[PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Stefan Wahren]

This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
power management driver. It's a rework of the less controversial changes
(excluding V3D GPU driver changes) so this can be reviewed and applied faster.

Changes in V2:
- add Peter's Reviewed-by
- simplify schema for rpivid_asb as suggested by Rob
- fix reference and clarify fallback & error handling in patch #7
- drop unnecessary newline in patch #9
- improve log messages as noticed by Peter

Changes since the mention series:
- fix DT schema errors
- make rpivid_asb register optional in DT schema
- avoid code duplication in BCM2835 ASB enable/disable
- rework ASB V3D handling so we don't need the V3D flag
- avoid log errors for optional register
- use a define for expected ASB_AXI_BRDG_ID result
- fix copy & paste issues in bcm2835-pm changes

[1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/

Nicolas Saenz Julienne (6):
  dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
  dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
  ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
  ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
  mfd: bcm2835-pm: Use 'reg-names' to get resources
  soc: bcm: bcm2835-power: Bypass power_on/off() calls

Stefan Wahren (5):
  dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
  mfd: bcm2835-pm: Add support for BCM2711
  soc: bcm: bcm2835-power: Refactor ASB control
  soc: bcm: bcm2835-power: Resolve ASB register macros
  soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB

 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
 .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
 arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
 arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
 drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
 drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
 include/linux/mfd/bcm2835-pm.h                |  1 +
 7 files changed, 199 insertions(+), 90 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml

-- 
2.25.1

[PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Stefan Wahren]

This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
power management driver. It's a rework of the less controversial changes
(excluding V3D GPU driver changes) so this can be reviewed and applied faster.

Changes in V2:
- add Peter's Reviewed-by
- simplify schema for rpivid_asb as suggested by Rob
- fix reference and clarify fallback & error handling in patch #7
- drop unnecessary newline in patch #9
- improve log messages as noticed by Peter

Changes since the mention series:
- fix DT schema errors
- make rpivid_asb register optional in DT schema
- avoid code duplication in BCM2835 ASB enable/disable
- rework ASB V3D handling so we don't need the V3D flag
- avoid log errors for optional register
- use a define for expected ASB_AXI_BRDG_ID result
- fix copy & paste issues in bcm2835-pm changes

[1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/

Nicolas Saenz Julienne (6):
  dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
  dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
  ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
  ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
  mfd: bcm2835-pm: Use 'reg-names' to get resources
  soc: bcm: bcm2835-power: Bypass power_on/off() calls

Stefan Wahren (5):
  dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
  mfd: bcm2835-pm: Add support for BCM2711
  soc: bcm: bcm2835-power: Refactor ASB control
  soc: bcm: bcm2835-power: Resolve ASB register macros
  soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB

 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
 .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
 arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
 arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
 drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
 drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
 include/linux/mfd/bcm2835-pm.h                |  1 +
 7 files changed, 199 insertions(+), 90 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 01/11] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

This converts the brcm,bcm2835-pm bindings from text to proper schema.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 -----------
 .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 77 +++++++++++++++++++
 2 files changed, 77 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
deleted file mode 100644
index 72ff033565e5..000000000000
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-BCM2835 PM (Power domains, watchdog)
-
-The PM block controls power domains and some reset lines, and includes
-a watchdog timer.  This binding supersedes the brcm,bcm2835-pm-wdt
-binding which covered some of PM's register range and functionality.
-
-Required properties:
-
-- compatible:		Should be "brcm,bcm2835-pm"
-- reg:			Specifies base physical address and size of the two
-			  register ranges ("PM" and "ASYNC_BRIDGE" in that
-			  order)
-- clocks:		a) v3d: The V3D clock from CPRMAN
-			b) peri_image: The PERI_IMAGE clock from CPRMAN
-			c) h264: The H264 clock from CPRMAN
-			d) isp: The ISP clock from CPRMAN
-- #reset-cells: 	Should be 1.  This property follows the reset controller
-			  bindings[1].
-- #power-domain-cells:	Should be 1.  This property follows the power domain
-			  bindings[2].
-
-Optional properties:
-
-- timeout-sec:		Contains the watchdog timeout in seconds
-- system-power-controller: Whether the watchdog is controlling the
-    system power.  This node follows the power controller bindings[3].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/power/power-controller.txt
-
-Example:
-
-pm {
-	compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-	reg = <0x7e100000 0x114>,
-	      <0x7e00a000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_V3D>,
-		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-		 <&clocks BCM2835_CLOCK_H264>,
-		 <&clocks BCM2835_CLOCK_ISP>;
-	clock-names = "v3d", "peri_image", "h264", "isp";
-	system-power-controller;
-};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
new file mode 100644
index 000000000000..5d1ff0f6c8ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: ../../watchdog/watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm2835-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    items:
+      - description: PM registers
+      - description: ASB registers
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };
-- 
2.25.1

[PATCH V2 01/11] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

This converts the brcm,bcm2835-pm bindings from text to proper schema.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 -----------
 .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 77 +++++++++++++++++++
 2 files changed, 77 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
deleted file mode 100644
index 72ff033565e5..000000000000
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-BCM2835 PM (Power domains, watchdog)
-
-The PM block controls power domains and some reset lines, and includes
-a watchdog timer.  This binding supersedes the brcm,bcm2835-pm-wdt
-binding which covered some of PM's register range and functionality.
-
-Required properties:
-
-- compatible:		Should be "brcm,bcm2835-pm"
-- reg:			Specifies base physical address and size of the two
-			  register ranges ("PM" and "ASYNC_BRIDGE" in that
-			  order)
-- clocks:		a) v3d: The V3D clock from CPRMAN
-			b) peri_image: The PERI_IMAGE clock from CPRMAN
-			c) h264: The H264 clock from CPRMAN
-			d) isp: The ISP clock from CPRMAN
-- #reset-cells: 	Should be 1.  This property follows the reset controller
-			  bindings[1].
-- #power-domain-cells:	Should be 1.  This property follows the power domain
-			  bindings[2].
-
-Optional properties:
-
-- timeout-sec:		Contains the watchdog timeout in seconds
-- system-power-controller: Whether the watchdog is controlling the
-    system power.  This node follows the power controller bindings[3].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/power/power-controller.txt
-
-Example:
-
-pm {
-	compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-	reg = <0x7e100000 0x114>,
-	      <0x7e00a000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_V3D>,
-		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-		 <&clocks BCM2835_CLOCK_H264>,
-		 <&clocks BCM2835_CLOCK_ISP>;
-	clock-names = "v3d", "peri_image", "h264", "isp";
-	system-power-controller;
-};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
new file mode 100644
index 000000000000..5d1ff0f6c8ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: ../../watchdog/watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm2835-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    items:
+      - description: PM registers
+      - description: ASB registers
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Anticipating the introduction of BCM2711, of which we'll need to support
its new RPiVid ASB, introduce reg-names into bcm2835-pm's binding. This
will help to have a consistent mapping between resources and their
meaning.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 5d1ff0f6c8ce..883ab7cb96e9 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -23,9 +23,13 @@ properties:
       - const: brcm,bcm2835-pm-wdt
 
   reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
     items:
-      - description: PM registers
-      - description: ASB registers
+      - const: pm
+      - const: asb
 
