From: Suman Anna <s-anna@ti.com> To: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Vignesh Raghavendra <vigneshr@ti.com>, <lokeshvutla@ti.com>, <grygorii.strashko@ti.com>, <nsekhar@ti.com> Subject: Re: [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Date: Tue, 1 Sep 2020 23:14:24 -0500 [thread overview] Message-ID: <cf468b1c-2717-b579-93d5-2ca0b8a97f93@ti.com> (raw) In-Reply-To: <20200901223059.14801-5-nm@ti.com> On 9/1/20 5:30 PM, Nishanth Menon wrote: > Use camera@ naming for nodes following standard conventions of device > tree (section 2.2.2 Generic Names recommendation in [1]). > > [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 > > Suggested-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Suman Anna <s-anna@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > index b8a8a0fcb8af..86c9074cb070 100644 > --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > @@ -257,7 +257,7 @@ > pinctrl-0 = <&main_i2c1_pins_default>; > clock-frequency = <400000>; > > - ov5640@3c { > + ov5640: camera@3c { > compatible = "ovti,ov5640"; > reg = <0x3c>; > >
WARNING: multiple messages have this Message-ID (diff)
From: Suman Anna <s-anna@ti.com> To: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com, Vignesh Raghavendra <vigneshr@ti.com>, lokeshvutla@ti.com, nsekhar@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Date: Tue, 1 Sep 2020 23:14:24 -0500 [thread overview] Message-ID: <cf468b1c-2717-b579-93d5-2ca0b8a97f93@ti.com> (raw) In-Reply-To: <20200901223059.14801-5-nm@ti.com> On 9/1/20 5:30 PM, Nishanth Menon wrote: > Use camera@ naming for nodes following standard conventions of device > tree (section 2.2.2 Generic Names recommendation in [1]). > > [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 > > Suggested-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Suman Anna <s-anna@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > index b8a8a0fcb8af..86c9074cb070 100644 > --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > @@ -257,7 +257,7 @@ > pinctrl-0 = <&main_i2c1_pins_default>; > clock-frequency = <400000>; > > - ov5640@3c { > + ov5640: camera@3c { > compatible = "ovti,ov5640"; > reg = <0x3c>; > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-02 4:14 UTC|newest] Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:13 ` Suman Anna 2020-09-02 4:13 ` Suman Anna 2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 17:45 ` Suman Anna 2020-09-02 17:45 ` Suman Anna 2020-09-02 18:21 ` Nishanth Menon 2020-09-02 18:21 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna [this message] 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:55 ` Suman Anna 2020-09-02 16:55 ` Suman Anna 2020-09-02 18:14 ` Nishanth Menon 2020-09-02 18:14 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:51 ` Suman Anna 2020-09-02 16:51 ` Suman Anna 2020-09-02 18:18 ` Nishanth Menon 2020-09-02 18:18 ` Nishanth Menon 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 11:23 ` Nishanth Menon 2020-09-03 11:23 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:54 ` Suman Anna 2020-09-02 16:54 ` Suman Anna 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla 2020-09-02 3:36 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:24 ` Suman Anna 2020-09-03 13:24 ` Suman Anna 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cf468b1c-2717-b579-93d5-2ca0b8a97f93@ti.com \ --to=s-anna@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lokeshvutla@ti.com \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.