All of lore.kernel.org
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@wdc.com>
To: linux-block@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
	linux-scsi@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	dm-devel@redhat.com, Mike Snitzer <snitzer@redhat.com>,
	linux-f2fs-devel@lists.sourceforge.net,
	Jaegeuk Kim <jaegeuk@kernel.org>, Chao Yu <yuchao0@huawei.com>
Subject: [PATCH 4/9] block: Remove partition support for zoned block devices
Date: Fri,  8 Nov 2019 10:56:57 +0900	[thread overview]
Message-ID: <20191108015702.233102-5-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20191108015702.233102-1-damien.lemoal@wdc.com>

No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 block/blk-core.c          |  6 +---
 block/blk-zoned.c         | 62 ++++++--------------------------
 block/partition-generic.c | 74 +++++----------------------------------
 drivers/md/dm.c           |  3 --
 4 files changed, 21 insertions(+), 124 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 3306a3c5bed6..df6b70476187 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -851,11 +851,7 @@ static inline int blk_partition_remap(struct bio *bio)
 	if (unlikely(bio_check_ro(bio, p)))
 		goto out;
 
-	/*
-	 * Zone management bios do not have a sector count but they do have
-	 * a start sector filled out and need to be remapped.
-	 */
-	if (bio_sectors(bio) || op_is_zone_mgmt(bio_op(bio))) {
+	if (bio_sectors(bio)) {
 		if (bio_check_eod(bio, part_nr_sects_read(p)))
 			goto out;
 		bio->bi_iter.bi_sector += p->start_sect;
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index ea4e086ba00e..ae665e490858 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -93,32 +93,10 @@ unsigned int blkdev_nr_zones(struct block_device *bdev)
 	if (!blk_queue_is_zoned(q))
 		return 0;
 
-	return __blkdev_nr_zones(q, bdev->bd_part->nr_sects);
+	return __blkdev_nr_zones(q, get_capacity(bdev->bd_disk));
 }
 EXPORT_SYMBOL_GPL(blkdev_nr_zones);
 
-/*
- * Check that a zone report belongs to this partition, and if yes, fix its start
- * sector and write pointer and return true. Return false otherwise.
- */
-static bool blkdev_report_zone(struct block_device *bdev, struct blk_zone *rep)
-{
-	sector_t offset = get_start_sect(bdev);
-
-	if (rep->start < offset)
-		return false;
-
-	rep->start -= offset;
-	if (rep->start + rep->len > bdev->bd_part->nr_sects)
-		return false;
-
-	if (rep->type == BLK_ZONE_TYPE_CONVENTIONAL)
-		rep->wp = rep->start + rep->len;
-	else
-		rep->wp -= offset;
-	return true;
-}
-
 /**
  * blkdev_report_zones - Get zones information
  * @bdev:	Target block device
@@ -140,8 +118,7 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 	struct gendisk *disk = bdev->bd_disk;
-	unsigned int i, nrz;
-	int ret;
+	sector_t capacity = get_capacity(disk);
 
 	if (!blk_queue_is_zoned(q))
 		return -EOPNOTSUPP;
@@ -154,27 +131,14 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 	if (WARN_ON_ONCE(!disk->fops->report_zones))
 		return -EOPNOTSUPP;
 
-	if (!*nr_zones || sector >= bdev->bd_part->nr_sects) {
+	if (!*nr_zones || sector >= capacity) {
 		*nr_zones = 0;
 		return 0;
 	}
 
-	nrz = min(*nr_zones,
-		  __blkdev_nr_zones(q, bdev->bd_part->nr_sects - sector));
-	ret = disk->fops->report_zones(disk, get_start_sect(bdev) + sector,
-				       zones, &nrz);
-	if (ret)
-		return ret;
+	*nr_zones = min(*nr_zones, __blkdev_nr_zones(q, capacity - sector));
 
-	for (i = 0; i < nrz; i++) {
-		if (!blkdev_report_zone(bdev, zones))
-			break;
-		zones++;
-	}
-
-	*nr_zones = i;
-
-	return 0;
+	return disk->fops->report_zones(disk, sector, zones, nr_zones);
 }
 EXPORT_SYMBOL_GPL(blkdev_report_zones);
 
@@ -185,15 +149,11 @@ static inline bool blkdev_allow_reset_all_zones(struct block_device *bdev,
 	if (!blk_queue_zone_resetall(bdev_get_queue(bdev)))
 		return false;
 
