All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland@arm.com>
To: Fuad Tabba <tabba@google.com>
Cc: linux-arm-kernel@lists.infradead.org, will@kernel.org,
	catalin.marinas@arm.com, maz@kernel.org, ardb@kernel.org,
	james.morse@arm.com, alexandru.elisei@arm.com,
	suzuki.poulose@arm.com, robin.murphy@arm.com
Subject: Re: [PATCH v4 04/18] arm64: Do not enable uaccess for flush_icache_range
Date: Mon, 24 May 2021 10:57:30 +0100	[thread overview]
Message-ID: <20210524095730.GB1040@C02TD0UTHF1T.local> (raw)
In-Reply-To: <20210524083001.2586635-5-tabba@google.com>

On Mon, May 24, 2021 at 09:29:47AM +0100, Fuad Tabba wrote:
> __flush_icache_range works on kernel addresses, and doesn't need
> uaccess. The existing code is a side-effect of its current
> implementation with __flush_cache_user_range fallthrough.
> 
> Instead of fallthrough to share the code, use a common macro for
> the two where the caller specifies an optional fixup label if
> user access is needed. If provided, this label would be used to
> generate an extable entry.
> 
> Simplify the code to use dcache_by_line_op, instead of
> replicating much of its functionality.
> 
> No functional change intended.
> Possible performance impact due to the reduced number of
> instructions.
> 
> Reported-by: Catalin Marinas <catalin.marinas@arm.com>
> Reported-by: Will Deacon <will@kernel.org>
> Reported-by: Mark Rutland <mark.rutland@arm.com>
> Link: https://lore.kernel.org/linux-arch/20200511110014.lb9PEahJ4hVOYrbwIb_qUHXyNy9KQzNFdb_I3YlzY6A@z/
> Link: https://lore.kernel.org/linux-arm-kernel/20210521121846.GB1040@C02TD0UTHF1T.local/
> Signed-off-by: Fuad Tabba <tabba@google.com>

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm64/mm/cache.S | 57 ++++++++++++++++++++++++++-----------------
>  1 file changed, 34 insertions(+), 23 deletions(-)
> 
> diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
> index 2d881f34dd9d..7c54bcbf5a36 100644
> --- a/arch/arm64/mm/cache.S
> +++ b/arch/arm64/mm/cache.S
> @@ -14,6 +14,34 @@
>  #include <asm/alternative.h>
>  #include <asm/asm-uaccess.h>
>  
> +/*
> + *	__flush_cache_range(start,end) [fixup]
> + *
> + *	Ensure that the I and D caches are coherent within specified region.
> + *	This is typically used when code has been written to a memory region,
> + *	and will be executed.
> + *
> + *	- start   - virtual start address of region
> + *	- end     - virtual end address of region
> + *	- fixup   - optional label to branch to on user fault
> + */
> +.macro	__flush_cache_range, fixup
> +alternative_if ARM64_HAS_CACHE_IDC
> +	dsb     ishst
> +	b       .Ldc_skip_\@
> +alternative_else_nop_endif
> +	mov     x2, x0
> +	sub     x3, x1, x0
> +	dcache_by_line_op cvau, ish, x2, x3, x4, x5, \fixup
> +.Ldc_skip_\@:
> +alternative_if ARM64_HAS_CACHE_DIC
> +	isb
> +	b	.Lic_skip_\@
> +alternative_else_nop_endif
> +	invalidate_icache_by_line x0, x1, x2, x3, \fixup
> +.Lic_skip_\@:
> +.endm
> +
>  /*
>   *	flush_icache_range(start,end)
>   *
> @@ -25,7 +53,9 @@
>   *	- end     - virtual end address of region
>   */
>  SYM_FUNC_START(__flush_icache_range)
> -	/* FALLTHROUGH */
> +	__flush_cache_range
> +	ret
> +SYM_FUNC_END(__flush_icache_range)
>  
>  /*
>   *	__flush_cache_user_range(start,end)
> @@ -39,34 +69,15 @@ SYM_FUNC_START(__flush_icache_range)
>   */
>  SYM_FUNC_START(__flush_cache_user_range)