   "#power-domain-cells":
     const: 1
@@ -68,6 +72,7 @@ examples:
         #reset-cells = <1>;
         reg = <0x7e100000 0x114>,
               <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
         clocks = <&clocks BCM2835_CLOCK_V3D>,
                <&clocks BCM2835_CLOCK_PERI_IMAGE>,
                <&clocks BCM2835_CLOCK_H264>,
-- 
2.25.1

[PATCH V2 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Anticipating the introduction of BCM2711, of which we'll need to support
its new RPiVid ASB, introduce reg-names into bcm2835-pm's binding. This
will help to have a consistent mapping between resources and their
meaning.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 5d1ff0f6c8ce..883ab7cb96e9 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -23,9 +23,13 @@ properties:
       - const: brcm,bcm2835-pm-wdt
 
   reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
     items:
-      - description: PM registers
-      - description: ASB registers
+      - const: pm
+      - const: asb
 
   "#power-domain-cells":
     const: 1
@@ -68,6 +72,7 @@ examples:
         #reset-cells = <1>;
         reg = <0x7e100000 0x114>,
               <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
         clocks = <&clocks BCM2835_CLOCK_V3D>,
                <&clocks BCM2835_CLOCK_PERI_IMAGE>,
                <&clocks BCM2835_CLOCK_H264>,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> Anticipating the introduction of BCM2711, of which we'll need to support
> its new RPiVid ASB, introduce reg-names into bcm2835-pm's binding. This
> will help to have a consistent mapping between resources and their
> meaning.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 5d1ff0f6c8ce..883ab7cb96e9 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -23,9 +23,13 @@ properties:
>        - const: brcm,bcm2835-pm-wdt
>
>    reg:
> +    minItems: 2
> +    maxItems: 2
> +
> +  reg-names:
>      items:
> -      - description: PM registers
> -      - description: ASB registers
> +      - const: pm
> +      - const: asb
>
>    "#power-domain-cells":
>      const: 1
> @@ -68,6 +72,7 @@ examples:
>          #reset-cells = <1>;
>          reg = <0x7e100000 0x114>,
>                <0x7e00a000 0x24>;
> +        reg-names = "pm", "asb";
>          clocks = <&clocks BCM2835_CLOCK_V3D>,
>                 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
>                 <&clocks BCM2835_CLOCK_H264>,
> --
> 2.25.1
>

Re: [PATCH V2 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> Anticipating the introduction of BCM2711, of which we'll need to support
> its new RPiVid ASB, introduce reg-names into bcm2835-pm's binding. This
> will help to have a consistent mapping between resources and their
> meaning.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 5d1ff0f6c8ce..883ab7cb96e9 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -23,9 +23,13 @@ properties:
>        - const: brcm,bcm2835-pm-wdt
>
>    reg:
> +    minItems: 2
> +    maxItems: 2
> +
> +  reg-names:
>      items:
> -      - description: PM registers
> -      - description: ASB registers
> +      - const: pm
> +      - const: asb
>
>    "#power-domain-cells":
>      const: 1
> @@ -68,6 +72,7 @@ examples:
>          #reset-cells = <1>;
>          reg = <0x7e100000 0x114>,
>                <0x7e00a000 0x24>;
> +        reg-names = "pm", "asb";
>          clocks = <&clocks BCM2835_CLOCK_V3D>,
>                 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
>                 <&clocks BCM2835_CLOCK_H264>,
> --
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Stefan Wahren]

Add a new compatible string for BCM2711 and the option to provide a
third reg property for the board's new RPiVid ASB.

In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
of this driver so far. The old ASB is still be present with ISP and H264
bits but no V3D.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 883ab7cb96e9..f448f034a33a 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -19,17 +19,21 @@ allOf:
 properties:
   compatible:
     items:
-      - const: brcm,bcm2835-pm
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
       - const: brcm,bcm2835-pm-wdt
 
   reg:
-    minItems: 2
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
 
   reg-names:
+    minItems: 2
     items:
       - const: pm
       - const: asb
+      - const: rpivid_asb
 
   "#power-domain-cells":
     const: 1
-- 
2.25.1

[PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Stefan Wahren]

Add a new compatible string for BCM2711 and the option to provide a
third reg property for the board's new RPiVid ASB.

In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
of this driver so far. The old ASB is still be present with ISP and H264
bits but no V3D.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
index 883ab7cb96e9..f448f034a33a 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -19,17 +19,21 @@ allOf:
 properties:
   compatible:
     items:
-      - const: brcm,bcm2835-pm
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
       - const: brcm,bcm2835-pm-wdt
 
   reg:
-    minItems: 2
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
 
   reg-names:
+    minItems: 2
     items:
       - const: pm
       - const: asb
+      - const: rpivid_asb
 
   "#power-domain-cells":
     const: 1
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> Add a new compatible string for BCM2711 and the option to provide a
> third reg property for the board's new RPiVid ASB.
>
> In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
> of this driver so far. The old ASB is still be present with ISP and H264
> bits but no V3D.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 883ab7cb96e9..f448f034a33a 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -19,17 +19,21 @@ allOf:
>  properties:
>    compatible:
>      items:
> -      - const: brcm,bcm2835-pm
> +      - enum:
> +          - brcm,bcm2835-pm
> +          - brcm,bcm2711-pm
>        - const: brcm,bcm2835-pm-wdt
>
>    reg:
> -    minItems: 2
> -    maxItems: 2
> +    minItems: 1
> +    maxItems: 3
>
>    reg-names:
> +    minItems: 2
>      items:
>        - const: pm
>        - const: asb
> +      - const: rpivid_asb
>
>    "#power-domain-cells":
>      const: 1
> --
> 2.25.1
>

Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> Add a new compatible string for BCM2711 and the option to provide a
> third reg property for the board's new RPiVid ASB.
>
> In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
> of this driver so far. The old ASB is still be present with ISP and H264
> bits but no V3D.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 883ab7cb96e9..f448f034a33a 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -19,17 +19,21 @@ allOf:
>  properties:
>    compatible:
>      items:
> -      - const: brcm,bcm2835-pm
> +      - enum:
> +          - brcm,bcm2835-pm
> +          - brcm,bcm2711-pm
>        - const: brcm,bcm2835-pm-wdt
>
>    reg:
> -    minItems: 2
> -    maxItems: 2
> +    minItems: 1
> +    maxItems: 3
>
>    reg-names:
> +    minItems: 2
>      items:
>        - const: pm
>        - const: asb
> +      - const: rpivid_asb
>
>    "#power-domain-cells":
>      const: 1
> --
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Rob Herring]

On Wed, Jun 01, 2022 at 02:53:36PM +0200, Stefan Wahren wrote:
> Add a new compatible string for BCM2711 and the option to provide a
> third reg property for the board's new RPiVid ASB.
> 
> In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
> of this driver so far. The old ASB is still be present with ISP and H264
> bits but no V3D.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 883ab7cb96e9..f448f034a33a 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -19,17 +19,21 @@ allOf:
>  properties:
>    compatible:
>      items:
> -      - const: brcm,bcm2835-pm
> +      - enum:
> +          - brcm,bcm2835-pm
> +          - brcm,bcm2711-pm
>        - const: brcm,bcm2835-pm-wdt
>  
>    reg:
> -    minItems: 2
> -    maxItems: 2
> +    minItems: 1

2?

