* [PATCH 1/7] hw/intc: sifive_plic: Add a reset function
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 12:00 ` Philippe Mathieu-Daudé
2021-12-08 6:42 ` [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function Alistair Francis
` (5 subsequent siblings)
6 siblings, 1 reply; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/intc/sifive_plic.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
index 877e76877c..35f097799a 100644
--- a/hw/intc/sifive_plic.c
+++ b/hw/intc/sifive_plic.c
@@ -355,6 +355,17 @@ static const MemoryRegionOps sifive_plic_ops = {
}
};
+static void sifive_plic_reset(DeviceState *dev)
+{
+ SiFivePLICState *s = SIFIVE_PLIC(dev);
+
+ memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
+ memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
+ memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
+ memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
+ memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
+}
+
/*
* parse PLIC hart/mode address offset config
*
@@ -501,6 +512,7 @@ static void sifive_plic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->reset = sifive_plic_reset;
device_class_set_props(dc, sifive_plic_properties);
dc->realize = sifive_plic_realize;
dc->vmsd = &vmstate_sifive_plic;
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 1/7] hw/intc: sifive_plic: Add a reset function
2021-12-08 6:42 ` [PATCH 1/7] hw/intc: sifive_plic: Add a reset function Alistair Francis
@ 2021-12-08 12:00 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 18+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-08 12:00 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Alistair Francis, Bin Meng, Palmer Dabbelt, bmeng.cn, alistair23
Hi Alistair,
On 12/8/21 07:42, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> hw/intc/sifive_plic.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> index 877e76877c..35f097799a 100644
> --- a/hw/intc/sifive_plic.c
> +++ b/hw/intc/sifive_plic.c
> @@ -355,6 +355,17 @@ static const MemoryRegionOps sifive_plic_ops = {
> }
> };
>
> +static void sifive_plic_reset(DeviceState *dev)
> +{
> + SiFivePLICState *s = SIFIVE_PLIC(dev);
> +
> + memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
> + memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
> + memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
> + memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
> + memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
Looking at sifive_plic_realize():
- Should we reset the external IRQs in a default state?
- Shouldn't riscv_cpu_claim_interrupts() be called at reset?
Note: parse_hart_config() name is slightly confusing since
beside parsing, it also allocates addr_config. Maybe consider
renaming?
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH 1/7] hw/intc: sifive_plic: Add a reset function
@ 2021-12-08 12:00 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 18+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-08 12:00 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23, bmeng.cn
Hi Alistair,
On 12/8/21 07:42, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> hw/intc/sifive_plic.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> index 877e76877c..35f097799a 100644
> --- a/hw/intc/sifive_plic.c
> +++ b/hw/intc/sifive_plic.c
> @@ -355,6 +355,17 @@ static const MemoryRegionOps sifive_plic_ops = {
> }
> };
>
> +static void sifive_plic_reset(DeviceState *dev)
> +{
> + SiFivePLICState *s = SIFIVE_PLIC(dev);
> +
> + memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
> + memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
> + memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
> + memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
> + memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
Looking at sifive_plic_realize():
- Should we reset the external IRQs in a default state?
- Shouldn't riscv_cpu_claim_interrupts() be called at reset?
Note: parse_hart_config() name is slightly confusing since
beside parsing, it also allocates addr_config. Maybe consider
renaming?
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH 1/7] hw/intc: sifive_plic: Add a reset function
2021-12-08 12:00 ` Philippe Mathieu-Daudé
@ 2021-12-10 2:12 ` Alistair Francis
-1 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-10 2:12 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Alistair Francis, open list:RISC-V, Bin Meng,
qemu-devel@nongnu.org Developers, Alistair Francis,
Palmer Dabbelt, Bin Meng
On Wed, Dec 8, 2021 at 10:00 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> Hi Alistair,
>
> On 12/8/21 07:42, Alistair Francis wrote:
> > From: Alistair Francis <alistair.francis@wdc.com>
> >
> > Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> > hw/intc/sifive_plic.c | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> > index 877e76877c..35f097799a 100644
> > --- a/hw/intc/sifive_plic.c
> > +++ b/hw/intc/sifive_plic.c
> > @@ -355,6 +355,17 @@ static const MemoryRegionOps sifive_plic_ops = {
> > }
> > };
> >
> > +static void sifive_plic_reset(DeviceState *dev)
> > +{
> > + SiFivePLICState *s = SIFIVE_PLIC(dev);
> > +
> > + memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
> > + memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
> > + memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
> > + memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
> > + memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
>
> Looking at sifive_plic_realize():
>
> - Should we reset the external IRQs in a default state?