-	if (sector || nr_sectors != part_nr_sects_read(bdev->bd_part))
-		return false;
 	/*
-	 * REQ_OP_ZONE_RESET_ALL can be executed only if the block device is
-	 * the entire disk, that is, if the blocks device start offset is 0 and
-	 * its capacity is the same as the entire disk.
+	 * REQ_OP_ZONE_RESET_ALL can be executed only if the number of sectors
+	 * of the applicable zone range is the entire disk.
 	 */
-	return get_start_sect(bdev) == 0 &&
-	       part_nr_sects_read(bdev->bd_part) == get_capacity(bdev->bd_disk);
+	return !sector && nr_sectors == get_capacity(bdev->bd_disk);
 }
 
 /**
@@ -218,6 +178,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 	sector_t zone_sectors = blk_queue_zone_sectors(q);
+	sector_t capacity = get_capacity(bdev->bd_disk);
 	sector_t end_sector = sector + nr_sectors;
 	struct bio *bio = NULL;
 	int ret;
@@ -231,7 +192,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if (!op_is_zone_mgmt(op))
 		return -EOPNOTSUPP;
 
-	if (!nr_sectors || end_sector > bdev->bd_part->nr_sects)
+	if (!nr_sectors || end_sector > capacity)
 		/* Out of range */
 		return -EINVAL;
 
@@ -239,8 +200,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if (sector & (zone_sectors - 1))
 		return -EINVAL;
 
-	if ((nr_sectors & (zone_sectors - 1)) &&
-	    end_sector != bdev->bd_part->nr_sects)
+	if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
 		return -EINVAL;
 
 	while (sector < end_sector) {
diff --git a/block/partition-generic.c b/block/partition-generic.c
index aee643ce13d1..31bff3fb28af 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -459,56 +459,6 @@ static int drop_partitions(struct gendisk *disk, struct block_device *bdev)
 	return 0;
 }
 
-static bool part_zone_aligned(struct gendisk *disk,
-			      struct block_device *bdev,
-			      sector_t from, sector_t size)
-{
-	unsigned int zone_sectors = bdev_zone_sectors(bdev);
-
-	/*
-	 * If this function is called, then the disk is a zoned block device
-	 * (host-aware or host-managed). This can be detected even if the
-	 * zoned block device support is disabled (CONFIG_BLK_DEV_ZONED not
-	 * set). In this case, however, only host-aware devices will be seen
-	 * as a block device is not created for host-managed devices. Without
-	 * zoned block device support, host-aware drives can still be used as
-	 * regular block devices (no zone operation) and their zone size will
-	 * be reported as 0. Allow this case.
-	 */
-	if (!zone_sectors)
-		return true;
-
-	/*
-	 * Check partition start and size alignement. If the drive has a
-	 * smaller last runt zone, ignore it and allow the partition to
-	 * use it. Check the zone size too: it should be a power of 2 number
-	 * of sectors.
-	 */
-	if (WARN_ON_ONCE(!is_power_of_2(zone_sectors))) {
-		u32 rem;
-
-		div_u64_rem(from, zone_sectors, &rem);
-		if (rem)
-			return false;
-		if ((from + size) < get_capacity(disk)) {
-			div_u64_rem(size, zone_sectors, &rem);
-			if (rem)
-				return false;
-		}
-
-	} else {
-
-		if (from & (zone_sectors - 1))
-			return false;
-		if ((from + size) < get_capacity(disk) &&
-		    (size & (zone_sectors - 1)))
-			return false;
-
-	}
-
-	return true;
-}
-
 int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 {
 	struct parsed_partitions *state = NULL;
@@ -544,6 +494,14 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		}
 		return -EIO;
 	}
+
+	/* Partitions are not supported on zoned block devices */
+	if (bdev_is_zoned(bdev)) {
+		pr_warn("%s: ignoring partition table on zoned block device\n",
+			disk->disk_name);
+		goto out;
+	}
+
 	/*
 	 * If any partition code tried to read beyond EOD, try
 	 * unlocking native capacity even if partition table is
@@ -607,21 +565,6 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 			}
 		}
 
