From: Rob Herring <robh@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@chromium.org>,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
iommu@lists.linux-foundation.org, youlin.pei@mediatek.com,
anan.sun@mediatek.com, ming-fan.chen@mediatek.com,
yi.kuo@mediatek.com, anthony.huang@mediatek.com
Subject: Re: [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common
Date: Wed, 21 Jul 2021 20:53:01 -0600 [thread overview]
Message-ID: <20210722025301.GA3204448@robh.at.kernel.org> (raw)
In-Reply-To: <20210715121209.31024-3-yong.wu@mediatek.com>
On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
>
> IOMMU
> | |
> smi-common
> ------------------
> | .... |
> larb0 larb7 <-max is 8
>
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
>
> Something like:
>
> IOMMU
> | |
> smi-common
> ---------------------
> | | ...
> larb0 sub-common ... <-max is 8
> -----------
> | | ... <-max is 8 too.
> larb2 larb5
>
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
>
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile, the sub-common only has one gals clock.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.yaml | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..f79d99ebc440 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
> - mediatek,mt8192-smi-common
> - mediatek,mt8195-smi-common-vdo
> - mediatek,mt8195-smi-common-vpp
> + - mediatek,mt8195-smi-sub-common
>
> - description: for mt7623
> items:
> @@ -67,6 +68,10 @@ properties:
> minItems: 2
> maxItems: 4
>
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
If only a phandle, then s/phandle-array/phandle/
> + description: a phandle to the smi-common node above. Only for sub-common.
> +
> required:
> - compatible
> - reg
> @@ -93,6 +98,26 @@ allOf:
> - const: smi
> - const: async
>
> + - if: # only for sub common
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-smi-sub-common
> + then:
> + required:
> + - mediatek,smi
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> +
> - if: # for gen2 HW that have gals
> properties:
> compatible:
> --
> 2.18.0
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
yi.kuo@mediatek.com, srv_heupstream@mediatek.com,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Will Deacon <will@kernel.org>,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
iommu@lists.linux-foundation.org,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
anthony.huang@mediatek.com, ming-fan.chen@mediatek.com,
anan.sun@mediatek.com, Robin Murphy <robin.murphy@arm.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common
Date: Wed, 21 Jul 2021 20:53:01 -0600 [thread overview]
Message-ID: <20210722025301.GA3204448@robh.at.kernel.org> (raw)
In-Reply-To: <20210715121209.31024-3-yong.wu@mediatek.com>
On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
>
> IOMMU
> | |
> smi-common
> ------------------
> | .... |
> larb0 larb7 <-max is 8
>
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
>
> Something like:
>
> IOMMU
> | |
> smi-common
> ---------------------
> | | ...
> larb0 sub-common ... <-max is 8
> -----------
> | | ... <-max is 8 too.
> larb2 larb5
>
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
>
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile, the sub-common only has one gals clock.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.yaml | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..f79d99ebc440 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
> - mediatek,mt8192-smi-common
> - mediatek,mt8195-smi-common-vdo
> - mediatek,mt8195-smi-common-vpp
> + - mediatek,mt8195-smi-sub-common
>
> - description: for mt7623
> items:
> @@ -67,6 +68,10 @@ properties:
> minItems: 2
> maxItems: 4
>
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
If only a phandle, then s/phandle-array/phandle/
> + description: a phandle to the smi-common node above. Only for sub-common.
> +
> required:
> - compatible
> - reg
> @@ -93,6 +98,26 @@ allOf:
> - const: smi
> - const: async
>
> + - if: # only for sub common
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-smi-sub-common
> + then:
> + required:
> + - mediatek,smi
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> +
> - if: # for gen2 HW that have gals
> properties:
> compatible:
> --
> 2.18.0
>
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@chromium.org>,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
iommu@lists.linux-foundation.org, youlin.pei@mediatek.com,
anan.sun@mediatek.com, ming-fan.chen@mediatek.com,
yi.kuo@mediatek.com, anthony.huang@mediatek.com
Subject: Re: [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common
Date: Wed, 21 Jul 2021 20:53:01 -0600 [thread overview]
Message-ID: <20210722025301.GA3204448@robh.at.kernel.org> (raw)
In-Reply-To: <20210715121209.31024-3-yong.wu@mediatek.com>
On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
>
> IOMMU
> | |
> smi-common
> ------------------
> | .... |
> larb0 larb7 <-max is 8
>
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
>
> Something like:
>
> IOMMU
> | |
> smi-common
> ---------------------
> | | ...
> larb0 sub-common ... <-max is 8
> -----------
> | | ... <-max is 8 too.
> larb2 larb5
>
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
>
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile, the sub-common only has one gals clock.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.yaml | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..f79d99ebc440 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
> - mediatek,mt8192-smi-common
> - mediatek,mt8195-smi-common-vdo
> - mediatek,mt8195-smi-common-vpp
> + - mediatek,mt8195-smi-sub-common
>
> - description: for mt7623
> items:
> @@ -67,6 +68,10 @@ properties:
> minItems: 2
> maxItems: 4
>
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
If only a phandle, then s/phandle-array/phandle/
> + description: a phandle to the smi-common node above. Only for sub-common.