Good point, I'll add that.
> - Shouldn't riscv_cpu_claim_interrupts() be called at reset?
I don't think so. riscv_cpu_claim_interrupts is a once and done call.
Alistair
>
> Note: parse_hart_config() name is slightly confusing since
> beside parsing, it also allocates addr_config. Maybe consider
> renaming?
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH 1/7] hw/intc: sifive_plic: Add a reset function
@ 2021-12-10 2:12 ` Alistair Francis
0 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-10 2:12 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Alistair Francis, qemu-devel@nongnu.org Developers,
open list:RISC-V, Palmer Dabbelt, Bin Meng, Alistair Francis,
Bin Meng
On Wed, Dec 8, 2021 at 10:00 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> Hi Alistair,
>
> On 12/8/21 07:42, Alistair Francis wrote:
> > From: Alistair Francis <alistair.francis@wdc.com>
> >
> > Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> > hw/intc/sifive_plic.c | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> > index 877e76877c..35f097799a 100644
> > --- a/hw/intc/sifive_plic.c
> > +++ b/hw/intc/sifive_plic.c
> > @@ -355,6 +355,17 @@ static const MemoryRegionOps sifive_plic_ops = {
> > }
> > };
> >
> > +static void sifive_plic_reset(DeviceState *dev)
> > +{
> > + SiFivePLICState *s = SIFIVE_PLIC(dev);
> > +
> > + memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
> > + memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
> > + memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
> > + memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
> > + memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
>
> Looking at sifive_plic_realize():
>
> - Should we reset the external IRQs in a default state?
Good point, I'll add that.
> - Shouldn't riscv_cpu_claim_interrupts() be called at reset?
I don't think so. riscv_cpu_claim_interrupts is a once and done call.
Alistair
>
> Note: parse_hart_config() name is slightly confusing since
> beside parsing, it also allocates addr_config. Maybe consider
> renaming?
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
2021-12-08 6:42 ` [PATCH 1/7] hw/intc: sifive_plic: Add a reset function Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 17:30 ` Richard Henderson
2021-12-08 6:42 ` [PATCH 3/7] hw/intc: sifive_plic: Cleanup the read function Alistair Francis
` (4 subsequent siblings)
6 siblings, 1 reply; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
hw/intc/sifive_plic.c | 82 +++++++++++++++++--------------------------
1 file changed, 33 insertions(+), 49 deletions(-)
diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
index 35f097799a..c1fa689868 100644
--- a/hw/intc/sifive_plic.c
+++ b/hw/intc/sifive_plic.c
@@ -33,6 +33,17 @@
#define RISCV_DEBUG_PLIC 0
+static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
+{
+ uint32_t end = base + num;
+
+ if (addr >= base && addr < end) {
+ return true;
+ }
+
+ return false;
+}
+
static PLICMode char_to_mode(char c)
{
switch (c) {
@@ -269,80 +280,53 @@ static void sifive_plic_write(void *opaque, hwaddr addr, uint64_t value,
{
SiFivePLICState *plic = opaque;
- /* writes must be 4 byte words */
- if ((addr & 0x3) != 0) {
- goto err;
- }
-
- if (addr >= plic->priority_base && /* 4 bytes per source */
- addr < plic->priority_base + (plic->num_sources << 2))
- {
+ if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) {
uint32_t irq = ((addr - plic->priority_base) >> 2) + 1;
+
plic->source_priority[irq] = value & 7;
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: write priority: irq=%d priority=%d\n",
- irq, plic->source_priority[irq]);
- }
sifive_plic_update(plic);
- return;
- } else if (addr >= plic->pending_base && /* 1 bit per source */
- addr < plic->pending_base + (plic->num_sources >> 3))
- {
+ } else if (addr_between(addr, plic->pending_base,
+ plic->num_sources >> 3)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid pending write: 0x%" HWADDR_PRIx "",
__func__, addr);
- return;
- } else if (addr >= plic->enable_base && /* 1 bit per source */
- addr < plic->enable_base + plic->num_addrs * plic->enable_stride)
- {
+ } else if (addr_between(addr, plic->enable_base,
+ plic->num_addrs * plic->enable_stride)) {