-		/*
-		 * On a zoned block device, partitions should be aligned on the
-		 * device zone size (i.e. zone boundary crossing not allowed).
-		 * Otherwise, resetting the write pointer of the last zone of
-		 * one partition may impact the following partition.
-		 */
-		if (bdev_is_zoned(bdev) &&
-		    !part_zone_aligned(disk, bdev, from, size)) {
-			printk(KERN_WARNING
-			       "%s: p%d start %llu+%llu is not zone aligned\n",
-			       disk->disk_name, p, (unsigned long long) from,
-			       (unsigned long long) size);
-			continue;
-		}
-
 		part = add_partition(disk, p, from, size,
 				     state->parts[p].flags,
 				     &state->parts[p].info);
@@ -635,6 +578,7 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 			md_autodetect_dev(part_to_dev(part)->devt);
 #endif
 	}
+out:
 	free_partitions(state);
 	return 0;
 }
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 89189c29438f..76f4cfdd6b41 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1211,9 +1211,6 @@ EXPORT_SYMBOL_GPL(dm_accept_partial_bio);
  * The zone descriptors obtained with a zone report indicate
  * zone positions within the underlying device of the target. The zone
  * descriptors must be remapped to match their position within the dm device.
- * The caller target should obtain the zones information using
- * blkdev_report_zones() to ensure that remapping for partition offset is
- * already handled.
  */
 void dm_remap_zone_report(struct dm_target *ti, sector_t start,
 			  struct blk_zone *zones, unsigned int *nr_zones)
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Damien Le Moal <damien.lemoal@wdc.com>
To: linux-block@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
	linux-scsi@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	dm-devel@redhat.com, Mike Snitzer <snitzer@redhat.com>,
	linux-f2fs-devel@lists.sourceforge.net,
	Jaegeuk Kim <jaegeuk@kernel.org>, Chao Yu <yuchao0@huawei.com>
Subject: [f2fs-dev] [PATCH 4/9] block: Remove partition support for zoned block devices
Date: Fri,  8 Nov 2019 10:56:57 +0900	[thread overview]
Message-ID: <20191108015702.233102-5-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20191108015702.233102-1-damien.lemoal@wdc.com>

No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 block/blk-core.c          |  6 +---
 block/blk-zoned.c         | 62 ++++++--------------------------
 block/partition-generic.c | 74 +++++----------------------------------
 drivers/md/dm.c           |  3 --
 4 files changed, 21 insertions(+), 124 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 3306a3c5bed6..df6b70476187 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -851,11 +851,7 @@ static inline int blk_partition_remap(struct bio *bio)
 	if (unlikely(bio_check_ro(bio, p)))
 		goto out;
 
-	/*
-	 * Zone management bios do not have a sector count but they do have
-	 * a start sector filled out and need to be remapped.
-	 */
-	if (bio_sectors(bio) || op_is_zone_mgmt(bio_op(bio))) {
+	if (bio_sectors(bio)) {
 		if (bio_check_eod(bio, part_nr_sects_read(p)))
 			goto out;
 		bio->bi_iter.bi_sector += p->start_sect;
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index ea4e086ba00e..ae665e490858 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -93,32 +93,10 @@ unsigned int blkdev_nr_zones(struct block_device *bdev)
 	if (!blk_queue_is_zoned(q))
 		return 0;
 
-	return __blkdev_nr_zones(q, bdev->bd_part->nr_sects);
+	return __blkdev_nr_zones(q, get_capacity(bdev->bd_disk));
 }
 EXPORT_SYMBOL_GPL(blkdev_nr_zones);
 
-/*
- * Check that a zone report belongs to this partition, and if yes, fix its start
- * sector and write pointer and return true. Return false otherwise.
- */
-static bool blkdev_report_zone(struct block_device *bdev, struct blk_zone *rep)
-{
-	sector_t offset = get_start_sect(bdev);
-
-	if (rep->start < offset)
-		return false;
-
-	rep->start -= offset;
-	if (rep->start + rep->len > bdev->bd_part->nr_sects)
-		return false;
-
-	if (rep->type == BLK_ZONE_TYPE_CONVENTIONAL)
-		rep->wp = rep->start + rep->len;
-	else
-		rep->wp -= offset;
-	return true;
-}
-
 /**
  * blkdev_report_zones - Get zones information
  * @bdev:	Target block device
@@ -140,8 +118,7 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 	struct gendisk *disk = bdev->bd_disk;
-	unsigned int i, nrz;
-	int ret;
+	sector_t capacity = get_capacity(disk);
 
 	if (!blk_queue_is_zoned(q))
 		return -EOPNOTSUPP;
@@ -154,27 +131,14 @@ int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 	if (WARN_ON_ONCE(!disk->fops->report_zones))
 		return -EOPNOTSUPP;
 
