From: Nishanth Menon <nm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Suman Anna <s-anna@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, <lokeshvutla@ti.com>, <grygorii.strashko@ti.com>, <nsekhar@ti.com>, Nishanth Menon <nm@ti.com> Subject: [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Date: Thu, 3 Sep 2020 08:00:11 -0500 [thread overview] Message-ID: <20200903130015.21361-5-nm@ti.com> (raw) In-Reply-To: <20200901223059.14801-1-nm@ti.com> serdes and ehrpwm_tbclk nodes should be using clock@ naming for nodes following standard conventions of device tree (section 2.2.2 Generic Names recommendation in [1]). [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Suman Anna <s-anna@ti.com> --- Change: v2: added ehrpwm_tbclk based on review comments. v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-3-nm@ti.com/ arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index a2fc508e59a6..63a1299cb0b2 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -327,12 +327,12 @@ reg = <0x00000210 0x4>; }; - serdes0_clk: serdes_clk@4080 { + serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; }; - serdes1_clk: serdes_clk@4090 { + serdes1_clk: clock@4090 { compatible = "syscon"; reg = <0x00004090 0x4>; }; @@ -349,7 +349,7 @@ reg = <0x0000041e0 0x14>; }; - ehrpwm_tbclk: syscon@4140 { + ehrpwm_tbclk: clock@4140 { compatible = "ti,am654-ehrpwm-tbclk", "syscon"; reg = <0x4140 0x18>; #clock-cells = <1>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: Nishanth Menon <nm@ti.com>, devicetree@vger.kernel.org, grygorii.strashko@ti.com, Vignesh Raghavendra <vigneshr@ti.com>, lokeshvutla@ti.com, nsekhar@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Date: Thu, 3 Sep 2020 08:00:11 -0500 [thread overview] Message-ID: <20200903130015.21361-5-nm@ti.com> (raw) In-Reply-To: <20200901223059.14801-1-nm@ti.com> serdes and ehrpwm_tbclk nodes should be using clock@ naming for nodes following standard conventions of device tree (section 2.2.2 Generic Names recommendation in [1]). [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Suman Anna <s-anna@ti.com> --- Change: v2: added ehrpwm_tbclk based on review comments. v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-3-nm@ti.com/ arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index a2fc508e59a6..63a1299cb0b2 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -327,12 +327,12 @@ reg = <0x00000210 0x4>; }; - serdes0_clk: serdes_clk@4080 { + serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; }; - serdes1_clk: serdes_clk@4090 { + serdes1_clk: clock@4090 { compatible = "syscon"; reg = <0x00004090 0x4>; }; @@ -349,7 +349,7 @@ reg = <0x0000041e0 0x14>; }; - ehrpwm_tbclk: syscon@4140 { + ehrpwm_tbclk: clock@4140 { compatible = "ti,am654-ehrpwm-tbclk", "syscon"; reg = <0x4140 0x18>; #clock-cells = <1>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-03 13:42 UTC|newest] Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:13 ` Suman Anna 2020-09-02 4:13 ` Suman Anna 2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 17:45 ` Suman Anna 2020-09-02 17:45 ` Suman Anna 2020-09-02 18:21 ` Nishanth Menon 2020-09-02 18:21 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:55 ` Suman Anna 2020-09-02 16:55 ` Suman Anna 2020-09-02 18:14 ` Nishanth Menon 2020-09-02 18:14 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:51 ` Suman Anna 2020-09-02 16:51 ` Suman Anna 2020-09-02 18:18 ` Nishanth Menon 2020-09-02 18:18 ` Nishanth Menon 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 11:23 ` Nishanth Menon 2020-09-03 11:23 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:54 ` Suman Anna 2020-09-02 16:54 ` Suman Anna 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla 2020-09-02 3:36 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:24 ` Suman Anna 2020-09-03 13:24 ` Suman Anna 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon [this message] 2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200903130015.21361-5-nm@ti.com \ --to=nm@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lokeshvutla@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.