev, ldev_info_addr,
> + sizeof(struct myrs_ldev_info), DMA_FROM_DEVICE);
> + if (status == MYRS_STATUS_SUCCESS) {
> + unsigned short ldev_num = ldev_info->ldev_num;
> + struct myrs_ldev_info *new = ldev_info;
> + struct myrs_ldev_info *old = &ldev_info_orig;
> + unsigned long ldev_size = new->cfg_devsize;
> +
> + if (new->dev_state != old->dev_state) {
> + const char *name;
> +
> + name = myrs_devstate_name(new->dev_state);
> + shost_printk(KERN_INFO, cs->host,
> + "Logical Drive %d is now %s\n",
> + ldev_num, name ? name : "Invalid");
> + }
> + if ((new->soft_errs != old->soft_errs) ||
> + (new->cmds_failed != old->cmds_failed) ||
> + (new->deferred_write_errs != old->deferred_write_errs))
> + shost_printk(KERN_INFO, cs->host,
> + "Logical Drive %d Errors: Soft = %d, Failed = %d, Deferred Write = %d\n",
> + ldev_num, new->soft_errs,
> + new->cmds_failed,
> + new->deferred_write_errs);
> + if (new->bg_init_active)
> + myrs_report_progress(cs, ldev_num,
> + "Background Initialization",
> + new->bg_init_lba, ldev_size);
> + else if (new->fg_init_active)
> + myrs_report_progress(cs, ldev_num,
> + "Foreground Initialization",
> + new->fg_init_lba, ldev_size);
> + else if (new->migration_active)
> + myrs_report_progress(cs, ldev_num,
> + "Data Migration",
> + new->migration_lba, ldev_size);
> + else if (new->patrol_active)
> + myrs_report_progress(cs, ldev_num,
> + "Patrol Operation",
> + new->patrol_lba, ldev_size);
> + if (old->bg_init_active && !new->bg_init_active)
> + shost_printk(KERN_INFO, cs->host,
> + "Logical Drive %d: Background Initialization %s\n",
> + ldev_num,
> + (new->ldev_control.ldev_init_done ?
> + "Completed" : "Failed"));
> + }
> + return status;
> +}
> +
> +/**
> + * myrs_get_pdev_info - executes a "Read Physical Device Information" Command
> + */
> +static unsigned char myrs_get_pdev_info(struct myrs_hba *cs,
> + unsigned char channel, unsigned char target, unsigned char lun,
> + struct myrs_pdev_info *pdev_info)
> +{
> + struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + dma_addr_t pdev_info_addr;
> + union myrs_sgl *sgl;
> + unsigned char status;
> +
> + pdev_info_addr = dma_map_single(&cs->pdev->dev, pdev_info,
> + sizeof(struct myrs_pdev_info),
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(&cs->pdev->dev, pdev_info_addr))
> + return MYRS_STATUS_FAILED;
> +
> + mutex_lock(&cs->dcmd_mutex);
> + myrs_reset_cmd(cmd_blk);
> + mbox->pdev_info.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->pdev_info.id = MYRS_DCMD_TAG;
> + mbox->pdev_info.control.dma_ctrl_to_host = true;
> + mbox->pdev_info.control.no_autosense = true;
> + mbox->pdev_info.dma_size = sizeof(struct myrs_pdev_info);
> + mbox->pdev_info.pdev.lun = lun;
> + mbox->pdev_info.pdev.target = target;
> + mbox->pdev_info.pdev.channel = channel;
> + mbox->pdev_info.ioctl_opcode = MYRS_IOCTL_GET_PDEV_INFO_VALID;
> + sgl = &mbox->pdev_info.dma_addr;
> + sgl->sge[0].sge_addr = pdev_info_addr;
> + sgl->sge[0].sge_count = mbox->pdev_info.dma_size;
> + dev_dbg(&cs->host->shost_gendev,
> + "Sending GetPhysicalDeviceInfoValid for pdev %d:%d:%d\n",
> + channel, target, lun);
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + mutex_unlock(&cs->dcmd_mutex);
> + dma_unmap_single(&cs->pdev->dev, pdev_info_addr,
> + sizeof(struct myrs_pdev_info), DMA_FROM_DEVICE);
> + return status;
> +}
> +
> +/**
> + * myrs_dev_op - executes a "Device Operation" Command
> + */
> +static unsigned char myrs_dev_op(struct myrs_hba *cs,
> + enum myrs_ioctl_opcode opcode, enum myrs_opdev opdev)
> +{
> + struct myrs_cmdblk *cmd_blk = &cs->dcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + unsigned char status;
> +
> + mutex_lock(&cs->dcmd_mutex);
> + myrs_reset_cmd(cmd_blk);
> + mbox->dev_op.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->dev_op.id = MYRS_DCMD_TAG;
> + mbox->dev_op.control.dma_ctrl_to_host = true;
> + mbox->dev_op.control.no_autosense = true;
> + mbox->dev_op.ioctl_opcode = opcode;
> + mbox->dev_op.opdev = opdev;
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + mutex_unlock(&cs->dcmd_mutex);
> + return status;
> +}
> +
> +/**
> + * myrs_translate_pdev - translates a Physical Device Channel and
> + * TargetID into a Logical Device.
> + */
> +static unsigned char myrs_translate_pdev(struct myrs_hba *cs,
> + unsigned char channel, unsigned char target, unsigned char lun,
> + struct myrs_devmap *devmap)
> +{
> + struct pci_dev *pdev = cs->pdev;
> + dma_addr_t devmap_addr;
> + struct myrs_cmdblk *cmd_blk;
> + union myrs_cmd_mbox *mbox;
> + union myrs_sgl *sgl;
> + unsigned char status;
> +
> + memset(devmap, 0x0, sizeof(struct myrs_devmap));
> + devmap_addr = dma_map_single(&pdev->dev, devmap,
> + sizeof(struct myrs_devmap),
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(&pdev->dev, devmap_addr))
> + return MYRS_STATUS_FAILED;
> +
> + mutex_lock(&cs->dcmd_mutex);
> + cmd_blk = &cs->dcmd_blk;
> + mbox = &cmd_blk->mbox;
> + mbox->pdev_info.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->pdev_info.control.dma_ctrl_to_host = true;
> + mbox->pdev_info.control.no_autosense = true;
> + mbox->pdev_info.dma_size = sizeof(struct myrs_devmap);
> + mbox->pdev_info.pdev.target = target;
> + mbox->pdev_info.pdev.channel = channel;
> + mbox->pdev_info.pdev.lun = lun;
> + mbox->pdev_info.ioctl_opcode = MYRS_IOCTL_XLATE_PDEV_TO_LDEV;
> + sgl = &mbox->pdev_info.dma_addr;
> + sgl->sge[0].sge_addr = devmap_addr;
> + sgl->sge[0].sge_count = mbox->pdev_info.dma_size;
> +
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + mutex_unlock(&cs->dcmd_mutex);
> + dma_unmap_single(&pdev->dev, devmap_addr,
> + sizeof(struct myrs_devmap), DMA_FROM_DEVICE);
> + return status;
> +}
> +
> +/**
> + * myrs_get_event - executes a Get Event Command
> + */
> +static unsigned char myrs_get_event(struct myrs_hba *cs,
> + unsigned int event_num, struct myrs_event *event_buf)
> +{
> + struct pci_dev *pdev = cs->pdev;
> + dma_addr_t event_addr;
> + struct myrs_cmdblk *cmd_blk = &cs->mcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + union myrs_sgl *sgl;
> + unsigned char status;
> +
> + event_addr = dma_map_single(&pdev->dev, event_buf,
> + sizeof(struct myrs_event), DMA_FROM_DEVICE);
> + if (dma_mapping_error(&pdev->dev, event_addr))
> + return MYRS_STATUS_FAILED;
> +
> + mbox->get_event.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->get_event.dma_size = sizeof(struct myrs_event);
> + mbox->get_event.evnum_upper = event_num >> 16;
> + mbox->get_event.ctlr_num = 0;
> + mbox->get_event.ioctl_opcode = MYRS_IOCTL_GET_EVENT;
> + mbox->get_event.evnum_lower = event_num & 0xFFFF;
> + sgl = &mbox->get_event.dma_addr;
> + sgl->sge[0].sge_addr = event_addr;
> + sgl->sge[0].sge_count = mbox->get_event.dma_size;
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> + dma_unmap_single(&pdev->dev, event_addr,
> + sizeof(struct myrs_event), DMA_FROM_DEVICE);
> +
> + return status;
> +}
> +
> +/*
> + * myrs_get_fwstatus - executes a Get Health Status Command
> + */
> +static unsigned char myrs_get_fwstatus(struct myrs_hba *cs)
> +{
> + struct myrs_cmdblk *cmd_blk = &cs->mcmd_blk;
> + union myrs_cmd_mbox *mbox = &cmd_blk->mbox;
> + union myrs_sgl *sgl;
> + unsigned char status = cmd_blk->status;
> +
> + myrs_reset_cmd(cmd_blk);
> + mbox->common.opcode = MYRS_CMD_OP_IOCTL;
> + mbox->common.id = MYRS_MCMD_TAG;
> + mbox->common.control.dma_ctrl_to_host = true;
> + mbox->common.control.no_autosense = true;
> + mbox->common.dma_size = sizeof(struct myrs_fwstat);
> + mbox->common.ioctl_opcode = MYRS_IOCTL_GET_HEALTH_STATUS;
> + sgl = &mbox->common.dma_addr;
> + sgl->sge[0].sge_addr = cs->fwstat_addr;
> + sgl->sge[0].sge_count = mbox->ctlr_info.dma_size;
> + dev_dbg(&cs->host->shost_gendev, "Sending GetHealthStatus\n");
> + myrs_exec_cmd(cs, cmd_blk);
> + status = cmd_blk->status;
> +
> + return status;
> +}
> +
> +/**
> + * myrs_enable_mmio_mbox - enables the Memory Mailbox Interface
> + */
> +static bool myrs_enable_mmio_mbox(struct myrs_hba *cs,
> + enable_mbox_t enable_mbox_fn)
> +{
> + void __iomem *base = cs->io_base;
> + struct pci_dev *pdev = cs->pdev;
> + union myrs_cmd_mbox *cmd_mbox;
> + struct myrs_stat_mbox *stat_mbox;
> + union myrs_cmd_mbox *mbox;
> + dma_addr_t mbox_addr;
> + unsigned char status = MYRS_STATUS_FAILED;
> +
> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
> + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
Please use dma_set_mask.
Except for that, the pci_ids.h issue mentioned in the previous patch
this looks fine:
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/3] drivers/block: Remove DAC960 driver
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
2018-10-12 7:15 ` [PATCH 1/3] myrb: Add Mylex RAID controller (block interface) Hannes Reinecke
2018-10-12 7:15 ` [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface) Hannes Reinecke
@ 2018-10-12 7:15 ` Hannes Reinecke
2018-10-17 7:28 ` Christoph Hellwig
2018-10-12 13:38 ` [PATCHv5 0/3] Deprecate " Bart Van Assche
2018-10-17 14:19 ` Jens Axboe
4 siblings, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2018-10-12 7:15 UTC (permalink / raw)
To: Jens Axboe
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block, Hannes Reinecke, Hannes Reinecke
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
Documentation/blockdev/README.DAC960 | 756 ----
drivers/block/DAC960.c | 7229 ----------------------------------
drivers/block/DAC960.h | 4414 ---------------------
drivers/block/Kconfig | 12 -
drivers/block/Makefile | 1 -
5 files changed, 12412 deletions(-)
delete mode 100644 Documentation/blockdev/README.DAC960
delete mode 100644 drivers/block/DAC960.c
delete mode 100644 drivers/block/DAC960.h
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
deleted file mode 100644
index bd85fb9dc6e5..000000000000
--- a/Documentation/blockdev/README.DAC960
+++ /dev/null
@@ -1,756 +0,0 @@
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Version 2.2.11 for Linux 2.2.19
- Version 2.4.11 for Linux 2.4.12
-
- PRODUCTION RELEASE
-
- 11 October 2001
-
- Leonard N. Zubkoff
- Dandelion Digital
- lnz@dandelion.com
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
- INTRODUCTION
-
-Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
-controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
-California 94555, USA and can be reached at 510.796.6100 or on the World Wide
-Web at http://www.mylex.com. Mylex Technical Support can be reached by
-electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
-510.745.7715. Contact information for offices in Europe and Japan is available
-on their Web site.
-
-The latest information on Linux support for DAC960 PCI RAID Controllers, as
-well as the most recent release of this driver, will always be available from
-my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
-driver supports all current Mylex PCI RAID controllers including the new
-eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
-new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
-and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
-minimum firmware version requirements. For simplicity, in most places this
-documentation refers to DAC960 generically rather than explicitly listing all
-the supported models.
-
-Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
-Please include with the bug report the complete configuration messages reported
-by the driver at startup, along with any subsequent system messages relevant to
-the controller's operation, and a detailed description of your system's
-hardware configuration. Driver bugs are actually quite rare; if you encounter
-problems with disks being marked offline, for example, please contact Mylex
-Technical Support as the problem is related to the hardware configuration
-rather than the Linux driver.
-
-Please consult the RAID controller documentation for detailed information
-regarding installation and configuration of the controllers. This document
-primarily provides information specific to the Linux support.
-
-
- DRIVER FEATURES
-
-The DAC960 RAID controllers are supported solely as high performance RAID
-controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
-driver operates at the block device level, the same level as the SCSI and IDE
-drivers. Unlike other RAID controllers currently supported on Linux, the
-DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
-complexity and unnecessary code that would be associated with an implementation
-as a SCSI driver. The DAC960 driver is designed for as high a performance as
-possible with no compromises or extra code for compatibility with lower
-performance devices. The DAC960 driver includes extensive error logging and
-online configuration management capabilities. Except for initial configuration
-of the controller and adding new disk drives, most everything can be handled
-from Linux while the system is operational.
-
-The DAC960 driver is architected to support up to 8 controllers per system.
-Each DAC960 parallel SCSI controller can support up to 15 disk drives per
-channel, for a maximum of 60 drives on a four channel controller; the fibre
-channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
-a total of 250 drives. The drives installed on a controller are divided into
-one or more "Drive Groups", and then each Drive Group is subdivided further
-into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
-and caching policy associated with it, and it appears to Linux as a single
-block device. Logical Drives are further subdivided into up to 7 partitions
-through the normal Linux and PC disk partitioning schemes. Logical Drives are
-also known as "System Drives", and Drive Groups are also called "Packs". Both
-terms are in use in the Mylex documentation; I have chosen to standardize on
-the more generic "Logical Drive" and "Drive Group".
-
-DAC960 RAID disk devices are named in the style of the obsolete Device File
-System (DEVFS). The device corresponding to Logical Drive D on Controller C
-is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
-through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
-Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
-disks the device names will not change in the event of a disk drive failure.
-The DAC960 driver is assigned major numbers 48 - 55 with one major number per
-controller. The 8 bits of minor number are divided into 5 bits for the Logical
-Drive and 3 bits for the partition.
-
-
- SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
-
-The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
-PCI RAID Controllers as of the date of this document. It is recommended that
-anyone purchasing a Mylex PCI RAID Controller not in the following table
-contact the author beforehand to verify that it is or will be supported.
-
-eXtremeRAID 3000
- 1 Wide Ultra-2/LVD SCSI channel
- 2 External Fibre FC-AL channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-eXtremeRAID 2000
- 4 Wide Ultra-160 LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 352
- 2 Wide Ultra-160 LVD SCSI channels
- 100MHz Intel i960RN RISC Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 170
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RM RISC Processor
- 16MB/32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 160 (AcceleRAID 170LP)
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RS RISC Processor
- Built in 16M ECC SDRAM Memory
- PCI Low Profile Form Factor - fit for 2U height
-
-eXtremeRAID 1100 (DAC1164P)
- 3 Wide Ultra-2/LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
-
-AcceleRAID 250 (DAC960PTL1)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 200 (DAC960PTL0)
- Uses onboard Symbios SCSI chips on certain motherboards
- Includes no onboard SCSI Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 150 (DAC960PRL)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 33MHz Intel i960RP RISC Processor
- 4MB Parity EDO Memory
-
-DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
- 33MHz Intel i960RP RISC Processor
- 4MB/8MB ECC EDO Memory
-
-DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960P 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
-6.00-01 or above is required.
-
-For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
-
-For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
-required.
-
-For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
-
-For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
-3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
-version 2.73-0-00 or above is required (for single Flash ROM controllers)
-
-Please note that not all SCSI disk drives are suitable for use with DAC960
-controllers, and only particular firmware versions of any given model may
-actually function correctly. Similarly, not all motherboards have a BIOS that
-properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
-DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
-If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
-verify compatibility. Mylex makes available a hard disk compatibility list at
-http://www.mylex.com/support/hdcomp/hd-lists.html.
-
-
- DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
-
-To install the DAC960 RAID driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
- cd /usr/src
- tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
- mv README.DAC960 linux/Documentation
- mv DAC960.[ch] linux/drivers/block
- patch -p0 < DAC960.patch (if DAC960.patch is included)
- cd linux
- make config
- make bzImage (or zImage)
-
-Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
-standard kernel, run lilo if appropriate, and reboot.
-
-To create the necessary devices in /dev, the "make_rd" script included in
-"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
-LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
-are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
-statically linked executables of LILO and FDISK. This modified version of LILO
-will allow booting from a DAC960 controller and/or mounting the root file
-system from a DAC960.
-
-Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
-controllers. Installing directly onto a DAC960 may be problematic from other
-Linux distributions until their installation utilities are updated.
-
-
- INSTALLATION NOTES
-
-Before installing Linux or adding DAC960 logical drives to an existing Linux
-system, the controller must first be configured to provide one or more logical
-drives using the BIOS Configuration Utility or DACCF. Please note that since
-there are only at most 6 usable partitions on each logical drive, systems
-requiring more partitions should subdivide a drive group into multiple logical
-drives, each of which can have up to 6 usable partitions. Also, note that with
-large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
-rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
-will cause the logical drive geometry to have more than 65535 cylinders which
-will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
-can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
-during the BIOS initialization sequence.
-
-For maximum performance and the most efficient E2FSCK performance, it is
-recommended that EXT2 file systems be built with a 4KB block size and 16 block
-stride to match the DAC960 controller's 64KB default stripe size. The command
-"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
-large number of small files on the file systems, it is also beneficial to add
-the "-i 16384" option to increase the bytes per inode parameter thereby
-reducing the file system metadata. Finally, on systems that will only be run
-with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
-with the "-s 1" option.
-
-
- DAC960 ANNOUNCEMENTS MAILING LIST
-
-The DAC960 Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
-"dac960-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
-
-
- CONTROLLER CONFIGURATION AND STATUS MONITORING
-
-The DAC960 RAID controllers running firmware 4.06 or above include a Background
-Initialization facility so that system downtime is minimized both for initial
-installation and subsequent configuration of additional storage. The BIOS
-Configuration Utility (accessible via Alt-R during the BIOS initialization
-sequence) is used to quickly configure the controller, and then the logical
-drives that have been created are available for immediate use even while they
-are still being initialized by the controller. The primary need for online
-configuration and status monitoring is then to avoid system downtime when disk
-drives fail and must be replaced. Mylex's online monitoring and configuration
-utilities are being ported to Linux and will become available at some point in
-the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
-enclosure, the controller is able to rebuild failed drives automatically as
-soon as a drive replacement is made available.
-
-The primary interfaces for controller configuration and status monitoring are
-special files created in the /proc/rd/... hierarchy along with the normal
-system console logging mechanism. Whenever the system is operating, the DAC960
-driver queries each controller for status information every 10 seconds, and
-checks for additional conditions every 60 seconds. The initial status of each
-controller is always available for controller N in /proc/rd/cN/initial_status,
-and the current status as of the last status monitoring query is available in
-/proc/rd/cN/current_status. In addition, status changes are also logged by the
-driver to the system console and will appear in the log files maintained by
-syslog. The progress of asynchronous rebuild or consistency check operations
-is also available in /proc/rd/cN/current_status, and progress messages are
-logged to the system console at most every 60 seconds.
-
-Starting with the 2.2.3/2.0.3 versions of the driver, the status information
-available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
-augmented to include the vendor, model, revision, and serial number (if
-available) for each physical device found connected to the controller:
-
-***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PRL PCI RAID Controller
- Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
- PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- SAF-TE Enclosure Management Enabled
- Physical Devices:
- 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68016775HA
- Disk Status: Online, 17928192 blocks
- 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68004E53HA
- Disk Status: Online, 17928192 blocks
- 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13013935HA
- Disk Status: Online, 17928192 blocks
- 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13016897HA
- Disk Status: Online, 17928192 blocks
- 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68019905HA
- Disk Status: Online, 17928192 blocks
- 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68012753HA
- Disk Status: Online, 17928192 blocks
- 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-To simplify the monitoring process for custom software, the special file
-/proc/rd/status returns "OK" when all DAC960 controllers in the system are
-operating normally and no failures have occurred, or "ALERT" if any logical
-drives are offline or critical or any non-standby physical drives are dead.
-
-Configuration commands for controller N are available via the special file
-/proc/rd/cN/user_command. A human readable command can be written to this
-special file to initiate a configuration operation, and the results of the
-operation can then be read back from the special file in addition to being
-logged to the system console. The shell command sequence
-
- echo "<configuration-command>" > /proc/rd/c0/user_command
- cat /proc/rd/c0/user_command
-
-is typically used to execute configuration commands. The configuration
-commands are:
-
- flush-cache
-
- The "flush-cache" command flushes the controller's cache. The system
- automatically flushes the cache at shutdown or if the driver module is
- unloaded, so this command is only needed to be certain a write back cache
- is flushed to disk before the system is powered off by a command to a UPS.
- Note that the flush-cache command also stops an asynchronous rebuild or
- consistency check, so it should not be used except when the system is being
- halted.
-
- kill <channel>:<target-id>
-
- The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
- This command is provided primarily for testing, and should not be used
- during normal system operation.
-
- make-online <channel>:<target-id>
-
- The "make-online" command changes the physical drive <channel>:<target-id>
- from status DEAD to status ONLINE. In cases where multiple physical drives
- have been killed simultaneously, this command may be used to bring all but
- one of them back online, after which a rebuild to the final drive is
- necessary.
-
- Warning: make-online should only be used on a dead physical drive that is
- an active part of a drive group, never on a standby drive. The command
- should never be used on a dead drive that is part of a critical logical
- drive; rebuild should be used if only a single drive is dead.
-
- make-standby <channel>:<target-id>
-
- The "make-standby" command changes physical drive <channel>:<target-id>
- from status DEAD to status STANDBY. It should only be used in cases where
- a dead drive was replaced after an automatic rebuild was performed onto a
- standby drive. It cannot be used to add a standby drive to the controller
- configuration if one was not created initially; the BIOS Configuration
- Utility must be used for that currently.
-
- rebuild <channel>:<target-id>
-
- The "rebuild" command initiates an asynchronous rebuild onto physical drive
- <channel>:<target-id>. It should only be used when a dead drive has been
- replaced.
-
- check-consistency <logical-drive-number>
-
- The "check-consistency" command initiates an asynchronous consistency check
- of <logical-drive-number> with automatic restoration. It can be used
- whenever it is desired to verify the consistency of the redundancy
- information.
-
- cancel-rebuild
- cancel-consistency-check
-
- The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
- rebuild or consistency check operations previously initiated.
-
-
- EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group without a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:1 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages indicating that Logical
-Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:1 is now DEAD
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-The Sense Keys logged here are just Check Condition / Unit Attention conditions
-arising from a SCSI bus reset that is forced by the controller during its error
-recovery procedures. Concurrently with the above, the driver status available
-from /proc/rd also reflects the drive failure. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Dead, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-Since there are no standby drives configured, the system can continue to access
-the logical drives in a performance degraded mode until the failed drive is
-replaced and a rebuild operation completed to restore the redundancy of the
-logical drives. Once Physical Drive 1:1 is replaced with a properly
-functioning drive, or if the physical drive was killed without having failed
-(e.g., due to electrical problems on the SCSI bus), the user can instruct the
-controller to initiate a rebuild operation onto the newly replaced drive:
-
-gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Rebuild of Physical Drive 1:1 Initiated
-
-The echo command instructs the controller to initiate an asynchronous rebuild
-operation onto Physical Drive 1:1, and the status message that results from the
-operation is then available for reading from /proc/rd/c0/user_command, as well
-as being logged to the console by the driver.
-
-Within 10 seconds of this command the driver logs the initiation of the
-asynchronous rebuild operation:
-
-DAC960#0: Rebuild of Physical Drive 1:1 Initiated
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
-
-and every minute a progress message is logged to the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:1 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-
- EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group with a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Standby, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:2 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages:
-
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:2 is now DEAD
-DAC960#0: Physical Drive 1:2 killed because it was removed
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-Since a standby drive is configured, the controller automatically begins
-rebuilding onto the standby drive:
-
-DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-Concurrently with the above, the driver status available from /proc/rd also
-reflects the drive failure and automatic rebuild. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-
-and every minute a progress message is logged on the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:3 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-Note that the absence of a viable standby drive does not create an "ALERT"
-status. Once dead Physical Drive 1:2 has been replaced, the controller must be
-told that this has occurred and that the newly replaced drive should become the
-new standby drive:
-
-gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Make Standby of Physical Drive 1:2 Succeeded
-
-The echo command instructs the controller to make Physical Drive 1:2 into a
-standby drive, and the status message that results from the operation is then
-available for reading from /proc/rd/c0/user_command, as well as being logged to
-the console by the driver. Within 60 seconds of this command the driver logs:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:2 is now STANDBY
-DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Standby, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
deleted file mode 100644
index 581312ac375f..000000000000
--- a/drivers/block/DAC960.c
+++ /dev/null
@@ -1,7229 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
- Portions Copyright 2002 by Mylex (An IBM Business Unit)
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
-*/
-
-
-#define DAC960_DriverVersion "2.5.49"
-#define DAC960_DriverDate "21 Aug 2007"
-
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/blkdev.h>
-#include <linux/bio.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/genhd.h>
-#include <linux/hdreg.h>
-#include <linux/blkpg.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/random.h>
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include "DAC960.h"
-
-#define DAC960_GAM_MINOR 252
-
-
-static DEFINE_MUTEX(DAC960_mutex);
-static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
-static int DAC960_ControllerCount;
-static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
-
-static long disk_size(DAC960_Controller_T *p, int drive_nr)
-{
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (drive_nr >= p->LogicalDriveCount)
- return 0;
- return p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (i == NULL)
- return 0;
- return i->ConfigurableDeviceSize;
- }
-}
-
-static int DAC960_open(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
- int ret = -ENXIO;
-
- mutex_lock(&DAC960_mutex);
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- goto out;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- goto out;
- }
-
- check_disk_change(bdev);
-
- if (!get_capacity(p->disks[drive_nr]))
- goto out;
- ret = 0;
-out:
- mutex_unlock(&DAC960_mutex);
- return ret;
-}
-
-static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (p->FirmwareType == DAC960_V1_Controller) {
- geo->heads = p->V1.GeometryTranslationHeads;
- geo->sectors = p->V1.GeometryTranslationSectors;
- geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize / (geo->heads * geo->sectors);
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- switch (i->DriveGeometry) {
- case DAC960_V2_Geometry_128_32:
- geo->heads = 128;
- geo->sectors = 32;
- break;
- case DAC960_V2_Geometry_255_63:
- geo->heads = 255;
- geo->sectors = 63;
- break;
- default:
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- p, i->DriveGeometry);
- return -EINVAL;
- }
-
- geo->cylinders = i->ConfigurableDeviceSize /
- (geo->heads * geo->sectors);
- }
-
- return 0;
-}
-
-static unsigned int DAC960_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (!p->LogicalDriveInitiallyAccessible[drive_nr])
- return DISK_EVENT_MEDIA_CHANGE;
- return 0;
-}
-
-static int DAC960_revalidate_disk(struct gendisk *disk)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int unit = (long)disk->private_data;
-
- set_capacity(disk, disk_size(p, unit));
- return 0;
-}
-
-static const struct block_device_operations DAC960_BlockDeviceOperations = {
- .owner = THIS_MODULE,
- .open = DAC960_open,
- .getgeo = DAC960_getgeo,
- .check_events = DAC960_check_events,
- .revalidate_disk = DAC960_revalidate_disk,
-};
-
-
-/*
- DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
- Copyright Notice, and Electronic Mail Address.
-*/
-
-static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
-{
- DAC960_Announce("***** DAC960 RAID Driver Version "
- DAC960_DriverVersion " of "
- DAC960_DriverDate " *****\n", Controller);
- DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
- "<lnz@dandelion.com>\n", Controller);
-}
-
-
-/*
- DAC960_Failure prints a standardized error message, and then returns false.
-*/
-
-static bool DAC960_Failure(DAC960_Controller_T *Controller,
- unsigned char *ErrorMessage)
-{
- DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
- Controller);
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
- return false;
-}
-
-/*
- init_dma_loaf() and slice_dma_loaf() are helper functions for
- aggregating the dma-mapped memory for a well-known collection of
- data structures that are of different lengths.
-
- These routines don't guarantee any alignment. The caller must
- include any space needed for alignment in the sizes of the structures
- that are passed in.
- */
-
-static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
- size_t len)
-{
- void *cpu_addr;
- dma_addr_t dma_handle;
-
- cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
- if (cpu_addr == NULL)
- return false;
-
- loaf->cpu_free = loaf->cpu_base = cpu_addr;
- loaf->dma_free =loaf->dma_base = dma_handle;
- loaf->length = len;
- memset(cpu_addr, 0, len);
- return true;
-}
-
-static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
- dma_addr_t *dma_handle)
-{
- void *cpu_end = loaf->cpu_free + len;
- void *cpu_addr = loaf->cpu_free;
-
- BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
- *dma_handle = loaf->dma_free;
- loaf->cpu_free = cpu_end;
- loaf->dma_free += len;
- return cpu_addr;
-}
-
-static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
-{
- if (loaf_handle->cpu_base != NULL)
- pci_free_consistent(dev, loaf_handle->length,
- loaf_handle->cpu_base, loaf_handle->dma_base);
-}
-
-
-/*
- DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
- data structures for Controller. It returns true on success and false on
- failure.
-*/
-
-static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int CommandAllocationLength, CommandAllocationGroupSize;
- int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
- void *AllocationPointer = NULL;
- void *ScatterGatherCPU = NULL;
- dma_addr_t ScatterGatherDMA;
- struct dma_pool *ScatterGatherPool;
- void *RequestSenseCPU = NULL;
- dma_addr_t RequestSenseDMA;
- struct dma_pool *RequestSensePool = NULL;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
- CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V1_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
- sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- Controller->ScatterGatherPool = ScatterGatherPool;
- }
- else
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
- CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V2_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
- sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- RequestSensePool = dma_pool_create("DAC960_V2_RequestSense",
- &Controller->PCIDevice->dev, sizeof(DAC960_SCSI_RequestSense_T),
- sizeof(int), 0);
- if (RequestSensePool == NULL) {
- dma_pool_destroy(ScatterGatherPool);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- }
- Controller->ScatterGatherPool = ScatterGatherPool;
- Controller->V2.RequestSensePool = RequestSensePool;
- }
- Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
- Controller->FreeCommands = NULL;
- for (CommandIdentifier = 1;
- CommandIdentifier <= Controller->DriverQueueDepth;
- CommandIdentifier++)
- {
- DAC960_Command_T *Command;
- if (--CommandsRemaining <= 0)
- {
- CommandsRemaining =
- Controller->DriverQueueDepth - CommandIdentifier + 1;
- if (CommandsRemaining > CommandAllocationGroupSize)
- CommandsRemaining = CommandAllocationGroupSize;
- CommandGroupByteCount =
- CommandsRemaining * CommandAllocationLength;
- AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
- if (AllocationPointer == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- Command = (DAC960_Command_T *) AllocationPointer;
- AllocationPointer += CommandAllocationLength;
- Command->CommandIdentifier = CommandIdentifier;
- Command->Controller = Controller;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
- Controller->Commands[CommandIdentifier-1] = Command;
- ScatterGatherCPU = dma_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
- &ScatterGatherDMA);
- if (ScatterGatherCPU == NULL)
- return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
-
- if (RequestSensePool != NULL) {
- RequestSenseCPU = dma_pool_alloc(RequestSensePool, GFP_ATOMIC,
- &RequestSenseDMA);
- if (RequestSenseCPU == NULL) {
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU,
- ScatterGatherDMA);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- }
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- Command->cmd_sglist = Command->V1.ScatterList;
- Command->V1.ScatterGatherList =
- (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
- } else {
- Command->cmd_sglist = Command->V2.ScatterList;
- Command->V2.ScatterGatherList =
- (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
- Command->V2.RequestSense =
- (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
- Command->V2.RequestSenseDMA = RequestSenseDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
- }
- }
- return true;
-}
-
-
-/*
- DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
- structures for Controller.
-*/
-
-static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int i;
- struct dma_pool *ScatterGatherPool = Controller->ScatterGatherPool;
- struct dma_pool *RequestSensePool = NULL;
- void *ScatterGatherCPU;
- dma_addr_t ScatterGatherDMA;
- void *RequestSenseCPU;
- dma_addr_t RequestSenseDMA;
- DAC960_Command_T *CommandGroup = NULL;
-
-
- if (Controller->FirmwareType == DAC960_V2_Controller)
- RequestSensePool = Controller->V2.RequestSensePool;
-
- Controller->FreeCommands = NULL;
- for (i = 0; i < Controller->DriverQueueDepth; i++)
- {
- DAC960_Command_T *Command = Controller->Commands[i];
-
- if (Command == NULL)
- continue;
-
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
- ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
- RequestSenseCPU = NULL;
- RequestSenseDMA = (dma_addr_t)0;
- } else {
- ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
- ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
- RequestSenseCPU = (void *)Command->V2.RequestSense;
- RequestSenseDMA = Command->V2.RequestSenseDMA;
- }
- if (ScatterGatherCPU != NULL)
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
- if (RequestSenseCPU != NULL)
- dma_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
-
- if ((Command->CommandIdentifier
- % Controller->CommandAllocationGroupSize) == 1) {
- /*
- * We can't free the group of commands until all of the
- * request sense and scatter gather dma structures are free.
- * Remember the beginning of the group, but don't free it
- * until we've reached the beginning of the next group.
- */
- kfree(CommandGroup);
- CommandGroup = Command;
- }
- Controller->Commands[i] = NULL;
- }
- kfree(CommandGroup);
-
- if (Controller->CombinedStatusBuffer != NULL)
- {
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NULL;
- Controller->CurrentStatusBuffer = NULL;
- }
-
- dma_pool_destroy(ScatterGatherPool);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return;
-
- dma_pool_destroy(RequestSensePool);
-
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- kfree(Controller->V2.LogicalDeviceInformation[i]);
- Controller->V2.LogicalDeviceInformation[i] = NULL;
- }
-
- for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
- {
- kfree(Controller->V2.PhysicalDeviceInformation[i]);
- Controller->V2.PhysicalDeviceInformation[i] = NULL;
- kfree(Controller->V2.InquiryUnitSerialNumber[i]);
- Controller->V2.InquiryUnitSerialNumber[i] = NULL;
- }
-}
-
-
-/*
- DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
- Firmware Controllers.
-*/
-
-static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandStatus = 0;
-}
-
-
-/*
- DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
- Firmware Controllers.
-*/
-
-static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- Command->V2.CommandStatus = 0;
-}
-
-
-/*
- DAC960_AllocateCommand allocates a Command structure from Controller's
- free list. During driver initialization, a special initialization command
- has been placed on the free list to guarantee that command allocation can
- never fail.
-*/
-
-static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
- *Controller)
-{
- DAC960_Command_T *Command = Controller->FreeCommands;
- if (Command == NULL) return NULL;
- Controller->FreeCommands = Command->Next;
- Command->Next = NULL;
- return Command;
-}
-
-
-/*
- DAC960_DeallocateCommand deallocates Command, returning it to Controller's
- free list.
-*/
-
-static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
-
- Command->Request = NULL;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
-}
-
-
-/*
- DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
-*/
-
-static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
-{
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
- spin_lock_irq(&Controller->queue_lock);
-}
-
-/*
- DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
-*/
-
-static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
-
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
-
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
-
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
-
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
-
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-/*
- DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
-*/
-
-static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
-*/
-
-static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
-*/
-
-static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
-*/
-
-static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- switch (CommandMailbox->Common.CommandOpcode)
- {
- case DAC960_V1_Enquiry:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
- break;
- case DAC960_V1_GetDeviceState:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
- break;
- case DAC960_V1_Read:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_ExecuteCommand executes Command and waits for completion.
-*/
-
-static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DECLARE_COMPLETION_ONSTACK(Completion);
- unsigned long flags;
- Command->Completion = &Completion;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- if (in_interrupt())
- return;
- wait_for_completion(&Completion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char CommandOpcode2,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
- CommandMailbox->Type3B.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char Channel,
- unsigned char TargetID,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
- Reading IOCTL Command and waits for completion. It returns true on success
- and false on failure.
-
- Return data in The controller's HealthStatusBuffer, which is dma-able memory
-*/
-
-static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
- Information Reading IOCTL Command and waits for completion. It returns
- true on success and false on failure.
-
- Data is returned in the controller's V2.NewControllerInformation dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
- Device Information Reading IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- Data is returned in the controller's V2.NewLogicalDeviceInformation
-*/
-
-static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned short LogicalDeviceNumber)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->LogicalDeviceInfo.CommandOpcode =
- DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
- Physical Device Information" IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- The Channel, TargetID, LogicalUnit arguments should be 0 the first time
- this function is called for a given controller. This will return data
- for the "first" device on that controller. The returned data includes a
- Channel, TargetID, LogicalUnit that can be passed in to this routine to
- get data for the NEXT device on that controller.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-
-*/
-
-static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned char LogicalUnit)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-static void DAC960_V2_ConstructNewUnitSerialNumber(
- DAC960_Controller_T *Controller,
- DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
- int LogicalUnit)
-{
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
- CommandMailbox->SCSI_10.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->SCSI_10.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->SCSI_10.DataTransferSize =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
- CommandMailbox->SCSI_10.CDBLength = 6;
- CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
- CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
- CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
- CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
- CommandMailbox->SCSI_10.SCSI_CDB[4] =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewInquiryUnitSerialNumberDMA;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
-}
-
-
-/*
- DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
- Inquiry command to a SCSI device identified by Channel number,
- Target id, Logical Unit Number. This function Waits for completion
- of the command.
-
- The return data includes Unit Serial Number information for the
- specified device.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
- int Channel, int TargetID, int LogicalUnit)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- Command = DAC960_AllocateCommand(Controller);
- CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Channel, TargetID, LogicalUnit);
-
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
- Operation IOCTL Command and waits for completion. It returns true on
- success and false on failure.
-*/
-
-static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
- DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
- DAC960_V2_OperationDevice_T
- OperationDevice)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->DeviceOperation.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->DeviceOperation.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
- CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V1 Firmware Controllers.
-
- PD and P controller types have no memory mailbox, but still need the
- other dma mapped memory.
-*/
-
-static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_HardwareType_T hw_type = Controller->HardwareType;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- int TimeoutCounter;
- int i;
-
- memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
- CommandMailboxesSize = 0;
- StatusMailboxesSize = 0;
- } else {
- CommandMailboxesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
- }
- DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
- sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
- sizeof(DAC960_V1_RebuildProgress_T) +
- sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
- sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
- sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
- return false;
-
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- goto skip_mailboxes;
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
- Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
- Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
-
-skip_mailboxes:
- Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DCDB_T),
- &Controller->V1.MonitoringDCDB_DMA);
-
- Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_Enquiry_T),
- &Controller->V1.NewEnquiryDMA);
-
- Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_ErrorTable_T),
- &Controller->V1.NewErrorTableDMA);
-
- Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_EventLogEntry_T),
- &Controller->V1.EventLogEntryDMA);
-
- Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_RebuildProgress_T),
- &Controller->V1.RebuildProgressDMA);
-
- Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T),
- &Controller->V1.NewLogicalDriveInformationDMA);
-
- Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T),
- &Controller->V1.BackgroundInitializationStatusDMA);
-
- Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DeviceState_T),
- &Controller->V1.NewDeviceStateDMA);
-
- Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_T),
- &Controller->V1.NewInquiryStandardDataDMA);
-
- Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V1.NewInquiryUnitSerialNumberDMA);
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- return true;
-
- /* Enable the Memory Mailbox Interface. */
- Controller->V1.DualModeMemoryMailboxInterface = true;
- CommandMailbox.TypeX.CommandOpcode = 0x2B;
- CommandMailbox.TypeX.CommandIdentifier = 0;
- CommandMailbox.TypeX.CommandOpcode2 = 0x14;
- CommandMailbox.TypeX.CommandMailboxesBusAddress =
- Controller->V1.FirstCommandMailboxDMA;
- CommandMailbox.TypeX.StatusMailboxesBusAddress =
- Controller->V1.FirstStatusMailboxDMA;
-#define TIMEOUT_COUNT 1000000
-
- for (i = 0; i < 2; i++)
- switch (Controller->HardwareType)
- {
- case DAC960_LA_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_LA_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- case DAC960_PG_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
-
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_PG_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- break;
- }
- return false;
-}
-
-
-/*
- DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V2 Firmware Controllers.
-
- Aggregate the space needed for the controller's memory mailbox and
- the other data structures that will be targets of dma transfers with
- the controller. Allocate a dma-mapped region of memory to hold these
- structures. Then, save CPU pointers and dma_addr_t values to reference
- the structures that are contained in that region.
-*/
-
-static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- dma_addr_t CommandMailboxDMA;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)) &&
- pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- /* This is a temporary dma mapping, used only in the scope of this function */
- CommandMailbox = pci_alloc_consistent(PCI_Device,
- sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
- if (CommandMailbox == NULL)
- return false;
-
- CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
- DmaPagesSize =
- CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V2_HealthStatusBuffer_T) +
- sizeof(DAC960_V2_ControllerInfo_T) +
- sizeof(DAC960_V2_LogicalDeviceInfo_T) +
- sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
- sizeof(DAC960_V2_Event_T) +
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return false;
- }
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
- Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
- Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
-
- Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_HealthStatusBuffer_T),
- &Controller->V2.HealthStatusBufferDMA);
-
- Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_ControllerInfo_T),
- &Controller->V2.NewControllerInformationDMA);
-
- Controller->V2.NewLogicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_LogicalDeviceInfo_T),
- &Controller->V2.NewLogicalDeviceInformationDMA);
-
- Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- &Controller->V2.NewPhysicalDeviceInformationDMA);
-
- Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V2.NewInquiryUnitSerialNumberDMA);
-
- Controller->V2.Event = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_Event_T),
- &Controller->V2.EventDMA);
-
- Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
- &Controller->V2.PhysicalToLogicalDeviceDMA);
-
- /*
- Enable the Memory Mailbox Interface.
-
- I don't know why we can't just use one of the memory mailboxes
- we just allocated to do this, instead of using this temporary one.
- Try this change later.
- */
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
- CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
- (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
- (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
- CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
- Controller->V2.FirstCommandMailboxDMA;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
- Controller->V2.FirstStatusMailboxDMA;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_BA_Controller:
- while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_LP_Controller:
- while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- CommandStatus = DAC960_V2_AbormalCompletion;
- break;
- }
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V1 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V1_Enquiry2_T *Enquiry2;
- dma_addr_t Enquiry2DMA;
- DAC960_V1_Config2_T *Config2;
- dma_addr_t Config2DMA;
- int LogicalDriveNumber, Channel, TargetID;
- struct dma_loaf local_dma;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
-
- Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
- Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
- Controller->V1.NewEnquiryDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY");
- }
- memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "READ CONFIG2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformationDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
-
- for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
- for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
- if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
- Channel, TargetID,
- Controller->V1.NewDeviceStateDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET DEVICE STATE");
- }
- memcpy(&Controller->V1.DeviceState[Channel][TargetID],
- Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
- }
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- switch (Enquiry2->HardwareID.SubModel)
- {
- case DAC960_V1_P_PD_PU:
- if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
- strcpy(Controller->ModelName, "DAC960PU");
- else strcpy(Controller->ModelName, "DAC960PD");
- break;
- case DAC960_V1_PL:
- strcpy(Controller->ModelName, "DAC960PL");
- break;
- case DAC960_V1_PG:
- strcpy(Controller->ModelName, "DAC960PG");
- break;
- case DAC960_V1_PJ:
- strcpy(Controller->ModelName, "DAC960PJ");
- break;
- case DAC960_V1_PR:
- strcpy(Controller->ModelName, "DAC960PR");
- break;
- case DAC960_V1_PT:
- strcpy(Controller->ModelName, "DAC960PT");
- break;
- case DAC960_V1_PTL0:
- strcpy(Controller->ModelName, "DAC960PTL0");
- break;
- case DAC960_V1_PRL:
- strcpy(Controller->ModelName, "DAC960PRL");
- break;
- case DAC960_V1_PTL1:
- strcpy(Controller->ModelName, "DAC960PTL1");
- break;
- case DAC960_V1_1164P:
- strcpy(Controller->ModelName, "DAC1164P");
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "MODEL VERIFICATION");
- }
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field and verify that it
- is a supported firmware version. The supported firmware versions are:
-
- DAC1164P 5.06 and above
- DAC960PTL/PRL/PJ/PG 4.06 and above
- DAC960PU/PD/PL 3.51 and above
- DAC960PU/PD/PL/P 2.73 and above
- */
-#if defined(CONFIG_ALPHA)
- /*
- DEC Alpha machines were often equipped with DAC960 cards that were
- OEMed from Mylex, and had their own custom firmware. Version 2.70,
- the last custom FW revision to be released by DEC for these older
- controllers, appears to work quite well with this driver.
-
- Cards tested successfully were several versions each of the PD and
- PU, called by DEC the KZPSC and KZPAC, respectively, and having
- the Manufacturer Numbers (from Mylex), usually on a sticker on the
- back of the board, of:
-
- KZPSC: D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
- KZPAC: D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
- */
-# define FIRMWARE_27X "2.70"
-#else
-# define FIRMWARE_27X "2.73"
-#endif
-
- if (Enquiry2->FirmwareID.MajorVersion == 0)
- {
- Enquiry2->FirmwareID.MajorVersion =
- Controller->V1.Enquiry.MajorFirmwareVersion;
- Enquiry2->FirmwareID.MinorVersion =
- Controller->V1.Enquiry.MinorFirmwareVersion;
- Enquiry2->FirmwareID.FirmwareType = '0';
- Enquiry2->FirmwareID.TurnID = 0;
- }
- snprintf(Controller->FirmwareVersion, sizeof(Controller->FirmwareVersion),
- "%d.%02d-%c-%02d",
- Enquiry2->FirmwareID.MajorVersion,
- Enquiry2->FirmwareID.MinorVersion,
- Enquiry2->FirmwareID.FirmwareType,
- Enquiry2->FirmwareID.TurnID);
- if (!((Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '3' &&
- strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
- (Controller->FirmwareVersion[0] == '2' &&
- strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
- {
- DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
- DAC960_Error("Firmware Version = '%s'\n", Controller,
- Controller->FirmwareVersion);
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return false;
- }
- /*
- Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
- Enclosure Management Enabled fields.
- */
- Controller->Channels = Enquiry2->ActualChannels;
- Controller->Targets = Enquiry2->MaxTargets;
- Controller->MemorySize = Enquiry2->MemorySize >> 20;
- Controller->V1.SAFTE_EnclosureManagementEnabled =
- (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount =
- Controller->V1.Enquiry.NumberOfLogicalDrives;
- Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
- Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
- /*
- Initialize the Stripe Size, Segment Size, and Geometry Translation.
- */
- Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- switch (Config2->DriveGeometry)
- {
- case DAC960_V1_Geometry_128_32:
- Controller->V1.GeometryTranslationHeads = 128;
- Controller->V1.GeometryTranslationSectors = 32;
- break;
- case DAC960_V1_Geometry_255_63:
- Controller->V1.GeometryTranslationHeads = 255;
- Controller->V1.GeometryTranslationSectors = 63;
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
- }
- /*
- Initialize the Background Initialization Status.
- */
- if ((Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
- (Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.08") >= 0))
- {
- Controller->V1.BackgroundInitializationStatusSupported = true;
- DAC960_V1_ExecuteType3B(Controller,
- DAC960_V1_BackgroundInitializationControl, 0x20,
- Controller->
- V1.BackgroundInitializationStatusDMA);
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- }
- /*
- Initialize the Logical Drive Initially Accessible flag.
- */
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- if (Controller->V1.LogicalDriveInformation
- [LogicalDriveNumber].LogicalDriveState !=
- DAC960_V1_LogicalDrive_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
- Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V2 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned short LogicalDeviceNumber = 0;
- int ModelNameLength;
-
- /* Get data into dma-able area, then copy into permanent location */
- if (!DAC960_V2_NewControllerInfo(Controller))
- return DAC960_Failure(Controller, "GET CONTROLLER INFO");
- memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
- sizeof(DAC960_V2_ControllerInfo_T));
-
-
- if (!DAC960_V2_GeneralInfo(Controller))
- return DAC960_Failure(Controller, "GET HEALTH STATUS");
-
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- ModelNameLength = sizeof(ControllerInfo->ControllerName);
- if (ModelNameLength > sizeof(Controller->ModelName)-1)
- ModelNameLength = sizeof(Controller->ModelName)-1;
- memcpy(Controller->ModelName, ControllerInfo->ControllerName,
- ModelNameLength);
- ModelNameLength--;
- while (Controller->ModelName[ModelNameLength] == ' ' ||
- Controller->ModelName[ModelNameLength] == '\0')
- ModelNameLength--;
- Controller->ModelName[++ModelNameLength] = '\0';
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field.
- */
- sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
- ControllerInfo->FirmwareMajorVersion,
- ControllerInfo->FirmwareMinorVersion,
- ControllerInfo->FirmwareTurnNumber);
- if (ControllerInfo->FirmwareMajorVersion == 6 &&
- ControllerInfo->FirmwareMinorVersion == 0 &&
- ControllerInfo->FirmwareTurnNumber < 1)
- {
- DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
- Controller, Controller->FirmwareVersion);
- DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
- Controller);
- DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
- Controller);
- }
- /*
- Initialize the Controller Channels, Targets, and Memory Size.
- */
- Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
- Controller->Targets =
- ControllerInfo->MaximumTargetsPerChannel
- [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
- Controller->MemorySize = ControllerInfo->MemorySizeMB;
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
- Controller->MaxBlocksPerCommand =
- ControllerInfo->MaximumDataTransferSizeInBlocks;
- Controller->ControllerScatterGatherLimit =
- ControllerInfo->MaximumScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
- /*
- Initialize the Logical Device Information.
- */
- while (true)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
-
- if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
- break;
- LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
- if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
- DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
- Controller, LogicalDeviceNumber);
- break;
- }
- if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
- DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
- Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
- LogicalDeviceNumber++;
- continue;
- }
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- DAC960_V2_LogicalDevice_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- if (LogicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- LogicalDeviceNumber++;
- }
- return true;
-}
-
-
-/*
- DAC960_ReportControllerConfiguration reports the Configuration Information
- for Controller.
-*/
-
-static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
- Controller, Controller->ModelName);
- DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
- Controller, Controller->FirmwareVersion,
- Controller->Channels, Controller->MemorySize);
- DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
- Controller, Controller->Bus,
- Controller->Device, Controller->Function);
- if (Controller->IO_Address == 0)
- DAC960_Info("Unassigned\n", Controller);
- else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
- DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
- Controller, Controller->PCI_Address,
- (unsigned long) Controller->BaseAddress,
- Controller->IRQ_Channel);
- DAC960_Info(" Controller Queue Depth: %d, "
- "Maximum Blocks per Command: %d\n",
- Controller, Controller->ControllerQueueDepth,
- Controller->MaxBlocksPerCommand);
- DAC960_Info(" Driver Queue Depth: %d, "
- "Scatter/Gather Limit: %d of %d Segments\n",
- Controller, Controller->DriverQueueDepth,
- Controller->DriverScatterGatherLimit,
- Controller->ControllerScatterGatherLimit);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, "
- "BIOS Geometry: %d/%d\n", Controller,
- Controller->V1.StripeSize,
- Controller->V1.SegmentSize,
- Controller->V1.GeometryTranslationHeads,
- Controller->V1.GeometryTranslationSectors);
- if (Controller->V1.SAFTE_EnclosureManagementEnabled)
- DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller);
- }
- return true;
-}
-
-
-/*
- DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
- Inquiry Unit Serial Number information for each device connected to
- Controller.
-*/
-
-static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- struct dma_loaf local_dma;
-
- dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
- DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
-
- struct completion Completions[DAC960_V1_MaxChannels];
- unsigned long flags;
- int Channel, TargetID;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
- sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
- return DAC960_Failure(Controller,
- "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
-
- for (Channel = 0; Channel < Controller->Channels; Channel++) {
- DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
- SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_T),
- SCSI_Inquiry_dma + Channel);
- SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- SCSI_NewInquiryUnitSerialNumberDMA + Channel);
- }
-
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- /*
- * For each channel, submit a probe for a device on that channel.
- * The timeout interval for a device that is present is 10 seconds.
- * With this approach, the timeout periods can elapse in parallel
- * on each channel.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- dma_addr_t DCDB_dma = DCDBs_dma[Channel];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- struct completion *Completion = &Completions[Channel];
-
- init_completion(Completion);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- Command->Completion = Completion;
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
- DCDB->Channel = Channel;
- DCDB->TargetID = TargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- /*
- * Wait for the problems submitted in the previous loop
- * to complete. On the probes that are successful,
- * get the serial number of the device that was found.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- SCSI_NewInquiryUnitSerialNumberDMA[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- SCSI_NewInquiryUnitSerialNumberCPU[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- struct completion *Completion = &Completions[Channel];
-
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- continue;
- } else
- memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
-
- /* Preserve Channel and TargetID values from the previous loop */
- Command->Completion = Completion;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- }
- }
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V2 Firmware Controllers by requesting the Physical Device
- Information and SCSI Inquiry Unit Serial Number information for each
- device connected to Controller.
-*/
-
-static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
- unsigned short PhysicalDeviceIndex = 0;
-
- while (true)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
-
- if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
- break;
-
- PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- GFP_ATOMIC);
- if (PhysicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
-
- InquiryUnitSerialNumber = kmalloc(
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL) {
- kfree(PhysicalDeviceInfo);
- return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
- }
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
-
- Channel = NewPhysicalDeviceInfo->Channel;
- TargetID = NewPhysicalDeviceInfo->TargetID;
- LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
-
- /*
- Some devices do NOT have Unit Serial Numbers.
- This command fails for them. But, we still want to
- remember those devices are there. Construct a
- UnitSerialNumber structure for the failure case.
- */
- if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- PhysicalDeviceIndex++;
- LogicalUnit++;
- }
- return true;
-}
-
-
-/*
- DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
- Product Serial Number fields of the Inquiry Standard Data and Inquiry
- Unit Serial Number structures.
-*/
-
-static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
- *InquiryStandardData,
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber,
- unsigned char *Vendor,
- unsigned char *Model,
- unsigned char *Revision,
- unsigned char *SerialNumber)
-{
- int SerialNumberLength, i;
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
- for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
- {
- unsigned char VendorCharacter =
- InquiryStandardData->VendorIdentification[i];
- Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
- ? VendorCharacter : ' ');
- }
- Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
- {
- unsigned char ModelCharacter =
- InquiryStandardData->ProductIdentification[i];
- Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
- ? ModelCharacter : ' ');
- }
- Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
- {
- unsigned char RevisionCharacter =
- InquiryStandardData->ProductRevisionLevel[i];
- Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
- ? RevisionCharacter : ' ');
- }
- Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
- if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
- SerialNumberLength = InquiryUnitSerialNumber->PageLength;
- if (SerialNumberLength >
- sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
- SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
- for (i = 0; i < SerialNumberLength; i++)
- {
- unsigned char SerialNumberCharacter =
- InquiryUnitSerialNumber->ProductSerialNumber[i];
- SerialNumber[i] =
- (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
- ? SerialNumberCharacter : ' ');
- }
- SerialNumber[SerialNumberLength] = '\0';
-}
-
-
-/*
- DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V1 Firmware Controllers.
-*/
-
-static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int LogicalDriveNumber, Channel, TargetID;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *ErrorEntry =
- &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber
- ->ProductSerialNumber)];
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType)
- {
- if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
- DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n",
- Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize,
- Controller->V1.DeviceResetCount[Channel][TargetID]);
- else
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize);
- }
- if (ErrorEntry->ParityErrorCount > 0 ||
- ErrorEntry->SoftErrorCount > 0 ||
- ErrorEntry->HardErrorCount > 0 ||
- ErrorEntry->MiscErrorCount > 0)
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- ErrorEntry->ParityErrorCount,
- ErrorEntry->SoftErrorCount,
- ErrorEntry->HardErrorCount,
- ErrorEntry->MiscErrorCount);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDriveInformation->RAIDLevel,
- (LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "Online"
- : LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "Critical" : "Offline"),
- LogicalDriveInformation->LogicalDriveSize,
- (LogicalDriveInformation->WriteBack
- ? "Write Back" : "Write Thru"));
- }
- return true;
-}
-
-
-/*
- DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V2 Firmware Controllers.
-*/
-
-static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int PhysicalDeviceIndex, LogicalDriveNumber;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (PhysicalDeviceIndex = 0;
- PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
- PhysicalDeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
- DAC960_Info(" %sAsynchronous\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""));
- else
- DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""),
- (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
- * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (PhysicalDeviceInfo->PhysicalDeviceState ==
- DAC960_V2_Device_Unconfigured)
- continue;
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "Online"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "Rebuild"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "Missing"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "Critical"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "Suspected-Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "Commanded-Offline"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "Standby" : "Unknown"),
- PhysicalDeviceInfo->ConfigurableDeviceSize);
- if (PhysicalDeviceInfo->ParityErrors == 0 &&
- PhysicalDeviceInfo->SoftErrors == 0 &&
- PhysicalDeviceInfo->HardErrors == 0 &&
- PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
- PhysicalDeviceInfo->CommandTimeouts == 0 &&
- PhysicalDeviceInfo->Retries == 0 &&
- PhysicalDeviceInfo->Aborts == 0 &&
- PhysicalDeviceInfo->PredictedFailuresDetected == 0)
- continue;
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- PhysicalDeviceInfo->ParityErrors,
- PhysicalDeviceInfo->SoftErrors,
- PhysicalDeviceInfo->HardErrors,
- PhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Info(" Timeouts: %d, Retries: %d, "
- "Aborts: %d, Predicted: %d\n", Controller,
- PhysicalDeviceInfo->CommandTimeouts,
- PhysicalDeviceInfo->Retries,
- PhysicalDeviceInfo->Aborts,
- PhysicalDeviceInfo->PredictedFailuresDetected);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- static const unsigned char *ReadCacheStatus[] = {
- "Read Cache Disabled",
- "Read Cache Enabled",
- "Read Ahead Enabled",
- "Intelligent Read Ahead Enabled",
- "-", "-", "-", "-"
- };
- static const unsigned char *WriteCacheStatus[] = {
- "Write Cache Disabled",
- "Logical Device Read Only",
- "Write Cache Enabled",
- "Intelligent Write Cache Enabled",
- "-", "-", "-", "-"
- };
- unsigned char *GeometryTranslation;
- if (LogicalDeviceInfo == NULL) continue;
- switch (LogicalDeviceInfo->DriveGeometry)
- {
- case DAC960_V2_Geometry_128_32:
- GeometryTranslation = "128/32";
- break;
- case DAC960_V2_Geometry_255_63:
- GeometryTranslation = "255/63";
- break;
- default:
- GeometryTranslation = "Invalid";
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- Controller, LogicalDeviceInfo->DriveGeometry);
- break;
- }
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDeviceInfo->RAIDLevel,
- (LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "Online"
- : LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "Critical" : "Offline"),
- LogicalDeviceInfo->ConfigurableDeviceSize);
- DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n",
- Controller,
- (LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Initialized" : "Uninitialized"),
- GeometryTranslation);
- if (LogicalDeviceInfo->StripeSize == 0)
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: N/A\n", Controller);
- else
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- else
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: N/A\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2));
- else
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2),
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- DAC960_Info(" %s, %s\n", Controller,
- ReadCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
- WriteCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
- if (LogicalDeviceInfo->SoftErrors > 0 ||
- LogicalDeviceInfo->CommandsFailed > 0 ||
- LogicalDeviceInfo->DeferredWriteErrors)
- DAC960_Info(" Errors - Soft: %d, Failed: %d, "
- "Deferred Write: %d\n", Controller,
- LogicalDeviceInfo->SoftErrors,
- LogicalDeviceInfo->CommandsFailed,
- LogicalDeviceInfo->DeferredWriteErrors);
-
- }
- return true;
-}
-
-/*
- DAC960_RegisterBlockDevice registers the Block Device structures
- associated with Controller.
-*/
-
-static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int n;
-
- /*
- Register the Block Device Major Number for this DAC960 Controller.
- */
- if (register_blkdev(MajorNumber, "dac960") < 0)
- return false;
-
- for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
- struct gendisk *disk = Controller->disks[n];
- struct request_queue *RequestQueue;
-
- /* for now, let all request queues share controller's lock */
- RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
- if (!RequestQueue) {
- printk("DAC960: failure to allocate request queue\n");
- continue;
- }
- Controller->RequestQueue[n] = RequestQueue;
- RequestQueue->queuedata = Controller;
- blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
- disk->queue = RequestQueue;
- sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
- disk->major = MajorNumber;
- disk->first_minor = n << DAC960_MaxPartitionsBits;
- disk->fops = &DAC960_BlockDeviceOperations;
- }
- /*
- Indicate the Block Device Registration completed successfully,
- */
- return true;
-}
-
-
-/*
- DAC960_UnregisterBlockDevice unregisters the Block Device structures
- associated with Controller.
-*/
-
-static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int disk;
-
- /* does order matter when deleting gendisk and cleanup in request queue? */
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- del_gendisk(Controller->disks[disk]);
- blk_cleanup_queue(Controller->RequestQueue[disk]);
- Controller->RequestQueue[disk] = NULL;
- }
-
- /*
- Unregister the Block Device Major Number for this DAC960 Controller.
- */
- unregister_blkdev(MajorNumber, "dac960");
-}
-
-/*
- DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
- Information Partition Sector Counts and Block Sizes.
-*/
-
-static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
-{
- int disk;
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
-}
-
-/*
- DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
- the Error Status Register when the driver performs the BIOS handshaking.
- It returns true for fatal errors and false otherwise.
-*/
-
-static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
- unsigned char ErrorStatus,
- unsigned char Parameter0,
- unsigned char Parameter1)
-{
- switch (ErrorStatus)
- {
- case 0x00:
- DAC960_Notice("Physical Device %d:%d Not Responding\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0x08:
- if (Controller->DriveSpinUpMessageDisplayed) break;
- DAC960_Notice("Spinning Up Drives\n", Controller);
- Controller->DriveSpinUpMessageDisplayed = true;
- break;
- case 0x30:
- DAC960_Notice("Configuration Checksum Error\n", Controller);
- break;
- case 0x60:
- DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
- break;
- case 0x70:
- DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
- break;
- case 0x90:
- DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0xA0:
- DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
- break;
- case 0xB0:
- DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
- break;
- case 0xD0:
- DAC960_Notice("New Controller Configuration Found\n", Controller);
- break;
- case 0xF0:
- DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
- return true;
- default:
- DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
- Controller, ErrorStatus);
- return true;
- }
- return false;
-}
-
-
-/*
- * DAC960_DetectCleanup releases the resources that were allocated
- * during DAC960_DetectController(). DAC960_DetectController can
- * has several internal failure points, so not ALL resources may
- * have been allocated. It's important to free only
- * resources that HAVE been allocated. The code below always
- * tests that the resource has been allocated before attempting to
- * free it.
- */
-static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
-{
- int i;
-
- /* Free the memory mailbox, status, and related structures */
- free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
- if (Controller->MemoryMappedAddress) {
- switch(Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PD_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_P_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- }
- iounmap(Controller->MemoryMappedAddress);
- }
- if (Controller->IRQ_Channel)
- free_irq(Controller->IRQ_Channel, Controller);
- if (Controller->IO_Address)
- release_region(Controller->IO_Address, 0x80);
- pci_disable_device(Controller->PCIDevice);
- for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
- put_disk(Controller->disks[i]);
- DAC960_Controllers[Controller->ControllerNumber] = NULL;
- kfree(Controller);
-}
-
-
-/*
- DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
- PCI RAID Controllers by interrogating the PCI Configuration Space for
- Controller Type.
-*/
-
-static DAC960_Controller_T *
-DAC960_DetectController(struct pci_dev *PCI_Device,
- const struct pci_device_id *entry)
-{
- struct DAC960_privdata *privdata =
- (struct DAC960_privdata *)entry->driver_data;
- irq_handler_t InterruptHandler = privdata->InterruptHandler;
- unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
- DAC960_Controller_T *Controller = NULL;
- unsigned char DeviceFunction = PCI_Device->devfn;
- unsigned char ErrorStatus, Parameter0, Parameter1;
- unsigned int IRQ_Channel;
- void __iomem *BaseAddress;
- int i;
-
- Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
- if (Controller == NULL) {
- DAC960_Error("Unable to allocate Controller structure for "
- "Controller at\n", NULL);
- return NULL;
- }
- Controller->ControllerNumber = DAC960_ControllerCount;
- DAC960_Controllers[DAC960_ControllerCount++] = Controller;
- Controller->Bus = PCI_Device->bus->number;
- Controller->FirmwareType = privdata->FirmwareType;
- Controller->HardwareType = privdata->HardwareType;
- Controller->Device = DeviceFunction >> 3;
- Controller->Function = DeviceFunction & 0x7;
- Controller->PCIDevice = PCI_Device;
- strcpy(Controller->FullModelName, "DAC960");
-
- if (pci_enable_device(PCI_Device))
- goto Failure;
-
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_BA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LP_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PG_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PD_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- case DAC960_P_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- }
-
- pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
- if (!Controller->disks[i])
- goto Failure;
- Controller->disks[i]->private_data = (void *)((long)i);
- }
- init_waitqueue_head(&Controller->CommandWaitQueue);
- init_waitqueue_head(&Controller->HealthStatusWaitQueue);
- spin_lock_init(&Controller->queue_lock);
- DAC960_AnnounceDriver(Controller);
- /*
- Map the Controller Register Window.
- */
- if (MemoryWindowSize < PAGE_SIZE)
- MemoryWindowSize = PAGE_SIZE;
- Controller->MemoryMappedAddress =
- ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
- Controller->BaseAddress =
- Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
- if (Controller->MemoryMappedAddress == NULL)
- {
- DAC960_Error("Unable to map Controller Register Window for "
- "Controller at\n", Controller);
- goto Failure;
- }
- BaseAddress = Controller->BaseAddress;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(BaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_GEM_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_GEM_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_GEM_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(BaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_BA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_BA_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_BA_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(BaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LP_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LP_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_LP_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(BaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LA_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(BaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PG_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PG_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PD_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)) {
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_PD_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_P_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)){
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory"
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_P_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- }
- /*
- Acquire shared access to the IRQ Channel.
- */
- IRQ_Channel = PCI_Device->irq;
- if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
- Controller->FullModelName, Controller) < 0)
- {
- DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
- Controller, Controller->IRQ_Channel);
- goto Failure;
- }
- Controller->IRQ_Channel = IRQ_Channel;
- Controller->InitialCommand.CommandIdentifier = 1;
- Controller->InitialCommand.Controller = Controller;
- Controller->Commands[0] = &Controller->InitialCommand;
- Controller->FreeCommands = &Controller->InitialCommand;
- return Controller;
-
-Failure:
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_DetectCleanup(Controller);
- DAC960_ControllerCount--;
- return NULL;
-}
-
-/*
- DAC960_InitializeController initializes Controller.
-*/
-
-static bool
-DAC960_InitializeController(DAC960_Controller_T *Controller)
-{
- if (DAC960_ReadControllerConfiguration(Controller) &&
- DAC960_ReportControllerConfiguration(Controller) &&
- DAC960_CreateAuxiliaryStructures(Controller) &&
- DAC960_ReadDeviceConfiguration(Controller) &&
- DAC960_ReportDeviceConfiguration(Controller) &&
- DAC960_RegisterBlockDevice(Controller))
- {
- /*
- Initialize the Monitoring Timer.
- */
- timer_setup(&Controller->MonitoringTimer,
- DAC960_MonitoringTimerFunction, 0);
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- Controller->ControllerInitialized = true;
- return true;
- }
- return false;
-}
-
-
-/*
- DAC960_FinalizeController finalizes Controller.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerInitialized)
- {
- unsigned long flags;
-
- /*
- * Acquiring and releasing lock here eliminates
- * a very low probability race.
- *
- * The code below allocates controller command structures
- * from the free list without holding the controller lock.
- * This is safe assuming there is no other activity on
- * the controller at the time.
- *
- * But, there might be a monitoring command still
- * in progress. Setting the Shutdown flag while holding
- * the lock ensures that there is no monitoring command
- * in the interrupt handler currently, and any monitoring
- * commands that complete from this time on will NOT return
- * their command structure to the free list.
- */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- Controller->ShutdownMonitoringTimer = 1;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- del_timer_sync(&Controller->MonitoringTimer);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
- DAC960_Notice("done\n", Controller);
-
- if (Controller->HardwareType == DAC960_PD_Controller)
- release_region(Controller->IO_Address, 0x80);
- }
- else
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
- DAC960_V2_RAID_Controller);
- DAC960_Notice("done\n", Controller);
- }
- }
- DAC960_UnregisterBlockDevice(Controller);
- DAC960_DestroyAuxiliaryStructures(Controller);
- DAC960_DestroyProcEntries(Controller);
- DAC960_DetectCleanup(Controller);
-}
-
-
-/*
- DAC960_Probe verifies controller's existence and
- initializes the DAC960 Driver for that controller.
-*/
-
-static int
-DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
-{
- int disk;
- DAC960_Controller_T *Controller;
-
- if (DAC960_ControllerCount == DAC960_MaxControllers)
- {
- DAC960_Error("More than %d DAC960 Controllers detected - "
- "ignoring from Controller at\n",
- NULL, DAC960_MaxControllers);
- return -ENODEV;
- }
-
- Controller = DAC960_DetectController(dev, entry);
- if (!Controller)
- return -ENODEV;
-
- if (!DAC960_InitializeController(Controller)) {
- DAC960_FinalizeController(Controller);
- return -ENODEV;
- }
-
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
- add_disk(Controller->disks[disk]);
- }
- DAC960_CreateProcEntries(Controller);
- return 0;
-}
-
-
-/*
- DAC960_Finalize finalizes the DAC960 Driver.
-*/
-
-static void DAC960_Remove(struct pci_dev *PCI_Device)
-{
- int Controller_Number = (long)pci_get_drvdata(PCI_Device);
- DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
- if (Controller != NULL)
- DAC960_FinalizeController(Controller);
-}
-
-
-/*
- DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
- Command->V1.ScatterGatherList;
- struct scatterlist *ScatterList = Command->V1.ScatterList;
-
- DAC960_V1_ClearCommand(Command);
-
- if (Command->SegmentCount == 1)
- {
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- }
- else
- {
- int i;
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
-
- CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- struct scatterlist *ScatterList = Command->V2.ScatterList;
-
- DAC960_V2_ClearCommand(Command);
-
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
- CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE);
- CommandMailbox->SCSI_10.DataTransferSize =
- Command->BlockCount << DAC960_BlockSizeBits;
- CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
- CommandMailbox->SCSI_10.PhysicalDevice =
- Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
- CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
- CommandMailbox->SCSI_10.CDBLength = 10;
- CommandMailbox->SCSI_10.SCSI_CDB[0] =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
- CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
- CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
- CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
- CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
-
- if (Command->SegmentCount == 1)
- {
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
- }
- else
- {
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- int i;
-
- if (Command->SegmentCount > 2)
- {
- ScatterGatherList = Command->V2.ScatterGatherList;
- CommandMailbox->SCSI_10.CommandControlBits
- .AdditionalScatterGatherListMemory = true;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Address =
- Command->V2.ScatterGatherListDMA;
- }
- else
- ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
-{
- struct request *Request;
- DAC960_Command_T *Command;
-
- while(1) {
- Request = blk_peek_request(req_q);
- if (!Request)
- return 1;
-
- Command = DAC960_AllocateCommand(Controller);
- if (Command == NULL)
- return 0;
-
- if (rq_data_dir(Request) == READ) {
- Command->DmaDirection = PCI_DMA_FROMDEVICE;
- Command->CommandType = DAC960_ReadCommand;
- } else {
- Command->DmaDirection = PCI_DMA_TODEVICE;
- Command->CommandType = DAC960_WriteCommand;
- }
- Command->Completion = Request->end_io_data;
- Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = blk_rq_sectors(Request);
- Command->Request = Request;
- blk_start_request(Request);
- Command->SegmentCount = blk_rq_map_sg(req_q,
- Command->Request, Command->cmd_sglist);
- /* pci_map_sg MAY change the value of SegCount */
- Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- DAC960_QueueReadWriteCommand(Command);
- }
-}
-
-/*
- DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
- I/O Request Queue and queues it to the Controller. WaitForCommand is true if
- this function should wait for a Command to become available if necessary.
- This function returns true if an I/O Request was queued and false otherwise.
-*/
-static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
-{
- int i;
-
- if (!controller->ControllerInitialized)
- return;
-
- /* Do this better later! */
- for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-
- if (controller->req_q_index == 0)
- return;
-
- for (i = 0; i < controller->req_q_index; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-}
-
-
-/*
- DAC960_queue_partial_rw extracts one bio from the request already
- associated with argument command, and construct a new command block to retry I/O
- only on that bio. Queue that command to the controller.
-
- This function re-uses a previously-allocated Command,
- there is no failure mode from trying to allocate a command.
-*/
-
-static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- struct request *Request = Command->Request;
- struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- Command->CommandType = DAC960_ReadRetryCommand;
- else
- Command->CommandType = DAC960_WriteRetryCommand;
-
- /*
- * We could be more efficient with these mapping requests
- * and map only the portions that we need. But since this
- * code should almost never be called, just go with a
- * simple coding.
- */
- (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
-
- (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
- /*
- * Resubmitting the request sector at a time is really tedious.
- * But, this should almost never happen. So, we're willing to pay
- * this price so that in the end, as much of the transfer is completed
- * successfully as possible.
- */
- Command->SegmentCount = 1;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = 1;
- DAC960_QueueReadWriteCommand(Command);
- return;
-}
-
-/*
- DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
-*/
-
-static void DAC960_RequestFunction(struct request_queue *RequestQueue)
-{
- DAC960_ProcessRequest(RequestQueue->queuedata);
-}
-
-/*
- DAC960_ProcessCompletedBuffer performs completion processing for an
- individual Buffer.
-*/
-
-static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
- bool SuccessfulIO)
-{
- struct request *Request = Command->Request;
- blk_status_t Error = SuccessfulIO ? BLK_STS_OK : BLK_STS_IOERR;
-
- pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
- if (Command->Completion) {
- complete(Command->Completion);
- Command->Completion = NULL;
- }
- return true;
- }
- return false;
-}
-
-/*
- DAC960_V1_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_IrrecoverableDataError:
- DAC960_Error("Irrecoverable Data Error on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_LogicalDriveNonexistentOrOffline:
- DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_AccessBeyondEndOfLogicalDrive:
- DAC960_Error("Attempt to Access Beyond End of Logical Drive "
- "on %s:\n", Controller, CommandName);
- break;
- case DAC960_V1_BadDataEncountered:
- DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
- break;
- default:
- DAC960_Error("Unexpected Error Status %04X on %s:\n",
- Controller, Command->V1.CommandStatus, CommandName);
- break;
- }
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V1_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- Command->V1.CommandMailbox.Common.CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V1_IrrecoverableDataError;
-#endif
-
- if (CommandStatus == DAC960_V1_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
- CommandStatus == DAC960_V1_BadDataEncountered)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
-
- if (!DAC960_ProcessCompletedRequest(Command, false))
- BUG();
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V1_NormalCompletion) {
- normal_completion = false;
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V1 error retry failure test\n");
- normal_completion = false;
- DAC960_V1_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
-
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (CommandOpcode == DAC960_V1_Enquiry)
- {
- DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
- unsigned int OldCriticalLogicalDriveCount =
- OldEnquiry->CriticalLogicalDriveCount;
- unsigned int NewCriticalLogicalDriveCount =
- NewEnquiry->CriticalLogicalDriveCount;
- if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
- while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
- while (++LogicalDriveNumber < Controller->LogicalDriveCount)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->StatusFlags.DeferredWriteError !=
- OldEnquiry->StatusFlags.DeferredWriteError)
- DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
- (NewEnquiry->StatusFlags.DeferredWriteError
- ? "TRUE" : "FALSE"));
- if ((NewCriticalLogicalDriveCount > 0 ||
- NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
- (NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount !=
- OldEnquiry->OfflineLogicalDriveCount) ||
- (NewEnquiry->DeadDriveCount > 0 ||
- NewEnquiry->DeadDriveCount !=
- OldEnquiry->DeadDriveCount) ||
- (NewEnquiry->EventLogSequenceNumber !=
- OldEnquiry->EventLogSequenceNumber) ||
- Controller->MonitoringTimerCount == 0 ||
- time_after_eq(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- Controller->V1.NeedLogicalDriveInformation = true;
- Controller->V1.NewEventLogSequenceNumber =
- NewEnquiry->EventLogSequenceNumber;
- Controller->V1.NeedErrorTableInformation = true;
- Controller->V1.NeedDeviceStateInformation = true;
- Controller->V1.StartDeviceStateScan = true;
- Controller->V1.NeedBackgroundInitializationStatus =
- Controller->V1.BackgroundInitializationStatusSupported;
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
- {
- Controller->V1.NeedRebuildProgress = true;
- Controller->V1.RebuildProgressFirst =
- (NewEnquiry->CriticalLogicalDriveCount <
- OldEnquiry->CriticalLogicalDriveCount);
- }
- if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
- switch (NewEnquiry->RebuildFlag)
- {
- case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
- DAC960_Progress("Consistency Check Completed Successfully\n",
- Controller);
- break;
- case DAC960_V1_StandbyRebuildInProgress:
- case DAC960_V1_BackgroundRebuildInProgress:
- break;
- case DAC960_V1_BackgroundCheckInProgress:
- Controller->V1.NeedConsistencyCheckProgress = true;
- break;
- case DAC960_V1_StandbyRebuildCompletedWithError:
- DAC960_Progress("Consistency Check Completed with Error\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Physical Device Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Logical Drive Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
- DAC960_Progress("Consistency Check Failed - Other Causes\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
- DAC960_Progress("Consistency Check Successfully Terminated\n",
- Controller);
- break;
- }
- else if (NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundCheckInProgress)
- Controller->V1.NeedConsistencyCheckProgress = true;
- Controller->MonitoringAlertMode =
- (NewEnquiry->CriticalLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->DeadDriveCount > 0);
- if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
- {
- Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
- Controller->V1.RebuildFlagPending = true;
- }
- memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
- }
- else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
- {
- static char
- *DAC960_EventMessages[] =
- { "killed because write recovery failed",
- "killed because of SCSI bus reset failure",
- "killed because of double check condition",
- "killed because it was removed",
- "killed because of gross error on SCSI chip",
- "killed because of bad tag returned from drive",
- "killed because of timeout on SCSI command",
- "killed because of reset SCSI command issued from system",
- "killed because busy or parity error count exceeded limit",
- "killed because of 'kill drive' command from system",
- "killed because of selection timeout",
- "killed due to SCSI phase sequence error",
- "killed due to unknown status" };
- DAC960_V1_EventLogEntry_T *EventLogEntry =
- Controller->V1.EventLogEntry;
- if (EventLogEntry->SequenceNumber ==
- Controller->V1.OldEventLogSequenceNumber)
- {
- unsigned char SenseKey = EventLogEntry->SenseKey;
- unsigned char AdditionalSenseCode =
- EventLogEntry->AdditionalSenseCode;
- unsigned char AdditionalSenseCodeQualifier =
- EventLogEntry->AdditionalSenseCodeQualifier;
- if (SenseKey == DAC960_SenseKey_VendorSpecific &&
- AdditionalSenseCode == 0x80 &&
- AdditionalSenseCodeQualifier <
- ARRAY_SIZE(DAC960_EventMessages))
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- DAC960_EventMessages[
- AdditionalSenseCodeQualifier]);
- else if (SenseKey == DAC960_SenseKey_UnitAttention &&
- AdditionalSenseCode == 0x29)
- {
- if (Controller->MonitoringTimerCount > 0)
- Controller->V1.DeviceResetCount[EventLogEntry->Channel]
- [EventLogEntry->TargetID]++;
- }
- else if (!(SenseKey == DAC960_SenseKey_NoSense ||
- (SenseKey == DAC960_SenseKey_NotReady &&
- AdditionalSenseCode == 0x04 &&
- (AdditionalSenseCodeQualifier == 0x01 ||
- AdditionalSenseCodeQualifier == 0x02))))
- {
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- SenseKey,
- AdditionalSenseCode,
- AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- EventLogEntry->Information[0],
- EventLogEntry->Information[1],
- EventLogEntry->Information[2],
- EventLogEntry->Information[3],
- EventLogEntry->CommandSpecificInformation[0],
- EventLogEntry->CommandSpecificInformation[1],
- EventLogEntry->CommandSpecificInformation[2],
- EventLogEntry->CommandSpecificInformation[3]);
- }
- }
- Controller->V1.OldEventLogSequenceNumber++;
- }
- else if (CommandOpcode == DAC960_V1_GetErrorTable)
- {
- DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
- int Channel, TargetID;
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
- &NewErrorTable->ErrorTableEntries[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
- &OldErrorTable->ErrorTableEntries[Channel][TargetID];
- if ((NewErrorEntry->ParityErrorCount !=
- OldErrorEntry->ParityErrorCount) ||
- (NewErrorEntry->SoftErrorCount !=
- OldErrorEntry->SoftErrorCount) ||
- (NewErrorEntry->HardErrorCount !=
- OldErrorEntry->HardErrorCount) ||
- (NewErrorEntry->MiscErrorCount !=
- OldErrorEntry->MiscErrorCount))
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller, Channel, TargetID,
- NewErrorEntry->ParityErrorCount,
- NewErrorEntry->SoftErrorCount,
- NewErrorEntry->HardErrorCount,
- NewErrorEntry->MiscErrorCount);
- }
- memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
- sizeof(DAC960_V1_ErrorTable_T));
- }
- else if (CommandOpcode == DAC960_V1_GetDeviceState)
- {
- DAC960_V1_DeviceState_T *OldDeviceState =
- &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- DAC960_V1_DeviceState_T *NewDeviceState =
- Controller->V1.NewDeviceState;
- if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
- DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
- Controller->V1.DeviceStateChannel,
- Controller->V1.DeviceStateTargetID,
- (NewDeviceState->DeviceState
- == DAC960_V1_Device_Dead
- ? "DEAD"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "WRITE-ONLY"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "ONLINE" : "STANDBY"));
- if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
- NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
- {
- Controller->V1.NeedDeviceInquiryInformation = true;
- Controller->V1.NeedDeviceSerialNumberInformation = true;
- Controller->V1.DeviceResetCount
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID] = 0;
- }
- memcpy(OldDeviceState, NewDeviceState,
- sizeof(DAC960_V1_DeviceState_T));
- }
- else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
- &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
- if (NewLogicalDriveInformation->LogicalDriveState !=
- OldLogicalDriveInformation->LogicalDriveState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "ONLINE"
- : NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "CRITICAL" : "OFFLINE"));
- if (NewLogicalDriveInformation->WriteBack !=
- OldLogicalDriveInformation->WriteBack)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->WriteBack
- ? "WRITE BACK" : "WRITE THRU"));
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
- }
- else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
- Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
- CommandStatus = DAC960_V1_RebuildSuccessful;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Rebuild in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_RebuildFailed_LogicalDriveFailure:
- DAC960_Progress("Rebuild Failed due to "
- "Logical Drive Failure\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_BadBlocksOnOther:
- DAC960_Progress("Rebuild Failed due to "
- "Bad Blocks on Other Drives\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_NewDriveFailed:
- DAC960_Progress("Rebuild Failed due to "
- "Failure of Drive Being Rebuilt\n", Controller);
- break;
- case DAC960_V1_NoRebuildOrCheckInProgress:
- break;
- case DAC960_V1_RebuildSuccessful:
- DAC960_Progress("Rebuild Completed Successfully\n", Controller);
- break;
- case DAC960_V1_RebuildSuccessfullyTerminated:
- DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
- break;
- }
- Controller->V1.LastRebuildStatus = CommandStatus;
- if (CommandType != DAC960_MonitoringCommand &&
- Controller->V1.RebuildStatusPending)
- {
- Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
- Controller->V1.RebuildStatusPending = false;
- }
- else if (CommandType == DAC960_MonitoringCommand &&
- CommandStatus != DAC960_V1_NormalCompletion &&
- CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
- {
- Controller->V1.PendingRebuildStatus = CommandStatus;
- Controller->V1.RebuildStatusPending = true;
- }
- }
- else if (CommandOpcode == DAC960_V1_RebuildStat)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NormalCompletion)
- {
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Consistency Check in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- }
- }
- else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
- unsigned int BlocksCompleted =
- Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- switch (Controller->V1.BackgroundInitializationStatus->Status)
- {
- case DAC960_V1_BackgroundInitializationInvalid:
- break;
- case DAC960_V1_BackgroundInitializationStarted:
- DAC960_Progress("Background Initialization Started\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationInProgress:
- if (BlocksCompleted ==
- Controller->V1.LastBackgroundInitializationStatus.