-	if (!*nr_zones || sector >= bdev->bd_part->nr_sects) {
+	if (!*nr_zones || sector >= capacity) {
 		*nr_zones = 0;
 		return 0;
 	}
 
-	nrz = min(*nr_zones,
-		  __blkdev_nr_zones(q, bdev->bd_part->nr_sects - sector));
-	ret = disk->fops->report_zones(disk, get_start_sect(bdev) + sector,
-				       zones, &nrz);
-	if (ret)
-		return ret;
+	*nr_zones = min(*nr_zones, __blkdev_nr_zones(q, capacity - sector));
 
-	for (i = 0; i < nrz; i++) {
-		if (!blkdev_report_zone(bdev, zones))
-			break;
-		zones++;
-	}
-
-	*nr_zones = i;
-
-	return 0;
+	return disk->fops->report_zones(disk, sector, zones, nr_zones);
 }
 EXPORT_SYMBOL_GPL(blkdev_report_zones);
 
@@ -185,15 +149,11 @@ static inline bool blkdev_allow_reset_all_zones(struct block_device *bdev,
 	if (!blk_queue_zone_resetall(bdev_get_queue(bdev)))
 		return false;
 
-	if (sector || nr_sectors != part_nr_sects_read(bdev->bd_part))
-		return false;
 	/*
-	 * REQ_OP_ZONE_RESET_ALL can be executed only if the block device is
-	 * the entire disk, that is, if the blocks device start offset is 0 and
-	 * its capacity is the same as the entire disk.
+	 * REQ_OP_ZONE_RESET_ALL can be executed only if the number of sectors
+	 * of the applicable zone range is the entire disk.
 	 */
-	return get_start_sect(bdev) == 0 &&
-	       part_nr_sects_read(bdev->bd_part) == get_capacity(bdev->bd_disk);
+	return !sector && nr_sectors == get_capacity(bdev->bd_disk);
 }
 
 /**
@@ -218,6 +178,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 {
 	struct request_queue *q = bdev_get_queue(bdev);
 	sector_t zone_sectors = blk_queue_zone_sectors(q);
+	sector_t capacity = get_capacity(bdev->bd_disk);
 	sector_t end_sector = sector + nr_sectors;
 	struct bio *bio = NULL;
 	int ret;
@@ -231,7 +192,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if (!op_is_zone_mgmt(op))
 		return -EOPNOTSUPP;
 
-	if (!nr_sectors || end_sector > bdev->bd_part->nr_sects)
+	if (!nr_sectors || end_sector > capacity)
 		/* Out of range */
 		return -EINVAL;
 
@@ -239,8 +200,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if (sector & (zone_sectors - 1))
 		return -EINVAL;
 
-	if ((nr_sectors & (zone_sectors - 1)) &&
-	    end_sector != bdev->bd_part->nr_sects)
+	if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
 		return -EINVAL;
 
 	while (sector < end_sector) {
diff --git a/block/partition-generic.c b/block/partition-generic.c
index aee643ce13d1..31bff3fb28af 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -459,56 +459,6 @@ static int drop_partitions(struct gendisk *disk, struct block_device *bdev)
 	return 0;
 }
 
