[PATCH 07/18] PCI: pciehp: Enable Command Completed Interrupt only if supported

["Marek Behún" <kabel@kernel.org>]

From: Pali Rohár <pali@kernel.org>

The No Command Completed Support bit in the Slot Capabilities register
indicates whether Command Completed Interrupt Enable is unsupported.

Enable this interrupt only in the case it is supported.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/hotplug/pciehp_hpc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 373bb396fe22..838eb6cc3ec7 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -817,7 +817,9 @@ static void pcie_enable_notification(struct controller *ctrl)
 	else
 		cmd |= PCI_EXP_SLTCTL_PDCE;
 	if (!pciehp_poll_mode)
-		cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
+		cmd |= PCI_EXP_SLTCTL_HPIE;
+	if (!pciehp_poll_mode && !NO_CMD_CMPL(ctrl))
+		cmd |= PCI_EXP_SLTCTL_CCIE;
 
 	mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
 		PCI_EXP_SLTCTL_PFDE |
-- 
2.34.1