- BlocksCompleted &&
- LogicalDriveNumber ==
- Controller->V1.LastBackgroundInitializationStatus.
- LogicalDriveNumber)
- break;
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Background Initialization in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_BackgroundInitializationSuspended:
- DAC960_Progress("Background Initialization Suspended\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationCancelled:
- DAC960_Progress("Background Initialization Cancelled\n",
- Controller);
- break;
- }
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- break;
- case DAC960_V1_BackgroundInitSuccessful:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization "
- "Completed Successfully\n", Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_BackgroundInitAborted:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization Aborted\n",
- Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_NoBackgroundInitInProgress:
- break;
- }
- }
- else if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- This is a bit ugly.
-
- The InquiryStandardData and
- the InquiryUntitSerialNumber information
- retrieval operations BOTH use the DAC960_V1_DCDB
- commands. the test above can't distinguish between
- these two cases.
-
- Instead, we rely on the order of code later in this
- function to ensure that DeviceInquiryInformation commands
- are submitted before DeviceSerialNumber commands.
- */
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryStandardData, 0,
- sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryStandardData,
- Controller->V1.NewInquiryStandardData,
- sizeof(DAC960_SCSI_Inquiry_T));
- Controller->V1.NeedDeviceInquiryInformation = false;
- }
- else if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryUnitSerialNumber,
- Controller->V1.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- Controller->V1.NeedDeviceSerialNumberInformation = false;
- }
- }
- /*
- Begin submitting new monitoring commands.
- */
- if (Controller->V1.NewEventLogSequenceNumber
- - Controller->V1.OldEventLogSequenceNumber > 0)
- {
- Command->V1.CommandMailbox.Type3E.CommandOpcode =
- DAC960_V1_PerformEventLogOperation;
- Command->V1.CommandMailbox.Type3E.OperationType =
- DAC960_V1_GetEventLogEntry;
- Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
- Command->V1.CommandMailbox.Type3E.SequenceNumber =
- Controller->V1.OldEventLogSequenceNumber;
- Command->V1.CommandMailbox.Type3E.BusAddress =
- Controller->V1.EventLogEntryDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedErrorTableInformation)
- {
- Controller->V1.NeedErrorTableInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetErrorTable;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewErrorTableDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress &&
- Controller->V1.RebuildProgressFirst)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceStateInformation)
- {
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
-
- dma_addr_t NewInquiryStandardDataDMA =
- Controller->V1.NewInquiryStandardDataDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- Controller->V1.NewInquiryUnitSerialNumberDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.StartDeviceStateScan)
- {
- Controller->V1.DeviceStateChannel = 0;
- Controller->V1.DeviceStateTargetID = 0;
- Controller->V1.StartDeviceStateScan = false;
- }
- else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
- {
- Controller->V1.DeviceStateChannel++;
- Controller->V1.DeviceStateTargetID = 0;
- }
- if (Controller->V1.DeviceStateChannel < Controller->Channels)
- {
- Controller->V1.NewDeviceState->DeviceState =
- DAC960_V1_Device_Dead;
- Command->V1.CommandMailbox.Type3D.CommandOpcode =
- DAC960_V1_GetDeviceState;
- Command->V1.CommandMailbox.Type3D.Channel =
- Controller->V1.DeviceStateChannel;
- Command->V1.CommandMailbox.Type3D.TargetID =
- Controller->V1.DeviceStateTargetID;
- Command->V1.CommandMailbox.Type3D.BusAddress =
- Controller->V1.NewDeviceStateDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->V1.NeedDeviceStateInformation = false;
- }
- if (Controller->V1.NeedLogicalDriveInformation)
- {
- Controller->V1.NeedLogicalDriveInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetLogicalDriveInformation;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewLogicalDriveInformationDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedConsistencyCheckProgress)
- {
- Controller->V1.NeedConsistencyCheckProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_RebuildStat;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedBackgroundInitializationStatus)
- {
- Controller->V1.NeedBackgroundInitializationStatus = false;
- Command->V1.CommandMailbox.Type3B.CommandOpcode =
- DAC960_V1_BackgroundInitializationControl;
- Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
- Command->V1.CommandMailbox.Type3B.BusAddress =
- Controller->V1.BackgroundInitializationStatusDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
- KernelCommand->CommandStatus = Command->V1.CommandStatus;
- Command->V1.KernelCommand = NULL;
- if (CommandOpcode == DAC960_V1_DCDB)
- Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
- [KernelCommand->DCDB->TargetID] =
- false;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V1_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-
-/*
- DAC960_V2_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- static const unsigned char *SenseErrors[] = {
- "NO SENSE", "RECOVERED ERROR",
- "NOT READY", "MEDIUM ERROR",
- "HARDWARE ERROR", "ILLEGAL REQUEST",
- "UNIT ATTENTION", "DATA PROTECT",
- "BLANK CHECK", "VENDOR-SPECIFIC",
- "COPY ABORTED", "ABORTED COMMAND",
- "EQUAL", "VOLUME OVERFLOW",
- "MISCOMPARE", "RESERVED"
- };
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- DAC960_Error("Error Condition %s on %s:\n", Controller,
- SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
- occurs.
-*/
-
-static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
- DAC960_V2_Event_T *Event)
-{
- DAC960_SCSI_RequestSense_T *RequestSense =
- (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
- unsigned char MessageBuffer[DAC960_LineBufferSize];
- static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
- { /* Physical Device Events (0x0000 - 0x007F) */
- { 0x0001, "P Online" },
- { 0x0002, "P Standby" },
- { 0x0005, "P Automatic Rebuild Started" },
- { 0x0006, "P Manual Rebuild Started" },
- { 0x0007, "P Rebuild Completed" },
- { 0x0008, "P Rebuild Cancelled" },
- { 0x0009, "P Rebuild Failed for Unknown Reasons" },
- { 0x000A, "P Rebuild Failed due to New Physical Device" },
- { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
- { 0x000C, "S Offline" },
- { 0x000D, "P Found" },
- { 0x000E, "P Removed" },
- { 0x000F, "P Unconfigured" },
- { 0x0010, "P Expand Capacity Started" },
- { 0x0011, "P Expand Capacity Completed" },
- { 0x0012, "P Expand Capacity Failed" },
- { 0x0013, "P Command Timed Out" },
- { 0x0014, "P Command Aborted" },
- { 0x0015, "P Command Retried" },
- { 0x0016, "P Parity Error" },
- { 0x0017, "P Soft Error" },
- { 0x0018, "P Miscellaneous Error" },
- { 0x0019, "P Reset" },
- { 0x001A, "P Active Spare Found" },
- { 0x001B, "P Warm Spare Found" },
- { 0x001C, "S Sense Data Received" },
- { 0x001D, "P Initialization Started" },
- { 0x001E, "P Initialization Completed" },
- { 0x001F, "P Initialization Failed" },
- { 0x0020, "P Initialization Cancelled" },
- { 0x0021, "P Failed because Write Recovery Failed" },
- { 0x0022, "P Failed because SCSI Bus Reset Failed" },
- { 0x0023, "P Failed because of Double Check Condition" },
- { 0x0024, "P Failed because Device Cannot Be Accessed" },
- { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
- { 0x0026, "P Failed because of Bad Tag from Device" },
- { 0x0027, "P Failed because of Command Timeout" },
- { 0x0028, "P Failed because of System Reset" },
- { 0x0029, "P Failed because of Busy Status or Parity Error" },
- { 0x002A, "P Failed because Host Set Device to Failed State" },
- { 0x002B, "P Failed because of Selection Timeout" },
- { 0x002C, "P Failed because of SCSI Bus Phase Error" },
- { 0x002D, "P Failed because Device Returned Unknown Status" },
- { 0x002E, "P Failed because Device Not Ready" },
- { 0x002F, "P Failed because Device Not Found at Startup" },
- { 0x0030, "P Failed because COD Write Operation Failed" },
- { 0x0031, "P Failed because BDT Write Operation Failed" },
- { 0x0039, "P Missing at Startup" },
- { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
- { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
- { 0x003D, "P Standby Rebuild Started" },
- /* Logical Device Events (0x0080 - 0x00FF) */
- { 0x0080, "M Consistency Check Started" },
- { 0x0081, "M Consistency Check Completed" },
- { 0x0082, "M Consistency Check Cancelled" },
- { 0x0083, "M Consistency Check Completed With Errors" },
- { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
- { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
- { 0x0086, "L Offline" },
- { 0x0087, "L Critical" },
- { 0x0088, "L Online" },
- { 0x0089, "M Automatic Rebuild Started" },
- { 0x008A, "M Manual Rebuild Started" },
- { 0x008B, "M Rebuild Completed" },
- { 0x008C, "M Rebuild Cancelled" },
- { 0x008D, "M Rebuild Failed for Unknown Reasons" },
- { 0x008E, "M Rebuild Failed due to New Physical Device" },
- { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
- { 0x0090, "M Initialization Started" },
- { 0x0091, "M Initialization Completed" },
- { 0x0092, "M Initialization Cancelled" },
- { 0x0093, "M Initialization Failed" },
- { 0x0094, "L Found" },
- { 0x0095, "L Deleted" },
- { 0x0096, "M Expand Capacity Started" },
- { 0x0097, "M Expand Capacity Completed" },
- { 0x0098, "M Expand Capacity Failed" },
- { 0x0099, "L Bad Block Found" },
- { 0x009A, "L Size Changed" },
- { 0x009B, "L Type Changed" },
- { 0x009C, "L Bad Data Block Found" },
- { 0x009E, "L Read of Data Block in BDT" },
- { 0x009F, "L Write Back Data for Disk Block Lost" },
- { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
- { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
- { 0x00A2, "L Standby Rebuild Started" },
- /* Fault Management Events (0x0100 - 0x017F) */
- { 0x0140, "E Fan %d Failed" },
- { 0x0141, "E Fan %d OK" },
- { 0x0142, "E Fan %d Not Present" },
- { 0x0143, "E Power Supply %d Failed" },
- { 0x0144, "E Power Supply %d OK" },
- { 0x0145, "E Power Supply %d Not Present" },
- { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
- { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
- { 0x0148, "E Temperature Sensor %d Temperature Normal" },
- { 0x0149, "E Temperature Sensor %d Not Present" },
- { 0x014A, "E Enclosure Management Unit %d Access Critical" },
- { 0x014B, "E Enclosure Management Unit %d Access OK" },
- { 0x014C, "E Enclosure Management Unit %d Access Offline" },
- /* Controller Events (0x0180 - 0x01FF) */
- { 0x0181, "C Cache Write Back Error" },
- { 0x0188, "C Battery Backup Unit Found" },
- { 0x0189, "C Battery Backup Unit Charge Level Low" },
- { 0x018A, "C Battery Backup Unit Charge Level OK" },
- { 0x0193, "C Installation Aborted" },
- { 0x0195, "C Battery Backup Unit Physically Removed" },
- { 0x0196, "C Memory Error During Warm Boot" },
- { 0x019E, "C Memory Soft ECC Error Corrected" },
- { 0x019F, "C Memory Hard ECC Error Corrected" },
- { 0x01A2, "C Battery Backup Unit Failed" },
- { 0x01AB, "C Mirror Race Recovery Failed" },
- { 0x01AC, "C Mirror Race on Critical Drive" },
- /* Controller Internal Processor Events */
- { 0x0380, "C Internal Controller Hung" },
- { 0x0381, "C Internal Controller Firmware Breakpoint" },
- { 0x0390, "C Internal Controller i960 Processor Specific Error" },
- { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
- { 0, "" } };
- int EventListIndex = 0, EventCode;
- unsigned char EventType, *EventMessage;
- if (Event->EventCode == 0x1C &&
- RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
- (RequestSense->AdditionalSenseCode == 0x80 ||
- RequestSense->AdditionalSenseCode == 0x81))
- Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
- RequestSense->AdditionalSenseCodeQualifier;
- while (true)
- {
- EventCode = EventList[EventListIndex].EventCode;
- if (EventCode == Event->EventCode || EventCode == 0) break;
- EventListIndex++;
- }
- EventType = EventList[EventListIndex].EventMessage[0];
- EventMessage = &EventList[EventListIndex].EventMessage[2];
- if (EventCode == 0)
- {
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- return;
- }
- switch (EventType)
- {
- case 'P':
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- break;
- case 'L':
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'M':
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'S':
- if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
- (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
- RequestSense->AdditionalSenseCode == 0x04 &&
- (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
- RequestSense->AdditionalSenseCodeQualifier == 0x02)))
- break;
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->SenseKey,
- RequestSense->AdditionalSenseCode,
- RequestSense->AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->Information[0],
- RequestSense->Information[1],
- RequestSense->Information[2],
- RequestSense->Information[3],
- RequestSense->CommandSpecificInformation[0],
- RequestSense->CommandSpecificInformation[1],
- RequestSense->CommandSpecificInformation[2],
- RequestSense->CommandSpecificInformation[3]);
- break;
- case 'E':
- if (Controller->SuppressEnclosureMessages) break;
- sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
- DAC960_Critical("Enclosure %d %s\n", Controller,
- Event->TargetID, MessageBuffer);
- break;
- case 'C':
- DAC960_Critical("Controller %s\n", Controller, EventMessage);
- break;
- default:
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- break;
- }
-}
-
-
-/*
- DAC960_V2_ReportProgress prints an appropriate progress message for
- Logical Device Long Operations.
-*/
-
-static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
- unsigned char *MessageString,
- unsigned int LogicalDeviceNumber,
- unsigned long BlocksCompleted,
- unsigned long LogicalDeviceSize)
-{
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n", Controller,
- MessageString,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
- Controller->EphemeralProgressMessage = false;
-}
-
-
-/*
- DAC960_V2_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode;
- DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode;
- DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V2_AbormalCompletion;
-#endif
- Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
-
- if (CommandStatus == DAC960_V2_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- /*
- Perform completion processing for all buffers in this I/O Request.
- */
- (void)DAC960_ProcessCompletedRequest(Command, false);
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- normal_completion = false;
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V2 error retry failure test\n");
- normal_completion = false;
- DAC960_V2_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (IOCTLOpcode == DAC960_V2_GetControllerInfo)
- {
- DAC960_V2_ControllerInfo_T *NewControllerInfo =
- Controller->V2.NewControllerInformation;
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- Controller->LogicalDriveCount =
- NewControllerInfo->LogicalDevicesPresent;
- Controller->V2.NeedLogicalDeviceInformation = true;
- Controller->V2.NeedPhysicalDeviceInformation = true;
- Controller->V2.StartLogicalDeviceInformationScan = true;
- Controller->V2.StartPhysicalDeviceInformationScan = true;
- Controller->MonitoringAlertMode =
- (NewControllerInfo->LogicalDevicesCritical > 0 ||
- NewControllerInfo->LogicalDevicesOffline > 0 ||
- NewControllerInfo->PhysicalDisksCritical > 0 ||
- NewControllerInfo->PhysicalDisksOffline > 0);
- memcpy(ControllerInfo, NewControllerInfo,
- sizeof(DAC960_V2_ControllerInfo_T));
- }
- else if (IOCTLOpcode == DAC960_V2_GetEvent)
- {
- if (CommandStatus == DAC960_V2_NormalCompletion) {
- DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
- }
- Controller->V2.NextEventSequenceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- unsigned int DeviceIndex;
- while (PhysicalDeviceInfo != NULL &&
- (NewPhysicalDeviceInfo->Channel >
- PhysicalDeviceInfo->Channel ||
- (NewPhysicalDeviceInfo->Channel ==
- PhysicalDeviceInfo->Channel &&
- (NewPhysicalDeviceInfo->TargetID >
- PhysicalDeviceInfo->TargetID ||
- (NewPhysicalDeviceInfo->TargetID ==
- PhysicalDeviceInfo->TargetID &&
- NewPhysicalDeviceInfo->LogicalUnit >
- PhysicalDeviceInfo->LogicalUnit)))))
- {
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- for (DeviceIndex = PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex++)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
- }
- Controller->V2.PhysicalDeviceInformation
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- }
- if (PhysicalDeviceInfo == NULL ||
- (NewPhysicalDeviceInfo->Channel !=
- PhysicalDeviceInfo->Channel) ||
- (NewPhysicalDeviceInfo->TargetID !=
- PhysicalDeviceInfo->TargetID) ||
- (NewPhysicalDeviceInfo->LogicalUnit !=
- PhysicalDeviceInfo->LogicalUnit))
- {
- PhysicalDeviceInfo =
- kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
- InquiryUnitSerialNumber =
- kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL ||
- PhysicalDeviceInfo == NULL)
- {
- kfree(InquiryUnitSerialNumber);
- InquiryUnitSerialNumber = NULL;
- kfree(PhysicalDeviceInfo);
- PhysicalDeviceInfo = NULL;
- }
- DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (PhysicalDeviceInfo != NULL)
- {
- memset(PhysicalDeviceInfo, 0,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- PhysicalDeviceInfo->PhysicalDeviceState =
- DAC960_V2_Device_InvalidState;
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex > PhysicalDeviceIndex;
- DeviceIndex--)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
- }
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- }
- }
- if (PhysicalDeviceInfo != NULL)
- {
- if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
- PhysicalDeviceInfo->PhysicalDeviceState)
- DAC960_Critical(
- "Physical Device %d:%d is now %s\n", Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "ONLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "REBUILD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "MISSING"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "CRITICAL"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "SUSPECTED-DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "COMMANDED-OFFLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "STANDBY" : "UNKNOWN"));
- if ((NewPhysicalDeviceInfo->ParityErrors !=
- PhysicalDeviceInfo->ParityErrors) ||
- (NewPhysicalDeviceInfo->SoftErrors !=
- PhysicalDeviceInfo->SoftErrors) ||
- (NewPhysicalDeviceInfo->HardErrors !=
- PhysicalDeviceInfo->HardErrors) ||
- (NewPhysicalDeviceInfo->MiscellaneousErrors !=
- PhysicalDeviceInfo->MiscellaneousErrors) ||
- (NewPhysicalDeviceInfo->CommandTimeouts !=
- PhysicalDeviceInfo->CommandTimeouts) ||
- (NewPhysicalDeviceInfo->Retries !=
- PhysicalDeviceInfo->Retries) ||
- (NewPhysicalDeviceInfo->Aborts !=
- PhysicalDeviceInfo->Aborts) ||
- (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
- PhysicalDeviceInfo->PredictedFailuresDetected))
- {
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->ParityErrors,
- NewPhysicalDeviceInfo->SoftErrors,
- NewPhysicalDeviceInfo->HardErrors,
- NewPhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Timeouts = %d, Retries = %d, "
- "Aborts = %d, Predicted = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->CommandTimeouts,
- NewPhysicalDeviceInfo->Retries,
- NewPhysicalDeviceInfo->Aborts,
- NewPhysicalDeviceInfo
- ->PredictedFailuresDetected);
- }
- if ((PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead ||
- PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_InvalidState) &&
- NewPhysicalDeviceInfo->PhysicalDeviceState
- != DAC960_V2_Device_Dead)
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- }
- NewPhysicalDeviceInfo->LogicalUnit++;
- Controller->V2.PhysicalDeviceIndex++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
- {
- unsigned int DeviceIndex;
- for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices;
- DeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- }
- Controller->V2.NeedPhysicalDeviceInformation = false;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- unsigned short LogicalDeviceNumber =
- NewLogicalDeviceInfo->LogicalDeviceNumber;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
- if (LogicalDeviceInfo == NULL)
- {
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists%s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (LogicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (LogicalDeviceInfo != NULL)
- {
- memset(LogicalDeviceInfo, 0,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- }
- if (LogicalDeviceInfo != NULL)
- {
- unsigned long LogicalDeviceSize =
- NewLogicalDeviceInfo->ConfigurableDeviceSize;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- LogicalDeviceInfo->LogicalDeviceState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "ONLINE"
- : NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "CRITICAL" : "OFFLINE"));
- if ((NewLogicalDeviceInfo->SoftErrors !=
- LogicalDeviceInfo->SoftErrors) ||
- (NewLogicalDeviceInfo->CommandsFailed !=
- LogicalDeviceInfo->CommandsFailed) ||
- (NewLogicalDeviceInfo->DeferredWriteErrors !=
- LogicalDeviceInfo->DeferredWriteErrors))
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
- "Soft = %d, Failed = %d, Deferred Write = %d\n",
- Controller, LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- NewLogicalDeviceInfo->SoftErrors,
- NewLogicalDeviceInfo->CommandsFailed,
- NewLogicalDeviceInfo->DeferredWriteErrors);
- if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Consistency Check",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ConsistencyCheckBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->RebuildInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Rebuild",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->RebuildBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Background Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->BackgroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Foreground Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ForegroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->DataMigrationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Data Migration",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->DataMigrationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Patrol Operation",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->PatrolOperationBlockNumber,
- LogicalDeviceSize);
- if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
- !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
- "Background Initialization %s\n",
- Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Completed" : "Failed"));
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- }
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDeviceNumber] = true;
- NewLogicalDeviceInfo->LogicalDeviceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL ||
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber])
- continue;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->V2.LogicalDeviceInformation
- [LogicalDriveNumber] = NULL;
- kfree(LogicalDeviceInfo);
- Controller->LogicalDriveInitiallyAccessible
- [LogicalDriveNumber] = false;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- Controller->V2.NeedLogicalDeviceInformation = false;
- }
- else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
-
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- memset(InquiryUnitSerialNumber,
- 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber,
- Controller->V2.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- Controller->V2.NeedDeviceSerialNumberInformation = false;
- }
-
- if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- - Controller->V2.NextEventSequenceNumber > 0)
- {
- CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
- CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
- Controller->V2.NextEventSequenceNumber >> 16;
- CommandMailbox->GetEvent.ControllerNumber = 0;
- CommandMailbox->GetEvent.IOCTL_Opcode =
- DAC960_V2_GetEvent;
- CommandMailbox->GetEvent.EventSequenceNumberLow16 =
- Controller->V2.NextEventSequenceNumber & 0xFFFF;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.EventDMA;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->GetEvent.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedPhysicalDeviceInformation)
- {
- if (Controller->V2.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Controller->V2.NewPhysicalDeviceInformation->Channel,
- Controller->V2.NewPhysicalDeviceInformation->TargetID,
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
-
-
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.StartPhysicalDeviceInformationScan)
- {
- Controller->V2.PhysicalDeviceIndex = 0;
- Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
- Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
- Controller->V2.StartPhysicalDeviceInformationScan = false;
- }
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
- Controller->V2.NewPhysicalDeviceInformation->TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
- Controller->V2.NewPhysicalDeviceInformation->Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedLogicalDeviceInformation)
- {
- if (Controller->V2.StartLogicalDeviceInformationScan)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber] = false;
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
- Controller->V2.StartLogicalDeviceInformationScan = false;
- }
- CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
- KernelCommand->CommandStatus = CommandStatus;
- KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
- KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
- Command->V2.KernelCommand = NULL;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V2_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-/*
- DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
- Controllers.
-
- Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
- on the data having been placed into DAC960_Controller_T, rather than
- an arbitrary buffer.
-*/
-
-static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- CommandMailbox->Common.CommandOpcode;
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- switch (CommandOpcode)
- {
- case DAC960_V1_Enquiry_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
- DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
- break;
- case DAC960_V1_GetDeviceState_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_GetDeviceState;
- DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
- break;
- case DAC960_V1_Read_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
- Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
- CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
- Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_MonitoringTimerFunction is the timer function for monitoring
- the status of DAC960 Controllers.
-*/
-
-static void DAC960_MonitoringTimerFunction(struct timer_list *t)
-{
- DAC960_Controller_T *Controller = from_timer(Controller, t, MonitoringTimer);
- DAC960_Command_T *Command;
- unsigned long flags;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V1_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- else
- {
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned int StatusChangeCounter =
- Controller->V2.HealthStatusBuffer->StatusChangeCounter;
- bool ForceMonitoringCommand = false;
- if (time_after(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL) continue;
- if (!LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized)
- {
- ForceMonitoringCommand = true;
- break;
- }
- }
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == Controller->V2.NextEventSequenceNumber &&
- (ControllerInfo->BackgroundInitializationsActive +
- ControllerInfo->LogicalDeviceInitializationsActive +
- ControllerInfo->PhysicalDeviceInitializationsActive +
- ControllerInfo->ConsistencyChecksActive +
- ControllerInfo->RebuildsActive +
- ControllerInfo->OnlineExpansionsActive == 0 ||
- time_before(jiffies, Controller->PrimaryMonitoringTime
- + DAC960_MonitoringTimerInterval)) &&
- !ForceMonitoringCommand)
- {
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- return;
- }
- Controller->V2.StatusChangeCounter = StatusChangeCounter;
- Controller->PrimaryMonitoringTime = jiffies;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V2_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- /*
- Wake up any processes waiting on a Health Status Buffer change.
- */
- wake_up(&Controller->HealthStatusWaitQueue);
- }
-}
-
-/*
- DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
- additional bytes in the Combined Status Buffer and grows the buffer if
- necessary. It returns true if there is enough room and false otherwise.
-*/
-
-static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
- unsigned int ByteCount)
-{
- unsigned char *NewStatusBuffer;
- if (Controller->InitialStatusLength + 1 +
- Controller->CurrentStatusLength + ByteCount + 1 <=
- Controller->CombinedStatusBufferLength)
- return true;
- if (Controller->CombinedStatusBufferLength == 0)
- {
- unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
- while (NewStatusBufferLength < ByteCount)
- NewStatusBufferLength *= 2;
- Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
- GFP_ATOMIC);
- if (Controller->CombinedStatusBuffer == NULL) return false;
- Controller->CombinedStatusBufferLength = NewStatusBufferLength;
- return true;
- }
- NewStatusBuffer = kmalloc_array(2, Controller->CombinedStatusBufferLength,
- GFP_ATOMIC);
- if (NewStatusBuffer == NULL)
- {
- DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
- Controller);
- return false;
- }
- memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
- Controller->CombinedStatusBufferLength);
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NewStatusBuffer;
- Controller->CombinedStatusBufferLength *= 2;
- Controller->CurrentStatusBuffer =
- &NewStatusBuffer[Controller->InitialStatusLength + 1];
- return true;
-}
-
-
-/*
- DAC960_Message prints Driver Messages.
-*/
-
-static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
- unsigned char *Format,
- DAC960_Controller_T *Controller,
- ...)
-{
- static unsigned char Buffer[DAC960_LineBufferSize];
- static bool BeginningOfLine = true;
- va_list Arguments;
- int Length = 0;
- va_start(Arguments, Controller);
- Length = vsprintf(Buffer, Format, Arguments);
- va_end(Arguments);
- if (Controller == NULL)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- DAC960_ControllerCount, Buffer);
- else if (MessageLevel == DAC960_AnnounceLevel ||
- MessageLevel == DAC960_InfoLevel)
- {
- if (!Controller->ControllerInitialized)
- {
- if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength],
- Buffer);
- Controller->InitialStatusLength += Length;
- Controller->CurrentStatusBuffer =
- &Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength + 1];
- }
- if (MessageLevel == DAC960_AnnounceLevel)
- {
- static int AnnouncementLines = 0;
- if (++AnnouncementLines <= 2)
- printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
- Buffer);
- }
- else
- {
- if (BeginningOfLine)
- {
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s",
- DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else printk("%s", Buffer);
- }
- }
- else if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CurrentStatusBuffer[
- Controller->CurrentStatusLength], Buffer);
- Controller->CurrentStatusLength += Length;
- }
- }
- else if (MessageLevel == DAC960_ProgressLevel)
- {
- strcpy(Controller->ProgressBuffer, Buffer);
- Controller->ProgressBufferLength = Length;
- if (Controller->EphemeralProgressMessage)
- {
- if (time_after_eq(jiffies, Controller->LastProgressReportTime
- + DAC960_ProgressReportingInterval))
- {
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- Controller->LastProgressReportTime = jiffies;
- }
- }
- else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else if (MessageLevel == DAC960_UserCriticalLevel)
- {
- strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
- Buffer);
- Controller->UserStatusLength += Length;
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else
- {
- if (BeginningOfLine)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- else printk("%s", Buffer);
- }
- BeginningOfLine = (Buffer[Length-1] == '\n');
-}
-
-
-/*
- DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
- Channel:TargetID specification from a User Command string. It updates
- Channel and TargetID and returns true on success and false on failure.
-*/
-
-static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *Channel,
- unsigned char *TargetID)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XChannel, XTargetID;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != ':' ||
- XChannel >= Controller->Channels)
- return false;
- UserCommandString = ++NewUserCommandString;
- XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XTargetID >= Controller->Targets)
- return false;
- *Channel = XChannel;
- *TargetID = XTargetID;
- return true;
-}
-
-
-/*
- DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
- specification from a User Command string. It updates LogicalDriveNumber and
- returns true on success and false on failure.
-*/
-
-static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *LogicalDriveNumber)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XLogicalDriveNumber;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XLogicalDriveNumber =
- simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
- return false;
- *LogicalDriveNumber = XLogicalDriveNumber;
- return true;
-}
-
-
-/*
- DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
- DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- DAC960_V1_PhysicalDeviceState_T
- DeviceState,
- const unsigned char *DeviceStateString)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.DeviceState = DeviceState;
- CommandMailbox->Type3D.Modifier = 0;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_UnableToStartDevice:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unable to Start Device\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_NoDeviceAtAddress:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "No Device at Address\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_InvalidChannelOrTargetOrModifier:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Invalid Channel or Target or Modifier\n",
- Controller, DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_ChannelBusy:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Channel Busy\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- DeviceStateString, Channel, TargetID,
- Command->V1.CommandStatus);
- break;
- }
-}
-
-
-/*
- DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
- Controllers.
-*/
-
-static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V1_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V1.CommandMailbox;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState != DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Dead, "Kill");
- else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Online, "Make Online");
- else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
-
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Standby, "Make Standby");
- else DAC960_UserCritical("Make Standby of Physical "
- "Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID))
- {
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_AttemptToRebuildOnlineDrive:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Attempt to Rebuild Online or "
- "Unresponsive Drive\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_NewDiskFailedDuringRebuild:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "New Disk Failed During Rebuild\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_InvalidDeviceAddress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Invalid Device Address\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Rebuild or Consistency Check Already "
- "in Progress\n", Controller, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- Channel, TargetID, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
- CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
- CommandMailbox->Type3C.AutoRestore = true;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Initiated\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_DependentDiskIsDead:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Dependent Physical Device is DEAD\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_InvalidOrNonredundantLogicalDrive:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Invalid or Nonredundant Logical Drive\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - Rebuild or "
- "Consistency Check Already in Progress\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- default:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Unexpected Status %04X\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
- strcmp(UserCommand, "cancel-consistency-check") == 0)
- {
- /*
- the OldRebuildRateConstant is never actually used
- once its value is retrieved from the controller.
- */
- unsigned char *OldRebuildRateConstant;
- dma_addr_t OldRebuildRateConstantDMA;
-
- OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
- sizeof(char), &OldRebuildRateConstantDMA);
- if (OldRebuildRateConstant == NULL) {
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Out of Memory",
- Controller);
- goto failure;
- }
- CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
- CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
- CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
- Controller);
- break;
- default:
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Unexpected Status %04X\n",
- Controller, Command->V1.CommandStatus);
- break;
- }
-failure:
- pci_free_consistent(Controller->PCIDevice, sizeof(char),
- OldRebuildRateConstant, OldRebuildRateConstantDMA);
- }
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-
-/*
- DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
- TargetID into a Logical Device. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned short
- *LogicalDeviceNumber)
-{
- DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
- DAC960_Controller_T *Controller = Command->Controller;
-
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(&SavedCommandMailbox, CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
-
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_TranslatePhysicalToLogicalDevice;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.PhysicalToLogicalDeviceDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
-
- DAC960_ExecuteCommand(Command);
- *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
-
- memcpy(CommandMailbox, &SavedCommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
- Controllers.
-*/
-
-static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
- unsigned short LogicalDeviceNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
- CommandMailbox->DeviceOperation.OperationDevice =
- DAC960_V2_RAID_Controller;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Dead;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Online;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Standby;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStart;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStart;
- CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
- CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strcmp(UserCommand, "perform-discovery") == 0)
- {
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Discovery %s\n", Controller,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
- {
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode =
- DAC960_V2_GetControllerInfo;
- /*
- * How does this NOT race with the queued Monitoring
- * usage of this structure?
- */
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- while (1) {
- DAC960_ExecuteCommand(Command);
- if (!Controller->V2.NewControllerInformation->PhysicalScanActive)
- break;
- msleep(1000);
- }
- DAC960_UserCritical("Discovery Completed\n", Controller);
- }
- }
- else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
- Controller->SuppressEnclosureMessages = true;
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-static int __maybe_unused dac960_proc_show(struct seq_file *m, void *v)
-{
- unsigned char *StatusMessage = "OK\n";
- int ControllerNumber;
- for (ControllerNumber = 0;
- ControllerNumber < DAC960_ControllerCount;
- ControllerNumber++)
- {
- DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) continue;
- if (Controller->MonitoringAlertMode)
- {
- StatusMessage = "ALERT\n";
- break;
- }
- }
- seq_puts(m, StatusMessage);
- return 0;
-}
-
-static int __maybe_unused dac960_initial_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
- seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
- return 0;
-}
-
-static int __maybe_unused dac960_current_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
- unsigned char *StatusMessage =
- "No Rebuild or Consistency Check in Progress\n";
- int ProgressMessageLength = strlen(StatusMessage);
- if (jiffies != Controller->LastCurrentStatusTime)
- {
- Controller->CurrentStatusLength = 0;
- DAC960_AnnounceDriver(Controller);
- DAC960_ReportControllerConfiguration(Controller);
- DAC960_ReportDeviceConfiguration(Controller);
- if (Controller->ProgressBufferLength > 0)
- ProgressMessageLength = Controller->ProgressBufferLength;
- if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
- {
- unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- if (Controller->ProgressBufferLength > 0)
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- Controller->ProgressBuffer);
- else
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- StatusMessage);
- Controller->CurrentStatusLength += ProgressMessageLength;
- }
- Controller->LastCurrentStatusTime = jiffies;
- }
- seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_show(struct seq_file *m, void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
-
- seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dac960_user_command_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t dac960_user_command_proc_write(struct file *file,
- const char __user *Buffer,
- size_t Count, loff_t *pos)
-{
- DAC960_Controller_T *Controller = PDE_DATA(file_inode(file));
- unsigned char CommandBuffer[80];
- int Length;
- if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
- if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
- CommandBuffer[Count] = '\0';
- Length = strlen(CommandBuffer);
- if (Length > 0 && CommandBuffer[Length-1] == '\n')
- CommandBuffer[--Length] = '\0';
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
- else
- return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
-}
-
-static const struct file_operations dac960_user_command_proc_fops = {
- .owner = THIS_MODULE,
- .open = dac960_user_command_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dac960_user_command_proc_write,
-};
-
-/*
- DAC960_CreateProcEntries creates the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
-{
- struct proc_dir_entry *ControllerProcEntry;
-
- if (DAC960_ProcDirectoryEntry == NULL) {
- DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
- proc_create_single("status", 0, DAC960_ProcDirectoryEntry,
- dac960_proc_show);
- }
-
- snprintf(Controller->ControllerName, sizeof(Controller->ControllerName),
- "c%d", Controller->ControllerNumber);
- ControllerProcEntry = proc_mkdir(Controller->ControllerName,
- DAC960_ProcDirectoryEntry);
- proc_create_single_data("initial_status", 0, ControllerProcEntry,
- dac960_initial_status_proc_show, Controller);
- proc_create_single_data("current_status", 0, ControllerProcEntry,
- dac960_current_status_proc_show, Controller);
- proc_create_data("user_command", 0600, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
- Controller->ControllerProcEntry = ControllerProcEntry;
-}
-
-
-/*
- DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerProcEntry == NULL)
- return;
- remove_proc_entry("initial_status", Controller->ControllerProcEntry);
- remove_proc_entry("current_status", Controller->ControllerProcEntry);
- remove_proc_entry("user_command", Controller->ControllerProcEntry);
- remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
- Controller->ControllerProcEntry = NULL;
-}
-
-#ifdef DAC960_GAM_MINOR
-
-static long DAC960_gam_get_controller_info(DAC960_ControllerInfo_T __user *UserSpaceControllerInfo)
-{
- DAC960_ControllerInfo_T ControllerInfo;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceControllerInfo == NULL)
- ErrorCode = -EINVAL;
- else ErrorCode = get_user(ControllerNumber,
- &UserSpaceControllerInfo->ControllerNumber);
- if (ErrorCode != 0)
- goto out;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1) {
- goto out;
- }
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
- ControllerInfo.ControllerNumber = ControllerNumber;
- ControllerInfo.FirmwareType = Controller->FirmwareType;
- ControllerInfo.Channels = Controller->Channels;
- ControllerInfo.Targets = Controller->Targets;
- ControllerInfo.PCI_Bus = Controller->Bus;
- ControllerInfo.PCI_Device = Controller->Device;
- ControllerInfo.PCI_Function = Controller->Function;
- ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
- ControllerInfo.PCI_Address = Controller->PCI_Address;
- strcpy(ControllerInfo.ModelName, Controller->ModelName);
- strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
- ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
- sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v1_execute_command(DAC960_V1_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V1_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V1_CommandOpcode_T CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_DCDB_T DCDB;
- DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
- dma_addr_t DCDB_IOBUFDMA;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- long ErrorCode;
-
- if (UserSpaceUserCommand == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V1_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ControllerNumber = UserCommand.ControllerNumber;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- ErrorCode = -EINVAL;
- if (Controller->FirmwareType != DAC960_V1_Controller)
- goto out;
- CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
- DataTransferLength = UserCommand.DataTransferLength;
- if (CommandOpcode & 0x80)
- goto out;
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- if (copy_from_user(&DCDB, UserCommand.DCDB,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- if (DCDB.Channel >= DAC960_V1_MaxChannels)
- goto out;
- if (!((DataTransferLength == 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_NoDataTransfer) ||
- (DataTransferLength > 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
- (DataTransferLength < 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferSystemToDevice)))
- goto out;
- if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
- != abs(DataTransferLength))
- goto out;
- DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
- sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
- if (DCDB_IOBUF == NULL) {
- ErrorCode = -ENOMEM;
- goto out;
- }
- }
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto out;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- while (Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID])
- {
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue,
- !Controller->V1.DirectCommandActive
- [DCDB.Channel][DCDB.TargetID]);
- spin_lock_irq(&Controller->queue_lock);
- }
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
- DCDB.BusAddress = DataTransferBufferDMA;
- memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
- }
- else
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- if (DataTransferBuffer != NULL)
- Command->V1.CommandMailbox.Type3.BusAddress =
- DataTransferBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- I don't believe Target or Channel in the DCDB_IOBUF
- should be any different from the contents of DCDB.
- */
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = false;
- if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- ErrorCode = CommandStatus;
- Failure1:
- if (DataTransferBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (DCDB_IOBUF != NULL)
- pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
- DCDB_IOBUF, DCDB_IOBUFDMA);
- out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_execute_command(DAC960_V2_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V2_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- int DataTransferResidue, RequestSenseLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- unsigned char *RequestSenseBuffer = NULL;
- dma_addr_t RequestSenseBufferDMA;
- long ErrorCode = -EINVAL;
-
- if (UserSpaceUserCommand == NULL)
- goto out;
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V2_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = UserCommand.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller){
- ErrorCode = -EINVAL;
- goto out;
- }
- DataTransferLength = UserCommand.DataTransferLength;
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (RequestSenseLength > 0)
- {
- RequestSenseBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- RequestSenseLength,
- &RequestSenseBufferDMA);
- if (RequestSenseBuffer == NULL)
- {
- ErrorCode = -ENOMEM;
- goto Failure2;
- }
- }
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->Common.CommandControlBits
- .AdditionalScatterGatherListMemory = false;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = 0;
- CommandMailbox->Common.DataTransferPageNumber = 0;
- memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
- sizeof(DAC960_V2_DataTransferMemoryAddress_T));
- if (DataTransferLength != 0)
- {
- if (DataTransferLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.DataTransferSize = DataTransferLength;
- }
- else
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = false;
- CommandMailbox->Common.DataTransferSize = -DataTransferLength;
- }
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer = DataTransferBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- }
- if (RequestSenseLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = false;
- CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
- CommandMailbox->Common.RequestSenseBusAddress =
- RequestSenseBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- RequestSenseLength = Command->V2.RequestSenseLength;
- DataTransferResidue = Command->V2.DataTransferResidue;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (RequestSenseLength > UserCommand.RequestSenseLength)
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
- &DataTransferResidue,
- sizeof(DataTransferResidue))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
- &RequestSenseLength, sizeof(RequestSenseLength))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- if (RequestSenseLength > 0)
- {
- if (copy_to_user(UserCommand.RequestSenseBuffer,
- RequestSenseBuffer, RequestSenseLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- ErrorCode = CommandStatus;
- Failure2:
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (RequestSenseBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
- RequestSenseBuffer, RequestSenseBufferDMA);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_get_health_status(DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus)
-{
- DAC960_V2_GetHealthStatus_T GetHealthStatus;
- DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceGetHealthStatus == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
- sizeof(DAC960_V2_GetHealthStatus_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = GetHealthStatus.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&HealthStatusBuffer,
- GetHealthStatus.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = wait_event_interruptible_timeout(Controller->HealthStatusWaitQueue,
- !(Controller->V2.HealthStatusBuffer->StatusChangeCounter
- == HealthStatusBuffer.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == HealthStatusBuffer.NextEventSequenceNumber),
- DAC960_MonitoringTimerInterval);
- if (ErrorCode == -ERESTARTSYS) {
- ErrorCode = -EINTR;
- goto out;
- }
- if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
- Controller->V2.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T)))
- ErrorCode = -EFAULT;
- else
- ErrorCode = 0;
-
-out:
- return ErrorCode;
-}
-
-/*
- * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
-*/
-
-static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
- unsigned long Argument)
-{
- long ErrorCode = 0;
- void __user *argp = (void __user *)Argument;
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-
- mutex_lock(&DAC960_mutex);
- switch (Request)
- {
- case DAC960_IOCTL_GET_CONTROLLER_COUNT:
- ErrorCode = DAC960_ControllerCount;
- break;
- case DAC960_IOCTL_GET_CONTROLLER_INFO:
- ErrorCode = DAC960_gam_get_controller_info(argp);
- break;
- case DAC960_IOCTL_V1_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v1_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v2_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
- ErrorCode = DAC960_gam_v2_get_health_status(argp);
- break;
- default:
- ErrorCode = -ENOTTY;
- }
- mutex_unlock(&DAC960_mutex);
- return ErrorCode;
-}
-
-static const struct file_operations DAC960_gam_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = DAC960_gam_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice DAC960_gam_dev = {
- DAC960_GAM_MINOR,
- "dac960_gam",
- &DAC960_gam_fops
-};
-
-static int DAC960_gam_init(void)
-{
- int ret;
-
- ret = misc_register(&DAC960_gam_dev);
- if (ret)
- printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
- return ret;
-}
-
-static void DAC960_gam_cleanup(void)
-{
- misc_deregister(&DAC960_gam_dev);
-}
-
-#endif /* DAC960_GAM_MINOR */
-
-static struct DAC960_privdata DAC960_GEM_privdata = {
- .HardwareType = DAC960_GEM_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_GEM_InterruptHandler,
- .MemoryWindowSize = DAC960_GEM_RegisterWindowSize,
-};
-
-
-static struct DAC960_privdata DAC960_BA_privdata = {
- .HardwareType = DAC960_BA_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_BA_InterruptHandler,
- .MemoryWindowSize = DAC960_BA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LP_privdata = {
- .HardwareType = DAC960_LP_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_LP_InterruptHandler,
- .MemoryWindowSize = DAC960_LP_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LA_privdata = {
- .HardwareType = DAC960_LA_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_LA_InterruptHandler,
- .MemoryWindowSize = DAC960_LA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PG_privdata = {
- .HardwareType = DAC960_PG_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PG_InterruptHandler,
- .MemoryWindowSize = DAC960_PG_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PD_privdata = {
- .HardwareType = DAC960_PD_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PD_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_P_privdata = {
- .HardwareType = DAC960_P_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_P_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static const struct pci_device_id DAC960_id_table[] = {
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_GEM_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_BA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_BA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_LP,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_LP_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_DEC,
- .device = PCI_DEVICE_ID_DEC_21285,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_DEVICE_ID_MYLEX_DAC960_LA,
- .driver_data = (unsigned long) &DAC960_LA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PG,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PG_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PD_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_P_privdata,
- },
- {0, },
-};
-
-MODULE_DEVICE_TABLE(pci, DAC960_id_table);
-
-static struct pci_driver DAC960_pci_driver = {
- .name = "DAC960",
- .id_table = DAC960_id_table,
- .probe = DAC960_Probe,
- .remove = DAC960_Remove,
-};
-
-static int __init DAC960_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&DAC960_pci_driver);
-#ifdef DAC960_GAM_MINOR
- if (!ret)
- DAC960_gam_init();
-#endif
- return ret;
-}
-
-static void __exit DAC960_cleanup_module(void)
-{
- int i;
-
-#ifdef DAC960_GAM_MINOR
- DAC960_gam_cleanup();
-#endif
-
- for (i = 0; i < DAC960_ControllerCount; i++) {
- DAC960_Controller_T *Controller = DAC960_Controllers[i];
- if (Controller == NULL)
- continue;
- DAC960_FinalizeController(Controller);
- }
- if (DAC960_ProcDirectoryEntry != NULL) {
- remove_proc_entry("rd/status", NULL);
- remove_proc_entry("rd", NULL);
- }
- DAC960_ControllerCount = 0;
- pci_unregister_driver(&DAC960_pci_driver);
-}
-
-module_init(DAC960_init_module);
-module_exit(DAC960_cleanup_module);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h
deleted file mode 100644
index 1439e651928b..000000000000
--- a/drivers/block/DAC960.h
+++ /dev/null
@@ -1,4414 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
- The author respectfully requests that any modifications to this software be
- sent directly to him for evaluation and testing.
-
-*/
-
-
-/*
- Define the maximum number of DAC960 Controllers supported by this driver.
-*/
-
-#define DAC960_MaxControllers 8
-
-
-/*
- Define the maximum number of Controller Channels supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxChannels 3
-#define DAC960_V2_MaxChannels 4
-
-
-/*
- Define the maximum number of Targets per Channel supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxTargets 16
-#define DAC960_V2_MaxTargets 128
-
-
-/*
- Define the maximum number of Logical Drives supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxLogicalDrives 32
-
-
-/*
- Define the maximum number of Physical Devices supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxPhysicalDevices 45
-#define DAC960_V2_MaxPhysicalDevices 272
-
-/*
- Define a 32/64 bit I/O Address data type.
-*/
-
-typedef unsigned long DAC960_IO_Address_T;
-
-
-/*
- Define a 32/64 bit PCI Bus Address data type.
-*/
-
-typedef unsigned long DAC960_PCI_Address_T;
-
-
-/*
- Define a 32 bit Bus Address data type.
-*/
-
-typedef unsigned int DAC960_BusAddress32_T;
-
-
-/*
- Define a 64 bit Bus Address data type.
-*/
-
-typedef unsigned long long DAC960_BusAddress64_T;
-
-
-/*
- Define a 32 bit Byte Count data type.
-*/
-
-typedef unsigned int DAC960_ByteCount32_T;
-
-
-/*
- Define a 64 bit Byte Count data type.
-*/
-
-typedef unsigned long long DAC960_ByteCount64_T;
-
-
-/*
- dma_loaf is used by helper routines to divide a region of
- dma mapped memory into smaller pieces, where those pieces
- are not of uniform size.
- */
-
-struct dma_loaf {
- void *cpu_base;
- dma_addr_t dma_base;
- size_t length;
- void *cpu_free;
- dma_addr_t dma_free;
-};
-
-/*
- Define the SCSI INQUIRY Standard Data structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
- bool RMB:1; /* Byte 1 Bit 7 */
- unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
- unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
- unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
- unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
- unsigned char :2; /* Byte 3 Bits 4-5 */
- bool TrmIOP:1; /* Byte 3 Bit 6 */
- bool AENC:1; /* Byte 3 Bit 7 */
- unsigned char AdditionalLength; /* Byte 4 */
- unsigned char :8; /* Byte 5 */
- unsigned char :8; /* Byte 6 */
- bool SftRe:1; /* Byte 7 Bit 0 */
- bool CmdQue:1; /* Byte 7 Bit 1 */
- bool :1; /* Byte 7 Bit 2 */
- bool Linked:1; /* Byte 7 Bit 3 */
- bool Sync:1; /* Byte 7 Bit 4 */
- bool WBus16:1; /* Byte 7 Bit 5 */
- bool WBus32:1; /* Byte 7 Bit 6 */
- bool RelAdr:1; /* Byte 7 Bit 7 */
- unsigned char VendorIdentification[8]; /* Bytes 8-15 */
- unsigned char ProductIdentification[16]; /* Bytes 16-31 */
- unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
-}
-DAC960_SCSI_Inquiry_T;
-
-
-/*
- Define the SCSI INQUIRY Unit Serial Number structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry_UnitSerialNumber
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char PageCode; /* Byte 1 */
- unsigned char :8; /* Byte 2 */
- unsigned char PageLength; /* Byte 3 */
- unsigned char ProductSerialNumber[28]; /* Bytes 4-31 */
-}
-DAC960_SCSI_Inquiry_UnitSerialNumber_T;
-
-
-/*
- Define the SCSI REQUEST SENSE Sense Key type.
-*/
-
-typedef enum
-{
- DAC960_SenseKey_NoSense = 0x0,
- DAC960_SenseKey_RecoveredError = 0x1,
- DAC960_SenseKey_NotReady = 0x2,
- DAC960_SenseKey_MediumError = 0x3,
- DAC960_SenseKey_HardwareError = 0x4,
- DAC960_SenseKey_IllegalRequest = 0x5,
- DAC960_SenseKey_UnitAttention = 0x6,
- DAC960_SenseKey_DataProtect = 0x7,
- DAC960_SenseKey_BlankCheck = 0x8,
- DAC960_SenseKey_VendorSpecific = 0x9,
- DAC960_SenseKey_CopyAborted = 0xA,
- DAC960_SenseKey_AbortedCommand = 0xB,
- DAC960_SenseKey_Equal = 0xC,
- DAC960_SenseKey_VolumeOverflow = 0xD,
- DAC960_SenseKey_Miscompare = 0xE,
- DAC960_SenseKey_Reserved = 0xF
-}
-__attribute__ ((packed))
-DAC960_SCSI_RequestSenseKey_T;
-
-
-/*
- Define the SCSI REQUEST SENSE structure.
-*/
-
-typedef struct DAC960_SCSI_RequestSense
-{
- unsigned char ErrorCode:7; /* Byte 0 Bits 0-6 */
- bool Valid:1; /* Byte 0 Bit 7 */
- unsigned char SegmentNumber; /* Byte 1 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 2 Bits 0-3 */
- unsigned char :1; /* Byte 2 Bit 4 */
- bool ILI:1; /* Byte 2 Bit 5 */
- bool EOM:1; /* Byte 2 Bit 6 */
- bool Filemark:1; /* Byte 2 Bit 7 */
- unsigned char Information[4]; /* Bytes 3-6 */
- unsigned char AdditionalSenseLength; /* Byte 7 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 8-11 */
- unsigned char AdditionalSenseCode; /* Byte 12 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 13 */
-}
-DAC960_SCSI_RequestSense_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- /* I/O Commands */
- DAC960_V1_ReadExtended = 0x33,
- DAC960_V1_WriteExtended = 0x34,
- DAC960_V1_ReadAheadExtended = 0x35,
- DAC960_V1_ReadExtendedWithScatterGather = 0xB3,
- DAC960_V1_WriteExtendedWithScatterGather = 0xB4,
- DAC960_V1_Read = 0x36,
- DAC960_V1_ReadWithScatterGather = 0xB6,
- DAC960_V1_Write = 0x37,
- DAC960_V1_WriteWithScatterGather = 0xB7,
- DAC960_V1_DCDB = 0x04,
- DAC960_V1_DCDBWithScatterGather = 0x84,
- DAC960_V1_Flush = 0x0A,
- /* Controller Status Related Commands */
- DAC960_V1_Enquiry = 0x53,
- DAC960_V1_Enquiry2 = 0x1C,
- DAC960_V1_GetLogicalDriveElement = 0x55,
- DAC960_V1_GetLogicalDriveInformation = 0x19,
- DAC960_V1_IOPortRead = 0x39,
- DAC960_V1_IOPortWrite = 0x3A,
- DAC960_V1_GetSDStats = 0x3E,
- DAC960_V1_GetPDStats = 0x3F,
- DAC960_V1_PerformEventLogOperation = 0x72,
- /* Device Related Commands */
- DAC960_V1_StartDevice = 0x10,
- DAC960_V1_GetDeviceState = 0x50,
- DAC960_V1_StopChannel = 0x13,
- DAC960_V1_StartChannel = 0x12,
- DAC960_V1_ResetChannel = 0x1A,
- /* Commands Associated with Data Consistency and Errors */
- DAC960_V1_Rebuild = 0x09,
- DAC960_V1_RebuildAsync = 0x16,
- DAC960_V1_CheckConsistency = 0x0F,
- DAC960_V1_CheckConsistencyAsync = 0x1E,
- DAC960_V1_RebuildStat = 0x0C,
- DAC960_V1_GetRebuildProgress = 0x27,
- DAC960_V1_RebuildControl = 0x1F,
- DAC960_V1_ReadBadBlockTable = 0x0B,
- DAC960_V1_ReadBadDataTable = 0x25,
- DAC960_V1_ClearBadDataTable = 0x26,
- DAC960_V1_GetErrorTable = 0x17,
- DAC960_V1_AddCapacityAsync = 0x2A,
- DAC960_V1_BackgroundInitializationControl = 0x2B,
- /* Configuration Related Commands */
- DAC960_V1_ReadConfig2 = 0x3D,
- DAC960_V1_WriteConfig2 = 0x3C,
- DAC960_V1_ReadConfigurationOnDisk = 0x4A,
- DAC960_V1_WriteConfigurationOnDisk = 0x4B,
- DAC960_V1_ReadConfiguration = 0x4E,
- DAC960_V1_ReadBackupConfiguration = 0x4D,
- DAC960_V1_WriteConfiguration = 0x4F,
- DAC960_V1_AddConfiguration = 0x4C,
- DAC960_V1_ReadConfigurationLabel = 0x48,
- DAC960_V1_WriteConfigurationLabel = 0x49,
- /* Firmware Upgrade Related Commands */
- DAC960_V1_LoadImage = 0x20,
- DAC960_V1_StoreImage = 0x21,
- DAC960_V1_ProgramImage = 0x22,
- /* Diagnostic Commands */
- DAC960_V1_SetDiagnosticMode = 0x31,
- DAC960_V1_RunDiagnostic = 0x32,
- /* Subsystem Service Commands */
- DAC960_V1_GetSubsystemData = 0x70,
- DAC960_V1_SetSubsystemParameters = 0x71,
- /* Version 2.xx Firmware Commands */
- DAC960_V1_Enquiry_Old = 0x05,
- DAC960_V1_GetDeviceState_Old = 0x14,
- DAC960_V1_Read_Old = 0x02,
- DAC960_V1_Write_Old = 0x03,
- DAC960_V1_ReadWithScatterGather_Old = 0x82,
- DAC960_V1_WriteWithScatterGather_Old = 0x83
-}
-__attribute__ ((packed))
-DAC960_V1_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Identifier type.
-*/
-
-typedef unsigned char DAC960_V1_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Status Codes.
-*/
-
-#define DAC960_V1_NormalCompletion 0x0000 /* Common */
-#define DAC960_V1_CheckConditionReceived 0x0002 /* Common */
-#define DAC960_V1_NoDeviceAtAddress 0x0102 /* Common */
-#define DAC960_V1_InvalidDeviceAddress 0x0105 /* Common */
-#define DAC960_V1_InvalidParameter 0x0105 /* Common */
-#define DAC960_V1_IrrecoverableDataError 0x0001 /* I/O */
-#define DAC960_V1_LogicalDriveNonexistentOrOffline 0x0002 /* I/O */
-#define DAC960_V1_AccessBeyondEndOfLogicalDrive 0x0105 /* I/O */
-#define DAC960_V1_BadDataEncountered 0x010C /* I/O */
-#define DAC960_V1_DeviceBusy 0x0008 /* DCDB */
-#define DAC960_V1_DeviceNonresponsive 0x000E /* DCDB */
-#define DAC960_V1_CommandTerminatedAbnormally 0x000F /* DCDB */
-#define DAC960_V1_UnableToStartDevice 0x0002 /* Device */
-#define DAC960_V1_InvalidChannelOrTargetOrModifier 0x0105 /* Device */
-#define DAC960_V1_ChannelBusy 0x0106 /* Device */
-#define DAC960_V1_ChannelNotStopped 0x0002 /* Device */
-#define DAC960_V1_AttemptToRebuildOnlineDrive 0x0002 /* Consistency */
-#define DAC960_V1_RebuildBadBlocksEncountered 0x0003 /* Consistency */
-#define DAC960_V1_NewDiskFailedDuringRebuild 0x0004 /* Consistency */
-#define DAC960_V1_RebuildOrCheckAlreadyInProgress 0x0106 /* Consistency */
-#define DAC960_V1_DependentDiskIsDead 0x0002 /* Consistency */
-#define DAC960_V1_InconsistentBlocksFound 0x0003 /* Consistency */
-#define DAC960_V1_InvalidOrNonredundantLogicalDrive 0x0105 /* Consistency */
-#define DAC960_V1_NoRebuildOrCheckInProgress 0x0105 /* Consistency */
-#define DAC960_V1_RebuildInProgress_DataValid 0x0000 /* Consistency */
-#define DAC960_V1_RebuildFailed_LogicalDriveFailure 0x0002 /* Consistency */
-#define DAC960_V1_RebuildFailed_BadBlocksOnOther 0x0003 /* Consistency */
-#define DAC960_V1_RebuildFailed_NewDriveFailed 0x0004 /* Consistency */
-#define DAC960_V1_RebuildSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_RebuildSuccessfullyTerminated 0x0107 /* Consistency */
-#define DAC960_V1_BackgroundInitSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_BackgroundInitAborted 0x0005 /* Consistency */
-#define DAC960_V1_NoBackgroundInitInProgress 0x0105 /* Consistency */
-#define DAC960_V1_AddCapacityInProgress 0x0004 /* Consistency */
-#define DAC960_V1_AddCapacityFailedOrSuspended 0x00F4 /* Consistency */
-#define DAC960_V1_Config2ChecksumError 0x0002 /* Configuration */
-#define DAC960_V1_ConfigurationSuspended 0x0106 /* Configuration */
-#define DAC960_V1_FailedToConfigureNVRAM 0x0105 /* Configuration */
-#define DAC960_V1_ConfigurationNotSavedStateChange 0x0106 /* Configuration */
-#define DAC960_V1_SubsystemNotInstalled 0x0001 /* Subsystem */
-#define DAC960_V1_SubsystemFailed 0x0002 /* Subsystem */
-#define DAC960_V1_SubsystemBusy 0x0106 /* Subsystem */
-
-typedef unsigned short DAC960_V1_CommandStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry
-{
- unsigned char NumberOfLogicalDrives; /* Byte 0 */
- unsigned int :24; /* Bytes 1-3 */
- unsigned int LogicalDriveSizes[32]; /* Bytes 4-131 */
- unsigned short FlashAge; /* Bytes 132-133 */
- struct {
- bool DeferredWriteError:1; /* Byte 134 Bit 0 */
- bool BatteryLow:1; /* Byte 134 Bit 1 */
- unsigned char :6; /* Byte 134 Bits 2-7 */
- } StatusFlags;
- unsigned char :8; /* Byte 135 */
- unsigned char MinorFirmwareVersion; /* Byte 136 */
- unsigned char MajorFirmwareVersion; /* Byte 137 */
- enum {
- DAC960_V1_NoStandbyRebuildOrCheckInProgress = 0x00,
- DAC960_V1_StandbyRebuildInProgress = 0x01,
- DAC960_V1_BackgroundRebuildInProgress = 0x02,
- DAC960_V1_BackgroundCheckInProgress = 0x03,
- DAC960_V1_StandbyRebuildCompletedWithError = 0xFF,
- DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed = 0xF0,
- DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed = 0xF1,
- DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses = 0xF2,
- DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated = 0xF3
- } __attribute__ ((packed)) RebuildFlag; /* Byte 138 */
- unsigned char MaxCommands; /* Byte 139 */
- unsigned char OfflineLogicalDriveCount; /* Byte 140 */
- unsigned char :8; /* Byte 141 */
- unsigned short EventLogSequenceNumber; /* Bytes 142-143 */
- unsigned char CriticalLogicalDriveCount; /* Byte 144 */
- unsigned int :24; /* Bytes 145-147 */
- unsigned char DeadDriveCount; /* Byte 148 */
- unsigned char :8; /* Byte 149 */
- unsigned char RebuildCount; /* Byte 150 */
- struct {
- unsigned char :3; /* Byte 151 Bits 0-2 */
- bool BatteryBackupUnitPresent:1; /* Byte 151 Bit 3 */
- unsigned char :3; /* Byte 151 Bits 4-6 */
- unsigned char :1; /* Byte 151 Bit 7 */
- } MiscFlags;
- struct {
- unsigned char TargetID;
- unsigned char Channel;
- } DeadDrives[21]; /* Bytes 152-194 */
- unsigned char Reserved[62]; /* Bytes 195-255 */
-}
-__attribute__ ((packed))
-DAC960_V1_Enquiry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry2
-{
- struct {
- enum {
- DAC960_V1_P_PD_PU = 0x01,
- DAC960_V1_PL = 0x02,
- DAC960_V1_PG = 0x10,
- DAC960_V1_PJ = 0x11,
- DAC960_V1_PR = 0x12,
- DAC960_V1_PT = 0x13,
- DAC960_V1_PTL0 = 0x14,
- DAC960_V1_PRL = 0x15,
- DAC960_V1_PTL1 = 0x16,
- DAC960_V1_1164P = 0x20
- } __attribute__ ((packed)) SubModel; /* Byte 0 */
- unsigned char ActualChannels; /* Byte 1 */
- enum {
- DAC960_V1_FiveChannelBoard = 0x01,
- DAC960_V1_ThreeChannelBoard = 0x02,
- DAC960_V1_TwoChannelBoard = 0x03,
- DAC960_V1_ThreeChannelASIC_DAC = 0x04
- } __attribute__ ((packed)) Model; /* Byte 2 */
- enum {
- DAC960_V1_EISA_Controller = 0x01,
- DAC960_V1_MicroChannel_Controller = 0x02,
- DAC960_V1_PCI_Controller = 0x03,
- DAC960_V1_SCSItoSCSI_Controller = 0x08
- } __attribute__ ((packed)) ProductFamily; /* Byte 3 */
- } HardwareID; /* Bytes 0-3 */
- /* MajorVersion.MinorVersion-FirmwareType-TurnID */
- struct {
- unsigned char MajorVersion; /* Byte 4 */
- unsigned char MinorVersion; /* Byte 5 */
- unsigned char TurnID; /* Byte 6 */
- char FirmwareType; /* Byte 7 */
- } FirmwareID; /* Bytes 4-7 */
- unsigned char :8; /* Byte 8 */
- unsigned int :24; /* Bytes 9-11 */
- unsigned char ConfiguredChannels; /* Byte 12 */
- unsigned char ActualChannels; /* Byte 13 */
- unsigned char MaxTargets; /* Byte 14 */
- unsigned char MaxTags; /* Byte 15 */
- unsigned char MaxLogicalDrives; /* Byte 16 */
- unsigned char MaxArms; /* Byte 17 */
- unsigned char MaxSpans; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int MemorySize; /* Bytes 24-27 */
- unsigned int CacheSize; /* Bytes 28-31 */
- unsigned int FlashMemorySize; /* Bytes 32-35 */
- unsigned int NonVolatileMemorySize; /* Bytes 36-39 */
- struct {
- enum {
- DAC960_V1_RamType_DRAM = 0x0,
- DAC960_V1_RamType_EDO = 0x1,
- DAC960_V1_RamType_SDRAM = 0x2,
- DAC960_V1_RamType_Last = 0x7
- } __attribute__ ((packed)) RamType:3; /* Byte 40 Bits 0-2 */
- enum {
- DAC960_V1_ErrorCorrection_None = 0x0,
- DAC960_V1_ErrorCorrection_Parity = 0x1,
- DAC960_V1_ErrorCorrection_ECC = 0x2,
- DAC960_V1_ErrorCorrection_Last = 0x7
- } __attribute__ ((packed)) ErrorCorrection:3; /* Byte 40 Bits 3-5 */
- bool FastPageMode:1; /* Byte 40 Bit 6 */
- bool LowPowerMemory:1; /* Byte 40 Bit 7 */
- unsigned char :8; /* Bytes 41 */
- } MemoryType;
- unsigned short ClockSpeed; /* Bytes 42-43 */
- unsigned short MemorySpeed; /* Bytes 44-45 */
- unsigned short HardwareSpeed; /* Bytes 46-47 */
- unsigned int :32; /* Bytes 48-51 */
- unsigned int :32; /* Bytes 52-55 */
- unsigned char :8; /* Byte 56 */
- unsigned char :8; /* Byte 57 */
- unsigned short :16; /* Bytes 58-59 */
- unsigned short MaxCommands; /* Bytes 60-61 */
- unsigned short MaxScatterGatherEntries; /* Bytes 62-63 */
- unsigned short MaxDriveCommands; /* Bytes 64-65 */
- unsigned short MaxIODescriptors; /* Bytes 66-67 */
- unsigned short MaxCombinedSectors; /* Bytes 68-69 */
- unsigned char Latency; /* Byte 70 */
- unsigned char :8; /* Byte 71 */
- unsigned char SCSITimeout; /* Byte 72 */
- unsigned char :8; /* Byte 73 */
- unsigned short MinFreeLines; /* Bytes 74-75 */
- unsigned int :32; /* Bytes 76-79 */
- unsigned int :32; /* Bytes 80-83 */
- unsigned char RebuildRateConstant; /* Byte 84 */
- unsigned char :8; /* Byte 85 */
- unsigned char :8; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
- unsigned int :32; /* Bytes 88-91 */
- unsigned int :32; /* Bytes 92-95 */
- unsigned short PhysicalDriveBlockSize; /* Bytes 96-97 */
- unsigned short LogicalDriveBlockSize; /* Bytes 98-99 */
- unsigned short MaxBlocksPerCommand; /* Bytes 100-101 */
- unsigned short BlockFactor; /* Bytes 102-103 */
- unsigned short CacheLineSize; /* Bytes 104-105 */
- struct {
- enum {
- DAC960_V1_Narrow_8bit = 0x0,
- DAC960_V1_Wide_16bit = 0x1,
- DAC960_V1_Wide_32bit = 0x2
- } __attribute__ ((packed)) BusWidth:2; /* Byte 106 Bits 0-1 */
- enum {
- DAC960_V1_Fast = 0x0,
- DAC960_V1_Ultra = 0x1,
- DAC960_V1_Ultra2 = 0x2
- } __attribute__ ((packed)) BusSpeed:2; /* Byte 106 Bits 2-3 */
- bool Differential:1; /* Byte 106 Bit 4 */
- unsigned char :3; /* Byte 106 Bits 5-7 */
- } SCSICapability;
- unsigned char :8; /* Byte 107 */
- unsigned int :32; /* Bytes 108-111 */
- unsigned short FirmwareBuildNumber; /* Bytes 112-113 */
- enum {
- DAC960_V1_AEMI = 0x01,
- DAC960_V1_OEM1 = 0x02,
- DAC960_V1_OEM2 = 0x04,
- DAC960_V1_OEM3 = 0x08,
- DAC960_V1_Conner = 0x10,
- DAC960_V1_SAFTE = 0x20
- } __attribute__ ((packed)) FaultManagementType; /* Byte 114 */
- unsigned char :8; /* Byte 115 */
- struct {
- bool Clustering:1; /* Byte 116 Bit 0 */
- bool MylexOnlineRAIDExpansion:1; /* Byte 116 Bit 1 */
- bool ReadAhead:1; /* Byte 116 Bit 2 */
- bool BackgroundInitialization:1; /* Byte 116 Bit 3 */
- unsigned int :28; /* Bytes 116-119 */
- } FirmwareFeatures;
- unsigned int :32; /* Bytes 120-123 */
- unsigned int :32; /* Bytes 124-127 */
-}
-DAC960_V1_Enquiry2_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive State type.
-*/
-
-typedef enum
-{
- DAC960_V1_LogicalDrive_Online = 0x03,
- DAC960_V1_LogicalDrive_Critical = 0x04,
- DAC960_V1_LogicalDrive_Offline = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V1_LogicalDriveState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive Information structure.
-*/
-
-typedef struct DAC960_V1_LogicalDriveInformation
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- DAC960_V1_LogicalDriveState_T LogicalDriveState; /* Byte 4 */
- unsigned char RAIDLevel:7; /* Byte 5 Bits 0-6 */
- bool WriteBack:1; /* Byte 5 Bit 7 */
- unsigned short :16; /* Bytes 6-7 */
-}
-DAC960_V1_LogicalDriveInformation_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Logical Drive Information Command
- reply structure.
-*/
-
-typedef DAC960_V1_LogicalDriveInformation_T
- DAC960_V1_LogicalDriveInformationArray_T[DAC960_MaxLogicalDrives];
-
-
-/*
- Define the DAC960 V1 Firmware Perform Event Log Operation Types.
-*/
-
-typedef enum
-{
- DAC960_V1_GetEventLogEntry = 0x00
-}
-__attribute__ ((packed))
-DAC960_V1_PerformEventLogOpType_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Event Log Entry Command reply structure.
-*/
-
-typedef struct DAC960_V1_EventLogEntry
-{
- unsigned char MessageType; /* Byte 0 */
- unsigned char MessageLength; /* Byte 1 */
- unsigned char TargetID:5; /* Byte 2 Bits 0-4 */
- unsigned char Channel:3; /* Byte 2 Bits 5-7 */
- unsigned char LogicalUnit:6; /* Byte 3 Bits 0-5 */
- unsigned char :2; /* Byte 3 Bits 6-7 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char ErrorCode:7; /* Byte 6 Bits 0-6 */
- bool Valid:1; /* Byte 6 Bit 7 */
- unsigned char SegmentNumber; /* Byte 7 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 8 Bits 0-3 */
- unsigned char :1; /* Byte 8 Bit 4 */
- bool ILI:1; /* Byte 8 Bit 5 */
- bool EOM:1; /* Byte 8 Bit 6 */
- bool Filemark:1; /* Byte 8 Bit 7 */
- unsigned char Information[4]; /* Bytes 9-12 */
- unsigned char AdditionalSenseLength; /* Byte 13 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 14-17 */
- unsigned char AdditionalSenseCode; /* Byte 18 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 19 */
- unsigned char Dummy[12]; /* Bytes 20-31 */
-}
-DAC960_V1_EventLogEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V1_Device_Dead = 0x00,
- DAC960_V1_Device_WriteOnly = 0x02,
- DAC960_V1_Device_Online = 0x03,
- DAC960_V1_Device_Standby = 0x10
-}
-__attribute__ ((packed))
-DAC960_V1_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Device State Command reply structure.
- The structure is padded by 2 bytes for compatibility with Version 2.xx
- Firmware.
-*/
-
-typedef struct DAC960_V1_DeviceState
-{
- bool Present:1; /* Byte 0 Bit 0 */
- unsigned char :7; /* Byte 0 Bits 1-7 */
- enum {
- DAC960_V1_OtherType = 0x0,
- DAC960_V1_DiskType = 0x1,
- DAC960_V1_SequentialType = 0x2,
- DAC960_V1_CDROM_or_WORM_Type = 0x3
- } __attribute__ ((packed)) DeviceType:2; /* Byte 1 Bits 0-1 */
- bool :1; /* Byte 1 Bit 2 */
- bool Fast20:1; /* Byte 1 Bit 3 */
- bool Sync:1; /* Byte 1 Bit 4 */
- bool Fast:1; /* Byte 1 Bit 5 */
- bool Wide:1; /* Byte 1 Bit 6 */
- bool TaggedQueuingSupported:1; /* Byte 1 Bit 7 */
- DAC960_V1_PhysicalDeviceState_T DeviceState; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned char SynchronousMultiplier; /* Byte 4 */
- unsigned char SynchronousOffset:5; /* Byte 5 Bits 0-4 */
- unsigned char :3; /* Byte 5 Bits 5-7 */
- unsigned int DiskSize __attribute__ ((packed)); /* Bytes 6-9 */
- unsigned short :16; /* Bytes 10-11 */
-}
-DAC960_V1_DeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
-*/
-
-typedef struct DAC960_V1_RebuildProgress
-{
- unsigned int LogicalDriveNumber; /* Bytes 0-3 */
- unsigned int LogicalDriveSize; /* Bytes 4-7 */
- unsigned int RemainingBlocks; /* Bytes 8-11 */
-}
-DAC960_V1_RebuildProgress_T;
-
-
-/*
- Define the DAC960 V1 Firmware Background Initialization Status Command
- reply structure.
-*/
-
-typedef struct DAC960_V1_BackgroundInitializationStatus
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- unsigned int BlocksCompleted; /* Bytes 4-7 */
- unsigned char Reserved1[12]; /* Bytes 8-19 */
- unsigned int LogicalDriveNumber; /* Bytes 20-23 */
- unsigned char RAIDLevel; /* Byte 24 */
- enum {
- DAC960_V1_BackgroundInitializationInvalid = 0x00,
- DAC960_V1_BackgroundInitializationStarted = 0x02,
- DAC960_V1_BackgroundInitializationInProgress = 0x04,
- DAC960_V1_BackgroundInitializationSuspended = 0x05,
- DAC960_V1_BackgroundInitializationCancelled = 0x06
- } __attribute__ ((packed)) Status; /* Byte 25 */
- unsigned char Reserved2[6]; /* Bytes 26-31 */
-}
-DAC960_V1_BackgroundInitializationStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Error Table Entry structure.
-*/
-
-typedef struct DAC960_V1_ErrorTableEntry
-{
- unsigned char ParityErrorCount; /* Byte 0 */
- unsigned char SoftErrorCount; /* Byte 1 */
- unsigned char HardErrorCount; /* Byte 2 */
- unsigned char MiscErrorCount; /* Byte 3 */
-}
-DAC960_V1_ErrorTableEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Error Table Command reply structure.
-*/
-
-typedef struct DAC960_V1_ErrorTable
-{
- DAC960_V1_ErrorTableEntry_T
- ErrorTableEntries[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
-}
-DAC960_V1_ErrorTable_T;
-
-
-/*
- Define the DAC960 V1 Firmware Read Config2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Config2
-{
- unsigned char :1; /* Byte 0 Bit 0 */
- bool ActiveNegationEnabled:1; /* Byte 0 Bit 1 */
- unsigned char :5; /* Byte 0 Bits 2-6 */
- bool NoRescanIfResetReceivedDuringScan:1; /* Byte 0 Bit 7 */
- bool StorageWorksSupportEnabled:1; /* Byte 1 Bit 0 */
- bool HewlettPackardSupportEnabled:1; /* Byte 1 Bit 1 */
- bool NoDisconnectOnFirstCommand:1; /* Byte 1 Bit 2 */
- unsigned char :2; /* Byte 1 Bits 3-4 */
- bool AEMI_ARM:1; /* Byte 1 Bit 5 */
- bool AEMI_OFM:1; /* Byte 1 Bit 6 */
- unsigned char :1; /* Byte 1 Bit 7 */
- enum {
- DAC960_V1_OEMID_Mylex = 0x00,
- DAC960_V1_OEMID_IBM = 0x08,
- DAC960_V1_OEMID_HP = 0x0A,
- DAC960_V1_OEMID_DEC = 0x0C,
- DAC960_V1_OEMID_Siemens = 0x10,
- DAC960_V1_OEMID_Intel = 0x12
- } __attribute__ ((packed)) OEMID; /* Byte 2 */
- unsigned char OEMModelNumber; /* Byte 3 */
- unsigned char PhysicalSector; /* Byte 4 */
- unsigned char LogicalSector; /* Byte 5 */
- unsigned char BlockFactor; /* Byte 6 */
- bool ReadAheadEnabled:1; /* Byte 7 Bit 0 */
- bool LowBIOSDelay:1; /* Byte 7 Bit 1 */
- unsigned char :2; /* Byte 7 Bits 2-3 */
- bool ReassignRestrictedToOneSector:1; /* Byte 7 Bit 4 */
- unsigned char :1; /* Byte 7 Bit 5 */
- bool ForceUnitAccessDuringWriteRecovery:1; /* Byte 7 Bit 6 */
- bool EnableLeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */
- unsigned char DefaultRebuildRate; /* Byte 8 */
- unsigned char :8; /* Byte 9 */
- unsigned char BlocksPerCacheLine; /* Byte 10 */
- unsigned char BlocksPerStripe; /* Byte 11 */
- struct {
- enum {
- DAC960_V1_Async = 0x0,
- DAC960_V1_Sync_8MHz = 0x1,
- DAC960_V1_Sync_5MHz = 0x2,
- DAC960_V1_Sync_10or20MHz = 0x3 /* Byte 11 Bits 0-1 */
- } __attribute__ ((packed)) Speed:2;
- bool Force8Bit:1; /* Byte 11 Bit 2 */
- bool DisableFast20:1; /* Byte 11 Bit 3 */
- unsigned char :3; /* Byte 11 Bits 4-6 */
- bool EnableTaggedQueuing:1; /* Byte 11 Bit 7 */
- } __attribute__ ((packed)) ChannelParameters[6]; /* Bytes 12-17 */
- unsigned char SCSIInitiatorID; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- enum {
- DAC960_V1_StartupMode_ControllerSpinUp = 0x00,
- DAC960_V1_StartupMode_PowerOnSpinUp = 0x01
- } __attribute__ ((packed)) StartupMode; /* Byte 20 */
- unsigned char SimultaneousDeviceSpinUpCount; /* Byte 21 */
- unsigned char SecondsDelayBetweenSpinUps; /* Byte 22 */
- unsigned char Reserved1[29]; /* Bytes 23-51 */
- bool BIOSDisabled:1; /* Byte 52 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 52 Bit 1 */
- unsigned char :3; /* Byte 52 Bits 2-4 */
- enum {
- DAC960_V1_Geometry_128_32 = 0x0,
- DAC960_V1_Geometry_255_63 = 0x1,
- DAC960_V1_Geometry_Reserved1 = 0x2,
- DAC960_V1_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 52 Bits 5-6 */
- unsigned char :1; /* Byte 52 Bit 7 */
- unsigned char Reserved2[9]; /* Bytes 53-61 */
- unsigned short Checksum; /* Bytes 62-63 */
-}
-DAC960_V1_Config2_T;
-
-
-/*
- Define the DAC960 V1 Firmware DCDB request structure.
-*/
-
-typedef struct DAC960_V1_DCDB
-{
- unsigned char TargetID:4; /* Byte 0 Bits 0-3 */
- unsigned char Channel:4; /* Byte 0 Bits 4-7 */
- enum {
- DAC960_V1_DCDB_NoDataTransfer = 0,
- DAC960_V1_DCDB_DataTransferDeviceToSystem = 1,
- DAC960_V1_DCDB_DataTransferSystemToDevice = 2,
- DAC960_V1_DCDB_IllegalDataTransfer = 3
- } __attribute__ ((packed)) Direction:2; /* Byte 1 Bits 0-1 */
- bool EarlyStatus:1; /* Byte 1 Bit 2 */
- unsigned char :1; /* Byte 1 Bit 3 */
- enum {
- DAC960_V1_DCDB_Timeout_24_hours = 0,
- DAC960_V1_DCDB_Timeout_10_seconds = 1,
- DAC960_V1_DCDB_Timeout_60_seconds = 2,
- DAC960_V1_DCDB_Timeout_10_minutes = 3
- } __attribute__ ((packed)) Timeout:2; /* Byte 1 Bits 4-5 */
- bool NoAutomaticRequestSense:1; /* Byte 1 Bit 6 */
- bool DisconnectPermitted:1; /* Byte 1 Bit 7 */
- unsigned short TransferLength; /* Bytes 2-3 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 4-7 */
- unsigned char CDBLength:4; /* Byte 8 Bits 0-3 */
- unsigned char TransferLengthHigh4:4; /* Byte 8 Bits 4-7 */
- unsigned char SenseLength; /* Byte 9 */
- unsigned char CDB[12]; /* Bytes 10-21 */
- unsigned char SenseData[64]; /* Bytes 22-85 */
- unsigned char Status; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
-}
-DAC960_V1_DCDB_T;
-
-
-/*
- Define the DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
- 32 Bit Byte Count structure.
-*/
-
-typedef struct DAC960_V1_ScatterGatherSegment
-{
- DAC960_BusAddress32_T SegmentDataPointer; /* Bytes 0-3 */
- DAC960_ByteCount32_T SegmentByteCount; /* Bytes 4-7 */
-}
-DAC960_V1_ScatterGatherSegment_T;
-
-
-/*
- Define the 13 Byte DAC960 V1 Firmware Command Mailbox structure. Bytes 13-15
- are not used. The Command Mailbox structure is padded to 16 bytes for
- efficient access.
-*/
-
-typedef union DAC960_V1_CommandMailbox
-{
- unsigned int Words[4]; /* Words 0-3 */
- unsigned char Bytes[16]; /* Bytes 0-15 */
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy[14]; /* Bytes 2-15 */
- } __attribute__ ((packed)) Common;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[6]; /* Bytes 2-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char Dummy1[5]; /* Bytes 3-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3B;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[5]; /* Bytes 2-6 */
- unsigned char LogicalDriveNumber:6; /* Byte 7 Bits 0-6 */
- bool AutoRestore:1; /* Byte 7 Bit 7 */
- unsigned char Dummy2[8]; /* Bytes 8-15 */
- } __attribute__ ((packed)) Type3C;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Channel; /* Byte 2 */
- unsigned char TargetID; /* Byte 3 */
- DAC960_V1_PhysicalDeviceState_T DeviceState:5; /* Byte 4 Bits 0-4 */
- unsigned char Modifier:3; /* Byte 4 Bits 5-7 */
- unsigned char Dummy1[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3D;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- DAC960_V1_PerformEventLogOpType_T OperationType; /* Byte 2 */
- unsigned char OperationQualifier; /* Byte 3 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char Dummy1[2]; /* Bytes 6-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3E;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[2]; /* Bytes 2-3 */
- unsigned char RebuildRateConstant; /* Byte 4 */
- unsigned char Dummy2[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy3[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3R;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned short TransferLength; /* Bytes 2-3 */
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char LogicalDriveNumber; /* Byte 12 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type4;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- struct {
- unsigned short TransferLength:11; /* Bytes 2-3 */
- unsigned char LogicalDriveNumber:5; /* Byte 3 Bits 3-7 */
- } __attribute__ ((packed)) LD;
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char ScatterGatherCount:6; /* Byte 12 Bits 0-5 */
- enum {
- DAC960_V1_ScatterGather_32BitAddress_32BitByteCount = 0x0,
- DAC960_V1_ScatterGather_32BitAddress_16BitByteCount = 0x1,
- DAC960_V1_ScatterGather_32BitByteCount_32BitAddress = 0x2,
- DAC960_V1_ScatterGather_16BitByteCount_32BitAddress = 0x3
- } __attribute__ ((packed)) ScatterGatherType:2; /* Byte 12 Bits 6-7 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type5;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- DAC960_BusAddress32_T CommandMailboxesBusAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T StatusMailboxesBusAddress; /* Bytes 8-11 */
- unsigned char Dummy[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) TypeX;
-}
-DAC960_V1_CommandMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_MemCopy = 0x01,
- DAC960_V2_SCSI_10_Passthru = 0x02,
- DAC960_V2_SCSI_255_Passthru = 0x03,
- DAC960_V2_SCSI_10 = 0x04,
- DAC960_V2_SCSI_256 = 0x05,
- DAC960_V2_IOCTL = 0x20
-}
-__attribute__ ((packed))
-DAC960_V2_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware IOCTL Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_GetControllerInfo = 0x01,
- DAC960_V2_GetLogicalDeviceInfoValid = 0x03,
- DAC960_V2_GetPhysicalDeviceInfoValid = 0x05,
- DAC960_V2_GetHealthStatus = 0x11,
- DAC960_V2_GetEvent = 0x15,
- DAC960_V2_StartDiscovery = 0x81,
- DAC960_V2_SetDeviceState = 0x82,
- DAC960_V2_RebuildDeviceStart = 0x88,
- DAC960_V2_RebuildDeviceStop = 0x89,
- DAC960_V2_ConsistencyCheckStart = 0x8C,
- DAC960_V2_ConsistencyCheckStop = 0x8D,
- DAC960_V2_SetMemoryMailbox = 0x8E,
- DAC960_V2_PauseDevice = 0x92,
- DAC960_V2_TranslatePhysicalToLogicalDevice = 0xC5
-}
-__attribute__ ((packed))
-DAC960_V2_IOCTL_Opcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Identifier type.