-static bool part_zone_aligned(struct gendisk *disk,
-			      struct block_device *bdev,
-			      sector_t from, sector_t size)
-{
-	unsigned int zone_sectors = bdev_zone_sectors(bdev);
-
-	/*
-	 * If this function is called, then the disk is a zoned block device
-	 * (host-aware or host-managed). This can be detected even if the
-	 * zoned block device support is disabled (CONFIG_BLK_DEV_ZONED not
-	 * set). In this case, however, only host-aware devices will be seen
-	 * as a block device is not created for host-managed devices. Without
-	 * zoned block device support, host-aware drives can still be used as
-	 * regular block devices (no zone operation) and their zone size will
-	 * be reported as 0. Allow this case.
-	 */
-	if (!zone_sectors)
-		return true;
-
-	/*
-	 * Check partition start and size alignement. If the drive has a
-	 * smaller last runt zone, ignore it and allow the partition to
-	 * use it. Check the zone size too: it should be a power of 2 number
-	 * of sectors.
-	 */
-	if (WARN_ON_ONCE(!is_power_of_2(zone_sectors))) {
-		u32 rem;
-
-		div_u64_rem(from, zone_sectors, &rem);
-		if (rem)
-			return false;
-		if ((from + size) < get_capacity(disk)) {
-			div_u64_rem(size, zone_sectors, &rem);
-			if (rem)
-				return false;
-		}
-
-	} else {
-
-		if (from & (zone_sectors - 1))
-			return false;
-		if ((from + size) < get_capacity(disk) &&
-		    (size & (zone_sectors - 1)))
-			return false;
-
-	}
-
-	return true;
-}
-
 int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 {
 	struct parsed_partitions *state = NULL;
@@ -544,6 +494,14 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		}
 		return -EIO;
 	}
+
+	/* Partitions are not supported on zoned block devices */
+	if (bdev_is_zoned(bdev)) {
+		pr_warn("%s: ignoring partition table on zoned block device\n",
+			disk->disk_name);
+		goto out;
+	}
+
 	/*
 	 * If any partition code tried to read beyond EOD, try
 	 * unlocking native capacity even if partition table is
@@ -607,21 +565,6 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 			}
 		}
 
-		/*
-		 * On a zoned block device, partitions should be aligned on the
-		 * device zone size (i.e. zone boundary crossing not allowed).
-		 * Otherwise, resetting the write pointer of the last zone of
-		 * one partition may impact the following partition.
-		 */
-		if (bdev_is_zoned(bdev) &&
-		    !part_zone_aligned(disk, bdev, from, size)) {
-			printk(KERN_WARNING
-			       "%s: p%d start %llu+%llu is not zone aligned\n",
-			       disk->disk_name, p, (unsigned long long) from,
-			       (unsigned long long) size);
-			continue;
-		}
-
 		part = add_partition(disk, p, from, size,
 				     state->parts[p].flags,
 				     &state->parts[p].info);
@@ -635,6 +578,7 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 			md_autodetect_dev(part_to_dev(part)->devt);
 #endif
 	}
+out:
 	free_partitions(state);
 	return 0;
 }
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 89189c29438f..76f4cfdd6b41 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1211,9 +1211,6 @@ EXPORT_SYMBOL_GPL(dm_accept_partial_bio);
  * The zone descriptors obtained with a zone report indicate
  * zone positions within the underlying device of the target. The zone
  * descriptors must be remapped to match their position within the dm device.
- * The caller target should obtain the zones information using
- * blkdev_report_zones() to ensure that remapping for partition offset is
- * already handled.
  */
 void dm_remap_zone_report(struct dm_target *ti, sector_t start,
 			  struct blk_zone *zones, unsigned int *nr_zones)
-- 
2.23.0



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  parent reply	other threads:[~2019-11-08  1:57 UTC|newest]

