From: Nishanth Menon <nm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Suman Anna <s-anna@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, <lokeshvutla@ti.com>, <grygorii.strashko@ti.com>, <nsekhar@ti.com>, Nishanth Menon <nm@ti.com> Subject: [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Date: Thu, 3 Sep 2020 08:00:12 -0500 [thread overview] Message-ID: <20200903130015.21361-6-nm@ti.com> (raw) In-Reply-To: <20200901223059.14801-1-nm@ti.com> Use pinctrl@ naming for nodes following standard conventions of device tree (section 2.2.2 Generic Names recommendation in [1]). [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Suman Anna <s-anna@ti.com> --- Changes: v2: None (picked acks/reviews) v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-4-nm@ti.com/ arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 63a1299cb0b2..1dd488cb15c6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -134,7 +134,7 @@ }; }; - main_pmx0: pinmux@11c000 { + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; reg = <0x0 0x11c000 0x0 0x2e4>; #pinctrl-cells = <1>; @@ -142,7 +142,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - main_pmx1: pinmux@11c2e8 { + main_pmx1: pinctrl@11c2e8 { compatible = "pinctrl-single"; reg = <0x0 0x11c2e8 0x0 0x24>; #pinctrl-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 0765700a8ba8..bb498be2f0a4 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -39,7 +39,7 @@ reg = <0x43000014 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; reg = <0x4301c000 0x118>; #pinctrl-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 00a36a14efe7..1d2a7c05b6f3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -327,7 +327,7 @@ }; }; - main_pmx0: pinmux@11c000 { + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x0 0x11c000 0x0 0x2b4>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index c4a48e8d420a..9ad0266598ad 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -53,7 +53,7 @@ reg = <0x0 0x43000014 0x0 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x178>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com> To: Rob Herring <robh+dt@kernel.org>, Tero Kristo <t-kristo@ti.com> Cc: Nishanth Menon <nm@ti.com>, devicetree@vger.kernel.org, grygorii.strashko@ti.com, Vignesh Raghavendra <vigneshr@ti.com>, lokeshvutla@ti.com, nsekhar@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Date: Thu, 3 Sep 2020 08:00:12 -0500 [thread overview] Message-ID: <20200903130015.21361-6-nm@ti.com> (raw) In-Reply-To: <20200901223059.14801-1-nm@ti.com> Use pinctrl@ naming for nodes following standard conventions of device tree (section 2.2.2 Generic Names recommendation in [1]). [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3 Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Suman Anna <s-anna@ti.com> --- Changes: v2: None (picked acks/reviews) v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-4-nm@ti.com/ arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 63a1299cb0b2..1dd488cb15c6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -134,7 +134,7 @@ }; }; - main_pmx0: pinmux@11c000 { + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; reg = <0x0 0x11c000 0x0 0x2e4>; #pinctrl-cells = <1>; @@ -142,7 +142,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - main_pmx1: pinmux@11c2e8 { + main_pmx1: pinctrl@11c2e8 { compatible = "pinctrl-single"; reg = <0x0 0x11c2e8 0x0 0x24>; #pinctrl-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 0765700a8ba8..bb498be2f0a4 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -39,7 +39,7 @@ reg = <0x43000014 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; reg = <0x4301c000 0x118>; #pinctrl-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 00a36a14efe7..1d2a7c05b6f3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -327,7 +327,7 @@ }; }; - main_pmx0: pinmux@11c000 { + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x0 0x11c000 0x0 0x2b4>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index c4a48e8d420a..9ad0266598ad 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -53,7 +53,7 @@ reg = <0x0 0x43000014 0x0 0x4>; }; - wkup_pmx0: pinmux@4301c000 { + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x178>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-03 13:37 UTC|newest] Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:13 ` Suman Anna 2020-09-02 4:13 ` Suman Anna 2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 17:45 ` Suman Anna 2020-09-02 17:45 ` Suman Anna 2020-09-02 18:21 ` Nishanth Menon 2020-09-02 18:21 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 4:14 ` Suman Anna 2020-09-02 4:14 ` Suman Anna 2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:55 ` Suman Anna 2020-09-02 16:55 ` Suman Anna 2020-09-02 18:14 ` Nishanth Menon 2020-09-02 18:14 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:51 ` Suman Anna 2020-09-02 16:51 ` Suman Anna 2020-09-02 18:18 ` Nishanth Menon 2020-09-02 18:18 ` Nishanth Menon 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 5:25 ` Vignesh Raghavendra 2020-09-03 11:23 ` Nishanth Menon 2020-09-03 11:23 ` Nishanth Menon 2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon 2020-09-01 22:30 ` Nishanth Menon 2020-09-02 16:54 ` Suman Anna 2020-09-02 16:54 ` Suman Anna 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 18:16 ` Nishanth Menon 2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla 2020-09-02 3:36 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-07 11:54 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 13:23 ` Suman Anna 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 14:01 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:24 ` Suman Anna 2020-09-03 13:24 ` Suman Anna 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 14:02 ` Lokesh Vutla 2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:21 ` Vignesh Raghavendra 2020-09-03 13:00 ` Nishanth Menon [this message] 2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:20 ` Vignesh Raghavendra 2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon 2020-09-03 13:00 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200903130015.21361-6-nm@ti.com \ --to=nm@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=grygorii.strashko@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lokeshvutla@ti.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.