-*/
-
-typedef unsigned short DAC960_V2_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Status Codes.
-*/
-
-#define DAC960_V2_NormalCompletion 0x00
-#define DAC960_V2_AbormalCompletion 0x02
-#define DAC960_V2_DeviceBusy 0x08
-#define DAC960_V2_DeviceNonresponsive 0x0E
-#define DAC960_V2_DeviceNonresponsive2 0x0F
-#define DAC960_V2_DeviceRevervationConflict 0x18
-
-typedef unsigned char DAC960_V2_CommandStatus_T;
-
-
-/*
- Define the DAC960 V2 Firmware Memory Type structure.
-*/
-
-typedef struct DAC960_V2_MemoryType
-{
- enum {
- DAC960_V2_MemoryType_Reserved = 0x00,
- DAC960_V2_MemoryType_DRAM = 0x01,
- DAC960_V2_MemoryType_EDRAM = 0x02,
- DAC960_V2_MemoryType_EDO = 0x03,
- DAC960_V2_MemoryType_SDRAM = 0x04,
- DAC960_V2_MemoryType_Last = 0x1F
- } __attribute__ ((packed)) MemoryType:5; /* Byte 0 Bits 0-4 */
- bool :1; /* Byte 0 Bit 5 */
- bool MemoryParity:1; /* Byte 0 Bit 6 */
- bool MemoryECC:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_MemoryType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Processor Type structure.
-*/
-
-typedef enum
-{
- DAC960_V2_ProcessorType_i960CA = 0x01,
- DAC960_V2_ProcessorType_i960RD = 0x02,
- DAC960_V2_ProcessorType_i960RN = 0x03,
- DAC960_V2_ProcessorType_i960RP = 0x04,
- DAC960_V2_ProcessorType_NorthBay = 0x05,
- DAC960_V2_ProcessorType_StrongArm = 0x06,
- DAC960_V2_ProcessorType_i960RM = 0x07
-}
-__attribute__ ((packed))
-DAC960_V2_ProcessorType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Controller Info reply structure.
-*/
-
-typedef struct DAC960_V2_ControllerInfo
-{
- unsigned char :8; /* Byte 0 */
- enum {
- DAC960_V2_SCSI_Bus = 0x00,
- DAC960_V2_Fibre_Bus = 0x01,
- DAC960_V2_PCI_Bus = 0x03
- } __attribute__ ((packed)) BusInterfaceType; /* Byte 1 */
- enum {
- DAC960_V2_DAC960E = 0x01,
- DAC960_V2_DAC960M = 0x08,
- DAC960_V2_DAC960PD = 0x10,
- DAC960_V2_DAC960PL = 0x11,
- DAC960_V2_DAC960PU = 0x12,
- DAC960_V2_DAC960PE = 0x13,
- DAC960_V2_DAC960PG = 0x14,
- DAC960_V2_DAC960PJ = 0x15,
- DAC960_V2_DAC960PTL0 = 0x16,
- DAC960_V2_DAC960PR = 0x17,
- DAC960_V2_DAC960PRL = 0x18,
- DAC960_V2_DAC960PT = 0x19,
- DAC960_V2_DAC1164P = 0x1A,
- DAC960_V2_DAC960PTL1 = 0x1B,
- DAC960_V2_EXR2000P = 0x1C,
- DAC960_V2_EXR3000P = 0x1D,
- DAC960_V2_AcceleRAID352 = 0x1E,
- DAC960_V2_AcceleRAID170 = 0x1F,
- DAC960_V2_AcceleRAID160 = 0x20,
- DAC960_V2_DAC960S = 0x60,
- DAC960_V2_DAC960SU = 0x61,
- DAC960_V2_DAC960SX = 0x62,
- DAC960_V2_DAC960SF = 0x63,
- DAC960_V2_DAC960SS = 0x64,
- DAC960_V2_DAC960FL = 0x65,
- DAC960_V2_DAC960LL = 0x66,
- DAC960_V2_DAC960FF = 0x67,
- DAC960_V2_DAC960HP = 0x68,
- DAC960_V2_RAIDBRICK = 0x69,
- DAC960_V2_METEOR_FL = 0x6A,
- DAC960_V2_METEOR_FF = 0x6B
- } __attribute__ ((packed)) ControllerType; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned short BusInterfaceSpeedMHz; /* Bytes 4-5 */
- unsigned char BusWidthBits; /* Byte 6 */
- unsigned char FlashCodeTypeOrProductID; /* Byte 7 */
- unsigned char NumberOfHostPortsPresent; /* Byte 8 */
- unsigned char Reserved1[7]; /* Bytes 9-15 */
- unsigned char BusInterfaceName[16]; /* Bytes 16-31 */
- unsigned char ControllerName[16]; /* Bytes 32-47 */
- unsigned char Reserved2[16]; /* Bytes 48-63 */
- /* Firmware Release Information */
- unsigned char FirmwareMajorVersion; /* Byte 64 */
- unsigned char FirmwareMinorVersion; /* Byte 65 */
- unsigned char FirmwareTurnNumber; /* Byte 66 */
- unsigned char FirmwareBuildNumber; /* Byte 67 */
- unsigned char FirmwareReleaseDay; /* Byte 68 */
- unsigned char FirmwareReleaseMonth; /* Byte 69 */
- unsigned char FirmwareReleaseYearHigh2Digits; /* Byte 70 */
- unsigned char FirmwareReleaseYearLow2Digits; /* Byte 71 */
- /* Hardware Release Information */
- unsigned char HardwareRevision; /* Byte 72 */
- unsigned int :24; /* Bytes 73-75 */
- unsigned char HardwareReleaseDay; /* Byte 76 */
- unsigned char HardwareReleaseMonth; /* Byte 77 */
- unsigned char HardwareReleaseYearHigh2Digits; /* Byte 78 */
- unsigned char HardwareReleaseYearLow2Digits; /* Byte 79 */
- /* Hardware Manufacturing Information */
- unsigned char ManufacturingBatchNumber; /* Byte 80 */
- unsigned char :8; /* Byte 81 */
- unsigned char ManufacturingPlantNumber; /* Byte 82 */
- unsigned char :8; /* Byte 83 */
- unsigned char HardwareManufacturingDay; /* Byte 84 */
- unsigned char HardwareManufacturingMonth; /* Byte 85 */
- unsigned char HardwareManufacturingYearHigh2Digits; /* Byte 86 */
- unsigned char HardwareManufacturingYearLow2Digits; /* Byte 87 */
- unsigned char MaximumNumberOfPDDperXLD; /* Byte 88 */
- unsigned char MaximumNumberOfILDperXLD; /* Byte 89 */
- unsigned short NonvolatileMemorySizeKB; /* Bytes 90-91 */
- unsigned char MaximumNumberOfXLD; /* Byte 92 */
- unsigned int :24; /* Bytes 93-95 */
- /* Unique Information per Controller */
- unsigned char ControllerSerialNumber[16]; /* Bytes 96-111 */
- unsigned char Reserved3[16]; /* Bytes 112-127 */
- /* Vendor Information */
- unsigned int :24; /* Bytes 128-130 */
- unsigned char OEM_Code; /* Byte 131 */
- unsigned char VendorName[16]; /* Bytes 132-147 */
- /* Other Physical/Controller/Operation Information */
- bool BBU_Present:1; /* Byte 148 Bit 0 */
- bool ActiveActiveClusteringMode:1; /* Byte 148 Bit 1 */
- unsigned char :6; /* Byte 148 Bits 2-7 */
- unsigned char :8; /* Byte 149 */
- unsigned short :16; /* Bytes 150-151 */
- /* Physical Device Scan Information */
- bool PhysicalScanActive:1; /* Byte 152 Bit 0 */
- unsigned char :7; /* Byte 152 Bits 1-7 */
- unsigned char PhysicalDeviceChannelNumber; /* Byte 153 */
- unsigned char PhysicalDeviceTargetID; /* Byte 154 */
- unsigned char PhysicalDeviceLogicalUnit; /* Byte 155 */
- /* Maximum Command Data Transfer Sizes */
- unsigned short MaximumDataTransferSizeInBlocks; /* Bytes 156-157 */
- unsigned short MaximumScatterGatherEntries; /* Bytes 158-159 */
- /* Logical/Physical Device Counts */
- unsigned short LogicalDevicesPresent; /* Bytes 160-161 */
- unsigned short LogicalDevicesCritical; /* Bytes 162-163 */
- unsigned short LogicalDevicesOffline; /* Bytes 164-165 */
- unsigned short PhysicalDevicesPresent; /* Bytes 166-167 */
- unsigned short PhysicalDisksPresent; /* Bytes 168-169 */
- unsigned short PhysicalDisksCritical; /* Bytes 170-171 */
- unsigned short PhysicalDisksOffline; /* Bytes 172-173 */
- unsigned short MaximumParallelCommands; /* Bytes 174-175 */
- /* Channel and Target ID Information */
- unsigned char NumberOfPhysicalChannelsPresent; /* Byte 176 */
- unsigned char NumberOfVirtualChannelsPresent; /* Byte 177 */
- unsigned char NumberOfPhysicalChannelsPossible; /* Byte 178 */
- unsigned char NumberOfVirtualChannelsPossible; /* Byte 179 */
- unsigned char MaximumTargetsPerChannel[16]; /* Bytes 180-195 */
- unsigned char Reserved4[12]; /* Bytes 196-207 */
- /* Memory/Cache Information */
- unsigned short MemorySizeMB; /* Bytes 208-209 */
- unsigned short CacheSizeMB; /* Bytes 210-211 */
- unsigned int ValidCacheSizeInBytes; /* Bytes 212-215 */
- unsigned int DirtyCacheSizeInBytes; /* Bytes 216-219 */
- unsigned short MemorySpeedMHz; /* Bytes 220-221 */
- unsigned char MemoryDataWidthBits; /* Byte 222 */
- DAC960_V2_MemoryType_T MemoryType; /* Byte 223 */
- unsigned char CacheMemoryTypeName[16]; /* Bytes 224-239 */
- /* Execution Memory Information */
- unsigned short ExecutionMemorySizeMB; /* Bytes 240-241 */
- unsigned short ExecutionL2CacheSizeMB; /* Bytes 242-243 */
- unsigned char Reserved5[8]; /* Bytes 244-251 */
- unsigned short ExecutionMemorySpeedMHz; /* Bytes 252-253 */
- unsigned char ExecutionMemoryDataWidthBits; /* Byte 254 */
- DAC960_V2_MemoryType_T ExecutionMemoryType; /* Byte 255 */
- unsigned char ExecutionMemoryTypeName[16]; /* Bytes 256-271 */
- /* First CPU Type Information */
- unsigned short FirstProcessorSpeedMHz; /* Bytes 272-273 */
- DAC960_V2_ProcessorType_T FirstProcessorType; /* Byte 274 */
- unsigned char FirstProcessorCount; /* Byte 275 */
- unsigned char Reserved6[12]; /* Bytes 276-287 */
- unsigned char FirstProcessorName[16]; /* Bytes 288-303 */
- /* Second CPU Type Information */
- unsigned short SecondProcessorSpeedMHz; /* Bytes 304-305 */
- DAC960_V2_ProcessorType_T SecondProcessorType; /* Byte 306 */
- unsigned char SecondProcessorCount; /* Byte 307 */
- unsigned char Reserved7[12]; /* Bytes 308-319 */
- unsigned char SecondProcessorName[16]; /* Bytes 320-335 */
- /* Debugging/Profiling/Command Time Tracing Information */
- unsigned short CurrentProfilingDataPageNumber; /* Bytes 336-337 */
- unsigned short ProgramsAwaitingProfilingData; /* Bytes 338-339 */
- unsigned short CurrentCommandTimeTraceDataPageNumber; /* Bytes 340-341 */
- unsigned short ProgramsAwaitingCommandTimeTraceData; /* Bytes 342-343 */
- unsigned char Reserved8[8]; /* Bytes 344-351 */
- /* Error Counters on Physical Devices */
- unsigned short PhysicalDeviceBusResets; /* Bytes 352-353 */
- unsigned short PhysicalDeviceParityErrors; /* Bytes 355-355 */
- unsigned short PhysicalDeviceSoftErrors; /* Bytes 356-357 */
- unsigned short PhysicalDeviceCommandsFailed; /* Bytes 358-359 */
- unsigned short PhysicalDeviceMiscellaneousErrors; /* Bytes 360-361 */
- unsigned short PhysicalDeviceCommandTimeouts; /* Bytes 362-363 */
- unsigned short PhysicalDeviceSelectionTimeouts; /* Bytes 364-365 */
- unsigned short PhysicalDeviceRetriesDone; /* Bytes 366-367 */
- unsigned short PhysicalDeviceAbortsDone; /* Bytes 368-369 */
- unsigned short PhysicalDeviceHostCommandAbortsDone; /* Bytes 370-371 */
- unsigned short PhysicalDevicePredictedFailuresDetected; /* Bytes 372-373 */
- unsigned short PhysicalDeviceHostCommandsFailed; /* Bytes 374-375 */
- unsigned short PhysicalDeviceHardErrors; /* Bytes 376-377 */
- unsigned char Reserved9[6]; /* Bytes 378-383 */
- /* Error Counters on Logical Devices */
- unsigned short LogicalDeviceSoftErrors; /* Bytes 384-385 */
- unsigned short LogicalDeviceCommandsFailed; /* Bytes 386-387 */
- unsigned short LogicalDeviceHostCommandAbortsDone; /* Bytes 388-389 */
- unsigned short :16; /* Bytes 390-391 */
- /* Error Counters on Controller */
- unsigned short ControllerMemoryErrors; /* Bytes 392-393 */
- unsigned short ControllerHostCommandAbortsDone; /* Bytes 394-395 */
- unsigned int :32; /* Bytes 396-399 */
- /* Long Duration Activity Information */
- unsigned short BackgroundInitializationsActive; /* Bytes 400-401 */
- unsigned short LogicalDeviceInitializationsActive; /* Bytes 402-403 */
- unsigned short PhysicalDeviceInitializationsActive; /* Bytes 404-405 */
- unsigned short ConsistencyChecksActive; /* Bytes 406-407 */
- unsigned short RebuildsActive; /* Bytes 408-409 */
- unsigned short OnlineExpansionsActive; /* Bytes 410-411 */
- unsigned short PatrolActivitiesActive; /* Bytes 412-413 */
- unsigned short :16; /* Bytes 414-415 */
- /* Flash ROM Information */
- unsigned char FlashType; /* Byte 416 */
- unsigned char :8; /* Byte 417 */
- unsigned short FlashSizeMB; /* Bytes 418-419 */
- unsigned int FlashLimit; /* Bytes 420-423 */
- unsigned int FlashCount; /* Bytes 424-427 */
- unsigned int :32; /* Bytes 428-431 */
- unsigned char FlashTypeName[16]; /* Bytes 432-447 */
- /* Firmware Run Time Information */
- unsigned char RebuildRate; /* Byte 448 */
- unsigned char BackgroundInitializationRate; /* Byte 449 */
- unsigned char ForegroundInitializationRate; /* Byte 450 */
- unsigned char ConsistencyCheckRate; /* Byte 451 */
- unsigned int :32; /* Bytes 452-455 */
- unsigned int MaximumDP; /* Bytes 456-459 */
- unsigned int FreeDP; /* Bytes 460-463 */
- unsigned int MaximumIOP; /* Bytes 464-467 */
- unsigned int FreeIOP; /* Bytes 468-471 */
- unsigned short MaximumCombLengthInBlocks; /* Bytes 472-473 */
- unsigned short NumberOfConfigurationGroups; /* Bytes 474-475 */
- bool InstallationAbortStatus:1; /* Byte 476 Bit 0 */
- bool MaintenanceModeStatus:1; /* Byte 476 Bit 1 */
- unsigned int :24; /* Bytes 476-479 */
- unsigned char Reserved10[32]; /* Bytes 480-511 */
- unsigned char Reserved11[512]; /* Bytes 512-1023 */
-}
-DAC960_V2_ControllerInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_LogicalDevice_Online = 0x01,
- DAC960_V2_LogicalDevice_Offline = 0x08,
- DAC960_V2_LogicalDevice_Critical = 0x09
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Logical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_LogicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState; /* Byte 4 */
- unsigned char RAIDLevel; /* Byte 5 */
- unsigned char StripeSize; /* Byte 6 */
- unsigned char CacheLineSize; /* Byte 7 */
- struct {
- enum {
- DAC960_V2_ReadCacheDisabled = 0x0,
- DAC960_V2_ReadCacheEnabled = 0x1,
- DAC960_V2_ReadAheadEnabled = 0x2,
- DAC960_V2_IntelligentReadAheadEnabled = 0x3,
- DAC960_V2_ReadCache_Last = 0x7
- } __attribute__ ((packed)) ReadCache:3; /* Byte 8 Bits 0-2 */
- enum {
- DAC960_V2_WriteCacheDisabled = 0x0,
- DAC960_V2_LogicalDeviceReadOnly = 0x1,
- DAC960_V2_WriteCacheEnabled = 0x2,
- DAC960_V2_IntelligentWriteCacheEnabled = 0x3,
- DAC960_V2_WriteCache_Last = 0x7
- } __attribute__ ((packed)) WriteCache:3; /* Byte 8 Bits 3-5 */
- bool :1; /* Byte 8 Bit 6 */
- bool LogicalDeviceInitialized:1; /* Byte 8 Bit 7 */
- } LogicalDeviceControl; /* Byte 8 */
- /* Logical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 9 Bit 0 */
- bool RebuildInProgress:1; /* Byte 9 Bit 1 */
- bool BackgroundInitializationInProgress:1; /* Byte 9 Bit 2 */
- bool ForegroundInitializationInProgress:1; /* Byte 9 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 9 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 9 Bit 5 */
- unsigned char :2; /* Byte 9 Bits 6-7 */
- unsigned char RAID5WriteUpdate; /* Byte 10 */
- unsigned char RAID5Algorithm; /* Byte 11 */
- unsigned short LogicalDeviceNumber; /* Bytes 12-13 */
- /* BIOS Info */
- bool BIOSDisabled:1; /* Byte 14 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 14 Bit 1 */
- bool DriveCoercionEnabled:1; /* Byte 14 Bit 2 */
- bool WriteSameDisabled:1; /* Byte 14 Bit 3 */
- bool HBA_ModeEnabled:1; /* Byte 14 Bit 4 */
- enum {
- DAC960_V2_Geometry_128_32 = 0x0,
- DAC960_V2_Geometry_255_63 = 0x1,
- DAC960_V2_Geometry_Reserved1 = 0x2,
- DAC960_V2_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 14 Bits 5-6 */
- bool SuperReadAheadEnabled:1; /* Byte 14 Bit 7 */
- unsigned char :8; /* Byte 15 */
- /* Error Counters */
- unsigned short SoftErrors; /* Bytes 16-17 */
- unsigned short CommandsFailed; /* Bytes 18-19 */
- unsigned short HostCommandAbortsDone; /* Bytes 20-21 */
- unsigned short DeferredWriteErrors; /* Bytes 22-23 */
- unsigned int :32; /* Bytes 24-27 */
- unsigned int :32; /* Bytes 28-31 */
- /* Device Size Information */
- unsigned short :16; /* Bytes 32-33 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 34-35 */
- unsigned int OriginalDeviceSize; /* Bytes 36-39 */
- unsigned int ConfigurableDeviceSize; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char LogicalDeviceName[32]; /* Bytes 48-79 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 80-115 */
- unsigned char Reserved1[12]; /* Bytes 116-127 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 128-135 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 136-143 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 144-151 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 152-159 */
- DAC960_ByteCount64_T BackgroundInitializationBlockNumber; /* Bytes 160-167 */
- DAC960_ByteCount64_T ForegroundInitializationBlockNumber; /* Bytes 168-175 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 176-183 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 184-191 */
- unsigned char Reserved2[64]; /* Bytes 192-255 */
-}
-DAC960_V2_LogicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_Device_Unconfigured = 0x00,
- DAC960_V2_Device_Online = 0x01,
- DAC960_V2_Device_Rebuild = 0x03,
- DAC960_V2_Device_Missing = 0x04,
- DAC960_V2_Device_Critical = 0x05,
- DAC960_V2_Device_Dead = 0x08,
- DAC960_V2_Device_SuspectedDead = 0x0C,
- DAC960_V2_Device_CommandedOffline = 0x10,
- DAC960_V2_Device_Standby = 0x21,
- DAC960_V2_Device_InvalidState = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Physical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- /* Configuration Status Bits */
- bool PhysicalDeviceFaultTolerant:1; /* Byte 4 Bit 0 */
- bool PhysicalDeviceConnected:1; /* Byte 4 Bit 1 */
- bool PhysicalDeviceLocalToController:1; /* Byte 4 Bit 2 */
- unsigned char :5; /* Byte 4 Bits 3-7 */
- /* Multiple Host/Controller Status Bits */
- bool RemoteHostSystemDead:1; /* Byte 5 Bit 0 */
- bool RemoteControllerDead:1; /* Byte 5 Bit 1 */
- unsigned char :6; /* Byte 5 Bits 2-7 */
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; /* Byte 6 */
- unsigned char NegotiatedDataWidthBits; /* Byte 7 */
- unsigned short NegotiatedSynchronousMegaTransfers; /* Bytes 8-9 */
- /* Multiported Physical Device Information */
- unsigned char NumberOfPortConnections; /* Byte 10 */
- unsigned char DriveAccessibilityBitmap; /* Byte 11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned char NetworkAddress[16]; /* Bytes 16-31 */
- unsigned short MaximumTags; /* Bytes 32-33 */
- /* Physical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 34 Bit 0 */
- bool RebuildInProgress:1; /* Byte 34 Bit 1 */
- bool MakingDataConsistentInProgress:1; /* Byte 34 Bit 2 */
- bool PhysicalDeviceInitializationInProgress:1; /* Byte 34 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 34 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 34 Bit 5 */
- unsigned char :2; /* Byte 34 Bits 6-7 */
- unsigned char LongOperationStatus; /* Byte 35 */
- unsigned char ParityErrors; /* Byte 36 */
- unsigned char SoftErrors; /* Byte 37 */
- unsigned char HardErrors; /* Byte 38 */
- unsigned char MiscellaneousErrors; /* Byte 39 */
- unsigned char CommandTimeouts; /* Byte 40 */
- unsigned char Retries; /* Byte 41 */
- unsigned char Aborts; /* Byte 42 */
- unsigned char PredictedFailuresDetected; /* Byte 43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned short :16; /* Bytes 48-49 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 50-51 */
- unsigned int OriginalDeviceSize; /* Bytes 52-55 */
- unsigned int ConfigurableDeviceSize; /* Bytes 56-59 */
- unsigned int :32; /* Bytes 60-63 */
- unsigned char PhysicalDeviceName[16]; /* Bytes 64-79 */
- unsigned char Reserved1[16]; /* Bytes 80-95 */
- unsigned char Reserved2[32]; /* Bytes 96-127 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 128-163 */
- unsigned char Reserved3[20]; /* Bytes 164-183 */
- unsigned char Reserved4[8]; /* Bytes 184-191 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 192-199 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 200-207 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 208-215 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 216-223 */
- DAC960_ByteCount64_T MakingDataConsistentBlockNumber; /* Bytes 224-231 */
- DAC960_ByteCount64_T DeviceInitializationBlockNumber; /* Bytes 232-239 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 240-247 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 248-255 */
- unsigned char Reserved5[256]; /* Bytes 256-511 */
-}
-DAC960_V2_PhysicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Health Status Buffer structure.
-*/
-
-typedef struct DAC960_V2_HealthStatusBuffer
-{
- unsigned int MicrosecondsFromControllerStartTime; /* Bytes 0-3 */
- unsigned int MillisecondsFromControllerStartTime; /* Bytes 4-7 */
- unsigned int SecondsFrom1January1970; /* Bytes 8-11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned int StatusChangeCounter; /* Bytes 16-19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int DebugOutputMessageBufferIndex; /* Bytes 24-27 */
- unsigned int CodedMessageBufferIndex; /* Bytes 28-31 */
- unsigned int CurrentTimeTracePageNumber; /* Bytes 32-35 */
- unsigned int CurrentProfilerPageNumber; /* Bytes 36-39 */
- unsigned int NextEventSequenceNumber; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char Reserved1[16]; /* Bytes 48-63 */
- unsigned char Reserved2[64]; /* Bytes 64-127 */
-}
-DAC960_V2_HealthStatusBuffer_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Event reply structure.
-*/
-
-typedef struct DAC960_V2_Event
-{
- unsigned int EventSequenceNumber; /* Bytes 0-3 */
- unsigned int EventTime; /* Bytes 4-7 */
- unsigned int EventCode; /* Bytes 8-11 */
- unsigned char :8; /* Byte 12 */
- unsigned char Channel; /* Byte 13 */
- unsigned char TargetID; /* Byte 14 */
- unsigned char LogicalUnit; /* Byte 15 */
- unsigned int :32; /* Bytes 16-19 */
- unsigned int EventSpecificParameter; /* Bytes 20-23 */
- unsigned char RequestSenseData[40]; /* Bytes 24-63 */
-}
-DAC960_V2_Event_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Control Bits structure.
-*/
-
-typedef struct DAC960_V2_CommandControlBits
-{
- bool ForceUnitAccess:1; /* Byte 0 Bit 0 */
- bool DisablePageOut:1; /* Byte 0 Bit 1 */
- bool :1; /* Byte 0 Bit 2 */
- bool AdditionalScatterGatherListMemory:1; /* Byte 0 Bit 3 */
- bool DataTransferControllerToHost:1; /* Byte 0 Bit 4 */
- bool :1; /* Byte 0 Bit 5 */
- bool NoAutoRequestSense:1; /* Byte 0 Bit 6 */
- bool DisconnectProhibited:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_CommandControlBits_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Timeout structure.
-*/
-
-typedef struct DAC960_V2_CommandTimeout
-{
- unsigned char TimeoutValue:6; /* Byte 0 Bits 0-5 */
- enum {
- DAC960_V2_TimeoutScale_Seconds = 0,
- DAC960_V2_TimeoutScale_Minutes = 1,
- DAC960_V2_TimeoutScale_Hours = 2,
- DAC960_V2_TimeoutScale_Reserved = 3
- } __attribute__ ((packed)) TimeoutScale:2; /* Byte 0 Bits 6-7 */
-}
-DAC960_V2_CommandTimeout_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDevice
-{
- unsigned char LogicalUnit; /* Byte 0 */
- unsigned char TargetID; /* Byte 1 */
- unsigned char Channel:3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device structure.
-*/
-
-typedef struct DAC960_V2_LogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned char :3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Operation Device type.
-*/
-
-typedef enum
-{
- DAC960_V2_Physical_Device = 0x00,
- DAC960_V2_RAID_Device = 0x01,
- DAC960_V2_Physical_Channel = 0x02,
- DAC960_V2_RAID_Channel = 0x03,
- DAC960_V2_Physical_Controller = 0x04,
- DAC960_V2_RAID_Controller = 0x05,
- DAC960_V2_Configuration_Group = 0x10,
- DAC960_V2_Enclosure = 0x11
-}
-__attribute__ ((packed))
-DAC960_V2_OperationDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Translate Physical To Logical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalToLogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned short :16; /* Bytes 2-3 */
- unsigned char PreviousBootController; /* Byte 4 */
- unsigned char PreviousBootChannel; /* Byte 5 */
- unsigned char PreviousBootTargetID; /* Byte 6 */
- unsigned char PreviousBootLogicalUnit; /* Byte 7 */
-}
-DAC960_V2_PhysicalToLogicalDevice_T;
-
-
-
-/*
- Define the DAC960 V2 Firmware Scatter/Gather List Entry structure.
-*/
-
-typedef struct DAC960_V2_ScatterGatherSegment
-{
- DAC960_BusAddress64_T SegmentDataPointer; /* Bytes 0-7 */
- DAC960_ByteCount64_T SegmentByteCount; /* Bytes 8-15 */
-}
-DAC960_V2_ScatterGatherSegment_T;
-
-
-/*
- Define the DAC960 V2 Firmware Data Transfer Memory Address structure.
-*/
-
-typedef union DAC960_V2_DataTransferMemoryAddress
-{
- DAC960_V2_ScatterGatherSegment_T ScatterGatherSegments[2]; /* Bytes 0-31 */
- struct {
- unsigned short ScatterGatherList0Length; /* Bytes 0-1 */
- unsigned short ScatterGatherList1Length; /* Bytes 2-3 */
- unsigned short ScatterGatherList2Length; /* Bytes 4-5 */
- unsigned short :16; /* Bytes 6-7 */
- DAC960_BusAddress64_T ScatterGatherList0Address; /* Bytes 8-15 */
- DAC960_BusAddress64_T ScatterGatherList1Address; /* Bytes 16-23 */
- DAC960_BusAddress64_T ScatterGatherList2Address; /* Bytes 24-31 */
- } ExtendedScatterGather;
-}
-DAC960_V2_DataTransferMemoryAddress_T;
-
-
-/*
- Define the 64 Byte DAC960 V2 Firmware Command Mailbox structure.
-*/
-
-typedef union DAC960_V2_CommandMailbox
-{
- unsigned int Words[16]; /* Words 0-15 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } Common;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned char SCSI_CDB[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_10;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned short :16; /* Bytes 22-23 */
- DAC960_BusAddress64_T SCSI_CDB_BusAddress; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_255;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short :16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ControllerInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } LogicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } PhysicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short EventSequenceNumberHigh16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned short EventSequenceNumberLow16; /* Bytes 22-23 */
- unsigned char Reserved[8]; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } GetEvent;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- union {
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState;
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState;
- } DeviceState; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SetDeviceState;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- bool RestoreConsistency:1; /* Byte 22 Bit 0 */
- bool InitializedAreaOnly:1; /* Byte 22 Bit 1 */
- unsigned char :6; /* Byte 22 Bits 2-7 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ConsistencyCheck;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- unsigned char FirstCommandMailboxSizeKB; /* Byte 4 */
- unsigned char FirstStatusMailboxSizeKB; /* Byte 5 */
- unsigned char SecondCommandMailboxSizeKB; /* Byte 6 */
- unsigned char SecondStatusMailboxSizeKB; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char HealthStatusBufferSizeKB; /* Byte 22 */
- unsigned char :8; /* Byte 23 */
- DAC960_BusAddress64_T HealthStatusBufferBusAddress; /* Bytes 24-31 */
- DAC960_BusAddress64_T FirstCommandMailboxBusAddress; /* Bytes 32-39 */
- DAC960_BusAddress64_T FirstStatusMailboxBusAddress; /* Bytes 40-47 */
- DAC960_BusAddress64_T SecondCommandMailboxBusAddress; /* Bytes 48-55 */
- DAC960_BusAddress64_T SecondStatusMailboxBusAddress; /* Bytes 56-63 */
- } SetMemoryMailbox;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- DAC960_V2_OperationDevice_T OperationDevice; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } DeviceOperation;
-}
-DAC960_V2_CommandMailbox_T;
-
-
-/*
- Define the DAC960 Driver IOCTL requests.
-*/
-
-#define DAC960_IOCTL_GET_CONTROLLER_COUNT 0xDAC001
-#define DAC960_IOCTL_GET_CONTROLLER_INFO 0xDAC002
-#define DAC960_IOCTL_V1_EXECUTE_COMMAND 0xDAC003
-#define DAC960_IOCTL_V2_EXECUTE_COMMAND 0xDAC004
-#define DAC960_IOCTL_V2_GET_HEALTH_STATUS 0xDAC005
-
-
-/*
- Define the DAC960_IOCTL_GET_CONTROLLER_INFO reply structure.
-*/
-
-typedef struct DAC960_ControllerInfo
-{
- unsigned char ControllerNumber;
- unsigned char FirmwareType;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char PCI_Bus;
- unsigned char PCI_Device;
- unsigned char PCI_Function;
- unsigned char IRQ_Channel;
- DAC960_PCI_Address_T PCI_Address;
- unsigned char ModelName[20];
- unsigned char FirmwareVersion[12];
-}
-DAC960_ControllerInfo_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void __user *DataTransferBuffer;
- DAC960_V1_DCDB_T __user *DCDB;
-}
-DAC960_V1_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void *DataTransferBuffer;
- DAC960_V1_DCDB_T *DCDB;
- DAC960_V1_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V1_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V1_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void __user *DataTransferBuffer;
- void __user *RequestSenseBuffer;
-}
-DAC960_V2_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void *DataTransferBuffer;
- void *RequestSenseBuffer;
- DAC960_V2_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V2_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V2_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_GET_HEALTH_STATUS request structure.
-*/
-
-typedef struct DAC960_V2_GetHealthStatus
-{
- unsigned char ControllerNumber;
- DAC960_V2_HealthStatusBuffer_T __user *HealthStatusBuffer;
-}
-DAC960_V2_GetHealthStatus_T;
-
-
-/*
- Import the Kernel Mode IOCTL interface.
-*/
-
-extern int DAC960_KernelIOCTL(unsigned int Request, void *Argument);
-
-
-/*
- DAC960_DriverVersion protects the private portion of this file.
-*/
-
-#ifdef DAC960_DriverVersion
-
-
-/*
- Define the maximum Driver Queue Depth and Controller Queue Depth supported
- by DAC960 V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxDriverQueueDepth 511
-#define DAC960_MaxControllerQueueDepth 512
-
-
-/*
- Define the maximum number of Scatter/Gather Segments supported for any
- DAC960 V1 and V2 Firmware controller.
-*/
-
-#define DAC960_V1_ScatterGatherLimit 33
-#define DAC960_V2_ScatterGatherLimit 128
-
-
-/*
- Define the number of Command Mailboxes and Status Mailboxes used by the
- DAC960 V1 and V2 Firmware Memory Mailbox Interface.
-*/
-
-#define DAC960_V1_CommandMailboxCount 256
-#define DAC960_V1_StatusMailboxCount 1024
-#define DAC960_V2_CommandMailboxCount 512
-#define DAC960_V2_StatusMailboxCount 512
-
-
-/*
- Define the DAC960 Controller Monitoring Timer Interval.
-*/
-
-#define DAC960_MonitoringTimerInterval (10 * HZ)
-
-
-/*
- Define the DAC960 Controller Secondary Monitoring Interval.
-*/
-
-#define DAC960_SecondaryMonitoringInterval (60 * HZ)
-
-
-/*
- Define the DAC960 Controller Health Status Monitoring Interval.
-*/
-
-#define DAC960_HealthStatusMonitoringInterval (1 * HZ)
-
-
-/*
- Define the DAC960 Controller Progress Reporting Interval.
-*/
-
-#define DAC960_ProgressReportingInterval (60 * HZ)
-
-
-/*
- Define the maximum number of Partitions allowed for each Logical Drive.
-*/
-
-#define DAC960_MaxPartitions 8
-#define DAC960_MaxPartitionsBits 3
-
-/*
- Define the DAC960 Controller fixed Block Size and Block Size Bits.
-*/
-
-#define DAC960_BlockSize 512
-#define DAC960_BlockSizeBits 9
-
-
-/*
- Define the number of Command structures that should be allocated as a
- group to optimize kernel memory allocation.
-*/
-
-#define DAC960_V1_CommandAllocationGroupSize 11
-#define DAC960_V2_CommandAllocationGroupSize 29
-
-
-/*
- Define the Controller Line Buffer, Progress Buffer, User Message, and
- Initial Status Buffer sizes.
-*/
-
-#define DAC960_LineBufferSize 100
-#define DAC960_ProgressBufferSize 200
-#define DAC960_UserMessageSize 200
-#define DAC960_InitialStatusBufferSize (8192-32)
-
-
-/*
- Define the DAC960 Controller Firmware Types.
-*/
-
-typedef enum
-{
- DAC960_V1_Controller = 1,
- DAC960_V2_Controller = 2
-}
-DAC960_FirmwareType_T;
-
-
-/*
- Define the DAC960 Controller Hardware Types.
-*/
-
-typedef enum
-{
- DAC960_BA_Controller = 1, /* eXtremeRAID 2000 */
- DAC960_LP_Controller = 2, /* AcceleRAID 352 */
- DAC960_LA_Controller = 3, /* DAC1164P */
- DAC960_PG_Controller = 4, /* DAC960PTL/PJ/PG */
- DAC960_PD_Controller = 5, /* DAC960PU/PD/PL/P */
- DAC960_P_Controller = 6, /* DAC960PU/PD/PL/P */
- DAC960_GEM_Controller = 7, /* AcceleRAID 4/5/600 */
-}
-DAC960_HardwareType_T;
-
-
-/*
- Define the Driver Message Levels.
-*/
-
-typedef enum DAC960_MessageLevel
-{
- DAC960_AnnounceLevel = 0,
- DAC960_InfoLevel = 1,
- DAC960_NoticeLevel = 2,
- DAC960_WarningLevel = 3,
- DAC960_ErrorLevel = 4,
- DAC960_ProgressLevel = 5,
- DAC960_CriticalLevel = 6,
- DAC960_UserCriticalLevel = 7
-}
-DAC960_MessageLevel_T;
-
-static char
- *DAC960_MessageLevelMap[] =
- { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING,
- KERN_ERR, KERN_CRIT, KERN_CRIT, KERN_CRIT };
-
-
-/*
- Define Driver Message macros.
-*/
-
-#define DAC960_Announce(Format, Arguments...) \
- DAC960_Message(DAC960_AnnounceLevel, Format, ##Arguments)
-
-#define DAC960_Info(Format, Arguments...) \
- DAC960_Message(DAC960_InfoLevel, Format, ##Arguments)
-
-#define DAC960_Notice(Format, Arguments...) \
- DAC960_Message(DAC960_NoticeLevel, Format, ##Arguments)
-
-#define DAC960_Warning(Format, Arguments...) \
- DAC960_Message(DAC960_WarningLevel, Format, ##Arguments)
-
-#define DAC960_Error(Format, Arguments...) \
- DAC960_Message(DAC960_ErrorLevel, Format, ##Arguments)
-
-#define DAC960_Progress(Format, Arguments...) \
- DAC960_Message(DAC960_ProgressLevel, Format, ##Arguments)
-
-#define DAC960_Critical(Format, Arguments...) \
- DAC960_Message(DAC960_CriticalLevel, Format, ##Arguments)
-
-#define DAC960_UserCritical(Format, Arguments...) \
- DAC960_Message(DAC960_UserCriticalLevel, Format, ##Arguments)
-
-
-struct DAC960_privdata {
- DAC960_HardwareType_T HardwareType;
- DAC960_FirmwareType_T FirmwareType;
- irq_handler_t InterruptHandler;
- unsigned int MemoryWindowSize;
-};
-
-
-/*
- Define the DAC960 V1 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V1_StatusMailbox
-{
- unsigned int Word; /* Word 0 */
- struct {
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 0 */
- unsigned char :7; /* Byte 1 Bits 0-6 */
- bool Valid:1; /* Byte 1 Bit 7 */
- DAC960_V1_CommandStatus_T CommandStatus; /* Bytes 2-3 */
- } Fields;
-}
-DAC960_V1_StatusMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V2_StatusMailbox
-{
- unsigned int Words[2]; /* Words 0-1 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandStatus_T CommandStatus; /* Byte 2 */
- unsigned char RequestSenseLength; /* Byte 3 */
- int DataTransferResidue; /* Bytes 4-7 */
- } Fields;
-}
-DAC960_V2_StatusMailbox_T;
-
-
-/*
- Define the DAC960 Driver Command Types.
-*/
-
-typedef enum
-{
- DAC960_ReadCommand = 1,
- DAC960_WriteCommand = 2,
- DAC960_ReadRetryCommand = 3,
- DAC960_WriteRetryCommand = 4,
- DAC960_MonitoringCommand = 5,
- DAC960_ImmediateCommand = 6,
- DAC960_QueuedCommand = 7
-}
-DAC960_CommandType_T;
-
-
-/*
- Define the DAC960 Driver Command structure.
-*/
-
-typedef struct DAC960_Command
-{
- int CommandIdentifier;
- DAC960_CommandType_T CommandType;
- struct DAC960_Controller *Controller;
- struct DAC960_Command *Next;
- struct completion *Completion;
- unsigned int LogicalDriveNumber;
- unsigned int BlockNumber;
- unsigned int BlockCount;
- unsigned int SegmentCount;
- int DmaDirection;
- struct scatterlist *cmd_sglist;
- struct request *Request;
- union {
- struct {
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_KernelCommand_T *KernelCommand;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- struct scatterlist ScatterList[DAC960_V1_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V1;
- struct {
- DAC960_V2_CommandMailbox_T CommandMailbox;
- DAC960_V2_KernelCommand_T *KernelCommand;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned char RequestSenseLength;
- int DataTransferResidue;
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- DAC960_SCSI_RequestSense_T *RequestSense;
- dma_addr_t RequestSenseDMA;
- struct scatterlist ScatterList[DAC960_V2_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V2;
- } FW;
-}
-DAC960_Command_T;
-
-
-/*
- Define the DAC960 Driver Controller structure.
-*/
-
-typedef struct DAC960_Controller
-{
- void __iomem *BaseAddress;
- void __iomem *MemoryMappedAddress;
- DAC960_FirmwareType_T FirmwareType;
- DAC960_HardwareType_T HardwareType;
- DAC960_IO_Address_T IO_Address;
- DAC960_PCI_Address_T PCI_Address;
- struct pci_dev *PCIDevice;
- unsigned char ControllerNumber;
- unsigned char ControllerName[4];
- unsigned char ModelName[20];
- unsigned char FullModelName[28];
- unsigned char FirmwareVersion[12];
- unsigned char Bus;
- unsigned char Device;
- unsigned char Function;
- unsigned char IRQ_Channel;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char MemorySize;
- unsigned char LogicalDriveCount;
- unsigned short CommandAllocationGroupSize;
- unsigned short ControllerQueueDepth;
- unsigned short DriverQueueDepth;
- unsigned short MaxBlocksPerCommand;
- unsigned short ControllerScatterGatherLimit;
- unsigned short DriverScatterGatherLimit;
- unsigned int CombinedStatusBufferLength;
- unsigned int InitialStatusLength;
- unsigned int CurrentStatusLength;
- unsigned int ProgressBufferLength;
- unsigned int UserStatusLength;
- struct dma_loaf DmaPages;
- unsigned long MonitoringTimerCount;
- unsigned long PrimaryMonitoringTime;
- unsigned long SecondaryMonitoringTime;
- unsigned long ShutdownMonitoringTimer;
- unsigned long LastProgressReportTime;
- unsigned long LastCurrentStatusTime;
- bool ControllerInitialized;
- bool MonitoringCommandDeferred;
- bool EphemeralProgressMessage;
- bool DriveSpinUpMessageDisplayed;
- bool MonitoringAlertMode;
- bool SuppressEnclosureMessages;
- struct timer_list MonitoringTimer;
- struct gendisk *disks[DAC960_MaxLogicalDrives];
- struct dma_pool *ScatterGatherPool;
- DAC960_Command_T *FreeCommands;
- unsigned char *CombinedStatusBuffer;
- unsigned char *CurrentStatusBuffer;
- struct request_queue *RequestQueue[DAC960_MaxLogicalDrives];
- int req_q_index;
- spinlock_t queue_lock;
- wait_queue_head_t CommandWaitQueue;
- wait_queue_head_t HealthStatusWaitQueue;
- DAC960_Command_T InitialCommand;
- DAC960_Command_T *Commands[DAC960_MaxDriverQueueDepth];
- struct proc_dir_entry *ControllerProcEntry;
- bool LogicalDriveInitiallyAccessible[DAC960_MaxLogicalDrives];
- void (*QueueCommand)(DAC960_Command_T *Command);
- bool (*ReadControllerConfiguration)(struct DAC960_Controller *);
- bool (*ReadDeviceConfiguration)(struct DAC960_Controller *);
- bool (*ReportDeviceConfiguration)(struct DAC960_Controller *);
- void (*QueueReadWriteCommand)(DAC960_Command_T *Command);
- union {
- struct {
- unsigned char GeometryTranslationHeads;
- unsigned char GeometryTranslationSectors;
- unsigned char PendingRebuildFlag;
- unsigned short StripeSize;
- unsigned short SegmentSize;
- unsigned short NewEventLogSequenceNumber;
- unsigned short OldEventLogSequenceNumber;
- unsigned short DeviceStateChannel;
- unsigned short DeviceStateTargetID;
- bool DualModeMemoryMailboxInterface;
- bool BackgroundInitializationStatusSupported;
- bool SAFTE_EnclosureManagementEnabled;
- bool NeedLogicalDriveInformation;
- bool NeedErrorTableInformation;
- bool NeedDeviceStateInformation;
- bool NeedDeviceInquiryInformation;
- bool NeedDeviceSerialNumberInformation;
- bool NeedRebuildProgress;
- bool NeedConsistencyCheckProgress;
- bool NeedBackgroundInitializationStatus;
- bool StartDeviceStateScan;
- bool RebuildProgressFirst;
- bool RebuildFlagPending;
- bool RebuildStatusPending;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V1_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V1_CommandMailbox_T *LastCommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V1_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V1_StatusMailbox_T *LastStatusMailbox;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
-
- DAC960_V1_DCDB_T *MonitoringDCDB;
- dma_addr_t MonitoringDCDB_DMA;
-
- DAC960_V1_Enquiry_T Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry;
- dma_addr_t NewEnquiryDMA;
-
- DAC960_V1_ErrorTable_T ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable;
- dma_addr_t NewErrorTableDMA;
-
- DAC960_V1_EventLogEntry_T *EventLogEntry;
- dma_addr_t EventLogEntryDMA;
-
- DAC960_V1_RebuildProgress_T *RebuildProgress;
- dma_addr_t RebuildProgressDMA;
- DAC960_V1_CommandStatus_T LastRebuildStatus;
- DAC960_V1_CommandStatus_T PendingRebuildStatus;
-
- DAC960_V1_LogicalDriveInformationArray_T LogicalDriveInformation;
- DAC960_V1_LogicalDriveInformationArray_T *NewLogicalDriveInformation;
- dma_addr_t NewLogicalDriveInformationDMA;
-
- DAC960_V1_BackgroundInitializationStatus_T
- *BackgroundInitializationStatus;
- dma_addr_t BackgroundInitializationStatusDMA;
- DAC960_V1_BackgroundInitializationStatus_T
- LastBackgroundInitializationStatus;
-
- DAC960_V1_DeviceState_T
- DeviceState[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_V1_DeviceState_T *NewDeviceState;
- dma_addr_t NewDeviceStateDMA;
-
- DAC960_SCSI_Inquiry_T
- InquiryStandardData[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData;
- dma_addr_t NewInquiryStandardDataDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- InquiryUnitSerialNumber[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
-
- int DeviceResetCount[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- bool DirectCommandActive[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- } V1;
- struct {
- unsigned int StatusChangeCounter;
- unsigned int NextEventSequenceNumber;
- unsigned int PhysicalDeviceIndex;
- bool NeedLogicalDeviceInformation;
- bool NeedPhysicalDeviceInformation;
- bool NeedDeviceSerialNumberInformation;
- bool StartLogicalDeviceInformationScan;
- bool StartPhysicalDeviceInformationScan;
- struct dma_pool *RequestSensePool;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V2_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V2_CommandMailbox_T *LastCommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V2_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V2_StatusMailbox_T *LastStatusMailbox;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
-
- dma_addr_t HealthStatusBufferDMA;
- DAC960_V2_HealthStatusBuffer_T *HealthStatusBuffer;
-
- DAC960_V2_ControllerInfo_T ControllerInformation;
- DAC960_V2_ControllerInfo_T *NewControllerInformation;
- dma_addr_t NewControllerInformationDMA;
-
- DAC960_V2_LogicalDeviceInfo_T
- *LogicalDeviceInformation[DAC960_MaxLogicalDrives];
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInformation;
- dma_addr_t NewLogicalDeviceInformationDMA;
-
- DAC960_V2_PhysicalDeviceInfo_T
- *PhysicalDeviceInformation[DAC960_V2_MaxPhysicalDevices];
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInformation;
- dma_addr_t NewPhysicalDeviceInformationDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber[DAC960_V2_MaxPhysicalDevices];
-
- DAC960_V2_Event_T *Event;
- dma_addr_t EventDMA;
-
- DAC960_V2_PhysicalToLogicalDevice_T *PhysicalToLogicalDevice;
- dma_addr_t PhysicalToLogicalDeviceDMA;
-
- DAC960_V2_PhysicalDevice_T
- LogicalDriveToVirtualDevice[DAC960_MaxLogicalDrives];
- bool LogicalDriveFoundDuringScan[DAC960_MaxLogicalDrives];
- } V2;
- } FW;
- unsigned char ProgressBuffer[DAC960_ProgressBufferSize];
- unsigned char UserStatusBuffer[DAC960_UserMessageSize];
-}
-DAC960_Controller_T;
-
-
-/*
- Simplify access to Firmware Version Dependent Data Structure Components
- and Functions.
-*/
-
-#define V1 FW.V1
-#define V2 FW.V2
-#define DAC960_QueueCommand(Command) \
- (Controller->QueueCommand)(Command)
-#define DAC960_ReadControllerConfiguration(Controller) \
- (Controller->ReadControllerConfiguration)(Controller)
-#define DAC960_ReadDeviceConfiguration(Controller) \
- (Controller->ReadDeviceConfiguration)(Controller)
-#define DAC960_ReportDeviceConfiguration(Controller) \
- (Controller->ReportDeviceConfiguration)(Controller)
-#define DAC960_QueueReadWriteCommand(Command) \
- (Controller->QueueReadWriteCommand)(Command)
-
-/*
- * dma_addr_writeql is provided to write dma_addr_t types
- * to a 64-bit pci address space register. The controller
- * will accept having the register written as two 32-bit
- * values.
- *
- * In HIGHMEM kernels, dma_addr_t is a 64-bit value.
- * without HIGHMEM, dma_addr_t is a 32-bit value.
- *
- * The compiler should always fix up the assignment
- * to u.wq appropriately, depending upon the size of
- * dma_addr_t.
- */
-static inline
-void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address)
-{
- union {
- u64 wq;
- uint wl[2];
- } u;
-
- u.wq = addr;
-
- writel(u.wl[0], write_address);
- writel(u.wl[1], write_address + 4);
-}
-
-/*
- Define the DAC960 GEM Series Controller Interface Register Offsets.
- */
-
-#define DAC960_GEM_RegisterWindowSize 0x600
-
-typedef enum
-{
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset = 0x214,
- DAC960_GEM_InboundDoorBellRegisterClearOffset = 0x218,
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset = 0x224,
- DAC960_GEM_OutboundDoorBellRegisterClearOffset = 0x228,
- DAC960_GEM_InterruptStatusRegisterOffset = 0x208,
- DAC960_GEM_InterruptMaskRegisterReadSetOffset = 0x22C,
- DAC960_GEM_InterruptMaskRegisterClearOffset = 0x230,
- DAC960_GEM_CommandMailboxBusAddressOffset = 0x510,
- DAC960_GEM_CommandStatusOffset = 0x518,
- DAC960_GEM_ErrorStatusRegisterReadSetOffset = 0x224,
- DAC960_GEM_ErrorStatusRegisterClearOffset = 0x228,
-}
-DAC960_GEM_RegisterOffsets_T;
-
-/*
- Define the structure of the DAC960 GEM Series Inbound Door Bell
- */
-
-typedef union DAC960_GEM_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool HardwareMailboxNewCommand:1;
- bool AcknowledgeHardwareMailboxStatus:1;
- bool GenerateInterrupt:1;
- bool ControllerReset:1;
- bool MemoryMailboxNewCommand:1;
- unsigned int :3;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxFull:1;
- bool InitializationInProgress:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_InboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Outbound Door Bell Register.
- */
-typedef union DAC960_GEM_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool AcknowledgeHardwareMailboxInterrupt:1;
- bool AcknowledgeMemoryMailboxInterrupt:1;
- unsigned int :6;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxStatusAvailable:1;
- bool MemoryMailboxStatusAvailable:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_OutboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Interrupt Mask Register.
- */
-typedef union DAC960_GEM_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int :16;
- unsigned int :8;
- unsigned int HardwareMailboxInterrupt:1;
- unsigned int MemoryMailboxInterrupt:1;
- unsigned int :6;
- } Bits;
-}
-DAC960_GEM_InterruptMaskRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Error Status Register.
- */
-
-typedef union DAC960_GEM_ErrorStatusRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- unsigned int :5;
- bool ErrorStatusPending:1;
- unsigned int :2;
- } Bits;
-}
-DAC960_GEM_ErrorStatusRegister_T;
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 GEM Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_GEM_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_GEM_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_GEM_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_GEM_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InterruptMaskRegisterReadSetOffset);
- return !(InterruptMaskRegister.Bits.HardwareMailboxInterrupt ||
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt);
-}
-
-static inline
-void DAC960_GEM_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_GEM_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_GEM_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_GEM_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_GEM_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_GEM_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_GEM_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readl(ControllerBaseAddress + DAC960_GEM_ErrorStatusRegisterReadSetOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 1);
- writel(0x03000000, ControllerBaseAddress +
- DAC960_GEM_ErrorStatusRegisterClearOffset);
- return true;
-}
-
-/*
- Define the DAC960 BA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_BA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_BA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_BA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_BA_InterruptStatusRegisterOffset = 0x30,
- DAC960_BA_InterruptMaskRegisterOffset = 0x34,
- DAC960_BA_CommandMailboxBusAddressOffset = 0x50,
- DAC960_BA_CommandStatusOffset = 0x58,
- DAC960_BA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_BA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_BA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- bool DisableInterruptsI2O:1; /* Bit 3 */
- unsigned int :4; /* Bits 4-7 */
- } Bits;
-}
-DAC960_BA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Error Status Register.
-*/
-
-typedef union DAC960_BA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_BA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 BA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_BA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_BA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_BA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_BA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_BA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_BA_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-
-static inline
-void DAC960_BA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_BA_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_BA_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_BA_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_BA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_BA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LP Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LP_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LP_InboundDoorBellRegisterOffset = 0x20,
- DAC960_LP_OutboundDoorBellRegisterOffset = 0x2C,
- DAC960_LP_InterruptStatusRegisterOffset = 0x30,
- DAC960_LP_InterruptMaskRegisterOffset = 0x34,
- DAC960_LP_CommandMailboxBusAddressOffset = 0x10,
- DAC960_LP_CommandStatusOffset = 0x18,
- DAC960_LP_ErrorStatusRegisterOffset = 0x2E
-}
-DAC960_LP_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LP_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Error Status Register.
-*/
-
-typedef union DAC960_LP_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LP Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LP_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_LP_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LP_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LP_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LP_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LP_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LP_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_LP_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_LP_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_LP_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_LP_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LP_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_LA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_LA_InterruptMaskRegisterOffset = 0x34,
- DAC960_LA_CommandOpcodeRegisterOffset = 0x50,
- DAC960_LA_CommandIdentifierRegisterOffset = 0x51,
- DAC960_LA_MailboxRegister2Offset = 0x52,
- DAC960_LA_MailboxRegister3Offset = 0x53,
- DAC960_LA_MailboxRegister4Offset = 0x54,
- DAC960_LA_MailboxRegister5Offset = 0x55,
- DAC960_LA_MailboxRegister6Offset = 0x56,
- DAC960_LA_MailboxRegister7Offset = 0x57,
- DAC960_LA_MailboxRegister8Offset = 0x58,
- DAC960_LA_MailboxRegister9Offset = 0x59,
- DAC960_LA_MailboxRegister10Offset = 0x5A,
- DAC960_LA_MailboxRegister11Offset = 0x5B,
- DAC960_LA_MailboxRegister12Offset = 0x5C,
- DAC960_LA_StatusCommandIdentifierRegOffset = 0x5D,
- DAC960_LA_StatusRegisterOffset = 0x5E,
- DAC960_LA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_LA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned char :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned char :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Error Status Register.
-*/
-
-typedef union DAC960_LA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_LA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LA_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_LA_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_LA_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_LA_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_LA_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_LA_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_LA_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LA_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_LA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LA_CommandIdentifierRegisterOffset);
- writeb(0xFF, ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PG Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PG_RegisterWindowSize 0x2000
-
-typedef enum
-{
- DAC960_PG_InboundDoorBellRegisterOffset = 0x0020,
- DAC960_PG_OutboundDoorBellRegisterOffset = 0x002C,
- DAC960_PG_InterruptMaskRegisterOffset = 0x0034,
- DAC960_PG_CommandOpcodeRegisterOffset = 0x1000,
- DAC960_PG_CommandIdentifierRegisterOffset = 0x1001,
- DAC960_PG_MailboxRegister2Offset = 0x1002,
- DAC960_PG_MailboxRegister3Offset = 0x1003,
- DAC960_PG_MailboxRegister4Offset = 0x1004,
- DAC960_PG_MailboxRegister5Offset = 0x1005,
- DAC960_PG_MailboxRegister6Offset = 0x1006,
- DAC960_PG_MailboxRegister7Offset = 0x1007,
- DAC960_PG_MailboxRegister8Offset = 0x1008,
- DAC960_PG_MailboxRegister9Offset = 0x1009,
- DAC960_PG_MailboxRegister10Offset = 0x100A,
- DAC960_PG_MailboxRegister11Offset = 0x100B,
- DAC960_PG_MailboxRegister12Offset = 0x100C,
- DAC960_PG_StatusCommandIdentifierRegOffset = 0x1018,
- DAC960_PG_StatusRegisterOffset = 0x101A,
- DAC960_PG_ErrorStatusRegisterOffset = 0x103F
-}
-DAC960_PG_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned int :27; /* Bits 5-31 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_PG_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int MessageUnitInterruptMask1:2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int MessageUnitInterruptMask2:5; /* Bits 3-7 */
- unsigned int Reserved0:24; /* Bits 8-31 */
- } Bits;
-}
-DAC960_PG_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Error Status Register.
-*/
-
-typedef union DAC960_PG_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PG_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PG Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PG_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_PG_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_PG_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_PG_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_PG_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_PG_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_PG_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PG_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PG_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PG_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PG_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PG_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PG_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PG_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PG_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PG_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PG_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PD Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PD_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_PD_CommandOpcodeRegisterOffset = 0x00,
- DAC960_PD_CommandIdentifierRegisterOffset = 0x01,
- DAC960_PD_MailboxRegister2Offset = 0x02,
- DAC960_PD_MailboxRegister3Offset = 0x03,
- DAC960_PD_MailboxRegister4Offset = 0x04,
- DAC960_PD_MailboxRegister5Offset = 0x05,
- DAC960_PD_MailboxRegister6Offset = 0x06,
- DAC960_PD_MailboxRegister7Offset = 0x07,
- DAC960_PD_MailboxRegister8Offset = 0x08,
- DAC960_PD_MailboxRegister9Offset = 0x09,
- DAC960_PD_MailboxRegister10Offset = 0x0A,
- DAC960_PD_MailboxRegister11Offset = 0x0B,
- DAC960_PD_MailboxRegister12Offset = 0x0C,
- DAC960_PD_StatusCommandIdentifierRegOffset = 0x0D,
- DAC960_PD_StatusRegisterOffset = 0x0E,
- DAC960_PD_ErrorStatusRegisterOffset = 0x3F,
- DAC960_PD_InboundDoorBellRegisterOffset = 0x40,
- DAC960_PD_OutboundDoorBellRegisterOffset = 0x41,
- DAC960_PD_InterruptEnableRegisterOffset = 0x43
-}
-DAC960_PD_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool NewCommand:1; /* Bit 0 */
- bool AcknowledgeStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- unsigned char :4; /* Bits 4-7 */
- } Write;
- struct {
- bool MailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_PD_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeInterrupt:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Write;
- struct {
- bool StatusAvailable:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Read;
-}
-DAC960_PD_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Interrupt Enable Register.
-*/
-
-typedef union DAC960_PD_InterruptEnableRegister
-{
- unsigned char All;
- struct {
- bool EnableInterrupts:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Bits;
-}
-DAC960_PD_InterruptEnableRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Error Status Register.
-*/
-
-typedef union DAC960_PD_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PD_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PD Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PD_NewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.NewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_AcknowledgeStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_MailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.MailboxFull;
-}
-
-static inline
-bool DAC960_PD_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PD_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_StatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.StatusAvailable;
-}
-
-static inline
-void DAC960_PD_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = true;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-void DAC960_PD_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = false;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
- return InterruptEnableRegister.Bits.EnableInterrupts;
-}
-
-static inline
-void DAC960_PD_WriteCommandMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PD_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PD_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PD_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PD_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PD_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PD_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PD_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PD_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PD_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PD_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- return true;
-}
-
-static inline void DAC960_P_To_PD_TranslateEnquiry(void *Enquiry)
-{
- memcpy(Enquiry + 132, Enquiry + 36, 64);
- memset(Enquiry + 36, 0, 96);
-}
-
-static inline void DAC960_P_To_PD_TranslateDeviceState(void *DeviceState)
-{
- memcpy(DeviceState + 2, DeviceState + 3, 1);
- memmove(DeviceState + 4, DeviceState + 5, 2);
- memmove(DeviceState + 6, DeviceState + 8, 4);
-}
-
-static inline
-void DAC960_PD_To_P_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Type5.LD.LogicalDriveNumber;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= CommandMailbox->Bytes[7] << 6;
- CommandMailbox->Bytes[7] = LogicalDriveNumber;
-}
-
-static inline
-void DAC960_P_To_PD_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Bytes[7];
- CommandMailbox->Bytes[7] = CommandMailbox->Bytes[3] >> 6;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= LogicalDriveNumber << 3;
-}
-
-
-/*
- Define prototypes for the forward referenced DAC960 Driver Internal Functions.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *);
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_RequestFunction(struct request_queue *);
-static irqreturn_t DAC960_BA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LP_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PG_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PD_InterruptHandler(int, void *);
-static irqreturn_t DAC960_P_InterruptHandler(int, void *);
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_MonitoringTimerFunction(struct timer_list *);
-static void DAC960_Message(DAC960_MessageLevel_T, unsigned char *,
- DAC960_Controller_T *, ...);
-static void DAC960_CreateProcEntries(DAC960_Controller_T *);
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *);
-
-#endif /* DAC960_DriverVersion */
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index d4913516823f..c1747f2953bc 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -121,18 +121,6 @@ source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
-config BLK_DEV_DAC960
- tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
- depends on PCI
- help
- This driver adds support for the Mylex DAC960, AcceleRAID, and
- eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/blockdev/README.DAC960> for further information
- about this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called DAC960.
-
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 8566b188368b..a53cc1e3a2d3 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
--
2.16.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 3/3] drivers/block: Remove DAC960 driver
2018-10-12 7:15 ` [PATCH 3/3] drivers/block: Remove DAC960 driver Hannes Reinecke
@ 2018-10-17 7:28 ` Christoph Hellwig
0 siblings, 0 replies; 13+ messages in thread
From: Christoph Hellwig @ 2018-10-17 7:28 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Jens Axboe, Martin K. Petersen, Christoph Hellwig,
James Bottomley, linux-scsi, linux-block, Hannes Reinecke
On Fri, Oct 12, 2018 at 09:15:48AM +0200, Hannes Reinecke wrote:
> The DAC960 driver has been obsoleted by the myrb/myrs drivers,
> so it can be dropped.
Looks fine,
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCHv5 0/3] Deprecate DAC960 driver
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
` (2 preceding siblings ...)
2018-10-12 7:15 ` [PATCH 3/3] drivers/block: Remove DAC960 driver Hannes Reinecke
@ 2018-10-12 13:38 ` Bart Van Assche
2018-10-12 16:39 ` Jens Axboe
2018-10-17 14:19 ` Jens Axboe
4 siblings, 1 reply; 13+ messages in thread
From: Bart Van Assche @ 2018-10-12 13:38 UTC (permalink / raw)
To: Hannes Reinecke, Jens Axboe
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block
On 10/12/18 12:15 AM, Hannes Reinecke wrote:
> Hi all,
>
> as we're trying to get rid of the remaining request_fn drivers here's
> a patchset to move the DAC960 driver to the SCSI stack.
> As per request from hch I've split up the driver into two new SCSI
> drivers called 'myrb' and 'myrs'.
Hi Hannes,
Apparently only patches 1/3 and 2/3 made it to the linux-scsi mailing
list but patch 3/3 not. See also
https://marc.info/?l=linux-scsi&r=3&b=201810&w=2.
Bart.
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCHv5 0/3] Deprecate DAC960 driver
2018-10-12 13:38 ` [PATCHv5 0/3] Deprecate " Bart Van Assche
@ 2018-10-12 16:39 ` Jens Axboe
0 siblings, 0 replies; 13+ messages in thread
From: Jens Axboe @ 2018-10-12 16:39 UTC (permalink / raw)
To: Bart Van Assche, Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block
On 10/12/18 7:38 AM, Bart Van Assche wrote:
> On 10/12/18 12:15 AM, Hannes Reinecke wrote:
>> Hi all,
>>
>> as we're trying to get rid of the remaining request_fn drivers here's
>> a patchset to move the DAC960 driver to the SCSI stack.
>> As per request from hch I've split up the driver into two new SCSI
>> drivers called 'myrb' and 'myrs'.
>
> Hi Hannes,
>
> Apparently only patches 1/3 and 2/3 made it to the linux-scsi mailing
> list but patch 3/3 not. See also
> https://marc.info/?l=linux-scsi&r=3&b=201810&w=2.
I'm guessing it's just too big. I got it, but probably due to the CC.
--
Jens Axboe
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCHv5 0/3] Deprecate DAC960 driver
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
` (3 preceding siblings ...)
2018-10-12 13:38 ` [PATCHv5 0/3] Deprecate " Bart Van Assche
@ 2018-10-17 14:19 ` Jens Axboe
2018-10-17 22:49 ` Martin K. Petersen
4 siblings, 1 reply; 13+ messages in thread
From: Jens Axboe @ 2018-10-17 14:19 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block
On 10/12/18 1:15 AM, Hannes Reinecke wrote:
> Hi all,
>
> as we're trying to get rid of the remaining request_fn drivers here's
> a patchset to move the DAC960 driver to the SCSI stack.
> As per request from hch I've split up the driver into two new SCSI
> drivers called 'myrb' and 'myrs'.
>
> The 'myrb' driver only supports the earlier (V1) firmware interface, which
> doesn't have a SCSI interface for the logical drives; for those I've added
> a (pretty rudimentary, admittedly) SCSI translation for them.
>
> The 'myrs' driver supports the newer (V2) firmware interface, which is
> SCSI based and doesn't need the translation layer.
>
> And the weird proc interface from DAC960 has been converted to sysfs attributes.
>
> Tested with eXtremeRAID 1100 (for V1 Firmware) and Mylex AcceleRAID 170
> (for V2 Firmware).
Martin, are you taking the two new drivers? Then I'll queue up the
old driver removal.
--
Jens Axboe
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/3] drivers/block: Remove DAC960 driver
2018-10-17 15:25 [PATCHv6 " Hannes Reinecke
@ 2018-10-17 15:25 ` Hannes Reinecke
0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2018-10-17 15:25 UTC (permalink / raw)
To: Jens Axboe
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, linux-block, Hannes Reinecke, Hannes Reinecke
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
Documentation/blockdev/README.DAC960 | 756 ----
drivers/block/DAC960.c | 7229 ----------------------------------
drivers/block/DAC960.h | 4414 ---------------------
drivers/block/Kconfig | 12 -
drivers/block/Makefile | 1 -
5 files changed, 12412 deletions(-)
delete mode 100644 Documentation/blockdev/README.DAC960
delete mode 100644 drivers/block/DAC960.c
delete mode 100644 drivers/block/DAC960.h
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
deleted file mode 100644
index bd85fb9dc6e5..000000000000
--- a/Documentation/blockdev/README.DAC960
+++ /dev/null
@@ -1,756 +0,0 @@
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Version 2.2.11 for Linux 2.2.19
- Version 2.4.11 for Linux 2.4.12
-
- PRODUCTION RELEASE
-
- 11 October 2001
-
- Leonard N. Zubkoff
- Dandelion Digital
- lnz@dandelion.com
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
- INTRODUCTION
-
-Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
-controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
-California 94555, USA and can be reached at 510.796.6100 or on the World Wide
-Web at http://www.mylex.com. Mylex Technical Support can be reached by
-electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
-510.745.7715. Contact information for offices in Europe and Japan is available
-on their Web site.
-
-The latest information on Linux support for DAC960 PCI RAID Controllers, as
-well as the most recent release of this driver, will always be available from
-my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
-driver supports all current Mylex PCI RAID controllers including the new
-eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
-new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
-and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
-minimum firmware version requirements. For simplicity, in most places this
-documentation refers to DAC960 generically rather than explicitly listing all
-the supported models.
-
-Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
-Please include with the bug report the complete configuration messages reported
-by the driver at startup, along with any subsequent system messages relevant to
-the controller's operation, and a detailed description of your system's
-hardware configuration. Driver bugs are actually quite rare; if you encounter
-problems with disks being marked offline, for example, please contact Mylex
-Technical Support as the problem is related to the hardware configuration
-rather than the Linux driver.
-
-Please consult the RAID controller documentation for detailed information
-regarding installation and configuration of the controllers. This document
-primarily provides information specific to the Linux support.
-
-
- DRIVER FEATURES
-
-The DAC960 RAID controllers are supported solely as high performance RAID
-controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
-driver operates at the block device level, the same level as the SCSI and IDE
-drivers. Unlike other RAID controllers currently supported on Linux, the
-DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
-complexity and unnecessary code that would be associated with an implementation
-as a SCSI driver. The DAC960 driver is designed for as high a performance as
-possible with no compromises or extra code for compatibility with lower
-performance devices. The DAC960 driver includes extensive error logging and
-online configuration management capabilities. Except for initial configuration
-of the controller and adding new disk drives, most everything can be handled
-from Linux while the system is operational.
-
-The DAC960 driver is architected to support up to 8 controllers per system.
-Each DAC960 parallel SCSI controller can support up to 15 disk drives per
-channel, for a maximum of 60 drives on a four channel controller; the fibre
-channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
-a total of 250 drives. The drives installed on a controller are divided into
-one or more "Drive Groups", and then each Drive Group is subdivided further
-into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
-and caching policy associated with it, and it appears to Linux as a single
-block device. Logical Drives are further subdivided into up to 7 partitions
-through the normal Linux and PC disk partitioning schemes. Logical Drives are
-also known as "System Drives", and Drive Groups are also called "Packs". Both
-terms are in use in the Mylex documentation; I have chosen to standardize on
-the more generic "Logical Drive" and "Drive Group".
-
-DAC960 RAID disk devices are named in the style of the obsolete Device File
-System (DEVFS). The device corresponding to Logical Drive D on Controller C
-is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
-through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
-Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
-disks the device names will not change in the event of a disk drive failure.
-The DAC960 driver is assigned major numbers 48 - 55 with one major number per
-controller. The 8 bits of minor number are divided into 5 bits for the Logical
-Drive and 3 bits for the partition.
-
-
- SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
-
-The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
-PCI RAID Controllers as of the date of this document. It is recommended that
-anyone purchasing a Mylex PCI RAID Controller not in the following table
-contact the author beforehand to verify that it is or will be supported.
-
-eXtremeRAID 3000
- 1 Wide Ultra-2/LVD SCSI channel
- 2 External Fibre FC-AL channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-eXtremeRAID 2000
- 4 Wide Ultra-160 LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 352
- 2 Wide Ultra-160 LVD SCSI channels
- 100MHz Intel i960RN RISC Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 170
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RM RISC Processor
- 16MB/32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 160 (AcceleRAID 170LP)
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RS RISC Processor
- Built in 16M ECC SDRAM Memory
- PCI Low Profile Form Factor - fit for 2U height
-
-eXtremeRAID 1100 (DAC1164P)
- 3 Wide Ultra-2/LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
-
-AcceleRAID 250 (DAC960PTL1)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 200 (DAC960PTL0)
- Uses onboard Symbios SCSI chips on certain motherboards
- Includes no onboard SCSI Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 150 (DAC960PRL)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 33MHz Intel i960RP RISC Processor
- 4MB Parity EDO Memory
-
-DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
- 33MHz Intel i960RP RISC Processor
- 4MB/8MB ECC EDO Memory
-
-DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960P 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
-6.00-01 or above is required.
-
-For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
-
-For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
-required.
-
-For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
-
-For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
-3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
-version 2.73-0-00 or above is required (for single Flash ROM controllers)
-
-Please note that not all SCSI disk drives are suitable for use with DAC960
-controllers, and only particular firmware versions of any given model may
-actually function correctly. Similarly, not all motherboards have a BIOS that
-properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
-DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
-If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
-verify compatibility. Mylex makes available a hard disk compatibility list at
-http://www.mylex.com/support/hdcomp/hd-lists.html.
-
-
- DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
-
-To install the DAC960 RAID driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
- cd /usr/src
- tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
- mv README.DAC960 linux/Documentation
- mv DAC960.[ch] linux/drivers/block
- patch -p0 < DAC960.patch (if DAC960.patch is included)
- cd linux
- make config
- make bzImage (or zImage)
-
-Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
-standard kernel, run lilo if appropriate, and reboot.
-
-To create the necessary devices in /dev, the "make_rd" script included in
-"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
-LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
-are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
-statically linked executables of LILO and FDISK. This modified version of LILO
-will allow booting from a DAC960 controller and/or mounting the root file
-system from a DAC960.
-
-Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
-controllers. Installing directly onto a DAC960 may be problematic from other
-Linux distributions until their installation utilities are updated.
-
-
- INSTALLATION NOTES
-
-Before installing Linux or adding DAC960 logical drives to an existing Linux
-system, the controller must first be configured to provide one or more logical
-drives using the BIOS Configuration Utility or DACCF. Please note that since
-there are only at most 6 usable partitions on each logical drive, systems
-requiring more partitions should subdivide a drive group into multiple logical
-drives, each of which can have up to 6 usable partitions. Also, note that with
-large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
-rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
-will cause the logical drive geometry to have more than 65535 cylinders which
-will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
-can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
-during the BIOS initialization sequence.
-
-For maximum performance and the most efficient E2FSCK performance, it is
-recommended that EXT2 file systems be built with a 4KB block size and 16 block
-stride to match the DAC960 controller's 64KB default stripe size. The command
-"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
-large number of small files on the file systems, it is also beneficial to add
-the "-i 16384" option to increase the bytes per inode parameter thereby
-reducing the file system metadata. Finally, on systems that will only be run
-with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
-with the "-s 1" option.
-
-
- DAC960 ANNOUNCEMENTS MAILING LIST
-
-The DAC960 Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
-"dac960-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
-
-
- CONTROLLER CONFIGURATION AND STATUS MONITORING
-
-The DAC960 RAID controllers running firmware 4.06 or above include a Background
-Initialization facility so that system downtime is minimized both for initial
-installation and subsequent configuration of additional storage. The BIOS
-Configuration Utility (accessible via Alt-R during the BIOS initialization
-sequence) is used to quickly configure the controller, and then the logical
-drives that have been created are available for immediate use even while they
-are still being initialized by the controller. The primary need for online
-configuration and status monitoring is then to avoid system downtime when disk
-drives fail and must be replaced. Mylex's online monitoring and configuration
-utilities are being ported to Linux and will become available at some point in
-the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
-enclosure, the controller is able to rebuild failed drives automatically as
-soon as a drive replacement is made available.
-
-The primary interfaces for controller configuration and status monitoring are
-special files created in the /proc/rd/... hierarchy along with the normal
-system console logging mechanism. Whenever the system is operating, the DAC960
-driver queries each controller for status information every 10 seconds, and
-checks for additional conditions every 60 seconds. The initial status of each
-controller is always available for controller N in /proc/rd/cN/initial_status,
-and the current status as of the last status monitoring query is available in
-/proc/rd/cN/current_status. In addition, status changes are also logged by the
-driver to the system console and will appear in the log files maintained by
-syslog. The progress of asynchronous rebuild or consistency check operations
-is also available in /proc/rd/cN/current_status, and progress messages are
-logged to the system console at most every 60 seconds.
-
-Starting with the 2.2.3/2.0.3 versions of the driver, the status information
-available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
-augmented to include the vendor, model, revision, and serial number (if
-available) for each physical device found connected to the controller:
-
-***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PRL PCI RAID Controller
- Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
- PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- SAF-TE Enclosure Management Enabled
- Physical Devices:
- 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68016775HA
- Disk Status: Online, 17928192 blocks
- 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68004E53HA
- Disk Status: Online, 17928192 blocks
- 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13013935HA
- Disk Status: Online, 17928192 blocks
- 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13016897HA
- Disk Status: Online, 17928192 blocks
- 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68019905HA
- Disk Status: Online, 17928192 blocks
- 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68012753HA
- Disk Status: Online, 17928192 blocks
- 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-To simplify the monitoring process for custom software, the special file
-/proc/rd/status returns "OK" when all DAC960 controllers in the system are
-operating normally and no failures have occurred, or "ALERT" if any logical
-drives are offline or critical or any non-standby physical drives are dead.
-
-Configuration commands for controller N are available via the special file
-/proc/rd/cN/user_command. A human readable command can be written to this
-special file to initiate a configuration operation, and the results of the
-operation can then be read back from the special file in addition to being
-logged to the system console. The shell command sequence
-
- echo "<configuration-command>" > /proc/rd/c0/user_command
- cat /proc/rd/c0/user_command
-
-is typically used to execute configuration commands. The configuration
-commands are:
-
- flush-cache
-
- The "flush-cache" command flushes the controller's cache. The system
- automatically flushes the cache at shutdown or if the driver module is
- unloaded, so this command is only needed to be certain a write back cache
- is flushed to disk before the system is powered off by a command to a UPS.
- Note that the flush-cache command also stops an asynchronous rebuild or
- consistency check, so it should not be used except when the system is being
- halted.
-
- kill <channel>:<target-id>
-
- The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
- This command is provided primarily for testing, and should not be used
- during normal system operation.
-
- make-online <channel>:<target-id>
-
- The "make-online" command changes the physical drive <channel>:<target-id>
- from status DEAD to status ONLINE. In cases where multiple physical drives
- have been killed simultaneously, this command may be used to bring all but
- one of them back online, after which a rebuild to the final drive is
- necessary.
-
- Warning: make-online should only be used on a dead physical drive that is
- an active part of a drive group, never on a standby drive. The command
- should never be used on a dead drive that is part of a critical logical
- drive; rebuild should be used if only a single drive is dead.
-
- make-standby <channel>:<target-id>
-
- The "make-standby" command changes physical drive <channel>:<target-id>
- from status DEAD to status STANDBY. It should only be used in cases where
- a dead drive was replaced after an automatic rebuild was performed onto a
- standby drive. It cannot be used to add a standby drive to the controller
- configuration if one was not created initially; the BIOS Configuration
- Utility must be used for that currently.
-
- rebuild <channel>:<target-id>
-
- The "rebuild" command initiates an asynchronous rebuild onto physical drive
- <channel>:<target-id>. It should only be used when a dead drive has been
- replaced.
-
- check-consistency <logical-drive-number>
-
- The "check-consistency" command initiates an asynchronous consistency check
- of <logical-drive-number> with automatic restoration. It can be used
- whenever it is desired to verify the consistency of the redundancy
- information.
-
- cancel-rebuild
- cancel-consistency-check
-
- The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
- rebuild or consistency check operations previously initiated.
-
-
- EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group without a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:1 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages indicating that Logical
-Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:1 is now DEAD
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-The Sense Keys logged here are just Check Condition / Unit Attention conditions
-arising from a SCSI bus reset that is forced by the controller during its error
-recovery procedures. Concurrently with the above, the driver status available
-from /proc/rd also reflects the drive failure. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Dead, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-Since there are no standby drives configured, the system can continue to access
-the logical drives in a performance degraded mode until the failed drive is
-replaced and a rebuild operation completed to restore the redundancy of the
-logical drives. Once Physical Drive 1:1 is replaced with a properly
-functioning drive, or if the physical drive was killed without having failed
-(e.g., due to electrical problems on the SCSI bus), the user can instruct the
-controller to initiate a rebuild operation onto the newly replaced drive:
-
-gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Rebuild of Physical Drive 1:1 Initiated
-
-The echo command instructs the controller to initiate an asynchronous rebuild
-operation onto Physical Drive 1:1, and the status message that results from the
-operation is then available for reading from /proc/rd/c0/user_command, as well
-as being logged to the console by the driver.
-
-Within 10 seconds of this command the driver logs the initiation of the
-asynchronous rebuild operation:
-
-DAC960#0: Rebuild of Physical Drive 1:1 Initiated
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
-
-and every minute a progress message is logged to the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:1 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-
- EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group with a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Standby, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:2 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages:
-
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:2 is now DEAD
-DAC960#0: Physical Drive 1:2 killed because it was removed
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-Since a standby drive is configured, the controller automatically begins
-rebuilding onto the standby drive:
-
-DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-Concurrently with the above, the driver status available from /proc/rd also
-reflects the drive failure and automatic rebuild. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-
-and every minute a progress message is logged on the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:3 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-Note that the absence of a viable standby drive does not create an "ALERT"
-status. Once dead Physical Drive 1:2 has been replaced, the controller must be
-told that this has occurred and that the newly replaced drive should become the
-new standby drive:
-
-gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Make Standby of Physical Drive 1:2 Succeeded
-
-The echo command instructs the controller to make Physical Drive 1:2 into a
-standby drive, and the status message that results from the operation is then
-available for reading from /proc/rd/c0/user_command, as well as being logged to
-the console by the driver. Within 60 seconds of this command the driver logs:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:2 is now STANDBY
-DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Standby, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
deleted file mode 100644
index 581312ac375f..000000000000
--- a/drivers/block/DAC960.c
+++ /dev/null
@@ -1,7229 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
- Portions Copyright 2002 by Mylex (An IBM Business Unit)
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
-*/
-
-
-#define DAC960_DriverVersion "2.5.49"
-#define DAC960_DriverDate "21 Aug 2007"
-
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/blkdev.h>
-#include <linux/bio.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/genhd.h>
-#include <linux/hdreg.h>
-#include <linux/blkpg.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/random.h>
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include "DAC960.h"
-
-#define DAC960_GAM_MINOR 252
-
-
-static DEFINE_MUTEX(DAC960_mutex);
-static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
-static int DAC960_ControllerCount;
-static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
-
-static long disk_size(DAC960_Controller_T *p, int drive_nr)
-{
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (drive_nr >= p->LogicalDriveCount)
- return 0;
- return p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (i == NULL)
- return 0;
- return i->ConfigurableDeviceSize;
- }
-}
-
-static int DAC960_open(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
- int ret = -ENXIO;
-
- mutex_lock(&DAC960_mutex);
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- goto out;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- goto out;
- }
-
- check_disk_change(bdev);
-
- if (!get_capacity(p->disks[drive_nr]))
- goto out;
- ret = 0;
-out:
- mutex_unlock(&DAC960_mutex);
- return ret;
-}
-
-static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (p->FirmwareType == DAC960_V1_Controller) {
- geo->heads = p->V1.GeometryTranslationHeads;
- geo->sectors = p->V1.GeometryTranslationSectors;
- geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize / (geo->heads * geo->sectors);
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- switch (i->DriveGeometry) {
- case DAC960_V2_Geometry_128_32:
- geo->heads = 128;
- geo->sectors = 32;
- break;
- case DAC960_V2_Geometry_255_63:
- geo->heads = 255;
- geo->sectors = 63;
- break;
- default:
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- p, i->DriveGeometry);
- return -EINVAL;
- }
-
- geo->cylinders = i->ConfigurableDeviceSize /
- (geo->heads * geo->sectors);
- }
-
- return 0;
-}
-
-static unsigned int DAC960_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (!p->LogicalDriveInitiallyAccessible[drive_nr])
- return DISK_EVENT_MEDIA_CHANGE;
- return 0;
-}
-
-static int DAC960_revalidate_disk(struct gendisk *disk)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int unit = (long)disk->private_data;
-
- set_capacity(disk, disk_size(p, unit));
- return 0;
-}
-
-static const struct block_device_operations DAC960_BlockDeviceOperations = {
- .owner = THIS_MODULE,
- .open = DAC960_open,
- .getgeo = DAC960_getgeo,
- .check_events = DAC960_check_events,
- .revalidate_disk = DAC960_revalidate_disk,
-};
-
-
-/*
- DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
- Copyright Notice, and Electronic Mail Address.
-*/
-
-static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
-{
- DAC960_Announce("***** DAC960 RAID Driver Version "
- DAC960_DriverVersion " of "
- DAC960_DriverDate " *****\n", Controller);
- DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
- "<lnz@dandelion.com>\n", Controller);
-}
-
-
-/*
- DAC960_Failure prints a standardized error message, and then returns false.
-*/
-
-static bool DAC960_Failure(DAC960_Controller_T *Controller,
- unsigned char *ErrorMessage)
-{
- DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
- Controller);
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
- return false;
-}
-
-/*
- init_dma_loaf() and slice_dma_loaf() are helper functions for
- aggregating the dma-mapped memory for a well-known collection of
- data structures that are of different lengths.
-
- These routines don't guarantee any alignment. The caller must
- include any space needed for alignment in the sizes of the structures
- that are passed in.