Thread overview: 82+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-08  1:56 [PATCH 0/9] Zoned block device enhancements and zone report rework Damien Le Moal
2019-11-08  1:56 ` [f2fs-dev] " Damien Le Moal
2019-11-08  1:56 ` [PATCH 1/9] block: Enhance blk_revalidate_disk_zones() Damien Le Moal
2019-11-08  1:56   ` [f2fs-dev] " Damien Le Moal
2019-11-08  6:28   ` [dm-devel] " Christoph Hellwig
2019-11-08  6:28     ` Christoph Hellwig
2019-11-08  6:28     ` [f2fs-dev] " Christoph Hellwig
2019-11-08  7:10   ` Hannes Reinecke
2019-11-08  7:10     ` Hannes Reinecke
2019-11-08  7:10     ` [f2fs-dev] " Hannes Reinecke
2019-11-08  1:56 ` [PATCH 2/9] block: cleanup the !zoned case in blk_revalidate_disk_zones Damien Le Moal
2019-11-08  1:56   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:11   ` Hannes Reinecke
2019-11-08  7:11     ` Hannes Reinecke
2019-11-08  7:11     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 18:50   ` Chaitanya Kulkarni
2019-11-08 18:50     ` Chaitanya Kulkarni
2019-11-08 18:50     ` [f2fs-dev] " Chaitanya Kulkarni
2019-11-08  1:56 ` [PATCH 3/9] block: Simplify report zones execution Damien Le Moal
2019-11-08  1:56   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:12   ` Hannes Reinecke
2019-11-08  7:12     ` Hannes Reinecke
2019-11-08  7:12     ` [f2fs-dev] " Hannes Reinecke
2019-11-08  1:56 ` Damien Le Moal [this message]
2019-11-08  1:56   ` [f2fs-dev] [PATCH 4/9] block: Remove partition support for zoned block devices Damien Le Moal
2019-11-08  6:30   ` [dm-devel] " Christoph Hellwig
2019-11-08  6:30     ` Christoph Hellwig
2019-11-08  6:30     ` [f2fs-dev] " Christoph Hellwig
2019-11-08  7:17   ` Hannes Reinecke
2019-11-08  7:17     ` Hannes Reinecke
2019-11-08  7:17     ` [f2fs-dev] " Hannes Reinecke
2019-11-08  7:28     ` Damien Le Moal
2019-11-08  7:28       ` Damien Le Moal
2019-11-08  7:28       ` [f2fs-dev] " Damien Le Moal
2019-11-08  1:56 ` [PATCH 5/9] null_blk: clean up the block device operations Damien Le Moal
2019-11-08  1:56   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:17   ` Hannes Reinecke
2019-11-08  7:17     ` Hannes Reinecke
2019-11-08  7:17     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 18:47   ` Chaitanya Kulkarni
2019-11-08 18:47     ` Chaitanya Kulkarni
2019-11-08 18:47     ` [f2fs-dev] " Chaitanya Kulkarni
2019-11-08  1:56 ` [PATCH 6/9] null_blk: clean up report zones Damien Le Moal
2019-11-08  1:56   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:18   ` Hannes Reinecke
2019-11-08  7:18     ` Hannes Reinecke
2019-11-08  7:18     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 18:47   ` Chaitanya Kulkarni
2019-11-08 18:47     ` Chaitanya Kulkarni
2019-11-08 18:47     ` [f2fs-dev] " Chaitanya Kulkarni
2019-11-08  1:57 ` [PATCH 7/9] null_blk: Add zone_nr_conv to features Damien Le Moal
2019-11-08  1:57   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:18   ` Hannes Reinecke
2019-11-08  7:18     ` Hannes Reinecke
2019-11-08  7:18     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 18:48   ` Chaitanya Kulkarni
2019-11-08 18:48     ` Chaitanya Kulkarni
2019-11-08 18:48     ` [f2fs-dev] " Chaitanya Kulkarni
2019-11-08  1:57 ` [PATCH 8/9] scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer() Damien Le Moal
2019-11-08  1:57   ` [f2fs-dev] " Damien Le Moal
2019-11-08  6:31   ` [dm-devel] " Christoph Hellwig
2019-11-08  6:31     ` Christoph Hellwig
2019-11-08  6:31     ` [f2fs-dev] " Christoph Hellwig
2019-11-08  7:20   ` Hannes Reinecke
2019-11-08  7:20     ` Hannes Reinecke
2019-11-08  7:20     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 19:06   ` [dm-devel] " Bart Van Assche
2019-11-08 19:06     ` [f2fs-dev] " Bart Van Assche
2019-11-09  2:54     ` Damien Le Moal
2019-11-09  2:54       ` Damien Le Moal
2019-11-09  2:54       ` [f2fs-dev] " Damien Le Moal
2019-11-09  3:02       ` Bart Van Assche
2019-11-09  3:02         ` Bart Van Assche
2019-11-09  3:02         ` [f2fs-dev] " Bart Van Assche
2019-11-08  1:57 ` [PATCH 9/9] block: rework zone reporting Damien Le Moal
2019-11-08  1:57   ` [f2fs-dev] " Damien Le Moal
2019-11-08  7:23   ` Hannes Reinecke
2019-11-08  7:23     ` Hannes Reinecke
2019-11-08  7:23     ` [f2fs-dev] " Hannes Reinecke
2019-11-08 15:16   ` Mike Snitzer
2019-11-08 15:16     ` Mike Snitzer
2019-11-08 15:16     ` [f2fs-dev] " Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191108015702.233102-5-damien.lemoal@wdc.com \
    --to=damien.lemoal@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=dm-devel@redhat.com \
    --cc=jaegeuk@kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=snitzer@redhat.com \
    --cc=yuchao0@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.