[PATCH 4.14 000/135] 4.14.106-stable review

[PATCH 4.14 000/135] 4.14.106-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.106 release.
There are 135 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Mar 14 17:02:27 UTC 2019.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.106-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.106-rc1

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Implement support for TSX Force Abort

Peter Zijlstra (Intel) <peterz@infradead.org>
    x86: Add TSX Force Abort CPUID/MSR

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Generalize dynamic constraint creation

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Make cpuc allocations consistent

Geert Uytterhoeven <geert+renesas@glider.be>
    driver core: Postpone DMA tear-down until after devres release

Daniel F. Dickinson <cshored@thecshore.com>
    ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix missed wakeups in find_insert_glock

Vincent Whitchurch <vincent.whitchurch@axis.com>
    ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    drm: disable uncached DMA optimization for ARM and arm64

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

Jan Kiszka <jan.kiszka@siemens.com>
    arm64: dts: hikey: Give wifi some time after power-on

Gustavo A. R. Silva <gustavo@embeddedor.com>
    scsi: aacraid: Fix missing break in switch statement

Gustavo A. R. Silva <gustavo@embeddedor.com>
    iscsi_ibft: Fix missing break in switch statement

Vincent Batts <vbatts@hashbangbash.com>
    Input: elan_i2c - add id for touchpad found in Lenovo s21e-20

Jason Gerecke <jason.gerecke@wacom.com>
    Input: wacom_serial4 - add support for Wacom ArtPad II tablet

Sudarsana Reddy Kalluru <skalluru@marvell.com>
    qed: Consider TX tcs while deriving the max num_queues for PF.

Manish Chopra <manishc@marvell.com>
    qed: Fix EQ full firmware assert.

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    fs: ratelimit __find_get_block_slow() failure message.

Tony Lindgren <tony@atomide.com>
    i2c: omap: Use noirq system sleep pm ops to idle device for suspend

Jun-Ru Chang <jrjang@realtek.com>
    MIPS: Remove function size check in get_frame_info()

Huacai Chen <chenhc@lemote.com>
    MIPS: Loongson: Introduce and use loongson_llsc_mb()

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf trace: Support multiple "vfs_getname" probes

Jiri Olsa <jolsa@redhat.com>
    perf symbols: Filter out hidden symbols from labels

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix use-after-free in error path

Martynas Pumputis <martynas@weave.works>
    netfilter: nf_nat: skip nat clash resolution for same-origin entries

Florian Westphal <fw@strlen.de>
    selftests: netfilter: add simple masq/redirect test cases

Naresh Kamboju <naresh.kamboju@linaro.org>
    selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: dmatest: Abort test in case of mapping error

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: reset connected sockets on device removal

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: fix kernel panic after device hot-unplug

Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
    dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

Paul Kocialkowski <paul.kocialkowski@bootlin.com>
    drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

Alexei Starovoitov <ast@kernel.org>
    bpf: fix lockdep false positive in percpu_freelist

Martynas Pumputis <m@lambda.lt>
    bpf, selftests: fix handling of sparse CPU allocations

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    relay: check return of create_buf_file() properly

Zenghui Yu <yuzenghui@huawei.com>
    irqchip/gic-v3-its: Fix ITT_entry_size accessor

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Disable EEE mode earlier in XMIT callback

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Send TSO packets always from Queue 0

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Fallback to Platform Data clock in Watchdog conversion

Lubomir Rintel <lkundrak@v3.sk>
    irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

Anders Roxell <anders.roxell@linaro.org>
    usb: phy: fix link errors

Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
    DTS: CI20: Fix bugs in ci20's device tree.

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    arm64: dts: add msm8996 compatible to gicv3

Peng Hao <peng.hao2@zte.com.cn>
    ARM: pxa: ssp: unneeded to free devm_ allocated data

Yafang Shao <laoar.shao@gmail.com>
    bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

Madalin Bucur <madalin.bucur@nxp.com>
    soc: fsl: qbman: avoid race in clearing QMan interrupt

Geert Uytterhoeven <geert+renesas@glider.be>
    arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

Tony Lindgren <tony@atomide.com>
    ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

Ian Kent <raven@themaw.net>
    autofs: fix error return in autofs_fill_super()

Pan Bian <bianpan2016@163.com>
    autofs: drop dentry reference only when it is never used

Jan Kara <jack@suse.cz>
    fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()

Dan Carpenter <dan.carpenter@oracle.com>
    lib/test_kmod.c: potential double free in error handling

Mikhail Zaslonko <zaslonko@linux.ibm.com>
    mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone

Michal Hocko <mhocko@suse.com>
    mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone

Qian Cai <cai@lca.pw>
    x86_64: increase stack size for KASAN_EXTRA

Kairui Song <kasong@redhat.com>
    x86/kexec: Don't setup EFI info if EFI runtime is not enabled

John Johansen <john.johansen@canonical.com>
    apparmor: Fix aa_label_build() error handling for failed merges

James Morse <james.morse@arm.com>
    arm64: kprobe: Always blacklist the KVM world-switch code

Thomas Lendacky <Thomas.Lendacky@amd.com>
    x86/microcode/amd: Don't falsely trick the late loading mechanism

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix computation for MAX_SMB2_HDR_SIZE

Sinan Kaya <okaya@kernel.org>
    platform/x86: Fix unmet dependency warning for SAMSUNG_Q10

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: 53c700: pass correct "dev" to dma_alloc_attrs()

Ming Lu <ming.lu@citrix.com>
    scsi: libfc: free skb when receiving invalid flogi resp

Manish Chopra <manishc@marvell.com>
    qed: Fix stack out of bounds bug

Manish Chopra <manishc@marvell.com>
    qed: Fix system crash in ll2 xmit

Manish Chopra <manishc@marvell.com>
    qed: Fix VF probe failure while FLR

Manish Chopra <manishc@marvell.com>
    qed: Fix LACP pdu drops for VFs

Manish Chopra <manishc@marvell.com>
    qed: Fix bug in tx promiscuous mode settings

Yao Liu <yotta.liu@ucloud.cn>
    nfs: Fix NULL pointer dereference of dev_name

Fathi Boudra <fathi.boudra@linaro.org>
    selftests: timers: use LDLIBS instead of LDFLAGS

Andrew Lunn <andrew@lunn.ch>
    gpio: vf610: Mask all GPIO interrupts

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present

Alexey Khoroshilov <khoroshilov@ispras.ru>
    net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Fix wrong read accesses via Clause 45 MDIO protocol

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Restart autoneg need return failed when autoneg off

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Fix for missing of_node_put() after of_parse_phandle()

Tomonori Sakita <tomonori.sakita@sord.co.jp>
    net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: limit number of possible CPUs by NR_CPUS

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: mark each possible CPU as present

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: smp_lx200_defconfig: fix vectors clash

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: fix secondary CPU initialization

Colin Ian King <colin.king@canonical.com>
    selftests: cpu-hotplug: fix case where CPUs offline > CPUs present

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: fix ccount_timer_shutdown

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Fix IOMMU page flush when detach device from a domain

ZhangXiaoxu <zhangxiaoxu5@huawei.com>
    ipvs: Fix signed integer overflow when setsockopt timeout

Jerry Snitselaar <jsnitsel@redhat.com>
    iommu/amd: Unmap all mapped pages in error path of map_sg

Jerry Snitselaar <jsnitsel@redhat.com>
    iommu/amd: Call free_iova_fast with pfn in map_sg

Brian Welty <brian.welty@intel.com>
    IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM

Stephane Eranian <eranian@google.com>
    perf tools: Handle TOPOLOGY headers with no CPU

Stephane Eranian <eranian@google.com>
    perf core: Fix perf_proc_update_handler() bug

Su Yanjun <suyj.fnst@cn.fujitsu.com>
    vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel

Alistair Strachan <astrachan@google.com>
    media: uvcvideo: Fix 'type' check leading to overflow

Martin Wilck <mwilck@suse.com>
    scsi: core: reset host byte in DID_NEXUS_FAILURE case

YueHaibing <yuehaibing@huawei.com>
    exec: Fix mem leak in kernel_read_file

Matthias Kaehlcke <mka@chromium.org>
    Bluetooth: Fix locking in bt_accept_enqueue() for BH context

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: fix get_wchan

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlbfs: fix races and page leaks during migration

Liu Xiang <liu.xiang6@zte.com.cn>
    MIPS: irq: Allocate accurate order pages for irq stack

Gustavo A. R. Silva <gustavo@embeddedor.com>
    applicom: Fix potential Spectre v1 vulnerabilities

Jiaxun Yang <jiaxun.yang@flygoat.com>
    x86/CPU/AMD: Set the CPB bit unconditionally on F17h

Andrew Lunn <andrew@lunn.ch>
    net: dsa: mv88e6xxx: Fix statistics on mv88e6161

Rajasingh Thavamani <T.Rajasingh@landisgyr.com>
    net: phy: Micrel KSZ8061: link failure after cable connect

Timur Celik <mail@timurcelik.de>
    tun: remove unnecessary memory barrier

Timur Celik <mail@timurcelik.de>
    tun: fix blocking read

David Ahern <dsahern@gmail.com>
    mpls: Return error for RTA_GATEWAY attribute

David Ahern <dsahern@gmail.com>
    ipv6: Return error for RTA_VIA attribute

David Ahern <dsahern@gmail.com>
    ipv4: Return error for RTA_VIA attribute

Nazarov Sergey <s-nazarov@yandex.ru>
    net: avoid use IPCB in cipso_v4_error

Nazarov Sergey <s-nazarov@yandex.ru>
    net: Add __icmp_send helper.

Igor Druzhinin <igor.druzhinin@citrix.com>
    xen-netback: fix occasional leak of grant ref mappings under memory pressure

Igor Druzhinin <igor.druzhinin@citrix.com>
    xen-netback: don't populate the hash cache on XenBus disconnect

Eric Biggers <ebiggers@google.com>
    net: socket: set sock->sk to NULL after calling proto_ops::release()

Mao Wenan <maowenan@huawei.com>
    net: sit: fix memory leak in sit_init_net()

Heiner Kallweit <hkallweit1@gmail.com>
    net: phy: phylink: fix uninitialized variable in phylink_get_mac_state

YueHaibing <yuehaibing@huawei.com>
    net: nfc: Fix NULL dereference on nfc_llcp_build_tlv fails

Sheng Lan <lansheng@huawei.com>
    net: netem: fix skb length BUG_ON in __skb_to_sgvec

Paul Moore <paul@paul-moore.com>
    netlabel: fix out-of-bounds memory accesses

Andrew Lunn <andrew@lunn.ch>
    net: dsa: mv88e6xxx: Fix u64 statistics

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Fix IP header checksum for coalesced packets

Jiri Benc <jbenc@redhat.com>
    geneve: correctly handle ipv6.disable module parameter

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Drop oversize TX packets to prevent errors.

Erik Hugne <erik.hugne@gmail.com>
    tipc: fix RDM/DGRAM connect() regression

Ido Schimmel <idosch@mellanox.com>
    team: Free BPF filter when unregistering netdev

Kai-Heng Feng <kai.heng.feng@canonical.com>
    sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79

YueHaibing <yuehaibing@huawei.com>
    net-sysfs: Fix mem leak in netdev_register_kobject

Heiner Kallweit <hkallweit1@gmail.com>
    net: dsa: mv88e6xxx: handle unknown duplex modes gracefully in mv88e6xxx_port_set_duplex

Ido Schimmel <idosch@mellanox.com>
    ip6mr: Do not call __IP6_INC_STATS() from preemptible context

Qing Xia <saberlily.xia@hisilicon.com>
    staging: android: ion: fix sys heap pool's gfp_flags

Ajay Singh <ajay.kathat@microchip.com>
    staging: wilc1000: fix to set correct value for 'vif_num'

Gustavo A. R. Silva <gustavo@embeddedor.com>
    staging: comedi: ni_660x: fix missing break in switch statement

Mans Rullgard <mans@mansr.com>
    USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485

Ivan Mironov <mironov.ivan@gmail.com>
    USB: serial: cp210x: add ID for Ingenico 3070

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit ME910 ECM composition

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: Use struct kobj_attribute instead of struct global_attr


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/exynos3250.dtsi                  |   3 +
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |  13 +-
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi     |   2 +-
 arch/arm/kernel/entry-common.S                     |   4 +-
 arch/arm/plat-pxa/ssp.c                            |   3 -
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |   1 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |   2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi           |   3 +
 arch/arm64/kernel/probes/kprobes.c                 |   6 +-
 arch/mips/Kconfig                                  |  15 +
 arch/mips/boot/dts/ingenic/ci20.dts                |   8 +-
 arch/mips/include/asm/atomic.h                     |   6 +
 arch/mips/include/asm/barrier.h                    |  36 +
 arch/mips/include/asm/bitops.h                     |   5 +
 arch/mips/include/asm/futex.h                      |   3 +
 arch/mips/include/asm/pgtable.h                    |   2 +
 arch/mips/kernel/irq.c                             |   4 +-
 arch/mips/kernel/process.c                         |   7 +-
 arch/mips/loongson64/Platform                      |  23 +
 arch/mips/mm/tlbex.c                               |  10 +
 arch/x86/events/core.c                             |  13 +-
 arch/x86/events/intel/core.c                       | 154 ++++-
 arch/x86/events/perf_event.h                       |  17 +-
 arch/x86/include/asm/cpufeatures.h                 |   1 +
 arch/x86/include/asm/msr-index.h                   |   6 +
 arch/x86/include/asm/page_64_types.h               |   4 +
 arch/x86/kernel/cpu/amd.c                          |   8 +-
 arch/x86/kernel/cpu/microcode/amd.c                |   2 +-
 arch/x86/kernel/kexec-bzimage64.c                  |   3 +
 arch/xtensa/configs/smp_lx200_defconfig            |   1 +
 arch/xtensa/kernel/head.S                          |   5 +-
 arch/xtensa/kernel/process.c                       |   4 +-
 arch/xtensa/kernel/smp.c                           |  41 +-
 arch/xtensa/kernel/time.c                          |   2 +-
 drivers/base/dd.c                                  |   2 +-
 drivers/char/applicom.c                            |  35 +-
 drivers/cpufreq/cpufreq.c                          |   6 +-
 drivers/cpufreq/intel_pstate.c                     |  18 +-
 drivers/dma/at_xdmac.c                             |  19 +-
 drivers/dma/dmatest.c                              |  28 +-
 drivers/firmware/iscsi_ibft.c                      |   1 +
 drivers/gpio/gpio-vf610.c                          |   5 +
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 |   2 +
 drivers/i2c/busses/i2c-omap.c                      |  13 +-
 drivers/infiniband/hw/hfi1/ud.c                    |   1 -
 drivers/infiniband/hw/qib/qib_ud.c                 |   1 -
 drivers/input/mouse/elan_i2c_core.c                |   1 +
 drivers/input/tablet/wacom_serial4.c               |   2 +
 drivers/iommu/amd_iommu.c                          |  19 +-
 drivers/irqchip/irq-mmp.c                          |   6 +-
 drivers/media/usb/uvc/uvc_driver.c                 |  14 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |   4 +-
 drivers/net/dsa/mv88e6xxx/port.c                   |   2 +-
 drivers/net/ethernet/altera/altera_msgdma.c        |   3 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   6 +
 drivers/net/ethernet/hisilicon/hns/hns_enet.c      |   5 +
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |  16 +-
 drivers/net/ethernet/hisilicon/hns_mdio.c          |   2 +-
 drivers/net/ethernet/marvell/sky2.c                |  24 +-
 drivers/net/ethernet/qlogic/qed/qed_dev.c          |   8 +-
 drivers/net/ethernet/qlogic/qed/qed_l2.c           |  17 +-
 drivers/net/ethernet/qlogic/qed/qed_l2.h           |   3 +
 drivers/net/ethernet/qlogic/qed/qed_ll2.c          |  20 +-
 drivers/net/ethernet/qlogic/qed/qed_sp.h           |   1 +
 drivers/net/ethernet/qlogic/qed/qed_spq.c          |  15 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        |  10 +-
 drivers/net/ethernet/qlogic/qed/qed_vf.c           |  10 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     |   4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |  14 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  17 +-
 drivers/net/geneve.c                               |  11 +-
 drivers/net/hyperv/netvsc_drv.c                    |  22 +-
 drivers/net/phy/micrel.c                           |  13 +-
 drivers/net/phy/phylink.c                          |   4 +
 drivers/net/team/team_mode_loadbalance.c           |  15 +
 drivers/net/tun.c                                  |   4 +-
 drivers/net/wireless/ath/ath9k/init.c              |   6 +-
 drivers/net/xen-netback/hash.c                     |   2 +
 drivers/net/xen-netback/interface.c                |   7 +
 drivers/net/xen-netback/netback.c                  |  10 +-
 drivers/platform/x86/Kconfig                       |   1 +
 drivers/s390/net/qeth_core_main.c                  |  15 +-
 drivers/scsi/53c700.c                              |   2 +-
 drivers/scsi/aacraid/commsup.c                     |   5 +-
 drivers/scsi/libfc/fc_lport.c                      |   6 +-
 drivers/scsi/scsi_lib.c                            |   1 +
 drivers/soc/fsl/qbman/qman.c                       |   9 +-
 drivers/staging/android/ion/ion_system_heap.c      |   2 +-
 drivers/staging/comedi/drivers/ni_660x.c           |   1 +
 drivers/staging/wilc1000/linux_wlan.c              |   4 +-
 drivers/usb/phy/Kconfig                            |   2 +-
 drivers/usb/serial/cp210x.c                        |   1 +
 drivers/usb/serial/ftdi_sio.c                      |   2 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   6 +
 drivers/usb/serial/option.c                        |   2 +
 fs/autofs4/expire.c                                |   3 +-
 fs/autofs4/inode.c                                 |   4 +-
 fs/buffer.c                                        |  19 +-
 fs/cifs/smb2pdu.h                                  |   4 +-
 fs/drop_caches.c                                   |   8 +-
 fs/exec.c                                          |   2 +-
 fs/gfs2/glock.c                                    |   2 +-
 fs/hugetlbfs/inode.c                               |  12 +
 fs/nfs/super.c                                     |   5 +
 include/drm/drm_cache.h                            |  18 +
 include/linux/cpufreq.h                            |  12 +-
 include/linux/irqchip/arm-gic-v3.h                 |   2 +-
 include/linux/stmmac.h                             |   1 +
 include/net/bluetooth/bluetooth.h                  |   2 +-
 include/net/icmp.h                                 |   9 +-
 include/net/ip.h                                   |   2 +
 kernel/bpf/hashtab.c                               |   4 +-
 kernel/bpf/percpu_freelist.c                       |  41 +-
 kernel/bpf/percpu_freelist.h                       |   4 +
 kernel/events/core.c                               |  14 +-
 kernel/relay.c                                     |   4 +-
 lib/test_kmod.c                                    |   2 +-
 mm/hugetlb.c                                       |  16 +-
 mm/memory_hotplug.c                                |   6 +-
 mm/migrate.c                                       |  11 +
 net/bluetooth/af_bluetooth.c                       |  16 +-
 net/bluetooth/l2cap_sock.c                         |   2 +-
 net/bluetooth/rfcomm/sock.c                        |   2 +-
 net/bluetooth/sco.c                                |   2 +-
 net/bridge/netfilter/ebtables.c                    |   9 +-
 net/core/filter.c                                  |   2 +
 net/core/net-sysfs.c                               |   3 +
 net/ipv4/cipso_ipv4.c                              |  20 +-
 net/ipv4/fib_frontend.c                            |   4 +
 net/ipv4/icmp.c                                    |   7 +-
 net/ipv4/ip_options.c                              |  22 +-
 net/ipv4/ip_vti.c                                  |  50 ++
 net/ipv6/ip6mr.c                                   |   8 +-
 net/ipv6/route.c                                   |   4 +
 net/ipv6/sit.c                                     |   1 +
 net/mpls/af_mpls.c                                 |   3 +
 net/netfilter/ipvs/ip_vs_ctl.c                     |  12 +
 net/netfilter/nf_conntrack_core.c                  |  16 +
 net/netlabel/netlabel_kapi.c                       |   3 +-
 net/nfc/llcp_commands.c                            |  20 +
 net/nfc/llcp_core.c                                |  24 +-
 net/sched/sch_netem.c                              |  10 +-
 net/socket.c                                       |   1 +
 net/tipc/socket.c                                  |   2 +-
 net/vmw_vsock/virtio_transport.c                   |  29 +-
 security/apparmor/domain.c                         |   5 +-
 tools/perf/builtin-trace.c                         |  25 +-
 tools/perf/util/cpumap.c                           |  11 +-
 tools/perf/util/symbol-elf.c                       |   9 +-
 tools/testing/selftests/bpf/bpf_util.h             |  30 +-
 .../selftests/cpu-hotplug/cpu-on-off-test.sh       |  13 +-
 tools/testing/selftests/netfilter/Makefile         |   2 +-
 tools/testing/selftests/netfilter/config           |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh       | 762 +++++++++++++++++++++
 tools/testing/selftests/timers/Makefile            |   2 +-
 156 files changed, 1893 insertions(+), 375 deletions(-)

[PATCH 4.14 001/135] cpufreq: Use struct kobj_attribute instead of struct global_attr

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 625c85a62cb7d3c79f6e16de3cfa972033658250 upstream.

The cpufreq_global_kobject is created using kobject_create_and_add()
helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store
routines are set to kobj_attr_show() and kobj_attr_store().

These routines pass struct kobj_attribute as an argument to the
show/store callbacks. But all the cpufreq files created using the
cpufreq_global_kobject expect the argument to be of type struct
attribute. Things work fine currently as no one accesses the "attr"
argument. We may not see issues even if the argument is used, as struct
kobj_attribute has struct attribute as its first element and so they
will both get same address.

But this is logically incorrect and we should rather use struct
kobj_attribute instead of struct global_attr in the cpufreq core and
drivers and the show/store callbacks should take struct kobj_attribute
as argument instead.

This bug is caught using CFI CLANG builds in android kernel which
catches mismatch in function prototypes for such callbacks.

Reported-by: Donghee Han <dh.han@samsung.com>
Reported-by: Sangkyu Kim <skwith.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/cpufreq.c      |    6 +++---
 drivers/cpufreq/intel_pstate.c |   18 +++++++++---------
 include/linux/cpufreq.h        |   12 ++----------
 3 files changed, 14 insertions(+), 22 deletions(-)

--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -554,13 +554,13 @@ EXPORT_SYMBOL_GPL(cpufreq_policy_transit
  *                          SYSFS INTERFACE                          *
  *********************************************************************/
 static ssize_t show_boost(struct kobject *kobj,
-				 struct attribute *attr, char *buf)
+			  struct kobj_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled);
 }
 
-static ssize_t store_boost(struct kobject *kobj, struct attribute *attr,
-				  const char *buf, size_t count)
+static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr,
+			   const char *buf, size_t count)
 {
 	int ret, enable;
 
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -811,7 +811,7 @@ static void intel_pstate_update_policies
 /************************** sysfs begin ************************/
 #define show_one(file_name, object)					\
 	static ssize_t show_##file_name					\
-	(struct kobject *kobj, struct attribute *attr, char *buf)	\
+	(struct kobject *kobj, struct kobj_attribute *attr, char *buf)	\
 	{								\
 		return sprintf(buf, "%u\n", global.object);		\
 	}
@@ -820,7 +820,7 @@ static ssize_t intel_pstate_show_status(
 static int intel_pstate_update_status(const char *buf, size_t size);
 
 static ssize_t show_status(struct kobject *kobj,
-			   struct attribute *attr, char *buf)
+			   struct kobj_attribute *attr, char *buf)
 {
 	ssize_t ret;
 
@@ -831,7 +831,7 @@ static ssize_t show_status(struct kobjec
 	return ret;
 }
 
-static ssize_t store_status(struct kobject *a, struct attribute *b,
+static ssize_t store_status(struct kobject *a, struct kobj_attribute *b,
 			    const char *buf, size_t count)
 {
 	char *p = memchr(buf, '\n', count);
@@ -845,7 +845,7 @@ static ssize_t store_status(struct kobje
 }
 
 static ssize_t show_turbo_pct(struct kobject *kobj,
-				struct attribute *attr, char *buf)
+				struct kobj_attribute *attr, char *buf)
 {
 	struct cpudata *cpu;
 	int total, no_turbo, turbo_pct;
@@ -871,7 +871,7 @@ static ssize_t show_turbo_pct(struct kob
 }
 
 static ssize_t show_num_pstates(struct kobject *kobj,
-				struct attribute *attr, char *buf)
+				struct kobj_attribute *attr, char *buf)
 {
 	struct cpudata *cpu;
 	int total;
@@ -892,7 +892,7 @@ static ssize_t show_num_pstates(struct k
 }
 
 static ssize_t show_no_turbo(struct kobject *kobj,
-			     struct attribute *attr, char *buf)
+			     struct kobj_attribute *attr, char *buf)
 {
 	ssize_t ret;
 
@@ -914,7 +914,7 @@ static ssize_t show_no_turbo(struct kobj
 	return ret;
 }
 
-static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
+static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 			      const char *buf, size_t count)
 {
 	unsigned int input;
@@ -961,7 +961,7 @@ static ssize_t store_no_turbo(struct kob
 	return count;
 }
 
-static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
 				  const char *buf, size_t count)
 {
 	unsigned int input;
@@ -991,7 +991,7 @@ static ssize_t store_max_perf_pct(struct
 	return count;
 }
 
-static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b,
 				  const char *buf, size_t count)
 {
 	unsigned int input;
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -254,20 +254,12 @@ __ATTR(_name, 0644, show_##_name, store_
 static struct freq_attr _name =			\
 __ATTR(_name, 0200, NULL, store_##_name)
 
-struct global_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *kobj,
-			struct attribute *attr, char *buf);
-	ssize_t (*store)(struct kobject *a, struct attribute *b,
-			 const char *c, size_t count);
-};
-
 #define define_one_global_ro(_name)		\
-static struct global_attr _name =		\
+static struct kobj_attribute _name =		\
 __ATTR(_name, 0444, show_##_name, NULL)
 
 #define define_one_global_rw(_name)		\
-static struct global_attr _name =		\
+static struct kobj_attribute _name =		\
 __ATTR(_name, 0644, show_##_name, store_##_name)
 
 

[PATCH 4.14 002/135] USB: serial: option: add Telit ME910 ECM composition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

commit 6431866b6707d27151be381252d6eef13025cfce upstream.

This patch adds Telit ME910 family ECM composition 0x1102.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1151,6 +1151,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
 	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff),	/* Telit ME910 (ECM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

[PATCH 4.14 003/135] USB: serial: cp210x: add ID for Ingenico 3070

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Mironov <mironov.ivan@gmail.com>

commit dd9d3d86b08d6a106830364879c42c78db85389c upstream.

Here is how this device appears in kernel log:

	usb 3-1: new full-speed USB device number 18 using xhci_hcd
	usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
	usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
	usb 3-1: Product: Ingenico 3070
	usb 3-1: Manufacturer: Silicon Labs
	usb 3-1: SerialNumber: 0001

Apparently this is a POS terminal with embedded USB-to-Serial converter.

Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -64,6 +64,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+	{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
 	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */

[PATCH 4.14 004/135] USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mans Rullgard <mans@mansr.com>

commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream.

This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1020,6 +1020,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
 	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
+	/* EZPrototypes devices */
+	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1309,6 +1309,12 @@
 #define IONICS_PLUGCOMPUTER_PID		0x0102
 
 /*
+ * EZPrototypes (PID reseller)
+ */
+#define EZPROTOTYPES_VID		0x1c40
+#define HJELMSLUND_USB485_ISO_PID	0x0477
+
+/*
  * Dresden Elektronik Sensor Terminal Board
  */
 #define DE_VID			0x1cf1 /* Vendor ID */

[PATCH 4.14 005/135] staging: comedi: ni_660x: fix missing break in switch statement

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 479826cc86118e0d87e5cefb3df5b748e0480924 upstream.

Add missing break statement in order to prevent the code from falling
through to the default case and return -EINVAL every time.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: aa94f2888825 ("staging: comedi: ni_660x: tidy up ni_660x_set_pfi_routing()")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_660x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -611,6 +611,7 @@ static int ni_660x_set_pfi_routing(struc
 	case NI_660X_PFI_OUTPUT_DIO:
 		if (chan > 31)
 			return -EINVAL;
+		break;
 	default:
 		return -EINVAL;
 	}

[PATCH 4.14 006/135] staging: wilc1000: fix to set correct value for vif_num

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ajay Singh <ajay.kathat@microchip.com>

commit dda037057a572f5c82ac2499eb4e6fb17600ba3e upstream.

Set correct value in '->vif_num' for the total number of interfaces and
set '->idx' value using 'i'.

Fixes: 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses")
Fixes: 0e490657c721 ("staging: wilc1000: Fix problem with wrong vif index")
Cc: <stable@vger.kernel.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wilc1000/linux_wlan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -1238,8 +1238,8 @@ int wilc_netdev_init(struct wilc **wilc,
 		vif->wilc = *wilc;
 		vif->ndev = ndev;
 		wl->vif[i] = vif;
-		wl->vif_num = i;
-		vif->idx = wl->vif_num;
+		wl->vif_num = i + 1;
+		vif->idx = i;
 
 		ndev->netdev_ops = &wilc_netdev_ops;
 

[PATCH 4.14 007/135] staging: android: ion: fix sys heap pools gfp_flags

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qing Xia <saberlily.xia@hisilicon.com>

commit 9bcf065e28122588a6cbee08cf847826dacbb438 upstream.

In the first loop, gfp_flags will be modified to high_order_gfp_flags,
and there will be no chance to change back to low_order_gfp_flags.