uint32_t addrid = (addr - plic->enable_base) / plic->enable_stride;
uint32_t wordid = (addr & (plic->enable_stride - 1)) >> 2;
+
if (wordid < plic->bitfield_words) {
plic->enable[addrid * plic->bitfield_words + wordid] = value;
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: write enable: hart%d-%c word=%d value=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode), wordid,
- plic->enable[addrid * plic->bitfield_words + wordid]);
- }
- return;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid enable write 0x%" HWADDR_PRIx "\n",
+ __func__, addr);
}
- } else if (addr >= plic->context_base && /* 4 bytes per reg */
- addr < plic->context_base + plic->num_addrs * plic->context_stride)
- {
+ } else if (addr_between(addr, plic->context_base,
+ plic->num_addrs * plic->context_stride)) {
uint32_t addrid = (addr - plic->context_base) / plic->context_stride;
uint32_t contextid = (addr & (plic->context_stride - 1));
+
if (contextid == 0) {
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: write priority: hart%d-%c priority=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode),
- plic->target_priority[addrid]);
- }
if (value <= plic->num_priorities) {
plic->target_priority[addrid] = value;
sifive_plic_update(plic);
}
- return;
} else if (contextid == 4) {
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: write claim: hart%d-%c irq=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode),
- (uint32_t)value);
- }
if (value < plic->num_sources) {
sifive_plic_set_claimed(plic, value, false);
sifive_plic_update(plic);
}
- return;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid context write 0x%" HWADDR_PRIx "\n",
+ __func__, addr);
}
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid register write 0x%" HWADDR_PRIx "\n",
+ __func__, addr);
}
-
-err:
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: Invalid register write 0x%" HWADDR_PRIx "\n",
- __func__, addr);
}
static const MemoryRegionOps sifive_plic_ops = {
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function
2021-12-08 6:42 ` [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function Alistair Francis
@ 2021-12-08 17:30 ` Richard Henderson
0 siblings, 0 replies; 18+ messages in thread
From: Richard Henderson @ 2021-12-08 17:30 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Alistair Francis, Bin Meng, Palmer Dabbelt, bmeng.cn, alistair23
On 12/7/21 10:42 PM, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> ---
> hw/intc/sifive_plic.c | 82 +++++++++++++++++--------------------------
> 1 file changed, 33 insertions(+), 49 deletions(-)
>
> diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> index 35f097799a..c1fa689868 100644
> --- a/hw/intc/sifive_plic.c
> +++ b/hw/intc/sifive_plic.c
> @@ -33,6 +33,17 @@
>
> #define RISCV_DEBUG_PLIC 0
>
> +static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
> +{
> + uint32_t end = base + num;
> +
> + if (addr >= base && addr < end) {
> + return true;
> + }
> +
> + return false;
> +}
It may well not matter for your use case, but this will fail for addresses at the end of
the range. Better as
return addr >= base && addr - base < num;
r~
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function
@ 2021-12-08 17:30 ` Richard Henderson
0 siblings, 0 replies; 18+ messages in thread
From: Richard Henderson @ 2021-12-08 17:30 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23, bmeng.cn
On 12/7/21 10:42 PM, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> ---
> hw/intc/sifive_plic.c | 82 +++++++++++++++++--------------------------
> 1 file changed, 33 insertions(+), 49 deletions(-)
>
> diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
> index 35f097799a..c1fa689868 100644
> --- a/hw/intc/sifive_plic.c
> +++ b/hw/intc/sifive_plic.c
> @@ -33,6 +33,17 @@
>
> #define RISCV_DEBUG_PLIC 0
>
> +static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
> +{
> + uint32_t end = base + num;
> +
> + if (addr >= base && addr < end) {
> + return true;
> + }
> +
> + return false;
> +}
It may well not matter for your use case, but this will fail for addresses at the end of
the range. Better as
return addr >= base && addr - base < num;
r~