> +    maxItems: 3
>  
>    reg-names:
> +    minItems: 2
>      items:
>        - const: pm
>        - const: asb
> +      - const: rpivid_asb
>  
>    "#power-domain-cells":
>      const: 1
> -- 
> 2.25.1
> 
> 

Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711

[Rob Herring]

On Wed, Jun 01, 2022 at 02:53:36PM +0200, Stefan Wahren wrote:
> Add a new compatible string for BCM2711 and the option to provide a
> third reg property for the board's new RPiVid ASB.
> 
> In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer
> of this driver so far. The old ASB is still be present with ISP and H264
> bits but no V3D.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml   | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> index 883ab7cb96e9..f448f034a33a 100644
> --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
> @@ -19,17 +19,21 @@ allOf:
>  properties:
>    compatible:
>      items:
> -      - const: brcm,bcm2835-pm
> +      - enum:
> +          - brcm,bcm2835-pm
> +          - brcm,bcm2711-pm
>        - const: brcm,bcm2835-pm-wdt
>  
>    reg:
> -    minItems: 2
> -    maxItems: 2
> +    minItems: 1

2?

> +    maxItems: 3
>  
>    reg-names:
> +    minItems: 2
>      items:
>        - const: pm
>        - const: asb
> +      - const: rpivid_asb
>  
>    "#power-domain-cells":
>      const: 1
> -- 
> 2.25.1
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 04/11] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

bcm2835-pm's bindings now support explicitly setting 'reg-names,' so use
them.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi        | 1 +
 arch/arm/boot/dts/bcm2835-common.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..cbb47e2c9434 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -113,6 +113,7 @@ pm: watchdog@7e100000 {
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index c25e797b9060..a037d2bc5b11 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -62,6 +62,7 @@ pm: watchdog@7e100000 {
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
-- 
2.25.1

[PATCH V2 04/11] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

bcm2835-pm's bindings now support explicitly setting 'reg-names,' so use
them.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi        | 1 +
 arch/arm/boot/dts/bcm2835-common.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..cbb47e2c9434 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -113,6 +113,7 @@ pm: watchdog@7e100000 {
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index c25e797b9060..a037d2bc5b11 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -62,6 +62,7 @@ pm: watchdog@7e100000 {
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 05/11] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

A new compatible string was introduced specifically for BCM2711, so make
use of it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index cbb47e2c9434..5eca5207c212 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -107,7 +107,7 @@ dma: dma@7e007000 {
 		};
 
 		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
-- 
2.25.1

[PATCH V2 05/11] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

A new compatible string was introduced specifically for BCM2711, so make
use of it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index cbb47e2c9434..5eca5207c212 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -107,7 +107,7 @@ dma: dma@7e007000 {
 		};
 
 		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 06/11] mfd: bcm2835-pm: Use 'reg-names' to get resources

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

If available in firmware, find resources by their 'reg-names' position
instead of relying on hardcoded offsets. Care is taken to support old
firmware nonetheless.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/mfd/bcm2835-pm.c | 59 +++++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 19 deletions(-)

diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
index 42fe67f1538e..c1e81a4541d7 100644
--- a/drivers/mfd/bcm2835-pm.c
+++ b/drivers/mfd/bcm2835-pm.c
@@ -25,9 +25,41 @@ static const struct mfd_cell bcm2835_power_devs[] = {
 	{ .name = "bcm2835-power" },
 };
 
+static int bcm2835_pm_get_pdata(struct platform_device *pdev,
+				struct bcm2835_pm *pm)
+{
+	/* If no 'reg-names' property is found we can assume we're using old
+	 * firmware.
+	 */
+	if (!of_find_property(pm->dev->of_node, "reg-names", NULL)) {
+		dev_warn(pm->dev, "reg-names are missing, please update your DTB.\n");
+
+		pm->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(pm->base))
+			return PTR_ERR(pm->base);
+
+		pm->asb = devm_platform_ioremap_resource(pdev, 1);
+	} else {
+		struct resource *res;
+
+		pm->base = devm_platform_ioremap_resource_byname(pdev, "pm");
+		if (IS_ERR(pm->base))
+			return PTR_ERR(pm->base);
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "asb");
+		if (res)
+			pm->asb = devm_ioremap_resource(&pdev->dev, res);
+	}
+
+	if (IS_ERR(pm->asb))
+		pm->asb = NULL;
+
+	return 0;
+}
+
 static int bcm2835_pm_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct bcm2835_pm *pm;
 	int ret;
@@ -39,10 +71,9 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 
 	pm->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pm->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pm->base))
-		return PTR_ERR(pm->base);
+	ret = bcm2835_pm_get_pdata(pdev, pm);
+	if (ret)
+		return ret;
 
 	ret = devm_mfd_add_devices(dev, -1,
 				   bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
@@ -54,20 +85,10 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 	 * bcm2835-pm binding as the key for whether we can reference
 	 * the full PM register range and support power domains.
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (res) {
-		pm->asb = devm_ioremap_resource(dev, res);
-		if (IS_ERR(pm->asb))
-			return PTR_ERR(pm->asb);
-
-		ret = devm_mfd_add_devices(dev, -1,
-					   bcm2835_power_devs,
-					   ARRAY_SIZE(bcm2835_power_devs),
-					   NULL, 0, NULL);
-		if (ret)
-			return ret;
-	}
-
+	if (pm->asb)
+		return devm_mfd_add_devices(dev, -1, bcm2835_power_devs,
+					    ARRAY_SIZE(bcm2835_power_devs),
+					    NULL, 0, NULL);
 	return 0;
 }
 
-- 
2.25.1

[PATCH V2 06/11] mfd: bcm2835-pm: Use 'reg-names' to get resources

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

If available in firmware, find resources by their 'reg-names' position
instead of relying on hardcoded offsets. Care is taken to support old
firmware nonetheless.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/mfd/bcm2835-pm.c | 59 +++++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 19 deletions(-)

diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
index 42fe67f1538e..c1e81a4541d7 100644
--- a/drivers/mfd/bcm2835-pm.c
+++ b/drivers/mfd/bcm2835-pm.c
@@ -25,9 +25,41 @@ static const struct mfd_cell bcm2835_power_devs[] = {
 	{ .name = "bcm2835-power" },
 };
 