Fixes: e7f63771b60e ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc")
Signed-off-by: Qing Xia <saberlily.xia@hisilicon.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Reviewed-by: Yuming Han <yuming.han@unisoc.com>
Reviewed-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: Orson Zhai <orson.zhai@unisoc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ion/ion_system_heap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/android/ion/ion_system_heap.c
+++ b/drivers/staging/android/ion/ion_system_heap.c
@@ -298,10 +298,10 @@ static int ion_system_heap_create_pools(
 					bool cached)
 {
 	int i;
-	gfp_t gfp_flags = low_order_gfp_flags;
 
 	for (i = 0; i < NUM_ORDERS; i++) {
 		struct ion_page_pool *pool;
+		gfp_t gfp_flags = low_order_gfp_flags;
 
 		if (orders[i] > 4)
 			gfp_flags = high_order_gfp_flags;

[PATCH 4.14 008/135] ip6mr: Do not call __IP6_INC_STATS() from preemptible context

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 87c11f1ddbbad38ad8bad47af133a8208985fbdf ]

Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.

Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].

Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.

[1]
[  157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[  157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[  157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[  157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  157.460461] Call Trace:
[  157.460486]  dump_stack+0xf9/0x1be
[  157.460553]  check_preemption_disabled+0x1d6/0x200
[  157.460576]  ip6mr_forward2+0x73e/0x10e0
[  157.460705]  ip6_mr_forward+0x9a0/0x1510
[  157.460771]  ip6mr_mfc_add+0x16b3/0x1e00
[  157.461155]  ip6_mroute_setsockopt+0x3cb/0x13c0
[  157.461384]  do_ipv6_setsockopt.isra.8+0x348/0x4060
[  157.462013]  ipv6_setsockopt+0x90/0x110
[  157.462036]  rawv6_setsockopt+0x4a/0x120
[  157.462058]  __sys_setsockopt+0x16b/0x340
[  157.462198]  __x64_sys_setsockopt+0xbf/0x160
[  157.462220]  do_syscall_64+0x14d/0x610
[  157.462349]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6mr.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -2002,10 +2002,10 @@ int ip6mr_compat_ioctl(struct sock *sk,
 
 static inline int ip6mr_forward2_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
-	__IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
-			IPSTATS_MIB_OUTFORWDATAGRAMS);
-	__IP6_ADD_STATS(net, ip6_dst_idev(skb_dst(skb)),
-			IPSTATS_MIB_OUTOCTETS, skb->len);
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
+		      IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP6_ADD_STATS(net, ip6_dst_idev(skb_dst(skb)),
+		      IPSTATS_MIB_OUTOCTETS, skb->len);
 	return dst_output(net, sk, skb);
 }
 

[PATCH 4.14 009/135] net: dsa: mv88e6xxx: handle unknown duplex modes gracefully in mv88e6xxx_port_set_duplex

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit c6195a8bdfc62a7cecf7df685e64847a4b700275 ]

When testing another issue I faced the problem that
mv88e6xxx_port_setup_mac() failed due to DUPLEX_UNKNOWN being passed
as argument to mv88e6xxx_port_set_duplex(). We should handle this case
gracefully and return -EOPNOTSUPP, like e.g. mv88e6xxx_port_set_speed()
is doing it.

Fixes: 7f1ae07b51e8 ("net: dsa: mv88e6xxx: add port duplex setter")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/port.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -165,7 +165,7 @@ int mv88e6xxx_port_set_duplex(struct mv8
 		/* normal duplex detection */
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);

[PATCH 4.14 010/135] net-sysfs: Fix mem leak in netdev_register_kobject

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 895a5e96dbd6386c8e78e5b78e067dcc67b7f0ab ]

syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
  comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff  ........ .......
  backtrace:
    [<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
    [<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
    [<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
    [<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
    [<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
    [<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
    [<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
    [<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
    [<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
    [<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
    [<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
    [<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000115be9bb>] 0xffffffffffffffff

It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1402,6 +1402,9 @@ static int register_queue_kobjects(struc
 error:
 	netdev_queue_update_kobjects(dev, txq, 0);
 	net_rx_queue_update_kobjects(dev, rxq, 0);
+#ifdef CONFIG_SYSFS
+	kset_unregister(dev->queues_kset);
+#endif
 	return error;
 }
 

[PATCH 4.14 011/135] sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit b33b7cd6fd86478dd2890a9abeb6f036aa01fdf7 ]

Some sky2 chips fire IRQ after S3, before the driver is fully resumed:
[ 686.804877] do_IRQ: 1.37 No irq handler for vector

This is likely a platform bug that device isn't fully quiesced during
S3. Use MSI-X, maskable MSI or INTx can prevent this issue from
happening.

Since MSI-X and maskable MSI are not supported by this device, fallback
to use INTx on affected platforms.

BugLink: https://bugs.launchpad.net/bugs/1807259
BugLink: https://bugs.launchpad.net/bugs/1809843
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/sky2.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -46,6 +46,7 @@
 #include <linux/mii.h>
 #include <linux/of_device.h>
 #include <linux/of_net.h>
+#include <linux/dmi.h>
 
 #include <asm/irq.h>
 
@@ -93,7 +94,7 @@ static int copybreak __read_mostly = 128
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
-static int disable_msi = 0;
+static int disable_msi = -1;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
@@ -4931,6 +4932,24 @@ static const char *sky2_name(u8 chipid,
 	return buf;
 }
 
+static const struct dmi_system_id msi_blacklist[] = {
+	{
+		.ident = "Dell Inspiron 1545",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
+		},
+	},
+	{
+		.ident = "Gateway P-79",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
+		},
+	},
+	{}
+};
+
 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev, *dev1;
@@ -5042,6 +5061,9 @@ static int sky2_probe(struct pci_dev *pd
 		goto err_out_free_pci;
 	}
 
+	if (disable_msi == -1)
+		disable_msi = !!dmi_check_system(msi_blacklist);
+
 	if (!disable_msi && pci_enable_msi(pdev) == 0) {
 		err = sky2_test_msi(hw);
 		if (err) {

[PATCH 4.14 012/135] team: Free BPF filter when unregistering netdev

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 692c31bd4054212312396b1d303bffab2c5b93a7 ]

When team is used in loadbalance mode a BPF filter can be used to
provide a hash which will determine the Tx port.

When the netdev is later unregistered the filter is not freed which
results in memory leaks [1].

Fix by freeing the program and the corresponding filter when
unregistering the netdev.

[1]
unreferenced object 0xffff8881dbc47cc8 (size 16):
  comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s)
  hex dump (first 16 bytes):
    a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff  ..kkkkkk........
  backtrace:
    [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
    [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
    [<00000000610ef838>] genl_rcv_msg+0xca/0x170
    [<00000000a281df93>] netlink_rcv_skb+0x132/0x380
    [<000000004d9448a2>] genl_rcv+0x29/0x40
    [<000000000321b2f4>] netlink_unicast+0x4c0/0x690
    [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
    [<00000000068298c5>] sock_sendmsg+0xc8/0x110
    [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
    [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
    [<0000000027c5f11a>] do_syscall_64+0x14d/0x610
    [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000e23197e2>] 0xffffffffffffffff
unreferenced object 0xffff8881e182a588 (size 2048):
  comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s)
  hex dump (first 32 bytes):
    20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff   .......0...(...
    07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00  ........(.......
  backtrace:
    [<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0
    [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
    [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
    [<00000000610ef838>] genl_rcv_msg+0xca/0x170
    [<00000000a281df93>] netlink_rcv_skb+0x132/0x380
    [<000000004d9448a2>] genl_rcv+0x29/0x40
    [<000000000321b2f4>] netlink_unicast+0x4c0/0x690
    [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
    [<00000000068298c5>] sock_sendmsg+0xc8/0x110
    [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
    [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
    [<0000000027c5f11a>] do_syscall_64+0x14d/0x610
    [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000e23197e2>] 0xffffffffffffffff

Fixes: 01d7f30a9f96 ("team: add loadbalance mode")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team_mode_loadbalance.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/drivers/net/team/team_mode_loadbalance.c
+++ b/drivers/net/team/team_mode_loadbalance.c
@@ -319,6 +319,20 @@ static int lb_bpf_func_set(struct team *
 	return 0;
 }
 
+static void lb_bpf_func_free(struct team *team)
+{
+	struct lb_priv *lb_priv = get_lb_priv(team);
+	struct bpf_prog *fp;
+
+	if (!lb_priv->ex->orig_fprog)
+		return;
+
+	__fprog_destroy(lb_priv->ex->orig_fprog);
+	fp = rcu_dereference_protected(lb_priv->fp,
+				       lockdep_is_held(&team->lock));
+	bpf_prog_destroy(fp);
+}
+
 static int lb_tx_method_get(struct team *team, struct team_gsetter_ctx *ctx)
 {
 	struct lb_priv *lb_priv = get_lb_priv(team);
@@ -633,6 +647,7 @@ static void lb_exit(struct team *team)
 
 	team_options_unregister(team, lb_options,
 				ARRAY_SIZE(lb_options));
+	lb_bpf_func_free(team);
 	cancel_delayed_work_sync(&lb_priv->ex->stats.refresh_dw);
 	free_percpu(lb_priv->pcpu_stats);
 	kfree(lb_priv->ex);

[PATCH 4.14 013/135] tipc: fix RDM/DGRAM connect() regression

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erik Hugne <erik.hugne@gmail.com>

[ Upstream commit 0e63208915a8d7590d0a6218dadb2a6a00ac705a ]

Fix regression bug introduced in
commit 365ad353c256 ("tipc: reduce risk of user starvation during link
congestion")

Only signal -EDESTADDRREQ for RDM/DGRAM if we don't have a cached
sockaddr.

Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/socket.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -943,7 +943,7 @@ static int __tipc_sendmsg(struct socket
 
 	if (unlikely(!dest)) {
 		dest = &tsk->peer;
-		if (!syn || dest->family != AF_TIPC)
+		if (!syn && dest->family != AF_TIPC)
 			return -EDESTADDRREQ;
 	}
 

[PATCH 4.14 014/135] bnxt_en: Drop oversize TX packets to prevent errors.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 2b3c6885386020b1b9d92d45e8349637e27d1f66 ]

There have been reports of oversize UDP packets being sent to the
driver to be transmitted, causing error conditions.  The issue is
likely caused by the dst of the SKB switching between 'lo' with
64K MTU and the hardware device with a smaller MTU.  Patches are
being proposed by Mahesh Bandewar <maheshb@google.com> to fix the
issue.

In the meantime, add a quick length check in the driver to prevent
the error.  The driver uses the TX packet size as index to look up an
array to setup the TX BD.  The array is large enough to support all MTU
sizes supported by the driver.  The oversize TX packet causes the
driver to index beyond the array and put garbage values into the
TX BD.  Add a simple check to prevent this.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -447,6 +447,12 @@ normal_tx:
 	}
 
 	length >>= 9;
+	if (unlikely(length >= ARRAY_SIZE(bnxt_lhint_arr))) {
+		dev_warn_ratelimited(&pdev->dev, "Dropped oversize %d bytes TX packet.\n",
+				     skb->len);
+		i = 0;
+		goto tx_dma_error;
+	}
 	flags |= bnxt_lhint_arr[length];
 	txbd->tx_bd_len_flags_type = cpu_to_le32(flags);
 

[PATCH 4.14 015/135] geneve: correctly handle ipv6.disable module parameter

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit cf1c9ccba7308e48a68fa77f476287d9d614e4c7 ]

When IPv6 is compiled but disabled at runtime, geneve_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.

Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.

This is the same fix as what commit d074bf960044 ("vxlan: correctly handle
ipv6.disable module parameter") is doing for vxlan.

Note there's also commit c0a47e44c098 ("geneve: should not call rt6_lookup()
when ipv6 was disabled") which fixes a similar issue but for regular
tunnels, while this patch is needed for metadata based tunnels.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/geneve.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -632,15 +632,20 @@ out:
 static int geneve_open(struct net_device *dev)
 {
 	struct geneve_dev *geneve = netdev_priv(dev);
-	bool ipv6 = !!(geneve->info.mode & IP_TUNNEL_INFO_IPV6);
 	bool metadata = geneve->collect_md;
+	bool ipv4, ipv6;
 	int ret = 0;
 
+	ipv6 = geneve->info.mode & IP_TUNNEL_INFO_IPV6 || metadata;
+	ipv4 = !ipv6 || metadata;
 #if IS_ENABLED(CONFIG_IPV6)
-	if (ipv6 || metadata)
+	if (ipv6) {
 		ret = geneve_sock_add(geneve, true);
+		if (ret < 0 && ret != -EAFNOSUPPORT)
+			ipv4 = false;
+	}
 #endif
-	if (!ret && (!ipv6 || metadata))
+	if (ipv4)
 		ret = geneve_sock_add(geneve, false);
 	if (ret < 0)
 		geneve_sock_release(geneve);

[PATCH 4.14 016/135] hv_netvsc: Fix IP header checksum for coalesced packets

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit bf48648d650db1146b75b9bd358502431e86cf4f ]

Incoming packets may have IP header checksum verified by the host.
They may not have IP header checksum computed after coalescing.
This patch re-compute the checksum when necessary, otherwise the
packets may be dropped, because Linux network stack always checks it.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc_drv.c |   22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -741,6 +741,14 @@ void netvsc_linkstatus_callback(struct h
 	schedule_delayed_work(&ndev_ctx->dwork, 0);
 }
 
+static void netvsc_comp_ipcsum(struct sk_buff *skb)
+{
+	struct iphdr *iph = (struct iphdr *)skb->data;
+
+	iph->check = 0;
+	iph->check = ip_fast_csum(iph, iph->ihl);
+}
+
 static struct sk_buff *netvsc_alloc_recv_skb(struct net_device *net,
 					     struct napi_struct *napi,
 					     const struct ndis_tcp_ip_checksum_info *csum_info,
@@ -764,9 +772,17 @@ static struct sk_buff *netvsc_alloc_recv
 	/* skb is already created with CHECKSUM_NONE */
 	skb_checksum_none_assert(skb);
 
-	/*
-	 * In Linux, the IP checksum is always checked.
-	 * Do L4 checksum offload if enabled and present.
+	/* Incoming packets may have IP header checksum verified by the host.
+	 * They may not have IP header checksum computed after coalescing.
+	 * We compute it here if the flags are set, because on Linux, the IP
+	 * checksum is always checked.
+	 */
+	if (csum_info && csum_info->receive.ip_checksum_value_invalid &&
+	    csum_info->receive.ip_checksum_succeeded &&
+	    skb->protocol == htons(ETH_P_IP))
+		netvsc_comp_ipcsum(skb);
+
+	/* Do L4 checksum offload if enabled and present.
 	 */
 	if (csum_info && (net->features & NETIF_F_RXCSUM)) {
 		if (csum_info->receive.tcp_checksum_succeeded ||

[PATCH 4.14 017/135] net: dsa: mv88e6xxx: Fix u64 statistics

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 6e46e2d821bb22b285ae8187959096b65d063b0d ]

The switch maintains u64 counters for the number of octets sent and
received. These are kept as two u32's which need to be combined.  Fix
the combing, which wrongly worked on u16's.

Fixes: 80c4627b2719 ("dsa: mv88x6xxx: Refactor getting a single statistic")
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -639,7 +639,7 @@ static uint64_t _mv88e6xxx_get_ethtool_s
 	default:
 		return UINT64_MAX;
 	}
-	value = (((u64)high) << 16) | low;
+	value = (((u64)high) << 32) | low;
 	return value;
 }
 

[PATCH 4.14 018/135] netlabel: fix out-of-bounds memory accesses

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 5578de4834fe0f2a34fedc7374be691443396d1f ]

There are two array out-of-bounds memory accesses, one in
cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk().  Both
errors are embarassingly simple, and the fixes are straightforward.

As a FYI for anyone backporting this patch to kernels prior to v4.8,
you'll want to apply the netlbl_bitmap_walk() patch to
cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before
Linux v4.8.

Reported-by: Jann Horn <jannh@google.com>
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/cipso_ipv4.c        |    3 ++-
 net/netlabel/netlabel_kapi.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -667,7 +667,8 @@ static int cipso_v4_map_lvl_valid(const
 	case CIPSO_V4_MAP_PASS:
 		return 0;
 	case CIPSO_V4_MAP_TRANS:
-		if (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL)
+		if ((level < doi_def->map.std->lvl.cipso_size) &&
+		    (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL))
 			return 0;
 		break;
 	}
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -903,7 +903,8 @@ int netlbl_bitmap_walk(const unsigned ch
 		    (state == 0 && (byte & bitmask) == 0))
 			return bit_spot;
 
-		bit_spot++;
+		if (++bit_spot >= bitmap_len)
+			return -1;
 		bitmask >>= 1;
 		if (bitmask == 0) {
 			byte = bitmap[++byte_offset];

[PATCH 4.14 019/135] net: netem: fix skb length BUG_ON in __skb_to_sgvec

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sheng Lan <lansheng@huawei.com>

[ Upstream commit 5845f706388a4cde0f6b80f9e5d33527e942b7d9 ]

It can be reproduced by following steps:
1. virtio_net NIC is configured with gso/tso on
2. configure nginx as http server with an index file bigger than 1M bytes
3. use tc netem to produce duplicate packets and delay:
   tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90%
4. continually curl the nginx http server to get index file on client
5. BUG_ON is seen quickly

[10258690.371129] kernel BUG at net/core/skbuff.c:4028!
[10258690.371748] invalid opcode: 0000 [#1] SMP PTI
[10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G        W         5.0.0-rc6 #2
[10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202
[10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea
[10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002
[10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028
[10258690.372094] FS:  0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000
[10258690.372094] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0
[10258690.372094] Call Trace:
[10258690.372094]  <IRQ>
[10258690.372094]  skb_to_sgvec+0x11/0x40
[10258690.372094]  start_xmit+0x38c/0x520 [virtio_net]
[10258690.372094]  dev_hard_start_xmit+0x9b/0x200
[10258690.372094]  sch_direct_xmit+0xff/0x260
[10258690.372094]  __qdisc_run+0x15e/0x4e0
[10258690.372094]  net_tx_action+0x137/0x210
[10258690.372094]  __do_softirq+0xd6/0x2a9
[10258690.372094]  irq_exit+0xde/0xf0
[10258690.372094]  smp_apic_timer_interrupt+0x74/0x140
[10258690.372094]  apic_timer_interrupt+0xf/0x20
[10258690.372094]  </IRQ>

In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's
linear data size and nonlinear data size, thus BUG_ON triggered.
Because the skb is cloned and a part of nonlinear data is split off.

Duplicate packet is cloned in netem_enqueue() and may be delayed
some time in qdisc. When qdisc len reached the limit and returns
NET_XMIT_DROP, the skb will be retransmit later in write queue.
the skb will be fragmented by tso_fragment(), the limit size
that depends on cwnd and mss decrease, the skb's nonlinear
data will be split off. The length of the skb cloned by netem
will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(),
the BUG_ON trigger.

To fix it, netem returns NET_XMIT_SUCCESS to upper stack
when it clones a duplicate packet.

Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()")
Signed-off-by: Sheng Lan <lansheng@huawei.com>
Reported-by: Qin Ji <jiqin.ji@huawei.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_netem.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -435,6 +435,7 @@ static int netem_enqueue(struct sk_buff
 	int nb = 0;
 	int count = 1;
 	int rc = NET_XMIT_SUCCESS;
+	int rc_drop = NET_XMIT_DROP;
 
 	/* Do not fool qdisc_drop_all() */
 	skb->prev = NULL;
@@ -474,6 +475,7 @@ static int netem_enqueue(struct sk_buff
 		q->duplicate = 0;
 		rootq->enqueue(skb2, rootq, to_free);
 		q->duplicate = dupsave;
+		rc_drop = NET_XMIT_SUCCESS;
 	}
 
 	/*
@@ -486,7 +488,7 @@ static int netem_enqueue(struct sk_buff
 		if (skb_is_gso(skb)) {
 			segs = netem_segment(skb, sch, to_free);
 			if (!segs)
-				return NET_XMIT_DROP;
+				return rc_drop;
 		} else {
 			segs = skb;
 		}
@@ -509,8 +511,10 @@ static int netem_enqueue(struct sk_buff
 			1<<(prandom_u32() % 8);
 	}
 
-	if (unlikely(sch->q.qlen >= sch->limit))
-		return qdisc_drop_all(skb, sch, to_free);
+	if (unlikely(sch->q.qlen >= sch->limit)) {
+		qdisc_drop_all(skb, sch, to_free);
+		return rc_drop;
+	}
 
 	qdisc_qstats_backlog_inc(sch, skb);
 

[PATCH 4.14 020/135] net: nfc: Fix NULL dereference on nfc_llcp_build_tlv fails

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 58bdd544e2933a21a51eecf17c3f5f94038261b5 ]

KASAN report this:

BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc]
Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401

CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 kasan_report+0x171/0x18d mm/kasan/report.c:321
 memcpy+0x1f/0x50 mm/kasan/common.c:130
 nfc_llcp_build_gb+0x37f/0x540 [nfc]
 nfc_llcp_register_device+0x6eb/0xb50 [nfc]
 nfc_register_device+0x50/0x1d0 [nfc]
 nfcsim_device_new+0x394/0x67d [nfcsim]
 ? 0xffffffffc1080000
 nfcsim_init+0x6b/0x1000 [nfcsim]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

nfc_llcp_build_tlv will return NULL on fails, caller should check it,
otherwise will trigger a NULL dereference.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: eda21f16a5ed ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/llcp_commands.c |   20 ++++++++++++++++++++
 net/nfc/llcp_core.c     |   24 ++++++++++++++++++++----
 2 files changed, 40 insertions(+), 4 deletions(-)

--- a/net/nfc/llcp_commands.c
+++ b/net/nfc/llcp_commands.c
@@ -419,6 +419,10 @@ int nfc_llcp_send_connect(struct nfc_llc
 						      sock->service_name,
 						      sock->service_name_len,
 						      &service_name_tlv_length);
+		if (!service_name_tlv) {
+			err = -ENOMEM;
+			goto error_tlv;
+		}
 		size += service_name_tlv_length;
 	}
 
@@ -429,9 +433,17 @@ int nfc_llcp_send_connect(struct nfc_llc
 
 	miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
 				      &miux_tlv_length);
+	if (!miux_tlv) {
+		err = -ENOMEM;
+		goto error_tlv;
+	}
 	size += miux_tlv_length;
 
 	rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+	if (!rw_tlv) {
+		err = -ENOMEM;
+		goto error_tlv;
+	}
 	size += rw_tlv_length;
 
 	pr_debug("SKB size %d SN length %zu\n", size, sock->service_name_len);
@@ -484,9 +496,17 @@ int nfc_llcp_send_cc(struct nfc_llcp_soc
 
 	miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
 				      &miux_tlv_length);
+	if (!miux_tlv) {
+		err = -ENOMEM;
+		goto error_tlv;
+	}
 	size += miux_tlv_length;
 
 	rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+	if (!rw_tlv) {
+		err = -ENOMEM;
+		goto error_tlv;
+	}
 	size += rw_tlv_length;
 
 	skb = llcp_allocate_pdu(sock, LLCP_PDU_CC, size);
--- a/net/nfc/llcp_core.c
+++ b/net/nfc/llcp_core.c
@@ -532,10 +532,10 @@ static u8 nfc_llcp_reserve_sdp_ssap(stru
 
 static int nfc_llcp_build_gb(struct nfc_llcp_local *local)
 {
-	u8 *gb_cur, *version_tlv, version, version_length;
-	u8 *lto_tlv, lto_length;
-	u8 *wks_tlv, wks_length;
-	u8 *miux_tlv, miux_length;
+	u8 *gb_cur, version, version_length;
+	u8 lto_length, wks_length, miux_length;
+	u8 *version_tlv = NULL, *lto_tlv = NULL,
+	   *wks_tlv = NULL, *miux_tlv = NULL;
 	__be16 wks = cpu_to_be16(local->local_wks);
 	u8 gb_len = 0;
 	int ret = 0;
@@ -543,17 +543,33 @@ static int nfc_llcp_build_gb(struct nfc_
 	version = LLCP_VERSION_11;
 	version_tlv = nfc_llcp_build_tlv(LLCP_TLV_VERSION, &version,
 					 1, &version_length);
+	if (!version_tlv) {
+		ret = -ENOMEM;
+		goto out;
+	}
 	gb_len += version_length;
 
 	lto_tlv = nfc_llcp_build_tlv(LLCP_TLV_LTO, &local->lto, 1, &lto_length);
+	if (!lto_tlv) {
+		ret = -ENOMEM;
+		goto out;
+	}
 	gb_len += lto_length;
 
 	pr_debug("Local wks 0x%lx\n", local->local_wks);
 	wks_tlv = nfc_llcp_build_tlv(LLCP_TLV_WKS, (u8 *)&wks, 2, &wks_length);
+	if (!wks_tlv) {
+		ret = -ENOMEM;
+		goto out;
+	}
 	gb_len += wks_length;
 
 	miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&local->miux, 0,
 				      &miux_length);
+	if (!miux_tlv) {
+		ret = -ENOMEM;
+		goto out;
+	}
 	gb_len += miux_length;
 
 	gb_len += ARRAY_SIZE(llcp_magic);

[PATCH 4.14 021/135] net: phy: phylink: fix uninitialized variable in phylink_get_mac_state

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit d25ed413d5e51644e18f66e34eec049f17a7abcb ]

When debugging an issue I found implausible values in state->pause.
Reason in that state->pause isn't initialized and later only single
bits are changed. Also the struct itself isn't initialized in
phylink_resolve(). So better initialize state->pause and other
not yet initialized fields.

v2:
- use right function name in subject
v3:
- initialize additional fields

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phylink.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -333,6 +333,10 @@ static int phylink_get_mac_state(struct
 	linkmode_zero(state->lp_advertising);
 	state->interface = pl->link_config.interface;
 	state->an_enabled = pl->link_config.an_enabled;
+	state->speed = SPEED_UNKNOWN;
+	state->duplex = DUPLEX_UNKNOWN;
+	state->pause = MLO_PAUSE_NONE;
+	state->an_complete = 0;
 	state->link = 1;
 
 	return pl->ops->mac_link_state(ndev, state);

[PATCH 4.14 022/135] net: sit: fix memory leak in sit_init_net()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mao Wenan <maowenan@huawei.com>

[ Upstream commit 07f12b26e21ab359261bf75cfcb424fdc7daeb6d ]

If register_netdev() is failed to register sitn->fb_tunnel_dev,
it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).

BUG: memory leak
unreferenced object 0xffff888378daad00 (size 512):
  comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
  hex dump (first 32 bytes):
    00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
backtrace:
    [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
    [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
    [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
    [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
    [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
    [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
    [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
    [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
    [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
    [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
    [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
    [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
    [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
    [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
    [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<0000000039acff8a>] 0xffffffffffffffff

Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/sit.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1856,6 +1856,7 @@ static int __net_init sit_init_net(struc
 
 err_reg_dev:
 	ipip6_dev_free(sitn->fb_tunnel_dev);
+	free_netdev(sitn->fb_tunnel_dev);
 err_alloc_dev:
 	return err;
 }

[PATCH 4.14 023/135] net: socket: set sock->sk to NULL after calling proto_ops::release()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit ff7b11aa481f682e0e9711abfeb7d03f5cd612bf ]

Commit 9060cb719e61 ("net: crypto set sk to NULL when af_alg_release.")
fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is
closed concurrently with fchownat().  However, it ignored that many
other proto_ops::release() methods don't set sock->sk to NULL and
therefore allow the same use-after-free:

    - base_sock_release
    - bnep_sock_release
    - cmtp_sock_release
    - data_sock_release
    - dn_release
    - hci_sock_release
    - hidp_sock_release
    - iucv_sock_release
    - l2cap_sock_release
    - llcp_sock_release
    - llc_ui_release
    - rawsock_release
    - rfcomm_sock_release
    - sco_sock_release
    - svc_release
    - vcc_release
    - x25_release

Rather than fixing all these and relying on every socket type to get
this right forever, just make __sock_release() set sock->sk to NULL
itself after calling proto_ops::release().

Reproducer that produces the KASAN splat when any of these socket types
are configured into the kernel:

    #include <pthread.h>
    #include <stdlib.h>
    #include <sys/socket.h>
    #include <unistd.h>

    pthread_t t;
    volatile int fd;

    void *close_thread(void *arg)
    {
        for (;;) {
            usleep(rand() % 100);
            close(fd);
        }
    }

    int main()
    {
        pthread_create(&t, NULL, close_thread, NULL);
        for (;;) {
            fd = socket(rand() % 50, rand() % 11, 0);
            fchownat(fd, "", 1000, 1000, 0x1000);
            close(fd);
        }
    }

Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/socket.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/socket.c
+++ b/net/socket.c
@@ -600,6 +600,7 @@ static void __sock_release(struct socket
 		if (inode)
 			inode_lock(inode);
 		sock->ops->release(sock);
+		sock->sk = NULL;
 		if (inode)
 			inode_unlock(inode);
 		sock->ops = NULL;

[PATCH 4.14 024/135] xen-netback: dont populate the hash cache on XenBus disconnect

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Druzhinin <igor.druzhinin@citrix.com>

[ Upstream commit a2288d4e355992d369c50c45d017a85f6061ff71 ]

Occasionally, during the disconnection procedure on XenBus which
includes hash cache deinitialization there might be some packets
still in-flight on other processors. Handling of these packets includes
hashing and hash cache population that finally results in hash cache
data structure corruption.