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 3/7] hw/intc: sifive_plic: Cleanup the read function
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
2021-12-08 6:42 ` [PATCH 1/7] hw/intc: sifive_plic: Add a reset function Alistair Francis
2021-12-08 6:42 ` [PATCH 2/7] hw/intc: sifive_plic: Cleanup the write function Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 6:42 ` [PATCH 4/7] hw/intc: sifive_plic: Cleanup remaining functions Alistair Francis
` (3 subsequent siblings)
6 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
hw/intc/sifive_plic.c | 55 +++++++++----------------------------------
1 file changed, 11 insertions(+), 44 deletions(-)
diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
index c1fa689868..7f9715a584 100644
--- a/hw/intc/sifive_plic.c
+++ b/hw/intc/sifive_plic.c
@@ -205,70 +205,37 @@ static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size)
{
SiFivePLICState *plic = opaque;
- /* writes must be 4 byte words */
- if ((addr & 0x3) != 0) {
- goto err;
- }
-
- if (addr >= plic->priority_base && /* 4 bytes per source */
- addr < plic->priority_base + (plic->num_sources << 2))
- {
+ if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) {
uint32_t irq = ((addr - plic->priority_base) >> 2) + 1;
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: read priority: irq=%d priority=%d\n",
- irq, plic->source_priority[irq]);
- }
+
return plic->source_priority[irq];
- } else if (addr >= plic->pending_base && /* 1 bit per source */
- addr < plic->pending_base + (plic->num_sources >> 3))
- {
+ } else if (addr_between(addr, plic->pending_base, plic->num_sources >> 3)) {
uint32_t word = (addr - plic->pending_base) >> 2;
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: read pending: word=%d value=%d\n",
- word, plic->pending[word]);
- }
+
return plic->pending[word];
- } else if (addr >= plic->enable_base && /* 1 bit per source */
- addr < plic->enable_base + plic->num_addrs * plic->enable_stride)
- {
+ } else if (addr_between(addr, plic->enable_base,
+ plic->num_addrs * plic->enable_stride)) {
uint32_t addrid = (addr - plic->enable_base) / plic->enable_stride;
uint32_t wordid = (addr & (plic->enable_stride - 1)) >> 2;
+
if (wordid < plic->bitfield_words) {
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: read enable: hart%d-%c word=%d value=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode), wordid,
- plic->enable[addrid * plic->bitfield_words + wordid]);
- }
return plic->enable[addrid * plic->bitfield_words + wordid];
}
- } else if (addr >= plic->context_base && /* 1 bit per source */
- addr < plic->context_base + plic->num_addrs * plic->context_stride)
- {
+ } else if (addr_between(addr, plic->context_base,
+ plic->num_addrs * plic->context_stride)) {
uint32_t addrid = (addr - plic->context_base) / plic->context_stride;
uint32_t contextid = (addr & (plic->context_stride - 1));
+
if (contextid == 0) {
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: read priority: hart%d-%c priority=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode),
- plic->target_priority[addrid]);
- }
return plic->target_priority[addrid];
} else if (contextid == 4) {
uint32_t value = sifive_plic_claim(plic, addrid);
- if (RISCV_DEBUG_PLIC) {
- qemu_log("plic: read claim: hart%d-%c irq=%x\n",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode),
- value);
- }
+
sifive_plic_update(plic);
return value;
}
}
-err:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Invalid register read 0x%" HWADDR_PRIx "\n",
__func__, addr);
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 4/7] hw/intc: sifive_plic: Cleanup remaining functions
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
` (2 preceding siblings ...)
2021-12-08 6:42 ` [PATCH 3/7] hw/intc: sifive_plic: Cleanup the read function Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 6:42 ` [PATCH 5/7] target/riscv: Mark the Hypervisor extension as non experimental Alistair Francis
` (2 subsequent siblings)
6 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
We can remove the original sifive_plic_irqs_pending() function and
instead just use the sifive_plic_claim() function (renamed to
sifive_plic_claimed()) to determine if any interrupts are pending.