- */
-
-static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
- size_t len)
-{
- void *cpu_addr;
- dma_addr_t dma_handle;
-
- cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
- if (cpu_addr == NULL)
- return false;
-
- loaf->cpu_free = loaf->cpu_base = cpu_addr;
- loaf->dma_free =loaf->dma_base = dma_handle;
- loaf->length = len;
- memset(cpu_addr, 0, len);
- return true;
-}
-
-static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
- dma_addr_t *dma_handle)
-{
- void *cpu_end = loaf->cpu_free + len;
- void *cpu_addr = loaf->cpu_free;
-
- BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
- *dma_handle = loaf->dma_free;
- loaf->cpu_free = cpu_end;
- loaf->dma_free += len;
- return cpu_addr;
-}
-
-static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
-{
- if (loaf_handle->cpu_base != NULL)
- pci_free_consistent(dev, loaf_handle->length,
- loaf_handle->cpu_base, loaf_handle->dma_base);
-}
-
-
-/*
- DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
- data structures for Controller. It returns true on success and false on
- failure.
-*/
-
-static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int CommandAllocationLength, CommandAllocationGroupSize;
- int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
- void *AllocationPointer = NULL;
- void *ScatterGatherCPU = NULL;
- dma_addr_t ScatterGatherDMA;
- struct dma_pool *ScatterGatherPool;
- void *RequestSenseCPU = NULL;
- dma_addr_t RequestSenseDMA;
- struct dma_pool *RequestSensePool = NULL;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
- CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V1_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
- sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- Controller->ScatterGatherPool = ScatterGatherPool;
- }
- else
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
- CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V2_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
- sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- RequestSensePool = dma_pool_create("DAC960_V2_RequestSense",
- &Controller->PCIDevice->dev, sizeof(DAC960_SCSI_RequestSense_T),
- sizeof(int), 0);
- if (RequestSensePool == NULL) {
- dma_pool_destroy(ScatterGatherPool);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- }
- Controller->ScatterGatherPool = ScatterGatherPool;
- Controller->V2.RequestSensePool = RequestSensePool;
- }
- Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
- Controller->FreeCommands = NULL;
- for (CommandIdentifier = 1;
- CommandIdentifier <= Controller->DriverQueueDepth;
- CommandIdentifier++)
- {
- DAC960_Command_T *Command;
- if (--CommandsRemaining <= 0)
- {
- CommandsRemaining =
- Controller->DriverQueueDepth - CommandIdentifier + 1;
- if (CommandsRemaining > CommandAllocationGroupSize)
- CommandsRemaining = CommandAllocationGroupSize;
- CommandGroupByteCount =
- CommandsRemaining * CommandAllocationLength;
- AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
- if (AllocationPointer == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- Command = (DAC960_Command_T *) AllocationPointer;
- AllocationPointer += CommandAllocationLength;
- Command->CommandIdentifier = CommandIdentifier;
- Command->Controller = Controller;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
- Controller->Commands[CommandIdentifier-1] = Command;
- ScatterGatherCPU = dma_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
- &ScatterGatherDMA);
- if (ScatterGatherCPU == NULL)
- return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
-
- if (RequestSensePool != NULL) {
- RequestSenseCPU = dma_pool_alloc(RequestSensePool, GFP_ATOMIC,
- &RequestSenseDMA);
- if (RequestSenseCPU == NULL) {
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU,
- ScatterGatherDMA);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- }
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- Command->cmd_sglist = Command->V1.ScatterList;
- Command->V1.ScatterGatherList =
- (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
- } else {
- Command->cmd_sglist = Command->V2.ScatterList;
- Command->V2.ScatterGatherList =
- (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
- Command->V2.RequestSense =
- (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
- Command->V2.RequestSenseDMA = RequestSenseDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
- }
- }
- return true;
-}
-
-
-/*
- DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
- structures for Controller.
-*/
-
-static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int i;
- struct dma_pool *ScatterGatherPool = Controller->ScatterGatherPool;
- struct dma_pool *RequestSensePool = NULL;
- void *ScatterGatherCPU;
- dma_addr_t ScatterGatherDMA;
- void *RequestSenseCPU;
- dma_addr_t RequestSenseDMA;
- DAC960_Command_T *CommandGroup = NULL;
-
-
- if (Controller->FirmwareType == DAC960_V2_Controller)
- RequestSensePool = Controller->V2.RequestSensePool;
-
- Controller->FreeCommands = NULL;
- for (i = 0; i < Controller->DriverQueueDepth; i++)
- {
- DAC960_Command_T *Command = Controller->Commands[i];
-
- if (Command == NULL)
- continue;
-
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
- ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
- RequestSenseCPU = NULL;
- RequestSenseDMA = (dma_addr_t)0;
- } else {
- ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
- ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
- RequestSenseCPU = (void *)Command->V2.RequestSense;
- RequestSenseDMA = Command->V2.RequestSenseDMA;
- }
- if (ScatterGatherCPU != NULL)
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
- if (RequestSenseCPU != NULL)
- dma_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
-
- if ((Command->CommandIdentifier
- % Controller->CommandAllocationGroupSize) == 1) {
- /*
- * We can't free the group of commands until all of the
- * request sense and scatter gather dma structures are free.
- * Remember the beginning of the group, but don't free it
- * until we've reached the beginning of the next group.
- */
- kfree(CommandGroup);
- CommandGroup = Command;
- }
- Controller->Commands[i] = NULL;
- }
- kfree(CommandGroup);
-
- if (Controller->CombinedStatusBuffer != NULL)
- {
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NULL;
- Controller->CurrentStatusBuffer = NULL;
- }
-
- dma_pool_destroy(ScatterGatherPool);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return;
-
- dma_pool_destroy(RequestSensePool);
-
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- kfree(Controller->V2.LogicalDeviceInformation[i]);
- Controller->V2.LogicalDeviceInformation[i] = NULL;
- }
-
- for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
- {
- kfree(Controller->V2.PhysicalDeviceInformation[i]);
- Controller->V2.PhysicalDeviceInformation[i] = NULL;
- kfree(Controller->V2.InquiryUnitSerialNumber[i]);
- Controller->V2.InquiryUnitSerialNumber[i] = NULL;
- }
-}
-
-
-/*
- DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
- Firmware Controllers.
-*/
-
-static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandStatus = 0;
-}
-
-
-/*
- DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
- Firmware Controllers.
-*/
-
-static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- Command->V2.CommandStatus = 0;
-}
-
-
-/*
- DAC960_AllocateCommand allocates a Command structure from Controller's
- free list. During driver initialization, a special initialization command
- has been placed on the free list to guarantee that command allocation can
- never fail.
-*/
-
-static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
- *Controller)
-{
- DAC960_Command_T *Command = Controller->FreeCommands;
- if (Command == NULL) return NULL;
- Controller->FreeCommands = Command->Next;
- Command->Next = NULL;
- return Command;
-}
-
-
-/*
- DAC960_DeallocateCommand deallocates Command, returning it to Controller's
- free list.
-*/
-
-static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
-
- Command->Request = NULL;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
-}
-
-
-/*
- DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
-*/
-
-static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
-{
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
- spin_lock_irq(&Controller->queue_lock);
-}
-
-/*
- DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
-*/
-
-static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
-
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
-
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
-
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
-
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
-
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-/*
- DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
-*/
-
-static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
-*/
-
-static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
-*/
-
-static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
-*/
-
-static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- switch (CommandMailbox->Common.CommandOpcode)
- {
- case DAC960_V1_Enquiry:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
- break;
- case DAC960_V1_GetDeviceState:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
- break;
- case DAC960_V1_Read:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_ExecuteCommand executes Command and waits for completion.
-*/
-
-static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DECLARE_COMPLETION_ONSTACK(Completion);
- unsigned long flags;
- Command->Completion = &Completion;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- if (in_interrupt())
- return;
- wait_for_completion(&Completion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char CommandOpcode2,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
- CommandMailbox->Type3B.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char Channel,
- unsigned char TargetID,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
- Reading IOCTL Command and waits for completion. It returns true on success
- and false on failure.
-
- Return data in The controller's HealthStatusBuffer, which is dma-able memory
-*/
-
-static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
- Information Reading IOCTL Command and waits for completion. It returns
- true on success and false on failure.
-
- Data is returned in the controller's V2.NewControllerInformation dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
- Device Information Reading IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- Data is returned in the controller's V2.NewLogicalDeviceInformation
-*/
-
-static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned short LogicalDeviceNumber)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->LogicalDeviceInfo.CommandOpcode =
- DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
- Physical Device Information" IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- The Channel, TargetID, LogicalUnit arguments should be 0 the first time
- this function is called for a given controller. This will return data
- for the "first" device on that controller. The returned data includes a
- Channel, TargetID, LogicalUnit that can be passed in to this routine to
- get data for the NEXT device on that controller.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-
-*/
-
-static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned char LogicalUnit)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-static void DAC960_V2_ConstructNewUnitSerialNumber(
- DAC960_Controller_T *Controller,
- DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
- int LogicalUnit)
-{
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
- CommandMailbox->SCSI_10.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->SCSI_10.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->SCSI_10.DataTransferSize =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
- CommandMailbox->SCSI_10.CDBLength = 6;
- CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
- CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
- CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
- CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
- CommandMailbox->SCSI_10.SCSI_CDB[4] =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewInquiryUnitSerialNumberDMA;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
-}
-
-
-/*
- DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
- Inquiry command to a SCSI device identified by Channel number,
- Target id, Logical Unit Number. This function Waits for completion
- of the command.
-
- The return data includes Unit Serial Number information for the
- specified device.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
- int Channel, int TargetID, int LogicalUnit)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- Command = DAC960_AllocateCommand(Controller);
- CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Channel, TargetID, LogicalUnit);
-
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
- Operation IOCTL Command and waits for completion. It returns true on
- success and false on failure.
-*/
-
-static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
- DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
- DAC960_V2_OperationDevice_T
- OperationDevice)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->DeviceOperation.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->DeviceOperation.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
- CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V1 Firmware Controllers.
-
- PD and P controller types have no memory mailbox, but still need the
- other dma mapped memory.
-*/
-
-static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_HardwareType_T hw_type = Controller->HardwareType;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- int TimeoutCounter;
- int i;
-
- memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
- CommandMailboxesSize = 0;
- StatusMailboxesSize = 0;
- } else {
- CommandMailboxesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
- }
- DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
- sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
- sizeof(DAC960_V1_RebuildProgress_T) +
- sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
- sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
- sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
- return false;
-
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- goto skip_mailboxes;
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
- Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
- Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
-
-skip_mailboxes:
- Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DCDB_T),
- &Controller->V1.MonitoringDCDB_DMA);
-
- Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_Enquiry_T),
- &Controller->V1.NewEnquiryDMA);
-
- Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_ErrorTable_T),
- &Controller->V1.NewErrorTableDMA);
-
- Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_EventLogEntry_T),
- &Controller->V1.EventLogEntryDMA);
-
- Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_RebuildProgress_T),
- &Controller->V1.RebuildProgressDMA);
-
- Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T),
- &Controller->V1.NewLogicalDriveInformationDMA);
-
- Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T),
- &Controller->V1.BackgroundInitializationStatusDMA);
-
- Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DeviceState_T),
- &Controller->V1.NewDeviceStateDMA);
-
- Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_T),
- &Controller->V1.NewInquiryStandardDataDMA);
-
- Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V1.NewInquiryUnitSerialNumberDMA);
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- return true;
-
- /* Enable the Memory Mailbox Interface. */
- Controller->V1.DualModeMemoryMailboxInterface = true;
- CommandMailbox.TypeX.CommandOpcode = 0x2B;
- CommandMailbox.TypeX.CommandIdentifier = 0;
- CommandMailbox.TypeX.CommandOpcode2 = 0x14;
- CommandMailbox.TypeX.CommandMailboxesBusAddress =
- Controller->V1.FirstCommandMailboxDMA;
- CommandMailbox.TypeX.StatusMailboxesBusAddress =
- Controller->V1.FirstStatusMailboxDMA;
-#define TIMEOUT_COUNT 1000000
-
- for (i = 0; i < 2; i++)
- switch (Controller->HardwareType)
- {
- case DAC960_LA_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_LA_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- case DAC960_PG_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
-
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_PG_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- break;
- }
- return false;
-}
-
-
-/*
- DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V2 Firmware Controllers.
-
- Aggregate the space needed for the controller's memory mailbox and
- the other data structures that will be targets of dma transfers with
- the controller. Allocate a dma-mapped region of memory to hold these
- structures. Then, save CPU pointers and dma_addr_t values to reference
- the structures that are contained in that region.
-*/
-
-static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- dma_addr_t CommandMailboxDMA;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)) &&
- pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- /* This is a temporary dma mapping, used only in the scope of this function */
- CommandMailbox = pci_alloc_consistent(PCI_Device,
- sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
- if (CommandMailbox == NULL)
- return false;
-
- CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
- DmaPagesSize =
- CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V2_HealthStatusBuffer_T) +
- sizeof(DAC960_V2_ControllerInfo_T) +
- sizeof(DAC960_V2_LogicalDeviceInfo_T) +
- sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
- sizeof(DAC960_V2_Event_T) +
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return false;
- }
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
- Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
- Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
-
- Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_HealthStatusBuffer_T),
- &Controller->V2.HealthStatusBufferDMA);
-
- Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_ControllerInfo_T),
- &Controller->V2.NewControllerInformationDMA);
-
- Controller->V2.NewLogicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_LogicalDeviceInfo_T),
- &Controller->V2.NewLogicalDeviceInformationDMA);
-
- Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- &Controller->V2.NewPhysicalDeviceInformationDMA);
-
- Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V2.NewInquiryUnitSerialNumberDMA);
-
- Controller->V2.Event = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_Event_T),
- &Controller->V2.EventDMA);
-
- Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
- &Controller->V2.PhysicalToLogicalDeviceDMA);
-
- /*
- Enable the Memory Mailbox Interface.
-
- I don't know why we can't just use one of the memory mailboxes
- we just allocated to do this, instead of using this temporary one.
- Try this change later.
- */
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
- CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
- (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
- (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
- CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
- Controller->V2.FirstCommandMailboxDMA;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
- Controller->V2.FirstStatusMailboxDMA;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_BA_Controller:
- while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_LP_Controller:
- while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- CommandStatus = DAC960_V2_AbormalCompletion;
- break;
- }
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V1 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V1_Enquiry2_T *Enquiry2;
- dma_addr_t Enquiry2DMA;
- DAC960_V1_Config2_T *Config2;
- dma_addr_t Config2DMA;
- int LogicalDriveNumber, Channel, TargetID;
- struct dma_loaf local_dma;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
-
- Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
- Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
- Controller->V1.NewEnquiryDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY");
- }
- memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "READ CONFIG2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformationDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
-
- for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
- for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
- if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
- Channel, TargetID,
- Controller->V1.NewDeviceStateDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET DEVICE STATE");
- }
- memcpy(&Controller->V1.DeviceState[Channel][TargetID],
- Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
- }
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- switch (Enquiry2->HardwareID.SubModel)
- {
- case DAC960_V1_P_PD_PU:
- if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
- strcpy(Controller->ModelName, "DAC960PU");
- else strcpy(Controller->ModelName, "DAC960PD");
- break;
- case DAC960_V1_PL:
- strcpy(Controller->ModelName, "DAC960PL");
- break;
- case DAC960_V1_PG:
- strcpy(Controller->ModelName, "DAC960PG");
- break;
- case DAC960_V1_PJ:
- strcpy(Controller->ModelName, "DAC960PJ");
- break;
- case DAC960_V1_PR:
- strcpy(Controller->ModelName, "DAC960PR");
- break;
- case DAC960_V1_PT:
- strcpy(Controller->ModelName, "DAC960PT");
- break;
- case DAC960_V1_PTL0:
- strcpy(Controller->ModelName, "DAC960PTL0");
- break;
- case DAC960_V1_PRL:
- strcpy(Controller->ModelName, "DAC960PRL");
- break;
- case DAC960_V1_PTL1:
- strcpy(Controller->ModelName, "DAC960PTL1");
- break;
- case DAC960_V1_1164P:
- strcpy(Controller->ModelName, "DAC1164P");
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "MODEL VERIFICATION");
- }
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field and verify that it
- is a supported firmware version. The supported firmware versions are:
-
- DAC1164P 5.06 and above
- DAC960PTL/PRL/PJ/PG 4.06 and above
- DAC960PU/PD/PL 3.51 and above
- DAC960PU/PD/PL/P 2.73 and above
- */
-#if defined(CONFIG_ALPHA)
- /*
- DEC Alpha machines were often equipped with DAC960 cards that were
- OEMed from Mylex, and had their own custom firmware. Version 2.70,
- the last custom FW revision to be released by DEC for these older
- controllers, appears to work quite well with this driver.
-
- Cards tested successfully were several versions each of the PD and
- PU, called by DEC the KZPSC and KZPAC, respectively, and having
- the Manufacturer Numbers (from Mylex), usually on a sticker on the
- back of the board, of:
-
- KZPSC: D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
- KZPAC: D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
- */
-# define FIRMWARE_27X "2.70"
-#else
-# define FIRMWARE_27X "2.73"
-#endif
-
- if (Enquiry2->FirmwareID.MajorVersion == 0)
- {
- Enquiry2->FirmwareID.MajorVersion =
- Controller->V1.Enquiry.MajorFirmwareVersion;
- Enquiry2->FirmwareID.MinorVersion =
- Controller->V1.Enquiry.MinorFirmwareVersion;
- Enquiry2->FirmwareID.FirmwareType = '0';
- Enquiry2->FirmwareID.TurnID = 0;
- }
- snprintf(Controller->FirmwareVersion, sizeof(Controller->FirmwareVersion),
- "%d.%02d-%c-%02d",
- Enquiry2->FirmwareID.MajorVersion,
- Enquiry2->FirmwareID.MinorVersion,
- Enquiry2->FirmwareID.FirmwareType,
- Enquiry2->FirmwareID.TurnID);
- if (!((Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '3' &&
- strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
- (Controller->FirmwareVersion[0] == '2' &&
- strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
- {
- DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
- DAC960_Error("Firmware Version = '%s'\n", Controller,
- Controller->FirmwareVersion);
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return false;
- }
- /*
- Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
- Enclosure Management Enabled fields.
- */
- Controller->Channels = Enquiry2->ActualChannels;
- Controller->Targets = Enquiry2->MaxTargets;
- Controller->MemorySize = Enquiry2->MemorySize >> 20;
- Controller->V1.SAFTE_EnclosureManagementEnabled =
- (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount =
- Controller->V1.Enquiry.NumberOfLogicalDrives;
- Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
- Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
- /*
- Initialize the Stripe Size, Segment Size, and Geometry Translation.
- */
- Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- switch (Config2->DriveGeometry)
- {
- case DAC960_V1_Geometry_128_32:
- Controller->V1.GeometryTranslationHeads = 128;
- Controller->V1.GeometryTranslationSectors = 32;
- break;
- case DAC960_V1_Geometry_255_63:
- Controller->V1.GeometryTranslationHeads = 255;
- Controller->V1.GeometryTranslationSectors = 63;
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
- }
- /*
- Initialize the Background Initialization Status.
- */
- if ((Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
- (Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.08") >= 0))
- {
- Controller->V1.BackgroundInitializationStatusSupported = true;
- DAC960_V1_ExecuteType3B(Controller,
- DAC960_V1_BackgroundInitializationControl, 0x20,
- Controller->
- V1.BackgroundInitializationStatusDMA);
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- }
- /*
- Initialize the Logical Drive Initially Accessible flag.
- */
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- if (Controller->V1.LogicalDriveInformation
- [LogicalDriveNumber].LogicalDriveState !=
- DAC960_V1_LogicalDrive_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
- Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V2 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned short LogicalDeviceNumber = 0;
- int ModelNameLength;
-
- /* Get data into dma-able area, then copy into permanent location */
- if (!DAC960_V2_NewControllerInfo(Controller))
- return DAC960_Failure(Controller, "GET CONTROLLER INFO");
- memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
- sizeof(DAC960_V2_ControllerInfo_T));
-
-
- if (!DAC960_V2_GeneralInfo(Controller))
- return DAC960_Failure(Controller, "GET HEALTH STATUS");
-
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- ModelNameLength = sizeof(ControllerInfo->ControllerName);
- if (ModelNameLength > sizeof(Controller->ModelName)-1)
- ModelNameLength = sizeof(Controller->ModelName)-1;
- memcpy(Controller->ModelName, ControllerInfo->ControllerName,
- ModelNameLength);
- ModelNameLength--;
- while (Controller->ModelName[ModelNameLength] == ' ' ||
- Controller->ModelName[ModelNameLength] == '\0')
- ModelNameLength--;
- Controller->ModelName[++ModelNameLength] = '\0';
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field.
- */
- sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
- ControllerInfo->FirmwareMajorVersion,
- ControllerInfo->FirmwareMinorVersion,
- ControllerInfo->FirmwareTurnNumber);
- if (ControllerInfo->FirmwareMajorVersion == 6 &&
- ControllerInfo->FirmwareMinorVersion == 0 &&
- ControllerInfo->FirmwareTurnNumber < 1)
- {
- DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
- Controller, Controller->FirmwareVersion);
- DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
- Controller);
- DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
- Controller);
- }
- /*
- Initialize the Controller Channels, Targets, and Memory Size.
- */
- Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
- Controller->Targets =
- ControllerInfo->MaximumTargetsPerChannel
- [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
- Controller->MemorySize = ControllerInfo->MemorySizeMB;
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
- Controller->MaxBlocksPerCommand =
- ControllerInfo->MaximumDataTransferSizeInBlocks;
- Controller->ControllerScatterGatherLimit =
- ControllerInfo->MaximumScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
- /*
- Initialize the Logical Device Information.
- */
- while (true)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
-
- if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
- break;
- LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
- if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
- DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
- Controller, LogicalDeviceNumber);
- break;
- }
- if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
- DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
- Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
- LogicalDeviceNumber++;
- continue;
- }
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- DAC960_V2_LogicalDevice_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- if (LogicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- LogicalDeviceNumber++;
- }
- return true;
-}
-
-
-/*
- DAC960_ReportControllerConfiguration reports the Configuration Information
- for Controller.
-*/
-
-static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
- Controller, Controller->ModelName);
- DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
- Controller, Controller->FirmwareVersion,
- Controller->Channels, Controller->MemorySize);
- DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
- Controller, Controller->Bus,
- Controller->Device, Controller->Function);
- if (Controller->IO_Address == 0)
- DAC960_Info("Unassigned\n", Controller);
- else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
- DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
- Controller, Controller->PCI_Address,
- (unsigned long) Controller->BaseAddress,
- Controller->IRQ_Channel);
- DAC960_Info(" Controller Queue Depth: %d, "
- "Maximum Blocks per Command: %d\n",
- Controller, Controller->ControllerQueueDepth,
- Controller->MaxBlocksPerCommand);
- DAC960_Info(" Driver Queue Depth: %d, "
- "Scatter/Gather Limit: %d of %d Segments\n",
- Controller, Controller->DriverQueueDepth,
- Controller->DriverScatterGatherLimit,
- Controller->ControllerScatterGatherLimit);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, "
- "BIOS Geometry: %d/%d\n", Controller,
- Controller->V1.StripeSize,
- Controller->V1.SegmentSize,
- Controller->V1.GeometryTranslationHeads,
- Controller->V1.GeometryTranslationSectors);
- if (Controller->V1.SAFTE_EnclosureManagementEnabled)
- DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller);
- }
- return true;
-}
-
-
-/*
- DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
- Inquiry Unit Serial Number information for each device connected to
- Controller.
-*/
-
-static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- struct dma_loaf local_dma;
-
- dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
- DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
-
- struct completion Completions[DAC960_V1_MaxChannels];
- unsigned long flags;
- int Channel, TargetID;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
- sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
- return DAC960_Failure(Controller,
- "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
-
- for (Channel = 0; Channel < Controller->Channels; Channel++) {
- DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
- SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_T),
- SCSI_Inquiry_dma + Channel);
- SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- SCSI_NewInquiryUnitSerialNumberDMA + Channel);
- }
-
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- /*
- * For each channel, submit a probe for a device on that channel.
- * The timeout interval for a device that is present is 10 seconds.
- * With this approach, the timeout periods can elapse in parallel
- * on each channel.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- dma_addr_t DCDB_dma = DCDBs_dma[Channel];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- struct completion *Completion = &Completions[Channel];
-
- init_completion(Completion);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- Command->Completion = Completion;
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
- DCDB->Channel = Channel;
- DCDB->TargetID = TargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- /*
- * Wait for the problems submitted in the previous loop
- * to complete. On the probes that are successful,
- * get the serial number of the device that was found.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- SCSI_NewInquiryUnitSerialNumberDMA[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- SCSI_NewInquiryUnitSerialNumberCPU[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- struct completion *Completion = &Completions[Channel];
-
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- continue;
- } else
- memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
-
- /* Preserve Channel and TargetID values from the previous loop */
- Command->Completion = Completion;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- }
- }
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V2 Firmware Controllers by requesting the Physical Device
- Information and SCSI Inquiry Unit Serial Number information for each
- device connected to Controller.
-*/
-
-static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
- unsigned short PhysicalDeviceIndex = 0;
-
- while (true)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
-
- if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
- break;
-
- PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- GFP_ATOMIC);
- if (PhysicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
-
- InquiryUnitSerialNumber = kmalloc(
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL) {
- kfree(PhysicalDeviceInfo);
- return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
- }
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
-
- Channel = NewPhysicalDeviceInfo->Channel;
- TargetID = NewPhysicalDeviceInfo->TargetID;
- LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
-
- /*
- Some devices do NOT have Unit Serial Numbers.
- This command fails for them. But, we still want to
- remember those devices are there. Construct a
- UnitSerialNumber structure for the failure case.
- */
- if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- PhysicalDeviceIndex++;
- LogicalUnit++;
- }
- return true;
-}
-
-
-/*
- DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
- Product Serial Number fields of the Inquiry Standard Data and Inquiry
- Unit Serial Number structures.
-*/
-
-static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
- *InquiryStandardData,
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber,
- unsigned char *Vendor,
- unsigned char *Model,
- unsigned char *Revision,
- unsigned char *SerialNumber)
-{
- int SerialNumberLength, i;
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
- for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
- {
- unsigned char VendorCharacter =
- InquiryStandardData->VendorIdentification[i];
- Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
- ? VendorCharacter : ' ');
- }
- Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
- {
- unsigned char ModelCharacter =
- InquiryStandardData->ProductIdentification[i];
- Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
- ? ModelCharacter : ' ');
- }
- Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
- {
- unsigned char RevisionCharacter =
- InquiryStandardData->ProductRevisionLevel[i];
- Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
- ? RevisionCharacter : ' ');
- }
- Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
- if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
- SerialNumberLength = InquiryUnitSerialNumber->PageLength;
- if (SerialNumberLength >
- sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
- SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
- for (i = 0; i < SerialNumberLength; i++)
- {
- unsigned char SerialNumberCharacter =
- InquiryUnitSerialNumber->ProductSerialNumber[i];
- SerialNumber[i] =
- (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
- ? SerialNumberCharacter : ' ');
- }
- SerialNumber[SerialNumberLength] = '\0';
-}
-
-
-/*
- DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V1 Firmware Controllers.
-*/
-
-static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int LogicalDriveNumber, Channel, TargetID;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *ErrorEntry =
- &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber
- ->ProductSerialNumber)];
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType)
- {
- if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
- DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n",
- Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize,
- Controller->V1.DeviceResetCount[Channel][TargetID]);
- else
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize);
- }
- if (ErrorEntry->ParityErrorCount > 0 ||
- ErrorEntry->SoftErrorCount > 0 ||
- ErrorEntry->HardErrorCount > 0 ||
- ErrorEntry->MiscErrorCount > 0)
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- ErrorEntry->ParityErrorCount,
- ErrorEntry->SoftErrorCount,
- ErrorEntry->HardErrorCount,
- ErrorEntry->MiscErrorCount);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDriveInformation->RAIDLevel,
- (LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "Online"
- : LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "Critical" : "Offline"),
- LogicalDriveInformation->LogicalDriveSize,
- (LogicalDriveInformation->WriteBack
- ? "Write Back" : "Write Thru"));
- }
- return true;
-}
-
-
-/*
- DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V2 Firmware Controllers.
-*/
-
-static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int PhysicalDeviceIndex, LogicalDriveNumber;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (PhysicalDeviceIndex = 0;
- PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
- PhysicalDeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
- DAC960_Info(" %sAsynchronous\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""));
- else
- DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""),
- (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
- * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (PhysicalDeviceInfo->PhysicalDeviceState ==
- DAC960_V2_Device_Unconfigured)
- continue;
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "Online"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "Rebuild"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "Missing"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "Critical"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "Suspected-Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "Commanded-Offline"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "Standby" : "Unknown"),
- PhysicalDeviceInfo->ConfigurableDeviceSize);
- if (PhysicalDeviceInfo->ParityErrors == 0 &&
- PhysicalDeviceInfo->SoftErrors == 0 &&
- PhysicalDeviceInfo->HardErrors == 0 &&
- PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
- PhysicalDeviceInfo->CommandTimeouts == 0 &&
- PhysicalDeviceInfo->Retries == 0 &&
- PhysicalDeviceInfo->Aborts == 0 &&
- PhysicalDeviceInfo->PredictedFailuresDetected == 0)
- continue;
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- PhysicalDeviceInfo->ParityErrors,
- PhysicalDeviceInfo->SoftErrors,
- PhysicalDeviceInfo->HardErrors,
- PhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Info(" Timeouts: %d, Retries: %d, "
- "Aborts: %d, Predicted: %d\n", Controller,
- PhysicalDeviceInfo->CommandTimeouts,
- PhysicalDeviceInfo->Retries,
- PhysicalDeviceInfo->Aborts,
- PhysicalDeviceInfo->PredictedFailuresDetected);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- static const unsigned char *ReadCacheStatus[] = {
- "Read Cache Disabled",
- "Read Cache Enabled",
- "Read Ahead Enabled",
- "Intelligent Read Ahead Enabled",
- "-", "-", "-", "-"
- };
- static const unsigned char *WriteCacheStatus[] = {
- "Write Cache Disabled",
- "Logical Device Read Only",
- "Write Cache Enabled",
- "Intelligent Write Cache Enabled",
- "-", "-", "-", "-"
- };
- unsigned char *GeometryTranslation;
- if (LogicalDeviceInfo == NULL) continue;
- switch (LogicalDeviceInfo->DriveGeometry)
- {
- case DAC960_V2_Geometry_128_32:
- GeometryTranslation = "128/32";
- break;
- case DAC960_V2_Geometry_255_63:
- GeometryTranslation = "255/63";
- break;
- default:
- GeometryTranslation = "Invalid";
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- Controller, LogicalDeviceInfo->DriveGeometry);
- break;
- }
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDeviceInfo->RAIDLevel,
- (LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "Online"
- : LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "Critical" : "Offline"),
- LogicalDeviceInfo->ConfigurableDeviceSize);
- DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n",
- Controller,
- (LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Initialized" : "Uninitialized"),
- GeometryTranslation);
- if (LogicalDeviceInfo->StripeSize == 0)
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: N/A\n", Controller);
- else
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- else
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: N/A\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2));
- else
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2),
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- DAC960_Info(" %s, %s\n", Controller,
- ReadCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
- WriteCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
- if (LogicalDeviceInfo->SoftErrors > 0 ||
- LogicalDeviceInfo->CommandsFailed > 0 ||
- LogicalDeviceInfo->DeferredWriteErrors)
- DAC960_Info(" Errors - Soft: %d, Failed: %d, "
- "Deferred Write: %d\n", Controller,
- LogicalDeviceInfo->SoftErrors,
- LogicalDeviceInfo->CommandsFailed,
- LogicalDeviceInfo->DeferredWriteErrors);
-
- }
- return true;
-}
-
-/*
- DAC960_RegisterBlockDevice registers the Block Device structures
- associated with Controller.
-*/
-
-static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int n;
-
- /*
- Register the Block Device Major Number for this DAC960 Controller.
- */
- if (register_blkdev(MajorNumber, "dac960") < 0)
- return false;
-
- for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
- struct gendisk *disk = Controller->disks[n];
- struct request_queue *RequestQueue;
-
- /* for now, let all request queues share controller's lock */
- RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
- if (!RequestQueue) {
- printk("DAC960: failure to allocate request queue\n");
- continue;
- }
- Controller->RequestQueue[n] = RequestQueue;
- RequestQueue->queuedata = Controller;
- blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
- disk->queue = RequestQueue;
- sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
- disk->major = MajorNumber;
- disk->first_minor = n << DAC960_MaxPartitionsBits;
- disk->fops = &DAC960_BlockDeviceOperations;
- }
- /*
- Indicate the Block Device Registration completed successfully,
- */
- return true;
-}
-
-
-/*
- DAC960_UnregisterBlockDevice unregisters the Block Device structures
- associated with Controller.
-*/
-
-static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int disk;
-
- /* does order matter when deleting gendisk and cleanup in request queue? */
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- del_gendisk(Controller->disks[disk]);
- blk_cleanup_queue(Controller->RequestQueue[disk]);
- Controller->RequestQueue[disk] = NULL;
- }
-
- /*
- Unregister the Block Device Major Number for this DAC960 Controller.
- */
- unregister_blkdev(MajorNumber, "dac960");
-}
-
-/*
- DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
- Information Partition Sector Counts and Block Sizes.
-*/
-
-static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
-{
- int disk;
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
-}
-
-/*
- DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
- the Error Status Register when the driver performs the BIOS handshaking.
- It returns true for fatal errors and false otherwise.
-*/
-
-static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
- unsigned char ErrorStatus,
- unsigned char Parameter0,
- unsigned char Parameter1)
-{
- switch (ErrorStatus)
- {
- case 0x00:
- DAC960_Notice("Physical Device %d:%d Not Responding\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0x08:
- if (Controller->DriveSpinUpMessageDisplayed) break;
- DAC960_Notice("Spinning Up Drives\n", Controller);
- Controller->DriveSpinUpMessageDisplayed = true;
- break;
- case 0x30:
- DAC960_Notice("Configuration Checksum Error\n", Controller);
- break;
- case 0x60:
- DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
- break;
- case 0x70:
- DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
- break;
- case 0x90:
- DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0xA0:
- DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
- break;
- case 0xB0:
- DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
- break;
- case 0xD0:
- DAC960_Notice("New Controller Configuration Found\n", Controller);
- break;
- case 0xF0:
- DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
- return true;
- default:
- DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
- Controller, ErrorStatus);
- return true;
- }
- return false;
-}
-
-
-/*
- * DAC960_DetectCleanup releases the resources that were allocated
- * during DAC960_DetectController(). DAC960_DetectController can
- * has several internal failure points, so not ALL resources may
- * have been allocated. It's important to free only
- * resources that HAVE been allocated. The code below always
- * tests that the resource has been allocated before attempting to
- * free it.
- */
-static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
-{
- int i;
-
- /* Free the memory mailbox, status, and related structures */
- free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
- if (Controller->MemoryMappedAddress) {
- switch(Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PD_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_P_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- }
- iounmap(Controller->MemoryMappedAddress);
- }
- if (Controller->IRQ_Channel)
- free_irq(Controller->IRQ_Channel, Controller);
- if (Controller->IO_Address)
- release_region(Controller->IO_Address, 0x80);
- pci_disable_device(Controller->PCIDevice);
- for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
- put_disk(Controller->disks[i]);
- DAC960_Controllers[Controller->ControllerNumber] = NULL;
- kfree(Controller);
-}
-
-
-/*
- DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
- PCI RAID Controllers by interrogating the PCI Configuration Space for
- Controller Type.
-*/
-
-static DAC960_Controller_T *
-DAC960_DetectController(struct pci_dev *PCI_Device,
- const struct pci_device_id *entry)
-{
- struct DAC960_privdata *privdata =
- (struct DAC960_privdata *)entry->driver_data;
- irq_handler_t InterruptHandler = privdata->InterruptHandler;
- unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
- DAC960_Controller_T *Controller = NULL;
- unsigned char DeviceFunction = PCI_Device->devfn;
- unsigned char ErrorStatus, Parameter0, Parameter1;
- unsigned int IRQ_Channel;
- void __iomem *BaseAddress;
- int i;
-
- Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
- if (Controller == NULL) {
- DAC960_Error("Unable to allocate Controller structure for "
- "Controller at\n", NULL);
- return NULL;
- }
- Controller->ControllerNumber = DAC960_ControllerCount;
- DAC960_Controllers[DAC960_ControllerCount++] = Controller;
- Controller->Bus = PCI_Device->bus->number;
- Controller->FirmwareType = privdata->FirmwareType;
- Controller->HardwareType = privdata->HardwareType;
- Controller->Device = DeviceFunction >> 3;
- Controller->Function = DeviceFunction & 0x7;
- Controller->PCIDevice = PCI_Device;
- strcpy(Controller->FullModelName, "DAC960");
-
- if (pci_enable_device(PCI_Device))
- goto Failure;
-
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_BA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LP_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PG_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PD_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- case DAC960_P_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- }
-
- pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
- if (!Controller->disks[i])
- goto Failure;
- Controller->disks[i]->private_data = (void *)((long)i);
- }
- init_waitqueue_head(&Controller->CommandWaitQueue);
- init_waitqueue_head(&Controller->HealthStatusWaitQueue);
- spin_lock_init(&Controller->queue_lock);
- DAC960_AnnounceDriver(Controller);
- /*
- Map the Controller Register Window.
- */
- if (MemoryWindowSize < PAGE_SIZE)
- MemoryWindowSize = PAGE_SIZE;
- Controller->MemoryMappedAddress =
- ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
- Controller->BaseAddress =
- Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
- if (Controller->MemoryMappedAddress == NULL)
- {
- DAC960_Error("Unable to map Controller Register Window for "
- "Controller at\n", Controller);
- goto Failure;
- }
- BaseAddress = Controller->BaseAddress;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(BaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_GEM_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_GEM_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_GEM_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(BaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_BA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_BA_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_BA_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(BaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LP_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LP_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_LP_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(BaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LA_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(BaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PG_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PG_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PD_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)) {
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_PD_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_P_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)){
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory"
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_P_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- }
- /*
- Acquire shared access to the IRQ Channel.
- */
- IRQ_Channel = PCI_Device->irq;
- if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
- Controller->FullModelName, Controller) < 0)
- {
- DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
- Controller, Controller->IRQ_Channel);
- goto Failure;
- }
- Controller->IRQ_Channel = IRQ_Channel;
- Controller->InitialCommand.CommandIdentifier = 1;
- Controller->InitialCommand.Controller = Controller;
- Controller->Commands[0] = &Controller->InitialCommand;
- Controller->FreeCommands = &Controller->InitialCommand;
- return Controller;
-
-Failure:
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_DetectCleanup(Controller);
- DAC960_ControllerCount--;
- return NULL;
-}
-
-/*
- DAC960_InitializeController initializes Controller.
-*/
-
-static bool
-DAC960_InitializeController(DAC960_Controller_T *Controller)
-{
- if (DAC960_ReadControllerConfiguration(Controller) &&
- DAC960_ReportControllerConfiguration(Controller) &&
- DAC960_CreateAuxiliaryStructures(Controller) &&
- DAC960_ReadDeviceConfiguration(Controller) &&
- DAC960_ReportDeviceConfiguration(Controller) &&
- DAC960_RegisterBlockDevice(Controller))
- {
- /*
- Initialize the Monitoring Timer.
- */
- timer_setup(&Controller->MonitoringTimer,
- DAC960_MonitoringTimerFunction, 0);
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- Controller->ControllerInitialized = true;
- return true;
- }
- return false;
-}
-
-
-/*
- DAC960_FinalizeController finalizes Controller.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerInitialized)
- {
- unsigned long flags;
-
- /*
- * Acquiring and releasing lock here eliminates
- * a very low probability race.
- *
- * The code below allocates controller command structures
- * from the free list without holding the controller lock.
- * This is safe assuming there is no other activity on
- * the controller at the time.
- *
- * But, there might be a monitoring command still
- * in progress. Setting the Shutdown flag while holding
- * the lock ensures that there is no monitoring command
- * in the interrupt handler currently, and any monitoring
- * commands that complete from this time on will NOT return
- * their command structure to the free list.
- */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- Controller->ShutdownMonitoringTimer = 1;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- del_timer_sync(&Controller->MonitoringTimer);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
- DAC960_Notice("done\n", Controller);
-
- if (Controller->HardwareType == DAC960_PD_Controller)
- release_region(Controller->IO_Address, 0x80);
- }
- else
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
- DAC960_V2_RAID_Controller);
- DAC960_Notice("done\n", Controller);
- }
- }
- DAC960_UnregisterBlockDevice(Controller);
- DAC960_DestroyAuxiliaryStructures(Controller);
- DAC960_DestroyProcEntries(Controller);
- DAC960_DetectCleanup(Controller);
-}
-
-
-/*
- DAC960_Probe verifies controller's existence and
- initializes the DAC960 Driver for that controller.
-*/
-
-static int
-DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
-{
- int disk;
- DAC960_Controller_T *Controller;
-
- if (DAC960_ControllerCount == DAC960_MaxControllers)
- {
- DAC960_Error("More than %d DAC960 Controllers detected - "
- "ignoring from Controller at\n",
- NULL, DAC960_MaxControllers);
- return -ENODEV;
- }
-
- Controller = DAC960_DetectController(dev, entry);
- if (!Controller)
- return -ENODEV;
-
- if (!DAC960_InitializeController(Controller)) {
- DAC960_FinalizeController(Controller);
- return -ENODEV;
- }
-
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
- add_disk(Controller->disks[disk]);
- }
- DAC960_CreateProcEntries(Controller);
- return 0;
-}
-
-
-/*
- DAC960_Finalize finalizes the DAC960 Driver.
-*/
-
-static void DAC960_Remove(struct pci_dev *PCI_Device)
-{
- int Controller_Number = (long)pci_get_drvdata(PCI_Device);
- DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
- if (Controller != NULL)
- DAC960_FinalizeController(Controller);
-}
-
-
-/*
- DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
- Command->V1.ScatterGatherList;
- struct scatterlist *ScatterList = Command->V1.ScatterList;
-
- DAC960_V1_ClearCommand(Command);
-
- if (Command->SegmentCount == 1)
- {
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- }
- else
- {
- int i;
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
-
- CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- struct scatterlist *ScatterList = Command->V2.ScatterList;
-
- DAC960_V2_ClearCommand(Command);
-
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
- CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE);
- CommandMailbox->SCSI_10.DataTransferSize =
- Command->BlockCount << DAC960_BlockSizeBits;
- CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
- CommandMailbox->SCSI_10.PhysicalDevice =
- Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
- CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
- CommandMailbox->SCSI_10.CDBLength = 10;
- CommandMailbox->SCSI_10.SCSI_CDB[0] =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
- CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
- CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
- CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
- CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
-
- if (Command->SegmentCount == 1)
- {
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
- }
- else
- {
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- int i;
-
- if (Command->SegmentCount > 2)
- {
- ScatterGatherList = Command->V2.ScatterGatherList;
- CommandMailbox->SCSI_10.CommandControlBits
- .AdditionalScatterGatherListMemory = true;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Address =
- Command->V2.ScatterGatherListDMA;
- }
- else
- ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
-{
- struct request *Request;
- DAC960_Command_T *Command;
-
- while(1) {
- Request = blk_peek_request(req_q);
- if (!Request)
- return 1;
-
- Command = DAC960_AllocateCommand(Controller);
- if (Command == NULL)
- return 0;
-
- if (rq_data_dir(Request) == READ) {
- Command->DmaDirection = PCI_DMA_FROMDEVICE;
- Command->CommandType = DAC960_ReadCommand;
- } else {
- Command->DmaDirection = PCI_DMA_TODEVICE;
- Command->CommandType = DAC960_WriteCommand;
- }
- Command->Completion = Request->end_io_data;
- Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = blk_rq_sectors(Request);
- Command->Request = Request;
- blk_start_request(Request);
- Command->SegmentCount = blk_rq_map_sg(req_q,
- Command->Request, Command->cmd_sglist);
- /* pci_map_sg MAY change the value of SegCount */
- Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- DAC960_QueueReadWriteCommand(Command);
- }
-}
-
-/*
- DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
- I/O Request Queue and queues it to the Controller. WaitForCommand is true if
- this function should wait for a Command to become available if necessary.
- This function returns true if an I/O Request was queued and false otherwise.
-*/
-static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
-{
- int i;
-
- if (!controller->ControllerInitialized)
- return;
-
- /* Do this better later! */
- for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-
- if (controller->req_q_index == 0)
- return;
-
- for (i = 0; i < controller->req_q_index; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-}
-
-
-/*
- DAC960_queue_partial_rw extracts one bio from the request already
- associated with argument command, and construct a new command block to retry I/O
- only on that bio. Queue that command to the controller.
-
- This function re-uses a previously-allocated Command,
- there is no failure mode from trying to allocate a command.
-*/
-
-static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- struct request *Request = Command->Request;
- struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- Command->CommandType = DAC960_ReadRetryCommand;
- else
- Command->CommandType = DAC960_WriteRetryCommand;
-
- /*
- * We could be more efficient with these mapping requests
- * and map only the portions that we need. But since this
- * code should almost never be called, just go with a
- * simple coding.
- */
- (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
-
- (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
- /*
- * Resubmitting the request sector at a time is really tedious.
- * But, this should almost never happen. So, we're willing to pay
- * this price so that in the end, as much of the transfer is completed
- * successfully as possible.
- */
- Command->SegmentCount = 1;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = 1;
- DAC960_QueueReadWriteCommand(Command);
- return;
-}
-
-/*
- DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
-*/
-
-static void DAC960_RequestFunction(struct request_queue *RequestQueue)
-{
- DAC960_ProcessRequest(RequestQueue->queuedata);
-}
-
-/*
- DAC960_ProcessCompletedBuffer performs completion processing for an
- individual Buffer.
-*/
-
-static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
- bool SuccessfulIO)
-{
- struct request *Request = Command->Request;
- blk_status_t Error = SuccessfulIO ? BLK_STS_OK : BLK_STS_IOERR;
-
- pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
- if (Command->Completion) {
- complete(Command->Completion);
- Command->Completion = NULL;
- }
- return true;
- }
- return false;
-}
-
-/*
- DAC960_V1_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_IrrecoverableDataError:
- DAC960_Error("Irrecoverable Data Error on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_LogicalDriveNonexistentOrOffline:
- DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_AccessBeyondEndOfLogicalDrive:
- DAC960_Error("Attempt to Access Beyond End of Logical Drive "
- "on %s:\n", Controller, CommandName);
- break;
- case DAC960_V1_BadDataEncountered:
- DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
- break;
- default:
- DAC960_Error("Unexpected Error Status %04X on %s:\n",
- Controller, Command->V1.CommandStatus, CommandName);
- break;
- }
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V1_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- Command->V1.CommandMailbox.Common.CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V1_IrrecoverableDataError;
-#endif
-
- if (CommandStatus == DAC960_V1_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
- CommandStatus == DAC960_V1_BadDataEncountered)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
-
- if (!DAC960_ProcessCompletedRequest(Command, false))
- BUG();
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V1_NormalCompletion) {
- normal_completion = false;
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V1 error retry failure test\n");
- normal_completion = false;
- DAC960_V1_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
-
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (CommandOpcode == DAC960_V1_Enquiry)
- {
- DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
- unsigned int OldCriticalLogicalDriveCount =
- OldEnquiry->CriticalLogicalDriveCount;
- unsigned int NewCriticalLogicalDriveCount =
- NewEnquiry->CriticalLogicalDriveCount;
- if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
- while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
- while (++LogicalDriveNumber < Controller->LogicalDriveCount)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->StatusFlags.DeferredWriteError !=
- OldEnquiry->StatusFlags.DeferredWriteError)
- DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
- (NewEnquiry->StatusFlags.DeferredWriteError
- ? "TRUE" : "FALSE"));
- if ((NewCriticalLogicalDriveCount > 0 ||
- NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
- (NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount !=
- OldEnquiry->OfflineLogicalDriveCount) ||
- (NewEnquiry->DeadDriveCount > 0 ||
- NewEnquiry->DeadDriveCount !=
- OldEnquiry->DeadDriveCount) ||
- (NewEnquiry->EventLogSequenceNumber !=
- OldEnquiry->EventLogSequenceNumber) ||
- Controller->MonitoringTimerCount == 0 ||
- time_after_eq(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- Controller->V1.NeedLogicalDriveInformation = true;
- Controller->V1.NewEventLogSequenceNumber =
- NewEnquiry->EventLogSequenceNumber;
- Controller->V1.NeedErrorTableInformation = true;
- Controller->V1.NeedDeviceStateInformation = true;
- Controller->V1.StartDeviceStateScan = true;
- Controller->V1.NeedBackgroundInitializationStatus =
- Controller->V1.BackgroundInitializationStatusSupported;
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
- {
- Controller->V1.NeedRebuildProgress = true;
- Controller->V1.RebuildProgressFirst =
- (NewEnquiry->CriticalLogicalDriveCount <
- OldEnquiry->CriticalLogicalDriveCount);
- }
- if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
- switch (NewEnquiry->RebuildFlag)
- {
- case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
- DAC960_Progress("Consistency Check Completed Successfully\n",
- Controller);
- break;
- case DAC960_V1_StandbyRebuildInProgress:
- case DAC960_V1_BackgroundRebuildInProgress:
- break;
- case DAC960_V1_BackgroundCheckInProgress:
- Controller->V1.NeedConsistencyCheckProgress = true;
- break;
- case DAC960_V1_StandbyRebuildCompletedWithError:
- DAC960_Progress("Consistency Check Completed with Error\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Physical Device Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Logical Drive Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
- DAC960_Progress("Consistency Check Failed - Other Causes\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
- DAC960_Progress("Consistency Check Successfully Terminated\n",
- Controller);
- break;
- }
- else if (NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundCheckInProgress)
- Controller->V1.NeedConsistencyCheckProgress = true;
- Controller->MonitoringAlertMode =
- (NewEnquiry->CriticalLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->DeadDriveCount > 0);
- if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
- {
- Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
- Controller->V1.RebuildFlagPending = true;
- }
- memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
- }
- else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
- {
- static char
- *DAC960_EventMessages[] =
- { "killed because write recovery failed",
- "killed because of SCSI bus reset failure",
- "killed because of double check condition",
- "killed because it was removed",
- "killed because of gross error on SCSI chip",
- "killed because of bad tag returned from drive",
- "killed because of timeout on SCSI command",
- "killed because of reset SCSI command issued from system",
- "killed because busy or parity error count exceeded limit",
- "killed because of 'kill drive' command from system",
- "killed because of selection timeout",
- "killed due to SCSI phase sequence error",
- "killed due to unknown status" };
- DAC960_V1_EventLogEntry_T *EventLogEntry =
- Controller->V1.EventLogEntry;
- if (EventLogEntry->SequenceNumber ==
- Controller->V1.OldEventLogSequenceNumber)
- {
- unsigned char SenseKey = EventLogEntry->SenseKey;
- unsigned char AdditionalSenseCode =
- EventLogEntry->AdditionalSenseCode;
- unsigned char AdditionalSenseCodeQualifier =
- EventLogEntry->AdditionalSenseCodeQualifier;
- if (SenseKey == DAC960_SenseKey_VendorSpecific &&
- AdditionalSenseCode == 0x80 &&
- AdditionalSenseCodeQualifier <
- ARRAY_SIZE(DAC960_EventMessages))
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- DAC960_EventMessages[
- AdditionalSenseCodeQualifier]);
- else if (SenseKey == DAC960_SenseKey_UnitAttention &&
- AdditionalSenseCode == 0x29)
- {
- if (Controller->MonitoringTimerCount > 0)
- Controller->V1.DeviceResetCount[EventLogEntry->Channel]
- [EventLogEntry->TargetID]++;
- }
- else if (!(SenseKey == DAC960_SenseKey_NoSense ||
- (SenseKey == DAC960_SenseKey_NotReady &&
- AdditionalSenseCode == 0x04 &&
- (AdditionalSenseCodeQualifier == 0x01 ||
- AdditionalSenseCodeQualifier == 0x02))))
- {
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- SenseKey,
- AdditionalSenseCode,
- AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- EventLogEntry->Information[0],
- EventLogEntry->Information[1],
- EventLogEntry->Information[2],
- EventLogEntry->Information[3],
- EventLogEntry->CommandSpecificInformation[0],
- EventLogEntry->CommandSpecificInformation[1],
- EventLogEntry->CommandSpecificInformation[2],
- EventLogEntry->CommandSpecificInformation[3]);
- }
- }
- Controller->V1.OldEventLogSequenceNumber++;
- }
- else if (CommandOpcode == DAC960_V1_GetErrorTable)
- {
- DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
- int Channel, TargetID;
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
- &NewErrorTable->ErrorTableEntries[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
- &OldErrorTable->ErrorTableEntries[Channel][TargetID];
- if ((NewErrorEntry->ParityErrorCount !=
- OldErrorEntry->ParityErrorCount) ||
- (NewErrorEntry->SoftErrorCount !=
- OldErrorEntry->SoftErrorCount) ||
- (NewErrorEntry->HardErrorCount !=
- OldErrorEntry->HardErrorCount) ||
- (NewErrorEntry->MiscErrorCount !=
- OldErrorEntry->MiscErrorCount))
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller, Channel, TargetID,
- NewErrorEntry->ParityErrorCount,
- NewErrorEntry->SoftErrorCount,
- NewErrorEntry->HardErrorCount,
- NewErrorEntry->MiscErrorCount);
- }
- memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
- sizeof(DAC960_V1_ErrorTable_T));
- }
- else if (CommandOpcode == DAC960_V1_GetDeviceState)
- {
- DAC960_V1_DeviceState_T *OldDeviceState =
- &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- DAC960_V1_DeviceState_T *NewDeviceState =
- Controller->V1.NewDeviceState;
- if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
- DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
- Controller->V1.DeviceStateChannel,
- Controller->V1.DeviceStateTargetID,
- (NewDeviceState->DeviceState
- == DAC960_V1_Device_Dead
- ? "DEAD"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "WRITE-ONLY"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "ONLINE" : "STANDBY"));
- if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
- NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
- {
- Controller->V1.NeedDeviceInquiryInformation = true;
- Controller->V1.NeedDeviceSerialNumberInformation = true;
- Controller->V1.DeviceResetCount
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID] = 0;
- }
- memcpy(OldDeviceState, NewDeviceState,
- sizeof(DAC960_V1_DeviceState_T));
- }
- else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
- &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
- if (NewLogicalDriveInformation->LogicalDriveState !=
- OldLogicalDriveInformation->LogicalDriveState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "ONLINE"
- : NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "CRITICAL" : "OFFLINE"));
- if (NewLogicalDriveInformation->WriteBack !=
- OldLogicalDriveInformation->WriteBack)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->WriteBack
- ? "WRITE BACK" : "WRITE THRU"));
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
- }
- else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
- Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
- CommandStatus = DAC960_V1_RebuildSuccessful;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Rebuild in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_RebuildFailed_LogicalDriveFailure:
- DAC960_Progress("Rebuild Failed due to "
- "Logical Drive Failure\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_BadBlocksOnOther:
- DAC960_Progress("Rebuild Failed due to "
- "Bad Blocks on Other Drives\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_NewDriveFailed:
- DAC960_Progress("Rebuild Failed due to "
- "Failure of Drive Being Rebuilt\n", Controller);
- break;
- case DAC960_V1_NoRebuildOrCheckInProgress:
- break;
- case DAC960_V1_RebuildSuccessful:
- DAC960_Progress("Rebuild Completed Successfully\n", Controller);
- break;
- case DAC960_V1_RebuildSuccessfullyTerminated:
- DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
- break;
- }
- Controller->V1.LastRebuildStatus = CommandStatus;
- if (CommandType != DAC960_MonitoringCommand &&
- Controller->V1.RebuildStatusPending)
- {
- Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
- Controller->V1.RebuildStatusPending = false;
- }
- else if (CommandType == DAC960_MonitoringCommand &&
- CommandStatus != DAC960_V1_NormalCompletion &&
- CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
- {
- Controller->V1.PendingRebuildStatus = CommandStatus;
- Controller->V1.RebuildStatusPending = true;
- }
- }
- else if (CommandOpcode == DAC960_V1_RebuildStat)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NormalCompletion)
- {
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Consistency Check in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- }
- }
- else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
- unsigned int BlocksCompleted =
- Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- switch (Controller->V1.BackgroundInitializationStatus->Status)
- {
- case DAC960_V1_BackgroundInitializationInvalid:
- break;
- case DAC960_V1_BackgroundInitializationStarted:
- DAC960_Progress("Background Initialization Started\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationInProgress:
- if (BlocksCompleted ==
- Controller->V1.LastBackgroundInitializationStatus.
- BlocksCompleted &&
- LogicalDriveNumber ==
- Controller->V1.LastBackgroundInitializationStatus.
- LogicalDriveNumber)
- break;
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Background Initialization in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_BackgroundInitializationSuspended:
- DAC960_Progress("Background Initialization Suspended\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationCancelled:
- DAC960_Progress("Background Initialization Cancelled\n",
- Controller);
- break;
- }
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- break;
- case DAC960_V1_BackgroundInitSuccessful:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization "
- "Completed Successfully\n", Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_BackgroundInitAborted:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization Aborted\n",
- Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_NoBackgroundInitInProgress:
- break;
- }
- }
- else if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- This is a bit ugly.
-
- The InquiryStandardData and
- the InquiryUntitSerialNumber information
- retrieval operations BOTH use the DAC960_V1_DCDB
- commands. the test above can't distinguish between
- these two cases.
-
- Instead, we rely on the order of code later in this
- function to ensure that DeviceInquiryInformation commands
- are submitted before DeviceSerialNumber commands.
- */
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryStandardData, 0,
- sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryStandardData,
- Controller->V1.NewInquiryStandardData,
- sizeof(DAC960_SCSI_Inquiry_T));
- Controller->V1.NeedDeviceInquiryInformation = false;
- }
- else if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryUnitSerialNumber,
- Controller->V1.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- Controller->V1.NeedDeviceSerialNumberInformation = false;
- }
- }
- /*
- Begin submitting new monitoring commands.
- */
- if (Controller->V1.NewEventLogSequenceNumber
- - Controller->V1.OldEventLogSequenceNumber > 0)
- {
- Command->V1.CommandMailbox.Type3E.CommandOpcode =
- DAC960_V1_PerformEventLogOperation;
- Command->V1.CommandMailbox.Type3E.OperationType =
- DAC960_V1_GetEventLogEntry;
- Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
- Command->V1.CommandMailbox.Type3E.SequenceNumber =
- Controller->V1.OldEventLogSequenceNumber;
- Command->V1.CommandMailbox.Type3E.BusAddress =
- Controller->V1.EventLogEntryDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedErrorTableInformation)
- {
- Controller->V1.NeedErrorTableInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetErrorTable;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewErrorTableDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress &&
- Controller->V1.RebuildProgressFirst)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceStateInformation)
- {
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
-
- dma_addr_t NewInquiryStandardDataDMA =
- Controller->V1.NewInquiryStandardDataDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- Controller->V1.NewInquiryUnitSerialNumberDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.StartDeviceStateScan)
- {
- Controller->V1.DeviceStateChannel = 0;
- Controller->V1.DeviceStateTargetID = 0;
- Controller->V1.StartDeviceStateScan = false;
- }
- else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
- {
- Controller->V1.DeviceStateChannel++;
- Controller->V1.DeviceStateTargetID = 0;
- }
- if (Controller->V1.DeviceStateChannel < Controller->Channels)
- {
- Controller->V1.NewDeviceState->DeviceState =
- DAC960_V1_Device_Dead;
- Command->V1.CommandMailbox.Type3D.CommandOpcode =
- DAC960_V1_GetDeviceState;
- Command->V1.CommandMailbox.Type3D.Channel =
- Controller->V1.DeviceStateChannel;
- Command->V1.CommandMailbox.Type3D.TargetID =
- Controller->V1.DeviceStateTargetID;
- Command->V1.CommandMailbox.Type3D.BusAddress =
- Controller->V1.NewDeviceStateDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->V1.NeedDeviceStateInformation = false;
- }
- if (Controller->V1.NeedLogicalDriveInformation)
- {
- Controller->V1.NeedLogicalDriveInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetLogicalDriveInformation;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewLogicalDriveInformationDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedConsistencyCheckProgress)
- {
- Controller->V1.NeedConsistencyCheckProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_RebuildStat;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedBackgroundInitializationStatus)
- {
- Controller->V1.NeedBackgroundInitializationStatus = false;
- Command->V1.CommandMailbox.Type3B.CommandOpcode =
- DAC960_V1_BackgroundInitializationControl;
- Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
- Command->V1.CommandMailbox.Type3B.BusAddress =
- Controller->V1.BackgroundInitializationStatusDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
- KernelCommand->CommandStatus = Command->V1.CommandStatus;
- Command->V1.KernelCommand = NULL;
- if (CommandOpcode == DAC960_V1_DCDB)
- Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
- [KernelCommand->DCDB->TargetID] =
- false;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V1_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-
-/*
- DAC960_V2_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- static const unsigned char *SenseErrors[] = {
- "NO SENSE", "RECOVERED ERROR",
- "NOT READY", "MEDIUM ERROR",
- "HARDWARE ERROR", "ILLEGAL REQUEST",
- "UNIT ATTENTION", "DATA PROTECT",
- "BLANK CHECK", "VENDOR-SPECIFIC",
- "COPY ABORTED", "ABORTED COMMAND",
- "EQUAL", "VOLUME OVERFLOW",
- "MISCOMPARE", "RESERVED"
- };
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- DAC960_Error("Error Condition %s on %s:\n", Controller,
- SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
- occurs.
-*/
-
-static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
- DAC960_V2_Event_T *Event)
-{
- DAC960_SCSI_RequestSense_T *RequestSense =
- (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
- unsigned char MessageBuffer[DAC960_LineBufferSize];
- static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
- { /* Physical Device Events (0x0000 - 0x007F) */
- { 0x0001, "P Online" },
- { 0x0002, "P Standby" },
- { 0x0005, "P Automatic Rebuild Started" },
- { 0x0006, "P Manual Rebuild Started" },
- { 0x0007, "P Rebuild Completed" },
- { 0x0008, "P Rebuild Cancelled" },
- { 0x0009, "P Rebuild Failed for Unknown Reasons" },
- { 0x000A, "P Rebuild Failed due to New Physical Device" },
- { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
- { 0x000C, "S Offline" },
- { 0x000D, "P Found" },
- { 0x000E, "P Removed" },
- { 0x000F, "P Unconfigured" },
- { 0x0010, "P Expand Capacity Started" },
- { 0x0011, "P Expand Capacity Completed" },
- { 0x0012, "P Expand Capacity Failed" },
- { 0x0013, "P Command Timed Out" },
- { 0x0014, "P Command Aborted" },
- { 0x0015, "P Command Retried" },
- { 0x0016, "P Parity Error" },
- { 0x0017, "P Soft Error" },
- { 0x0018, "P Miscellaneous Error" },
- { 0x0019, "P Reset" },
- { 0x001A, "P Active Spare Found" },
- { 0x001B, "P Warm Spare Found" },
- { 0x001C, "S Sense Data Received" },
- { 0x001D, "P Initialization Started" },
- { 0x001E, "P Initialization Completed" },
- { 0x001F, "P Initialization Failed" },
- { 0x0020, "P Initialization Cancelled" },
- { 0x0021, "P Failed because Write Recovery Failed" },
- { 0x0022, "P Failed because SCSI Bus Reset Failed" },
- { 0x0023, "P Failed because of Double Check Condition" },
- { 0x0024, "P Failed because Device Cannot Be Accessed" },
- { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
- { 0x0026, "P Failed because of Bad Tag from Device" },
- { 0x0027, "P Failed because of Command Timeout" },
- { 0x0028, "P Failed because of System Reset" },
- { 0x0029, "P Failed because of Busy Status or Parity Error" },
- { 0x002A, "P Failed because Host Set Device to Failed State" },
- { 0x002B, "P Failed because of Selection Timeout" },
- { 0x002C, "P Failed because of SCSI Bus Phase Error" },
- { 0x002D, "P Failed because Device Returned Unknown Status" },
- { 0x002E, "P Failed because Device Not Ready" },
- { 0x002F, "P Failed because Device Not Found at Startup" },
- { 0x0030, "P Failed because COD Write Operation Failed" },
- { 0x0031, "P Failed because BDT Write Operation Failed" },
- { 0x0039, "P Missing at Startup" },
- { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
- { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
- { 0x003D, "P Standby Rebuild Started" },
- /* Logical Device Events (0x0080 - 0x00FF) */
- { 0x0080, "M Consistency Check Started" },
- { 0x0081, "M Consistency Check Completed" },
- { 0x0082, "M Consistency Check Cancelled" },
- { 0x0083, "M Consistency Check Completed With Errors" },
- { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
- { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
- { 0x0086, "L Offline" },
- { 0x0087, "L Critical" },
- { 0x0088, "L Online" },
- { 0x0089, "M Automatic Rebuild Started" },
- { 0x008A, "M Manual Rebuild Started" },
- { 0x008B, "M Rebuild Completed" },
- { 0x008C, "M Rebuild Cancelled" },
- { 0x008D, "M Rebuild Failed for Unknown Reasons" },
- { 0x008E, "M Rebuild Failed due to New Physical Device" },
- { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
- { 0x0090, "M Initialization Started" },
- { 0x0091, "M Initialization Completed" },
- { 0x0092, "M Initialization Cancelled" },
- { 0x0093, "M Initialization Failed" },
- { 0x0094, "L Found" },
- { 0x0095, "L Deleted" },
- { 0x0096, "M Expand Capacity Started" },
- { 0x0097, "M Expand Capacity Completed" },
- { 0x0098, "M Expand Capacity Failed" },
- { 0x0099, "L Bad Block Found" },
- { 0x009A, "L Size Changed" },
- { 0x009B, "L Type Changed" },
- { 0x009C, "L Bad Data Block Found" },
- { 0x009E, "L Read of Data Block in BDT" },
- { 0x009F, "L Write Back Data for Disk Block Lost" },
- { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
- { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
- { 0x00A2, "L Standby Rebuild Started" },
- /* Fault Management Events (0x0100 - 0x017F) */
- { 0x0140, "E Fan %d Failed" },
- { 0x0141, "E Fan %d OK" },
- { 0x0142, "E Fan %d Not Present" },
- { 0x0143, "E Power Supply %d Failed" },
- { 0x0144, "E Power Supply %d OK" },
- { 0x0145, "E Power Supply %d Not Present" },
- { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
- { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
- { 0x0148, "E Temperature Sensor %d Temperature Normal" },
- { 0x0149, "E Temperature Sensor %d Not Present" },
- { 0x014A, "E Enclosure Management Unit %d Access Critical" },
- { 0x014B, "E Enclosure Management Unit %d Access OK" },
- { 0x014C, "E Enclosure Management Unit %d Access Offline" },
- /* Controller Events (0x0180 - 0x01FF) */
- { 0x0181, "C Cache Write Back Error" },
- { 0x0188, "C Battery Backup Unit Found" },
- { 0x0189, "C Battery Backup Unit Charge Level Low" },
- { 0x018A, "C Battery Backup Unit Charge Level OK" },
- { 0x0193, "C Installation Aborted" },
- { 0x0195, "C Battery Backup Unit Physically Removed" },
- { 0x0196, "C Memory Error During Warm Boot" },
- { 0x019E, "C Memory Soft ECC Error Corrected" },
- { 0x019F, "C Memory Hard ECC Error Corrected" },
- { 0x01A2, "C Battery Backup Unit Failed" },
- { 0x01AB, "C Mirror Race Recovery Failed" },
- { 0x01AC, "C Mirror Race on Critical Drive" },
- /* Controller Internal Processor Events */
- { 0x0380, "C Internal Controller Hung" },
- { 0x0381, "C Internal Controller Firmware Breakpoint" },
- { 0x0390, "C Internal Controller i960 Processor Specific Error" },
- { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
- { 0, "" } };
- int EventListIndex = 0, EventCode;
- unsigned char EventType, *EventMessage;
- if (Event->EventCode == 0x1C &&
- RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
- (RequestSense->AdditionalSenseCode == 0x80 ||
- RequestSense->AdditionalSenseCode == 0x81))
- Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
- RequestSense->AdditionalSenseCodeQualifier;
- while (true)
- {
- EventCode = EventList[EventListIndex].EventCode;
- if (EventCode == Event->EventCode || EventCode == 0) break;
- EventListIndex++;
- }
- EventType = EventList[EventListIndex].EventMessage[0];
- EventMessage = &EventList[EventListIndex].EventMessage[2];
- if (EventCode == 0)
- {
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- return;
- }
- switch (EventType)
- {
- case 'P':
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- break;
- case 'L':
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'M':
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'S':
- if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
- (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
- RequestSense->AdditionalSenseCode == 0x04 &&
- (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
- RequestSense->AdditionalSenseCodeQualifier == 0x02)))
- break;
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->SenseKey,
- RequestSense->AdditionalSenseCode,
- RequestSense->AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->Information[0],
- RequestSense->Information[1],
- RequestSense->Information[2],
- RequestSense->Information[3],
- RequestSense->CommandSpecificInformation[0],
- RequestSense->CommandSpecificInformation[1],
- RequestSense->CommandSpecificInformation[2],
- RequestSense->CommandSpecificInformation[3]);
- break;
- case 'E':
- if (Controller->SuppressEnclosureMessages) break;
- sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
- DAC960_Critical("Enclosure %d %s\n", Controller,
- Event->TargetID, MessageBuffer);
- break;
- case 'C':
- DAC960_Critical("Controller %s\n", Controller, EventMessage);
- break;
- default:
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- break;
- }
-}
-
-
-/*
- DAC960_V2_ReportProgress prints an appropriate progress message for
- Logical Device Long Operations.
-*/
-
-static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
- unsigned char *MessageString,
- unsigned int LogicalDeviceNumber,
- unsigned long BlocksCompleted,
- unsigned long LogicalDeviceSize)
-{
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n", Controller,
- MessageString,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
- Controller->EphemeralProgressMessage = false;
-}
-
-
-/*
- DAC960_V2_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode;
- DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode;
- DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V2_AbormalCompletion;
-#endif
- Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
-
- if (CommandStatus == DAC960_V2_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- /*
- Perform completion processing for all buffers in this I/O Request.
- */
- (void)DAC960_ProcessCompletedRequest(Command, false);
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- normal_completion = false;
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V2 error retry failure test\n");
- normal_completion = false;
- DAC960_V2_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (IOCTLOpcode == DAC960_V2_GetControllerInfo)
- {
- DAC960_V2_ControllerInfo_T *NewControllerInfo =
- Controller->V2.NewControllerInformation;
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- Controller->LogicalDriveCount =
- NewControllerInfo->LogicalDevicesPresent;
- Controller->V2.NeedLogicalDeviceInformation = true;
- Controller->V2.NeedPhysicalDeviceInformation = true;
- Controller->V2.StartLogicalDeviceInformationScan = true;
- Controller->V2.StartPhysicalDeviceInformationScan = true;
- Controller->MonitoringAlertMode =
- (NewControllerInfo->LogicalDevicesCritical > 0 ||
- NewControllerInfo->LogicalDevicesOffline > 0 ||
- NewControllerInfo->PhysicalDisksCritical > 0 ||
- NewControllerInfo->PhysicalDisksOffline > 0);
- memcpy(ControllerInfo, NewControllerInfo,
- sizeof(DAC960_V2_ControllerInfo_T));
- }
- else if (IOCTLOpcode == DAC960_V2_GetEvent)
- {
- if (CommandStatus == DAC960_V2_NormalCompletion) {
- DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
- }
- Controller->V2.NextEventSequenceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- unsigned int DeviceIndex;
- while (PhysicalDeviceInfo != NULL &&
- (NewPhysicalDeviceInfo->Channel >
- PhysicalDeviceInfo->Channel ||
- (NewPhysicalDeviceInfo->Channel ==
- PhysicalDeviceInfo->Channel &&
- (NewPhysicalDeviceInfo->TargetID >
- PhysicalDeviceInfo->TargetID ||
- (NewPhysicalDeviceInfo->TargetID ==
- PhysicalDeviceInfo->TargetID &&
- NewPhysicalDeviceInfo->LogicalUnit >
- PhysicalDeviceInfo->LogicalUnit)))))
- {
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- for (DeviceIndex = PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex++)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
- }
- Controller->V2.PhysicalDeviceInformation
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- }
- if (PhysicalDeviceInfo == NULL ||
- (NewPhysicalDeviceInfo->Channel !=
- PhysicalDeviceInfo->Channel) ||
- (NewPhysicalDeviceInfo->TargetID !=
- PhysicalDeviceInfo->TargetID) ||
- (NewPhysicalDeviceInfo->LogicalUnit !=
- PhysicalDeviceInfo->LogicalUnit))
- {
- PhysicalDeviceInfo =
- kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
- InquiryUnitSerialNumber =
- kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL ||
- PhysicalDeviceInfo == NULL)
- {
- kfree(InquiryUnitSerialNumber);
- InquiryUnitSerialNumber = NULL;
- kfree(PhysicalDeviceInfo);
- PhysicalDeviceInfo = NULL;
- }
- DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (PhysicalDeviceInfo != NULL)
- {
- memset(PhysicalDeviceInfo, 0,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- PhysicalDeviceInfo->PhysicalDeviceState =
- DAC960_V2_Device_InvalidState;
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex > PhysicalDeviceIndex;
- DeviceIndex--)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
- }
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- }
- }
- if (PhysicalDeviceInfo != NULL)
- {
- if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
- PhysicalDeviceInfo->PhysicalDeviceState)
- DAC960_Critical(
- "Physical Device %d:%d is now %s\n", Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "ONLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "REBUILD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "MISSING"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "CRITICAL"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "SUSPECTED-DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "COMMANDED-OFFLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "STANDBY" : "UNKNOWN"));
- if ((NewPhysicalDeviceInfo->ParityErrors !=
- PhysicalDeviceInfo->ParityErrors) ||
- (NewPhysicalDeviceInfo->SoftErrors !=
- PhysicalDeviceInfo->SoftErrors) ||
- (NewPhysicalDeviceInfo->HardErrors !=
- PhysicalDeviceInfo->HardErrors) ||
- (NewPhysicalDeviceInfo->MiscellaneousErrors !=
- PhysicalDeviceInfo->MiscellaneousErrors) ||
- (NewPhysicalDeviceInfo->CommandTimeouts !=
- PhysicalDeviceInfo->CommandTimeouts) ||
- (NewPhysicalDeviceInfo->Retries !=
- PhysicalDeviceInfo->Retries) ||
- (NewPhysicalDeviceInfo->Aborts !=
- PhysicalDeviceInfo->Aborts) ||
- (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
- PhysicalDeviceInfo->PredictedFailuresDetected))
- {
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->ParityErrors,
- NewPhysicalDeviceInfo->SoftErrors,
- NewPhysicalDeviceInfo->HardErrors,
- NewPhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Timeouts = %d, Retries = %d, "
- "Aborts = %d, Predicted = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->CommandTimeouts,
- NewPhysicalDeviceInfo->Retries,
- NewPhysicalDeviceInfo->Aborts,
- NewPhysicalDeviceInfo
- ->PredictedFailuresDetected);
- }
- if ((PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead ||
- PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_InvalidState) &&
- NewPhysicalDeviceInfo->PhysicalDeviceState
- != DAC960_V2_Device_Dead)
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- }
- NewPhysicalDeviceInfo->LogicalUnit++;
- Controller->V2.PhysicalDeviceIndex++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
- {
- unsigned int DeviceIndex;
- for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices;
- DeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- }
- Controller->V2.NeedPhysicalDeviceInformation = false;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- unsigned short LogicalDeviceNumber =
- NewLogicalDeviceInfo->LogicalDeviceNumber;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
- if (LogicalDeviceInfo == NULL)
- {
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists%s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (LogicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (LogicalDeviceInfo != NULL)
- {
- memset(LogicalDeviceInfo, 0,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- }
- if (LogicalDeviceInfo != NULL)
- {
- unsigned long LogicalDeviceSize =
- NewLogicalDeviceInfo->ConfigurableDeviceSize;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- LogicalDeviceInfo->LogicalDeviceState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "ONLINE"
- : NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "CRITICAL" : "OFFLINE"));
- if ((NewLogicalDeviceInfo->SoftErrors !=
- LogicalDeviceInfo->SoftErrors) ||
- (NewLogicalDeviceInfo->CommandsFailed !=
- LogicalDeviceInfo->CommandsFailed) ||
- (NewLogicalDeviceInfo->DeferredWriteErrors !=
- LogicalDeviceInfo->DeferredWriteErrors))
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
- "Soft = %d, Failed = %d, Deferred Write = %d\n",
- Controller, LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- NewLogicalDeviceInfo->SoftErrors,
- NewLogicalDeviceInfo->CommandsFailed,
- NewLogicalDeviceInfo->DeferredWriteErrors);
- if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Consistency Check",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ConsistencyCheckBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->RebuildInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Rebuild",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->RebuildBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Background Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->BackgroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Foreground Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ForegroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->DataMigrationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Data Migration",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->DataMigrationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Patrol Operation",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->PatrolOperationBlockNumber,
- LogicalDeviceSize);
- if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
- !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
- "Background Initialization %s\n",
- Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Completed" : "Failed"));
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- }
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDeviceNumber] = true;
- NewLogicalDeviceInfo->LogicalDeviceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL ||
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber])
- continue;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->V2.LogicalDeviceInformation
- [LogicalDriveNumber] = NULL;
- kfree(LogicalDeviceInfo);
- Controller->LogicalDriveInitiallyAccessible
- [LogicalDriveNumber] = false;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- Controller->V2.NeedLogicalDeviceInformation = false;
- }
- else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
-
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- memset(InquiryUnitSerialNumber,
- 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber,
- Controller->V2.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- Controller->V2.NeedDeviceSerialNumberInformation = false;
- }
-
- if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- - Controller->V2.NextEventSequenceNumber > 0)
- {
- CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
- CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
- Controller->V2.NextEventSequenceNumber >> 16;
- CommandMailbox->GetEvent.ControllerNumber = 0;
- CommandMailbox->GetEvent.IOCTL_Opcode =
- DAC960_V2_GetEvent;
- CommandMailbox->GetEvent.EventSequenceNumberLow16 =
- Controller->V2.NextEventSequenceNumber & 0xFFFF;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.EventDMA;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->GetEvent.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedPhysicalDeviceInformation)
- {
- if (Controller->V2.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Controller->V2.NewPhysicalDeviceInformation->Channel,
- Controller->V2.NewPhysicalDeviceInformation->TargetID,
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
-
-
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.StartPhysicalDeviceInformationScan)
- {
- Controller->V2.PhysicalDeviceIndex = 0;
- Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
- Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
- Controller->V2.StartPhysicalDeviceInformationScan = false;
- }
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
- Controller->V2.NewPhysicalDeviceInformation->TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
- Controller->V2.NewPhysicalDeviceInformation->Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedLogicalDeviceInformation)
- {
- if (Controller->V2.StartLogicalDeviceInformationScan)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber] = false;
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
- Controller->V2.StartLogicalDeviceInformationScan = false;
- }
- CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
- KernelCommand->CommandStatus = CommandStatus;
- KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
- KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
- Command->V2.KernelCommand = NULL;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V2_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-/*
- DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
- Controllers.
-
- Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
- on the data having been placed into DAC960_Controller_T, rather than
- an arbitrary buffer.
-*/
-
-static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- CommandMailbox->Common.CommandOpcode;
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- switch (CommandOpcode)
- {
- case DAC960_V1_Enquiry_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
- DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
- break;
- case DAC960_V1_GetDeviceState_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_GetDeviceState;
- DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
- break;
- case DAC960_V1_Read_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
- Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
- CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
- Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_MonitoringTimerFunction is the timer function for monitoring
- the status of DAC960 Controllers.
-*/
-
-static void DAC960_MonitoringTimerFunction(struct timer_list *t)
-{
- DAC960_Controller_T *Controller = from_timer(Controller, t, MonitoringTimer);
- DAC960_Command_T *Command;
- unsigned long flags;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V1_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- else
- {
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned int StatusChangeCounter =
- Controller->V2.HealthStatusBuffer->StatusChangeCounter;
- bool ForceMonitoringCommand = false;
- if (time_after(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL) continue;
- if (!LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized)
- {
- ForceMonitoringCommand = true;
- break;
- }
- }
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == Controller->V2.NextEventSequenceNumber &&
- (ControllerInfo->BackgroundInitializationsActive +
- ControllerInfo->LogicalDeviceInitializationsActive +
- ControllerInfo->PhysicalDeviceInitializationsActive +
- ControllerInfo->ConsistencyChecksActive +
- ControllerInfo->RebuildsActive +
- ControllerInfo->OnlineExpansionsActive == 0 ||
- time_before(jiffies, Controller->PrimaryMonitoringTime
- + DAC960_MonitoringTimerInterval)) &&
- !ForceMonitoringCommand)
- {
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- return;
- }
- Controller->V2.StatusChangeCounter = StatusChangeCounter;
- Controller->PrimaryMonitoringTime = jiffies;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V2_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- /*
- Wake up any processes waiting on a Health Status Buffer change.
- */
- wake_up(&Controller->HealthStatusWaitQueue);
- }
-}
-
-/*
- DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
- additional bytes in the Combined Status Buffer and grows the buffer if
- necessary. It returns true if there is enough room and false otherwise.
-*/
-
-static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
- unsigned int ByteCount)
-{
- unsigned char *NewStatusBuffer;
- if (Controller->InitialStatusLength + 1 +
- Controller->CurrentStatusLength + ByteCount + 1 <=
- Controller->CombinedStatusBufferLength)
- return true;
- if (Controller->CombinedStatusBufferLength == 0)
- {
- unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
- while (NewStatusBufferLength < ByteCount)
- NewStatusBufferLength *= 2;
- Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
- GFP_ATOMIC);
- if (Controller->CombinedStatusBuffer == NULL) return false;
- Controller->CombinedStatusBufferLength = NewStatusBufferLength;
- return true;
- }
- NewStatusBuffer = kmalloc_array(2, Controller->CombinedStatusBufferLength,
- GFP_ATOMIC);
- if (NewStatusBuffer == NULL)
- {
- DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
- Controller);
- return false;
- }
- memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
- Controller->CombinedStatusBufferLength);
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NewStatusBuffer;
- Controller->CombinedStatusBufferLength *= 2;
- Controller->CurrentStatusBuffer =
- &NewStatusBuffer[Controller->InitialStatusLength + 1];
- return true;
-}
-
-
-/*
- DAC960_Message prints Driver Messages.
-*/
-
-static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
- unsigned char *Format,
- DAC960_Controller_T *Controller,
- ...)
-{
- static unsigned char Buffer[DAC960_LineBufferSize];
- static bool BeginningOfLine = true;
- va_list Arguments;
- int Length = 0;
- va_start(Arguments, Controller);
- Length = vsprintf(Buffer, Format, Arguments);
- va_end(Arguments);
- if (Controller == NULL)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- DAC960_ControllerCount, Buffer);
- else if (MessageLevel == DAC960_AnnounceLevel ||
- MessageLevel == DAC960_InfoLevel)
- {
- if (!Controller->ControllerInitialized)
- {
- if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength],
- Buffer);
- Controller->InitialStatusLength += Length;
- Controller->CurrentStatusBuffer =
- &Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength + 1];
- }
- if (MessageLevel == DAC960_AnnounceLevel)
- {
- static int AnnouncementLines = 0;
- if (++AnnouncementLines <= 2)
- printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
- Buffer);
- }
- else
- {
- if (BeginningOfLine)
- {
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s",
- DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else printk("%s", Buffer);
- }
- }
- else if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CurrentStatusBuffer[
- Controller->CurrentStatusLength], Buffer);
- Controller->CurrentStatusLength += Length;
- }
- }
- else if (MessageLevel == DAC960_ProgressLevel)
- {
- strcpy(Controller->ProgressBuffer, Buffer);
- Controller->ProgressBufferLength = Length;
- if (Controller->EphemeralProgressMessage)
- {
- if (time_after_eq(jiffies, Controller->LastProgressReportTime
- + DAC960_ProgressReportingInterval))
- {
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- Controller->LastProgressReportTime = jiffies;
- }
- }
- else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else if (MessageLevel == DAC960_UserCriticalLevel)
- {
- strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
- Buffer);
- Controller->UserStatusLength += Length;
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else
- {
- if (BeginningOfLine)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- else printk("%s", Buffer);
- }
- BeginningOfLine = (Buffer[Length-1] == '\n');
-}
-
-
-/*
- DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
- Channel:TargetID specification from a User Command string. It updates
- Channel and TargetID and returns true on success and false on failure.
-*/
-
-static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *Channel,
- unsigned char *TargetID)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XChannel, XTargetID;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != ':' ||
- XChannel >= Controller->Channels)
- return false;
- UserCommandString = ++NewUserCommandString;
- XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XTargetID >= Controller->Targets)
- return false;
- *Channel = XChannel;
- *TargetID = XTargetID;
- return true;
-}
-
-
-/*
- DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
- specification from a User Command string. It updates LogicalDriveNumber and
- returns true on success and false on failure.