+static int bcm2835_pm_get_pdata(struct platform_device *pdev,
+				struct bcm2835_pm *pm)
+{
+	/* If no 'reg-names' property is found we can assume we're using old
+	 * firmware.
+	 */
+	if (!of_find_property(pm->dev->of_node, "reg-names", NULL)) {
+		dev_warn(pm->dev, "reg-names are missing, please update your DTB.\n");
+
+		pm->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(pm->base))
+			return PTR_ERR(pm->base);
+
+		pm->asb = devm_platform_ioremap_resource(pdev, 1);
+	} else {
+		struct resource *res;
+
+		pm->base = devm_platform_ioremap_resource_byname(pdev, "pm");
+		if (IS_ERR(pm->base))
+			return PTR_ERR(pm->base);
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "asb");
+		if (res)
+			pm->asb = devm_ioremap_resource(&pdev->dev, res);
+	}
+
+	if (IS_ERR(pm->asb))
+		pm->asb = NULL;
+
+	return 0;
+}
+
 static int bcm2835_pm_probe(struct platform_device *pdev)
 {
-	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct bcm2835_pm *pm;
 	int ret;
@@ -39,10 +71,9 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 
 	pm->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pm->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pm->base))
-		return PTR_ERR(pm->base);
+	ret = bcm2835_pm_get_pdata(pdev, pm);
+	if (ret)
+		return ret;
 
 	ret = devm_mfd_add_devices(dev, -1,
 				   bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
@@ -54,20 +85,10 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 	 * bcm2835-pm binding as the key for whether we can reference
 	 * the full PM register range and support power domains.
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (res) {
-		pm->asb = devm_ioremap_resource(dev, res);
-		if (IS_ERR(pm->asb))
-			return PTR_ERR(pm->asb);
-
-		ret = devm_mfd_add_devices(dev, -1,
-					   bcm2835_power_devs,
-					   ARRAY_SIZE(bcm2835_power_devs),
-					   NULL, 0, NULL);
-		if (ret)
-			return ret;
-	}
-
+	if (pm->asb)
+		return devm_mfd_add_devices(dev, -1, bcm2835_power_devs,
+					    ARRAY_SIZE(bcm2835_power_devs),
+					    NULL, 0, NULL);
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 07/11] mfd: bcm2835-pm: Add support for BCM2711

[Stefan Wahren]

In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.

As per the devicetree bindings, BCM2711 will provide both the old and
new ASB resources, so get both of them and pass them into
'bcm2835-power,' which will take care of selecting which one to use
accordingly.

Since the RPiVid ASB's resources were being provided prior to formalizing
the bindings[1], also support the old DT files that didn't use
'reg-names.'

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

[1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
---
 drivers/mfd/bcm2835-pm.c       | 21 +++++++++++++++++++++
 include/linux/mfd/bcm2835-pm.h |  1 +
 2 files changed, 22 insertions(+)

diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
index c1e81a4541d7..e65aee6f9b84 100644
--- a/drivers/mfd/bcm2835-pm.c
+++ b/drivers/mfd/bcm2835-pm.c
@@ -28,6 +28,8 @@ static const struct mfd_cell bcm2835_power_devs[] = {
 static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 				struct bcm2835_pm *pm)
 {
+	bool is_bcm2711 = of_device_is_compatible(pm->dev->of_node, "brcm,bcm2711-pm");
+
 	/* If no 'reg-names' property is found we can assume we're using old
 	 * firmware.
 	 */
@@ -39,6 +41,7 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 			return PTR_ERR(pm->base);
 
 		pm->asb = devm_platform_ioremap_resource(pdev, 1);
+		pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
 	} else {
 		struct resource *res;
 
@@ -50,11 +53,28 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 						    "asb");
 		if (res)
 			pm->asb = devm_ioremap_resource(&pdev->dev, res);
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "rpivid_asb");
+		if (res)
+			pm->rpivid_asb = devm_ioremap_resource(&pdev->dev,
+								res);
 	}
 
 	if (IS_ERR(pm->asb))
 		pm->asb = NULL;
 
+	if (IS_ERR(pm->rpivid_asb))
+		pm->rpivid_asb = NULL;
+
+	/* Ensure that rpivid_asb is set only for BCM2711, so subsequent
+	 * driver can rely on this and don't get confused by broken DTB.
+	 */
+	if (pm->rpivid_asb && !is_bcm2711) {
+		dev_err(pm->dev, "Unexpected rpivid_asb register, please fix your DTB.\n");
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
@@ -95,6 +115,7 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 static const struct of_device_id bcm2835_pm_of_match[] = {
 	{ .compatible = "brcm,bcm2835-pm-wdt", },
 	{ .compatible = "brcm,bcm2835-pm", },
+	{ .compatible = "brcm,bcm2711-pm", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
index ed37dc40e82a..f70a810c55f7 100644
--- a/include/linux/mfd/bcm2835-pm.h
+++ b/include/linux/mfd/bcm2835-pm.h
@@ -9,6 +9,7 @@ struct bcm2835_pm {
 	struct device *dev;
 	void __iomem *base;
 	void __iomem *asb;
+	void __iomem *rpivid_asb;
 };
 
 #endif /* BCM2835_MFD_PM_H */
-- 
2.25.1

[PATCH V2 07/11] mfd: bcm2835-pm: Add support for BCM2711

[Stefan Wahren]

In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.

As per the devicetree bindings, BCM2711 will provide both the old and
new ASB resources, so get both of them and pass them into
'bcm2835-power,' which will take care of selecting which one to use
accordingly.

Since the RPiVid ASB's resources were being provided prior to formalizing
the bindings[1], also support the old DT files that didn't use
'reg-names.'

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

[1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
---
 drivers/mfd/bcm2835-pm.c       | 21 +++++++++++++++++++++
 include/linux/mfd/bcm2835-pm.h |  1 +
 2 files changed, 22 insertions(+)

diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
index c1e81a4541d7..e65aee6f9b84 100644
--- a/drivers/mfd/bcm2835-pm.c
+++ b/drivers/mfd/bcm2835-pm.c
@@ -28,6 +28,8 @@ static const struct mfd_cell bcm2835_power_devs[] = {
 static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 				struct bcm2835_pm *pm)
 {
+	bool is_bcm2711 = of_device_is_compatible(pm->dev->of_node, "brcm,bcm2711-pm");
+
 	/* If no 'reg-names' property is found we can assume we're using old
 	 * firmware.
 	 */
@@ -39,6 +41,7 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 			return PTR_ERR(pm->base);
 
 		pm->asb = devm_platform_ioremap_resource(pdev, 1);
+		pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
 	} else {
 		struct resource *res;
 
@@ -50,11 +53,28 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
 						    "asb");
 		if (res)
 			pm->asb = devm_ioremap_resource(&pdev->dev, res);
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "rpivid_asb");
+		if (res)
+			pm->rpivid_asb = devm_ioremap_resource(&pdev->dev,
+								res);
 	}
 
 	if (IS_ERR(pm->asb))
 		pm->asb = NULL;
 
+	if (IS_ERR(pm->rpivid_asb))
+		pm->rpivid_asb = NULL;
+
+	/* Ensure that rpivid_asb is set only for BCM2711, so subsequent
+	 * driver can rely on this and don't get confused by broken DTB.
+	 */
+	if (pm->rpivid_asb && !is_bcm2711) {
+		dev_err(pm->dev, "Unexpected rpivid_asb register, please fix your DTB.\n");
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
@@ -95,6 +115,7 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
 static const struct of_device_id bcm2835_pm_of_match[] = {
 	{ .compatible = "brcm,bcm2835-pm-wdt", },
 	{ .compatible = "brcm,bcm2835-pm", },
+	{ .compatible = "brcm,bcm2711-pm", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
index ed37dc40e82a..f70a810c55f7 100644
--- a/include/linux/mfd/bcm2835-pm.h
+++ b/include/linux/mfd/bcm2835-pm.h
@@ -9,6 +9,7 @@ struct bcm2835_pm {
 	struct device *dev;
 	void __iomem *base;
 	void __iomem *asb;
+	void __iomem *rpivid_asb;
 };
 