In order to avoid this we prevent hashing of those packets if there
are no queues initialized. In that case RCU protection of queues guards
the hash cache as well.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/hash.c      |    2 ++
 drivers/net/xen-netback/interface.c |    7 +++++++
 2 files changed, 9 insertions(+)

--- a/drivers/net/xen-netback/hash.c
+++ b/drivers/net/xen-netback/hash.c
@@ -435,6 +435,8 @@ void xenvif_init_hash(struct xenvif *vif
 	if (xenvif_hash_cache_size == 0)
 		return;
 
+	BUG_ON(vif->hash.cache.count);
+
 	spin_lock_init(&vif->hash.cache.lock);
 	INIT_LIST_HEAD(&vif->hash.cache.list);
 }
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -153,6 +153,13 @@ static u16 xenvif_select_queue(struct ne
 {
 	struct xenvif *vif = netdev_priv(dev);
 	unsigned int size = vif->hash.size;
+	unsigned int num_queues;
+
+	/* If queues are not set up internally - always return 0
+	 * as the packet going to be dropped anyway */
+	num_queues = READ_ONCE(vif->num_queues);
+	if (num_queues < 1)
+		return 0;
 
 	if (vif->hash.alg == XEN_NETIF_CTRL_HASH_ALGORITHM_NONE)
 		return fallback(dev, skb) % dev->real_num_tx_queues;

[PATCH 4.14 025/135] xen-netback: fix occasional leak of grant ref mappings under memory pressure

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Druzhinin <igor.druzhinin@citrix.com>

[ Upstream commit 99e87f56b48f490fb16b6e0f74691c1e664dea95 ]

Zero-copy callback flag is not yet set on frag list skb at the moment
xenvif_handle_frag_list() returns -ENOMEM. This eventually results in
leaking grant ref mappings since xenvif_zerocopy_callback() is never
called for these fragments. Those eventually build up and cause Xen
to kill Dom0 as the slots get reused for new mappings:

"d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005"

That behavior is observed under certain workloads where sudden spikes
of page cache writes coexist with active atomic skb allocations from
network traffic. Additionally, rework the logic to deal with frag_list
deallocation in a single place.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/netback.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1074,11 +1074,6 @@ static int xenvif_handle_frag_list(struc
 		skb_frag_size_set(&frags[i], len);
 	}
 
-	/* Copied all the bits from the frag list -- free it. */
-	skb_frag_list_init(skb);
-	xenvif_skb_zerocopy_prepare(queue, nskb);
-	kfree_skb(nskb);
-
 	/* Release all the original (foreign) frags. */
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
 		skb_frag_unref(skb, f);
@@ -1147,6 +1142,8 @@ static int xenvif_tx_submit(struct xenvi
 		xenvif_fill_frags(queue, skb);
 
 		if (unlikely(skb_has_frag_list(skb))) {
+			struct sk_buff *nskb = skb_shinfo(skb)->frag_list;
+			xenvif_skb_zerocopy_prepare(queue, nskb);
 			if (xenvif_handle_frag_list(queue, skb)) {
 				if (net_ratelimit())
 					netdev_err(queue->vif->dev,
@@ -1155,6 +1152,9 @@ static int xenvif_tx_submit(struct xenvi
 				kfree_skb(skb);
 				continue;
 			}
+			/* Copied all the bits from the frag list -- free it. */
+			skb_frag_list_init(skb);
+			kfree_skb(nskb);
 		}
 
 		skb->dev      = queue->vif->dev;

[PATCH 4.14 026/135] net: Add __icmp_send helper.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nazarov Sergey <s-nazarov@yandex.ru>

[ Upstream commit 9ef6b42ad6fd7929dd1b6092cb02014e382c6a91 ]

Add __icmp_send function having ip_options struct parameter

Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/icmp.h |    9 ++++++++-
 net/ipv4/icmp.c    |    7 ++++---
 2 files changed, 12 insertions(+), 4 deletions(-)

--- a/include/net/icmp.h
+++ b/include/net/icmp.h
@@ -22,6 +22,7 @@
 
 #include <net/inet_sock.h>
 #include <net/snmp.h>
+#include <net/ip.h>
 
 struct icmp_err {
   int		errno;
@@ -39,7 +40,13 @@ struct net_proto_family;
 struct sk_buff;
 struct net;
 
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info);
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+		 const struct ip_options *opt);
+static inline void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+{
+	__icmp_send(skb_in, type, code, info, &IPCB(skb_in)->opt);
+}
+
 int icmp_rcv(struct sk_buff *skb);
 void icmp_err(struct sk_buff *skb, u32 info);
 int icmp_init(void);
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -573,7 +573,8 @@ relookup_failed:
  *			MUST reply to only the first fragment.
  */
 
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+		 const struct ip_options *opt)
 {
 	struct iphdr *iph;
 	int room;
@@ -694,7 +695,7 @@ void icmp_send(struct sk_buff *skb_in, i
 					  iph->tos;
 	mark = IP4_REPLY_MARK(net, skb_in->mark);
 
-	if (ip_options_echo(net, &icmp_param.replyopts.opt.opt, skb_in))
+	if (__ip_options_echo(net, &icmp_param.replyopts.opt.opt, skb_in, opt))
 		goto out_unlock;
 
 
@@ -747,7 +748,7 @@ out_bh_enable:
 	local_bh_enable();
 out:;
 }
-EXPORT_SYMBOL(icmp_send);
+EXPORT_SYMBOL(__icmp_send);
 
 
 static void icmp_socket_deliver(struct sk_buff *skb, u32 info)

[PATCH 4.14 027/135] net: avoid use IPCB in cipso_v4_error

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nazarov Sergey <s-nazarov@yandex.ru>

[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ]

Extract IP options in cipso_v4_error and use __icmp_send.

Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h      |    2 ++
 net/ipv4/cipso_ipv4.c |   17 +++++++++++++++--
 net/ipv4/ip_options.c |   22 +++++++++++++++++-----
 3 files changed, 34 insertions(+), 7 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -593,6 +593,8 @@ static inline int ip_options_echo(struct
 }
 
 void ip_options_fragment(struct sk_buff *skb);
+int __ip_options_compile(struct net *net, struct ip_options *opt,
+			 struct sk_buff *skb, __be32 *info);
 int ip_options_compile(struct net *net, struct ip_options *opt,
 		       struct sk_buff *skb);
 int ip_options_get(struct net *net, struct ip_options_rcu **optp,
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1736,13 +1736,26 @@ validate_return:
  */
 void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway)
 {
+	unsigned char optbuf[sizeof(struct ip_options) + 40];
+	struct ip_options *opt = (struct ip_options *)optbuf;
+
 	if (ip_hdr(skb)->protocol == IPPROTO_ICMP || error != -EACCES)
 		return;
 
+	/*
+	 * We might be called above the IP layer,
+	 * so we can not use icmp_send and IPCB here.
+	 */
+
+	memset(opt, 0, sizeof(struct ip_options));
+	opt->optlen = ip_hdr(skb)->ihl*4 - sizeof(struct iphdr);
+	if (__ip_options_compile(dev_net(skb->dev), opt, skb, NULL))
+		return;
+
 	if (gateway)
-		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0);
+		__icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0, opt);
 	else
-		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0);
+		__icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0, opt);
 }
 
 /**
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -251,8 +251,9 @@ static void spec_dst_fill(__be32 *spec_d
  * If opt == NULL, then skb->data should point to IP header.
  */
 
-int ip_options_compile(struct net *net,
-		       struct ip_options *opt, struct sk_buff *skb)
+int __ip_options_compile(struct net *net,
+			 struct ip_options *opt, struct sk_buff *skb,
+			 __be32 *info)
 {
 	__be32 spec_dst = htonl(INADDR_ANY);
 	unsigned char *pp_ptr = NULL;
@@ -468,11 +469,22 @@ eol:
 		return 0;
 
 error:
-	if (skb) {
-		icmp_send(skb, ICMP_PARAMETERPROB, 0, htonl((pp_ptr-iph)<<24));
-	}
+	if (info)
+		*info = htonl((pp_ptr-iph)<<24);
 	return -EINVAL;
 }
+
+int ip_options_compile(struct net *net,
+		       struct ip_options *opt, struct sk_buff *skb)
+{
+	int ret;
+	__be32 info;
+
+	ret = __ip_options_compile(net, opt, skb, &info);
+	if (ret != 0 && skb)
+		icmp_send(skb, ICMP_PARAMETERPROB, 0, info);
+	return ret;
+}
 EXPORT_SYMBOL(ip_options_compile);
 
 /*

[PATCH 4.14 028/135] ipv4: Return error for RTA_VIA attribute

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>

[ Upstream commit b6e9e5df4ecf100f6a10ab2ade8e46d47a4b9779 ]

IPv4 currently does not support nexthops outside of the AF_INET family.
Specifically, it does not handle RTA_VIA attribute. If it is passed
in a route add request, the actual route added only uses the device
which is clearly not what the user intended:

  $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
  $ ip ro ls
  ...
  172.16.1.0/24 dev eth0

Catch this and fail the route add:
  $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
  Error: IPv4 does not support RTA_VIA attribute.

Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/fib_frontend.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -675,6 +675,10 @@ static int rtm_to_fib_config(struct net
 		case RTA_GATEWAY:
 			cfg->fc_gw = nla_get_be32(attr);
 			break;
+		case RTA_VIA:
+			NL_SET_ERR_MSG(extack, "IPv4 does not support RTA_VIA attribute");
+			err = -EINVAL;
+			goto errout;
 		case RTA_PRIORITY:
 			cfg->fc_priority = nla_get_u32(attr);
 			break;

[PATCH 4.14 029/135] ipv6: Return error for RTA_VIA attribute

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>

[ Upstream commit e3818541b49fb88650ba339d33cc53e4095da5b3 ]

IPv6 currently does not support nexthops outside of the AF_INET6 family.
Specifically, it does not handle RTA_VIA attribute. If it is passed
in a route add request, the actual route added only uses the device
which is clearly not what the user intended:

  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  $ ip ro ls
  ...
  2001:db8:2::/64 dev eth0 metric 1024 pref medium

Catch this and fail the route add:
  $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
  Error: IPv6 does not support RTA_VIA attribute.

Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3024,6 +3024,10 @@ static int rtm_to_fib6_config(struct sk_
 		cfg->fc_gateway = nla_get_in6_addr(tb[RTA_GATEWAY]);
 		cfg->fc_flags |= RTF_GATEWAY;
 	}
+	if (tb[RTA_VIA]) {
+		NL_SET_ERR_MSG(extack, "IPv6 does not support RTA_VIA attribute");
+		goto errout;
+	}
 
 	if (tb[RTA_DST]) {
 		int plen = (rtm->rtm_dst_len + 7) >> 3;

[PATCH 4.14 030/135] mpls: Return error for RTA_GATEWAY attribute

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>

[ Upstream commit be48220edd48ca0d569782992840488a52373a24 ]

MPLS does not support nexthops with an MPLS address family.
Specifically, it does not handle RTA_GATEWAY attribute. Make it
clear by returning an error.

Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mpls/af_mpls.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -1787,6 +1787,9 @@ static int rtm_to_route_config(struct sk
 				goto errout;
 			break;
 		}
+		case RTA_GATEWAY:
+			NL_SET_ERR_MSG(extack, "MPLS does not support RTA_GATEWAY attribute");
+			goto errout;
 		case RTA_VIA:
 		{
 			if (nla_get_via(nla, &cfg->rc_via_alen,

[PATCH 4.14 031/135] tun: fix blocking read

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Celik <mail@timurcelik.de>

[ Upstream commit 71828b2240692cec0e68b8d867bc00e1745e7fae ]

This patch moves setting of the current state into the loop. Otherwise
the task may end up in a busy wait loop if none of the break conditions
are met.

Signed-off-by: Timur Celik <mail@timurcelik.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1714,9 +1714,9 @@ static struct sk_buff *tun_ring_recv(str
 	}
 
 	add_wait_queue(&tfile->wq.wait, &wait);
-	current->state = TASK_INTERRUPTIBLE;
 
 	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
 		skb = skb_array_consume(&tfile->tx_array);
 		if (skb)
 			break;
@@ -1732,7 +1732,7 @@ static struct sk_buff *tun_ring_recv(str
 		schedule();
 	}
 
-	current->state = TASK_RUNNING;
+	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&tfile->wq.wait, &wait);
 
 out:

[PATCH 4.14 032/135] tun: remove unnecessary memory barrier

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Celik <mail@timurcelik.de>

[ Upstream commit ecef67cb10db7b83b3b71c61dbb29aa070ab0112 ]

Replace set_current_state with __set_current_state since no memory
barrier is needed at this point.

Signed-off-by: Timur Celik <mail@timurcelik.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1732,7 +1732,7 @@ static struct sk_buff *tun_ring_recv(str
 		schedule();
 	}
 
-	set_current_state(TASK_RUNNING);
+	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&tfile->wq.wait, &wait);
 
 out:

[PATCH 4.14 033/135] net: phy: Micrel KSZ8061: link failure after cable connect

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rajasingh Thavamani <T.Rajasingh@landisgyr.com>

[ Upstream commit 232ba3a51cc224b339c7114888ed7f0d4d95695e ]

With Micrel KSZ8061 PHY, the link may occasionally not come up after
Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
sheet 80000688A.pdf descripes the problem and possible workarounds in
detail, see below.
The batch implements workaround 1, which permanently fixes the issue.

DESCRIPTION
Link-up may not occur properly when the Ethernet cable is initially
connected. This issue occurs more commonly when the cable is connected
slowly, but it may occur any time a cable is connected. This issue occurs
in the auto-negotiation circuit, and will not occur if auto-negotiation
is disabled (which requires that the two link partners be set to the
same speed and duplex).

END USER IMPLICATIONS
When this issue occurs, link is not established. Subsequent cable
plug/unplaug cycle will not correct the issue.

WORk AROUND
There are four approaches to work around this issue:
1. This issue can be prevented by setting bit 15 in MMD device address 1,
   register 2, prior to connecting the cable or prior to setting the
   Restart Auto-negotiation bit in register 0h. The MMD registers are
   accessed via the indirect access registers Dh and Eh, or via the Micrel
   EthUtil utility as shown here:
   . if using the EthUtil utility (usually with a Micrel KSZ8061
     Evaluation Board), type the following commands:
     > address 1
     > mmd 1
     > iw 2 b61a
   . Alternatively, write the following registers to write to the
     indirect MMD register:
     Write register Dh, data 0001h
     Write register Eh, data 0002h
     Write register Dh, data 4001h
     Write register Eh, data B61Ah
2. The issue can be avoided by disabling auto-negotiation in the KSZ8061,
   either by the strapping option, or by clearing bit 12 in register 0h.
   Care must be taken to ensure that the KSZ8061 and the link partner
   will link with the same speed and duplex. Note that the KSZ8061
   defaults to full-duplex when auto-negotiation is off, but other
   devices may default to half-duplex in the event of failed
   auto-negotiation.
3. The issue can be avoided by connecting the cable prior to powering-up
   or resetting the KSZ8061, and leaving it plugged in thereafter.
4. If the above measures are not taken and the problem occurs, link can
   be recovered by setting the Restart Auto-Negotiation bit in
   register 0h, or by resetting or power cycling the device. Reset may
   be either hardware reset or software reset (register 0h, bit 15).

PLAN
This errata will not be corrected in the future revision.

Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs")
Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com>
Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/micrel.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -339,6 +339,17 @@ static int ksz8041_config_aneg(struct ph
 	return genphy_config_aneg(phydev);
 }
 
+static int ksz8061_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+	if (ret)
+		return ret;
+
+	return kszphy_config_init(phydev);
+}
+
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
 				       const struct device_node *of_node,
 				       u16 reg,
@@ -938,7 +949,7 @@ static struct phy_driver ksphy_driver[]
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= ksz8061_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,

[PATCH 4.14 034/135] net: dsa: mv88e6xxx: Fix statistics on mv88e6161

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit a6da21bb0eae459a375d5bd48baed821d14301d0 ]

Despite what the datesheet says, the silicon implements the older way
of snapshoting the statistics. Change the op.

Reported-by: Chris.Healy@zii.aero
Tested-by: Chris.Healy@zii.aero
Fixes: 0ac64c394900 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2569,7 +2569,7 @@ static const struct mv88e6xxx_ops mv88e6
 	.port_pause_limit = mv88e6097_port_pause_limit,
 	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
 	.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
-	.stats_snapshot = mv88e6320_g1_stats_snapshot,
+	.stats_snapshot = mv88e6xxx_g1_stats_snapshot,
 	.stats_get_sset_count = mv88e6095_stats_get_sset_count,
 	.stats_get_strings = mv88e6095_stats_get_strings,
 	.stats_get_stats = mv88e6095_stats_get_stats,

[PATCH 4.14 035/135] x86/CPU/AMD: Set the CPB bit unconditionally on F17h

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit 0237199186e7a4aa5310741f0a6498a20c820fd7 upstream.

Some F17h models do not have CPB set in CPUID even though the CPU
supports it. Set the feature bit unconditionally on all F17h.

 [ bp: Rewrite commit message and patch. ]

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181120030018.5185-1-jiaxun.yang@flygoat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/amd.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -791,11 +791,9 @@ static void init_amd_bd(struct cpuinfo_x
 static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
-	/*
-	 * Fix erratum 1076: CPB feature bit not being set in CPUID. It affects
-	 * all up to and including B1.
-	 */
-	if (c->x86_model <= 1 && c->x86_stepping <= 1)
+
+	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
+	if (!cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 

[PATCH 4.14 036/135] applicom: Fix potential Spectre v1 vulnerabilities

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit d7ac3c6ef5d8ce14b6381d52eb7adafdd6c8bb3c upstream.

IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)

Fix this by sanitizing IndexCard before using it to index apbs.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/applicom.c |   35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)

--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -32,6 +32,7 @@
 #include <linux/wait.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/nospec.h>
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
@@ -386,7 +387,11 @@ static ssize_t ac_write(struct file *fil
 	TicCard = st_loc.tic_des_from_pc;	/* tic number to send            */
 	IndexCard = NumCard - 1;
 
-	if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
+	if (IndexCard >= MAX_BOARD)
+		return -EINVAL;
+	IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+	if (!apbs[IndexCard].RamIO)
 		return -EINVAL;
 
 #ifdef DEBUG
@@ -697,6 +702,7 @@ static long ac_ioctl(struct file *file,
 	unsigned char IndexCard;
 	void __iomem *pmem;
 	int ret = 0;
+	static int warncount = 10;
 	volatile unsigned char byte_reset_it;
 	struct st_ram_io *adgl;
 	void __user *argp = (void __user *)arg;
@@ -711,16 +717,12 @@ static long ac_ioctl(struct file *file,
 	mutex_lock(&ac_mutex);	
 	IndexCard = adgl->num_card-1;
 	 
-	if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
-		static int warncount = 10;
-		if (warncount) {
-			printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
-			warncount--;
-		}
-		kfree(adgl);
-		mutex_unlock(&ac_mutex);
-		return -EINVAL;
-	}
+	if (cmd != 6 && IndexCard >= MAX_BOARD)
+		goto err;
+	IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+	if (cmd != 6 && !apbs[IndexCard].RamIO)
+		goto err;
 
 	switch (cmd) {
 		
@@ -838,5 +840,16 @@ static long ac_ioctl(struct file *file,
 	kfree(adgl);
 	mutex_unlock(&ac_mutex);
 	return 0;
+
+err:
+	if (warncount) {
+		pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
+			(int)IndexCard + 1);
+		warncount--;
+	}
+	kfree(adgl);
+	mutex_unlock(&ac_mutex);
+	return -EINVAL;
+
 }
 

[PATCH 4.14 037/135] MIPS: irq: Allocate accurate order pages for irq stack

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Xiang <liu.xiang6@zte.com.cn>

commit 72faa7a773ca59336f3c889e878de81445c5a85c upstream.

The irq_pages is the number of pages for irq stack, but not the
order which is needed by __get_free_pages().
We can use get_order() to calculate the accurate order.

Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: fe8bd18ffea5 ("MIPS: Introduce irq_stack")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/irq.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -52,6 +52,7 @@ asmlinkage void spurious_interrupt(void)
 void __init init_IRQ(void)
 {
 	int i;
+	unsigned int order = get_order(IRQ_STACK_SIZE);
 
 	for (i = 0; i < NR_IRQS; i++)
 		irq_set_noprobe(i);
@@ -62,8 +63,7 @@ void __init init_IRQ(void)
 	arch_init_irq();
 
 	for_each_possible_cpu(i) {
-		int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
-		void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+		void *s = (void *)__get_free_pages(GFP_KERNEL, order);
 
 		irq_stack[i] = s;
 		pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,

[PATCH 4.14 038/135] hugetlbfs: fix races and page leaks during migration

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Kravetz <mike.kravetz@oracle.com>

commit cb6acd01e2e43fd8bad11155752b7699c3d0fb76 upstream.

hugetlb pages should only be migrated if they are 'active'.  The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.

When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked.  Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code.  This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.

To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.

Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available.  A program mmaps a 2G file in a hugetlbfs filesystem.  It
then migrates the pages associated with the file from one node to
another.  When the program exits, huge page counts are as follows:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  0       free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

That is as expected.  2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem.  If the file is then removed, the counts become:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  1024    free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use.  The only way to 'fix' the filesystem
accounting is to unmount the filesystem

If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field.  At migration
time, this information is not preserved.  To fix, simply transfer
page_private from old to new page at migration time if necessary.

There is a related race with removing a huge page from a file and
migration.  When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page().  A page could be migrated
while in this state.  However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.

To fix that, check for this condition before migrating a huge page.  If
the condition is detected, return EBUSY for the page.

Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
  Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
  Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hugetlbfs/inode.c |   12 ++++++++++++
 mm/hugetlb.c         |   16 +++++++++++++---
 mm/migrate.c         |   11 +++++++++++
 3 files changed, 36 insertions(+), 3 deletions(-)

--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -845,6 +845,18 @@ static int hugetlbfs_migrate_page(struct
 	rc = migrate_huge_page_move_mapping(mapping, newpage, page);
 	if (rc != MIGRATEPAGE_SUCCESS)
 		return rc;
+
+	/*
+	 * page_private is subpool pointer in hugetlb pages.  Transfer to
+	 * new page.  PagePrivate is not associated with page_private for
+	 * hugetlb pages and can not be set here as only page_huge_active
+	 * pages can be migrated.
+	 */
+	if (page_private(page)) {
+		set_page_private(newpage, page_private(page));
+		set_page_private(page, 0);
+	}
+
 	if (mode != MIGRATE_SYNC_NO_COPY)
 		migrate_page_copy(newpage, page);
 	else
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3577,7 +3577,6 @@ retry_avoidcopy:
 	copy_user_huge_page(new_page, old_page, address, vma,
 			    pages_per_huge_page(h));
 	__SetPageUptodate(new_page);
-	set_page_huge_active(new_page);
 
 	mmun_start = address & huge_page_mask(h);
 	mmun_end = mmun_start + huge_page_size(h);
@@ -3600,6 +3599,7 @@ retry_avoidcopy:
 				make_huge_pte(vma, new_page, 1));
 		page_remove_rmap(old_page, true);
 		hugepage_add_new_anon_rmap(new_page, vma, address);
+		set_page_huge_active(new_page);
 		/* Make the old page be freed below */
 		new_page = old_page;
 	}
@@ -3682,6 +3682,7 @@ static int hugetlb_no_page(struct mm_str
 	struct page *page;
 	pte_t new_pte;
 	spinlock_t *ptl;
+	bool new_page = false;
 
 	/*
 	 * Currently, we are forced to kill the process in the event the
@@ -3747,7 +3748,7 @@ retry:
 		}
 		clear_huge_page(page, address, pages_per_huge_page(h));
 		__SetPageUptodate(page);
-		set_page_huge_active(page);
+		new_page = true;
 
 		if (vma->vm_flags & VM_MAYSHARE) {
 			int err = huge_add_to_page_cache(page, mapping, idx);
@@ -3818,6 +3819,15 @@ retry:
 	}
 
 	spin_unlock(ptl);
+
+	/*
+	 * Only make newly allocated pages active.  Existing pages found
+	 * in the pagecache could be !page_huge_active() if they have been
+	 * isolated for migration.
+	 */
+	if (new_page)
+		set_page_huge_active(page);
+
 	unlock_page(page);
 out:
 	return ret;
@@ -4053,7 +4063,6 @@ int hugetlb_mcopy_atomic_pte(struct mm_s
 	 * the set_pte_at() write.
 	 */
 	__SetPageUptodate(page);
-	set_page_huge_active(page);
 
 	mapping = dst_vma->vm_file->f_mapping;
 	idx = vma_hugecache_offset(h, dst_vma, dst_addr);
@@ -4121,6 +4130,7 @@ int hugetlb_mcopy_atomic_pte(struct mm_s
 	update_mmu_cache(dst_vma, dst_addr, dst_pte);
 
 	spin_unlock(ptl);
+	set_page_huge_active(page);
 	if (vm_shared)
 		unlock_page(page);
 	ret = 0;
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1303,6 +1303,16 @@ static int unmap_and_move_huge_page(new_
 		lock_page(hpage);
 	}
 
+	/*
+	 * Check for pages which are in the process of being freed.  Without
+	 * page_mapping() set, hugetlbfs specific move page routine will not
+	 * be called and we could leak usage counts for subpools.
+	 */
+	if (page_private(hpage) && !page_mapping(hpage)) {
+		rc = -EBUSY;
+		goto out_unlock;
+	}
+
 	if (PageAnon(hpage))
 		anon_vma = page_get_anon_vma(hpage);
 
@@ -1334,6 +1344,7 @@ put_anon:
 		set_page_owner_migrate_reason(new_hpage, reason);
 	}
 
+out_unlock:
 	unlock_page(hpage);
 out:
 	if (rc != -EAGAIN)

[PATCH 4.14 039/135] xtensa: fix get_wchan

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit d90b88fd3653f1fb66ecc6571b860d5a5749fa56 upstream.

Stack unwinding is implemented incorrectly in xtensa get_wchan: instead
of extracting a0 and a1 registers from the spill location under the
stack pointer it extracts a word pointed to by the stack pointer and
subtracts 4 or 3 from it.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/kernel/process.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -314,8 +314,8 @@ unsigned long get_wchan(struct task_stru
 
 		/* Stack layout: sp-4: ra, sp-3: sp' */
 
-		pc = MAKE_PC_FROM_RA(*(unsigned long*)sp - 4, sp);
-		sp = *(unsigned long *)sp - 3;
+		pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), sp);
+		sp = SPILL_SLOT(sp, 1);
 	} while (count++ < 16);
 	return 0;
 }

[PATCH 4.14 040/135] Bluetooth: Fix locking in bt_accept_enqueue() for BH context

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Kaehlcke <mka@chromium.org>

commit c4f5627f7eeecde1bb6b646d8c0907b96dc2b2a6 upstream.

With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket
atomically") lock_sock[_nested]() is used to acquire the socket lock
before manipulating the socket. lock_sock[_nested]() may block, which
is problematic since bt_accept_enqueue() can be called in bottom half
context (e.g. from rfcomm_connect_ind()):

[<ffffff80080d81ec>] __might_sleep+0x4c/0x80
[<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
[<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
[<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]

Add a parameter to bt_accept_enqueue() to indicate whether the
function is called from BH context, and acquire the socket lock
with bh_lock_sock_nested() if that's the case.

Also adapt all callers of bt_accept_enqueue() to pass the new
parameter:

- l2cap_sock_new_connection_cb()
  - uses lock_sock() to lock the parent socket => process context

- rfcomm_connect_ind()
  - acquires the parent socket lock with bh_lock_sock() => BH
    context

- __sco_chan_add()
  - called from sco_chan_add(), which is called from sco_connect().
    parent is NULL, hence bt_accept_enqueue() isn't called in this
    code path and we can ignore it
  - also called from sco_conn_ready(). uses bh_lock_sock() to acquire
    the parent lock => BH context

Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/bluetooth/bluetooth.h |    2 +-
 net/bluetooth/af_bluetooth.c      |   16 +++++++++++++---
 net/bluetooth/l2cap_sock.c        |    2 +-
 net/bluetooth/rfcomm/sock.c       |    2 +-
 net/bluetooth/sco.c               |    2 +-
 5 files changed, 17 insertions(+), 7 deletions(-)

--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -273,7 +273,7 @@ int  bt_sock_ioctl(struct socket *sock,
 int  bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
 int  bt_sock_wait_ready(struct sock *sk, unsigned long flags);
 
-void bt_accept_enqueue(struct sock *parent, struct sock *sk);
+void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh);
 void bt_accept_unlink(struct sock *sk);
 struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
 
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -154,15 +154,25 @@ void bt_sock_unlink(struct bt_sock_list
 }
 EXPORT_SYMBOL(bt_sock_unlink);
 
-void bt_accept_enqueue(struct sock *parent, struct sock *sk)
+void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh)
 {
 	BT_DBG("parent %p, sk %p", parent, sk);
 
 	sock_hold(sk);
-	lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
+
+	if (bh)
+		bh_lock_sock_nested(sk);
+	else
+		lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
+
 	list_add_tail(&bt_sk(sk)->accept_q, &bt_sk(parent)->accept_q);
 	bt_sk(sk)->parent = parent;
-	release_sock(sk);
+
+	if (bh)
+		bh_unlock_sock(sk);
+	else
+		release_sock(sk);
+
 	parent->sk_ack_backlog++;
 }
 EXPORT_SYMBOL(bt_accept_enqueue);
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1253,7 +1253,7 @@ static struct l2cap_chan *l2cap_sock_new
 
 	l2cap_sock_init(sk, parent);
 
-	bt_accept_enqueue(parent, sk);
+	bt_accept_enqueue(parent, sk, false);
 
 	release_sock(parent);
 
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -988,7 +988,7 @@ int rfcomm_connect_ind(struct rfcomm_ses
 	rfcomm_pi(sk)->channel = channel;
 
 	sk->sk_state = BT_CONFIG;
-	bt_accept_enqueue(parent, sk);
+	bt_accept_enqueue(parent, sk, true);
 
 	/* Accept connection and return socket DLC */
 	*d = rfcomm_pi(sk)->dlc;
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -193,7 +193,7 @@ static void __sco_chan_add(struct sco_co
 	conn->sk = sk;
 
 	if (parent)
-		bt_accept_enqueue(parent, sk);
+		bt_accept_enqueue(parent, sk, true);
 }
 
 static int sco_chan_add(struct sco_conn *conn, struct sock *sk,

[PATCH 4.14 041/135] exec: Fix mem leak in kernel_read_file

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YueHaibing <yuehaibing@huawei.com>

commit f612acfae86af7ecad754ae6a46019be9da05b8e upstream.

syzkaller report this:
BUG: memory leak
unreferenced object 0xffffc9000488d000 (size 9195520):
  comm "syz-executor.0", pid 2752, jiffies 4294787496 (age 18.757s)
  hex dump (first 32 bytes):
    ff ff ff ff ff ff ff ff a8 00 00 00 01 00 00 00  ................
    02 00 00 00 00 00 00 00 80 a1 7a c1 ff ff ff ff  ..........z.....
  backtrace:
    [<000000000863775c>] __vmalloc_node mm/vmalloc.c:1795 [inline]
    [<000000000863775c>] __vmalloc_node_flags mm/vmalloc.c:1809 [inline]
    [<000000000863775c>] vmalloc+0x8c/0xb0 mm/vmalloc.c:1831
    [<000000003f668111>] kernel_read_file+0x58f/0x7d0 fs/exec.c:924
    [<000000002385813f>] kernel_read_file_from_fd+0x49/0x80 fs/exec.c:993
    [<0000000011953ff1>] __do_sys_finit_module+0x13b/0x2a0 kernel/module.c:3895
    [<000000006f58491f>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
    [<00000000ee78baf4>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000241f889b>] 0xffffffffffffffff

It should goto 'out_free' lable to free allocated buf while kernel_read
fails.