-*/
-
-static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *LogicalDriveNumber)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XLogicalDriveNumber;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XLogicalDriveNumber =
- simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
- return false;
- *LogicalDriveNumber = XLogicalDriveNumber;
- return true;
-}
-
-
-/*
- DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
- DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- DAC960_V1_PhysicalDeviceState_T
- DeviceState,
- const unsigned char *DeviceStateString)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.DeviceState = DeviceState;
- CommandMailbox->Type3D.Modifier = 0;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_UnableToStartDevice:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unable to Start Device\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_NoDeviceAtAddress:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "No Device at Address\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_InvalidChannelOrTargetOrModifier:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Invalid Channel or Target or Modifier\n",
- Controller, DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_ChannelBusy:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Channel Busy\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- DeviceStateString, Channel, TargetID,
- Command->V1.CommandStatus);
- break;
- }
-}
-
-
-/*
- DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
- Controllers.
-*/
-
-static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V1_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V1.CommandMailbox;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState != DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Dead, "Kill");
- else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Online, "Make Online");
- else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
-
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Standby, "Make Standby");
- else DAC960_UserCritical("Make Standby of Physical "
- "Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID))
- {
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_AttemptToRebuildOnlineDrive:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Attempt to Rebuild Online or "
- "Unresponsive Drive\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_NewDiskFailedDuringRebuild:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "New Disk Failed During Rebuild\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_InvalidDeviceAddress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Invalid Device Address\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Rebuild or Consistency Check Already "
- "in Progress\n", Controller, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- Channel, TargetID, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
- CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
- CommandMailbox->Type3C.AutoRestore = true;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Initiated\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_DependentDiskIsDead:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Dependent Physical Device is DEAD\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_InvalidOrNonredundantLogicalDrive:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Invalid or Nonredundant Logical Drive\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - Rebuild or "
- "Consistency Check Already in Progress\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- default:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Unexpected Status %04X\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
- strcmp(UserCommand, "cancel-consistency-check") == 0)
- {
- /*
- the OldRebuildRateConstant is never actually used
- once its value is retrieved from the controller.
- */
- unsigned char *OldRebuildRateConstant;
- dma_addr_t OldRebuildRateConstantDMA;
-
- OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
- sizeof(char), &OldRebuildRateConstantDMA);
- if (OldRebuildRateConstant == NULL) {
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Out of Memory",
- Controller);
- goto failure;
- }
- CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
- CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
- CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
- Controller);
- break;
- default:
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Unexpected Status %04X\n",
- Controller, Command->V1.CommandStatus);
- break;
- }
-failure:
- pci_free_consistent(Controller->PCIDevice, sizeof(char),
- OldRebuildRateConstant, OldRebuildRateConstantDMA);
- }
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-
-/*
- DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
- TargetID into a Logical Device. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned short
- *LogicalDeviceNumber)
-{
- DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
- DAC960_Controller_T *Controller = Command->Controller;
-
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(&SavedCommandMailbox, CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
-
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_TranslatePhysicalToLogicalDevice;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.PhysicalToLogicalDeviceDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
-
- DAC960_ExecuteCommand(Command);
- *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
-
- memcpy(CommandMailbox, &SavedCommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
- Controllers.
-*/
-
-static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
- unsigned short LogicalDeviceNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
- CommandMailbox->DeviceOperation.OperationDevice =
- DAC960_V2_RAID_Controller;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Dead;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Online;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Standby;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStart;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStart;
- CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
- CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strcmp(UserCommand, "perform-discovery") == 0)
- {
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Discovery %s\n", Controller,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
- {
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode =
- DAC960_V2_GetControllerInfo;
- /*
- * How does this NOT race with the queued Monitoring
- * usage of this structure?
- */
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- while (1) {
- DAC960_ExecuteCommand(Command);
- if (!Controller->V2.NewControllerInformation->PhysicalScanActive)
- break;
- msleep(1000);
- }
- DAC960_UserCritical("Discovery Completed\n", Controller);
- }
- }
- else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
- Controller->SuppressEnclosureMessages = true;
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-static int __maybe_unused dac960_proc_show(struct seq_file *m, void *v)
-{
- unsigned char *StatusMessage = "OK\n";
- int ControllerNumber;
- for (ControllerNumber = 0;
- ControllerNumber < DAC960_ControllerCount;
- ControllerNumber++)
- {
- DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) continue;
- if (Controller->MonitoringAlertMode)
- {
- StatusMessage = "ALERT\n";
- break;
- }
- }
- seq_puts(m, StatusMessage);
- return 0;
-}
-
-static int __maybe_unused dac960_initial_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
- seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
- return 0;
-}
-
-static int __maybe_unused dac960_current_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
- unsigned char *StatusMessage =
- "No Rebuild or Consistency Check in Progress\n";
- int ProgressMessageLength = strlen(StatusMessage);
- if (jiffies != Controller->LastCurrentStatusTime)
- {
- Controller->CurrentStatusLength = 0;
- DAC960_AnnounceDriver(Controller);
- DAC960_ReportControllerConfiguration(Controller);
- DAC960_ReportDeviceConfiguration(Controller);
- if (Controller->ProgressBufferLength > 0)
- ProgressMessageLength = Controller->ProgressBufferLength;
- if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
- {
- unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- if (Controller->ProgressBufferLength > 0)
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- Controller->ProgressBuffer);
- else
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- StatusMessage);
- Controller->CurrentStatusLength += ProgressMessageLength;
- }
- Controller->LastCurrentStatusTime = jiffies;
- }
- seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_show(struct seq_file *m, void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
-
- seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dac960_user_command_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t dac960_user_command_proc_write(struct file *file,
- const char __user *Buffer,
- size_t Count, loff_t *pos)
-{
- DAC960_Controller_T *Controller = PDE_DATA(file_inode(file));
- unsigned char CommandBuffer[80];
- int Length;
- if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
- if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
- CommandBuffer[Count] = '\0';
- Length = strlen(CommandBuffer);
- if (Length > 0 && CommandBuffer[Length-1] == '\n')
- CommandBuffer[--Length] = '\0';
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
- else
- return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
-}
-
-static const struct file_operations dac960_user_command_proc_fops = {
- .owner = THIS_MODULE,
- .open = dac960_user_command_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dac960_user_command_proc_write,
-};
-
-/*
- DAC960_CreateProcEntries creates the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
-{
- struct proc_dir_entry *ControllerProcEntry;
-
- if (DAC960_ProcDirectoryEntry == NULL) {
- DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
- proc_create_single("status", 0, DAC960_ProcDirectoryEntry,
- dac960_proc_show);
- }
-
- snprintf(Controller->ControllerName, sizeof(Controller->ControllerName),
- "c%d", Controller->ControllerNumber);
- ControllerProcEntry = proc_mkdir(Controller->ControllerName,
- DAC960_ProcDirectoryEntry);
- proc_create_single_data("initial_status", 0, ControllerProcEntry,
- dac960_initial_status_proc_show, Controller);
- proc_create_single_data("current_status", 0, ControllerProcEntry,
- dac960_current_status_proc_show, Controller);
- proc_create_data("user_command", 0600, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
- Controller->ControllerProcEntry = ControllerProcEntry;
-}
-
-
-/*
- DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerProcEntry == NULL)
- return;
- remove_proc_entry("initial_status", Controller->ControllerProcEntry);
- remove_proc_entry("current_status", Controller->ControllerProcEntry);
- remove_proc_entry("user_command", Controller->ControllerProcEntry);
- remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
- Controller->ControllerProcEntry = NULL;
-}
-
-#ifdef DAC960_GAM_MINOR
-
-static long DAC960_gam_get_controller_info(DAC960_ControllerInfo_T __user *UserSpaceControllerInfo)
-{
- DAC960_ControllerInfo_T ControllerInfo;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceControllerInfo == NULL)
- ErrorCode = -EINVAL;
- else ErrorCode = get_user(ControllerNumber,
- &UserSpaceControllerInfo->ControllerNumber);
- if (ErrorCode != 0)
- goto out;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1) {
- goto out;
- }
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
- ControllerInfo.ControllerNumber = ControllerNumber;
- ControllerInfo.FirmwareType = Controller->FirmwareType;
- ControllerInfo.Channels = Controller->Channels;
- ControllerInfo.Targets = Controller->Targets;
- ControllerInfo.PCI_Bus = Controller->Bus;
- ControllerInfo.PCI_Device = Controller->Device;
- ControllerInfo.PCI_Function = Controller->Function;
- ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
- ControllerInfo.PCI_Address = Controller->PCI_Address;
- strcpy(ControllerInfo.ModelName, Controller->ModelName);
- strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
- ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
- sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v1_execute_command(DAC960_V1_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V1_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V1_CommandOpcode_T CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_DCDB_T DCDB;
- DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
- dma_addr_t DCDB_IOBUFDMA;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- long ErrorCode;
-
- if (UserSpaceUserCommand == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V1_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ControllerNumber = UserCommand.ControllerNumber;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- ErrorCode = -EINVAL;
- if (Controller->FirmwareType != DAC960_V1_Controller)
- goto out;
- CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
- DataTransferLength = UserCommand.DataTransferLength;
- if (CommandOpcode & 0x80)
- goto out;
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- if (copy_from_user(&DCDB, UserCommand.DCDB,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- if (DCDB.Channel >= DAC960_V1_MaxChannels)
- goto out;
- if (!((DataTransferLength == 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_NoDataTransfer) ||
- (DataTransferLength > 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
- (DataTransferLength < 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferSystemToDevice)))
- goto out;
- if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
- != abs(DataTransferLength))
- goto out;
- DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
- sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
- if (DCDB_IOBUF == NULL) {
- ErrorCode = -ENOMEM;
- goto out;
- }
- }
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto out;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- while (Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID])
- {
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue,
- !Controller->V1.DirectCommandActive
- [DCDB.Channel][DCDB.TargetID]);
- spin_lock_irq(&Controller->queue_lock);
- }
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
- DCDB.BusAddress = DataTransferBufferDMA;
- memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
- }
- else
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- if (DataTransferBuffer != NULL)
- Command->V1.CommandMailbox.Type3.BusAddress =
- DataTransferBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- I don't believe Target or Channel in the DCDB_IOBUF
- should be any different from the contents of DCDB.
- */
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = false;
- if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- ErrorCode = CommandStatus;
- Failure1:
- if (DataTransferBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (DCDB_IOBUF != NULL)
- pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
- DCDB_IOBUF, DCDB_IOBUFDMA);
- out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_execute_command(DAC960_V2_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V2_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- int DataTransferResidue, RequestSenseLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- unsigned char *RequestSenseBuffer = NULL;
- dma_addr_t RequestSenseBufferDMA;
- long ErrorCode = -EINVAL;
-
- if (UserSpaceUserCommand == NULL)
- goto out;
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V2_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = UserCommand.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller){
- ErrorCode = -EINVAL;
- goto out;
- }
- DataTransferLength = UserCommand.DataTransferLength;
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (RequestSenseLength > 0)
- {
- RequestSenseBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- RequestSenseLength,
- &RequestSenseBufferDMA);
- if (RequestSenseBuffer == NULL)
- {
- ErrorCode = -ENOMEM;
- goto Failure2;
- }
- }
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->Common.CommandControlBits
- .AdditionalScatterGatherListMemory = false;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = 0;
- CommandMailbox->Common.DataTransferPageNumber = 0;
- memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
- sizeof(DAC960_V2_DataTransferMemoryAddress_T));
- if (DataTransferLength != 0)
- {
- if (DataTransferLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.DataTransferSize = DataTransferLength;
- }
- else
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = false;
- CommandMailbox->Common.DataTransferSize = -DataTransferLength;
- }
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer = DataTransferBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- }
- if (RequestSenseLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = false;
- CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
- CommandMailbox->Common.RequestSenseBusAddress =
- RequestSenseBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- RequestSenseLength = Command->V2.RequestSenseLength;
- DataTransferResidue = Command->V2.DataTransferResidue;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (RequestSenseLength > UserCommand.RequestSenseLength)
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
- &DataTransferResidue,
- sizeof(DataTransferResidue))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
- &RequestSenseLength, sizeof(RequestSenseLength))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- if (RequestSenseLength > 0)
- {
- if (copy_to_user(UserCommand.RequestSenseBuffer,
- RequestSenseBuffer, RequestSenseLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- ErrorCode = CommandStatus;
- Failure2:
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (RequestSenseBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
- RequestSenseBuffer, RequestSenseBufferDMA);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_get_health_status(DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus)
-{
- DAC960_V2_GetHealthStatus_T GetHealthStatus;
- DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceGetHealthStatus == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
- sizeof(DAC960_V2_GetHealthStatus_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = GetHealthStatus.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&HealthStatusBuffer,
- GetHealthStatus.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = wait_event_interruptible_timeout(Controller->HealthStatusWaitQueue,
- !(Controller->V2.HealthStatusBuffer->StatusChangeCounter
- == HealthStatusBuffer.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == HealthStatusBuffer.NextEventSequenceNumber),
- DAC960_MonitoringTimerInterval);
- if (ErrorCode == -ERESTARTSYS) {
- ErrorCode = -EINTR;
- goto out;
- }
- if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
- Controller->V2.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T)))
- ErrorCode = -EFAULT;
- else
- ErrorCode = 0;
-
-out:
- return ErrorCode;
-}
-
-/*
- * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
-*/
-
-static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
- unsigned long Argument)
-{
- long ErrorCode = 0;
- void __user *argp = (void __user *)Argument;
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-
- mutex_lock(&DAC960_mutex);
- switch (Request)
- {
- case DAC960_IOCTL_GET_CONTROLLER_COUNT:
- ErrorCode = DAC960_ControllerCount;
- break;
- case DAC960_IOCTL_GET_CONTROLLER_INFO:
- ErrorCode = DAC960_gam_get_controller_info(argp);
- break;
- case DAC960_IOCTL_V1_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v1_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v2_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
- ErrorCode = DAC960_gam_v2_get_health_status(argp);
- break;
- default:
- ErrorCode = -ENOTTY;
- }
- mutex_unlock(&DAC960_mutex);
- return ErrorCode;
-}
-
-static const struct file_operations DAC960_gam_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = DAC960_gam_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice DAC960_gam_dev = {
- DAC960_GAM_MINOR,
- "dac960_gam",
- &DAC960_gam_fops
-};
-
-static int DAC960_gam_init(void)
-{
- int ret;
-
- ret = misc_register(&DAC960_gam_dev);
- if (ret)
- printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
- return ret;
-}
-
-static void DAC960_gam_cleanup(void)
-{
- misc_deregister(&DAC960_gam_dev);
-}
-
-#endif /* DAC960_GAM_MINOR */
-
-static struct DAC960_privdata DAC960_GEM_privdata = {
- .HardwareType = DAC960_GEM_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_GEM_InterruptHandler,
- .MemoryWindowSize = DAC960_GEM_RegisterWindowSize,
-};
-
-
-static struct DAC960_privdata DAC960_BA_privdata = {
- .HardwareType = DAC960_BA_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_BA_InterruptHandler,
- .MemoryWindowSize = DAC960_BA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LP_privdata = {
- .HardwareType = DAC960_LP_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_LP_InterruptHandler,
- .MemoryWindowSize = DAC960_LP_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LA_privdata = {
- .HardwareType = DAC960_LA_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_LA_InterruptHandler,
- .MemoryWindowSize = DAC960_LA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PG_privdata = {
- .HardwareType = DAC960_PG_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PG_InterruptHandler,
- .MemoryWindowSize = DAC960_PG_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PD_privdata = {
- .HardwareType = DAC960_PD_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PD_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_P_privdata = {
- .HardwareType = DAC960_P_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_P_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static const struct pci_device_id DAC960_id_table[] = {
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_GEM_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_BA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_BA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_LP,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_LP_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_DEC,
- .device = PCI_DEVICE_ID_DEC_21285,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_DEVICE_ID_MYLEX_DAC960_LA,
- .driver_data = (unsigned long) &DAC960_LA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PG,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PG_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PD_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_P_privdata,
- },
- {0, },
-};
-
-MODULE_DEVICE_TABLE(pci, DAC960_id_table);
-
-static struct pci_driver DAC960_pci_driver = {
- .name = "DAC960",
- .id_table = DAC960_id_table,
- .probe = DAC960_Probe,
- .remove = DAC960_Remove,
-};
-
-static int __init DAC960_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&DAC960_pci_driver);
-#ifdef DAC960_GAM_MINOR
- if (!ret)
- DAC960_gam_init();
-#endif
- return ret;
-}
-
-static void __exit DAC960_cleanup_module(void)
-{
- int i;
-
-#ifdef DAC960_GAM_MINOR
- DAC960_gam_cleanup();
-#endif
-
- for (i = 0; i < DAC960_ControllerCount; i++) {
- DAC960_Controller_T *Controller = DAC960_Controllers[i];
- if (Controller == NULL)
- continue;
- DAC960_FinalizeController(Controller);
- }
- if (DAC960_ProcDirectoryEntry != NULL) {
- remove_proc_entry("rd/status", NULL);
- remove_proc_entry("rd", NULL);
- }
- DAC960_ControllerCount = 0;
- pci_unregister_driver(&DAC960_pci_driver);
-}
-
-module_init(DAC960_init_module);
-module_exit(DAC960_cleanup_module);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h
deleted file mode 100644
index 1439e651928b..000000000000
--- a/drivers/block/DAC960.h
+++ /dev/null
@@ -1,4414 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
- The author respectfully requests that any modifications to this software be
- sent directly to him for evaluation and testing.
-
-*/
-
-
-/*
- Define the maximum number of DAC960 Controllers supported by this driver.
-*/
-
-#define DAC960_MaxControllers 8
-
-
-/*
- Define the maximum number of Controller Channels supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxChannels 3
-#define DAC960_V2_MaxChannels 4
-
-
-/*
- Define the maximum number of Targets per Channel supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxTargets 16
-#define DAC960_V2_MaxTargets 128
-
-
-/*
- Define the maximum number of Logical Drives supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxLogicalDrives 32
-
-
-/*
- Define the maximum number of Physical Devices supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxPhysicalDevices 45
-#define DAC960_V2_MaxPhysicalDevices 272
-
-/*
- Define a 32/64 bit I/O Address data type.
-*/
-
-typedef unsigned long DAC960_IO_Address_T;
-
-
-/*
- Define a 32/64 bit PCI Bus Address data type.
-*/
-
-typedef unsigned long DAC960_PCI_Address_T;
-
-
-/*
- Define a 32 bit Bus Address data type.
-*/
-
-typedef unsigned int DAC960_BusAddress32_T;
-
-
-/*
- Define a 64 bit Bus Address data type.
-*/
-
-typedef unsigned long long DAC960_BusAddress64_T;
-
-
-/*
- Define a 32 bit Byte Count data type.
-*/
-
-typedef unsigned int DAC960_ByteCount32_T;
-
-
-/*
- Define a 64 bit Byte Count data type.
-*/
-
-typedef unsigned long long DAC960_ByteCount64_T;
-
-
-/*
- dma_loaf is used by helper routines to divide a region of
- dma mapped memory into smaller pieces, where those pieces
- are not of uniform size.
- */
-
-struct dma_loaf {
- void *cpu_base;
- dma_addr_t dma_base;
- size_t length;
- void *cpu_free;
- dma_addr_t dma_free;
-};
-
-/*
- Define the SCSI INQUIRY Standard Data structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
- bool RMB:1; /* Byte 1 Bit 7 */
- unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
- unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
- unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
- unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
- unsigned char :2; /* Byte 3 Bits 4-5 */
- bool TrmIOP:1; /* Byte 3 Bit 6 */
- bool AENC:1; /* Byte 3 Bit 7 */
- unsigned char AdditionalLength; /* Byte 4 */
- unsigned char :8; /* Byte 5 */
- unsigned char :8; /* Byte 6 */
- bool SftRe:1; /* Byte 7 Bit 0 */
- bool CmdQue:1; /* Byte 7 Bit 1 */
- bool :1; /* Byte 7 Bit 2 */
- bool Linked:1; /* Byte 7 Bit 3 */
- bool Sync:1; /* Byte 7 Bit 4 */
- bool WBus16:1; /* Byte 7 Bit 5 */
- bool WBus32:1; /* Byte 7 Bit 6 */
- bool RelAdr:1; /* Byte 7 Bit 7 */
- unsigned char VendorIdentification[8]; /* Bytes 8-15 */
- unsigned char ProductIdentification[16]; /* Bytes 16-31 */
- unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
-}
-DAC960_SCSI_Inquiry_T;
-
-
-/*
- Define the SCSI INQUIRY Unit Serial Number structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry_UnitSerialNumber
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char PageCode; /* Byte 1 */
- unsigned char :8; /* Byte 2 */
- unsigned char PageLength; /* Byte 3 */
- unsigned char ProductSerialNumber[28]; /* Bytes 4-31 */
-}
-DAC960_SCSI_Inquiry_UnitSerialNumber_T;
-
-
-/*
- Define the SCSI REQUEST SENSE Sense Key type.
-*/
-
-typedef enum
-{
- DAC960_SenseKey_NoSense = 0x0,
- DAC960_SenseKey_RecoveredError = 0x1,
- DAC960_SenseKey_NotReady = 0x2,
- DAC960_SenseKey_MediumError = 0x3,
- DAC960_SenseKey_HardwareError = 0x4,
- DAC960_SenseKey_IllegalRequest = 0x5,
- DAC960_SenseKey_UnitAttention = 0x6,
- DAC960_SenseKey_DataProtect = 0x7,
- DAC960_SenseKey_BlankCheck = 0x8,
- DAC960_SenseKey_VendorSpecific = 0x9,
- DAC960_SenseKey_CopyAborted = 0xA,
- DAC960_SenseKey_AbortedCommand = 0xB,
- DAC960_SenseKey_Equal = 0xC,
- DAC960_SenseKey_VolumeOverflow = 0xD,
- DAC960_SenseKey_Miscompare = 0xE,
- DAC960_SenseKey_Reserved = 0xF
-}
-__attribute__ ((packed))
-DAC960_SCSI_RequestSenseKey_T;
-
-
-/*
- Define the SCSI REQUEST SENSE structure.
-*/
-
-typedef struct DAC960_SCSI_RequestSense
-{
- unsigned char ErrorCode:7; /* Byte 0 Bits 0-6 */
- bool Valid:1; /* Byte 0 Bit 7 */
- unsigned char SegmentNumber; /* Byte 1 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 2 Bits 0-3 */
- unsigned char :1; /* Byte 2 Bit 4 */
- bool ILI:1; /* Byte 2 Bit 5 */
- bool EOM:1; /* Byte 2 Bit 6 */
- bool Filemark:1; /* Byte 2 Bit 7 */
- unsigned char Information[4]; /* Bytes 3-6 */
- unsigned char AdditionalSenseLength; /* Byte 7 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 8-11 */
- unsigned char AdditionalSenseCode; /* Byte 12 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 13 */
-}
-DAC960_SCSI_RequestSense_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- /* I/O Commands */
- DAC960_V1_ReadExtended = 0x33,
- DAC960_V1_WriteExtended = 0x34,
- DAC960_V1_ReadAheadExtended = 0x35,
- DAC960_V1_ReadExtendedWithScatterGather = 0xB3,
- DAC960_V1_WriteExtendedWithScatterGather = 0xB4,
- DAC960_V1_Read = 0x36,
- DAC960_V1_ReadWithScatterGather = 0xB6,
- DAC960_V1_Write = 0x37,
- DAC960_V1_WriteWithScatterGather = 0xB7,
- DAC960_V1_DCDB = 0x04,
- DAC960_V1_DCDBWithScatterGather = 0x84,
- DAC960_V1_Flush = 0x0A,
- /* Controller Status Related Commands */
- DAC960_V1_Enquiry = 0x53,
- DAC960_V1_Enquiry2 = 0x1C,
- DAC960_V1_GetLogicalDriveElement = 0x55,
- DAC960_V1_GetLogicalDriveInformation = 0x19,
- DAC960_V1_IOPortRead = 0x39,
- DAC960_V1_IOPortWrite = 0x3A,
- DAC960_V1_GetSDStats = 0x3E,
- DAC960_V1_GetPDStats = 0x3F,
- DAC960_V1_PerformEventLogOperation = 0x72,
- /* Device Related Commands */
- DAC960_V1_StartDevice = 0x10,
- DAC960_V1_GetDeviceState = 0x50,
- DAC960_V1_StopChannel = 0x13,
- DAC960_V1_StartChannel = 0x12,
- DAC960_V1_ResetChannel = 0x1A,
- /* Commands Associated with Data Consistency and Errors */
- DAC960_V1_Rebuild = 0x09,
- DAC960_V1_RebuildAsync = 0x16,
- DAC960_V1_CheckConsistency = 0x0F,
- DAC960_V1_CheckConsistencyAsync = 0x1E,
- DAC960_V1_RebuildStat = 0x0C,
- DAC960_V1_GetRebuildProgress = 0x27,
- DAC960_V1_RebuildControl = 0x1F,
- DAC960_V1_ReadBadBlockTable = 0x0B,
- DAC960_V1_ReadBadDataTable = 0x25,
- DAC960_V1_ClearBadDataTable = 0x26,
- DAC960_V1_GetErrorTable = 0x17,
- DAC960_V1_AddCapacityAsync = 0x2A,
- DAC960_V1_BackgroundInitializationControl = 0x2B,
- /* Configuration Related Commands */
- DAC960_V1_ReadConfig2 = 0x3D,
- DAC960_V1_WriteConfig2 = 0x3C,
- DAC960_V1_ReadConfigurationOnDisk = 0x4A,
- DAC960_V1_WriteConfigurationOnDisk = 0x4B,
- DAC960_V1_ReadConfiguration = 0x4E,
- DAC960_V1_ReadBackupConfiguration = 0x4D,
- DAC960_V1_WriteConfiguration = 0x4F,
- DAC960_V1_AddConfiguration = 0x4C,
- DAC960_V1_ReadConfigurationLabel = 0x48,
- DAC960_V1_WriteConfigurationLabel = 0x49,
- /* Firmware Upgrade Related Commands */
- DAC960_V1_LoadImage = 0x20,
- DAC960_V1_StoreImage = 0x21,
- DAC960_V1_ProgramImage = 0x22,
- /* Diagnostic Commands */
- DAC960_V1_SetDiagnosticMode = 0x31,
- DAC960_V1_RunDiagnostic = 0x32,
- /* Subsystem Service Commands */
- DAC960_V1_GetSubsystemData = 0x70,
- DAC960_V1_SetSubsystemParameters = 0x71,
- /* Version 2.xx Firmware Commands */
- DAC960_V1_Enquiry_Old = 0x05,
- DAC960_V1_GetDeviceState_Old = 0x14,
- DAC960_V1_Read_Old = 0x02,
- DAC960_V1_Write_Old = 0x03,
- DAC960_V1_ReadWithScatterGather_Old = 0x82,
- DAC960_V1_WriteWithScatterGather_Old = 0x83
-}
-__attribute__ ((packed))
-DAC960_V1_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Identifier type.
-*/
-
-typedef unsigned char DAC960_V1_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Status Codes.
-*/
-
-#define DAC960_V1_NormalCompletion 0x0000 /* Common */
-#define DAC960_V1_CheckConditionReceived 0x0002 /* Common */
-#define DAC960_V1_NoDeviceAtAddress 0x0102 /* Common */
-#define DAC960_V1_InvalidDeviceAddress 0x0105 /* Common */
-#define DAC960_V1_InvalidParameter 0x0105 /* Common */
-#define DAC960_V1_IrrecoverableDataError 0x0001 /* I/O */
-#define DAC960_V1_LogicalDriveNonexistentOrOffline 0x0002 /* I/O */
-#define DAC960_V1_AccessBeyondEndOfLogicalDrive 0x0105 /* I/O */
-#define DAC960_V1_BadDataEncountered 0x010C /* I/O */
-#define DAC960_V1_DeviceBusy 0x0008 /* DCDB */
-#define DAC960_V1_DeviceNonresponsive 0x000E /* DCDB */
-#define DAC960_V1_CommandTerminatedAbnormally 0x000F /* DCDB */
-#define DAC960_V1_UnableToStartDevice 0x0002 /* Device */
-#define DAC960_V1_InvalidChannelOrTargetOrModifier 0x0105 /* Device */
-#define DAC960_V1_ChannelBusy 0x0106 /* Device */
-#define DAC960_V1_ChannelNotStopped 0x0002 /* Device */
-#define DAC960_V1_AttemptToRebuildOnlineDrive 0x0002 /* Consistency */
-#define DAC960_V1_RebuildBadBlocksEncountered 0x0003 /* Consistency */
-#define DAC960_V1_NewDiskFailedDuringRebuild 0x0004 /* Consistency */
-#define DAC960_V1_RebuildOrCheckAlreadyInProgress 0x0106 /* Consistency */
-#define DAC960_V1_DependentDiskIsDead 0x0002 /* Consistency */
-#define DAC960_V1_InconsistentBlocksFound 0x0003 /* Consistency */
-#define DAC960_V1_InvalidOrNonredundantLogicalDrive 0x0105 /* Consistency */
-#define DAC960_V1_NoRebuildOrCheckInProgress 0x0105 /* Consistency */
-#define DAC960_V1_RebuildInProgress_DataValid 0x0000 /* Consistency */
-#define DAC960_V1_RebuildFailed_LogicalDriveFailure 0x0002 /* Consistency */
-#define DAC960_V1_RebuildFailed_BadBlocksOnOther 0x0003 /* Consistency */
-#define DAC960_V1_RebuildFailed_NewDriveFailed 0x0004 /* Consistency */
-#define DAC960_V1_RebuildSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_RebuildSuccessfullyTerminated 0x0107 /* Consistency */
-#define DAC960_V1_BackgroundInitSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_BackgroundInitAborted 0x0005 /* Consistency */
-#define DAC960_V1_NoBackgroundInitInProgress 0x0105 /* Consistency */
-#define DAC960_V1_AddCapacityInProgress 0x0004 /* Consistency */
-#define DAC960_V1_AddCapacityFailedOrSuspended 0x00F4 /* Consistency */
-#define DAC960_V1_Config2ChecksumError 0x0002 /* Configuration */
-#define DAC960_V1_ConfigurationSuspended 0x0106 /* Configuration */
-#define DAC960_V1_FailedToConfigureNVRAM 0x0105 /* Configuration */
-#define DAC960_V1_ConfigurationNotSavedStateChange 0x0106 /* Configuration */
-#define DAC960_V1_SubsystemNotInstalled 0x0001 /* Subsystem */
-#define DAC960_V1_SubsystemFailed 0x0002 /* Subsystem */
-#define DAC960_V1_SubsystemBusy 0x0106 /* Subsystem */
-
-typedef unsigned short DAC960_V1_CommandStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry
-{
- unsigned char NumberOfLogicalDrives; /* Byte 0 */
- unsigned int :24; /* Bytes 1-3 */
- unsigned int LogicalDriveSizes[32]; /* Bytes 4-131 */
- unsigned short FlashAge; /* Bytes 132-133 */
- struct {
- bool DeferredWriteError:1; /* Byte 134 Bit 0 */
- bool BatteryLow:1; /* Byte 134 Bit 1 */
- unsigned char :6; /* Byte 134 Bits 2-7 */
- } StatusFlags;
- unsigned char :8; /* Byte 135 */
- unsigned char MinorFirmwareVersion; /* Byte 136 */
- unsigned char MajorFirmwareVersion; /* Byte 137 */
- enum {
- DAC960_V1_NoStandbyRebuildOrCheckInProgress = 0x00,
- DAC960_V1_StandbyRebuildInProgress = 0x01,
- DAC960_V1_BackgroundRebuildInProgress = 0x02,
- DAC960_V1_BackgroundCheckInProgress = 0x03,
- DAC960_V1_StandbyRebuildCompletedWithError = 0xFF,
- DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed = 0xF0,
- DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed = 0xF1,
- DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses = 0xF2,
- DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated = 0xF3
- } __attribute__ ((packed)) RebuildFlag; /* Byte 138 */
- unsigned char MaxCommands; /* Byte 139 */
- unsigned char OfflineLogicalDriveCount; /* Byte 140 */
- unsigned char :8; /* Byte 141 */
- unsigned short EventLogSequenceNumber; /* Bytes 142-143 */
- unsigned char CriticalLogicalDriveCount; /* Byte 144 */
- unsigned int :24; /* Bytes 145-147 */
- unsigned char DeadDriveCount; /* Byte 148 */
- unsigned char :8; /* Byte 149 */
- unsigned char RebuildCount; /* Byte 150 */
- struct {
- unsigned char :3; /* Byte 151 Bits 0-2 */
- bool BatteryBackupUnitPresent:1; /* Byte 151 Bit 3 */
- unsigned char :3; /* Byte 151 Bits 4-6 */
- unsigned char :1; /* Byte 151 Bit 7 */
- } MiscFlags;
- struct {
- unsigned char TargetID;
- unsigned char Channel;
- } DeadDrives[21]; /* Bytes 152-194 */
- unsigned char Reserved[62]; /* Bytes 195-255 */
-}
-__attribute__ ((packed))
-DAC960_V1_Enquiry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry2
-{
- struct {
- enum {
- DAC960_V1_P_PD_PU = 0x01,
- DAC960_V1_PL = 0x02,
- DAC960_V1_PG = 0x10,
- DAC960_V1_PJ = 0x11,
- DAC960_V1_PR = 0x12,
- DAC960_V1_PT = 0x13,
- DAC960_V1_PTL0 = 0x14,
- DAC960_V1_PRL = 0x15,
- DAC960_V1_PTL1 = 0x16,
- DAC960_V1_1164P = 0x20
- } __attribute__ ((packed)) SubModel; /* Byte 0 */
- unsigned char ActualChannels; /* Byte 1 */
- enum {
- DAC960_V1_FiveChannelBoard = 0x01,
- DAC960_V1_ThreeChannelBoard = 0x02,
- DAC960_V1_TwoChannelBoard = 0x03,
- DAC960_V1_ThreeChannelASIC_DAC = 0x04
- } __attribute__ ((packed)) Model; /* Byte 2 */
- enum {
- DAC960_V1_EISA_Controller = 0x01,
- DAC960_V1_MicroChannel_Controller = 0x02,
- DAC960_V1_PCI_Controller = 0x03,
- DAC960_V1_SCSItoSCSI_Controller = 0x08
- } __attribute__ ((packed)) ProductFamily; /* Byte 3 */
- } HardwareID; /* Bytes 0-3 */
- /* MajorVersion.MinorVersion-FirmwareType-TurnID */
- struct {
- unsigned char MajorVersion; /* Byte 4 */
- unsigned char MinorVersion; /* Byte 5 */
- unsigned char TurnID; /* Byte 6 */
- char FirmwareType; /* Byte 7 */
- } FirmwareID; /* Bytes 4-7 */
- unsigned char :8; /* Byte 8 */
- unsigned int :24; /* Bytes 9-11 */
- unsigned char ConfiguredChannels; /* Byte 12 */
- unsigned char ActualChannels; /* Byte 13 */
- unsigned char MaxTargets; /* Byte 14 */
- unsigned char MaxTags; /* Byte 15 */
- unsigned char MaxLogicalDrives; /* Byte 16 */
- unsigned char MaxArms; /* Byte 17 */
- unsigned char MaxSpans; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int MemorySize; /* Bytes 24-27 */
- unsigned int CacheSize; /* Bytes 28-31 */
- unsigned int FlashMemorySize; /* Bytes 32-35 */
- unsigned int NonVolatileMemorySize; /* Bytes 36-39 */
- struct {
- enum {
- DAC960_V1_RamType_DRAM = 0x0,
- DAC960_V1_RamType_EDO = 0x1,
- DAC960_V1_RamType_SDRAM = 0x2,
- DAC960_V1_RamType_Last = 0x7
- } __attribute__ ((packed)) RamType:3; /* Byte 40 Bits 0-2 */
- enum {
- DAC960_V1_ErrorCorrection_None = 0x0,
- DAC960_V1_ErrorCorrection_Parity = 0x1,
- DAC960_V1_ErrorCorrection_ECC = 0x2,
- DAC960_V1_ErrorCorrection_Last = 0x7
- } __attribute__ ((packed)) ErrorCorrection:3; /* Byte 40 Bits 3-5 */
- bool FastPageMode:1; /* Byte 40 Bit 6 */
- bool LowPowerMemory:1; /* Byte 40 Bit 7 */
- unsigned char :8; /* Bytes 41 */
- } MemoryType;
- unsigned short ClockSpeed; /* Bytes 42-43 */
- unsigned short MemorySpeed; /* Bytes 44-45 */
- unsigned short HardwareSpeed; /* Bytes 46-47 */
- unsigned int :32; /* Bytes 48-51 */
- unsigned int :32; /* Bytes 52-55 */
- unsigned char :8; /* Byte 56 */
- unsigned char :8; /* Byte 57 */
- unsigned short :16; /* Bytes 58-59 */
- unsigned short MaxCommands; /* Bytes 60-61 */
- unsigned short MaxScatterGatherEntries; /* Bytes 62-63 */
- unsigned short MaxDriveCommands; /* Bytes 64-65 */
- unsigned short MaxIODescriptors; /* Bytes 66-67 */
- unsigned short MaxCombinedSectors; /* Bytes 68-69 */
- unsigned char Latency; /* Byte 70 */
- unsigned char :8; /* Byte 71 */
- unsigned char SCSITimeout; /* Byte 72 */
- unsigned char :8; /* Byte 73 */
- unsigned short MinFreeLines; /* Bytes 74-75 */
- unsigned int :32; /* Bytes 76-79 */
- unsigned int :32; /* Bytes 80-83 */
- unsigned char RebuildRateConstant; /* Byte 84 */
- unsigned char :8; /* Byte 85 */
- unsigned char :8; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
- unsigned int :32; /* Bytes 88-91 */
- unsigned int :32; /* Bytes 92-95 */
- unsigned short PhysicalDriveBlockSize; /* Bytes 96-97 */
- unsigned short LogicalDriveBlockSize; /* Bytes 98-99 */
- unsigned short MaxBlocksPerCommand; /* Bytes 100-101 */
- unsigned short BlockFactor; /* Bytes 102-103 */
- unsigned short CacheLineSize; /* Bytes 104-105 */
- struct {
- enum {
- DAC960_V1_Narrow_8bit = 0x0,
- DAC960_V1_Wide_16bit = 0x1,
- DAC960_V1_Wide_32bit = 0x2
- } __attribute__ ((packed)) BusWidth:2; /* Byte 106 Bits 0-1 */
- enum {
- DAC960_V1_Fast = 0x0,
- DAC960_V1_Ultra = 0x1,
- DAC960_V1_Ultra2 = 0x2
- } __attribute__ ((packed)) BusSpeed:2; /* Byte 106 Bits 2-3 */
- bool Differential:1; /* Byte 106 Bit 4 */
- unsigned char :3; /* Byte 106 Bits 5-7 */
- } SCSICapability;
- unsigned char :8; /* Byte 107 */
- unsigned int :32; /* Bytes 108-111 */
- unsigned short FirmwareBuildNumber; /* Bytes 112-113 */
- enum {
- DAC960_V1_AEMI = 0x01,
- DAC960_V1_OEM1 = 0x02,
- DAC960_V1_OEM2 = 0x04,
- DAC960_V1_OEM3 = 0x08,
- DAC960_V1_Conner = 0x10,
- DAC960_V1_SAFTE = 0x20
- } __attribute__ ((packed)) FaultManagementType; /* Byte 114 */
- unsigned char :8; /* Byte 115 */
- struct {
- bool Clustering:1; /* Byte 116 Bit 0 */
- bool MylexOnlineRAIDExpansion:1; /* Byte 116 Bit 1 */
- bool ReadAhead:1; /* Byte 116 Bit 2 */
- bool BackgroundInitialization:1; /* Byte 116 Bit 3 */
- unsigned int :28; /* Bytes 116-119 */
- } FirmwareFeatures;
- unsigned int :32; /* Bytes 120-123 */
- unsigned int :32; /* Bytes 124-127 */
-}
-DAC960_V1_Enquiry2_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive State type.
-*/
-
-typedef enum
-{
- DAC960_V1_LogicalDrive_Online = 0x03,
- DAC960_V1_LogicalDrive_Critical = 0x04,
- DAC960_V1_LogicalDrive_Offline = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V1_LogicalDriveState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive Information structure.
-*/
-
-typedef struct DAC960_V1_LogicalDriveInformation
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- DAC960_V1_LogicalDriveState_T LogicalDriveState; /* Byte 4 */
- unsigned char RAIDLevel:7; /* Byte 5 Bits 0-6 */
- bool WriteBack:1; /* Byte 5 Bit 7 */
- unsigned short :16; /* Bytes 6-7 */
-}
-DAC960_V1_LogicalDriveInformation_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Logical Drive Information Command
- reply structure.
-*/
-
-typedef DAC960_V1_LogicalDriveInformation_T
- DAC960_V1_LogicalDriveInformationArray_T[DAC960_MaxLogicalDrives];
-
-
-/*
- Define the DAC960 V1 Firmware Perform Event Log Operation Types.
-*/
-
-typedef enum
-{
- DAC960_V1_GetEventLogEntry = 0x00
-}
-__attribute__ ((packed))
-DAC960_V1_PerformEventLogOpType_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Event Log Entry Command reply structure.
-*/
-
-typedef struct DAC960_V1_EventLogEntry
-{
- unsigned char MessageType; /* Byte 0 */
- unsigned char MessageLength; /* Byte 1 */
- unsigned char TargetID:5; /* Byte 2 Bits 0-4 */
- unsigned char Channel:3; /* Byte 2 Bits 5-7 */
- unsigned char LogicalUnit:6; /* Byte 3 Bits 0-5 */
- unsigned char :2; /* Byte 3 Bits 6-7 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char ErrorCode:7; /* Byte 6 Bits 0-6 */
- bool Valid:1; /* Byte 6 Bit 7 */
- unsigned char SegmentNumber; /* Byte 7 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 8 Bits 0-3 */
- unsigned char :1; /* Byte 8 Bit 4 */
- bool ILI:1; /* Byte 8 Bit 5 */
- bool EOM:1; /* Byte 8 Bit 6 */
- bool Filemark:1; /* Byte 8 Bit 7 */
- unsigned char Information[4]; /* Bytes 9-12 */
- unsigned char AdditionalSenseLength; /* Byte 13 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 14-17 */
- unsigned char AdditionalSenseCode; /* Byte 18 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 19 */
- unsigned char Dummy[12]; /* Bytes 20-31 */
-}
-DAC960_V1_EventLogEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V1_Device_Dead = 0x00,
- DAC960_V1_Device_WriteOnly = 0x02,
- DAC960_V1_Device_Online = 0x03,
- DAC960_V1_Device_Standby = 0x10
-}
-__attribute__ ((packed))
-DAC960_V1_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Device State Command reply structure.
- The structure is padded by 2 bytes for compatibility with Version 2.xx
- Firmware.
-*/
-
-typedef struct DAC960_V1_DeviceState
-{
- bool Present:1; /* Byte 0 Bit 0 */
- unsigned char :7; /* Byte 0 Bits 1-7 */
- enum {
- DAC960_V1_OtherType = 0x0,
- DAC960_V1_DiskType = 0x1,
- DAC960_V1_SequentialType = 0x2,
- DAC960_V1_CDROM_or_WORM_Type = 0x3
- } __attribute__ ((packed)) DeviceType:2; /* Byte 1 Bits 0-1 */
- bool :1; /* Byte 1 Bit 2 */
- bool Fast20:1; /* Byte 1 Bit 3 */
- bool Sync:1; /* Byte 1 Bit 4 */
- bool Fast:1; /* Byte 1 Bit 5 */
- bool Wide:1; /* Byte 1 Bit 6 */
- bool TaggedQueuingSupported:1; /* Byte 1 Bit 7 */
- DAC960_V1_PhysicalDeviceState_T DeviceState; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned char SynchronousMultiplier; /* Byte 4 */
- unsigned char SynchronousOffset:5; /* Byte 5 Bits 0-4 */
- unsigned char :3; /* Byte 5 Bits 5-7 */
- unsigned int DiskSize __attribute__ ((packed)); /* Bytes 6-9 */
- unsigned short :16; /* Bytes 10-11 */
-}
-DAC960_V1_DeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
-*/
-
-typedef struct DAC960_V1_RebuildProgress
-{
- unsigned int LogicalDriveNumber; /* Bytes 0-3 */
- unsigned int LogicalDriveSize; /* Bytes 4-7 */
- unsigned int RemainingBlocks; /* Bytes 8-11 */
-}
-DAC960_V1_RebuildProgress_T;
-
-
-/*
- Define the DAC960 V1 Firmware Background Initialization Status Command
- reply structure.
-*/
-
-typedef struct DAC960_V1_BackgroundInitializationStatus
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- unsigned int BlocksCompleted; /* Bytes 4-7 */
- unsigned char Reserved1[12]; /* Bytes 8-19 */
- unsigned int LogicalDriveNumber; /* Bytes 20-23 */
- unsigned char RAIDLevel; /* Byte 24 */
- enum {
- DAC960_V1_BackgroundInitializationInvalid = 0x00,
- DAC960_V1_BackgroundInitializationStarted = 0x02,
- DAC960_V1_BackgroundInitializationInProgress = 0x04,
- DAC960_V1_BackgroundInitializationSuspended = 0x05,
- DAC960_V1_BackgroundInitializationCancelled = 0x06
- } __attribute__ ((packed)) Status; /* Byte 25 */
- unsigned char Reserved2[6]; /* Bytes 26-31 */
-}
-DAC960_V1_BackgroundInitializationStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Error Table Entry structure.
-*/
-
-typedef struct DAC960_V1_ErrorTableEntry
-{
- unsigned char ParityErrorCount; /* Byte 0 */
- unsigned char SoftErrorCount; /* Byte 1 */
- unsigned char HardErrorCount; /* Byte 2 */
- unsigned char MiscErrorCount; /* Byte 3 */
-}
-DAC960_V1_ErrorTableEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Error Table Command reply structure.
-*/
-
-typedef struct DAC960_V1_ErrorTable
-{
- DAC960_V1_ErrorTableEntry_T
- ErrorTableEntries[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
-}
-DAC960_V1_ErrorTable_T;
-
-
-/*
- Define the DAC960 V1 Firmware Read Config2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Config2
-{
- unsigned char :1; /* Byte 0 Bit 0 */
- bool ActiveNegationEnabled:1; /* Byte 0 Bit 1 */
- unsigned char :5; /* Byte 0 Bits 2-6 */
- bool NoRescanIfResetReceivedDuringScan:1; /* Byte 0 Bit 7 */
- bool StorageWorksSupportEnabled:1; /* Byte 1 Bit 0 */
- bool HewlettPackardSupportEnabled:1; /* Byte 1 Bit 1 */
- bool NoDisconnectOnFirstCommand:1; /* Byte 1 Bit 2 */
- unsigned char :2; /* Byte 1 Bits 3-4 */
- bool AEMI_ARM:1; /* Byte 1 Bit 5 */
- bool AEMI_OFM:1; /* Byte 1 Bit 6 */
- unsigned char :1; /* Byte 1 Bit 7 */
- enum {
- DAC960_V1_OEMID_Mylex = 0x00,
- DAC960_V1_OEMID_IBM = 0x08,
- DAC960_V1_OEMID_HP = 0x0A,
- DAC960_V1_OEMID_DEC = 0x0C,
- DAC960_V1_OEMID_Siemens = 0x10,
- DAC960_V1_OEMID_Intel = 0x12
- } __attribute__ ((packed)) OEMID; /* Byte 2 */
- unsigned char OEMModelNumber; /* Byte 3 */
- unsigned char PhysicalSector; /* Byte 4 */
- unsigned char LogicalSector; /* Byte 5 */
- unsigned char BlockFactor; /* Byte 6 */
- bool ReadAheadEnabled:1; /* Byte 7 Bit 0 */
- bool LowBIOSDelay:1; /* Byte 7 Bit 1 */
- unsigned char :2; /* Byte 7 Bits 2-3 */
- bool ReassignRestrictedToOneSector:1; /* Byte 7 Bit 4 */
- unsigned char :1; /* Byte 7 Bit 5 */
- bool ForceUnitAccessDuringWriteRecovery:1; /* Byte 7 Bit 6 */
- bool EnableLeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */
- unsigned char DefaultRebuildRate; /* Byte 8 */
- unsigned char :8; /* Byte 9 */
- unsigned char BlocksPerCacheLine; /* Byte 10 */
- unsigned char BlocksPerStripe; /* Byte 11 */
- struct {
- enum {
- DAC960_V1_Async = 0x0,
- DAC960_V1_Sync_8MHz = 0x1,
- DAC960_V1_Sync_5MHz = 0x2,
- DAC960_V1_Sync_10or20MHz = 0x3 /* Byte 11 Bits 0-1 */
- } __attribute__ ((packed)) Speed:2;
- bool Force8Bit:1; /* Byte 11 Bit 2 */
- bool DisableFast20:1; /* Byte 11 Bit 3 */
- unsigned char :3; /* Byte 11 Bits 4-6 */
- bool EnableTaggedQueuing:1; /* Byte 11 Bit 7 */
- } __attribute__ ((packed)) ChannelParameters[6]; /* Bytes 12-17 */
- unsigned char SCSIInitiatorID; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- enum {
- DAC960_V1_StartupMode_ControllerSpinUp = 0x00,
- DAC960_V1_StartupMode_PowerOnSpinUp = 0x01
- } __attribute__ ((packed)) StartupMode; /* Byte 20 */
- unsigned char SimultaneousDeviceSpinUpCount; /* Byte 21 */
- unsigned char SecondsDelayBetweenSpinUps; /* Byte 22 */
- unsigned char Reserved1[29]; /* Bytes 23-51 */
- bool BIOSDisabled:1; /* Byte 52 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 52 Bit 1 */
- unsigned char :3; /* Byte 52 Bits 2-4 */
- enum {
- DAC960_V1_Geometry_128_32 = 0x0,
- DAC960_V1_Geometry_255_63 = 0x1,
- DAC960_V1_Geometry_Reserved1 = 0x2,
- DAC960_V1_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 52 Bits 5-6 */
- unsigned char :1; /* Byte 52 Bit 7 */
- unsigned char Reserved2[9]; /* Bytes 53-61 */
- unsigned short Checksum; /* Bytes 62-63 */
-}
-DAC960_V1_Config2_T;
-
-
-/*
- Define the DAC960 V1 Firmware DCDB request structure.
-*/
-
-typedef struct DAC960_V1_DCDB
-{
- unsigned char TargetID:4; /* Byte 0 Bits 0-3 */
- unsigned char Channel:4; /* Byte 0 Bits 4-7 */
- enum {
- DAC960_V1_DCDB_NoDataTransfer = 0,
- DAC960_V1_DCDB_DataTransferDeviceToSystem = 1,
- DAC960_V1_DCDB_DataTransferSystemToDevice = 2,
- DAC960_V1_DCDB_IllegalDataTransfer = 3
- } __attribute__ ((packed)) Direction:2; /* Byte 1 Bits 0-1 */
- bool EarlyStatus:1; /* Byte 1 Bit 2 */
- unsigned char :1; /* Byte 1 Bit 3 */
- enum {
- DAC960_V1_DCDB_Timeout_24_hours = 0,
- DAC960_V1_DCDB_Timeout_10_seconds = 1,
- DAC960_V1_DCDB_Timeout_60_seconds = 2,
- DAC960_V1_DCDB_Timeout_10_minutes = 3
- } __attribute__ ((packed)) Timeout:2; /* Byte 1 Bits 4-5 */
- bool NoAutomaticRequestSense:1; /* Byte 1 Bit 6 */
- bool DisconnectPermitted:1; /* Byte 1 Bit 7 */
- unsigned short TransferLength; /* Bytes 2-3 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 4-7 */
- unsigned char CDBLength:4; /* Byte 8 Bits 0-3 */
- unsigned char TransferLengthHigh4:4; /* Byte 8 Bits 4-7 */
- unsigned char SenseLength; /* Byte 9 */
- unsigned char CDB[12]; /* Bytes 10-21 */
- unsigned char SenseData[64]; /* Bytes 22-85 */
- unsigned char Status; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
-}
-DAC960_V1_DCDB_T;
-
-
-/*
- Define the DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
- 32 Bit Byte Count structure.
-*/
-
-typedef struct DAC960_V1_ScatterGatherSegment
-{
- DAC960_BusAddress32_T SegmentDataPointer; /* Bytes 0-3 */
- DAC960_ByteCount32_T SegmentByteCount; /* Bytes 4-7 */
-}
-DAC960_V1_ScatterGatherSegment_T;
-
-
-/*
- Define the 13 Byte DAC960 V1 Firmware Command Mailbox structure. Bytes 13-15
- are not used. The Command Mailbox structure is padded to 16 bytes for
- efficient access.
-*/
-
-typedef union DAC960_V1_CommandMailbox
-{
- unsigned int Words[4]; /* Words 0-3 */
- unsigned char Bytes[16]; /* Bytes 0-15 */
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy[14]; /* Bytes 2-15 */
- } __attribute__ ((packed)) Common;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[6]; /* Bytes 2-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char Dummy1[5]; /* Bytes 3-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3B;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[5]; /* Bytes 2-6 */
- unsigned char LogicalDriveNumber:6; /* Byte 7 Bits 0-6 */
- bool AutoRestore:1; /* Byte 7 Bit 7 */
- unsigned char Dummy2[8]; /* Bytes 8-15 */
- } __attribute__ ((packed)) Type3C;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Channel; /* Byte 2 */
- unsigned char TargetID; /* Byte 3 */
- DAC960_V1_PhysicalDeviceState_T DeviceState:5; /* Byte 4 Bits 0-4 */
- unsigned char Modifier:3; /* Byte 4 Bits 5-7 */
- unsigned char Dummy1[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3D;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- DAC960_V1_PerformEventLogOpType_T OperationType; /* Byte 2 */
- unsigned char OperationQualifier; /* Byte 3 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char Dummy1[2]; /* Bytes 6-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3E;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[2]; /* Bytes 2-3 */
- unsigned char RebuildRateConstant; /* Byte 4 */
- unsigned char Dummy2[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy3[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3R;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned short TransferLength; /* Bytes 2-3 */
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char LogicalDriveNumber; /* Byte 12 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type4;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- struct {
- unsigned short TransferLength:11; /* Bytes 2-3 */
- unsigned char LogicalDriveNumber:5; /* Byte 3 Bits 3-7 */
- } __attribute__ ((packed)) LD;
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char ScatterGatherCount:6; /* Byte 12 Bits 0-5 */
- enum {
- DAC960_V1_ScatterGather_32BitAddress_32BitByteCount = 0x0,
- DAC960_V1_ScatterGather_32BitAddress_16BitByteCount = 0x1,
- DAC960_V1_ScatterGather_32BitByteCount_32BitAddress = 0x2,
- DAC960_V1_ScatterGather_16BitByteCount_32BitAddress = 0x3
- } __attribute__ ((packed)) ScatterGatherType:2; /* Byte 12 Bits 6-7 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type5;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- DAC960_BusAddress32_T CommandMailboxesBusAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T StatusMailboxesBusAddress; /* Bytes 8-11 */
- unsigned char Dummy[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) TypeX;
-}
-DAC960_V1_CommandMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_MemCopy = 0x01,
- DAC960_V2_SCSI_10_Passthru = 0x02,
- DAC960_V2_SCSI_255_Passthru = 0x03,
- DAC960_V2_SCSI_10 = 0x04,
- DAC960_V2_SCSI_256 = 0x05,
- DAC960_V2_IOCTL = 0x20
-}
-__attribute__ ((packed))
-DAC960_V2_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware IOCTL Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_GetControllerInfo = 0x01,
- DAC960_V2_GetLogicalDeviceInfoValid = 0x03,
- DAC960_V2_GetPhysicalDeviceInfoValid = 0x05,
- DAC960_V2_GetHealthStatus = 0x11,
- DAC960_V2_GetEvent = 0x15,
- DAC960_V2_StartDiscovery = 0x81,
- DAC960_V2_SetDeviceState = 0x82,
- DAC960_V2_RebuildDeviceStart = 0x88,
- DAC960_V2_RebuildDeviceStop = 0x89,
- DAC960_V2_ConsistencyCheckStart = 0x8C,
- DAC960_V2_ConsistencyCheckStop = 0x8D,
- DAC960_V2_SetMemoryMailbox = 0x8E,
- DAC960_V2_PauseDevice = 0x92,
- DAC960_V2_TranslatePhysicalToLogicalDevice = 0xC5
-}
-__attribute__ ((packed))
-DAC960_V2_IOCTL_Opcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Identifier type.
-*/
-
-typedef unsigned short DAC960_V2_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Status Codes.
-*/
-
-#define DAC960_V2_NormalCompletion 0x00
-#define DAC960_V2_AbormalCompletion 0x02
-#define DAC960_V2_DeviceBusy 0x08
-#define DAC960_V2_DeviceNonresponsive 0x0E
-#define DAC960_V2_DeviceNonresponsive2 0x0F
-#define DAC960_V2_DeviceRevervationConflict 0x18
-
-typedef unsigned char DAC960_V2_CommandStatus_T;
-
-
-/*
- Define the DAC960 V2 Firmware Memory Type structure.
-*/
-
-typedef struct DAC960_V2_MemoryType
-{
- enum {
- DAC960_V2_MemoryType_Reserved = 0x00,
- DAC960_V2_MemoryType_DRAM = 0x01,
- DAC960_V2_MemoryType_EDRAM = 0x02,
- DAC960_V2_MemoryType_EDO = 0x03,
- DAC960_V2_MemoryType_SDRAM = 0x04,
- DAC960_V2_MemoryType_Last = 0x1F
- } __attribute__ ((packed)) MemoryType:5; /* Byte 0 Bits 0-4 */
- bool :1; /* Byte 0 Bit 5 */
- bool MemoryParity:1; /* Byte 0 Bit 6 */
- bool MemoryECC:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_MemoryType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Processor Type structure.
-*/
-
-typedef enum
-{
- DAC960_V2_ProcessorType_i960CA = 0x01,
- DAC960_V2_ProcessorType_i960RD = 0x02,
- DAC960_V2_ProcessorType_i960RN = 0x03,
- DAC960_V2_ProcessorType_i960RP = 0x04,
- DAC960_V2_ProcessorType_NorthBay = 0x05,
- DAC960_V2_ProcessorType_StrongArm = 0x06,
- DAC960_V2_ProcessorType_i960RM = 0x07
-}
-__attribute__ ((packed))
-DAC960_V2_ProcessorType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Controller Info reply structure.
-*/
-
-typedef struct DAC960_V2_ControllerInfo
-{
- unsigned char :8; /* Byte 0 */
- enum {
- DAC960_V2_SCSI_Bus = 0x00,
- DAC960_V2_Fibre_Bus = 0x01,
- DAC960_V2_PCI_Bus = 0x03
- } __attribute__ ((packed)) BusInterfaceType; /* Byte 1 */
- enum {
- DAC960_V2_DAC960E = 0x01,
- DAC960_V2_DAC960M = 0x08,
- DAC960_V2_DAC960PD = 0x10,
- DAC960_V2_DAC960PL = 0x11,
- DAC960_V2_DAC960PU = 0x12,
- DAC960_V2_DAC960PE = 0x13,
- DAC960_V2_DAC960PG = 0x14,
- DAC960_V2_DAC960PJ = 0x15,
- DAC960_V2_DAC960PTL0 = 0x16,
- DAC960_V2_DAC960PR = 0x17,
- DAC960_V2_DAC960PRL = 0x18,
- DAC960_V2_DAC960PT = 0x19,
- DAC960_V2_DAC1164P = 0x1A,
- DAC960_V2_DAC960PTL1 = 0x1B,
- DAC960_V2_EXR2000P = 0x1C,
- DAC960_V2_EXR3000P = 0x1D,
- DAC960_V2_AcceleRAID352 = 0x1E,
- DAC960_V2_AcceleRAID170 = 0x1F,
- DAC960_V2_AcceleRAID160 = 0x20,
- DAC960_V2_DAC960S = 0x60,
- DAC960_V2_DAC960SU = 0x61,
- DAC960_V2_DAC960SX = 0x62,
- DAC960_V2_DAC960SF = 0x63,
- DAC960_V2_DAC960SS = 0x64,
- DAC960_V2_DAC960FL = 0x65,
- DAC960_V2_DAC960LL = 0x66,
- DAC960_V2_DAC960FF = 0x67,
- DAC960_V2_DAC960HP = 0x68,
- DAC960_V2_RAIDBRICK = 0x69,
- DAC960_V2_METEOR_FL = 0x6A,
- DAC960_V2_METEOR_FF = 0x6B
- } __attribute__ ((packed)) ControllerType; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned short BusInterfaceSpeedMHz; /* Bytes 4-5 */
- unsigned char BusWidthBits; /* Byte 6 */
- unsigned char FlashCodeTypeOrProductID; /* Byte 7 */
- unsigned char NumberOfHostPortsPresent; /* Byte 8 */
- unsigned char Reserved1[7]; /* Bytes 9-15 */
- unsigned char BusInterfaceName[16]; /* Bytes 16-31 */
- unsigned char ControllerName[16]; /* Bytes 32-47 */
- unsigned char Reserved2[16]; /* Bytes 48-63 */
- /* Firmware Release Information */
- unsigned char FirmwareMajorVersion; /* Byte 64 */
- unsigned char FirmwareMinorVersion; /* Byte 65 */
- unsigned char FirmwareTurnNumber; /* Byte 66 */
- unsigned char FirmwareBuildNumber; /* Byte 67 */
- unsigned char FirmwareReleaseDay; /* Byte 68 */
- unsigned char FirmwareReleaseMonth; /* Byte 69 */
- unsigned char FirmwareReleaseYearHigh2Digits; /* Byte 70 */
- unsigned char FirmwareReleaseYearLow2Digits; /* Byte 71 */
- /* Hardware Release Information */
- unsigned char HardwareRevision; /* Byte 72 */
- unsigned int :24; /* Bytes 73-75 */
- unsigned char HardwareReleaseDay; /* Byte 76 */
- unsigned char HardwareReleaseMonth; /* Byte 77 */
- unsigned char HardwareReleaseYearHigh2Digits; /* Byte 78 */
- unsigned char HardwareReleaseYearLow2Digits; /* Byte 79 */
- /* Hardware Manufacturing Information */
- unsigned char ManufacturingBatchNumber; /* Byte 80 */
- unsigned char :8; /* Byte 81 */
- unsigned char ManufacturingPlantNumber; /* Byte 82 */
- unsigned char :8; /* Byte 83 */
- unsigned char HardwareManufacturingDay; /* Byte 84 */
- unsigned char HardwareManufacturingMonth; /* Byte 85 */
- unsigned char HardwareManufacturingYearHigh2Digits; /* Byte 86 */
- unsigned char HardwareManufacturingYearLow2Digits; /* Byte 87 */
- unsigned char MaximumNumberOfPDDperXLD; /* Byte 88 */
- unsigned char MaximumNumberOfILDperXLD; /* Byte 89 */
- unsigned short NonvolatileMemorySizeKB; /* Bytes 90-91 */
- unsigned char MaximumNumberOfXLD; /* Byte 92 */
- unsigned int :24; /* Bytes 93-95 */
- /* Unique Information per Controller */
- unsigned char ControllerSerialNumber[16]; /* Bytes 96-111 */
- unsigned char Reserved3[16]; /* Bytes 112-127 */
- /* Vendor Information */
- unsigned int :24; /* Bytes 128-130 */
- unsigned char OEM_Code; /* Byte 131 */
- unsigned char VendorName[16]; /* Bytes 132-147 */
- /* Other Physical/Controller/Operation Information */
- bool BBU_Present:1; /* Byte 148 Bit 0 */
- bool ActiveActiveClusteringMode:1; /* Byte 148 Bit 1 */
- unsigned char :6; /* Byte 148 Bits 2-7 */
- unsigned char :8; /* Byte 149 */
- unsigned short :16; /* Bytes 150-151 */
- /* Physical Device Scan Information */
- bool PhysicalScanActive:1; /* Byte 152 Bit 0 */
- unsigned char :7; /* Byte 152 Bits 1-7 */
- unsigned char PhysicalDeviceChannelNumber; /* Byte 153 */
- unsigned char PhysicalDeviceTargetID; /* Byte 154 */
- unsigned char PhysicalDeviceLogicalUnit; /* Byte 155 */
- /* Maximum Command Data Transfer Sizes */
- unsigned short MaximumDataTransferSizeInBlocks; /* Bytes 156-157 */
- unsigned short MaximumScatterGatherEntries; /* Bytes 158-159 */
- /* Logical/Physical Device Counts */
- unsigned short LogicalDevicesPresent; /* Bytes 160-161 */
- unsigned short LogicalDevicesCritical; /* Bytes 162-163 */
- unsigned short LogicalDevicesOffline; /* Bytes 164-165 */
- unsigned short PhysicalDevicesPresent; /* Bytes 166-167 */
- unsigned short PhysicalDisksPresent; /* Bytes 168-169 */
- unsigned short PhysicalDisksCritical; /* Bytes 170-171 */
- unsigned short PhysicalDisksOffline; /* Bytes 172-173 */
- unsigned short MaximumParallelCommands; /* Bytes 174-175 */
- /* Channel and Target ID Information */
- unsigned char NumberOfPhysicalChannelsPresent; /* Byte 176 */
- unsigned char NumberOfVirtualChannelsPresent; /* Byte 177 */
- unsigned char NumberOfPhysicalChannelsPossible; /* Byte 178 */
- unsigned char NumberOfVirtualChannelsPossible; /* Byte 179 */
- unsigned char MaximumTargetsPerChannel[16]; /* Bytes 180-195 */
- unsigned char Reserved4[12]; /* Bytes 196-207 */
- /* Memory/Cache Information */
- unsigned short MemorySizeMB; /* Bytes 208-209 */
- unsigned short CacheSizeMB; /* Bytes 210-211 */
- unsigned int ValidCacheSizeInBytes; /* Bytes 212-215 */
- unsigned int DirtyCacheSizeInBytes; /* Bytes 216-219 */
- unsigned short MemorySpeedMHz; /* Bytes 220-221 */
- unsigned char MemoryDataWidthBits; /* Byte 222 */
- DAC960_V2_MemoryType_T MemoryType; /* Byte 223 */
- unsigned char CacheMemoryTypeName[16]; /* Bytes 224-239 */
- /* Execution Memory Information */
- unsigned short ExecutionMemorySizeMB; /* Bytes 240-241 */
- unsigned short ExecutionL2CacheSizeMB; /* Bytes 242-243 */
- unsigned char Reserved5[8]; /* Bytes 244-251 */
- unsigned short ExecutionMemorySpeedMHz; /* Bytes 252-253 */
- unsigned char ExecutionMemoryDataWidthBits; /* Byte 254 */
- DAC960_V2_MemoryType_T ExecutionMemoryType; /* Byte 255 */
- unsigned char ExecutionMemoryTypeName[16]; /* Bytes 256-271 */
- /* First CPU Type Information */
- unsigned short FirstProcessorSpeedMHz; /* Bytes 272-273 */
- DAC960_V2_ProcessorType_T FirstProcessorType; /* Byte 274 */
- unsigned char FirstProcessorCount; /* Byte 275 */
- unsigned char Reserved6[12]; /* Bytes 276-287 */
- unsigned char FirstProcessorName[16]; /* Bytes 288-303 */
- /* Second CPU Type Information */
- unsigned short SecondProcessorSpeedMHz; /* Bytes 304-305 */
- DAC960_V2_ProcessorType_T SecondProcessorType; /* Byte 306 */
- unsigned char SecondProcessorCount; /* Byte 307 */
- unsigned char Reserved7[12]; /* Bytes 308-319 */
- unsigned char SecondProcessorName[16]; /* Bytes 320-335 */
- /* Debugging/Profiling/Command Time Tracing Information */
- unsigned short CurrentProfilingDataPageNumber; /* Bytes 336-337 */
- unsigned short ProgramsAwaitingProfilingData; /* Bytes 338-339 */
- unsigned short CurrentCommandTimeTraceDataPageNumber; /* Bytes 340-341 */
- unsigned short ProgramsAwaitingCommandTimeTraceData; /* Bytes 342-343 */
- unsigned char Reserved8[8]; /* Bytes 344-351 */
- /* Error Counters on Physical Devices */
- unsigned short PhysicalDeviceBusResets; /* Bytes 352-353 */
- unsigned short PhysicalDeviceParityErrors; /* Bytes 355-355 */
- unsigned short PhysicalDeviceSoftErrors; /* Bytes 356-357 */
- unsigned short PhysicalDeviceCommandsFailed; /* Bytes 358-359 */
- unsigned short PhysicalDeviceMiscellaneousErrors; /* Bytes 360-361 */
- unsigned short PhysicalDeviceCommandTimeouts; /* Bytes 362-363 */
- unsigned short PhysicalDeviceSelectionTimeouts; /* Bytes 364-365 */
- unsigned short PhysicalDeviceRetriesDone; /* Bytes 366-367 */
- unsigned short PhysicalDeviceAbortsDone; /* Bytes 368-369 */
- unsigned short PhysicalDeviceHostCommandAbortsDone; /* Bytes 370-371 */
- unsigned short PhysicalDevicePredictedFailuresDetected; /* Bytes 372-373 */
- unsigned short PhysicalDeviceHostCommandsFailed; /* Bytes 374-375 */
- unsigned short PhysicalDeviceHardErrors; /* Bytes 376-377 */
- unsigned char Reserved9[6]; /* Bytes 378-383 */
- /* Error Counters on Logical Devices */
- unsigned short LogicalDeviceSoftErrors; /* Bytes 384-385 */
- unsigned short LogicalDeviceCommandsFailed; /* Bytes 386-387 */
- unsigned short LogicalDeviceHostCommandAbortsDone; /* Bytes 388-389 */
- unsigned short :16; /* Bytes 390-391 */
- /* Error Counters on Controller */
- unsigned short ControllerMemoryErrors; /* Bytes 392-393 */
- unsigned short ControllerHostCommandAbortsDone; /* Bytes 394-395 */
- unsigned int :32; /* Bytes 396-399 */
- /* Long Duration Activity Information */
- unsigned short BackgroundInitializationsActive; /* Bytes 400-401 */
- unsigned short LogicalDeviceInitializationsActive; /* Bytes 402-403 */
- unsigned short PhysicalDeviceInitializationsActive; /* Bytes 404-405 */
- unsigned short ConsistencyChecksActive; /* Bytes 406-407 */
- unsigned short RebuildsActive; /* Bytes 408-409 */
- unsigned short OnlineExpansionsActive; /* Bytes 410-411 */
- unsigned short PatrolActivitiesActive; /* Bytes 412-413 */
- unsigned short :16; /* Bytes 414-415 */
- /* Flash ROM Information */
- unsigned char FlashType; /* Byte 416 */
- unsigned char :8; /* Byte 417 */
- unsigned short FlashSizeMB; /* Bytes 418-419 */
- unsigned int FlashLimit; /* Bytes 420-423 */
- unsigned int FlashCount; /* Bytes 424-427 */
- unsigned int :32; /* Bytes 428-431 */
- unsigned char FlashTypeName[16]; /* Bytes 432-447 */
- /* Firmware Run Time Information */
- unsigned char RebuildRate; /* Byte 448 */
- unsigned char BackgroundInitializationRate; /* Byte 449 */
- unsigned char ForegroundInitializationRate; /* Byte 450 */
- unsigned char ConsistencyCheckRate; /* Byte 451 */
- unsigned int :32; /* Bytes 452-455 */
- unsigned int MaximumDP; /* Bytes 456-459 */
- unsigned int FreeDP; /* Bytes 460-463 */
- unsigned int MaximumIOP; /* Bytes 464-467 */
- unsigned int FreeIOP; /* Bytes 468-471 */
- unsigned short MaximumCombLengthInBlocks; /* Bytes 472-473 */
- unsigned short NumberOfConfigurationGroups; /* Bytes 474-475 */
- bool InstallationAbortStatus:1; /* Byte 476 Bit 0 */
- bool MaintenanceModeStatus:1; /* Byte 476 Bit 1 */
- unsigned int :24; /* Bytes 476-479 */
- unsigned char Reserved10[32]; /* Bytes 480-511 */
- unsigned char Reserved11[512]; /* Bytes 512-1023 */
-}
-DAC960_V2_ControllerInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_LogicalDevice_Online = 0x01,
- DAC960_V2_LogicalDevice_Offline = 0x08,
- DAC960_V2_LogicalDevice_Critical = 0x09
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Logical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_LogicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState; /* Byte 4 */
- unsigned char RAIDLevel; /* Byte 5 */
- unsigned char StripeSize; /* Byte 6 */
- unsigned char CacheLineSize; /* Byte 7 */
- struct {
- enum {
- DAC960_V2_ReadCacheDisabled = 0x0,
- DAC960_V2_ReadCacheEnabled = 0x1,
- DAC960_V2_ReadAheadEnabled = 0x2,
- DAC960_V2_IntelligentReadAheadEnabled = 0x3,
- DAC960_V2_ReadCache_Last = 0x7
- } __attribute__ ((packed)) ReadCache:3; /* Byte 8 Bits 0-2 */
- enum {
- DAC960_V2_WriteCacheDisabled = 0x0,
- DAC960_V2_LogicalDeviceReadOnly = 0x1,
- DAC960_V2_WriteCacheEnabled = 0x2,
- DAC960_V2_IntelligentWriteCacheEnabled = 0x3,
- DAC960_V2_WriteCache_Last = 0x7
- } __attribute__ ((packed)) WriteCache:3; /* Byte 8 Bits 3-5 */
- bool :1; /* Byte 8 Bit 6 */
- bool LogicalDeviceInitialized:1; /* Byte 8 Bit 7 */
- } LogicalDeviceControl; /* Byte 8 */
- /* Logical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 9 Bit 0 */
- bool RebuildInProgress:1; /* Byte 9 Bit 1 */
- bool BackgroundInitializationInProgress:1; /* Byte 9 Bit 2 */
- bool ForegroundInitializationInProgress:1; /* Byte 9 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 9 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 9 Bit 5 */
- unsigned char :2; /* Byte 9 Bits 6-7 */
- unsigned char RAID5WriteUpdate; /* Byte 10 */
- unsigned char RAID5Algorithm; /* Byte 11 */
- unsigned short LogicalDeviceNumber; /* Bytes 12-13 */
- /* BIOS Info */
- bool BIOSDisabled:1; /* Byte 14 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 14 Bit 1 */
- bool DriveCoercionEnabled:1; /* Byte 14 Bit 2 */
- bool WriteSameDisabled:1; /* Byte 14 Bit 3 */
- bool HBA_ModeEnabled:1; /* Byte 14 Bit 4 */
- enum {
- DAC960_V2_Geometry_128_32 = 0x0,
- DAC960_V2_Geometry_255_63 = 0x1,
- DAC960_V2_Geometry_Reserved1 = 0x2,
- DAC960_V2_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 14 Bits 5-6 */
- bool SuperReadAheadEnabled:1; /* Byte 14 Bit 7 */
- unsigned char :8; /* Byte 15 */
- /* Error Counters */
- unsigned short SoftErrors; /* Bytes 16-17 */
- unsigned short CommandsFailed; /* Bytes 18-19 */
- unsigned short HostCommandAbortsDone; /* Bytes 20-21 */
- unsigned short DeferredWriteErrors; /* Bytes 22-23 */
- unsigned int :32; /* Bytes 24-27 */
- unsigned int :32; /* Bytes 28-31 */
- /* Device Size Information */
- unsigned short :16; /* Bytes 32-33 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 34-35 */
- unsigned int OriginalDeviceSize; /* Bytes 36-39 */
- unsigned int ConfigurableDeviceSize; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char LogicalDeviceName[32]; /* Bytes 48-79 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 80-115 */
- unsigned char Reserved1[12]; /* Bytes 116-127 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 128-135 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 136-143 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 144-151 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 152-159 */
- DAC960_ByteCount64_T BackgroundInitializationBlockNumber; /* Bytes 160-167 */
- DAC960_ByteCount64_T ForegroundInitializationBlockNumber; /* Bytes 168-175 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 176-183 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 184-191 */
- unsigned char Reserved2[64]; /* Bytes 192-255 */
-}
-DAC960_V2_LogicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_Device_Unconfigured = 0x00,
- DAC960_V2_Device_Online = 0x01,
- DAC960_V2_Device_Rebuild = 0x03,
- DAC960_V2_Device_Missing = 0x04,
- DAC960_V2_Device_Critical = 0x05,
- DAC960_V2_Device_Dead = 0x08,
- DAC960_V2_Device_SuspectedDead = 0x0C,
- DAC960_V2_Device_CommandedOffline = 0x10,
- DAC960_V2_Device_Standby = 0x21,
- DAC960_V2_Device_InvalidState = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Physical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- /* Configuration Status Bits */
- bool PhysicalDeviceFaultTolerant:1; /* Byte 4 Bit 0 */
- bool PhysicalDeviceConnected:1; /* Byte 4 Bit 1 */
- bool PhysicalDeviceLocalToController:1; /* Byte 4 Bit 2 */
- unsigned char :5; /* Byte 4 Bits 3-7 */
- /* Multiple Host/Controller Status Bits */
- bool RemoteHostSystemDead:1; /* Byte 5 Bit 0 */
- bool RemoteControllerDead:1; /* Byte 5 Bit 1 */
- unsigned char :6; /* Byte 5 Bits 2-7 */
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; /* Byte 6 */
- unsigned char NegotiatedDataWidthBits; /* Byte 7 */
- unsigned short NegotiatedSynchronousMegaTransfers; /* Bytes 8-9 */
- /* Multiported Physical Device Information */
- unsigned char NumberOfPortConnections; /* Byte 10 */
- unsigned char DriveAccessibilityBitmap; /* Byte 11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned char NetworkAddress[16]; /* Bytes 16-31 */
- unsigned short MaximumTags; /* Bytes 32-33 */
- /* Physical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 34 Bit 0 */
- bool RebuildInProgress:1; /* Byte 34 Bit 1 */
- bool MakingDataConsistentInProgress:1; /* Byte 34 Bit 2 */
- bool PhysicalDeviceInitializationInProgress:1; /* Byte 34 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 34 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 34 Bit 5 */
- unsigned char :2; /* Byte 34 Bits 6-7 */
- unsigned char LongOperationStatus; /* Byte 35 */
- unsigned char ParityErrors; /* Byte 36 */
- unsigned char SoftErrors; /* Byte 37 */
- unsigned char HardErrors; /* Byte 38 */
- unsigned char MiscellaneousErrors; /* Byte 39 */
- unsigned char CommandTimeouts; /* Byte 40 */
- unsigned char Retries; /* Byte 41 */
- unsigned char Aborts; /* Byte 42 */
- unsigned char PredictedFailuresDetected; /* Byte 43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned short :16; /* Bytes 48-49 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 50-51 */
- unsigned int OriginalDeviceSize; /* Bytes 52-55 */
- unsigned int ConfigurableDeviceSize; /* Bytes 56-59 */
- unsigned int :32; /* Bytes 60-63 */
- unsigned char PhysicalDeviceName[16]; /* Bytes 64-79 */
- unsigned char Reserved1[16]; /* Bytes 80-95 */
- unsigned char Reserved2[32]; /* Bytes 96-127 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 128-163 */
- unsigned char Reserved3[20]; /* Bytes 164-183 */
- unsigned char Reserved4[8]; /* Bytes 184-191 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 192-199 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 200-207 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 208-215 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 216-223 */
- DAC960_ByteCount64_T MakingDataConsistentBlockNumber; /* Bytes 224-231 */
- DAC960_ByteCount64_T DeviceInitializationBlockNumber; /* Bytes 232-239 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 240-247 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 248-255 */
- unsigned char Reserved5[256]; /* Bytes 256-511 */
-}
-DAC960_V2_PhysicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Health Status Buffer structure.
-*/
-
-typedef struct DAC960_V2_HealthStatusBuffer
-{
- unsigned int MicrosecondsFromControllerStartTime; /* Bytes 0-3 */
- unsigned int MillisecondsFromControllerStartTime; /* Bytes 4-7 */
- unsigned int SecondsFrom1January1970; /* Bytes 8-11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned int StatusChangeCounter; /* Bytes 16-19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int DebugOutputMessageBufferIndex; /* Bytes 24-27 */
- unsigned int CodedMessageBufferIndex; /* Bytes 28-31 */
- unsigned int CurrentTimeTracePageNumber; /* Bytes 32-35 */
- unsigned int CurrentProfilerPageNumber; /* Bytes 36-39 */
- unsigned int NextEventSequenceNumber; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char Reserved1[16]; /* Bytes 48-63 */
- unsigned char Reserved2[64]; /* Bytes 64-127 */
-}
-DAC960_V2_HealthStatusBuffer_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Event reply structure.
-*/
-
-typedef struct DAC960_V2_Event
-{
- unsigned int EventSequenceNumber; /* Bytes 0-3 */
- unsigned int EventTime; /* Bytes 4-7 */
- unsigned int EventCode; /* Bytes 8-11 */
- unsigned char :8; /* Byte 12 */
- unsigned char Channel; /* Byte 13 */
- unsigned char TargetID; /* Byte 14 */
- unsigned char LogicalUnit; /* Byte 15 */
- unsigned int :32; /* Bytes 16-19 */
- unsigned int EventSpecificParameter; /* Bytes 20-23 */
- unsigned char RequestSenseData[40]; /* Bytes 24-63 */
-}
-DAC960_V2_Event_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Control Bits structure.
-*/
-
-typedef struct DAC960_V2_CommandControlBits
-{
- bool ForceUnitAccess:1; /* Byte 0 Bit 0 */
- bool DisablePageOut:1; /* Byte 0 Bit 1 */
- bool :1; /* Byte 0 Bit 2 */
- bool AdditionalScatterGatherListMemory:1; /* Byte 0 Bit 3 */
- bool DataTransferControllerToHost:1; /* Byte 0 Bit 4 */
- bool :1; /* Byte 0 Bit 5 */
- bool NoAutoRequestSense:1; /* Byte 0 Bit 6 */
- bool DisconnectProhibited:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_CommandControlBits_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Timeout structure.
-*/
-
-typedef struct DAC960_V2_CommandTimeout
-{
- unsigned char TimeoutValue:6; /* Byte 0 Bits 0-5 */
- enum {
- DAC960_V2_TimeoutScale_Seconds = 0,
- DAC960_V2_TimeoutScale_Minutes = 1,
- DAC960_V2_TimeoutScale_Hours = 2,
- DAC960_V2_TimeoutScale_Reserved = 3
- } __attribute__ ((packed)) TimeoutScale:2; /* Byte 0 Bits 6-7 */
-}
-DAC960_V2_CommandTimeout_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDevice
-{
- unsigned char LogicalUnit; /* Byte 0 */
- unsigned char TargetID; /* Byte 1 */
- unsigned char Channel:3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device structure.
-*/
-
-typedef struct DAC960_V2_LogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned char :3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Operation Device type.
-*/
-
-typedef enum
-{
- DAC960_V2_Physical_Device = 0x00,
- DAC960_V2_RAID_Device = 0x01,
- DAC960_V2_Physical_Channel = 0x02,
- DAC960_V2_RAID_Channel = 0x03,
- DAC960_V2_Physical_Controller = 0x04,
- DAC960_V2_RAID_Controller = 0x05,
- DAC960_V2_Configuration_Group = 0x10,
- DAC960_V2_Enclosure = 0x11
-}
-__attribute__ ((packed))
-DAC960_V2_OperationDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Translate Physical To Logical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalToLogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned short :16; /* Bytes 2-3 */
- unsigned char PreviousBootController; /* Byte 4 */
- unsigned char PreviousBootChannel; /* Byte 5 */
- unsigned char PreviousBootTargetID; /* Byte 6 */
- unsigned char PreviousBootLogicalUnit; /* Byte 7 */
-}
-DAC960_V2_PhysicalToLogicalDevice_T;
-
-
-
-/*
- Define the DAC960 V2 Firmware Scatter/Gather List Entry structure.
-*/
-
-typedef struct DAC960_V2_ScatterGatherSegment
-{
- DAC960_BusAddress64_T SegmentDataPointer; /* Bytes 0-7 */
- DAC960_ByteCount64_T SegmentByteCount; /* Bytes 8-15 */
-}
-DAC960_V2_ScatterGatherSegment_T;
-
-
-/*
- Define the DAC960 V2 Firmware Data Transfer Memory Address structure.
-*/
-
-typedef union DAC960_V2_DataTransferMemoryAddress
-{
- DAC960_V2_ScatterGatherSegment_T ScatterGatherSegments[2]; /* Bytes 0-31 */
- struct {
- unsigned short ScatterGatherList0Length; /* Bytes 0-1 */
- unsigned short ScatterGatherList1Length; /* Bytes 2-3 */
- unsigned short ScatterGatherList2Length; /* Bytes 4-5 */
- unsigned short :16; /* Bytes 6-7 */
- DAC960_BusAddress64_T ScatterGatherList0Address; /* Bytes 8-15 */
- DAC960_BusAddress64_T ScatterGatherList1Address; /* Bytes 16-23 */
- DAC960_BusAddress64_T ScatterGatherList2Address; /* Bytes 24-31 */
- } ExtendedScatterGather;
-}
-DAC960_V2_DataTransferMemoryAddress_T;
-
-
-/*
- Define the 64 Byte DAC960 V2 Firmware Command Mailbox structure.