This requires move the side effects outside of sifive_plic_claimed(),
but as they are only invoked once that isn't a problem.
We have also removed all of the old #ifdef debugging logs, so let's
cleanup the last remaining debug function while we are here.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
hw/intc/sifive_plic.c | 109 +++++++++---------------------------------
1 file changed, 22 insertions(+), 87 deletions(-)
diff --git a/hw/intc/sifive_plic.c b/hw/intc/sifive_plic.c
index 7f9715a584..d9bf01b647 100644
--- a/hw/intc/sifive_plic.c
+++ b/hw/intc/sifive_plic.c
@@ -31,8 +31,6 @@
#include "migration/vmstate.h"
#include "hw/irq.h"
-#define RISCV_DEBUG_PLIC 0
-
static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
{
uint32_t end = base + num;
@@ -57,47 +55,6 @@ static PLICMode char_to_mode(char c)
}
}
-static char mode_to_char(PLICMode m)
-{
- switch (m) {
- case PLICMode_U: return 'U';
- case PLICMode_S: return 'S';
- case PLICMode_H: return 'H';
- case PLICMode_M: return 'M';
- default: return '?';
- }
-}
-
-static void sifive_plic_print_state(SiFivePLICState *plic)
-{
- int i;
- int addrid;
-
- /* pending */
- qemu_log("pending : ");
- for (i = plic->bitfield_words - 1; i >= 0; i--) {
- qemu_log("%08x", plic->pending[i]);
- }
- qemu_log("\n");
-
- /* pending */
- qemu_log("claimed : ");
- for (i = plic->bitfield_words - 1; i >= 0; i--) {
- qemu_log("%08x", plic->claimed[i]);
- }
- qemu_log("\n");
-
- for (addrid = 0; addrid < plic->num_addrs; addrid++) {
- qemu_log("hart%d-%c enable: ",
- plic->addr_config[addrid].hartid,
- mode_to_char(plic->addr_config[addrid].mode));
- for (i = plic->bitfield_words - 1; i >= 0; i--) {
- qemu_log("%08x", plic->enable[addrid * plic->bitfield_words + i]);
- }
- qemu_log("\n");
- }
-}
-
static uint32_t atomic_set_masked(uint32_t *a, uint32_t mask, uint32_t value)
{
uint32_t old, new, cmp = qatomic_read(a);
@@ -121,26 +78,34 @@ static void sifive_plic_set_claimed(SiFivePLICState *plic, int irq, bool level)
atomic_set_masked(&plic->claimed[irq >> 5], 1 << (irq & 31), -!!level);
}
-static int sifive_plic_irqs_pending(SiFivePLICState *plic, uint32_t addrid)
+static uint32_t sifive_plic_claimed(SiFivePLICState *plic, uint32_t addrid)
{
+ uint32_t max_irq = 0;
+ uint32_t max_prio = plic->target_priority[addrid];
int i, j;
+
for (i = 0; i < plic->bitfield_words; i++) {
uint32_t pending_enabled_not_claimed =
- (plic->pending[i] & ~plic->claimed[i]) &
- plic->enable[addrid * plic->bitfield_words + i];
+ (plic->pending[i] & ~plic->claimed[i]) &
+ plic->enable[addrid * plic->bitfield_words + i];
+
if (!pending_enabled_not_claimed) {
continue;
}
+
for (j = 0; j < 32; j++) {
int irq = (i << 5) + j;
uint32_t prio = plic->source_priority[irq];
int enabled = pending_enabled_not_claimed & (1 << j);
- if (enabled && prio > plic->target_priority[addrid]) {
- return 1;
+
+ if (enabled && prio > max_prio) {
+ max_irq = irq;
+ max_prio = prio;
}
}
}
- return 0;
+
+ return max_irq;
}
static void sifive_plic_update(SiFivePLICState *plic)
@@ -151,7 +116,7 @@ static void sifive_plic_update(SiFivePLICState *plic)
for (addrid = 0; addrid < plic->num_addrs; addrid++) {
uint32_t hartid = plic->addr_config[addrid].hartid;
PLICMode mode = plic->addr_config[addrid].mode;
- int level = sifive_plic_irqs_pending(plic, addrid);
+ bool level = !!sifive_plic_claimed(plic, addrid);
switch (mode) {