Fixes: 39d637af5aa7 ("vfs: forbid write access when reading a file into memory")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -925,7 +925,7 @@ int kernel_read_file(struct file *file,
 		bytes = kernel_read(file, *buf + pos, i_size - pos, &pos);
 		if (bytes < 0) {
 			ret = bytes;
-			goto out;
+			goto out_free;
 		}
 
 		if (bytes == 0)

[PATCH 4.14 042/135] scsi: core: reset host byte in DID_NEXUS_FAILURE case

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Wilck <mwilck@suse.com>

commit 4a067cf823d9d8e50d41cfb618011c0d4a969c72 upstream.

Up to 4.12, __scsi_error_from_host_byte() would reset the host byte to
DID_OK for various cases including DID_NEXUS_FAILURE.  Commit
2a842acab109 ("block: introduce new block status code type") replaced this
function with scsi_result_to_blk_status() and removed the host-byte
resetting code for the DID_NEXUS_FAILURE case.  As the line
set_host_byte(cmd, DID_OK) was preserved for the other cases, I suppose
this was an editing mistake.

The fact that the host byte remains set after 4.13 is causing problems with
the sg_persist tool, which now returns success rather then exit status 24
when a RESERVATION CONFLICT error is encountered.

Fixes: 2a842acab109 "block: introduce new block status code type"
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_lib.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -734,6 +734,7 @@ static blk_status_t __scsi_error_from_ho
 		set_host_byte(cmd, DID_OK);
 		return BLK_STS_TARGET;
 	case DID_NEXUS_FAILURE:
+		set_host_byte(cmd, DID_OK);
 		return BLK_STS_NEXUS;
 	case DID_ALLOC_FAILURE:
 		set_host_byte(cmd, DID_OK);

[PATCH 4.14 043/135] media: uvcvideo: Fix type check leading to overflow

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Strachan <astrachan@google.com>

commit 47bb117911b051bbc90764a8bff96543cbd2005f upstream.

When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.

If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.

Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.

Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/uvc/uvc_driver.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1054,11 +1054,19 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		/* Make sure the terminal type MSB is not null, otherwise it
-		 * could be confused with a unit.
+		/*
+		 * Reject invalid terminal types that would cause issues:
+		 *
+		 * - The high byte must be non-zero, otherwise it would be
+		 *   confused with a unit.
+		 *
+		 * - Bit 15 must be 0, as we use it internally as a terminal
+		 *   direction flag.
+		 *
+		 * Other unknown types are accepted.
 		 */
 		type = get_unaligned_le16(&buffer[4]);
-		if ((type & 0xff00) == 0) {
+		if ((type & 0x7f00) == 0 || (type & 0x8000) != 0) {
 			uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
 				"interface %d INPUT_TERMINAL %d has invalid "
 				"type 0x%04x, skipping\n", udev->devnum,

[PATCH 4.14 044/135] vti4: Fix a ipip packet processing bug in IPCOMP virtual tunnel

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit dd9ee3444014e8f28c0eefc9fffc9ac9c5248c12 ]

Recently we run a network test over ipcomp virtual tunnel.We find that
if a ipv4 packet needs fragment, then the peer can't receive
it.

We deep into the code and find that when packet need fragment the smaller
fragment will be encapsulated by ipip not ipcomp. So when the ipip packet
goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code
always set skb'dev to the last fragment's dev. After ipv4 defrag processing,
when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV
error.

This patch adds compatible support for the ipip process in ipcomp virtual tunnel.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_vti.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 00d4371d4573..306603a7f351 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -74,6 +74,33 @@ static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi,
 	return 0;
 }
 
+static int vti_input_ipip(struct sk_buff *skb, int nexthdr, __be32 spi,
+		     int encap_type)
+{
+	struct ip_tunnel *tunnel;
+	const struct iphdr *iph = ip_hdr(skb);
+	struct net *net = dev_net(skb->dev);
+	struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
+
+	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+				  iph->saddr, iph->daddr, 0);
+	if (tunnel) {
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			goto drop;
+
+		XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
+
+		skb->dev = tunnel->dev;
+
+		return xfrm_input(skb, nexthdr, spi, encap_type);
+	}
+
+	return -EINVAL;
+drop:
+	kfree_skb(skb);
+	return 0;
+}
+
 static int vti_rcv(struct sk_buff *skb)
 {
 	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
@@ -82,6 +109,14 @@ static int vti_rcv(struct sk_buff *skb)
 	return vti_input(skb, ip_hdr(skb)->protocol, 0, 0);
 }
 
+static int vti_rcv_ipip(struct sk_buff *skb)
+{
+	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
+	XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
+
+	return vti_input_ipip(skb, ip_hdr(skb)->protocol, ip_hdr(skb)->saddr, 0);
+}
+
 static int vti_rcv_cb(struct sk_buff *skb, int err)
 {
 	unsigned short family;
@@ -439,6 +474,12 @@ static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = {
 	.priority	=	100,
 };
 
+static struct xfrm_tunnel ipip_handler __read_mostly = {
+	.handler	=	vti_rcv_ipip,
+	.err_handler	=	vti4_err,
+	.priority	=	0,
+};
+
 static int __net_init vti_init_net(struct net *net)
 {
 	int err;
@@ -607,6 +648,13 @@ static int __init vti_init(void)
 	if (err < 0)
 		goto xfrm_proto_comp_failed;
 
+	msg = "ipip tunnel";
+	err = xfrm4_tunnel_register(&ipip_handler, AF_INET);
+	if (err < 0) {
+		pr_info("%s: cant't register tunnel\n",__func__);
+		goto xfrm_tunnel_failed;
+	}
+
 	msg = "netlink interface";
 	err = rtnl_link_register(&vti_link_ops);
 	if (err < 0)
@@ -616,6 +664,8 @@ static int __init vti_init(void)
 
 rtnl_link_failed:
 	xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
+xfrm_tunnel_failed:
+	xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
 xfrm_proto_comp_failed:
 	xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
 xfrm_proto_ah_failed:
-- 
2.19.1

[PATCH 4.14 045/135] perf core: Fix perf_proc_update_handler() bug

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1a51c5da5acc6c188c917ba572eebac5f8793432 ]

The perf_proc_update_handler() handles /proc/sys/kernel/perf_event_max_sample_rate
syctl variable.  When the PMU IRQ handler timing monitoring is disabled, i.e,
when /proc/sys/kernel/perf_cpu_time_max_percent is equal to 0 or 100,
then no modification to sysctl_perf_event_sample_rate is allowed to prevent
possible hang from wrong values.

The problem is that the test to prevent modification is made after the
sysctl variable is modified in perf_proc_update_handler().

You get an error:

  $ echo 10001 >/proc/sys/kernel/perf_event_max_sample_rate
  echo: write error: invalid argument

But the value is still modified causing all sorts of inconsistencies:

  $ cat /proc/sys/kernel/perf_event_max_sample_rate
  10001

This patch fixes the problem by moving the parsing of the value after
the test.

Committer testing:

  # echo 100 > /proc/sys/kernel/perf_cpu_time_max_percent
  # echo 10001 > /proc/sys/kernel/perf_event_max_sample_rate
  -bash: echo: write error: Invalid argument
  # cat /proc/sys/kernel/perf_event_max_sample_rate
  10001
  #

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547169436-6266-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 17d5d41464c6..92939b5397df 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -436,18 +436,18 @@ int perf_proc_update_handler(struct ctl_table *table, int write,
 		void __user *buffer, size_t *lenp,
 		loff_t *ppos)
 {
-	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-
-	if (ret || !write)
-		return ret;
-
+	int ret;
+	int perf_cpu = sysctl_perf_cpu_time_max_percent;
 	/*
 	 * If throttling is disabled don't allow the write:
 	 */
-	if (sysctl_perf_cpu_time_max_percent == 100 ||
-	    sysctl_perf_cpu_time_max_percent == 0)
+	if (write && (perf_cpu == 100 || perf_cpu == 0))
 		return -EINVAL;
 
+	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+	if (ret || !write)
+		return ret;
+
 	max_samples_per_tick = DIV_ROUND_UP(sysctl_perf_event_sample_rate, HZ);
 	perf_sample_period_ns = NSEC_PER_SEC / sysctl_perf_event_sample_rate;
 	update_perf_cpu_limits();
-- 
2.19.1

[PATCH 4.14 046/135] perf tools: Handle TOPOLOGY headers with no CPU

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]

This patch fixes an issue in cpumap.c when used with the TOPOLOGY
header. In some configurations, some NUMA nodes may have no CPU (empty
cpulist). Yet a cpumap map must be created otherwise perf abort with an
error. This patch handles this case by creating a dummy map.

  Before:

  $ perf record -o - -e cycles noploop 2 | perf script -i -
  0x6e8 [0x6c]: failed to process type: 80

  After:

  $ perf record -o - -e cycles noploop 2 | perf script -i -
  noploop for 2 seconds

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/cpumap.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 1ccbd3342069..383674f448fc 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -134,7 +134,12 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
 	if (!cpu_list)
 		return cpu_map__read_all_cpu_map();
 
-	if (!isdigit(*cpu_list))
+	/*
+	 * must handle the case of empty cpumap to cover
+	 * TOPOLOGY header for NUMA nodes with no CPU
+	 * ( e.g., because of CPU hotplug)
+	 */
+	if (!isdigit(*cpu_list) && *cpu_list != '\0')
 		goto out;
 
 	while (isdigit(*cpu_list)) {
@@ -181,8 +186,10 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
 
 	if (nr_cpus > 0)
 		cpus = cpu_map__trim_new(nr_cpus, tmp_cpus);
-	else
+	else if (*cpu_list != '\0')
 		cpus = cpu_map__default_new();
+	else
+		cpus = cpu_map__dummy_new();
 invalid:
 	free(tmp_cpus);
 out:
-- 
2.19.1

[PATCH 4.14 047/135] IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 904bba211acc2112fdf866e5a2bc6cd9ecd0de1b ]

The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.

The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.

Remove the extra subtraction when handling the opcode.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/ud.c    | 1 -
 drivers/infiniband/hw/qib/qib_ud.c | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c
index 37abd150fad3..74aff88c593d 100644
--- a/drivers/infiniband/hw/hfi1/ud.c
+++ b/drivers/infiniband/hw/hfi1/ud.c
@@ -954,7 +954,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet)
 	    opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
 		wc.ex.imm_data = ohdr->u.ud.imm_data;
 		wc.wc_flags = IB_WC_WITH_IMM;
-		tlen -= sizeof(u32);
 	} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
 		wc.ex.imm_data = 0;
 		wc.wc_flags = 0;
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index be4907453ac4..5ef144e4a4cb 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -515,7 +515,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct ib_header *hdr,
 	    opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
 		wc.ex.imm_data = ohdr->u.ud.imm_data;
 		wc.wc_flags = IB_WC_WITH_IMM;
-		tlen -= sizeof(u32);
 	} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
 		wc.ex.imm_data = 0;
 		wc.wc_flags = 0;
-- 
2.19.1

[PATCH 4.14 048/135] iommu/amd: Call free_iova_fast with pfn in map_sg

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 51d8838d66d3249508940d8f59b07701f2129723 ]

In the error path of map_sg, free_iova_fast is being called with
address instead of the pfn. This results in a bad value getting into
the rcache, and can result in hitting a BUG_ON when
iova_magazine_free_pfns is called.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 766103ea237e..ded13a6afa66 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2566,7 +2566,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 	}
 
 out_free_iova:
-	free_iova_fast(&dma_dom->iovad, address, npages);
+	free_iova_fast(&dma_dom->iovad, address >> PAGE_SHIFT, npages);
 
 out_err:
 	return 0;
-- 
2.19.1

[PATCH 4.14 049/135] iommu/amd: Unmap all mapped pages in error path of map_sg

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ]

In the error path of map_sg there is an incorrect if condition
for breaking out of the loop that searches the scatterlist
for mapped pages to unmap. Instead of breaking out of the
loop once all the pages that were mapped have been unmapped,
it will break out of the loop after it has unmapped 1 page.
Fix the condition, so it breaks out of the loop only after
all the mapped pages have been unmapped.

Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg")
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index ded13a6afa66..0c0acf6fda87 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2560,7 +2560,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 			bus_addr  = address + s->dma_address + (j << PAGE_SHIFT);
 			iommu_unmap_page(domain, bus_addr, PAGE_SIZE);
 
-			if (--mapped_pages)
+			if (--mapped_pages == 0)
 				goto out_free_iova;
 		}
 	}
-- 
2.19.1

[PATCH 4.14 050/135] ipvs: Fix signed integer overflow when setsockopt timeout

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'

Reproduce program:
	#include <stdio.h>
	#include <sys/types.h>
	#include <sys/socket.h>

	#define IPPROTO_IP 0
	#define IPPROTO_RAW 255

	#define IP_VS_BASE_CTL		(64+1024+64)
	#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)

	/* The argument to IP_VS_SO_GET_TIMEOUT */
	struct ipvs_timeout_t {
		int tcp_timeout;
		int tcp_fin_timeout;
		int udp_timeout;
	};

	int main() {
		int ret = -1;
		int sockfd = -1;
		struct ipvs_timeout_t to;

		sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
		if (sockfd == -1) {
			printf("socket init error\n");
			return -1;
		}

		to.tcp_timeout = -2147483647;
		to.tcp_fin_timeout = -2147483647;
		to.udp_timeout = -2147483647;

		ret = setsockopt(sockfd,
				 IPPROTO_IP,
				 IP_VS_SO_SET_TIMEOUT,
				 (char *)(&to),
				 sizeof(to));

		printf("setsockopt return %d\n", ret);
		return ret;
	}

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 2f45c3ce77ef..dff4ead3d117 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2252,6 +2252,18 @@ static int ip_vs_set_timeout(struct netns_ipvs *ipvs, struct ip_vs_timeout_user
 		  u->tcp_fin_timeout,
 		  u->udp_timeout);
 
+#ifdef CONFIG_IP_VS_PROTO_TCP
+	if (u->tcp_timeout < 0 || u->tcp_timeout > (INT_MAX / HZ) ||
+	    u->tcp_fin_timeout < 0 || u->tcp_fin_timeout > (INT_MAX / HZ)) {
+		return -EINVAL;
+	}
+#endif
+
+#ifdef CONFIG_IP_VS_PROTO_UDP
+	if (u->udp_timeout < 0 || u->udp_timeout > (INT_MAX / HZ))
+		return -EINVAL;
+#endif
+
 #ifdef CONFIG_IP_VS_PROTO_TCP
 	if (u->tcp_timeout) {
 		pd = ip_vs_proto_data_get(ipvs, IPPROTO_TCP);
-- 
2.19.1

[PATCH 4.14 051/135] iommu/amd: Fix IOMMU page flush when detach device from a domain

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ]

When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.

Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.

However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.

Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.

Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 6de8ad9b9ee0 ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 0c0acf6fda87..78b97f31a1f2 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1919,6 +1919,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
 
 static void do_detach(struct iommu_dev_data *dev_data)
 {
+	struct protection_domain *domain = dev_data->domain;
 	struct amd_iommu *iommu;
 	u16 alias;
 
@@ -1934,10 +1935,6 @@ static void do_detach(struct iommu_dev_data *dev_data)
 	iommu = amd_iommu_rlookup_table[dev_data->devid];
 	alias = dev_data->alias;
 
-	/* decrease reference counters */
-	dev_data->domain->dev_iommu[iommu->index] -= 1;
-	dev_data->domain->dev_cnt                 -= 1;
-
 	/* Update data structures */
 	dev_data->domain = NULL;
 	list_del(&dev_data->list);
@@ -1947,6 +1944,16 @@ static void do_detach(struct iommu_dev_data *dev_data)
 
 	/* Flush the DTE entry */
 	device_flush_dte(dev_data);
+
+	/* Flush IOTLB */
+	domain_flush_tlb_pde(domain);
+
+	/* Wait for the flushes to finish */
+	domain_flush_complete(domain);
+
+	/* decrease reference counters - needs to happen after the flushes */
+	domain->dev_iommu[iommu->index] -= 1;
+	domain->dev_cnt                 -= 1;
 }
 
 /*
-- 
2.19.1

[PATCH 4.14 052/135] xtensa: SMP: fix ccount_timer_shutdown

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4fe8713b873fc881284722ce4ac47995de7cf62c ]

ccount_timer_shutdown is called from the atomic context in the
secondary_start_kernel, resulting in the following BUG:

BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
Preemption disabled at:
  secondary_start_kernel+0xa1/0x130
Call Trace:
  ___might_sleep+0xe7/0xfc
  __might_sleep+0x41/0x44
  synchronize_irq+0x24/0x64
  disable_irq+0x11/0x14
  ccount_timer_shutdown+0x12/0x20
  clockevents_switch_state+0x82/0xb4
  clockevents_exchange_device+0x54/0x60
  tick_check_new_device+0x46/0x70
  clockevents_register_device+0x8c/0xc8
  clockevents_config_and_register+0x1d/0x2c
  local_timer_setup+0x75/0x7c
  secondary_start_kernel+0xb4/0x130
  should_never_return+0x32/0x35

Use disable_irq_nosync instead of disable_irq to avoid it.
This is safe because the ccount timer IRQ is per-CPU, and once IRQ is
masked the ISR will not be called.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index fd524a54d2ab..378186b5eb40 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -89,7 +89,7 @@ static int ccount_timer_shutdown(struct clock_event_device *evt)
 		container_of(evt, struct ccount_timer, evt);
 
 	if (timer->irq_enabled) {
-		disable_irq(evt->irq);
+		disable_irq_nosync(evt->irq);
 		timer->irq_enabled = 0;
 	}
 	return 0;
-- 
2.19.1

[PATCH 4.14 053/135] selftests: cpu-hotplug: fix case where CPUs offline > CPUs present

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b531b6137834a55857a337ac17510d6436b6fbb ]

The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline.  However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline.  Fix this by testing the maximum present CPU instead.

Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.

Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/cpu-hotplug/cpu-on-off-test.sh        | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
index f3a8933c1275..49ccd2293343 100755
--- a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
@@ -35,6 +35,10 @@ prerequisite()
 		exit 0
 	fi
 
+	present_cpus=`cat $SYSFS/devices/system/cpu/present`
+	present_max=${present_cpus##*-}
+	echo "present_cpus = $present_cpus present_max = $present_max"
+
 	echo -e "\t Cpus in online state: $online_cpus"
 
 	offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
@@ -149,6 +153,8 @@ online_cpus=0
 online_max=0
 offline_cpus=0
 offline_max=0
+present_cpus=0
+present_max=0
 
 while getopts e:ahp: opt; do
 	case $opt in
@@ -188,9 +194,10 @@ if [ $allcpus -eq 0 ]; then
 	online_cpu_expect_success $online_max
 
 	if [[ $offline_cpus -gt 0 ]]; then
-		echo -e "\t offline to online to offline: cpu $offline_max"
-		online_cpu_expect_success $offline_max
-		offline_cpu_expect_success $offline_max
+		echo -e "\t offline to online to offline: cpu $present_max"
+		online_cpu_expect_success $present_max
+		offline_cpu_expect_success $present_max
+		online_cpu $present_max
 	fi
 	exit 0
 else
-- 
2.19.1

[PATCH 4.14 054/135] xtensa: SMP: fix secondary CPU initialization

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 32a7726c4f4aadfabdb82440d84f88a5a2c8fe13 ]

- add missing memory barriers to the secondary CPU synchronization spin
  loops; add comment to the matching memory barrier in the boot_secondary
  and __cpu_die functions;
- use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount
  instead of reading/writing them directly;
- re-initialize cpu_running every time before starting secondary CPU to
  flush possible previous CPU startup results.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/head.S |  5 ++++-
 arch/xtensa/kernel/smp.c  | 34 +++++++++++++++++++++-------------
 2 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 27c8e07ace43..29f445b410b3 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -281,12 +281,13 @@ should_never_return:
 
 	movi	a2, cpu_start_ccount
 1:
+	memw
 	l32i	a3, a2, 0
 	beqi	a3, 0, 1b
 	movi	a3, 0
 	s32i	a3, a2, 0
-	memw
 1:
+	memw
 	l32i	a3, a2, 0
 	beqi	a3, 0, 1b
 	wsr	a3, ccount
@@ -323,11 +324,13 @@ ENTRY(cpu_restart)
 	rsr	a0, prid
 	neg	a2, a0
 	movi	a3, cpu_start_id
+	memw
 	s32i	a2, a3, 0
 #if XCHAL_DCACHE_IS_WRITEBACK
 	dhwbi	a3, 0
 #endif
 1:
+	memw
 	l32i	a2, a3, 0
 	dhi	a3, 0
 	bne	a2, a0, 1b
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 932d64689bac..c9fc2c4f71b3 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -195,9 +195,11 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
 	int i;
 
 #ifdef CONFIG_HOTPLUG_CPU
-	cpu_start_id = cpu;
-	system_flush_invalidate_dcache_range(
-			(unsigned long)&cpu_start_id, sizeof(cpu_start_id));
+	WRITE_ONCE(cpu_start_id, cpu);
+	/* Pairs with the third memw in the cpu_restart */
+	mb();
+	system_flush_invalidate_dcache_range((unsigned long)&cpu_start_id,
+					     sizeof(cpu_start_id));
 #endif
 	smp_call_function_single(0, mx_cpu_start, (void *)cpu, 1);
 
@@ -206,18 +208,21 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
 			ccount = get_ccount();
 		while (!ccount);
 
-		cpu_start_ccount = ccount;
+		WRITE_ONCE(cpu_start_ccount, ccount);
 
-		while (time_before(jiffies, timeout)) {
+		do {
+			/*
+			 * Pairs with the first two memws in the
+			 * .Lboot_secondary.
+			 */
 			mb();
-			if (!cpu_start_ccount)
-				break;
-		}
+			ccount = READ_ONCE(cpu_start_ccount);
+		} while (ccount && time_before(jiffies, timeout));
 
-		if (cpu_start_ccount) {
+		if (ccount) {
 			smp_call_function_single(0, mx_cpu_stop,
-					(void *)cpu, 1);
-			cpu_start_ccount = 0;
+						 (void *)cpu, 1);
+			WRITE_ONCE(cpu_start_ccount, 0);
 			return -EIO;
 		}
 	}
@@ -237,6 +242,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	pr_debug("%s: Calling wakeup_secondary(cpu:%d, idle:%p, sp: %08lx)\n",
 			__func__, cpu, idle, start_info.stack);
 
+	init_completion(&cpu_running);
 	ret = boot_secondary(cpu, idle);
 	if (ret == 0) {
 		wait_for_completion_timeout(&cpu_running,
@@ -298,8 +304,10 @@ void __cpu_die(unsigned int cpu)
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	while (time_before(jiffies, timeout)) {
 		system_invalidate_dcache_range((unsigned long)&cpu_start_id,
-				sizeof(cpu_start_id));
-		if (cpu_start_id == -cpu) {
+					       sizeof(cpu_start_id));
+		/* Pairs with the second memw in the cpu_restart */
+		mb();
+		if (READ_ONCE(cpu_start_id) == -cpu) {
 			platform_cpu_kill(cpu);
 			return;
 		}
-- 
2.19.1

[PATCH 4.14 055/135] xtensa: smp_lx200_defconfig: fix vectors clash

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 306b38305c0f86de7f17c5b091a95451dcc93d7d ]

Secondary CPU reset vector overlaps part of the double exception handler
code, resulting in weird crashes and hangups when running user code.
Move exception vectors one page up so that they don't clash with the
secondary CPU reset vector.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/configs/smp_lx200_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index 14e3ca353ac8..5035b86a2e49 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -34,6 +34,7 @@ CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
 # CONFIG_PCI is not set
+CONFIG_VECTORS_OFFSET=0x00002000
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
-- 
2.19.1

[PATCH 4.14 056/135] xtensa: SMP: mark each possible CPU as present

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8b1c42cdd7181200dc1fff39dcb6ac1a3fac2c25 ]

Otherwise it is impossible to enable CPUs after booting with 'maxcpus'
parameter.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index c9fc2c4f71b3..80be6449c497 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -83,7 +83,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned i;
 
-	for (i = 0; i < max_cpus; ++i)
+	for_each_possible_cpu(i)
 		set_cpu_present(i, true);
 }
 
-- 
2.19.1

[PATCH 4.14 057/135] xtensa: SMP: limit number of possible CPUs by NR_CPUS

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 25384ce5f9530def39421597b1457d9462df6455 ]

This fixes the following warning at boot when the kernel is booted on a
board with more CPU cores than was configured in NR_CPUS:

  smp_init_cpus: Core Count = 8
  smp_init_cpus: Core Id = 0
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124
  Call Trace:
    __warn$part$3+0x6a/0x7c
    warn_slowpath_null+0x35/0x3c
    smp_init_cpus+0x54/0x74
    setup_arch+0x1c0/0x1d0
    start_kernel+0x44/0x310
    _startup+0x107/0x107

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/smp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 80be6449c497..be1f280c322c 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -96,6 +96,11 @@ void __init smp_init_cpus(void)
 	pr_info("%s: Core Count = %d\n", __func__, ncpus);
 	pr_info("%s: Core Id = %d\n", __func__, core_id);
 
+	if (ncpus > NR_CPUS) {
+		ncpus = NR_CPUS;
+		pr_info("%s: limiting core count by %d\n", __func__, ncpus);
+	}
+
 	for (i = 0; i < ncpus; ++i)
 		set_cpu_possible(i, true);
 }
-- 
2.19.1

[PATCH 4.14 058/135] net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6571ebce112a21ec9be68ef2f53b96fcd41fd81b ]

If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.

Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/altera/altera_msgdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c
index 0fb986ba3290..0ae723f75341 100644
--- a/drivers/net/ethernet/altera/altera_msgdma.c
+++ b/drivers/net/ethernet/altera/altera_msgdma.c
@@ -145,7 +145,8 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv)
 			& 0xffff;
 
 	if (inuse) { /* Tx FIFO is not empty */
-		ready = priv->tx_prod - priv->tx_cons - inuse - 1;
+		ready = max_t(int,
+			      priv->tx_prod - priv->tx_cons - inuse - 1, 0);
 	} else {
 		/* Check for buffered last packet */
 		status = csrrd32(priv->tx_dma_csr, msgdma_csroffs(status));
-- 
2.19.1

[PATCH 4.14 059/135] net: hns: Fix for missing of_node_put() after of_parse_phandle()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 263c6d75f9a544a3c2f8f6a26de4f4808d8f59cf ]

In hns enet driver, we use of_parse_handle() to get hold of the
device node related to "ae-handle" but we have missed to put
the node reference using of_node_put() after we are done using
the node. This patch fixes it.

Note:
This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217

Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf")
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 86662a14208e..d30c28fba249 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -2532,6 +2532,8 @@ static int hns_nic_dev_probe(struct platform_device *pdev)
 out_notify_fail:
 	(void)cancel_work_sync(&priv->service_task);
 out_read_prop_fail:
+	/* safe for ACPI FW */
+	of_node_put(to_of_node(priv->fwnode));
 	free_netdev(ndev);
 	return ret;
 }
@@ -2561,6 +2563,9 @@ static int hns_nic_dev_remove(struct platform_device *pdev)
 	set_bit(NIC_STATE_REMOVING, &priv->state);
 	(void)cancel_work_sync(&priv->service_task);
 
+	/* safe for ACPI FW */
+	of_node_put(to_of_node(priv->fwnode));
+
 	free_netdev(ndev);
 	return 0;
 }
-- 
2.19.1

[PATCH 4.14 060/135] net: hns: Restart autoneg need return failed when autoneg off

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ed29ca8b9592562559c64d027fb5eb126e463e2c ]

The hns driver of earlier devices, when autoneg off, restart autoneg
will return -EINVAL, so make the hns driver for the latest devices
do the same.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index c1e947bb852f..14df03f60e05 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -1154,16 +1154,18 @@ static int hns_get_regs_len(struct net_device *net_dev)
  */
 static int hns_nic_nway_reset(struct net_device *netdev)
 {
-	int ret = 0;
 	struct phy_device *phy = netdev->phydev;
 
-	if (netif_running(netdev)) {
-		/* if autoneg is disabled, don't restart auto-negotiation */
-		if (phy && phy->autoneg == AUTONEG_ENABLE)
-			ret = genphy_restart_aneg(phy);
-	}
+	if (!netif_running(netdev))
+		return 0;
 
-	return ret;
+	if (!phy)
+		return -EOPNOTSUPP;
+
+	if (phy->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+
+	return genphy_restart_aneg(phy);
 }
 
 static u32
-- 
2.19.1

[PATCH 4.14 061/135] net: hns: Fix wrong read accesses via Clause 45 MDIO protocol

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit cec8abba13e6a26729dfed41019720068eeeff2b ]

When reading phy registers via Clause 45 MDIO protocol, after write
address operation, the driver use another write address operation, so
can not read the right value of any phy registers. This patch fixes it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index 017e08452d8c..baf5cc251f32 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -321,7 +321,7 @@ static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 		}
 
 		hns_mdio_cmd_write(mdio_dev, is_c45,
-				   MDIO_C45_WRITE_ADDR, phy_id, devad);
+				   MDIO_C45_READ, phy_id, devad);
 	}
 
 	/* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/
-- 
2.19.1

[PATCH 4.14 062/135] net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c69c29a1a0a8f68cd87e98ba4a5a79fb8ef2a58c ]

If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 13133b30b575..01787344f6e5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1284,8 +1284,10 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 	}
 
 	ret = phy_power_on(bsp_priv, true);
-	if (ret)
+	if (ret) {
+		gmac_clk_enable(bsp_priv, false);
 		return ret;
+	}
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
-- 
2.19.1

[PATCH 4.14 063/135] netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2035f3ff8eaa29cfb5c8e2160b0f6e85eeb21a95 ]

Unlike ip(6)tables ebtables only counts user-defined chains.