-*/
-
-typedef union DAC960_V2_CommandMailbox
-{
- unsigned int Words[16]; /* Words 0-15 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } Common;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned char SCSI_CDB[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_10;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned short :16; /* Bytes 22-23 */
- DAC960_BusAddress64_T SCSI_CDB_BusAddress; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_255;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short :16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ControllerInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } LogicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } PhysicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short EventSequenceNumberHigh16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned short EventSequenceNumberLow16; /* Bytes 22-23 */
- unsigned char Reserved[8]; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } GetEvent;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- union {
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState;
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState;
- } DeviceState; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SetDeviceState;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- bool RestoreConsistency:1; /* Byte 22 Bit 0 */
- bool InitializedAreaOnly:1; /* Byte 22 Bit 1 */
- unsigned char :6; /* Byte 22 Bits 2-7 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ConsistencyCheck;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- unsigned char FirstCommandMailboxSizeKB; /* Byte 4 */
- unsigned char FirstStatusMailboxSizeKB; /* Byte 5 */
- unsigned char SecondCommandMailboxSizeKB; /* Byte 6 */
- unsigned char SecondStatusMailboxSizeKB; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char HealthStatusBufferSizeKB; /* Byte 22 */
- unsigned char :8; /* Byte 23 */
- DAC960_BusAddress64_T HealthStatusBufferBusAddress; /* Bytes 24-31 */
- DAC960_BusAddress64_T FirstCommandMailboxBusAddress; /* Bytes 32-39 */
- DAC960_BusAddress64_T FirstStatusMailboxBusAddress; /* Bytes 40-47 */
- DAC960_BusAddress64_T SecondCommandMailboxBusAddress; /* Bytes 48-55 */
- DAC960_BusAddress64_T SecondStatusMailboxBusAddress; /* Bytes 56-63 */
- } SetMemoryMailbox;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- DAC960_V2_OperationDevice_T OperationDevice; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } DeviceOperation;
-}
-DAC960_V2_CommandMailbox_T;
-
-
-/*
- Define the DAC960 Driver IOCTL requests.
-*/
-
-#define DAC960_IOCTL_GET_CONTROLLER_COUNT 0xDAC001
-#define DAC960_IOCTL_GET_CONTROLLER_INFO 0xDAC002
-#define DAC960_IOCTL_V1_EXECUTE_COMMAND 0xDAC003
-#define DAC960_IOCTL_V2_EXECUTE_COMMAND 0xDAC004
-#define DAC960_IOCTL_V2_GET_HEALTH_STATUS 0xDAC005
-
-
-/*
- Define the DAC960_IOCTL_GET_CONTROLLER_INFO reply structure.
-*/
-
-typedef struct DAC960_ControllerInfo
-{
- unsigned char ControllerNumber;
- unsigned char FirmwareType;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char PCI_Bus;
- unsigned char PCI_Device;
- unsigned char PCI_Function;
- unsigned char IRQ_Channel;
- DAC960_PCI_Address_T PCI_Address;
- unsigned char ModelName[20];
- unsigned char FirmwareVersion[12];
-}
-DAC960_ControllerInfo_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void __user *DataTransferBuffer;
- DAC960_V1_DCDB_T __user *DCDB;
-}
-DAC960_V1_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void *DataTransferBuffer;
- DAC960_V1_DCDB_T *DCDB;
- DAC960_V1_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V1_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V1_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void __user *DataTransferBuffer;
- void __user *RequestSenseBuffer;
-}
-DAC960_V2_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void *DataTransferBuffer;
- void *RequestSenseBuffer;
- DAC960_V2_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V2_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V2_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_GET_HEALTH_STATUS request structure.
-*/
-
-typedef struct DAC960_V2_GetHealthStatus
-{
- unsigned char ControllerNumber;
- DAC960_V2_HealthStatusBuffer_T __user *HealthStatusBuffer;
-}
-DAC960_V2_GetHealthStatus_T;
-
-
-/*
- Import the Kernel Mode IOCTL interface.
-*/
-
-extern int DAC960_KernelIOCTL(unsigned int Request, void *Argument);
-
-
-/*
- DAC960_DriverVersion protects the private portion of this file.
-*/
-
-#ifdef DAC960_DriverVersion
-
-
-/*
- Define the maximum Driver Queue Depth and Controller Queue Depth supported
- by DAC960 V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxDriverQueueDepth 511
-#define DAC960_MaxControllerQueueDepth 512
-
-
-/*
- Define the maximum number of Scatter/Gather Segments supported for any
- DAC960 V1 and V2 Firmware controller.
-*/
-
-#define DAC960_V1_ScatterGatherLimit 33
-#define DAC960_V2_ScatterGatherLimit 128
-
-
-/*
- Define the number of Command Mailboxes and Status Mailboxes used by the
- DAC960 V1 and V2 Firmware Memory Mailbox Interface.
-*/
-
-#define DAC960_V1_CommandMailboxCount 256
-#define DAC960_V1_StatusMailboxCount 1024
-#define DAC960_V2_CommandMailboxCount 512
-#define DAC960_V2_StatusMailboxCount 512
-
-
-/*
- Define the DAC960 Controller Monitoring Timer Interval.
-*/
-
-#define DAC960_MonitoringTimerInterval (10 * HZ)
-
-
-/*
- Define the DAC960 Controller Secondary Monitoring Interval.
-*/
-
-#define DAC960_SecondaryMonitoringInterval (60 * HZ)
-
-
-/*
- Define the DAC960 Controller Health Status Monitoring Interval.
-*/
-
-#define DAC960_HealthStatusMonitoringInterval (1 * HZ)
-
-
-/*
- Define the DAC960 Controller Progress Reporting Interval.
-*/
-
-#define DAC960_ProgressReportingInterval (60 * HZ)
-
-
-/*
- Define the maximum number of Partitions allowed for each Logical Drive.
-*/
-
-#define DAC960_MaxPartitions 8
-#define DAC960_MaxPartitionsBits 3
-
-/*
- Define the DAC960 Controller fixed Block Size and Block Size Bits.
-*/
-
-#define DAC960_BlockSize 512
-#define DAC960_BlockSizeBits 9
-
-
-/*
- Define the number of Command structures that should be allocated as a
- group to optimize kernel memory allocation.
-*/
-
-#define DAC960_V1_CommandAllocationGroupSize 11
-#define DAC960_V2_CommandAllocationGroupSize 29
-
-
-/*
- Define the Controller Line Buffer, Progress Buffer, User Message, and
- Initial Status Buffer sizes.
-*/
-
-#define DAC960_LineBufferSize 100
-#define DAC960_ProgressBufferSize 200
-#define DAC960_UserMessageSize 200
-#define DAC960_InitialStatusBufferSize (8192-32)
-
-
-/*
- Define the DAC960 Controller Firmware Types.
-*/
-
-typedef enum
-{
- DAC960_V1_Controller = 1,
- DAC960_V2_Controller = 2
-}
-DAC960_FirmwareType_T;
-
-
-/*
- Define the DAC960 Controller Hardware Types.
-*/
-
-typedef enum
-{
- DAC960_BA_Controller = 1, /* eXtremeRAID 2000 */
- DAC960_LP_Controller = 2, /* AcceleRAID 352 */
- DAC960_LA_Controller = 3, /* DAC1164P */
- DAC960_PG_Controller = 4, /* DAC960PTL/PJ/PG */
- DAC960_PD_Controller = 5, /* DAC960PU/PD/PL/P */
- DAC960_P_Controller = 6, /* DAC960PU/PD/PL/P */
- DAC960_GEM_Controller = 7, /* AcceleRAID 4/5/600 */
-}
-DAC960_HardwareType_T;
-
-
-/*
- Define the Driver Message Levels.
-*/
-
-typedef enum DAC960_MessageLevel
-{
- DAC960_AnnounceLevel = 0,
- DAC960_InfoLevel = 1,
- DAC960_NoticeLevel = 2,
- DAC960_WarningLevel = 3,
- DAC960_ErrorLevel = 4,
- DAC960_ProgressLevel = 5,
- DAC960_CriticalLevel = 6,
- DAC960_UserCriticalLevel = 7
-}
-DAC960_MessageLevel_T;
-
-static char
- *DAC960_MessageLevelMap[] =
- { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING,
- KERN_ERR, KERN_CRIT, KERN_CRIT, KERN_CRIT };
-
-
-/*
- Define Driver Message macros.
-*/
-
-#define DAC960_Announce(Format, Arguments...) \
- DAC960_Message(DAC960_AnnounceLevel, Format, ##Arguments)
-
-#define DAC960_Info(Format, Arguments...) \
- DAC960_Message(DAC960_InfoLevel, Format, ##Arguments)
-
-#define DAC960_Notice(Format, Arguments...) \
- DAC960_Message(DAC960_NoticeLevel, Format, ##Arguments)
-
-#define DAC960_Warning(Format, Arguments...) \
- DAC960_Message(DAC960_WarningLevel, Format, ##Arguments)
-
-#define DAC960_Error(Format, Arguments...) \
- DAC960_Message(DAC960_ErrorLevel, Format, ##Arguments)
-
-#define DAC960_Progress(Format, Arguments...) \
- DAC960_Message(DAC960_ProgressLevel, Format, ##Arguments)
-
-#define DAC960_Critical(Format, Arguments...) \
- DAC960_Message(DAC960_CriticalLevel, Format, ##Arguments)
-
-#define DAC960_UserCritical(Format, Arguments...) \
- DAC960_Message(DAC960_UserCriticalLevel, Format, ##Arguments)
-
-
-struct DAC960_privdata {
- DAC960_HardwareType_T HardwareType;
- DAC960_FirmwareType_T FirmwareType;
- irq_handler_t InterruptHandler;
- unsigned int MemoryWindowSize;
-};
-
-
-/*
- Define the DAC960 V1 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V1_StatusMailbox
-{
- unsigned int Word; /* Word 0 */
- struct {
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 0 */
- unsigned char :7; /* Byte 1 Bits 0-6 */
- bool Valid:1; /* Byte 1 Bit 7 */
- DAC960_V1_CommandStatus_T CommandStatus; /* Bytes 2-3 */
- } Fields;
-}
-DAC960_V1_StatusMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V2_StatusMailbox
-{
- unsigned int Words[2]; /* Words 0-1 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandStatus_T CommandStatus; /* Byte 2 */
- unsigned char RequestSenseLength; /* Byte 3 */
- int DataTransferResidue; /* Bytes 4-7 */
- } Fields;
-}
-DAC960_V2_StatusMailbox_T;
-
-
-/*
- Define the DAC960 Driver Command Types.
-*/
-
-typedef enum
-{
- DAC960_ReadCommand = 1,
- DAC960_WriteCommand = 2,
- DAC960_ReadRetryCommand = 3,
- DAC960_WriteRetryCommand = 4,
- DAC960_MonitoringCommand = 5,
- DAC960_ImmediateCommand = 6,
- DAC960_QueuedCommand = 7
-}
-DAC960_CommandType_T;
-
-
-/*
- Define the DAC960 Driver Command structure.
-*/
-
-typedef struct DAC960_Command
-{
- int CommandIdentifier;
- DAC960_CommandType_T CommandType;
- struct DAC960_Controller *Controller;
- struct DAC960_Command *Next;
- struct completion *Completion;
- unsigned int LogicalDriveNumber;
- unsigned int BlockNumber;
- unsigned int BlockCount;
- unsigned int SegmentCount;
- int DmaDirection;
- struct scatterlist *cmd_sglist;
- struct request *Request;
- union {
- struct {
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_KernelCommand_T *KernelCommand;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- struct scatterlist ScatterList[DAC960_V1_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V1;
- struct {
- DAC960_V2_CommandMailbox_T CommandMailbox;
- DAC960_V2_KernelCommand_T *KernelCommand;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned char RequestSenseLength;
- int DataTransferResidue;
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- DAC960_SCSI_RequestSense_T *RequestSense;
- dma_addr_t RequestSenseDMA;
- struct scatterlist ScatterList[DAC960_V2_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V2;
- } FW;
-}
-DAC960_Command_T;
-
-
-/*
- Define the DAC960 Driver Controller structure.
-*/
-
-typedef struct DAC960_Controller
-{
- void __iomem *BaseAddress;
- void __iomem *MemoryMappedAddress;
- DAC960_FirmwareType_T FirmwareType;
- DAC960_HardwareType_T HardwareType;
- DAC960_IO_Address_T IO_Address;
- DAC960_PCI_Address_T PCI_Address;
- struct pci_dev *PCIDevice;
- unsigned char ControllerNumber;
- unsigned char ControllerName[4];
- unsigned char ModelName[20];
- unsigned char FullModelName[28];
- unsigned char FirmwareVersion[12];
- unsigned char Bus;
- unsigned char Device;
- unsigned char Function;
- unsigned char IRQ_Channel;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char MemorySize;
- unsigned char LogicalDriveCount;
- unsigned short CommandAllocationGroupSize;
- unsigned short ControllerQueueDepth;
- unsigned short DriverQueueDepth;
- unsigned short MaxBlocksPerCommand;
- unsigned short ControllerScatterGatherLimit;
- unsigned short DriverScatterGatherLimit;
- unsigned int CombinedStatusBufferLength;
- unsigned int InitialStatusLength;
- unsigned int CurrentStatusLength;
- unsigned int ProgressBufferLength;
- unsigned int UserStatusLength;
- struct dma_loaf DmaPages;
- unsigned long MonitoringTimerCount;
- unsigned long PrimaryMonitoringTime;
- unsigned long SecondaryMonitoringTime;
- unsigned long ShutdownMonitoringTimer;
- unsigned long LastProgressReportTime;
- unsigned long LastCurrentStatusTime;
- bool ControllerInitialized;
- bool MonitoringCommandDeferred;
- bool EphemeralProgressMessage;
- bool DriveSpinUpMessageDisplayed;
- bool MonitoringAlertMode;
- bool SuppressEnclosureMessages;
- struct timer_list MonitoringTimer;
- struct gendisk *disks[DAC960_MaxLogicalDrives];
- struct dma_pool *ScatterGatherPool;
- DAC960_Command_T *FreeCommands;
- unsigned char *CombinedStatusBuffer;
- unsigned char *CurrentStatusBuffer;
- struct request_queue *RequestQueue[DAC960_MaxLogicalDrives];
- int req_q_index;
- spinlock_t queue_lock;
- wait_queue_head_t CommandWaitQueue;
- wait_queue_head_t HealthStatusWaitQueue;
- DAC960_Command_T InitialCommand;
- DAC960_Command_T *Commands[DAC960_MaxDriverQueueDepth];
- struct proc_dir_entry *ControllerProcEntry;
- bool LogicalDriveInitiallyAccessible[DAC960_MaxLogicalDrives];
- void (*QueueCommand)(DAC960_Command_T *Command);
- bool (*ReadControllerConfiguration)(struct DAC960_Controller *);
- bool (*ReadDeviceConfiguration)(struct DAC960_Controller *);
- bool (*ReportDeviceConfiguration)(struct DAC960_Controller *);
- void (*QueueReadWriteCommand)(DAC960_Command_T *Command);
- union {
- struct {
- unsigned char GeometryTranslationHeads;
- unsigned char GeometryTranslationSectors;
- unsigned char PendingRebuildFlag;
- unsigned short StripeSize;
- unsigned short SegmentSize;
- unsigned short NewEventLogSequenceNumber;
- unsigned short OldEventLogSequenceNumber;
- unsigned short DeviceStateChannel;
- unsigned short DeviceStateTargetID;
- bool DualModeMemoryMailboxInterface;
- bool BackgroundInitializationStatusSupported;
- bool SAFTE_EnclosureManagementEnabled;
- bool NeedLogicalDriveInformation;
- bool NeedErrorTableInformation;
- bool NeedDeviceStateInformation;
- bool NeedDeviceInquiryInformation;
- bool NeedDeviceSerialNumberInformation;
- bool NeedRebuildProgress;
- bool NeedConsistencyCheckProgress;
- bool NeedBackgroundInitializationStatus;
- bool StartDeviceStateScan;
- bool RebuildProgressFirst;
- bool RebuildFlagPending;
- bool RebuildStatusPending;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V1_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V1_CommandMailbox_T *LastCommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V1_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V1_StatusMailbox_T *LastStatusMailbox;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
-
- DAC960_V1_DCDB_T *MonitoringDCDB;
- dma_addr_t MonitoringDCDB_DMA;
-
- DAC960_V1_Enquiry_T Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry;
- dma_addr_t NewEnquiryDMA;
-
- DAC960_V1_ErrorTable_T ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable;
- dma_addr_t NewErrorTableDMA;
-
- DAC960_V1_EventLogEntry_T *EventLogEntry;
- dma_addr_t EventLogEntryDMA;
-
- DAC960_V1_RebuildProgress_T *RebuildProgress;
- dma_addr_t RebuildProgressDMA;
- DAC960_V1_CommandStatus_T LastRebuildStatus;
- DAC960_V1_CommandStatus_T PendingRebuildStatus;
-
- DAC960_V1_LogicalDriveInformationArray_T LogicalDriveInformation;
- DAC960_V1_LogicalDriveInformationArray_T *NewLogicalDriveInformation;
- dma_addr_t NewLogicalDriveInformationDMA;
-
- DAC960_V1_BackgroundInitializationStatus_T
- *BackgroundInitializationStatus;
- dma_addr_t BackgroundInitializationStatusDMA;
- DAC960_V1_BackgroundInitializationStatus_T
- LastBackgroundInitializationStatus;
-
- DAC960_V1_DeviceState_T
- DeviceState[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_V1_DeviceState_T *NewDeviceState;
- dma_addr_t NewDeviceStateDMA;
-
- DAC960_SCSI_Inquiry_T
- InquiryStandardData[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData;
- dma_addr_t NewInquiryStandardDataDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- InquiryUnitSerialNumber[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
-
- int DeviceResetCount[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- bool DirectCommandActive[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- } V1;
- struct {
- unsigned int StatusChangeCounter;
- unsigned int NextEventSequenceNumber;
- unsigned int PhysicalDeviceIndex;
- bool NeedLogicalDeviceInformation;
- bool NeedPhysicalDeviceInformation;
- bool NeedDeviceSerialNumberInformation;
- bool StartLogicalDeviceInformationScan;
- bool StartPhysicalDeviceInformationScan;
- struct dma_pool *RequestSensePool;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V2_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V2_CommandMailbox_T *LastCommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V2_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V2_StatusMailbox_T *LastStatusMailbox;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
-
- dma_addr_t HealthStatusBufferDMA;
- DAC960_V2_HealthStatusBuffer_T *HealthStatusBuffer;
-
- DAC960_V2_ControllerInfo_T ControllerInformation;
- DAC960_V2_ControllerInfo_T *NewControllerInformation;
- dma_addr_t NewControllerInformationDMA;
-
- DAC960_V2_LogicalDeviceInfo_T
- *LogicalDeviceInformation[DAC960_MaxLogicalDrives];
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInformation;
- dma_addr_t NewLogicalDeviceInformationDMA;
-
- DAC960_V2_PhysicalDeviceInfo_T
- *PhysicalDeviceInformation[DAC960_V2_MaxPhysicalDevices];
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInformation;
- dma_addr_t NewPhysicalDeviceInformationDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber[DAC960_V2_MaxPhysicalDevices];
-
- DAC960_V2_Event_T *Event;
- dma_addr_t EventDMA;
-
- DAC960_V2_PhysicalToLogicalDevice_T *PhysicalToLogicalDevice;
- dma_addr_t PhysicalToLogicalDeviceDMA;
-
- DAC960_V2_PhysicalDevice_T
- LogicalDriveToVirtualDevice[DAC960_MaxLogicalDrives];
- bool LogicalDriveFoundDuringScan[DAC960_MaxLogicalDrives];
- } V2;
- } FW;
- unsigned char ProgressBuffer[DAC960_ProgressBufferSize];
- unsigned char UserStatusBuffer[DAC960_UserMessageSize];
-}
-DAC960_Controller_T;
-
-
-/*
- Simplify access to Firmware Version Dependent Data Structure Components
- and Functions.
-*/
-
-#define V1 FW.V1
-#define V2 FW.V2
-#define DAC960_QueueCommand(Command) \
- (Controller->QueueCommand)(Command)
-#define DAC960_ReadControllerConfiguration(Controller) \
- (Controller->ReadControllerConfiguration)(Controller)
-#define DAC960_ReadDeviceConfiguration(Controller) \
- (Controller->ReadDeviceConfiguration)(Controller)
-#define DAC960_ReportDeviceConfiguration(Controller) \
- (Controller->ReportDeviceConfiguration)(Controller)
-#define DAC960_QueueReadWriteCommand(Command) \
- (Controller->QueueReadWriteCommand)(Command)
-
-/*
- * dma_addr_writeql is provided to write dma_addr_t types
- * to a 64-bit pci address space register. The controller
- * will accept having the register written as two 32-bit
- * values.
- *
- * In HIGHMEM kernels, dma_addr_t is a 64-bit value.
- * without HIGHMEM, dma_addr_t is a 32-bit value.
- *
- * The compiler should always fix up the assignment
- * to u.wq appropriately, depending upon the size of
- * dma_addr_t.
- */
-static inline
-void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address)
-{
- union {
- u64 wq;
- uint wl[2];
- } u;
-
- u.wq = addr;
-
- writel(u.wl[0], write_address);
- writel(u.wl[1], write_address + 4);
-}
-
-/*
- Define the DAC960 GEM Series Controller Interface Register Offsets.
- */
-
-#define DAC960_GEM_RegisterWindowSize 0x600
-
-typedef enum
-{
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset = 0x214,
- DAC960_GEM_InboundDoorBellRegisterClearOffset = 0x218,
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset = 0x224,
- DAC960_GEM_OutboundDoorBellRegisterClearOffset = 0x228,
- DAC960_GEM_InterruptStatusRegisterOffset = 0x208,
- DAC960_GEM_InterruptMaskRegisterReadSetOffset = 0x22C,
- DAC960_GEM_InterruptMaskRegisterClearOffset = 0x230,
- DAC960_GEM_CommandMailboxBusAddressOffset = 0x510,
- DAC960_GEM_CommandStatusOffset = 0x518,
- DAC960_GEM_ErrorStatusRegisterReadSetOffset = 0x224,
- DAC960_GEM_ErrorStatusRegisterClearOffset = 0x228,
-}
-DAC960_GEM_RegisterOffsets_T;
-
-/*
- Define the structure of the DAC960 GEM Series Inbound Door Bell
- */
-
-typedef union DAC960_GEM_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool HardwareMailboxNewCommand:1;
- bool AcknowledgeHardwareMailboxStatus:1;
- bool GenerateInterrupt:1;
- bool ControllerReset:1;
- bool MemoryMailboxNewCommand:1;
- unsigned int :3;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxFull:1;
- bool InitializationInProgress:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_InboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Outbound Door Bell Register.
- */
-typedef union DAC960_GEM_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool AcknowledgeHardwareMailboxInterrupt:1;
- bool AcknowledgeMemoryMailboxInterrupt:1;
- unsigned int :6;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxStatusAvailable:1;
- bool MemoryMailboxStatusAvailable:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_OutboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Interrupt Mask Register.
- */
-typedef union DAC960_GEM_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int :16;
- unsigned int :8;
- unsigned int HardwareMailboxInterrupt:1;
- unsigned int MemoryMailboxInterrupt:1;
- unsigned int :6;
- } Bits;
-}
-DAC960_GEM_InterruptMaskRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Error Status Register.
- */
-
-typedef union DAC960_GEM_ErrorStatusRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- unsigned int :5;
- bool ErrorStatusPending:1;
- unsigned int :2;
- } Bits;
-}
-DAC960_GEM_ErrorStatusRegister_T;
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 GEM Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_GEM_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_GEM_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_GEM_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_GEM_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InterruptMaskRegisterReadSetOffset);
- return !(InterruptMaskRegister.Bits.HardwareMailboxInterrupt ||
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt);
-}
-
-static inline
-void DAC960_GEM_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_GEM_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_GEM_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_GEM_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_GEM_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_GEM_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_GEM_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readl(ControllerBaseAddress + DAC960_GEM_ErrorStatusRegisterReadSetOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 1);
- writel(0x03000000, ControllerBaseAddress +
- DAC960_GEM_ErrorStatusRegisterClearOffset);
- return true;
-}
-
-/*
- Define the DAC960 BA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_BA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_BA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_BA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_BA_InterruptStatusRegisterOffset = 0x30,
- DAC960_BA_InterruptMaskRegisterOffset = 0x34,
- DAC960_BA_CommandMailboxBusAddressOffset = 0x50,
- DAC960_BA_CommandStatusOffset = 0x58,
- DAC960_BA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_BA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_BA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- bool DisableInterruptsI2O:1; /* Bit 3 */
- unsigned int :4; /* Bits 4-7 */
- } Bits;
-}
-DAC960_BA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Error Status Register.
-*/
-
-typedef union DAC960_BA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_BA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 BA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_BA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_BA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_BA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_BA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_BA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_BA_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-
-static inline
-void DAC960_BA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_BA_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_BA_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_BA_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_BA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_BA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LP Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LP_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LP_InboundDoorBellRegisterOffset = 0x20,
- DAC960_LP_OutboundDoorBellRegisterOffset = 0x2C,
- DAC960_LP_InterruptStatusRegisterOffset = 0x30,
- DAC960_LP_InterruptMaskRegisterOffset = 0x34,
- DAC960_LP_CommandMailboxBusAddressOffset = 0x10,
- DAC960_LP_CommandStatusOffset = 0x18,
- DAC960_LP_ErrorStatusRegisterOffset = 0x2E
-}
-DAC960_LP_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LP_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Error Status Register.
-*/
-
-typedef union DAC960_LP_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LP Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LP_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_LP_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LP_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LP_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LP_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LP_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LP_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_LP_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_LP_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_LP_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_LP_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LP_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_LA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_LA_InterruptMaskRegisterOffset = 0x34,
- DAC960_LA_CommandOpcodeRegisterOffset = 0x50,
- DAC960_LA_CommandIdentifierRegisterOffset = 0x51,
- DAC960_LA_MailboxRegister2Offset = 0x52,
- DAC960_LA_MailboxRegister3Offset = 0x53,
- DAC960_LA_MailboxRegister4Offset = 0x54,
- DAC960_LA_MailboxRegister5Offset = 0x55,
- DAC960_LA_MailboxRegister6Offset = 0x56,
- DAC960_LA_MailboxRegister7Offset = 0x57,
- DAC960_LA_MailboxRegister8Offset = 0x58,
- DAC960_LA_MailboxRegister9Offset = 0x59,
- DAC960_LA_MailboxRegister10Offset = 0x5A,
- DAC960_LA_MailboxRegister11Offset = 0x5B,
- DAC960_LA_MailboxRegister12Offset = 0x5C,
- DAC960_LA_StatusCommandIdentifierRegOffset = 0x5D,
- DAC960_LA_StatusRegisterOffset = 0x5E,
- DAC960_LA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_LA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned char :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned char :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Error Status Register.
-*/
-
-typedef union DAC960_LA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_LA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LA_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_LA_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_LA_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_LA_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_LA_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_LA_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_LA_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LA_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_LA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LA_CommandIdentifierRegisterOffset);
- writeb(0xFF, ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PG Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PG_RegisterWindowSize 0x2000
-
-typedef enum
-{
- DAC960_PG_InboundDoorBellRegisterOffset = 0x0020,
- DAC960_PG_OutboundDoorBellRegisterOffset = 0x002C,
- DAC960_PG_InterruptMaskRegisterOffset = 0x0034,
- DAC960_PG_CommandOpcodeRegisterOffset = 0x1000,
- DAC960_PG_CommandIdentifierRegisterOffset = 0x1001,
- DAC960_PG_MailboxRegister2Offset = 0x1002,
- DAC960_PG_MailboxRegister3Offset = 0x1003,
- DAC960_PG_MailboxRegister4Offset = 0x1004,
- DAC960_PG_MailboxRegister5Offset = 0x1005,
- DAC960_PG_MailboxRegister6Offset = 0x1006,
- DAC960_PG_MailboxRegister7Offset = 0x1007,
- DAC960_PG_MailboxRegister8Offset = 0x1008,
- DAC960_PG_MailboxRegister9Offset = 0x1009,
- DAC960_PG_MailboxRegister10Offset = 0x100A,
- DAC960_PG_MailboxRegister11Offset = 0x100B,
- DAC960_PG_MailboxRegister12Offset = 0x100C,
- DAC960_PG_StatusCommandIdentifierRegOffset = 0x1018,
- DAC960_PG_StatusRegisterOffset = 0x101A,
- DAC960_PG_ErrorStatusRegisterOffset = 0x103F
-}
-DAC960_PG_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned int :27; /* Bits 5-31 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_PG_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int MessageUnitInterruptMask1:2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int MessageUnitInterruptMask2:5; /* Bits 3-7 */
- unsigned int Reserved0:24; /* Bits 8-31 */
- } Bits;
-}
-DAC960_PG_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Error Status Register.
-*/
-
-typedef union DAC960_PG_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PG_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PG Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PG_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_PG_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_PG_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_PG_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_PG_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_PG_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_PG_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PG_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PG_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PG_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PG_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PG_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PG_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PG_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PG_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PG_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PG_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PD Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PD_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_PD_CommandOpcodeRegisterOffset = 0x00,
- DAC960_PD_CommandIdentifierRegisterOffset = 0x01,
- DAC960_PD_MailboxRegister2Offset = 0x02,
- DAC960_PD_MailboxRegister3Offset = 0x03,
- DAC960_PD_MailboxRegister4Offset = 0x04,
- DAC960_PD_MailboxRegister5Offset = 0x05,
- DAC960_PD_MailboxRegister6Offset = 0x06,
- DAC960_PD_MailboxRegister7Offset = 0x07,
- DAC960_PD_MailboxRegister8Offset = 0x08,
- DAC960_PD_MailboxRegister9Offset = 0x09,
- DAC960_PD_MailboxRegister10Offset = 0x0A,
- DAC960_PD_MailboxRegister11Offset = 0x0B,
- DAC960_PD_MailboxRegister12Offset = 0x0C,
- DAC960_PD_StatusCommandIdentifierRegOffset = 0x0D,
- DAC960_PD_StatusRegisterOffset = 0x0E,
- DAC960_PD_ErrorStatusRegisterOffset = 0x3F,
- DAC960_PD_InboundDoorBellRegisterOffset = 0x40,
- DAC960_PD_OutboundDoorBellRegisterOffset = 0x41,
- DAC960_PD_InterruptEnableRegisterOffset = 0x43
-}
-DAC960_PD_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool NewCommand:1; /* Bit 0 */
- bool AcknowledgeStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- unsigned char :4; /* Bits 4-7 */
- } Write;
- struct {
- bool MailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_PD_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeInterrupt:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Write;
- struct {
- bool StatusAvailable:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Read;
-}
-DAC960_PD_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Interrupt Enable Register.
-*/
-
-typedef union DAC960_PD_InterruptEnableRegister
-{
- unsigned char All;
- struct {
- bool EnableInterrupts:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Bits;
-}
-DAC960_PD_InterruptEnableRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Error Status Register.
-*/
-
-typedef union DAC960_PD_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PD_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PD Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PD_NewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.NewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_AcknowledgeStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_MailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.MailboxFull;
-}
-
-static inline
-bool DAC960_PD_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PD_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_StatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.StatusAvailable;
-}
-
-static inline
-void DAC960_PD_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = true;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-void DAC960_PD_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = false;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
- return InterruptEnableRegister.Bits.EnableInterrupts;
-}
-
-static inline
-void DAC960_PD_WriteCommandMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PD_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PD_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PD_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PD_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PD_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PD_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PD_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PD_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PD_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PD_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- return true;
-}
-
-static inline void DAC960_P_To_PD_TranslateEnquiry(void *Enquiry)
-{
- memcpy(Enquiry + 132, Enquiry + 36, 64);
- memset(Enquiry + 36, 0, 96);
-}
-
-static inline void DAC960_P_To_PD_TranslateDeviceState(void *DeviceState)
-{
- memcpy(DeviceState + 2, DeviceState + 3, 1);
- memmove(DeviceState + 4, DeviceState + 5, 2);
- memmove(DeviceState + 6, DeviceState + 8, 4);
-}
-
-static inline
-void DAC960_PD_To_P_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Type5.LD.LogicalDriveNumber;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= CommandMailbox->Bytes[7] << 6;
- CommandMailbox->Bytes[7] = LogicalDriveNumber;
-}
-
-static inline
-void DAC960_P_To_PD_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Bytes[7];
- CommandMailbox->Bytes[7] = CommandMailbox->Bytes[3] >> 6;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= LogicalDriveNumber << 3;
-}
-
-
-/*
- Define prototypes for the forward referenced DAC960 Driver Internal Functions.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *);
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_RequestFunction(struct request_queue *);
-static irqreturn_t DAC960_BA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LP_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PG_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PD_InterruptHandler(int, void *);
-static irqreturn_t DAC960_P_InterruptHandler(int, void *);
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_MonitoringTimerFunction(struct timer_list *);
-static void DAC960_Message(DAC960_MessageLevel_T, unsigned char *,
- DAC960_Controller_T *, ...);
-static void DAC960_CreateProcEntries(DAC960_Controller_T *);
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *);
-
-#endif /* DAC960_DriverVersion */
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index d4913516823f..c1747f2953bc 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -121,18 +121,6 @@ source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
-config BLK_DEV_DAC960
- tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
- depends on PCI
- help
- This driver adds support for the Mylex DAC960, AcceleRAID, and
- eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/blockdev/README.DAC960> for further information
- about this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called DAC960.
-
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 8566b188368b..a53cc1e3a2d3 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
--
2.16.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/3] drivers/block: Remove DAC960 driver
2018-10-09 15:26 [PATCHv4 0/3] Deprecate " Hannes Reinecke
@ 2018-10-09 15:27 ` Hannes Reinecke
0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2018-10-09 15:27 UTC (permalink / raw)
To: Jens Axboe
Cc: Martin K. Petersen, James Bottomley, Christoph Hellwig,
linux-block, linux-scsi, Hannes Reinecke, Hannes Reinecke
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
Documentation/blockdev/README.DAC960 | 756 ----
drivers/block/DAC960.c | 7229 ----------------------------------
drivers/block/DAC960.h | 4414 ---------------------
drivers/block/Kconfig | 12 -
drivers/block/Makefile | 1 -
5 files changed, 12412 deletions(-)
delete mode 100644 Documentation/blockdev/README.DAC960
delete mode 100644 drivers/block/DAC960.c
delete mode 100644 drivers/block/DAC960.h
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
deleted file mode 100644
index bd85fb9dc6e5..000000000000
--- a/Documentation/blockdev/README.DAC960
+++ /dev/null
@@ -1,756 +0,0 @@
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Version 2.2.11 for Linux 2.2.19
- Version 2.4.11 for Linux 2.4.12
-
- PRODUCTION RELEASE
-
- 11 October 2001
-
- Leonard N. Zubkoff
- Dandelion Digital
- lnz@dandelion.com
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
- INTRODUCTION
-
-Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
-controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
-California 94555, USA and can be reached at 510.796.6100 or on the World Wide
-Web at http://www.mylex.com. Mylex Technical Support can be reached by
-electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
-510.745.7715. Contact information for offices in Europe and Japan is available
-on their Web site.
-
-The latest information on Linux support for DAC960 PCI RAID Controllers, as
-well as the most recent release of this driver, will always be available from
-my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
-driver supports all current Mylex PCI RAID controllers including the new
-eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
-new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
-and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
-minimum firmware version requirements. For simplicity, in most places this
-documentation refers to DAC960 generically rather than explicitly listing all
-the supported models.
-
-Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
-Please include with the bug report the complete configuration messages reported
-by the driver at startup, along with any subsequent system messages relevant to
-the controller's operation, and a detailed description of your system's
-hardware configuration. Driver bugs are actually quite rare; if you encounter
-problems with disks being marked offline, for example, please contact Mylex
-Technical Support as the problem is related to the hardware configuration
-rather than the Linux driver.
-
-Please consult the RAID controller documentation for detailed information
-regarding installation and configuration of the controllers. This document
-primarily provides information specific to the Linux support.
-
-
- DRIVER FEATURES
-
-The DAC960 RAID controllers are supported solely as high performance RAID
-controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
-driver operates at the block device level, the same level as the SCSI and IDE
-drivers. Unlike other RAID controllers currently supported on Linux, the
-DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
-complexity and unnecessary code that would be associated with an implementation
-as a SCSI driver. The DAC960 driver is designed for as high a performance as
-possible with no compromises or extra code for compatibility with lower
-performance devices. The DAC960 driver includes extensive error logging and
-online configuration management capabilities. Except for initial configuration
-of the controller and adding new disk drives, most everything can be handled
-from Linux while the system is operational.
-
-The DAC960 driver is architected to support up to 8 controllers per system.
-Each DAC960 parallel SCSI controller can support up to 15 disk drives per
-channel, for a maximum of 60 drives on a four channel controller; the fibre
-channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
-a total of 250 drives. The drives installed on a controller are divided into
-one or more "Drive Groups", and then each Drive Group is subdivided further
-into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
-and caching policy associated with it, and it appears to Linux as a single
-block device. Logical Drives are further subdivided into up to 7 partitions
-through the normal Linux and PC disk partitioning schemes. Logical Drives are
-also known as "System Drives", and Drive Groups are also called "Packs". Both
-terms are in use in the Mylex documentation; I have chosen to standardize on
-the more generic "Logical Drive" and "Drive Group".
-
-DAC960 RAID disk devices are named in the style of the obsolete Device File
-System (DEVFS). The device corresponding to Logical Drive D on Controller C
-is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
-through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
-Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
-disks the device names will not change in the event of a disk drive failure.
-The DAC960 driver is assigned major numbers 48 - 55 with one major number per
-controller. The 8 bits of minor number are divided into 5 bits for the Logical
-Drive and 3 bits for the partition.
-
-
- SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
-
-The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
-PCI RAID Controllers as of the date of this document. It is recommended that
-anyone purchasing a Mylex PCI RAID Controller not in the following table
-contact the author beforehand to verify that it is or will be supported.
-
-eXtremeRAID 3000
- 1 Wide Ultra-2/LVD SCSI channel
- 2 External Fibre FC-AL channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-eXtremeRAID 2000
- 4 Wide Ultra-160 LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 352
- 2 Wide Ultra-160 LVD SCSI channels
- 100MHz Intel i960RN RISC Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 170
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RM RISC Processor
- 16MB/32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 160 (AcceleRAID 170LP)
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RS RISC Processor
- Built in 16M ECC SDRAM Memory
- PCI Low Profile Form Factor - fit for 2U height
-
-eXtremeRAID 1100 (DAC1164P)
- 3 Wide Ultra-2/LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
-
-AcceleRAID 250 (DAC960PTL1)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 200 (DAC960PTL0)
- Uses onboard Symbios SCSI chips on certain motherboards
- Includes no onboard SCSI Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 150 (DAC960PRL)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 33MHz Intel i960RP RISC Processor
- 4MB Parity EDO Memory
-
-DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
- 33MHz Intel i960RP RISC Processor
- 4MB/8MB ECC EDO Memory
-
-DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960P 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
-6.00-01 or above is required.
-
-For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
-
-For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
-required.
-
-For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
-
-For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
-3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
-version 2.73-0-00 or above is required (for single Flash ROM controllers)
-
-Please note that not all SCSI disk drives are suitable for use with DAC960
-controllers, and only particular firmware versions of any given model may
-actually function correctly. Similarly, not all motherboards have a BIOS that
-properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
-DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
-If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
-verify compatibility. Mylex makes available a hard disk compatibility list at
-http://www.mylex.com/support/hdcomp/hd-lists.html.
-
-
- DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
-
-To install the DAC960 RAID driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
- cd /usr/src
- tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
- mv README.DAC960 linux/Documentation
- mv DAC960.[ch] linux/drivers/block
- patch -p0 < DAC960.patch (if DAC960.patch is included)
- cd linux
- make config
- make bzImage (or zImage)
-
-Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
-standard kernel, run lilo if appropriate, and reboot.
-
-To create the necessary devices in /dev, the "make_rd" script included in
-"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
-LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
-are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
-statically linked executables of LILO and FDISK. This modified version of LILO
-will allow booting from a DAC960 controller and/or mounting the root file
-system from a DAC960.
-
-Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
-controllers. Installing directly onto a DAC960 may be problematic from other
-Linux distributions until their installation utilities are updated.
-
-
- INSTALLATION NOTES
-
-Before installing Linux or adding DAC960 logical drives to an existing Linux
-system, the controller must first be configured to provide one or more logical
-drives using the BIOS Configuration Utility or DACCF. Please note that since
-there are only at most 6 usable partitions on each logical drive, systems
-requiring more partitions should subdivide a drive group into multiple logical
-drives, each of which can have up to 6 usable partitions. Also, note that with
-large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
-rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
-will cause the logical drive geometry to have more than 65535 cylinders which
-will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
-can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
-during the BIOS initialization sequence.
-
-For maximum performance and the most efficient E2FSCK performance, it is
-recommended that EXT2 file systems be built with a 4KB block size and 16 block
-stride to match the DAC960 controller's 64KB default stripe size. The command
-"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
-large number of small files on the file systems, it is also beneficial to add
-the "-i 16384" option to increase the bytes per inode parameter thereby
-reducing the file system metadata. Finally, on systems that will only be run
-with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
-with the "-s 1" option.
-
-
- DAC960 ANNOUNCEMENTS MAILING LIST
-
-The DAC960 Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
-"dac960-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
-
-
- CONTROLLER CONFIGURATION AND STATUS MONITORING
-
-The DAC960 RAID controllers running firmware 4.06 or above include a Background
-Initialization facility so that system downtime is minimized both for initial
-installation and subsequent configuration of additional storage. The BIOS
-Configuration Utility (accessible via Alt-R during the BIOS initialization
-sequence) is used to quickly configure the controller, and then the logical
-drives that have been created are available for immediate use even while they
-are still being initialized by the controller. The primary need for online
-configuration and status monitoring is then to avoid system downtime when disk
-drives fail and must be replaced. Mylex's online monitoring and configuration
-utilities are being ported to Linux and will become available at some point in
-the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
-enclosure, the controller is able to rebuild failed drives automatically as
-soon as a drive replacement is made available.
-
-The primary interfaces for controller configuration and status monitoring are
-special files created in the /proc/rd/... hierarchy along with the normal
-system console logging mechanism. Whenever the system is operating, the DAC960
-driver queries each controller for status information every 10 seconds, and
-checks for additional conditions every 60 seconds. The initial status of each
-controller is always available for controller N in /proc/rd/cN/initial_status,
-and the current status as of the last status monitoring query is available in
-/proc/rd/cN/current_status. In addition, status changes are also logged by the
-driver to the system console and will appear in the log files maintained by
-syslog. The progress of asynchronous rebuild or consistency check operations
-is also available in /proc/rd/cN/current_status, and progress messages are
-logged to the system console at most every 60 seconds.
-
-Starting with the 2.2.3/2.0.3 versions of the driver, the status information
-available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
-augmented to include the vendor, model, revision, and serial number (if
-available) for each physical device found connected to the controller:
-
-***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PRL PCI RAID Controller
- Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
- PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- SAF-TE Enclosure Management Enabled
- Physical Devices:
- 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68016775HA
- Disk Status: Online, 17928192 blocks
- 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68004E53HA
- Disk Status: Online, 17928192 blocks
- 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13013935HA
- Disk Status: Online, 17928192 blocks
- 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13016897HA
- Disk Status: Online, 17928192 blocks
- 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68019905HA
- Disk Status: Online, 17928192 blocks
- 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68012753HA
- Disk Status: Online, 17928192 blocks
- 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-To simplify the monitoring process for custom software, the special file
-/proc/rd/status returns "OK" when all DAC960 controllers in the system are
-operating normally and no failures have occurred, or "ALERT" if any logical
-drives are offline or critical or any non-standby physical drives are dead.
-
-Configuration commands for controller N are available via the special file
-/proc/rd/cN/user_command. A human readable command can be written to this
-special file to initiate a configuration operation, and the results of the
-operation can then be read back from the special file in addition to being
-logged to the system console. The shell command sequence
-
- echo "<configuration-command>" > /proc/rd/c0/user_command
- cat /proc/rd/c0/user_command
-
-is typically used to execute configuration commands. The configuration
-commands are:
-
- flush-cache
-
- The "flush-cache" command flushes the controller's cache. The system
- automatically flushes the cache at shutdown or if the driver module is
- unloaded, so this command is only needed to be certain a write back cache
- is flushed to disk before the system is powered off by a command to a UPS.
- Note that the flush-cache command also stops an asynchronous rebuild or
- consistency check, so it should not be used except when the system is being
- halted.
-
- kill <channel>:<target-id>
-
- The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
- This command is provided primarily for testing, and should not be used
- during normal system operation.
-
- make-online <channel>:<target-id>
-
- The "make-online" command changes the physical drive <channel>:<target-id>
- from status DEAD to status ONLINE. In cases where multiple physical drives
- have been killed simultaneously, this command may be used to bring all but
- one of them back online, after which a rebuild to the final drive is
- necessary.
-
- Warning: make-online should only be used on a dead physical drive that is
- an active part of a drive group, never on a standby drive. The command
- should never be used on a dead drive that is part of a critical logical
- drive; rebuild should be used if only a single drive is dead.
-
- make-standby <channel>:<target-id>
-
- The "make-standby" command changes physical drive <channel>:<target-id>
- from status DEAD to status STANDBY. It should only be used in cases where
- a dead drive was replaced after an automatic rebuild was performed onto a
- standby drive. It cannot be used to add a standby drive to the controller
- configuration if one was not created initially; the BIOS Configuration
- Utility must be used for that currently.
-
- rebuild <channel>:<target-id>
-
- The "rebuild" command initiates an asynchronous rebuild onto physical drive
- <channel>:<target-id>. It should only be used when a dead drive has been
- replaced.
-
- check-consistency <logical-drive-number>
-
- The "check-consistency" command initiates an asynchronous consistency check
- of <logical-drive-number> with automatic restoration. It can be used
- whenever it is desired to verify the consistency of the redundancy
- information.
-
- cancel-rebuild
- cancel-consistency-check
-
- The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
- rebuild or consistency check operations previously initiated.
-
-
- EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group without a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:1 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages indicating that Logical
-Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:1 is now DEAD
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-The Sense Keys logged here are just Check Condition / Unit Attention conditions
-arising from a SCSI bus reset that is forced by the controller during its error
-recovery procedures. Concurrently with the above, the driver status available
-from /proc/rd also reflects the drive failure. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Dead, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-Since there are no standby drives configured, the system can continue to access
-the logical drives in a performance degraded mode until the failed drive is
-replaced and a rebuild operation completed to restore the redundancy of the
-logical drives. Once Physical Drive 1:1 is replaced with a properly
-functioning drive, or if the physical drive was killed without having failed
-(e.g., due to electrical problems on the SCSI bus), the user can instruct the
-controller to initiate a rebuild operation onto the newly replaced drive:
-
-gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Rebuild of Physical Drive 1:1 Initiated
-
-The echo command instructs the controller to initiate an asynchronous rebuild
-operation onto Physical Drive 1:1, and the status message that results from the
-operation is then available for reading from /proc/rd/c0/user_command, as well
-as being logged to the console by the driver.
-
-Within 10 seconds of this command the driver logs the initiation of the
-asynchronous rebuild operation:
-
-DAC960#0: Rebuild of Physical Drive 1:1 Initiated
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
-
-and every minute a progress message is logged to the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:1 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-
- EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group with a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Standby, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:2 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages:
-
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:2 is now DEAD
-DAC960#0: Physical Drive 1:2 killed because it was removed
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-Since a standby drive is configured, the controller automatically begins
-rebuilding onto the standby drive:
-
-DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-Concurrently with the above, the driver status available from /proc/rd also
-reflects the drive failure and automatic rebuild. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-
-and every minute a progress message is logged on the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:3 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-Note that the absence of a viable standby drive does not create an "ALERT"
-status. Once dead Physical Drive 1:2 has been replaced, the controller must be
-told that this has occurred and that the newly replaced drive should become the
-new standby drive:
-
-gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Make Standby of Physical Drive 1:2 Succeeded
-
-The echo command instructs the controller to make Physical Drive 1:2 into a
-standby drive, and the status message that results from the operation is then
-available for reading from /proc/rd/c0/user_command, as well as being logged to
-the console by the driver. Within 60 seconds of this command the driver logs:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:2 is now STANDBY
-DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Standby, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
deleted file mode 100644
index 581312ac375f..000000000000
--- a/drivers/block/DAC960.c
+++ /dev/null
@@ -1,7229 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
- Portions Copyright 2002 by Mylex (An IBM Business Unit)
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
-*/
-
-
-#define DAC960_DriverVersion "2.5.49"
-#define DAC960_DriverDate "21 Aug 2007"
-
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/blkdev.h>
-#include <linux/bio.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/genhd.h>
-#include <linux/hdreg.h>
-#include <linux/blkpg.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/random.h>
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include "DAC960.h"
-
-#define DAC960_GAM_MINOR 252
-
-
-static DEFINE_MUTEX(DAC960_mutex);
-static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
-static int DAC960_ControllerCount;
-static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
-
-static long disk_size(DAC960_Controller_T *p, int drive_nr)
-{
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (drive_nr >= p->LogicalDriveCount)
- return 0;
- return p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (i == NULL)
- return 0;
- return i->ConfigurableDeviceSize;
- }
-}
-
-static int DAC960_open(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
- int ret = -ENXIO;
-
- mutex_lock(&DAC960_mutex);
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- goto out;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- goto out;
- }
-
- check_disk_change(bdev);
-
- if (!get_capacity(p->disks[drive_nr]))
- goto out;
- ret = 0;
-out:
- mutex_unlock(&DAC960_mutex);
- return ret;
-}
-
-static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (p->FirmwareType == DAC960_V1_Controller) {
- geo->heads = p->V1.GeometryTranslationHeads;
- geo->sectors = p->V1.GeometryTranslationSectors;
- geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize / (geo->heads * geo->sectors);
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- switch (i->DriveGeometry) {
- case DAC960_V2_Geometry_128_32:
- geo->heads = 128;
- geo->sectors = 32;
- break;
- case DAC960_V2_Geometry_255_63:
- geo->heads = 255;
- geo->sectors = 63;
- break;
- default:
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- p, i->DriveGeometry);
- return -EINVAL;
- }
-
- geo->cylinders = i->ConfigurableDeviceSize /
- (geo->heads * geo->sectors);
- }
-
- return 0;
-}
-
-static unsigned int DAC960_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (!p->LogicalDriveInitiallyAccessible[drive_nr])
- return DISK_EVENT_MEDIA_CHANGE;
- return 0;
-}
-
-static int DAC960_revalidate_disk(struct gendisk *disk)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int unit = (long)disk->private_data;
-
- set_capacity(disk, disk_size(p, unit));
- return 0;
-}
-
-static const struct block_device_operations DAC960_BlockDeviceOperations = {
- .owner = THIS_MODULE,
- .open = DAC960_open,
- .getgeo = DAC960_getgeo,
- .check_events = DAC960_check_events,
- .revalidate_disk = DAC960_revalidate_disk,
-};
-
-
-/*
- DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
- Copyright Notice, and Electronic Mail Address.
-*/
-
-static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
-{
- DAC960_Announce("***** DAC960 RAID Driver Version "
- DAC960_DriverVersion " of "
- DAC960_DriverDate " *****\n", Controller);
- DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
- "<lnz@dandelion.com>\n", Controller);
-}
-
-
-/*
- DAC960_Failure prints a standardized error message, and then returns false.
-*/
-
-static bool DAC960_Failure(DAC960_Controller_T *Controller,
- unsigned char *ErrorMessage)
-{
- DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
- Controller);
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
- return false;
-}
-
-/*
- init_dma_loaf() and slice_dma_loaf() are helper functions for
- aggregating the dma-mapped memory for a well-known collection of
- data structures that are of different lengths.
-
- These routines don't guarantee any alignment. The caller must
- include any space needed for alignment in the sizes of the structures
- that are passed in.
- */
-
-static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
- size_t len)
-{
- void *cpu_addr;
- dma_addr_t dma_handle;
-
- cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
- if (cpu_addr == NULL)
- return false;
-
- loaf->cpu_free = loaf->cpu_base = cpu_addr;
- loaf->dma_free =loaf->dma_base = dma_handle;
- loaf->length = len;
- memset(cpu_addr, 0, len);
- return true;
-}
-
-static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
- dma_addr_t *dma_handle)
-{
- void *cpu_end = loaf->cpu_free + len;
- void *cpu_addr = loaf->cpu_free;
-
- BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
- *dma_handle = loaf->dma_free;
- loaf->cpu_free = cpu_end;
- loaf->dma_free += len;
- return cpu_addr;
-}
-
-static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
-{
- if (loaf_handle->cpu_base != NULL)
- pci_free_consistent(dev, loaf_handle->length,
- loaf_handle->cpu_base, loaf_handle->dma_base);
-}
-
-
-/*
- DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
- data structures for Controller. It returns true on success and false on
- failure.
-*/
-
-static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int CommandAllocationLength, CommandAllocationGroupSize;
- int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
- void *AllocationPointer = NULL;
- void *ScatterGatherCPU = NULL;
- dma_addr_t ScatterGatherDMA;
- struct dma_pool *ScatterGatherPool;
- void *RequestSenseCPU = NULL;
- dma_addr_t RequestSenseDMA;
- struct dma_pool *RequestSensePool = NULL;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
- CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V1_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
- sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- Controller->ScatterGatherPool = ScatterGatherPool;
- }
- else
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
- CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V2_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
- sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- RequestSensePool = dma_pool_create("DAC960_V2_RequestSense",
- &Controller->PCIDevice->dev, sizeof(DAC960_SCSI_RequestSense_T),
- sizeof(int), 0);
- if (RequestSensePool == NULL) {
- dma_pool_destroy(ScatterGatherPool);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- }
- Controller->ScatterGatherPool = ScatterGatherPool;
- Controller->V2.RequestSensePool = RequestSensePool;
- }
- Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
- Controller->FreeCommands = NULL;
- for (CommandIdentifier = 1;
- CommandIdentifier <= Controller->DriverQueueDepth;
- CommandIdentifier++)
- {
- DAC960_Command_T *Command;
- if (--CommandsRemaining <= 0)
- {
- CommandsRemaining =
- Controller->DriverQueueDepth - CommandIdentifier + 1;
- if (CommandsRemaining > CommandAllocationGroupSize)
- CommandsRemaining = CommandAllocationGroupSize;
- CommandGroupByteCount =
- CommandsRemaining * CommandAllocationLength;
- AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
- if (AllocationPointer == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- Command = (DAC960_Command_T *) AllocationPointer;
- AllocationPointer += CommandAllocationLength;
- Command->CommandIdentifier = CommandIdentifier;
- Command->Controller = Controller;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
- Controller->Commands[CommandIdentifier-1] = Command;
- ScatterGatherCPU = dma_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
- &ScatterGatherDMA);
- if (ScatterGatherCPU == NULL)
- return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
-
- if (RequestSensePool != NULL) {
- RequestSenseCPU = dma_pool_alloc(RequestSensePool, GFP_ATOMIC,
- &RequestSenseDMA);
- if (RequestSenseCPU == NULL) {
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU,
- ScatterGatherDMA);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- }
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- Command->cmd_sglist = Command->V1.ScatterList;
- Command->V1.ScatterGatherList =
- (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
- } else {
- Command->cmd_sglist = Command->V2.ScatterList;
- Command->V2.ScatterGatherList =
- (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
- Command->V2.RequestSense =
- (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
- Command->V2.RequestSenseDMA = RequestSenseDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
- }
- }
- return true;
-}
-
-
-/*
- DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
- structures for Controller.
-*/
-
-static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int i;
- struct dma_pool *ScatterGatherPool = Controller->ScatterGatherPool;
- struct dma_pool *RequestSensePool = NULL;
- void *ScatterGatherCPU;
- dma_addr_t ScatterGatherDMA;
- void *RequestSenseCPU;
- dma_addr_t RequestSenseDMA;
- DAC960_Command_T *CommandGroup = NULL;
-
-
- if (Controller->FirmwareType == DAC960_V2_Controller)
- RequestSensePool = Controller->V2.RequestSensePool;
-
- Controller->FreeCommands = NULL;
- for (i = 0; i < Controller->DriverQueueDepth; i++)
- {
- DAC960_Command_T *Command = Controller->Commands[i];
-
- if (Command == NULL)
- continue;
-
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
- ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
- RequestSenseCPU = NULL;
- RequestSenseDMA = (dma_addr_t)0;
- } else {
- ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
- ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
- RequestSenseCPU = (void *)Command->V2.RequestSense;
- RequestSenseDMA = Command->V2.RequestSenseDMA;
- }
- if (ScatterGatherCPU != NULL)
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
- if (RequestSenseCPU != NULL)
- dma_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
-
- if ((Command->CommandIdentifier
- % Controller->CommandAllocationGroupSize) == 1) {
- /*
- * We can't free the group of commands until all of the
- * request sense and scatter gather dma structures are free.
- * Remember the beginning of the group, but don't free it
- * until we've reached the beginning of the next group.
- */
- kfree(CommandGroup);
- CommandGroup = Command;
- }
- Controller->Commands[i] = NULL;
- }
- kfree(CommandGroup);
-
- if (Controller->CombinedStatusBuffer != NULL)
- {
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NULL;
- Controller->CurrentStatusBuffer = NULL;
- }
-
- dma_pool_destroy(ScatterGatherPool);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return;
-
- dma_pool_destroy(RequestSensePool);
-
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- kfree(Controller->V2.LogicalDeviceInformation[i]);
- Controller->V2.LogicalDeviceInformation[i] = NULL;
- }
-
- for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
- {
- kfree(Controller->V2.PhysicalDeviceInformation[i]);
- Controller->V2.PhysicalDeviceInformation[i] = NULL;
- kfree(Controller->V2.InquiryUnitSerialNumber[i]);
- Controller->V2.InquiryUnitSerialNumber[i] = NULL;
- }
-}
-
-
-/*
- DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
- Firmware Controllers.
-*/
-
-static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandStatus = 0;
-}
-
-
-/*
- DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
- Firmware Controllers.
-*/
-
-static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- Command->V2.CommandStatus = 0;
-}
-
-
-/*
- DAC960_AllocateCommand allocates a Command structure from Controller's
- free list. During driver initialization, a special initialization command
- has been placed on the free list to guarantee that command allocation can
- never fail.
-*/
-
-static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
- *Controller)
-{
- DAC960_Command_T *Command = Controller->FreeCommands;
- if (Command == NULL) return NULL;
- Controller->FreeCommands = Command->Next;
- Command->Next = NULL;
- return Command;
-}
-
-
-/*
- DAC960_DeallocateCommand deallocates Command, returning it to Controller's
- free list.
-*/
-
-static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
-
- Command->Request = NULL;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
-}
-
-
-/*
- DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
-*/
-
-static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
-{
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
- spin_lock_irq(&Controller->queue_lock);
-}
-
-/*
- DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
-*/
-
-static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
-
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
-
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
-
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
-
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
-
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-/*
- DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
-*/
-
-static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
-*/
-
-static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
-*/
-
-static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
-*/
-
-static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- switch (CommandMailbox->Common.CommandOpcode)
- {
- case DAC960_V1_Enquiry:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
- break;
- case DAC960_V1_GetDeviceState:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
- break;
- case DAC960_V1_Read:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_ExecuteCommand executes Command and waits for completion.
-*/
-
-static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DECLARE_COMPLETION_ONSTACK(Completion);
- unsigned long flags;
- Command->Completion = &Completion;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- if (in_interrupt())
- return;
- wait_for_completion(&Completion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char CommandOpcode2,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
- CommandMailbox->Type3B.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char Channel,
- unsigned char TargetID,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
- Reading IOCTL Command and waits for completion. It returns true on success
- and false on failure.
-
- Return data in The controller's HealthStatusBuffer, which is dma-able memory
-*/
-
-static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
- Information Reading IOCTL Command and waits for completion. It returns
- true on success and false on failure.
-
- Data is returned in the controller's V2.NewControllerInformation dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
- Device Information Reading IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- Data is returned in the controller's V2.NewLogicalDeviceInformation
-*/
-
-static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned short LogicalDeviceNumber)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->LogicalDeviceInfo.CommandOpcode =
- DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
- Physical Device Information" IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- The Channel, TargetID, LogicalUnit arguments should be 0 the first time
- this function is called for a given controller. This will return data
- for the "first" device on that controller. The returned data includes a
- Channel, TargetID, LogicalUnit that can be passed in to this routine to
- get data for the NEXT device on that controller.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-
-*/
-
-static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned char LogicalUnit)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-static void DAC960_V2_ConstructNewUnitSerialNumber(
- DAC960_Controller_T *Controller,
- DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
- int LogicalUnit)
-{
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
- CommandMailbox->SCSI_10.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->SCSI_10.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->SCSI_10.DataTransferSize =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
- CommandMailbox->SCSI_10.CDBLength = 6;
- CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
- CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
- CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
- CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
- CommandMailbox->SCSI_10.SCSI_CDB[4] =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewInquiryUnitSerialNumberDMA;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
-}
-
-
-/*
- DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
- Inquiry command to a SCSI device identified by Channel number,
- Target id, Logical Unit Number. This function Waits for completion
- of the command.
-
- The return data includes Unit Serial Number information for the
- specified device.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
- int Channel, int TargetID, int LogicalUnit)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- Command = DAC960_AllocateCommand(Controller);
- CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Channel, TargetID, LogicalUnit);
-
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
- Operation IOCTL Command and waits for completion. It returns true on
- success and false on failure.
-*/
-
-static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
- DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
- DAC960_V2_OperationDevice_T
- OperationDevice)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->DeviceOperation.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->DeviceOperation.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
- CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V1 Firmware Controllers.
-
- PD and P controller types have no memory mailbox, but still need the
- other dma mapped memory.
-*/
-
-static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_HardwareType_T hw_type = Controller->HardwareType;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- int TimeoutCounter;
- int i;
-
- memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
- CommandMailboxesSize = 0;
- StatusMailboxesSize = 0;
- } else {
- CommandMailboxesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
- }
- DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
- sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
- sizeof(DAC960_V1_RebuildProgress_T) +
- sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
- sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
- sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
- return false;
-
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- goto skip_mailboxes;
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
- Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
- Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
-
-skip_mailboxes:
- Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DCDB_T),
- &Controller->V1.MonitoringDCDB_DMA);
-
- Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_Enquiry_T),
- &Controller->V1.NewEnquiryDMA);
-
- Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_ErrorTable_T),
- &Controller->V1.NewErrorTableDMA);
-
- Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_EventLogEntry_T),
- &Controller->V1.EventLogEntryDMA);
-
- Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_RebuildProgress_T),
- &Controller->V1.RebuildProgressDMA);
-
- Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T),
- &Controller->V1.NewLogicalDriveInformationDMA);
-
- Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T),
- &Controller->V1.BackgroundInitializationStatusDMA);
-
- Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DeviceState_T),
- &Controller->V1.NewDeviceStateDMA);
-
- Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_T),
- &Controller->V1.NewInquiryStandardDataDMA);
-
- Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V1.NewInquiryUnitSerialNumberDMA);
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- return true;
-
- /* Enable the Memory Mailbox Interface. */
- Controller->V1.DualModeMemoryMailboxInterface = true;
- CommandMailbox.TypeX.CommandOpcode = 0x2B;
- CommandMailbox.TypeX.CommandIdentifier = 0;
- CommandMailbox.TypeX.CommandOpcode2 = 0x14;
- CommandMailbox.TypeX.CommandMailboxesBusAddress =
- Controller->V1.FirstCommandMailboxDMA;
- CommandMailbox.TypeX.StatusMailboxesBusAddress =
- Controller->V1.FirstStatusMailboxDMA;
-#define TIMEOUT_COUNT 1000000
-
- for (i = 0; i < 2; i++)
- switch (Controller->HardwareType)
- {
- case DAC960_LA_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_LA_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- case DAC960_PG_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
-
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_PG_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- break;
- }
- return false;
-}
-
-
-/*
- DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V2 Firmware Controllers.
-
- Aggregate the space needed for the controller's memory mailbox and
- the other data structures that will be targets of dma transfers with
- the controller. Allocate a dma-mapped region of memory to hold these
- structures. Then, save CPU pointers and dma_addr_t values to reference
- the structures that are contained in that region.
-*/
-
-static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- dma_addr_t CommandMailboxDMA;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)) &&
- pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- /* This is a temporary dma mapping, used only in the scope of this function */
- CommandMailbox = pci_alloc_consistent(PCI_Device,
- sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
- if (CommandMailbox == NULL)
- return false;
-
- CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
- DmaPagesSize =
- CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V2_HealthStatusBuffer_T) +
- sizeof(DAC960_V2_ControllerInfo_T) +
- sizeof(DAC960_V2_LogicalDeviceInfo_T) +
- sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
- sizeof(DAC960_V2_Event_T) +
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return false;
- }
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
- Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
- Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
-
- Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_HealthStatusBuffer_T),
- &Controller->V2.HealthStatusBufferDMA);
-
- Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_ControllerInfo_T),
- &Controller->V2.NewControllerInformationDMA);
-
- Controller->V2.NewLogicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_LogicalDeviceInfo_T),
- &Controller->V2.NewLogicalDeviceInformationDMA);
-
- Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- &Controller->V2.NewPhysicalDeviceInformationDMA);
-
- Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V2.NewInquiryUnitSerialNumberDMA);
-
- Controller->V2.Event = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_Event_T),
- &Controller->V2.EventDMA);
-
- Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
- &Controller->V2.PhysicalToLogicalDeviceDMA);
-
- /*
- Enable the Memory Mailbox Interface.
-
- I don't know why we can't just use one of the memory mailboxes
- we just allocated to do this, instead of using this temporary one.
- Try this change later.
- */
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
- CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
- (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
- (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
- CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
- Controller->V2.FirstCommandMailboxDMA;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
- Controller->V2.FirstStatusMailboxDMA;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_BA_Controller:
- while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_LP_Controller:
- while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- CommandStatus = DAC960_V2_AbormalCompletion;
- break;
- }
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V1 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V1_Enquiry2_T *Enquiry2;
- dma_addr_t Enquiry2DMA;
- DAC960_V1_Config2_T *Config2;
- dma_addr_t Config2DMA;
- int LogicalDriveNumber, Channel, TargetID;
- struct dma_loaf local_dma;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
-
- Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
- Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
- Controller->V1.NewEnquiryDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY");
- }
- memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "READ CONFIG2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformationDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
-
- for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
- for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
- if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
- Channel, TargetID,
- Controller->V1.NewDeviceStateDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET DEVICE STATE");
- }
- memcpy(&Controller->V1.DeviceState[Channel][TargetID],
- Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
- }
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- switch (Enquiry2->HardwareID.SubModel)
- {
- case DAC960_V1_P_PD_PU:
- if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
- strcpy(Controller->ModelName, "DAC960PU");
- else strcpy(Controller->ModelName, "DAC960PD");
- break;
- case DAC960_V1_PL:
- strcpy(Controller->ModelName, "DAC960PL");
- break;
- case DAC960_V1_PG:
- strcpy(Controller->ModelName, "DAC960PG");
- break;
- case DAC960_V1_PJ:
- strcpy(Controller->ModelName, "DAC960PJ");
- break;
- case DAC960_V1_PR:
- strcpy(Controller->ModelName, "DAC960PR");
- break;
- case DAC960_V1_PT:
- strcpy(Controller->ModelName, "DAC960PT");
- break;
- case DAC960_V1_PTL0:
- strcpy(Controller->ModelName, "DAC960PTL0");
- break;
- case DAC960_V1_PRL:
- strcpy(Controller->ModelName, "DAC960PRL");
- break;
- case DAC960_V1_PTL1:
- strcpy(Controller->ModelName, "DAC960PTL1");
- break;
- case DAC960_V1_1164P:
- strcpy(Controller->ModelName, "DAC1164P");
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "MODEL VERIFICATION");
- }
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field and verify that it
- is a supported firmware version. The supported firmware versions are:
-
- DAC1164P 5.06 and above
- DAC960PTL/PRL/PJ/PG 4.06 and above
- DAC960PU/PD/PL 3.51 and above
- DAC960PU/PD/PL/P 2.73 and above
- */
-#if defined(CONFIG_ALPHA)
- /*
- DEC Alpha machines were often equipped with DAC960 cards that were
- OEMed from Mylex, and had their own custom firmware. Version 2.70,
- the last custom FW revision to be released by DEC for these older
- controllers, appears to work quite well with this driver.
-
- Cards tested successfully were several versions each of the PD and
- PU, called by DEC the KZPSC and KZPAC, respectively, and having
- the Manufacturer Numbers (from Mylex), usually on a sticker on the
- back of the board, of:
-
- KZPSC: D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
- KZPAC: D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
- */
-# define FIRMWARE_27X "2.70"
-#else
-# define FIRMWARE_27X "2.73"
-#endif
-
- if (Enquiry2->FirmwareID.MajorVersion == 0)
- {
- Enquiry2->FirmwareID.MajorVersion =
- Controller->V1.Enquiry.MajorFirmwareVersion;
- Enquiry2->FirmwareID.MinorVersion =
- Controller->V1.Enquiry.MinorFirmwareVersion;
- Enquiry2->FirmwareID.FirmwareType = '0';
- Enquiry2->FirmwareID.TurnID = 0;
- }
- snprintf(Controller->FirmwareVersion, sizeof(Controller->FirmwareVersion),
- "%d.%02d-%c-%02d",
- Enquiry2->FirmwareID.MajorVersion,
- Enquiry2->FirmwareID.MinorVersion,
- Enquiry2->FirmwareID.FirmwareType,
- Enquiry2->FirmwareID.TurnID);
- if (!((Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '3' &&
- strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
- (Controller->FirmwareVersion[0] == '2' &&
- strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
- {
- DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
- DAC960_Error("Firmware Version = '%s'\n", Controller,
- Controller->FirmwareVersion);
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return false;
- }
- /*
- Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
- Enclosure Management Enabled fields.
- */
- Controller->Channels = Enquiry2->ActualChannels;
- Controller->Targets = Enquiry2->MaxTargets;
- Controller->MemorySize = Enquiry2->MemorySize >> 20;
- Controller->V1.SAFTE_EnclosureManagementEnabled =
- (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount =
- Controller->V1.Enquiry.NumberOfLogicalDrives;
- Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
- Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
- /*
- Initialize the Stripe Size, Segment Size, and Geometry Translation.
- */
- Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- switch (Config2->DriveGeometry)
- {
- case DAC960_V1_Geometry_128_32:
- Controller->V1.GeometryTranslationHeads = 128;
- Controller->V1.GeometryTranslationSectors = 32;
- break;
- case DAC960_V1_Geometry_255_63:
- Controller->V1.GeometryTranslationHeads = 255;
- Controller->V1.GeometryTranslationSectors = 63;
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
- }
- /*
- Initialize the Background Initialization Status.
- */
- if ((Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
- (Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.08") >= 0))
- {
- Controller->V1.BackgroundInitializationStatusSupported = true;
- DAC960_V1_ExecuteType3B(Controller,
- DAC960_V1_BackgroundInitializationControl, 0x20,
- Controller->
- V1.BackgroundInitializationStatusDMA);
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- }
- /*
- Initialize the Logical Drive Initially Accessible flag.
- */
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- if (Controller->V1.LogicalDriveInformation
- [LogicalDriveNumber].LogicalDriveState !=
- DAC960_V1_LogicalDrive_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
- Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V2 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned short LogicalDeviceNumber = 0;
- int ModelNameLength;
-
- /* Get data into dma-able area, then copy into permanent location */
- if (!DAC960_V2_NewControllerInfo(Controller))
- return DAC960_Failure(Controller, "GET CONTROLLER INFO");
- memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
- sizeof(DAC960_V2_ControllerInfo_T));
-
-
- if (!DAC960_V2_GeneralInfo(Controller))
- return DAC960_Failure(Controller, "GET HEALTH STATUS");
-
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- ModelNameLength = sizeof(ControllerInfo->ControllerName);
- if (ModelNameLength > sizeof(Controller->ModelName)-1)
- ModelNameLength = sizeof(Controller->ModelName)-1;
- memcpy(Controller->ModelName, ControllerInfo->ControllerName,
- ModelNameLength);
- ModelNameLength--;
- while (Controller->ModelName[ModelNameLength] == ' ' ||
- Controller->ModelName[ModelNameLength] == '\0')
- ModelNameLength--;
- Controller->ModelName[++ModelNameLength] = '\0';
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field.
- */
- sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
- ControllerInfo->FirmwareMajorVersion,
- ControllerInfo->FirmwareMinorVersion,
- ControllerInfo->FirmwareTurnNumber);
- if (ControllerInfo->FirmwareMajorVersion == 6 &&
- ControllerInfo->FirmwareMinorVersion == 0 &&
- ControllerInfo->FirmwareTurnNumber < 1)
- {
- DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
- Controller, Controller->FirmwareVersion);
- DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
- Controller);
- DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
- Controller);
- }
- /*
- Initialize the Controller Channels, Targets, and Memory Size.
- */
- Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
- Controller->Targets =
- ControllerInfo->MaximumTargetsPerChannel
- [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
- Controller->MemorySize = ControllerInfo->MemorySizeMB;
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
- Controller->MaxBlocksPerCommand =
- ControllerInfo->MaximumDataTransferSizeInBlocks;
- Controller->ControllerScatterGatherLimit =
- ControllerInfo->MaximumScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
- /*
- Initialize the Logical Device Information.
- */
- while (true)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
-
- if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
- break;
- LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
- if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
- DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
- Controller, LogicalDeviceNumber);
- break;
- }
- if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
- DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
- Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
- LogicalDeviceNumber++;
- continue;
- }
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- DAC960_V2_LogicalDevice_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- if (LogicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- LogicalDeviceNumber++;
- }
- return true;
-}
-
-
-/*
- DAC960_ReportControllerConfiguration reports the Configuration Information
- for Controller.
-*/
-
-static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
- Controller, Controller->ModelName);
- DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
- Controller, Controller->FirmwareVersion,
- Controller->Channels, Controller->MemorySize);
- DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
- Controller, Controller->Bus,
- Controller->Device, Controller->Function);
- if (Controller->IO_Address == 0)
- DAC960_Info("Unassigned\n", Controller);
- else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
- DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
- Controller, Controller->PCI_Address,
- (unsigned long) Controller->BaseAddress,
- Controller->IRQ_Channel);
- DAC960_Info(" Controller Queue Depth: %d, "
- "Maximum Blocks per Command: %d\n",
- Controller, Controller->ControllerQueueDepth,
- Controller->MaxBlocksPerCommand);
- DAC960_Info(" Driver Queue Depth: %d, "
- "Scatter/Gather Limit: %d of %d Segments\n",
- Controller, Controller->DriverQueueDepth,
- Controller->DriverScatterGatherLimit,
- Controller->ControllerScatterGatherLimit);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, "
- "BIOS Geometry: %d/%d\n", Controller,
- Controller->V1.StripeSize,
- Controller->V1.SegmentSize,
- Controller->V1.GeometryTranslationHeads,
- Controller->V1.GeometryTranslationSectors);
- if (Controller->V1.SAFTE_EnclosureManagementEnabled)
- DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller);
- }
- return true;
-}
-
-
-/*
- DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
- Inquiry Unit Serial Number information for each device connected to
- Controller.
-*/
-
-static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- struct dma_loaf local_dma;
-
- dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
- DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
-
- struct completion Completions[DAC960_V1_MaxChannels];
- unsigned long flags;
- int Channel, TargetID;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
- sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
- return DAC960_Failure(Controller,
- "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
-
- for (Channel = 0; Channel < Controller->Channels; Channel++) {
- DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
- SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_T),
- SCSI_Inquiry_dma + Channel);
- SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- SCSI_NewInquiryUnitSerialNumberDMA + Channel);
- }
-
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- /*
- * For each channel, submit a probe for a device on that channel.
- * The timeout interval for a device that is present is 10 seconds.
- * With this approach, the timeout periods can elapse in parallel
- * on each channel.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- dma_addr_t DCDB_dma = DCDBs_dma[Channel];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- struct completion *Completion = &Completions[Channel];
-
- init_completion(Completion);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- Command->Completion = Completion;
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
- DCDB->Channel = Channel;
- DCDB->TargetID = TargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- /*
- * Wait for the problems submitted in the previous loop
- * to complete. On the probes that are successful,
- * get the serial number of the device that was found.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- SCSI_NewInquiryUnitSerialNumberDMA[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- SCSI_NewInquiryUnitSerialNumberCPU[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- struct completion *Completion = &Completions[Channel];
-
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- continue;
- } else
- memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
-
- /* Preserve Channel and TargetID values from the previous loop */
- Command->Completion = Completion;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- }
- }
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V2 Firmware Controllers by requesting the Physical Device
- Information and SCSI Inquiry Unit Serial Number information for each
- device connected to Controller.
-*/
-
-static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
- unsigned short PhysicalDeviceIndex = 0;
-
- while (true)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
-
- if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
- break;
-
- PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- GFP_ATOMIC);
- if (PhysicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
-
- InquiryUnitSerialNumber = kmalloc(
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL) {
- kfree(PhysicalDeviceInfo);
- return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
- }
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
-
- Channel = NewPhysicalDeviceInfo->Channel;
- TargetID = NewPhysicalDeviceInfo->TargetID;
- LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
-
- /*
- Some devices do NOT have Unit Serial Numbers.
- This command fails for them. But, we still want to
- remember those devices are there. Construct a
- UnitSerialNumber structure for the failure case.
- */
- if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- PhysicalDeviceIndex++;
- LogicalUnit++;
- }
- return true;
-}
-
-
-/*
- DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
- Product Serial Number fields of the Inquiry Standard Data and Inquiry
- Unit Serial Number structures.
-*/
-
-static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
- *InquiryStandardData,
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber,
- unsigned char *Vendor,
- unsigned char *Model,
- unsigned char *Revision,
- unsigned char *SerialNumber)
-{
- int SerialNumberLength, i;
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
- for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
- {
- unsigned char VendorCharacter =
- InquiryStandardData->VendorIdentification[i];
- Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
- ? VendorCharacter : ' ');
- }
- Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
- {
- unsigned char ModelCharacter =
- InquiryStandardData->ProductIdentification[i];
- Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
- ? ModelCharacter : ' ');
- }
- Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
- {
- unsigned char RevisionCharacter =
- InquiryStandardData->ProductRevisionLevel[i];
- Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
- ? RevisionCharacter : ' ');
- }
- Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
- if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
- SerialNumberLength = InquiryUnitSerialNumber->PageLength;
- if (SerialNumberLength >
- sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
- SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
- for (i = 0; i < SerialNumberLength; i++)
- {
- unsigned char SerialNumberCharacter =
- InquiryUnitSerialNumber->ProductSerialNumber[i];
- SerialNumber[i] =
- (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
- ? SerialNumberCharacter : ' ');
- }
- SerialNumber[SerialNumberLength] = '\0';
-}
-
-
-/*
- DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V1 Firmware Controllers.
-*/
-
-static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int LogicalDriveNumber, Channel, TargetID;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *ErrorEntry =
- &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber
- ->ProductSerialNumber)];
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType)
- {
- if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
- DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n",
- Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize,
- Controller->V1.DeviceResetCount[Channel][TargetID]);
- else
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize);
- }
- if (ErrorEntry->ParityErrorCount > 0 ||
- ErrorEntry->SoftErrorCount > 0 ||
- ErrorEntry->HardErrorCount > 0 ||
- ErrorEntry->MiscErrorCount > 0)
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- ErrorEntry->ParityErrorCount,
- ErrorEntry->SoftErrorCount,
- ErrorEntry->HardErrorCount,
- ErrorEntry->MiscErrorCount);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDriveInformation->RAIDLevel,
- (LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "Online"
- : LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "Critical" : "Offline"),
- LogicalDriveInformation->LogicalDriveSize,
- (LogicalDriveInformation->WriteBack
- ? "Write Back" : "Write Thru"));
- }
- return true;
-}
-
-
-/*
- DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V2 Firmware Controllers.
-*/
-
-static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int PhysicalDeviceIndex, LogicalDriveNumber;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (PhysicalDeviceIndex = 0;
- PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
- PhysicalDeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
- DAC960_Info(" %sAsynchronous\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""));
- else
- DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""),
- (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
- * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (PhysicalDeviceInfo->PhysicalDeviceState ==
- DAC960_V2_Device_Unconfigured)
- continue;
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "Online"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "Rebuild"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "Missing"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "Critical"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "Suspected-Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "Commanded-Offline"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "Standby" : "Unknown"),
- PhysicalDeviceInfo->ConfigurableDeviceSize);
- if (PhysicalDeviceInfo->ParityErrors == 0 &&
- PhysicalDeviceInfo->SoftErrors == 0 &&
- PhysicalDeviceInfo->HardErrors == 0 &&
- PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
- PhysicalDeviceInfo->CommandTimeouts == 0 &&
- PhysicalDeviceInfo->Retries == 0 &&
- PhysicalDeviceInfo->Aborts == 0 &&
- PhysicalDeviceInfo->PredictedFailuresDetected == 0)
- continue;
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- PhysicalDeviceInfo->ParityErrors,
- PhysicalDeviceInfo->SoftErrors,
- PhysicalDeviceInfo->HardErrors,
- PhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Info(" Timeouts: %d, Retries: %d, "
- "Aborts: %d, Predicted: %d\n", Controller,
- PhysicalDeviceInfo->CommandTimeouts,
- PhysicalDeviceInfo->Retries,
- PhysicalDeviceInfo->Aborts,
- PhysicalDeviceInfo->PredictedFailuresDetected);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- static const unsigned char *ReadCacheStatus[] = {
- "Read Cache Disabled",
- "Read Cache Enabled",
- "Read Ahead Enabled",
- "Intelligent Read Ahead Enabled",
- "-", "-", "-", "-"
- };
- static const unsigned char *WriteCacheStatus[] = {
- "Write Cache Disabled",
- "Logical Device Read Only",
- "Write Cache Enabled",
- "Intelligent Write Cache Enabled",
- "-", "-", "-", "-"
- };
- unsigned char *GeometryTranslation;
- if (LogicalDeviceInfo == NULL) continue;
- switch (LogicalDeviceInfo->DriveGeometry)
- {
- case DAC960_V2_Geometry_128_32:
- GeometryTranslation = "128/32";
- break;
- case DAC960_V2_Geometry_255_63:
- GeometryTranslation = "255/63";
- break;
- default:
- GeometryTranslation = "Invalid";
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- Controller, LogicalDeviceInfo->DriveGeometry);
- break;
- }
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDeviceInfo->RAIDLevel,
- (LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "Online"
- : LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "Critical" : "Offline"),
- LogicalDeviceInfo->ConfigurableDeviceSize);
- DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n",
- Controller,
- (LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Initialized" : "Uninitialized"),
- GeometryTranslation);
- if (LogicalDeviceInfo->StripeSize == 0)
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: N/A\n", Controller);
- else
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- else
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: N/A\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2));
- else
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2),
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- DAC960_Info(" %s, %s\n", Controller,
- ReadCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
- WriteCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
- if (LogicalDeviceInfo->SoftErrors > 0 ||
- LogicalDeviceInfo->CommandsFailed > 0 ||
- LogicalDeviceInfo->DeferredWriteErrors)
- DAC960_Info(" Errors - Soft: %d, Failed: %d, "
- "Deferred Write: %d\n", Controller,
- LogicalDeviceInfo->SoftErrors,
- LogicalDeviceInfo->CommandsFailed,
- LogicalDeviceInfo->DeferredWriteErrors);
-
- }
- return true;
-}
-
-/*
- DAC960_RegisterBlockDevice registers the Block Device structures
- associated with Controller.
-*/
-
-static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int n;
-
- /*
- Register the Block Device Major Number for this DAC960 Controller.
- */
- if (register_blkdev(MajorNumber, "dac960") < 0)
- return false;
-
- for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
- struct gendisk *disk = Controller->disks[n];
- struct request_queue *RequestQueue;
-
- /* for now, let all request queues share controller's lock */
- RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
- if (!RequestQueue) {
- printk("DAC960: failure to allocate request queue\n");
- continue;
- }
- Controller->RequestQueue[n] = RequestQueue;
- RequestQueue->queuedata = Controller;
- blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
- disk->queue = RequestQueue;
- sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
- disk->major = MajorNumber;
- disk->first_minor = n << DAC960_MaxPartitionsBits;
- disk->fops = &DAC960_BlockDeviceOperations;
- }
- /*
- Indicate the Block Device Registration completed successfully,
- */
- return true;
-}
-
-
-/*
- DAC960_UnregisterBlockDevice unregisters the Block Device structures
- associated with Controller.
-*/
-
-static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int disk;
-
- /* does order matter when deleting gendisk and cleanup in request queue? */
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- del_gendisk(Controller->disks[disk]);
- blk_cleanup_queue(Controller->RequestQueue[disk]);
- Controller->RequestQueue[disk] = NULL;
- }
-
- /*
- Unregister the Block Device Major Number for this DAC960 Controller.
- */
- unregister_blkdev(MajorNumber, "dac960");
-}
-
-/*
- DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
- Information Partition Sector Counts and Block Sizes.
-*/
-
-static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
-{
- int disk;
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
-}
-
-/*
- DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
- the Error Status Register when the driver performs the BIOS handshaking.
- It returns true for fatal errors and false otherwise.
