From: Nishanth Menon <nm@ti.com> To: Suman Anna <s-anna@ti.com> Cc: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com>, "J, KEERTHY" <j-keerthy@ti.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Vignesh Raghavendra <vigneshr@ti.com>, <lokeshvutla@ti.com>, <grygorii.strashko@ti.com>, <nsekhar@ti.com> Subject: Re: [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Date: Wed, 2 Sep 2020 13:14:39 -0500 [thread overview] Message-ID: <20200902181439.ywzxknv3vb7fcfeo@akan> (raw) In-Reply-To: <1cdb8cb1-3a08-423d-ba34-299ac1a4b9b4@ti.com> On 11:55-20200902, Suman Anna wrote: > On 9/1/20 5:30 PM, Nishanth Menon wrote: > > Use temperature-sensor@ naming for nodes following standard conventions of device > > tree (section 2.2.2 Generic Names recommendation in [1]). > > > > [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 > > > > Suggested-by: Suman Anna <s-anna@ti.com> > > Suggested-by: Vignesh Raghavendra <vigneshr@ti.com> > > Signed-off-by: Nishanth Menon <nm@ti.com> > > --- > > arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > index bb498be2f0a4..ed42f13e7663 100644 > > --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > @@ -95,7 +95,7 @@ > > clock-names = "gpio"; > > }; > > > > - wkup_vtm0: thermal@42050000 { > > + wkup_vtm0: temperature-sensor@42050000 { > > There has been a suggestion to use something like thermal-sensor during the > bindings review, but it is better to use this standard node name. Yes - I did notice it as well, and then picked up the recommendation straight from 0.3 spec itself. > > Reviewed-by: Suman Anna <s-anna@ti.com> > > regards > Suman > > > compatible = "ti,am654-vtm"; > > reg = <0x42050000 0x25c>; > > power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; > > > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com> To: Suman Anna <s-anna@ti.com> Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com, Vignesh Raghavendra <vigneshr@ti.com>, lokeshvutla@ti.com, "J, KEERTHY" <j-keerthy@ti.com>, nsekhar@ti.com, linux-kernel@vger.kernel.org, Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Date: Wed, 2 Sep 2020 13:14:39 -0500 [thread overview] Message-ID: <20200902181439.ywzxknv3vb7fcfeo@akan> (raw) In-Reply-To: <1cdb8cb1-3a08-423d-ba34-299ac1a4b9b4@ti.com> On 11:55-20200902, Suman Anna wrote: > On 9/1/20 5:30 PM, Nishanth Menon wrote: > > Use temperature-sensor@ naming for nodes following standard conventions of device > > tree (section 2.2.2 Generic Names recommendation in [1]). > > > > [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 > > > > Suggested-by: Suman Anna <s-anna@ti.com> > > Suggested-by: Vignesh Raghavendra <vigneshr@ti.com> > > Signed-off-by: Nishanth Menon <nm@ti.com> > > --- > > arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > index bb498be2f0a4..ed42f13e7663 100644 > > --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi > > @@ -95,7 +95,7 @@ > > clock-names = "gpio"; > > }; > > > > - wkup_vtm0: thermal@42050000 { > > + wkup_vtm0: temperature-sensor@42050000 { > > There has been a suggestion to use something like thermal-sensor during the > bindings review, but it is better to use this standard node name. Yes - I did notice it as well, and then picked up the recommendation straight from 0.3 spec itself. > > Reviewed-by: Suman Anna <s-anna@ti.com> > > regards > Suman > > > compatible = "ti,am654-vtm"; > > reg = <0x42050000 0x25c>; > > power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; > > > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-02 18:14 UTC|newest] Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:13 ` Suman Anna 2020-09-02 4:13 ` Suman Anna 2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 17:45 ` Suman Anna 2020-09-02 17:45 ` Suman Anna 2020-09-02 18:21 ` Nishanth Menon 2020-09-02 18:21 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:55 ` Suman Anna 2020-09-02 16:55 ` Suman Anna 2020-09-02 18:14 ` Nishanth Menon [this message] 2020-09-02 18:14 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:51 ` Suman Anna 2020-09-02 16:51 ` Suman Anna 2020-09-02 18:18 ` Nishanth Menon 2020-09-02 18:18 ` Nishanth Menon 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 11:23 ` Nishanth Menon 2020-09-03 11:23 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:54 ` Suman Anna 2020-09-02 16:54 ` Suman Anna 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla 2020-09-02 3:36 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:24 ` Suman Anna 2020-09-03 13:24 ` Suman Anna 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200902181439.ywzxknv3vb7fcfeo@akan \ --to=nm@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=j-keerthy@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lokeshvutla@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.