The effect is that a 32bit ebtables binary on a 64bit kernel can do
'ebtables -N FOO' only after adding at least one rule, else the request
fails with -EINVAL.

This is a similar fix as done in
3f1e53abff84 ("netfilter: ebtables: don't attempt to allocate 0-sized compat array").

Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests")
Reported-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/netfilter/ebtables.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 22e4c15a1fc3..53392ac58b38 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -2292,9 +2292,12 @@ static int compat_do_replace(struct net *net, void __user *user,
 
 	xt_compat_lock(NFPROTO_BRIDGE);
 
-	ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
-	if (ret < 0)
-		goto out_unlock;
+	if (tmp.nentries) {
+		ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
+		if (ret < 0)
+			goto out_unlock;
+	}
+
 	ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state);
 	if (ret < 0)
 		goto out_unlock;
-- 
2.19.1

[PATCH 4.14 064/135] gpio: vf610: Mask all GPIO interrupts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 ]

On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.

Disable all GPIO interrupts before registering the GPIO IRQ chip.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-vf610.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index cbe9e06861de..1309b444720e 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -261,6 +261,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	struct vf610_gpio_port *port;
 	struct resource *iores;
 	struct gpio_chip *gc;
+	int i;
 	int ret;
 
 	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
@@ -300,6 +301,10 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	/* Mask all GPIO interrupts */
+	for (i = 0; i < gc->ngpio; i++)
+		vf610_gpio_writel(0, port->base + PORT_PCR(i));
+
 	/* Clear the interrupt status register for all GPIO's */
 	vf610_gpio_writel(~0, port->base + PORT_ISFR);
 
-- 
2.19.1

[PATCH 4.14 065/135] selftests: timers: use LDLIBS instead of LDFLAGS

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7d4e591bc051d3382c45caaa2530969fb42ed23d ]

posix_timers fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
 -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
 -DKTEST  -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
 posix_timers.c
 -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
 /tmp/cc1FTZzT.o: In function `check_timer_create':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
 undefined reference to `timer_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
 undefined reference to `timer_settime'
 collect2: error: ld returned 1 exit status

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/timers/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index 3496680981f2..d937e45532d8 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 CFLAGS += -O3 -Wl,-no-as-needed -Wall
-LDFLAGS += -lrt -lpthread -lm
+LDLIBS += -lrt -lpthread -lm
 
 # these are all "safe" tests that don't modify
 # system time or require escalated privileges
-- 
2.19.1

[PATCH 4.14 066/135] nfs: Fix NULL pointer dereference of dev_name

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]

There is a NULL pointer dereference of dev_name in nfs_parse_devname()

The oops looks something like:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
  ...
  Call Trace:
   ? ida_alloc_range+0x34b/0x3d0
   ? nfs_clone_super+0x80/0x80 [nfs]
   ? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
   mount_fs+0x52/0x170
   ? __init_waitqueue_head+0x3b/0x50
   vfs_kern_mount+0x6b/0x170
   do_mount+0x216/0xdc0
   ksys_mount+0x83/0xd0
   __x64_sys_mount+0x25/0x30
   do_syscall_64+0x65/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on dev_name

Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/super.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 3c4aeb83e1c4..77d8d03344c8 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1901,6 +1901,11 @@ static int nfs_parse_devname(const char *dev_name,
 	size_t len;
 	char *end;
 
+	if (unlikely(!dev_name || !*dev_name)) {
+		dfprintk(MOUNT, "NFS: device name not specified\n");
+		return -EINVAL;
+	}
+
 	/* Is the host name protected with square brakcets? */
 	if (*dev_name == '[') {
 		end = strchr(++dev_name, ']');
-- 
2.19.1

[PATCH 4.14 067/135] qed: Fix bug in tx promiscuous mode settings

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9e71a15d8b5bbce25c637f7f8833cd3f45b65646 ]

When running tx switched traffic between VNICs
created via a bridge(to which VFs are added),
adapter drops the unicast packets in tx flow due to
VNIC's ucast mac being unknown to it. But VF interfaces
being in promiscuous mode should have caused adapter
to accept all the unknown ucast packets. Later, it
was found that driver doesn't really configure tx
promiscuous mode settings to accept all unknown unicast macs.

This patch fixes tx promiscuous mode settings to accept all
unknown/unmatched unicast macs and works out the scenario.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 83c1c4fa102b..5191b575d57b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -607,6 +607,10 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn,
 			  (!!(accept_filter & QED_ACCEPT_MCAST_MATCHED) &&
 			   !!(accept_filter & QED_ACCEPT_MCAST_UNMATCHED)));
 
+		SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL,
+			  (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) &&
+			   !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED)));
+
 		SET_FIELD(state, ETH_VPORT_TX_MODE_BCAST_ACCEPT_ALL,
 			  !!(accept_filter & QED_ACCEPT_BCAST));
 
@@ -2640,7 +2644,8 @@ static int qed_configure_filter_rx_mode(struct qed_dev *cdev,
 	if (type == QED_FILTER_RX_MODE_TYPE_PROMISC) {
 		accept_flags.rx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED |
 						 QED_ACCEPT_MCAST_UNMATCHED;
-		accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
+		accept_flags.tx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED |
+						 QED_ACCEPT_MCAST_UNMATCHED;
 	} else if (type == QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC) {
 		accept_flags.rx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
 		accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
-- 
2.19.1

[PATCH 4.14 068/135] qed: Fix LACP pdu drops for VFs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ff9296966e5e00b0d0d00477b2365a178f0f06a3 ]

VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c    |  5 +++++
 drivers/net/ethernet/qlogic/qed/qed_l2.h    |  3 +++
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++--
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 5191b575d57b..4ffdde755db7 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -747,6 +747,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
 		return rc;
 	}
 
+	if (p_params->update_ctl_frame_check) {
+		p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en;
+		p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en;
+	}
+
 	/* Update mcast bins for VFs, PF doesn't use this functionality */
 	qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params);
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
index 91d383f3a661..7c41142452a3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -218,6 +218,9 @@ struct qed_sp_vport_update_params {
 	struct qed_rss_params		*rss_params;
 	struct qed_filter_accept_flags	accept_flags;
 	struct qed_sge_tpa_params	*sge_tpa_params;
+	u8				update_ctl_frame_check;
+	u8				mac_chk_en;
+	u8				ethtype_chk_en;
 };
 
 int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index c6411158afd7..65a53d409e77 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1963,7 +1963,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 	params.vport_id = vf->vport_id;
 	params.max_buffers_per_cqe = start->max_buffers_per_cqe;
 	params.mtu = vf->mtu;
-	params.check_mac = true;
+
+	/* Non trusted VFs should enable control frame filtering */
+	params.check_mac = !vf->p_vf_info.is_trusted_configured;
 
 	rc = qed_sp_eth_vport_start(p_hwfn, &params);
 	if (rc) {
@@ -4910,6 +4912,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		params.opaque_fid = vf->opaque_fid;
 		params.vport_id = vf->vport_id;
 
+		params.update_ctl_frame_check = 1;
+		params.mac_chk_en = !vf_info->is_trusted_configured;
+
 		if (vf_info->rx_accept_mode & mask) {
 			flags->update_rx_mode_config = 1;
 			flags->rx_accept_filter = vf_info->rx_accept_mode;
@@ -4927,7 +4932,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		}
 
 		if (flags->update_rx_mode_config ||
-		    flags->update_tx_mode_config)
+		    flags->update_tx_mode_config ||
+		    params.update_ctl_frame_check)
 			qed_sp_vport_update(hwfn, &params,
 					    QED_SPQ_MODE_EBLOCK, NULL);
 	}
-- 
2.19.1

[PATCH 4.14 069/135] qed: Fix VF probe failure while FLR

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 327852ec64205bb651be391a069784872098a3b2 ]

VFs may hit VF-PF channel timeout while probing, as in some
cases it was observed that VF FLR and VF "acquire" message
transaction (i.e first message from VF to PF in VF's probe flow)
could occur simultaneously which could lead VF to fail sending
"acquire" message to PF as VF is marked disabled from HW perspective
due to FLR, which will result into channel timeout and VF probe failure.

In such cases, try retrying VF "acquire" message so that in later
attempts it could be successful to pass message to PF after the VF
FLR is completed and can be probed successfully.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index dd8ebf6d380f..3220086f99de 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -261,6 +261,7 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn)
 	struct pfvf_acquire_resp_tlv *resp = &p_iov->pf2vf_reply->acquire_resp;
 	struct pf_vf_pfdev_info *pfdev_info = &resp->pfdev_info;
 	struct vf_pf_resc_request *p_resc;
+	u8 retry_cnt = VF_ACQUIRE_THRESH;
 	bool resources_acquired = false;
 	struct vfpf_acquire_tlv *req;
 	int rc = 0, attempts = 0;
@@ -314,6 +315,15 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn)
 
 		/* send acquire request */
 		rc = qed_send_msg2pf(p_hwfn, &resp->hdr.status, sizeof(*resp));
+
+		/* Re-try acquire in case of vf-pf hw channel timeout */
+		if (retry_cnt && rc == -EBUSY) {
+			DP_VERBOSE(p_hwfn, QED_MSG_IOV,
+				   "VF retrying to acquire due to VPC timeout\n");
+			retry_cnt--;
+			continue;
+		}
+
 		if (rc)
 			goto exit;
 
-- 
2.19.1

[PATCH 4.14 070/135] qed: Fix system crash in ll2 xmit

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7c81626a3c37e4ac320b8ad785694ba498f24794 ]

Cache number of fragments in the skb locally as in case
of linear skb (with zero fragments), tx completion
(or freeing of skb) may happen before driver tries
to get number of frgaments from the skb which could
lead to stale access to an already freed skb.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index cef619f0ce10..e82adea55ce9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -2299,19 +2299,24 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb)
 {
 	struct qed_ll2_tx_pkt_info pkt;
 	const skb_frag_t *frag;
+	u8 flags = 0, nr_frags;
 	int rc = -EINVAL, i;
 	dma_addr_t mapping;
 	u16 vlan = 0;
-	u8 flags = 0;
 
 	if (unlikely(skb->ip_summed != CHECKSUM_NONE)) {
 		DP_INFO(cdev, "Cannot transmit a checksumed packet\n");
 		return -EINVAL;
 	}
 
-	if (1 + skb_shinfo(skb)->nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) {
+	/* Cache number of fragments from SKB since SKB may be freed by
+	 * the completion routine after calling qed_ll2_prepare_tx_packet()
+	 */
+	nr_frags = skb_shinfo(skb)->nr_frags;
+
+	if (1 + nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) {
 		DP_ERR(cdev, "Cannot transmit a packet with %d fragments\n",
-		       1 + skb_shinfo(skb)->nr_frags);
+		       1 + nr_frags);
 		return -EINVAL;
 	}
 
@@ -2333,7 +2338,7 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb)
 	}
 
 	memset(&pkt, 0, sizeof(pkt));
-	pkt.num_of_bds = 1 + skb_shinfo(skb)->nr_frags;
+	pkt.num_of_bds = 1 + nr_frags;
 	pkt.vlan = vlan;
 	pkt.bd_flags = flags;
 	pkt.tx_dest = QED_LL2_TX_DEST_NW;
@@ -2341,12 +2346,17 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb)
 	pkt.first_frag_len = skb->len;
 	pkt.cookie = skb;
 
+	/* qed_ll2_prepare_tx_packet() may actually send the packet if
+	 * there are no fragments in the skb and subsequently the completion
+	 * routine may run and free the SKB, so no dereferencing the SKB
+	 * beyond this point unless skb has any fragments.
+	 */
 	rc = qed_ll2_prepare_tx_packet(&cdev->hwfns[0], cdev->ll2->handle,
 				       &pkt, 1);
 	if (rc)
 		goto err;
 
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+	for (i = 0; i < nr_frags; i++) {
 		frag = &skb_shinfo(skb)->frags[i];
 
 		mapping = skb_frag_dma_map(&cdev->pdev->dev, frag, 0,
-- 
2.19.1

[PATCH 4.14 071/135] qed: Fix stack out of bounds bug

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ffb057f98928aa099b08e419bbe5afc26ec9f448 ]

KASAN reported following bug in qed_init_qm_get_idx_from_flags
due to inappropriate casting of "pq_flags". Fix the type of "pq_flags".

[  196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712
[  196.624714]
[  196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1
[  196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018
[  196.624733] Workqueue: events work_for_cpu_fn
[  196.624738] Call trace:
[  196.624742]  dump_backtrace+0x0/0x2f8
[  196.624745]  show_stack+0x24/0x30
[  196.624749]  dump_stack+0xe0/0x11c
[  196.624755]  print_address_description+0x68/0x260
[  196.624759]  kasan_report+0x178/0x340
[  196.624762]  __asan_report_load_n_noabort+0x38/0x48
[  196.624786]  qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624808]  qed_init_qm_info+0xec0/0x2200 [qed]
[  196.624830]  qed_resc_alloc+0x284/0x7e8 [qed]
[  196.624853]  qed_slowpath_start+0x6cc/0x1ae8 [qed]
[  196.624864]  __qede_probe.isra.10+0x1cc/0x12c0 [qede]
[  196.624874]  qede_probe+0x78/0xf0 [qede]
[  196.624879]  local_pci_probe+0xc4/0x180
[  196.624882]  work_for_cpu_fn+0x54/0x98
[  196.624885]  process_one_work+0x758/0x1900
[  196.624888]  worker_thread+0x4e0/0xd18
[  196.624892]  kthread+0x2c8/0x350
[  196.624897]  ret_from_fork+0x10/0x18
[  196.624899]
[  196.624902] Allocated by task 2:
[  196.624906]  kasan_kmalloc.part.1+0x40/0x108
[  196.624909]  kasan_kmalloc+0xb4/0xc8
[  196.624913]  kasan_slab_alloc+0x14/0x20
[  196.624916]  kmem_cache_alloc_node+0x1dc/0x480
[  196.624921]  copy_process.isra.1.part.2+0x1d8/0x4a98
[  196.624924]  _do_fork+0x150/0xfa0
[  196.624926]  kernel_thread+0x48/0x58
[  196.624930]  kthreadd+0x3a4/0x5a0
[  196.624932]  ret_from_fork+0x10/0x18
[  196.624934]
[  196.624937] Freed by task 0:
[  196.624938] (stack is not available)
[  196.624940]
[  196.624943] The buggy address belongs to the object at ffff809b00bc0000
[  196.624943]  which belongs to the cache thread_stack of size 32768
[  196.624946] The buggy address is located 29536 bytes inside of
[  196.624946]  32768-byte region [ffff809b00bc0000, ffff809b00bc8000)
[  196.624948] The buggy address belongs to the page:
[  196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0
[  196.624960] flags: 0xfffff8000008100(slab|head)
[  196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000
[  196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  196.624973] page dumped because: kasan: bad access detected
[  196.624974]
[  196.624976] Memory state around the buggy address:
[  196.624980]  ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624983]  ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2
[  196.624988]                                                        ^
[  196.624990]  ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624993]  ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624995] ==================================================================

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 16953c4ebd71..410528e7d927 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -435,19 +435,19 @@ static void qed_init_qm_pq(struct qed_hwfn *p_hwfn,
 
 /* get pq index according to PQ_FLAGS */
 static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn,
-					   u32 pq_flags)
+					   unsigned long pq_flags)
 {
 	struct qed_qm_info *qm_info = &p_hwfn->qm_info;
 
 	/* Can't have multiple flags set here */
-	if (bitmap_weight((unsigned long *)&pq_flags,
+	if (bitmap_weight(&pq_flags,
 			  sizeof(pq_flags) * BITS_PER_BYTE) > 1) {
-		DP_ERR(p_hwfn, "requested multiple pq flags 0x%x\n", pq_flags);
+		DP_ERR(p_hwfn, "requested multiple pq flags 0x%lx\n", pq_flags);
 		goto err;
 	}
 
 	if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) {
-		DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags);
+		DP_ERR(p_hwfn, "pq flag 0x%lx is not set\n", pq_flags);
 		goto err;
 	}
 
-- 
2.19.1

[PATCH 4.14 072/135] scsi: libfc: free skb when receiving invalid flogi resp

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]

The issue to be fixed in this commit is when libfc found it received a
invalid FLOGI response from FC switch, it would return without freeing the
fc frame, which is just the skb data. This would cause memory leak if FC
switch keeps sending invalid FLOGI responses.

This fix is just to make it execute `fc_frame_free(fp)` before returning
from function `fc_lport_flogi_resp`.

Signed-off-by: Ming Lu <ming.lu@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_lport.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 2fd0ec651170..ca7967e390f1 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1739,14 +1739,14 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	    fc_frame_payload_op(fp) != ELS_LS_ACC) {
 		FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	flp = fc_frame_payload_get(fp, sizeof(*flp));
 	if (!flp) {
 		FC_LPORT_DBG(lport, "FLOGI bad response\n");
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	mfs = ntohs(flp->fl_csp.sp_bb_data) &
@@ -1756,7 +1756,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 		FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
 			     "lport->mfs:%hu\n", mfs, lport->mfs);
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	if (mfs <= lport->mfs) {
-- 
2.19.1

[PATCH 4.14 073/135] scsi: 53c700: pass correct "dev" to dma_alloc_attrs()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8437fcf14deed67e5ad90b5e8abf62fb20f30881 ]

The "hostdata->dev" pointer is NULL here.  We set "hostdata->dev = dev;"
later in the function and we also use "hostdata->dev" when we call
dma_free_attrs() in NCR_700_release().

This bug predates git version control.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/53c700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 6be77b3aa8a5..ac79f2088b31 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -295,7 +295,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	if(tpnt->sdev_attrs == NULL)
 		tpnt->sdev_attrs = NCR_700_dev_attrs;
 
-	memory = dma_alloc_attrs(hostdata->dev, TOTAL_MEM_SIZE, &pScript,
+	memory = dma_alloc_attrs(dev, TOTAL_MEM_SIZE, &pScript,
 				 GFP_KERNEL, DMA_ATTR_NON_CONSISTENT);
 	if(memory == NULL) {
 		printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n");
-- 
2.19.1

[PATCH 4.14 074/135] platform/x86: Fix unmet dependency warning for SAMSUNG_Q10

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0ee4b5f801b73b83a9fb3921d725f2162fd4a2e5 ]

Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
  Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
  Selected by [y]:
  - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 80b87954f6dd..09035705d0a0 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -999,6 +999,7 @@ config INTEL_OAKTRAIL
 config SAMSUNG_Q10
 	tristate "Samsung Q10 Extras"
 	depends on ACPI
+	depends on BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver provides support for backlight control on Samsung Q10
-- 
2.19.1

[PATCH 4.14 075/135] cifs: fix computation for MAX_SMB2_HDR_SIZE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 58d15ed1203f4d858c339ea4d7dafa94bd2a56d3 ]

The size of the fixed part of the create response is 88 bytes not 56.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2pdu.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index e52454059725..bad458a2b579 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -84,8 +84,8 @@
 
 #define NUMBER_OF_SMB2_COMMANDS	0x0013
 
-/* 4 len + 52 transform hdr + 64 hdr + 56 create rsp */
-#define MAX_SMB2_HDR_SIZE 0x00b0
+/* 52 transform hdr + 64 hdr + 88 create rsp */
+#define MAX_SMB2_HDR_SIZE 204
 
 #define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe)
 #define SMB2_TRANSFORM_PROTO_NUM cpu_to_le32(0x424d53fd)
-- 
2.19.1

[PATCH 4.14 076/135] x86/microcode/amd: Dont falsely trick the late loading mechanism

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.

While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.

If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:

  x86/CPU: CPU features have changed after loading microcode, but might not take effect.
  x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.

 [ bp: massage commit message. ]

Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/microcode/amd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9d33dbf2489e..d0a61d3e2fb9 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -707,7 +707,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
 	if (!p) {
 		return ret;
 	} else {
-		if (boot_cpu_data.microcode == p->patch_id)
+		if (boot_cpu_data.microcode >= p->patch_id)
 			return ret;
 
 		ret = UCODE_NEW;
-- 
2.19.1

[PATCH 4.14 077/135] arm64: kprobe: Always blacklist the KVM world-switch code

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f2b3d8566d81deaca31f4e3163def0bea7746e11 ]

On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
 kernel text.

__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.

Move the __hyp_text check in the kprobes blacklist so it applies on
VHE systems too, to cover the common code and guest enter/exit
assembly.

Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/probes/kprobes.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index 0417c929d21a..7d8c33279e9f 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -554,13 +554,13 @@ bool arch_within_kprobe_blacklist(unsigned long addr)
 	    addr < (unsigned long)__entry_text_end) ||
 	    (addr >= (unsigned long)__idmap_text_start &&
 	    addr < (unsigned long)__idmap_text_end) ||
+	    (addr >= (unsigned long)__hyp_text_start &&
+	    addr < (unsigned long)__hyp_text_end) ||
 	    !!search_exception_tables(addr))
 		return true;
 
 	if (!is_kernel_in_hyp_mode()) {
-		if ((addr >= (unsigned long)__hyp_text_start &&
-		    addr < (unsigned long)__hyp_text_end) ||
-		    (addr >= (unsigned long)__hyp_idmap_text_start &&
+		if ((addr >= (unsigned long)__hyp_idmap_text_start &&
 		    addr < (unsigned long)__hyp_idmap_text_end))
 			return true;
 	}
-- 
2.19.1

[PATCH 4.14 078/135] apparmor: Fix aa_label_build() error handling for failed merges

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d6d478aee003e19ef90321176552a8ad2929a47f ]

aa_label_merge() can return NULL for memory allocations failures
make sure to handle and set the correct error in this case.

Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/domain.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c
index dd754b7850a8..67bf8b7ee8a2 100644
--- a/security/apparmor/domain.c
+++ b/security/apparmor/domain.c
@@ -1260,7 +1260,10 @@ int aa_change_profile(const char *fqname, int flags)
 					aa_get_label(&profile->label));
 		if (IS_ERR_OR_NULL(new)) {
 			info = "failed to build target label";
-			error = PTR_ERR(new);
+			if (!new)
+				error = -ENOMEM;
+			else
+				error = PTR_ERR(new);
 			new = NULL;
 			perms.allow = 0;
 			goto audit;
-- 
2.19.1

[PATCH 4.14 079/135] x86/kexec: Dont setup EFI info if EFI runtime is not enabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  #PF error: [normal kernel read fault]
  Call Trace:
   efi_runtime_map_copy+0x28/0x30
   bzImage64_load+0x688/0x872
   arch_kexec_kernel_image_load+0x6d/0x70
   kimage_file_alloc_init+0x13e/0x220
   __x64_sys_kexec_file_load+0x144/0x290
   do_syscall_64+0x55/0x1a0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

 [ bp: Massage commit message. ]

Suggested-by: Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Kairui Song <kasong-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Borislav Petkov <bp-l3A5Bk7waGM@public.gmane.org>
Acked-by: Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: AKASHI Takahiro <takahiro.akashi-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: David Howells <dhowells-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: erik.schmauss-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: fanc.fnst-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org
Cc: "H. Peter Anvin" <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>
Cc: Ingo Molnar <mingo-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: kexec-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Philipp Rudo <prudo-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Cc: rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: robert.moore-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: x86-ml <x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Yannik Sembritzki <yannik-Ed5pum6jkczxnD6Ig1nlyA@public.gmane.org>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/x86/kernel/kexec-bzimage64.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 928b0c6083c9..4d948d87f01c 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -167,6 +167,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
 	struct efi_info *current_ei = &boot_params.efi_info;
 	struct efi_info *ei = &params->efi_info;
 
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
 	if (!current_ei->efi_memmap_size)
 		return 0;
 
-- 
2.19.1

[PATCH 4.14 079/135] x86/kexec: Dont setup EFI info if EFI runtime is not enabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  #PF error: [normal kernel read fault]
  Call Trace:
   efi_runtime_map_copy+0x28/0x30
   bzImage64_load+0x688/0x872
   arch_kexec_kernel_image_load+0x6d/0x70
   kimage_file_alloc_init+0x13e/0x220
   __x64_sys_kexec_file_load+0x144/0x290
   do_syscall_64+0x55/0x1a0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

 [ bp: Massage commit message. ]

Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: bhe@redhat.com
Cc: David Howells <dhowells@redhat.com>
Cc: erik.schmauss@intel.com
Cc: fanc.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kexec@lists.infradead.org
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: rafael.j.wysocki@intel.com
Cc: robert.moore@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yannik Sembritzki <yannik@sembritzki.me>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/kexec-bzimage64.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 928b0c6083c9..4d948d87f01c 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -167,6 +167,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
 	struct efi_info *current_ei = &boot_params.efi_info;
 	struct efi_info *ei = &params->efi_info;
 
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
 	if (!current_ei->efi_memmap_size)
 		return 0;
 
-- 
2.19.1

[PATCH 4.14 079/135] x86/kexec: Dont setup EFI info if EFI runtime is not enabled

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  #PF error: [normal kernel read fault]
  Call Trace:
   efi_runtime_map_copy+0x28/0x30
   bzImage64_load+0x688/0x872
   arch_kexec_kernel_image_load+0x6d/0x70
   kimage_file_alloc_init+0x13e/0x220
   __x64_sys_kexec_file_load+0x144/0x290
   do_syscall_64+0x55/0x1a0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

 [ bp: Massage commit message. ]

Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: bhe@redhat.com
Cc: David Howells <dhowells@redhat.com>
Cc: erik.schmauss@intel.com
Cc: fanc.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kexec@lists.infradead.org
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: rafael.j.wysocki@intel.com
Cc: robert.moore@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yannik Sembritzki <yannik@sembritzki.me>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/kexec-bzimage64.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 928b0c6083c9..4d948d87f01c 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -167,6 +167,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
 	struct efi_info *current_ei = &boot_params.efi_info;
 	struct efi_info *ei = &params->efi_info;
 
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
 	if (!current_ei->efi_memmap_size)
 		return 0;
 
-- 
2.19.1




_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH 4.14 080/135] x86_64: increase stack size for KASAN_EXTRA

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a8e911d13540487942d53137c156bd7707f66e5d ]

If the kernel is configured with KASAN_EXTRA, the stack size is
increasted significantly because this option sets "-fstack-reuse" to
"none" in GCC [1].  As a result, it triggers stack overrun quite often
with 32k stack size compiled using GCC 8.  For example, this reproducer

  https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c

triggers a "corrupted stack end detected inside scheduler" very reliably
with CONFIG_SCHED_STACK_END_CHECK enabled.

There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks.  Some noticiable ones
are

  size
  7648 shrink_page_list
  3584 xfs_rmap_convert
  3312 migrate_page_move_mapping
  3312 dev_ethtool
  3200 migrate_misplaced_transhuge_page
  3168 copy_process

There are other 49 functions are over 2k in size while compiling kernel
with "-Wframe-larger-than=" even with a related minimal config on this
machine.  Hence, it is too much work to change Makefiles for each object
to compile without "-fsanitize-address-use-after-scope" individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23

Although there is a patch in GCC 9 to help the situation, GCC 9 probably
won't be released in a few months and then it probably take another
6-month to 1-year for all major distros to include it as a default.
Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020
when GCC 9 is everywhere.  Until then, this patch will help users avoid
stack overrun.

This has already been fixed for arm64 for the same reason via
6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA").

Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/page_64_types.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 74d531f6d518..50c8baaca4b0 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -7,7 +7,11 @@
 #endif
 
 #ifdef CONFIG_KASAN
+#ifdef CONFIG_KASAN_EXTRA
+#define KASAN_STACK_ORDER 2
+#else
 #define KASAN_STACK_ORDER 1
+#endif
 #else
 #define KASAN_STACK_ORDER 0
 #endif
-- 
2.19.1

[PATCH 4.14 081/135] mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit efad4e475c312456edb3c789d0996d12ed744c13 ]

Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.

Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1].  I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.

We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug:
initialize struct pages for the full memory section") merged and cause a
regression [2][3].  The reason is that there might be memory layouts
when two NUMA nodes share the same memory section so the merged fix is
simply incorrect.

In order to plug this hole we really have to be zone range aware in
those handlers.  I have split up the original patch into two.  One is
unchanged (patch 2) and I took a different approach for `removable'
crash.

[1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948
[3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz

This patch (of 2):

Mikhail has reported the following VM_BUG_ON triggered when reading sysfs
removable state of a memory block:

 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
   is_mem_section_removable+0xb4/0x190
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

The reason is that the memory block spans the zone boundary and we are
stumbling over an unitialized struct page.  Fix this by enforcing zone
range in is_mem_section_removable so that we never run away from a zone.

Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory_hotplug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index c7c74a927d6f..39db89f3df65 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1256,7 +1256,8 @@ static struct page *next_active_pageblock(struct page *page)
 bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
 {
 	struct page *page = pfn_to_page(start_pfn);
-	struct page *end_page = page + nr_pages;
+	unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page)));
+	struct page *end_page = pfn_to_page(end_pfn);
 
 	/* Check the starting page of each pageblock within the range */
 	for (; page < end_page; page = next_active_pageblock(page)) {
-- 
2.19.1

[PATCH 4.14 082/135] mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 24feb47c5fa5b825efb0151f28906dfdad027e61 ]

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct pages access from
test_pages_in_a_zone() function triggered by memory_hotplug sysfs
handlers.

Here are the the panic examples:
 CONFIG_DEBUG_VM_PGFLAGS=y
 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
   test_pages_in_a_zone+0xde/0x160
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix this by checking whether the pfn to check is within the zone.

[mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org

[mhocko@suse.com: separated this change from
http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory_hotplug.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 39db89f3df65..c9d3a49bd4e2 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1297,6 +1297,9 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn,
 				i++;
 			if (i == MAX_ORDER_NR_PAGES || pfn + i >= end_pfn)
 				continue;
+			/* Check if we got outside of the zone */
+			if (zone && !zone_spans_pfn(zone, pfn + i))
+				return 0;
 			page = pfn_to_page(pfn + i);
 			if (zone && page_zone(page) != zone)
 				return 0;
-- 
2.19.1

[PATCH 4.14 083/135] lib/test_kmod.c: potential double free in error handling

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit db7ddeab3ce5d64c9696e70d61f45ea9909cd196 ]

There is a copy and paste bug so we set "config->test_driver" to NULL
twice instead of setting "config->test_fs".  Smatch complains that it
leads to a double free:

  lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed

Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_kmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_kmod.c b/lib/test_kmod.c
index 7abb59ce6613..cf619795a182 100644
--- a/lib/test_kmod.c
+++ b/lib/test_kmod.c
@@ -632,7 +632,7 @@ static void __kmod_config_free(struct test_config *config)
 	config->test_driver = NULL;
 
 	kfree_const(config->test_fs);
-	config->test_driver = NULL;
+	config->test_fs = NULL;
 }
 
 static void kmod_config_free(struct kmod_test_device *test_dev)
-- 
2.19.1

[PATCH 4.14 084/135] fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c27d82f52f75fc9d8d9d40d120d2a96fdeeada5e ]

When superblock has lots of inodes without any pagecache (like is the
case for /proc), drop_pagecache_sb() will iterate through all of them
without dropping sb->s_inode_list_lock which can lead to softlockups
(one of our customers hit this).

Fix the problem by going to the slow path and doing cond_resched() in
case the process needs rescheduling.

Link: http://lkml.kernel.org/r/20190114085343.15011-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/drop_caches.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index 82377017130f..d31b6c72b476 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -21,8 +21,13 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 	spin_lock(&sb->s_inode_list_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
 		spin_lock(&inode->i_lock);
+		/*
+		 * We must skip inodes in unusual state. We may also skip
+		 * inodes without pages but we deliberately won't in case
+		 * we need to reschedule to avoid softlockups.
+		 */
 		if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
-		    (inode->i_mapping->nrpages == 0)) {
+		    (inode->i_mapping->nrpages == 0 && !need_resched())) {
 			spin_unlock(&inode->i_lock);
 			continue;
 		}
@@ -30,6 +35,7 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 		spin_unlock(&inode->i_lock);
 		spin_unlock(&sb->s_inode_list_lock);
 
+		cond_resched();
 		invalidate_mapping_pages(inode->i_mapping, 0, -1);
 		iput(toput_inode);
 		toput_inode = inode;
-- 
2.19.1

[PATCH 4.14 085/135] autofs: drop dentry reference only when it is never used

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]

autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry.  However, dentry is read via autofs_dentry_ino(dentry) after
that.  This may result in a use-free-bug.  The patch drops the reference
count of dentry only when it is never used.

Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/autofs4/expire.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 57725d4a8c59..141f9bc213a3 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -567,7 +567,6 @@ int autofs4_expire_run(struct super_block *sb,
 	pkt.len = dentry->d_name.len;
 	memcpy(pkt.name, dentry->d_name.name, pkt.len);
 	pkt.name[pkt.len] = '\0';
-	dput(dentry);
 
 	if (copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)))
 		ret = -EFAULT;
@@ -580,6 +579,8 @@ int autofs4_expire_run(struct super_block *sb,
 	complete_all(&ino->expire_complete);
 	spin_unlock(&sbi->fs_lock);
 
+	dput(dentry);
+
 	return ret;
 }
 
-- 
2.19.1

[PATCH 4.14 086/135] autofs: fix error return in autofs_fill_super()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f585b283e3f025754c45bbe7533fc6e5c4643700 ]

In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.

Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/autofs4/inode.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 3c7e727612fa..e455388a939c 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -259,8 +259,10 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
 	}
 	root_inode = autofs4_get_inode(s, S_IFDIR | 0755);
 	root = d_make_root(root_inode);
-	if (!root)
+	if (!root) {
+		ret = -ENOMEM;
 		goto fail_ino;
+	}
 	pipe = NULL;
 
 	root->d_fsdata = ino;
-- 
2.19.1

[PATCH 4.14 087/135] ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ef4a55b9197a8f844ea0663138e902dcce3e2f36 ]

We're now getting the following error:

genirq: Setting trigger mode 1 for irq 230 failed
(regmap_irq_set_type+0x0/0x15c)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524

Cc: Sebastian Reichel <sre@kernel.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 4d61e5b1334a..bcced922b280 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -92,7 +92,7 @@
 			interrupts-extended = <
 				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 1
+				&cpcap 48 0
 			>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn", "vbusvld",
-- 
2.19.1

[PATCH 4.14 088/135] arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 369092e17e34..016b84552a62 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -937,6 +937,9 @@
 				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.19.1

[PATCH 4.14 089/135] soc: fsl: qbman: avoid race in clearing QMan interrupt

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that
already occurred, the existing code may acknowledge by
mistake interrupts that occurred after the code checks
for them.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qbman/qman.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 4f27e95efcdd..90892a360c61 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -1048,18 +1048,19 @@ static void qm_mr_process_task(struct work_struct *work);
 static irqreturn_t portal_isr(int irq, void *ptr)
 {
 	struct qman_portal *p = ptr;
-
-	u32 clear = QM_DQAVAIL_MASK | p->irq_sources;
 	u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources;
+	u32 clear = 0;
 
 	if (unlikely(!is))
 		return IRQ_NONE;
 
 	/* DQRR-handling if it's interrupt-driven */
-	if (is & QM_PIRQ_DQRI)
+	if (is & QM_PIRQ_DQRI) {
 		__poll_portal_fast(p, QMAN_POLL_LIMIT);
+		clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI;
+	}
 	/* Handling of anything else that's interrupt-driven */
-	clear |= __poll_portal_slow(p, is);
+	clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW;
 	qm_out(&p->p, QM_REG_ISR, clear);
 	return IRQ_HANDLED;
 }
-- 
2.19.1

[PATCH 4.14 090/135] bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 41ede90fc28f..61396648381e 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3081,10 +3081,12 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 		/* Only some socketops are supported */
 		switch (optname) {
 		case SO_RCVBUF:
+			val = min_t(u32, val, sysctl_rmem_max);
 			sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
 			sk->sk_rcvbuf = max_t(int, val * 2, SOCK_MIN_RCVBUF);
 			break;
 		case SO_SNDBUF:
+			val = min_t(u32, val, sysctl_wmem_max);
 			sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
 			sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF);
 			break;
-- 
2.19.1

[PATCH 4.14 091/135] ARM: pxa: ssp: unneeded to free devm_ allocated data

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-pxa/ssp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..b92673efffff 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -237,8 +237,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	if (ssp == NULL)
 		return -ENODEV;
 
-	iounmap(ssp->mmio_base);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
@@ -248,7 +246,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
 
-	kfree(ssp);
 	return 0;
 }
 
-- 
2.19.1

[PATCH 4.14 092/135] arm64: dts: add msm8996 compatible to gicv3

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ab00be277c6f..6f372ec055dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -359,7 +359,7 @@
 		};
 
 		intc: interrupt-controller@9bc0000 {
-			compatible = "arm,gic-v3";
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
-- 
2.19.1

[PATCH 4.14 093/135] DTS: CI20: Fix bugs in ci20s device tree.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1ca1c87f91d9dc50d6a38e2177b2032996e7901c ]

According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index a4cc52214dbd..dad4aa0ebdd8 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -54,7 +54,7 @@
 	status = "okay";
 
 	pinctrl-names = "default";
-	pinctrl-0 = <&pins_uart2>;
+	pinctrl-0 = <&pins_uart3>;
 };
 
 &uart4 {
@@ -174,9 +174,9 @@
 		bias-disable;
 	};
 
-	pins_uart2: uart2 {
-		function = "uart2";
-		groups = "uart2-data", "uart2-hwflow";
+	pins_uart3: uart3 {
+		function = "uart3";
+		groups = "uart3-data", "uart3-hwflow";
 		bias-disable;
 	};
 
-- 
2.19.1

[PATCH 4.14 094/135] usb: phy: fix link errors

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index aff702c0eb9f..85a92d0813dd 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
-- 
2.19.1

[PATCH 4.14 095/135] irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mmp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 25f32e1d7764..3496b61a312a 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -34,6 +34,9 @@
 #define SEL_INT_PENDING		(1 << 6)
 #define SEL_INT_NUM_MASK	0x3f
 
+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ	(1 << 5)
+#define MMP2_ICU_INT_ROUTE_PJ4_FIQ	(1 << 6)
+
 struct icu_chip_data {
 	int			nr_irqs;
 	unsigned int		virq_base;
@@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = {
 static const struct mmp_intc_conf mmp2_conf = {
 	.conf_enable	= 0x20,
 	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
+	.conf_mask	= MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
 };
 
 static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
-- 
2.19.1

[PATCH 4.14 096/135] net: stmmac: Fallback to Platform Data clock in Watchdog conversion

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   | 14 ++++++++++----
 include/linux/stmmac.h                             |  1 +
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index c3c6335cbe9a..ecddd9948788 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -702,8 +702,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (usec * (clk / 1000000)) / 256;
 }
@@ -712,8 +715,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (riwt * 256) / (clk / 1000000);
 }
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 32feac5bbd75..5844105a482b 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -183,6 +183,7 @@ struct plat_stmmacenet_data {
 	struct clk *pclk;
 	struct clk *clk_ptp_ref;
 	unsigned int clk_ptp_rate;
+	unsigned int clk_ref_rate;
 	struct reset_control *stmmac_rst;
 	struct stmmac_axi *axi;
 	int has_gmac4;
-- 
2.19.1

[PATCH 4.14 097/135] net: stmmac: Send TSO packets always from Queue 0

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]

The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.

Lets always send TSO packets from Queue 0.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0e66a5082140..b1454c63e675 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3019,8 +3019,17 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
-		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
+		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
+			/*
+			 * There is no way to determine the number of TSO
+			 * capable Queues. Let's use always the Queue 0
+			 * because if TSO is supported then at least this
+			 * one will be capable.
+			 */
+			skb_set_queue_mapping(skb, 0);
+
 			return stmmac_tso_xmit(skb, dev);
+		}
 	}
 
 	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
-- 
2.19.1

[PATCH 4.14 098/135] net: stmmac: Disable EEE mode earlier in XMIT callback

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e2cd682deb231ba6f80524bb84e57e7138261149 ]

In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.

Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b1454c63e675..0cc83e8417ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3017,6 +3017,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_q = &priv->tx_queue[queue];
 
+	if (priv->tx_path_in_lpi_mode)
+		stmmac_disable_eee_mode(priv);
+
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
 		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
@@ -3044,9 +3047,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (priv->tx_path_in_lpi_mode)
-		stmmac_disable_eee_mode(priv);
-
 	entry = tx_q->cur_tx;
 	first_entry = entry;
 
-- 
2.19.1

[PATCH 4.14 099/135] irqchip/gic-v3-its: Fix ITT_entry_size accessor

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.

Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/irqchip/arm-gic-v3.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index bacb499c512c..845ff8c51564 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -306,7 +306,7 @@
 #define GITS_TYPER_PLPIS		(1UL << 0)
 #define GITS_TYPER_VLPIS		(1UL << 1)
 #define GITS_TYPER_ITT_ENTRY_SIZE_SHIFT	4
-#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0x1f) + 1)
+#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0xf) + 1)
 #define GITS_TYPER_IDBITS_SHIFT		8
 #define GITS_TYPER_DEVBITS_SHIFT	13
 #define GITS_TYPER_DEVBITS(r)		((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
-- 
2.19.1

[PATCH 4.14 100/135] relay: check return of create_buf_file() properly

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ]

If create_buf_file() returns an error, don't try to reference it later
as a valid dentry pointer.

This problem was exposed when debugfs started to return errors instead
of just NULL for some calls when they do not succeed properly.

Also, the check for WARN_ON(dentry) was just wrong :)

Reported-by: Kees Cook <keescook@chromium.org>
Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/relay.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/relay.c b/kernel/relay.c
index 1537158c67b3..61d37e6da22d 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -427,6 +427,8 @@ static struct dentry *relay_create_buf_file(struct rchan *chan,
 	dentry = chan->cb->create_buf_file(tmpname, chan->parent,
 					   S_IRUSR, buf,
 					   &chan->is_global);
+	if (IS_ERR(dentry))
+		dentry = NULL;
 
 	kfree(tmpname);
 
@@ -460,7 +462,7 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu)
 		dentry = chan->cb->create_buf_file(NULL, NULL,
 						   S_IRUSR, buf,
 						   &chan->is_global);
-		if (WARN_ON(dentry))
+		if (IS_ERR_OR_NULL(dentry))
 			goto free_buf;
 	}
 
-- 
2.19.1

[PATCH 4.14 101/135] bpf, selftests: fix handling of sparse CPU allocations

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]

Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.

E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.

This patch fixes the function by making it parse all CPU ranges and
elements.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/bpf_util.h | 30 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h
index d0811b3d6a6f..4bf720364934 100644
--- a/tools/testing/selftests/bpf/bpf_util.h
+++ b/tools/testing/selftests/bpf/bpf_util.h
@@ -13,7 +13,7 @@ static inline unsigned int bpf_num_possible_cpus(void)
 	unsigned int start, end, possible_cpus = 0;
 	char buff[128];
 	FILE *fp;
-	int n;
+	int len, n, i, j = 0;
 
 	fp = fopen(fcpu, "r");
 	if (!fp) {
@@ -21,17 +21,27 @@ static inline unsigned int bpf_num_possible_cpus(void)
 		exit(1);
 	}
 
-	while (fgets(buff, sizeof(buff), fp)) {
-		n = sscanf(buff, "%u-%u", &start, &end);
-		if (n == 0) {
-			printf("Failed to retrieve # possible CPUs!\n");
-			exit(1);
-		} else if (n == 1) {
-			end = start;
+	if (!fgets(buff, sizeof(buff), fp)) {
+		printf("Failed to read %s!\n", fcpu);
+		exit(1);
+	}
+
+	len = strlen(buff);
+	for (i = 0; i <= len; i++) {
+		if (buff[i] == ',' || buff[i] == '\0') {
+			buff[i] = '\0';
+			n = sscanf(&buff[j], "%u-%u", &start, &end);
+			if (n <= 0) {
+				printf("Failed to retrieve # possible CPUs!\n");
+				exit(1);
+			} else if (n == 1) {
+				end = start;
+			}
+			possible_cpus += end - start + 1;
+			j = i + 1;
 		}
-		possible_cpus = start == 0 ? end + 1 : 0;
-		break;
 	}
+
 	fclose(fp);
 
 	return possible_cpus;
-- 
2.19.1

[PATCH 4.14 102/135] bpf: fix lockdep false positive in percpu_freelist

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a89fac57b5d080771efd4d71feaae19877cf68f0 ]

Lockdep warns about false positive:
[   12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40
[   12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past:
[   12.493275]  (&rq->lock){-.-.}
[   12.493276]
[   12.493276]
[   12.493276] and interrupts could create inverse lock ordering between them.
[   12.493276]
[   12.494435]
[   12.494435] other info that might help us debug this:
[   12.494979]  Possible interrupt unsafe locking scenario:
[   12.494979]
[   12.495518]        CPU0                    CPU1
[   12.495879]        ----                    ----
[   12.496243]   lock(&head->lock);
[   12.496502]                                local_irq_disable();
[   12.496969]                                lock(&rq->lock);
[   12.497431]                                lock(&head->lock);
[   12.497890]   <Interrupt>
[   12.498104]     lock(&rq->lock);
[   12.498368]
[   12.498368]  *** DEADLOCK ***
[   12.498368]
[   12.498837] 1 lock held by dd/276:
[   12.499110]  #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240
[   12.499747]
[   12.499747] the shortest dependencies between 2nd lock and 1st lock:
[   12.500389]  -> (&rq->lock){-.-.} {
[   12.500669]     IN-HARDIRQ-W at:
[   12.500934]                       _raw_spin_lock+0x2f/0x40
[   12.501373]                       scheduler_tick+0x4c/0xf0
[   12.501812]                       update_process_times+0x40/0x50
[   12.502294]                       tick_periodic+0x27/0xb0
[   12.502723]                       tick_handle_periodic+0x1f/0x60
[   12.503203]                       timer_interrupt+0x11/0x20
[   12.503651]                       __handle_irq_event_percpu+0x43/0x2c0
[   12.504167]                       handle_irq_event_percpu+0x20/0x50
[   12.504674]                       handle_irq_event+0x37/0x60
[   12.505139]                       handle_level_irq+0xa7/0x120
[   12.505601]                       handle_irq+0xa1/0x150
[   12.506018]                       do_IRQ+0x77/0x140
[   12.506411]                       ret_from_intr+0x0/0x1d
[   12.506834]                       _raw_spin_unlock_irqrestore+0x53/0x60
[   12.507362]                       __setup_irq+0x481/0x730
[   12.507789]                       setup_irq+0x49/0x80
[   12.508195]                       hpet_time_init+0x21/0x32
[   12.508644]                       x86_late_time_init+0xb/0x16
[   12.509106]                       start_kernel+0x390/0x42a
[   12.509554]                       secondary_startup_64+0xa4/0xb0
[   12.510034]     IN-SOFTIRQ-W at:
[   12.510305]                       _raw_spin_lock+0x2f/0x40
[   12.510772]                       try_to_wake_up+0x1c7/0x4e0
[   12.511220]                       swake_up_locked+0x20/0x40
[   12.511657]                       swake_up_one+0x1a/0x30
[   12.512070]                       rcu_process_callbacks+0xc5/0x650
[   12.512553]                       __do_softirq+0xe6/0x47b
[   12.512978]                       irq_exit+0xc3/0xd0
[   12.513372]                       smp_apic_timer_interrupt+0xa9/0x250
[   12.513876]                       apic_timer_interrupt+0xf/0x20
[   12.514343]                       default_idle+0x1c/0x170
[   12.514765]                       do_idle+0x199/0x240
[   12.515159]                       cpu_startup_entry+0x19/0x20
[   12.515614]                       start_kernel+0x422/0x42a
[   12.516045]                       secondary_startup_64+0xa4/0xb0
[   12.516521]     INITIAL USE at:
[   12.516774]                      _raw_spin_lock_irqsave+0x38/0x50
[   12.517258]                      rq_attach_root+0x16/0xd0
[   12.517685]                      sched_init+0x2f2/0x3eb
[   12.518096]                      start_kernel+0x1fb/0x42a
[   12.518525]                      secondary_startup_64+0xa4/0xb0
[   12.518986]   }
[   12.519132]   ... key      at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8
[   12.519649]   ... acquired at:
[   12.519892]    pcpu_freelist_pop+0x7b/0xd0
[   12.520221]    bpf_get_stackid+0x1d2/0x4d0
[   12.520563]    ___bpf_prog_run+0x8b4/0x11a0
[   12.520887]
[   12.521008] -> (&head->lock){+...} {
[   12.521292]    HARDIRQ-ON-W at:
[   12.521539]                     _raw_spin_lock+0x2f/0x40
[   12.521950]                     pcpu_freelist_push+0x2a/0x40
[   12.522396]                     bpf_get_stackid+0x494/0x4d0
[   12.522828]                     ___bpf_prog_run+0x8b4/0x11a0
[   12.523296]    INITIAL USE at:
[   12.523537]                    _raw_spin_lock+0x2f/0x40
[   12.523944]                    pcpu_freelist_populate+0xc0/0x120
[   12.524417]                    htab_map_alloc+0x405/0x500
[   12.524835]                    __do_sys_bpf+0x1a3/0x1a90
[   12.525253]                    do_syscall_64+0x4a/0x180
[   12.525659]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   12.526167]  }
[   12.526311]  ... key      at: [<ffffffff838f7668>] __key.13130+0x0/0x8
[   12.526812]  ... acquired at:
[   12.527047]    __lock_acquire+0x521/0x1350
[   12.527371]    lock_acquire+0x98/0x190
[   12.527680]    _raw_spin_lock+0x2f/0x40
[   12.527994]    pcpu_freelist_push+0x2a/0x40
[   12.528325]    bpf_get_stackid+0x494/0x4d0
[   12.528645]    ___bpf_prog_run+0x8b4/0x11a0
[   12.528970]
[   12.529092]
[   12.529092] stack backtrace:
[   12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475
[   12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   12.530750] Call Trace:
[   12.530948]  dump_stack+0x5f/0x8b
[   12.531248]  check_usage_backwards+0x10c/0x120
[   12.531598]  ? ___bpf_prog_run+0x8b4/0x11a0
[   12.531935]  ? mark_lock+0x382/0x560
[   12.532229]  mark_lock+0x382/0x560
[   12.532496]  ? print_shortest_lock_dependencies+0x180/0x180
[   12.532928]  __lock_acquire+0x521/0x1350
[   12.533271]  ? find_get_entry+0x17f/0x2e0
[   12.533586]  ? find_get_entry+0x19c/0x2e0
[   12.533902]  ? lock_acquire+0x98/0x190
[   12.534196]  lock_acquire+0x98/0x190
[   12.534482]  ? pcpu_freelist_push+0x2a/0x40
[   12.534810]  _raw_spin_lock+0x2f/0x40
[   12.535099]  ? pcpu_freelist_push+0x2a/0x40
[   12.535432]  pcpu_freelist_push+0x2a/0x40
[   12.535750]  bpf_get_stackid+0x494/0x4d0
[   12.536062]  ___bpf_prog_run+0x8b4/0x11a0

It has been explained that is a false positive here:
https://lkml.org/lkml/2018/7/25/756
Recap:
- stackmap uses pcpu_freelist
- The lock in pcpu_freelist is a percpu lock
- stackmap is only used by tracing bpf_prog
- A tracing bpf_prog cannot be run if another bpf_prog
  has already been running (ensured by the percpu bpf_prog_active counter).

Eric pointed out that this lockdep splats stops other
legit lockdep splats in selftests/bpf/test_progs.c.

Fix this by calling local_irq_save/restore for stackmap.

Another false positive had also been worked around by calling
local_irq_save in commit 89ad2fa3f043 ("bpf: fix lockdep splat").
That commit added unnecessary irq_save/restore to fast path of
bpf hash map. irqs are already disabled at that point, since htab
is holding per bucket spin_lock with irqsave.

Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop
function w/o irqsave and convert pcpu_freelist_push/pop to irqsave
to be used elsewhere (right now only in stackmap).
It stops lockdep false positive in stackmap with a bit of acceptable overhead.

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c         |  4 ++--
 kernel/bpf/percpu_freelist.c | 41 +++++++++++++++++++++++++-----------
 kernel/bpf/percpu_freelist.h |  4 ++++
 3 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 3d0ecc273cc6..84237f640789 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -655,7 +655,7 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 	}
 
 	if (htab_is_prealloc(htab)) {
-		pcpu_freelist_push(&htab->freelist, &l->fnode);
+		__pcpu_freelist_push(&htab->freelist, &l->fnode);
 	} else {
 		atomic_dec(&htab->count);
 		l->htab = htab;
@@ -717,7 +717,7 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key,
 		} else {
 			struct pcpu_freelist_node *l;
 
-			l = pcpu_freelist_pop(&htab->freelist);
+			l = __pcpu_freelist_pop(&htab->freelist);
 			if (!l)
 				return ERR_PTR(-E2BIG);
 			l_new = container_of(l, struct htab_elem, fnode);
diff --git a/kernel/bpf/percpu_freelist.c b/kernel/bpf/percpu_freelist.c
index 673fa6fe2d73..0c1b4ba9e90e 100644
--- a/kernel/bpf/percpu_freelist.c
+++ b/kernel/bpf/percpu_freelist.c
@@ -28,8 +28,8 @@ void pcpu_freelist_destroy(struct pcpu_freelist *s)
 	free_percpu(s->freelist);
 }
 
-static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
-					struct pcpu_freelist_node *node)
+static inline void ___pcpu_freelist_push(struct pcpu_freelist_head *head,
+					 struct pcpu_freelist_node *node)
 {
 	raw_spin_lock(&head->lock);
 	node->next = head->first;
@@ -37,12 +37,22 @@ static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
 	raw_spin_unlock(&head->lock);
 }
 
-void pcpu_freelist_push(struct pcpu_freelist *s,
+void __pcpu_freelist_push(struct pcpu_freelist *s,
 			struct pcpu_freelist_node *node)
 {
 	struct pcpu_freelist_head *head = this_cpu_ptr(s->freelist);
 
-	__pcpu_freelist_push(head, node);
+	___pcpu_freelist_push(head, node);
+}
+
+void pcpu_freelist_push(struct pcpu_freelist *s,
+			struct pcpu_freelist_node *node)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__pcpu_freelist_push(s, node);
+	local_irq_restore(flags);
 }
 
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
@@ -63,7 +73,7 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	for_each_possible_cpu(cpu) {
 again:
 		head = per_cpu_ptr(s->freelist, cpu);
-		__pcpu_freelist_push(head, buf);
+		___pcpu_freelist_push(head, buf);
 		i++;
 		buf += elem_size;
 		if (i == nr_elems)
@@ -74,14 +84,12 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	local_irq_restore(flags);
 }
 
-struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
 {
 	struct pcpu_freelist_head *head;
 	struct pcpu_freelist_node *node;
-	unsigned long flags;
 	int orig_cpu, cpu;
 
-	local_irq_save(flags);
 	orig_cpu = cpu = raw_smp_processor_id();
 	while (1) {
 		head = per_cpu_ptr(s->freelist, cpu);
@@ -89,16 +97,25 @@ struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
 		node = head->first;
 		if (node) {
 			head->first = node->next;
-			raw_spin_unlock_irqrestore(&head->lock, flags);
+			raw_spin_unlock(&head->lock);
 			return node;
 		}
 		raw_spin_unlock(&head->lock);
 		cpu = cpumask_next(cpu, cpu_possible_mask);
 		if (cpu >= nr_cpu_ids)
 			cpu = 0;
-		if (cpu == orig_cpu) {
-			local_irq_restore(flags);
+		if (cpu == orig_cpu)
 			return NULL;
-		}
 	}
 }
+
+struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+{
+	struct pcpu_freelist_node *ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = __pcpu_freelist_pop(s);
+	local_irq_restore(flags);
+	return ret;
+}
diff --git a/kernel/bpf/percpu_freelist.h b/kernel/bpf/percpu_freelist.h
index 3049aae8ea1e..c3960118e617 100644
--- a/kernel/bpf/percpu_freelist.h
+++ b/kernel/bpf/percpu_freelist.h
@@ -22,8 +22,12 @@ struct pcpu_freelist_node {
 	struct pcpu_freelist_node *next;
 };
 
+/* pcpu_freelist_* do spin_lock_irqsave. */
 void pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
 struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *);
+/* __pcpu_freelist_* do spin_lock only. caller must disable irqs. */
+void __pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *);
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 			    u32 nr_elems);
 int pcpu_freelist_init(struct pcpu_freelist *);
-- 
2.19.1

[PATCH 4.14 103/135] drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 7b909d814d38..095bd6b4ae80 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -371,6 +371,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 		dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
 		return PTR_ERR(tcon->sclk0);
 	}
+	clk_prepare_enable(tcon->sclk0);
 
 	if (tcon->quirks->has_channel_1) {
 		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
@@ -385,6 +386,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 
 static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
 {
+	clk_disable_unprepare(tcon->sclk0);
 	clk_disable_unprepare(tcon->clk);
 }
 
-- 
2.19.1

[PATCH 4.14 104/135] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 94236ec9d410..4db2cd1c611d 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock_bh(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
-- 
2.19.1

[PATCH 4.14 105/135] vsock/virtio: fix kernel panic after device hot-unplug

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index fdb294441682..8cdf6ddec9b7 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -75,6 +75,9 @@ static u32 virtio_transport_get_local_cid(void)
 {
 	struct virtio_vsock *vsock = virtio_vsock_get();
 
+	if (!vsock)
+		return VMADDR_CID_ANY;
+
 	return vsock->guest_cid;
 }
 
@@ -584,10 +587,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 
 	virtio_vsock_update_guest_cid(vsock);
 
-	ret = vsock_core_init(&virtio_transport.transport);
-	if (ret < 0)
-		goto out_vqs;
-
 	vsock->rx_buf_nr = 0;
 	vsock->rx_buf_max_nr = 0;
 	atomic_set(&vsock->queued_replies, 0);
@@ -618,8 +617,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 	mutex_unlock(&the_virtio_vsock_mutex);
 	return 0;
 