case PLICMode_M:
@@ -164,41 +129,6 @@ static void sifive_plic_update(SiFivePLICState *plic)
break;
}
}
-
- if (RISCV_DEBUG_PLIC) {
- sifive_plic_print_state(plic);
- }
-}
-
-static uint32_t sifive_plic_claim(SiFivePLICState *plic, uint32_t addrid)
-{
- int i, j;
- uint32_t max_irq = 0;
- uint32_t max_prio = plic->target_priority[addrid];
-
- for (i = 0; i < plic->bitfield_words; i++) {
- uint32_t pending_enabled_not_claimed =
- (plic->pending[i] & ~plic->claimed[i]) &
- plic->enable[addrid * plic->bitfield_words + i];
- if (!pending_enabled_not_claimed) {
- continue;
- }
- for (j = 0; j < 32; j++) {
- int irq = (i << 5) + j;
- uint32_t prio = plic->source_priority[irq];
- int enabled = pending_enabled_not_claimed & (1 << j);
- if (enabled && prio > max_prio) {
- max_irq = irq;
- max_prio = prio;
- }
- }
- }
-
- if (max_irq) {
- sifive_plic_set_pending(plic, max_irq, false);
- sifive_plic_set_claimed(plic, max_irq, true);
- }
- return max_irq;
}
static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size)
@@ -229,10 +159,15 @@ static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size)
if (contextid == 0) {
return plic->target_priority[addrid];
} else if (contextid == 4) {
- uint32_t value = sifive_plic_claim(plic, addrid);
+ uint32_t max_irq = sifive_plic_claimed(plic, addrid);
+
+ if (max_irq) {
+ sifive_plic_set_pending(plic, max_irq, false);
+ sifive_plic_set_claimed(plic, max_irq, true);
+ }
sifive_plic_update(plic);
- return value;
+ return max_irq;
}
}
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 5/7] target/riscv: Mark the Hypervisor extension as non experimental
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
` (3 preceding siblings ...)
2021-12-08 6:42 ` [PATCH 4/7] hw/intc: sifive_plic: Cleanup remaining functions Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 6:42 ` [PATCH 6/7] target/riscv: Enable the Hypervisor extension by default Alistair Francis
2021-12-08 6:42 ` [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation Alistair Francis
6 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
The Hypervisor spec is now frozen, so remove the experimental tag.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index f812998123..1edb2771b4 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -626,6 +626,7 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_BOOL("c", RISCVCPU, cfg.ext_c, true),
DEFINE_PROP_BOOL("s", RISCVCPU, cfg.ext_s, true),
DEFINE_PROP_BOOL("u", RISCVCPU, cfg.ext_u, true),
+ DEFINE_PROP_BOOL("h", RISCVCPU, cfg.ext_h, false),
DEFINE_PROP_BOOL("Counters", RISCVCPU, cfg.ext_counters, true),
DEFINE_PROP_BOOL("Zifencei", RISCVCPU, cfg.ext_ifencei, true),
DEFINE_PROP_BOOL("Zicsr", RISCVCPU, cfg.ext_icsr, true),
@@ -639,7 +640,6 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_BOOL("x-zbb", RISCVCPU, cfg.ext_zbb, false),
DEFINE_PROP_BOOL("x-zbc", RISCVCPU, cfg.ext_zbc, false),
DEFINE_PROP_BOOL("x-zbs", RISCVCPU, cfg.ext_zbs, false),
- DEFINE_PROP_BOOL("x-h", RISCVCPU, cfg.ext_h, false),
DEFINE_PROP_BOOL("x-j", RISCVCPU, cfg.ext_j, false),
DEFINE_PROP_BOOL("x-v", RISCVCPU, cfg.ext_v, false),
DEFINE_PROP_STRING("vext_spec", RISCVCPU, cfg.vext_spec),
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 6/7] target/riscv: Enable the Hypervisor extension by default
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
` (4 preceding siblings ...)