> +
> required:
> - compatible
> - reg
> @@ -93,6 +98,26 @@ allOf:
> - const: smi
> - const: async
>
> + - if: # only for sub common
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-smi-sub-common
> + then:
> + required:
> + - mediatek,smi
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> +
> - if: # for gen2 HW that have gals
> properties:
> compatible:
> --
> 2.18.0
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Yong Wu <yong.wu@mediatek.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Tomasz Figa <tfiga@chromium.org>,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
iommu@lists.linux-foundation.org, youlin.pei@mediatek.com,
anan.sun@mediatek.com, ming-fan.chen@mediatek.com,
yi.kuo@mediatek.com, anthony.huang@mediatek.com
Subject: Re: [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common
Date: Wed, 21 Jul 2021 20:53:01 -0600 [thread overview]
Message-ID: <20210722025301.GA3204448@robh.at.kernel.org> (raw)
In-Reply-To: <20210715121209.31024-3-yong.wu@mediatek.com>
On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
>
> IOMMU
> | |
> smi-common
> ------------------
> | .... |
> larb0 larb7 <-max is 8
>
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
>
> Something like:
>
> IOMMU
> | |
> smi-common
> ---------------------
> | | ...
> larb0 sub-common ... <-max is 8
> -----------
> | | ... <-max is 8 too.
> larb2 larb5
>
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
>
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile, the sub-common only has one gals clock.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.yaml | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..f79d99ebc440 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
> - mediatek,mt8192-smi-common
> - mediatek,mt8195-smi-common-vdo
> - mediatek,mt8195-smi-common-vpp
> + - mediatek,mt8195-smi-sub-common
>
> - description: for mt7623
> items:
> @@ -67,6 +68,10 @@ properties:
> minItems: 2
> maxItems: 4
>
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
If only a phandle, then s/phandle-array/phandle/
> + description: a phandle to the smi-common node above. Only for sub-common.
> +
> required:
> - compatible
> - reg
> @@ -93,6 +98,26 @@ allOf:
> - const: smi
> - const: async
>
> + - if: # only for sub common
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-smi-sub-common
> + then:
> + required:
> + - mediatek,smi
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> +
> - if: # for gen2 HW that have gals
> properties:
> compatible:
> --
> 2.18.0
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-22 2:53 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-15 12:11 [PATCH v2 00/11] MT8195 SMI support Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-15 12:11 ` [PATCH v2 01/11] dt-bindings: memory: mediatek: Add mt8195 smi binding Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-15 12:11 ` Yong Wu
2021-07-22 2:51 ` Rob Herring
2021-07-22 2:51 ` Rob Herring
2021-07-22 2:51 ` Rob Herring
2021-07-22 2:51 ` Rob Herring
2021-07-15 12:12 ` [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-22 2:53 ` Rob Herring [this message]
2021-07-22 2:53 ` Rob Herring
2021-07-22 2:53 ` Rob Herring
2021-07-22 2:53 ` Rob Herring
2021-07-15 12:12 ` [PATCH v2 03/11] memory: mtk-smi: Use clk_bulk clock ops Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 10:43 ` Ikjoon Jang
2021-07-21 10:43 ` Ikjoon Jang
2021-07-21 10:43 ` Ikjoon Jang
2021-07-21 10:43 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 04/11] memory: mtk-smi: Rename smi_gen to smi_type Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 05/11] memory: mtk-smi: Adjust some code position Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-21 10:44 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 06/11] memory: mtk-smi: Add error handle for smi_probe Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 10:45 ` Ikjoon Jang
2021-07-21 10:45 ` Ikjoon Jang
2021-07-21 10:45 ` Ikjoon Jang
2021-07-21 10:45 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 07/11] memory: mtk-smi: Add smi sub common support Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 11:43 ` Ikjoon Jang
2021-07-21 11:43 ` Ikjoon Jang
2021-07-21 11:43 ` Ikjoon Jang
2021-07-21 11:43 ` Ikjoon Jang
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-15 12:12 ` [PATCH v2 08/11] memory: mtk-smi: Use devm_platform_ioremap_resource Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 11:44 ` Ikjoon Jang
2021-07-21 11:44 ` Ikjoon Jang
2021-07-21 11:44 ` Ikjoon Jang
2021-07-21 11:44 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 09/11] memory: mtk-smi: mt8195: Add smi support Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 12:39 ` Ikjoon Jang
2021-07-21 12:39 ` Ikjoon Jang
2021-07-21 12:39 ` Ikjoon Jang
2021-07-21 12:39 ` Ikjoon Jang
2021-07-15 12:12 ` [PATCH v2 10/11] memory: mtk-smi: mt8195: Add initial setting for smi-common Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 12:54 ` Ikjoon Jang
2021-07-21 12:54 ` Ikjoon Jang
2021-07-21 12:54 ` Ikjoon Jang
2021-07-21 12:54 ` Ikjoon Jang
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-15 12:12 ` [PATCH v2 11/11] memory: mtk-smi: mt8195: Add initial setting for smi-larb Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-15 12:12 ` Yong Wu
2021-07-21 13:40 ` Ikjoon Jang
2021-07-21 13:40 ` Ikjoon Jang
2021-07-21 13:40 ` Ikjoon Jang
2021-07-21 13:40 ` Ikjoon Jang
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-22 6:38 ` Yong Wu
2021-07-29 6:41 ` Yong Wu
2021-07-29 6:41 ` Yong Wu
2021-07-29 6:41 ` Yong Wu
2021-07-29 6:41 ` Yong Wu
2021-08-03 5:37 ` Ikjoon Jang
2021-08-03 5:37 ` Ikjoon Jang
2021-08-03 5:37 ` Ikjoon Jang
2021-08-03 5:37 ` Ikjoon Jang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722025301.GA3204448@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=anan.sun@mediatek.com \
--cc=anthony.huang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=will@kernel.org \
--cc=yi.kuo@mediatek.com \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.