From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>, <robh@kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH v3 08/12] ath11k: Datapath changes to support WCN6750 Date: Mon, 28 Mar 2022 15:18:34 +0530 [thread overview] Message-ID: <20220328094838.14093-9-quic_mpubbise@quicinc.com> (raw) In-Reply-To: <20220328094838.14093-1-quic_mpubbise@quicinc.com> HAL RX descriptor for WCN6750 is same as QCN9074, so use the DP APIs of QCN9074 for WCN6750. There is one change wrt to REO configuration though, REO configuration for WCN6750 is same as WCN6855; Therefore, use reo_setup() of WCN6855 for WCN6750. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 1 + drivers/net/wireless/ath/ath11k/hw.c | 32 ++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index cbdc6dee6721..1955426ca549 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -483,6 +483,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .num_vdevs = 16 + 1, .num_peers = 512, .supports_suspend = false, + .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074), .supports_regdb = true, .fix_l1ss = false, .credit_flow = true, diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c index c39e97e91a8c..3b9e45f9705c 100644 --- a/drivers/net/wireless/ath/ath11k/hw.c +++ b/drivers/net/wireless/ath/ath11k/hw.c @@ -1020,6 +1020,38 @@ const struct ath11k_hw_ops wcn6750_ops = { .wmi_init_config = ath11k_init_wmi_config_qca6390, .mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_qca6390, .mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_qca6390, + .tx_mesh_enable = ath11k_hw_qcn9074_tx_mesh_enable, + .rx_desc_get_first_msdu = ath11k_hw_qcn9074_rx_desc_get_first_msdu, + .rx_desc_get_last_msdu = ath11k_hw_qcn9074_rx_desc_get_last_msdu, + .rx_desc_get_l3_pad_bytes = ath11k_hw_qcn9074_rx_desc_get_l3_pad_bytes, + .rx_desc_get_hdr_status = ath11k_hw_qcn9074_rx_desc_get_hdr_status, + .rx_desc_encrypt_valid = ath11k_hw_qcn9074_rx_desc_encrypt_valid, + .rx_desc_get_encrypt_type = ath11k_hw_qcn9074_rx_desc_get_encrypt_type, + .rx_desc_get_decap_type = ath11k_hw_qcn9074_rx_desc_get_decap_type, + .rx_desc_get_mesh_ctl = ath11k_hw_qcn9074_rx_desc_get_mesh_ctl, + .rx_desc_get_ldpc_support = ath11k_hw_qcn9074_rx_desc_get_ldpc_support, + .rx_desc_get_mpdu_seq_ctl_vld = ath11k_hw_qcn9074_rx_desc_get_mpdu_seq_ctl_vld, + .rx_desc_get_mpdu_fc_valid = ath11k_hw_qcn9074_rx_desc_get_mpdu_fc_valid, + .rx_desc_get_mpdu_start_seq_no = ath11k_hw_qcn9074_rx_desc_get_mpdu_start_seq_no, + .rx_desc_get_msdu_len = ath11k_hw_qcn9074_rx_desc_get_msdu_len, + .rx_desc_get_msdu_sgi = ath11k_hw_qcn9074_rx_desc_get_msdu_sgi, + .rx_desc_get_msdu_rate_mcs = ath11k_hw_qcn9074_rx_desc_get_msdu_rate_mcs, + .rx_desc_get_msdu_rx_bw = ath11k_hw_qcn9074_rx_desc_get_msdu_rx_bw, + .rx_desc_get_msdu_freq = ath11k_hw_qcn9074_rx_desc_get_msdu_freq, + .rx_desc_get_msdu_pkt_type = ath11k_hw_qcn9074_rx_desc_get_msdu_pkt_type, + .rx_desc_get_msdu_nss = ath11k_hw_qcn9074_rx_desc_get_msdu_nss, + .rx_desc_get_mpdu_tid = ath11k_hw_qcn9074_rx_desc_get_mpdu_tid, + .rx_desc_get_mpdu_peer_id = ath11k_hw_qcn9074_rx_desc_get_mpdu_peer_id, + .rx_desc_copy_attn_end_tlv = ath11k_hw_qcn9074_rx_desc_copy_attn_end, + .rx_desc_get_mpdu_start_tag = ath11k_hw_qcn9074_rx_desc_get_mpdu_start_tag, + .rx_desc_get_mpdu_ppdu_id = ath11k_hw_qcn9074_rx_desc_get_mpdu_ppdu_id, + .rx_desc_set_msdu_len = ath11k_hw_qcn9074_rx_desc_set_msdu_len, + .rx_desc_get_attention = ath11k_hw_qcn9074_rx_desc_get_attention, + .rx_desc_get_msdu_payload = ath11k_hw_qcn9074_rx_desc_get_msdu_payload, + .reo_setup = ath11k_hw_wcn6855_reo_setup, + .mpdu_info_get_peerid = ath11k_hw_ipq8074_mpdu_info_get_peerid, + .rx_desc_mac_addr2_valid = ath11k_hw_ipq9074_rx_desc_mac_addr2_valid, + .rx_desc_mpdu_start_addr2 = ath11k_hw_ipq9074_rx_desc_mpdu_start_addr2, }; #define ATH11K_TX_RING_MASK_0 0x1 -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>, <robh@kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH v3 08/12] ath11k: Datapath changes to support WCN6750 Date: Mon, 28 Mar 2022 15:18:34 +0530 [thread overview] Message-ID: <20220328094838.14093-9-quic_mpubbise@quicinc.com> (raw) In-Reply-To: <20220328094838.14093-1-quic_mpubbise@quicinc.com> HAL RX descriptor for WCN6750 is same as QCN9074, so use the DP APIs of QCN9074 for WCN6750. There is one change wrt to REO configuration though, REO configuration for WCN6750 is same as WCN6855; Therefore, use reo_setup() of WCN6855 for WCN6750. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 1 + drivers/net/wireless/ath/ath11k/hw.c | 32 ++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index cbdc6dee6721..1955426ca549 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -483,6 +483,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .num_vdevs = 16 + 1, .num_peers = 512, .supports_suspend = false, + .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074), .supports_regdb = true, .fix_l1ss = false, .credit_flow = true, diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c index c39e97e91a8c..3b9e45f9705c 100644 --- a/drivers/net/wireless/ath/ath11k/hw.c +++ b/drivers/net/wireless/ath/ath11k/hw.c @@ -1020,6 +1020,38 @@ const struct ath11k_hw_ops wcn6750_ops = { .wmi_init_config = ath11k_init_wmi_config_qca6390, .mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_qca6390, .mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_qca6390, + .tx_mesh_enable = ath11k_hw_qcn9074_tx_mesh_enable, + .rx_desc_get_first_msdu = ath11k_hw_qcn9074_rx_desc_get_first_msdu, + .rx_desc_get_last_msdu = ath11k_hw_qcn9074_rx_desc_get_last_msdu, + .rx_desc_get_l3_pad_bytes = ath11k_hw_qcn9074_rx_desc_get_l3_pad_bytes, + .rx_desc_get_hdr_status = ath11k_hw_qcn9074_rx_desc_get_hdr_status, + .rx_desc_encrypt_valid = ath11k_hw_qcn9074_rx_desc_encrypt_valid, + .rx_desc_get_encrypt_type = ath11k_hw_qcn9074_rx_desc_get_encrypt_type, + .rx_desc_get_decap_type = ath11k_hw_qcn9074_rx_desc_get_decap_type, + .rx_desc_get_mesh_ctl = ath11k_hw_qcn9074_rx_desc_get_mesh_ctl, + .rx_desc_get_ldpc_support = ath11k_hw_qcn9074_rx_desc_get_ldpc_support, + .rx_desc_get_mpdu_seq_ctl_vld = ath11k_hw_qcn9074_rx_desc_get_mpdu_seq_ctl_vld, + .rx_desc_get_mpdu_fc_valid = ath11k_hw_qcn9074_rx_desc_get_mpdu_fc_valid, + .rx_desc_get_mpdu_start_seq_no = ath11k_hw_qcn9074_rx_desc_get_mpdu_start_seq_no, + .rx_desc_get_msdu_len = ath11k_hw_qcn9074_rx_desc_get_msdu_len, + .rx_desc_get_msdu_sgi = ath11k_hw_qcn9074_rx_desc_get_msdu_sgi, + .rx_desc_get_msdu_rate_mcs = ath11k_hw_qcn9074_rx_desc_get_msdu_rate_mcs, + .rx_desc_get_msdu_rx_bw = ath11k_hw_qcn9074_rx_desc_get_msdu_rx_bw, + .rx_desc_get_msdu_freq = ath11k_hw_qcn9074_rx_desc_get_msdu_freq, + .rx_desc_get_msdu_pkt_type = ath11k_hw_qcn9074_rx_desc_get_msdu_pkt_type, + .rx_desc_get_msdu_nss = ath11k_hw_qcn9074_rx_desc_get_msdu_nss, + .rx_desc_get_mpdu_tid = ath11k_hw_qcn9074_rx_desc_get_mpdu_tid, + .rx_desc_get_mpdu_peer_id = ath11k_hw_qcn9074_rx_desc_get_mpdu_peer_id, + .rx_desc_copy_attn_end_tlv = ath11k_hw_qcn9074_rx_desc_copy_attn_end, + .rx_desc_get_mpdu_start_tag = ath11k_hw_qcn9074_rx_desc_get_mpdu_start_tag, + .rx_desc_get_mpdu_ppdu_id = ath11k_hw_qcn9074_rx_desc_get_mpdu_ppdu_id, + .rx_desc_set_msdu_len = ath11k_hw_qcn9074_rx_desc_set_msdu_len, + .rx_desc_get_attention = ath11k_hw_qcn9074_rx_desc_get_attention, + .rx_desc_get_msdu_payload = ath11k_hw_qcn9074_rx_desc_get_msdu_payload, + .reo_setup = ath11k_hw_wcn6855_reo_setup, + .mpdu_info_get_peerid = ath11k_hw_ipq8074_mpdu_info_get_peerid, + .rx_desc_mac_addr2_valid = ath11k_hw_ipq9074_rx_desc_mac_addr2_valid, + .rx_desc_mpdu_start_addr2 = ath11k_hw_ipq9074_rx_desc_mpdu_start_addr2, }; #define ATH11K_TX_RING_MASK_0 0x1 -- 2.35.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2022-03-28 9:49 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-28 9:48 [PATCH v3 00/12] add support for WCN6750 Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 01/12] dt: bindings: net: add bindings of WCN6750 for ath11k Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-29 23:37 ` Rob Herring 2022-03-29 23:37 ` Rob Herring 2022-03-30 5:19 ` Manikanta Pubbisetty 2022-03-30 5:19 ` Manikanta Pubbisetty 2022-04-04 19:11 ` Matthias Kaehlcke 2022-04-04 19:11 ` Matthias Kaehlcke 2022-04-05 6:25 ` Manikanta Pubbisetty 2022-04-05 6:25 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 02/12] ath11k: Add HW params for WCN6750 Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 03/12] ath11k: Add bus " Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 04/12] ath11k: Add register access logic " Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 05/12] ath11k: Fetch device information via QMI " Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 06/12] ath11k: Add QMI changes " Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 07/12] ath11k: HAL changes to support WCN6750 Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty [this message] 2022-03-28 9:48 ` [PATCH v3 08/12] ath11k: Datapath " Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 09/12] ath11k: Do not put HW in DBS mode for WCN6750 Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 10/12] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 11/12] ath11k: Update WBM idle ring HP after FW mode on Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty 2022-03-28 9:48 ` [PATCH v3 12/12] ath11k: Add support for WCN6750 device Manikanta Pubbisetty 2022-03-28 9:48 ` Manikanta Pubbisetty -- strict thread matches above, loose matches on Subject: below -- 2022-03-28 6:09 [PATCH v3 00/12] add support for WCN6750 Manikanta Pubbisetty 2022-03-28 6:09 ` [PATCH v3 08/12] ath11k: Datapath changes to support WCN6750 Manikanta Pubbisetty 2022-03-28 6:09 ` Manikanta Pubbisetty
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220328094838.14093-9-quic_mpubbise@quicinc.com \ --to=quic_mpubbise@quicinc.com \ --cc=ath11k@lists.infradead.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.