-*/
-
-static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
- unsigned char ErrorStatus,
- unsigned char Parameter0,
- unsigned char Parameter1)
-{
- switch (ErrorStatus)
- {
- case 0x00:
- DAC960_Notice("Physical Device %d:%d Not Responding\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0x08:
- if (Controller->DriveSpinUpMessageDisplayed) break;
- DAC960_Notice("Spinning Up Drives\n", Controller);
- Controller->DriveSpinUpMessageDisplayed = true;
- break;
- case 0x30:
- DAC960_Notice("Configuration Checksum Error\n", Controller);
- break;
- case 0x60:
- DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
- break;
- case 0x70:
- DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
- break;
- case 0x90:
- DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0xA0:
- DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
- break;
- case 0xB0:
- DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
- break;
- case 0xD0:
- DAC960_Notice("New Controller Configuration Found\n", Controller);
- break;
- case 0xF0:
- DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
- return true;
- default:
- DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
- Controller, ErrorStatus);
- return true;
- }
- return false;
-}
-
-
-/*
- * DAC960_DetectCleanup releases the resources that were allocated
- * during DAC960_DetectController(). DAC960_DetectController can
- * has several internal failure points, so not ALL resources may
- * have been allocated. It's important to free only
- * resources that HAVE been allocated. The code below always
- * tests that the resource has been allocated before attempting to
- * free it.
- */
-static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
-{
- int i;
-
- /* Free the memory mailbox, status, and related structures */
- free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
- if (Controller->MemoryMappedAddress) {
- switch(Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PD_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_P_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- }
- iounmap(Controller->MemoryMappedAddress);
- }
- if (Controller->IRQ_Channel)
- free_irq(Controller->IRQ_Channel, Controller);
- if (Controller->IO_Address)
- release_region(Controller->IO_Address, 0x80);
- pci_disable_device(Controller->PCIDevice);
- for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
- put_disk(Controller->disks[i]);
- DAC960_Controllers[Controller->ControllerNumber] = NULL;
- kfree(Controller);
-}
-
-
-/*
- DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
- PCI RAID Controllers by interrogating the PCI Configuration Space for
- Controller Type.
-*/
-
-static DAC960_Controller_T *
-DAC960_DetectController(struct pci_dev *PCI_Device,
- const struct pci_device_id *entry)
-{
- struct DAC960_privdata *privdata =
- (struct DAC960_privdata *)entry->driver_data;
- irq_handler_t InterruptHandler = privdata->InterruptHandler;
- unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
- DAC960_Controller_T *Controller = NULL;
- unsigned char DeviceFunction = PCI_Device->devfn;
- unsigned char ErrorStatus, Parameter0, Parameter1;
- unsigned int IRQ_Channel;
- void __iomem *BaseAddress;
- int i;
-
- Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
- if (Controller == NULL) {
- DAC960_Error("Unable to allocate Controller structure for "
- "Controller at\n", NULL);
- return NULL;
- }
- Controller->ControllerNumber = DAC960_ControllerCount;
- DAC960_Controllers[DAC960_ControllerCount++] = Controller;
- Controller->Bus = PCI_Device->bus->number;
- Controller->FirmwareType = privdata->FirmwareType;
- Controller->HardwareType = privdata->HardwareType;
- Controller->Device = DeviceFunction >> 3;
- Controller->Function = DeviceFunction & 0x7;
- Controller->PCIDevice = PCI_Device;
- strcpy(Controller->FullModelName, "DAC960");
-
- if (pci_enable_device(PCI_Device))
- goto Failure;
-
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_BA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LP_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PG_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PD_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- case DAC960_P_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- }
-
- pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
- if (!Controller->disks[i])
- goto Failure;
- Controller->disks[i]->private_data = (void *)((long)i);
- }
- init_waitqueue_head(&Controller->CommandWaitQueue);
- init_waitqueue_head(&Controller->HealthStatusWaitQueue);
- spin_lock_init(&Controller->queue_lock);
- DAC960_AnnounceDriver(Controller);
- /*
- Map the Controller Register Window.
- */
- if (MemoryWindowSize < PAGE_SIZE)
- MemoryWindowSize = PAGE_SIZE;
- Controller->MemoryMappedAddress =
- ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
- Controller->BaseAddress =
- Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
- if (Controller->MemoryMappedAddress == NULL)
- {
- DAC960_Error("Unable to map Controller Register Window for "
- "Controller at\n", Controller);
- goto Failure;
- }
- BaseAddress = Controller->BaseAddress;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(BaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_GEM_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_GEM_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_GEM_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(BaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_BA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_BA_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_BA_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(BaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LP_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LP_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_LP_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(BaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LA_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(BaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PG_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PG_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PD_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)) {
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_PD_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_P_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)){
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory"
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_P_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- }
- /*
- Acquire shared access to the IRQ Channel.
- */
- IRQ_Channel = PCI_Device->irq;
- if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
- Controller->FullModelName, Controller) < 0)
- {
- DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
- Controller, Controller->IRQ_Channel);
- goto Failure;
- }
- Controller->IRQ_Channel = IRQ_Channel;
- Controller->InitialCommand.CommandIdentifier = 1;
- Controller->InitialCommand.Controller = Controller;
- Controller->Commands[0] = &Controller->InitialCommand;
- Controller->FreeCommands = &Controller->InitialCommand;
- return Controller;
-
-Failure:
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_DetectCleanup(Controller);
- DAC960_ControllerCount--;
- return NULL;
-}
-
-/*
- DAC960_InitializeController initializes Controller.
-*/
-
-static bool
-DAC960_InitializeController(DAC960_Controller_T *Controller)
-{
- if (DAC960_ReadControllerConfiguration(Controller) &&
- DAC960_ReportControllerConfiguration(Controller) &&
- DAC960_CreateAuxiliaryStructures(Controller) &&
- DAC960_ReadDeviceConfiguration(Controller) &&
- DAC960_ReportDeviceConfiguration(Controller) &&
- DAC960_RegisterBlockDevice(Controller))
- {
- /*
- Initialize the Monitoring Timer.
- */
- timer_setup(&Controller->MonitoringTimer,
- DAC960_MonitoringTimerFunction, 0);
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- Controller->ControllerInitialized = true;
- return true;
- }
- return false;
-}
-
-
-/*
- DAC960_FinalizeController finalizes Controller.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerInitialized)
- {
- unsigned long flags;
-
- /*
- * Acquiring and releasing lock here eliminates
- * a very low probability race.
- *
- * The code below allocates controller command structures
- * from the free list without holding the controller lock.
- * This is safe assuming there is no other activity on
- * the controller at the time.
- *
- * But, there might be a monitoring command still
- * in progress. Setting the Shutdown flag while holding
- * the lock ensures that there is no monitoring command
- * in the interrupt handler currently, and any monitoring
- * commands that complete from this time on will NOT return
- * their command structure to the free list.
- */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- Controller->ShutdownMonitoringTimer = 1;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- del_timer_sync(&Controller->MonitoringTimer);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
- DAC960_Notice("done\n", Controller);
-
- if (Controller->HardwareType == DAC960_PD_Controller)
- release_region(Controller->IO_Address, 0x80);
- }
- else
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
- DAC960_V2_RAID_Controller);
- DAC960_Notice("done\n", Controller);
- }
- }
- DAC960_UnregisterBlockDevice(Controller);
- DAC960_DestroyAuxiliaryStructures(Controller);
- DAC960_DestroyProcEntries(Controller);
- DAC960_DetectCleanup(Controller);
-}
-
-
-/*
- DAC960_Probe verifies controller's existence and
- initializes the DAC960 Driver for that controller.
-*/
-
-static int
-DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
-{
- int disk;
- DAC960_Controller_T *Controller;
-
- if (DAC960_ControllerCount == DAC960_MaxControllers)
- {
- DAC960_Error("More than %d DAC960 Controllers detected - "
- "ignoring from Controller at\n",
- NULL, DAC960_MaxControllers);
- return -ENODEV;
- }
-
- Controller = DAC960_DetectController(dev, entry);
- if (!Controller)
- return -ENODEV;
-
- if (!DAC960_InitializeController(Controller)) {
- DAC960_FinalizeController(Controller);
- return -ENODEV;
- }
-
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
- add_disk(Controller->disks[disk]);
- }
- DAC960_CreateProcEntries(Controller);
- return 0;
-}
-
-
-/*
- DAC960_Finalize finalizes the DAC960 Driver.
-*/
-
-static void DAC960_Remove(struct pci_dev *PCI_Device)
-{
- int Controller_Number = (long)pci_get_drvdata(PCI_Device);
- DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
- if (Controller != NULL)
- DAC960_FinalizeController(Controller);
-}
-
-
-/*
- DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
- Command->V1.ScatterGatherList;
- struct scatterlist *ScatterList = Command->V1.ScatterList;
-
- DAC960_V1_ClearCommand(Command);
-
- if (Command->SegmentCount == 1)
- {
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- }
- else
- {
- int i;
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
-
- CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- struct scatterlist *ScatterList = Command->V2.ScatterList;
-
- DAC960_V2_ClearCommand(Command);
-
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
- CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE);
- CommandMailbox->SCSI_10.DataTransferSize =
- Command->BlockCount << DAC960_BlockSizeBits;
- CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
- CommandMailbox->SCSI_10.PhysicalDevice =
- Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
- CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
- CommandMailbox->SCSI_10.CDBLength = 10;
- CommandMailbox->SCSI_10.SCSI_CDB[0] =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
- CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
- CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
- CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
- CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
-
- if (Command->SegmentCount == 1)
- {
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
- }
- else
- {
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- int i;
-
- if (Command->SegmentCount > 2)
- {
- ScatterGatherList = Command->V2.ScatterGatherList;
- CommandMailbox->SCSI_10.CommandControlBits
- .AdditionalScatterGatherListMemory = true;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Address =
- Command->V2.ScatterGatherListDMA;
- }
- else
- ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
-{
- struct request *Request;
- DAC960_Command_T *Command;
-
- while(1) {
- Request = blk_peek_request(req_q);
- if (!Request)
- return 1;
-
- Command = DAC960_AllocateCommand(Controller);
- if (Command == NULL)
- return 0;
-
- if (rq_data_dir(Request) == READ) {
- Command->DmaDirection = PCI_DMA_FROMDEVICE;
- Command->CommandType = DAC960_ReadCommand;
- } else {
- Command->DmaDirection = PCI_DMA_TODEVICE;
- Command->CommandType = DAC960_WriteCommand;
- }
- Command->Completion = Request->end_io_data;
- Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = blk_rq_sectors(Request);
- Command->Request = Request;
- blk_start_request(Request);
- Command->SegmentCount = blk_rq_map_sg(req_q,
- Command->Request, Command->cmd_sglist);
- /* pci_map_sg MAY change the value of SegCount */
- Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- DAC960_QueueReadWriteCommand(Command);
- }
-}
-
-/*
- DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
- I/O Request Queue and queues it to the Controller. WaitForCommand is true if
- this function should wait for a Command to become available if necessary.
- This function returns true if an I/O Request was queued and false otherwise.
-*/
-static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
-{
- int i;
-
- if (!controller->ControllerInitialized)
- return;
-
- /* Do this better later! */
- for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-
- if (controller->req_q_index == 0)
- return;
-
- for (i = 0; i < controller->req_q_index; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-}
-
-
-/*
- DAC960_queue_partial_rw extracts one bio from the request already
- associated with argument command, and construct a new command block to retry I/O
- only on that bio. Queue that command to the controller.
-
- This function re-uses a previously-allocated Command,
- there is no failure mode from trying to allocate a command.
-*/
-
-static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- struct request *Request = Command->Request;
- struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- Command->CommandType = DAC960_ReadRetryCommand;
- else
- Command->CommandType = DAC960_WriteRetryCommand;
-
- /*
- * We could be more efficient with these mapping requests
- * and map only the portions that we need. But since this
- * code should almost never be called, just go with a
- * simple coding.
- */
- (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
-
- (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
- /*
- * Resubmitting the request sector at a time is really tedious.
- * But, this should almost never happen. So, we're willing to pay
- * this price so that in the end, as much of the transfer is completed
- * successfully as possible.
- */
- Command->SegmentCount = 1;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = 1;
- DAC960_QueueReadWriteCommand(Command);
- return;
-}
-
-/*
- DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
-*/
-
-static void DAC960_RequestFunction(struct request_queue *RequestQueue)
-{
- DAC960_ProcessRequest(RequestQueue->queuedata);
-}
-
-/*
- DAC960_ProcessCompletedBuffer performs completion processing for an
- individual Buffer.
-*/
-
-static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
- bool SuccessfulIO)
-{
- struct request *Request = Command->Request;
- blk_status_t Error = SuccessfulIO ? BLK_STS_OK : BLK_STS_IOERR;
-
- pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
- if (Command->Completion) {
- complete(Command->Completion);
- Command->Completion = NULL;
- }
- return true;
- }
- return false;
-}
-
-/*
- DAC960_V1_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_IrrecoverableDataError:
- DAC960_Error("Irrecoverable Data Error on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_LogicalDriveNonexistentOrOffline:
- DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_AccessBeyondEndOfLogicalDrive:
- DAC960_Error("Attempt to Access Beyond End of Logical Drive "
- "on %s:\n", Controller, CommandName);
- break;
- case DAC960_V1_BadDataEncountered:
- DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
- break;
- default:
- DAC960_Error("Unexpected Error Status %04X on %s:\n",
- Controller, Command->V1.CommandStatus, CommandName);
- break;
- }
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V1_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- Command->V1.CommandMailbox.Common.CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V1_IrrecoverableDataError;
-#endif
-
- if (CommandStatus == DAC960_V1_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
- CommandStatus == DAC960_V1_BadDataEncountered)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
-
- if (!DAC960_ProcessCompletedRequest(Command, false))
- BUG();
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V1_NormalCompletion) {
- normal_completion = false;
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V1 error retry failure test\n");
- normal_completion = false;
- DAC960_V1_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
-
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (CommandOpcode == DAC960_V1_Enquiry)
- {
- DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
- unsigned int OldCriticalLogicalDriveCount =
- OldEnquiry->CriticalLogicalDriveCount;
- unsigned int NewCriticalLogicalDriveCount =
- NewEnquiry->CriticalLogicalDriveCount;
- if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
- while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
- while (++LogicalDriveNumber < Controller->LogicalDriveCount)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->StatusFlags.DeferredWriteError !=
- OldEnquiry->StatusFlags.DeferredWriteError)
- DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
- (NewEnquiry->StatusFlags.DeferredWriteError
- ? "TRUE" : "FALSE"));
- if ((NewCriticalLogicalDriveCount > 0 ||
- NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
- (NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount !=
- OldEnquiry->OfflineLogicalDriveCount) ||
- (NewEnquiry->DeadDriveCount > 0 ||
- NewEnquiry->DeadDriveCount !=
- OldEnquiry->DeadDriveCount) ||
- (NewEnquiry->EventLogSequenceNumber !=
- OldEnquiry->EventLogSequenceNumber) ||
- Controller->MonitoringTimerCount == 0 ||
- time_after_eq(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- Controller->V1.NeedLogicalDriveInformation = true;
- Controller->V1.NewEventLogSequenceNumber =
- NewEnquiry->EventLogSequenceNumber;
- Controller->V1.NeedErrorTableInformation = true;
- Controller->V1.NeedDeviceStateInformation = true;
- Controller->V1.StartDeviceStateScan = true;
- Controller->V1.NeedBackgroundInitializationStatus =
- Controller->V1.BackgroundInitializationStatusSupported;
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
- {
- Controller->V1.NeedRebuildProgress = true;
- Controller->V1.RebuildProgressFirst =
- (NewEnquiry->CriticalLogicalDriveCount <
- OldEnquiry->CriticalLogicalDriveCount);
- }
- if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
- switch (NewEnquiry->RebuildFlag)
- {
- case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
- DAC960_Progress("Consistency Check Completed Successfully\n",
- Controller);
- break;
- case DAC960_V1_StandbyRebuildInProgress:
- case DAC960_V1_BackgroundRebuildInProgress:
- break;
- case DAC960_V1_BackgroundCheckInProgress:
- Controller->V1.NeedConsistencyCheckProgress = true;
- break;
- case DAC960_V1_StandbyRebuildCompletedWithError:
- DAC960_Progress("Consistency Check Completed with Error\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Physical Device Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Logical Drive Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
- DAC960_Progress("Consistency Check Failed - Other Causes\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
- DAC960_Progress("Consistency Check Successfully Terminated\n",
- Controller);
- break;
- }
- else if (NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundCheckInProgress)
- Controller->V1.NeedConsistencyCheckProgress = true;
- Controller->MonitoringAlertMode =
- (NewEnquiry->CriticalLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->DeadDriveCount > 0);
- if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
- {
- Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
- Controller->V1.RebuildFlagPending = true;
- }
- memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
- }
- else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
- {
- static char
- *DAC960_EventMessages[] =
- { "killed because write recovery failed",
- "killed because of SCSI bus reset failure",
- "killed because of double check condition",
- "killed because it was removed",
- "killed because of gross error on SCSI chip",
- "killed because of bad tag returned from drive",
- "killed because of timeout on SCSI command",
- "killed because of reset SCSI command issued from system",
- "killed because busy or parity error count exceeded limit",
- "killed because of 'kill drive' command from system",
- "killed because of selection timeout",
- "killed due to SCSI phase sequence error",
- "killed due to unknown status" };
- DAC960_V1_EventLogEntry_T *EventLogEntry =
- Controller->V1.EventLogEntry;
- if (EventLogEntry->SequenceNumber ==
- Controller->V1.OldEventLogSequenceNumber)
- {
- unsigned char SenseKey = EventLogEntry->SenseKey;
- unsigned char AdditionalSenseCode =
- EventLogEntry->AdditionalSenseCode;
- unsigned char AdditionalSenseCodeQualifier =
- EventLogEntry->AdditionalSenseCodeQualifier;
- if (SenseKey == DAC960_SenseKey_VendorSpecific &&
- AdditionalSenseCode == 0x80 &&
- AdditionalSenseCodeQualifier <
- ARRAY_SIZE(DAC960_EventMessages))
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- DAC960_EventMessages[
- AdditionalSenseCodeQualifier]);
- else if (SenseKey == DAC960_SenseKey_UnitAttention &&
- AdditionalSenseCode == 0x29)
- {
- if (Controller->MonitoringTimerCount > 0)
- Controller->V1.DeviceResetCount[EventLogEntry->Channel]
- [EventLogEntry->TargetID]++;
- }
- else if (!(SenseKey == DAC960_SenseKey_NoSense ||
- (SenseKey == DAC960_SenseKey_NotReady &&
- AdditionalSenseCode == 0x04 &&
- (AdditionalSenseCodeQualifier == 0x01 ||
- AdditionalSenseCodeQualifier == 0x02))))
- {
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- SenseKey,
- AdditionalSenseCode,
- AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- EventLogEntry->Information[0],
- EventLogEntry->Information[1],
- EventLogEntry->Information[2],
- EventLogEntry->Information[3],
- EventLogEntry->CommandSpecificInformation[0],
- EventLogEntry->CommandSpecificInformation[1],
- EventLogEntry->CommandSpecificInformation[2],
- EventLogEntry->CommandSpecificInformation[3]);
- }
- }
- Controller->V1.OldEventLogSequenceNumber++;
- }
- else if (CommandOpcode == DAC960_V1_GetErrorTable)
- {
- DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
- int Channel, TargetID;
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
- &NewErrorTable->ErrorTableEntries[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
- &OldErrorTable->ErrorTableEntries[Channel][TargetID];
- if ((NewErrorEntry->ParityErrorCount !=
- OldErrorEntry->ParityErrorCount) ||
- (NewErrorEntry->SoftErrorCount !=
- OldErrorEntry->SoftErrorCount) ||
- (NewErrorEntry->HardErrorCount !=
- OldErrorEntry->HardErrorCount) ||
- (NewErrorEntry->MiscErrorCount !=
- OldErrorEntry->MiscErrorCount))
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller, Channel, TargetID,
- NewErrorEntry->ParityErrorCount,
- NewErrorEntry->SoftErrorCount,
- NewErrorEntry->HardErrorCount,
- NewErrorEntry->MiscErrorCount);
- }
- memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
- sizeof(DAC960_V1_ErrorTable_T));
- }
- else if (CommandOpcode == DAC960_V1_GetDeviceState)
- {
- DAC960_V1_DeviceState_T *OldDeviceState =
- &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- DAC960_V1_DeviceState_T *NewDeviceState =
- Controller->V1.NewDeviceState;
- if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
- DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
- Controller->V1.DeviceStateChannel,
- Controller->V1.DeviceStateTargetID,
- (NewDeviceState->DeviceState
- == DAC960_V1_Device_Dead
- ? "DEAD"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "WRITE-ONLY"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "ONLINE" : "STANDBY"));
- if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
- NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
- {
- Controller->V1.NeedDeviceInquiryInformation = true;
- Controller->V1.NeedDeviceSerialNumberInformation = true;
- Controller->V1.DeviceResetCount
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID] = 0;
- }
- memcpy(OldDeviceState, NewDeviceState,
- sizeof(DAC960_V1_DeviceState_T));
- }
- else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
- &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
- if (NewLogicalDriveInformation->LogicalDriveState !=
- OldLogicalDriveInformation->LogicalDriveState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "ONLINE"
- : NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "CRITICAL" : "OFFLINE"));
- if (NewLogicalDriveInformation->WriteBack !=
- OldLogicalDriveInformation->WriteBack)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->WriteBack
- ? "WRITE BACK" : "WRITE THRU"));
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
- }
- else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
- Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
- CommandStatus = DAC960_V1_RebuildSuccessful;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Rebuild in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_RebuildFailed_LogicalDriveFailure:
- DAC960_Progress("Rebuild Failed due to "
- "Logical Drive Failure\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_BadBlocksOnOther:
- DAC960_Progress("Rebuild Failed due to "
- "Bad Blocks on Other Drives\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_NewDriveFailed:
- DAC960_Progress("Rebuild Failed due to "
- "Failure of Drive Being Rebuilt\n", Controller);
- break;
- case DAC960_V1_NoRebuildOrCheckInProgress:
- break;
- case DAC960_V1_RebuildSuccessful:
- DAC960_Progress("Rebuild Completed Successfully\n", Controller);
- break;
- case DAC960_V1_RebuildSuccessfullyTerminated:
- DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
- break;
- }
- Controller->V1.LastRebuildStatus = CommandStatus;
- if (CommandType != DAC960_MonitoringCommand &&
- Controller->V1.RebuildStatusPending)
- {
- Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
- Controller->V1.RebuildStatusPending = false;
- }
- else if (CommandType == DAC960_MonitoringCommand &&
- CommandStatus != DAC960_V1_NormalCompletion &&
- CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
- {
- Controller->V1.PendingRebuildStatus = CommandStatus;
- Controller->V1.RebuildStatusPending = true;
- }
- }
- else if (CommandOpcode == DAC960_V1_RebuildStat)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NormalCompletion)
- {
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Consistency Check in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- }
- }
- else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
- unsigned int BlocksCompleted =
- Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- switch (Controller->V1.BackgroundInitializationStatus->Status)
- {
- case DAC960_V1_BackgroundInitializationInvalid:
- break;
- case DAC960_V1_BackgroundInitializationStarted:
- DAC960_Progress("Background Initialization Started\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationInProgress:
- if (BlocksCompleted ==
- Controller->V1.LastBackgroundInitializationStatus.
- BlocksCompleted &&
- LogicalDriveNumber ==
- Controller->V1.LastBackgroundInitializationStatus.
- LogicalDriveNumber)
- break;
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Background Initialization in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_BackgroundInitializationSuspended:
- DAC960_Progress("Background Initialization Suspended\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationCancelled:
- DAC960_Progress("Background Initialization Cancelled\n",
- Controller);
- break;
- }
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- break;
- case DAC960_V1_BackgroundInitSuccessful:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization "
- "Completed Successfully\n", Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_BackgroundInitAborted:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization Aborted\n",
- Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_NoBackgroundInitInProgress:
- break;
- }
- }
- else if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- This is a bit ugly.
-
- The InquiryStandardData and
- the InquiryUntitSerialNumber information
- retrieval operations BOTH use the DAC960_V1_DCDB
- commands. the test above can't distinguish between
- these two cases.
-
- Instead, we rely on the order of code later in this
- function to ensure that DeviceInquiryInformation commands
- are submitted before DeviceSerialNumber commands.
- */
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryStandardData, 0,
- sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryStandardData,
- Controller->V1.NewInquiryStandardData,
- sizeof(DAC960_SCSI_Inquiry_T));
- Controller->V1.NeedDeviceInquiryInformation = false;
- }
- else if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryUnitSerialNumber,
- Controller->V1.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- Controller->V1.NeedDeviceSerialNumberInformation = false;
- }
- }
- /*
- Begin submitting new monitoring commands.
- */
- if (Controller->V1.NewEventLogSequenceNumber
- - Controller->V1.OldEventLogSequenceNumber > 0)
- {
- Command->V1.CommandMailbox.Type3E.CommandOpcode =
- DAC960_V1_PerformEventLogOperation;
- Command->V1.CommandMailbox.Type3E.OperationType =
- DAC960_V1_GetEventLogEntry;
- Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
- Command->V1.CommandMailbox.Type3E.SequenceNumber =
- Controller->V1.OldEventLogSequenceNumber;
- Command->V1.CommandMailbox.Type3E.BusAddress =
- Controller->V1.EventLogEntryDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedErrorTableInformation)
- {
- Controller->V1.NeedErrorTableInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetErrorTable;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewErrorTableDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress &&
- Controller->V1.RebuildProgressFirst)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceStateInformation)
- {
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
-
- dma_addr_t NewInquiryStandardDataDMA =
- Controller->V1.NewInquiryStandardDataDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- Controller->V1.NewInquiryUnitSerialNumberDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.StartDeviceStateScan)
- {
- Controller->V1.DeviceStateChannel = 0;
- Controller->V1.DeviceStateTargetID = 0;
- Controller->V1.StartDeviceStateScan = false;
- }
- else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
- {
- Controller->V1.DeviceStateChannel++;
- Controller->V1.DeviceStateTargetID = 0;
- }
- if (Controller->V1.DeviceStateChannel < Controller->Channels)
- {
- Controller->V1.NewDeviceState->DeviceState =
- DAC960_V1_Device_Dead;
- Command->V1.CommandMailbox.Type3D.CommandOpcode =
- DAC960_V1_GetDeviceState;
- Command->V1.CommandMailbox.Type3D.Channel =
- Controller->V1.DeviceStateChannel;
- Command->V1.CommandMailbox.Type3D.TargetID =
- Controller->V1.DeviceStateTargetID;
- Command->V1.CommandMailbox.Type3D.BusAddress =
- Controller->V1.NewDeviceStateDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->V1.NeedDeviceStateInformation = false;
- }
- if (Controller->V1.NeedLogicalDriveInformation)
- {
- Controller->V1.NeedLogicalDriveInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetLogicalDriveInformation;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewLogicalDriveInformationDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedConsistencyCheckProgress)
- {
- Controller->V1.NeedConsistencyCheckProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_RebuildStat;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedBackgroundInitializationStatus)
- {
- Controller->V1.NeedBackgroundInitializationStatus = false;
- Command->V1.CommandMailbox.Type3B.CommandOpcode =
- DAC960_V1_BackgroundInitializationControl;
- Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
- Command->V1.CommandMailbox.Type3B.BusAddress =
- Controller->V1.BackgroundInitializationStatusDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
- KernelCommand->CommandStatus = Command->V1.CommandStatus;
- Command->V1.KernelCommand = NULL;
- if (CommandOpcode == DAC960_V1_DCDB)
- Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
- [KernelCommand->DCDB->TargetID] =
- false;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V1_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-
-/*
- DAC960_V2_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- static const unsigned char *SenseErrors[] = {
- "NO SENSE", "RECOVERED ERROR",
- "NOT READY", "MEDIUM ERROR",
- "HARDWARE ERROR", "ILLEGAL REQUEST",
- "UNIT ATTENTION", "DATA PROTECT",
- "BLANK CHECK", "VENDOR-SPECIFIC",
- "COPY ABORTED", "ABORTED COMMAND",
- "EQUAL", "VOLUME OVERFLOW",
- "MISCOMPARE", "RESERVED"
- };
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- DAC960_Error("Error Condition %s on %s:\n", Controller,
- SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
- occurs.
-*/
-
-static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
- DAC960_V2_Event_T *Event)
-{
- DAC960_SCSI_RequestSense_T *RequestSense =
- (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
- unsigned char MessageBuffer[DAC960_LineBufferSize];
- static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
- { /* Physical Device Events (0x0000 - 0x007F) */
- { 0x0001, "P Online" },
- { 0x0002, "P Standby" },
- { 0x0005, "P Automatic Rebuild Started" },
- { 0x0006, "P Manual Rebuild Started" },
- { 0x0007, "P Rebuild Completed" },
- { 0x0008, "P Rebuild Cancelled" },
- { 0x0009, "P Rebuild Failed for Unknown Reasons" },
- { 0x000A, "P Rebuild Failed due to New Physical Device" },
- { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
- { 0x000C, "S Offline" },
- { 0x000D, "P Found" },
- { 0x000E, "P Removed" },
- { 0x000F, "P Unconfigured" },
- { 0x0010, "P Expand Capacity Started" },
- { 0x0011, "P Expand Capacity Completed" },
- { 0x0012, "P Expand Capacity Failed" },
- { 0x0013, "P Command Timed Out" },
- { 0x0014, "P Command Aborted" },
- { 0x0015, "P Command Retried" },
- { 0x0016, "P Parity Error" },
- { 0x0017, "P Soft Error" },
- { 0x0018, "P Miscellaneous Error" },
- { 0x0019, "P Reset" },
- { 0x001A, "P Active Spare Found" },
- { 0x001B, "P Warm Spare Found" },
- { 0x001C, "S Sense Data Received" },
- { 0x001D, "P Initialization Started" },
- { 0x001E, "P Initialization Completed" },
- { 0x001F, "P Initialization Failed" },
- { 0x0020, "P Initialization Cancelled" },
- { 0x0021, "P Failed because Write Recovery Failed" },
- { 0x0022, "P Failed because SCSI Bus Reset Failed" },
- { 0x0023, "P Failed because of Double Check Condition" },
- { 0x0024, "P Failed because Device Cannot Be Accessed" },
- { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
- { 0x0026, "P Failed because of Bad Tag from Device" },
- { 0x0027, "P Failed because of Command Timeout" },
- { 0x0028, "P Failed because of System Reset" },
- { 0x0029, "P Failed because of Busy Status or Parity Error" },
- { 0x002A, "P Failed because Host Set Device to Failed State" },
- { 0x002B, "P Failed because of Selection Timeout" },
- { 0x002C, "P Failed because of SCSI Bus Phase Error" },
- { 0x002D, "P Failed because Device Returned Unknown Status" },
- { 0x002E, "P Failed because Device Not Ready" },
- { 0x002F, "P Failed because Device Not Found at Startup" },
- { 0x0030, "P Failed because COD Write Operation Failed" },
- { 0x0031, "P Failed because BDT Write Operation Failed" },
- { 0x0039, "P Missing at Startup" },
- { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
- { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
- { 0x003D, "P Standby Rebuild Started" },
- /* Logical Device Events (0x0080 - 0x00FF) */
- { 0x0080, "M Consistency Check Started" },
- { 0x0081, "M Consistency Check Completed" },
- { 0x0082, "M Consistency Check Cancelled" },
- { 0x0083, "M Consistency Check Completed With Errors" },
- { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
- { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
- { 0x0086, "L Offline" },
- { 0x0087, "L Critical" },
- { 0x0088, "L Online" },
- { 0x0089, "M Automatic Rebuild Started" },
- { 0x008A, "M Manual Rebuild Started" },
- { 0x008B, "M Rebuild Completed" },
- { 0x008C, "M Rebuild Cancelled" },
- { 0x008D, "M Rebuild Failed for Unknown Reasons" },
- { 0x008E, "M Rebuild Failed due to New Physical Device" },
- { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
- { 0x0090, "M Initialization Started" },
- { 0x0091, "M Initialization Completed" },
- { 0x0092, "M Initialization Cancelled" },
- { 0x0093, "M Initialization Failed" },
- { 0x0094, "L Found" },
- { 0x0095, "L Deleted" },
- { 0x0096, "M Expand Capacity Started" },
- { 0x0097, "M Expand Capacity Completed" },
- { 0x0098, "M Expand Capacity Failed" },
- { 0x0099, "L Bad Block Found" },
- { 0x009A, "L Size Changed" },
- { 0x009B, "L Type Changed" },
- { 0x009C, "L Bad Data Block Found" },
- { 0x009E, "L Read of Data Block in BDT" },
- { 0x009F, "L Write Back Data for Disk Block Lost" },
- { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
- { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
- { 0x00A2, "L Standby Rebuild Started" },
- /* Fault Management Events (0x0100 - 0x017F) */
- { 0x0140, "E Fan %d Failed" },
- { 0x0141, "E Fan %d OK" },
- { 0x0142, "E Fan %d Not Present" },
- { 0x0143, "E Power Supply %d Failed" },
- { 0x0144, "E Power Supply %d OK" },
- { 0x0145, "E Power Supply %d Not Present" },
- { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
- { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
- { 0x0148, "E Temperature Sensor %d Temperature Normal" },
- { 0x0149, "E Temperature Sensor %d Not Present" },
- { 0x014A, "E Enclosure Management Unit %d Access Critical" },
- { 0x014B, "E Enclosure Management Unit %d Access OK" },
- { 0x014C, "E Enclosure Management Unit %d Access Offline" },
- /* Controller Events (0x0180 - 0x01FF) */
- { 0x0181, "C Cache Write Back Error" },
- { 0x0188, "C Battery Backup Unit Found" },
- { 0x0189, "C Battery Backup Unit Charge Level Low" },
- { 0x018A, "C Battery Backup Unit Charge Level OK" },
- { 0x0193, "C Installation Aborted" },
- { 0x0195, "C Battery Backup Unit Physically Removed" },
- { 0x0196, "C Memory Error During Warm Boot" },
- { 0x019E, "C Memory Soft ECC Error Corrected" },
- { 0x019F, "C Memory Hard ECC Error Corrected" },
- { 0x01A2, "C Battery Backup Unit Failed" },
- { 0x01AB, "C Mirror Race Recovery Failed" },
- { 0x01AC, "C Mirror Race on Critical Drive" },
- /* Controller Internal Processor Events */
- { 0x0380, "C Internal Controller Hung" },
- { 0x0381, "C Internal Controller Firmware Breakpoint" },
- { 0x0390, "C Internal Controller i960 Processor Specific Error" },
- { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
- { 0, "" } };
- int EventListIndex = 0, EventCode;
- unsigned char EventType, *EventMessage;
- if (Event->EventCode == 0x1C &&
- RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
- (RequestSense->AdditionalSenseCode == 0x80 ||
- RequestSense->AdditionalSenseCode == 0x81))
- Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
- RequestSense->AdditionalSenseCodeQualifier;
- while (true)
- {
- EventCode = EventList[EventListIndex].EventCode;
- if (EventCode == Event->EventCode || EventCode == 0) break;
- EventListIndex++;
- }
- EventType = EventList[EventListIndex].EventMessage[0];
- EventMessage = &EventList[EventListIndex].EventMessage[2];
- if (EventCode == 0)
- {
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- return;
- }
- switch (EventType)
- {
- case 'P':
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- break;
- case 'L':
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'M':
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'S':
- if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
- (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
- RequestSense->AdditionalSenseCode == 0x04 &&
- (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
- RequestSense->AdditionalSenseCodeQualifier == 0x02)))
- break;
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->SenseKey,
- RequestSense->AdditionalSenseCode,
- RequestSense->AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->Information[0],
- RequestSense->Information[1],
- RequestSense->Information[2],
- RequestSense->Information[3],
- RequestSense->CommandSpecificInformation[0],
- RequestSense->CommandSpecificInformation[1],
- RequestSense->CommandSpecificInformation[2],
- RequestSense->CommandSpecificInformation[3]);
- break;
- case 'E':
- if (Controller->SuppressEnclosureMessages) break;
- sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
- DAC960_Critical("Enclosure %d %s\n", Controller,
- Event->TargetID, MessageBuffer);
- break;
- case 'C':
- DAC960_Critical("Controller %s\n", Controller, EventMessage);
- break;
- default:
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- break;
- }
-}
-
-
-/*
- DAC960_V2_ReportProgress prints an appropriate progress message for
- Logical Device Long Operations.
-*/
-
-static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
- unsigned char *MessageString,
- unsigned int LogicalDeviceNumber,
- unsigned long BlocksCompleted,
- unsigned long LogicalDeviceSize)
-{
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n", Controller,
- MessageString,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
- Controller->EphemeralProgressMessage = false;
-}
-
-
-/*
- DAC960_V2_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode;
- DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode;
- DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V2_AbormalCompletion;
-#endif
- Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
-
- if (CommandStatus == DAC960_V2_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- /*
- Perform completion processing for all buffers in this I/O Request.
- */
- (void)DAC960_ProcessCompletedRequest(Command, false);
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- normal_completion = false;
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V2 error retry failure test\n");
- normal_completion = false;
- DAC960_V2_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (IOCTLOpcode == DAC960_V2_GetControllerInfo)
- {
- DAC960_V2_ControllerInfo_T *NewControllerInfo =
- Controller->V2.NewControllerInformation;
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- Controller->LogicalDriveCount =
- NewControllerInfo->LogicalDevicesPresent;
- Controller->V2.NeedLogicalDeviceInformation = true;
- Controller->V2.NeedPhysicalDeviceInformation = true;
- Controller->V2.StartLogicalDeviceInformationScan = true;
- Controller->V2.StartPhysicalDeviceInformationScan = true;
- Controller->MonitoringAlertMode =
- (NewControllerInfo->LogicalDevicesCritical > 0 ||
- NewControllerInfo->LogicalDevicesOffline > 0 ||
- NewControllerInfo->PhysicalDisksCritical > 0 ||
- NewControllerInfo->PhysicalDisksOffline > 0);
- memcpy(ControllerInfo, NewControllerInfo,
- sizeof(DAC960_V2_ControllerInfo_T));
- }
- else if (IOCTLOpcode == DAC960_V2_GetEvent)
- {
- if (CommandStatus == DAC960_V2_NormalCompletion) {
- DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
- }
- Controller->V2.NextEventSequenceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- unsigned int DeviceIndex;
- while (PhysicalDeviceInfo != NULL &&
- (NewPhysicalDeviceInfo->Channel >
- PhysicalDeviceInfo->Channel ||
- (NewPhysicalDeviceInfo->Channel ==
- PhysicalDeviceInfo->Channel &&
- (NewPhysicalDeviceInfo->TargetID >
- PhysicalDeviceInfo->TargetID ||
- (NewPhysicalDeviceInfo->TargetID ==
- PhysicalDeviceInfo->TargetID &&
- NewPhysicalDeviceInfo->LogicalUnit >
- PhysicalDeviceInfo->LogicalUnit)))))
- {
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- for (DeviceIndex = PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex++)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
- }
- Controller->V2.PhysicalDeviceInformation
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- }
- if (PhysicalDeviceInfo == NULL ||
- (NewPhysicalDeviceInfo->Channel !=
- PhysicalDeviceInfo->Channel) ||
- (NewPhysicalDeviceInfo->TargetID !=
- PhysicalDeviceInfo->TargetID) ||
- (NewPhysicalDeviceInfo->LogicalUnit !=
- PhysicalDeviceInfo->LogicalUnit))
- {
- PhysicalDeviceInfo =
- kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
- InquiryUnitSerialNumber =
- kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL ||
- PhysicalDeviceInfo == NULL)
- {
- kfree(InquiryUnitSerialNumber);
- InquiryUnitSerialNumber = NULL;
- kfree(PhysicalDeviceInfo);
- PhysicalDeviceInfo = NULL;
- }
- DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (PhysicalDeviceInfo != NULL)
- {
- memset(PhysicalDeviceInfo, 0,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- PhysicalDeviceInfo->PhysicalDeviceState =
- DAC960_V2_Device_InvalidState;
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex > PhysicalDeviceIndex;
- DeviceIndex--)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
- }
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- }
- }
- if (PhysicalDeviceInfo != NULL)
- {
- if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
- PhysicalDeviceInfo->PhysicalDeviceState)
- DAC960_Critical(
- "Physical Device %d:%d is now %s\n", Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "ONLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "REBUILD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "MISSING"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "CRITICAL"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "SUSPECTED-DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "COMMANDED-OFFLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "STANDBY" : "UNKNOWN"));
- if ((NewPhysicalDeviceInfo->ParityErrors !=
- PhysicalDeviceInfo->ParityErrors) ||
- (NewPhysicalDeviceInfo->SoftErrors !=
- PhysicalDeviceInfo->SoftErrors) ||
- (NewPhysicalDeviceInfo->HardErrors !=
- PhysicalDeviceInfo->HardErrors) ||
- (NewPhysicalDeviceInfo->MiscellaneousErrors !=
- PhysicalDeviceInfo->MiscellaneousErrors) ||
- (NewPhysicalDeviceInfo->CommandTimeouts !=
- PhysicalDeviceInfo->CommandTimeouts) ||
- (NewPhysicalDeviceInfo->Retries !=
- PhysicalDeviceInfo->Retries) ||
- (NewPhysicalDeviceInfo->Aborts !=
- PhysicalDeviceInfo->Aborts) ||
- (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
- PhysicalDeviceInfo->PredictedFailuresDetected))
- {
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->ParityErrors,
- NewPhysicalDeviceInfo->SoftErrors,
- NewPhysicalDeviceInfo->HardErrors,
- NewPhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Timeouts = %d, Retries = %d, "
- "Aborts = %d, Predicted = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->CommandTimeouts,
- NewPhysicalDeviceInfo->Retries,
- NewPhysicalDeviceInfo->Aborts,
- NewPhysicalDeviceInfo
- ->PredictedFailuresDetected);
- }
- if ((PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead ||
- PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_InvalidState) &&
- NewPhysicalDeviceInfo->PhysicalDeviceState
- != DAC960_V2_Device_Dead)
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- }
- NewPhysicalDeviceInfo->LogicalUnit++;
- Controller->V2.PhysicalDeviceIndex++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
- {
- unsigned int DeviceIndex;
- for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices;
- DeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- }
- Controller->V2.NeedPhysicalDeviceInformation = false;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- unsigned short LogicalDeviceNumber =
- NewLogicalDeviceInfo->LogicalDeviceNumber;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
- if (LogicalDeviceInfo == NULL)
- {
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists%s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (LogicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (LogicalDeviceInfo != NULL)
- {
- memset(LogicalDeviceInfo, 0,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- }
- if (LogicalDeviceInfo != NULL)
- {
- unsigned long LogicalDeviceSize =
- NewLogicalDeviceInfo->ConfigurableDeviceSize;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- LogicalDeviceInfo->LogicalDeviceState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "ONLINE"
- : NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "CRITICAL" : "OFFLINE"));
- if ((NewLogicalDeviceInfo->SoftErrors !=
- LogicalDeviceInfo->SoftErrors) ||
- (NewLogicalDeviceInfo->CommandsFailed !=
- LogicalDeviceInfo->CommandsFailed) ||
- (NewLogicalDeviceInfo->DeferredWriteErrors !=
- LogicalDeviceInfo->DeferredWriteErrors))
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
- "Soft = %d, Failed = %d, Deferred Write = %d\n",
- Controller, LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- NewLogicalDeviceInfo->SoftErrors,
- NewLogicalDeviceInfo->CommandsFailed,
- NewLogicalDeviceInfo->DeferredWriteErrors);
- if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Consistency Check",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ConsistencyCheckBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->RebuildInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Rebuild",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->RebuildBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Background Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->BackgroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Foreground Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ForegroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->DataMigrationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Data Migration",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->DataMigrationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Patrol Operation",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->PatrolOperationBlockNumber,
- LogicalDeviceSize);
- if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
- !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
- "Background Initialization %s\n",
- Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Completed" : "Failed"));
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- }
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDeviceNumber] = true;
- NewLogicalDeviceInfo->LogicalDeviceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL ||
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber])
- continue;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->V2.LogicalDeviceInformation
- [LogicalDriveNumber] = NULL;
- kfree(LogicalDeviceInfo);
- Controller->LogicalDriveInitiallyAccessible
- [LogicalDriveNumber] = false;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- Controller->V2.NeedLogicalDeviceInformation = false;
- }
- else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
-
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- memset(InquiryUnitSerialNumber,
- 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber,
- Controller->V2.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- Controller->V2.NeedDeviceSerialNumberInformation = false;
- }
-
- if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- - Controller->V2.NextEventSequenceNumber > 0)
- {
- CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
- CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
- Controller->V2.NextEventSequenceNumber >> 16;
- CommandMailbox->GetEvent.ControllerNumber = 0;
- CommandMailbox->GetEvent.IOCTL_Opcode =
- DAC960_V2_GetEvent;
- CommandMailbox->GetEvent.EventSequenceNumberLow16 =
- Controller->V2.NextEventSequenceNumber & 0xFFFF;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.EventDMA;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->GetEvent.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedPhysicalDeviceInformation)
- {
- if (Controller->V2.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Controller->V2.NewPhysicalDeviceInformation->Channel,
- Controller->V2.NewPhysicalDeviceInformation->TargetID,
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
-
-
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.StartPhysicalDeviceInformationScan)
- {
- Controller->V2.PhysicalDeviceIndex = 0;
- Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
- Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
- Controller->V2.StartPhysicalDeviceInformationScan = false;
- }
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
- Controller->V2.NewPhysicalDeviceInformation->TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
- Controller->V2.NewPhysicalDeviceInformation->Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedLogicalDeviceInformation)
- {
- if (Controller->V2.StartLogicalDeviceInformationScan)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber] = false;
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
- Controller->V2.StartLogicalDeviceInformationScan = false;
- }
- CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
- KernelCommand->CommandStatus = CommandStatus;
- KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
- KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
- Command->V2.KernelCommand = NULL;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V2_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-/*
- DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
- Controllers.
-
- Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
- on the data having been placed into DAC960_Controller_T, rather than
- an arbitrary buffer.
-*/
-
-static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- CommandMailbox->Common.CommandOpcode;
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- switch (CommandOpcode)
- {
- case DAC960_V1_Enquiry_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
- DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
- break;
- case DAC960_V1_GetDeviceState_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_GetDeviceState;
- DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
- break;
- case DAC960_V1_Read_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
- Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
- CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
- Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_MonitoringTimerFunction is the timer function for monitoring
- the status of DAC960 Controllers.
-*/
-
-static void DAC960_MonitoringTimerFunction(struct timer_list *t)
-{
- DAC960_Controller_T *Controller = from_timer(Controller, t, MonitoringTimer);
- DAC960_Command_T *Command;
- unsigned long flags;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V1_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- else
- {
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned int StatusChangeCounter =
- Controller->V2.HealthStatusBuffer->StatusChangeCounter;
- bool ForceMonitoringCommand = false;
- if (time_after(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL) continue;
- if (!LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized)
- {
- ForceMonitoringCommand = true;
- break;
- }
- }
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == Controller->V2.NextEventSequenceNumber &&
- (ControllerInfo->BackgroundInitializationsActive +
- ControllerInfo->LogicalDeviceInitializationsActive +
- ControllerInfo->PhysicalDeviceInitializationsActive +
- ControllerInfo->ConsistencyChecksActive +
- ControllerInfo->RebuildsActive +
- ControllerInfo->OnlineExpansionsActive == 0 ||
- time_before(jiffies, Controller->PrimaryMonitoringTime
- + DAC960_MonitoringTimerInterval)) &&
- !ForceMonitoringCommand)
- {
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- return;
- }
- Controller->V2.StatusChangeCounter = StatusChangeCounter;
- Controller->PrimaryMonitoringTime = jiffies;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V2_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- /*
- Wake up any processes waiting on a Health Status Buffer change.
- */
- wake_up(&Controller->HealthStatusWaitQueue);
- }
-}
-
-/*
- DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
- additional bytes in the Combined Status Buffer and grows the buffer if
- necessary. It returns true if there is enough room and false otherwise.
-*/
-
-static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
- unsigned int ByteCount)
-{
- unsigned char *NewStatusBuffer;
- if (Controller->InitialStatusLength + 1 +
- Controller->CurrentStatusLength + ByteCount + 1 <=
- Controller->CombinedStatusBufferLength)
- return true;
- if (Controller->CombinedStatusBufferLength == 0)
- {
- unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
- while (NewStatusBufferLength < ByteCount)
- NewStatusBufferLength *= 2;
- Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
- GFP_ATOMIC);
- if (Controller->CombinedStatusBuffer == NULL) return false;
- Controller->CombinedStatusBufferLength = NewStatusBufferLength;
- return true;
- }
- NewStatusBuffer = kmalloc_array(2, Controller->CombinedStatusBufferLength,
- GFP_ATOMIC);
- if (NewStatusBuffer == NULL)
- {
- DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
- Controller);
- return false;
- }
- memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
- Controller->CombinedStatusBufferLength);
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NewStatusBuffer;
- Controller->CombinedStatusBufferLength *= 2;
- Controller->CurrentStatusBuffer =
- &NewStatusBuffer[Controller->InitialStatusLength + 1];
- return true;
-}
-
-
-/*
- DAC960_Message prints Driver Messages.
-*/
-
-static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
- unsigned char *Format,
- DAC960_Controller_T *Controller,
- ...)
-{
- static unsigned char Buffer[DAC960_LineBufferSize];
- static bool BeginningOfLine = true;
- va_list Arguments;
- int Length = 0;
- va_start(Arguments, Controller);
- Length = vsprintf(Buffer, Format, Arguments);
- va_end(Arguments);
- if (Controller == NULL)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- DAC960_ControllerCount, Buffer);
- else if (MessageLevel == DAC960_AnnounceLevel ||
- MessageLevel == DAC960_InfoLevel)
- {
- if (!Controller->ControllerInitialized)
- {
- if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength],
- Buffer);
- Controller->InitialStatusLength += Length;
- Controller->CurrentStatusBuffer =
- &Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength + 1];
- }
- if (MessageLevel == DAC960_AnnounceLevel)
- {
- static int AnnouncementLines = 0;
- if (++AnnouncementLines <= 2)
- printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
- Buffer);
- }
- else
- {
- if (BeginningOfLine)
- {
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s",
- DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else printk("%s", Buffer);
- }
- }
- else if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CurrentStatusBuffer[
- Controller->CurrentStatusLength], Buffer);
- Controller->CurrentStatusLength += Length;
- }
- }
- else if (MessageLevel == DAC960_ProgressLevel)
- {
- strcpy(Controller->ProgressBuffer, Buffer);
- Controller->ProgressBufferLength = Length;
- if (Controller->EphemeralProgressMessage)
- {
- if (time_after_eq(jiffies, Controller->LastProgressReportTime
- + DAC960_ProgressReportingInterval))
- {
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- Controller->LastProgressReportTime = jiffies;
- }
- }
- else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else if (MessageLevel == DAC960_UserCriticalLevel)
- {
- strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
- Buffer);
- Controller->UserStatusLength += Length;
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else
- {
- if (BeginningOfLine)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- else printk("%s", Buffer);
- }
- BeginningOfLine = (Buffer[Length-1] == '\n');
-}
-
-
-/*
- DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
- Channel:TargetID specification from a User Command string. It updates
- Channel and TargetID and returns true on success and false on failure.
-*/
-
-static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *Channel,
- unsigned char *TargetID)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XChannel, XTargetID;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != ':' ||
- XChannel >= Controller->Channels)
- return false;
- UserCommandString = ++NewUserCommandString;
- XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XTargetID >= Controller->Targets)
- return false;
- *Channel = XChannel;
- *TargetID = XTargetID;
- return true;
-}
-
-
-/*
- DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
- specification from a User Command string. It updates LogicalDriveNumber and
- returns true on success and false on failure.
-*/
-
-static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *LogicalDriveNumber)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XLogicalDriveNumber;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XLogicalDriveNumber =
- simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
- return false;
- *LogicalDriveNumber = XLogicalDriveNumber;
- return true;
-}
-
-
-/*
- DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
- DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- DAC960_V1_PhysicalDeviceState_T
- DeviceState,
- const unsigned char *DeviceStateString)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.DeviceState = DeviceState;
- CommandMailbox->Type3D.Modifier = 0;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_UnableToStartDevice:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unable to Start Device\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_NoDeviceAtAddress:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "No Device at Address\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_InvalidChannelOrTargetOrModifier:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Invalid Channel or Target or Modifier\n",
- Controller, DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_ChannelBusy:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Channel Busy\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- DeviceStateString, Channel, TargetID,
- Command->V1.CommandStatus);
- break;
- }
-}
-
-
-/*
- DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
- Controllers.
-*/
-
-static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V1_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V1.CommandMailbox;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState != DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Dead, "Kill");
- else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Online, "Make Online");
- else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
-
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Standby, "Make Standby");
- else DAC960_UserCritical("Make Standby of Physical "
- "Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID))
- {
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_AttemptToRebuildOnlineDrive:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Attempt to Rebuild Online or "
- "Unresponsive Drive\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_NewDiskFailedDuringRebuild:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "New Disk Failed During Rebuild\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_InvalidDeviceAddress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Invalid Device Address\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Rebuild or Consistency Check Already "
- "in Progress\n", Controller, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- Channel, TargetID, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
- CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
- CommandMailbox->Type3C.AutoRestore = true;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Initiated\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_DependentDiskIsDead:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Dependent Physical Device is DEAD\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_InvalidOrNonredundantLogicalDrive:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Invalid or Nonredundant Logical Drive\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - Rebuild or "
- "Consistency Check Already in Progress\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- default:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Unexpected Status %04X\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
- strcmp(UserCommand, "cancel-consistency-check") == 0)
- {
- /*
- the OldRebuildRateConstant is never actually used
- once its value is retrieved from the controller.
- */
- unsigned char *OldRebuildRateConstant;
- dma_addr_t OldRebuildRateConstantDMA;
-
- OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
- sizeof(char), &OldRebuildRateConstantDMA);
- if (OldRebuildRateConstant == NULL) {
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Out of Memory",
- Controller);
- goto failure;
- }
- CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
- CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
- CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
- Controller);
- break;
- default:
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Unexpected Status %04X\n",
- Controller, Command->V1.CommandStatus);
- break;
- }
-failure:
- pci_free_consistent(Controller->PCIDevice, sizeof(char),
- OldRebuildRateConstant, OldRebuildRateConstantDMA);
- }
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-
-/*
- DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
- TargetID into a Logical Device. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned short
- *LogicalDeviceNumber)
-{
- DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
- DAC960_Controller_T *Controller = Command->Controller;
-
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(&SavedCommandMailbox, CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
-
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_TranslatePhysicalToLogicalDevice;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.PhysicalToLogicalDeviceDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
-
- DAC960_ExecuteCommand(Command);
- *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
-
- memcpy(CommandMailbox, &SavedCommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
- Controllers.
-*/
-
-static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
- unsigned short LogicalDeviceNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
- CommandMailbox->DeviceOperation.OperationDevice =
- DAC960_V2_RAID_Controller;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Dead;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Online;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Standby;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStart;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStart;
- CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
- CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strcmp(UserCommand, "perform-discovery") == 0)
- {
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Discovery %s\n", Controller,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
- {
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode =
- DAC960_V2_GetControllerInfo;
- /*
- * How does this NOT race with the queued Monitoring
- * usage of this structure?
- */
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- while (1) {
- DAC960_ExecuteCommand(Command);
- if (!Controller->V2.NewControllerInformation->PhysicalScanActive)
- break;
- msleep(1000);
- }
- DAC960_UserCritical("Discovery Completed\n", Controller);
- }
- }
- else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
- Controller->SuppressEnclosureMessages = true;
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-static int __maybe_unused dac960_proc_show(struct seq_file *m, void *v)
-{
- unsigned char *StatusMessage = "OK\n";
- int ControllerNumber;
- for (ControllerNumber = 0;
- ControllerNumber < DAC960_ControllerCount;
- ControllerNumber++)
- {
- DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) continue;
- if (Controller->MonitoringAlertMode)
- {
- StatusMessage = "ALERT\n";
- break;
- }
- }
- seq_puts(m, StatusMessage);
- return 0;
-}
-
-static int __maybe_unused dac960_initial_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
- seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
- return 0;
-}
-
-static int __maybe_unused dac960_current_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
- unsigned char *StatusMessage =
- "No Rebuild or Consistency Check in Progress\n";
- int ProgressMessageLength = strlen(StatusMessage);
- if (jiffies != Controller->LastCurrentStatusTime)
- {
- Controller->CurrentStatusLength = 0;
- DAC960_AnnounceDriver(Controller);
- DAC960_ReportControllerConfiguration(Controller);
- DAC960_ReportDeviceConfiguration(Controller);
- if (Controller->ProgressBufferLength > 0)
- ProgressMessageLength = Controller->ProgressBufferLength;
- if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
- {
- unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- if (Controller->ProgressBufferLength > 0)
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- Controller->ProgressBuffer);
- else
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- StatusMessage);
- Controller->CurrentStatusLength += ProgressMessageLength;
- }
- Controller->LastCurrentStatusTime = jiffies;
- }
- seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_show(struct seq_file *m, void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
-
- seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dac960_user_command_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t dac960_user_command_proc_write(struct file *file,
- const char __user *Buffer,
- size_t Count, loff_t *pos)
-{
- DAC960_Controller_T *Controller = PDE_DATA(file_inode(file));
- unsigned char CommandBuffer[80];
- int Length;
- if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
- if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
- CommandBuffer[Count] = '\0';
- Length = strlen(CommandBuffer);
- if (Length > 0 && CommandBuffer[Length-1] == '\n')
- CommandBuffer[--Length] = '\0';
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
- else
- return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
-}
-
-static const struct file_operations dac960_user_command_proc_fops = {
- .owner = THIS_MODULE,
- .open = dac960_user_command_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dac960_user_command_proc_write,
-};
-
-/*
- DAC960_CreateProcEntries creates the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
-{
- struct proc_dir_entry *ControllerProcEntry;
-
- if (DAC960_ProcDirectoryEntry == NULL) {
- DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
- proc_create_single("status", 0, DAC960_ProcDirectoryEntry,
- dac960_proc_show);
- }
-
- snprintf(Controller->ControllerName, sizeof(Controller->ControllerName),
- "c%d", Controller->ControllerNumber);
- ControllerProcEntry = proc_mkdir(Controller->ControllerName,
- DAC960_ProcDirectoryEntry);
- proc_create_single_data("initial_status", 0, ControllerProcEntry,
- dac960_initial_status_proc_show, Controller);
- proc_create_single_data("current_status", 0, ControllerProcEntry,
- dac960_current_status_proc_show, Controller);
- proc_create_data("user_command", 0600, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
- Controller->ControllerProcEntry = ControllerProcEntry;
-}
-
-
-/*
- DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerProcEntry == NULL)
- return;
- remove_proc_entry("initial_status", Controller->ControllerProcEntry);
- remove_proc_entry("current_status", Controller->ControllerProcEntry);
- remove_proc_entry("user_command", Controller->ControllerProcEntry);
- remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
- Controller->ControllerProcEntry = NULL;
-}
-
-#ifdef DAC960_GAM_MINOR
-
-static long DAC960_gam_get_controller_info(DAC960_ControllerInfo_T __user *UserSpaceControllerInfo)
-{
- DAC960_ControllerInfo_T ControllerInfo;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceControllerInfo == NULL)
- ErrorCode = -EINVAL;
- else ErrorCode = get_user(ControllerNumber,
- &UserSpaceControllerInfo->ControllerNumber);
- if (ErrorCode != 0)
- goto out;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1) {
- goto out;
- }
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
- ControllerInfo.ControllerNumber = ControllerNumber;
- ControllerInfo.FirmwareType = Controller->FirmwareType;
- ControllerInfo.Channels = Controller->Channels;
- ControllerInfo.Targets = Controller->Targets;
- ControllerInfo.PCI_Bus = Controller->Bus;
- ControllerInfo.PCI_Device = Controller->Device;
- ControllerInfo.PCI_Function = Controller->Function;
- ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
- ControllerInfo.PCI_Address = Controller->PCI_Address;
- strcpy(ControllerInfo.ModelName, Controller->ModelName);
- strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
- ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
- sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v1_execute_command(DAC960_V1_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V1_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V1_CommandOpcode_T CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_DCDB_T DCDB;
- DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
- dma_addr_t DCDB_IOBUFDMA;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- long ErrorCode;
-
- if (UserSpaceUserCommand == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V1_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ControllerNumber = UserCommand.ControllerNumber;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- ErrorCode = -EINVAL;
- if (Controller->FirmwareType != DAC960_V1_Controller)
- goto out;
- CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
- DataTransferLength = UserCommand.DataTransferLength;
- if (CommandOpcode & 0x80)
- goto out;
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- if (copy_from_user(&DCDB, UserCommand.DCDB,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- if (DCDB.Channel >= DAC960_V1_MaxChannels)
- goto out;
- if (!((DataTransferLength == 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_NoDataTransfer) ||
- (DataTransferLength > 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
- (DataTransferLength < 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferSystemToDevice)))
- goto out;
- if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
- != abs(DataTransferLength))
- goto out;
- DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
- sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
- if (DCDB_IOBUF == NULL) {
- ErrorCode = -ENOMEM;
- goto out;
- }
- }
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto out;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- while (Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID])
- {
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue,
- !Controller->V1.DirectCommandActive
- [DCDB.Channel][DCDB.TargetID]);
- spin_lock_irq(&Controller->queue_lock);
- }
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
- DCDB.BusAddress = DataTransferBufferDMA;
- memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
- }
- else
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- if (DataTransferBuffer != NULL)
- Command->V1.CommandMailbox.Type3.BusAddress =
- DataTransferBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- I don't believe Target or Channel in the DCDB_IOBUF
- should be any different from the contents of DCDB.
- */
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = false;
- if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- ErrorCode = CommandStatus;
- Failure1:
- if (DataTransferBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (DCDB_IOBUF != NULL)
- pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
- DCDB_IOBUF, DCDB_IOBUFDMA);
- out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_execute_command(DAC960_V2_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V2_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- int DataTransferResidue, RequestSenseLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- unsigned char *RequestSenseBuffer = NULL;
- dma_addr_t RequestSenseBufferDMA;
- long ErrorCode = -EINVAL;
-
- if (UserSpaceUserCommand == NULL)
- goto out;
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V2_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = UserCommand.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller){
- ErrorCode = -EINVAL;
- goto out;
- }
- DataTransferLength = UserCommand.DataTransferLength;
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (RequestSenseLength > 0)
- {
- RequestSenseBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- RequestSenseLength,
- &RequestSenseBufferDMA);
- if (RequestSenseBuffer == NULL)
- {
- ErrorCode = -ENOMEM;
- goto Failure2;
- }
- }
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->Common.CommandControlBits
- .AdditionalScatterGatherListMemory = false;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = 0;
- CommandMailbox->Common.DataTransferPageNumber = 0;
- memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
- sizeof(DAC960_V2_DataTransferMemoryAddress_T));
- if (DataTransferLength != 0)
- {
- if (DataTransferLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.DataTransferSize = DataTransferLength;
- }
- else
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = false;
- CommandMailbox->Common.DataTransferSize = -DataTransferLength;
- }
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer = DataTransferBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- }
- if (RequestSenseLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = false;
- CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
- CommandMailbox->Common.RequestSenseBusAddress =
- RequestSenseBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- RequestSenseLength = Command->V2.RequestSenseLength;
- DataTransferResidue = Command->V2.DataTransferResidue;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (RequestSenseLength > UserCommand.RequestSenseLength)
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
- &DataTransferResidue,
- sizeof(DataTransferResidue))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
- &RequestSenseLength, sizeof(RequestSenseLength))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- if (RequestSenseLength > 0)
- {
- if (copy_to_user(UserCommand.RequestSenseBuffer,
- RequestSenseBuffer, RequestSenseLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- ErrorCode = CommandStatus;
- Failure2:
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (RequestSenseBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
- RequestSenseBuffer, RequestSenseBufferDMA);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_get_health_status(DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus)
-{
- DAC960_V2_GetHealthStatus_T GetHealthStatus;
- DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceGetHealthStatus == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
- sizeof(DAC960_V2_GetHealthStatus_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = GetHealthStatus.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&HealthStatusBuffer,
- GetHealthStatus.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = wait_event_interruptible_timeout(Controller->HealthStatusWaitQueue,
- !(Controller->V2.HealthStatusBuffer->StatusChangeCounter
- == HealthStatusBuffer.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == HealthStatusBuffer.NextEventSequenceNumber),
- DAC960_MonitoringTimerInterval);
- if (ErrorCode == -ERESTARTSYS) {
- ErrorCode = -EINTR;
- goto out;
- }
- if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
- Controller->V2.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T)))
- ErrorCode = -EFAULT;
- else
- ErrorCode = 0;
-
-out:
- return ErrorCode;
-}
-
-/*
- * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
-*/
-
-static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
- unsigned long Argument)
-{
- long ErrorCode = 0;
- void __user *argp = (void __user *)Argument;
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-
- mutex_lock(&DAC960_mutex);
- switch (Request)
- {
- case DAC960_IOCTL_GET_CONTROLLER_COUNT:
- ErrorCode = DAC960_ControllerCount;
- break;
- case DAC960_IOCTL_GET_CONTROLLER_INFO:
- ErrorCode = DAC960_gam_get_controller_info(argp);
- break;
- case DAC960_IOCTL_V1_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v1_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v2_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
- ErrorCode = DAC960_gam_v2_get_health_status(argp);
- break;
- default:
- ErrorCode = -ENOTTY;
- }
- mutex_unlock(&DAC960_mutex);
- return ErrorCode;
-}
-
-static const struct file_operations DAC960_gam_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = DAC960_gam_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice DAC960_gam_dev = {
- DAC960_GAM_MINOR,
- "dac960_gam",
- &DAC960_gam_fops
-};
-
-static int DAC960_gam_init(void)
-{
- int ret;
-
- ret = misc_register(&DAC960_gam_dev);
- if (ret)
- printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
- return ret;
-}
-
-static void DAC960_gam_cleanup(void)
-{
- misc_deregister(&DAC960_gam_dev);
-}
-
-#endif /* DAC960_GAM_MINOR */
-
-static struct DAC960_privdata DAC960_GEM_privdata = {
- .HardwareType = DAC960_GEM_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_GEM_InterruptHandler,
- .MemoryWindowSize = DAC960_GEM_RegisterWindowSize,
-};
-
-
-static struct DAC960_privdata DAC960_BA_privdata = {
- .HardwareType = DAC960_BA_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_BA_InterruptHandler,
- .MemoryWindowSize = DAC960_BA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LP_privdata = {
- .HardwareType = DAC960_LP_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_LP_InterruptHandler,
- .MemoryWindowSize = DAC960_LP_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LA_privdata = {
- .HardwareType = DAC960_LA_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_LA_InterruptHandler,
- .MemoryWindowSize = DAC960_LA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PG_privdata = {
- .HardwareType = DAC960_PG_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PG_InterruptHandler,
- .MemoryWindowSize = DAC960_PG_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PD_privdata = {
- .HardwareType = DAC960_PD_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PD_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_P_privdata = {
- .HardwareType = DAC960_P_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_P_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static const struct pci_device_id DAC960_id_table[] = {
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_GEM_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_BA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_BA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_LP,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_LP_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_DEC,
- .device = PCI_DEVICE_ID_DEC_21285,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_DEVICE_ID_MYLEX_DAC960_LA,
- .driver_data = (unsigned long) &DAC960_LA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PG,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PG_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PD_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_P_privdata,
- },
- {0, },
-};
-
-MODULE_DEVICE_TABLE(pci, DAC960_id_table);
-
-static struct pci_driver DAC960_pci_driver = {
- .name = "DAC960",
- .id_table = DAC960_id_table,
- .probe = DAC960_Probe,
- .remove = DAC960_Remove,
-};
-
-static int __init DAC960_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&DAC960_pci_driver);
-#ifdef DAC960_GAM_MINOR
- if (!ret)
- DAC960_gam_init();
-#endif
- return ret;
-}
-
-static void __exit DAC960_cleanup_module(void)
-{
- int i;
-
-#ifdef DAC960_GAM_MINOR
- DAC960_gam_cleanup();
-#endif
-
- for (i = 0; i < DAC960_ControllerCount; i++) {
- DAC960_Controller_T *Controller = DAC960_Controllers[i];
- if (Controller == NULL)
- continue;
- DAC960_FinalizeController(Controller);
- }
- if (DAC960_ProcDirectoryEntry != NULL) {
- remove_proc_entry("rd/status", NULL);
- remove_proc_entry("rd", NULL);
- }
- DAC960_ControllerCount = 0;
- pci_unregister_driver(&DAC960_pci_driver);
-}
-
-module_init(DAC960_init_module);
-module_exit(DAC960_cleanup_module);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h
deleted file mode 100644
index 1439e651928b..000000000000
--- a/drivers/block/DAC960.h
+++ /dev/null
@@ -1,4414 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
- The author respectfully requests that any modifications to this software be
- sent directly to him for evaluation and testing.
-
-*/
-
-
-/*
- Define the maximum number of DAC960 Controllers supported by this driver.
-*/
-
-#define DAC960_MaxControllers 8
-
-
-/*
- Define the maximum number of Controller Channels supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxChannels 3
-#define DAC960_V2_MaxChannels 4
-
-
-/*
- Define the maximum number of Targets per Channel supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxTargets 16
-#define DAC960_V2_MaxTargets 128
-
-
-/*
- Define the maximum number of Logical Drives supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxLogicalDrives 32
-
-
-/*
- Define the maximum number of Physical Devices supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxPhysicalDevices 45
-#define DAC960_V2_MaxPhysicalDevices 272
-
-/*
- Define a 32/64 bit I/O Address data type.
-*/
-
-typedef unsigned long DAC960_IO_Address_T;
-
-
-/*
- Define a 32/64 bit PCI Bus Address data type.
-*/
-
-typedef unsigned long DAC960_PCI_Address_T;
-
-
-/*
- Define a 32 bit Bus Address data type.
-*/
-
-typedef unsigned int DAC960_BusAddress32_T;
-
-
-/*
- Define a 64 bit Bus Address data type.
-*/
-
-typedef unsigned long long DAC960_BusAddress64_T;
-
-
-/*
- Define a 32 bit Byte Count data type.
-*/
-
-typedef unsigned int DAC960_ByteCount32_T;
-
-
-/*
- Define a 64 bit Byte Count data type.
-*/
-
-typedef unsigned long long DAC960_ByteCount64_T;
-
-
-/*
- dma_loaf is used by helper routines to divide a region of
- dma mapped memory into smaller pieces, where those pieces
- are not of uniform size.
- */
-
-struct dma_loaf {
- void *cpu_base;
- dma_addr_t dma_base;
- size_t length;
- void *cpu_free;
- dma_addr_t dma_free;
-};
-
-/*
- Define the SCSI INQUIRY Standard Data structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
- bool RMB:1; /* Byte 1 Bit 7 */
- unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
- unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
- unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
- unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
- unsigned char :2; /* Byte 3 Bits 4-5 */
- bool TrmIOP:1; /* Byte 3 Bit 6 */
- bool AENC:1; /* Byte 3 Bit 7 */
- unsigned char AdditionalLength; /* Byte 4 */
- unsigned char :8; /* Byte 5 */
- unsigned char :8; /* Byte 6 */
- bool SftRe:1; /* Byte 7 Bit 0 */
- bool CmdQue:1; /* Byte 7 Bit 1 */
- bool :1; /* Byte 7 Bit 2 */
- bool Linked:1; /* Byte 7 Bit 3 */
- bool Sync:1; /* Byte 7 Bit 4 */
- bool WBus16:1; /* Byte 7 Bit 5 */
- bool WBus32:1; /* Byte 7 Bit 6 */
- bool RelAdr:1; /* Byte 7 Bit 7 */
- unsigned char VendorIdentification[8]; /* Bytes 8-15 */
- unsigned char ProductIdentification[16]; /* Bytes 16-31 */
- unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
-}
-DAC960_SCSI_Inquiry_T;
-
-
-/*
- Define the SCSI INQUIRY Unit Serial Number structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry_UnitSerialNumber
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char PageCode; /* Byte 1 */
- unsigned char :8; /* Byte 2 */
- unsigned char PageLength; /* Byte 3 */
- unsigned char ProductSerialNumber[28]; /* Bytes 4-31 */
-}
-DAC960_SCSI_Inquiry_UnitSerialNumber_T;
-
-
-/*
- Define the SCSI REQUEST SENSE Sense Key type.
-*/
-
-typedef enum
-{
- DAC960_SenseKey_NoSense = 0x0,
- DAC960_SenseKey_RecoveredError = 0x1,
- DAC960_SenseKey_NotReady = 0x2,
- DAC960_SenseKey_MediumError = 0x3,
- DAC960_SenseKey_HardwareError = 0x4,
- DAC960_SenseKey_IllegalRequest = 0x5,
- DAC960_SenseKey_UnitAttention = 0x6,
- DAC960_SenseKey_DataProtect = 0x7,
- DAC960_SenseKey_BlankCheck = 0x8,
- DAC960_SenseKey_VendorSpecific = 0x9,
- DAC960_SenseKey_CopyAborted = 0xA,
- DAC960_SenseKey_AbortedCommand = 0xB,
- DAC960_SenseKey_Equal = 0xC,
- DAC960_SenseKey_VolumeOverflow = 0xD,
- DAC960_SenseKey_Miscompare = 0xE,
- DAC960_SenseKey_Reserved = 0xF
-}
-__attribute__ ((packed))
-DAC960_SCSI_RequestSenseKey_T;
-
-
-/*
- Define the SCSI REQUEST SENSE structure.
-*/
-
-typedef struct DAC960_SCSI_RequestSense
-{
- unsigned char ErrorCode:7; /* Byte 0 Bits 0-6 */
- bool Valid:1; /* Byte 0 Bit 7 */
- unsigned char SegmentNumber; /* Byte 1 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 2 Bits 0-3 */
- unsigned char :1; /* Byte 2 Bit 4 */
- bool ILI:1; /* Byte 2 Bit 5 */
- bool EOM:1; /* Byte 2 Bit 6 */
- bool Filemark:1; /* Byte 2 Bit 7 */
- unsigned char Information[4]; /* Bytes 3-6 */
- unsigned char AdditionalSenseLength; /* Byte 7 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 8-11 */
- unsigned char AdditionalSenseCode; /* Byte 12 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 13 */
-}
-DAC960_SCSI_RequestSense_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- /* I/O Commands */
- DAC960_V1_ReadExtended = 0x33,
- DAC960_V1_WriteExtended = 0x34,
- DAC960_V1_ReadAheadExtended = 0x35,
- DAC960_V1_ReadExtendedWithScatterGather = 0xB3,
- DAC960_V1_WriteExtendedWithScatterGather = 0xB4,
- DAC960_V1_Read = 0x36,
- DAC960_V1_ReadWithScatterGather = 0xB6,
- DAC960_V1_Write = 0x37,
- DAC960_V1_WriteWithScatterGather = 0xB7,
- DAC960_V1_DCDB = 0x04,
- DAC960_V1_DCDBWithScatterGather = 0x84,
- DAC960_V1_Flush = 0x0A,
- /* Controller Status Related Commands */
- DAC960_V1_Enquiry = 0x53,
- DAC960_V1_Enquiry2 = 0x1C,
- DAC960_V1_GetLogicalDriveElement = 0x55,
- DAC960_V1_GetLogicalDriveInformation = 0x19,
- DAC960_V1_IOPortRead = 0x39,
- DAC960_V1_IOPortWrite = 0x3A,
- DAC960_V1_GetSDStats = 0x3E,
- DAC960_V1_GetPDStats = 0x3F,
- DAC960_V1_PerformEventLogOperation = 0x72,
- /* Device Related Commands */
- DAC960_V1_StartDevice = 0x10,
- DAC960_V1_GetDeviceState = 0x50,
- DAC960_V1_StopChannel = 0x13,
- DAC960_V1_StartChannel = 0x12,
- DAC960_V1_ResetChannel = 0x1A,
- /* Commands Associated with Data Consistency and Errors */
- DAC960_V1_Rebuild = 0x09,
- DAC960_V1_RebuildAsync = 0x16,
- DAC960_V1_CheckConsistency = 0x0F,
- DAC960_V1_CheckConsistencyAsync = 0x1E,
- DAC960_V1_RebuildStat = 0x0C,
- DAC960_V1_GetRebuildProgress = 0x27,
- DAC960_V1_RebuildControl = 0x1F,
- DAC960_V1_ReadBadBlockTable = 0x0B,
- DAC960_V1_ReadBadDataTable = 0x25,
- DAC960_V1_ClearBadDataTable = 0x26,
- DAC960_V1_GetErrorTable = 0x17,
- DAC960_V1_AddCapacityAsync = 0x2A,
- DAC960_V1_BackgroundInitializationControl = 0x2B,
- /* Configuration Related Commands */
- DAC960_V1_ReadConfig2 = 0x3D,
- DAC960_V1_WriteConfig2 = 0x3C,
- DAC960_V1_ReadConfigurationOnDisk = 0x4A,
- DAC960_V1_WriteConfigurationOnDisk = 0x4B,
- DAC960_V1_ReadConfiguration = 0x4E,
- DAC960_V1_ReadBackupConfiguration = 0x4D,
- DAC960_V1_WriteConfiguration = 0x4F,
- DAC960_V1_AddConfiguration = 0x4C,
- DAC960_V1_ReadConfigurationLabel = 0x48,
- DAC960_V1_WriteConfigurationLabel = 0x49,
- /* Firmware Upgrade Related Commands */
- DAC960_V1_LoadImage = 0x20,
- DAC960_V1_StoreImage = 0x21,
- DAC960_V1_ProgramImage = 0x22,
- /* Diagnostic Commands */
- DAC960_V1_SetDiagnosticMode = 0x31,
- DAC960_V1_RunDiagnostic = 0x32,
- /* Subsystem Service Commands */
- DAC960_V1_GetSubsystemData = 0x70,
- DAC960_V1_SetSubsystemParameters = 0x71,
- /* Version 2.xx Firmware Commands */
- DAC960_V1_Enquiry_Old = 0x05,
- DAC960_V1_GetDeviceState_Old = 0x14,
- DAC960_V1_Read_Old = 0x02,
- DAC960_V1_Write_Old = 0x03,
- DAC960_V1_ReadWithScatterGather_Old = 0x82,
- DAC960_V1_WriteWithScatterGather_Old = 0x83
-}
-__attribute__ ((packed))
-DAC960_V1_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Identifier type.
-*/
-
-typedef unsigned char DAC960_V1_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Status Codes.
-*/
-
-#define DAC960_V1_NormalCompletion 0x0000 /* Common */
-#define DAC960_V1_CheckConditionReceived 0x0002 /* Common */
-#define DAC960_V1_NoDeviceAtAddress 0x0102 /* Common */
-#define DAC960_V1_InvalidDeviceAddress 0x0105 /* Common */
-#define DAC960_V1_InvalidParameter 0x0105 /* Common */
-#define DAC960_V1_IrrecoverableDataError 0x0001 /* I/O */
-#define DAC960_V1_LogicalDriveNonexistentOrOffline 0x0002 /* I/O */
-#define DAC960_V1_AccessBeyondEndOfLogicalDrive 0x0105 /* I/O */
-#define DAC960_V1_BadDataEncountered 0x010C /* I/O */
-#define DAC960_V1_DeviceBusy 0x0008 /* DCDB */
-#define DAC960_V1_DeviceNonresponsive 0x000E /* DCDB */
-#define DAC960_V1_CommandTerminatedAbnormally 0x000F /* DCDB */
-#define DAC960_V1_UnableToStartDevice 0x0002 /* Device */
-#define DAC960_V1_InvalidChannelOrTargetOrModifier 0x0105 /* Device */
-#define DAC960_V1_ChannelBusy 0x0106 /* Device */
-#define DAC960_V1_ChannelNotStopped 0x0002 /* Device */
-#define DAC960_V1_AttemptToRebuildOnlineDrive 0x0002 /* Consistency */
-#define DAC960_V1_RebuildBadBlocksEncountered 0x0003 /* Consistency */
-#define DAC960_V1_NewDiskFailedDuringRebuild 0x0004 /* Consistency */
-#define DAC960_V1_RebuildOrCheckAlreadyInProgress 0x0106 /* Consistency */
-#define DAC960_V1_DependentDiskIsDead 0x0002 /* Consistency */
-#define DAC960_V1_InconsistentBlocksFound 0x0003 /* Consistency */
-#define DAC960_V1_InvalidOrNonredundantLogicalDrive 0x0105 /* Consistency */
-#define DAC960_V1_NoRebuildOrCheckInProgress 0x0105 /* Consistency */
-#define DAC960_V1_RebuildInProgress_DataValid 0x0000 /* Consistency */
-#define DAC960_V1_RebuildFailed_LogicalDriveFailure 0x0002 /* Consistency */
-#define DAC960_V1_RebuildFailed_BadBlocksOnOther 0x0003 /* Consistency */
-#define DAC960_V1_RebuildFailed_NewDriveFailed 0x0004 /* Consistency */
-#define DAC960_V1_RebuildSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_RebuildSuccessfullyTerminated 0x0107 /* Consistency */
-#define DAC960_V1_BackgroundInitSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_BackgroundInitAborted 0x0005 /* Consistency */
-#define DAC960_V1_NoBackgroundInitInProgress 0x0105 /* Consistency */
-#define DAC960_V1_AddCapacityInProgress 0x0004 /* Consistency */
-#define DAC960_V1_AddCapacityFailedOrSuspended 0x00F4 /* Consistency */
-#define DAC960_V1_Config2ChecksumError 0x0002 /* Configuration */
-#define DAC960_V1_ConfigurationSuspended 0x0106 /* Configuration */
-#define DAC960_V1_FailedToConfigureNVRAM 0x0105 /* Configuration */
-#define DAC960_V1_ConfigurationNotSavedStateChange 0x0106 /* Configuration */
-#define DAC960_V1_SubsystemNotInstalled 0x0001 /* Subsystem */
-#define DAC960_V1_SubsystemFailed 0x0002 /* Subsystem */
-#define DAC960_V1_SubsystemBusy 0x0106 /* Subsystem */
-
-typedef unsigned short DAC960_V1_CommandStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry
-{
- unsigned char NumberOfLogicalDrives; /* Byte 0 */
- unsigned int :24; /* Bytes 1-3 */
- unsigned int LogicalDriveSizes[32]; /* Bytes 4-131 */
- unsigned short FlashAge; /* Bytes 132-133 */
- struct {
- bool DeferredWriteError:1; /* Byte 134 Bit 0 */
- bool BatteryLow:1; /* Byte 134 Bit 1 */
- unsigned char :6; /* Byte 134 Bits 2-7 */
- } StatusFlags;
- unsigned char :8; /* Byte 135 */
- unsigned char MinorFirmwareVersion; /* Byte 136 */
- unsigned char MajorFirmwareVersion; /* Byte 137 */
- enum {
- DAC960_V1_NoStandbyRebuildOrCheckInProgress = 0x00,
- DAC960_V1_StandbyRebuildInProgress = 0x01,
- DAC960_V1_BackgroundRebuildInProgress = 0x02,
- DAC960_V1_BackgroundCheckInProgress = 0x03,
- DAC960_V1_StandbyRebuildCompletedWithError = 0xFF,
- DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed = 0xF0,
- DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed = 0xF1,
- DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses = 0xF2,
- DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated = 0xF3
- } __attribute__ ((packed)) RebuildFlag; /* Byte 138 */
- unsigned char MaxCommands; /* Byte 139 */
- unsigned char OfflineLogicalDriveCount; /* Byte 140 */
- unsigned char :8; /* Byte 141 */
- unsigned short EventLogSequenceNumber; /* Bytes 142-143 */
- unsigned char CriticalLogicalDriveCount; /* Byte 144 */
- unsigned int :24; /* Bytes 145-147 */
- unsigned char DeadDriveCount; /* Byte 148 */
- unsigned char :8; /* Byte 149 */
- unsigned char RebuildCount; /* Byte 150 */
- struct {
- unsigned char :3; /* Byte 151 Bits 0-2 */
- bool BatteryBackupUnitPresent:1; /* Byte 151 Bit 3 */
- unsigned char :3; /* Byte 151 Bits 4-6 */
- unsigned char :1; /* Byte 151 Bit 7 */
- } MiscFlags;
- struct {
- unsigned char TargetID;
- unsigned char Channel;
- } DeadDrives[21]; /* Bytes 152-194 */
- unsigned char Reserved[62]; /* Bytes 195-255 */
-}
-__attribute__ ((packed))
-DAC960_V1_Enquiry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry2
-{
- struct {
- enum {
- DAC960_V1_P_PD_PU = 0x01,
- DAC960_V1_PL = 0x02,
- DAC960_V1_PG = 0x10,
- DAC960_V1_PJ = 0x11,
- DAC960_V1_PR = 0x12,
- DAC960_V1_PT = 0x13,
- DAC960_V1_PTL0 = 0x14,
- DAC960_V1_PRL = 0x15,
- DAC960_V1_PTL1 = 0x16,
- DAC960_V1_1164P = 0x20
- } __attribute__ ((packed)) SubModel; /* Byte 0 */
- unsigned char ActualChannels; /* Byte 1 */
- enum {
- DAC960_V1_FiveChannelBoard = 0x01,
- DAC960_V1_ThreeChannelBoard = 0x02,
- DAC960_V1_TwoChannelBoard = 0x03,
- DAC960_V1_ThreeChannelASIC_DAC = 0x04
- } __attribute__ ((packed)) Model; /* Byte 2 */
- enum {
- DAC960_V1_EISA_Controller = 0x01,
- DAC960_V1_MicroChannel_Controller = 0x02,
- DAC960_V1_PCI_Controller = 0x03,
- DAC960_V1_SCSItoSCSI_Controller = 0x08
- } __attribute__ ((packed)) ProductFamily; /* Byte 3 */
- } HardwareID; /* Bytes 0-3 */
- /* MajorVersion.MinorVersion-FirmwareType-TurnID */
- struct {
- unsigned char MajorVersion; /* Byte 4 */
- unsigned char MinorVersion; /* Byte 5 */
- unsigned char TurnID; /* Byte 6 */
- char FirmwareType; /* Byte 7 */
- } FirmwareID; /* Bytes 4-7 */
- unsigned char :8; /* Byte 8 */
- unsigned int :24; /* Bytes 9-11 */
- unsigned char ConfiguredChannels; /* Byte 12 */
- unsigned char ActualChannels; /* Byte 13 */
- unsigned char MaxTargets; /* Byte 14 */
- unsigned char MaxTags; /* Byte 15 */
- unsigned char MaxLogicalDrives; /* Byte 16 */
- unsigned char MaxArms; /* Byte 17 */
- unsigned char MaxSpans; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int MemorySize; /* Bytes 24-27 */
- unsigned int CacheSize; /* Bytes 28-31 */
- unsigned int FlashMemorySize; /* Bytes 32-35 */
- unsigned int NonVolatileMemorySize; /* Bytes 36-39 */
- struct {
- enum {
- DAC960_V1_RamType_DRAM = 0x0,
- DAC960_V1_RamType_EDO = 0x1,
- DAC960_V1_RamType_SDRAM = 0x2,
- DAC960_V1_RamType_Last = 0x7
- } __attribute__ ((packed)) RamType:3; /* Byte 40 Bits 0-2 */
- enum {
- DAC960_V1_ErrorCorrection_None = 0x0,
- DAC960_V1_ErrorCorrection_Parity = 0x1,
- DAC960_V1_ErrorCorrection_ECC = 0x2,
- DAC960_V1_ErrorCorrection_Last = 0x7
- } __attribute__ ((packed)) ErrorCorrection:3; /* Byte 40 Bits 3-5 */
- bool FastPageMode:1; /* Byte 40 Bit 6 */
- bool LowPowerMemory:1; /* Byte 40 Bit 7 */
- unsigned char :8; /* Bytes 41 */
- } MemoryType;
- unsigned short ClockSpeed; /* Bytes 42-43 */
- unsigned short MemorySpeed; /* Bytes 44-45 */
- unsigned short HardwareSpeed; /* Bytes 46-47 */
- unsigned int :32; /* Bytes 48-51 */
- unsigned int :32; /* Bytes 52-55 */
- unsigned char :8; /* Byte 56 */
- unsigned char :8; /* Byte 57 */
- unsigned short :16; /* Bytes 58-59 */
- unsigned short MaxCommands; /* Bytes 60-61 */
- unsigned short MaxScatterGatherEntries; /* Bytes 62-63 */
- unsigned short MaxDriveCommands; /* Bytes 64-65 */
- unsigned short MaxIODescriptors; /* Bytes 66-67 */
- unsigned short MaxCombinedSectors; /* Bytes 68-69 */
- unsigned char Latency; /* Byte 70 */
- unsigned char :8; /* Byte 71 */
- unsigned char SCSITimeout; /* Byte 72 */
- unsigned char :8; /* Byte 73 */
- unsigned short MinFreeLines; /* Bytes 74-75 */
- unsigned int :32; /* Bytes 76-79 */
- unsigned int :32; /* Bytes 80-83 */
- unsigned char RebuildRateConstant; /* Byte 84 */
- unsigned char :8; /* Byte 85 */
- unsigned char :8; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
- unsigned int :32; /* Bytes 88-91 */
- unsigned int :32; /* Bytes 92-95 */
- unsigned short PhysicalDriveBlockSize; /* Bytes 96-97 */
- unsigned short LogicalDriveBlockSize; /* Bytes 98-99 */
- unsigned short MaxBlocksPerCommand; /* Bytes 100-101 */
- unsigned short BlockFactor; /* Bytes 102-103 */
- unsigned short CacheLineSize; /* Bytes 104-105 */
- struct {
- enum {
- DAC960_V1_Narrow_8bit = 0x0,
- DAC960_V1_Wide_16bit = 0x1,
- DAC960_V1_Wide_32bit = 0x2
- } __attribute__ ((packed)) BusWidth:2; /* Byte 106 Bits 0-1 */
- enum {
- DAC960_V1_Fast = 0x0,
- DAC960_V1_Ultra = 0x1,
- DAC960_V1_Ultra2 = 0x2
- } __attribute__ ((packed)) BusSpeed:2; /* Byte 106 Bits 2-3 */
- bool Differential:1; /* Byte 106 Bit 4 */
- unsigned char :3; /* Byte 106 Bits 5-7 */
- } SCSICapability;
- unsigned char :8; /* Byte 107 */
- unsigned int :32; /* Bytes 108-111 */
- unsigned short FirmwareBuildNumber; /* Bytes 112-113 */
- enum {
- DAC960_V1_AEMI = 0x01,
- DAC960_V1_OEM1 = 0x02,
- DAC960_V1_OEM2 = 0x04,
- DAC960_V1_OEM3 = 0x08,
- DAC960_V1_Conner = 0x10,
- DAC960_V1_SAFTE = 0x20
- } __attribute__ ((packed)) FaultManagementType; /* Byte 114 */
- unsigned char :8; /* Byte 115 */
- struct {
- bool Clustering:1; /* Byte 116 Bit 0 */
- bool MylexOnlineRAIDExpansion:1; /* Byte 116 Bit 1 */
- bool ReadAhead:1; /* Byte 116 Bit 2 */
- bool BackgroundInitialization:1; /* Byte 116 Bit 3 */
- unsigned int :28; /* Bytes 116-119 */
- } FirmwareFeatures;
- unsigned int :32; /* Bytes 120-123 */
- unsigned int :32; /* Bytes 124-127 */
-}
-DAC960_V1_Enquiry2_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive State type.