 #endif /* BCM2835_MFD_PM_H */
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 07/11] mfd: bcm2835-pm: Add support for BCM2711

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
> with the ISP and H264 bits, and V3D is in the same place in the new ASB
> as the old one.
>
> As per the devicetree bindings, BCM2711 will provide both the old and
> new ASB resources, so get both of them and pass them into
> 'bcm2835-power,' which will take care of selecting which one to use
> accordingly.
>
> Since the RPiVid ASB's resources were being provided prior to formalizing
> the bindings[1], also support the old DT files that didn't use
> 'reg-names.'
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> [1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
> ---
>  drivers/mfd/bcm2835-pm.c       | 21 +++++++++++++++++++++
>  include/linux/mfd/bcm2835-pm.h |  1 +
>  2 files changed, 22 insertions(+)
>
> diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
> index c1e81a4541d7..e65aee6f9b84 100644
> --- a/drivers/mfd/bcm2835-pm.c
> +++ b/drivers/mfd/bcm2835-pm.c
> @@ -28,6 +28,8 @@ static const struct mfd_cell bcm2835_power_devs[] = {
>  static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                                 struct bcm2835_pm *pm)
>  {
> +       bool is_bcm2711 = of_device_is_compatible(pm->dev->of_node, "brcm,bcm2711-pm");
> +
>         /* If no 'reg-names' property is found we can assume we're using old
>          * firmware.
>          */
> @@ -39,6 +41,7 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                         return PTR_ERR(pm->base);
>
>                 pm->asb = devm_platform_ioremap_resource(pdev, 1);
> +               pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
>         } else {
>                 struct resource *res;
>
> @@ -50,11 +53,28 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                                                     "asb");
>                 if (res)
>                         pm->asb = devm_ioremap_resource(&pdev->dev, res);
> +
> +               res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +                                                   "rpivid_asb");
> +               if (res)
> +                       pm->rpivid_asb = devm_ioremap_resource(&pdev->dev,
> +                                                               res);
>         }
>
>         if (IS_ERR(pm->asb))
>                 pm->asb = NULL;
>
> +       if (IS_ERR(pm->rpivid_asb))
> +               pm->rpivid_asb = NULL;
> +
> +       /* Ensure that rpivid_asb is set only for BCM2711, so subsequent
> +        * driver can rely on this and don't get confused by broken DTB.
> +        */
> +       if (pm->rpivid_asb && !is_bcm2711) {
> +               dev_err(pm->dev, "Unexpected rpivid_asb register, please fix your DTB.\n");
> +               return -EINVAL;
> +       }
> +
>         return 0;
>  }
>
> @@ -95,6 +115,7 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
>  static const struct of_device_id bcm2835_pm_of_match[] = {
>         { .compatible = "brcm,bcm2835-pm-wdt", },
>         { .compatible = "brcm,bcm2835-pm", },
> +       { .compatible = "brcm,bcm2711-pm", },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
> diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
> index ed37dc40e82a..f70a810c55f7 100644
> --- a/include/linux/mfd/bcm2835-pm.h
> +++ b/include/linux/mfd/bcm2835-pm.h
> @@ -9,6 +9,7 @@ struct bcm2835_pm {
>         struct device *dev;
>         void __iomem *base;
>         void __iomem *asb;
> +       void __iomem *rpivid_asb;
>  };
>
>  #endif /* BCM2835_MFD_PM_H */
> --
> 2.25.1
>

Re: [PATCH V2 07/11] mfd: bcm2835-pm: Add support for BCM2711

[Peter Robinson]

On Wed, Jun 1, 2022 at 1:54 PM Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
> with the ISP and H264 bits, and V3D is in the same place in the new ASB
> as the old one.
>
> As per the devicetree bindings, BCM2711 will provide both the old and
> new ASB resources, so get both of them and pass them into
> 'bcm2835-power,' which will take care of selecting which one to use
> accordingly.
>
> Since the RPiVid ASB's resources were being provided prior to formalizing
> the bindings[1], also support the old DT files that didn't use
> 'reg-names.'
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
> [1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
> ---
>  drivers/mfd/bcm2835-pm.c       | 21 +++++++++++++++++++++
>  include/linux/mfd/bcm2835-pm.h |  1 +
>  2 files changed, 22 insertions(+)
>
> diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
> index c1e81a4541d7..e65aee6f9b84 100644
> --- a/drivers/mfd/bcm2835-pm.c
> +++ b/drivers/mfd/bcm2835-pm.c
> @@ -28,6 +28,8 @@ static const struct mfd_cell bcm2835_power_devs[] = {
>  static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                                 struct bcm2835_pm *pm)
>  {
> +       bool is_bcm2711 = of_device_is_compatible(pm->dev->of_node, "brcm,bcm2711-pm");
> +
>         /* If no 'reg-names' property is found we can assume we're using old
>          * firmware.
>          */
> @@ -39,6 +41,7 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                         return PTR_ERR(pm->base);
>
>                 pm->asb = devm_platform_ioremap_resource(pdev, 1);
> +               pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
>         } else {
>                 struct resource *res;
>
> @@ -50,11 +53,28 @@ static int bcm2835_pm_get_pdata(struct platform_device *pdev,
>                                                     "asb");
>                 if (res)
>                         pm->asb = devm_ioremap_resource(&pdev->dev, res);
> +
> +               res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +                                                   "rpivid_asb");
> +               if (res)
> +                       pm->rpivid_asb = devm_ioremap_resource(&pdev->dev,
> +                                                               res);
>         }
>
>         if (IS_ERR(pm->asb))
>                 pm->asb = NULL;
>
> +       if (IS_ERR(pm->rpivid_asb))
> +               pm->rpivid_asb = NULL;
> +
> +       /* Ensure that rpivid_asb is set only for BCM2711, so subsequent
> +        * driver can rely on this and don't get confused by broken DTB.
> +        */
> +       if (pm->rpivid_asb && !is_bcm2711) {
> +               dev_err(pm->dev, "Unexpected rpivid_asb register, please fix your DTB.\n");
> +               return -EINVAL;
> +       }
> +
>         return 0;
>  }
>
> @@ -95,6 +115,7 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
>  static const struct of_device_id bcm2835_pm_of_match[] = {
>         { .compatible = "brcm,bcm2835-pm-wdt", },
>         { .compatible = "brcm,bcm2835-pm", },
> +       { .compatible = "brcm,bcm2711-pm", },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
> diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
> index ed37dc40e82a..f70a810c55f7 100644
> --- a/include/linux/mfd/bcm2835-pm.h
> +++ b/include/linux/mfd/bcm2835-pm.h
> @@ -9,6 +9,7 @@ struct bcm2835_pm {
>         struct device *dev;
>         void __iomem *base;
>         void __iomem *asb;
> +       void __iomem *rpivid_asb;
>  };
>
>  #endif /* BCM2835_MFD_PM_H */
> --
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 08/11] soc: bcm: bcm2835-power: Refactor ASB control

