All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>,
	Jani Nikula <jani.nikula@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v6 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled
Date: Wed, 24 Oct 2018 15:28:26 -0700	[thread overview]
Message-ID: <20181024222840.25683-15-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181024222840.25683-1-manasi.d.navare@intel.com>

If a eDP panel supports both PSR2 and VDSC, our HW cannot
support both at a time. Give priority to PSR2 if a requested
resolution can be supported without compression else enable
VDSC and keep PSR2 disabled.

v3:
* Rebase
v2:
* Add warning for DSC and PSR2 enabled together (DK)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_psr.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 423cdf84059c..37ad21e859af 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -71,9 +71,9 @@ static bool psr_global_enabled(u32 debug)
 static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
 			       const struct intel_crtc_state *crtc_state)
 {
-	/* Disable PSR2 by default for all platforms */
-	if (i915_modparams.enable_psr == -1)
-		return false;
+	/* Cannot enable DSC and PSR2 simultaneously */
+	WARN_ON(crtc_state->dsc_params.compression_enable &&
+		crtc_state->has_psr2);
 
 	switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
 	case I915_PSR_DEBUG_FORCE_PSR1:
@@ -463,6 +463,16 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
+	/*
+	 * DSC and PSR2 cannot be enabled simultaneously. If a requested
+	 * resolution requires DSC to be enabled, priority is given to DSC
+	 * over PSR2.
+	 */
+	if (crtc_state->dsc_params.compression_enable) {
+		DRM_DEBUG_KMS("PSR2 cannot be enabled since DSC is enabled\n");
+		return false;
+	}
+
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
 		psr_max_h = 4096;
 		psr_max_v = 2304;
-- 
2.18.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-10-24 22:28 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-24 22:28 [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-24 22:28 ` [PATCH v6 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-24 22:28 ` [PATCH v6 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-24 22:28 ` [PATCH v6 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-24 22:28 ` [PATCH v6 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-12-19 18:54   ` [Intel-gfx] " Daniel Vetter
2019-01-30 11:06     ` Daniel Vetter
2019-01-30 18:06       ` Sean Paul
2019-01-30 18:27         ` Manasi Navare
2019-01-30 18:26       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-24 22:28 ` [PATCH v6 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-24 22:28 ` [PATCH v6 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-01 16:42   ` Ville Syrjälä
2018-11-01 16:53     ` Ville Syrjälä
2018-11-01 21:48     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-24 22:28 ` [PATCH v6 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-24 22:28 ` [PATCH v6 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-01 16:46   ` Ville Syrjälä
2018-11-01 23:54     ` Manasi Navare
2018-11-02  0:23       ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-30 23:53   ` Manasi Navare
2018-10-31 13:10     ` Ville Syrjälä
2018-10-31 16:05       ` Manasi Navare
2018-10-31 16:13         ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-29 20:30   ` Ville Syrjälä
2018-10-29 20:34     ` Ville Syrjälä
2018-10-29 23:08       ` Manasi Navare
2018-10-30 11:46         ` Ville Syrjälä
2018-10-29 21:42     ` Manasi Navare
2018-10-29 22:12     ` Manasi Navare
2018-10-30 11:41       ` Ville Syrjälä
2018-10-24 22:28 ` Manasi Navare [this message]
2018-10-24 22:28 ` [PATCH v6 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-24 22:28 ` [PATCH v6 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-24 22:28 ` [PATCH v6 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-24 22:28 ` [PATCH v6 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-25 14:03   ` Ville Syrjälä
2018-10-25 20:11     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-24 22:28 ` [PATCH v6 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-24 22:28 ` [PATCH v6 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-10-25 14:08   ` Ville Syrjälä
2018-10-29 19:24     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-25 14:09   ` Ville Syrjälä
2018-10-25 20:07     ` Manasi Navare
2018-10-30 23:45     ` Manasi Navare
2018-10-31 13:09       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-24 22:28 ` [PATCH v6 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-25 14:15   ` Ville Syrjälä
2018-10-25 20:05     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-25 14:16   ` Ville Syrjälä
2018-10-25 19:55     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-25 14:22   ` Ville Syrjälä
2018-10-25 19:41     ` Manasi Navare
2018-10-24 22:28 ` [PATCH v6 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-24 22:28   ` Lyude Paul
2018-10-25 20:12     ` Manasi Navare
2018-10-29 20:39   ` Ville Syrjälä
2018-10-29 21:35     ` Manasi Navare
2018-10-30 11:26       ` Ville Syrjälä
2018-10-24 22:28 ` [PATCH v6 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 22:39 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev6) Patchwork
2018-10-24 22:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-24 23:02 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-31 23:36 ` [PATCH v6 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181024222840.25683-15-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.