2021-12-08 6:42 ` [PATCH 5/7] target/riscv: Mark the Hypervisor extension as non experimental Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 6:42 ` [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation Alistair Francis
6 siblings, 0 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn
From: Alistair Francis <alistair.francis@wdc.com>
Let's enable the Hypervisor extension by default. This doesn't affect
named CPUs (such as lowrisc-ibex or sifive-u54) but does enable the
Hypervisor extensions by default for the virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1edb2771b4..013a8760b5 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -626,7 +626,7 @@ static Property riscv_cpu_properties[] = {
DEFINE_PROP_BOOL("c", RISCVCPU, cfg.ext_c, true),
DEFINE_PROP_BOOL("s", RISCVCPU, cfg.ext_s, true),
DEFINE_PROP_BOOL("u", RISCVCPU, cfg.ext_u, true),
- DEFINE_PROP_BOOL("h", RISCVCPU, cfg.ext_h, false),
+ DEFINE_PROP_BOOL("h", RISCVCPU, cfg.ext_h, true),
DEFINE_PROP_BOOL("Counters", RISCVCPU, cfg.ext_counters, true),
DEFINE_PROP_BOOL("Zifencei", RISCVCPU, cfg.ext_ifencei, true),
DEFINE_PROP_BOOL("Zicsr", RISCVCPU, cfg.ext_icsr, true),
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation
2021-12-08 6:42 [PATCH 0/7] A collection of RISC-V cleanups and improvements Alistair Francis
` (5 preceding siblings ...)
2021-12-08 6:42 ` [PATCH 6/7] target/riscv: Enable the Hypervisor extension by default Alistair Francis
@ 2021-12-08 6:42 ` Alistair Francis
2021-12-08 11:51 ` Philippe Mathieu-Daudé
2021-12-10 7:10 ` Markus Armbruster
6 siblings, 2 replies; 18+ messages in thread
From: Alistair Francis @ 2021-12-08 6:42 UTC (permalink / raw)
To: qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23,
Alistair Francis, bmeng.cn, Markus Armbruster
From: Alistair Francis <alistair.francis@wdc.com>
When realising the SoC use error_fatal instead of error_abort as the
process can fail and report useful information to the user.
Currently a user can see this:
$ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
QEMU 6.1.93 monitor - type 'help' for more information
(qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
qemu-system-riscv64: OTP drive size < 16K
Aborted (core dumped)
Which this patch addresses
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
---
hw/riscv/microchip_pfsoc.c | 2 +-
hw/riscv/opentitan.c | 2 +-
hw/riscv/sifive_e.c | 2 +-
hw/riscv/sifive_u.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
index 57d779fb55..f16e4d10eb 100644
--- a/hw/riscv/microchip_pfsoc.c
+++ b/hw/riscv/microchip_pfsoc.c
@@ -471,7 +471,7 @@ static void microchip_icicle_kit_machine_init(MachineState *machine)
/* Initialize SoC */
object_initialize_child(OBJECT(machine), "soc", &s->soc,
TYPE_MICROCHIP_PFSOC);
- qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
/* Split RAM into low and high regions using aliases to machine->ram */
mem_low_size = memmap[MICROCHIP_PFSOC_DRAM_LO].size;
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index c531450b9f..0856c347e8 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -80,7 +80,7 @@ static void opentitan_board_init(MachineState *machine)
/* Initialize SoC */
object_initialize_child(OBJECT(machine), "soc", &s->soc,
TYPE_RISCV_IBEX_SOC);
- qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
memory_region_add_subregion(sys_mem,
memmap[IBEX_DEV_RAM].base, machine->ram);
diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
index 9b206407a6..dcb87b6cfd 100644
--- a/hw/riscv/sifive_e.c
+++ b/hw/riscv/sifive_e.c
@@ -88,7 +88,7 @@ static void sifive_e_machine_init(MachineState *machine)
/* Initialize SoC */
object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_E_SOC);
- qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
/* Data Tightly Integrated Memory */
memory_region_add_subregion(sys_mem,
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 589ae72a59..d576484851 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -545,7 +545,7 @@ static void sifive_u_machine_init(MachineState *machine)
&error_abort);
object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type,
&error_abort);
- qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
+ qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
/* register RAM */
memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base,
--
2.31.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation
2021-12-08 6:42 ` [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation Alistair Francis
@ 2021-12-08 11:51 ` Philippe Mathieu-Daudé
2021-12-10 7:10 ` Markus Armbruster
1 sibling, 0 replies; 18+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-08 11:51 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Bin Meng, Markus Armbruster, Alistair Francis, alistair23,
Palmer Dabbelt, bmeng.cn
On 12/8/21 07:42, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> When realising the SoC use error_fatal instead of error_abort as the
> process can fail and report useful information to the user.
