All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<robh@kernel.org>,
	Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v3 10/12] ath11k: WMI changes to support WCN6750
Date: Mon, 28 Mar 2022 15:18:36 +0530	[thread overview]
Message-ID: <20220328094838.14093-11-quic_mpubbise@quicinc.com> (raw)
In-Reply-To: <20220328094838.14093-1-quic_mpubbise@quicinc.com>

WCN6750 is a single PDEV non-DBS chip which supports 2G, 5G and 6G bands.
It is a single LMAC device which can be either hooked to 2G/5G/6G bands.
Add WMI changes to support WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 119fe1e6a07a..b814d43672df 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -391,6 +391,10 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 	ab->target_pdev_ids[ab->target_pdev_count].pdev_id = mac_phy_caps->pdev_id;
 	ab->target_pdev_count++;
 
+	if (!(mac_phy_caps->supported_bands & WMI_HOST_WLAN_2G_CAP) &&
+	    !(mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP))
+		return -EINVAL;
+
 	/* Take non-zero tx/rx chainmask. If tx/rx chainmask differs from
 	 * band to band for a single radio, need to see how this should be
 	 * handled.
@@ -398,7 +402,9 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 	if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_2G_CAP) {
 		pdev_cap->tx_chain_mask = mac_phy_caps->tx_chain_mask_2g;
 		pdev_cap->rx_chain_mask = mac_phy_caps->rx_chain_mask_2g;
-	} else if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP) {
+	}
+
+	if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP) {
 		pdev_cap->vht_cap = mac_phy_caps->vht_cap_info_5g;
 		pdev_cap->vht_mcs = mac_phy_caps->vht_supp_mcs_5g;
 		pdev_cap->he_mcs = mac_phy_caps->he_supp_mcs_5g;
@@ -408,8 +414,6 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 			WMI_NSS_RATIO_ENABLE_DISABLE_GET(mac_phy_caps->nss_ratio);
 		pdev_cap->nss_ratio_info =
 			WMI_NSS_RATIO_INFO_GET(mac_phy_caps->nss_ratio);
-	} else {
-		return -EINVAL;
 	}
 
 	/* tx/rx chainmask reported from fw depends on the actual hw chains used,
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<robh@kernel.org>,
	Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v3 10/12] ath11k: WMI changes to support WCN6750
Date: Mon, 28 Mar 2022 15:18:36 +0530	[thread overview]
Message-ID: <20220328094838.14093-11-quic_mpubbise@quicinc.com> (raw)
In-Reply-To: <20220328094838.14093-1-quic_mpubbise@quicinc.com>

WCN6750 is a single PDEV non-DBS chip which supports 2G, 5G and 6G bands.
It is a single LMAC device which can be either hooked to 2G/5G/6G bands.
Add WMI changes to support WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 119fe1e6a07a..b814d43672df 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -391,6 +391,10 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 	ab->target_pdev_ids[ab->target_pdev_count].pdev_id = mac_phy_caps->pdev_id;
 	ab->target_pdev_count++;
 
+	if (!(mac_phy_caps->supported_bands & WMI_HOST_WLAN_2G_CAP) &&
+	    !(mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP))
+		return -EINVAL;
+
 	/* Take non-zero tx/rx chainmask. If tx/rx chainmask differs from
 	 * band to band for a single radio, need to see how this should be
 	 * handled.
@@ -398,7 +402,9 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 	if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_2G_CAP) {
 		pdev_cap->tx_chain_mask = mac_phy_caps->tx_chain_mask_2g;
 		pdev_cap->rx_chain_mask = mac_phy_caps->rx_chain_mask_2g;
-	} else if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP) {
+	}
+
+	if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP) {
 		pdev_cap->vht_cap = mac_phy_caps->vht_cap_info_5g;
 		pdev_cap->vht_mcs = mac_phy_caps->vht_supp_mcs_5g;
 		pdev_cap->he_mcs = mac_phy_caps->he_supp_mcs_5g;
@@ -408,8 +414,6 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
 			WMI_NSS_RATIO_ENABLE_DISABLE_GET(mac_phy_caps->nss_ratio);
 		pdev_cap->nss_ratio_info =
 			WMI_NSS_RATIO_INFO_GET(mac_phy_caps->nss_ratio);
-	} else {
-		return -EINVAL;
 	}
 
 	/* tx/rx chainmask reported from fw depends on the actual hw chains used,
-- 
2.35.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2022-03-28  9:49 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-28  9:48 [PATCH v3 00/12] add support for WCN6750 Manikanta Pubbisetty
2022-03-28  9:48 ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-29 23:37   ` Rob Herring
2022-03-29 23:37     ` Rob Herring
2022-03-30  5:19     ` Manikanta Pubbisetty
2022-03-30  5:19       ` Manikanta Pubbisetty
2022-04-04 19:11   ` Matthias Kaehlcke
2022-04-04 19:11     ` Matthias Kaehlcke
2022-04-05  6:25     ` Manikanta Pubbisetty
2022-04-05  6:25       ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 02/12] ath11k: Add HW params for WCN6750 Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 03/12] ath11k: Add bus " Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 04/12] ath11k: Add register access logic " Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 05/12] ath11k: Fetch device information via QMI " Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 06/12] ath11k: Add QMI changes " Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 07/12] ath11k: HAL changes to support WCN6750 Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 08/12] ath11k: Datapath " Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 09/12] ath11k: Do not put HW in DBS mode for WCN6750 Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` Manikanta Pubbisetty [this message]
2022-03-28  9:48   ` [PATCH v3 10/12] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 11/12] ath11k: Update WBM idle ring HP after FW mode on Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
2022-03-28  9:48 ` [PATCH v3 12/12] ath11k: Add support for WCN6750 device Manikanta Pubbisetty
2022-03-28  9:48   ` Manikanta Pubbisetty
  -- strict thread matches above, loose matches on Subject: below --
2022-03-28  6:09 [PATCH v3 00/12] add support for WCN6750 Manikanta Pubbisetty
2022-03-28  6:09 ` [PATCH v3 10/12] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty
2022-03-28  6:09   ` Manikanta Pubbisetty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220328094838.14093-11-quic_mpubbise@quicinc.com \
    --to=quic_mpubbise@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.