>  	uaccess_ttbr0_enable x2, x3, x4
> -alternative_if ARM64_HAS_CACHE_IDC
> -	dsb	ishst
> -	b	7f
> -alternative_else_nop_endif
> -	dcache_line_size x2, x3
> -	sub	x3, x2, #1
> -	bic	x4, x0, x3
> -1:
> -user_alt 9f, "dc cvau, x4",  "dc civac, x4",  ARM64_WORKAROUND_CLEAN_CACHE
> -	add	x4, x4, x2
> -	cmp	x4, x1
> -	b.lo	1b
> -	dsb	ish
>  
> -7:
> -alternative_if ARM64_HAS_CACHE_DIC
> -	isb
> -	b	8f
> -alternative_else_nop_endif
> -	invalidate_icache_by_line x0, x1, x2, x3, 9f
> -8:	mov	x0, #0
> +	__flush_cache_range 2f
> +	mov	x0, xzr
>  1:
>  	uaccess_ttbr0_disable x1, x2
>  	ret
> -9:
> +2:
>  	mov	x0, #-EFAULT
>  	b	1b
> -SYM_FUNC_END(__flush_icache_range)
>  SYM_FUNC_END(__flush_cache_user_range)
>  
>  /*
> -- 
> 2.31.1.818.g46aad6cb9e-goog
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-05-24 16:50 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-24  8:29 [PATCH v4 00/18] Tidy up cache.S Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 01/18] arm64: assembler: replace `kaddr` with `addr` Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 02/18] arm64: assembler: add conditional cache fixups Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 03/18] arm64: Apply errata to swsusp_arch_suspend_exit Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 04/18] arm64: Do not enable uaccess for flush_icache_range Fuad Tabba
2021-05-24  9:02   ` Ard Biesheuvel
2021-05-24  9:20     ` Fuad Tabba
2021-05-24  9:41       ` Ard Biesheuvel
2021-05-24  9:53         ` Mark Rutland
2021-05-24  9:57   ` Mark Rutland [this message]
2021-05-25 11:20   ` Catalin Marinas
2021-05-24  8:29 ` [PATCH v4 05/18] arm64: Do not enable uaccess for invalidate_icache_range Fuad Tabba
2021-05-25 11:21   ` Catalin Marinas
2021-05-24  8:29 ` [PATCH v4 06/18] arm64: Downgrade flush_icache_range to invalidate Fuad Tabba
2021-05-25 11:21   ` Catalin Marinas
2021-05-24  8:29 ` [PATCH v4 07/18] arm64: assembler: remove user_alt Fuad Tabba
2021-05-24  9:58   ` Mark Rutland
2021-05-24  8:29 ` [PATCH v4 08/18] arm64: Move documentation of dcache_by_line_op Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 09/18] arm64: Fix comments to refer to correct function __flush_icache_range Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 10/18] arm64: __inval_dcache_area to take end parameter instead of size Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 11/18] arm64: dcache_by_line_op " Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 12/18] arm64: __flush_dcache_area " Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 13/18] arm64: __clean_dcache_area_poc " Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 14/18] arm64: __clean_dcache_area_pop " Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 15/18] arm64: __clean_dcache_area_pou " Fuad Tabba
2021-05-24  8:29 ` [PATCH v4 16/18] arm64: sync_icache_aliases " Fuad Tabba
2021-05-24  8:30 ` [PATCH v4 17/18] arm64: Fix cache maintenance function comments Fuad Tabba
2021-05-24  8:30 ` [PATCH v4 18/18] arm64: Rename arm64-internal cache maintenance functions Fuad Tabba
2021-05-24  9:47 ` [PATCH v4 00/18] Tidy up cache.S Ard Biesheuvel
2021-05-25 18:58 ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210524095730.GB1040@C02TD0UTHF1T.local \
    --to=mark.rutland@arm.com \
    --cc=alexandru.elisei@arm.com \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.