>
> Currently a user can see this:
>
> $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
> QEMU 6.1.93 monitor - type 'help' for more information
> (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
> qemu-system-riscv64: OTP drive size < 16K
> Aborted (core dumped)
>
> Which this patch addresses
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reported-by: Markus Armbruster <armbru@redhat.com>
> ---
> hw/riscv/microchip_pfsoc.c | 2 +-
> hw/riscv/opentitan.c | 2 +-
> hw/riscv/sifive_e.c | 2 +-
> hw/riscv/sifive_u.c | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation
@ 2021-12-08 11:51 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 18+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-08 11:51 UTC (permalink / raw)
To: Alistair Francis, qemu-devel, qemu-riscv
Cc: Palmer Dabbelt, Bin Meng, Alistair Francis, alistair23, bmeng.cn,
Markus Armbruster
On 12/8/21 07:42, Alistair Francis wrote:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> When realising the SoC use error_fatal instead of error_abort as the
> process can fail and report useful information to the user.
>
> Currently a user can see this:
>
> $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
> QEMU 6.1.93 monitor - type 'help' for more information
> (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
> qemu-system-riscv64: OTP drive size < 16K
> Aborted (core dumped)
>
> Which this patch addresses
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reported-by: Markus Armbruster <armbru@redhat.com>
> ---
> hw/riscv/microchip_pfsoc.c | 2 +-
> hw/riscv/opentitan.c | 2 +-
> hw/riscv/sifive_e.c | 2 +-
> hw/riscv/sifive_u.c | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation
2021-12-08 6:42 ` [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation Alistair Francis
@ 2021-12-10 7:10 ` Markus Armbruster
2021-12-10 7:10 ` Markus Armbruster
1 sibling, 0 replies; 18+ messages in thread
From: Markus Armbruster @ 2021-12-10 7:10 UTC (permalink / raw)
To: Alistair Francis
Cc: qemu-riscv, Bin Meng, qemu-devel, Palmer Dabbelt, alistair23,
Alistair Francis, bmeng.cn
Alistair Francis <alistair.francis@opensource.wdc.com> writes:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> When realising the SoC use error_fatal instead of error_abort as the
> process can fail and report useful information to the user.
>
> Currently a user can see this:
>
> $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
> QEMU 6.1.93 monitor - type 'help' for more information
> (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
> qemu-system-riscv64: OTP drive size < 16K
> Aborted (core dumped)
>
> Which this patch addresses
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 7/7] hw/riscv: Use error_fatal for SoC realisation
@ 2021-12-10 7:10 ` Markus Armbruster
0 siblings, 0 replies; 18+ messages in thread
From: Markus Armbruster @ 2021-12-10 7:10 UTC (permalink / raw)
To: Alistair Francis
Cc: qemu-devel, qemu-riscv, Palmer Dabbelt, Bin Meng,
Alistair Francis, alistair23, bmeng.cn
Alistair Francis <alistair.francis@opensource.wdc.com> writes:
> From: Alistair Francis <alistair.francis@wdc.com>
>
> When realising the SoC use error_fatal instead of error_abort as the
> process can fail and report useful information to the user.
>
> Currently a user can see this:
>
> $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
> QEMU 6.1.93 monitor - type 'help' for more information
> (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
> qemu-system-riscv64: OTP drive size < 16K
> Aborted (core dumped)
>
> Which this patch addresses
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 18+ messages in thread