All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: AngeloGioacchino Del Regno  <angelogioacchino.delregno@collabora.com>
Cc: Allen-KH Cheng <allen-kh.cheng@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Chen-Yu Tsai <wenst@chromium.org>
Subject: Re: [PATCH 4/5] arm64: dts: mt8192: Add dsi node
Date: Wed, 29 Jun 2022 19:31:34 -0400	[thread overview]
Message-ID: <20220629233134.zt5ua4v5itycjmlt@notapiano> (raw)
In-Reply-To: <730f334e-c10d-8f8b-94e6-b66a56e03320@collabora.com>

On Wed, Jun 29, 2022 at 03:42:42PM +0200, AngeloGioacchino Del Regno wrote:
> Il 29/06/22 14:13, Allen-KH Cheng ha scritto:
> > Add dsi ndoe for mt8192 SoC.

Typo: s/ndoe/node.

> > 
> > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 18 ++++++++++++++++++
> >   1 file changed, 18 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index 26d01544b4ea..72af328126de 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -1334,6 +1334,24 @@
> >   			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> >   		};
> > +		dsi0: dsi@14010000 {
> > +			compatible = "mediatek,mt8183-dsi";
> > +			reg = <0 0x14010000 0 0x1000>;
> > +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> > +			mediatek,syscon-dsi = <&mmsys 0x140>;

Also drop this syscon-dsi property.

> > +			clocks = <&mmsys CLK_MM_DSI0>,
> > +				 <&mmsys CLK_MM_DSI_DSI0>,
> > +				 <&mipi_tx0>;
> > +			clock-names = "engine", "digital", "hs";
> > +			phys = <&mipi_tx0>;
> > +			phy-names = "dphy";

It's also missing power-domains.

> 
> resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
> 
> ^^^ This is missing, please add it and resend :-)

Also, when this is added you'll need

#include <dt-bindings/reset/mt8192-resets.h>

With those addressed,

Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

Thanks,
Nícolas

> 
> > +			status = "disabled";
> > +
> > +			port {
> > +				dsi_out: endpoint { };
> > +			};
> > +		};
> > +
> >   		ovl_2l2: ovl@14014000 {
> >   			compatible = "mediatek,mt8192-disp-ovl-2l";
> >   			reg = <0 0x14014000 0 0x1000>;
> 
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Allen-KH Cheng <allen-kh.cheng@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Chen-Yu Tsai <wenst@chromium.org>
Subject: Re: [PATCH 4/5] arm64: dts: mt8192: Add dsi node
Date: Wed, 29 Jun 2022 19:31:34 -0400	[thread overview]
Message-ID: <20220629233134.zt5ua4v5itycjmlt@notapiano> (raw)
In-Reply-To: <730f334e-c10d-8f8b-94e6-b66a56e03320@collabora.com>

On Wed, Jun 29, 2022 at 03:42:42PM +0200, AngeloGioacchino Del Regno wrote:
> Il 29/06/22 14:13, Allen-KH Cheng ha scritto:
> > Add dsi ndoe for mt8192 SoC.

Typo: s/ndoe/node.

> > 
> > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 18 ++++++++++++++++++
> >   1 file changed, 18 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index 26d01544b4ea..72af328126de 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -1334,6 +1334,24 @@
> >   			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> >   		};
> > +		dsi0: dsi@14010000 {
> > +			compatible = "mediatek,mt8183-dsi";
> > +			reg = <0 0x14010000 0 0x1000>;
> > +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> > +			mediatek,syscon-dsi = <&mmsys 0x140>;

Also drop this syscon-dsi property.

> > +			clocks = <&mmsys CLK_MM_DSI0>,
> > +				 <&mmsys CLK_MM_DSI_DSI0>,
> > +				 <&mipi_tx0>;
> > +			clock-names = "engine", "digital", "hs";
> > +			phys = <&mipi_tx0>;
> > +			phy-names = "dphy";

It's also missing power-domains.

> 
> resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
> 
> ^^^ This is missing, please add it and resend :-)

Also, when this is added you'll need

#include <dt-bindings/reset/mt8192-resets.h>

With those addressed,

Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

Thanks,
Nícolas

> 
> > +			status = "disabled";
> > +
> > +			port {
> > +				dsi_out: endpoint { };
> > +			};
> > +		};
> > +
> >   		ovl_2l2: ovl@14014000 {
> >   			compatible = "mediatek,mt8192-disp-ovl-2l";
> >   			reg = <0 0x14014000 0 0x1000>;
> 
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-06-29 23:31 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-29 12:13 [PATCH 0/5] Complete driver nodes for MT8192 SoC Allen-KH Cheng
2022-06-29 12:13 ` Allen-KH Cheng
2022-06-29 12:13 ` [PATCH 1/5] arm64: dts: mt8192: Add pwm node Allen-KH Cheng
2022-06-29 12:13   ` Allen-KH Cheng
2022-06-29 23:12   ` Nícolas F. R. A. Prado
2022-06-29 23:12     ` Nícolas F. R. A. Prado
2022-06-29 12:13 ` [PATCH 2/5] arm64: dts: mt8192: Add mipi_tx node Allen-KH Cheng
2022-06-29 12:13   ` Allen-KH Cheng
2022-06-29 23:14   ` Nícolas F. R. A. Prado
2022-06-29 23:14     ` Nícolas F. R. A. Prado
2022-06-29 12:13 ` [PATCH 3/5] arm64: dts: mt8192: Add display nodes Allen-KH Cheng
2022-06-29 12:13   ` Allen-KH Cheng
2022-06-29 23:24   ` Nícolas F. R. A. Prado
2022-06-29 23:24     ` Nícolas F. R. A. Prado
2022-06-30  9:41     ` allen-kh.cheng
2022-06-30  9:41       ` allen-kh.cheng
2022-06-30 13:42       ` Nícolas F. R. A. Prado
2022-06-30 13:42         ` Nícolas F. R. A. Prado
2022-07-01  5:25         ` Chen-Yu Tsai
2022-07-01  5:25           ` Chen-Yu Tsai
2022-07-01  5:59           ` allen-kh.cheng
2022-07-01  5:59             ` allen-kh.cheng
2022-06-29 12:13 ` [PATCH 4/5] arm64: dts: mt8192: Add dsi node Allen-KH Cheng
2022-06-29 12:13   ` Allen-KH Cheng
2022-06-29 13:42   ` AngeloGioacchino Del Regno
2022-06-29 13:42     ` AngeloGioacchino Del Regno
2022-06-29 23:31     ` Nícolas F. R. A. Prado [this message]
2022-06-29 23:31       ` Nícolas F. R. A. Prado
2022-06-29 12:13 ` [PATCH 5/5] arm64: dts: mt8192: Add vcodec lat and core nodes Allen-KH Cheng
2022-06-29 12:13   ` Allen-KH Cheng
2022-06-29 23:32   ` Nícolas F. R. A. Prado
2022-06-29 23:32     ` Nícolas F. R. A. Prado

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220629233134.zt5ua4v5itycjmlt@notapiano \
    --to=nfraprado@collabora.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=allen-kh.cheng@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.