-out_vqs:
-	vsock->vdev->config->del_vqs(vsock->vdev);
 out:
 	kfree(vsock);
 	mutex_unlock(&the_virtio_vsock_mutex);
@@ -669,7 +666,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 
 	mutex_lock(&the_virtio_vsock_mutex);
 	the_virtio_vsock = NULL;
-	vsock_core_exit();
 	mutex_unlock(&the_virtio_vsock_mutex);
 
 	vdev->config->del_vqs(vdev);
@@ -702,14 +698,28 @@ static int __init virtio_vsock_init(void)
 	virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0);
 	if (!virtio_vsock_workqueue)
 		return -ENOMEM;
+
 	ret = register_virtio_driver(&virtio_vsock_driver);
 	if (ret)
-		destroy_workqueue(virtio_vsock_workqueue);
+		goto out_wq;
+
+	ret = vsock_core_init(&virtio_transport.transport);
+	if (ret)
+		goto out_vdr;
+
+	return 0;
+
+out_vdr:
+	unregister_virtio_driver(&virtio_vsock_driver);
+out_wq:
+	destroy_workqueue(virtio_vsock_workqueue);
 	return ret;
+
 }
 
 static void __exit virtio_vsock_exit(void)
 {
+	vsock_core_exit();
 	unregister_virtio_driver(&virtio_vsock_driver);
 	destroy_workqueue(virtio_vsock_workqueue);
 }
-- 
2.19.1

[PATCH 4.14 106/135] vsock/virtio: reset connected sockets on device removal

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 85965487abc540368393a15491e6e7fcd230039d ]

When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 8cdf6ddec9b7..2ff751eba037 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -634,6 +634,9 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	flush_work(&vsock->event_work);
 	flush_work(&vsock->send_pkt_work);
 
+	/* Reset all connected sockets when the device disappear */
+	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+
 	vdev->config->reset(vdev);
 
 	mutex_lock(&vsock->rx_lock);
-- 
2.19.1

[PATCH 4.14 107/135] dmaengine: dmatest: Abort test in case of mapping error

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmatest.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 80cc2be6483c..e39336127741 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -626,11 +626,9 @@ static int dmatest_func(void *data)
 			srcs[i] = um->addr[i] + src_off;
 			ret = dma_mapping_error(dev->dev, um->addr[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("src mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->to_cnt++;
 		}
@@ -645,11 +643,9 @@ static int dmatest_func(void *data)
 					       DMA_BIDIRECTIONAL);
 			ret = dma_mapping_error(dev->dev, dsts[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("dst mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->bidi_cnt++;
 		}
@@ -679,12 +675,10 @@ static int dmatest_func(void *data)
 		}
 
 		if (!tx) {
-			dmaengine_unmap_put(um);
 			result("prep error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		done->done = false;
@@ -693,12 +687,10 @@ static int dmatest_func(void *data)
 		cookie = tx->tx_submit(tx);
 
 		if (dma_submit_error(cookie)) {
-			dmaengine_unmap_put(um);
 			result("submit error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 		dma_async_issue_pending(chan);
 
@@ -711,16 +703,14 @@ static int dmatest_func(void *data)
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		} else if (status != DMA_COMPLETE) {
 			dmaengine_unmap_put(um);
 			result(status == DMA_ERROR ?
 			       "completion error status" :
 			       "completion busy status", total_tests, src_off,
 			       dst_off, len, ret);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		dmaengine_unmap_put(um);
@@ -765,6 +755,12 @@ static int dmatest_func(void *data)
 			verbose_result("test passed", total_tests, src_off,
 				       dst_off, len, 0);
 		}
+
+		continue;
+
+error_unmap_continue:
+		dmaengine_unmap_put(um);
+		failed_tests++;
 	}
 	ktime = ktime_sub(ktime_get(), ktime);
 	ktime = ktime_sub(ktime, comparetime);
-- 
2.19.1

[PATCH 4.14 108/135] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]

In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y

Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/config | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
index 1017313e41a8..59caa8f71cd8 100644
--- a/tools/testing/selftests/netfilter/config
+++ b/tools/testing/selftests/netfilter/config
@@ -1,2 +1,2 @@
 CONFIG_NET_NS=y
-NF_TABLES_INET=y
+CONFIG_NF_TABLES_INET=y
-- 
2.19.1

[PATCH 4.14 109/135] selftests: netfilter: add simple masq/redirect test cases

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/Makefile   |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++
 2 files changed, 763 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 47ed6cef93fb..c9ff2b47bd1c 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for netfilter selftests
 
-TEST_PROGS := nft_trans_stress.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
new file mode 100755
index 000000000000..8ec76681605c
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -0,0 +1,762 @@
+#!/bin/bash
+#
+# This test is for basic NAT functionality: snat, dnat, redirect, masquerade.
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add ns0
+ip netns add ns1
+ip netns add ns2
+
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+
+ip -net ns0 link set lo up
+ip -net ns0 link set veth0 up
+ip -net ns0 addr add 10.0.1.1/24 dev veth0
+ip -net ns0 addr add dead:1::1/64 dev veth0
+
+ip -net ns0 link set veth1 up
+ip -net ns0 addr add 10.0.2.1/24 dev veth1
+ip -net ns0 addr add dead:2::1/64 dev veth1
+
+for i in 1 2; do
+  ip -net ns$i link set lo up
+  ip -net ns$i link set eth0 up
+  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i route add default via 10.0.$i.1
+  ip -net ns$i addr add dead:$i::99/64 dev eth0
+  ip -net ns$i route add default via dead:$i::1
+done
+
+bad_counter()
+{
+	local ns=$1
+	local counter=$2
+	local expect=$3
+
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+	ip netns exec $ns nft list counter inet filter $counter 1>&2
+}
+
+check_counters()
+{
+	ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in "packets 1 bytes 84"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out "packets 1 bytes 84"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in6 "$expect"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out6 "$expect"
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_ns0_counters()
+{
+	local ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out "packets 0 bytes 0"
+		lret=1
+	fi
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		expect="packets 1 bytes 84"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir "$expect"
+			lret=1
+		fi
+
+		expect="packets 1 bytes 104"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir6 "$expect"
+			lret=1
+		fi
+	done
+
+	return $lret
+}
+
+reset_counters()
+{
+	for i in 0 1 2;do
+		ip netns exec ns$i nft reset counters inet > /dev/null
+	done
+}
+
+test_local_dnat6()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip6 daddr dead:1::99 dnat to dead:2::99
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add ip6 dnat hook"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping6 failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2"
+	ip netns exec ns0 nft flush chain ip6 nat output
+
+	return $lret
+}
+
+test_local_dnat()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip daddr 10.0.1.99 dnat to 10.0.2.99
+	}
+}
+EOF
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2"
+
+	ip netns exec ns0 nft flush chain ip nat output
+
+	reset_counters
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 count in ns1
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 packet in ns2
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush"
+
+	return $lret
+}
+
+
+test_masquerade6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+		return 1
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip6 nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush ip6 nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2"
+
+	return $lret
+}
+
+test_masquerade()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: canot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP masquerade for ns2"
+
+	return $lret
+}
+
+test_redirect6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip6 nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete ip6 nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2"
+
+	return $lret
+}
+
+test_redirect()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP redirection for ns2"
+
+	return $lret
+}
+
+
+# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+for i in 0 1 2; do
+ip netns exec ns$i nft -f - <<EOF
+table inet filter {
+	counter ns0in {}
+	counter ns1in {}
+	counter ns2in {}
+
+	counter ns0out {}
+	counter ns1out {}
+	counter ns2out {}
+
+	counter ns0in6 {}
+	counter ns1in6 {}
+	counter ns2in6 {}
+
+	counter ns0out6 {}
+	counter ns1out6 {}
+	counter ns2out6 {}
+
+	map nsincounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0in",
+			     10.0.2.1 : "ns0in",
+			     10.0.1.99 : "ns1in",
+			     10.0.2.99 : "ns2in" }
+	}
+
+	map nsincounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0in6",
+			     dead:2::1 : "ns0in6",
+			     dead:1::99 : "ns1in6",
+			     dead:2::99 : "ns2in6" }
+	}
+
+	map nsoutcounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0out",
+			     10.0.2.1 : "ns0out",
+			     10.0.1.99: "ns1out",
+			     10.0.2.99: "ns2out" }
+	}
+
+	map nsoutcounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0out6",
+			     dead:2::1 : "ns0out6",
+			     dead:1::99 : "ns1out6",
+			     dead:2::99 : "ns2out6" }
+	}
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		counter name ip saddr map @nsincounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		counter name ip daddr map @nsoutcounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6
+	}
+}
+EOF
+done
+
+sleep 3
+# test basic connectivity
+for i in 1 2; do
+  ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+  if [ $? -ne 0 ];then
+  	echo "ERROR: Could not reach other namespace(s)" 1>&2
+	ret=1
+  fi
+
+  ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+  if [ $? -ne 0 ];then
+	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
+	ret=1
+  fi
+  check_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+
+  check_ns0_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+  reset_counters
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+fi
+
+reset_counters
+test_local_dnat
+test_local_dnat6
+
+reset_counters
+test_masquerade
+test_masquerade6
+
+reset_counters
+test_redirect
+test_redirect6
+
+for i in 0 1 2; do ip netns del ns$i;done
+
+exit $ret
-- 
2.19.1

[PATCH 4.14 110/135] netfilter: nf_nat: skip nat clash resolution for same-origin entries

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index b793b55d1488..f07357ba9629 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -869,6 +869,22 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
 		}
 
 		if (nf_ct_key_equal(h, tuple, zone, net)) {
+			/* Tuple is taken already, so caller will need to find
+			 * a new source port to use.
+			 *
+			 * Only exception:
+			 * If the *original tuples* are identical, then both
+			 * conntracks refer to the same flow.
+			 * This is a rare situation, it can occur e.g. when
+			 * more than one UDP packet is sent from same socket
+			 * in different threads.
+			 *
+			 * Let nf_ct_resolve_clash() deal with this later.
+			 */
+			if (nf_ct_tuple_equal(&ignored_conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+					      &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple))
+				continue;
+
 			NF_CT_STAT_INC_ATOMIC(net, found);
 			rcu_read_unlock();
 			return 1;
-- 
2.19.1

[PATCH 4.14 111/135] s390/qeth: fix use-after-free in error path

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 69ef5f4060ed..6566fceef38d 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2472,11 +2472,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx)
 	return rc;
 }
 
-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q)
+static void qeth_free_output_queue(struct qeth_qdio_out_q *q)
 {
 	if (!q)
 		return;
 
+	qeth_clear_outq_buffers(q, 1);
 	qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
 	kfree(q);
 }
@@ -2549,10 +2550,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card)
 		card->qdio.out_qs[i]->bufs[j] = NULL;
 	}
 out_freeoutq:
-	while (i > 0) {
-		qeth_free_qdio_out_buf(card->qdio.out_qs[--i]);
-		qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-	}
+	while (i > 0)
+		qeth_free_output_queue(card->qdio.out_qs[--i]);
 	kfree(card->qdio.out_qs);
 	card->qdio.out_qs = NULL;
 out_freepool:
@@ -2585,10 +2584,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card)
 	qeth_free_buffer_pool(card);
 	/* free outbound qdio_qs */
 	if (card->qdio.out_qs) {
-		for (i = 0; i < card->qdio.no_out_queues; ++i) {
-			qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-			qeth_free_qdio_out_buf(card->qdio.out_qs[i]);
-		}
+		for (i = 0; i < card->qdio.no_out_queues; i++)
+			qeth_free_output_queue(card->qdio.out_qs[i]);
 		kfree(card->qdio.out_qs);
 		card->qdio.out_qs = NULL;
 	}
-- 
2.19.1

[PATCH 4.14 112/135] perf symbols: Filter out hidden symbols from labels

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:

  # nm perf | grep annobin | head -10
  0000000000241100 t .annobin_annotate.c
  0000000000326490 t .annobin_annotate.c
  0000000000249255 t .annobin_annotate.c_end
  00000000003283a8 t .annobin_annotate.c_end
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bc3e2 t .annobin_annotate.c_end.unlikely
  00000000001bc400 t .annobin_annotate.c_end.unlikely
  00000000001bce18 t .annobin_annotate.c.hot
  00000000001bce18 t .annobin_annotate.c.hot
  ...

Those symbols have no use for report or annotation and should be
skipped.  Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:

  # perf test dwarf -v
  59: Test dwarf unwind                                     :
  --- start ---
  test child forked, pid 8515
  unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
  ...
  got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
  unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

  # readelf -s ./perf | grep annobin | head -1
    40: 00000000001bce4f     0 NOTYPE  LOCAL  HIDDEN    13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.

>   Just to be awkward, if you are going to ignore STV_HIDDEN
>   symbols then you should probably also ignore STV_INTERNAL ones
>   as well...  Annobin does not generate them, but you never know,
>   one day some other tool might create some.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 8ad4296de98b..3d39332b3a06 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -87,6 +87,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym)
 	return GELF_ST_TYPE(sym->st_info);
 }
 
+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym)
+{
+	return GELF_ST_VISIBILITY(sym->st_other);
+}
+
 #ifndef STT_GNU_IFUNC
 #define STT_GNU_IFUNC 10
 #endif
@@ -111,7 +116,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym)
 	return elf_sym__type(sym) == STT_NOTYPE &&
 		sym->st_name != 0 &&
 		sym->st_shndx != SHN_UNDEF &&
-		sym->st_shndx != SHN_ABS;
+		sym->st_shndx != SHN_ABS &&
+		elf_sym__visibility(sym) != STV_HIDDEN &&
+		elf_sym__visibility(sym) != STV_INTERNAL;
 }
 
 static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
-- 
2.19.1

[PATCH 4.14 113/135] perf trace: Support multiple "vfs_getname" probes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

  [root@quaco ~]# perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
  [root@quaco ~]# perf trace -e open* sleep 1
       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
  [root@quaco ~]#

Works, further verified with:

  [root@quaco ~]# perf test vfs
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  [root@quaco ~]#

Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-trace.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 8e3c4ec00017..b224bf3f2b99 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2109,19 +2109,30 @@ static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
 
 static bool perf_evlist__add_vfs_getname(struct perf_evlist *evlist)
 {
-	struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname");
+	bool found = false;
+	struct perf_evsel *evsel, *tmp;
+	struct parse_events_error err = { .idx = 0, };
+	int ret = parse_events(evlist, "probe:vfs_getname*", &err);
 
-	if (IS_ERR(evsel))
+	if (ret)
 		return false;
 
-	if (perf_evsel__field(evsel, "pathname") == NULL) {
+	evlist__for_each_entry_safe(evlist, evsel, tmp) {
+		if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname"))
+			continue;
+
+		if (perf_evsel__field(evsel, "pathname")) {
+			evsel->handler = trace__vfs_getname;
+			found = true;
+			continue;
+		}
+
+		list_del_init(&evsel->node);
+		evsel->evlist = NULL;
 		perf_evsel__delete(evsel);
-		return false;
 	}
 
-	evsel->handler = trace__vfs_getname;
-	perf_evlist__add(evlist, evsel);
-	return true;
+	return found;
 }
 
 static struct perf_evsel *perf_evsel__new_pgfault(u64 config)
-- 
2.19.1

[PATCH 4.14 114/135] MIPS: Loongson: Introduce and use loongson_llsc_mb()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e02e07e3127d8aec1f4bcdfb2fc52a2d99b4859e ]

On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and
lld/scd is very weak ordering. We should add sync instructions "before
each ll/lld" and "at the branch-target between ll/sc" to workaround.
Otherwise, this flaw will cause deadlock occasionally (e.g. when doing
heavy load test with LTP).

Below is the explaination of CPU designer:

"For Loongson 3 family, when a memory access instruction (load, store,
or prefetch)'s executing occurs between the execution of LL and SC, the
success or failure of SC is not predictable. Although programmer would
not insert memory access instructions between LL and SC, the memory
instructions before LL in program-order, may dynamically executed
between the execution of LL/SC, so a memory fence (SYNC) is needed
before LL/LLD to avoid this situation.

Since Loongson-3A R2 (3A2000), we have improved our hardware design to
handle this case. But we later deduce a rarely circumstance that some
speculatively executed memory instructions due to branch misprediction
between LL/SC still fall into the above case, so a memory fence (SYNC)
at branch-target (if its target is not between LL/SC) is needed for
Loongson 3A1000, 3B1500, 3A2000 and 3A3000.

Our processor is continually evolving and we aim to to remove all these
workaround-SYNCs around LL/SC for new-come processor."

Here is an example:

Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var,
this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same
time('sc' return 1), and the variable is only *added by 1*, sometimes,
which is wrong and unacceptable(it should be added by 2).

Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.

This patch fix all the cases in kernel, but:

+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target
of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix
the ll and branch-target coincidently such as atomic_sub_if_positive/
cmpxchg/xchg, just like this one.

+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch
edac.h

+. local_ops and cmpxchg_local should not be affected by this bug since
only the owner can write.

+. mips_atomic_set for syscall.c is deprecated and rarely used, just let
it go

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
[paul.burton@mips.com:
  - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add
    a comment describing why it's there.
  - Make loongson_llsc_mb() a no-op when
    CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory
    barrier.
  - Add a comment describing the bug & how loongson_llsc_mb() helps
    in asm/barrier.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: ambrosehua@gmail.com
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Xu Chenghua <xuchenghua@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig               | 15 ++++++++++++++
 arch/mips/include/asm/atomic.h  |  6 ++++++
 arch/mips/include/asm/barrier.h | 36 +++++++++++++++++++++++++++++++++
 arch/mips/include/asm/bitops.h  |  5 +++++
 arch/mips/include/asm/futex.h   |  3 +++
 arch/mips/include/asm/pgtable.h |  2 ++
 arch/mips/loongson64/Platform   | 23 +++++++++++++++++++++
 arch/mips/mm/tlbex.c            | 10 +++++++++
 8 files changed, 100 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8d4470f44b74..77877c56ffc1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1407,6 +1407,21 @@ config LOONGSON3_ENHANCEMENT
 	  please say 'N' here. If you want a high-performance kernel to run on
 	  new Loongson 3 machines only, please say 'Y' here.
 
+config CPU_LOONGSON3_WORKAROUNDS
+	bool "Old Loongson 3 LLSC Workarounds"
+	default y if SMP
+	depends on CPU_LOONGSON3
+	help
+	  Loongson 3 processors have the llsc issues which require workarounds.
+	  Without workarounds the system may hang unexpectedly.
+
+	  Newer Loongson 3 will fix these issues and no workarounds are needed.
+	  The workarounds have no significant side effect on them but may
+	  decrease the performance of the system so this option should be
+	  disabled unless the kernel is intended to be run on old systems.
+
+	  If unsure, please say Y.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 0ab176bdb8e8..8ee17565bc78 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -47,6 +47,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%0, %1		# atomic_" #op "	\n"   \
@@ -86,6 +87,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_" #op "_return	\n"   \
@@ -134,6 +136,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_fetch_" #op "	\n"   \
@@ -389,6 +392,7 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%0, %1		# atomic64_" #op "	\n"   \
@@ -428,6 +432,7 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_" #op "_return\n"  \
@@ -477,6 +482,7 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v)  \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_fetch_" #op "\n"   \
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index a5eb1bb199a7..b7f6ac5e513c 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -222,6 +222,42 @@
 #define __smp_mb__before_atomic()	__smp_mb__before_llsc()
 #define __smp_mb__after_atomic()	smp_llsc_mb()
 
+/*
+ * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load,
+ * store or pref) in between an ll & sc can cause the sc instruction to
+ * erroneously succeed, breaking atomicity. Whilst it's unusual to write code
+ * containing such sequences, this bug bites harder than we might otherwise
+ * expect due to reordering & speculation:
+ *
+ * 1) A memory access appearing prior to the ll in program order may actually
+ *    be executed after the ll - this is the reordering case.
+ *
+ *    In order to avoid this we need to place a memory barrier (ie. a sync
+ *    instruction) prior to every ll instruction, in between it & any earlier
+ *    memory access instructions. Many of these cases are already covered by
+ *    smp_mb__before_llsc() but for the remaining cases, typically ones in
+ *    which multiple CPUs may operate on a memory location but ordering is not
+ *    usually guaranteed, we use loongson_llsc_mb() below.
+ *
+ *    This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later.
+ *
+ * 2) If a conditional branch exists between an ll & sc with a target outside
+ *    of the ll-sc loop, for example an exit upon value mismatch in cmpxchg()
+ *    or similar, then misprediction of the branch may allow speculative
+ *    execution of memory accesses from outside of the ll-sc loop.
+ *
+ *    In order to avoid this we need a memory barrier (ie. a sync instruction)
+ *    at each affected branch target, for which we also use loongson_llsc_mb()
+ *    defined below.
+ *
+ *    This case affects all current Loongson 3 CPUs.
+ */
+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */
+#define loongson_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#else
+#define loongson_llsc_mb()	do { } while (0)
+#endif
+
 #include <asm-generic/barrier.h>
 
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index fa57cef12a46..38a162d11b7b 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -68,6 +68,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# set_bit	\n"
@@ -78,6 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -120,6 +122,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (~(1UL << bit)));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# clear_bit	\n"
@@ -130,6 +133,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -188,6 +192,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index a9e61ea54ca9..0a62a91b592d 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -50,6 +50,7 @@
 		  "i" (-EFAULT)						\
 		: "memory");						\
 	} else if (cpu_has_llsc) {					\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -162,6 +163,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		  "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
+		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
@@ -190,6 +192,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
 		  "i" (-EFAULT)
 		: "memory");
+		loongson_llsc_mb();
 	} else
 		return -ENOSYS;
 
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 9e9e94415d08..aab7b382a062 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -229,6 +229,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
 		} else if (kernel_uses_llsc) {
+			loongson_llsc_mb();
 			__asm__ __volatile__ (
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
 			"	.set	push				\n"
@@ -244,6 +245,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			"	.set	mips0				\n"
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
+			loongson_llsc_mb();
 		}
 #else /* !CONFIG_SMP */
 		if (pte_none(*buddy))
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 0fce4608aa88..c1a4d4dc4665 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -23,6 +23,29 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
 endif
 
 cflags-$(CONFIG_CPU_LOONGSON3)	+= -Wa,--trap
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON3)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
 #
 # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
 # as MIPS64 R2; older versions as just R1.  This leaves the possibility open
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 79b9f2ad3ff5..7da67a278129 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -935,6 +935,8 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 * to mimic that here by taking a load/istream page
 		 * fault.
 		 */
+		if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+			uasm_i_sync(p, 0);
 		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
 		uasm_i_jr(p, ptr);
 
@@ -1660,6 +1662,8 @@ static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(p, 0);
 # ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_lld(p, pte, 0, ptr);
@@ -2277,6 +2281,8 @@ static void build_r4000_tlb_load_handler(void)
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_0 & 1) {
@@ -2332,6 +2338,8 @@ static void build_r4000_tlb_store_handler(void)
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
@@ -2388,6 +2396,8 @@ static void build_r4000_tlb_modify_handler(void)
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
-- 
2.19.1

[PATCH 4.14 115/135] MIPS: Remove function size check in get_frame_info()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/process.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e8b166e9146a..ea563bfea0e1 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -370,7 +370,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip, int *frame_size)
 static int get_frame_info(struct mips_frame_info *info)
 {
 	bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
-	union mips_instruction insn, *ip, *ip_end;
+	union mips_instruction insn, *ip;
 	const unsigned int max_insns = 128;
 	unsigned int last_insn_size = 0;
 	unsigned int i;
@@ -383,10 +383,9 @@ static int get_frame_info(struct mips_frame_info *info)
 	if (!ip)
 		goto err;
 
-	ip_end = (void *)ip + info->func_size;
-
-	for (i = 0; i < max_insns && ip < ip_end; i++) {
+	for (i = 0; i < max_insns; i++) {
 		ip = (void *)ip + last_insn_size;
+
 		if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
 			insn.word = ip->halfword[0] << 16;
 			last_insn_size = 2;
-- 
2.19.1

[PATCH 4.14 116/135] i2c: omap: Use noirq system sleep pm ops to idle device for suspend

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c6e2bd956936d925748581e4d0294f10f1d92f2c ]

We currently get the following error with pixcir_ts driver during a
suspend resume cycle:

omap_i2c 4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110

And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.

This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.

Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.

Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-omap.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 23c2ea2baedc..12ba183693d6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1477,8 +1477,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1504,7 +1503,7 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1519,20 +1518,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops omap_i2c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
2.19.1

[PATCH 4.14 117/135] fs: ratelimit __find_get_block_slow() failure message.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index b96f3b98a6ef..8086cc8ff0bc 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -208,6 +208,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	struct buffer_head *head;
 	struct page *page;
 	int all_mapped = 1;
+	static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);
 
 	index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
 	page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED);
@@ -235,15 +236,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	 * file io on the block device and getblk.  It gets dealt with
 	 * elsewhere, don't buffer_error if we had some unmapped buffers
 	 */
-	if (all_mapped) {
-		printk("__find_get_block_slow() failed. "
-			"block=%llu, b_blocknr=%llu\n",
-			(unsigned long long)block,
-			(unsigned long long)bh->b_blocknr);
-		printk("b_state=0x%08lx, b_size=%zu\n",
-			bh->b_state, bh->b_size);
-		printk("device %pg blocksize: %d\n", bdev,
-			1 << bd_inode->i_blkbits);
+	ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
+	if (all_mapped && __ratelimit(&last_warned)) {
+		printk("__find_get_block_slow() failed. block=%llu, "
+		       "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
+		       "device %pg blocksize: %d\n",
+		       (unsigned long long)block,
+		       (unsigned long long)bh->b_blocknr,
+		       bh->b_state, bh->b_size, bdev,
+		       1 << bd_inode->i_blkbits);
 	}
 out_unlock:
 	spin_unlock(&bd_mapping->private_lock);
-- 
2.19.1

[PATCH 4.14 118/135] qed: Fix EQ full firmware assert.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 660492bcf4a7561b5fdc13be0ae0b0c0a8c120be ]

When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sp.h  |  1 +
 drivers/net/ethernet/qlogic/qed/qed_spq.c | 15 +++++++--------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index 01a213d4ee9c..e7192f3babc2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -380,6 +380,7 @@ void qed_consq_setup(struct qed_hwfn *p_hwfn);
  * @param p_hwfn
  */
 void qed_consq_free(struct qed_hwfn *p_hwfn);
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn);
 
 /**
  * @file
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index 467755b6dd0b..01f8e2b5cb6c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -404,6 +404,11 @@ int qed_eq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 
 	qed_eq_prod_update(p_hwfn, qed_chain_get_prod_idx(p_chain));
 
+	/* Attempt to post pending requests */
+	spin_lock_bh(&p_hwfn->p_spq->lock);
+	rc = qed_spq_pend_post(p_hwfn);
+	spin_unlock_bh(&p_hwfn->p_spq->lock);
+
 	return rc;
 }
 
@@ -747,7 +752,7 @@ static int qed_spq_post_list(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
-static int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
 {
 	struct qed_spq *p_spq = p_hwfn->p_spq;
 	struct qed_spq_entry *p_ent = NULL;
@@ -879,7 +884,6 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 	struct qed_spq_entry	*p_ent = NULL;
 	struct qed_spq_entry	*tmp;
 	struct qed_spq_entry	*found = NULL;
-	int			rc;
 
 	if (!p_hwfn)
 		return -EINVAL;
@@ -937,12 +941,7 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 		 */
 		qed_spq_return_entry(p_hwfn, found);
 
-	/* Attempt to post pending requests */
-	spin_lock_bh(&p_spq->lock);
-	rc = qed_spq_pend_post(p_hwfn);
-	spin_unlock_bh(&p_spq->lock);
-
-	return rc;
+	return 0;
 }
 
 int qed_consq_alloc(struct qed_hwfn *p_hwfn)
-- 
2.19.1

[PATCH 4.14 119/135] qed: Consider TX tcs while deriving the max num_queues for PF.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 4ffdde755db7..62cde3854a5c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -2170,7 +2170,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 			u16 num_queues = 0;
 
 			/* Since the feature controls only queue-zones,
-			 * make sure we have the contexts [rx, tx, xdp] to
+			 * make sure we have the contexts [rx, xdp, tcs] to
 			 * match.
 			 */
 			for_each_hwfn(cdev, i) {
@@ -2180,7 +2180,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 				u16 cids;
 
 				cids = hwfn->pf_params.eth_pf_params.num_cons;
-				num_queues += min_t(u16, l2_queues, cids / 3);
+				cids /= (2 + info->num_tc);
+				num_queues += min_t(u16, l2_queues, cids);
 			}
 
 			/* queues might theoretically be >256, but interrupts'
-- 
2.19.1

[PATCH 4.14 120/135] Input: wacom_serial4 - add support for Wacom ArtPad II tablet

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Gerecke <jason.gerecke@wacom.com>

commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.

Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:

    $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0

https://github.com/linuxwacom/xf86-input-wacom/issues/40

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/tablet/wacom_serial4.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/tablet/wacom_serial4.c
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -187,6 +187,7 @@ enum {
 	MODEL_DIGITIZER_II	= 0x5544, /* UD */
 	MODEL_GRAPHIRE		= 0x4554, /* ET */
 	MODEL_PENPARTNER	= 0x4354, /* CT */
+	MODEL_ARTPAD_II		= 0x4B54, /* KT */
 };
 
 static void wacom_handle_model_response(struct wacom *wacom)
@@ -245,6 +246,7 @@ static void wacom_handle_model_response(
 		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
 		break;
 
+	case MODEL_ARTPAD_II:
 	case MODEL_DIGITIZER_II:
 		wacom->dev->name = "Wacom Digitizer II";
 		wacom->dev->id.version = MODEL_DIGITIZER_II;

[PATCH 4.14 121/135] Input: elan_i2c - add id for touchpad found in Lenovo s21e-20

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vincent Batts <vbatts@hashbangbash.com>

commit e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream.

Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.

Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/elan_i2c_core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1252,6 +1252,7 @@ static const struct acpi_device_id elan_
 	{ "ELAN0000", 0 },
 	{ "ELAN0100", 0 },
 	{ "ELAN0600", 0 },
+	{ "ELAN0601", 0 },
 	{ "ELAN0602", 0 },
 	{ "ELAN0605", 0 },
 	{ "ELAN0608", 0 },

[PATCH 4.14 122/135] iscsi_ibft: Fix missing break in switch statement

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/iscsi_ibft.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -542,6 +542,7 @@ static umode_t __init ibft_check_tgt_for
 	case ISCSI_BOOT_TGT_NIC_ASSOC:
 	case ISCSI_BOOT_TGT_CHAP_TYPE:
 		rc = S_IRUGO;
+		break;
 	case ISCSI_BOOT_TGT_NAME:
 		if (tgt->tgt_name_len)
 			rc = S_IRUGO;

[PATCH 4.14 123/135] scsi: aacraid: Fix missing break in switch statement

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 5e420fe635813e5746b296cfc8fff4853ae205a2 upstream.