-*/
-
-typedef enum
-{
- DAC960_V1_LogicalDrive_Online = 0x03,
- DAC960_V1_LogicalDrive_Critical = 0x04,
- DAC960_V1_LogicalDrive_Offline = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V1_LogicalDriveState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive Information structure.
-*/
-
-typedef struct DAC960_V1_LogicalDriveInformation
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- DAC960_V1_LogicalDriveState_T LogicalDriveState; /* Byte 4 */
- unsigned char RAIDLevel:7; /* Byte 5 Bits 0-6 */
- bool WriteBack:1; /* Byte 5 Bit 7 */
- unsigned short :16; /* Bytes 6-7 */
-}
-DAC960_V1_LogicalDriveInformation_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Logical Drive Information Command
- reply structure.
-*/
-
-typedef DAC960_V1_LogicalDriveInformation_T
- DAC960_V1_LogicalDriveInformationArray_T[DAC960_MaxLogicalDrives];
-
-
-/*
- Define the DAC960 V1 Firmware Perform Event Log Operation Types.
-*/
-
-typedef enum
-{
- DAC960_V1_GetEventLogEntry = 0x00
-}
-__attribute__ ((packed))
-DAC960_V1_PerformEventLogOpType_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Event Log Entry Command reply structure.
-*/
-
-typedef struct DAC960_V1_EventLogEntry
-{
- unsigned char MessageType; /* Byte 0 */
- unsigned char MessageLength; /* Byte 1 */
- unsigned char TargetID:5; /* Byte 2 Bits 0-4 */
- unsigned char Channel:3; /* Byte 2 Bits 5-7 */
- unsigned char LogicalUnit:6; /* Byte 3 Bits 0-5 */
- unsigned char :2; /* Byte 3 Bits 6-7 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char ErrorCode:7; /* Byte 6 Bits 0-6 */
- bool Valid:1; /* Byte 6 Bit 7 */
- unsigned char SegmentNumber; /* Byte 7 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 8 Bits 0-3 */
- unsigned char :1; /* Byte 8 Bit 4 */
- bool ILI:1; /* Byte 8 Bit 5 */
- bool EOM:1; /* Byte 8 Bit 6 */
- bool Filemark:1; /* Byte 8 Bit 7 */
- unsigned char Information[4]; /* Bytes 9-12 */
- unsigned char AdditionalSenseLength; /* Byte 13 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 14-17 */
- unsigned char AdditionalSenseCode; /* Byte 18 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 19 */
- unsigned char Dummy[12]; /* Bytes 20-31 */
-}
-DAC960_V1_EventLogEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V1_Device_Dead = 0x00,
- DAC960_V1_Device_WriteOnly = 0x02,
- DAC960_V1_Device_Online = 0x03,
- DAC960_V1_Device_Standby = 0x10
-}
-__attribute__ ((packed))
-DAC960_V1_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Device State Command reply structure.
- The structure is padded by 2 bytes for compatibility with Version 2.xx
- Firmware.
-*/
-
-typedef struct DAC960_V1_DeviceState
-{
- bool Present:1; /* Byte 0 Bit 0 */
- unsigned char :7; /* Byte 0 Bits 1-7 */
- enum {
- DAC960_V1_OtherType = 0x0,
- DAC960_V1_DiskType = 0x1,
- DAC960_V1_SequentialType = 0x2,
- DAC960_V1_CDROM_or_WORM_Type = 0x3
- } __attribute__ ((packed)) DeviceType:2; /* Byte 1 Bits 0-1 */
- bool :1; /* Byte 1 Bit 2 */
- bool Fast20:1; /* Byte 1 Bit 3 */
- bool Sync:1; /* Byte 1 Bit 4 */
- bool Fast:1; /* Byte 1 Bit 5 */
- bool Wide:1; /* Byte 1 Bit 6 */
- bool TaggedQueuingSupported:1; /* Byte 1 Bit 7 */
- DAC960_V1_PhysicalDeviceState_T DeviceState; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned char SynchronousMultiplier; /* Byte 4 */
- unsigned char SynchronousOffset:5; /* Byte 5 Bits 0-4 */
- unsigned char :3; /* Byte 5 Bits 5-7 */
- unsigned int DiskSize __attribute__ ((packed)); /* Bytes 6-9 */
- unsigned short :16; /* Bytes 10-11 */
-}
-DAC960_V1_DeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
-*/
-
-typedef struct DAC960_V1_RebuildProgress
-{
- unsigned int LogicalDriveNumber; /* Bytes 0-3 */
- unsigned int LogicalDriveSize; /* Bytes 4-7 */
- unsigned int RemainingBlocks; /* Bytes 8-11 */
-}
-DAC960_V1_RebuildProgress_T;
-
-
-/*
- Define the DAC960 V1 Firmware Background Initialization Status Command
- reply structure.
-*/
-
-typedef struct DAC960_V1_BackgroundInitializationStatus
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- unsigned int BlocksCompleted; /* Bytes 4-7 */
- unsigned char Reserved1[12]; /* Bytes 8-19 */
- unsigned int LogicalDriveNumber; /* Bytes 20-23 */
- unsigned char RAIDLevel; /* Byte 24 */
- enum {
- DAC960_V1_BackgroundInitializationInvalid = 0x00,
- DAC960_V1_BackgroundInitializationStarted = 0x02,
- DAC960_V1_BackgroundInitializationInProgress = 0x04,
- DAC960_V1_BackgroundInitializationSuspended = 0x05,
- DAC960_V1_BackgroundInitializationCancelled = 0x06
- } __attribute__ ((packed)) Status; /* Byte 25 */
- unsigned char Reserved2[6]; /* Bytes 26-31 */
-}
-DAC960_V1_BackgroundInitializationStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Error Table Entry structure.
-*/
-
-typedef struct DAC960_V1_ErrorTableEntry
-{
- unsigned char ParityErrorCount; /* Byte 0 */
- unsigned char SoftErrorCount; /* Byte 1 */
- unsigned char HardErrorCount; /* Byte 2 */
- unsigned char MiscErrorCount; /* Byte 3 */
-}
-DAC960_V1_ErrorTableEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Error Table Command reply structure.
-*/
-
-typedef struct DAC960_V1_ErrorTable
-{
- DAC960_V1_ErrorTableEntry_T
- ErrorTableEntries[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
-}
-DAC960_V1_ErrorTable_T;
-
-
-/*
- Define the DAC960 V1 Firmware Read Config2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Config2
-{
- unsigned char :1; /* Byte 0 Bit 0 */
- bool ActiveNegationEnabled:1; /* Byte 0 Bit 1 */
- unsigned char :5; /* Byte 0 Bits 2-6 */
- bool NoRescanIfResetReceivedDuringScan:1; /* Byte 0 Bit 7 */
- bool StorageWorksSupportEnabled:1; /* Byte 1 Bit 0 */
- bool HewlettPackardSupportEnabled:1; /* Byte 1 Bit 1 */
- bool NoDisconnectOnFirstCommand:1; /* Byte 1 Bit 2 */
- unsigned char :2; /* Byte 1 Bits 3-4 */
- bool AEMI_ARM:1; /* Byte 1 Bit 5 */
- bool AEMI_OFM:1; /* Byte 1 Bit 6 */
- unsigned char :1; /* Byte 1 Bit 7 */
- enum {
- DAC960_V1_OEMID_Mylex = 0x00,
- DAC960_V1_OEMID_IBM = 0x08,
- DAC960_V1_OEMID_HP = 0x0A,
- DAC960_V1_OEMID_DEC = 0x0C,
- DAC960_V1_OEMID_Siemens = 0x10,
- DAC960_V1_OEMID_Intel = 0x12
- } __attribute__ ((packed)) OEMID; /* Byte 2 */
- unsigned char OEMModelNumber; /* Byte 3 */
- unsigned char PhysicalSector; /* Byte 4 */
- unsigned char LogicalSector; /* Byte 5 */
- unsigned char BlockFactor; /* Byte 6 */
- bool ReadAheadEnabled:1; /* Byte 7 Bit 0 */
- bool LowBIOSDelay:1; /* Byte 7 Bit 1 */
- unsigned char :2; /* Byte 7 Bits 2-3 */
- bool ReassignRestrictedToOneSector:1; /* Byte 7 Bit 4 */
- unsigned char :1; /* Byte 7 Bit 5 */
- bool ForceUnitAccessDuringWriteRecovery:1; /* Byte 7 Bit 6 */
- bool EnableLeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */
- unsigned char DefaultRebuildRate; /* Byte 8 */
- unsigned char :8; /* Byte 9 */
- unsigned char BlocksPerCacheLine; /* Byte 10 */
- unsigned char BlocksPerStripe; /* Byte 11 */
- struct {
- enum {
- DAC960_V1_Async = 0x0,
- DAC960_V1_Sync_8MHz = 0x1,
- DAC960_V1_Sync_5MHz = 0x2,
- DAC960_V1_Sync_10or20MHz = 0x3 /* Byte 11 Bits 0-1 */
- } __attribute__ ((packed)) Speed:2;
- bool Force8Bit:1; /* Byte 11 Bit 2 */
- bool DisableFast20:1; /* Byte 11 Bit 3 */
- unsigned char :3; /* Byte 11 Bits 4-6 */
- bool EnableTaggedQueuing:1; /* Byte 11 Bit 7 */
- } __attribute__ ((packed)) ChannelParameters[6]; /* Bytes 12-17 */
- unsigned char SCSIInitiatorID; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- enum {
- DAC960_V1_StartupMode_ControllerSpinUp = 0x00,
- DAC960_V1_StartupMode_PowerOnSpinUp = 0x01
- } __attribute__ ((packed)) StartupMode; /* Byte 20 */
- unsigned char SimultaneousDeviceSpinUpCount; /* Byte 21 */
- unsigned char SecondsDelayBetweenSpinUps; /* Byte 22 */
- unsigned char Reserved1[29]; /* Bytes 23-51 */
- bool BIOSDisabled:1; /* Byte 52 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 52 Bit 1 */
- unsigned char :3; /* Byte 52 Bits 2-4 */
- enum {
- DAC960_V1_Geometry_128_32 = 0x0,
- DAC960_V1_Geometry_255_63 = 0x1,
- DAC960_V1_Geometry_Reserved1 = 0x2,
- DAC960_V1_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 52 Bits 5-6 */
- unsigned char :1; /* Byte 52 Bit 7 */
- unsigned char Reserved2[9]; /* Bytes 53-61 */
- unsigned short Checksum; /* Bytes 62-63 */
-}
-DAC960_V1_Config2_T;
-
-
-/*
- Define the DAC960 V1 Firmware DCDB request structure.
-*/
-
-typedef struct DAC960_V1_DCDB
-{
- unsigned char TargetID:4; /* Byte 0 Bits 0-3 */
- unsigned char Channel:4; /* Byte 0 Bits 4-7 */
- enum {
- DAC960_V1_DCDB_NoDataTransfer = 0,
- DAC960_V1_DCDB_DataTransferDeviceToSystem = 1,
- DAC960_V1_DCDB_DataTransferSystemToDevice = 2,
- DAC960_V1_DCDB_IllegalDataTransfer = 3
- } __attribute__ ((packed)) Direction:2; /* Byte 1 Bits 0-1 */
- bool EarlyStatus:1; /* Byte 1 Bit 2 */
- unsigned char :1; /* Byte 1 Bit 3 */
- enum {
- DAC960_V1_DCDB_Timeout_24_hours = 0,
- DAC960_V1_DCDB_Timeout_10_seconds = 1,
- DAC960_V1_DCDB_Timeout_60_seconds = 2,
- DAC960_V1_DCDB_Timeout_10_minutes = 3
- } __attribute__ ((packed)) Timeout:2; /* Byte 1 Bits 4-5 */
- bool NoAutomaticRequestSense:1; /* Byte 1 Bit 6 */
- bool DisconnectPermitted:1; /* Byte 1 Bit 7 */
- unsigned short TransferLength; /* Bytes 2-3 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 4-7 */
- unsigned char CDBLength:4; /* Byte 8 Bits 0-3 */
- unsigned char TransferLengthHigh4:4; /* Byte 8 Bits 4-7 */
- unsigned char SenseLength; /* Byte 9 */
- unsigned char CDB[12]; /* Bytes 10-21 */
- unsigned char SenseData[64]; /* Bytes 22-85 */
- unsigned char Status; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
-}
-DAC960_V1_DCDB_T;
-
-
-/*
- Define the DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
- 32 Bit Byte Count structure.
-*/
-
-typedef struct DAC960_V1_ScatterGatherSegment
-{
- DAC960_BusAddress32_T SegmentDataPointer; /* Bytes 0-3 */
- DAC960_ByteCount32_T SegmentByteCount; /* Bytes 4-7 */
-}
-DAC960_V1_ScatterGatherSegment_T;
-
-
-/*
- Define the 13 Byte DAC960 V1 Firmware Command Mailbox structure. Bytes 13-15
- are not used. The Command Mailbox structure is padded to 16 bytes for
- efficient access.
-*/
-
-typedef union DAC960_V1_CommandMailbox
-{
- unsigned int Words[4]; /* Words 0-3 */
- unsigned char Bytes[16]; /* Bytes 0-15 */
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy[14]; /* Bytes 2-15 */
- } __attribute__ ((packed)) Common;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[6]; /* Bytes 2-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char Dummy1[5]; /* Bytes 3-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3B;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[5]; /* Bytes 2-6 */
- unsigned char LogicalDriveNumber:6; /* Byte 7 Bits 0-6 */
- bool AutoRestore:1; /* Byte 7 Bit 7 */
- unsigned char Dummy2[8]; /* Bytes 8-15 */
- } __attribute__ ((packed)) Type3C;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Channel; /* Byte 2 */
- unsigned char TargetID; /* Byte 3 */
- DAC960_V1_PhysicalDeviceState_T DeviceState:5; /* Byte 4 Bits 0-4 */
- unsigned char Modifier:3; /* Byte 4 Bits 5-7 */
- unsigned char Dummy1[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3D;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- DAC960_V1_PerformEventLogOpType_T OperationType; /* Byte 2 */
- unsigned char OperationQualifier; /* Byte 3 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char Dummy1[2]; /* Bytes 6-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3E;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[2]; /* Bytes 2-3 */
- unsigned char RebuildRateConstant; /* Byte 4 */
- unsigned char Dummy2[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy3[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3R;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned short TransferLength; /* Bytes 2-3 */
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char LogicalDriveNumber; /* Byte 12 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type4;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- struct {
- unsigned short TransferLength:11; /* Bytes 2-3 */
- unsigned char LogicalDriveNumber:5; /* Byte 3 Bits 3-7 */
- } __attribute__ ((packed)) LD;
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char ScatterGatherCount:6; /* Byte 12 Bits 0-5 */
- enum {
- DAC960_V1_ScatterGather_32BitAddress_32BitByteCount = 0x0,
- DAC960_V1_ScatterGather_32BitAddress_16BitByteCount = 0x1,
- DAC960_V1_ScatterGather_32BitByteCount_32BitAddress = 0x2,
- DAC960_V1_ScatterGather_16BitByteCount_32BitAddress = 0x3
- } __attribute__ ((packed)) ScatterGatherType:2; /* Byte 12 Bits 6-7 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type5;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- DAC960_BusAddress32_T CommandMailboxesBusAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T StatusMailboxesBusAddress; /* Bytes 8-11 */
- unsigned char Dummy[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) TypeX;
-}
-DAC960_V1_CommandMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_MemCopy = 0x01,
- DAC960_V2_SCSI_10_Passthru = 0x02,
- DAC960_V2_SCSI_255_Passthru = 0x03,
- DAC960_V2_SCSI_10 = 0x04,
- DAC960_V2_SCSI_256 = 0x05,
- DAC960_V2_IOCTL = 0x20
-}
-__attribute__ ((packed))
-DAC960_V2_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware IOCTL Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_GetControllerInfo = 0x01,
- DAC960_V2_GetLogicalDeviceInfoValid = 0x03,
- DAC960_V2_GetPhysicalDeviceInfoValid = 0x05,
- DAC960_V2_GetHealthStatus = 0x11,
- DAC960_V2_GetEvent = 0x15,
- DAC960_V2_StartDiscovery = 0x81,
- DAC960_V2_SetDeviceState = 0x82,
- DAC960_V2_RebuildDeviceStart = 0x88,
- DAC960_V2_RebuildDeviceStop = 0x89,
- DAC960_V2_ConsistencyCheckStart = 0x8C,
- DAC960_V2_ConsistencyCheckStop = 0x8D,
- DAC960_V2_SetMemoryMailbox = 0x8E,
- DAC960_V2_PauseDevice = 0x92,
- DAC960_V2_TranslatePhysicalToLogicalDevice = 0xC5
-}
-__attribute__ ((packed))
-DAC960_V2_IOCTL_Opcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Identifier type.
-*/
-
-typedef unsigned short DAC960_V2_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Status Codes.
-*/
-
-#define DAC960_V2_NormalCompletion 0x00
-#define DAC960_V2_AbormalCompletion 0x02
-#define DAC960_V2_DeviceBusy 0x08
-#define DAC960_V2_DeviceNonresponsive 0x0E
-#define DAC960_V2_DeviceNonresponsive2 0x0F
-#define DAC960_V2_DeviceRevervationConflict 0x18
-
-typedef unsigned char DAC960_V2_CommandStatus_T;
-
-
-/*
- Define the DAC960 V2 Firmware Memory Type structure.
-*/
-
-typedef struct DAC960_V2_MemoryType
-{
- enum {
- DAC960_V2_MemoryType_Reserved = 0x00,
- DAC960_V2_MemoryType_DRAM = 0x01,
- DAC960_V2_MemoryType_EDRAM = 0x02,
- DAC960_V2_MemoryType_EDO = 0x03,
- DAC960_V2_MemoryType_SDRAM = 0x04,
- DAC960_V2_MemoryType_Last = 0x1F
- } __attribute__ ((packed)) MemoryType:5; /* Byte 0 Bits 0-4 */
- bool :1; /* Byte 0 Bit 5 */
- bool MemoryParity:1; /* Byte 0 Bit 6 */
- bool MemoryECC:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_MemoryType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Processor Type structure.
-*/
-
-typedef enum
-{
- DAC960_V2_ProcessorType_i960CA = 0x01,
- DAC960_V2_ProcessorType_i960RD = 0x02,
- DAC960_V2_ProcessorType_i960RN = 0x03,
- DAC960_V2_ProcessorType_i960RP = 0x04,
- DAC960_V2_ProcessorType_NorthBay = 0x05,
- DAC960_V2_ProcessorType_StrongArm = 0x06,
- DAC960_V2_ProcessorType_i960RM = 0x07
-}
-__attribute__ ((packed))
-DAC960_V2_ProcessorType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Controller Info reply structure.
-*/
-
-typedef struct DAC960_V2_ControllerInfo
-{
- unsigned char :8; /* Byte 0 */
- enum {
- DAC960_V2_SCSI_Bus = 0x00,
- DAC960_V2_Fibre_Bus = 0x01,
- DAC960_V2_PCI_Bus = 0x03
- } __attribute__ ((packed)) BusInterfaceType; /* Byte 1 */
- enum {
- DAC960_V2_DAC960E = 0x01,
- DAC960_V2_DAC960M = 0x08,
- DAC960_V2_DAC960PD = 0x10,
- DAC960_V2_DAC960PL = 0x11,
- DAC960_V2_DAC960PU = 0x12,
- DAC960_V2_DAC960PE = 0x13,
- DAC960_V2_DAC960PG = 0x14,
- DAC960_V2_DAC960PJ = 0x15,
- DAC960_V2_DAC960PTL0 = 0x16,
- DAC960_V2_DAC960PR = 0x17,
- DAC960_V2_DAC960PRL = 0x18,
- DAC960_V2_DAC960PT = 0x19,
- DAC960_V2_DAC1164P = 0x1A,
- DAC960_V2_DAC960PTL1 = 0x1B,
- DAC960_V2_EXR2000P = 0x1C,
- DAC960_V2_EXR3000P = 0x1D,
- DAC960_V2_AcceleRAID352 = 0x1E,
- DAC960_V2_AcceleRAID170 = 0x1F,
- DAC960_V2_AcceleRAID160 = 0x20,
- DAC960_V2_DAC960S = 0x60,
- DAC960_V2_DAC960SU = 0x61,
- DAC960_V2_DAC960SX = 0x62,
- DAC960_V2_DAC960SF = 0x63,
- DAC960_V2_DAC960SS = 0x64,
- DAC960_V2_DAC960FL = 0x65,
- DAC960_V2_DAC960LL = 0x66,
- DAC960_V2_DAC960FF = 0x67,
- DAC960_V2_DAC960HP = 0x68,
- DAC960_V2_RAIDBRICK = 0x69,
- DAC960_V2_METEOR_FL = 0x6A,
- DAC960_V2_METEOR_FF = 0x6B
- } __attribute__ ((packed)) ControllerType; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned short BusInterfaceSpeedMHz; /* Bytes 4-5 */
- unsigned char BusWidthBits; /* Byte 6 */
- unsigned char FlashCodeTypeOrProductID; /* Byte 7 */
- unsigned char NumberOfHostPortsPresent; /* Byte 8 */
- unsigned char Reserved1[7]; /* Bytes 9-15 */
- unsigned char BusInterfaceName[16]; /* Bytes 16-31 */
- unsigned char ControllerName[16]; /* Bytes 32-47 */
- unsigned char Reserved2[16]; /* Bytes 48-63 */
- /* Firmware Release Information */
- unsigned char FirmwareMajorVersion; /* Byte 64 */
- unsigned char FirmwareMinorVersion; /* Byte 65 */
- unsigned char FirmwareTurnNumber; /* Byte 66 */
- unsigned char FirmwareBuildNumber; /* Byte 67 */
- unsigned char FirmwareReleaseDay; /* Byte 68 */
- unsigned char FirmwareReleaseMonth; /* Byte 69 */
- unsigned char FirmwareReleaseYearHigh2Digits; /* Byte 70 */
- unsigned char FirmwareReleaseYearLow2Digits; /* Byte 71 */
- /* Hardware Release Information */
- unsigned char HardwareRevision; /* Byte 72 */
- unsigned int :24; /* Bytes 73-75 */
- unsigned char HardwareReleaseDay; /* Byte 76 */
- unsigned char HardwareReleaseMonth; /* Byte 77 */
- unsigned char HardwareReleaseYearHigh2Digits; /* Byte 78 */
- unsigned char HardwareReleaseYearLow2Digits; /* Byte 79 */
- /* Hardware Manufacturing Information */
- unsigned char ManufacturingBatchNumber; /* Byte 80 */
- unsigned char :8; /* Byte 81 */
- unsigned char ManufacturingPlantNumber; /* Byte 82 */
- unsigned char :8; /* Byte 83 */
- unsigned char HardwareManufacturingDay; /* Byte 84 */
- unsigned char HardwareManufacturingMonth; /* Byte 85 */
- unsigned char HardwareManufacturingYearHigh2Digits; /* Byte 86 */
- unsigned char HardwareManufacturingYearLow2Digits; /* Byte 87 */
- unsigned char MaximumNumberOfPDDperXLD; /* Byte 88 */
- unsigned char MaximumNumberOfILDperXLD; /* Byte 89 */
- unsigned short NonvolatileMemorySizeKB; /* Bytes 90-91 */
- unsigned char MaximumNumberOfXLD; /* Byte 92 */
- unsigned int :24; /* Bytes 93-95 */
- /* Unique Information per Controller */
- unsigned char ControllerSerialNumber[16]; /* Bytes 96-111 */
- unsigned char Reserved3[16]; /* Bytes 112-127 */
- /* Vendor Information */
- unsigned int :24; /* Bytes 128-130 */
- unsigned char OEM_Code; /* Byte 131 */
- unsigned char VendorName[16]; /* Bytes 132-147 */
- /* Other Physical/Controller/Operation Information */
- bool BBU_Present:1; /* Byte 148 Bit 0 */
- bool ActiveActiveClusteringMode:1; /* Byte 148 Bit 1 */
- unsigned char :6; /* Byte 148 Bits 2-7 */
- unsigned char :8; /* Byte 149 */
- unsigned short :16; /* Bytes 150-151 */
- /* Physical Device Scan Information */
- bool PhysicalScanActive:1; /* Byte 152 Bit 0 */
- unsigned char :7; /* Byte 152 Bits 1-7 */
- unsigned char PhysicalDeviceChannelNumber; /* Byte 153 */
- unsigned char PhysicalDeviceTargetID; /* Byte 154 */
- unsigned char PhysicalDeviceLogicalUnit; /* Byte 155 */
- /* Maximum Command Data Transfer Sizes */
- unsigned short MaximumDataTransferSizeInBlocks; /* Bytes 156-157 */
- unsigned short MaximumScatterGatherEntries; /* Bytes 158-159 */
- /* Logical/Physical Device Counts */
- unsigned short LogicalDevicesPresent; /* Bytes 160-161 */
- unsigned short LogicalDevicesCritical; /* Bytes 162-163 */
- unsigned short LogicalDevicesOffline; /* Bytes 164-165 */
- unsigned short PhysicalDevicesPresent; /* Bytes 166-167 */
- unsigned short PhysicalDisksPresent; /* Bytes 168-169 */
- unsigned short PhysicalDisksCritical; /* Bytes 170-171 */
- unsigned short PhysicalDisksOffline; /* Bytes 172-173 */
- unsigned short MaximumParallelCommands; /* Bytes 174-175 */
- /* Channel and Target ID Information */
- unsigned char NumberOfPhysicalChannelsPresent; /* Byte 176 */
- unsigned char NumberOfVirtualChannelsPresent; /* Byte 177 */
- unsigned char NumberOfPhysicalChannelsPossible; /* Byte 178 */
- unsigned char NumberOfVirtualChannelsPossible; /* Byte 179 */
- unsigned char MaximumTargetsPerChannel[16]; /* Bytes 180-195 */
- unsigned char Reserved4[12]; /* Bytes 196-207 */
- /* Memory/Cache Information */
- unsigned short MemorySizeMB; /* Bytes 208-209 */
- unsigned short CacheSizeMB; /* Bytes 210-211 */
- unsigned int ValidCacheSizeInBytes; /* Bytes 212-215 */
- unsigned int DirtyCacheSizeInBytes; /* Bytes 216-219 */
- unsigned short MemorySpeedMHz; /* Bytes 220-221 */
- unsigned char MemoryDataWidthBits; /* Byte 222 */
- DAC960_V2_MemoryType_T MemoryType; /* Byte 223 */
- unsigned char CacheMemoryTypeName[16]; /* Bytes 224-239 */
- /* Execution Memory Information */
- unsigned short ExecutionMemorySizeMB; /* Bytes 240-241 */
- unsigned short ExecutionL2CacheSizeMB; /* Bytes 242-243 */
- unsigned char Reserved5[8]; /* Bytes 244-251 */
- unsigned short ExecutionMemorySpeedMHz; /* Bytes 252-253 */
- unsigned char ExecutionMemoryDataWidthBits; /* Byte 254 */
- DAC960_V2_MemoryType_T ExecutionMemoryType; /* Byte 255 */
- unsigned char ExecutionMemoryTypeName[16]; /* Bytes 256-271 */
- /* First CPU Type Information */
- unsigned short FirstProcessorSpeedMHz; /* Bytes 272-273 */
- DAC960_V2_ProcessorType_T FirstProcessorType; /* Byte 274 */
- unsigned char FirstProcessorCount; /* Byte 275 */
- unsigned char Reserved6[12]; /* Bytes 276-287 */
- unsigned char FirstProcessorName[16]; /* Bytes 288-303 */
- /* Second CPU Type Information */
- unsigned short SecondProcessorSpeedMHz; /* Bytes 304-305 */
- DAC960_V2_ProcessorType_T SecondProcessorType; /* Byte 306 */
- unsigned char SecondProcessorCount; /* Byte 307 */
- unsigned char Reserved7[12]; /* Bytes 308-319 */
- unsigned char SecondProcessorName[16]; /* Bytes 320-335 */
- /* Debugging/Profiling/Command Time Tracing Information */
- unsigned short CurrentProfilingDataPageNumber; /* Bytes 336-337 */
- unsigned short ProgramsAwaitingProfilingData; /* Bytes 338-339 */
- unsigned short CurrentCommandTimeTraceDataPageNumber; /* Bytes 340-341 */
- unsigned short ProgramsAwaitingCommandTimeTraceData; /* Bytes 342-343 */
- unsigned char Reserved8[8]; /* Bytes 344-351 */
- /* Error Counters on Physical Devices */
- unsigned short PhysicalDeviceBusResets; /* Bytes 352-353 */
- unsigned short PhysicalDeviceParityErrors; /* Bytes 355-355 */
- unsigned short PhysicalDeviceSoftErrors; /* Bytes 356-357 */
- unsigned short PhysicalDeviceCommandsFailed; /* Bytes 358-359 */
- unsigned short PhysicalDeviceMiscellaneousErrors; /* Bytes 360-361 */
- unsigned short PhysicalDeviceCommandTimeouts; /* Bytes 362-363 */
- unsigned short PhysicalDeviceSelectionTimeouts; /* Bytes 364-365 */
- unsigned short PhysicalDeviceRetriesDone; /* Bytes 366-367 */
- unsigned short PhysicalDeviceAbortsDone; /* Bytes 368-369 */
- unsigned short PhysicalDeviceHostCommandAbortsDone; /* Bytes 370-371 */
- unsigned short PhysicalDevicePredictedFailuresDetected; /* Bytes 372-373 */
- unsigned short PhysicalDeviceHostCommandsFailed; /* Bytes 374-375 */
- unsigned short PhysicalDeviceHardErrors; /* Bytes 376-377 */
- unsigned char Reserved9[6]; /* Bytes 378-383 */
- /* Error Counters on Logical Devices */
- unsigned short LogicalDeviceSoftErrors; /* Bytes 384-385 */
- unsigned short LogicalDeviceCommandsFailed; /* Bytes 386-387 */
- unsigned short LogicalDeviceHostCommandAbortsDone; /* Bytes 388-389 */
- unsigned short :16; /* Bytes 390-391 */
- /* Error Counters on Controller */
- unsigned short ControllerMemoryErrors; /* Bytes 392-393 */
- unsigned short ControllerHostCommandAbortsDone; /* Bytes 394-395 */
- unsigned int :32; /* Bytes 396-399 */
- /* Long Duration Activity Information */
- unsigned short BackgroundInitializationsActive; /* Bytes 400-401 */
- unsigned short LogicalDeviceInitializationsActive; /* Bytes 402-403 */
- unsigned short PhysicalDeviceInitializationsActive; /* Bytes 404-405 */
- unsigned short ConsistencyChecksActive; /* Bytes 406-407 */
- unsigned short RebuildsActive; /* Bytes 408-409 */
- unsigned short OnlineExpansionsActive; /* Bytes 410-411 */
- unsigned short PatrolActivitiesActive; /* Bytes 412-413 */
- unsigned short :16; /* Bytes 414-415 */
- /* Flash ROM Information */
- unsigned char FlashType; /* Byte 416 */
- unsigned char :8; /* Byte 417 */
- unsigned short FlashSizeMB; /* Bytes 418-419 */
- unsigned int FlashLimit; /* Bytes 420-423 */
- unsigned int FlashCount; /* Bytes 424-427 */
- unsigned int :32; /* Bytes 428-431 */
- unsigned char FlashTypeName[16]; /* Bytes 432-447 */
- /* Firmware Run Time Information */
- unsigned char RebuildRate; /* Byte 448 */
- unsigned char BackgroundInitializationRate; /* Byte 449 */
- unsigned char ForegroundInitializationRate; /* Byte 450 */
- unsigned char ConsistencyCheckRate; /* Byte 451 */
- unsigned int :32; /* Bytes 452-455 */
- unsigned int MaximumDP; /* Bytes 456-459 */
- unsigned int FreeDP; /* Bytes 460-463 */
- unsigned int MaximumIOP; /* Bytes 464-467 */
- unsigned int FreeIOP; /* Bytes 468-471 */
- unsigned short MaximumCombLengthInBlocks; /* Bytes 472-473 */
- unsigned short NumberOfConfigurationGroups; /* Bytes 474-475 */
- bool InstallationAbortStatus:1; /* Byte 476 Bit 0 */
- bool MaintenanceModeStatus:1; /* Byte 476 Bit 1 */
- unsigned int :24; /* Bytes 476-479 */
- unsigned char Reserved10[32]; /* Bytes 480-511 */
- unsigned char Reserved11[512]; /* Bytes 512-1023 */
-}
-DAC960_V2_ControllerInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_LogicalDevice_Online = 0x01,
- DAC960_V2_LogicalDevice_Offline = 0x08,
- DAC960_V2_LogicalDevice_Critical = 0x09
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Logical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_LogicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState; /* Byte 4 */
- unsigned char RAIDLevel; /* Byte 5 */
- unsigned char StripeSize; /* Byte 6 */
- unsigned char CacheLineSize; /* Byte 7 */
- struct {
- enum {
- DAC960_V2_ReadCacheDisabled = 0x0,
- DAC960_V2_ReadCacheEnabled = 0x1,
- DAC960_V2_ReadAheadEnabled = 0x2,
- DAC960_V2_IntelligentReadAheadEnabled = 0x3,
- DAC960_V2_ReadCache_Last = 0x7
- } __attribute__ ((packed)) ReadCache:3; /* Byte 8 Bits 0-2 */
- enum {
- DAC960_V2_WriteCacheDisabled = 0x0,
- DAC960_V2_LogicalDeviceReadOnly = 0x1,
- DAC960_V2_WriteCacheEnabled = 0x2,
- DAC960_V2_IntelligentWriteCacheEnabled = 0x3,
- DAC960_V2_WriteCache_Last = 0x7
- } __attribute__ ((packed)) WriteCache:3; /* Byte 8 Bits 3-5 */
- bool :1; /* Byte 8 Bit 6 */
- bool LogicalDeviceInitialized:1; /* Byte 8 Bit 7 */
- } LogicalDeviceControl; /* Byte 8 */
- /* Logical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 9 Bit 0 */
- bool RebuildInProgress:1; /* Byte 9 Bit 1 */
- bool BackgroundInitializationInProgress:1; /* Byte 9 Bit 2 */
- bool ForegroundInitializationInProgress:1; /* Byte 9 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 9 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 9 Bit 5 */
- unsigned char :2; /* Byte 9 Bits 6-7 */
- unsigned char RAID5WriteUpdate; /* Byte 10 */
- unsigned char RAID5Algorithm; /* Byte 11 */
- unsigned short LogicalDeviceNumber; /* Bytes 12-13 */
- /* BIOS Info */
- bool BIOSDisabled:1; /* Byte 14 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 14 Bit 1 */
- bool DriveCoercionEnabled:1; /* Byte 14 Bit 2 */
- bool WriteSameDisabled:1; /* Byte 14 Bit 3 */
- bool HBA_ModeEnabled:1; /* Byte 14 Bit 4 */
- enum {
- DAC960_V2_Geometry_128_32 = 0x0,
- DAC960_V2_Geometry_255_63 = 0x1,
- DAC960_V2_Geometry_Reserved1 = 0x2,
- DAC960_V2_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 14 Bits 5-6 */
- bool SuperReadAheadEnabled:1; /* Byte 14 Bit 7 */
- unsigned char :8; /* Byte 15 */
- /* Error Counters */
- unsigned short SoftErrors; /* Bytes 16-17 */
- unsigned short CommandsFailed; /* Bytes 18-19 */
- unsigned short HostCommandAbortsDone; /* Bytes 20-21 */
- unsigned short DeferredWriteErrors; /* Bytes 22-23 */
- unsigned int :32; /* Bytes 24-27 */
- unsigned int :32; /* Bytes 28-31 */
- /* Device Size Information */
- unsigned short :16; /* Bytes 32-33 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 34-35 */
- unsigned int OriginalDeviceSize; /* Bytes 36-39 */
- unsigned int ConfigurableDeviceSize; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char LogicalDeviceName[32]; /* Bytes 48-79 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 80-115 */
- unsigned char Reserved1[12]; /* Bytes 116-127 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 128-135 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 136-143 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 144-151 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 152-159 */
- DAC960_ByteCount64_T BackgroundInitializationBlockNumber; /* Bytes 160-167 */
- DAC960_ByteCount64_T ForegroundInitializationBlockNumber; /* Bytes 168-175 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 176-183 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 184-191 */
- unsigned char Reserved2[64]; /* Bytes 192-255 */
-}
-DAC960_V2_LogicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_Device_Unconfigured = 0x00,
- DAC960_V2_Device_Online = 0x01,
- DAC960_V2_Device_Rebuild = 0x03,
- DAC960_V2_Device_Missing = 0x04,
- DAC960_V2_Device_Critical = 0x05,
- DAC960_V2_Device_Dead = 0x08,
- DAC960_V2_Device_SuspectedDead = 0x0C,
- DAC960_V2_Device_CommandedOffline = 0x10,
- DAC960_V2_Device_Standby = 0x21,
- DAC960_V2_Device_InvalidState = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Physical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- /* Configuration Status Bits */
- bool PhysicalDeviceFaultTolerant:1; /* Byte 4 Bit 0 */
- bool PhysicalDeviceConnected:1; /* Byte 4 Bit 1 */
- bool PhysicalDeviceLocalToController:1; /* Byte 4 Bit 2 */
- unsigned char :5; /* Byte 4 Bits 3-7 */
- /* Multiple Host/Controller Status Bits */
- bool RemoteHostSystemDead:1; /* Byte 5 Bit 0 */
- bool RemoteControllerDead:1; /* Byte 5 Bit 1 */
- unsigned char :6; /* Byte 5 Bits 2-7 */
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; /* Byte 6 */
- unsigned char NegotiatedDataWidthBits; /* Byte 7 */
- unsigned short NegotiatedSynchronousMegaTransfers; /* Bytes 8-9 */
- /* Multiported Physical Device Information */
- unsigned char NumberOfPortConnections; /* Byte 10 */
- unsigned char DriveAccessibilityBitmap; /* Byte 11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned char NetworkAddress[16]; /* Bytes 16-31 */
- unsigned short MaximumTags; /* Bytes 32-33 */
- /* Physical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 34 Bit 0 */
- bool RebuildInProgress:1; /* Byte 34 Bit 1 */
- bool MakingDataConsistentInProgress:1; /* Byte 34 Bit 2 */
- bool PhysicalDeviceInitializationInProgress:1; /* Byte 34 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 34 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 34 Bit 5 */
- unsigned char :2; /* Byte 34 Bits 6-7 */
- unsigned char LongOperationStatus; /* Byte 35 */
- unsigned char ParityErrors; /* Byte 36 */
- unsigned char SoftErrors; /* Byte 37 */
- unsigned char HardErrors; /* Byte 38 */
- unsigned char MiscellaneousErrors; /* Byte 39 */
- unsigned char CommandTimeouts; /* Byte 40 */
- unsigned char Retries; /* Byte 41 */
- unsigned char Aborts; /* Byte 42 */
- unsigned char PredictedFailuresDetected; /* Byte 43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned short :16; /* Bytes 48-49 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 50-51 */
- unsigned int OriginalDeviceSize; /* Bytes 52-55 */
- unsigned int ConfigurableDeviceSize; /* Bytes 56-59 */
- unsigned int :32; /* Bytes 60-63 */
- unsigned char PhysicalDeviceName[16]; /* Bytes 64-79 */
- unsigned char Reserved1[16]; /* Bytes 80-95 */
- unsigned char Reserved2[32]; /* Bytes 96-127 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 128-163 */
- unsigned char Reserved3[20]; /* Bytes 164-183 */
- unsigned char Reserved4[8]; /* Bytes 184-191 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 192-199 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 200-207 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 208-215 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 216-223 */
- DAC960_ByteCount64_T MakingDataConsistentBlockNumber; /* Bytes 224-231 */
- DAC960_ByteCount64_T DeviceInitializationBlockNumber; /* Bytes 232-239 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 240-247 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 248-255 */
- unsigned char Reserved5[256]; /* Bytes 256-511 */
-}
-DAC960_V2_PhysicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Health Status Buffer structure.
-*/
-
-typedef struct DAC960_V2_HealthStatusBuffer
-{
- unsigned int MicrosecondsFromControllerStartTime; /* Bytes 0-3 */
- unsigned int MillisecondsFromControllerStartTime; /* Bytes 4-7 */
- unsigned int SecondsFrom1January1970; /* Bytes 8-11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned int StatusChangeCounter; /* Bytes 16-19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int DebugOutputMessageBufferIndex; /* Bytes 24-27 */
- unsigned int CodedMessageBufferIndex; /* Bytes 28-31 */
- unsigned int CurrentTimeTracePageNumber; /* Bytes 32-35 */
- unsigned int CurrentProfilerPageNumber; /* Bytes 36-39 */
- unsigned int NextEventSequenceNumber; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char Reserved1[16]; /* Bytes 48-63 */
- unsigned char Reserved2[64]; /* Bytes 64-127 */
-}
-DAC960_V2_HealthStatusBuffer_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Event reply structure.
-*/
-
-typedef struct DAC960_V2_Event
-{
- unsigned int EventSequenceNumber; /* Bytes 0-3 */
- unsigned int EventTime; /* Bytes 4-7 */
- unsigned int EventCode; /* Bytes 8-11 */
- unsigned char :8; /* Byte 12 */
- unsigned char Channel; /* Byte 13 */
- unsigned char TargetID; /* Byte 14 */
- unsigned char LogicalUnit; /* Byte 15 */
- unsigned int :32; /* Bytes 16-19 */
- unsigned int EventSpecificParameter; /* Bytes 20-23 */
- unsigned char RequestSenseData[40]; /* Bytes 24-63 */
-}
-DAC960_V2_Event_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Control Bits structure.
-*/
-
-typedef struct DAC960_V2_CommandControlBits
-{
- bool ForceUnitAccess:1; /* Byte 0 Bit 0 */
- bool DisablePageOut:1; /* Byte 0 Bit 1 */
- bool :1; /* Byte 0 Bit 2 */
- bool AdditionalScatterGatherListMemory:1; /* Byte 0 Bit 3 */
- bool DataTransferControllerToHost:1; /* Byte 0 Bit 4 */
- bool :1; /* Byte 0 Bit 5 */
- bool NoAutoRequestSense:1; /* Byte 0 Bit 6 */
- bool DisconnectProhibited:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_CommandControlBits_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Timeout structure.
-*/
-
-typedef struct DAC960_V2_CommandTimeout
-{
- unsigned char TimeoutValue:6; /* Byte 0 Bits 0-5 */
- enum {
- DAC960_V2_TimeoutScale_Seconds = 0,
- DAC960_V2_TimeoutScale_Minutes = 1,
- DAC960_V2_TimeoutScale_Hours = 2,
- DAC960_V2_TimeoutScale_Reserved = 3
- } __attribute__ ((packed)) TimeoutScale:2; /* Byte 0 Bits 6-7 */
-}
-DAC960_V2_CommandTimeout_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDevice
-{
- unsigned char LogicalUnit; /* Byte 0 */
- unsigned char TargetID; /* Byte 1 */
- unsigned char Channel:3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device structure.
-*/
-
-typedef struct DAC960_V2_LogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned char :3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Operation Device type.
-*/
-
-typedef enum
-{
- DAC960_V2_Physical_Device = 0x00,
- DAC960_V2_RAID_Device = 0x01,
- DAC960_V2_Physical_Channel = 0x02,
- DAC960_V2_RAID_Channel = 0x03,
- DAC960_V2_Physical_Controller = 0x04,
- DAC960_V2_RAID_Controller = 0x05,
- DAC960_V2_Configuration_Group = 0x10,
- DAC960_V2_Enclosure = 0x11
-}
-__attribute__ ((packed))
-DAC960_V2_OperationDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Translate Physical To Logical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalToLogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned short :16; /* Bytes 2-3 */
- unsigned char PreviousBootController; /* Byte 4 */
- unsigned char PreviousBootChannel; /* Byte 5 */
- unsigned char PreviousBootTargetID; /* Byte 6 */
- unsigned char PreviousBootLogicalUnit; /* Byte 7 */
-}
-DAC960_V2_PhysicalToLogicalDevice_T;
-
-
-
-/*
- Define the DAC960 V2 Firmware Scatter/Gather List Entry structure.
-*/
-
-typedef struct DAC960_V2_ScatterGatherSegment
-{
- DAC960_BusAddress64_T SegmentDataPointer; /* Bytes 0-7 */
- DAC960_ByteCount64_T SegmentByteCount; /* Bytes 8-15 */
-}
-DAC960_V2_ScatterGatherSegment_T;
-
-
-/*
- Define the DAC960 V2 Firmware Data Transfer Memory Address structure.
-*/
-
-typedef union DAC960_V2_DataTransferMemoryAddress
-{
- DAC960_V2_ScatterGatherSegment_T ScatterGatherSegments[2]; /* Bytes 0-31 */
- struct {
- unsigned short ScatterGatherList0Length; /* Bytes 0-1 */
- unsigned short ScatterGatherList1Length; /* Bytes 2-3 */
- unsigned short ScatterGatherList2Length; /* Bytes 4-5 */
- unsigned short :16; /* Bytes 6-7 */
- DAC960_BusAddress64_T ScatterGatherList0Address; /* Bytes 8-15 */
- DAC960_BusAddress64_T ScatterGatherList1Address; /* Bytes 16-23 */
- DAC960_BusAddress64_T ScatterGatherList2Address; /* Bytes 24-31 */
- } ExtendedScatterGather;
-}
-DAC960_V2_DataTransferMemoryAddress_T;
-
-
-/*
- Define the 64 Byte DAC960 V2 Firmware Command Mailbox structure.
-*/
-
-typedef union DAC960_V2_CommandMailbox
-{
- unsigned int Words[16]; /* Words 0-15 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } Common;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned char SCSI_CDB[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_10;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned short :16; /* Bytes 22-23 */
- DAC960_BusAddress64_T SCSI_CDB_BusAddress; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_255;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short :16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ControllerInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } LogicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } PhysicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short EventSequenceNumberHigh16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned short EventSequenceNumberLow16; /* Bytes 22-23 */
- unsigned char Reserved[8]; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } GetEvent;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- union {
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState;
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState;
- } DeviceState; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SetDeviceState;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- bool RestoreConsistency:1; /* Byte 22 Bit 0 */
- bool InitializedAreaOnly:1; /* Byte 22 Bit 1 */
- unsigned char :6; /* Byte 22 Bits 2-7 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ConsistencyCheck;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- unsigned char FirstCommandMailboxSizeKB; /* Byte 4 */
- unsigned char FirstStatusMailboxSizeKB; /* Byte 5 */
- unsigned char SecondCommandMailboxSizeKB; /* Byte 6 */
- unsigned char SecondStatusMailboxSizeKB; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char HealthStatusBufferSizeKB; /* Byte 22 */
- unsigned char :8; /* Byte 23 */
- DAC960_BusAddress64_T HealthStatusBufferBusAddress; /* Bytes 24-31 */
- DAC960_BusAddress64_T FirstCommandMailboxBusAddress; /* Bytes 32-39 */
- DAC960_BusAddress64_T FirstStatusMailboxBusAddress; /* Bytes 40-47 */
- DAC960_BusAddress64_T SecondCommandMailboxBusAddress; /* Bytes 48-55 */
- DAC960_BusAddress64_T SecondStatusMailboxBusAddress; /* Bytes 56-63 */
- } SetMemoryMailbox;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- DAC960_V2_OperationDevice_T OperationDevice; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } DeviceOperation;
-}
-DAC960_V2_CommandMailbox_T;
-
-
-/*
- Define the DAC960 Driver IOCTL requests.
-*/
-
-#define DAC960_IOCTL_GET_CONTROLLER_COUNT 0xDAC001
-#define DAC960_IOCTL_GET_CONTROLLER_INFO 0xDAC002
-#define DAC960_IOCTL_V1_EXECUTE_COMMAND 0xDAC003
-#define DAC960_IOCTL_V2_EXECUTE_COMMAND 0xDAC004
-#define DAC960_IOCTL_V2_GET_HEALTH_STATUS 0xDAC005
-
-
-/*
- Define the DAC960_IOCTL_GET_CONTROLLER_INFO reply structure.
-*/
-
-typedef struct DAC960_ControllerInfo
-{
- unsigned char ControllerNumber;
- unsigned char FirmwareType;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char PCI_Bus;
- unsigned char PCI_Device;
- unsigned char PCI_Function;
- unsigned char IRQ_Channel;
- DAC960_PCI_Address_T PCI_Address;
- unsigned char ModelName[20];
- unsigned char FirmwareVersion[12];
-}
-DAC960_ControllerInfo_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void __user *DataTransferBuffer;
- DAC960_V1_DCDB_T __user *DCDB;
-}
-DAC960_V1_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void *DataTransferBuffer;
- DAC960_V1_DCDB_T *DCDB;
- DAC960_V1_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V1_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V1_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void __user *DataTransferBuffer;
- void __user *RequestSenseBuffer;
-}
-DAC960_V2_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void *DataTransferBuffer;
- void *RequestSenseBuffer;
- DAC960_V2_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V2_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V2_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_GET_HEALTH_STATUS request structure.
-*/
-
-typedef struct DAC960_V2_GetHealthStatus
-{
- unsigned char ControllerNumber;
- DAC960_V2_HealthStatusBuffer_T __user *HealthStatusBuffer;
-}
-DAC960_V2_GetHealthStatus_T;
-
-
-/*
- Import the Kernel Mode IOCTL interface.
-*/
-
-extern int DAC960_KernelIOCTL(unsigned int Request, void *Argument);
-
-
-/*
- DAC960_DriverVersion protects the private portion of this file.
-*/
-
-#ifdef DAC960_DriverVersion
-
-
-/*
- Define the maximum Driver Queue Depth and Controller Queue Depth supported
- by DAC960 V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxDriverQueueDepth 511
-#define DAC960_MaxControllerQueueDepth 512
-
-
-/*
- Define the maximum number of Scatter/Gather Segments supported for any
- DAC960 V1 and V2 Firmware controller.
-*/
-
-#define DAC960_V1_ScatterGatherLimit 33
-#define DAC960_V2_ScatterGatherLimit 128
-
-
-/*
- Define the number of Command Mailboxes and Status Mailboxes used by the
- DAC960 V1 and V2 Firmware Memory Mailbox Interface.
-*/
-
-#define DAC960_V1_CommandMailboxCount 256
-#define DAC960_V1_StatusMailboxCount 1024
-#define DAC960_V2_CommandMailboxCount 512
-#define DAC960_V2_StatusMailboxCount 512
-
-
-/*
- Define the DAC960 Controller Monitoring Timer Interval.
-*/
-
-#define DAC960_MonitoringTimerInterval (10 * HZ)
-
-
-/*
- Define the DAC960 Controller Secondary Monitoring Interval.
-*/
-
-#define DAC960_SecondaryMonitoringInterval (60 * HZ)
-
-
-/*
- Define the DAC960 Controller Health Status Monitoring Interval.
-*/
-
-#define DAC960_HealthStatusMonitoringInterval (1 * HZ)
-
-
-/*
- Define the DAC960 Controller Progress Reporting Interval.
-*/
-
-#define DAC960_ProgressReportingInterval (60 * HZ)
-
-
-/*
- Define the maximum number of Partitions allowed for each Logical Drive.
-*/
-
-#define DAC960_MaxPartitions 8
-#define DAC960_MaxPartitionsBits 3
-
-/*
- Define the DAC960 Controller fixed Block Size and Block Size Bits.
-*/
-
-#define DAC960_BlockSize 512
-#define DAC960_BlockSizeBits 9
-
-
-/*
- Define the number of Command structures that should be allocated as a
- group to optimize kernel memory allocation.
-*/
-
-#define DAC960_V1_CommandAllocationGroupSize 11
-#define DAC960_V2_CommandAllocationGroupSize 29
-
-
-/*
- Define the Controller Line Buffer, Progress Buffer, User Message, and
- Initial Status Buffer sizes.
-*/
-
-#define DAC960_LineBufferSize 100
-#define DAC960_ProgressBufferSize 200
-#define DAC960_UserMessageSize 200
-#define DAC960_InitialStatusBufferSize (8192-32)
-
-
-/*
- Define the DAC960 Controller Firmware Types.
-*/
-
-typedef enum
-{
- DAC960_V1_Controller = 1,
- DAC960_V2_Controller = 2
-}
-DAC960_FirmwareType_T;
-
-
-/*
- Define the DAC960 Controller Hardware Types.
-*/
-
-typedef enum
-{
- DAC960_BA_Controller = 1, /* eXtremeRAID 2000 */
- DAC960_LP_Controller = 2, /* AcceleRAID 352 */
- DAC960_LA_Controller = 3, /* DAC1164P */
- DAC960_PG_Controller = 4, /* DAC960PTL/PJ/PG */
- DAC960_PD_Controller = 5, /* DAC960PU/PD/PL/P */
- DAC960_P_Controller = 6, /* DAC960PU/PD/PL/P */
- DAC960_GEM_Controller = 7, /* AcceleRAID 4/5/600 */
-}
-DAC960_HardwareType_T;
-
-
-/*
- Define the Driver Message Levels.
-*/
-
-typedef enum DAC960_MessageLevel
-{
- DAC960_AnnounceLevel = 0,
- DAC960_InfoLevel = 1,
- DAC960_NoticeLevel = 2,
- DAC960_WarningLevel = 3,
- DAC960_ErrorLevel = 4,
- DAC960_ProgressLevel = 5,
- DAC960_CriticalLevel = 6,
- DAC960_UserCriticalLevel = 7
-}
-DAC960_MessageLevel_T;
-
-static char
- *DAC960_MessageLevelMap[] =
- { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING,
- KERN_ERR, KERN_CRIT, KERN_CRIT, KERN_CRIT };
-
-
-/*
- Define Driver Message macros.
-*/
-
-#define DAC960_Announce(Format, Arguments...) \
- DAC960_Message(DAC960_AnnounceLevel, Format, ##Arguments)
-
-#define DAC960_Info(Format, Arguments...) \
- DAC960_Message(DAC960_InfoLevel, Format, ##Arguments)
-
-#define DAC960_Notice(Format, Arguments...) \
- DAC960_Message(DAC960_NoticeLevel, Format, ##Arguments)
-
-#define DAC960_Warning(Format, Arguments...) \
- DAC960_Message(DAC960_WarningLevel, Format, ##Arguments)
-
-#define DAC960_Error(Format, Arguments...) \
- DAC960_Message(DAC960_ErrorLevel, Format, ##Arguments)
-
-#define DAC960_Progress(Format, Arguments...) \
- DAC960_Message(DAC960_ProgressLevel, Format, ##Arguments)
-
-#define DAC960_Critical(Format, Arguments...) \
- DAC960_Message(DAC960_CriticalLevel, Format, ##Arguments)
-
-#define DAC960_UserCritical(Format, Arguments...) \
- DAC960_Message(DAC960_UserCriticalLevel, Format, ##Arguments)
-
-
-struct DAC960_privdata {
- DAC960_HardwareType_T HardwareType;
- DAC960_FirmwareType_T FirmwareType;
- irq_handler_t InterruptHandler;
- unsigned int MemoryWindowSize;
-};
-
-
-/*
- Define the DAC960 V1 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V1_StatusMailbox
-{
- unsigned int Word; /* Word 0 */
- struct {
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 0 */
- unsigned char :7; /* Byte 1 Bits 0-6 */
- bool Valid:1; /* Byte 1 Bit 7 */
- DAC960_V1_CommandStatus_T CommandStatus; /* Bytes 2-3 */
- } Fields;
-}
-DAC960_V1_StatusMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V2_StatusMailbox
-{
- unsigned int Words[2]; /* Words 0-1 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandStatus_T CommandStatus; /* Byte 2 */
- unsigned char RequestSenseLength; /* Byte 3 */
- int DataTransferResidue; /* Bytes 4-7 */
- } Fields;
-}
-DAC960_V2_StatusMailbox_T;
-
-
-/*
- Define the DAC960 Driver Command Types.
-*/
-
-typedef enum
-{
- DAC960_ReadCommand = 1,
- DAC960_WriteCommand = 2,
- DAC960_ReadRetryCommand = 3,
- DAC960_WriteRetryCommand = 4,
- DAC960_MonitoringCommand = 5,
- DAC960_ImmediateCommand = 6,
- DAC960_QueuedCommand = 7
-}
-DAC960_CommandType_T;
-
-
-/*
- Define the DAC960 Driver Command structure.
-*/
-
-typedef struct DAC960_Command
-{
- int CommandIdentifier;
- DAC960_CommandType_T CommandType;
- struct DAC960_Controller *Controller;
- struct DAC960_Command *Next;
- struct completion *Completion;
- unsigned int LogicalDriveNumber;
- unsigned int BlockNumber;
- unsigned int BlockCount;
- unsigned int SegmentCount;
- int DmaDirection;
- struct scatterlist *cmd_sglist;
- struct request *Request;
- union {
- struct {
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_KernelCommand_T *KernelCommand;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- struct scatterlist ScatterList[DAC960_V1_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V1;
- struct {
- DAC960_V2_CommandMailbox_T CommandMailbox;
- DAC960_V2_KernelCommand_T *KernelCommand;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned char RequestSenseLength;
- int DataTransferResidue;
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- DAC960_SCSI_RequestSense_T *RequestSense;
- dma_addr_t RequestSenseDMA;
- struct scatterlist ScatterList[DAC960_V2_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V2;
- } FW;
-}
-DAC960_Command_T;
-
-
-/*
- Define the DAC960 Driver Controller structure.
-*/
-
-typedef struct DAC960_Controller
-{
- void __iomem *BaseAddress;
- void __iomem *MemoryMappedAddress;
- DAC960_FirmwareType_T FirmwareType;
- DAC960_HardwareType_T HardwareType;
- DAC960_IO_Address_T IO_Address;
- DAC960_PCI_Address_T PCI_Address;
- struct pci_dev *PCIDevice;
- unsigned char ControllerNumber;
- unsigned char ControllerName[4];
- unsigned char ModelName[20];
- unsigned char FullModelName[28];
- unsigned char FirmwareVersion[12];
- unsigned char Bus;
- unsigned char Device;
- unsigned char Function;
- unsigned char IRQ_Channel;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char MemorySize;
- unsigned char LogicalDriveCount;
- unsigned short CommandAllocationGroupSize;
- unsigned short ControllerQueueDepth;
- unsigned short DriverQueueDepth;
- unsigned short MaxBlocksPerCommand;
- unsigned short ControllerScatterGatherLimit;
- unsigned short DriverScatterGatherLimit;
- unsigned int CombinedStatusBufferLength;
- unsigned int InitialStatusLength;
- unsigned int CurrentStatusLength;
- unsigned int ProgressBufferLength;
- unsigned int UserStatusLength;
- struct dma_loaf DmaPages;
- unsigned long MonitoringTimerCount;
- unsigned long PrimaryMonitoringTime;
- unsigned long SecondaryMonitoringTime;
- unsigned long ShutdownMonitoringTimer;
- unsigned long LastProgressReportTime;
- unsigned long LastCurrentStatusTime;
- bool ControllerInitialized;
- bool MonitoringCommandDeferred;
- bool EphemeralProgressMessage;
- bool DriveSpinUpMessageDisplayed;
- bool MonitoringAlertMode;
- bool SuppressEnclosureMessages;
- struct timer_list MonitoringTimer;
- struct gendisk *disks[DAC960_MaxLogicalDrives];
- struct dma_pool *ScatterGatherPool;
- DAC960_Command_T *FreeCommands;
- unsigned char *CombinedStatusBuffer;
- unsigned char *CurrentStatusBuffer;
- struct request_queue *RequestQueue[DAC960_MaxLogicalDrives];
- int req_q_index;
- spinlock_t queue_lock;
- wait_queue_head_t CommandWaitQueue;
- wait_queue_head_t HealthStatusWaitQueue;
- DAC960_Command_T InitialCommand;
- DAC960_Command_T *Commands[DAC960_MaxDriverQueueDepth];
- struct proc_dir_entry *ControllerProcEntry;
- bool LogicalDriveInitiallyAccessible[DAC960_MaxLogicalDrives];
- void (*QueueCommand)(DAC960_Command_T *Command);
- bool (*ReadControllerConfiguration)(struct DAC960_Controller *);
- bool (*ReadDeviceConfiguration)(struct DAC960_Controller *);
- bool (*ReportDeviceConfiguration)(struct DAC960_Controller *);
- void (*QueueReadWriteCommand)(DAC960_Command_T *Command);
- union {
- struct {
- unsigned char GeometryTranslationHeads;
- unsigned char GeometryTranslationSectors;
- unsigned char PendingRebuildFlag;
- unsigned short StripeSize;
- unsigned short SegmentSize;
- unsigned short NewEventLogSequenceNumber;
- unsigned short OldEventLogSequenceNumber;
- unsigned short DeviceStateChannel;
- unsigned short DeviceStateTargetID;
- bool DualModeMemoryMailboxInterface;
- bool BackgroundInitializationStatusSupported;
- bool SAFTE_EnclosureManagementEnabled;
- bool NeedLogicalDriveInformation;
- bool NeedErrorTableInformation;
- bool NeedDeviceStateInformation;
- bool NeedDeviceInquiryInformation;
- bool NeedDeviceSerialNumberInformation;
- bool NeedRebuildProgress;
- bool NeedConsistencyCheckProgress;
- bool NeedBackgroundInitializationStatus;
- bool StartDeviceStateScan;
- bool RebuildProgressFirst;
- bool RebuildFlagPending;
- bool RebuildStatusPending;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V1_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V1_CommandMailbox_T *LastCommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V1_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V1_StatusMailbox_T *LastStatusMailbox;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
-
- DAC960_V1_DCDB_T *MonitoringDCDB;
- dma_addr_t MonitoringDCDB_DMA;
-
- DAC960_V1_Enquiry_T Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry;
- dma_addr_t NewEnquiryDMA;
-
- DAC960_V1_ErrorTable_T ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable;
- dma_addr_t NewErrorTableDMA;
-
- DAC960_V1_EventLogEntry_T *EventLogEntry;
- dma_addr_t EventLogEntryDMA;
-
- DAC960_V1_RebuildProgress_T *RebuildProgress;
- dma_addr_t RebuildProgressDMA;
- DAC960_V1_CommandStatus_T LastRebuildStatus;
- DAC960_V1_CommandStatus_T PendingRebuildStatus;
-
- DAC960_V1_LogicalDriveInformationArray_T LogicalDriveInformation;
- DAC960_V1_LogicalDriveInformationArray_T *NewLogicalDriveInformation;
- dma_addr_t NewLogicalDriveInformationDMA;
-
- DAC960_V1_BackgroundInitializationStatus_T
- *BackgroundInitializationStatus;
- dma_addr_t BackgroundInitializationStatusDMA;
- DAC960_V1_BackgroundInitializationStatus_T
- LastBackgroundInitializationStatus;
-
- DAC960_V1_DeviceState_T
- DeviceState[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_V1_DeviceState_T *NewDeviceState;
- dma_addr_t NewDeviceStateDMA;
-
- DAC960_SCSI_Inquiry_T
- InquiryStandardData[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData;
- dma_addr_t NewInquiryStandardDataDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- InquiryUnitSerialNumber[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
-
- int DeviceResetCount[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- bool DirectCommandActive[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- } V1;
- struct {
- unsigned int StatusChangeCounter;
- unsigned int NextEventSequenceNumber;
- unsigned int PhysicalDeviceIndex;
- bool NeedLogicalDeviceInformation;
- bool NeedPhysicalDeviceInformation;
- bool NeedDeviceSerialNumberInformation;
- bool StartLogicalDeviceInformationScan;
- bool StartPhysicalDeviceInformationScan;
- struct dma_pool *RequestSensePool;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V2_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V2_CommandMailbox_T *LastCommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V2_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V2_StatusMailbox_T *LastStatusMailbox;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
-
- dma_addr_t HealthStatusBufferDMA;
- DAC960_V2_HealthStatusBuffer_T *HealthStatusBuffer;
-
- DAC960_V2_ControllerInfo_T ControllerInformation;
- DAC960_V2_ControllerInfo_T *NewControllerInformation;
- dma_addr_t NewControllerInformationDMA;
-
- DAC960_V2_LogicalDeviceInfo_T
- *LogicalDeviceInformation[DAC960_MaxLogicalDrives];
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInformation;
- dma_addr_t NewLogicalDeviceInformationDMA;
-
- DAC960_V2_PhysicalDeviceInfo_T
- *PhysicalDeviceInformation[DAC960_V2_MaxPhysicalDevices];
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInformation;
- dma_addr_t NewPhysicalDeviceInformationDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber[DAC960_V2_MaxPhysicalDevices];
-
- DAC960_V2_Event_T *Event;
- dma_addr_t EventDMA;
-
- DAC960_V2_PhysicalToLogicalDevice_T *PhysicalToLogicalDevice;
- dma_addr_t PhysicalToLogicalDeviceDMA;
-
- DAC960_V2_PhysicalDevice_T
- LogicalDriveToVirtualDevice[DAC960_MaxLogicalDrives];
- bool LogicalDriveFoundDuringScan[DAC960_MaxLogicalDrives];
- } V2;
- } FW;
- unsigned char ProgressBuffer[DAC960_ProgressBufferSize];
- unsigned char UserStatusBuffer[DAC960_UserMessageSize];
-}
-DAC960_Controller_T;
-
-
-/*
- Simplify access to Firmware Version Dependent Data Structure Components
- and Functions.
-*/
-
-#define V1 FW.V1
-#define V2 FW.V2
-#define DAC960_QueueCommand(Command) \
- (Controller->QueueCommand)(Command)
-#define DAC960_ReadControllerConfiguration(Controller) \
- (Controller->ReadControllerConfiguration)(Controller)
-#define DAC960_ReadDeviceConfiguration(Controller) \
- (Controller->ReadDeviceConfiguration)(Controller)
-#define DAC960_ReportDeviceConfiguration(Controller) \
- (Controller->ReportDeviceConfiguration)(Controller)
-#define DAC960_QueueReadWriteCommand(Command) \
- (Controller->QueueReadWriteCommand)(Command)
-
-/*
- * dma_addr_writeql is provided to write dma_addr_t types
- * to a 64-bit pci address space register. The controller
- * will accept having the register written as two 32-bit
- * values.
- *
- * In HIGHMEM kernels, dma_addr_t is a 64-bit value.
- * without HIGHMEM, dma_addr_t is a 32-bit value.
- *
- * The compiler should always fix up the assignment
- * to u.wq appropriately, depending upon the size of
- * dma_addr_t.
- */
-static inline
-void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address)
-{
- union {
- u64 wq;
- uint wl[2];
- } u;
-
- u.wq = addr;
-
- writel(u.wl[0], write_address);
- writel(u.wl[1], write_address + 4);
-}
-
-/*
- Define the DAC960 GEM Series Controller Interface Register Offsets.
- */
-
-#define DAC960_GEM_RegisterWindowSize 0x600
-
-typedef enum
-{
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset = 0x214,
- DAC960_GEM_InboundDoorBellRegisterClearOffset = 0x218,
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset = 0x224,
- DAC960_GEM_OutboundDoorBellRegisterClearOffset = 0x228,
- DAC960_GEM_InterruptStatusRegisterOffset = 0x208,
- DAC960_GEM_InterruptMaskRegisterReadSetOffset = 0x22C,
- DAC960_GEM_InterruptMaskRegisterClearOffset = 0x230,
- DAC960_GEM_CommandMailboxBusAddressOffset = 0x510,
- DAC960_GEM_CommandStatusOffset = 0x518,
- DAC960_GEM_ErrorStatusRegisterReadSetOffset = 0x224,
- DAC960_GEM_ErrorStatusRegisterClearOffset = 0x228,
-}
-DAC960_GEM_RegisterOffsets_T;
-
-/*
- Define the structure of the DAC960 GEM Series Inbound Door Bell
- */
-
-typedef union DAC960_GEM_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool HardwareMailboxNewCommand:1;
- bool AcknowledgeHardwareMailboxStatus:1;
- bool GenerateInterrupt:1;
- bool ControllerReset:1;
- bool MemoryMailboxNewCommand:1;
- unsigned int :3;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxFull:1;
- bool InitializationInProgress:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_InboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Outbound Door Bell Register.
- */
-typedef union DAC960_GEM_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool AcknowledgeHardwareMailboxInterrupt:1;
- bool AcknowledgeMemoryMailboxInterrupt:1;
- unsigned int :6;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxStatusAvailable:1;
- bool MemoryMailboxStatusAvailable:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_OutboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Interrupt Mask Register.
- */
-typedef union DAC960_GEM_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int :16;
- unsigned int :8;
- unsigned int HardwareMailboxInterrupt:1;
- unsigned int MemoryMailboxInterrupt:1;
- unsigned int :6;
- } Bits;
-}
-DAC960_GEM_InterruptMaskRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Error Status Register.
- */
-
-typedef union DAC960_GEM_ErrorStatusRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- unsigned int :5;
- bool ErrorStatusPending:1;
- unsigned int :2;
- } Bits;
-}
-DAC960_GEM_ErrorStatusRegister_T;
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 GEM Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_GEM_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_GEM_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_GEM_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_GEM_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InterruptMaskRegisterReadSetOffset);
- return !(InterruptMaskRegister.Bits.HardwareMailboxInterrupt ||
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt);
-}
-
-static inline
-void DAC960_GEM_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_GEM_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_GEM_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_GEM_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_GEM_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_GEM_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_GEM_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readl(ControllerBaseAddress + DAC960_GEM_ErrorStatusRegisterReadSetOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 1);
- writel(0x03000000, ControllerBaseAddress +
- DAC960_GEM_ErrorStatusRegisterClearOffset);
- return true;
-}
-
-/*
- Define the DAC960 BA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_BA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_BA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_BA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_BA_InterruptStatusRegisterOffset = 0x30,
- DAC960_BA_InterruptMaskRegisterOffset = 0x34,
- DAC960_BA_CommandMailboxBusAddressOffset = 0x50,
- DAC960_BA_CommandStatusOffset = 0x58,
- DAC960_BA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_BA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_BA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- bool DisableInterruptsI2O:1; /* Bit 3 */
- unsigned int :4; /* Bits 4-7 */
- } Bits;
-}
-DAC960_BA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Error Status Register.
-*/
-
-typedef union DAC960_BA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_BA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 BA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_BA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_BA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_BA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_BA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_BA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_BA_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-
-static inline
-void DAC960_BA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_BA_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_BA_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_BA_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_BA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_BA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LP Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LP_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LP_InboundDoorBellRegisterOffset = 0x20,
- DAC960_LP_OutboundDoorBellRegisterOffset = 0x2C,
- DAC960_LP_InterruptStatusRegisterOffset = 0x30,
- DAC960_LP_InterruptMaskRegisterOffset = 0x34,
- DAC960_LP_CommandMailboxBusAddressOffset = 0x10,
- DAC960_LP_CommandStatusOffset = 0x18,
- DAC960_LP_ErrorStatusRegisterOffset = 0x2E
-}
-DAC960_LP_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LP_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Error Status Register.
-*/
-
-typedef union DAC960_LP_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LP Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LP_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_LP_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LP_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LP_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LP_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LP_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LP_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_LP_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_LP_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_LP_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_LP_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LP_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_LA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_LA_InterruptMaskRegisterOffset = 0x34,
- DAC960_LA_CommandOpcodeRegisterOffset = 0x50,
- DAC960_LA_CommandIdentifierRegisterOffset = 0x51,
- DAC960_LA_MailboxRegister2Offset = 0x52,
- DAC960_LA_MailboxRegister3Offset = 0x53,
- DAC960_LA_MailboxRegister4Offset = 0x54,
- DAC960_LA_MailboxRegister5Offset = 0x55,
- DAC960_LA_MailboxRegister6Offset = 0x56,
- DAC960_LA_MailboxRegister7Offset = 0x57,
- DAC960_LA_MailboxRegister8Offset = 0x58,
- DAC960_LA_MailboxRegister9Offset = 0x59,
- DAC960_LA_MailboxRegister10Offset = 0x5A,
- DAC960_LA_MailboxRegister11Offset = 0x5B,
- DAC960_LA_MailboxRegister12Offset = 0x5C,
- DAC960_LA_StatusCommandIdentifierRegOffset = 0x5D,
- DAC960_LA_StatusRegisterOffset = 0x5E,
- DAC960_LA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_LA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned char :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned char :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Error Status Register.
-*/
-
-typedef union DAC960_LA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_LA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LA_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_LA_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_LA_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_LA_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_LA_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_LA_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_LA_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LA_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_LA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LA_CommandIdentifierRegisterOffset);
- writeb(0xFF, ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PG Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PG_RegisterWindowSize 0x2000
-
-typedef enum
-{
- DAC960_PG_InboundDoorBellRegisterOffset = 0x0020,
- DAC960_PG_OutboundDoorBellRegisterOffset = 0x002C,
- DAC960_PG_InterruptMaskRegisterOffset = 0x0034,
- DAC960_PG_CommandOpcodeRegisterOffset = 0x1000,
- DAC960_PG_CommandIdentifierRegisterOffset = 0x1001,
- DAC960_PG_MailboxRegister2Offset = 0x1002,
- DAC960_PG_MailboxRegister3Offset = 0x1003,
- DAC960_PG_MailboxRegister4Offset = 0x1004,
- DAC960_PG_MailboxRegister5Offset = 0x1005,
- DAC960_PG_MailboxRegister6Offset = 0x1006,
- DAC960_PG_MailboxRegister7Offset = 0x1007,
- DAC960_PG_MailboxRegister8Offset = 0x1008,
- DAC960_PG_MailboxRegister9Offset = 0x1009,
- DAC960_PG_MailboxRegister10Offset = 0x100A,
- DAC960_PG_MailboxRegister11Offset = 0x100B,
- DAC960_PG_MailboxRegister12Offset = 0x100C,
- DAC960_PG_StatusCommandIdentifierRegOffset = 0x1018,
- DAC960_PG_StatusRegisterOffset = 0x101A,
- DAC960_PG_ErrorStatusRegisterOffset = 0x103F
-}
-DAC960_PG_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned int :27; /* Bits 5-31 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_PG_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int MessageUnitInterruptMask1:2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int MessageUnitInterruptMask2:5; /* Bits 3-7 */
- unsigned int Reserved0:24; /* Bits 8-31 */
- } Bits;
-}
-DAC960_PG_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Error Status Register.
-*/
-
-typedef union DAC960_PG_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PG_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PG Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PG_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_PG_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_PG_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_PG_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_PG_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_PG_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_PG_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PG_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PG_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PG_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PG_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PG_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PG_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PG_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PG_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PG_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PG_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PD Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PD_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_PD_CommandOpcodeRegisterOffset = 0x00,
- DAC960_PD_CommandIdentifierRegisterOffset = 0x01,
- DAC960_PD_MailboxRegister2Offset = 0x02,
- DAC960_PD_MailboxRegister3Offset = 0x03,
- DAC960_PD_MailboxRegister4Offset = 0x04,
- DAC960_PD_MailboxRegister5Offset = 0x05,
- DAC960_PD_MailboxRegister6Offset = 0x06,
- DAC960_PD_MailboxRegister7Offset = 0x07,
- DAC960_PD_MailboxRegister8Offset = 0x08,
- DAC960_PD_MailboxRegister9Offset = 0x09,
- DAC960_PD_MailboxRegister10Offset = 0x0A,
- DAC960_PD_MailboxRegister11Offset = 0x0B,
- DAC960_PD_MailboxRegister12Offset = 0x0C,
- DAC960_PD_StatusCommandIdentifierRegOffset = 0x0D,
- DAC960_PD_StatusRegisterOffset = 0x0E,
- DAC960_PD_ErrorStatusRegisterOffset = 0x3F,
- DAC960_PD_InboundDoorBellRegisterOffset = 0x40,
- DAC960_PD_OutboundDoorBellRegisterOffset = 0x41,
- DAC960_PD_InterruptEnableRegisterOffset = 0x43
-}
-DAC960_PD_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool NewCommand:1; /* Bit 0 */
- bool AcknowledgeStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- unsigned char :4; /* Bits 4-7 */
- } Write;
- struct {
- bool MailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_PD_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeInterrupt:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Write;
- struct {
- bool StatusAvailable:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Read;
-}
-DAC960_PD_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Interrupt Enable Register.
-*/
-
-typedef union DAC960_PD_InterruptEnableRegister
-{
- unsigned char All;
- struct {
- bool EnableInterrupts:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Bits;
-}
-DAC960_PD_InterruptEnableRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Error Status Register.
-*/
-
-typedef union DAC960_PD_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PD_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PD Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PD_NewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.NewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_AcknowledgeStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_MailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.MailboxFull;
-}
-
-static inline
-bool DAC960_PD_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PD_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_StatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.StatusAvailable;
-}
-
-static inline
-void DAC960_PD_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = true;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-void DAC960_PD_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = false;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
- return InterruptEnableRegister.Bits.EnableInterrupts;
-}
-
-static inline
-void DAC960_PD_WriteCommandMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PD_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PD_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PD_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PD_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PD_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PD_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PD_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PD_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PD_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PD_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- return true;
-}
-
-static inline void DAC960_P_To_PD_TranslateEnquiry(void *Enquiry)
-{
- memcpy(Enquiry + 132, Enquiry + 36, 64);
- memset(Enquiry + 36, 0, 96);
-}
-
-static inline void DAC960_P_To_PD_TranslateDeviceState(void *DeviceState)
-{
- memcpy(DeviceState + 2, DeviceState + 3, 1);
- memmove(DeviceState + 4, DeviceState + 5, 2);
- memmove(DeviceState + 6, DeviceState + 8, 4);
-}
-
-static inline
-void DAC960_PD_To_P_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Type5.LD.LogicalDriveNumber;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= CommandMailbox->Bytes[7] << 6;
- CommandMailbox->Bytes[7] = LogicalDriveNumber;
-}
-
-static inline
-void DAC960_P_To_PD_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Bytes[7];
- CommandMailbox->Bytes[7] = CommandMailbox->Bytes[3] >> 6;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= LogicalDriveNumber << 3;
-}
-
-
-/*
- Define prototypes for the forward referenced DAC960 Driver Internal Functions.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *);
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_RequestFunction(struct request_queue *);
-static irqreturn_t DAC960_BA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LP_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PG_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PD_InterruptHandler(int, void *);
-static irqreturn_t DAC960_P_InterruptHandler(int, void *);
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_MonitoringTimerFunction(struct timer_list *);
-static void DAC960_Message(DAC960_MessageLevel_T, unsigned char *,
- DAC960_Controller_T *, ...);
-static void DAC960_CreateProcEntries(DAC960_Controller_T *);
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *);
-
-#endif /* DAC960_DriverVersion */
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index d4913516823f..c1747f2953bc 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -121,18 +121,6 @@ source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
-config BLK_DEV_DAC960
- tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
- depends on PCI
- help
- This driver adds support for the Mylex DAC960, AcceleRAID, and
- eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/blockdev/README.DAC960> for further information
- about this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called DAC960.
-
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 8566b188368b..a53cc1e3a2d3 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
--
2.16.4
^ permalink raw reply related [flat|nested] 13+ messages in thread