[Stefan Wahren]

The functions to control the async AXI bridges are almost identical.
So define a general function to handle it and keep the original ones as
wrapper. This should make this driver easier to extend.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 1e0041ec8132..77dc9e62b207 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -148,7 +148,7 @@ struct bcm2835_power {
 	struct reset_controller_dev reset;
 };
 
-static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
 {
 	u64 start;
 
@@ -158,7 +158,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 	start = ktime_get_ns();
 
 	/* Enable the module's async AXI bridges. */
-	ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+	if (enable) {
+		ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+	} else {
+		ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
+	}
+
 	while (ASB_READ(reg) & ASB_ACK) {
 		cpu_relax();
 		if (ktime_get_ns() - start >= 1000)
@@ -168,24 +173,14 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 	return 0;
 }
 
-static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 {
-	u64 start;
-
-	if (!reg)
-		return 0;
-
-	start = ktime_get_ns();
-
-	/* Enable the module's async AXI bridges. */
-	ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
-	while (!(ASB_READ(reg) & ASB_ACK)) {
-		cpu_relax();
-		if (ktime_get_ns() - start >= 1000)
-			return -ETIMEDOUT;
-	}
+	return bcm2835_asb_control(power, reg, true);
+}
 
-	return 0;
+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+{
+	return bcm2835_asb_control(power, reg, false);
 }
 
 static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
-- 
2.25.1

[PATCH V2 08/11] soc: bcm: bcm2835-power: Refactor ASB control

[Stefan Wahren]

The functions to control the async AXI bridges are almost identical.
So define a general function to handle it and keep the original ones as
wrapper. This should make this driver easier to extend.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 1e0041ec8132..77dc9e62b207 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -148,7 +148,7 @@ struct bcm2835_power {
 	struct reset_controller_dev reset;
 };
 
-static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
 {
 	u64 start;
 
@@ -158,7 +158,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 	start = ktime_get_ns();
 
 	/* Enable the module's async AXI bridges. */
-	ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+	if (enable) {
+		ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+	} else {
+		ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
+	}
+
 	while (ASB_READ(reg) & ASB_ACK) {
 		cpu_relax();
 		if (ktime_get_ns() - start >= 1000)
@@ -168,24 +173,14 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 	return 0;
 }
 
-static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
 {
-	u64 start;
-
-	if (!reg)
-		return 0;
-
-	start = ktime_get_ns();
-
-	/* Enable the module's async AXI bridges. */
-	ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
-	while (!(ASB_READ(reg) & ASB_ACK)) {
-		cpu_relax();
-		if (ktime_get_ns() - start >= 1000)
-			return -ETIMEDOUT;
-	}
+	return bcm2835_asb_control(power, reg, true);
+}
 
-	return 0;
+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+{
+	return bcm2835_asb_control(power, reg, false);
 }
 
 static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 09/11] soc: bcm: bcm2835-power: Resolve ASB register macros

[Stefan Wahren]

The macros in order to access the ASB registers have a hard coded base
address. So extending them for other platforms would make them harder
to read. As a solution resolve these macros.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 77dc9e62b207..9c352f66e6d5 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,9 +126,6 @@
 
 #define ASB_AXI_BRDG_ID			0x20
 
-#define ASB_READ(reg) readl(power->asb + (reg))
-#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
-
 struct bcm2835_power_domain {
 	struct generic_pm_domain base;
 	struct bcm2835_power *power;
@@ -150,7 +147,9 @@ struct bcm2835_power {
 
 static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
 {
+	void __iomem *base = power->asb;
 	u64 start;
+	u32 val;
 
 	if (!reg)
 		return 0;
@@ -159,12 +158,13 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 
 	/* Enable the module's async AXI bridges. */
 	if (enable) {
-		ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+		val = readl(base + reg) & ~ASB_REQ_STOP;
 	} else {
-		ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
+		val = readl(base + reg) | ASB_REQ_STOP;
 	}
+	writel(PM_PASSWORD | val, base + reg);
 
-	while (ASB_READ(reg) & ASB_ACK) {
+	while (readl(base + reg) & ASB_ACK) {
 		cpu_relax();
 		if (ktime_get_ns() - start >= 1000)
 			return -ETIMEDOUT;
@@ -622,7 +622,7 @@ static int bcm2835_power_probe(struct platform_device *pdev)
 	power->base = pm->base;
 	power->asb = pm->asb;
 
-	id = ASB_READ(ASB_AXI_BRDG_ID);
+	id = readl(power->asb + ASB_AXI_BRDG_ID);
 	if (id != 0x62726467 /* "BRDG" */) {
 		dev_err(dev, "ASB register ID returned 0x%08x\n", id);
 		return -ENODEV;
-- 
2.25.1

[PATCH V2 09/11] soc: bcm: bcm2835-power: Resolve ASB register macros

[Stefan Wahren]

The macros in order to access the ASB registers have a hard coded base
address. So extending them for other platforms would make them harder
to read. As a solution resolve these macros.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 77dc9e62b207..9c352f66e6d5 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,9 +126,6 @@
 
 #define ASB_AXI_BRDG_ID			0x20
 
-#define ASB_READ(reg) readl(power->asb + (reg))
-#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
-
 struct bcm2835_power_domain {
 	struct generic_pm_domain base;
 	struct bcm2835_power *power;
@@ -150,7 +147,9 @@ struct bcm2835_power {
 
 static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
 {
+	void __iomem *base = power->asb;
 	u64 start;
+	u32 val;
 
 	if (!reg)
 		return 0;
@@ -159,12 +158,13 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 
 	/* Enable the module's async AXI bridges. */
 	if (enable) {
-		ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
+		val = readl(base + reg) & ~ASB_REQ_STOP;
 	} else {
-		ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
+		val = readl(base + reg) | ASB_REQ_STOP;
 	}
+	writel(PM_PASSWORD | val, base + reg);
 
-	while (ASB_READ(reg) & ASB_ACK) {
+	while (readl(base + reg) & ASB_ACK) {
 		cpu_relax();
 		if (ktime_get_ns() - start >= 1000)
 			return -ETIMEDOUT;
@@ -622,7 +622,7 @@ static int bcm2835_power_probe(struct platform_device *pdev)
 	power->base = pm->base;
 	power->asb = pm->asb;
 
-	id = ASB_READ(ASB_AXI_BRDG_ID);
+	id = readl(power->asb + ASB_AXI_BRDG_ID);
 	if (id != 0x62726467 /* "BRDG" */) {
 		dev_err(dev, "ASB register ID returned 0x%08x\n", id);
 		return -ENODEV;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 10/11] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB

[Stefan Wahren]

In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.

Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on
BCM2711.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 9c352f66e6d5..1e06d91c0739 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,6 +126,8 @@
 
 #define ASB_AXI_BRDG_ID			0x20
 
+#define BCM2835_BRDG_ID			0x62726467
+
 struct bcm2835_power_domain {
 	struct generic_pm_domain base;
 	struct bcm2835_power *power;
@@ -139,6 +141,8 @@ struct bcm2835_power {
 	void __iomem		*base;
 	/* AXI Async bridge registers. */
 	void __iomem		*asb;
+	/* RPiVid bridge registers. */
+	void __iomem		*rpivid_asb;
 
 	struct genpd_onecell_data pd_xlate;
 	struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
@@ -151,8 +155,15 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 	u64 start;
 	u32 val;
 
-	if (!reg)
+	switch (reg) {
+	case 0:
 		return 0;
+	case ASB_V3D_S_CTRL:
+	case ASB_V3D_M_CTRL:
+		if (power->rpivid_asb)
+			base = power->rpivid_asb;
+		break;
+	}
 
 	start = ktime_get_ns();
 
@@ -621,13 +632,23 @@ static int bcm2835_power_probe(struct platform_device *pdev)
 	power->dev = dev;
 	power->base = pm->base;
 	power->asb = pm->asb;
+	power->rpivid_asb = pm->rpivid_asb;
 
 	id = readl(power->asb + ASB_AXI_BRDG_ID);
-	if (id != 0x62726467 /* "BRDG" */) {
+	if (id != BCM2835_BRDG_ID /* "BRDG" */) {
 		dev_err(dev, "ASB register ID returned 0x%08x\n", id);
 		return -ENODEV;
 	}
 
+	if (power->rpivid_asb) {
+		id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+		if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+			dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+				     id);
+			return -ENODEV;
+		}
+	}
+
 	power->pd_xlate.domains = devm_kcalloc(dev,
 					       ARRAY_SIZE(power_domain_names),
 					       sizeof(*power->pd_xlate.domains),
-- 
2.25.1

[PATCH V2 10/11] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB

[Stefan Wahren]

In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.

Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on
BCM2711.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 9c352f66e6d5..1e06d91c0739 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,6 +126,8 @@
 
 #define ASB_AXI_BRDG_ID			0x20
 
+#define BCM2835_BRDG_ID			0x62726467
+
 struct bcm2835_power_domain {
 	struct generic_pm_domain base;
 	struct bcm2835_power *power;
@@ -139,6 +141,8 @@ struct bcm2835_power {
 	void __iomem		*base;
 	/* AXI Async bridge registers. */
 	void __iomem		*asb;
+	/* RPiVid bridge registers. */
+	void __iomem		*rpivid_asb;
 
 	struct genpd_onecell_data pd_xlate;
 	struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
@@ -151,8 +155,15 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 	u64 start;
 	u32 val;
 
-	if (!reg)
+	switch (reg) {
+	case 0:
 		return 0;
+	case ASB_V3D_S_CTRL:
+	case ASB_V3D_M_CTRL:
+		if (power->rpivid_asb)
+			base = power->rpivid_asb;
+		break;
+	}
 
 	start = ktime_get_ns();
 
@@ -621,13 +632,23 @@ static int bcm2835_power_probe(struct platform_device *pdev)
 	power->dev = dev;
 	power->base = pm->base;
 	power->asb = pm->asb;
+	power->rpivid_asb = pm->rpivid_asb;
 
 	id = readl(power->asb + ASB_AXI_BRDG_ID);
-	if (id != 0x62726467 /* "BRDG" */) {
+	if (id != BCM2835_BRDG_ID /* "BRDG" */) {
 		dev_err(dev, "ASB register ID returned 0x%08x\n", id);
 		return -ENODEV;
 	}
 
+	if (power->rpivid_asb) {
+		id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+		if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+			dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+				     id);
+			return -ENODEV;
+		}
+	}
+
 	power->pd_xlate.domains = devm_kcalloc(dev,
 					       ARRAY_SIZE(power_domain_names),
 					       sizeof(*power->pd_xlate.domains),
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 11/11] soc: bcm: bcm2835-power: Bypass power_on/off() calls

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Bypass power_on/power_off() when running on BCM2711 as they are not
needed.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 1e06d91c0739..5bcd047768b6 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -198,6 +198,10 @@ static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
 {
 	struct bcm2835_power *power = pd->power;
 
+	/* We don't run this on BCM2711 */
+	if (power->rpivid_asb)
+		return 0;
+
 	/* Enable functional isolation */
 	PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
 
@@ -219,6 +223,10 @@ static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
 	int inrush;
 	bool powok;
 
+	/* We don't run this on BCM2711 */
+	if (power->rpivid_asb)
+		return 0;
+
 	/* If it was already powered on by the fw, leave it that way. */
 	if (PM_READ(pm_reg) & PM_POWUP)
 		return 0;
-- 
2.25.1

[PATCH V2 11/11] soc: bcm: bcm2835-power: Bypass power_on/off() calls

[Stefan Wahren]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Bypass power_on/power_off() when running on BCM2711 as they are not
needed.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
 drivers/soc/bcm/bcm2835-power.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 1e06d91c0739..5bcd047768b6 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -198,6 +198,10 @@ static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
 {
 	struct bcm2835_power *power = pd->power;
 
+	/* We don't run this on BCM2711 */
+	if (power->rpivid_asb)
+		return 0;
+
 	/* Enable functional isolation */
 	PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
 
@@ -219,6 +223,10 @@ static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
 	int inrush;
 	bool powok;
 
+	/* We don't run this on BCM2711 */
+	if (power->rpivid_asb)
+		return 0;
+
 	/* If it was already powered on by the fw, leave it that way. */
 	if (PM_READ(pm_reg) & PM_POWUP)
 		return 0;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Peter Robinson]

Hi Stefan,

So I've done some basic boot testing on a rpi4b, rpi4b 8gb, rpi400,
rpi3b+ and rpi zero2w but all headless/remote, overall it looks good.
I'm back home tomorrow when I can test the rpi4 series with the GPU
patches on top with full desktop/display but overall this looks fab!

Peter

> This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
> by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
> power management driver. It's a rework of the less controversial changes
> (excluding V3D GPU driver changes) so this can be reviewed and applied faster.
>
> Changes in V2:
> - add Peter's Reviewed-by
> - simplify schema for rpivid_asb as suggested by Rob
> - fix reference and clarify fallback & error handling in patch #7
> - drop unnecessary newline in patch #9
> - improve log messages as noticed by Peter
>
> Changes since the mention series:
> - fix DT schema errors
> - make rpivid_asb register optional in DT schema
> - avoid code duplication in BCM2835 ASB enable/disable
> - rework ASB V3D handling so we don't need the V3D flag
> - avoid log errors for optional register
> - use a define for expected ASB_AXI_BRDG_ID result
> - fix copy & paste issues in bcm2835-pm changes
>
> [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/
>
> Nicolas Saenz Julienne (6):
>   dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
>   dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
>   ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
>   ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
>   mfd: bcm2835-pm: Use 'reg-names' to get resources
>   soc: bcm: bcm2835-power: Bypass power_on/off() calls
>
> Stefan Wahren (5):
>   dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
>   mfd: bcm2835-pm: Add support for BCM2711
>   soc: bcm: bcm2835-power: Refactor ASB control
>   soc: bcm: bcm2835-power: Resolve ASB register macros
>   soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
>
>  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
>  .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
>  arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
>  arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
>  drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
>  drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
>  include/linux/mfd/bcm2835-pm.h                |  1 +
>  7 files changed, 199 insertions(+), 90 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
>
> --
> 2.25.1
>

Re: [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Peter Robinson]

Hi Stefan,

So I've done some basic boot testing on a rpi4b, rpi4b 8gb, rpi400,
rpi3b+ and rpi zero2w but all headless/remote, overall it looks good.
I'm back home tomorrow when I can test the rpi4 series with the GPU
patches on top with full desktop/display but overall this looks fab!