Add missing break statement and fix identation issue.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: 9cb62fa24e0d ("aacraid: Log firmware AIF messages")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/aacraid/commsup.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1332,8 +1332,9 @@ static void aac_handle_aif(struct aac_de
 				  ADD : DELETE;
 				break;
 			}
-			case AifBuManagerEvent:
-				aac_handle_aif_bu(dev, aifcmd);
+			break;
+		case AifBuManagerEvent:
+			aac_handle_aif_bu(dev, aifcmd);
 			break;
 		}
 

[PATCH 4.14 124/135] arm64: dts: hikey: Give wifi some time after power-on

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kiszka <jan.kiszka@siemens.com>

commit 83b944174ad79825ae84a47af1a0354485b24602 upstream.

Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Cc: <stable@vger.kernel.org> #4.12+
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -118,6 +118,7 @@
 		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 		clocks = <&pmic>;
 		clock-names = "ext_clock";
+		post-power-on-delay-ms = <10>;
 		power-off-delay-us = <10>;
 	};
 

[PATCH 4.14 125/135] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").

It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.

Cc: <stable@vger.kernel.org>
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -60,7 +60,7 @@
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &ehci {

[PATCH 4.14 126/135] ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.

Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:

exynos_clkout_init: failed to register clkout clock

Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos3250.dtsi |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -172,6 +172,9 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+			clock-names = "clkout8";
+			clocks = <&cmu CLK_FIN_PLL>;
+			#clock-cells = <1>;
 		};
 
 		mipi_phy: video-phy {

[PATCH 4.14 127/135] drm: disable uncached DMA optimization for ARM and arm64

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ]

The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.

The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Zhou <David1.Zhou@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Michel Daenzer <michel.daenzer@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: amd-gfx list <amd-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10778815/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_cache.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h
index beab0f0d0cfb..250e2d13c61b 100644
--- a/include/drm/drm_cache.h
+++ b/include/drm/drm_cache.h
@@ -45,6 +45,24 @@ static inline bool drm_arch_can_wc_memory(void)
 	return false;
 #elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3)
 	return false;
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+	/*
+	 * The DRM driver stack is designed to work with cache coherent devices
+	 * only, but permits an optimization to be enabled in some cases, where
+	 * for some buffers, both the CPU and the GPU use uncached mappings,
+	 * removing the need for DMA snooping and allocation in the CPU caches.
+	 *
+	 * The use of uncached GPU mappings relies on the correct implementation
+	 * of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
+	 * will use cached mappings nonetheless. On x86 platforms, this does not
+	 * seem to matter, as uncached CPU mappings will snoop the caches in any
+	 * case. However, on ARM and arm64, enabling this optimization on a
+	 * platform where NoSnoop is ignored results in loss of coherency, which
+	 * breaks correct operation of the device. Since we have no way of
+	 * detecting whether NoSnoop works or not, just disable this
+	 * optimization entirely for ARM and arm64.
+	 */
+	return false;
 #else
 	return true;
 #endif
-- 
2.19.1

[PATCH 4.14 127/135] drm: disable uncached DMA optimization for ARM and arm64

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ]

The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.

The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Zhou <David1.Zhou@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Michel Daenzer <michel.daenzer@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: amd-gfx list <amd-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10778815/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_cache.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h
index beab0f0d0cfb..250e2d13c61b 100644
--- a/include/drm/drm_cache.h
+++ b/include/drm/drm_cache.h
@@ -45,6 +45,24 @@ static inline bool drm_arch_can_wc_memory(void)
 	return false;
 #elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3)
 	return false;
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+	/*
+	 * The DRM driver stack is designed to work with cache coherent devices
+	 * only, but permits an optimization to be enabled in some cases, where
+	 * for some buffers, both the CPU and the GPU use uncached mappings,
+	 * removing the need for DMA snooping and allocation in the CPU caches.
+	 *
+	 * The use of uncached GPU mappings relies on the correct implementation
+	 * of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
+	 * will use cached mappings nonetheless. On x86 platforms, this does not
+	 * seem to matter, as uncached CPU mappings will snoop the caches in any
+	 * case. However, on ARM and arm64, enabling this optimization on a
+	 * platform where NoSnoop is ignored results in loss of coherency, which
+	 * breaks correct operation of the device. Since we have no way of
+	 * detecting whether NoSnoop works or not, just disable this
+	 * optimization entirely for ARM and arm64.
+	 */
+	return false;
 #else
 	return true;
 #endif
-- 
2.19.1



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 4.14 128/135] ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit afc9f65e01cd114cb2cedf544d22239116ce0cc6 ]

When building the kernel as Thumb-2 with binutils 2.29 or newer, if the
assembler has seen the .type directive (via ENDPROC()) for a symbol, it
automatically handles the setting of the lowest bit when the symbol is
used with ADR.  The badr macro on the other hand handles this lowest bit
manually.  This leads to a jump to a wrong address in the wrong state
in the syscall return path:

 Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2
 Modules linked in:
 CPU: 0 PID: 652 Comm: modprobe Tainted: G      D           4.18.0-rc3+ #8
 PC is at ret_fast_syscall+0x4/0x62
 LR is at sys_brk+0x109/0x128
 pc : [<80101004>]    lr : [<801c8a35>]    psr: 60000013
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 50c5387d  Table: 9e82006a  DAC: 00000051
 Process modprobe (pid: 652, stack limit = 0x(ptrval))

 80101000 <ret_fast_syscall>:
 80101000:       b672            cpsid   i
 80101002:       f8d9 2008       ldr.w   r2, [r9, #8]
 80101006:       f1b2 4ffe       cmp.w   r2, #2130706432 ; 0x7f000000

 80101184 <local_restart>:
 80101184:       f8d9 a000       ldr.w   sl, [r9]
 80101188:       e92d 0030       stmdb   sp!, {r4, r5}
 8010118c:       f01a 0ff0       tst.w   sl, #240        ; 0xf0
 80101190:       d117            bne.n   801011c2 <__sys_trace>
 80101192:       46ba            mov     sl, r7
 80101194:       f5ba 7fc8       cmp.w   sl, #400        ; 0x190
 80101198:       bf28            it      cs
 8010119a:       f04f 0a00       movcs.w sl, #0
 8010119e:       f3af 8014       nop.w   {20}
 801011a2:       f2af 1ea2       subw    lr, pc, #418    ; 0x1a2

To fix this, add a new symbol name which doesn't have ENDPROC used on it
and use that with badr.  We can't remove the badr usage since that would
would cause breakage with older binutils.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/entry-common.S |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -46,6 +46,7 @@ saved_pc	.req	lr
  * features make this path too inefficient.
  */
 ret_fast_syscall:
+__ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
@@ -75,6 +76,7 @@ fast_work_pending:
  * r0 first to avoid needing to save registers around each C function call.
  */
 ret_fast_syscall:
+__ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
 	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
@@ -241,7 +243,7 @@ local_restart:
 	tst	r10, #_TIF_SYSCALL_WORK		@ are we tracing syscalls?
 	bne	__sys_trace
 
-	invoke_syscall tbl, scno, r10, ret_fast_syscall
+	invoke_syscall tbl, scno, r10, __ret_fast_syscall
 
 	add	r1, sp, #S_OFF
 2:	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)

[PATCH 4.14 129/135] gfs2: Fix missed wakeups in find_insert_glock

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 605b0487f0bc1ae9963bf52ece0f5c8055186f81 upstream.

Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock.  It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name.  As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.

Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.

Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/glock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -107,7 +107,7 @@ static int glock_wake_function(wait_queu
 
 static wait_queue_head_t *glock_waitqueue(struct lm_lockname *name)
 {
-	u32 hash = jhash2((u32 *)name, sizeof(*name) / 4, 0);
+	u32 hash = jhash2((u32 *)name, ht_parms.key_len / 4, 0);
 
 	return glock_wait_table + hash_32(hash, GLOCK_WAIT_TABLE_BITS);
 }

[PATCH 4.14 130/135] ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel F. Dickinson <cshored@thecshore.com>

commit ce938231bd3b1d7af3cbd8836f084801090470e1 upstream.

ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>)

"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]

The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) has some kind of default - not
unique mac address - set and requires to set the correct MAC address via
mac-address devicetree property, however:

"some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom"
should not be set (your use-case). in this case AH_USE_EEPROM should be
set (which is the default when there is no OF node)"[1]

The other use case is:

the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]

After this patch to ath9k_of_init() the new behavior will be:

    if there's no OF node then everything is the same as before
    if there's an empty OF node then ath9k will use the hardware EEPROM
      (before ath9k would fail to initialize because no EEPROM data was
      provided by userspace)
    if there's an OF node with only a MAC address then ath9k will use
      the MAC address and the hardware EEPROM (see the case above)
    with "qca,no-eeprom" EEPROM data from userspace will be requested.
      the behavior here will not change
[1]

Martin provides additional background on EEPROM swapping[1].

Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.

[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/10241731/

Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/init.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -580,15 +580,15 @@ static int ath9k_of_init(struct ath_soft
 		ret = ath9k_eeprom_request(sc, eeprom_name);
 		if (ret)
 			return ret;
+
+		ah->ah_flags &= ~AH_USE_EEPROM;
+		ah->ah_flags |= AH_NO_EEP_SWAP;
 	}
 
 	mac = of_get_mac_address(np);
 	if (mac)
 		ether_addr_copy(common->macaddr, mac);
 
-	ah->ah_flags &= ~AH_USE_EEPROM;
-	ah->ah_flags |= AH_NO_EEP_SWAP;
-
 	return 0;
 }
 

[PATCH 4.14 131/135] driver core: Postpone DMA tear-down until after devres release

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 376991db4b6464e906d699ef07681e2ffa8ab08c upstream.

When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:

    echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind

the kernel crashes with:

    Unable to handle kernel paging request at virtual address ffffffbf029ffffc
    Mem abort info:
      ESR = 0x96000006
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000006
      CM = 0, WnR = 0
    swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c
    [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000
    Internal error: Oops: 96000006 [#1] SMP
    Modules linked in:
    CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
    Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
    pstate: 60400005 (nZCv daif +PAN -UAO)
    pc : __free_pages+0x8/0x58
    lr : __dma_direct_free_pages+0x50/0x5c
    sp : ffffff801268baa0
    x29: ffffff801268baa0 x28: 0000000000000000
    x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0
    x25: ffffffc6f9c60810 x24: 0000000000000000
    x23: 00000000fffff000 x22: ffffff8012145000
    x21: 0000000000000800 x20: ffffffbf029fffc8
    x19: 0000000000000000 x18: ffffffc6f86c42c8
    x17: 0000000000000000 x16: 0000000000000070
    x15: 0000000000000003 x14: 0000000000000000
    x13: ffffff801103d7f8 x12: 0000000000000028
    x11: ffffff8011117604 x10: 0000000000009ad8
    x9 : ffffff80110126d0 x8 : ffffffc6f7563000
    x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018
    x5 : ffffff8011cf3cc8 x4 : 0000000000004000
    x3 : 0000000000080000 x2 : 0000000000000001
    x1 : 0000000000000000 x0 : ffffffbf029fffc8
    Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
    Call trace:
     __free_pages+0x8/0x58
     __dma_direct_free_pages+0x50/0x5c
     arch_dma_free+0x1c/0x98
     dma_direct_free+0x14/0x24
     dma_free_attrs+0x9c/0xdc
     dmam_release+0x18/0x20
     release_nodes+0x25c/0x28c
     devres_release_all+0x48/0x4c
     device_release_driver_internal+0x184/0x1f0
     device_release_driver+0x14/0x1c
     unbind_store+0x70/0xb8
     drv_attr_store+0x24/0x34
     sysfs_kf_write+0x4c/0x64
     kernfs_fop_write+0x154/0x1c4
     __vfs_write+0x34/0x164
     vfs_write+0xb4/0x16c
     ksys_write+0x5c/0xbc
     __arm64_sys_write+0x14/0x1c
     el0_svc_common+0x98/0x114
     el0_svc_handler+0x1c/0x24
     el0_svc+0x8/0xc
    Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404)
    ---[ end trace 8c564cdd3a1a840f ]---

While I've bisected this to commit e8e683ae9a736407 ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.

On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).

Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[rm: backport for 4.12-4.19 - kernels before 5.0 will not see
 the crash above, but may get silent memory corruption instead]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/dd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -850,9 +850,9 @@ static void __device_release_driver(stru
 			drv->remove(dev);
 
 		device_links_driver_cleanup(dev);
-		dma_deconfigure(dev);
 
 		devres_release_all(dev);
+		dma_deconfigure(dev);
 		dev->driver = NULL;
 		dev_set_drvdata(dev, NULL);
 		if (dev->pm_domain && dev->pm_domain->dismiss)

[PATCH 4.14 132/135] perf/x86/intel: Make cpuc allocations consistent

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit d01b1f96a82e5dd7841a1d39db3abfdaf95f70ab upstream

The cpuc data structure allocation is different between fake and real
cpuc's; use the same code to init/free both.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/core.c       |   13 +++++--------
 arch/x86/events/intel/core.c |   29 ++++++++++++++++++-----------
 arch/x86/events/perf_event.h |   11 ++++++++---
 3 files changed, 31 insertions(+), 22 deletions(-)

--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1968,7 +1968,7 @@ static int x86_pmu_commit_txn(struct pmu
  */
 static void free_fake_cpuc(struct cpu_hw_events *cpuc)
 {
-	kfree(cpuc->shared_regs);
+	intel_cpuc_finish(cpuc);
 	kfree(cpuc);
 }
 
@@ -1980,14 +1980,11 @@ static struct cpu_hw_events *allocate_fa
 	cpuc = kzalloc(sizeof(*cpuc), GFP_KERNEL);
 	if (!cpuc)
 		return ERR_PTR(-ENOMEM);
-
-	/* only needed, if we have extra_regs */
-	if (x86_pmu.extra_regs) {
-		cpuc->shared_regs = allocate_shared_regs(cpu);
-		if (!cpuc->shared_regs)
-			goto error;
-	}
 	cpuc->is_fake = 1;
+
+	if (intel_cpuc_prepare(cpuc, cpu))
+		goto error;
+
 	return cpuc;
 error:
 	free_fake_cpuc(cpuc);
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3262,7 +3262,7 @@ ssize_t intel_event_sysfs_show(char *pag
 	return x86_event_sysfs_show(page, config, event);
 }
 
-struct intel_shared_regs *allocate_shared_regs(int cpu)
+static struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
 	int i;
@@ -3294,10 +3294,9 @@ static struct intel_excl_cntrs *allocate
 	return c;
 }
 
-static int intel_pmu_cpu_prepare(int cpu)
-{
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 
+int intel_cpuc_prepare(struct cpu_hw_events *cpuc, int cpu)
+{
 	if (x86_pmu.extra_regs || x86_pmu.lbr_sel_map) {
 		cpuc->shared_regs = allocate_shared_regs(cpu);
 		if (!cpuc->shared_regs)
@@ -3307,7 +3306,7 @@ static int intel_pmu_cpu_prepare(int cpu
 	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
 		size_t sz = X86_PMC_IDX_MAX * sizeof(struct event_constraint);
 
-		cpuc->constraint_list = kzalloc(sz, GFP_KERNEL);
+		cpuc->constraint_list = kzalloc_node(sz, GFP_KERNEL, cpu_to_node(cpu));
 		if (!cpuc->constraint_list)
 			goto err_shared_regs;
 
@@ -3332,6 +3331,11 @@ err:
 	return -ENOMEM;
 }
 
+static int intel_pmu_cpu_prepare(int cpu)
+{
+	return intel_cpuc_prepare(&per_cpu(cpu_hw_events, cpu), cpu);
+}
+
 static void flip_smm_bit(void *data)
 {
 	unsigned long set = *(unsigned long *)data;
@@ -3403,9 +3407,8 @@ static void intel_pmu_cpu_starting(int c
 	}
 }
 
-static void free_excl_cntrs(int cpu)
+static void free_excl_cntrs(struct cpu_hw_events *cpuc)
 {
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 	struct intel_excl_cntrs *c;
 
 	c = cpuc->excl_cntrs;
@@ -3423,9 +3426,8 @@ static void intel_pmu_cpu_dying(int cpu)
 	fini_debug_store_on_cpu(cpu);
 }
 
-static void intel_pmu_cpu_dead(int cpu)
+void intel_cpuc_finish(struct cpu_hw_events *cpuc)
 {
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 	struct intel_shared_regs *pc;
 
 	pc = cpuc->shared_regs;
@@ -3435,7 +3437,12 @@ static void intel_pmu_cpu_dead(int cpu)
 		cpuc->shared_regs = NULL;
 	}
 
-	free_excl_cntrs(cpu);
+	free_excl_cntrs(cpuc);
+}
+
+static void intel_pmu_cpu_dead(int cpu)
+{
+	intel_cpuc_finish(&per_cpu(cpu_hw_events, cpu));
 }
 
 static void intel_pmu_sched_task(struct perf_event_context *ctx,
@@ -4494,7 +4501,7 @@ static __init int fixup_ht_bug(void)
 	hardlockup_detector_perf_restart();
 
 	for_each_online_cpu(c)
-		free_excl_cntrs(c);
+		free_excl_cntrs(&per_cpu(cpu_hw_events, c));
 
 	cpus_read_unlock();
 	pr_info("PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off\n");
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -880,7 +880,8 @@ struct event_constraint *
 x86_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 			  struct perf_event *event);
 
-struct intel_shared_regs *allocate_shared_regs(int cpu);
+extern int intel_cpuc_prepare(struct cpu_hw_events *cpuc, int cpu);
+extern void intel_cpuc_finish(struct cpu_hw_events *cpuc);
 
 int intel_pmu_init(void);
 
@@ -1014,9 +1015,13 @@ static inline int intel_pmu_init(void)
 	return 0;
 }
 
-static inline struct intel_shared_regs *allocate_shared_regs(int cpu)
+static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu)
+{
+	return 0;
+}
+
+static inline void intel_cpuc_finish(struct cpu_hw_event *cpuc)
 {
-	return NULL;
 }
 
 static inline int is_ht_workaround_enabled(void)

[PATCH 4.14 133/135] perf/x86/intel: Generalize dynamic constraint creation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 11f8b2d65ca9029591c8df26bb6bd063c312b7fe upstream

Such that we can re-use it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |   51 +++++++++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 21 deletions(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2640,6 +2640,35 @@ intel_stop_scheduling(struct cpu_hw_even
 }
 
 static struct event_constraint *
+dyn_constraint(struct cpu_hw_events *cpuc, struct event_constraint *c, int idx)
+{
+	WARN_ON_ONCE(!cpuc->constraint_list);
+
+	if (!(c->flags & PERF_X86_EVENT_DYNAMIC)) {
+		struct event_constraint *cx;
+
+		/*
+		 * grab pre-allocated constraint entry
+		 */
+		cx = &cpuc->constraint_list[idx];
+
+		/*
+		 * initialize dynamic constraint
+		 * with static constraint
+		 */
+		*cx = *c;
+
+		/*
+		 * mark constraint as dynamic
+		 */
+		cx->flags |= PERF_X86_EVENT_DYNAMIC;
+		c = cx;
+	}
+
+	return c;
+}
+
+static struct event_constraint *
 intel_get_excl_constraints(struct cpu_hw_events *cpuc, struct perf_event *event,
 			   int idx, struct event_constraint *c)
 {
@@ -2669,27 +2698,7 @@ intel_get_excl_constraints(struct cpu_hw
 	 * only needed when constraint has not yet
 	 * been cloned (marked dynamic)
 	 */
-	if (!(c->flags & PERF_X86_EVENT_DYNAMIC)) {
-		struct event_constraint *cx;
-
-		/*
-		 * grab pre-allocated constraint entry
-		 */
-		cx = &cpuc->constraint_list[idx];
-
-		/*
-		 * initialize dynamic constraint
-		 * with static constraint
-		 */
-		*cx = *c;
-
-		/*
-		 * mark constraint as dynamic, so we
-		 * can free it later on
-		 */
-		cx->flags |= PERF_X86_EVENT_DYNAMIC;
-		c = cx;
-	}
+	c = dyn_constraint(cpuc, c, idx);
 
 	/*
 	 * From here on, the constraint is dynamic.

[PATCH 4.14 134/135] x86: Add TSX Force Abort CPUID/MSR

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 52f64909409c17adf54fcf5f9751e0544ca3a6b4 upstream

Skylake systems will receive a microcode update to address a TSX
errata. This microcode will (by default) clobber PMC3 when TSX
instructions are (speculatively or not) executed.

It also provides an MSR to cause all TSX transaction to abort and
preserve PMC3.

Add the CPUID enumeration and MSR definition.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpufeatures.h |    1 +
 arch/x86/include/asm/msr-index.h   |    6 ++++++
 2 files changed, 7 insertions(+)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -339,6 +339,7 @@
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */
 #define X86_FEATURE_AVX512_4VNNIW	(18*32+ 2) /* AVX-512 Neural Network Instructions */
 #define X86_FEATURE_AVX512_4FMAPS	(18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_TSX_FORCE_ABORT	(18*32+13) /* "" TSX_FORCE_ABORT */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -610,6 +610,12 @@
 
 #define MSR_IA32_TSC_DEADLINE		0x000006E0
 
+
+#define MSR_TSX_FORCE_ABORT		0x0000010F
+
+#define MSR_TFA_RTM_FORCE_ABORT_BIT	0
+#define MSR_TFA_RTM_FORCE_ABORT		BIT_ULL(MSR_TFA_RTM_FORCE_ABORT_BIT)
+
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181

[PATCH 4.14 135/135] perf/x86/intel: Implement support for TSX Force Abort

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 400816f60c543153656ac74eaf7f36f6b7202378 upstream

Skylake (and later) will receive a microcode update to address a TSX
errata. This microcode will, on execution of a TSX instruction
(speculative or not) use (clobber) PMC3. This update will also provide
a new MSR to change this behaviour along with a CPUID bit to enumerate
the presence of this new MSR.

When the MSR gets set; the microcode will no longer use PMC3 but will
Force Abort every TSX transaction (upon executing COMMIT).

When TSX Force Abort (TFA) is allowed (default); the MSR gets set when
PMC3 gets scheduled and cleared when, after scheduling, PMC3 is
unused.

When TFA is not allowed; clear PMC3 from all constraints such that it
will not get used.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |   74 +++++++++++++++++++++++++++++++++++++++++--
 arch/x86/events/perf_event.h |    6 +++
 2 files changed, 77 insertions(+), 3 deletions(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -1995,6 +1995,39 @@ static void intel_pmu_nhm_enable_all(int
 	intel_pmu_enable_all(added);
 }
 
+static void intel_set_tfa(struct cpu_hw_events *cpuc, bool on)
+{
+	u64 val = on ? MSR_TFA_RTM_FORCE_ABORT : 0;
+
+	if (cpuc->tfa_shadow != val) {
+		cpuc->tfa_shadow = val;
+		wrmsrl(MSR_TSX_FORCE_ABORT, val);
+	}
+}
+
+static void intel_tfa_commit_scheduling(struct cpu_hw_events *cpuc, int idx, int cntr)
+{
+	/*
+	 * We're going to use PMC3, make sure TFA is set before we touch it.
+	 */
+	if (cntr == 3 && !cpuc->is_fake)
+		intel_set_tfa(cpuc, true);
+}
+
+static void intel_tfa_pmu_enable_all(int added)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	/*
+	 * If we find PMC3 is no longer used when we enable the PMU, we can
+	 * clear TFA.
+	 */
+	if (!test_bit(3, cpuc->active_mask))
+		intel_set_tfa(cpuc, false);
+
+	intel_pmu_enable_all(added);
+}
+
 static inline u64 intel_pmu_get_status(void)
 {
 	u64 status;
@@ -3218,6 +3251,26 @@ glp_get_event_constraints(struct cpu_hw_
 	return c;
 }
 
+static bool allow_tsx_force_abort = true;
+
+static struct event_constraint *
+tfa_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
+			  struct perf_event *event)
+{
+	struct event_constraint *c = hsw_get_event_constraints(cpuc, idx, event);
+
+	/*
+	 * Without TFA we must not use PMC3.
+	 */
+	if (!allow_tsx_force_abort && test_bit(3, c->idxmsk)) {
+		c = dyn_constraint(cpuc, c, idx);
+		c->idxmsk64 &= ~(1ULL << 3);
+		c->weight--;
+	}
+
+	return c;
+}
+
 /*
  * Broadwell:
  *
@@ -3312,13 +3365,15 @@ int intel_cpuc_prepare(struct cpu_hw_eve
 			goto err;
 	}
 
-	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
+	if (x86_pmu.flags & (PMU_FL_EXCL_CNTRS | PMU_FL_TFA)) {
 		size_t sz = X86_PMC_IDX_MAX * sizeof(struct event_constraint);
 
 		cpuc->constraint_list = kzalloc_node(sz, GFP_KERNEL, cpu_to_node(cpu));
 		if (!cpuc->constraint_list)
 			goto err_shared_regs;
+	}
 
+	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
 		cpuc->excl_cntrs = allocate_excl_cntrs(cpu);
 		if (!cpuc->excl_cntrs)
 			goto err_constraint_list;
@@ -3425,9 +3480,10 @@ static void free_excl_cntrs(struct cpu_h
 		if (c->core_id == -1 || --c->refcnt == 0)
 			kfree(c);
 		cpuc->excl_cntrs = NULL;
-		kfree(cpuc->constraint_list);
-		cpuc->constraint_list = NULL;
 	}
+
+	kfree(cpuc->constraint_list);
+	cpuc->constraint_list = NULL;
 }
 
 static void intel_pmu_cpu_dying(int cpu)
@@ -3912,8 +3968,11 @@ static struct attribute *intel_pmu_caps_
        NULL
 };
 
+DEVICE_BOOL_ATTR(allow_tsx_force_abort, 0644, allow_tsx_force_abort);
+
 static struct attribute *intel_pmu_attrs[] = {
 	&dev_attr_freeze_on_smi.attr,
+	NULL, /* &dev_attr_allow_tsx_force_abort.attr.attr */
 	NULL,
 };
 
@@ -4369,6 +4428,15 @@ __init int intel_pmu_init(void)
 		x86_pmu.cpu_events = get_hsw_events_attrs();
 		intel_pmu_pebs_data_source_skl(
 			boot_cpu_data.x86_model == INTEL_FAM6_SKYLAKE_X);
+
+		if (boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) {
+			x86_pmu.flags |= PMU_FL_TFA;
+			x86_pmu.get_event_constraints = tfa_get_event_constraints;
+			x86_pmu.enable_all = intel_tfa_pmu_enable_all;
+			x86_pmu.commit_scheduling = intel_tfa_commit_scheduling;
+			intel_pmu_attrs[1] = &dev_attr_allow_tsx_force_abort.attr.attr;
+		}
+
 		pr_cont("Skylake events, ");
 		name = "skylake";
 		break;
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -239,6 +239,11 @@ struct cpu_hw_events {
 	int excl_thread_id; /* 0 or 1 */
 
 	/*
+	 * SKL TSX_FORCE_ABORT shadow
+	 */
+	u64				tfa_shadow;
+
+	/*
 	 * AMD specific bits
 	 */
 	struct amd_nb			*amd_nb;
@@ -672,6 +677,7 @@ do {									\
 #define PMU_FL_HAS_RSP_1	0x2 /* has 2 equivalent offcore_rsp regs   */
 #define PMU_FL_EXCL_CNTRS	0x4 /* has exclusive counter requirements  */
 #define PMU_FL_EXCL_ENABLED	0x8 /* exclusive counter active */
+#define PMU_FL_TFA		0x20 /* deal with TSX force abort */
 
 #define EVENT_VAR(_id)  event_attr_##_id
 #define EVENT_PTR(_id) &event_attr_##_id.attr.attr

Re: [PATCH 4.14 000/135] 4.14.106-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 105 boots: 1 failed, 103 passed with 1 untried/unknown (v4.14.105-136-gf881675936ef)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.105-136-gf881675936ef/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.105-136-gf881675936ef/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.105-136-gf881675936ef
Git Commit: f881675936ef263f178eab5a5cf95bc86089cf20
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 58 unique boards, 23 SoC families, 12 builds out of 197

Boot Failure Detected:

arm64:

    defconfig:
        gcc-7:
            rk3399-firefly: 1 failed lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 000/135] 4.14.106-stable review

[Naresh Kamboju]

On Tue, 12 Mar 2019 at 22:47, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.106 release.
> There are 135 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Mar 14 17:02:27 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.106-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.106-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: f881675936ef263f178eab5a5cf95bc86089cf20
git describe: v4.14.105-136-gf881675936ef
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.105-136-gf881675936ef

No regressions (compared to build v4.14.105)

No fixes (compared to build v4.14.105)

Ran 22869 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 000/135] 4.14.106-stable review

[Jon Hunter]

On 12/03/2019 17:07, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.106 release.
> There are 135 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 14 17:02:27 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    20 tests:	20 pass, 0 fail

Linux version:	4.14.106-rc1-g4dc8caa
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 000/135] 4.14.106-stable review

[Jon Hunter]

On 12/03/2019 17:07, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.106 release.
> There are 135 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 14 17:02:27 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    20 tests:	20 pass, 0 fail

Linux version:	4.14.106-rc1-g4dc8caa
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 000/135] 4.14.106-stable review

[Guenter Roeck]

On Tue, Mar 12, 2019 at 10:07:27AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.106 release.
> There are 135 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 14 17:02:27 UTC 2019.
> Anything received after that time might be too late.
> 
Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 329 pass: 329 fail: 0

Guenter