Peter

> This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
> by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
> power management driver. It's a rework of the less controversial changes
> (excluding V3D GPU driver changes) so this can be reviewed and applied faster.
>
> Changes in V2:
> - add Peter's Reviewed-by
> - simplify schema for rpivid_asb as suggested by Rob
> - fix reference and clarify fallback & error handling in patch #7
> - drop unnecessary newline in patch #9
> - improve log messages as noticed by Peter
>
> Changes since the mention series:
> - fix DT schema errors
> - make rpivid_asb register optional in DT schema
> - avoid code duplication in BCM2835 ASB enable/disable
> - rework ASB V3D handling so we don't need the V3D flag
> - avoid log errors for optional register
> - use a define for expected ASB_AXI_BRDG_ID result
> - fix copy & paste issues in bcm2835-pm changes
>
> [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/
>
> Nicolas Saenz Julienne (6):
>   dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
>   dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
>   ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
>   ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
>   mfd: bcm2835-pm: Use 'reg-names' to get resources
>   soc: bcm: bcm2835-power: Bypass power_on/off() calls
>
> Stefan Wahren (5):
>   dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
>   mfd: bcm2835-pm: Add support for BCM2711
>   soc: bcm: bcm2835-power: Refactor ASB control
>   soc: bcm: bcm2835-power: Resolve ASB register macros
>   soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
>
>  .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
>  .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
>  arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
>  arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
>  drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
>  drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
>  include/linux/mfd/bcm2835-pm.h                |  1 +
>  7 files changed, 199 insertions(+), 90 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
>
> --
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Stefan Wahren]

Hi Peter,

Am 01.06.22 um 15:19 schrieb Peter Robinson:
> Hi Stefan,
>
> So I've done some basic boot testing on a rpi4b, rpi4b 8gb, rpi400,
> rpi3b+ and rpi zero2w but all headless/remote, overall it looks good.
> I'm back home tomorrow when I can test the rpi4 series with the GPU
> patches on top with full desktop/display but overall this looks fab!

Thanks a lot for review and testing.

Stefan

>
> Peter
>
>> This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
>> by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
>> power management driver. It's a rework of the less controversial changes
>> (excluding V3D GPU driver changes) so this can be reviewed and applied faster.
>>
>> Changes in V2:
>> - add Peter's Reviewed-by
>> - simplify schema for rpivid_asb as suggested by Rob
>> - fix reference and clarify fallback & error handling in patch #7
>> - drop unnecessary newline in patch #9
>> - improve log messages as noticed by Peter
>>
>> Changes since the mention series:
>> - fix DT schema errors
>> - make rpivid_asb register optional in DT schema
>> - avoid code duplication in BCM2835 ASB enable/disable
>> - rework ASB V3D handling so we don't need the V3D flag
>> - avoid log errors for optional register
>> - use a define for expected ASB_AXI_BRDG_ID result
>> - fix copy & paste issues in bcm2835-pm changes
>>
>> [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/
>>
>> Nicolas Saenz Julienne (6):
>>    dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
>>    dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
>>    ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
>>    ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
>>    mfd: bcm2835-pm: Use 'reg-names' to get resources
>>    soc: bcm: bcm2835-power: Bypass power_on/off() calls
>>
>> Stefan Wahren (5):
>>    dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
>>    mfd: bcm2835-pm: Add support for BCM2711
>>    soc: bcm: bcm2835-power: Refactor ASB control
>>    soc: bcm: bcm2835-power: Resolve ASB register macros
>>    soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
>>
>>   .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
>>   .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
>>   arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
>>   arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
>>   drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
>>   drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
>>   include/linux/mfd/bcm2835-pm.h                |  1 +
>>   7 files changed, 199 insertions(+), 90 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
>>   create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
>>
>> --
>> 2.25.1
>>

Re: [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support

[Stefan Wahren]

Hi Peter,

Am 01.06.22 um 15:19 schrieb Peter Robinson:
> Hi Stefan,
>
> So I've done some basic boot testing on a rpi4b, rpi4b 8gb, rpi400,
> rpi3b+ and rpi zero2w but all headless/remote, overall it looks good.
> I'm back home tomorrow when I can test the rpi4 series with the GPU
> patches on top with full desktop/display but overall this looks fab!

Thanks a lot for review and testing.

Stefan

>
> Peter
>
>> This series is a split out of version 4 - Raspberry PI 4 V3D enablement send
>> by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the
>> power management driver. It's a rework of the less controversial changes
>> (excluding V3D GPU driver changes) so this can be reviewed and applied faster.
>>
>> Changes in V2:
>> - add Peter's Reviewed-by
>> - simplify schema for rpivid_asb as suggested by Rob
>> - fix reference and clarify fallback & error handling in patch #7
>> - drop unnecessary newline in patch #9
>> - improve log messages as noticed by Peter
>>
>> Changes since the mention series:
>> - fix DT schema errors
>> - make rpivid_asb register optional in DT schema
>> - avoid code duplication in BCM2835 ASB enable/disable
>> - rework ASB V3D handling so we don't need the V3D flag
>> - avoid log errors for optional register
>> - use a define for expected ASB_AXI_BRDG_ID result
>> - fix copy & paste issues in bcm2835-pm changes
>>
>> [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/
>>
>> Nicolas Saenz Julienne (6):
>>    dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
>>    dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
>>    ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
>>    ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
>>    mfd: bcm2835-pm: Use 'reg-names' to get resources
>>    soc: bcm: bcm2835-power: Bypass power_on/off() calls
>>
>> Stefan Wahren (5):
>>    dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
>>    mfd: bcm2835-pm: Add support for BCM2711
>>    soc: bcm: bcm2835-power: Refactor ASB control
>>    soc: bcm: bcm2835-power: Resolve ASB register macros
>>    soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
>>
>>   .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 46 ----------
>>   .../bindings/soc/bcm/brcm,bcm2835-pm.yaml     | 86 +++++++++++++++++++
>>   arch/arm/boot/dts/bcm2711.dtsi                |  3 +-
>>   arch/arm/boot/dts/bcm2835-common.dtsi         |  1 +
>>   drivers/mfd/bcm2835-pm.c                      | 80 +++++++++++++----
>>   drivers/soc/bcm/bcm2835-power.c               | 72 ++++++++++------
>>   include/linux/mfd/bcm2835-pm.h                |  1 +
>>   7 files changed, 199 insertions(+), 90 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
>>   create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
>>
>> --
>> 2.25.1
>>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel